/* Target-dependent code for Renesas M32R, for GDB.

   Copyright (C) 1996-2023 Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

#include "defs.h"
#include "frame.h"
#include "frame-unwind.h"
#include "frame-base.h"
#include "symtab.h"
#include "gdbtypes.h"
#include "gdbcmd.h"
#include "gdbcore.h"
#include "value.h"
#include "inferior.h"
#include "symfile.h"
#include "objfiles.h"
#include "osabi.h"
#include "language.h"
#include "arch-utils.h"
#include "regcache.h"
#include "trad-frame.h"
#include "dis-asm.h"
#include "m32r-tdep.h"
#include <algorithm>

/* The size of the argument registers (r0 - r3) in bytes.  */
#define M32R_ARG_REGISTER_SIZE 4

/* Local functions */

static CORE_ADDR
m32r_frame_align (struct gdbarch *gdbarch, CORE_ADDR sp)
{
  /* Align to the size of an instruction (so that they can safely be
     pushed onto the stack.  */
  return sp & ~3;
}


/* Breakpoints
 
   The little endian mode of M32R is unique.  In most of architectures,
   two 16-bit instructions, A and B, are placed as the following:
  
   Big endian:
   A0 A1 B0 B1
  
   Little endian:
   A1 A0 B1 B0
  
   In M32R, they are placed like this:
  
   Big endian:
   A0 A1 B0 B1
  
   Little endian:
   B1 B0 A1 A0
  
   This is because M32R always fetches instructions in 32-bit.
  
   The following functions take care of this behavior.  */

static int
m32r_memory_insert_breakpoint (struct gdbarch *gdbarch,
			       struct bp_target_info *bp_tgt)
{
  CORE_ADDR addr = bp_tgt->placed_address = bp_tgt->reqstd_address;
  int val;
  gdb_byte buf[4];
  gdb_byte contents_cache[4];
  gdb_byte bp_entry[] = { 0x10, 0xf1 };	/* dpt */

  /* Save the memory contents.  */
  val = target_read_memory (addr & 0xfffffffc, contents_cache, 4);
  if (val != 0)
    return val;			/* return error */

  memcpy (bp_tgt->shadow_contents, contents_cache, 4);
  bp_tgt->shadow_len = 4;

  /* Determine appropriate breakpoint contents and size for this address.  */
  if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
    {
      if ((addr & 3) == 0)
	{
	  buf[0] = bp_entry[0];
	  buf[1] = bp_entry[1];
	  buf[2] = contents_cache[2] & 0x7f;
	  buf[3] = contents_cache[3];
	}
      else
	{
	  buf[0] = contents_cache[0];
	  buf[1] = contents_cache[1];
	  buf[2] = bp_entry[0];
	  buf[3] = bp_entry[1];
	}
    }
  else				/* little-endian */
    {
      if ((addr & 3) == 0)
	{
	  buf[0] = contents_cache[0];
	  buf[1] = contents_cache[1] & 0x7f;
	  buf[2] = bp_entry[1];
	  buf[3] = bp_entry[0];
	}
      else
	{
	  buf[0] = bp_entry[1];
	  buf[1] = bp_entry[0];
	  buf[2] = contents_cache[2];
	  buf[3] = contents_cache[3];
	}
    }

  /* Write the breakpoint.  */
  val = target_write_memory (addr & 0xfffffffc, buf, 4);
  return val;
}

static int
m32r_memory_remove_breakpoint (struct gdbarch *gdbarch,
			       struct bp_target_info *bp_tgt)
{
  CORE_ADDR addr = bp_tgt->placed_address;
  int val;
  gdb_byte buf[4];
  gdb_byte *contents_cache = bp_tgt->shadow_contents;

  buf[0] = contents_cache[0];
  buf[1] = contents_cache[1];
  buf[2] = contents_cache[2];
  buf[3] = contents_cache[3];

  /* Remove parallel bit.  */
  if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
    {
      if ((buf[0] & 0x80) == 0 && (buf[2] & 0x80) != 0)
	buf[2] &= 0x7f;
    }
  else				/* little-endian */
    {
      if ((buf[3] & 0x80) == 0 && (buf[1] & 0x80) != 0)
	buf[1] &= 0x7f;
    }

  /* Write contents.  */
  val = target_write_raw_memory (addr & 0xfffffffc, buf, 4);
  return val;
}

/* Implement the breakpoint_kind_from_pc gdbarch method.  */

static int
m32r_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr)
{
  if ((*pcptr & 3) == 0)
    return 4;
  else
    return 2;
}

/* Implement the sw_breakpoint_from_kind gdbarch method.  */

static const gdb_byte *
m32r_sw_breakpoint_from_kind (struct gdbarch *gdbarch, int kind, int *size)
{
  static gdb_byte be_bp_entry[] = {
    0x10, 0xf1, 0x70, 0x00
  };	/* dpt -> nop */
  static gdb_byte le_bp_entry[] = {
    0x00, 0x70, 0xf1, 0x10
  };	/* dpt -> nop */

  *size = kind;

  /* Determine appropriate breakpoint.  */
  if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
    return be_bp_entry;
  else
    {
      if (kind == 4)
	return le_bp_entry;
      else
	return le_bp_entry + 2;
    }
}

static const char * const m32r_register_names[] = {
  "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
  "r8", "r9", "r10", "r11", "r12", "fp", "lr", "sp",
  "psw", "cbr", "spi", "spu", "bpc", "pc", "accl", "acch",
  "evb"
};

static const char *
m32r_register_name (struct gdbarch *gdbarch, int reg_nr)
{
  static_assert (ARRAY_SIZE (m32r_register_names) == M32R_NUM_REGS);
  return m32r_register_names[reg_nr];
}


/* Return the GDB type object for the "standard" data type
   of data in register N.  */

static struct type *
m32r_register_type (struct gdbarch *gdbarch, int reg_nr)
{
  if (reg_nr == M32R_PC_REGNUM)
    return builtin_type (gdbarch)->builtin_func_ptr;
  else if (reg_nr == M32R_SP_REGNUM || reg_nr == M32R_FP_REGNUM)
    return builtin_type (gdbarch)->builtin_data_ptr;
  else
    return builtin_type (gdbarch)->builtin_int32;
}


/* Write into appropriate registers a function return value
   of type TYPE, given in virtual format.

   Things always get returned in RET1_REGNUM, RET2_REGNUM.  */

static void
m32r_store_return_value (struct type *type, struct regcache *regcache,
			 const gdb_byte *valbuf)
{
  struct gdbarch *gdbarch = regcache->arch ();
  enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
  CORE_ADDR regval;
  int len = type->length ();

  regval = extract_unsigned_integer (valbuf, len > 4 ? 4 : len, byte_order);
  regcache_cooked_write_unsigned (regcache, RET1_REGNUM, regval);

  if (len > 4)
    {
      regval = extract_unsigned_integer (valbuf + 4,
					 len - 4, byte_order);
      regcache_cooked_write_unsigned (regcache, RET1_REGNUM + 1, regval);
    }
}

/* This is required by skip_prologue.  The results of decoding a prologue
   should be cached because this thrashing is getting nuts.  */

static int
decode_prologue (struct gdbarch *gdbarch,
		 CORE_ADDR start_pc, CORE_ADDR scan_limit,
		 CORE_ADDR *pl_endptr, unsigned long *framelength)
{
  enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
  unsigned long framesize;
  int insn;
  int op1;
  CORE_ADDR after_prologue = 0;
  CORE_ADDR after_push = 0;
  CORE_ADDR after_stack_adjust = 0;
  CORE_ADDR current_pc;
  LONGEST return_value;

  framesize = 0;
  after_prologue = 0;

  for (current_pc = start_pc; current_pc < scan_limit; current_pc += 2)
    {
      /* Check if current pc's location is readable.  */
      if (!safe_read_memory_integer (current_pc, 2, byte_order, &return_value))
	return -1;

      insn = read_memory_unsigned_integer (current_pc, 2, byte_order);

      if (insn == 0x0000)
	break;

      /* If this is a 32 bit instruction, we dont want to examine its
	 immediate data as though it were an instruction.  */
      if (current_pc & 0x02)
	{
	  /* Decode this instruction further.  */
	  insn &= 0x7fff;
	}
      else
	{
	  if (insn & 0x8000)
	    {
	      if (current_pc == scan_limit)
		scan_limit += 2;	/* extend the search */

	      current_pc += 2;	/* skip the immediate data */

	      /* Check if current pc's location is readable.  */
	      if (!safe_read_memory_integer (current_pc, 2, byte_order,
					     &return_value))
		return -1;

	      if (insn == 0x8faf)	/* add3 sp, sp, xxxx */
		/* add 16 bit sign-extended offset */
		{
		  framesize +=
		    -((short) read_memory_unsigned_integer (current_pc,
							    2, byte_order));
		}
	      else
		{
		  if (((insn >> 8) == 0xe4) /* ld24 r4, xxxxxx; sub sp, r4 */
		      && safe_read_memory_integer (current_pc + 2,
						   2, byte_order,
						   &return_value)
		      && read_memory_unsigned_integer (current_pc + 2,
						       2, byte_order)
			 == 0x0f24)
		    {
		      /* Subtract 24 bit sign-extended negative-offset.  */
		      insn = read_memory_unsigned_integer (current_pc - 2,
							   4, byte_order);
		      if (insn & 0x00800000)	/* sign extend */
			insn |= 0xff000000;	/* negative */
		      else
			insn &= 0x00ffffff;	/* positive */
		      framesize += insn;
		    }
		}
	      after_push = current_pc + 2;
	      continue;
	    }
	}
      op1 = insn & 0xf000;	/* Isolate just the first nibble.  */

      if ((insn & 0xf0ff) == 0x207f)
	{			/* st reg, @-sp */
	  framesize += 4;
	  after_prologue = 0;
	  continue;
	}
      if ((insn >> 8) == 0x4f)	/* addi sp, xx */
	/* Add 8 bit sign-extended offset.  */
	{
	  int stack_adjust = (signed char) (insn & 0xff);

	  /* there are probably two of these stack adjustments:
	     1) A negative one in the prologue, and
	     2) A positive one in the epilogue.
	     We are only interested in the first one.  */

	  if (stack_adjust < 0)
	    {
	      framesize -= stack_adjust;
	      after_prologue = 0;
	      /* A frameless function may have no "mv fp, sp".
		 In that case, this is the end of the prologue.  */
	      after_stack_adjust = current_pc + 2;
	    }
	  continue;
	}
      if (insn == 0x1d8f)
	{			/* mv fp, sp */
	  after_prologue = current_pc + 2;
	  break;		/* end of stack adjustments */
	}

      /* Nop looks like a branch, continue explicitly.  */
      if (insn == 0x7000)
	{
	  after_prologue = current_pc + 2;
	  continue;		/* nop occurs between pushes.  */
	}
      /* End of prolog if any of these are trap instructions.  */
      if ((insn & 0xfff0) == 0x10f0)
	{
	  after_prologue = current_pc;
	  break;
	}
      /* End of prolog if any of these are branch instructions.  */
      if ((op1 == 0x7000) || (op1 == 0xb000) || (op1 == 0xf000))
	{
	  after_prologue = current_pc;
	  continue;
	}
      /* Some of the branch instructions are mixed with other types.  */
      if (op1 == 0x1000)
	{
	  int subop = insn & 0x0ff0;
	  if ((subop == 0x0ec0) || (subop == 0x0fc0))
	    {
	      after_prologue = current_pc;
	      continue;		/* jmp , jl */
	    }
	}
    }

  if (framelength)
    *framelength = framesize;

  if (current_pc >= scan_limit)
    {
      if (pl_endptr)
	{
	  if (after_stack_adjust != 0)
	    /* We did not find a "mv fp,sp", but we DID find
	       a stack_adjust.  Is it safe to use that as the
	       end of the prologue?  I just don't know.  */
	    {
	      *pl_endptr = after_stack_adjust;
	    }
	  else if (after_push != 0)
	    /* We did not find a "mv fp,sp", but we DID find
	       a push.  Is it safe to use that as the
	       end of the prologue?  I just don't know.  */
	    {
	      *pl_endptr = after_push;
	    }
	  else
	    /* We reached the end of the loop without finding the end
	       of the prologue.  No way to win -- we should report
	       failure.  The way we do that is to return the original
	       start_pc.  GDB will set a breakpoint at the start of
	       the function (etc.)  */
	    *pl_endptr = start_pc;
	}
      return 0;
    }

  if (after_prologue == 0)
    after_prologue = current_pc;

  if (pl_endptr)
    *pl_endptr = after_prologue;

  return 0;
}				/*  decode_prologue */

/* Function: skip_prologue
   Find end of function prologue.  */

#define DEFAULT_SEARCH_LIMIT 128

static CORE_ADDR
m32r_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
{
  enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
  CORE_ADDR func_addr, func_end;
  struct symtab_and_line sal;
  LONGEST return_value;

  /* See what the symbol table says.  */

  if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
    {
      sal = find_pc_line (func_addr, 0);

      if (sal.line != 0 && sal.end <= func_end)
	{
	  func_end = sal.end;
	}
      else
	/* Either there's no line info, or the line after the prologue is after
	   the end of the function.  In this case, there probably isn't a
	   prologue.  */
	{
	  func_end = std::min (func_end, func_addr + DEFAULT_SEARCH_LIMIT);
	}
    }
  else
    func_end = pc + DEFAULT_SEARCH_LIMIT;

  /* If pc's location is not readable, just quit.  */
  if (!safe_read_memory_integer (pc, 4, byte_order, &return_value))
    return pc;

  /* Find the end of prologue.  */
  if (decode_prologue (gdbarch, pc, func_end, &sal.end, NULL) < 0)
    return pc;

  return sal.end;
}

struct m32r_unwind_cache
{
  /* The previous frame's inner most stack address.  Used as this
     frame ID's stack_addr.  */
  CORE_ADDR prev_sp;
  /* The frame's base, optionally used by the high-level debug info.  */
  CORE_ADDR base;
  int size;
  /* How far the SP and r13 (FP) have been offset from the start of
     the stack frame (as defined by the previous frame's stack
     pointer).  */
  LONGEST sp_offset;
  LONGEST r13_offset;
  int uses_frame;
  /* Table indicating the location of each and every register.  */
  trad_frame_saved_reg *saved_regs;
};

/* Put here the code to store, into fi->saved_regs, the addresses of
   the saved registers of frame described by FRAME_INFO.  This
   includes special registers such as pc and fp saved in special ways
   in the stack frame.  sp is even more special: the address we return
   for it IS the sp for the next frame.  */

static struct m32r_unwind_cache *
m32r_frame_unwind_cache (frame_info_ptr this_frame,
			 void **this_prologue_cache)
{
  CORE_ADDR pc, scan_limit;
  ULONGEST prev_sp;
  ULONGEST this_base;
  unsigned long op;
  int i;
  struct m32r_unwind_cache *info;


  if ((*this_prologue_cache))
    return (struct m32r_unwind_cache *) (*this_prologue_cache);

  info = FRAME_OBSTACK_ZALLOC (struct m32r_unwind_cache);
  (*this_prologue_cache) = info;
  info->saved_regs = trad_frame_alloc_saved_regs (this_frame);

  info->size = 0;
  info->sp_offset = 0;
  info->uses_frame = 0;

  scan_limit = get_frame_pc (this_frame);
  for (pc = get_frame_func (this_frame);
       pc > 0 && pc < scan_limit; pc += 2)
    {
      if ((pc & 2) == 0)
	{
	  op = get_frame_memory_unsigned (this_frame, pc, 4);
	  if ((op & 0x80000000) == 0x80000000)
	    {
	      /* 32-bit instruction */
	      if ((op & 0xffff0000) == 0x8faf0000)
		{
		  /* add3 sp,sp,xxxx */
		  short n = op & 0xffff;
		  info->sp_offset += n;
		}
	      else if (((op >> 8) == 0xe4)
		       && get_frame_memory_unsigned (this_frame, pc + 2,
						     2) == 0x0f24)
		{
		  /* ld24 r4, xxxxxx; sub sp, r4 */
		  unsigned long n = op & 0xffffff;
		  info->sp_offset += n;
		  pc += 2;	/* skip sub instruction */
		}

	      if (pc == scan_limit)
		scan_limit += 2;	/* extend the search */
	      pc += 2;		/* skip the immediate data */
	      continue;
	    }
	}

      /* 16-bit instructions */
      op = get_frame_memory_unsigned (this_frame, pc, 2) & 0x7fff;
      if ((op & 0xf0ff) == 0x207f)
	{
	  /* st rn, @-sp */
	  int regno = ((op >> 8) & 0xf);
	  info->sp_offset -= 4;
	  info->saved_regs[regno].set_addr (info->sp_offset);
	}
      else if ((op & 0xff00) == 0x4f00)
	{
	  /* addi sp, xx */
	  int n = (signed char) (op & 0xff);
	  info->sp_offset += n;
	}
      else if (op == 0x1d8f)
	{
	  /* mv fp, sp */
	  info->uses_frame = 1;
	  info->r13_offset = info->sp_offset;
	  break;		/* end of stack adjustments */
	}
      else if ((op & 0xfff0) == 0x10f0)
	{
	  /* End of prologue if this is a trap instruction.  */
	  break;		/* End of stack adjustments.  */
	}
    }

  info->size = -info->sp_offset;

  /* Compute the previous frame's stack pointer (which is also the
     frame's ID's stack address), and this frame's base pointer.  */
  if (info->uses_frame)
    {
      /* The SP was moved to the FP.  This indicates that a new frame
	 was created.  Get THIS frame's FP value by unwinding it from
	 the next frame.  */
      this_base = get_frame_register_unsigned (this_frame, M32R_FP_REGNUM);
      /* The FP points at the last saved register.  Adjust the FP back
	 to before the first saved register giving the SP.  */
      prev_sp = this_base + info->size;
    }
  else
    {
      /* Assume that the FP is this frame's SP but with that pushed
	 stack space added back.  */
      this_base = get_frame_register_unsigned (this_frame, M32R_SP_REGNUM);
      prev_sp = this_base + info->size;
    }

  /* Convert that SP/BASE into real addresses.  */
  info->prev_sp = prev_sp;
  info->base = this_base;

  /* Adjust all the saved registers so that they contain addresses and
     not offsets.  */
  for (i = 0; i < gdbarch_num_regs (get_frame_arch (this_frame)) - 1; i++)
    if (info->saved_regs[i].is_addr ())
      info->saved_regs[i].set_addr (info->prev_sp
				    + info->saved_regs[i].addr ());

  /* The call instruction moves the caller's PC in the callee's LR.
     Since this is an unwind, do the reverse.  Copy the location of LR
     into PC (the address / regnum) so that a request for PC will be
     converted into a request for the LR.  */
  info->saved_regs[M32R_PC_REGNUM] = info->saved_regs[LR_REGNUM];

  /* The previous frame's SP needed to be computed.  Save the computed
     value.  */
  info->saved_regs[M32R_SP_REGNUM].set_value (prev_sp);

  return info;
}

static CORE_ADDR
m32r_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
		      struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
		      struct value **args, CORE_ADDR sp,
		      function_call_return_method return_method,
		      CORE_ADDR struct_addr)
{
  enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
  int stack_offset, stack_alloc;
  int argreg = ARG1_REGNUM;
  int argnum;
  struct type *type;
  enum type_code typecode;
  CORE_ADDR regval;
  gdb_byte *val;
  gdb_byte valbuf[M32R_ARG_REGISTER_SIZE];
  int len;

  /* First force sp to a 4-byte alignment.  */
  sp = sp & ~3;

  /* Set the return address.  For the m32r, the return breakpoint is
     always at BP_ADDR.  */
  regcache_cooked_write_unsigned (regcache, LR_REGNUM, bp_addr);

  /* If STRUCT_RETURN is true, then the struct return address (in
     STRUCT_ADDR) will consume the first argument-passing register.
     Both adjust the register count and store that value.  */
  if (return_method == return_method_struct)
    {
      regcache_cooked_write_unsigned (regcache, argreg, struct_addr);
      argreg++;
    }

  /* Now make sure there's space on the stack.  */
  for (argnum = 0, stack_alloc = 0; argnum < nargs; argnum++)
    stack_alloc += ((args[argnum]->type ()->length () + 3) & ~3);
  sp -= stack_alloc;		/* Make room on stack for args.  */

  for (argnum = 0, stack_offset = 0; argnum < nargs; argnum++)
    {
      type = args[argnum]->type ();
      typecode = type->code ();
      len = type->length ();

      memset (valbuf, 0, sizeof (valbuf));

      /* Passes structures that do not fit in 2 registers by reference.  */
      if (len > 8
	  && (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
	{
	  store_unsigned_integer (valbuf, 4, byte_order,
				  args[argnum]->address ());
	  typecode = TYPE_CODE_PTR;
	  len = 4;
	  val = valbuf;
	}
      else if (len < 4)
	{
	  /* Value gets right-justified in the register or stack word.  */
	  memcpy (valbuf + (register_size (gdbarch, argreg) - len),
		  (gdb_byte *) args[argnum]->contents ().data (), len);
	  val = valbuf;
	}
      else
	val = (gdb_byte *) args[argnum]->contents ().data ();

      while (len > 0)
	{
	  if (argreg > ARGN_REGNUM)
	    {
	      /* Must go on the stack.  */
	      write_memory (sp + stack_offset, val, 4);
	      stack_offset += 4;
	    }
	  else if (argreg <= ARGN_REGNUM)
	    {
	      /* There's room in a register.  */
	      regval =
		extract_unsigned_integer (val,
					  register_size (gdbarch, argreg),
					  byte_order);
	      regcache_cooked_write_unsigned (regcache, argreg++, regval);
	    }

	  /* Store the value 4 bytes at a time.  This means that things
	     larger than 4 bytes may go partly in registers and partly
	     on the stack.  */
	  len -= register_size (gdbarch, argreg);
	  val += register_size (gdbarch, argreg);
	}
    }

  /* Finally, update the SP register.  */
  regcache_cooked_write_unsigned (regcache, M32R_SP_REGNUM, sp);

  return sp;
}


/* Given a return value in `regbuf' with a type `valtype', 
   extract and copy its value into `valbuf'.  */

static void
m32r_extract_return_value (struct type *type, struct regcache *regcache,
			   gdb_byte *dst)
{
  struct gdbarch *gdbarch = regcache->arch ();
  enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
  int len = type->length ();
  ULONGEST tmp;

  /* By using store_unsigned_integer we avoid having to do
     anything special for small big-endian values.  */
  regcache_cooked_read_unsigned (regcache, RET1_REGNUM, &tmp);
  store_unsigned_integer (dst, (len > 4 ? len - 4 : len), byte_order, tmp);

  /* Ignore return values more than 8 bytes in size because the m32r
     returns anything more than 8 bytes in the stack.  */
  if (len > 4)
    {
      regcache_cooked_read_unsigned (regcache, RET1_REGNUM + 1, &tmp);
      store_unsigned_integer (dst + len - 4, 4, byte_order, tmp);
    }
}

static enum return_value_convention
m32r_return_value (struct gdbarch *gdbarch, struct value *function,
		   struct type *valtype, struct regcache *regcache,
		   gdb_byte *readbuf, const gdb_byte *writebuf)
{
  if (valtype->length () > 8)
    return RETURN_VALUE_STRUCT_CONVENTION;
  else
    {
      if (readbuf != NULL)
	m32r_extract_return_value (valtype, regcache, readbuf);
      if (writebuf != NULL)
	m32r_store_return_value (valtype, regcache, writebuf);
      return RETURN_VALUE_REGISTER_CONVENTION;
    }
}

/* Given a GDB frame, determine the address of the calling function's
   frame.  This will be used to create a new GDB frame struct.  */

static void
m32r_frame_this_id (frame_info_ptr this_frame,
		    void **this_prologue_cache, struct frame_id *this_id)
{
  struct m32r_unwind_cache *info
    = m32r_frame_unwind_cache (this_frame, this_prologue_cache);
  CORE_ADDR base;
  CORE_ADDR func;
  struct bound_minimal_symbol msym_stack;
  struct frame_id id;

  /* The FUNC is easy.  */
  func = get_frame_func (this_frame);

  /* Check if the stack is empty.  */
  msym_stack = lookup_minimal_symbol ("_stack", NULL, NULL);
  if (msym_stack.minsym && info->base == msym_stack.value_address ())
    return;

  /* Hopefully the prologue analysis either correctly determined the
     frame's base (which is the SP from the previous frame), or set
     that base to "NULL".  */
  base = info->prev_sp;
  if (base == 0)
    return;

  id = frame_id_build (base, func);
  (*this_id) = id;
}

static struct value *
m32r_frame_prev_register (frame_info_ptr this_frame,
			  void **this_prologue_cache, int regnum)
{
  struct m32r_unwind_cache *info
    = m32r_frame_unwind_cache (this_frame, this_prologue_cache);
  return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
}

static const struct frame_unwind m32r_frame_unwind = {
  "m32r prologue",
  NORMAL_FRAME,
  default_frame_unwind_stop_reason,
  m32r_frame_this_id,
  m32r_frame_prev_register,
  NULL,
  default_frame_sniffer
};

static CORE_ADDR
m32r_frame_base_address (frame_info_ptr this_frame, void **this_cache)
{
  struct m32r_unwind_cache *info
    = m32r_frame_unwind_cache (this_frame, this_cache);
  return info->base;
}

static const struct frame_base m32r_frame_base = {
  &m32r_frame_unwind,
  m32r_frame_base_address,
  m32r_frame_base_address,
  m32r_frame_base_address
};

static gdbarch_init_ftype m32r_gdbarch_init;

static struct gdbarch *
m32r_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
{
  /* If there is already a candidate, use it.  */
  arches = gdbarch_list_lookup_by_info (arches, &info);
  if (arches != NULL)
    return arches->gdbarch;

  /* Allocate space for the new architecture.  */
  gdbarch *gdbarch
    = gdbarch_alloc (&info, gdbarch_tdep_up (new m32r_gdbarch_tdep));

  set_gdbarch_wchar_bit (gdbarch, 16);
  set_gdbarch_wchar_signed (gdbarch, 0);

  set_gdbarch_num_regs (gdbarch, M32R_NUM_REGS);
  set_gdbarch_pc_regnum (gdbarch, M32R_PC_REGNUM);
  set_gdbarch_sp_regnum (gdbarch, M32R_SP_REGNUM);
  set_gdbarch_register_name (gdbarch, m32r_register_name);
  set_gdbarch_register_type (gdbarch, m32r_register_type);

  set_gdbarch_push_dummy_call (gdbarch, m32r_push_dummy_call);
  set_gdbarch_return_value (gdbarch, m32r_return_value);

  set_gdbarch_skip_prologue (gdbarch, m32r_skip_prologue);
  set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
  set_gdbarch_breakpoint_kind_from_pc (gdbarch, m32r_breakpoint_kind_from_pc);
  set_gdbarch_sw_breakpoint_from_kind (gdbarch, m32r_sw_breakpoint_from_kind);
  set_gdbarch_memory_insert_breakpoint (gdbarch,
					m32r_memory_insert_breakpoint);
  set_gdbarch_memory_remove_breakpoint (gdbarch,
					m32r_memory_remove_breakpoint);

  set_gdbarch_frame_align (gdbarch, m32r_frame_align);

  frame_base_set_default (gdbarch, &m32r_frame_base);

  /* Hook in ABI-specific overrides, if they have been registered.  */
  gdbarch_init_osabi (info, gdbarch);

  /* Hook in the default unwinders.  */
  frame_unwind_append_unwinder (gdbarch, &m32r_frame_unwind);

  /* Support simple overlay manager.  */
  set_gdbarch_overlay_update (gdbarch, simple_overlay_update);

  return gdbarch;
}

void _initialize_m32r_tdep ();
void
_initialize_m32r_tdep ()
{
  gdbarch_register (bfd_arch_m32r, m32r_gdbarch_init);
}