| # Copyright 1993, 1996, 1997, 2002 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # dejagnu@gnu.org |
| |
| # Written by the Center for Software Science at the University of Utah |
| # and by Cygnus Support. |
| |
| proc do_ble_relocation_test {} { |
| set testname "blebug.s: Test for proper relocation for BLE (part 2)" |
| set x 0 |
| |
| if [gas_test_old "blebug.s" "" "Proper relocation for BLE (part 1)"] then { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| if {[istarget hppa*64*-*-*] |
| || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| # At one time both versions of the assembler would incorrectly use |
| # a PC-relative relocation for a BLE instruction. |
| while 1 { |
| expect { |
| -re "^0+\[^\n\]*DIR21L\[^\n\]*\n" { set x 1 } |
| -re "^0+4\[^\n\]*DIR17R\[^\n\]*\n" { set x 1 } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } else { |
| # At one time both versions of the assembler would incorrectly use |
| # a PC-relative relocation for a BLE instruction. |
| while 1 { |
| expect { |
| -re "^0+4\[^\n\]*ABS_CALL\[^\n\]*\n" { set x 1 } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==1] then { pass $testname } else { fail $testname } |
| } |
| |
| proc do_relocation_reduction_tests {} { |
| set testname "reduce.s: Test relocation reductions (part 2)" |
| set x 0 |
| |
| if {[istarget hppa*64*-*-*] |
| || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| return |
| } |
| |
| if [gas_test_old "reduce.s" "" "Relocation reductions (part1)"] then { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Check to make sure relocations involving procedure labels |
| # are not reduced to a relocation involving some other symbol. |
| # Doing so makes generating parameter relocation stubs impossible. |
| while 1 { |
| expect { |
| -re "^0+4\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+14\[^\n\]*PCREL\[^\n\]*foo\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==2] then { pass $testname } else { fail $testname } |
| |
| set testname "reduce2.s: More relocation reduction tests (part 2)" |
| set x 0 |
| |
| if [gas_test_old "reduce2.s" "" "More relocation reductions (part1)"] then { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Check to make sure DLT relative relocs are not reduced to sym+addend |
| # Doing so doesn't work as one might expect |
| while 1 { |
| expect { |
| -re "^0+4\[^\n\]*DLT\[^\n\]*L.C0000\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+1c\[^\n\]*DLT\[^\n\]*L.C0000\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+30\[^\n\]*DLT\[^\n\]*L.C0001\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+48\[^\n\]*DLT\[^\n\]*L.C0001\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==2] then { pass $testname } else { fail $testname } |
| |
| set testname "reduce3.s: Test even more relocation reductions (part 2)" |
| set x 0 |
| |
| if [gas_test_old "reduce3.s" "" "Even more relocation reductions (part1)"] then { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Check to make sure relocations involving procedure labels |
| # are not reduced to a relocation involving some other symbol. |
| # Doing so makes generating parameter relocation stubs impossible. |
| while 1 { |
| expect { |
| -re "^0+c\[^\n\]*yabba\[^\n\+\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+c\[^\n\]*yabba\+\[^\n\]*\n" |
| { set x 0; break } |
| -re "^0+10\[^\n\]*yabba\[^\n\+\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+10\[^\n\]*yabba\+\[^\n\]*\n" |
| { set x 0; break } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==2] then { pass $testname } else { fail $testname } |
| } |
| |
| proc do_ble_mode_selector_test {} { |
| set testname "blebug2.s: blebug2" |
| set x 0 |
| |
| gas_start "blebug2.s" "-al" |
| |
| # GAS uses too many bits on the BLE instruction. |
| while 1 { |
| expect { |
| -re "^ +\[0-9\]+ 0000 20202801\[^\n\]*\n" { set x [expr $x+1] } |
| -re "^ +\[0-9\]+ 0004 E420E008\[^\n\]*\n" { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| gas_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==2] then { pass $testname } else { fail $testname } |
| } |
| |
| proc do_ble_relocation_test {} { |
| set testname "blebug3.s: blebug3" |
| set x 0 |
| |
| gas_start "blebug3.s" "-al" |
| |
| while 1 { |
| expect { |
| -re "^ +\[0-9\]+ 0000 E4002000\[^\n\]*\n" { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| gas_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==1] then { pass $testname } else { fail $testname } |
| } |
| |
| proc do_plabel_relocation_test {} { |
| set testname "plabelbug.s: Old gas-1.36 plabel bug (part 2)" |
| set x 0 |
| |
| if [gas_test_old "plabelbug.s" "" "Old gas-1.36 plabel bug (part 1)"] { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Check that we make PLABEL relocation entries when they're needed. |
| while 1 { |
| expect { |
| -re "^0+\[^\n\]*PLABEL\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+4\[^\n\]*PLABEL\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==2] then { pass $testname } else { fail $testname } |
| } |
| } |
| |
| proc do_selector_scope_test {} { |
| set testname "selectorbug.s: Test scope of field selector" |
| set x 0 |
| |
| if [istarget hppa*64*-*-*] then { |
| return |
| } |
| |
| if [gas_test_old "selectorbug.s" "" "Test scope of field selector (part 1)"] { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Check to make sure the relocation entry after the plabel is correct. |
| # If an old field selector was incorrectly "carried" over, then |
| # this test will fail. |
| if {[istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| while 1 { |
| expect { |
| -re "^0+14\[^\n\]*DIR32\[^\n\]*\n" |
| { set x 1 } |
| -re "^0+14\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n" |
| { set x 0 } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } else { |
| while 1 { |
| expect { |
| -re "^0+14\[^\n\]*DATA_ONE\[^\n\]*\n" |
| { set x 1 } |
| -re "^0+14\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n" |
| { set x 0 } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==1] then { pass $testname } else { fail $testname } |
| } |
| } |
| |
| proc do_local_label_as_operand_test {} { |
| set testname "labelopbug.s: Test local label as operand (non-branching)" |
| set x 0 |
| |
| if [gas_test_old "labelopbug.s" "" "Local label as operand (part 1)"] { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Check to make sure we handle difference of local labels as an operand |
| # to a non-branching instruction correctly. On hppa elf targets, the |
| # R_PARISC_DIR21 and R_PARISC_DIR14R relocations are done with LR and |
| # RR selectors, respectively. As a result, we can't reduce these to |
| # section offsets without risking incorrect rounding. So, we just |
| # check to see if the label hasn't been reduced. |
| if {[istarget hppa*64*-*-*] |
| || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| while 1 { |
| expect { |
| -re "^0+2c\[^\n\]*L.0002\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+30\[^\n\]*L.0002\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } else { |
| while 1 { |
| expect { |
| -re "^0+2c\[^\n\]*0x0+24\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+30\[^\n\]*0x0+24\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==2] then { pass $testname } else { fail $testname } |
| } |
| } |
| |
| proc do_exit_relocation_test {} { |
| set testname "exitbug.s: Test for bogus R_EXIT relocation (part 2)" |
| set x 0 |
| |
| # Elf (osf) does not use ENTRY/EXIT relocations. |
| # I guess we could look at the unwind subspaces it builds... |
| # Until then, make sure it still assembles. |
| if {[istarget hppa*64*-*-*] |
| || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)" |
| return |
| } |
| |
| if [gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)"] { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Note that a match here is really a FAILURE! |
| while 1 { |
| expect { |
| -re "^0+\[^\n\]*R_EXIT\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==0] then { pass $testname } else { fail $testname } |
| } |
| } |
| |
| proc do_cross_space_fixup_test_1 {} { |
| set testname "fixupbug.s: Test cross space jump/call fixup bug (part 2)" |
| set x 0 |
| |
| # ELF doesn't really handle extra sections too well... |
| if {[istarget hppa*64*-*-*] |
| || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| return |
| } |
| |
| if [gas_test_old "fixupbug.s" "" "Test cross space jump/call fixup bug (part 1)"] { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Make sure GAS generated a fixup/relocation for the cross-space |
| # branch/call |
| while 1 { |
| expect { |
| -re "^0+\[^\n\]*PCREL_CALL\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==1] then { pass $testname } else { fail $testname } |
| } |
| } |
| |
| proc do_cross_space_fixup_test_2 {} { |
| set testname "fixupbug.s: Test cross space jump/call fixup bug (part 3)" |
| set x 0 |
| |
| # ELF doesn't really handle extra sections too well... |
| if {[istarget hppa*64*-*-*] |
| || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| return |
| } |
| |
| gas_start "fixupbug.s" "-al" |
| |
| while 1 { |
| expect { |
| -re "^ +\[0-9\]+ 0000 E8000002\[^\n\]*\n" { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| gas_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==1] then { pass $testname } else { fail $testname } |
| } |
| |
| proc do_round_mode_test {} { |
| set testname "roundmode.s: Test switching of rounding modes (part 2)" |
| set x 0 |
| |
| if [gas_test_old "roundmode.s" "" "Test switch of rounding modes(part 1)"] { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Make sure GAS generated correct relocations to switch rounding modes. |
| # Also make sure (for SOM) that redundant rounding mode relocations |
| # were eliminated. |
| if {[istarget hppa*64*-*-*] |
| || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| while 1 { |
| expect { |
| -re "^0+\[^\n\]*DIR21L\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+4\[^\n\]*DIR14R\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+8\[^\n\]*DIR21L\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+c\[^\n\]*DIR14R\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+10\[^\n\]*DIR21L\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+14\[^\n\]*DIR14R\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+18\[^\n\]*DIR21L\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+1c\[^\n\]*DIR14R\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } else { |
| while 1 { |
| expect { |
| -re "^0+\[^\n\]*R_R_MODE\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+4\[^\n\]*R_R_MODE\[^\n\]*\n" |
| { fail $testname } |
| -re "^0+8\[^\n\]*R_N_MODE\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+c\[^\n\]*R_N_MODE\[^\n\]*\n" |
| { fail $testname } |
| -re "^0+10\[^\n\]*R_R_MODE\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+14\[^\n\]*R_R_MODE\[^\n\]*\n" |
| { fail $testname } |
| -re "^0+1c\[^\n\]*R_R_MODE\[^\n\]*\n" |
| { fail $testname } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if {[istarget hppa*64*-*-*] |
| || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| if [expr $x==8] then { pass $testname } else { fail $testname } |
| } else { |
| if [expr $x==3] then { pass $testname } else { fail $testname } |
| } |
| } |
| } |
| |
| proc do_function_reloc_bug {} { |
| set testname "funcrelocbug.s: Test for reloc bug in non-plabel function reference (part 2)" |
| set x 0 |
| |
| if [gas_test_old "funcrelocbug.s" "" "Test for reloc bug in non-plabel function reference (part 1)"] { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Make sure GAS generated a correct relocation for the reference. |
| # branch/call |
| while 1 { |
| expect { |
| -re "^0+cc\[^\n\]*f2___4\[^\n+\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+d0\[^\n\]*f2___4\[^\n+\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==2] then { pass $testname } else { fail $testname } |
| |
| set testname "funcrelocbug.s: Test for reloc bug in non-plabel function reference (part3)" |
| set x 0 |
| |
| objdump_start_no_subdir "a.out" "--prefix-addresses -d" |
| # Make sure we didn't put anything in the instruction itself! |
| while 1 { |
| expect { |
| -re "^0+cc\[^\n\]*ldil 0,r20\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "^0+d0\[^\n\]*ldo 0\[\(\]+r20\[\)\]+,r19\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==2] then { pass $testname } else { fail $testname } |
| } |
| |
| } |
| |
| proc do_r_no_reloc {} { |
| set testname "r_no_reloc.s: Test for reloc bug in 4-byte R_NO_RELCOATION fixups (part 2)" |
| set x 0 |
| |
| if [gas_test_old "r_no_reloc.s" "" "Test for reloc bug in 4-byte R_NO_RELOCATION fixups (part 1)"] { |
| objdump_start_no_subdir "a.out" "-r" |
| |
| # Make sure GAS generated a correct relocation for the reference. |
| while 1 { |
| expect { |
| -re "^0+c0004\[^\n\]*PLABEL\[^\n]*g\[^\n\]*\n" |
| { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| objdump_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==1] then { pass $testname } else { fail $testname } |
| |
| } |
| } |
| |
| proc do_pic_relocation_test {} { |
| set testname "picreloc.s: Test for proper PIC relocation (part 2)" |
| set x 0 |
| |
| # ELF doesn't really handle extra sections too well... |
| if {[istarget hppa*64*-*-*] |
| || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| return |
| } |
| |
| gas_start "picreloc.s" "-al" |
| |
| while 1 { |
| expect { |
| -re "^ +\[0-9\]+ 0000 00000004\[^\n\]*\n" { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| gas_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==1] then { pass $testname } else { fail $testname } |
| } |
| |
| proc do_apply_test {} { |
| set testname "applybug.s: Test for proper fixup application (part 2)" |
| set x 0 |
| |
| # ELF doesn't really handle extra sections too well... |
| if {[istarget hppa*64*-*-*] |
| || [istarget hppa*-*-*elf*] || [istarget hppa*-*-linux*]} then { |
| return |
| } |
| |
| gas_start "applybug.s" "-al" |
| |
| while 1 { |
| expect { |
| -re "^ +\[0-9\]+ 0000 00000000\[^\n\]*\n" { set x [expr $x+1] } |
| -re "^ +\[0-9\]+ 0004 00000000\[^\n\]*\n" { set x [expr $x+1] } |
| -re "^ +\[0-9\]+ 0008 00000000\[^\n\]*\n" { set x [expr $x+1] } |
| -re "\[^\n\]*\n" { } |
| timeout { perror "timeout\n"; break } |
| eof { break } |
| } |
| } |
| |
| # This was intended to do any cleanup necessary. It kinda looks like it |
| # isn't needed, but just in case, please keep it in for now. |
| gas_finish |
| |
| # Did we find what we were looking for? If not, flunk it. |
| if [expr $x==3] then { pass $testname } else { fail $testname } |
| } |
| |
| if [istarget hppa*-*-*] then { |
| # Make sure we put the right relocation entry on a BLE instruction. |
| do_ble_relocation_test |
| |
| # Make sure relocation reductions are not too agressive about |
| # adjusting relocations against some symbols. |
| do_relocation_reduction_tests |
| |
| # Check that mode selectors on a ble instruction actually work. |
| do_ble_mode_selector_test |
| |
| # Check that we take the -8 adjustment into account when zeroing |
| # out the displacement field in a ble instruction with a reloc |
| do_ble_relocation_test |
| |
| # 1.36 simply didn't generate all the plabels it should have. Make |
| # sure gas-2 does. |
| do_plabel_relocation_test |
| |
| # Make sure a field selector only effects the current instruction |
| # or assembler directive. |
| do_selector_scope_test |
| |
| # This should really generate a relocation. It would make life much |
| # easier on the optimizing linker. Until then just make sure the |
| # difference is computed correctly. |
| do_local_label_as_operand_test |
| |
| # GAS2 incorrectly generated R_EXIT relocations when .exit directives |
| # were not in the source code. |
| do_exit_relocation_test |
| |
| # GAS2 incorrectly thought it could apply a fixup for a pc-relative |
| # branch/call which crossed different subspaces. |
| # Also check that the assembled instruction is correct |
| do_cross_space_fixup_test_1 |
| do_cross_space_fixup_test_2 |
| |
| # Make sure we switch rounding modes correctly |
| do_round_mode_test |
| |
| # Test for a bug found when a function was used in a non-branching |
| # instruction *without* a plabel (for portable runtime model) |
| do_function_reloc_bug |
| |
| # Test for an off-by-one bug in the handling of 4-byte R_NO_RELOCATION |
| # fixups. |
| do_r_no_reloc |
| |
| # Test a relocation problem which shows up when building shared |
| # libraries in SOM |
| do_pic_relocation_test |
| |
| # Test a problem with md_apply_fix that was introduced when fixing |
| # the pic relocation test. |
| do_apply_test |
| |
| # Make sure gas doesn't resolve long-calls which are to be fixed |
| # by the linker |
| gas_test "longcall.s" "" "" "Avoid resolving long-calls" |
| } |