2018-12-03  Kito Cheng <kito@andestech.com>

	* riscv-opc.c: Change the type of xlen, because type of
	xlen_requirement changed.

2018-12-03  Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>

	PR 23193
        PR 19721
        * aarch64-tbl.h (aarch64_opcode_table): Only disassemble an ORR
	encoding as MOV if the shift operation is a left shift of zero.

2018-11-29  Jim Wilson  <jimw@sifive.com>

	* riscv-opc.c (unimp): Mark compressed unimp as INSN_ALIAS.
	(c.unimp): New.

2018-11-27  Jim Wilson  <jimw@sifive.com>

	* riscv-opc.c (ciw): Fix whitespace to align columns.
	(ca): New.

2018-11-21  John Darrington  <john@darrington.wattle.id.au>

	* s12z-dis.c (print_insn_shift) [SB_REG_REG_N]: Enter special case
	if the postbyte matches the appropriate pattern.

2018-11-13  Francois H. Theron <francois.theron@netronome.com>

	* nfp-dis.c: Fix crc[] disassembly if operands are swapped.

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-opc.c (aarch64_sys_regs_dc): New entries for
	IGVAC, IGSW, CGSW, CIGSW, CGVAC, CGVAP, CGVADP, CIGVAC, GVA,
	IGDVAC, IGDSW, CGDSW, CIGDSW, CGDVAC, CGDVAP, CGDVADP,
	CIGDVAC and GZVA.
	(aarch64_sys_ins_reg_supported_p): New check for above.

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-opc.c (aarch64_sys_regs): New entries for TCO,
	TFSRE0_SL1, TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12,
	RGSR_EL1 and GCR_EL1.
	(aarch64_sys_reg_supported_p): New check for above.
	(aarch64_pstatefields): New entry for TCO.
	(aarch64_pstatefield_supported_p): New check for above.

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
	* aarch64-asm.h (ins_addr_simple_2): Declare the above.
	* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
	* aarch64-dis.h (ext_addr_simple_2): Declare the above.
	* aarch64-opc.c (operand_general_constraint_met_p): Add case for
	AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
	(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
	* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
	(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
	* aarch64-asm-2.c: Regenerated.
	* aarch64-dis-2.c: Regenerated.
	* aarch64-opc-2.c: Regenerated.

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-tbl.h (QL_LDG): New.
	(aarch64_opcode_table): Add ldg.
	* aarch64-asm-2.c: Regenerated.
	* aarch64-dis-2.c: Regenerated.
	* aarch64-opc-2.c: Regenerated.

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
	for AARCH64_OPND_QLF_imm_tag.
	(operand_general_constraint_met_p): Add case for
	AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
	(aarch64_print_operand): Likewise.
	* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
	(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
	for both offset and pre/post indexed versions.
	(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
	* aarch64-asm-2.c: Regenerated.
	* aarch64-dis-2.c: Regenerated.
	* aarch64-opc-2.c: Regenerated.

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-tbl.h (aarch64_opcode_table): Add subp, subps and cmpp.
	* aarch64-asm-2.c: Regenerated.
	* aarch64-dis-2.c: Regenerated.
	* aarch64-opc-2.c: Regenerated.

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
	(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
	* aarch64-opc.c (fields): Add entry for imm4_3.
	(operand_general_constraint_met_p): Add cases for
	AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
	(aarch64_print_operand): Likewise.
	* aarch64-tbl.h (QL_ADDG): New.
	(aarch64_opcode_table): Add addg, subg, irg and gmi.
	(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
	* aarch64-asm.c (aarch64_ins_imm): Add case for
	operand_need_shift_by_four.
	* aarch64-asm-2.c: Regenerated.
	* aarch64-dis-2.c: Regenerated.
	* aarch64-opc-2.c: Regenerated.

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-tbl.h (aarch64_feature_memtag): New.
	(MEMTAG, MEMTAG_INSN): New.

2018-11-06  Sudakshina Das  <sudi.das@arm.com>

	* arm-dis.c (select_arm_features): Update bfd_mach_arm_8
	with Armv8.5-A. Remove reduntant ARM_EXT2_FP16_FML.

2018-11-06  Alan Modra  <amodra@gmail.com>

	* ppc-opc.c (insert_arx, insert_ary, insert_rx, insert_ry, insert_ls),
	(insert_evuimm1_ex0, insert_evuimm2_ex0, insert_evuimm4_ex0),
	(insert_evuimm8_ex0, insert_evuimm_lt8, insert_evuimm_lt16),
	(insert_rD_rS_even, insert_off_lsp, insert_off_spe2, insert_Ddd):
	Don't return zero on error, insert mask bits instead.
	(insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w): Delete.
	(insert_sh6, extract_sh6): Delete dead code.
	(insert_sprbat, insert_sprg): Use unsigned comparisions.
	(powerpc_operands <OIMM>): Set shift count rather than using
	PPC_OPSHIFT_INV.
	<SE_SDH, SE_SDW>: Likewise.  Don't use insert/extract functions.

2018-11-06  Jan Beulich  <jbeulich@suse.com>

	* i386-dis-evex.h (evex_table): Use K suffix instead of %LW for
	vpbroadcast{d,q} with GPR operand.

2018-11-06  Jan Beulich  <jbeulich@suse.com>

	* i386-dis.c (EVEX_W_0F6E_P_2, EVEX_W_0F7E_P_2): Delete.
	* i386-dis-evex.h (evex_table): Move vmov[dq} with GPR operand
	cases up one level in the hierarchy.

2018-11-06  Jan Beulich  <jbeulich@suse.com>

	* i386-dis.c (MOD_VEX_W_0_0F92_P_3_LEN_0,
	MOD_VEX_W_1_0F92_P_3_LEN_0): Fold into MOD_VEX_0F92_P_3_LEN_0.
	(MOD_VEX_W_0_0F93_P_3_LEN_0, MOD_VEX_W_1_0F93_P_3_LEN_0): Fold
	into MOD_VEX_0F93_P_3_LEN_0.
	(vex_len_table, vex_w_table, mod_table): Move kmov[dq} with GPR
	operand cases up one level in the hierarchy.

2018-11-06  Jan Beulich  <jbeulich@suse.com>

	* i386-dis.c (VEX_W_0FC4_P_2, VEX_W_0FC5_P_2, VEX_W_0F3A14_P_2,
	VEX_W_0F3A15_P_2, VEX_W_0F3A20_P_2, EVEX_W_0F3A16_P_2,
	EVEX_W_0F3A22_P_2): Delete.
	(vex_len_table, vex_w_table): Move vpextr{b,w} and vpinsr{b,w}
	entries up one level in the hierarchy.
	(OP_E_memory): Handle dq_mode when determining Disp8 shift
	value.
	* i386-dis-evex.h (evex_table): Move vpextr{d,q} and vpinsr{d,q}
	entries up one level in the hierarchy.
	* i386-opc.tbl (vpextrb, vpextrw, vpinsrb, vpinsrw): Change to
	VexWIG for AVX flavors.
	* i386-tbl.h: Re-generate.

2018-11-06  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vcvtsi2sd, vcvtsi2ss, vmovd, vpcmpestri,
	vpcmpestrm, vpextrd, vpinsrd, vpbroadcastd, vcvtusi2sd,
	vcvtusi2ss, kmovd): Drop VexW=1.
	* i386-tbl.h: Re-generate.

2018-11-06  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (Vex128, Vex256, VexLIG, EVex128, EVex256,
	EVex512, EVexLIG, EVexDYN): New.
	(ldmxcsr, stmxcsr, vldmxcsr, vstmxcsr, all BMI, BMI2, and TBM
	insns): Use Vex128 instead of Vex=3 (aka VexLIG).
	(vextractps, vinsertps, vpextr*, vpinsr*): Use EVex128 instead
	of EVex=4 (aka EVexLIG).
	* i386-tbl.h: Re-generate.

2018-11-06  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (pextrw, vpextrw): Add Load to 0F C5 forms.
	(vpmaxub): Re-order attributes on AVX512BW flavor.
	* i386-tbl.h: Re-generate.

2018-11-06  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vandnp*, vandp*, vcmp*, vcvtss2sd, vorp*,
	vpmaxub, vmovntdqa, vmpsadbw, vphsub*): Use VexWIG instead of
	Vex=1 on AVX / AVX2 flavors.
	(vpmaxub): Re-order attributes on AVX512BW flavor.
	* i386-tbl.h: Re-generate.

2018-11-06  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (VexW0, VexW1): New.
	(vphadd*, vphsub*): Use VexW0 on XOP variants.
	* i386-tbl.h: Re-generate.

2018-10-22  John Darrington  <john@darrington.wattle.id.au>

	* s12z-dis.c (decode_possible_symbol): Add fallback case.
	(rel_15_7): Likewise.

2018-10-19  Tamar Christina  <tamar.christina@arm.com>

	* arm-dis.c (UNKNOWN_INSTRUCTION_32BIT): Format specifier for arm mode.
	(UNKNOWN_INSTRUCTION_16BIT): Format specifier for thumb mode.
	(print_insn_arm, print_insn_thumb16, print_insn_thumb32): Use them.

2018-10-16  Matthew Malcomson  <matthew.malcomson@arm.com>

	* aarch64-opc.c (struct operand_qualifier_data): Change qualifier data
	corresponding to AARCH64_OPND_QLF_S_4B qualifier.

2018-10-10  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (opcode_modifiers): Drop Size16, Size32, and
	Size64. Add Size.
	* i386-opc.h (Size16, Size32, Size64): Delete.
	(Size): New.
	(SIZE16, SIZE32, SIZE64): Define.
	(struct i386_opcode_modifier): Drop size16, size32, and size64.
	Add size.
	* i386-opc.tbl (Size16, Size32, Size64): Define.
	* i386-tbl.h: Re-generate.

2018-10-09  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-opc.c (operand_general_constraint_met_p): Add
	SSBS in the check for one-bit immediate.
	(aarch64_sys_regs): New entry for SSBS.
	(aarch64_sys_reg_supported_p): New check for above.
	(aarch64_pstatefields): New entry for SSBS.
	(aarch64_pstatefield_supported_p): New check for above.

2018-10-09  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-opc.c (aarch64_sys_regs): New entries for
	scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
	(aarch64_sys_reg_supported_p): New checks for above.

2018-10-09  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New.
	(HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag
	with the hint immediate.
	* aarch64-opc.c (aarch64_hint_options): New entries for
	c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI.
	(aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET
	while checking for HINT_OPD_F_NOPRINT flag.
	* aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to
	extract value.
	* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New.
	(aarch64_opcode_table): Add entry for BTI.
	(AARCH64_OPERANDS): Add new description for BTI targets.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2018-10-09  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-opc.c (aarch64_sys_regs): New entries for
	rndr and rndrrs.
	(aarch64_sys_reg_supported_p): New check for above.

2018-10-09  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-opc.c (aarch64_sys_regs_dc): New entry for cvadp.
	(aarch64_sys_ins_reg_supported_p): New check for above.

2018-10-09  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-dis.c (aarch64_ext_sysins_op): Add case for
	AARCH64_OPND_SYSREG_SR.
	* aarch64-opc.c (aarch64_print_operand): Likewise.
	(aarch64_sys_regs_sr): Define table.
	(aarch64_sys_ins_reg_supported_p): Check for RCTX with
	AARCH64_FEATURE_PREDRES.
	* aarch64-tbl.h (aarch64_feature_predres): New.
	(PREDRES, PREDRES_INSN): New.
	(aarch64_opcode_table): Add entries for cfp, dvp and cpp.
	(AARCH64_OPERANDS): Add new description for SYSREG_SR.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2018-10-09  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-tbl.h (aarch64_feature_sb): New.
	(SB, SB_INSN): New.
	(aarch64_opcode_table): Add entry for sb.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2018-10-09  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-tbl.h (aarch64_feature_flagmanip): New.
	(aarch64_feature_frintts): New.
	(FLAGMANIP, FRINTTS): New.
	(aarch64_opcode_table): Add entries for xaflag, axflag
	and frint[32,64][x,z] instructions.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2018-10-09  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New.
	(ARMV8_5, V8_5_INSN): New.

2018-10-08  Tamar Christina  <tamar.christina@arm.com>

	* aarch64-opc.c (verify_constraints): Use memset instead of {0}.

2018-10-05  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (rm_table): Add enclv.
	* i386-opc.tbl: Add enclv.
	* i386-tbl.h: Regenerated.

2018-10-05  Sudakshina Das  <sudi.das@arm.com>

	* arm-dis.c (arm_opcodes): Add sb.
	(thumb32_opcodes): Likewise.

2018-10-05  Richard Henderson  <rth@twiddle.net>
	    Stafford Horne  <shorne@gmail.com>

	* or1k-desc.c: Regenerate.
	* or1k-desc.h: Regenerate.
	* or1k-opc.c: Regenerate.
	* or1k-opc.h: Regenerate.
	* or1k-opinst.c: Regenerate.

2018-10-05  Richard Henderson  <rth@twiddle.net>

	* or1k-asm.c: Regenerated.
	* or1k-desc.c: Regenerated.
	* or1k-desc.h: Regenerated.
	* or1k-dis.c: Regenerated.
	* or1k-ibld.c: Regenerated.
	* or1k-opc.c: Regenerated.
	* or1k-opc.h: Regenerated.
	* or1k-opinst.c: Regenerated.

2018-10-05  Richard Henderson  <rth@twiddle.net>

	* or1k-asm.c: Regenerate.

2018-10-03  Tamar Christina  <tamar.christina@arm.com>

	* aarch64-asm.c (aarch64_opcode_encode): Apply constraint verifier.
	* aarch64-dis.c (print_operands): Refactor to take notes.
	(print_verifier_notes): New.
	(print_aarch64_insn): Apply constraint verifier.
	(print_insn_aarch64_word): Update call to print_aarch64_insn.
	* aarch64-opc.c (aarch64_print_operand): Remove attribute, update notes format.

2018-10-03  Tamar Christina  <tamar.christina@arm.com>

	* aarch64-opc.c (init_insn_block): New.
	(verify_constraints, aarch64_is_destructive_by_operands): New.
	* aarch64-opc.h (verify_constraints): New.

2018-10-03  Tamar Christina  <tamar.christina@arm.com>

	* aarch64-dis.c (aarch64_opcode_decode): Update verifier call.
	* aarch64-opc.c (verify_ldpsw): Update arguments.

2018-10-03  Tamar Christina  <tamar.christina@arm.com>

	* aarch64-dis.c (ERR_OK, ERR_UND, ERR_UNP, ERR_NYI): Remove.
	(aarch64_decode_insn, print_insn_aarch64_word): Use err_type.

2018-10-03  Tamar Christina  <tamar.christina@arm.com>

	* aarch64-asm.c (aarch64_opcode_encode): Add insn_sequence.
	* aarch64-dis.c (insn_sequence): New.

2018-10-03  Tamar Christina  <tamar.christina@arm.com>

	* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN, _CRC_INSN,
	_LSE_INSN, _LOR_INSN, RDMA_INSN, FF16_INSN, SF16_INSN, V8_2_INSN,
	_SVE_INSN, V8_3_INSN, CNUM_INSN, RCPC_INSN, SHA2_INSN, AES_INSN,
	V8_4_INSN, SHA3_INSN, SM4_INSN, FP16_V8_2_INSN, DOT_INSN): Initialize
	constraints.
	(_SVE_INSNC): New.
	(struct aarch64_opcode): (fjcvtzs, ldpsw, ldpsw, esb, psb): Initialize
	constraints.
	(movprfx): Change _SVE_INSN into _SVE_INSNC, add C_SCAN_MOVPRFX and
	F_SCAN flags.
	(msb, mul, neg, not, orr, rbit, revb, revh, revw, sabd, scvtf,
	sdiv, sdivr, sdot, smax, smin, smulh, splice, sqadd, sqdecd, sqdech,
	sqdecp, sqdecw, sqincd, sqinch, sqincp, sqincw, sqsub, sub, subr, sxtb,
	sxth, sxtw, uabd, ucvtf, udiv, udivr, udot, umax, umin, umulh, uqadd,
	uqdecd, uqdech, uqdecp, uqdecw, uqincd, uqinch, uqincp, uqincw, uqsub,
	uxtb, uxth, uxtw, bic, eon, orn, mov, fmov): Change _SVE_INSN into _SVE_INSNC and add
	C_SCAN_MOVPRFX and C_MAX_ELEM constraints.

2018-10-02  Palmer Dabbelt  <palmer@sifive.com>

	* riscv-opc.c (riscv_opcodes) <fence.tso>: New opcode.

2018-09-23  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-dis.c (nios2_print_insn_arg): Make sure signed conversions
	are used when extracting signed fields and converting them to
	potentially 64-bit types.

2018-09-21  Simon Marchi  <simon.marchi@ericsson.com>

	* Makefile.am: Remove NO_WMISSING_FIELD_INITIALIZERS.
	* Makefile.in: Re-generate.
	* aclocal.m4: Re-generate.
	* configure: Re-generate.
	* configure.ac: Remove check for -Wno-missing-field-initializers.
	* csky-opc.h (csky_v1_opcodes): Initialize all fields of last element.
	(csky_v2_opcodes): Likewise.

2018-09-20  Maciej W. Rozycki  <macro@linux-mips.org>

	* arc-nps400-tbl.h: Append `ull' to large constants throughout.

2018-09-20  Nelson Chu <nelson.chu1990@gmail.com>

	* nds32-asm.c (operand_fields): Remove the unused fields.
	(nds32_opcodes): Remove the unused instructions.
	* nds32-dis.c (nds32_ex9_info): Removed.
	(nds32_parse_opcode): Updated.
	(print_insn_nds32): Likewise.
	* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
	(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
	(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
	build_opcode_hash_table): New functions.
	(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
	nds32_opcode_table): New.
	(hw_ktabs): Declare it to a pointer rather than an array.
	(build_hash_table): Removed.
	* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
	SYN_ROPT and upadte HW_GPR and HW_INT.
	* nds32-dis.c (keywords): Remove const.
	(match_field): New function.
	(nds32_parse_opcode): Updated.
	* disassemble.c (disassemble_init_for_target):
	Add disassemble_init_nds32.
	* nds32-dis.c (eum map_type): New.
	(nds32_private_data): Likewise.
	(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
	nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
	(print_insn_nds32): Updated.
	* nds32-asm.c (parse_aext_reg): Add new parameter.
	(parse_re, parse_re2, parse_aext_reg): Only reduced registers
	are allowed to use.
	All callers changed.
	* nds32-asm.c (keyword_usr, keyword_sr): Updated.
	(operand_fields): Add new fields.
	(nds32_opcodes): Add new instructions.
	(keyword_aridxi_mx): New keyword.
	* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
	and NASM_ATTR_ZOL.
	(ALU2_1, ALU2_2, ALU2_3): New macros.
	* nds32-dis.c (nds32_filter_unknown_insn): Updated.

2018-09-17  Kito Cheng  <kito@andestech.com>

	* riscv-opc.c (riscv_opcodes): Adjust the order of ble and bleu.

2018-09-17  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/23670
	* i386-dis-evex.h (evex_table): Use EVEX_LEN_0F6E_P_2,
	EVEX_LEN_0F7E_P_1, EVEX_LEN_0F7E_P_2 and EVEX_LEN_0FD6_P_2.
	(EVEX_LEN_0F6E_P_2): New EVEX_LEN_TABLE entry.
	(EVEX_LEN_0F7E_P_1): Likewise.
	(EVEX_LEN_0F7E_P_2): Likewise.
	(EVEX_LEN_0FD6_P_2): Likewise.
	* i386-dis.c (USE_EVEX_LEN_TABLE): New.
	(EVEX_LEN_TABLE): Likewise.
	(EVEX_LEN_0F6E_P_2): New enum.
	(EVEX_LEN_0F7E_P_1): Likewise.
	(EVEX_LEN_0F7E_P_2): Likewise.
	(EVEX_LEN_0FD6_P_2): Likewise.
	(evex_len_table): New.
	(get_valid_dis386): Handle USE_EVEX_LEN_TABLE.
	* i386-opc.tbl: Set EVex=2 on EVEX.128 only vmovd and vmovq.
	* i386-tbl.h: Regenerated.

2018-09-17  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/23665
	* i386-dis.c (vex_len_table): Update VEX_LEN_0F6E_P_2 and
	VEX_LEN_0F7E_P_2 entries.
	* i386-opc.tbl: Set Vex=1 on VEX.128 only vmovd and vmovq.
	* i386-tbl.h: Regenerated.

2018-09-17  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (VZERO_Fixup): Removed.
	(VZERO): Likewise.
	(VEX_LEN_0F10_P_1): Likewise.
	(VEX_LEN_0F10_P_3): Likewise.
	(VEX_LEN_0F11_P_1): Likewise.
	(VEX_LEN_0F11_P_3): Likewise.
	(VEX_LEN_0F2E_P_0): Likewise.
	(VEX_LEN_0F2E_P_2): Likewise.
	(VEX_LEN_0F2F_P_0): Likewise.
	(VEX_LEN_0F2F_P_2): Likewise.
	(VEX_LEN_0F51_P_1): Likewise.
	(VEX_LEN_0F51_P_3): Likewise.
	(VEX_LEN_0F52_P_1): Likewise.
	(VEX_LEN_0F53_P_1): Likewise.
	(VEX_LEN_0F58_P_1): Likewise.
	(VEX_LEN_0F58_P_3): Likewise.
	(VEX_LEN_0F59_P_1): Likewise.
	(VEX_LEN_0F59_P_3): Likewise.
	(VEX_LEN_0F5A_P_1): Likewise.
	(VEX_LEN_0F5A_P_3): Likewise.
	(VEX_LEN_0F5C_P_1): Likewise.
	(VEX_LEN_0F5C_P_3): Likewise.
	(VEX_LEN_0F5D_P_1): Likewise.
	(VEX_LEN_0F5D_P_3): Likewise.
	(VEX_LEN_0F5E_P_1): Likewise.
	(VEX_LEN_0F5E_P_3): Likewise.
	(VEX_LEN_0F5F_P_1): Likewise.
	(VEX_LEN_0F5F_P_3): Likewise.
	(VEX_LEN_0FC2_P_1): Likewise.
	(VEX_LEN_0FC2_P_3): Likewise.
	(VEX_LEN_0F3A0A_P_2): Likewise.
	(VEX_LEN_0F3A0B_P_2): Likewise.
	(VEX_W_0F10_P_0): Likewise.
	(VEX_W_0F10_P_1): Likewise.
	(VEX_W_0F10_P_2): Likewise.
	(VEX_W_0F10_P_3): Likewise.
	(VEX_W_0F11_P_0): Likewise.
	(VEX_W_0F11_P_1): Likewise.
	(VEX_W_0F11_P_2): Likewise.
	(VEX_W_0F11_P_3): Likewise.
	(VEX_W_0F12_P_0_M_0): Likewise.
	(VEX_W_0F12_P_0_M_1): Likewise.
	(VEX_W_0F12_P_1): Likewise.
	(VEX_W_0F12_P_2): Likewise.
	(VEX_W_0F12_P_3): Likewise.
	(VEX_W_0F13_M_0): Likewise.
	(VEX_W_0F14): Likewise.
	(VEX_W_0F15): Likewise.
	(VEX_W_0F16_P_0_M_0): Likewise.
	(VEX_W_0F16_P_0_M_1): Likewise.
	(VEX_W_0F16_P_1): Likewise.
	(VEX_W_0F16_P_2): Likewise.
	(VEX_W_0F17_M_0): Likewise.
	(VEX_W_0F28): Likewise.
	(VEX_W_0F29): Likewise.
	(VEX_W_0F2B_M_0): Likewise.
	(VEX_W_0F2E_P_0): Likewise.
	(VEX_W_0F2E_P_2): Likewise.
	(VEX_W_0F2F_P_0): Likewise.
	(VEX_W_0F2F_P_2): Likewise.
	(VEX_W_0F50_M_0): Likewise.
	(VEX_W_0F51_P_0): Likewise.
	(VEX_W_0F51_P_1): Likewise.
	(VEX_W_0F51_P_2): Likewise.
	(VEX_W_0F51_P_3): Likewise.
	(VEX_W_0F52_P_0): Likewise.
	(VEX_W_0F52_P_1): Likewise.
	(VEX_W_0F53_P_0): Likewise.
	(VEX_W_0F53_P_1): Likewise.
	(VEX_W_0F58_P_0): Likewise.
	(VEX_W_0F58_P_1): Likewise.
	(VEX_W_0F58_P_2): Likewise.
	(VEX_W_0F58_P_3): Likewise.
	(VEX_W_0F59_P_0): Likewise.
	(VEX_W_0F59_P_1): Likewise.
	(VEX_W_0F59_P_2): Likewise.
	(VEX_W_0F59_P_3): Likewise.
	(VEX_W_0F5A_P_0): Likewise.
	(VEX_W_0F5A_P_1): Likewise.
	(VEX_W_0F5A_P_3): Likewise.
	(VEX_W_0F5B_P_0): Likewise.
	(VEX_W_0F5B_P_1): Likewise.
	(VEX_W_0F5B_P_2): Likewise.
	(VEX_W_0F5C_P_0): Likewise.
	(VEX_W_0F5C_P_1): Likewise.
	(VEX_W_0F5C_P_2): Likewise.
	(VEX_W_0F5C_P_3): Likewise.
	(VEX_W_0F5D_P_0): Likewise.
	(VEX_W_0F5D_P_1): Likewise.
	(VEX_W_0F5D_P_2): Likewise.
	(VEX_W_0F5D_P_3): Likewise.
	(VEX_W_0F5E_P_0): Likewise.
	(VEX_W_0F5E_P_1): Likewise.
	(VEX_W_0F5E_P_2): Likewise.
	(VEX_W_0F5E_P_3): Likewise.
	(VEX_W_0F5F_P_0): Likewise.
	(VEX_W_0F5F_P_1): Likewise.
	(VEX_W_0F5F_P_2): Likewise.
	(VEX_W_0F5F_P_3): Likewise.
	(VEX_W_0F60_P_2): Likewise.
	(VEX_W_0F61_P_2): Likewise.
	(VEX_W_0F62_P_2): Likewise.
	(VEX_W_0F63_P_2): Likewise.
	(VEX_W_0F64_P_2): Likewise.
	(VEX_W_0F65_P_2): Likewise.
	(VEX_W_0F66_P_2): Likewise.
	(VEX_W_0F67_P_2): Likewise.
	(VEX_W_0F68_P_2): Likewise.
	(VEX_W_0F69_P_2): Likewise.
	(VEX_W_0F6A_P_2): Likewise.
	(VEX_W_0F6B_P_2): Likewise.
	(VEX_W_0F6C_P_2): Likewise.
	(VEX_W_0F6D_P_2): Likewise.
	(VEX_W_0F6F_P_1): Likewise.
	(VEX_W_0F6F_P_2): Likewise.
	(VEX_W_0F70_P_1): Likewise.
	(VEX_W_0F70_P_2): Likewise.
	(VEX_W_0F70_P_3): Likewise.
	(VEX_W_0F71_R_2_P_2): Likewise.
	(VEX_W_0F71_R_4_P_2): Likewise.
	(VEX_W_0F71_R_6_P_2): Likewise.
	(VEX_W_0F72_R_2_P_2): Likewise.
	(VEX_W_0F72_R_4_P_2): Likewise.
	(VEX_W_0F72_R_6_P_2): Likewise.
	(VEX_W_0F73_R_2_P_2): Likewise.
	(VEX_W_0F73_R_3_P_2): Likewise.
	(VEX_W_0F73_R_6_P_2): Likewise.
	(VEX_W_0F73_R_7_P_2): Likewise.
	(VEX_W_0F74_P_2): Likewise.
	(VEX_W_0F75_P_2): Likewise.
	(VEX_W_0F76_P_2): Likewise.
	(VEX_W_0F77_P_0): Likewise.
	(VEX_W_0F7C_P_2): Likewise.
	(VEX_W_0F7C_P_3): Likewise.
	(VEX_W_0F7D_P_2): Likewise.
	(VEX_W_0F7D_P_3): Likewise.
	(VEX_W_0F7E_P_1): Likewise.
	(VEX_W_0F7F_P_1): Likewise.
	(VEX_W_0F7F_P_2): Likewise.
	(VEX_W_0FAE_R_2_M_0): Likewise.
	(VEX_W_0FAE_R_3_M_0): Likewise.
	(VEX_W_0FC2_P_0): Likewise.
	(VEX_W_0FC2_P_1): Likewise.
	(VEX_W_0FC2_P_2): Likewise.
	(VEX_W_0FC2_P_3): Likewise.
	(VEX_W_0FD0_P_2): Likewise.
	(VEX_W_0FD0_P_3): Likewise.
	(VEX_W_0FD1_P_2): Likewise.
	(VEX_W_0FD2_P_2): Likewise.
	(VEX_W_0FD3_P_2): Likewise.
	(VEX_W_0FD4_P_2): Likewise.
	(VEX_W_0FD5_P_2): Likewise.
	(VEX_W_0FD6_P_2): Likewise.
	(VEX_W_0FD7_P_2_M_1): Likewise.
	(VEX_W_0FD8_P_2): Likewise.
	(VEX_W_0FD9_P_2): Likewise.
	(VEX_W_0FDA_P_2): Likewise.
	(VEX_W_0FDB_P_2): Likewise.
	(VEX_W_0FDC_P_2): Likewise.
	(VEX_W_0FDD_P_2): Likewise.
	(VEX_W_0FDE_P_2): Likewise.
	(VEX_W_0FDF_P_2): Likewise.
	(VEX_W_0FE0_P_2): Likewise.
	(VEX_W_0FE1_P_2): Likewise.
	(VEX_W_0FE2_P_2): Likewise.
	(VEX_W_0FE3_P_2): Likewise.
	(VEX_W_0FE4_P_2): Likewise.
	(VEX_W_0FE5_P_2): Likewise.
	(VEX_W_0FE6_P_1): Likewise.
	(VEX_W_0FE6_P_2): Likewise.
	(VEX_W_0FE6_P_3): Likewise.
	(VEX_W_0FE7_P_2_M_0): Likewise.
	(VEX_W_0FE8_P_2): Likewise.
	(VEX_W_0FE9_P_2): Likewise.
	(VEX_W_0FEA_P_2): Likewise.
	(VEX_W_0FEB_P_2): Likewise.
	(VEX_W_0FEC_P_2): Likewise.
	(VEX_W_0FED_P_2): Likewise.
	(VEX_W_0FEE_P_2): Likewise.
	(VEX_W_0FEF_P_2): Likewise.
	(VEX_W_0FF0_P_3_M_0): Likewise.
	(VEX_W_0FF1_P_2): Likewise.
	(VEX_W_0FF2_P_2): Likewise.
	(VEX_W_0FF3_P_2): Likewise.
	(VEX_W_0FF4_P_2): Likewise.
	(VEX_W_0FF5_P_2): Likewise.
	(VEX_W_0FF6_P_2): Likewise.
	(VEX_W_0FF7_P_2): Likewise.
	(VEX_W_0FF8_P_2): Likewise.
	(VEX_W_0FF9_P_2): Likewise.
	(VEX_W_0FFA_P_2): Likewise.
	(VEX_W_0FFB_P_2): Likewise.
	(VEX_W_0FFC_P_2): Likewise.
	(VEX_W_0FFD_P_2): Likewise.
	(VEX_W_0FFE_P_2): Likewise.
	(VEX_W_0F3800_P_2): Likewise.
	(VEX_W_0F3801_P_2): Likewise.
	(VEX_W_0F3802_P_2): Likewise.
	(VEX_W_0F3803_P_2): Likewise.
	(VEX_W_0F3804_P_2): Likewise.
	(VEX_W_0F3805_P_2): Likewise.
	(VEX_W_0F3806_P_2): Likewise.
	(VEX_W_0F3807_P_2): Likewise.
	(VEX_W_0F3808_P_2): Likewise.
	(VEX_W_0F3809_P_2): Likewise.
	(VEX_W_0F380A_P_2): Likewise.
	(VEX_W_0F380B_P_2): Likewise.
	(VEX_W_0F3817_P_2): Likewise.
	(VEX_W_0F381C_P_2): Likewise.
	(VEX_W_0F381D_P_2): Likewise.
	(VEX_W_0F381E_P_2): Likewise.
	(VEX_W_0F3820_P_2): Likewise.
	(VEX_W_0F3821_P_2): Likewise.
	(VEX_W_0F3822_P_2): Likewise.
	(VEX_W_0F3823_P_2): Likewise.
	(VEX_W_0F3824_P_2): Likewise.
	(VEX_W_0F3825_P_2): Likewise.
	(VEX_W_0F3828_P_2): Likewise.
	(VEX_W_0F3829_P_2): Likewise.
	(VEX_W_0F382A_P_2_M_0): Likewise.
	(VEX_W_0F382B_P_2): Likewise.
	(VEX_W_0F3830_P_2): Likewise.
	(VEX_W_0F3831_P_2): Likewise.
	(VEX_W_0F3832_P_2): Likewise.
	(VEX_W_0F3833_P_2): Likewise.
	(VEX_W_0F3834_P_2): Likewise.
	(VEX_W_0F3835_P_2): Likewise.
	(VEX_W_0F3837_P_2): Likewise.
	(VEX_W_0F3838_P_2): Likewise.
	(VEX_W_0F3839_P_2): Likewise.
	(VEX_W_0F383A_P_2): Likewise.
	(VEX_W_0F383B_P_2): Likewise.
	(VEX_W_0F383C_P_2): Likewise.
	(VEX_W_0F383D_P_2): Likewise.
	(VEX_W_0F383E_P_2): Likewise.
	(VEX_W_0F383F_P_2): Likewise.
	(VEX_W_0F3840_P_2): Likewise.
	(VEX_W_0F3841_P_2): Likewise.
	(VEX_W_0F38DB_P_2): Likewise.
	(VEX_W_0F3A08_P_2): Likewise.
	(VEX_W_0F3A09_P_2): Likewise.
	(VEX_W_0F3A0A_P_2): Likewise.
	(VEX_W_0F3A0B_P_2): Likewise.
	(VEX_W_0F3A0C_P_2): Likewise.
	(VEX_W_0F3A0D_P_2): Likewise.
	(VEX_W_0F3A0E_P_2): Likewise.
	(VEX_W_0F3A0F_P_2): Likewise.
	(VEX_W_0F3A21_P_2): Likewise.
	(VEX_W_0F3A40_P_2): Likewise.
	(VEX_W_0F3A41_P_2): Likewise.
	(VEX_W_0F3A42_P_2): Likewise.
	(VEX_W_0F3A62_P_2): Likewise.
	(VEX_W_0F3A63_P_2): Likewise.
	(VEX_W_0F3ADF_P_2): Likewise.
	(VEX_LEN_0F77_P_0): New.
	(prefix_table): Update PREFIX_VEX_0F10, PREFIX_VEX_0F11,
	PREFIX_VEX_0F12, PREFIX_VEX_0F16, PREFIX_VEX_0F2E,
	PREFIX_VEX_0F2F, PREFIX_VEX_0F51, PREFIX_VEX_0F52,
	PREFIX_VEX_0F53, PREFIX_VEX_0F58, PREFIX_VEX_0F59,
	PREFIX_VEX_0F5A, PREFIX_VEX_0F5B, PREFIX_VEX_0F5C,
	PREFIX_VEX_0F5D, PREFIX_VEX_0F5E, PREFIX_VEX_0F5F,
	PREFIX_VEX_0F60, PREFIX_VEX_0F61, PREFIX_VEX_0F62,
	PREFIX_VEX_0F63, PREFIX_VEX_0F64, PREFIX_VEX_0F65,
	PREFIX_VEX_0F66, PREFIX_VEX_0F67, PREFIX_VEX_0F68,
	PREFIX_VEX_0F69, PREFIX_VEX_0F6A, PREFIX_VEX_0F6B,
	PREFIX_VEX_0F6C, PREFIX_VEX_0F6D, PREFIX_VEX_0F6F,
	PREFIX_VEX_0F70, PREFIX_VEX_0F71_REG_2, PREFIX_VEX_0F71_REG_4,
	PREFIX_VEX_0F71_REG_6, PREFIX_VEX_0F72_REG_4,
	PREFIX_VEX_0F72_REG_6, PREFIX_VEX_0F73_REG_2,
	PREFIX_VEX_0F73_REG_3, PREFIX_VEX_0F73_REG_6,
	PREFIX_VEX_0F73_REG_7, PREFIX_VEX_0F74, PREFIX_VEX_0F75,
	PREFIX_VEX_0F76, PREFIX_VEX_0F77, PREFIX_VEX_0F7C,
	PREFIX_VEX_0F7D, PREFIX_VEX_0F7F, PREFIX_VEX_0FC2,
	PREFIX_VEX_0FD0, PREFIX_VEX_0FD1, PREFIX_VEX_0FD2,
	PREFIX_VEX_0FD3, PREFIX_VEX_0FD4, PREFIX_VEX_0FD5,
	PREFIX_VEX_0FD8, PREFIX_VEX_0FD9, PREFIX_VEX_0FDA,
	PREFIX_VEX_0FDC, PREFIX_VEX_0FDD, PREFIX_VEX_0FDE,
	PREFIX_VEX_0FDF, PREFIX_VEX_0FE0, PREFIX_VEX_0FE1,
	PREFIX_VEX_0FE2, PREFIX_VEX_0FE3, PREFIX_VEX_0FE4,
	PREFIX_VEX_0FE5, PREFIX_VEX_0FE6, PREFIX_VEX_0FE8,
	PREFIX_VEX_0FE9, PREFIX_VEX_0FEA, PREFIX_VEX_0FEB,
	PREFIX_VEX_0FEC, PREFIX_VEX_0FED, PREFIX_VEX_0FEE,
	PREFIX_VEX_0FEF, PREFIX_VEX_0FF1. PREFIX_VEX_0FF2,
	PREFIX_VEX_0FF3, PREFIX_VEX_0FF4, PREFIX_VEX_0FF5,
	PREFIX_VEX_0FF6, PREFIX_VEX_0FF8, PREFIX_VEX_0FF9,
	PREFIX_VEX_0FFA, PREFIX_VEX_0FFB, PREFIX_VEX_0FFC,
	PREFIX_VEX_0FFD, PREFIX_VEX_0FFE, PREFIX_VEX_0F3800,
	PREFIX_VEX_0F3801, PREFIX_VEX_0F3802, PREFIX_VEX_0F3803,
	PREFIX_VEX_0F3804, PREFIX_VEX_0F3805, PREFIX_VEX_0F3806,
	PREFIX_VEX_0F3807, PREFIX_VEX_0F3808, PREFIX_VEX_0F3809,
	PREFIX_VEX_0F380A, PREFIX_VEX_0F380B, PREFIX_VEX_0F3817,
	PREFIX_VEX_0F381C, PREFIX_VEX_0F381D, PREFIX_VEX_0F381E,
	PREFIX_VEX_0F3820, PREFIX_VEX_0F3821, PREFIX_VEX_0F3822,
	PREFIX_VEX_0F3823, PREFIX_VEX_0F3824, PREFIX_VEX_0F3825,
	PREFIX_VEX_0F3828, PREFIX_VEX_0F3829, PREFIX_VEX_0F382B,
	PREFIX_VEX_0F382C, PREFIX_VEX_0F3831, PREFIX_VEX_0F3832,
	PREFIX_VEX_0F3833, PREFIX_VEX_0F3834, PREFIX_VEX_0F3835,
	PREFIX_VEX_0F3837, PREFIX_VEX_0F3838, PREFIX_VEX_0F3839,
	PREFIX_VEX_0F383A, PREFIX_VEX_0F383B, PREFIX_VEX_0F383C,
	PREFIX_VEX_0F383D, PREFIX_VEX_0F383E, PREFIX_VEX_0F383F,
	PREFIX_VEX_0F3840, PREFIX_VEX_0F3A08, PREFIX_VEX_0F3A09,
	PREFIX_VEX_0F3A0A, PREFIX_VEX_0F3A0B, PREFIX_VEX_0F3A0C,
	PREFIX_VEX_0F3A0D, PREFIX_VEX_0F3A0E, PREFIX_VEX_0F3A0F,
	PREFIX_VEX_0F3A40 and PREFIX_VEX_0F3A42 entries.
	(vex_table): Update VEX 0F28 and 0F29 entries.
	(vex_len_table): Update VEX_LEN_0F10_P_1, VEX_LEN_0F10_P_3,
	VEX_LEN_0F11_P_1, VEX_LEN_0F11_P_3, VEX_LEN_0F2E_P_0,
	VEX_LEN_0F2E_P_2, VEX_LEN_0F2F_P_0, VEX_LEN_0F2F_P_2,
	VEX_LEN_0F51_P_1, VEX_LEN_0F51_P_3, VEX_LEN_0F52_P_1,
	VEX_LEN_0F53_P_1, VEX_LEN_0F58_P_1, VEX_LEN_0F58_P_3,
	VEX_LEN_0F59_P_1, VEX_LEN_0F59_P_3, VEX_LEN_0F5A_P_1,
	VEX_LEN_0F5A_P_3, VEX_LEN_0F5C_P_1, VEX_LEN_0F5C_P_3,
	VEX_LEN_0F5D_P_1, VEX_LEN_0F5D_P_3, VEX_LEN_0F5E_P_1,
	VEX_LEN_0F5E_P_3, VEX_LEN_0F5F_P_1, VEX_LEN_0F5F_P_3,
	VEX_LEN_0FC2_P_1, VEX_LEN_0FC2_P_3, VEX_LEN_0F3A0A_P_2 and
	VEX_LEN_0F3A0B_P_2 entries.
	(vex_w_table): Remove VEX_W_0F10_P_0, VEX_W_0F10_P_1,
	VEX_W_0F10_P_2, VEX_W_0F10_P_3, VEX_W_0F11_P_0, VEX_W_0F11_P_1,
	VEX_W_0F11_P_2, VEX_W_0F11_P_3, VEX_W_0F12_P_0_M_0,
	VEX_W_0F12_P_0_M_1, VEX_W_0F12_P_1, VEX_W_0F12_P_2,
	VEX_W_0F12_P_3, VEX_W_0F13_M_0, VEX_W_0F14, VEX_W_0F15,
	VEX_W_0F16_P_0_M_0, VEX_W_0F16_P_0_M_1, VEX_W_0F16_P_1,
	VEX_W_0F16_P_2, VEX_W_0F17_M_0, VEX_W_0F28, VEX_W_0F29,
	VEX_W_0F2B_M_0, VEX_W_0F2E_P_0, VEX_W_0F2E_P_2, VEX_W_0F2F_P_0,
	VEX_W_0F2F_P_2, VEX_W_0F50_M_0, VEX_W_0F51_P_0, VEX_W_0F51_P_1,
	VEX_W_0F51_P_2, VEX_W_0F51_P_3, VEX_W_0F52_P_0, VEX_W_0F52_P_1,
	VEX_W_0F53_P_0, VEX_W_0F53_P_1, VEX_W_0F58_P_0, VEX_W_0F58_P_1,
	VEX_W_0F58_P_2, VEX_W_0F58_P_3, VEX_W_0F59_P_0, VEX_W_0F59_P_1,
	VEX_W_0F59_P_2, VEX_W_0F59_P_3, VEX_W_0F5A_P_0, VEX_W_0F5A_P_1,
	VEX_W_0F5A_P_3, VEX_W_0F5B_P_0, VEX_W_0F5B_P_1, VEX_W_0F5B_P_2,
	VEX_W_0F5C_P_0, VEX_W_0F5C_P_1, VEX_W_0F5C_P_2, VEX_W_0F5C_P_3,
	VEX_W_0F5D_P_0, VEX_W_0F5D_P_1, VEX_W_0F5D_P_2, VEX_W_0F5D_P_3,
	VEX_W_0F5E_P_0, VEX_W_0F5E_P_1, VEX_W_0F5E_P_2, VEX_W_0F5E_P_3,
	VEX_W_0F5F_P_0, VEX_W_0F5F_P_1, VEX_W_0F5F_P_2, VEX_W_0F5F_P_3,
	VEX_W_0F60_P_2, VEX_W_0F61_P_2, VEX_W_0F62_P_2, VEX_W_0F63_P_2,
	VEX_W_0F64_P_2, VEX_W_0F65_P_2, VEX_W_0F66_P_2, VEX_W_0F67_P_2,
	VEX_W_0F68_P_2, VEX_W_0F69_P_2, VEX_W_0F6A_P_2, VEX_W_0F6B_P_2,
	VEX_W_0F6C_P_2, VEX_W_0F6D_P_2, VEX_W_0F6F_P_1, VEX_W_0F6F_P_2,
	VEX_W_0F70_P_1, VEX_W_0F70_P_2, VEX_W_0F70_P_3,
	VEX_W_0F71_R_2_P_2, VEX_W_0F71_R_4_P_2, VEX_W_0F71_R_6_P_2,
	VEX_W_0F72_R_2_P_2, VEX_W_0F72_R_4_P_2, VEX_W_0F72_R_6_P_2,
	VEX_W_0F73_R_2_P_2, VEX_W_0F73_R_3_P_2, VEX_W_0F73_R_6_P_2,
	VEX_W_0F73_R_7_P_2, VEX_W_0F74_P_2, VEX_W_0F75_P_2,
	VEX_W_0F76_P_2, VEX_W_0F77_P_0, VEX_W_0F7C_P_2, VEX_W_0F7C_P_3,
	VEX_W_0F7D_P_2, VEX_W_0F7D_P_3, VEX_W_0F7E_P_1, VEX_W_0F7F_P_1,
	VEX_W_0F7F_P_2, VEX_W_0FAE_R_2_M_0, VEX_W_0FAE_R_3_M_0,
	VEX_W_0FC2_P_0, VEX_W_0FC2_P_1, VEX_W_0FC2_P_2, VEX_W_0FC2_P_3,
	VEX_W_0FD0_P_2, VEX_W_0FD0_P_3, VEX_W_0FD1_P_2, VEX_W_0FD2_P_2,
	VEX_W_0FD3_P_2, VEX_W_0FD4_P_2, VEX_W_0FD5_P_2, VEX_W_0FD6_P_2,
	VEX_W_0FD7_P_2_M_1, VEX_W_0FD8_P_2, VEX_W_0FD9_P_2,
	VEX_W_0FDA_P_2, VEX_W_0FDB_P_2, VEX_W_0FDC_P_2, VEX_W_0FDD_P_2,
	VEX_W_0FDE_P_2, VEX_W_0FDF_P_2, VEX_W_0FE0_P_2, VEX_W_0FE1_P_2,
	VEX_W_0FE2_P_2, VEX_W_0FE3_P_2, VEX_W_0FE4_P_2, VEX_W_0FE5_P_2,
	VEX_W_0FE6_P_1, VEX_W_0FE6_P_2, VEX_W_0FE6_P_3,
	VEX_W_0FE7_P_2_M_0, VEX_W_0FE8_P_2, VEX_W_0FE9_P_2,
	VEX_W_0FEA_P_2, VEX_W_0FEB_P_2, VEX_W_0FEC_P_2, VEX_W_0FED_P_2,
	VEX_W_0FEE_P_2, VEX_W_0FEF_P_2, VEX_W_0FF0_P_3_M_0,
	VEX_W_0FF1_P_2, VEX_W_0FF2_P_2, VEX_W_0FF3_P_2, VEX_W_0FF4_P_2,
	VEX_W_0FF5_P_2, VEX_W_0FF6_P_2, VEX_W_0FF7_P_2, VEX_W_0FF8_P_2,
	VEX_W_0FF9_P_2, VEX_W_0FFA_P_2, VEX_W_0FFB_P_2, VEX_W_0FFC_P_2,
	VEX_W_0FFD_P_2, VEX_W_0FFE_P_2, VEX_W_0F3800_P_2,
	VEX_W_0F3801_P_2, VEX_W_0F3802_P_2, VEX_W_0F3803_P_2,
	VEX_W_0F3804_P_2, VEX_W_0F3805_P_2, VEX_W_0F3806_P_2,
	VEX_W_0F3807_P_2, VEX_W_0F3808_P_2, VEX_W_0F3809_P_2,
	VEX_W_0F380A_P_2, VEX_W_0F380B_P_2, VEX_W_0F3817_P_2,
	VEX_W_0F381C_P_2, VEX_W_0F381D_P_2, VEX_W_0F381E_P_2,
	VEX_W_0F3820_P_2, VEX_W_0F3821_P_2, VEX_W_0F3822_P_2,
	VEX_W_0F3823_P_2, VEX_W_0F3824_P_2, VEX_W_0F3825_P_2,
	VEX_W_0F3828_P_2, VEX_W_0F3829_P_2, VEX_W_0F382A_P_2_M_0,
	VEX_W_0F382B_P_2, VEX_W_0F3830_P_2, VEX_W_0F3831_P_2,
	VEX_W_0F3832_P_2, VEX_W_0F3833_P_2, VEX_W_0F3834_P_2,
	VEX_W_0F3835_P_2, VEX_W_0F3837_P_2, VEX_W_0F3838_P_2,
	VEX_W_0F3839_P_2, VEX_W_0F383A_P_2, VEX_W_0F383B_P_2,
	VEX_W_0F383C_P_2, VEX_W_0F383D_P_2, VEX_W_0F383E_P_2,
	VEX_W_0F383F_P_2, VEX_W_0F3840_P_2, VEX_W_0F3841_P_2,
	VEX_W_0F38DB_P_2, VEX_W_0F3A08_P_2, VEX_W_0F3A09_P_2,
	VEX_W_0F3A0A_P_2, VEX_W_0F3A0B_P_2, VEX_W_0F3A0C_P_2,
	VEX_W_0F3A0D_P_2, VEX_W_0F3A0E_P_2, VEX_W_0F3A0F_P_2,
	VEX_W_0F3A21_P_2, VEX_W_0F3A40_P_2, VEX_W_0F3A41_P_2,
	VEX_W_0F3A42_P_2, VEX_W_0F3A62_P_2, VEX_W_0F3A63_P_2 and
	VEX_W_0F3ADF_P_2 entries.
	(mod_table): Update MOD_VEX_0F2B, MOD_VEX_0F50,
	MOD_VEX_0FD7_PREFIX_2, MOD_VEX_0FE7_PREFIX_2,
	MOD_VEX_0FF0_PREFIX_3 and MOD_VEX_0F382A_PREFIX_2 entries.

2018-09-17  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl (VexWIG): New.
	Replace VexW=3 with VexWIG.

2018-09-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Set VexW=3 on AVX vrsqrtss.
	* i386-tbl.h: Regenerated.

2018-09-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/23665
	* i386-dis.c (vex_len_table): Update VEX_LEN_0F7E_P_1 and
	VEX_LEN_0FD6_P_2 entries.
	* i386-opc.tbl: Set Vex=1 on VEX.128 only vmovq.
	* i386-tbl.h: Regenerated.

2018-09-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/23642
	* i386-opc.h (VEXWIG): New.
	* i386-opc.tbl: Set VexW=3 on VEX/EVEX WIG instructions.
	* i386-tbl.h: Regenerated.

2018-09-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/23655
	* i386-dis-evex.h: Replace EXxEVexR with EXxEVexR64 for
	vcvtsi2sd%LQ and vcvtusi2sd%LQ.
	* i386-dis.c (EXxEVexR64): New.
	(evex_rounding_64_mode): Likewise.
	(OP_Rounding): Handle evex_rounding_64_mode.

2018-09-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/23655
	* i386-dis-evex.h (evex_table): Replace Eq with Edqa for
	vcvtsi2ss%LQ, vcvtsi2sd%LQ, vcvtusi2ss%LQ and vcvtusi2sd%LQ.
	* i386-dis.c (Edqa): New.
	(dqa_mode): Likewise.
	(intel_operand_size): Handle dqa_mode as m_mode.
	(OP_E_register): Handle dqa_mode as dq_mode.
	(OP_E_memory): Set shift for dqa_mode based on address_mode.

2018-09-14  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (OP_E_memory): Reformat.

2018-09-14  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (crc32): Fold byte and word forms.
	* i386-tbl.h: Re-generate.

2018-09-13  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Add VexW=1 to VEX.W0 VEX movd, cvtsi2ss, cvtsi2sd,
	pextrd, pinsrd, vcvtsi2sd, vcvtsi2ss, vmovd, vpextrd and vpinsrd.
	Add VexW=2 to VEX.W1 VEX movq, pextrq, pinsrq, vmovq, vpextrq and
	vpinsrq.  Remove VexW=1 from WIG VEX movq and vmovq.
	* i386-tbl.h: Regenerated.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (mov, movq, movdir64b): Drop IgnoreSize where
	meaningless.
	(invept, invvpid, vcvtph2ps, vcvtps2ph, bndmov, xrstors,
	xrstors64, xsaves, xsaves64, xsavec, xsavec64, rdpid, incsspq,
	rdsspq, saveprevssp, setssbsy, endbr32, endbr64): Drop IgnoreSize.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from AVX512_4FMAPS and
	AVX512_4VNNIW insns.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from AVX512DQ insns where
	meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from AVX512BW insns where
	meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from AVX512VL insns where
	meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from AVX512ER insns where
	meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from AVX512F insns where
	meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from SHA insns.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from XOP and SSE4a insns.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from AVX2 insns where
	meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from AVX insns where
	meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from GNFI insns.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from PCLMUL/VPCLMUL insns.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from AES/VAES insns.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from SSE4.2 insns where
	meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from SSE4.1 insns where
	meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from SSSE3 insns where
	meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from SSE3 insns where meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from SSE2 insns where meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop IgnoreSize from SSE insns where meaningless.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (crc32, incsspq, rdsspq): Drop Rex64.
	(vpbroadcastw, rdpid): Drop NoRex64.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vmovsd, vmovss): Fold register form load and
	store templates, adding D.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (bndmov, kmovb, kmovd, kmovq, kmovw, movapd,
	movaps, movd, movdqa, movdqu, movhpd, movhps, movlpd, movlps,
	movq, movsd, movss, movupd, movups, vmovapd, vmovaps, vmovd,
	vmovdqa, vmovdqa32, vmovdqa64, vmovdqu, vmovdqu16, vmovdqu32,
	vmovdqu64, vmovdqu8, vmovq, vmovsd, vmovss, vmovupd, vmovups):
	Fold load and store templates where possible, adding D. Drop
	IgnoreSize where it was pointlessly present. Drop redundant
	*word.
	* i386-tbl.h: Re-generate.

2018-09-13  Jan Beulich  <jbeulich@suse.com>

	* i386-dis.c (Mv_bnd, v_bndmk_mode): New.
	(mod_table): Use Mv_bnd for bndldx, bndstx, and bndmk.
	(intel_operand_size): Handle v_bndmk_mode.
	(OP_E_memory): Likewise. Produce (bad) when also riprel.

2018-09-08  John Darrington  <john@darrington.wattle.id.au>

	* disassemble.c (ARCH_s12z): Define if ARCH_all.

2018-08-31  Kito Cheng  <kito@andestech.com>

	* riscv-opc.c (riscv_opcodes): Fix incorrect subset info for
	compressed floating point instructions.

2018-08-30  Kito Cheng  <kito@andestech.com>

	* riscv-dis.c (riscv_disassemble_insn): Check XLEN by
	riscv_opcode.xlen_requirement.
	* riscv-opc.c (riscv_opcodes): Update for struct change.

2018-08-29  Martin Aberg  <maberg@gaisler.com>

	* sparc-opc.c (sparc_opcodes): Add Leon specific partial write
        psr (PWRPSR) instruction.

2018-08-29  Chenghua Xu  <paul.hua.gm@gmail.com>

	* mips-dis.c (mips_arch_choices): Add gs264e descriptors.

2018-08-29  Chenghua Xu  <paul.hua.gm@gmail.com>

	* mips-dis.c (mips_arch_choices): Add gs464e descriptors.

2018-08-29  Chenghua Xu  <paul.hua.gm@gmail.com>

	* mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep
	loongson3a as an alias of gs464 for compatibility.
	* mips-opc.c (mips_opcodes): Change Comments.

2018-08-29  Chenghua Xu  <paul.hua.gm@gmail.com>

	* mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext
	option.
	(print_mips_disassembler_options): Document -M loongson-ext.
	* mips-opc.c (LEXT2): New macro.
	(mips_opcodes): Add cto, ctz, dcto, dctz instructions.

2018-08-29  Chenghua Xu  <paul.hua.gm@gmail.com>

	 * mips-dis.c (mips_arch_choices): Add EXT to loongson3a
	 descriptors.
	 (parse_mips_ase_option): Handle -M loongson-ext option.
	 (print_mips_disassembler_options): Document -M loongson-ext.
	 * mips-opc.c (IL3A): Delete.
	 * mips-opc.c (LEXT): New macro.
	 (mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT
	 instructions.

2018-08-29  Chenghua Xu  <paul.hua.gm@gmail.com>

	* mips-dis.c (mips_arch_choices): Add CAM to loongson3a
	descriptors.
	(parse_mips_ase_option): Handle -M loongson-cam option.
	(print_mips_disassembler_options): Document -M loongson-cam.
	* mips-opc.c (LCAM): New macro.
	(mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM
	instructions.

2018-08-21  Alan Modra  <amodra@gmail.com>

	* ppc-dis.c (operand_value_powerpc): Init "invalid".
	(skip_optional_operands): Count optional operands, and update
	ppc_optional_operand_value call.
	* ppc-opc.c (extract_dxdn): Remove ATTRIBUTE_UNUSED from used arg.
	(extract_vlensi): Likewise.
	(extract_fxm): Return default value for missing optional operand.
	(extract_ls, extract_raq, extract_tbr): Likewise.
	(insert_sxl, extract_sxl): New functions.
	(insert_esync, extract_esync): Remove Power9 handling and simplify.
	(powerpc_operands <FXM4, TBR>): Delete PPC_OPERAND_OPTIONAL_VALUE
	flag and extra entry.
	(powerpc_operands <SXL>): Likewise, and use insert_sxl and
	extract_sxl.

2018-08-20  Alan Modra  <amodra@gmail.com>

	* sh-opc.h (MASK): Simplify.

2018-08-18  John Darrington  <john@darrington.wattle.id.au>

	* s12z-dis.c (bm_decode): Deal with cases where the mode is
	BM_RESERVED0 or BM_RESERVED1
	(bm_rel_decode, bm_n_bytes): Ditto.

2018-08-18  John Darrington  <john@darrington.wattle.id.au>

	* s12z.h: Delete.

2018-08-14  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (OP_E_memory): In 64-bit mode, display eiz for
	address with the addr32 prefix and without base nor index
	registers.

2018-08-11  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Add CpuCMOV and CpuFXSR to
	CPU_I686_FLAGS.  Add CPU_CMOV_FLAGS, CPU_FXSR_FLAGS,
	CPU_ANY_CMOV_FLAGS and CPU_ANY_FXSR_FLAGS.
	(cpu_flags): Add CpuCMOV and CpuFXSR.
	* i386-opc.tbl: Replace Cpu686 with CpuFXSR on fxsave, fxsave64,
	fxrstor and fxrstor64.  Replace Cpu686 with CpuCMOV on cmovCC.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2018-08-06  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-regs.h: Update auxiliary registers.

2018-08-06  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.h (RegRip, RegEip, RegEiz, RegRiz): Drop defines.
	(RegIP, RegIZ): Define.
	* i386-reg.tbl: Adjust comments.
	(rip): Use Qword instead of BaseIndex. Use RegIP.
	(eip): Use Dword instead of BaseIndex. Use RegIP.
	(riz): Add Qword. Use RegIZ.
	(eiz): Add Dword. Use RegIZ.
	* i386-tbl.h: Re-generate.

2018-08-03  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (pmovsxbw, pmovsxdq, pmovsxwd, pmovzxbw,
	pmovzxdq, pmovzxwd, vpmovsxbw, vpmovsxdq, vpmovsxwd, vpmovzxbw,
	vpmovzxdq, vpmovzxwd): Remove NoRex64.
	* i386-tbl.h: Re-generate.

2018-08-03  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (operand_types): Remove Mem field.
	* i386-opc.h (union i386_operand_type): Remove mem field.
	* i386-init.h, i386-tbl.h: Re-generate.

2018-08-01  Alan Modra  <amodra@gmail.com>

	* po/POTFILES.in: Regenerate.

2018-07-31  Nick Clifton  <nickc@redhat.com>

	* po/sv.po: Updated Swedish translation.

2018-07-31  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (kandnd, kandnq, kxord, kxorq): Add Optimize.
	* i386-init.h, i386-tbl.h: Re-generate.

2018-07-31  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.h (ZEROING_MASKING) Rename to ...
	(DYNAMIC_MASKING): ... this. Adjust comment.
	* i386-opc.tbl (MaskingMorZ): Define.
	(vcompresspd, vcompressps, vcvtps2ph, vextractf32x4,
	vextractf32x8, vextractf64x2, vextractf64x4, vextracti32x4,
	vextracti32x8, vextracti64x2, vextracti64x4, vmovapd, vmovaps,
	vmovdqa32, vmovdqa64, vmovdqu8, vmovdqu16, vmovdqu32, vmovdqu64,
	vmovupd, vmovups, vpcompressb, vpcompressw, vpcompressd,
	vpcompressq, vpmovdb, vpmovdw, vpmovqb, vpmovqd, vpmovqw,
	vpmovsdb, vpmovsdw, vpmovsqb, vpmovsqd, vpmovsqw, vpmovswb,
	vpmovusdb, vpmovusdw, vpmovusqb, vpmovusqd, vpmovusqw,
	vpmovuswb, vpmovwb): Fold AVX512 register and memory forms.

2018-07-31  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Use element rather than vector size for AVX512*
	scatter/gather insns.
	* i386-tbl.h: Re-generate.

2018-07-31  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (cpu_flag_init): Drop CpuVREX uses.
	(cpu_flags): Drop CpuVREX.
	* i386-opc.h (CpuVREX): Delete.
	(union i386_cpu_flags): Remove cpuvrex.
	* i386-init.h, i386-tbl.h: Re-generate.

2018-07-30  Jim Wilson  <jimw@sifive.com>

	* riscv-dis.c (riscv_disassemble_insn): Set insn_type and data_size
	fields.
	* riscv-opc.c (riscv_opcodes): Use new INSN_* flags to annotate insns.

2018-07-30  Andrew Jenner  <andrew@codesourcery.com>

	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
	* Makefile.in: Regenerated.
	* configure.ac: Add C-SKY.
	* configure: Regenerated.
	* csky-dis.c: New file.
	* csky-opc.h: New file.
	* disassemble.c (ARCH_csky): Define.
	(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
	* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.

2018-07-27  Alan Modra  <amodra@gmail.com>

	* ppc-opc.c (insert_sprbat): Correct function parameter and
	return type.
	(extract_sprbat): Likewise, variable too.

2018-07-26  Alex Chadwick  <Alex.Chadwick@cl.cam.ac.uk>
	    Alan Modra  <amodra@gmail.com>

	* ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway.
	(powerpc_init_dialect): Handle bfd_mach_ppc_750.
	* ppc-opc.c (insert_sprbat, extract_sprbat): New functions to
	support disjointed BAT.
	(powerpc_operands): Allow extra bit in SPRBAT_MASK.  Add SPRGQR.
	(XSPRGQR_MASK, GEKKO, BROADWAY): Define.
	(powerpc_opcodes): Add 750cl extended mnemonics for spr access.

2018-07-25  H.J. Lu  <hongjiu.lu@intel.com>
	    Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	* i386-gen.c (adjust_broadcast_modifier): New function.
	(process_i386_opcode_modifier): Add an argument for operands.
	Adjust the Broadcast value based on operands.
	(output_i386_opcode): Pass operand_types to
	process_i386_opcode_modifier.
	(process_i386_opcodes): Pass NULL as operands to
	process_i386_opcode_modifier.
	* i386-opc.h (BYTE_BROADCAST): New.
	(WORD_BROADCAST): Likewise.
	(DWORD_BROADCAST): Likewise.
	(QWORD_BROADCAST): Likewise.
	(i386_opcode_modifier): Expand broadcast to 3 bits.
	* i386-tbl.h: Regenerated.

2018-07-24  Alan Modra  <amodra@gmail.com>

	PR 23430
	* or1k-desc.h: Regenerate.

2018-07-24  Jan Beulich  <jbeulich@suse.com>

	* i386-dis-evex.h (evex_table): Add %LQ to vcvtsi2ss, vcvtsi2sd,
	vcvtusi2ss, and vcvtusi2sd.
	* i386-opc.tbl (vcvtsi2sd, vcvtusi2sd, vcvtsi2ss, vcvtusi2ss):
	Convert AVX512F variants to distinct CpuNo64 and Cpu64 forms.
	* i386-tbl.h: Re-generate.

2018-07-23  Claudiu Zissulescu <claziss@synopsys.com>

	* arc-opc.c (extract_w6): Fix extending the sign.

2018-07-23  Claudiu Zissulescu <claziss@synopsys.com>

	* arc-tbl.h (vewt): Allow it for ARC EM family.

2018-07-23  Alan Modra  <amodra@gmail.com>

	PR 23419
	* ppc-opc.c (powerpc_opcodes): Add mtupmc/mfupmc/mfpmc extended
	opcode variants for mtspr/mfspr encodings.

2018-07-20  Chenghua Xu  <paul.hua.gm@gmail.com>
	    Maciej W. Rozycki  <macro@mips.com>

	* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
	loongson3a descriptors.
	(parse_mips_ase_option): Handle -M loongson-mmi option.
	(print_mips_disassembler_options): Document -M loongson-mmi.
	* mips-opc.c (LMMI): New macro.
	(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
	instructions.

2018-07-19  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vcvtpd2dq, vcvtpd2ps, vcvttpd2dq, vcvtpd2udq,
	vcvtqq2ps, vcvtuqq2ps): Fold 128- and 256-bit templates. Drop
	IgnoreSize and [XYZ]MMword where applicable.
	* i386-tbl.h: Re-generate.

2018-07-19  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vfpclasspd, vfpclassps): Fold.
	(vfpclasspdz, vfpclasspsz): Drop IgnoreSize and ZmmWord.
	(vfpclasspdx, vfpclasspsx): Drop IgnoreSize and XmmWord.
	(vfpclasspdy, vfpclasspsy): Drop IgnoreSize and YmmWord.
	* i386-tbl.h: Re-generate.

2018-07-19  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Fold AVX512IFMA, AVX512VBMI, AVX512_VPOPCNTDQ,
	AVX512_VBMI2, AVX512_VNNI, AVX512_BITALG, GFNI, VAES, and
	VPCLMULQDQ templates into their respective AVX512VL counterparts
	where possible, using Disp8ShiftVL and CheckRegSize instead of
	Evex= plus Disp8MemShift= (plus often IgnoreSize) as appropriate.
	* i386-tbl.h: Re-generate.

2018-07-19  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Fold AVX512DQ templates into their respective
	AVX512VL counterparts where possible, using Disp8ShiftVL and
	CheckRegSize instead of Evex= plus Disp8MemShift= (plus often
	IgnoreSize) as appropriate.
	* i386-tbl.h: Re-generate.

2018-07-19  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Fold AVX512BW templates into their respective
	AVX512VL counterparts where possible, using Disp8ShiftVL and
	CheckRegSize instead of Evex= plus Disp8MemShift= (plus often
	IgnoreSize) as appropriate.
	* i386-tbl.h: Re-generate.

2018-07-19  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Fold AVX512CD templates into their respective
	AVX512VL counterparts where possible, using Disp8ShiftVL and
	CheckRegSize instead of Evex= plus Disp8MemShift= (plus often
	IgnoreSize) as appropriate.
	* i386-tbl.h: Re-generate.

2018-07-19  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.h (DISP8_SHIFT_VL): New.
	* i386-opc.tbl (Disp8ShiftVL):  Define.
	(various): Fold AVX512VL templates into their respective
	AVX512F counterparts where possible, using Disp8ShiftVL and
	CheckRegSize instead of Evex= plus Disp8MemShift= (plus often
	IgnoreSize) as appropriate.
	* i386-tbl.h: Re-generate.

2018-07-19  Jan Beulich  <jbeulich@suse.com>

	* Makefile.am: Change dependencies and rule for
	$(srcdir)/i386-init.h.
	* Makefile.in: Re-generate.
	* i386-gen.c (process_i386_opcodes): New local variable
	"marker". Drop opening of input file. Recognize marker and line
	number directives.
	* i386-opc.tbl (OPCODE_I386_H): Define.
	(i386-opc.h): Include it.
	(None): Undefine.

2018-07-18  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/23418
	* i386-opc.h (Byte): Update comments.
	(Word): Likewise.
	(Dword): Likewise.
	(Fword): Likewise.
	(Qword): Likewise.
	(Tbyte): Likewise.
	(Xmmword): Likewise.
	(Ymmword): Likewise.
	(Zmmword): Likewise.
	* i386-opc.tbl: Split vcvtps2qq, vcvtps2uqq, vcvttps2qq and
	vcvttps2uqq.
	* i386-tbl.h: Regenerated.

2018-07-12  Sudakshina Das  <sudi.das@arm.com>

	* aarch64-tbl.h (aarch64_opcode_table): Add entry for
	ssbb and pssbb and update dsb flags to F_HAS_ALIAS.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2018-07-12  Tamar Christina  <tamar.christina@arm.com>

	PR binutils/23192
	* aarch64-tbl.h (sqdmlal, sqdmlal2, smlsl, smlsl2, sqdmlsl, sqdmlsl2,
	mul, smull, smull2, sqdmull, sqdmull2, sqdmulh, sqrdmulh, mla, umlal,
	umlal2, mls, umlsl, umlsl2, umull, umull2, sqdmlal, sqdmlsl, sqdmull,
	sqdmulh, sqrdmulh): Use Em16.

2018-07-11  Sudakshina Das  <sudi.das@arm.com>

	* arm-dis.c (arm_opcodes): Add ssbb and pssbb and move
	csdb together with them.
	(thumb32_opcodes): Likewise.

2018-07-11  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (monitor, monitorx): Add 64-bit template
	requiring 32-bit registers as operands 2 and 3. Improve
	comments.
	(mwait, mwaitx): Fold templates. Improve comments.
	OPERAND_TYPE_INOUTPORTREG.
	* i386-tbl.h: Re-generate.

2018-07-11  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (operand_type_init): Remove
	OPERAND_TYPE_REG16_INOUTPORTREG entry and one instance of
	OPERAND_TYPE_INOUTPORTREG.
	* i386-init.h: Re-generate.

2018-07-11  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (wrssd, wrussd): Add Dword.
	(wrssq, wrussq): Add Qword.
	* i386-tbl.h: Re-generate.

2018-07-11  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.h: Rename OTMax to OTNum.
	(OTNumOfUints): Adjust calculation.
	(OTUnused): Directly alias to OTNum.

2018-07-09  Maciej W. Rozycki  <macro@mips.com>

	* s12z-dis.c (lea_reg_xys_opr): Rename `reg' local variable to
	`reg_xys'.
	(lea_reg_xys): Likewise.
	(print_insn_loop_primitive): Rename `reg' local variable to
	`reg_dxy'.

2018-07-06  Tamar Christina  <tamar.christina@arm.com>

	PR binutils/23242
	* aarch64-tbl.h (ldarh): Fix disassembly mask.

2018-07-06  Tamar Christina  <tamar.christina@arm.com>

	PR binutils/23369
	* aarch64-opc.c (aarch64_sys_regs): Make read/write csselr_el1,
	vsesr_el2, osdtrrx_el1, osdtrtx_el1, pmsidr_el1.

2018-07-02  Maciej W. Rozycki  <macro@mips.com>

	PR tdep/8282
	* mips-dis.c (mips_option_arg_t): New enumeration.
	(mips_options): New variable.
	(disassembler_options_mips): New function.
	(print_mips_disassembler_options): Reimplement in terms of
	`disassembler_options_mips'.
	* arm-dis.c (disassembler_options_arm): Adapt to using the
	`disasm_options_and_args_t' structure.
	* ppc-dis.c (disassembler_options_powerpc): Likewise.
	* s390-dis.c (disassembler_options_s390): Likewise.

2018-07-02  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* testsuite/ld-arm/tls-descrelax-be8.d: Add architecture version in
	expected result.
	* testsuite/ld-arm/tls-descrelax-v7.d: Likewise.
	* testsuite/ld-arm/tls-longplt-lib.d: Likewise.
	* testsuite/ld-arm/tls-longplt.d: Likewise.

2018-06-29  Tamar Christina  <tamar.christina@arm.com>

	PR binutils/23192
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Likewise.
	* aarch64-opc-2.c: Likewise.
	* aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint.
	* aarch64-opc.c (operand_general_constraint_met_p,
	aarch64_print_operand): Likewise.
	* aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal,
	smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl,
	fmlal2, fmlsl2.
	(AARCH64_OPERANDS): Add Em2.

2018-06-26  Nick Clifton  <nickc@redhat.com>

	* po/uk.po: Updated Ukranian translation.
	* po/de.po: Updated German translation.
	* po/pt_BR.po: Updated Brazilian Portuguese translation.

2018-06-26  Nick Clifton  <nickc@redhat.com>

	* nfp-dis.c: Fix spelling mistake.

2018-06-24  Nick Clifton  <nickc@redhat.com>

	* configure: Regenerate.
	* po/opcodes.pot: Regenerate.

2018-06-24  Nick Clifton  <nickc@redhat.com>

	2.31 branch created.

2018-06-19  Tamar Christina  <tamar.christina@arm.com>

	* aarch64-tbl.h (aarch64_opcode_table): Fix alias flag for negs
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Likewise.

2018-06-21  Maciej W. Rozycki  <macro@mips.com>

	* mips-dis.c (print_mips_disassembler_options): Fix a typo in
	`-M ginv' option description.

2018-06-20  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	PR gas/23305
	* riscv-opc.c (riscv_opcodes): Use new format specifier 'B' for
	la and lla.

2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

	* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
	* configure.ac: Remove AC_PREREQ.
	* Makefile.in: Re-generate.
	* aclocal.m4: Re-generate.
	* configure: Re-generate.

2018-06-14  Faraz Shahbazker  <Faraz.Shahbazker@mips.com>

	* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
	mips64r6 descriptors.
	(parse_mips_ase_option): Handle -Mginv option.
	(print_mips_disassembler_options): Document -Mginv.
	* mips-opc.c (decode_mips_operand) <+\>: New operand format.
	(GINV): New macro.
	(mips_opcodes): Define ginvi and ginvt.

2018-06-13  Scott Egerton  <scott.egerton@imgtec.com>
	    Faraz Shahbazker  <Faraz.Shahbazker@mips.com>

	* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
	* mips-opc.c (CRC, CRC64): New macros.
	(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
	crc32cb, crc32ch and crc32cw for CRC.  Define crc32d and
	crc32cd for CRC64.

2018-06-08  Egeyar Bagcioglu  <egeyar.bagcioglu@oracle.com>

	PR 20319
	* aarch64-tbl.h: Introduce QL_INT2FP_FMOV and QL_FP2INT_FMOV.
	(aarch64_opcode_table) : Use QL_INT2FP_FMOV and QL_FP2INT_FMOV.

2018-06-06  Alan Modra  <amodra@gmail.com>

	* xtensa-dis.c (print_insn_xtensa): Init fmt and valid_insn after
	setjmp.  Move init for some other vars later too.

2018-06-04  Max Filippov  <jcmvbkbc@gmail.com>

	* xtensa-dis.c (bfd.h, elf/xtensa.h): New includes.
	(dis_private): Add new fields for property section tracking.
	(xtensa_coalesce_insn_tables, xtensa_find_table_entry)
	(xtensa_instruction_fits): New functions.
	(fetch_data): Bump minimal fetch size to 4.
	(print_insn_xtensa): Make struct dis_private static.
	Load and prepare property table on section change.
	Don't disassemble literals. Don't disassemble instructions that
	cross property table boundaries.

2018-06-01  H.J. Lu  <hongjiu.lu@intel.com>

	* configure: Regenerated.

2018-06-01  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (mov, movq): Fold to/from SReg* forms.
	* i386-tbl.h: Re-generate.

2018-06-01  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (sldt, str): Add NoRex64.
	* i386-tbl.h: Re-generate.

2018-06-01  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (invpcid): Add Oword.
	* i386-tbl.h: Re-generate.

2018-06-01  Alan Modra  <amodra@gmail.com>

	* sysdep.h (_bfd_error_handler): Don't declare.
	* msp430-decode.opc: Include bfd.h.  Don't include ansidecl.h here.
	* rl78-decode.opc: Likewise.
	* msp430-decode.c: Regenerate.
	* rl78-decode.c: Regenerate.

2018-05-30  Amit Pawar <Amit.Pawar@amd.com>

	* i386-gen.c (cpu_flag_init): Add CPU_ZNVER2_FLAGS.
	* i386-init.h : Regenerated.

2018-05-25  Alan Modra  <amodra@gmail.com>

	* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.

2018-05-21  Peter Bergner  <bergner@vnet.ibm.com.com>

	* ppc-opc.c (insert_bat, extract_bat, insert_bba, extract_bba,
	insert_rbs, extract_rbs, insert_xb6s, extract_xb6s): Delete functions.
	(insert_bab, extract_bab, insert_btab, extract_btab,
	insert_rsb, extract_rsb, insert_xab6, extract_xab6): New functions.
	(BAT, BBA VBA RBS XB6S): Delete macros.
	(BTAB, BAB, VAB, RAB, RSB, XAB6): New macros.
	(BB, BD, RBX, XC6): Update for new macros.
	(powerpc_opcodes) <evmr, evnot, vmr, vnot, crnot, crclr, crset,
	crmove, not, not., mr, mr., xxspltd, xxswapd, xvmovsp, xvmovdp,
	e_crnot, e_crclr, e_crset, e_crmove>: Likewise.
	* ppc-dis.c (print_insn_powerpc): Delete handling of fake operands.

2018-05-18  John Darrington  <john@darrington.wattle.id.au>

	* Makefile.am: Add support for s12z architecture.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* s12z-dis.c: New file.
	* s12z.h: New file.

2018-05-18  Alan Modra  <amodra@gmail.com>

	* nfp-dis.c: Don't #include libbfd.h.
	(init_nfp3200_priv): Use bfd_get_section_contents.
	(nit_nfp6000_mecsr_sec): Likewise.

2018-05-17  Nick Clifton  <nickc@redhat.com>

	* po/zh_CN.po: Updated simplified Chinese translation.

2018-05-16  Tamar Christina  <tamar.christina@arm.com>

	PR binutils/23109
	* aarch64-tbl.h (aarch64_opcode_table): Correct sdot and udot.
	* aarch64-dis-2.c: Regenerate.

2018-05-15  Tamar Christina  <tamar.christina@arm.com>

	PR binutils/21446
	* aarch64-asm.c (opintl.h): Include.
	(aarch64_ins_sysreg): Enforce read/write constraints.
	* aarch64-dis.c (aarch64_ext_sysreg): Likewise.
	* aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here.
	(F_REG_READ, F_REG_WRITE): New.
	* aarch64-opc.c (aarch64_print_operand): Generate notes for
	AARCH64_OPND_SYSREG.
	(F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h.
	(aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0,
	mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1,
	id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1,
	id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1,
	id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1,
	mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1,
	id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1,
	id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1,
	id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1,
	csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2,
	rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0,
	mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1,
	mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1,
	pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0.
	* aarch64-tbl.h (aarch64_opcode_table): Add constraints to
	msr (F_SYS_WRITE), mrs (F_SYS_READ).

2018-05-15  Tamar Christina  <tamar.christina@arm.com>

	PR binutils/21446
	* aarch64-dis.c (no_notes: New.
	(parse_aarch64_dis_option): Support notes.
	(aarch64_decode_insn, print_operands): Likewise.
	(print_aarch64_disassembler_options): Document notes.
	* aarch64-opc.c (aarch64_print_operand): Support notes.

2018-05-15  Tamar Christina  <tamar.christina@arm.com>

	PR binutils/21446
	* aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean
	and take error struct.
	* aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane,
	aarch64_ins_reglist, aarch64_ins_ldst_reglist,
	aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist,
	aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half,
	aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm,
	aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits,
	aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm,
	aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple,
	aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm,
	aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12,
	aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg,
	aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier,
	aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended,
	aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl,
	aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl,
	aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6,
	aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw,
	aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
	aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw,
	aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm,
	aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov,
	aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist,
	aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm,
	aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two,
	aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise.
	* aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise.
	* aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane,
	aarch64_ext_reglist, aarch64_ext_ldst_reglist,
	aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist,
	aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half,
	aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm,
	aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits,
	aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm,
	aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple,
	aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm,
	aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12,
	aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg,
	aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier,
	aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended,
	aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl,
	aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl,
	aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6,
	aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw,
	aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
	aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw,
	aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm,
	aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov,
	aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist,
	aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm,
	aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two,
	aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise.
	(determine_disassembling_preference, aarch64_decode_insn,
	print_insn_aarch64_word, print_insn_data): Take errors struct.
	(print_insn_aarch64): Use errors.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-gen.c (print_operand_inserter): Use errors and change type to
	boolean in aarch64_insert_operan.
	(print_operand_extractor): Likewise.
	* aarch64-opc.c (aarch64_print_operand): Use sysreg struct.

2018-05-15  Francois H. Theron  <francois.theron@netronome.com>

	* nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.

2018-05-09  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Remove Disp<N> from movidir{i,64b}.

2018-05-09  Sebastian Rasmussen  <sebras@gmail.com>

	* cr16-opc.c (cr16_instruction): Comment typo fix.
	* hppa-dis.c (print_insn_hppa): Likewise.

2018-05-08  Jim Wilson  <jimw@sifive.com>

	* riscv-opc.c (match_c_slli, match_slli_as_c_slli): New.
	(match_c_slli64, match_srxi_as_c_srxi): New.
	(riscv_opcodes) <slli, sll>: Use match_slli_as_c_slli.
	<srli, srl, srai, sra>: Use match_srxi_as_c_srxi.
	<c.slli, c.srli, c.srai>: Use match_s_slli.
	<c.slli64, c.srli64, c.srai64>: New.

2018-05-08  Alan Modra  <amodra@gmail.com>

	* ppc-dis.c (PPC_OPCD_SEGS): Define using PPC_OP.
	(VLE_OPCD_SEGS, SPE2_OPCD_SEGS): Similarly, using macros used to
	partition opcode space for index lookup.

2018-05-07  Peter Bergner  <bergner@vnet.ibm.com.com>

	* ppc-dis.c (print_insn_powerpc) <insn_is_short>: Replace this...
	<insn_length>: ...with this.  Update usage.
	Remove duplicate call to *info->memory_error_func.

2018-05-07  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>
	    H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (Gva): New.
	(enum): Add PREFIX_0F38F8, PREFIX_0F38F9,
	MOD_0F38F8_PREFIX_2, MOD_0F38F9_PREFIX_0.
	(prefix_table): New instructions (see prefix above).
	(mod_table): New instructions (see prefix above).
	(OP_G): Handle va_mode.
	* i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS,
	CPU_MOVDIR64B_FLAGS.
	(cpu_flags): Add CpuMOVDIRI and CpuMOVDIR64B.
	* i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B.
	(i386_cpu_flags): Add cpumovdiri and cpumovdir64b.
	* i386-opc.tbl: Add movidir{i,64b}.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2018-05-07  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (opcode_modifiers): Replace AddrPrefixOp0 with
	AddrPrefixOpReg.
	* i386-opc.h (AddrPrefixOp0): Renamed to ...
	(AddrPrefixOpReg): This.
	(i386_opcode_modifier): Rename addrprefixop0 to addrprefixopreg.
	* i386-opc.tbl: Replace AddrPrefixOp0 with AddrPrefixOpReg.

2018-05-07  Peter Bergner  <bergner@vnet.ibm.com.com>

	* ppc-opc.c (powerpc_num_opcodes): Change type to unsigned.
	(vle_num_opcodes): Likewise.
	(spe2_num_opcodes): Likewise.
	* ppc-dis.c (disassemble_init_powerpc) <powerpc_opcd_indices>: Rewrite
	initialization loop.
	(disassemble_init_powerpc) <vle_opcd_indices>: Likewise.
	(disassemble_init_powerpc) <spe2_opcd_indices>: Likewise.  Initialize
	only once.

2018-05-01  Tamar Christina  <tamar.christina@arm.com>

	* aarch64-dis.c (aarch64_opcode_decode): Moved memory clear code.

2018-04-30  Francois H. Theron <francois.theron@netronome.com>

	Makefile.am: Added nfp-dis.c.
	configure.ac: Added bfd_nfp_arch.
	disassemble.h: Added print_insn_nfp prototype.
	disassemble.c: Added ARCH_nfp and call to print_insn_nfp
	nfp-dis.c: New, for NFP support.
	po/POTFILES.in: Added nfp-dis.c to the list.
	Makefile.in: Regenerate.
	configure: Regenerate.

2018-04-26  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Fold various non-memory operand AVX512VL
	templates into their base ones.
	* i386-tlb.h: Re-generate.

2018-04-26  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (cpu_flag_init): Use CPU_XOP_FLAGS for
	CPU_BDVER1_FLAGS. Use CPU_AVX2_FLAGS for CPU_ZNVER1_FLAGS. Use
	CPU_AVX_FLAGS for CPU_BTVER1_FLAGS. Add CPU_XSAVE_FLAGS to
	CPU_LWP_FLAGS, CPU_AVX_FLAGS, CPU_MPX_FLAGS, and CPU_OSPKE_FLAGS.
	* i386-init.h: Re-generate.

2018-04-26  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (cpu_flag_init): Drop all uses of CpuRegMMX,
	CpuRegXMM, CpuRegYMM, CpuRegZMM, and CpuRegMask. Use
	CPU_AVX2_FLAGS for CPU_AVX512F_FLAGS and drop bogus comment.
	Don't use CPU_AVX2_FLAGS for CPU_AVX512VL_FLAGS and drop bogus
	comment.
	(cpu_flags): Drop CpuRegMMX, CpuRegXMM, CpuRegYMM, CpuRegZMM,
	and CpuRegMask.
	* i386-opc.h: CpuRegMMX, CpuRegXMM, CpuRegYMM, CpuRegZMM,
	CpuRegMask: Delete.
	(union i386_cpu_flags): Remove cpuregmmx, cpuregxmm, cpuregymm,
	cpuregzmm, and cpuregmask.
	* i386-init.h: Re-generate.
	* i386-tbl.h: Re-generate.

2018-04-26  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (cpu_flag_init): CPU_I586_FLAGS inherits Cpu387 only.
	CPU_287_FLAGS is Cpu287 only. CPU_387_FLAGS is Cpu387 only.
	* i386-init.h: Re-generate.

2018-04-26  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (VexImmExt): Delete.
	* i386-opc.h (VexImmExt, veximmext): Delete.
	* i386-opc.tbl: Drop all VexImmExt uses.
	* i386-tlb.h: Re-generate.

2018-04-25  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vpslld, vpsrad, vpsrld): Drop AVX512VL
	register-only forms.
	* i386-tlb.h: Re-generate.

2018-04-25  Tamar Christina  <tamar.christina@arm.com>

	* aarch64-tbl.h (sqrdmlah, sqrdmlsh): Fix masks.

2018-04-17  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	* i386-dis.c: Add REG_0F1C_MOD_0, MOD_0F1C_PREFIX_0,
	PREFIX_0F1C.
	* i386-gen.c (cpu_flag_init): Add CPU_CLDEMOTE_FLAGS,
	(cpu_flags): Add CpuCLDEMOTE.
	* i386-init.h: Regenerate.
	* i386-opc.h (enum): Add CpuCLDEMOTE,
	(i386_cpu_flags): Add cpucldemote.
	* i386-opc.tbl: Add cldemote.
	* i386-tbl.h: Regenerate.

2018-04-16  Alan Modra  <amodra@gmail.com>

	* Makefile.am: Remove sh5 and sh64 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* sh-dis.c: Likewise.
	* sh64-dis.c: Delete.
	* sh64-opc.c: Delete.
	* sh64-opc.h: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

2018-04-16  Alan Modra  <amodra@gmail.com>

	* Makefile.am: Remove w65 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* w65-dis.c: Delete.
	* w65-opc.h: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

2018-04-16  Alan Modra  <amodra@gmail.com>

	* configure.ac: Remove we32k support.
	* configure: Regenerate.

2018-04-16  Alan Modra  <amodra@gmail.com>

	* Makefile.am: Remove m88k support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* m88k-dis.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

2018-04-16  Alan Modra  <amodra@gmail.com>

	* Makefile.am: Remove i370 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* i370-dis.c: Delete.
	* i370-opc.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

2018-04-16  Alan Modra  <amodra@gmail.com>

	* Makefile.am: Remove h8500 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* h8500-dis.c: Delete.
	* h8500-opc.h: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

2018-04-16  Alan Modra  <amodra@gmail.com>

	* configure.ac: Remove tahoe support.
	* configure: Regenerate.

2018-04-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (prefix_table): Replace Em with Edq on tpause and
	umwait.
	* i386-opc.tbl: Allow 32-bit registers for tpause and umwait in
	64-bit mode.
	* i386-tbl.h: Regenerated.

2018-04-11  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	* i386-dis.c (enum): Add PREFIX_MOD_0_0FAE_REG_6,
	PREFIX_MOD_1_0FAE_REG_6.
	(va_mode): New.
	(OP_E_register): Use va_mode.
	* i386-dis-evex.h (prefix_table):
	New instructions (see prefixes above).
	* i386-gen.c (cpu_flag_init): Add WAITPKG.
	(cpu_flags): Likewise.
	* i386-opc.h (enum): Likewise.
	(i386_cpu_flags): Likewise.
	* i386-opc.tbl: Add umonitor, umwait, tpause.
	* i386-init.h: Regenerate.
	* i386-tbl.h: Likewise.

2018-04-11  Alan Modra  <amodra@gmail.com>

	* opcodes/i860-dis.c: Delete.
	* opcodes/i960-dis.c: Delete.
	* Makefile.am: Remove i860 and i960 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

2018-04-04  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/23025
	* i386-dis.c (get_valid_dis386): Don't set vex.prefix nor vex.w
	to 0.
	(print_insn): Clear vex instead of vex.evex.

2018-04-04  Nick Clifton  <nickc@redhat.com>

	* po/es.po: Updated Spanish translation.

2018-03-28  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (opcode_modifiers): Delete VecESize.
	* i386-opc.h (VecESize): Delete.
	(struct i386_opcode_modifier): Delete vecesize.
	* i386-opc.tbl: Drop VecESize.
	* i386-tlb.h: Re-generate.

2018-03-28  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.h (NO_BROADCAST, BROADCAST_1TO16, BROADCAST_1TO8,
	BROADCAST_1TO4, BROADCAST_1TO2): Delete.
	(struct i386_opcode_modifier): Shrink broadcast field to 1 bit.
	* i386-opc.tbl: Replace Broadcast=<N> by Broadcast.
	* i386-tlb.h: Re-generate.

2018-03-28  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vcvt*d2si, vcvt*d2usi, vcvt*s2si, vcvt*s2usi):
	Fold AVX512 forms
	* i386-tlb.h: Re-generate.

2018-03-28  Jan Beulich  <jbeulich@suse.com>

	* i386-dis.c (prefix_table): Drop Y for cvt*2si.
	(vex_len_table): Drop Y for vcvt*2si.
	(putop): Replace plain 'Y' handling by abort().

2018-03-28  Nick Clifton  <nickc@redhat.com>

	PR 22988
	* aarch64-tbl.h (aarch64_opcode_table): Add entries for LDFF1xx
	instructions with only a base address register.
	* aarch64-opc.c (operand_general_constraint_met_p): Add code to
	handle AARHC64_OPND_SVE_ADDR_R.
	(aarch64_print_operand): Likewise.
	* aarch64-asm-2.c: Regenerate.
	* aarch64_dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2018-03-22  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl: Drop VecESize from register only insn forms and
	memory forms not allowing broadcast.
	* i386-tlb.h: Re-generate.

2018-03-22  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vfrczs*, vphadd*, vphsub*, vpmacs*, vpmadcs*,
	vprot*, vpsha*, vpshl*, bextr, blc*, bls*, t1mskc, tzmsk, sha1*,
	sha256*): Drop Disp<N>.

2018-03-22  Jan Beulich  <jbeulich@suse.com>

	* i386-dis.c (EbndS, bnd_swap_mode): New.
	(prefix_table): Use EbndS.
	(OP_E_register, OP_E_memory): Also handle bnd_swap_mode.
	* i386-opc.tbl (bndmov): Move misplaced Load.
	* i386-tlb.h: Re-generate.

2018-03-22  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vcvtdq2pd, vcvtps2pd, vcvtudq2pd): Use separate
	templates allowing memory operands and folded ones for register
	only flavors.
	* i386-tlb.h: Re-generate.

2018-03-22  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vfrczp*, vpcmov, vpermil2p*): Fold 128- and
	256-bit templates. Drop redundant leftover Disp<N>.
	* i386-tlb.h: Re-generate.

2018-03-14  Kito Cheng  <kito.cheng@gmail.com>

	* riscv-opc.c (riscv_insn_types): New.

2018-03-13  Nick Clifton  <nickc@redhat.com>

	* po/pt_BR.po: Updated Brazilian Portuguese translation.

2018-03-08  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Add Optimize to clr.
	* i386-tbl.h: Regenerated.

2018-03-08  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (opcode_modifiers): Remove OldGcc.
	* i386-opc.h (OldGcc): Removed.
	(i386_opcode_modifier): Remove oldgcc.
	* i386-opc.tbl: Remove fsubp, fsubrp, fdivp and fdivrp
	instructions for old (<= 2.8.1) versions of gcc.
	* i386-tbl.h: Regenerated.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.h (EVEXDYN): New.
	* i386-opc.tbl: Fold various AVX512VL templates.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vexpandpd, vexpandps, vmovapd, vmovaps,
	vmovdqa32, vmovdqa64, vmovdqu32, vmovdqu64, vmovupd, vmovups,
	vpexpandd, vpexpandq): Fold AFX512VF templates.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vgf2p8affineinvqb, vgf2p8affineqb, vgf2p8mulb):
	Fold 128- and 256-bit VEX-encoded templates.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vexpandpd, vexpandps, vmovapd, vmovaps,
	vmovdqa32, vmovdqa64, vmovdqu32, vmovdqu64, vmovupd, vmovups,
	vpexpandd, vpexpandq): Fold AVX512F templates.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (llwpcb, slwpcb, lwpval, lwpins): Fold 32- and
	64-bit templates. Drop Disp<N>.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vfmadd*, vfmsub*, vfnmadd*, vfnmsub*): Fold 128-
	and 256-bit templates.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (cmpxchg8b): Add NoRex64.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (cmpxchg16b, fisttp, fisttpll, bndmov, mwaitx):
	Drop NoAVX.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (ldmxcsr, stmxcsr): Add NoAVX.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (opcode_modifiers): Delete FloatD.
	* i386-opc.h (FloatD): Delete.
	(struct i386_opcode_modifier): Delete floatd.
	* i386-opc.tbl (fadd, fsub, fsubr, fmul, fdiv, fdivr): Replace
	FloatD by D.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-dis.c (float_reg): Adjust DC and DE fsub*/fdiv* patterns.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vmovd): Disallow Qword memory operands.
	* i386-tlb.h: Re-generate.

2018-03-08  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vcvtpd2ps): Fold AVX 128- and 256-bit memory
	forms.
	* i386-tlb.h: Re-generate.

2018-03-07  Alan Modra  <amodra@gmail.com>

	* disassemble.c (disassembler): Use bfd_arch_powerpc entry for
	bfd_arch_rs6000.
	* disassemble.h (print_insn_rs6000): Delete.
	* ppc-dis.c (powerpc_init_dialect): Handle rs6000.
	(disassemble_init_powerpc): Call powerpc_init_dialect for rs6000.
	(print_insn_rs6000): Delete.

2018-03-03  Alan Modra  <amodra@gmail.com>

	* sysdep.h (opcodes_error_handler): Define.
	(_bfd_error_handler): Declare.
	* Makefile.am: Remove stray #.
	* opc2c.c (main): Remove bogus -l arg handling.  Print "DO NOT
	EDIT" comment.
	* aarch64-dis.c, * arc-dis.c, * arm-dis.c, * avr-dis.c,
	* d30v-dis.c, * h8300-dis.c, * mmix-dis.c, * ppc-dis.c,
	* riscv-dis.c, * s390-dis.c, * sparc-dis.c, * v850-dis.c: Use
	opcodes_error_handler to print errors.  Standardize error messages.
	* msp430-decode.opc, * nios2-dis.c, * rl78-decode.opc: Likewise,
	and include opintl.h.
	* nds32-asm.c: Likewise, and include sysdep.h and opintl.h.
	* i386-gen.c: Standardize error messages.
	* msp430-decode.c, * rl78-decode.c, rx-decode.c: Regenerate.
	* Makefile.in: Regenerate.
	* epiphany-asm.c, * epiphany-desc.c, * epiphany-dis.c,
	* epiphany-ibld.c, * fr30-asm.c, * fr30-desc.c, * fr30-dis.c,
	* fr30-ibld.c, * frv-asm.c, * frv-desc.c, * frv-dis.c, * frv-ibld.c,
	* frv-opc.c, * ip2k-asm.c, * ip2k-desc.c, * ip2k-dis.c, * ip2k-ibld.c,
	* iq2000-asm.c, * iq2000-desc.c, * iq2000-dis.c, * iq2000-ibld.c,
	* lm32-asm.c, * lm32-desc.c, * lm32-dis.c, * lm32-ibld.c,
	* m32c-asm.c, * m32c-desc.c, * m32c-dis.c, * m32c-ibld.c,
	* m32r-asm.c, * m32r-desc.c, * m32r-dis.c, * m32r-ibld.c,
	* mep-asm.c, * mep-desc.c, * mep-dis.c, * mep-ibld.c, * mt-asm.c,
	* mt-desc.c, * mt-dis.c, * mt-ibld.c, * or1k-asm.c, * or1k-desc.c,
	* or1k-dis.c, * or1k-ibld.c, * xc16x-asm.c, * xc16x-desc.c,
	* xc16x-dis.c, * xc16x-ibld.c, * xstormy16-asm.c, * xstormy16-desc.c,
	* xstormy16-dis.c, * xstormy16-ibld.c: Regenerate.

2018-03-01  H.J. Lu  <hongjiu.lu@intel.com>

	* * i386-opc.tbl: Add "Optimize" to AVX256 and AVX512
	vpsub[bwdq] instructions.
	* i386-tbl.h: Regenerated.

2018-03-01  Alan Modra  <amodra@gmail.com>

	* configure.ac (ALL_LINGUAS): Sort.
	* configure: Regenerate.

2018-02-27  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* arm-dis.c (print_insn_coprocessor): Replace uses of ARM_FEATURE_COPY
	macro by assignements.

2018-02-27  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/22871
	* i386-gen.c (opcode_modifiers): Add Optimize.
	* i386-opc.h (Optimize): New enum.
	(i386_opcode_modifier): Add optimize.
	* i386-opc.tbl: Add "Optimize" to "mov $imm, reg",
	"sub reg, reg/mem", "test $imm, acc", "test $imm, reg/mem",
	"and $imm, acc", "and $imm, reg/mem", "xor reg, reg/mem",
	"movq $imm, reg" and AVX256 and AVX512 versions of vandnps,
	vandnpd, vpandn, vpandnd, vpandnq, vxorps, vxorpd, vpxor,
	vpxord and vpxorq.
	* i386-tbl.h: Regenerated.

2018-02-26  Alan Modra  <amodra@gmail.com>

	* crx-dis.c (getregliststring): Allocate a large enough buffer
	to silence false positive gcc8 warning.

2018-02-22  Shea Levy <shea@shealevy.com>

	* disassemble.c (ARCH_riscv): Define if ARCH_all.

2018-02-22  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Add {rex},
	* i386-tbl.h: Regenerated.

2018-02-20  Maciej W. Rozycki  <macro@mips.com>

	* mips16-opc.c (decode_mips16_operand) <'M'>: Remove case.
	(mips16_opcodes): Replace `M' with `m' for "restore".

2018-02-19  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* arm-dis.c (thumb_opcodes): Fix BXNS mask.

2018-02-13  Maciej W. Rozycki  <macro@mips.com>

	* wasm32-dis.c (print_insn_wasm32): Rename `index' local
	variable to `function_index'.

2018-02-13  Nick Clifton  <nickc@redhat.com>

	PR 22823
	* metag-dis.c (print_fmmov): Double buffer size to avoid warning
	about truncation of printing.

2018-02-12  Henry Wong <henry@stuffedcow.net>

	* mips-opc.c (mips_builtin_opcodes): Correct "sigrie" encoding.

2018-02-05  Nick Clifton  <nickc@redhat.com>

	* po/pt_BR.po: Updated Brazilian Portuguese translation.

2018-01-23  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	* i386-dis.c (enum): Add pconfig.
	* i386-gen.c (cpu_flag_init): Add CPU_PCONFIG_FLAGS.
	(cpu_flags): Add CpuPCONFIG.
	* i386-opc.h (enum): Add CpuPCONFIG.
	(i386_cpu_flags): Add cpupconfig.
	* i386-opc.tbl: Add PCONFIG instruction.
	* i386-init.h: Regenerate.
	* i386-tbl.h: Likewise.

2018-01-23  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	* i386-dis.c (enum): Add PREFIX_0F09.
	* i386-gen.c (cpu_flag_init): Add CPU_WBNOINVD_FLAGS.
	(cpu_flags): Add CpuWBNOINVD.
	* i386-opc.h (enum): Add CpuWBNOINVD.
	(i386_cpu_flags): Add cpuwbnoinvd.
	* i386-opc.tbl: Add WBNOINVD instruction.
	* i386-init.h: Regenerate.
	* i386-tbl.h: Likewise.

2018-01-17  Jim Wilson  <jimw@sifive.com>

	* riscv-opc.c (riscv_opcodes) <addi>: Use z instead of 0.

2018-01-17  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	* i386-gen.c (cpu_flag_init): Delete CPU_CET_FLAGS, CpuCET.
	Add CPU_IBT_FLAGS, CPU_SHSTK_FLAGS, CPY_ANY_IBT_FLAGS,
	CPU_ANY_SHSTK_FLAGS, CpuIBT, CpuSHSTK.
	(cpu_flags): Add CpuIBT, CpuSHSTK.
	* i386-opc.h (enum): Add CpuIBT, CpuSHSTK.
	(i386_cpu_flags): Add cpuibt, cpushstk.
	* i386-opc.tbl: Change CpuCET to CpuSHSTK and CpuIBT.
	* i386-init.h: Regenerate.
	* i386-tbl.h: Likewise.

2018-01-16  Nick Clifton  <nickc@redhat.com>

	* po/pt_BR.po: Updated Brazilian Portugese translation.
	* po/de.po: Updated German translation.

2018-01-15  Jim Wilson  <jimw@sifive.com>

	* riscv-opc.c (match_c_nop): New.
	(riscv_opcodes) <addi>: Handle an addi that compresses to c.nop.

2018-01-15  Nick Clifton  <nickc@redhat.com>

	* po/uk.po: Updated Ukranian translation.

2018-01-13  Nick Clifton  <nickc@redhat.com>

	* po/opcodes.pot: Regenerated.

2018-01-13  Nick Clifton  <nickc@redhat.com>

	* configure: Regenerate.

2018-01-13  Nick Clifton  <nickc@redhat.com>

	2.30 branch created.

2018-01-11  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	* i386-opc.tbl: Remove VL variants for 4FMAPS and 4VNNIW insns.
	* i386-tbl.h: Regenerate.

2018-01-10  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (v4fmaddss, v4fnmaddss): Adjust Disp8MemShift.
	* i386-tbl.h: Re-generate.

2018-01-10  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (vpcmpeqb, vpcmpleb, vpcmpltb, vpcmpneqb,
	vpcmpnleb, vpcmpnltb, vpcmpequb, vpcmpleub, vpcmpltub,
	vpcmpnequb, vpcmpnleub, vpcmpnltub, vpcmpeqw, vpcmplew,
	vpcmpltw, vpcmpneqw, vpcmpnlew, vpcmpnltw, vpcmpequw, vpcmpleuw,
	vpcmpltuw, vpcmpnequw, vpcmpnleuw, vpcmpnltuw): Adjust
	Disp8MemShift of AVX512VL forms.
	* i386-tbl.h: Re-generate.

2018-01-09  Jim Wilson  <jimw@sifive.com>

	* riscv-dis.c (maybe_print_address): If base_reg is zero,
	then the hi_addr value is zero.

2018-01-09  James Greenhalgh  <james.greenhalgh@arm.com>

	* arm-dis.c (arm_opcodes): Add csdb.
	(thumb32_opcodes): Add csdb.

2018-01-09  James Greenhalgh  <james.greenhalgh@arm.com>

	* aarch64-tbl.h (aarch64_opcode_table): Add "csdb".
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2018-01-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/22681
	* i386-opc.tbl: Properly encode vmovd with Qword memeory operand.
	Remove AVX512 vmovd with 64-bit operands.
	* i386-tbl.h: Regenerated.

2018-01-05  Jim Wilson  <jimw@sifive.com>

	* riscv-dis.c (print_insn_args) <'s'>: Call maybe_print_address for a
	jalr.

2018-01-03  Alan Modra  <amodra@gmail.com>

	Update year range in copyright notice of all files.

2018-01-02  Jan Beulich  <jbeulich@suse.com>

	* i386-gen.c (operand_type_init): Restore OPERAND_TYPE_REGYMM
	and OPERAND_TYPE_REGZMM entries.

For older changes see ChangeLog-2017

Copyright (C) 2018 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: