| 2020-12-10 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (riscv_opcodes): Add sext.[bh] and zext.[bhw]. |
| |
| 2020-12-10 Nelson Chu <nelson.chu@sifive.com> |
| |
| * disassemble.h (riscv_get_disassembler): Declare. |
| * disassemble.c (disassembler): Changed to riscv_get_disassembler. |
| * riscv-dis.c (riscv_get_disassembler): Check the elf privileged spec |
| attributes before calling print_insn_riscv. |
| (parse_riscv_dis_option): Same as the assembler, the priority of elf |
| attributes are higher than the options. If we find the privileged |
| attributes, but the -Mpriv-spec= is different, then output error/warning |
| and still use the elf attributes set. |
| |
| 2020-12-10 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (riscv_opcodes): Control fence.i and csr instructions by |
| zifencei and zicsr. |
| |
| 2020-12-04 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * s390-opc.txt: Add risbgz and risbgnz. |
| * s390-opc.c (U6_26): New operand type. |
| (INSTR_RIE_RRUUU2, MASK_RIE_RRUUU2): New instruction format and |
| mask. |
| |
| 2020-12-03 Andreas Krebbel <krebbel@linux.ibm.com> |
| |
| * s390-opc.txt: Add extended mnemonics. |
| |
| 2020-12-01 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (riscv_ext_version_table): Remove the p, v, n |
| and their versions. |
| |
| 2020-12-01 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (riscv_ext_version_table): Add zifencei. |
| |
| 2020-11-28 Borislav Petkov <bp@suse.de> |
| |
| * i386-dis.c (print_insn): Set active_seg_prefix for branch hint insns |
| to not dump branch hint prefixes 0x2E and 0x3E as unused prefixes. |
| |
| 2020-11-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-tbl.h (FLAGM): Handle for FLAGM feature. |
| (struct aarch64_opcode): Move FLAGM instructions from V8_4_INSN to |
| FLAGM_INSN. |
| (AARCH64_FEATURE_FLAGMANIP): Update comment for FEAT_FlagM2. |
| |
| 2020-11-14 Borislav Petkov <bp@suse.de> |
| |
| * i386-dis.c (ckprefix): Do not assign active_seg_prefix in |
| 64-bit addressing mode. |
| (NOTRACK_Fixup): Test prefixes for PREFIX_DS, instead of |
| active_seg_prefix. |
| |
| 2020-11-11 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-tbl.h: Enable -march=armv8.6-a+ls64. |
| |
| 2020-11-09 Spencer E. Olson <olsonse@umich.edu> |
| |
| * pru-opc.c: Add opcode description for LMBD (left-most bit |
| detect). |
| |
| 2020-11-09 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: Add ACCDATA_EL1 system register |
| |
| 2020-11-09 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c (aarch64_print_operand): Support operand AARCH64_OPND_Rt_LS64 |
| print. |
| * aarch64-tbl.h (struct aarch64_opcode): Update _LS64_INSN instructions with |
| Rt_ls64 operands. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2020-11-06 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-tbl.h (PAC): Handle for PAC feature. |
| (PAC_INSN): New PAC instruction. |
| (struct aarch64_opcode): Move PAC instructions from V8_3_INSN to |
| PAC_INSN. |
| |
| 2020-11-04 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: Add RAS 1.1 new system registers: ERXPFGCTL_EL1, |
| ERXPFGCDN_EL1, ERXMISC2_EL1, ERXMISC3_EL1 and ERXPFGF_EL1. |
| |
| 2020-11-03 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-tbl.h (QL_X2NIL): New qualifier for 64-byte stores. |
| (LS64): Handler with +ls64 feature flags. |
| (_LS64_INSN): New instruction group macro. |
| (struct aarch64_opcode): Add LS64 instructions. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch65-tbl.h (struct aarch64_opcode): New instruction WFIT. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out. |
| * aarch64-tbl.h (CSRE): New CSRE feature handler. |
| (_CSRE_INSN): New CSRE instruction type. |
| (struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-tbl.h (struct aarch64_opcode): Add new WFET instruction encoding |
| and operand description. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2020-10-26 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-opc.h (csky_v2_opcodes): Change plsl.u16 to plsl.16. |
| |
| 2020-10-26 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-dis.c (csky_output_operand): Add handler for |
| OPRND_TYPE_IMM5b_VSH and OPRND_TYPE_VREG_WITH_INDEX. |
| * csky-opc.h (OPRND_TYPE_VREG_WITH_INDEX): New enum. |
| (OPRND_TYPE_IMM5b_VSH): New enum. (csky_v2_opcodes): Fix and add |
| some instructions for VDSPV1. |
| |
| 2020-10-26 Lili Cui <lili.cui@intel.com> |
| |
| * i386-dis.c: Change "XV" to print "{vex}" pseudo prefix. |
| |
| 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter. |
| * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter |
| ins_barrier_dsb_nx. |
| * aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor. |
| * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor |
| ext_barrier_dsb_nx. |
| * aarch64-opc.c (aarch64_print_operand): New options table |
| aarch64_barrier_dsb_nxs_options. |
| * aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs. |
| * aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier |
| Armv8.7-a instruction. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2020-10-22 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * po/es.po: Remove the duplicated entry. |
| |
| 2020-10-20 Dr. David Alan Gilbert <dgilbert@redhat.com> |
| |
| * po/es.po: Fix printf format. |
| |
| 2020-10-20 Ganesh Gopalasubramanian <Ganesh.Gopalasubramanian@amd.com> |
| |
| * i386-dis.c (rm_table): Add tlbsync, snp, invlpgb. |
| * i386-gen.c (cpu_flag_init): Add new CPU_INVLPGB_FLAGS, |
| CPU_TLBSYNC_FLAGS, and CPU_SNP_FLAGS. |
| Add CPU_ZNVER3_FLAGS. |
| (cpu_flags): Add CpuINVLPGB, CpuTLBSYNC, CpuSNP. |
| * i386-opc.h: Add CpuINVLPGB, CpuTLBSYNC, CpuSNP. |
| * i386-opc.tbl: Add invlpgb, tlbsync, psmash, pvalidate, |
| rmpupdate, rmpadjust. |
| * i386-init.h: Re-generated. |
| * i386-tbl.h: Re-generated. |
| |
| 2020-10-16 Lili Cui <lili.cui@intel.com> |
| |
| * i386-opc.tbl: Rename CpuVEX_PREFIX to PseudoVexPrefix |
| and move it from cpu_flags to opcode_modifiers. |
| Use VexW0 and VexVVVV in the AVX-VNNI instructions. |
| * i386-gen.c: Likewise. |
| * i386-opc.h: Likewise. |
| * i386-opc.h: Likewise. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2020-10-16 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-tbl.h (ARMV8_7): New macro. |
| |
| 2020-10-14 H.J. Lu <hongjiu.lu@intel.com> |
| Lili Cui <lili.cui@intel.com> |
| |
| * i386-dis.c (PREFIX_VEX_0F3850): New. |
| (PREFIX_VEX_0F3851): Likewise. |
| (PREFIX_VEX_0F3852): Likewise. |
| (PREFIX_VEX_0F3853): Likewise. |
| (VEX_W_0F3850_P_2): Likewise. |
| (VEX_W_0F3851_P_2): Likewise. |
| (VEX_W_0F3852_P_2): Likewise. |
| (VEX_W_0F3853_P_2): Likewise. |
| (prefix_table): Add PREFIX_VEX_0F3850, PREFIX_VEX_0F3851, |
| PREFIX_VEX_0F3852 and PREFIX_VEX_0F3853. |
| (vex_table): Add VEX_W_0F3850_P_2, VEX_W_0F3851_P_2, |
| VEX_W_0F3852_P_2 and VEX_W_0F3853_P_2. |
| (putop): Add support for "XV" to print "{vex3}" pseudo prefix. |
| * i386-gen.c (cpu_flag_init): Clear the CpuAVX_VNNI bit in |
| CPU_UNKNOWN_FLAGS. Add CPU_AVX_VNNI_FLAGS and |
| CPU_ANY_AVX_VNNI_FLAGS. |
| (cpu_flags): Add CpuAVX_VNNI and CpuVEX_PREFIX. |
| * i386-opc.h (CpuAVX_VNNI): New. |
| (CpuVEX_PREFIX): Likewise. |
| (i386_cpu_flags): Add cpuavx_vnni and cpuvex_prefix. |
| * i386-opc.tbl: Add Intel AVX VNNI instructions. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2020-10-14 Lili Cui <lili.cui@intel.com> |
| H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (PREFIX_0F3A0F): New. |
| (MOD_0F3A0F_PREFIX_1): Likewise. |
| (REG_0F3A0F_PREFIX_1_MOD_3): Likewise. |
| (RM_0F3A0F_P_1_MOD_3_REG_0): Likewise. |
| (prefix_table): Add PREFIX_0F3A0F. |
| (mod_table): Add MOD_0F3A0F_PREFIX_1. |
| (reg_table): Add REG_0F3A0F_PREFIX_1_MOD_3. |
| (rm_table): Add RM_0F3A0F_P_1_MOD_3_REG_0. |
| * i386-gen.c (cpu_flag_init): Add HRESET_FLAGS, |
| CPU_ANY_HRESET_FLAGS. |
| (cpu_flags): Add CpuHRESET. |
| (output_i386_opcode): Allow 4 byte base_opcode. |
| * i386-opc.h (enum): Add CpuHRESET. |
| (i386_cpu_flags): Add cpuhreset. |
| * i386-opc.tbl: Add Intel HRESET instruction. |
| * i386-init.h: Regenerate. |
| * i386-tbl.h: Likewise. |
| |
| 2020-10-14 Lili Cui <lili.cui@intel.com> |
| |
| * i386-dis.c (enum): Add |
| PREFIX_MOD_3_0F01_REG_5_RM_4, |
| PREFIX_MOD_3_0F01_REG_5_RM_5, |
| PREFIX_MOD_3_0F01_REG_5_RM_6, |
| PREFIX_MOD_3_0F01_REG_5_RM_7, |
| X86_64_0F01_REG_5_MOD_3_RM_4_PREFIX_1, |
| X86_64_0F01_REG_5_MOD_3_RM_5_PREFIX_1, |
| X86_64_0F01_REG_5_MOD_3_RM_6_PREFIX_1, |
| X86_64_0F01_REG_5_MOD_3_RM_7_PREFIX_1, |
| X86_64_0FC7_REG_6_MOD_3_PREFIX_1. |
| (prefix_table): New instructions (see prefixes above). |
| (rm_table): Likewise |
| * i386-gen.c (cpu_flag_init): Add CPU_UINTR_FLAGS, |
| CPU_ANY_UINTR_FLAGS. |
| (cpu_flags): Add CpuUINTR. |
| * i386-opc.h (enum): Add CpuUINTR. |
| (i386_cpu_flags): Add cpuuintr. |
| * i386-opc.tbl: Add UINTR insns. |
| * i386-init.h: Regenerate. |
| * i386-tbl.h: Likewise. |
| |
| 2020-10-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (process_i386_opcode_modifier): Return 1 for |
| non-VEX/EVEX/prefix encoding. |
| (output_i386_opcode): Fail if non-VEX/EVEX/prefix base_opcode |
| has a prefix byte. |
| * i386-opc.tbl: Replace the prefix byte in non-VEX/EVEX |
| base_opcode with PREFIX_0X66, PREFIX_0XF2 or PREFIX_0XF3. |
| * i386-tbl.h: Regenerated. |
| |
| 2020-10-13 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (opcode_modifiers): Replace VexOpcode with |
| OpcodePrefix. |
| * i386-opc.h (VexOpcode): Renamed to ... |
| (OpcodePrefix): This. |
| (PREFIX_NONE): New. |
| (PREFIX_0X66): Likewise. |
| (PREFIX_0XF2): Likewise. |
| (PREFIX_0XF3): Likewise. |
| * i386-opc.tbl (Prefix_0X66): New. |
| (Prefix_0XF2): Likewise. |
| (Prefix_0XF3): Likewise. |
| Replace VexOpcode= with OpcodePrefix=. Use Prefix_0X66 on xorpd. |
| Use Prefix_0XF3 on cvtdq2pd. Use Prefix_0XF2 on cvtpd2dq. |
| * i386-tbl.h: Regenerated. |
| |
| 2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: Add BRBE system registers. |
| |
| 2020-10-08 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: New CSRE system registers defined. |
| |
| 2020-10-05 Samanta Navarro <ferivoz@riseup.net> |
| |
| * cgen-asm.c: Fix spelling mistakes. |
| * cgen-dis.c: Fix spelling mistakes. |
| * tic30-dis.c: Fix spelling mistakes. |
| |
| 2020-10-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/26704 |
| * i386-dis.c (putop): Always display suffix for %LQ in 64bit. |
| |
| 2020-10-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/26705 |
| * i386-dis.c (print_insn): Clear modrm if not needed. |
| (putop): Check need_modrm for modrm.mod != 3. Don't check |
| need_modrm for modrm.mod == 3. |
| |
| 2020-09-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: Added ETMv4 system registers TRCACATRn, TRCACVRn, |
| TRCAUTHSTATUS, TRCAUXCTLR, TRCBBCTLR, TRCCCCTLR, TRCCIDCCTLR0, TRCCIDCCTLR1, |
| TRCCIDCVRn, TRCCIDR0, TRCCIDR1, TRCCIDR2, TRCCIDR3, TRCCLAIMCLR, TRCCLAIMSET, |
| TRCCNTCTLRn, TRCCNTRLDVRn, TRCCNTVRn, TRCCONFIGR, TRCDEVAFF0, TRCDEVAFF1, |
| TRCDEVARCH, TRCDEVID, TRCDEVTYPE, TRCDVCMRn, TRCDVCVRn, TRCEVENTCTL0R, |
| TRCEVENTCTL1R, TRCEXTINSELR, TRCIDR0, TRCIDR1, TRCIDR2, TRCIDR3, TRCIDR4, |
| TRCIDR5, TRCIDR6, TRCIDR7, TRCIDR8, TRCIDR9, TRCIDR10, TRCIDR11, TRCIDR12, |
| TRCIDR13, TRCIMSPEC0, TRCIMSPECn, TRCITCTRL, TRCLAR WOTRCLSR, TRCOSLAR |
| WOTRCOSLSR, TRCPDCR, TRCPDSR, TRCPIDR0, TRCPIDR1, TRCPIDR2, TRCPIDR3, |
| TRCPIDR4, TRCPIDR[5,6,7], TRCPRGCTLR, TRCP,CSELR, TRCQCTLR, TRCRSCTLRn, |
| TRCSEQEVRn, TRCSEQRSTEVR, TRCSEQSTR, TRCSSCCRn, TRCSSCSRn, TRCSSPCICRn, |
| TRCSTALLCTLR, TRCSTATR, TRCSYNCPR, TRCTRACEIDR, TRCTSCTLR, TRCVDARCCTLR, |
| TRCVDCTLR, TRCVDSACCTLR, TRCVICTLR, TRCVIIECTLR, TRCVIPCSSCTLR, TRCVISSCTLR, |
| TRCVMIDCCTLR0, TRCVMIDCCTLR1 and TRCVMIDCVRn. |
| |
| 2020-09-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: Add ETE system registers TRCEXTINSELR<0-3> and TRCRSR. |
| |
| 2020-09-28 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c: Add TRBE system registers TRBIDR_EL1 , TRBBASER_EL1 , |
| TRBLIMITR_EL1 , TRBMAR_EL1 , TRBPTR_EL1, TRBSR_EL1 and TRBTRG_EL1. |
| |
| 2020-09-26 Alan Modra <amodra@gmail.com> |
| |
| * csky-opc.h: Formatting. |
| (GENERAL_REG_BANK): Correct spelling. Update use throughout file. |
| (get_register_name): Mask arch with CSKY_ARCH_MASK for shift, |
| and shift 1u. |
| (get_register_number): Likewise. |
| * csky-dis.c (get_gr_name, get_cr_name): Don't mask mach_flag. |
| |
| 2020-09-24 Lili Cui <lili.cui@intel.com> |
| |
| PR 26654 |
| * i386-dis.c (enum): Put MOD_VEX_0F38* together. |
| |
| 2020-09-24 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * csky-dis.c (csky_output_operand): Enclose body of if in curly |
| braces. |
| |
| 2020-09-24 Lili Cui <lili.cui@intel.com> |
| |
| * i386-dis.c (enum): Add PREFIX_0F01_REG_1_RM_5, |
| PREFIX_0F01_REG_1_RM_6, PREFIX_0F01_REG_1_RM_7, |
| X86_64_0F01_REG_1_RM_5_P_2, X86_64_0F01_REG_1_RM_6_P_2, |
| X86_64_0F01_REG_1_RM_7_P_2. |
| (prefix_table): Likewise. |
| (x86_64_table): Likewise. |
| (rm_table): Likewise. |
| * i386-gen.c (cpu_flag_init): Add CPU_TDX_FLAGS |
| and CPU_ANY_TDX_FLAGS. |
| (cpu_flags): Add CpuTDX. |
| * i386-opc.h (enum): Add CpuTDX. |
| (i386_cpu_flags): Add cputdx. |
| * i386-opc.tbl: Add TDX insns. |
| * i386-init.h: Regenerate. |
| * i386-tbl.h: Likewise. |
| |
| 2020-09-17 Cooper Qu <<cooper.qu@linux.alibaba.com>> |
| |
| * csky-dis.c (using_abi): New. |
| (parse_csky_dis_options): New function. |
| (get_gr_name): New function. |
| (get_cr_name): New function. |
| (csky_output_operand): Use get_gr_name and get_cr_name to |
| disassemble and add handle of OPRND_TYPE_IMM5b_LS. |
| (print_insn_csky): Parse disassembler options. |
| * csky-opc.h (OPRND_TYPE_IMM5b_LS): New enum. |
| (GENARAL_REG_BANK): Define. |
| (REG_SUPPORT_ALL): Define. |
| (REG_SUPPORT_ALL): New. |
| (ASH): Define. |
| (REG_SUPPORT_A): Define. |
| (REG_SUPPORT_B): Define. |
| (REG_SUPPORT_C): Define. |
| (REG_SUPPORT_D): Define. |
| (REG_SUPPORT_E): Define. |
| (csky_abiv1_general_regs): New. |
| (csky_abiv1_control_regs): New. |
| (csky_abiv2_general_regs): New. |
| (csky_abiv2_control_regs): New. |
| (get_register_name): New function. |
| (get_register_number): New function. |
| (csky_get_general_reg_name): New function. |
| (csky_get_general_regno): New function. |
| (csky_get_control_reg_name): New function. |
| (csky_get_control_regno): New function. |
| (csky_v2_opcodes): Prefer two oprerans format for bclri and |
| bseti, strengthen the operands legality check of addc, zext |
| and sext. |
| |
| 2020-09-23 Lili Cui <lili.cui@intel.com> |
| |
| * i386-dis.c (enum): Add REG_0F38D8_PREFIX_1, |
| MOD_0F38FA_PREFIX_1, MOD_0F38FB_PREFIX_1, |
| MOD_0F38DC_PREFIX_1, MOD_0F38DD_PREFIX_1, |
| MOD_0F38DE_PREFIX_1, MOD_0F38DF_PREFIX_1, |
| PREFIX_0F38D8, PREFIX_0F38FA, PREFIX_0F38FB. |
| (reg_table): New instructions (see prefixes above). |
| (prefix_table): Likewise. |
| (three_byte_table): Likewise. |
| (mod_table): Likewise |
| * i386-gen.c (cpu_flag_init): Add CPU_KL_FLAGS, CPU_WIDE_KL_FLAGS, |
| CPU_ANY_KL_FLAGS and CPU_ANY_WIDE_KL_FLAGS. |
| (cpu_flags): Likewise. |
| (operand_type_init): Likewise. |
| * i386-opc.h (enum): Add CpuKL and CpuWide_KL. |
| (i386_cpu_flags): Add cpukl and cpuwide_kl. |
| * i386-opc.tbl: Add KL and WIDE_KL insns. |
| * i386-init.h: Regenerate. |
| * i386-tbl.h: Likewise. |
| |
| 2020-09-21 Alan Modra <amodra@gmail.com> |
| |
| * rx-dis.c (flag_names): Add missing comma. |
| (register_names, flag_names, double_register_names), |
| (double_register_high_names, double_register_low_names), |
| (double_control_register_names, double_condition_names): Remove |
| trailing commas. |
| |
| 2020-09-18 David Faust <david.faust@oracle.com> |
| |
| * bpf-desc.c: Regenerate. |
| * bpf-desc.h: Likewise. |
| * bpf-opc.c: Likewise. |
| * bpf-opc.h: Likewise. |
| |
| 2020-09-16 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * csky-dis.c (csky_get_disassembler): Don't return NULL when there |
| is no BFD. |
| |
| 2020-09-16 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (ppc_symbol_is_valid): Adjust elf_symbol_from invocation. |
| |
| 2020-09-10 Nick Clifton <nickc@redhat.com> |
| |
| * ppc-dis.c (ppc_symbol_is_valid): New function. Returns false |
| for hidden, local, no-type symbols. |
| (disassemble_init_powerpc): Point the symbol_is_valid field in the |
| info structure at the new function. |
| |
| 2020-09-10 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-opc.h (csky_v2_opcodes): Add L2Cache instructions. |
| * testsuite/gas/csky/cskyv2_ck860.d : Adjust to icache.iva |
| opcode fixing. |
| |
| 2020-09-10 Nick Clifton <nickc@redhat.com> |
| |
| * csky-dis.c (csky_output_operand): Coerce the immediate values to |
| long before printing. |
| |
| 2020-09-10 Alan Modra <amodra@gmail.com> |
| |
| * csky-dis.c (csky_output_operand): Don't sprintf str to itself. |
| |
| 2020-09-07 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-opc.h (csky_v2_opcodes): Change mvtc and mulsw's |
| ISA flag. |
| |
| 2020-09-07 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-dis.c (csky_output_operand): Add handlers for |
| OPRND_TYPE_HFLOAT_FMOVI, OPRND_TYPE_SFLOAT_FMOVI and |
| OPRND_TYPE_DFLOAT_FMOVI. Refine OPRND_TYPE_FREGLIST_DASH |
| to support FPUV3 instructions. |
| * csky-opc.h (enum operand_type): New enum OPRND_TYPE_IMM9b, |
| OPRND_TYPE_HFLOAT_FMOVI, OPRND_TYPE_SFLOAT_FMOVI and |
| OPRND_TYPE_DFLOAT_FMOVI. |
| (OPRND_MASK_4_5, OPRND_MASK_6, OPRND_MASK_6_7, OPRND_MASK_6_8, |
| OPRND_MASK_7, OPRND_MASK_7_8, OPRND_MASK_17_24, |
| OPRND_MASK_20, OPRND_MASK_20_21, OPRND_MASK_20_22, |
| OPRND_MASK_20_23, OPRND_MASK_20_24, OPRND_MASK_20_25, |
| OPRND_MASK_0_3or5_8, OPRND_MASK_0_3or6_7, OPRND_MASK_0_3or25, |
| OPRND_MASK_0_4or21_24, OPRND_MASK_5or20_21, |
| OPRND_MASK_5or20_22, OPRND_MASK_5or20_23, OPRND_MASK_5or20_24, |
| OPRND_MASK_5or20_25, OPRND_MASK_8_9or21_25, |
| OPRND_MASK_8_9or16_25, OPRND_MASK_4_6or20, OPRND_MASK_5_7or20, |
| OPRND_MASK_4_5or20or25, OPRND_MASK_4_6or20or25, |
| OPRND_MASK_4_7or20or25, OPRND_MASK_6_9or17_24, |
| OPRND_MASK_6_7or20, OPRND_MASK_6or20, OPRND_MASK_7or20, |
| OPRND_MASK_5or8_9or16_25, OPRND_MASK_5or8_9or20_25): Define. |
| (csky_v2_opcodes): Add FPUV3 instructions. |
| |
| 2020-09-08 Alex Coplan <alex.coplan@arm.com> |
| |
| * aarch64-dis.c (print_operands): Pass CPU features to |
| aarch64_print_operand(). |
| * aarch64-opc.c (aarch64_print_operand): Use CPU features to determine |
| preferred disassembly of system registers. |
| (SR_RNG): Refactor to use new SR_FEAT2 macro. |
| (SR_FEAT2): New. |
| (SR_V8_1_A): New. |
| (SR_V8_4_A): New. |
| (SR_V8_A): New. |
| (SR_V8_R): New. |
| (SR_EXPAND_ELx): New. |
| (SR_EXPAND_EL12): New. |
| (aarch64_sys_regs): Specify which registers are only on |
| A-profile, add R-profile system registers. |
| (ENC_BARLAR): New. |
| (PRBARn_ELx): New. |
| (PRLARn_ELx): New. |
| (aarch64_sys_ins_reg_supported_p): Reject EL3 registers for |
| Armv8-R AArch64. |
| |
| 2020-09-08 Alex Coplan <alex.coplan@arm.com> |
| |
| * aarch64-tbl.h (aarch64_feature_v8_r): New. |
| (ARMV8_R): New. |
| (V8_R_INSN): New. |
| (aarch64_opcode_table): Add dfb. |
| * aarch64-opc-2.c: Regenerate. |
| * aarch64-asm-2.c: Regenerate. |
| * aarch64-dis-2.c: Regenerate. |
| |
| 2020-09-08 Alex Coplan <alex.coplan@arm.com> |
| |
| * aarch64-dis.c (arch_variant): New. |
| (determine_disassembling_preference): Disassemble according to |
| arch variant. |
| (select_aarch64_variant): New. |
| (print_insn_aarch64): Set feature set. |
| |
| 2020-09-02 Alan Modra <amodra@gmail.com> |
| |
| * v850-opc.c (insert_i5div1, insert_i5div2, insert_i5div3), |
| (insert_d5_4, insert_d8_6, insert_d8_7, insert_v8, insert_d9), |
| (insert_u16_loop, insert_d16_15, insert_d16_16, insert_d17_16), |
| (insert_d22, insert_d23, insert_d23_align1, insert_i9, insert_u9), |
| (insert_spe, insert_r4, insert_POS, insert_WIDTH, insert_SELID), |
| (insert_VECTOR8, insert_VECTOR5, insert_CACHEOP, insert_PREFOP), |
| (nsert_IMM10U, insert_SRSEL1, insert_SRSEL2): Use unsigned long |
| for value parameter and update code to suit. |
| (extract_d9, extract_d16_15, extract_d16_16, extract_d17_16), |
| (extract_d22, extract_d23, extract_i9): Use unsigned long variables. |
| |
| 2020-09-02 Alan Modra <amodra@gmail.com> |
| |
| * i386-dis.c (OP_E_memory): Don't cast to signed type when |
| negating. |
| (get32, get32s): Use unsigned types in shift expressions. |
| |
| 2020-09-02 Alan Modra <amodra@gmail.com> |
| |
| * csky-dis.c (print_insn_csky): Use unsigned type for "given". |
| |
| 2020-09-02 Alan Modra <amodra@gmail.com> |
| |
| * crx-dis.c: Whitespace. |
| (print_arg): Use unsigned type for longdisp and mask variables, |
| and for left shift constant. |
| |
| 2020-09-02 Alan Modra <amodra@gmail.com> |
| |
| * cgen-ibld.in (insert_normal, extract_normal): Use 1UL in left shift. |
| * bpf-ibld.c: Regenerate. |
| * epiphany-ibld.c: Regenerate. |
| * fr30-ibld.c: Regenerate. |
| * frv-ibld.c: Regenerate. |
| * ip2k-ibld.c: Regenerate. |
| * iq2000-ibld.c: Regenerate. |
| * lm32-ibld.c: Regenerate. |
| * m32c-ibld.c: Regenerate. |
| * m32r-ibld.c: Regenerate. |
| * mep-ibld.c: Regenerate. |
| * mt-ibld.c: Regenerate. |
| * or1k-ibld.c: Regenerate. |
| * xc16x-ibld.c: Regenerate. |
| * xstormy16-ibld.c: Regenerate. |
| |
| 2020-09-02 Alan Modra <amodra@gmail.com> |
| |
| * bfin-dis.c (MASKBITS): Use SIGNBIT. |
| |
| 2020-09-02 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-opc.h (csky_v2_opcodes): Move divul and divsl |
| to CSKYV2_ISA_3E3R3 instruction set. |
| |
| 2020-09-02 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-opc.h (csky_v2_opcodes): Fix Encode of mulsws. |
| |
| 2020-09-01 Alan Modra <amodra@gmail.com> |
| |
| * mep-ibld.c: Regenerate. |
| |
| 2020-08-31 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-dis.c (csky_output_operand): Assign dis_info.value for |
| OPRND_TYPE_VREG. |
| |
| 2020-08-30 Alan Modra <amodra@gmail.com> |
| |
| * cr16-dis.c: Formatting. |
| (parameter): Delete struct typedef. Use dwordU instead |
| throughout file. |
| (make_argument <arg_idxr>): Simplify detection of cbitb, sbitb |
| and tbitb. |
| (make_argument <arg_cr>): Extract 20-bit field not 16-bit. |
| |
| 2020-08-29 Alan Modra <amodra@gmail.com> |
| |
| PR 26446 |
| * csky-opc.h (MAX_OPRND_NUM): Define to 5. |
| (union csky_operand): Use MAX_OPRND_NUM to size oprnds array. |
| |
| 2020-08-28 Alan Modra <amodra@gmail.com> |
| |
| PR 26449 |
| PR 26450 |
| * cgen-ibld.in (insert_1): Use 1UL in forming mask. |
| (extract_normal): Likewise. |
| (insert_normal): Likewise, and move past zero length test. |
| (put_insn_int_value): Handle mask for zero length, use 1UL. |
| * bpf-ibld.c, * epiphany-ibld.c, * fr30-ibld.c, * frv-ibld.c, |
| * ip2k-ibld.c, * iq2000-ibld.c, * lm32-ibld.c, * m32c-ibld.c, |
| * m32r-ibld.c, * mep-ibld.c, * mt-ibld.c, * or1k-ibld.c, |
| * xc16x-ibld.c, * xstormy16-ibld.c: Regenerate. |
| |
| 2020-08-28 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-dis.c (CSKY_DEFAULT_ISA): Define. |
| (csky_dis_info): Add member isa. |
| (csky_find_inst_info): Skip instructions that do not belong to |
| current CPU. |
| (csky_get_disassembler): Get infomation from attribute section. |
| (print_insn_csky): Set defualt ISA flag. |
| * csky.h (CSKY_ISA_VDSP_2): Rename from CSKY_ISA_VDSP_V2. |
| * csky-opc.h (struct csky_opcode): Change isa_flag16 and |
| isa_flag32'type to unsigned 64 bits. |
| |
| 2020-08-26 Jose E. Marchesi <jemarch@gnu.org> |
| |
| * disassemble.c (enum epbf_isa_attr): Add ISA_XBPFBE, ISA_EBPFMAX. |
| |
| 2020-08-26 David Faust <david.faust@oracle.com> |
| |
| * bpf-desc.c: Regenerate. |
| * bpf-desc.h: Likewise. |
| * bpf-opc.c: Likewise. |
| * bpf-opc.h: Likewise. |
| * disassemble.c (disassemble_init_for_target): Set bits for xBPF |
| ISA when appropriate. |
| |
| 2020-08-25 Alan Modra <amodra@gmail.com> |
| |
| PR 26504 |
| * vax-dis.c (parse_disassembler_options): Always add at least one |
| to entry_addr_total_slots. |
| |
| 2020-08-24 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-dis.c (csky_find_inst_info): Skip CK860's instructions |
| in other CPUs to speed up disassembling. |
| * csky-opc.h (csky_v2_opcodes): Add CK860's instructions, |
| Change plsli.u16 to plsli.16, change sync's operand format. |
| |
| 2020-08-21 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-opc.h (csky_v2_opcodes): Add instruction bnezad. |
| |
| 2020-08-21 Nick Clifton <nickc@redhat.com> |
| |
| * aarch64-dis.c (get_sym_code_type): Return FALSE for non-ELF |
| symbols. |
| |
| 2020-08-21 Cooper Qu <cooper.qu@linux.alibaba.com> |
| |
| * csky-opc.h (csky_v2_opcodes): Add two operands form for bloop. |
| |
| 2020-08-19 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Replace OBF with BF for vcmpsq, |
| vcmpuq and xvtlsbb. |
| |
| 2020-08-18 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes) <xvcvbf16sp>: Rename from this... |
| <xvcvbf16spn>: ...to this. |
| |
| 2020-08-12 Alex Coplan <alex.coplan@arm.com> |
| |
| * aarch64-opc.c (aarch64_sys_regs): Add MPAM registers. |
| |
| 2020-08-12 Nick Clifton <nickc@redhat.com> |
| |
| * po/sr.po: Updated Serbian translation. |
| |
| 2020-08-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Move cctpl, cctpm and cctph. |
| |
| 2020-08-10 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> |
| |
| * aarch64-opc.c (aarch64_print_operand): |
| (aarch64_sys_reg_deprecated_p): Functions paramaters changed. |
| (aarch64_sys_reg_supported_p): Function removed. |
| (aarch64_sys_ins_reg_supported_p): Functions paramaters changed. |
| (aarch64_sys_ins_reg_supported_p): Merged aarch64_sys_reg_supported_p |
| into this function. |
| |
| 2020-08-10 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add many mtspr and mfspr extended |
| instructions. |
| |
| 2020-08-10 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add exser, msgsndu, msgclru. |
| Enable icbt for power5, miso for power8. |
| |
| 2020-08-10 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Prioritise mtfprd and mtvrd over |
| mtvsrd, and similarly for mfvsrd. |
| |
| 2020-08-04 Christian Groessler <chris@groessler.org> |
| Tadashi G. Takaoka <tadashi.g.takaoka@gmail.com> |
| |
| * z8kgen.c (opt): Fix "sout imm16,rs" and "soutb imm16,rbs" |
| opcodes (special "out" to absolute address). |
| * z8k-opc.h: Regenerate. |
| |
| 2020-07-30 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/26305 |
| * i386-opc.h (Prefix_Disp8): New. |
| (Prefix_Disp16): Likewise. |
| (Prefix_Disp32): Likewise. |
| (Prefix_Load): Likewise. |
| (Prefix_Store): Likewise. |
| (Prefix_VEX): Likewise. |
| (Prefix_VEX3): Likewise. |
| (Prefix_EVEX): Likewise. |
| (Prefix_REX): Likewise. |
| (Prefix_NoOptimize): Likewise. |
| * i386-opc.tbl: Use Prefix_XXX on pseudo prefixes. Add {disp16}. |
| * i386-tbl.h: Regenerated. |
| |
| 2020-07-29 Andreas Arnez <arnez@linux.ibm.com> |
| |
| * s390-mkopc.c (insertExpandedMnemonic): Handle unreachable |
| default case with abort() instead of printing an error message and |
| continuing, to avoid a maybe-uninitialized warning. |
| |
| 2020-07-24 Nick Clifton <nickc@redhat.com> |
| |
| * po/de.po: Updated German translation. |
| |
| 2020-07-21 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_E_memory): Revert previous change. |
| |
| 2020-07-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/26237 |
| * i386-dis.c (OP_E_memory): Don't display eiz with no scale |
| without base nor index registers. |
| |
| 2020-07-15 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (putop): Move 'V' and 'W' handling. |
| |
| 2020-07-15 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (dis386): Adjust 'V' description. Use P-based |
| construct for push/pop of register. |
| (putop): Honor cond when handling 'P'. Drop handling of plain |
| 'V'. |
| |
| 2020-07-15 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (dis386): Adjust 'P', 'T', 'U', and '@' |
| description. Drop '&' description. Use P for push of immediate, |
| pushf/popf, enter, and leave. Use %LP for lret/retf. |
| (dis386_twobyte): Use P for push/pop of fs/gs. |
| (reg_table): Use P for push/pop. Use @ for near call/jmp. |
| (x86_64_table): Use P for far call/jmp. |
| (putop): Drop handling of 'U' and '&'. Move and adjust handling |
| of '@'. Adjust handling of 'P' and 'T'. Drop case_P and case_Q |
| labels. |
| (OP_J): Drop marking of REX_W as used for v_mode (ISA-dependent) |
| and dqw_mode (unconditional). |
| |
| 2020-07-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/26237 |
| * i386-dis.c (OP_E_memory): Without base nor index registers, |
| 32-bit displacement to 64 bits. |
| |
| 2020-07-14 Claudiu Zissulescu <claziss@gmail.com> |
| |
| * arc-dis.c (print_insn_arc): Detect and emit a warning when a |
| faulty double register pair is detected. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_D): Print dr<N> instead of db<N> in Intel mode. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_R, Rm): Delete. |
| (MOD_0F24, MOD_0F26): Rename to ... |
| (X86_64_0F24, X86_64_0F26): ... respectively. |
| (dis386): Update 'L' and 'Z' comments. |
| (dis386_twobyte): Replace Rm by Em. Change opcode 0F24 and 0F26 |
| table references. |
| (mod_table): Move opcode 0F24 and 0F26 entries ... |
| (x86_64_table): ... here. |
| (putop): Drop handling of 'L'. Set modrm.mod to 3 for 'Z'. Move |
| 'Z' case block. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (Rd, Rdq, MaskR): Delete. |
| (MOD_EVEX_0F3828_P_1, MOD_EVEX_0F382A_P_1_W_1, |
| MOD_EVEX_0F3838_P_1, MOD_EVEX_0F383A_P_1_W_0, |
| MOD_EVEX_0F387A_W_0, MOD_EVEX_0F387B_W_0, |
| MOD_EVEX_0F387C): New enumerators. |
| (reg_table): Use Edq for rdssp. |
| (prefix_table): Use Edq for incssp. |
| (mod_table): Use Rm for move to/from %tr. Use MaskE for kand*, |
| kandn*, knot*, kor*, kxnor*, kxor*, kadd*, kunpck*, kortest*, |
| ktest*, and kshift*. Use Edq / MaskE for kmov*. |
| * i386-dis-evex.h: Reference mod_table[] for opcode 0F387C. |
| * i386-dis-evex-mod.h: New entries for opcodes 0F3828, 0F382A, |
| 0F3838, 0F383A, 0F387A, 0F387B, and 0F387C. |
| * i386-dis-evex-prefix.h: Reference mod_table[] for opcodes |
| 0F3828_P_1 and 0F3838_P_1. |
| * i386-dis-evex-w.h: Reference mod_table[] for opcodes |
| 0F382A_P_1, 0F383A_P_1, 0F387A, and 0F387B. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (PREFIX_0F01_REG_7_MOD_3_RM_3, |
| PREFIX_0FAE_REG_5_MOD_0, PREFIX_0FC3_MOD_0, PREFIX_0F38C8, |
| PREFIX_0F38C9, PREFIX_0F38CA, PREFIX_0F38CB, PREFIX_0F38CC, |
| PREFIX_0F38CD, PREFIX_0F38F9, PREFIX_0F3ACC, PREFIX_VEX_0F77, |
| PREFIX_VEX_0F38F2, PREFIX_VEX_0F38F3_REG_1, |
| PREFIX_VEX_0F38F3_REG_2, PREFIX_VEX_0F38F3_REG_3): Delete. |
| (MOD_0F38F9_PREFIX_0, VEX_LEN_0F77_P_0, VEX_LEN_0F38F2_P_0, |
| VEX_LEN_0F38F3_R_1_P_0, VEX_LEN_0F38F3_R_2_P_0, |
| VEX_LEN_0F38F3_R_3_P_0): Rename to ... |
| (MOD_0F38F9, VEX_LEN_0F77, VEX_LEN_0F38F2, VEX_LEN_0F38F3_R_1, |
| VEX_LEN_0F38F3_R_2, VEX_LEN_0F38F3_R_3): ... these respectively. |
| (reg_table, prefix_table, three_byte_table, vex_table, |
| vex_len_table, mod_table, rm_table): Replace / remove respective |
| entries. |
| (intel_operand_size, OP_E_register, OP_G): Avoid undue setting |
| of PREFIX_DATA in used_prefixes. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (MOD_VEX_0F3A30_L_0_W_0, MOD_VEX_0F3A30_L_0_W_1, |
| MOD_VEX_0F3A31_L_0_W_0, MOD_VEX_0F3A31_L_0_W_1, |
| MOD_VEX_0F3A32_L_0_W_0, MOD_VEX_0F3A32_L_0_W_1, |
| MOD_VEX_0F3A33_L_0_W_0, MOD_VEX_0F3A33_L_0_W_1): Replace by ... |
| (MOD_VEX_0F3A30_L_0, MOD_VEX_0F3A31_L_0, |
| MOD_VEX_0F3A32_L_0, MOD_VEX_0F3A33_L_0): ... these. |
| (VEX_W_0F3A30_L_0, VEX_W_0F3A31_L_0, VEX_W_0F3A32_L_0, |
| VEX_W_0F3A33_L_0): Delete. |
| (dis386): Adjust "BW" description. |
| (vex_len_table): Refer to mod_table[] for opcodes 0F3A30, |
| 0F3A31, 0F3A32, and 0F3A33. |
| (vex_w_table): Delete opcode 0F3A30, 0F3A31, 0F3A32, and 0F3A33 |
| entries. |
| (mod_table): Replace opcode 0F3A30, 0F3A31, 0F3A32, and 0F3A33 |
| entries. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (PREFIX_0F6C, PREFIX_0F6D, PREFIX_0F73_REG_3, |
| PREFIX_0F73_REG_7, PREFIX_0F3810, PREFIX_0F3814, PREFIX_0F3815, |
| PREFIX_0F3817, PREFIX_0F3820, PREFIX_0F3821, PREFIX_0F3822, |
| PREFIX_0F3823, PREFIX_0F3824, PREFIX_0F3825, PREFIX_0F3828, |
| PREFIX_0F3829, PREFIX_0F382A, PREFIX_0F382B, PREFIX_0F3830, |
| PREFIX_0F3831, PREFIX_0F3832, PREFIX_0F3833, PREFIX_0F3834, |
| PREFIX_0F3835, PREFIX_0F3837, PREFIX_0F3838, PREFIX_0F3839, |
| PREFIX_0F383A, PREFIX_0F383B, PREFIX_0F383C, PREFIX_0F383D, |
| PREFIX_0F383E, PREFIX_0F383F, PREFIX_0F3840, PREFIX_0F3841, |
| PREFIX_0F3880, PREFIX_0F3881, PREFIX_0F3882, PREFIX_0F38CF, |
| PREFIX_0F38DB, PREFIX_0F38DC, PREFIX_0F38DD, PREFIX_0F38DE, |
| PREFIX_0F38DF, PREFIX_0F38F5, PREFIX_0F3A08, PREFIX_0F3A09, |
| PREFIX_0F3A0A, PREFIX_0F3A0B, PREFIX_0F3A0C, PREFIX_0F3A0D, |
| PREFIX_0F3A0E, PREFIX_0F3A14, PREFIX_0F3A15, PREFIX_0F3A16, |
| PREFIX_0F3A17, PREFIX_0F3A20, PREFIX_0F3A21, PREFIX_0F3A22, |
| PREFIX_0F3A40, PREFIX_0F3A41, PREFIX_0F3A42, PREFIX_0F3A44, |
| PREFIX_0F3A60, PREFIX_0F3A61, PREFIX_0F3A62, PREFIX_0F3A63, |
| PREFIX_0F3ACE, PREFIX_0F3ACF, PREFIX_0F3ADF, PREFIX_VEX_0F60, |
| PREFIX_VEX_0F61, PREFIX_VEX_0F62, PREFIX_VEX_0F63, |
| PREFIX_VEX_0F64, PREFIX_VEX_0F65, PREFIX_VEX_0F66, |
| PREFIX_VEX_0F67, PREFIX_VEX_0F68, PREFIX_VEX_0F69, |
| PREFIX_VEX_0F6A, PREFIX_VEX_0F6B, PREFIX_VEX_0F6C, |
| PREFIX_VEX_0F6D, PREFIX_VEX_0F6E, PREFIX_VEX_0F71_REG_2, |
| PREFIX_VEX_0F71_REG_4, PREFIX_VEX_0F71_REG_6, |
| PREFIX_VEX_0F72_REG_2, PREFIX_VEX_0F72_REG_4, |
| PREFIX_VEX_0F72_REG_6, PREFIX_VEX_0F73_REG_2, |
| PREFIX_VEX_0F73_REG_3, PREFIX_VEX_0F73_REG_6, |
| PREFIX_VEX_0F73_REG_7, PREFIX_VEX_0F74, |
| PREFIX_VEX_0F75, PREFIX_VEX_0F76, PREFIX_VEX_0FC4, |
| PREFIX_VEX_0FC5, PREFIX_VEX_0FD1, PREFIX_VEX_0FD2, |
| PREFIX_VEX_0FD3, PREFIX_VEX_0FD4, PREFIX_VEX_0FD5, |
| PREFIX_VEX_0FD6, PREFIX_VEX_0FD7, PREFIX_VEX_0FD8, |
| PREFIX_VEX_0FD9, PREFIX_VEX_0FDA, PREFIX_VEX_0FDB, |
| PREFIX_VEX_0FDC, PREFIX_VEX_0FDD, PREFIX_VEX_0FDE, |
| PREFIX_VEX_0FDF, PREFIX_VEX_0FE0, PREFIX_VEX_0FE1, |
| PREFIX_VEX_0FE2, PREFIX_VEX_0FE3, PREFIX_VEX_0FE4, |
| PREFIX_VEX_0FE5, PREFIX_VEX_0FE7, PREFIX_VEX_0FE8, |
| PREFIX_VEX_0FE9, PREFIX_VEX_0FEA, PREFIX_VEX_0FEB, |
| PREFIX_VEX_0FEC, PREFIX_VEX_0FED, PREFIX_VEX_0FEE, |
| PREFIX_VEX_0FEF, PREFIX_VEX_0FF1, PREFIX_VEX_0FF2, |
| PREFIX_VEX_0FF3, PREFIX_VEX_0FF4, PREFIX_VEX_0FF5, |
| PREFIX_VEX_0FF6, PREFIX_VEX_0FF7, PREFIX_VEX_0FF8, |
| PREFIX_VEX_0FF9, PREFIX_VEX_0FFA, PREFIX_VEX_0FFB, |
| PREFIX_VEX_0FFC, PREFIX_VEX_0FFD, PREFIX_VEX_0FFE, |
| PREFIX_VEX_0F3800, PREFIX_VEX_0F3801, PREFIX_VEX_0F3802, |
| PREFIX_VEX_0F3803, PREFIX_VEX_0F3804, PREFIX_VEX_0F3805, |
| PREFIX_VEX_0F3806, PREFIX_VEX_0F3807, PREFIX_VEX_0F3808, |
| PREFIX_VEX_0F3809, PREFIX_VEX_0F380A, PREFIX_VEX_0F380B, |
| PREFIX_VEX_0F380C, PREFIX_VEX_0F380D, PREFIX_VEX_0F380E, |
| PREFIX_VEX_0F380F, PREFIX_VEX_0F3813, PREFIX_VEX_0F3816, |
| PREFIX_VEX_0F3817, PREFIX_VEX_0F3818, PREFIX_VEX_0F3819, |
| PREFIX_VEX_0F381A, PREFIX_VEX_0F381C, PREFIX_VEX_0F381D, |
| PREFIX_VEX_0F381E, PREFIX_VEX_0F3820, PREFIX_VEX_0F3821, |
| PREFIX_VEX_0F3822, PREFIX_VEX_0F3823, PREFIX_VEX_0F3824, |
| PREFIX_VEX_0F3825, PREFIX_VEX_0F3828, PREFIX_VEX_0F3829, |
| PREFIX_VEX_0F382A, PREFIX_VEX_0F382B, PREFIX_VEX_0F382C, |
| PREFIX_VEX_0F382D, PREFIX_VEX_0F382E, PREFIX_VEX_0F382F, |
| PREFIX_VEX_0F3830, PREFIX_VEX_0F3831, PREFIX_VEX_0F3832, |
| PREFIX_VEX_0F3833, PREFIX_VEX_0F3834, PREFIX_VEX_0F3835, |
| PREFIX_VEX_0F3836, PREFIX_VEX_0F3837, PREFIX_VEX_0F3838, |
| PREFIX_VEX_0F3839, PREFIX_VEX_0F383A, PREFIX_VEX_0F383B, |
| PREFIX_VEX_0F383C, PREFIX_VEX_0F383D, PREFIX_VEX_0F383E, |
| PREFIX_VEX_0F383F, PREFIX_VEX_0F3840, PREFIX_VEX_0F3841, |
| PREFIX_VEX_0F3845, PREFIX_VEX_0F3846, PREFIX_VEX_0F3847, |
| PREFIX_VEX_0F3858, PREFIX_VEX_0F3859, PREFIX_VEX_0F385A, |
| PREFIX_VEX_0F3878, PREFIX_VEX_0F3879, PREFIX_VEX_0F388C, |
| PREFIX_VEX_0F388E, PREFIX_VEX_0F3890, PREFIX_VEX_0F3891, |
| PREFIX_VEX_0F3892, PREFIX_VEX_0F3893, PREFIX_VEX_0F3896, |
| PREFIX_VEX_0F3897, PREFIX_VEX_0F3898, PREFIX_VEX_0F3899, |
| PREFIX_VEX_0F389A, PREFIX_VEX_0F389B, PREFIX_VEX_0F389C, |
| PREFIX_VEX_0F389D, PREFIX_VEX_0F389E, PREFIX_VEX_0F389F, |
| PREFIX_VEX_0F38A6, PREFIX_VEX_0F38A7, PREFIX_VEX_0F38A8, |
| PREFIX_VEX_0F38A9, PREFIX_VEX_0F38AA, PREFIX_VEX_0F38AB, |
| PREFIX_VEX_0F38AC, PREFIX_VEX_0F38AD, PREFIX_VEX_0F38AE, |
| PREFIX_VEX_0F38AF, PREFIX_VEX_0F38B6, PREFIX_VEX_0F38B7, |
| PREFIX_VEX_0F38B8, PREFIX_VEX_0F38B9, PREFIX_VEX_0F38BA, |
| PREFIX_VEX_0F38BB, PREFIX_VEX_0F38BC, PREFIX_VEX_0F38BD, |
| PREFIX_VEX_0F38BE, PREFIX_VEX_0F38BF, PREFIX_VEX_0F38CF, |
| PREFIX_VEX_0F38DB, PREFIX_VEX_0F38DC, PREFIX_VEX_0F38DD, |
| PREFIX_VEX_0F38DE, PREFIX_VEX_0F38DF, PREFIX_VEX_0F3A00, |
| PREFIX_VEX_0F3A01, PREFIX_VEX_0F3A02, PREFIX_VEX_0F3A04, |
| PREFIX_VEX_0F3A05, PREFIX_VEX_0F3A06, PREFIX_VEX_0F3A08, |
| PREFIX_VEX_0F3A09, PREFIX_VEX_0F3A0A, PREFIX_VEX_0F3A0B, |
| PREFIX_VEX_0F3A0C, PREFIX_VEX_0F3A0D, PREFIX_VEX_0F3A0E, |
| PREFIX_VEX_0F3A0F, PREFIX_VEX_0F3A14, PREFIX_VEX_0F3A15, |
| PREFIX_VEX_0F3A16, PREFIX_VEX_0F3A17, PREFIX_VEX_0F3A18, |
| PREFIX_VEX_0F3A19, PREFIX_VEX_0F3A1D, PREFIX_VEX_0F3A20, |
| PREFIX_VEX_0F3A21, PREFIX_VEX_0F3A22, PREFIX_VEX_0F3A30, |
| PREFIX_VEX_0F3A31, PREFIX_VEX_0F3A32, PREFIX_VEX_0F3A33, |
| PREFIX_VEX_0F3A38, PREFIX_VEX_0F3A39, PREFIX_VEX_0F3A40, |
| PREFIX_VEX_0F3A41, PREFIX_VEX_0F3A42, PREFIX_VEX_0F3A44, |
| PREFIX_VEX_0F3A46, PREFIX_VEX_0F3A48, PREFIX_VEX_0F3A49, |
| PREFIX_VEX_0F3A4A, PREFIX_VEX_0F3A4B, PREFIX_VEX_0F3A4C, |
| PREFIX_VEX_0F3A5C, PREFIX_VEX_0F3A5D, PREFIX_VEX_0F3A5E, |
| PREFIX_VEX_0F3A5F, PREFIX_VEX_0F3A60, PREFIX_VEX_0F3A61, |
| PREFIX_VEX_0F3A62, PREFIX_VEX_0F3A63, PREFIX_VEX_0F3A68, |
| PREFIX_VEX_0F3A69, PREFIX_VEX_0F3A6A, PREFIX_VEX_0F3A6B, |
| PREFIX_VEX_0F3A6C, PREFIX_VEX_0F3A6D, PREFIX_VEX_0F3A6E, |
| PREFIX_VEX_0F3A6F, PREFIX_VEX_0F3A78, PREFIX_VEX_0F3A79, |
| PREFIX_VEX_0F3A7A, PREFIX_VEX_0F3A7B, PREFIX_VEX_0F3A7C, |
| PREFIX_VEX_0F3A7D, PREFIX_VEX_0F3A7E, PREFIX_VEX_0F3A7F, |
| PREFIX_VEX_0F3ACE, PREFIX_VEX_0F3ACF, PREFIX_VEX_0F3ADF, |
| PREFIX_EVEX_0F64, PREFIX_EVEX_0F65, PREFIX_EVEX_0F66, |
| PREFIX_EVEX_0F6E, PREFIX_EVEX_0F71_REG_2, |
| PREFIX_EVEX_0F71_REG_4, PREFIX_EVEX_0F71_REG_6, |
| PREFIX_EVEX_0F72_REG_0, PREFIX_EVEX_0F72_REG_1, |
| PREFIX_EVEX_0F72_REG_2, PREFIX_EVEX_0F72_REG_4, |
| PREFIX_EVEX_0F72_REG_6, PREFIX_EVEX_0F73_REG_2, |
| PREFIX_EVEX_0F73_REG_3, PREFIX_EVEX_0F73_REG_6, |
| PREFIX_EVEX_0F73_REG_7, PREFIX_EVEX_0F74, PREFIX_EVEX_0F75, |
| PREFIX_EVEX_0F76, PREFIX_EVEX_0FC4, PREFIX_EVEX_0FC5, |
| PREFIX_EVEX_0FD6, PREFIX_EVEX_0FDB, PREFIX_EVEX_0FDF, |
| PREFIX_EVEX_0FE2, PREFIX_EVEX_0FE7, PREFIX_EVEX_0FEB, |
| PREFIX_EVEX_0FEF, PREFIX_EVEX_0F380D, PREFIX_EVEX_0F3816, |
| PREFIX_EVEX_0F3819, PREFIX_EVEX_0F381A, PREFIX_EVEX_0F381B, |
| PREFIX_EVEX_0F381E, PREFIX_EVEX_0F381F, PREFIX_EVEX_0F382C, |
| PREFIX_EVEX_0F382D, PREFIX_EVEX_0F3836, PREFIX_EVEX_0F3837, |
| PREFIX_EVEX_0F383B, PREFIX_EVEX_0F383D, PREFIX_EVEX_0F383F, |
| PREFIX_EVEX_0F3840, PREFIX_EVEX_0F3842, PREFIX_EVEX_0F3843, |
| PREFIX_EVEX_0F3844, PREFIX_EVEX_0F3845, PREFIX_EVEX_0F3846, |
| PREFIX_EVEX_0F3847, PREFIX_EVEX_0F384C, PREFIX_EVEX_0F384D, |
| PREFIX_EVEX_0F384E, PREFIX_EVEX_0F384F, PREFIX_EVEX_0F3850, |
| PREFIX_EVEX_0F3851, PREFIX_EVEX_0F3854, PREFIX_EVEX_0F3855, |
| PREFIX_EVEX_0F3859, PREFIX_EVEX_0F385A, PREFIX_EVEX_0F385B, |
| PREFIX_EVEX_0F3862, PREFIX_EVEX_0F3863, PREFIX_EVEX_0F3864, |
| PREFIX_EVEX_0F3865, PREFIX_EVEX_0F3866, PREFIX_EVEX_0F3870, |
| PREFIX_EVEX_0F3871, PREFIX_EVEX_0F3873, PREFIX_EVEX_0F3875, |
| PREFIX_EVEX_0F3876, PREFIX_EVEX_0F3877, PREFIX_EVEX_0F387A, |
| PREFIX_EVEX_0F387B, PREFIX_EVEX_0F387C, PREFIX_EVEX_0F387D, |
| PREFIX_EVEX_0F387E, PREFIX_EVEX_0F387F, PREFIX_EVEX_0F3883, |
| PREFIX_EVEX_0F3888, PREFIX_EVEX_0F3889, PREFIX_EVEX_0F388A, |
| PREFIX_EVEX_0F388B, PREFIX_EVEX_0F388D, PREFIX_EVEX_0F388F, |
| PREFIX_EVEX_0F3890, PREFIX_EVEX_0F3891, PREFIX_EVEX_0F3892, |
| PREFIX_EVEX_0F3893, PREFIX_EVEX_0F38A0, PREFIX_EVEX_0F38A1, |
| PREFIX_EVEX_0F38A2, PREFIX_EVEX_0F38A3, PREFIX_EVEX_0F38B4, |
| PREFIX_EVEX_0F38B5, PREFIX_EVEX_0F38C4, |
| PREFIX_EVEX_0F38C6_REG_1, PREFIX_EVEX_0F38C6_REG_2, |
| PREFIX_EVEX_0F38C6_REG_5, PREFIX_EVEX_0F38C6_REG_6, |
| PREFIX_EVEX_0F38C7_REG_1, PREFIX_EVEX_0F38C7_REG_2, |
| PREFIX_EVEX_0F38C7_REG_5, PREFIX_EVEX_0F38C7_REG_6, |
| PREFIX_EVEX_0F38C8, PREFIX_EVEX_0F38CA, PREFIX_EVEX_0F38CB, |
| PREFIX_EVEX_0F38CC, PREFIX_EVEX_0F38CD, PREFIX_EVEX_0F3A00, |
| PREFIX_EVEX_0F3A01, PREFIX_EVEX_0F3A03, PREFIX_EVEX_0F3A05, |
| PREFIX_EVEX_0F3A08, PREFIX_EVEX_0F3A09, PREFIX_EVEX_0F3A0A, |
| PREFIX_EVEX_0F3A0B, PREFIX_EVEX_0F3A14, PREFIX_EVEX_0F3A15, |
| PREFIX_EVEX_0F3A16, PREFIX_EVEX_0F3A17, PREFIX_EVEX_0F3A18, |
| PREFIX_EVEX_0F3A19, PREFIX_EVEX_0F3A1A, PREFIX_EVEX_0F3A1B, |
| PREFIX_EVEX_0F3A1E, PREFIX_EVEX_0F3A1F, PREFIX_EVEX_0F3A20, |
| PREFIX_EVEX_0F3A21, PREFIX_EVEX_0F3A22, PREFIX_EVEX_0F3A23, |
| PREFIX_EVEX_0F3A25, PREFIX_EVEX_0F3A26, PREFIX_EVEX_0F3A27, |
| PREFIX_EVEX_0F3A38, PREFIX_EVEX_0F3A39, PREFIX_EVEX_0F3A3A, |
| PREFIX_EVEX_0F3A3B, PREFIX_EVEX_0F3A3E, PREFIX_EVEX_0F3A3F, |
| PREFIX_EVEX_0F3A42, PREFIX_EVEX_0F3A43, PREFIX_EVEX_0F3A50, |
| PREFIX_EVEX_0F3A51, PREFIX_EVEX_0F3A54, PREFIX_EVEX_0F3A55, |
| PREFIX_EVEX_0F3A56, PREFIX_EVEX_0F3A57, PREFIX_EVEX_0F3A66, |
| PREFIX_EVEX_0F3A67, PREFIX_EVEX_0F3A70, PREFIX_EVEX_0F3A71, |
| PREFIX_EVEX_0F3A72, PREFIX_EVEX_0F3A73): Delete. |
| (MOD_0F382A_PREFIX_2, MOD_0F38F5_PREFIX_2, |
| MOD_VEX_0FD7_PREFIX_2, MOD_VEX_0FE7_PREFIX_2, |
| MOD_VEX_0F381A_PREFIX_2, MOD_VEX_0F382A_PREFIX_2, |
| MOD_VEX_0F382C_PREFIX_2, MOD_VEX_0F382D_PREFIX_2, |
| MOD_VEX_0F382E_PREFIX_2, MOD_VEX_0F382F_PREFIX_2, |
| MOD_VEX_0F385A_PREFIX_2, MOD_VEX_0F388C_PREFIX_2, |
| MOD_VEX_0F388E_PREFIX_2, MOD_VEX_W_0_0F3A30_P_2_LEN_0, |
| MOD_VEX_W_1_0F3A30_P_2_LEN_0, MOD_VEX_W_0_0F3A31_P_2_LEN_0, |
| MOD_VEX_W_1_0F3A31_P_2_LEN_0, MOD_VEX_W_0_0F3A32_P_2_LEN_0, |
| MOD_VEX_W_1_0F3A32_P_2_LEN_0, MOD_VEX_W_0_0F3A33_P_2_LEN_0, |
| MOD_VEX_W_1_0F3A33_P_2_LEN_0, MOD_EVEX_0F381A_P_2_W_0, |
| MOD_EVEX_0F381A_P_2_W_1, MOD_EVEX_0F381B_P_2_W_0, |
| MOD_EVEX_0F381B_P_2_W_1, MOD_EVEX_0F385A_P_2_W_0, |
| MOD_EVEX_0F385A_P_2_W_1, MOD_EVEX_0F385B_P_2_W_0, |
| MOD_EVEX_0F385B_P_2_W_1, VEX_LEN_0F6E_P_2, |
| VEX_LEN_0FC4_P_2, VEX_LEN_0FC5_P_2, VEX_LEN_0FD6_P_2, |
| VEX_LEN_0FF7_P_2, VEX_LEN_0F3816_P_2, VEX_LEN_0F3819_P_2, |
| VEX_LEN_0F381A_P_2_M_0, VEX_LEN_0F3836_P_2, |
| VEX_LEN_0F3841_P_2, VEX_LEN_0F385A_P_2_M_0, |
| VEX_LEN_0F38DB_P_2, VEX_LEN_0F3A00_P_2, VEX_LEN_0F3A01_P_2, |
| VEX_LEN_0F3A06_P_2, VEX_LEN_0F3A14_P_2, VEX_LEN_0F3A15_P_2, |
| VEX_LEN_0F3A16_P_2, VEX_LEN_0F3A17_P_2, VEX_LEN_0F3A18_P_2, |
| VEX_LEN_0F3A19_P_2, VEX_LEN_0F3A20_P_2, VEX_LEN_0F3A21_P_2, |
| VEX_LEN_0F3A22_P_2, VEX_LEN_0F3A30_P_2, VEX_LEN_0F3A31_P_2, |
| VEX_LEN_0F3A32_P_2, VEX_LEN_0F3A33_P_2, VEX_LEN_0F3A38_P_2, |
| VEX_LEN_0F3A39_P_2, VEX_LEN_0F3A41_P_2, VEX_LEN_0F3A46_P_2, |
| VEX_LEN_0F3A60_P_2, VEX_LEN_0F3A61_P_2, VEX_LEN_0F3A62_P_2, |
| VEX_LEN_0F3A63_P_2, VEX_LEN_0F3ADF_P_2, EVEX_LEN_0F6E_P_2, |
| EVEX_LEN_0FC4_P_2, EVEX_LEN_0FC5_P_2, EVEX_LEN_0FD6_P_2, |
| EVEX_LEN_0F3816_P_2, EVEX_LEN_0F3819_P_2_W_0, |
| EVEX_LEN_0F3819_P_2_W_1, EVEX_LEN_0F381A_P_2_W_0_M_0, |
| EVEX_LEN_0F381A_P_2_W_1_M_0, EVEX_LEN_0F381B_P_2_W_0_M_0, |
| EVEX_LEN_0F381B_P_2_W_1_M_0, EVEX_LEN_0F3836_P_2, |
| EVEX_LEN_0F385A_P_2_W_0_M_0, EVEX_LEN_0F385A_P_2_W_1_M_0, |
| EVEX_LEN_0F385B_P_2_W_0_M_0, EVEX_LEN_0F385B_P_2_W_1_M_0, |
| EVEX_LEN_0F38C6_REG_1_PREFIX_2, EVEX_LEN_0F38C6_REG_2_PREFIX_2, |
| EVEX_LEN_0F38C6_REG_5_PREFIX_2, EVEX_LEN_0F38C6_REG_6_PREFIX_2, |
| EVEX_LEN_0F38C7_R_1_P_2_W_0, EVEX_LEN_0F38C7_R_1_P_2_W_1, |
| EVEX_LEN_0F38C7_R_2_P_2_W_0, EVEX_LEN_0F38C7_R_2_P_2_W_1, |
| EVEX_LEN_0F38C7_R_5_P_2_W_0, EVEX_LEN_0F38C7_R_5_P_2_W_1, |
| EVEX_LEN_0F38C7_R_6_P_2_W_0, EVEX_LEN_0F38C7_R_6_P_2_W_1, |
| EVEX_LEN_0F3A00_P_2_W_1, EVEX_LEN_0F3A01_P_2_W_1, |
| EVEX_LEN_0F3A14_P_2, EVEX_LEN_0F3A15_P_2, EVEX_LEN_0F3A16_P_2, |
| EVEX_LEN_0F3A17_P_2, EVEX_LEN_0F3A18_P_2_W_0, |
| EVEX_LEN_0F3A18_P_2_W_1, EVEX_LEN_0F3A19_P_2_W_0, |
| EVEX_LEN_0F3A19_P_2_W_1, EVEX_LEN_0F3A1A_P_2_W_0, |
| EVEX_LEN_0F3A1A_P_2_W_1, EVEX_LEN_0F3A1B_P_2_W_0, |
| EVEX_LEN_0F3A1B_P_2_W_1, EVEX_LEN_0F3A20_P_2, |
| EVEX_LEN_0F3A21_P_2_W_0, EVEX_LEN_0F3A22_P_2, |
| EVEX_LEN_0F3A23_P_2_W_0, EVEX_LEN_0F3A23_P_2_W_1, |
| EVEX_LEN_0F3A38_P_2_W_0, EVEX_LEN_0F3A38_P_2_W_1, |
| EVEX_LEN_0F3A39_P_2_W_0, EVEX_LEN_0F3A39_P_2_W_1, |
| EVEX_LEN_0F3A3A_P_2_W_0, EVEX_LEN_0F3A3A_P_2_W_1, |
| EVEX_LEN_0F3A3B_P_2_W_0, EVEX_LEN_0F3A3B_P_2_W_1, |
| EVEX_LEN_0F3A43_P_2_W_0, EVEX_LEN_0F3A43_P_2_W_1 |
| VEX_W_0F380C_P_2, VEX_W_0F380D_P_2, VEX_W_0F380E_P_2, |
| VEX_W_0F380F_P_2, VEX_W_0F3813_P_2, VEX_W_0F3816_P_2, |
| VEX_W_0F3818_P_2, VEX_W_0F3819_P_2, |
| VEX_W_0F381A_P_2_M_0_L_0, VEX_W_0F382C_P_2_M_0, |
| VEX_W_0F382D_P_2_M_0, VEX_W_0F382E_P_2_M_0, |
| VEX_W_0F382F_P_2_M_0, VEX_W_0F3836_P_2, |
| VEX_W_0F3846_P_2, VEX_W_0F3858_P_2, VEX_W_0F3859_P_2, |
| VEX_W_0F385A_P_2_M_0_L_0, VEX_W_0F3878_P_2, |
| VEX_W_0F3879_P_2, VEX_W_0F38CF_P_2, VEX_W_0F3A00_P_2, |
| VEX_W_0F3A01_P_2, VEX_W_0F3A02_P_2, VEX_W_0F3A04_P_2, |
| VEX_W_0F3A05_P_2, VEX_W_0F3A06_P_2_L_0, |
| VEX_W_0F3A18_P_2_L_0, VEX_W_0F3A19_P_2_L_0, |
| VEX_W_0F3A1D_P_2, VEX_W_0F3A30_P_2_LEN_0, |
| VEX_W_0F3A31_P_2_LEN_0, VEX_W_0F3A32_P_2_LEN_0, |
| VEX_W_0F3A33_P_2_LEN_0, VEX_W_0F3A38_P_2_L_0, |
| VEX_W_0F3A39_P_2_L_0, VEX_W_0F3A46_P_2_L_0, |
| VEX_W_0F3A4A_P_2, VEX_W_0F3A4B_P_2, VEX_W_0F3A4C_P_2, |
| VEX_W_0F3ACE_P_2, VEX_W_0F3ACF_P_2, EVEX_W_0F66_P_2, |
| EVEX_W_0F72_R_2_P_2, EVEX_W_0F72_R_6_P_2, |
| EVEX_W_0F73_R_2_P_2, EVEX_W_0F73_R_6_P_2, |
| EVEX_W_0F76_P_2, EVEX_W_0FD6_P_2, EVEX_W_0FE7_P_2, |
| EVEX_W_0F380D_P_2, EVEX_W_0F3819_P_2, |
| EVEX_W_0F381A_P_2, EVEX_W_0F381B_P_2, |
| EVEX_W_0F381E_P_2, EVEX_W_0F381F_P_2, |
| EVEX_W_0F3837_P_2, EVEX_W_0F3859_P_2, |
| EVEX_W_0F385A_P_2, EVEX_W_0F385B_P_2, |
| EVEX_W_0F3870_P_2, EVEX_W_0F387A_P_2, |
| EVEX_W_0F387B_P_2, EVEX_W_0F3883_P_2, |
| EVEX_W_0F3891_P_2, EVEX_W_0F3893_P_2, |
| EVEX_W_0F38A1_P_2, EVEX_W_0F38A3_P_2, |
| EVEX_W_0F38C7_R_1_P_2, EVEX_W_0F38C7_R_2_P_2, |
| EVEX_W_0F38C7_R_5_P_2, EVEX_W_0F38C7_R_6_P_2, |
| EVEX_W_0F3A00_P_2, EVEX_W_0F3A01_P_2, |
| EVEX_W_0F3A05_P_2, EVEX_W_0F3A08_P_2, |
| EVEX_W_0F3A09_P_2, EVEX_W_0F3A0A_P_2, |
| EVEX_W_0F3A0B_P_2, EVEX_W_0F3A18_P_2, |
| EVEX_W_0F3A19_P_2, EVEX_W_0F3A1A_P_2, |
| EVEX_W_0F3A1B_P_2, EVEX_W_0F3A21_P_2, |
| EVEX_W_0F3A23_P_2, EVEX_W_0F3A38_P_2, |
| EVEX_W_0F3A39_P_2, EVEX_W_0F3A3A_P_2, |
| EVEX_W_0F3A3B_P_2, EVEX_W_0F3A42_P_2, |
| EVEX_W_0F3A43_P_2, EVEX_W_0F3A70_P_2, |
| EVEX_W_0F3A72_P_2): Rename to ... |
| (MOD_0F382A, MOD_0F38F5, MOD_VEX_0FD7, MOD_VEX_0FE7, |
| MOD_VEX_0F381A, MOD_VEX_0F382A, MOD_VEX_0F382C, MOD_VEX_0F382D, |
| MOD_VEX_0F382E, MOD_VEX_0F382F, MOD_VEX_0F385A, MOD_VEX_0F388C, |
| MOD_VEX_0F388E, MOD_VEX_0F3A30_L_0_W_0, |
| MOD_VEX_0F3A30_L_0_W_1, MOD_VEX_0F3A31_L_0_W_0, |
| MOD_VEX_0F3A31_L_0_W_1, MOD_VEX_0F3A32_L_0_W_0, |
| MOD_VEX_0F3A32_L_0_W_1, MOD_VEX_0F3A33_L_0_W_0, |
| MOD_VEX_0F3A33_L_0_W_1, MOD_EVEX_0F381A_W_0, |
| MOD_EVEX_0F381A_W_1, MOD_EVEX_0F381B_W_0, MOD_EVEX_0F381B_W_1, |
| MOD_EVEX_0F385A_W_0, MOD_EVEX_0F385A_W_1, MOD_EVEX_0F385B_W_0, |
| MOD_EVEX_0F385B_W_1, VEX_LEN_0F6E, VEX_LEN_0FC4, VEX_LEN_0FC5, |
| VEX_LEN_0FD6, VEX_LEN_0FF7, VEX_LEN_0F3816, VEX_LEN_0F3819, |
| VEX_LEN_0F381A_M_0, VEX_LEN_0F3836, VEX_LEN_0F3841, |
| VEX_LEN_0F385A_M_0, VEX_LEN_0F38DB, VEX_LEN_0F3A00, |
| VEX_LEN_0F3A01, VEX_LEN_0F3A06, VEX_LEN_0F3A14, VEX_LEN_0F3A15, |
| VEX_LEN_0F3A16, VEX_LEN_0F3A17, VEX_LEN_0F3A18, VEX_LEN_0F3A19, |
| VEX_LEN_0F3A20, VEX_LEN_0F3A21, VEX_LEN_0F3A22, VEX_LEN_0F3A30, |
| VEX_LEN_0F3A31, VEX_LEN_0F3A32, VEX_LEN_0F3A33, VEX_LEN_0F3A38, |
| VEX_LEN_0F3A39, VEX_LEN_0F3A41, VEX_LEN_0F3A46, VEX_LEN_0F3A60, |
| VEX_LEN_0F3A61, VEX_LEN_0F3A62, VEX_LEN_0F3A63, VEX_LEN_0F3ADF, |
| EVEX_LEN_0F6E, EVEX_LEN_0FC4, EVEX_LEN_0FC5, EVEX_LEN_0FD6, |
| EVEX_LEN_0F3816, EVEX_LEN_0F3819_W_0, EVEX_LEN_0F3819_W_1, |
| EVEX_LEN_0F381A_W_0_M_0, EVEX_LEN_0F381A_W_1_M_0, |
| EVEX_LEN_0F381B_W_0_M_0, EVEX_LEN_0F381B_W_1_M_0, |
| EVEX_LEN_0F3836, EVEX_LEN_0F385A_W_0_M_0, |
| EVEX_LEN_0F385A_W_1_M_0, EVEX_LEN_0F385B_W_0_M_0, |
| EVEX_LEN_0F385B_W_1_M_0, EVEX_LEN_0F38C6_R_1_M_0, |
| EVEX_LEN_0F38C6_R_2_M_0, EVEX_LEN_0F38C6_R_5_M_0, |
| EVEX_LEN_0F38C6_R_6_M_0, EVEX_LEN_0F38C7_R_1_M_0_W_0, |
| EVEX_LEN_0F38C7_R_1_M_0_W_1, EVEX_LEN_0F38C7_R_2_M_0_W_0, |
| EVEX_LEN_0F38C7_R_2_M_0_W_1, EVEX_LEN_0F38C7_R_5_M_0_W_0, |
| EVEX_LEN_0F38C7_R_5_M_0_W_1, EVEX_LEN_0F38C7_R_6_M_0_W_0, |
| EVEX_LEN_0F38C7_R_6_M_0_W_1, EVEX_LEN_0F3A00_W_1, |
| EVEX_LEN_0F3A01_W_1, EVEX_LEN_0F3A14, EVEX_LEN_0F3A15, |
| EVEX_LEN_0F3A16, EVEX_LEN_0F3A17, EVEX_LEN_0F3A18_W_0, |
| EVEX_LEN_0F3A18_W_1, EVEX_LEN_0F3A19_W_0, |
| EVEX_LEN_0F3A19_W_1, EVEX_LEN_0F3A1A_W_0, |
| EVEX_LEN_0F3A1A_W_1, EVEX_LEN_0F3A1B_W_0, |
| EVEX_LEN_0F3A1B_W_1, EVEX_LEN_0F3A20, EVEX_LEN_0F3A21_W_0, |
| EVEX_LEN_0F3A22, EVEX_LEN_0F3A23_W_0, EVEX_LEN_0F3A23_W_1, |
| EVEX_LEN_0F3A38_W_0, EVEX_LEN_0F3A38_W_1, |
| EVEX_LEN_0F3A39_W_0, EVEX_LEN_0F3A39_W_1, |
| EVEX_LEN_0F3A3A_W_0, EVEX_LEN_0F3A3A_W_1, |
| EVEX_LEN_0F3A3B_W_0, EVEX_LEN_0F3A3B_W_1, |
| EVEX_LEN_0F3A43_W_0, EVEX_LEN_0F3A43_W_1 |
| VEX_W_0F380C, VEX_W_0F380D, VEX_W_0F380E, VEX_W_0F380F, |
| VEX_W_0F3813, VEX_W_0F3816_L_1, VEX_W_0F3818, |
| VEX_W_0F3819_L_1, VEX_W_0F381A_M_0_L_1, VEX_W_0F382C_M_0, |
| VEX_W_0F382D_M_0, VEX_W_0F382E_M_0, VEX_W_0F382F_M_0, |
| VEX_W_0F3836, VEX_W_0F3846, VEX_W_0F3858, VEX_W_0F3859, |
| VEX_W_0F385A_M_0_L_0, VEX_W_0F3878, VEX_W_0F3879, |
| VEX_W_0F38CF, VEX_W_0F3A00_L_1, VEX_W_0F3A01_L_1, |
| VEX_W_0F3A02, VEX_W_0F3A04, VEX_W_0F3A05, VEX_W_0F3A06_L_1, |
| VEX_W_0F3A18_L_1, VEX_W_0F3A19_L_1, VEX_W_0F3A1D, |
| VEX_W_0F3A30_L_0, VEX_W_0F3A31_L_0, VEX_W_0F3A32_L_0, |
| VEX_W_0F3A33_L_0, VEX_W_0F3A38_L_1, VEX_W_0F3A39_L_1, |
| VEX_W_0F3A46_L_1, VEX_W_0F3A4A, VEX_W_0F3A4B, VEX_W_0F3A4C, |
| VEX_W_0F3ACE, VEX_W_0F3ACF, EVEX_W_0F66, EVEX_W_0F72_R_2, |
| EVEX_W_0F72_R_6, EVEX_W_0F73_R_2, EVEX_W_0F73_R_6, |
| EVEX_W_0F76, EVEX_W_0FD6_L_0, EVEX_W_0FE7, EVEX_W_0F380D, |
| EVEX_W_0F3819, EVEX_W_0F381A, EVEX_W_0F381B, EVEX_W_0F381E, |
| EVEX_W_0F381F, EVEX_W_0F3837, EVEX_W_0F3859, EVEX_W_0F385A, |
| EVEX_W_0F385B, EVEX_W_0F3870, EVEX_W_0F387A, EVEX_W_0F387B, |
| EVEX_W_0F3883, EVEX_W_0F3891, EVEX_W_0F3893, EVEX_W_0F38A1, |
| EVEX_W_0F38A3, EVEX_W_0F38C7_R_1_M_0, |
| EVEX_W_0F38C7_R_2_M_0, EVEX_W_0F38C7_R_5_M_0, |
| EVEX_W_0F38C7_R_6_M_0, EVEX_W_0F3A00, EVEX_W_0F3A01, |
| EVEX_W_0F3A05, EVEX_W_0F3A08, EVEX_W_0F3A09, EVEX_W_0F3A0A, |
| EVEX_W_0F3A0B, EVEX_W_0F3A18, EVEX_W_0F3A19, EVEX_W_0F3A1A, |
| EVEX_W_0F3A1B, EVEX_W_0F3A21, EVEX_W_0F3A23, EVEX_W_0F3A38, |
| EVEX_W_0F3A39, EVEX_W_0F3A3A, EVEX_W_0F3A3B, EVEX_W_0F3A42, |
| EVEX_W_0F3A43, EVEX_W_0F3A70, EVEX_W_0F3A72): ... these |
| respectively. |
| (dis386_twobyte, three_byte_table, vex_table, vex_len_table, |
| vex_w_table, mod_table): Replace / remove respective entries. |
| (print_insn): Move up dp->prefix_requirement handling. Handle |
| PREFIX_DATA. |
| * i386-dis-evex.h, i386-dis-evex-len.h, i386-dis-evex-mod.h, |
| i386-dis-evex-prefix.h, i386-dis-evex-reg.h, i386-dis-evex-w.h: |
| Replace / remove respective entries. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (PREFIX_EVEX_0F2C, PREFIX_EVEX_0F2D, |
| PREFIX_EVEX_0F2E, PREFIX_EVEX_0F2F): Delete. |
| (prefix_table): Add EXxEVexS operand to vcvttss2si, vcvttsd2si, |
| vcvtss2si, vcvtsd2si, vucomiss, and vucomisd table entries. |
| Retain X macro and PREFIX_OPCODE use from tjhe EVEX table for |
| the latter two. |
| * i386-dis-evex.h (evex_table): Reference VEX table for opcodes |
| 0F2C, 0F2D, 0F2E, and 0F2F. |
| * i386-dis-evex-prefix.h: Delete opcode 0F2C, 0F2D, 0F2E, and |
| 0F2F table entries. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_VexR, VexScalarR): New. |
| (OP_EX_Vex, OP_XMM_Vex, EXdVexScalarS, EXqVexScalarS, |
| XMVexScalar, d_scalar_swap_mode, q_scalar_swap_mode, |
| need_vex_reg): Delete. |
| (prefix_table): Replace VexScalar by VexScalarR and |
| XMVexScalar by XMScalar for vmovss and vmovsd. Replace |
| EXdVexScalarS by EXdS and EXqVexScalarS by EXqS. |
| (vex_len_table): Replace EXqVexScalarS by EXqS. |
| (get_valid_dis386): Don't set need_vex_reg. |
| (print_insn): Don't initialize need_vex_reg. |
| (intel_operand_size, OP_E_memory): Drop d_scalar_swap_mode and |
| q_scalar_swap_mode cases. |
| (OP_EX): Don't check for d_scalar_swap_mode and |
| q_scalar_swap_mode. |
| (OP_VEX): Done check need_vex_reg. |
| * i386-dis-evex-w.h: Replace VexScalar by VexScalarR and |
| XMVexScalar by XMScalar for vmovss and vmovsd. Replace |
| EXdVexScalarS by EXdS and EXqVexScalarS by EXqS. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (Vex128, Vex256, vex128_mode, vex256_mode): Delete. |
| (VEX_W_0F381A_P_2_M_0, VEX_W_0F385A_P_2_M_0, VEX_W_0F3A06_P_2, |
| VEX_W_0F3A18_P_2, VEX_W_0F3A19_P_2, VEX_W_0F3A38_P_2, |
| VEX_W_0F3A39_P_2, VEX_W_0F3A46_P_2): Rename to ... |
| (VEX_W_0F381A_P_2_M_0_L_0, VEX_W_0F385A_P_2_M_0_L_0, |
| VEX_W_0F3A06_P_2_L_0, VEX_W_0F3A18_P_2_L_0, |
| VEX_W_0F3A19_P_2_L_0, VEX_W_0F3A38_P_2_L_0, |
| VEX_W_0F3A39_P_2_L_0, VEX_W_0F3A46_P_2_L_0): ... respectively. |
| (vex_table): Replace Vex128 by Vex. |
| (vex_len_table): Likewise. Adjust referenced enum names. |
| (vex_w_table): Replace Vex128 and Vex256 by Vex. Adjust |
| referenced enum names. |
| (OP_VEX): Drop vex128_mode and vex256_mode cases. |
| * i386-dis-evex-len.h (evex_len_table): Replace Vex128 by Vex. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (dis386): "LW" description now applies to "DQ". |
| (putop): Handle "DQ". Don't handle "LW" anymore. |
| (prefix_table, mod_table): Replace %LW by %DQ. |
| * i386-dis-evex-len.h, i386-dis-evex-prefix.h: Likewise. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_E_memory): Move xmm_mw_mode, xmm_mb_mode, |
| dqd_mode, xmm_md_mode, d_mode, d_swap_mode, and |
| d_scalar_swap_mode case handling. Move shift adjsutment into |
| the case its applicable to. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (EVEX_W_0F3862_P_2, EVEX_W_0F3863_P_2): Delete. |
| (EXbScalar, EXwScalar): Fold to ... |
| (EXbwUnit): ... this. |
| (b_scalar_mode, w_scalar_mode): Fold to ... |
| (bw_unit_mode): ... this. |
| (intel_operand_size, OP_E_memory): Replace b_scalar_mode / |
| w_scalar_mode handling by bw_unit_mode one. |
| * i386-dis-evex-w.h: Move entries for opcodes 0F3862 and 0F3863 |
| ... |
| * i386-dis-evex-prefix.h: ... here. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (PCMPESTR_Fixup): Delete. |
| (dis386): Adjust "LQ" description. |
| (prefix_table): Make %LQ apply to AT&T case only for cvtsi2ss, |
| cvtsi2sd, ptwrite, vcvtsi2ss, and vcvtsi2sd. Replace use of |
| PCMPESTR_Fixup by !%LQ and EXx for pcmpestrm, pcmpestri, |
| vpcmpestrm, and vpcmpestri. |
| (putop): Honor "cond" when handling LQ. |
| * i386-dis-evex-prefix.h: Make %LQ apply to AT&T case only for |
| vcvtsi2ss and vcvtusi2ss. |
| * i386-dis-evex-w.h: Make %LQ apply to AT&T case only for |
| vcvtsi2sd and vcvtusi2sd. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (VCMP_Fixup, VCMP): Delete. |
| (simd_cmp_op): Add const. |
| (vex_cmp_op): Move up and drop initial 8 entries. Add const. |
| (CMP_Fixup): Handle VEX case. |
| (prefix_table): Replace VCMP by CMP. |
| * i386-dis-evex-prefix.h, i386-dis-evex-w.h: Likewise. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (MOVBE_Fixup): Delete. |
| (Mv): Define. |
| (prefix_table): Use Mv for movbe entries. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (CRC32_Fixup): Delete. |
| (prefix_table): Use Eb/Ev for crc32 entries. |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_E_register, OP_G, OP_REG, CRC32_Fixup): |
| Conditionalize invocations of "USED_REX (0)". |
| |
| 2020-07-14 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (eBX, eCX, eDX, eSP, eBP, eSI, eDI, DL, BL, AH, |
| CH, DH, BH, AX, DX): Delete. |
| (OP_IMREG): Drop handling of eBX_reg, eCX_reg, eDX_reg, eSP_reg, |
| eBP_reg, eSI_reg, eDI_reg, dl_reg, bl_reg, ah_reg, ch_reg, |
| dh_reg, bh_reg, ax_reg, and dx_reg. Simplify what's left. |
| |
| 2020-07-10 Lili Cui <lili.cui@intel.com> |
| |
| * i386-dis.c (TMM): New. |
| (EXtmm): Likewise. |
| (VexTmm): Likewise. |
| (MVexSIBMEM): Likewise. |
| (tmm_mode): Likewise. |
| (vex_sibmem_mode): Likewise. |
| (REG_VEX_0F3849_X86_64_P_0_W_0_M_1): Likewise. |
| (MOD_VEX_0F3849_X86_64_P_0_W_0): Likewise. |
| (MOD_VEX_0F3849_X86_64_P_2_W_0): Likewise. |
| (MOD_VEX_0F3849_X86_64_P_3_W_0): Likewise. |
| (MOD_VEX_0F384B_X86_64_P_1_W_0): Likewise. |
| (MOD_VEX_0F384B_X86_64_P_2_W_0): Likewise. |
| (MOD_VEX_0F384B_X86_64_P_3_W_0): Likewise. |
| (MOD_VEX_0F385C_X86_64_P_1_W_0): Likewise. |
| (MOD_VEX_0F385E_X86_64_P_0_W_0): Likewise. |
| (MOD_VEX_0F385E_X86_64_P_1_W_0): Likewise. |
| (MOD_VEX_0F385E_X86_64_P_2_W_0): Likewise. |
| (MOD_VEX_0F385E_X86_64_P_3_W_0): Likewise. |
| (RM_VEX_0F3849_X86_64_P_0_W_0_M_1_R_0): Likewise. |
| (PREFIX_VEX_0F3849_X86_64): Likewise. |
| (PREFIX_VEX_0F384B_X86_64): Likewise. |
| (PREFIX_VEX_0F385C_X86_64): Likewise. |
| (PREFIX_VEX_0F385E_X86_64): Likewise. |
| (X86_64_VEX_0F3849): Likewise. |
| (X86_64_VEX_0F384B): Likewise. |
| (X86_64_VEX_0F385C): Likewise. |
| (X86_64_VEX_0F385E): Likewise. |
| (VEX_LEN_0F3849_X86_64_P_0_W_0_M_0): Likewise. |
| (VEX_LEN_0F3849_X86_64_P_0_W_0_M_1_REG_0_RM_0): Likewise. |
| (VEX_LEN_0F3849_X86_64_P_2_W_0_M_0): Likewise. |
| (VEX_LEN_0F3849_X86_64_P_3_W_0_M_0): Likewise. |
| (VEX_LEN_0F384B_X86_64_P_1_W_0_M_0): Likewise. |
| (VEX_LEN_0F384B_X86_64_P_2_W_0_M_0): Likewise. |
| (VEX_LEN_0F384B_X86_64_P_3_W_0_M_0): Likewise. |
| (VEX_LEN_0F385C_X86_64_P_1_W_0_M_0): Likewise. |
| (VEX_LEN_0F385E_X86_64_P_0_W_0_M_0): Likewise. |
| (VEX_LEN_0F385E_X86_64_P_1_W_0_M_0): Likewise. |
| (VEX_LEN_0F385E_X86_64_P_2_W_0_M_0): Likewise. |
| (VEX_LEN_0F385E_X86_64_P_3_W_0_M_0): Likewise. |
| (VEX_W_0F3849_X86_64_P_0): Likewise. |
| (VEX_W_0F3849_X86_64_P_2): Likewise. |
| (VEX_W_0F3849_X86_64_P_3): Likewise. |
| (VEX_W_0F384B_X86_64_P_1): Likewise. |
| (VEX_W_0F384B_X86_64_P_2): Likewise. |
| (VEX_W_0F384B_X86_64_P_3): Likewise. |
| (VEX_W_0F385C_X86_64_P_1): Likewise. |
| (VEX_W_0F385E_X86_64_P_0): Likewise. |
| (VEX_W_0F385E_X86_64_P_1): Likewise. |
| (VEX_W_0F385E_X86_64_P_2): Likewise. |
| (VEX_W_0F385E_X86_64_P_3): Likewise. |
| (names_tmm): Likewise. |
| (att_names_tmm): Likewise. |
| (intel_operand_size): Handle void_mode. |
| (OP_XMM): Handle tmm_mode. |
| (OP_EX): Likewise. |
| (OP_VEX): Likewise. |
| * i386-gen.c (cpu_flag_init): Add entries for CpuAMX_INT8, |
| CpuAMX_BF16 and CpuAMX_TILE. |
| (operand_type_shorthands): Add RegTMM. |
| (operand_type_init): Likewise. |
| (operand_types): Add Tmmword. |
| (cpu_flag_init): Add CPU_AMX_INT8, CpuAMX_BF16 and CpuAMX_TILE. |
| (cpu_flags): Add CpuAMX_INT8, CpuAMX_BF16 and CpuAMX_TILE. |
| * i386-opc.h (CpuAMX_INT8): New. |
| (CpuAMX_BF16): Likewise. |
| (CpuAMX_TILE): Likewise. |
| (SIBMEM): Likewise. |
| (Tmmword): Likewise. |
| (i386_cpu_flags): Add cpuamx_int8, cpuamx_bf16 and cpuamx_tile. |
| (i386_opcode_modifier): Extend width of fields vexvvvv and sib. |
| (i386_operand_type): Add tmmword. |
| * i386-opc.tbl: Add AMX instructions. |
| * i386-reg.tbl: Add AMX registers. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2020-07-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_LWPCB_E, OP_LWP_E): Delete. |
| (REG_XOP_LWPCB, REG_XOP_LWP, REG_XOP_TBM_01, REG_XOP_TBM_02): |
| Rename to ... |
| (REG_0FXOP_09_12_M_1_L_0, REG_0FXOP_0A_12_L_0, |
| REG_0FXOP_09_01_L_0, REG_0FXOP_09_02_L_0): ... these |
| respectively. |
| (MOD_VEX_0FXOP_09_12, VEX_LEN_0FXOP_08_85, VEX_LEN_0FXOP_08_86, |
| VEX_LEN_0FXOP_08_87, VEX_LEN_0FXOP_08_8E, VEX_LEN_0FXOP_08_8F, |
| VEX_LEN_0FXOP_08_95, VEX_LEN_0FXOP_08_96, VEX_LEN_0FXOP_08_97, |
| VEX_LEN_0FXOP_08_9E, VEX_LEN_0FXOP_08_9F, VEX_LEN_0FXOP_08_A3, |
| VEX_LEN_0FXOP_08_A6, VEX_LEN_0FXOP_08_B6, VEX_LEN_0FXOP_08_C0, |
| VEX_LEN_0FXOP_08_C1, VEX_LEN_0FXOP_08_C2, VEX_LEN_0FXOP_08_C3, |
| VEX_LEN_0FXOP_09_01, VEX_LEN_0FXOP_09_02, VEX_LEN_0FXOP_09_12_M_1, |
| VEX_LEN_0FXOP_09_90, VEX_LEN_0FXOP_09_91, VEX_LEN_0FXOP_09_92, |
| VEX_LEN_0FXOP_09_93, VEX_LEN_0FXOP_09_94, VEX_LEN_0FXOP_09_95, |
| VEX_LEN_0FXOP_09_96, VEX_LEN_0FXOP_09_97, VEX_LEN_0FXOP_09_98, |
| VEX_LEN_0FXOP_09_99, VEX_LEN_0FXOP_09_9A, VEX_LEN_0FXOP_09_9B, |
| VEX_LEN_0FXOP_09_C1, VEX_LEN_0FXOP_09_C2, VEX_LEN_0FXOP_09_C3, |
| VEX_LEN_0FXOP_09_C6, VEX_LEN_0FXOP_09_C7, VEX_LEN_0FXOP_09_CB, |
| VEX_LEN_0FXOP_09_D1, VEX_LEN_0FXOP_09_D2, VEX_LEN_0FXOP_09_D3, |
| VEX_LEN_0FXOP_09_D6, VEX_LEN_0FXOP_09_D7, VEX_LEN_0FXOP_09_DB, |
| VEX_LEN_0FXOP_09_E1, VEX_LEN_0FXOP_09_E2, VEX_LEN_0FXOP_09_E3, |
| VEX_LEN_0FXOP_0A_12, VEX_W_0FXOP_08_85_L_0, |
| VEX_W_0FXOP_08_86_L_0, VEX_W_0FXOP_08_87_L_0, |
| VEX_W_0FXOP_08_8E_L_0, VEX_W_0FXOP_08_8F_L_0, |
| VEX_W_0FXOP_08_95_L_0, VEX_W_0FXOP_08_96_L_0, |
| VEX_W_0FXOP_08_97_L_0, VEX_W_0FXOP_08_9E_L_0, |
| VEX_W_0FXOP_08_9F_L_0, VEX_W_0FXOP_08_A6_L_0, |
| VEX_W_0FXOP_08_B6_L_0, VEX_W_0FXOP_08_C0_L_0, |
| VEX_W_0FXOP_08_C1_L_0, VEX_W_0FXOP_08_C2_L_0, |
| VEX_W_0FXOP_08_C3_L_0, VEX_W_0FXOP_08_CC_L_0, |
| VEX_W_0FXOP_08_CD_L_0, VEX_W_0FXOP_08_CE_L_0, |
| VEX_W_0FXOP_08_CF_L_0, VEX_W_0FXOP_08_EC_L_0, |
| VEX_W_0FXOP_08_ED_L_0, VEX_W_0FXOP_08_EE_L_0, |
| VEX_W_0FXOP_08_EF_L_0, VEX_W_0FXOP_09_C1_L_0, |
| VEX_W_0FXOP_09_C2_L_0, VEX_W_0FXOP_09_C3_L_0, |
| VEX_W_0FXOP_09_C6_L_0, VEX_W_0FXOP_09_C7_L_0, |
| VEX_W_0FXOP_09_CB_L_0, VEX_W_0FXOP_09_D1_L_0, |
| VEX_W_0FXOP_09_D2_L_0, VEX_W_0FXOP_09_D3_L_0, |
| VEX_W_0FXOP_09_D6_L_0, VEX_W_0FXOP_09_D7_L_0, |
| VEX_W_0FXOP_09_DB_L_0, VEX_W_0FXOP_09_E1_L_0, |
| VEX_W_0FXOP_09_E2_L_0, VEX_W_0FXOP_09_E3_L_0): New enumerators. |
| (reg_table): Re-order XOP entries. Adjust their operands. |
| (xop_table): Replace 08_85, 08_86, 08_87, 08_8E, 08_8F, 08_95, |
| 08_96, 08_97, 08_9E, 08_9F, 08_A3, 08_A6, 08_B6, 08_C0, 08_C1, |
| 08_C2, 08_C3, 09_01, 09_02, 09_12, 09_90, 09_91, 09_92, 09_93, |
| 09_94, 09_95, 09_96, 09_97, 09_98, 09_99, 09_9A, 09_9B, 09_C1, |
| 09_C2, 09_C3, 09_C6, 09_C7, 09_CB, 09_D1, 09_D2, 09_D3, 09_D6, |
| 09_D7, 09_DB, 09_E1, 09_E2, 09_E3, and VEX_LEN_0FXOP_0A_12 |
| entries by references ... |
| (vex_len_table): ... to resepctive new entries here. For several |
| new and existing entries reference ... |
| (vex_w_table): ... new entries here. |
| (mod_table): New MOD_VEX_0FXOP_09_12 entry. |
| |
| 2020-07-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (XMVexScalarI4): Define. |
| (VEX_LEN_0F3A6A_P_2, VEX_LEN_0F3A6B_P_2, VEX_LEN_0F3A6E_P_2, |
| VEX_LEN_0F3A6F_P_2, VEX_LEN_0F3A7A_P_2, VEX_LEN_0F3A7B_P_2, |
| VEX_LEN_0F3A7E_P_2, VEX_LEN_0F3A7F_P_2): Delete. |
| (vex_len_table): Move scalar FMA4 entries ... |
| (prefix_table): ... here. |
| (OP_REG_VexI4): Handle scalar_mode. |
| * i386-opc.tbl: Use VexLIG for scalar FMA4 insns. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-07-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_Vex_2src_1, OP_Vex_2src_2, Vex_2src_1, |
| Vex_2src_2): Delete. |
| (OP_VexW, VexW): New. |
| (xop_table): Use EXx for rotates by immediate. Use EXx and VexW |
| for shifts and rotates by register. |
| |
| 2020-07-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_EX_VexImmW, OP_XMM_VexW, EXVexImmW, XMVexW, |
| VEX_W_0F3A48_P_2, VEX_W_0F3A49_P_2, vex_w_done, get_vex_imm8, |
| OP_EX_VexReg): Delete. |
| (OP_VexI4, VexI4): New. |
| (vex_w_table): Move vpermil2ps and vpermil2pd entries ... |
| (prefix_table): ... here. |
| (print_insn): Drop setting of vex_w_done. |
| |
| 2020-07-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_EX_VexW, EXVexW, EXdVexW, EXqVexW): Delete. |
| (prefix_table, vex_len_table): Replace operands for FMA4 insns. |
| (xop_table): Replace operands of 4-operand insns. |
| (OP_REG_VexI4): Move VEX.W based operand swaping here. |
| |
| 2020-07-07 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * arc-opc.c (insert_rbd): New function. |
| (RBD): Define. |
| (RBDdup): Likewise. |
| * arc-tbl.h (vadd2, vadd4h, vmac2h, vmpy2h, vsub4h): Update |
| instructions. |
| |
| 2020-07-07 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (EVEX_W_0F3826_P_1, EVEX_W_0F3826_P_2, |
| EVEX_W_0F3828_P_1, EVEX_W_0F3829_P_1, EVEX_W_0F3854_P_2, |
| EVEX_W_0F3866_P_2, EVEX_W_0F3875_P_2, EVEX_W_0F387D_P_2, |
| EVEX_W_0F388D_P_2, EVEX_W_0F3A3E_P_2, EVEX_W_0F3A3F_P_2): |
| Delete. |
| (putop): Handle "BW". |
| * i386-dis-evex-w.h: Move entries for opcodes 0F3826, 0F3826, |
| 0F3828, 0F3829, 0F3854, 0F3866, 0F3875, 0F387D, 0F388D, 0F3A3E, |
| and 0F3A3F ... |
| * i386-dis-evex-prefix.h: ... here. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (VEX_LEN_0FXOP_09_80, VEX_LEN_0FXOP_09_81): Delete. |
| (VEX_LEN_0FXOP_09_82_W_0, VEX_LEN_0FXOP_09_83_W_0, |
| VEX_W_0FXOP_09_80, VEX_W_0FXOP_09_81, VEX_W_0FXOP_09_82, |
| VEX_W_0FXOP_09_83): New enumerators. |
| (xop_table): Reference the above. |
| (vex_len_table): Replace vfrczp* entries by vfrczs* ones. |
| (vex_w_table): New VEX_W_0FXOP_09_80, VEX_W_0FXOP_09_81, |
| VEX_W_0FXOP_09_82, and VEX_W_0FXOP_09_83 entries. |
| (get_valid_dis386): Return bad_opcode for XOP.PP != 0. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (EVEX_W_0F3838_P_1, |
| EVEX_W_0F3839_P_1, EVEX_W_0F3840_P_2, EVEX_W_0F3855_P_2, |
| EVEX_W_0F3868_P_3, EVEX_W_0F3871_P_2, EVEX_W_0F3873_P_2, |
| EVEX_W_0F3A50_P_2, EVEX_W_0F3A51_P_2, EVEX_W_0F3A56_P_2, |
| EVEX_W_0F3A57_P_2, EVEX_W_0F3A66_P_2, EVEX_W_0F3A67_P_2, |
| EVEX_W_0F3A71_P_2, EVEX_W_0F3A73_P_2): Delete. |
| (putop): Centralize management of last[]. Delete SAVE_LAST. |
| * i386-dis-evex-w.h: Move entries for opcodes 0F3838, 0F3839, |
| 0F3840, 0F3855, 0F3868, 0F3871, 0F3873, 0F3A50, 0F3A51, 0F3A56, |
| 0F3A57, 0F3A66, 0F3A67, 0F3A71, and 0F3A73 ... |
| * i386-dis-evex-prefix.h: here. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (MOD_EVEX_0F381A_P_2_W_0, MOD_EVEX_0F381A_P_2_W_1, |
| MOD_EVEX_0F381B_P_2_W_0, MOD_EVEX_0F381B_P_2_W_1, |
| MOD_EVEX_0F385A_P_2_W_0, MOD_EVEX_0F385A_P_2_W_1, |
| MOD_EVEX_0F385B_P_2_W_0, MOD_EVEX_0F385B_P_2_W_1): New |
| enumerators. |
| (EVEX_LEN_0F381A_P_2_W_0, EVEX_LEN_0F381A_P_2_W_1, |
| EVEX_LEN_0F381B_P_2_W_0, EVEX_LEN_0F381B_P_2_W_1, |
| EVEX_LEN_0F385A_P_2_W_0, EVEX_LEN_0F385A_P_2_W_1, |
| EVEX_LEN_0F385B_P_2_W_0, EVEX_LEN_0F385B_P_2_W_1): Rename to ... |
| (EVEX_LEN_0F381A_P_2_W_0_M_0, EVEX_LEN_0F381A_P_2_W_1_M_0, |
| EVEX_LEN_0F381B_P_2_W_0_M_0, EVEX_LEN_0F381B_P_2_W_1_M_0, |
| EVEX_LEN_0F385A_P_2_W_0_M_0, EVEX_LEN_0F385A_P_2_W_1_M_0, |
| EVEX_LEN_0F385B_P_2_W_0_M_0, EVEX_LEN_0F385B_P_2_W_1_M_0): ... |
| these, respectively. |
| * i386-dis-evex-len.h: Adjust comments. |
| * i386-dis-evex-mod.h: New MOD_EVEX_0F381A_P_2_W_0, |
| MOD_EVEX_0F381A_P_2_W_1, MOD_EVEX_0F381B_P_2_W_0, |
| MOD_EVEX_0F381B_P_2_W_1, MOD_EVEX_0F385A_P_2_W_0, |
| MOD_EVEX_0F385A_P_2_W_1, MOD_EVEX_0F385B_P_2_W_0, and |
| MOD_EVEX_0F385B_P_2_W_1 table entries. |
| * i386-dis-evex-w.h: Reference mod_table[] for |
| EVEX_W_0F381A_P_2, EVEX_W_0F381B_P_2, EVEX_W_0F385A_P_2, and |
| EVEX_W_0F385B_P_2. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis-evex-len.h (vbroadcastf32x8, vbroadcasti32x8, |
| vinsertf32x8, vinsertf64x4, vextractf32x8, vextractf64x4): Use |
| EXymm. |
| (vinserti32x8, vinserti64x4, vextracti32x8, vextracti64x4): |
| Likewise. Mark 256-bit entries invalid. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (PREFIX_EVEX_0F62, PREFIX_EVEX_0F6A, |
| PREFIX_EVEX_0F6B, PREFIX_EVEX_0F6C, PREFIX_EVEX_0F6D, |
| PREFIX_EVEX_0FD2, PREFIX_EVEX_0FD3, PREFIX_EVEX_0FD4, |
| PREFIX_EVEX_0FF2, PREFIX_EVEX_0FF3, PREFIX_EVEX_0FF4, |
| PREFIX_EVEX_0FFA, PREFIX_EVEX_0FFB, PREFIX_EVEX_0FFE, |
| PREFIX_EVEX_0F382B): Delete. |
| (EVEX_W_0F62_P_2, EVEX_W_0F6A_P_2, EVEX_W_0F6B_P_2, |
| EVEX_W_0F6C_P_2, EVEX_W_0F6D_P_2, EVEX_W_0FD2_P_2, |
| EVEX_W_0FD3_P_2, EVEX_W_0FD4_P_2, EVEX_W_0FF2_P_2, |
| EVEX_W_0FF3_P_2, EVEX_W_0FF4_P_2, EVEX_W_0FFA_P_2, |
| EVEX_W_0FFB_P_2, EVEX_W_0FFE_P_2, EVEX_W_0F382B_P_2): Rename |
| to ... |
| (EVEX_W_0F62, EVEX_W_0F6A, EVEX_W_0F6B, EVEX_W_0F6C, |
| EVEX_W_0F6D, EVEX_W_0FD2, EVEX_W_0FD3, EVEX_W_0FD4, |
| EVEX_W_0FF2, EVEX_W_0FF3, EVEX_W_0FF4, EVEX_W_0FFA, |
| EVEX_W_0FFB, EVEX_W_0FFE, EVEX_W_0F382B): ... these |
| respectively. |
| * i386-dis-evex.h (evex_table): Reference VEX_W table entries |
| for opcodes 0F62, 0F6A, 0F6B, 0F6C, 0F6D, 0FD2, 0FD3, 0FD4, |
| 0FF2, 0FF3, 0FF4, 0FFA, 0FFB, 0FFE, 0F382B. |
| * i386-dis-evex-prefix.h (PREFIX_EVEX_0F62, PREFIX_EVEX_0F6A, |
| PREFIX_EVEX_0F6B, PREFIX_EVEX_0F6C, PREFIX_EVEX_0F6D, |
| PREFIX_EVEX_0FD2, PREFIX_EVEX_0FD3, PREFIX_EVEX_0FD4, |
| PREFIX_EVEX_0FF2, PREFIX_EVEX_0FF3, PREFIX_EVEX_0FF4, |
| PREFIX_EVEX_0FFA, PREFIX_EVEX_0FFB, PREFIX_EVEX_0FFE, |
| PREFIX_EVEX_0F382B): Remove table entries. |
| * i386-dis-evex-w.h: Reference VEX table entries for opcodes |
| 0F62, 0F6A, 0F6B, 0F6C, 0F6D, 0FD2, 0FD3, 0FD4, 0FF2, 0FF3, |
| 0FF4, 0FFA, 0FFB, 0FFE, 0F382B. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (EVEX_LEN_0F3816_P_2, EVEX_LEN_0F3836_P_2, |
| EVEX_LEN_0F3A00_P_2_W_1, EVEX_LEN_0F3A01_P_2_W_1): New |
| enumerators. |
| * i386-dis-evex-len.h (evex_len_table): New EVEX_LEN_0F3816_P_2, |
| EVEX_LEN_0F3836_P_2, EVEX_LEN_0F3A00_P_2_W_1, and |
| EVEX_LEN_0F3A01_P_2_W_1 table entries. |
| * i386-dis-evex-prefix.h, i386-dis-evex-w.h: Reference the above |
| entries. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (EVEX_LEN_0FC4_P_2, EVEX_LEN_0FC5_P_2, |
| EVEX_LEN_0F3A14_P_2, EVEX_LEN_0F3A15_P_2, EVEX_LEN_0F3A16_P_2, |
| EVEX_LEN_0F3A17_P_2, EVEX_LEN_0F3A20_P_2, |
| EVEX_LEN_0F3A21_P_2_W_0, EVEX_LEN_0F3A22_P_2): New enumerators. |
| * i386-dis-evex-len.h (evex_len_table): New EVEX_LEN_0FC4_P_2, |
| EVEX_LEN_0FC5_P_2, EVEX_LEN_0F3A14_P_2, EVEX_LEN_0F3A15_P_2, |
| EVEX_LEN_0F3A16_P_2, EVEX_LEN_0F3A17_P_2, EVEX_LEN_0F3A20_P_2, |
| EVEX_LEN_0F3A21_P_2_W_0, and EVEX_LEN_0F3A22_P_2 table entries. |
| * i386-dis-evex-prefix.h, i386-dis-evex-w.h: Reference the above |
| entries. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (PREFIX_EVEX_0F3A1D, EVEX_W_0F3A1D_P_2): Delete. |
| (VEX_W_0F3813_P_2, VEX_W_0F3A1D_P_2): New enumerators. |
| (prefix_table): Reference VEX_W_0F3813_P_2 and VEX_W_0F3A1D_P_2 |
| respectively. |
| (vex_w_table): New VEX_W_0F3813_P_2 and VEX_W_0F3A1D_P_2 table |
| entries. |
| * i386-dis-evex.h (evex_table): Reference VEX table entry for |
| opcode 0F3A1D. |
| * i386-dis-evex-prefix.h (PREFIX_EVEX_0F3A1D): Delete table |
| entry. |
| * i386-dis-evex-w.h (EVEX_W_0F3A1D_P_2): Likewise. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (PREFIX_EVEX_0F60, PREFIX_EVEX_0F61, |
| PREFIX_EVEX_0F63, PREFIX_EVEX_0F67, PREFIX_EVEX_0F68, |
| PREFIX_EVEX_0F69, PREFIX_EVEX_0FD1, PREFIX_EVEX_0FD5, |
| PREFIX_EVEX_0FD8, PREFIX_EVEX_0FD9, PREFIX_EVEX_0FDA, |
| PREFIX_EVEX_0FDC, PREFIX_EVEX_0FDD, PREFIX_EVEX_0FDE, |
| PREFIX_EVEX_0FE0, PREFIX_EVEX_0FE1, PREFIX_EVEX_0FE3, |
| PREFIX_EVEX_0FE4, PREFIX_EVEX_0FE5, PREFIX_EVEX_0FE8, |
| PREFIX_EVEX_0FE9, PREFIX_EVEX_0FEA, PREFIX_EVEX_0FEC, |
| PREFIX_EVEX_0FED, PREFIX_EVEX_0FEE, PREFIX_EVEX_0FF1, |
| PREFIX_EVEX_0FF5, PREFIX_EVEX_0FF6, PREFIX_EVEX_0FF8, |
| PREFIX_EVEX_0FF9, PREFIX_EVEX_0FFC, PREFIX_EVEX_0FFD, |
| PREFIX_EVEX_0F3800, PREFIX_EVEX_0F3804, PREFIX_EVEX_0F380B, |
| PREFIX_EVEX_0F380C, PREFIX_EVEX_0F3818, PREFIX_EVEX_0F381C, |
| PREFIX_EVEX_0F381D, PREFIX_EVEX_0F383C, PREFIX_EVEX_0F383E, |
| PREFIX_EVEX_0F3858, PREFIX_EVEX_0F3878, PREFIX_EVEX_0F3879, |
| PREFIX_EVEX_0F3896, PREFIX_EVEX_0F3897, PREFIX_EVEX_0F3898, |
| PREFIX_EVEX_0F3899, PREFIX_EVEX_0F389C, PREFIX_EVEX_0F389D, |
| PREFIX_EVEX_0F389E, PREFIX_EVEX_0F389F, PREFIX_EVEX_0F38A6, |
| PREFIX_EVEX_0F38A7, PREFIX_EVEX_0F38A8, PREFIX_EVEX_0F38A9, |
| PREFIX_EVEX_0F38AC, PREFIX_EVEX_0F38AD, PREFIX_EVEX_0F38AE, |
| PREFIX_EVEX_0F38AF, PREFIX_EVEX_0F38B6, PREFIX_EVEX_0F38B7, |
| PREFIX_EVEX_0F38B8, PREFIX_EVEX_0F38B9, PREFIX_EVEX_0F38BA, |
| PREFIX_EVEX_0F38BB, PREFIX_EVEX_0F38BC, PREFIX_EVEX_0F38BD, |
| PREFIX_EVEX_0F38BE, PREFIX_EVEX_0F38BF, PREFIX_EVEX_0F38CF, |
| PREFIX_EVEX_0F38DC, PREFIX_EVEX_0F38DD, PREFIX_EVEX_0F38DE, |
| PREFIX_EVEX_0F38DF, PREFIX_EVEX_0F3A04, PREFIX_EVEX_0F3A0F, |
| PREFIX_EVEX_0F3A44, PREFIX_EVEX_0F3ACE, PREFIX_EVEX_0F3ACF, |
| EVEX_W_0F380C_P_2, EVEX_W_0F3818_P_2, EVEX_W_0F3858_P_2, |
| EVEX_W_0F3878_P_2, EVEX_W_0F3879_P_2, EVEX_W_0F3A04_P_2, |
| EVEX_W_0F3ACE_P_2, EVEX_W_0F3ACF_P_2): Delete. |
| (prefix_table): Add EXxEVexR to FMA table entries. |
| (OP_Rounding): Move abort() invocation. |
| * i386-dis-evex.h (evex_table): Reference VEX table for opcodes |
| 0F60, 0F61, 0F63, 0F67, 0F68, 0F69, 0FD1, 0FD5, 0FD8, 0FD9, |
| 0FDA, 0FDC, 0FDD, 0FDE, 0FE0, 0FE1, 0FE3, 0FE4, 0FE5, 0FE8, |
| 0FE9, 0FEA, 0FEC, 0FED, 0FEE, 0FF1, 0FF5, 0FF6, 0FF8, 0FF9, |
| 0FFC, 0FFD, 0F3800, 0F3804, 0F380B, 0F380C, 0F3818, 0F381C, |
| 0F381D, 0F383C, 0F383E, 0F3858, 0F3878, 0F3879, 0F3896, 0F3897, |
| 0F3898, 0F3899, 0F389C, 0F389D, 0F389E, 0F389F, 0F38A6, 0F38A7, |
| 0F38A8, 0F38A9, 0F38AC, 0F38AD, 0F38AE, 0F38AF, 0F38B6, 0F38B7, |
| 0F38B8, 0F38B9, 0F38BA, 0F38BB, 0F38BC, 0F38BD, 0F38BE, 0F38BF, |
| 0F38CF, 0F38DC, 0F38DD, 0F38DE, 0F38DF, 0F3A04, 0F3A0F, 0F3A44, |
| 0F3ACE, 0F3ACF. |
| * i386-dis-evex-prefix.h (PREFIX_EVEX_0F60, PREFIX_EVEX_0F61, |
| PREFIX_EVEX_0F63, PREFIX_EVEX_0F67, PREFIX_EVEX_0F68, |
| PREFIX_EVEX_0F69, PREFIX_EVEX_0FD1, PREFIX_EVEX_0FD5, |
| PREFIX_EVEX_0FD8, PREFIX_EVEX_0FD9, PREFIX_EVEX_0FDA, |
| PREFIX_EVEX_0FDC, PREFIX_EVEX_0FDD, PREFIX_EVEX_0FDE, |
| PREFIX_EVEX_0FE0, PREFIX_EVEX_0FE1, PREFIX_EVEX_0FE3, |
| PREFIX_EVEX_0FE4, PREFIX_EVEX_0FE5, PREFIX_EVEX_0FE8, |
| PREFIX_EVEX_0FE9, PREFIX_EVEX_0FEA, PREFIX_EVEX_0FEC, |
| PREFIX_EVEX_0FED, PREFIX_EVEX_0FEE, PREFIX_EVEX_0FF1, |
| PREFIX_EVEX_0FF5, PREFIX_EVEX_0FF6, PREFIX_EVEX_0FF8, |
| PREFIX_EVEX_0FF9, PREFIX_EVEX_0FFC, PREFIX_EVEX_0FFD, |
| PREFIX_EVEX_0F3800, PREFIX_EVEX_0F3804, PREFIX_EVEX_0F380B, |
| PREFIX_EVEX_0F380C, PREFIX_EVEX_0F3818, PREFIX_EVEX_0F381C, |
| PREFIX_EVEX_0F381D, PREFIX_EVEX_0F383C, PREFIX_EVEX_0F383E, |
| PREFIX_EVEX_0F3858, PREFIX_EVEX_0F3878, PREFIX_EVEX_0F3879, |
| PREFIX_EVEX_0F3896, PREFIX_EVEX_0F3897, PREFIX_EVEX_0F3898, |
| PREFIX_EVEX_0F3899, PREFIX_EVEX_0F389C, PREFIX_EVEX_0F389D, |
| PREFIX_EVEX_0F389E, PREFIX_EVEX_0F389F, PREFIX_EVEX_0F38A6, |
| PREFIX_EVEX_0F38A7, PREFIX_EVEX_0F38A8, PREFIX_EVEX_0F38A9, |
| PREFIX_EVEX_0F38AC, PREFIX_EVEX_0F38AD, PREFIX_EVEX_0F38AE, |
| PREFIX_EVEX_0F38AF, PREFIX_EVEX_0F38B6, PREFIX_EVEX_0F38B7, |
| PREFIX_EVEX_0F38B8, PREFIX_EVEX_0F38B9, PREFIX_EVEX_0F38BA, |
| PREFIX_EVEX_0F38BB, PREFIX_EVEX_0F38BC, PREFIX_EVEX_0F38BD, |
| PREFIX_EVEX_0F38BE, PREFIX_EVEX_0F38BF, PREFIX_EVEX_0F38CF, |
| PREFIX_EVEX_0F38DC, PREFIX_EVEX_0F38DD, PREFIX_EVEX_0F38DE, |
| PREFIX_EVEX_0F38DF, PREFIX_EVEX_0F3A04, PREFIX_EVEX_0F3A0F, |
| PREFIX_EVEX_0F3A44, PREFIX_EVEX_0F3ACE, PREFIX_EVEX_0F3ACF): |
| Delete table entries. |
| * i386-dis-evex-w.h (EVEX_W_0F380C_P_2, EVEX_W_0F3818_P_2, |
| EVEX_W_0F3858_P_2, EVEX_W_0F3878_P_2, EVEX_W_0F3879_P_2, |
| EVEX_W_0F3A04_P_2, EVEX_W_0F3ACE_P_2, EVEX_W_0F3ACF_P_2): |
| Likewise. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (EXqScalarS): Delete. |
| (vex_len_table): Replace EXqScalarS by EXqVexScalarS. |
| * i386-dis-evex-w.h (vmovq): Use EXqVexScalarS. |
| |
| 2020-07-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (safe-ctype.h): Include. |
| (EXdScalar, EXqScalar): Delete. |
| (d_scalar_mode, q_scalar_mode): Delete. |
| (prefix_table, vex_len_table): Use EXxmm_md in place of |
| EXdScalar and EXxmm_mq in place of EXqScalar. |
| (intel_operand_size, OP_E_memory, OP_EX): Remove uses of |
| d_scalar_mode and q_scalar_mode. |
| * i386-dis-evex-w.h (vmovss): Use EXxmm_md. |
| (vmovsd): Use EXxmm_mq. |
| |
| 2020-07-06 Yuri Chornoivan <yurchor@ukr.net> |
| |
| PR 26204 |
| * arc-dis.c: Fix spelling mistake. |
| * po/opcodes.pot: Regenerate. |
| |
| 2020-07-06 Nick Clifton <nickc@redhat.com> |
| |
| * po/pt_BR.po: Updated Brazilian Portugugese translation. |
| * po/uk.po: Updated Ukranian translation. |
| |
| 2020-07-04 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2020-07-04 Nick Clifton <nickc@redhat.com> |
| |
| Binutils 2.35 branch created. |
| |
| 2020-07-02 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (opcode_modifiers): Add VexSwapSources. |
| * i386-opc.h (VexSwapSources): New. |
| (i386_opcode_modifier): Add vexswapsources. |
| * i386-opc.tbl: Add VexSwapSources to BMI2 and BMI instructions |
| with two source operands swapped. |
| * i386-tbl.h: Regenerated. |
| |
| 2020-06-30 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-dis.c (print_insn_args, case 'E'): Updated. Let the |
| unprivileged CSR can also be initialized. |
| |
| 2020-06-29 Alan Modra <amodra@gmail.com> |
| |
| * arm-dis.c: Use C style comments. |
| * cr16-opc.c: Likewise. |
| * ft32-dis.c: Likewise. |
| * moxie-opc.c: Likewise. |
| * tic54x-dis.c: Likewise. |
| * s12z-opc.c: Remove useless comment. |
| * xgate-dis.c: Likewise. |
| |
| 2020-06-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.tbl: Add a blank line. |
| |
| 2020-06-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (opcode_modifiers): Replace VecSIB with SIB. |
| (VecSIB128): Renamed to ... |
| (VECSIB128): This. |
| (VecSIB256): Renamed to ... |
| (VECSIB256): This. |
| (VecSIB512): Renamed to ... |
| (VECSIB512): This. |
| (VecSIB): Renamed to ... |
| (SIB): This. |
| (i386_opcode_modifier): Replace vecsib with sib. |
| * i386-opc.tbl (VecSIB128): New. |
| (VecSIB256): Likewise. |
| (VecSIB512): Likewise. |
| Replace VecSIB=1, VecSIB=2 and VecSIB=3 with VecSIB128, VecSIB256 |
| and VecSIB512, respectively. |
| |
| 2020-06-26 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c: Adjust description of I macro. |
| (x86_64_table): Drop use of I. |
| (float_mem): Replace use of I. |
| (putop): Remove handling of I. Adjust setting/clearing of "alt". |
| |
| 2020-06-26 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c: (print_insn): Avoid straight assignment to |
| priv.orig_sizeflag when processing -M sub-options. |
| |
| 2020-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c: Adjust description of J macro. |
| (dis386, x86_64_table, mod_table): Replace J. |
| (putop): Remove handling of J. |
| |
| 2020-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c: (float_mem): Reduce alternatives for fstpt and fldpt. |
| |
| 2020-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c: Adjust description of "LQ" macro. |
| (dis386_twobyte): Use LQ for sysret. |
| (putop): Adjust handling of LQ. |
| |
| 2020-06-22 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c: Move the structures and functions to bfd/elfxx-riscv.c. |
| * riscv-dis.c: Include elfxx-riscv.h. |
| |
| 2020-06-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (prefix_table): Revert the last vmgexit change. |
| |
| 2020-06-17 Lili Cui <lili.cui@intel.com> |
| |
| * i386-dis.c (prefix_table): Delete the incorrect vmgexit. |
| |
| 2020-06-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/26115 |
| * i386-dis.c (prefix_table): Replace xsuspldtrk with xsusldtrk. |
| * i386-opc.tbl: Likewise. |
| * i386-tbl.h: Regenerated. |
| |
| 2020-06-12 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (priv_specs): Remove v1.9 and PRIV_SPEC_CLASS_1P9. |
| |
| 2020-06-11 Alex Coplan <alex.coplan@arm.com> |
| |
| * aarch64-opc.c (SYSREG): New macro for describing system registers. |
| (SR_CORE): Likewise. |
| (SR_FEAT): Likewise. |
| (SR_RNG): Likewise. |
| (SR_V8_1): Likewise. |
| (SR_V8_2): Likewise. |
| (SR_V8_3): Likewise. |
| (SR_V8_4): Likewise. |
| (SR_PAN): Likewise. |
| (SR_RAS): Likewise. |
| (SR_SSBS): Likewise. |
| (SR_SVE): Likewise. |
| (SR_ID_PFR2): Likewise. |
| (SR_PROFILE): Likewise. |
| (SR_MEMTAG): Likewise. |
| (SR_SCXTNUM): Likewise. |
| (aarch64_sys_regs): Refactor to store feature information in the table. |
| (aarch64_sys_reg_supported_p): Collapse logic for system registers |
| that now describe their own features. |
| (aarch64_pstatefield_supported_p): Likewise. |
| |
| 2020-06-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (prefix_table): Fix a typo in comments. |
| |
| 2020-06-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (rex_ignored): Delete. |
| (ckprefix): Drop rex_ignored initialization. |
| (get_valid_dis386): Drop setting of rex_ignored. |
| (print_insn): Drop checking of rex_ignored. Don't record data |
| size prefix as used with VEX-and-alike encodings. |
| |
| 2020-06-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (MOD_0F12_PREFIX_2, MOD_0F16_PREFIX_2, |
| MOD_VEX_0F12_PREFIX_2, MOD_VEX_0F16_PREFIX_2): New enumerators. |
| (VEX_LEN_0F12_P_2, VEX_LEN_0F16_P_2): Delete. |
| (VEX_LEN_0F12_P_2_M_0, VEX_LEN_0F16_P_2_M_0): Define. |
| (prefix_table): Decode MOD for cases 2 of opcodes 0F12, 0F16, |
| VEX_0F12, and VEX_0F16. |
| (vex_len_table): Use X for vmovlp* and vmovh*s. Drop |
| VEX_LEN_0F12_P_2 and VEX_LEN_0F16_P_2 entries. |
| (mod_table): Use X for movlpX and movhpX. Drop PREFIX_OPCODE |
| from movlps and movhlps. New MOD_0F12_PREFIX_2, |
| MOD_0F16_PREFIX_2, MOD_VEX_0F12_PREFIX_2, and |
| MOD_VEX_0F16_PREFIX_2 entries. |
| |
| 2020-06-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (MOD_EVEX_0F12_PREFIX_2, MOD_EVEX_0F13, |
| MOD_EVEX_0F16_PREFIX_2, MOD_EVEX_0F17, MOD_EVEX_0F2B): New enumerators. |
| (PREFIX_EVEX_0F13, PREFIX_EVEX_0F14, PREFIX_EVEX_0F15, |
| PREFIX_EVEX_0F17, PREFIX_EVEX_0F28, PREFIX_EVEX_0F29, |
| PREFIX_EVEX_0F2B, PREFIX_EVEX_0F54, PREFIX_EVEX_0F55, |
| PREFIX_EVEX_0F56, PREFIX_EVEX_0F57, PREFIX_EVEX_0FC6, |
| EVEX_W_0F10_P_0, EVEX_W_0F10_P_2, EVEX_W_0F11_P_0, |
| EVEX_W_0F11_P_2, EVEX_W_0F12_P_0_M_0, EVEX_W_0F12_P_2, |
| EVEX_W_0F13_P_0, EVEX_W_0F13_P_2, EVEX_W_0F14_P_0, |
| EVEX_W_0F14_P_2, EVEX_W_0F15_P_0, EVEX_W_0F15_P_2, |
| EVEX_W_0F16_P_0_M_0, EVEX_W_0F16_P_2, EVEX_W_0F17_P_0, |
| EVEX_W_0F17_P_2, EVEX_W_0F28_P_0, EVEX_W_0F28_P_2, |
| EVEX_W_0F29_P_0, EVEX_W_0F29_P_2, EVEX_W_0F2B_P_0, |
| EVEX_W_0F2B_P_2, EVEX_W_0F2E_P_0, EVEX_W_0F2E_P_2, |
| EVEX_W_0F2F_P_0, EVEX_W_0F2F_P_2, EVEX_W_0F51_P_0, |
| EVEX_W_0F51_P_2, EVEX_W_0F54_P_0, EVEX_W_0F54_P_2, |
| EVEX_W_0F55_P_0, EVEX_W_0F55_P_2, EVEX_W_0F56_P_0, |
| EVEX_W_0F56_P_2, EVEX_W_0F57_P_0, EVEX_W_0F57_P_2, |
| EVEX_W_0F58_P_0, EVEX_W_0F58_P_2, EVEX_W_0F59_P_0, |
| EVEX_W_0F59_P_2, EVEX_W_0F5C_P_0, EVEX_W_0F5C_P_2, |
| EVEX_W_0F5D_P_0, EVEX_W_0F5D_P_2, EVEX_W_0F5E_P_0, |
| EVEX_W_0F5E_P_2, EVEX_W_0F5F_P_0, EVEX_W_0F5F_P_2, |
| EVEX_W_0FC2_P_0, EVEX_W_0FC2_P_2, EVEX_W_0FC6_P_0, |
| EVEX_W_0FC6_P_2): Delete. |
| (print_insn): Add EVEX.W vs embedded prefix consistency check |
| to prefix validation. |
| * i386-dis-evex.h (evex_table): Don't further descend for |
| vunpcklpX, vunpckhpX, vmovapX, vandpX, vandnpX, vorpX, vxorpX, |
| and vshufpX. Continue with MOD decoding for opcodes 0F13, 0F17, |
| and 0F2B. |
| * i386-dis-evex-mod.h: Add/adjust vmovlpX/vmovhpX entries. |
| * i386-dis-evex-prefix.h: Don't further descend for vmovupX, |
| vucomisX, vcomisX, vsqrtpX, vaddpX, vmulpX, vsubpX, vminpX, |
| vdivpX, vmaxpX, and vcmppX. Continue with MOD decoding for cases |
| 2 of PREFIX_EVEX_0F12, PREFIX_EVEX_0F16, and PREFIX_EVEX_0F29. |
| Drop PREFIX_EVEX_0F13, PREFIX_EVEX_0F14, PREFIX_EVEX_0F15, |
| PREFIX_EVEX_0F17, PREFIX_EVEX_0F28, PREFIX_EVEX_0F2B, |
| PREFIX_EVEX_0F54, PREFIX_EVEX_0F55, PREFIX_EVEX_0F56, |
| PREFIX_EVEX_0F57, and PREFIX_EVEX_0FC6 entries. |
| * i386-dis-evex-w.h: Drop EVEX_W_0F10_P_0, EVEX_W_0F10_P_2, |
| EVEX_W_0F11_P_0, EVEX_W_0F11_P_2, EVEX_W_0F12_P_0_M_0, |
| EVEX_W_0F12_P_2, EVEX_W_0F12_P_3, EVEX_W_0F13_P_0, |
| EVEX_W_0F13_P_2, EVEX_W_0F14_P_0, EVEX_W_0F14_P_2, |
| EVEX_W_0F15_P_0, EVEX_W_0F15_P_2, EVEX_W_0F16_P_0_M_0, |
| EVEX_W_0F16_P_2, EVEX_W_0F17_P_0, EVEX_W_0F17_P_2, |
| EVEX_W_0F28_P_0, EVEX_W_0F28_P_2, EVEX_W_0F29_P_0, |
| EVEX_W_0F29_P_2, EVEX_W_0F2B_P_0, EVEX_W_0F2B_P_2, |
| EVEX_W_0F2E_P_0, EVEX_W_0F2E_P_2, EVEX_W_0F2F_P_0, |
| EVEX_W_0F2F_P_2, EVEX_W_0F51_P_0, EVEX_W_0F51_P_2, |
| EVEX_W_0F54_P_0, EVEX_W_0F54_P_2, EVEX_W_0F55_P_0, |
| EVEX_W_0F55_P_2, EVEX_W_0F56_P_0, EVEX_W_0F56_P_2, |
| EVEX_W_0F57_P_0, EVEX_W_0F57_P_2, EVEX_W_0F58_P_0, |
| EVEX_W_0F58_P_2, EVEX_W_0F59_P_0, EVEX_W_0F59_P_2, |
| EVEX_W_0F5C_P_0, EVEX_W_0F5C_P_2, EVEX_W_0F5D_P_0, |
| EVEX_W_0F5D_P_2, EVEX_W_0F5E_P_0, EVEX_W_0F5E_P_2, |
| EVEX_W_0F5F_P_0, EVEX_W_0F5F_P_2, EVEX_W_0FC2_P_0, |
| EVEX_W_0FC2_P_2, EVEX_W_0FC6_P_0, and EVEX_W_0FC6_P_2 entries. |
| |
| 2020-06-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (vex_table): Use PREFIX_OPCODE for vunpcklpX, |
| vunpckhpX, vmovapX, vandpX, vandnpX, vorpX, vxorpX and vshufpX. |
| (vex_len_table) : Likewise for vmovlpX, vmovhpX, vmovntpX, and |
| vmovmskpX. |
| (print_insn): Drop pointless check against bad_opcode. Split |
| prefix validation into legacy and VEX-and-alike parts. |
| (putop): Re-work 'X' macro handling. |
| |
| 2020-06-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (MOD_0F51): Rename to ... |
| (MOD_0F50): ... this. |
| |
| 2020-06-08 Alex Coplan <alex.coplan@arm.com> |
| |
| * arm-dis.c (arm_opcodes): Add dfb. |
| (thumb32_opcodes): Add dfb. |
| |
| 2020-06-08 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.h (reg_entry): Const-qualify reg_name field. |
| |
| 2020-06-06 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (ppc_opts): Accept -mpwr10/-Mpwr10. |
| |
| 2020-06-05 Alan Modra <amodra@gmail.com> |
| |
| * cgen-dis.c (hash_insn_array): Increase size of buf. Assert |
| size is large enough. |
| |
| 2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * disassemble.c (disassemble_init_for_target): Set endian_code for |
| bpf targets. |
| * bpf-desc.c: Regenerate. |
| * bpf-opc.c: Likewise. |
| * bpf-dis.c: Likewise. |
| |
| 2020-06-03 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * cgen-opc.c (cgen_get_insn_value): Get an `endian' argument. |
| (cgen_put_insn_value): Likewise. |
| (cgen_lookup_insn): Pass endianness to cgen_{get,put}_insn_value. |
| * cgen-dis.in (print_insn): Likewise. |
| * cgen-ibld.in (insert_1): Likewise. |
| (insert_1): Likewise. |
| (insert_insn_normal): Likewise. |
| (extract_1): Likewise. |
| * bpf-dis.c: Regenerate. |
| * bpf-ibld.c: Likewise. |
| * bpf-ibld.c: Likewise. |
| * cgen-dis.in: Likewise. |
| * cgen-ibld.in: Likewise. |
| * cgen-opc.c: Likewise. |
| * epiphany-dis.c: Likewise. |
| * epiphany-ibld.c: Likewise. |
| * fr30-dis.c: Likewise. |
| * fr30-ibld.c: Likewise. |
| * frv-dis.c: Likewise. |
| * frv-ibld.c: Likewise. |
| * ip2k-dis.c: Likewise. |
| * ip2k-ibld.c: Likewise. |
| * iq2000-dis.c: Likewise. |
| * iq2000-ibld.c: Likewise. |
| * lm32-dis.c: Likewise. |
| * lm32-ibld.c: Likewise. |
| * m32c-dis.c: Likewise. |
| * m32c-ibld.c: Likewise. |
| * m32r-dis.c: Likewise. |
| * m32r-ibld.c: Likewise. |
| * mep-dis.c: Likewise. |
| * mep-ibld.c: Likewise. |
| * mt-dis.c: Likewise. |
| * mt-ibld.c: Likewise. |
| * or1k-dis.c: Likewise. |
| * or1k-ibld.c: Likewise. |
| * xc16x-dis.c: Likewise. |
| * xc16x-ibld.c: Likewise. |
| * xstormy16-dis.c: Likewise. |
| * xstormy16-ibld.c: Likewise. |
| |
| 2020-06-04 Jose E. Marchesi <jemarch@gnu.org> |
| |
| * cgen-dis.in (cpu_desc_list): New field `insn_endian'. |
| (print_insn_): Handle instruction endian. |
| * bpf-dis.c: Regenerate. |
| * bpf-desc.c: Regenerate. |
| * epiphany-dis.c: Likewise. |
| * epiphany-desc.c: Likewise. |
| * fr30-dis.c: Likewise. |
| * fr30-desc.c: Likewise. |
| * frv-dis.c: Likewise. |
| * frv-desc.c: Likewise. |
| * ip2k-dis.c: Likewise. |
| * ip2k-desc.c: Likewise. |
| * iq2000-dis.c: Likewise. |
| * iq2000-desc.c: Likewise. |
| * lm32-dis.c: Likewise. |
| * lm32-desc.c: Likewise. |
| * m32c-dis.c: Likewise. |
| * m32c-desc.c: Likewise. |
| * m32r-dis.c: Likewise. |
| * m32r-desc.c: Likewise. |
| * mep-dis.c: Likewise. |
| * mep-desc.c: Likewise. |
| * mt-dis.c: Likewise. |
| * mt-desc.c: Likewise. |
| * or1k-dis.c: Likewise. |
| * or1k-desc.c: Likewise. |
| * xc16x-dis.c: Likewise. |
| * xc16x-desc.c: Likewise. |
| * xstormy16-dis.c: Likewise. |
| * xstormy16-desc.c: Likewise. |
| |
| 2020-06-03 Nick Clifton <nickc@redhat.com> |
| |
| * po/sr.po: Updated Serbian translation. |
| |
| 2020-06-03 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (riscv_get_isa_spec_class): Change bfd_boolean to int. |
| (riscv_get_priv_spec_class): Likewise. |
| |
| 2020-06-01 Alan Modra <amodra@gmail.com> |
| |
| * bpf-desc.c: Regenerate. |
| |
| 2020-05-28 Jose E. Marchesi <jose.marchesi@oracle.com> |
| David Faust <david.faust@oracle.com> |
| |
| * bpf-desc.c: Regenerate. |
| * bpf-opc.h: Likewise. |
| * bpf-opc.c: Likewise. |
| * bpf-dis.c: Likewise. |
| |
| 2020-05-28 Alan Modra <amodra@gmail.com> |
| |
| * nios2-dis.c (nios2_print_insn_arg): Avoid shift left of negative |
| values. |
| |
| 2020-05-28 Alan Modra <amodra@gmail.com> |
| |
| * ns32k-dis.c (print_insn_arg): Handle d value of 'f' for |
| immediates. |
| (print_insn_ns32k): Revert last change. |
| |
| 2020-05-28 Nick Clifton <nickc@redhat.com> |
| |
| * ns32k-dis.c (print_insn_ns32k): Change the arg_bufs array to |
| static. |
| |
| 2020-05-26 Sandra Loosemore <sandra@codesourcery.com> |
| |
| Fix extraction of signed constants in nios2 disassembler (again). |
| |
| * nios2-dis.c (nios2_print_insn_arg): Add explicit casts to |
| extractions of signed fields. |
| |
| 2020-05-26 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com> |
| |
| * s390-opc.txt: Relocate vector load/store instructions with |
| additional alignment parameter and change architecture level |
| constraint from z14 to z13. |
| |
| 2020-05-21 Alan Modra <amodra@gmail.com> |
| |
| * arc-ext.c: Replace "if (x) free (x)" with "free (x)" throughout. |
| * sparc-dis.c: Likewise. |
| * tic4x-dis.c: Likewise. |
| * xtensa-dis.c: Likewise. |
| * bpf-desc.c: Regenerate. |
| * epiphany-desc.c: Regenerate. |
| * fr30-desc.c: Regenerate. |
| * frv-desc.c: Regenerate. |
| * ip2k-desc.c: Regenerate. |
| * iq2000-desc.c: Regenerate. |
| * lm32-desc.c: Regenerate. |
| * m32c-desc.c: Regenerate. |
| * m32r-desc.c: Regenerate. |
| * mep-asm.c: Regenerate. |
| * mep-desc.c: Regenerate. |
| * mt-desc.c: Regenerate. |
| * or1k-desc.c: Regenerate. |
| * xc16x-desc.c: Regenerate. |
| * xstormy16-desc.c: Regenerate. |
| |
| 2020-05-20 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (riscv_ext_version_table): The table used to store |
| all information about the supported spec and the corresponding ISA |
| versions. Currently, only Zicsr is supported to verify the |
| correctness of Z sub extension settings. Others will be supported |
| in the future patches. |
| (struct isa_spec_t, isa_specs): List for all supported ISA spec |
| classes and the corresponding strings. |
| (riscv_get_isa_spec_class): New function. Get the corresponding ISA |
| spec class by giving a ISA spec string. |
| * riscv-opc.c (struct priv_spec_t): New structure. |
| (struct priv_spec_t priv_specs): List for all supported privilege spec |
| classes and the corresponding strings. |
| (riscv_get_priv_spec_class): New function. Get the corresponding |
| privilege spec class by giving a spec string. |
| (riscv_get_priv_spec_name): New function. Get the corresponding |
| privilege spec string by giving a CSR version class. |
| * riscv-dis.c: Updated since DECLARE_CSR is changed. |
| * riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR |
| according to the chosen version. Build a hash table riscv_csr_hash to |
| store the valid CSR for the chosen pirv verison. Dump the direct |
| CSR address rather than it's name if it is invalid. |
| (parse_riscv_dis_option_without_args): New function. Parse the options |
| without arguments. |
| (parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to |
| parse the options without arguments first, and then handle the options |
| with arguments. Add the new option -Mpriv-spec, which has argument. |
| * riscv-dis.c (print_riscv_disassembler_options): Add description |
| about the new OBJDUMP option. |
| |
| 2020-05-19 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (insert_ls, extract_ls): Handle 3-bit L fields and new |
| WC values on POWER10 sync, dcbf and wait instructions. |
| (insert_pl, extract_pl): New functions. |
| (L2OPT, LS, WC): Use insert_ls and extract_ls. |
| (LS3): New , 3-bit L for sync. |
| (LS3, L3OPT): New, 3-bit L for sync and dcbf. |
| (SC2, PL): New, 2-bit SC and PL for sync and wait. |
| (XWCPL_MASK, XL3RT_MASK, XSYNCLS_MASK): New instruction masks. |
| (XOPL3, XWCPL, XSYNCLS): New opcode macros. |
| (powerpc_opcodes) <dcbflp, dcbfps, dcbstps pause_short, phwsync, |
| plwsync, stcisync, stncisync, stsync, waitrsv>: New extended mnemonics. |
| <wait>: Enable PL operand on POWER10. |
| <dcbf>: Enable L3OPT operand on POWER10. |
| <sync>: Enable SC2 operand on POWER10. |
| |
| 2020-05-19 Stafford Horne <shorne@gmail.com> |
| |
| PR 25184 |
| * or1k-asm.c: Regenerate. |
| * or1k-desc.c: Regenerate. |
| * or1k-desc.h: Regenerate. |
| * or1k-dis.c: Regenerate. |
| * or1k-ibld.c: Regenerate. |
| * or1k-opc.c: Regenerate. |
| * or1k-opc.h: Regenerate. |
| * or1k-opinst.c: Regenerate. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc (powerpc_opcodes): Add xscmpeqqp, xscmpgeqp, xscmpgtqp, |
| xsmaxcqp, xsmincqp. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add lxvrbx, lxvrhx, lxvrwx, lxvrdx, |
| stxvrbx, stxvrhx, stxvrwx, stxvrdx. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add xvtlsbb. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add vstribl, vstribr, vstrihl, vstrihr, |
| vclrlb, vclrrb, vstribl., vstribr., vstrihl., vstrihr.. |
| |
| 2020-05-11 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes) <setbc, setbcr, setnbc, setnbcr>: New |
| mnemonics. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (UIM8, P_U8XX4_MASK): Define. |
| (powerpc_opcodes): Add vgnb, vcfuged, vpextd, vpdepd, vclzdm, |
| vctzdm, cntlzdm, pdepd, pextd, cfuged, cnttzdm. |
| (prefix_opcodes): Add xxeval. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add xxgenpcvbm, xxgenpcvhm, |
| xxgenpcvwm, xxgenpcvdm. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (MP, VXVAM_MASK): Define. |
| (VXVAPS_MASK): Use VXVA_MASK. |
| (powerpc_opcodes): Add mtvsrbmi, vexpandbm, vexpandhm, vexpandwm, |
| vexpanddm, vexpandqm, vextractbm, vextracthm, vextractwm, |
| vextractdm, vextractqm, mtvsrbm, mtvsrhm, mtvsrwm, mtvsrdm, mtvsrqm, |
| vcntmbb, vcntmbh, vcntmbw, vcntmbd. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (insert_xa6a, extract_xa6a, insert_xb6a, extract_xb6a): |
| New functions. |
| (powerpc_operands): Define ACC, PMSK8, PMSK4, PMSK2, XMSK, YMSK, |
| YMSK2, XA6a, XA6ap, XB6a entries. |
| (PMMIRR, P_X_MASK, P_XX1_MASK, P_GER_MASK): Define |
| (P_GER2_MASK, P_GER4_MASK, P_GER8_MASK, P_GER64_MASK): Define. |
| (PPCVSX4): Define. |
| (powerpc_opcodes): Add xxmfacc, xxmtacc, xxsetaccz, |
| xvi8ger4pp, xvi8ger4, xvf16ger2pp, xvf16ger2, xvf32gerpp, xvf32ger, |
| xvi4ger8pp, xvi4ger8, xvi16ger2spp, xvi16ger2s, xvbf16ger2pp, |
| xvbf16ger2, xvf64gerpp, xvf64ger, xvi16ger2, xvf16ger2np, |
| xvf32gernp, xvi8ger4spp, xvi16ger2pp, xvbf16ger2np, xvf64gernp, |
| xvf16ger2pn, xvf32gerpn, xvbf16ger2pn, xvf64gerpn, xvf16ger2nn, |
| xvf32gernn, xvbf16ger2nn, xvf64gernn, xvcvbf16sp, xvcvspbf16. |
| (prefix_opcodes): Add pmxvi8ger4pp, pmxvi8ger4, pmxvf16ger2pp, |
| pmxvf16ger2, pmxvf32gerpp, pmxvf32ger, pmxvi4ger8pp, pmxvi4ger8, |
| pmxvi16ger2spp, pmxvi16ger2s, pmxvbf16ger2pp, pmxvbf16ger2, |
| pmxvf64gerpp, pmxvf64ger, pmxvi16ger2, pmxvf16ger2np, pmxvf32gernp, |
| pmxvi8ger4spp, pmxvi16ger2pp, pmxvbf16ger2np, pmxvf64gernp, |
| pmxvf16ger2pn, pmxvf32gerpn, pmxvbf16ger2pn, pmxvf64gerpn, |
| pmxvf16ger2nn, pmxvf32gernn, pmxvbf16ger2nn, pmxvf64gernn. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (insert_imm32, extract_imm32): New functions. |
| (insert_xts, extract_xts): New functions. |
| (IMM32, UIM3, IX, UIM5, SH3, XTS, P8RR): Define. |
| (P_XX4_MASK, P_UXX4_MASK, VSOP, P_VS_MASK, P_VSI_MASK): Define. |
| (VXRC_MASK, VXSH_MASK): Define. |
| (powerpc_opcodes): Add vinsbvlx, vsldbi, vextdubvlx, vextdubvrx, |
| vextduhvlx, vextduhvrx, vextduwvlx, vextduwvrx, vextddvlx, |
| vextddvrx, vinshvlx, vinswvlx, vinsw, vinsbvrx, vinshvrx, |
| vinswvrx, vinsd, vinsblx, vsrdbi, vinshlx, vinswlx, vinsdlx, |
| vinsbrx, vinshrx, vinswrx, vinsdrx, lxvkq. |
| (prefix_opcodes): Add xxsplti32dx, xxspltidp, xxspltiw, xxblendvb, |
| xxblendvh, xxblendvw, xxblendvd, xxpermx. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add vrlq, vdivuq, vmsumcud, vrlqmi, |
| vmuloud, vcmpuq, vslq, vdivsq, vcmpsq, vrlqnm, vcmpequq, vmulosd, |
| vsrq, vdiveuq, vcmpgtuq, vmuleud, vsraq, vdivesq, vcmpgtsq, vmulesd, |
| vcmpequq., vextsd2q, vmoduq, vcmpgtuq., vmodsq, vcmpgtsq., xscvqpuqz, |
| xscvuqqp, xscvqpsqz, xscvsqqp, dcffixqq, dctfixqq. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (insert_xtp, extract_xtp): New functions. |
| (XTP, DQXP, DQXP_MASK): Define. |
| (powerpc_opcodes): Add lxvp, stxvp, lxvpx, stxvpx. |
| (prefix_opcodes): Add plxvp and pstxvp. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add vdivuw, vdivud, vdivsw, vmulld, |
| vdivsd, vmulhuw, vdiveuw, vmulhud, vdiveud, vmulhsw, vdivesw, |
| vmulhsd, vdivesd, vmoduw, vmodud, vmodsw, vmodsd. |
| |
| 2020-05-11 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes) <brd, brh, brw>: New mnemonics. |
| |
| 2020-05-11 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (insert_l1opt, extract_l1opt): New functions. |
| (L1OPT): Define. |
| (powerpc_opcodes) <paste.>: Add L operand for cpu POWER10. |
| |
| 2020-05-11 Peter Bergner <bergner@linux.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes) <slbiag>: Add variant with L operand. |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (powerpc_init_dialect): Default to "power10". |
| |
| 2020-05-11 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (ppc_opts): Add "power10" entry. |
| (print_insn_powerpc): Update for PPC_OPCODE_POWER10 renaming. |
| * ppc-opc.c (POWER10): Rename from POWERXX. Update all uses. |
| |
| 2020-05-11 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po: Updated French translation. |
| |
| 2020-04-30 Alex Coplan <alex.coplan@arm.com> |
| |
| * aarch64-opc.h (enum aarch64_field_kind): Add FLD_imm16_2. |
| * aarch64-opc.c (fields): Add entry for FLD_imm16_2. |
| (operand_general_constraint_met_p): validate |
| AARCH64_OPND_UNDEFINED. |
| * aarch64-tbl.h (aarch64_opcode_table): Add udf instruction, entry |
| for FLD_imm16_2. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2020-04-29 Nick Clifton <nickc@redhat.com> |
| |
| PR 22699 |
| * sh-opc.h: Also use unsigned 8-bit immediate values for the LDRC |
| and SETRC insns. |
| |
| 2020-04-29 Nick Clifton <nickc@redhat.com> |
| |
| * po/sv.po: Updated Swedish translation. |
| |
| 2020-04-29 Nick Clifton <nickc@redhat.com> |
| |
| PR 22699 |
| * sh-opc.h (IMM0_8): Replace with IMM0_8S and IMM0_8U. Use |
| IMM0_8S for arithmetic insns and IMM0_8U for logical insns. |
| * sh-dis.c (print_insn_sh): Change IMM0_8 case to IMM0_8S and add |
| IMM0_8U case. |
| |
| 2020-04-21 Andreas Schwab <schwab@linux-m68k.org> |
| |
| PR 25848 |
| * m68k-opc.c (m68k_opcodes): Allow pc-rel for second operand of |
| cmpi only on m68020up and cpu32. |
| |
| 2020-04-20 Sudakshina Das <sudi.das@arm.com> |
| |
| * aarch64-asm.c (aarch64_ins_none): New. |
| * aarch64-asm.h (ins_none): New declaration. |
| * aarch64-dis.c (aarch64_ext_none): New. |
| * aarch64-dis.h (ext_none): New declaration. |
| * aarch64-opc.c (aarch64_print_operand): Update case for |
| AARCH64_OPND_BARRIER_PSB. |
| * aarch64-tbl.h (aarch64_opcode_table): Add tsb. |
| (AARCH64_OPERANDS): Update inserter/extracter for |
| AARCH64_OPND_BARRIER_PSB to use new dummy functions. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2020-04-20 Sudakshina Das <sudi.das@arm.com> |
| |
| * aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): Remove. |
| (aarch64_feature_ras, RAS): Likewise. |
| (aarch64_feature_stat_profile, STAT_PROFILE): Likewise. |
| (aarch64_opcode_table): Update bti, xpaclri, pacia1716, pacib1716, |
| autia1716, autib1716, esb, psb, dgh, paciaz, paciasp, pacibz, pacibsp, |
| autiaz, autiasp, autibz, autibsp to be CORE_INSN. |
| * aarch64-asm-2.c: Regenerated. |
| * aarch64-dis-2.c: Regenerated. |
| * aarch64-opc-2.c: Regenerated. |
| |
| 2020-04-17 Fredrik Strupe <fredrik@strupe.net> |
| |
| * arm-dis.c (neon_opcodes): Fix VDUP instruction masks. |
| (print_insn_neon): Support disassembly of conditional |
| instructions. |
| |
| 2020-02-16 David Faust <david.faust@oracle.com> |
| |
| * bpf-desc.c: Regenerate. |
| * bpf-desc.h: Likewise. |
| * bpf-opc.c: Regenerate. |
| * bpf-opc.h: Likewise. |
| |
| 2020-04-07 Lili Cui <lili.cui@intel.com> |
| |
| * i386-dis.c (enum): Add PREFIX_0F01_REG_5_MOD_3_RM_1, |
| (prefix_table): New instructions (see prefixes above). |
| (rm_table): Likewise |
| * i386-gen.c (cpu_flag_init): Add CPU_TSXLDTRK_FLAGS, |
| CPU_ANY_TSXLDTRK_FLAGS. |
| (cpu_flags): Add CpuTSXLDTRK. |
| * i386-opc.h (enum): Add CpuTSXLDTRK. |
| (i386_cpu_flags): Add cputsxldtrk. |
| * i386-opc.tbl: Add XSUSPLDTRK insns. |
| * i386-init.h: Regenerate. |
| * i386-tbl.h: Likewise. |
| |
| 2020-04-02 Lili Cui <lili.cui@intel.com> |
| |
| * i386-dis.c (prefix_table): New instructions serialize. |
| * i386-gen.c (cpu_flag_init): Add CPU_SERIALIZE_FLAGS, |
| CPU_ANY_SERIALIZE_FLAGS. |
| (cpu_flags): Add CpuSERIALIZE. |
| * i386-opc.h (enum): Add CpuSERIALIZE. |
| (i386_cpu_flags): Add cpuserialize. |
| * i386-opc.tbl: Add SERIALIZE insns. |
| * i386-init.h: Regenerate. |
| * i386-tbl.h: Likewise. |
| |
| 2020-03-26 Alan Modra <amodra@gmail.com> |
| |
| * disassemble.h (opcodes_assert): Declare. |
| (OPCODES_ASSERT): Define. |
| * disassemble.c: Don't include assert.h. Include opintl.h. |
| (opcodes_assert): New function. |
| * h8300-dis.c (bfd_h8_disassemble_init): Use OPCODES_ASSERT. |
| (bfd_h8_disassemble): Reduce size of data array. Correctly |
| calculate maxlen. Omit insn decoding when insn length exceeds |
| maxlen. Exit from nibble loop when looking for E, before |
| accessing next data byte. Move processing of E outside loop. |
| Replace tests of maxlen in loop with assertions. |
| |
| 2020-03-26 Alan Modra <amodra@gmail.com> |
| |
| * arc-dis.c (find_format): Init needs_limm. Simplify use of limm. |
| |
| 2020-03-25 Alan Modra <amodra@gmail.com> |
| |
| * z80-dis.c (suffix): Init mybuf. |
| |
| 2020-03-22 Alan Modra <amodra@gmail.com> |
| |
| * h8300-dis.c (bfd_h8_disassemble): Limit data[] access to that |
| successflly read from section. |
| |
| 2020-03-22 Alan Modra <amodra@gmail.com> |
| |
| * arc-dis.c (find_format): Use ISO C string concatenation rather |
| than line continuation within a string. Don't access needs_limm |
| before testing opcode != NULL. |
| |
| 2020-03-22 Alan Modra <amodra@gmail.com> |
| |
| * ns32k-dis.c (print_insn_arg): Update comment. |
| (print_insn_ns32k): Reduce size of index_offset array, and |
| initialize, passing -1 to print_insn_arg for args that are not |
| an index. Don't exit arg loop early. Abort on bad arg number. |
| |
| 2020-03-22 Alan Modra <amodra@gmail.com> |
| |
| * s12z-dis.c (abstract_read_memory): Don't print error on EOI. |
| * s12z-opc.c: Formatting. |
| (operands_f): Return an int. |
| (opr_n_bytes_p1): Return -1 on reaching buffer memory limit. |
| (opr_n_bytes2, bfextins_n_bytes, mul_n_bytes, bm_n_bytes), |
| (shift_n_bytes, mov_imm_opr_n_bytes, loop_prim_n_bytes), |
| (exg_sex_discrim): Likewise. |
| (create_immediate_operand, create_bitfield_operand), |
| (create_register_operand_with_size, create_register_all_operand), |
| (create_register_all16_operand, create_simple_memory_operand), |
| (create_memory_operand, create_memory_auto_operand): Don't |
| segfault on malloc failure. |
| (z_ext24_decode): Return an int status, negative on fail, zero |
| on success. |
| (x_imm1, imm1_decode, trap_decode, z_opr_decode, z_opr_decode2), |
| (imm1234, reg_s_imm, reg_s_opr, z_imm1234_8base, z_imm1234_0base), |
| (z_tfr, z_reg, reg_xy, lea_reg_xys_opr, lea_reg_xys, rel_15_7), |
| (decode_rel_15_7, cmp_xy, sub_d6_x_y, sub_d6_y_x), |
| (ld_18bit_decode, mul_decode, bm_decode, bm_rel_decode), |
| (mov_imm_opr, ld_18bit_decode, exg_sex_decode), |
| (loop_primitive_decode, shift_decode, psh_pul_decode), |
| (bit_field_decode): Similarly. |
| (z_decode_signed_value, decode_signed_value): Similarly. Add arg |
| to return value, update callers. |
| (x_opr_decode_with_size): Check all reads, returning NULL on fail. |
| Don't segfault on NULL operand. |
| (decode_operation): Return OP_INVALID on first fail. |
| (decode_s12z): Check all reads, returning -1 on fail. |
| |
| 2020-03-20 Alan Modra <amodra@gmail.com> |
| |
| * metag-dis.c (print_insn_metag): Don't ignore status from |
| read_memory_func. |
| |
| 2020-03-20 Alan Modra <amodra@gmail.com> |
| |
| * nds32-dis.c (print_insn_nds32): Remove unnecessary casts. |
| Initialize parts of buffer not written when handling a possible |
| 2-byte insn at end of section. Don't attempt decoding of such |
| an insn by the 4-byte machinery. |
| |
| 2020-03-20 Alan Modra <amodra@gmail.com> |
| |
| * ppc-dis.c (print_insn_powerpc): Only clear needed bytes of |
| partially filled buffer. Prevent lookup of 4-byte insns when |
| only VLE 2-byte insns are possible due to section size. Print |
| ".word" rather than ".long" for 2-byte leftovers. |
| |
| 2020-03-17 Sergey Belyashov <sergey.belyashov@gmail.com> |
| |
| PR 25641 |
| * z80-dis.c: Fix disassembling ED+A4/AC/B4/BC opcodes. |
| |
| 2020-03-13 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (X86_64_0D): Rename to ... |
| (X86_64_0E): ... this. |
| |
| 2020-03-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am ($(srcdir)/i386-init.h): Also pass -P to $(CPP). |
| * Makefile.in: Regenerated. |
| |
| 2020-03-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (avx_irel): New. Use is for AVX512 vpcmp* |
| 3-operand pseudos. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (xop_elem, xop_irel, xop_sign): New. Use them for XOP vpcom*, |
| vprot*, vpsha*, and vpshl*. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (avx_frel): New. Use it for AVX/AVX512 vcmpps, |
| vcmpss, vcmppd, and vcmpsd 3-operand pseudo-ops. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (set_bitfield): Ignore zero-length field names. |
| * i386-opc.tbl (sse_frel): New. Use it for SSE/SSE2 cmpps, |
| cmpss, cmppd, and cmpsd 2-operand pseudo-ops. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (struct template_arg, struct template_instance, |
| struct template_param, struct template, templates, |
| parse_template, expand_templates): New. |
| (process_i386_opcodes): Various local variables moved to |
| expand_templates. Call parse_template and expand_templates. |
| * i386-opc.tbl (cc): New. Use it for Jcc, SETcc, and CMOVcc. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (vcvtdq2pd, vcvtps2pd, vcvtudq2pd, vcvtps2ph, |
| vcvtps2qq, vcvtps2uqq, vcvttps2qq, vcvttps2uqq): Fold separate |
| register and memory source templates. Replace VexW= by VexW* |
| where applicable. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl: Drop IgnoreSize from various SIMD insns. Replace |
| VexW= by VexW* and VexVVVV=1 by just VexVVVV where applicable. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (fildll, fistpll, fisttpll): Add ATTSyntax. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (movq): Drop NoRex64 from XMM/XMM SSE2AVX variants. |
| (movmskps, pextrw, pinsrw, pmovmskb, movmskpd, extractps, |
| pextrb, pinsrb, roundsd): Drop NoRex64 and where applicable use |
| VexW0 on SSE2AVX variants. |
| (vmovq): Drop NoRex64 from XMM/XMM variants. |
| (vextractps, vmovmskpd, vmovmskps, vpextrb, vpextrw, vpinsrb, |
| vpinsrw, vpmovmskb, vroundsd, vpmovmskb): Drop NoRex64 and where |
| applicable use VexW0. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (opcode_modifiers): Remove Rex64 field. |
| * i386-opc.h (Rex64): Delete. |
| (struct i386_opcode_modifier): Remove rex64 field. |
| * i386-opc.tbl (crc32): Drop Rex64. |
| Replace Rex64 with Size64 everywhere else. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (OP_E_memory): Exclude recording of used address |
| prefix for "bnd" modes only in 64-bit mode. Don't decode 16-bit |
| addressed memory operands for MPX insns. |
| |
| 2020-03-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (movmskps, mwait, vmread, vmwrite, invept, |
| invvpid, invpcid, rdfsbase, rdgsbase, wrfsbase, wrgsbase, adcx, |
| adox, mwaitx, rdpid, movdiri): Add IgnoreSize. |
| (ptwrite): Split into non-64-bit and 64-bit forms. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-06 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (tpause, umwait): Add IgnoreSize. Add 3-operand |
| template. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-03-04 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (PREFIX_0F01_REG_3_RM_1): New. |
| (prefix_table): Move vmmcall here. Add vmgexit. |
| (rm_table): Replace vmmcall entry by prefix_table[] escape. |
| * i386-gen.c (cpu_flag_init): Add CPU_SEV_ES_FLAGS entry. |
| (cpu_flags): Add CpuSEV_ES entry. |
| * i386-opc.h (CpuSEV_ES): New. |
| (union i386_cpu_flags): Add cpusev_es field. |
| * i386-opc.tbl (vmgexit): New. |
| * i386-init.h, i386-tbl.h: Re-generate. |
| |
| 2020-03-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (opcode_modifiers): Replace IgnoreSize/DefaultSize |
| with MnemonicSize. |
| * i386-opc.h (IGNORESIZE): New. |
| (DEFAULTSIZE): Likewise. |
| (IgnoreSize): Removed. |
| (DefaultSize): Likewise. |
| (MnemonicSize): New. |
| (i386_opcode_modifier): Replace ignoresize/defaultsize with |
| mnemonicsize. |
| * i386-opc.tbl (IgnoreSize): New. |
| (DefaultSize): Likewise. |
| * i386-tbl.h: Regenerated. |
| |
| 2020-03-03 Sergey Belyashov <sergey.belyashov@gmail.com> |
| |
| PR 25627 |
| * z80-dis.c: Fix disassembly of LD IY,(HL) and D (HL),IX |
| instructions. |
| |
| 2020-03-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/25622 |
| * i386-opc.tbl: Add IgnoreSize to cvtsi2sd, cvtsi2ss, vcvtsi2sd, |
| vcvtsi2ss, vcvtusi2sd and vcvtusi2ss for AT&T syntax. |
| * i386-tbl.h: Regenerated. |
| |
| 2020-02-26 Alan Modra <amodra@gmail.com> |
| |
| * aarch64-asm.c: Indent labels correctly. |
| * aarch64-dis.c: Likewise. |
| * aarch64-gen.c: Likewise. |
| * aarch64-opc.c: Likewise. |
| * alpha-dis.c: Likewise. |
| * i386-dis.c: Likewise. |
| * nds32-asm.c: Likewise. |
| * nfp-dis.c: Likewise. |
| * visium-dis.c: Likewise. |
| |
| 2020-02-25 Claudiu Zissulescu <claziss@gmail.com> |
| |
| * arc-regs.h (int_vector_base): Make it available for all ARC |
| CPUs. |
| |
| 2020-02-20 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-dis.c (print_insn_args): Updated since the DECLARE_CSR is |
| changed. |
| |
| 2020-02-19 Nelson Chu <nelson.chu@sifive.com> |
| |
| * riscv-opc.c (riscv_opcodes): Convert add/addi to the compressed |
| c.mv/c.li if rs1 is zero. |
| |
| 2020-02-17 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (cpu_flag_init): Replace CpuABM with |
| CpuLZCNT|CpuPOPCNT. Add CpuPOPCNT to CPU_SSE4_2_FLAGS. Add |
| CPU_POPCNT_FLAGS. |
| (cpu_flags): Remove CpuABM. Add CpuPOPCNT. |
| * i386-opc.h (CpuABM): Removed. |
| (CpuPOPCNT): New. |
| (i386_cpu_flags): Remove cpuabm. Add cpupopcnt. |
| * i386-opc.tbl: Replace CpuABM|CpuSSE4_2 with CpuPOPCNT on |
| popcnt. Remove CpuABM from lzcnt. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2020-02-17 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (vcvtsi2sd, vcvtsi2ss, vcvtusi2sd, vcvtusi2ss): |
| Fold CpuNo64 and Cpu64 templates. Use VexLIG/EVexLIG and VexW0/ |
| VexW1 instead of open-coding them. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-02-17 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (AddrPrefixOpReg): Define. |
| (monitor, invlpga, vmload, vmrun, vmsave, clzero, monitorx, |
| umonitor, movdir64b, enqcmd, enqcmds): Fold Cpu64 and CpuNo64 |
| templates. Drop NoRex64. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-02-17 Jan Beulich <jbeulich@suse.com> |
| |
| PR gas/6518 |
| * i386-opc.tbl (vcvtpd2dq, vcvtpd2ps, vcvttpd2dq, vcvtpd2udq, |
| vcvttpd2udq, vcvtqq2ps, vcvtuqq2ps): Split XMM/YMM source forms |
| into Intel syntax instance (with Unpsecified) and AT&T one |
| (without). |
| (vcvtneps2bf16): Likewise, along with folding the two so far |
| separate ones. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-02-16 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (cpu_flag_init): Remove CPU_ANY_SSE3_FLAGS from |
| CPU_ANY_SSE4A_FLAGS. |
| |
| 2020-02-17 Alan Modra <amodra@gmail.com> |
| |
| * i386-gen.c (cpu_flag_init): Correct last change. |
| |
| 2020-02-16 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (cpu_flag_init): Add CPU_ANY_SSE4A_FLAGS. Remove |
| CPU_ANY_SSE4_FLAGS. |
| |
| 2020-02-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.tbl (movsx): Remove Intel syntax comments. |
| (movzx): Likewise. |
| |
| 2020-02-14 Jan Beulich <jbeulich@suse.com> |
| |
| PR gas/25438 |
| * i386-opc.tbl (movsx): Fold patterns. Also allow Reg32 as |
| destination for Cpu64-only variant. |
| (movzx): Fold patterns. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-02-13 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (cpu_flag_init): Move CpuSSE4a from |
| CPU_ANY_SSE_FLAGS entry to CPU_ANY_SSE3_FLAGS one. Add |
| CPU_ANY_SSE4_FLAGS entry. |
| * i386-init.h: Re-generate. |
| |
| 2020-02-12 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (vfpclasspd, vfpclassps): Add Intel sytax form |
| with Unspecified, making the present one AT&T syntax only. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-02-12 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (jmp): Fold CpuNo64 and Amd64 direct variants. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-02-12 Jan Beulich <jbeulich@suse.com> |
| |
| PR gas/24546 |
| * i386-dis.c (putop): Handle REX.W in '^' case for Intel64 mode. |
| * i386-opc.tbl (lfs, lgs, lss, lcall, ljmp): Split into |
| Amd64 and Intel64 templates. |
| (call, jmp): Likewise for far indirect variants. Dro |
| Unspecified. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-02-11 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-gen.c (opcode_modifiers): Remove ShortForm entry. |
| * i386-opc.h (ShortForm): Delete. |
| (struct i386_opcode_modifier): Remove shortform field. |
| * i386-opc.tbl (mov, movabs, push, pop, xchg, inc, dec, fld, |
| fst, fstp, fxch, fcom, fcomp, fucom, fucomp, fadd, faddp, fsub, |
| fsubp, fsubr, fsubrp, fmul, fmulp, fdiv, fdivp, fdivr, fdivrp, |
| ffreep, bswap, fcmov*, fcomi, fcomip, fucomi, fucomip, movq): |
| Drop ShortForm. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-02-11 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (fcomi, fucomi, fcomip, fcompi, fucomip, |
| fucompi): Drop ShortForm from operand-less templates. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-02-11 Alan Modra <amodra@gmail.com> |
| |
| * cgen-ibld.in (extract_normal): Set *valuep on all return paths. |
| * bpf-ibld.c, * epiphany-ibld.c, * fr30-ibld.c, * frv-ibld.c, |
| * ip2k-ibld.c, * iq2000-ibld.c, * lm32-ibld.c, * m32c-ibld.c, |
| * m32r-ibld.c, * mep-ibld.c, * mt-ibld.c, * or1k-ibld.c, |
| * xc16x-ibld.c, * xstormy16-ibld.c: Regenerate. |
| |
| 2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * arm-dis.c (print_insn_cde): Define 'V' parse character. |
| (cde_opcodes): Add VCX* instructions. |
| |
| 2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com> |
| Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * arm-dis.c (struct cdeopcode32): New. |
| (CDE_OPCODE): New macro. |
| (cde_opcodes): New disassembly table. |
| (regnames): New option to table. |
| (cde_coprocs): New global variable. |
| (print_insn_cde): New |
| (print_insn_thumb32): Use print_insn_cde. |
| (parse_arm_disassembler_options): Parse coprocN args. |
| |
| 2020-02-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/25516 |
| * i386-gen.c (opcode_modifiers): Replace AMD64 and Intel64 |
| with ISA64. |
| * i386-opc.h (AMD64): Removed. |
| (Intel64): Likewose. |
| (AMD64): New. |
| (INTEL64): Likewise. |
| (INTEL64ONLY): Likewise. |
| (i386_opcode_modifier): Replace amd64 and intel64 with isa64. |
| * i386-opc.tbl (Amd64): New. |
| (Intel64): Likewise. |
| (Intel64Only): Likewise. |
| Replace AMD64 with Amd64. Update sysenter/sysenter with |
| Cpu64 and Intel64Only. Remove AMD64 from sysenter/sysenter. |
| * i386-tbl.h: Regenerated. |
| |
| 2020-02-07 Sergey Belyashov <sergey.belyashov@gmail.com> |
| |
| PR 25469 |
| * z80-dis.c: Add support for GBZ80 opcodes. |
| |
| 2020-02-04 Alan Modra <amodra@gmail.com> |
| |
| * d30v-dis.c (print_insn): Make "val" and "opnum" unsigned. |
| |
| 2020-02-03 Alan Modra <amodra@gmail.com> |
| |
| * m32c-ibld.c: Regenerate. |
| |
| 2020-02-01 Alan Modra <amodra@gmail.com> |
| |
| * frv-ibld.c: Regenerate. |
| |
| 2020-01-31 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (EXxmm_mdq, xmm_mdq_mode): Delete. |
| (intel_operand_size, OP_EX): Drop xmm_mdq_mode case label. |
| (OP_E_memory): Replace xmm_mdq_mode case label by |
| vex_scalar_w_dq_mode one. |
| * i386-dis-evex-prefix.h: Replace EXxmm_mdq by EXVexWdqScalar. |
| |
| 2020-01-31 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (EXVexWdq, vex_w_dq_mode): Delete. |
| (vex_vsib_d_w_dq_mode, vex_vsib_q_w_dq_mode, |
| vex_scalar_w_dq_mode): Don't refer to vex_w_dq_mode in comments. |
| (intel_operand_size): Drop vex_w_dq_mode case label. |
| |
| 2020-01-31 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * aarch64-tbl.h (aarch64_opcode): Set C_MAX_ELEM for SVE bfcvt. |
| Remove C_SCAN_MOVPRFX for SVE bfcvtnt. |
| |
| 2020-01-30 Alan Modra <amodra@gmail.com> |
| |
| * m32c-ibld.c: Regenerate. |
| |
| 2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * bpf-opc.c: Regenerate. |
| |
| 2020-01-30 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (X86_64_C2, X86_64_C3): New enumerators. |
| (dis386): Use them to replace C2/C3 table entries. |
| (x86_64_table): Add X86_64_C2 and X86_64_C3 entries. |
| * i386-opc.tbl (ret): Split Cpu64 entries into AMD64 and Intel64 |
| ones. Use Size64 instead of DefaultSize on Intel64 ones. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-01-30 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (call): Drop DefaultSize from Intel64 JumpDword |
| forms. |
| (fldenv, fnstenv, fstenv, fnsave, fsave, frstor): Drop |
| DefaultSize. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-01-30 Alan Modra <amodra@gmail.com> |
| |
| * tic4x-dis.c (tic4x_dp): Make unsigned. |
| |
| 2020-01-27 H.J. Lu <hongjiu.lu@intel.com> |
| Jan Beulich <jbeulich@suse.com> |
| |
| PR binutils/25445 |
| * i386-dis.c (MOVSXD_Fixup): New function. |
| (movsxd_mode): New enum. |
| (x86_64_table): Use MOVSXD_Fixup and movsxd_mode on movsxd. |
| (intel_operand_size): Handle movsxd_mode. |
| (OP_E_register): Likewise. |
| (OP_G): Likewise. |
| * i386-opc.tbl: Remove Rex64 and allow 32-bit destination |
| register on movsxd. Add movsxd with 16-bit destination register |
| for AMD64 and Intel64 ISAs. |
| * i386-tbl.h: Regenerated. |
| |
| 2020-01-27 Tamar Christina <tamar.christina@arm.com> |
| |
| PR 25403 |
| * aarch64-tbl.h (struct aarch64_opcode): Re-order cfinv. |
| * aarch64-asm-2.c: Regenerate |
| * aarch64-dis-2.c: Likewise. |
| * aarch64-opc-2.c: Likewise. |
| |
| 2020-01-21 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (sysret): Drop DefaultSize. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-01-21 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (vcvtneps2bf16x): Add Broadcast, Xmmword, and |
| Dword. |
| (vcvtneps2bf16y): Add Broadcast, Ymmword, and Dword. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-01-20 Nick Clifton <nickc@redhat.com> |
| |
| * po/de.po: Updated German translation. |
| * po/pt_BR.po: Updated Brazilian Portuguese translation. |
| * po/uk.po: Updated Ukranian translation. |
| |
| 2020-01-20 Alan Modra <amodra@gmail.com> |
| |
| * hppa-dis.c (fput_const): Remove useless cast. |
| |
| 2020-01-20 Alan Modra <amodra@gmail.com> |
| |
| * arm-dis.c (print_insn_arm): Wrap 'T' value. |
| |
| 2020-01-18 Nick Clifton <nickc@redhat.com> |
| |
| * configure: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2020-01-18 Nick Clifton <nickc@redhat.com> |
| |
| Binutils 2.34 branch created. |
| |
| 2020-01-17 Christian Biesinger <cbiesinger@google.com> |
| |
| * opintl.h: Fix spelling error (seperate). |
| |
| 2020-01-17 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.tbl: Add {vex} pseudo prefix. |
| * i386-tbl.h: Regenerated. |
| |
| 2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| PR 25376 |
| * arm-dis.c (coprocessor_opcodes): Use CORE_HIGH for MVE bits. |
| (neon_opcodes): Likewise. |
| (select_arm_features): Make sure we enable MVE bits when selecting |
| armv8.1-m.main. Make sure we do not enable MVE bits when not selecting |
| any architecture. |
| |
| 2020-01-16 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl: Drop stale comment from XOP section. |
| |
| 2020-01-16 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (movq): Add VexWIG to SSE2AVX XMM->XMM forms. |
| (extractps): Add VexWIG to SSE2AVX forms. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-01-16 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-opc.tbl (pextrq, pinsrq): Drop IgnoreSize and Qword. Drop |
| Size64 from and use VexW1 on SSE2AVX forms. |
| (vpextrq, vpinsrq): Drop IgnoreSize and Qword. Drop Size64 from |
| VEX-encoded forms. Add Cpu64 to EVEX-encoded forms. Use VexW1. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-01-15 Alan Modra <amodra@gmail.com> |
| |
| * tic4x-dis.c (tic4x_version): Make unsigned long. |
| (optab, optab_special, registernames): New file scope vars. |
| (tic4x_print_register): Set up registernames rather than |
| malloc'd registertable. |
| (tic4x_disassemble): Delete optable and optable_special. Use |
| optab and optab_special instead. Throw away old optab, |
| optab_special and registernames when info->mach changes. |
| |
| 2020-01-14 Sergey Belyashov <sergey.belyashov@gmail.com> |
| |
| PR 25377 |
| * z80-dis.c (suffix): Use .db instruction to generate double |
| prefix. |
| |
| 2020-01-14 Alan Modra <amodra@gmail.com> |
| |
| * z8k-dis.c (unpack_instr): Formatting. Cast unsigned short |
| values to unsigned before shifting. |
| |
| 2020-01-13 Thomas Troeger <tstroege@gmx.de> |
| |
| * arm-dis.c (print_insn_arm): Fill in insn info fields for control |
| flow instructions. |
| (print_insn_thumb16, print_insn_thumb32): Likewise. |
| (print_insn): Initialize the insn info. |
| * i386-dis.c (print_insn): Initialize the insn info fields, and |
| detect jumps. |
| |
| 2020-01-13 Claudiu Zissulescu <claziss@gmail.com> |
| |
| * arc-opc.c (C_NE): Make it required. |
| |
| 2020-01-13 Claudiu Zissulescu <claziss@gmail.com> |
| |
| * opcode/arc-dis.c (regnames): Correct ACCL/ACCH naming, fix typo |
| reserved register name. |
| |
| 2020-01-13 Alan Modra <amodra@gmail.com> |
| |
| * ns32k-dis.c (Is_gen): Use strchr, add 'f'. |
| (print_insn_ns32k): Adjust ioffset for 'f' index_offset. |
| |
| 2020-01-13 Alan Modra <amodra@gmail.com> |
| |
| * wasm32-dis.c (print_insn_wasm32): Localise variables. Store |
| result of wasm_read_leb128 in a uint64_t and check that bits |
| are not lost when copying to other locals. Use uint32_t for |
| most locals. Use PRId64 when printing int64_t. |
| |
| 2020-01-13 Alan Modra <amodra@gmail.com> |
| |
| * score-dis.c: Formatting. |
| * score7-dis.c: Formatting. |
| |
| 2020-01-13 Alan Modra <amodra@gmail.com> |
| |
| * score-dis.c (print_insn_score48): Use unsigned variables for |
| unsigned values. Don't left shift negative values. |
| (print_insn_score32): Likewise. |
| * score7-dis.c (print_insn_score32, print_insn_score16): Likewise. |
| |
| 2020-01-13 Alan Modra <amodra@gmail.com> |
| |
| * tic4x-dis.c (tic4x_print_register): Remove dead code. |
| |
| 2020-01-13 Alan Modra <amodra@gmail.com> |
| |
| * fr30-ibld.c: Regenerate. |
| |
| 2020-01-13 Alan Modra <amodra@gmail.com> |
| |
| * xgate-dis.c (print_insn): Don't left shift signed value. |
| (ripBits): Formatting, use 1u. |
| |
| 2020-01-10 Alan Modra <amodra@gmail.com> |
| |
| * tilepro-opc.c (parse_insn_tilepro): Make opval unsigned. |
| * tilegx-opc.c (parse_insn_tilegx): Likewise. Delete raw_opval. |
| |
| 2020-01-10 Alan Modra <amodra@gmail.com> |
| |
| * m10300-dis.c (disassemble): Move extraction of DREG, AREG, RREG, |
| and XRREG value earlier to avoid a shift with negative exponent. |
| * m10200-dis.c (disassemble): Similarly. |
| |
| 2020-01-09 Nick Clifton <nickc@redhat.com> |
| |
| PR 25224 |
| * z80-dis.c (ld_ii_ii): Use correct cast. |
| |
| 2020-01-03 Sergey Belyashov <sergey.belyashov@gmail.com> |
| |
| PR 25224 |
| * z80-dis.c (ld_ii_ii): Use character constant when checking |
| opcode byte value. |
| |
| 2020-01-09 Jan Beulich <jbeulich@suse.com> |
| |
| * i386-dis.c (SEP_Fixup): New. |
| (SEP): Define. |
| (dis386_twobyte): Use it for sysenter/sysexit. |
| (enum x86_64_isa): Change amd64 enumerator to value 1. |
| (OP_J): Compare isa64 against intel64 instead of amd64. |
| * i386-opc.tbl (sysenter, sysexit): Split into AMD64 and Intel64 |
| forms. |
| * i386-tbl.h: Re-generate. |
| |
| 2020-01-08 Alan Modra <amodra@gmail.com> |
| |
| * z8k-dis.c: Include libiberty.h |
| (instr_data_s): Make max_fetched unsigned. |
| (z8k_lookup_instr): Make nibl_index and tabl_index unsigned. |
| Don't exceed byte_info bounds. |
| (output_instr): Make num_bytes unsigned. |
| (unpack_instr): Likewise for nibl_count and loop. |
| * z8kgen.c (gas <opcode_entry_type>): Make noperands, length and |
| idx unsigned. |
| * z8k-opc.h: Regenerate. |
| |
| 2020-01-07 Shahab Vahedi <shahab@synopsys.com> |
| |
| * arc-tbl.h (llock): Use 'LLOCK' as class. |
| (llockd): Likewise. |
| (scond): Use 'SCOND' as class. |
| (scondd): Likewise. |
| (llockd): Set data_size_mode to 'C_ZZ_D' which is 64-bit. |
| (scondd): Likewise. |
| |
| 2020-01-06 Alan Modra <amodra@gmail.com> |
| |
| * m32c-ibld.c: Regenerate. |
| |
| 2020-01-06 Alan Modra <amodra@gmail.com> |
| |
| PR 25344 |
| * z80-dis.c (suffix): Don't use a local struct buffer copy. |
| Peek at next byte to prevent recursion on repeated prefix bytes. |
| Ensure uninitialised "mybuf" is not accessed. |
| (print_insn_z80): Don't zero n_fetch and n_used here,.. |
| (print_insn_z80_buf): ..do it here instead. |
| |
| 2020-01-04 Alan Modra <amodra@gmail.com> |
| |
| * m32r-ibld.c: Regenerate. |
| |
| 2020-01-04 Alan Modra <amodra@gmail.com> |
| |
| * cr16-dis.c (cr16_match_opcode): Avoid shift left of signed value. |
| |
| 2020-01-04 Alan Modra <amodra@gmail.com> |
| |
| * crx-dis.c (match_opcode): Avoid shift left of signed value. |
| |
| 2020-01-04 Alan Modra <amodra@gmail.com> |
| |
| * d30v-dis.c (print_insn): Avoid signed overflow in left shift. |
| |
| 2020-01-03 Jan Beulich <jbeulich@suse.com> |
| |
| * aarch64-tbl.h (aarch64_opcode_table): Use |
| SVE_ADDR_RX_LSL{1,2,3} for LD1RO{H,W,D}. |
| |
| 2020-01-03 Jan Beulich <jbeulich@suse.com> |
| |
| * aarch64-tbl.h (aarch64_opcode_table): Correct SIMD |
| forms of SUDOT and USDOT. |
| |
| 2020-01-03 Jan Beulich <jbeulich@suse.com> |
| |
| * aarch64-tbl.h (aarch64_opcode_table): Drop 'i' from |
| uzip{1,2}. |
| * aarch64-dis-2.c: Re-generate. |
| |
| 2020-01-03 Jan Beulich <jbeulich@suse.com> |
| |
| * aarch64-tbl.h (aarch64_opcode_table): Correct 64-bit |
| FMMLA encoding. |
| * aarch64-dis-2.c: Re-generate. |
| |
| 2020-01-02 Sergey Belyashov <sergey.belyashov@gmail.com> |
| |
| * z80-dis.c: Add support for eZ80 and Z80 instructions. |
| |
| 2020-01-01 Alan Modra <amodra@gmail.com> |
| |
| Update year range in copyright notice of all files. |
| |
| For older changes see ChangeLog-2019 |
| |
| Copyright (C) 2020 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |