# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#   Copyright (C) 2012-2019 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3.  If not see
# <http://www.gnu.org/licenses/>.
#


VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
noinst_PROGRAMS = as-new$(EXEEXT)
EXTRA_PROGRAMS = itbl-test$(EXEEXT)
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
	$(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/depstand.m4 \
	$(top_srcdir)/../config/gettext-sister.m4 \
	$(top_srcdir)/../config/largefile.m4 \
	$(top_srcdir)/../config/lcmessage.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/nls.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/plugins.m4 \
	$(top_srcdir)/../config/po.m4 \
	$(top_srcdir)/../config/progtest.m4 \
	$(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
	$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
	$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/../bfd/version.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = gdb.ini .gdbinit po/Makefile.in
CONFIG_CLEAN_VPATH_FILES =
PROGRAMS = $(noinst_PROGRAMS)
am__objects_1 = app.$(OBJEXT) as.$(OBJEXT) atof-generic.$(OBJEXT) \
	compress-debug.$(OBJEXT) cond.$(OBJEXT) depend.$(OBJEXT) \
	dwarf2dbg.$(OBJEXT) dw2gencfi.$(OBJEXT) ecoff.$(OBJEXT) \
	ehopt.$(OBJEXT) expr.$(OBJEXT) flonum-copy.$(OBJEXT) \
	flonum-konst.$(OBJEXT) flonum-mult.$(OBJEXT) frags.$(OBJEXT) \
	hash.$(OBJEXT) input-file.$(OBJEXT) input-scrub.$(OBJEXT) \
	listing.$(OBJEXT) literal.$(OBJEXT) macro.$(OBJEXT) \
	messages.$(OBJEXT) output-file.$(OBJEXT) read.$(OBJEXT) \
	remap.$(OBJEXT) sb.$(OBJEXT) stabs.$(OBJEXT) subsegs.$(OBJEXT) \
	symbols.$(OBJEXT) write.$(OBJEXT)
am_as_new_OBJECTS = $(am__objects_1)
am__dirstamp = $(am__leading_dot)dirstamp
as_new_OBJECTS = $(am_as_new_OBJECTS)
am__DEPENDENCIES_1 =
am__DEPENDENCIES_2 = ../bfd/libbfd.la ../libiberty/libiberty.a
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
am_itbl_test_OBJECTS = itbl-parse.$(OBJEXT) itbl-lex.$(OBJEXT)
itbl_test_OBJECTS = $(am_itbl_test_OBJECTS)
itbl_test_DEPENDENCIES = itbl-tops.@OBJEXT@ itbl-test.@OBJEXT@ \
	$(am__DEPENDENCIES_2)
SCRIPTS = $(noinst_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
@MAINTAINER_MODE_FALSE@am__skiplex = test -f $@ ||
LEXCOMPILE = $(LEX) $(AM_LFLAGS) $(LFLAGS)
LTLEXCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(LEX) $(AM_LFLAGS) $(LFLAGS)
AM_V_LEX = $(am__v_LEX_@AM_V@)
am__v_LEX_ = $(am__v_LEX_@AM_DEFAULT_V@)
am__v_LEX_0 = @echo "  LEX     " $@;
am__v_LEX_1 = 
YLWRAP = $(top_srcdir)/../ylwrap
@MAINTAINER_MODE_FALSE@am__skipyacc = test -f $@ ||
am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \
		   -e s/c++$$/h++/ -e s/c$$/h/
YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS)
LTYACCCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(YACC) $(AM_YFLAGS) $(YFLAGS)
AM_V_YACC = $(am__v_YACC_@AM_V@)
am__v_YACC_ = $(am__v_YACC_@AM_DEFAULT_V@)
am__v_YACC_0 = @echo "  YACC    " $@;
am__v_YACC_1 = 
SOURCES = $(as_new_SOURCES) $(EXTRA_as_new_SOURCES) \
	$(itbl_test_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
	$(LISP)config.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DEJATOOL = $(PACKAGE)
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GDBINIT = @GDBINIT@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
LD = @LD@
LDFLAGS = @LDFLAGS@
LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo @LEX@ ; fi`
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
NO_WERROR = @NO_WERROR@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPCODES_LIB = @OPCODES_LIB@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@ @WARN_WRITE_STRINGS@
WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
XGETTEXT = @XGETTEXT@
YACC = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo @YACC@ ; fi`
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
atof = @atof@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
cgen_cpu_prefix = @cgen_cpu_prefix@
datadir = @datadir@
datarootdir = @datarootdir@
do_compare = @do_compare@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
extra_objects = @extra_objects@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
install_tooldir = @install_tooldir@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
obj_format = @obj_format@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_cpu_type = @target_cpu_type@
target_os = @target_os@
target_vendor = @target_vendor@
te_file = @te_file@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
zlibdir = @zlibdir@
zlibinc = @zlibinc@
AUTOMAKE_OPTIONS = dejagnu foreign no-dist subdir-objects
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
SUBDIRS = doc po
tooldir = $(exec_prefix)/$(target_alias)

# This is where we get zlib from.  zlibdir is -L../zlib and zlibinc is
# -I../zlib, unless we were configured with --with-system-zlib, in which
# case both are empty.
ZLIBINC = @zlibinc@

# Automake 1.10+ disables lex and yacc output file regeneration if
# maintainer mode is disabled.  Avoid this.
am__skiplex = 
am__skipyacc = 
AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC)
TARG_CPU = @target_cpu_type@
TARG_CPU_C = $(srcdir)/config/tc-@target_cpu_type@.c
TARG_CPU_O = config/tc-@target_cpu_type@.@OBJEXT@
TARG_CPU_H = $(srcdir)/config/tc-@target_cpu_type@.h
OBJ_FORMAT_C = $(srcdir)/config/obj-@obj_format@.c
OBJ_FORMAT_O = config/obj-@obj_format@.@OBJEXT@
OBJ_FORMAT_H = $(srcdir)/config/obj-@obj_format@.h
TARG_ENV_H = $(srcdir)/config/te-@te_file@.h
ATOF_TARG_C = $(srcdir)/config/atof-@atof@.c
ATOF_TARG_O = config/atof-@atof@.@OBJEXT@

# use @target_cpu_type@ for refering to configured target name
IT_HDRS = itbl-parse.h $(srcdir)/itbl-ops.h
IT_SRCS = itbl-parse.c itbl-lex-wrapper.c $(srcdir)/itbl-ops.c
IT_DEPS = $(srcdir)/itbl-parse.y $(srcdir)/itbl-lex.l $(srcdir)/config/itbl-@target_cpu_type@.h
IT_OBJS = itbl-parse.@OBJEXT@ itbl-lex.@OBJEXT@ itbl-ops.@OBJEXT@

# Regular source files.
GAS_CFILES = \
	app.c \
	as.c \
	atof-generic.c \
	compress-debug.c \
	cond.c \
	depend.c \
	dwarf2dbg.c \
	dw2gencfi.c \
	ecoff.c \
	ehopt.c \
	expr.c \
	flonum-copy.c \
	flonum-konst.c \
	flonum-mult.c \
	frags.c \
	hash.c \
	input-file.c \
	input-scrub.c \
	listing.c \
	literal.c \
	macro.c \
	messages.c \
	output-file.c \
	read.c \
	remap.c \
	sb.c \
	stabs.c \
	subsegs.c \
	symbols.c \
	write.c

CFILES = $(GAS_CFILES) itbl-ops.c cgen.c
HFILES = \
	as.h \
	asintl.h \
	bignum.h \
	bit_fix.h \
	cgen.h \
	compress-debug.h \
	dwarf2dbg.h \
	dw2gencfi.h \
	ecoff.h \
	emul-target.h \
	emul.h \
	expr.h \
	flonum.h \
	frags.h \
	hash.h \
	input-file.h \
	itbl-lex.h \
	itbl-ops.h \
	listing.h \
	macro.h \
	obj.h \
	output-file.h \
	read.h \
	sb.h \
	subsegs.h \
	symbols.h \
	tc.h \
	write.h


# CPU files in config.
TARGET_CPU_CFILES = \
	config/tc-aarch64.c \
	config/tc-alpha.c \
	config/tc-arc.c \
	config/tc-arm.c \
	config/tc-avr.c \
	config/tc-bfin.c \
	config/tc-cr16.c \
	config/tc-cris.c \
	config/tc-crx.c \
	config/tc-csky.c \
	config/tc-d10v.c \
	config/tc-d30v.c \
	config/tc-dlx.c \
	config/tc-epiphany.c \
	config/tc-fr30.c \
	config/tc-frv.c \
	config/tc-ft32.c \
	config/tc-h8300.c \
	config/tc-hppa.c \
	config/tc-ia64.c \
	config/tc-i386.c \
	config/tc-ip2k.c \
	config/tc-iq2000.c \
	config/tc-lm32.c \
	config/tc-m32c.c \
	config/tc-m32r.c \
	config/tc-m68hc11.c \
	config/tc-m68k.c \
	config/tc-s12z.c \
	config/tc-mcore.c \
	config/tc-mep.c \
	config/tc-metag.c \
	config/tc-microblaze.c \
	config/tc-mips.c \
	config/tc-mmix.c \
	config/tc-mn10200.c \
	config/tc-mn10300.c \
	config/tc-moxie.c \
	config/tc-msp430.c \
	config/tc-mt.c \
	config/tc-nds32.c \
	config/tc-nios2.c \
	config/tc-ns32k.c \
	config/tc-or1k.c \
	config/tc-pdp11.c \
	config/tc-pj.c \
	config/tc-ppc.c \
	config/tc-pru.c \
	config/tc-riscv.c \
	config/tc-rl78.c \
	config/tc-rx.c \
	config/tc-s390.c \
	config/tc-score.c \
	config/tc-sh.c \
	config/tc-sparc.c \
	config/tc-spu.c \
	config/tc-tic30.c \
	config/tc-tic4x.c \
	config/tc-tic54x.c \
	config/tc-tic6x.c \
	config/tc-tilegx.c \
	config/tc-tilepro.c \
	config/tc-v850.c \
	config/tc-vax.c \
	config/tc-visium.c \
	config/tc-wasm32.c \
	config/tc-xstormy16.c \
	config/tc-xc16x.c \
	config/tc-xgate.c \
	config/tc-xtensa.c \
	config/tc-z80.c \
	config/tc-z8k.c \
	config/xtensa-relax.c

TARGET_CPU_HFILES = \
	config/tc-aarch64.h \
	config/tc-alpha.h \
	config/tc-arc.h \
	config/tc-arm.h \
	config/tc-avr.h \
	config/tc-bfin.h \
	config/tc-cr16.h \
	config/tc-cris.h \
	config/tc-crx.h \
	config/tc-csky.h \
	config/tc-d10v.h \
	config/tc-d30v.h \
	config/tc-dlx.h \
	config/tc-epiphany.h \
	config/tc-fr30.h \
	config/tc-frv.h \
	config/tc-ft32.h \
	config/tc-h8300.h \
	config/tc-hppa.h \
	config/tc-ia64.h \
	config/tc-i386.h \
	config/tc-ip2k.h \
	config/tc-iq2000.h \
	config/tc-lm32.h \
	config/tc-m32c.h \
	config/tc-m32r.h \
	config/tc-m68hc11.h \
	config/tc-m68k.h \
	config/tc-s12z.h \
	config/tc-mcore.h \
	config/tc-mep.h \
	config/tc-metag.h \
	config/tc-microblaze.h \
	config/tc-mips.h \
	config/tc-mmix.h \
	config/tc-mn10200.h \
	config/tc-mn10300.h \
	config/tc-msp430.h \
	config/tc-mt.h \
	config/tc-nds32.h \
	config/tc-nios2.h \
	config/tc-ns32k.h \
	config/tc-or1k.h \
	config/tc-pdp11.h \
	config/tc-pj.h \
	config/tc-ppc.h \
	config/tc-pru.h \
	config/tc-riscv.h \
	config/tc-rl78.h \
	config/tc-rx.h \
	config/tc-s390.h \
	config/tc-score.h \
	config/tc-sh.h \
	config/tc-sparc.h \
	config/tc-spu.h \
	config/tc-tic30.h \
	config/tc-tic4x.h \
	config/tc-tic54x.h \
	config/tc-tic6x.h \
	config/tc-tilegx.h \
	config/tc-tilepro.h \
	config/tc-v850.h \
	config/tc-vax.h \
	config/tc-visium.h \
	config/tc-wasm32.h \
	config/tc-xstormy16.h \
	config/tc-xc16x.h \
	config/tc-xgate.h \
	config/tc-xtensa.h \
	config/tc-z80.h \
	config/tc-z8k.h \
	config/xtensa-relax.h


# OBJ files in config
OBJ_FORMAT_CFILES = \
	config/obj-aout.c \
	config/obj-coff.c \
	config/obj-ecoff.c \
	config/obj-elf.c \
	config/obj-evax.c \
	config/obj-fdpicelf.c \
	config/obj-macho.c \
	config/obj-multi.c \
	config/obj-som.c

OBJ_FORMAT_HFILES = \
	config/obj-aout.h \
	config/obj-coff.h \
	config/obj-ecoff.h \
	config/obj-elf.h \
	config/obj-evax.h \
	config/obj-fdpicelf.h \
	config/obj-macho.h \
	config/obj-multi.h \
	config/obj-som.h


# Emulation header files in config
TARG_ENV_HFILES = \
	config/te-386bsd.h \
	config/te-aix5.h \
	config/te-armeabi.h \
	config/te-armfbsdeabi.h \
	config/te-armfbsdvfp.h \
	config/te-armlinuxeabi.h \
	config/te-csky_abiv1.h \
	config/te-csky_abiv1_linux.h \
	config/te-csky_abiv2.h \
	config/te-csky_abiv2_linux.h \
	config/te-freebsd.h \
	config/te-generic.h \
	config/te-gnu.h \
	config/te-go32.h \
	config/te-hppa.h \
	config/te-hppa64.h \
	config/te-hppalinux64.h \
	config/te-ia64aix.h \
	config/te-interix.h \
	config/te-lynx.h \
	config/te-macos.h \
	config/te-nbsd.h \
	config/te-nbsd532.h \
	config/te-pc532mach.h \
	config/te-pe.h \
	config/te-solaris.h \
	config/te-svr4.h \
	config/te-symbian.h \
	config/te-tmips.h \
	config/te-vxworks.h \
	config/te-wince-pe.h

TARG_ENV_CFILES = \
	config/te-vms.c


# Multi files in config
MULTI_CFILES = \
	config/e-crisaout.c \
	config/e-criself.c \
	config/e-i386aout.c \
	config/e-i386coff.c \
	config/e-i386elf.c \
	config/e-mipself.c

CONFIG_ATOF_CFILES = \
	config/atof-ieee.c \
	config/atof-vax.c

POTFILES = $(MULTI_CFILES) $(CONFIG_ATOF_CFILES) \
	$(TARG_ENV_HFILES) $(TARG_ENV_CFILES) $(OBJ_FORMAT_HFILES) \
	$(OBJ_FORMAT_CFILES) $(TARGET_CPU_HFILES) $(TARGET_CPU_CFILES) \
	$(HFILES) $(CFILES)

noinst_SCRIPTS = $(GDBINIT)
EXTRA_SCRIPTS = .gdbinit
EXTRA_DIST = m68k-parse.c itbl-parse.c itbl-parse.h itbl-lex.c \
	bfin-parse.c bfin-parse.h bfin-lex.c \
	rl78-parse.c rl78-parse.h \
	rx-parse.c rx-parse.h

DISTCLEANFILES = targ-cpu.h obj-format.h targ-env.h itbl-cpu.h cgen-desc.h

# Now figure out from those variables how to compile and link.
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
INCDIR = $(BASEDIR)/include

# This is the variable actually used when we compile.
# Specify the directories to be searched for header files.
# Both . and srcdir are used, in that order,
# so that tm.h and config.h will be found in the compilation
# subdirectory rather than in the source directory.
AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(srcdir)/config \
	-I$(INCDIR) -I$(srcdir)/.. -I$(BFDDIR) @INCINTL@ \
	-DLOCALEDIR="\"$(datadir)/locale\""


# How to link with both our special library facilities
# and the system's installed libraries.
GASLIBS = @OPCODES_LIB@ ../bfd/libbfd.la ../libiberty/libiberty.a

# Files to be copied away after each stage in building.
STAGESTUFF = *.@OBJEXT@ $(noinst_PROGRAMS)
as_new_SOURCES = $(GAS_CFILES)
as_new_LDADD = $(TARG_CPU_O) $(OBJ_FORMAT_O) $(ATOF_TARG_O) \
	$(extra_objects) $(GASLIBS) $(LIBINTL) $(LIBM)

as_new_DEPENDENCIES = $(TARG_CPU_O) $(OBJ_FORMAT_O) $(ATOF_TARG_O) \
	$(extra_objects) $(GASLIBS) $(LIBINTL_DEP)


# The m68k operand parser.
EXTRA_as_new_SOURCES = $(CFILES) $(HFILES) $(TARGET_CPU_CFILES) \
	$(TARGET_CPU_HFILES) $(OBJ_FORMAT_CFILES) $(OBJ_FORMAT_HFILES) \
	$(TARG_ENV_CFILES) $(CONFIG_ATOF_CFILES) $(MULTI_CFILES) \
	config/m68k-parse.y config/bfin-parse.y config/rl78-parse.y \
	config/rx-parse.y
EXPECT = expect
RUNTEST = runtest
RUNTESTFLAGS = 
itbl_test_SOURCES = itbl-parse.y itbl-lex.l
itbl_test_LDADD = itbl-tops.@OBJEXT@ itbl-test.@OBJEXT@ $(GASLIBS) @LEXLIB@

# CGEN interface.
CGEN_CPU_PREFIX = @cgen_cpu_prefix@

# Remake the info files.
MOSTLYCLEANFILES = $(STAGESTUFF) core \
	testsuite/*.@OBJEXT@ testsuite/*.out testsuite/gas.log testsuite/gas.sum \
	testsuite/site.exp site.bak site.exp development.exp stage stage1 stage2

against = stage2

# Reconfigure if configure.tgt changes.
# development.sh is used to determine -Werror default.
CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.tgt $(BFDDIR)/development.sh
EXTRA_DEJAGNU_SITE_CONFIG = development.exp
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .l .lo .o .obj .y
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
gdb.ini: $(top_builddir)/config.status $(srcdir)/gdbinit.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
.gdbinit: $(top_builddir)/config.status $(srcdir)/gdbinit.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
po/Makefile.in: $(top_builddir)/config.status $(top_srcdir)/po/Make-in
	cd $(top_builddir) && $(SHELL) ./config.status $@

clean-noinstPROGRAMS:
	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
config/$(am__dirstamp):
	@$(MKDIR_P) config
	@: > config/$(am__dirstamp)
config/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) config/$(DEPDIR)
	@: > config/$(DEPDIR)/$(am__dirstamp)
config/tc-aarch64.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-alpha.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-arc.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-arm.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-avr.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-bfin.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-cr16.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-cris.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-crx.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-csky.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-d10v.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-d30v.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-dlx.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-epiphany.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-fr30.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-frv.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-ft32.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-h8300.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-hppa.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-ia64.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-i386.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-ip2k.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-iq2000.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-lm32.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-m32c.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-m32r.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-m68hc11.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-m68k.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-s12z.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-mcore.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-mep.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-metag.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-microblaze.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-mips.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-mmix.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-mn10200.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-mn10300.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-moxie.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-msp430.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-mt.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-nds32.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-nios2.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-ns32k.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-or1k.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-pdp11.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-pj.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-ppc.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-pru.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-riscv.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-rl78.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-rx.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-s390.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-score.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-sh.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-sparc.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-spu.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-tic30.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-tic4x.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-tic54x.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-tic6x.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-tilegx.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-tilepro.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-v850.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-vax.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-visium.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-wasm32.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-xstormy16.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-xc16x.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-xgate.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-xtensa.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-z80.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/tc-z8k.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/xtensa-relax.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/obj-aout.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/obj-coff.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/obj-ecoff.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/obj-elf.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/obj-evax.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/obj-fdpicelf.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/obj-macho.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/obj-multi.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/obj-som.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/te-vms.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/atof-ieee.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/atof-vax.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/e-crisaout.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/e-criself.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/e-i386aout.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/e-i386coff.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/e-i386elf.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/e-mipself.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/m68k-parse.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/bfin-parse.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/rl78-parse.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)
config/rx-parse.$(OBJEXT): config/$(am__dirstamp) \
	config/$(DEPDIR)/$(am__dirstamp)

as-new$(EXEEXT): $(as_new_OBJECTS) $(as_new_DEPENDENCIES) $(EXTRA_as_new_DEPENDENCIES) 
	@rm -f as-new$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(as_new_OBJECTS) $(as_new_LDADD) $(LIBS)

itbl-test$(EXEEXT): $(itbl_test_OBJECTS) $(itbl_test_DEPENDENCIES) $(EXTRA_itbl_test_DEPENDENCIES) 
	@rm -f itbl-test$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(itbl_test_OBJECTS) $(itbl_test_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)
	-rm -f config/*.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/app.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/as.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atof-generic.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cgen.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/compress-debug.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cond.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/depend.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dw2gencfi.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dwarf2dbg.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ecoff.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ehopt.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flonum-copy.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flonum-konst.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flonum-mult.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/frags.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hash.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/input-file.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/input-scrub.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/itbl-lex.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/itbl-ops.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/itbl-parse.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/listing.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/literal.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/macro.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/messages.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/output-file.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/read.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sb.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stabs.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/subsegs.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symbols.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/write.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/atof-ieee.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/atof-vax.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/bfin-parse.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/e-crisaout.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/e-criself.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/e-i386aout.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/e-i386coff.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/e-i386elf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/e-mipself.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/m68k-parse.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/obj-aout.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/obj-coff.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/obj-ecoff.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/obj-elf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/obj-evax.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/obj-fdpicelf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/obj-macho.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/obj-multi.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/obj-som.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/rl78-parse.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/rx-parse.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-aarch64.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-alpha.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-arc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-arm.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-avr.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-bfin.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-cr16.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-cris.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-crx.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-csky.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-d10v.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-d30v.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-dlx.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-epiphany.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-fr30.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-frv.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-ft32.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-h8300.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-hppa.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-i386.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-ia64.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-ip2k.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-iq2000.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-lm32.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-m32c.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-m32r.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-m68hc11.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-m68k.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-mcore.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-mep.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-metag.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-microblaze.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-mips.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-mmix.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-mn10200.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-mn10300.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-moxie.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-msp430.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-mt.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-nds32.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-nios2.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-ns32k.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-or1k.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-pdp11.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-pj.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-ppc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-pru.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-riscv.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-rl78.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-rx.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-s12z.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-s390.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-score.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-sh.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-sparc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-spu.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-tic30.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-tic4x.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-tic54x.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-tic6x.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-tilegx.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-tilepro.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-v850.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-vax.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-visium.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-wasm32.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-xc16x.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-xgate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-xstormy16.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-xtensa.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-z80.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/tc-z8k.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/te-vms.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@config/$(DEPDIR)/xtensa-relax.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

.l.c:
	$(AM_V_LEX)$(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)

.y.c:
	$(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h `echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG)
	@echo 'Making a new site.exp file ...'
	@echo '## these variables are automatically generated by make ##' >site.tmp
	@echo '# Do not edit here.  If you wish to override these values' >>site.tmp
	@echo '# edit the last section' >>site.tmp
	@echo 'set srcdir "$(srcdir)"' >>site.tmp
	@echo "set objdir `pwd`" >>site.tmp
	@echo 'set build_alias "$(build_alias)"' >>site.tmp
	@echo 'set build_triplet $(build_triplet)' >>site.tmp
	@echo 'set host_alias "$(host_alias)"' >>site.tmp
	@echo 'set host_triplet $(host_triplet)' >>site.tmp
	@echo 'set target_alias "$(target_alias)"' >>site.tmp
	@echo 'set target_triplet $(target_triplet)' >>site.tmp
	@list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \
	  echo "## Begin content included from file $$f.  Do not modify. ##" \
	   && cat `test -f "$$f" || echo '$(srcdir)/'`$$f \
	   && echo "## End content included from file $$f. ##" \
	   || exit 1; \
	 done >> site.tmp
	@echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp
	@if test -f site.exp; then \
	   sed -e '1,/^## End of auto-generated content.*##/d' site.exp >> site.tmp; \
	 fi
	@-rm -f site.bak
	@test ! -f site.exp || mv site.exp site.bak
	@mv site.tmp site.exp

distclean-DEJAGNU:
	-rm -f site.exp site.bak
	-l='$(DEJATOOL)'; for tool in $$l; do \
	  rm -f $$tool.sum $$tool.log; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
check: check-recursive
all-am: Makefile $(PROGRAMS) $(SCRIPTS) config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-rm -f config/$(DEPDIR)/$(am__dirstamp)
	-rm -f config/$(am__dirstamp)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-rm -f config/bfin-parse.c
	-rm -f config/m68k-parse.c
	-rm -f config/rl78-parse.c
	-rm -f config/rx-parse.c
	-rm -f itbl-lex.c
	-rm -f itbl-parse.c
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \
	mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf ./$(DEPDIR) config/$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-DEJAGNU distclean-compile \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-exec-local

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf ./$(DEPDIR) config/$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(am__recursive_targets) all check-am install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--refresh check check-DEJAGNU check-am clean clean-cscope \
	clean-generic clean-libtool clean-noinstPROGRAMS cscope \
	cscopelist-am ctags ctags-am distclean distclean-DEJAGNU \
	distclean-compile distclean-generic distclean-hdr \
	distclean-libtool distclean-tags dvi dvi-am html html-am info \
	info-am install install-am install-data install-data-am \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-exec-local install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-am uninstall uninstall-am

.PRECIOUS: Makefile

po/POTFILES.in: @MAINT@ Makefile
	for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
	  && mv tmp $(srcdir)/po/POTFILES.in

diststuff: $(EXTRA_DIST) info

check-DEJAGNU: site.exp
	if [ -d testsuite ]; then \
	  true; \
	else \
	  mkdir testsuite; \
	fi
	rm -f testsuite/site.exp
	cp site.exp testsuite/site.exp
	rootme=`pwd`; export rootme; \
	srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
	LC_ALL=C; export LC_ALL; \
	EXPECT=${EXPECT} ; export EXPECT ; \
	runtest=$(RUNTEST); \
	cd testsuite; \
	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
	  $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
		$(RUNTESTFLAGS); \
	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
	fi

development.exp: $(BFDDIR)/development.sh
	$(EGREP) "[development|experimental]=" $(BFDDIR)/development.sh  \
	  | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@

# If m68k-parse.y is in a different directory, then ylwrap will use an
# absolute path when it invokes yacc, which will cause yacc to put the
# absolute path into the generated file.  That's a pain when it comes
# to generating snapshots, because it introduces spurious diffs.
# Since when we make the snapshots $(srcdir) = ".", we check for that
# case and handle it differently.  This means that anybody who
# configures with $(srcdir) = "." will have to set their path in the
# debugger if they want to debug m68k-parse.y.  This is bad, but on
# the other hand it's good that people who use the prebuilt
# m68k-parse.c don't get a spurious absolute path.
m68k-parse.c: $(srcdir)/config/m68k-parse.y
	f=$(srcdir)/config/m68k-parse.y; \
	if [ $$f = "./config/m68k-parse.y" ]; then \
	  ln -s config/m68k-parse.y . > /dev/null 2>/dev/null || \
	   ln config/m68k-parse.y . > /dev/null 2>/dev/null || \
	   cp config/m68k-parse.y . >/dev/null 2>/dev/null; \
	  f=m68k-parse.y; \
	else true; fi; \
	$(SHELL) $(YLWRAP) $$f y.tab.c m68k-parse.c -- $(YACCCOMPILE); \
	if [ $$f = "m68k-parse.y" ]; then \
	  rm -f m68k-parse.y; \
	else true; fi
# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
m68k-parse.@OBJEXT@: m68k-parse.c
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f m68k-parse.c || echo $(srcdir)/`m68k-parse.c $(NO_WERROR)
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='m68k-parse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c `test -f m68k-parse.c || echo $(srcdir)/`m68k-parse.c $(NO_WERROR)

# Don't let the .y.h rule clobber m68k-parse.h.
m68k-parse.h: ; @true
$(srcdir)/config/m68k-parse.h: ; @true
bfin-parse.c: $(srcdir)/config/bfin-parse.y $(srcdir)/../bfd/reloc.c
	$(SHELL) $(YLWRAP) $(srcdir)/config/bfin-parse.y y.tab.c bfin-parse.c y.tab.h bfin-parse.h -- $(YACCCOMPILE) -d ;
bfin-parse.h: bfin-parse.c
bfin-parse.h: ; @true
$(srcdir)/config/bfin-parse.h: ; @true

bfin-lex.c: $(srcdir)/config/bfin-lex.l
	$(SHELL) $(YLWRAP) $(srcdir)/config/bfin-lex.l lex.yy.c bfin-lex.c -- $(LEXCOMPILE)
bfin-lex-wrapper.@OBJEXT@: $(srcdir)/config/bfin-lex-wrapper.c bfin-lex.c bfin-parse.h $(srcdir)/config/bfin-defs.h
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/config/bfin-lex-wrapper.c $(NO_WERROR)
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='bfin-lex-wrapper.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c $(srcdir)/config/bfin-lex-wrapper.c $(NO_WERROR)
rl78-parse.c: $(srcdir)/config/rl78-parse.y $(srcdir)/../bfd/reloc.c
	$(SHELL) $(YLWRAP) $(srcdir)/config/rl78-parse.y y.tab.c rl78-parse.c y.tab.h rl78-parse.h -- $(YACCCOMPILE) -d ;
rl78-parse.h: rl78-parse.c
rl78-defs.h: ; @true
$(srcdir)/config/rl78-defs.h: ; @true
rx-parse.c: $(srcdir)/config/rx-parse.y $(srcdir)/../bfd/reloc.c
	$(SHELL) $(YLWRAP) $(srcdir)/config/rx-parse.y y.tab.c rx-parse.c y.tab.h rx-parse.h -- $(YACCCOMPILE) -d ;
rx-parse.h: rx-parse.c
rx-defs.h: ; @true
$(srcdir)/config/rx-defs.h: ; @true

# The instruction table specification lexical analyzer and parser.

# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
itbl-lex-wrapper.@OBJEXT@: itbl-lex-wrapper.c itbl-lex.c itbl-parse.h
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/itbl-lex-wrapper.c $(NO_WERROR)
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='itbl-lex-wrapper.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c $(srcdir)/itbl-lex-wrapper.c $(NO_WERROR)

# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
itbl-parse.@OBJEXT@: itbl-parse.c
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f itbl-parse.c || echo $(srcdir)/`itbl-parse.c $(NO_WERROR)
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='itbl-parse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c `test -f itbl-parse.c || echo $(srcdir)/`itbl-parse.c $(NO_WERROR)

itbl-parse.c: $(srcdir)/itbl-parse.y
	$(SHELL) $(YLWRAP) $(srcdir)/itbl-parse.y y.tab.c itbl-parse.c y.tab.h itbl-parse.h -- $(YACCCOMPILE) -d

itbl-parse.h: itbl-parse.c ; @true

itbl-ops.@OBJEXT@: itbl-parse.h

itbl-tops.@OBJEXT@: itbl-ops.c itbl-parse.h
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -o $@ -c -DSTAND_ALONE $(srcdir)/itbl-ops.c
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='itbl-ops.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -o $@ -DSTAND_ALONE -c $(srcdir)/itbl-ops.c

itbl-test.@OBJEXT@: $(srcdir)/testsuite/gas/all/itbl-test.c
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ -DSTAND_ALONE $(srcdir)/testsuite/gas/all/itbl-test.c
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='itbl-test.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c -DSTAND_ALONE $(srcdir)/testsuite/gas/all/itbl-test.c

cgen.@OBJEXT@: cgen.c cgen.h cgen-desc.h subsegs.h \
	$(INCDIR)/obstack.h $(INCDIR)/opcode/cgen.h \
	$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-desc.h \
	$(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-opc.h

.PHONY: install-exec-local install-data-local
.PHONY: install-exec-bindir install-exec-tooldir

install-exec-local: install-exec-bindir @install_tooldir@

install-exec-bindir: $(noinst_PROGRAMS)
	$(mkinstalldirs) $(DESTDIR)$(bindir)
	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	  else :; fi; \
	done

install-exec-tooldir: install-exec-bindir $(noinst_PROGRAMS)
	$(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
	n=`echo as | sed '$(transform)'`; \
	if [ "$(bindir)/$$n$(EXEEXT)" != "$(tooldir)/bin/as$(EXEEXT)" ]; then \
	  rm -f $(DESTDIR)$(tooldir)/bin/as$(EXEEXT); \
	  ln $(DESTDIR)$(bindir)/$$n$(EXEEXT) $(DESTDIR)$(tooldir)/bin/as$(EXEEXT) >/dev/null 2>/dev/null \
	    || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) as-new$(EXEEXT) $(DESTDIR)$(tooldir)/bin/as$(EXEEXT); \
	else \
	  true ; \
	fi

# These exist for maintenance purposes.

.PHONY: bootstrap bootstrap2 bootstrap3 stage1 stage2 stage3 comparison

bootstrap: as-new$(EXEEXT)
	$(MAKE) stage1
	rm -f stage && ln -s stage1 stage
	$(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)
	$(MAKE) stage2
	rm -f stage && ln -s stage2 stage
	$(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)
	$(MAKE) comparison against=stage2

bootstrap2:
	rm -f stage && ln -s stage1 stage
	$(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)
	$(MAKE) stage2
	rm -f stage && ln -s stage2 stage
	$(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)
	$(MAKE) comparison against=stage2

bootstrap3:
	rm -f stage && ln -s stage2 stage
	$(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)
	$(MAKE) comparison against=stage2

# Copy the object files from a particular stage into a subdirectory.
stage1:
	-mkdir stage1
	-mv $(STAGESTUFF) stage1
	if [ -f stage1/as-new$(EXEEXT) -a ! -f stage1/as$(EXEEXT) ] ; then (cd stage1 ; ln -s as-new$(EXEEXT) as$(EXEEXT)) ; fi

stage2:
	-mkdir stage2
	-mv $(STAGESTUFF) stage2
	if [ -f stage2/as-new$(EXEEXT) -a ! -f stage2/as$(EXEEXT) ] ; then (cd stage2 ; ln -s as-new$(EXEEXT) as$(EXEEXT)) ; fi

stage3:
	-mkdir stage3
	-mv $(STAGESTUFF) stage3
	if [ -f stage3/as-new$(EXEEXT) -a ! -f stage3/as$(EXEEXT) ] ; then (cd stage3 ; ln -s as-new as$(EXEEXT)) ; fi

comparison:
	x=0 ; \
	for file in *.@OBJEXT@ ; do \
	  f1=./$$file; f2=${against}/$$file; \
	  $(do_compare) > /dev/null 2>&1; \
	  if test $$? -ne 0; then \
	    echo $$file differs ; \
	    x=1 ; \
	  fi ; \
	done ; \
	exit $$x
	-rm -f tmp-foo*

.PHONY: de-stage1 de-stage2 de-stage3

de-stage1:
	- (cd stage1 ; rm -f as$(EXEEXT) ; mv -f * ..)
	- rmdir stage1

de-stage2:
	- (cd stage2 ; rm -f as$(EXEEXT) ; mv -f * ..)
	- rmdir stage2

de-stage3:
	- (cd stage3 ; rm -f as$(EXEEXT) ; mv -f * ..)
	- rmdir stage3

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: