# Copyright (C) 2014-2026 Free Software Foundation, Inc.
#
# Copying and distribution of this file, with or without modification,
# are permitted in any medium without royalty provided the copyright
# notice and this notice are preserved.
#
# Unusual variables checked by this code:
#	NOP - four byte opcode for no-op (defaults to none)
#	NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
#		empty.
#	HAVE_NOINIT - Include a .noinit output section in the script.
#	HAVE_PERSISTENT - Include a .persistent output section in the script.
#	HAVE_DT_RELR - Include a .relr.dyn output section in the script.
#	SMALL_DATA_CTOR - .ctors contains small data.
#	SMALL_DATA_DTOR - .dtors contains small data.
#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
#	INITIAL_READONLY_SECTIONS - at start of text segment
#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
#		(e.g., .PARISC.milli)
#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
#	INITIAL_READWRITE_SECTIONS - at start of data segment (after relro)
#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
#		(e.g., .PARISC.global)
#	OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
#		(e.g. PPC32 .fixup, .got[12])
#	OTHER_RELRO_SECTIONS_2 - as above, but after .dynamic in text segment
#	OTHER_BSS_SECTIONS - other than .bss .sbss ...
#	ATTRS_SECTIONS - at the end
#	OTHER_SECTIONS - at the end
#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
#		executable (e.g., _DYNAMIC_LINK)
#       TEXT_START_ADDR - the first byte of the text segment, after any
#               headers.
#       TEXT_BASE_ADDRESS - the first byte of the text segment.
#	TEXT_START_SYMBOLS - symbols that appear at the start of the
#		.text section.
#	DATA_START_SYMBOLS - symbols that appear at the start of the
#		.data section.
#	DATA_END_SYMBOLS - symbols that appear at the end of the
#		writeable data sections.
#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
#	OTHER_GOT_SECTIONS - sections just after .got.
#	OTHER_PLT_SECTIONS - sections just after .plt.
#	OTHER_SDATA_SECTIONS - sections just after .sdata.
#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
#		.bss section besides __bss_start.
#	PLT_NEXT_DATA - .plt next to data segment when .plt is in text segment.
#	DATA_PLT - .plt should be in data segment, not text segment.
#	PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
#	BSS_PLT - .plt should be in bss segment
#	NO_REL_RELOCS - Don't include .rel.* sections in script
#	NO_RELA_RELOCS - Don't include .rela.* sections in script
#	NON_ALLOC_DYN - Place dynamic sections after data segment.
#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
#	EMBEDDED - whether this is for an embedded system.
#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
#		start address of shared library.
#	INPUT_FILES - INPUT command of files to always include
#	WRITABLE_RODATA - if set, the .rodata section should be writable
#	INIT_START, INIT_END -  statements just before and just after
#	combination of .init sections.
#	FINI_START, FINI_END - statements just before and just after
#	combination of .fini sections.
#	STACK_ADDR - start of a .stack section.
#	OTHER_SYMBOLS - symbols to place right at the end of the script.
#	ETEXT_NAME - name of a symbol for the end of the text section,
#		normally etext.
#	ETEXT_LAST_IN_RODATA_SEGMENT - emit ETEXT_NAME after all sections in
#		the read-only data segment (which may or may not be equal to
#		the code segment), instead of after just the code parts.
#	SEPARATE_CODE - if set, .text and similar sections containing
#		actual machine instructions must be in wholly disjoint
#		pages from any other data, including headers
#	SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
#		so that .got can be in the RELRO area.  It should be set to
#		the number of bytes in the beginning of .got.plt which can be
#		in the RELRO area as well.
#	USER_LABEL_PREFIX - prefix to add to user-visible symbols.
#	RODATA_NAME, SDATA_NAME, SBSS_NAME, BSS_NAME - base parts of names
#		for standard sections, without initial "." or suffixes.
#       SYMBOL_ABI_ALIGNMENT - minimum alignment in bytes which needs to be
#               applied to every symbol definition
#       ALL_TEXT_BEFORE_RO - put all code sections before read-only
#               sections
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
#

#  Many sections come in three flavours.  There is the 'real' section,
#  like ".data".  Then there are the per-procedure or per-variable
#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
#  and useful for --gc-sections, which for a variable "foo" might be
#  ".data.foo".  Then there are the linkonce sections, for which the linker
#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
#  The exact correspondences are:
#
#  Section	Linkonce section
#  .text	.gnu.linkonce.t.foo
#  .rodata	.gnu.linkonce.r.foo
#  .data	.gnu.linkonce.d.foo
#  .bss		.gnu.linkonce.b.foo
#  .sdata	.gnu.linkonce.s.foo
#  .sbss	.gnu.linkonce.sb.foo
#  .sdata2	.gnu.linkonce.s2.foo
#  .sbss2	.gnu.linkonce.sb2.foo
#  .debug_info	.gnu.linkonce.wi.foo
#  .tdata	.gnu.linkonce.td.foo
#  .tbss	.gnu.linkonce.tb.foo
#  .lrodata	.gnu.linkonce.lr.foo
#  .ldata	.gnu.linkonce.l.foo
#  .lbss	.gnu.linkonce.lb.foo
#  .noinit	.gnu.linkonce.n.foo
#  .persistent	.gnu.linkonce.p.foo
#
#  Each of these can also have corresponding .rel.* and .rela.* sections.

# ------------------------------------------------------------------------
# The multiple forms of conditional shell script syntax that are used in
# this file can be confusing, so here is a quick explanation of how they
# work:
#
# The following all mean "if foo is defined then do/insert <stuff>":
#
#    test -z "$foo" || <stuff> 
#    test -n "$foo" && <stuff>
#    if test -n "$foo"; then <stuff>
#    if [ -n "$foo" ]; then <stuff>
#    ${foo-<stuff>}
#
# Whereas the following all mean "if foo is undefined then do/insert <stuff>":
#
#    test -n "$foo" || <stuff>
#    test -z "$foo" && <stuff>
#    if test -z "$foo"; then <stuff>
#    if [ -z "$foo" ]; then <stuff>
#    ${foo+<stuff>}
#
# If multiple symbols are tested together then they operate as an IOR for
# positive tests and a NOR for negative tests.  ie, the following all do
# <stuff> if either or both of <foo> and <bar> are defined:
#
#    test -z "$foo$bar" || <stuff> 
#    test -n "$foo$bar" && <stuff>
#    if test -n "$foo$bar"; then <stuff>
#
# Whilst the following only do <stuff> if neither <foo> nor <bar> are defined:
#
#    test -n "$foo$bar" || <stuff>
#    if -z "$foo$bar"; then <stuff>
#    test -z "$foo$bar" && <stuff>
#
# Also:
#   foo=${foo-${bar-${baz}}}
# means:
#   If foo is defined, leave it unchanged.  Otherwise if bar is defined
#   then set foo equal to bar, otherwise set foo equal to baz.
# ------------------------------------------------------------------------

if test -n "$NOP"; then
  FILL="=$NOP"
else
  FILL=
fi

test -n "$CREATE_SHLIB$CREATE_PIE" && CREATE_PIC=" "
test -z "$RODATA_NAME" && RODATA_NAME=rodata
test -z "$SDATA_NAME" && SDATA_NAME=sdata
test -z "$SBSS_NAME" && SBSS_NAME=sbss
test -z "$BSS_NAME" && BSS_NAME=bss
test -z "$ENTRY" && ENTRY=${USER_LABEL_PREFIX}_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
test -z "${ETEXT_NAME}" && ETEXT_NAME=${USER_LABEL_PREFIX}etext
test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"

if test -z "$DATA_SEGMENT_ALIGN"; then
  test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
  test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
  DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
  DATA_SEGMENT_RELRO_END=""
  DATA_SEGMENT_END=""
  if test -n "${COMMONPAGESIZE}"; then
    if test "${SEGMENT_SIZE}" != "${MAXPAGESIZE}"; then
      DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); \
      . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
    else
      DATA_SEGMENT_ALIGN="DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
    fi
    DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
    DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
  fi
fi

if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
  INITIAL_READONLY_SECTIONS=".interp       ${RELOCATING-0} : { *(.interp) }"
fi

if test -z "$PLT"; then
  IPLT=".iplt         ${RELOCATING-0} : { *(.iplt) }"
  PLT=".plt          ${RELOCATING-0} : { *(.plt)${RELOCATING+${IREL_IN_PLT+ *(.iplt)}} }
  ${IREL_IN_PLT-$IPLT}"
fi

test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=

if test -z "$GOT"; then
  if test -z "$SEPARATE_GOTPLT"; then
    GOT=".got          ${RELOCATING-0} : {${RELOCATING+ *(.got.plt) *(.igot.plt)} *(.got)${RELOCATING+ *(.igot)} }"
  else
    GOT=".got          ${RELOCATING-0} : { *(.got)${RELOCATING+ *(.igot)} }"
    GOTPLT=".got.plt      ${RELOCATING-0} : { *(.got.plt)${RELOCATING+ *(.igot.plt)} }"
  fi
fi

def_symbol()
{
    if [ -z "${SYMBOL_ABI_ALIGNMENT}" ]; then
	echo "${USER_LABEL_PREFIX}$1 = ."
    else
	echo "${USER_LABEL_PREFIX}$1 = ALIGN(${SYMBOL_ABI_ALIGNMENT})"
    fi
}

REL_IFUNC=".rel.ifunc    ${RELOCATING-0} : { *(.rel.ifunc) }"
RELA_IFUNC=".rela.ifunc   ${RELOCATING-0} : { *(.rela.ifunc) }"
REL_IPLT=".rel.iplt     ${RELOCATING-0} :
    {
      ${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN ($(def_symbol "__rel_iplt_start"));}}
      *(.rel.iplt)
      ${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN ($(def_symbol "__rel_iplt_end"));}}
    }"
RELA_IPLT=".rela.iplt    ${RELOCATING-0} :
    {
      ${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN ($(def_symbol "__rela_iplt_start"));}}
      *(.rela.iplt)
      ${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN ($(def_symbol "__rela_iplt_end"));}}
    }"
DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".${RODATA_NAME}       ${RELOCATING-0} : { *(.${RODATA_NAME}${RELOCATING+ .${RODATA_NAME}.* .gnu.linkonce.r.*}) }"
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) *(.gnu_object_only) }"
if test -z "${NO_SMALL_DATA}"; then
  SBSS=".${SBSS_NAME}         ${RELOCATING-0} :
  {
    ${RELOCATING+${SBSS_START_SYMBOLS}}
    ${CREATE_SHLIB+*(.${SBSS_NAME}2 .${SBSS_NAME}2.* .gnu.linkonce.sb2.*)}
    ${RELOCATING+*(.dyn${SBSS_NAME})}
    *(.${SBSS_NAME}${RELOCATING+ .${SBSS_NAME}.* .gnu.linkonce.sb.*})
    ${RELOCATING+*(.scommon)}
    ${RELOCATING+${SBSS_END_SYMBOLS}}
  }"
  SBSS2=".${SBSS_NAME}2        ${RELOCATING-0} : { *(.${SBSS_NAME}2${RELOCATING+ .${SBSS_NAME}2.* .gnu.linkonce.sb2.*}) }"
  SDATA="/* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
  .${SDATA_NAME}        ${RELOCATING-0} :
  {
    ${RELOCATING+${SDATA_START_SYMBOLS}}
    ${CREATE_SHLIB+*(.${SDATA_NAME}2 .${SDATA_NAME}2.* .gnu.linkonce.s2.*)}
    *(.${SDATA_NAME}${RELOCATING+ .${SDATA_NAME}.* .gnu.linkonce.s.*})
  }"
  SDATA2=".${SDATA_NAME}2       ${RELOCATING-0} :
  {
    ${RELOCATING+${SDATA2_START_SYMBOLS}}
    *(.${SDATA_NAME}2${RELOCATING+ .${SDATA_NAME}2.* .gnu.linkonce.s2.*})
  }"
  REL_SDATA=".rel.${SDATA_NAME}    ${RELOCATING-0} : { *(.rel.${SDATA_NAME}${RELOCATING+ .rel.${SDATA_NAME}.* .rel.gnu.linkonce.s.*}) }
  .rela.${SDATA_NAME}   ${RELOCATING-0} : { *(.rela.${SDATA_NAME}${RELOCATING+ .rela.${SDATA_NAME}.* .rela.gnu.linkonce.s.*}) }"
  REL_SBSS=".rel.${SBSS_NAME}     ${RELOCATING-0} : { *(.rel.${SBSS_NAME}${RELOCATING+ .rel.${SBSS_NAME}.* .rel.gnu.linkonce.sb.*}) }
  .rela.${SBSS_NAME}    ${RELOCATING-0} : { *(.rela.${SBSS_NAME}${RELOCATING+ .rela.${SBSS_NAME}.* .rela.gnu.linkonce.sb.*}) }"
  REL_SDATA2=".rel.${SDATA_NAME}2   ${RELOCATING-0} : { *(.rel.${SDATA_NAME}2${RELOCATING+ .rel.${SDATA_NAME}2.* .rel.gnu.linkonce.s2.*}) }
  .rela.${SDATA_NAME}2  ${RELOCATING-0} : { *(.rela.${SDATA_NAME}2${RELOCATING+ .rela.${SDATA_NAME}2.* .rela.gnu.linkonce.s2.*}) }"
  REL_SBSS2=".rel.${SBSS_NAME}2    ${RELOCATING-0} : { *(.rel.${SBSS_NAME}2${RELOCATING+ .rel.${SBSS_NAME}2.* .rel.gnu.linkonce.sb2.*}) }
  .rela.${SBSS_NAME}2   ${RELOCATING-0} : { *(.rela.${SBSS_NAME}2${RELOCATING+ .rela.${SBSS_NAME}2.* .rela.gnu.linkonce.sb2.*}) }"
else
  NO_SMALL_DATA=" "
fi

if test -z "${SDATA_GOT}${DATA_GOT}"; then
  if test -n "${NO_SMALL_DATA}"; then
    DATA_GOT=" "
  fi
fi

if test -z "${SDATA_GOT}${DATA_GOT}"; then
  if test -z "${NO_SMALL_DATA}"; then
    SDATA_GOT=" "
  fi
fi

test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "

test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
  .rel.ldata    ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
  .rela.ldata   ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
  .rel.lbss     ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
  .rela.lbss    ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
  .rel.lrodata  ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
  .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"

if test "${ENABLE_INITFINI_ARRAY}" = "yes"; then
  SORT_INIT_ARRAY="KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))"
  SORT_FINI_ARRAY="KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))"
  CTORS_IN_INIT_ARRAY="EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors"
  DTORS_IN_FINI_ARRAY="EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors"
else
  SORT_INIT_ARRAY="KEEP (*(SORT(.init_array.*)))"
  SORT_FINI_ARRAY="KEEP (*(SORT(.fini_array.*)))"
  CTORS_IN_INIT_ARRAY=
  DTORS_IN_FINI_ARRAY=
fi
CTOR=".ctors        ${CONSTRUCTING-0} :
  {
    ${CONSTRUCTING+${CTOR_START}}
    /* gcc uses crtbegin.o to find the start of
       the constructors, so we make sure it is
       first.  Because this is a wildcard, it
       doesn't matter if the user does not
       actually link against crtbegin.o; the
       linker won't look for a file to match a
       wildcard.  The wildcard also means that it
       doesn't matter which directory crtbegin.o
       is in.  */

    KEEP (*crtbegin.o(.ctors))
    KEEP (*crtbegin?.o(.ctors))

    /* We don't want to include the .ctor section from
       the crtend.o file until after the sorted ctors.
       The .ctor section from the crtend file contains the
       end of ctors marker and it must be last */

    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(.ctors))
    ${CONSTRUCTING+${CTOR_END}}
  }"
DTOR=".dtors        ${CONSTRUCTING-0} :
  {
    ${CONSTRUCTING+${DTOR_START}}
    KEEP (*crtbegin.o(.dtors))
    KEEP (*crtbegin?.o(.dtors))
    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(.dtors))
    ${CONSTRUCTING+${DTOR_END}}
  }"

TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${TEXT_START_ADDR})"
SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${SHLIB_TEXT_START_ADDR:-0})"

# Don't bother with separate code segment when there are data sections
# between .plt and .text.
if test -z "$TINY_READONLY_SECTION"; then
  case "$LD_FLAG" in
    *ro*textonly*)
      ALL_TEXT_BEFORE_RO=" "
      SEPARATE_TEXT=" "
      TEXT_SEGMENT_ALIGN=". = ALIGN(${MAXPAGESIZE});"
      ;;
    *textonly*)
      SEPARATE_TEXT=" "
      TEXT_SEGMENT_ALIGN=". = ALIGN(${MAXPAGESIZE});"
      ;;
  esac
fi

if [ -z "$SEPARATE_CODE" ]; then
  SIZEOF_HEADERS_CODE=" + SIZEOF_HEADERS"
else
  SIZEOF_HEADERS_CODE=
fi

# If this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}${SIZEOF_HEADERS_CODE}"
else
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
fi

# ===========================================================================
# Functions for generating parts of the linker script

# Helper function for putting comments into scripts.
# Useful when trying to track down script composition problems.
# Use by adding:
#   emit_comment "a message"
# wherever necessary.

emit_comment()
{
cat <<EOF
  /* $1 */
EOF
}

align_to_default_symbol_alignment()
{
cat <<EOF
  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
EOF
}

align_to_default_section_alignment()
{
cat <<EOF
  ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
EOF
}

emit_header()
{
cat <<EOF
/* Copyright (C) 2014-2026 Free Software Foundation, Inc.

   Copying and distribution of this script, with or without modification,
   are permitted in any medium without royalty provided the copyright
   notice and this notice are preserved.  */

OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", "${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
${RELOCATING+ENTRY(${ENTRY})}

${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+${CREATE_SHLIB-${EXECUTABLE_SYMBOLS}}}
${RELOCATING+${INPUT_FILES}}
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
  if gld -r is used and the intermediate file has sections starting
  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
  bug.  But for now assigning the zero vmas works.  */}
EOF
}

emit_early_ro()
{
cat <<EOF
  ${INITIAL_READONLY_SECTIONS}
EOF
}

emit_noinit()
{
  if test "${HAVE_NOINIT}" != "yes"; then
    return
  fi
cat <<EOF  
  /* This section contains data that is not initialized during load,
     or during the application's initialization sequence.  */
  .noinit ${RELOCATING-0} (NOLOAD) : ${RELOCATING+ALIGN(${ALIGNMENT})}
  {
    ${RELOCATING+PROVIDE (__noinit_start = .);}
    *(.noinit${RELOCATING+ .noinit.* .gnu.linkonce.n.*})
    $(align_to_default_symbol_alignment)
    ${RELOCATING+PROVIDE (__noinit_end = .);}
  }
EOF
}

emit_persistent()
{
  if test "${HAVE_PERSISTENT}" != "yes"; then
    return
  fi
cat <<EOF    
  /* This section contains data that is initialized during load,
     but not during the application's initialization sequence.  */
  .persistent ${RELOCATING-0} : ${RELOCATING+ALIGN(${ALIGNMENT})}
  {
    ${RELOCATING+PROVIDE (__persistent_start = .);}
    *(.persistent${RELOCATING+ .persistent.* .gnu.linkonce.p.*})
    $(align_to_default_symbol_alignment)
    ${RELOCATING+PROVIDE (__persistent_end = .);}
  }
EOF
}

emit_executable_start()
{
cat <<EOF
  ${RELOCATING+${SEPARATE_TEXT-/* Read-only sections, merged into text segment: */}}

  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR});
  . = ${TEXT_BASE_ADDRESS};}}}

  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR}${SIZEOF_HEADERS_CODE};}}

  ${CREATE_PIE+${RELOCATING+PROVIDE (__executable_start = ${SHLIB_TEXT_START_ADDR});
  . = ${SHLIB_TEXT_START_ADDR}${SIZEOF_HEADERS_CODE};}}

  /* Place the build-id as close to the ELF headers as possible.  This
     maximises the chance the build-id will be present in core files,
     which GDB can then use to locate the associated debuginfo file.  */
  .note.gnu.build-id ${RELOCATING-0}: { *(.note.gnu.build-id) }
EOF
}

emit_dyn()
{
  test -n "${RELOCATING+0}" || unset NON_ALLOC_DYN
  test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC=

cat > ldscripts/dyntmp.$$ <<EOF
  ${TEXT_DYNAMIC+${DYNAMIC}}
  .hash         ${RELOCATING-0} : { *(.hash) }
  .gnu.hash     ${RELOCATING-0} : { *(.gnu.hash) }
  .dynsym       ${RELOCATING-0} : { *(.dynsym) }
  .dynstr       ${RELOCATING-0} : { *(.dynstr) }
  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
EOF

if [ "x$COMBRELOC" = x ]; then
  COMBRELOCCAT="cat >> ldscripts/dyntmp.$$"
else
  COMBRELOCCAT="cat > $COMBRELOC"
fi

eval $COMBRELOCCAT <<EOF
  ${INITIAL_RELOC_SECTIONS}
  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
  .rel.${RODATA_NAME}   ${RELOCATING-0} : { *(.rel.${RODATA_NAME}${RELOCATING+ .rel.${RODATA_NAME}.* .rel.gnu.linkonce.r.*}) }
  .rela.${RODATA_NAME}  ${RELOCATING-0} : { *(.rela.${RODATA_NAME}${RELOCATING+ .rela.${RODATA_NAME}.* .rela.gnu.linkonce.r.*}) }
  ${OTHER_READONLY_RELOC_SECTIONS}
  .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*}) }
  .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*}) }
  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
  ${OTHER_READWRITE_RELOC_SECTIONS}
  .rel.tdata	${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
  .rela.tdata	${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
  .rel.tbss	${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
  .rela.tbss	${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
  ${OTHER_GOT_RELOC_SECTIONS}
  ${REL_SDATA}
  ${REL_SBSS}
  ${REL_SDATA2}
  ${REL_SBSS2}
  .rel.${BSS_NAME}      ${RELOCATING-0} : { *(.rel.${BSS_NAME}${RELOCATING+ .rel.${BSS_NAME}.* .rel.gnu.linkonce.b.*}) }
  .rela.${BSS_NAME}     ${RELOCATING-0} : { *(.rela.${BSS_NAME}${RELOCATING+ .rela.${BSS_NAME}.* .rela.gnu.linkonce.b.*}) }
  ${REL_LARGE}
  ${IREL_IN_PLT+$REL_IFUNC}
  ${IREL_IN_PLT+$RELA_IFUNC}
  ${IREL_IN_PLT-$REL_IPLT}
  ${IREL_IN_PLT-$RELA_IPLT}
EOF

if [ -n "$COMBRELOC" ]; then
cat >> ldscripts/dyntmp.$$ <<EOF
  .rel.dyn      ${RELOCATING-0} :
    {
EOF

sed -e '/^[	 ]*[{}][	 ]*$/d;/:[	 ]*$/d;/\.rela\./d;/__rela_iplt_/d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC >> ldscripts/dyntmp.$$

cat >> ldscripts/dyntmp.$$ <<EOF
    }
  .rela.dyn     ${RELOCATING-0} :
    {
EOF

sed -e '/^[	 ]*[{}][	 ]*$/d;/:[	 ]*$/d;/\.rel\./d;/__rel_iplt_/d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC >> ldscripts/dyntmp.$$

cat >> ldscripts/dyntmp.$$ <<EOF
    }
EOF

fi

cat >> ldscripts/dyntmp.$$ <<EOF
  .rel.plt      ${RELOCATING-0} :
    {
      *(.rel.plt)
      ${IREL_IN_PLT+${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN ($(def_symbol "__rel_iplt_start"));}}}
      ${IREL_IN_PLT+${RELOCATING+*(.rel.iplt)}}
      ${IREL_IN_PLT+${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN ($(def_symbol "__rel_iplt_end"));}}}
    }
  .rela.plt     ${RELOCATING-0} :
    {
      *(.rela.plt)
      ${IREL_IN_PLT+${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN ($(def_symbol "__rela_iplt_start"));}}}
      ${IREL_IN_PLT+${RELOCATING+*(.rela.iplt)}}
      ${IREL_IN_PLT+${RELOCATING+${CREATE_PIC-PROVIDE_HIDDEN ($(def_symbol "__rela_iplt_end"));}}}
    }
  ${OTHER_PLT_RELOC_SECTIONS}
EOF

  if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then
    cat ldscripts/dyntmp.$$
  else
    if test -z "${NO_REL_RELOCS}"; then
      sed -e '/^[	 ]*\.rela\.[^}]*$/,/}/d;/^[	 ]*\.rela\./d;/__rela_iplt_/d' ldscripts/dyntmp.$$
    fi
    if test -z "${NO_RELA_RELOCS}"; then
      sed -e '/^[	 ]*\.rel\.[^}]*$/,/}/d;/^[	 ]*\.rel\./d;/__rel_iplt_/d' ldscripts/dyntmp.$$
    fi
  fi
  
  rm -f ldscripts/dyntmp.$$

  if test -n "${HAVE_DT_RELR}"; then
    echo "  .relr.dyn : { *(.relr.dyn) }"
  fi
}

align_text()
{
  if test -n "$TEXT_SEGMENT_ALIGN"; then
cat <<EOF
  ${RELOCATING+/* Align the text segment.  */}
  ${RELOCATING+${TEXT_SEGMENT_ALIGN}}
EOF
fi
}

emit_text()
{
cat <<EOF
  /* Start of the executable code region.  */
  .init         ${RELOCATING-0}${RELOCATING+${INIT_ADDR}} :
  {
    ${RELOCATING+${INIT_START}}
    KEEP (*(SORT_NONE(.init)))
    ${RELOCATING+${INIT_END}}
  } ${FILL}

  ${TEXT_PLT+${PLT_NEXT_DATA-${PLT} ${OTHER_PLT_SECTIONS}}}
  
  ${TINY_READONLY_SECTION}
  
  .text         ${RELOCATING-0} :
  {
    ${RELOCATING+${TEXT_START_SYMBOLS}}
    ${RELOCATING+*(.text.unlikely .text.*_unlikely .text.unlikely.*)}
    ${RELOCATING+*(.text.exit .text.exit.*)}
    ${RELOCATING+*(.text.startup .text.startup.*)}
    ${RELOCATING+*(.text.hot .text.hot.*)}
    ${RELOCATING+*(SORT(.text.sorted.*))}
    *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
    /* .gnu.warning sections are handled specially by elf.em.  */
    *(.gnu.warning)
    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
  } ${FILL}
  
  .fini         ${RELOCATING-0}${RELOCATING+${FINI_ADDR}} :
  {
    ${RELOCATING+${FINI_START}}
    KEEP (*(SORT_NONE(.fini)))
    ${RELOCATING+${FINI_END}}
  } ${FILL}
EOF
}

emit_text_end_symbols()
{
cat <<EOF
  ${RELOCATING+${ETEXT_LAST_IN_RODATA_SEGMENT-PROVIDE (__${ETEXT_NAME} = .);}}
  ${RELOCATING+${ETEXT_LAST_IN_RODATA_SEGMENT-PROVIDE (_${ETEXT_NAME} = .);}}
  ${RELOCATING+${ETEXT_LAST_IN_RODATA_SEGMENT-PROVIDE (${ETEXT_NAME} = .);}}
EOF
}

align_rodata()
{
cat <<EOF
  /* Start of the Read Only Data region.  */
EOF

if test -n "${SEPARATE_CODE}${SEPARATE_TEXT}"; then

  if test -n "${RODATA_ADDR}"; then
    RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR}) + SIZEOF_HEADERS"
  else
    RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
    RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${RODATA_ADDR})"
  fi
  
  if test -n "${SHLIB_RODATA_ADDR}"; then
    SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR}) + SIZEOF_HEADERS"
  else
    SHLIB_RODATA_ADDR="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
    SHLIB_RODATA_ADDR="SEGMENT_START(\"rodata-segment\", ${SHLIB_RODATA_ADDR})"
  fi
  
cat <<EOF
  ${RELOCATING+/* Adjust the address for the rodata segment.  We want to adjust up to
     the same address within the page on the next page up.  */
  ${CREATE_SHLIB-${CREATE_PIE-. = ${RODATA_ADDR};}}
  ${CREATE_SHLIB+. = ${SHLIB_RODATA_ADDR};}
  ${CREATE_PIE+. = ${SHLIB_RODATA_ADDR};}}
EOF
fi
}

emit_rodata()
{
cat <<EOF
  ${WRITABLE_RODATA-${RODATA}}
  .${RODATA_NAME}1      ${RELOCATING-0} : { *(.${RODATA_NAME}1) }
  ${CREATE_SHLIB-${SDATA2}}
  ${CREATE_SHLIB-${SBSS2}}
  ${OTHER_READONLY_SECTIONS}
  .eh_frame_hdr ${RELOCATING-0} : { *(.eh_frame_hdr)${RELOCATING+ *(.eh_frame_entry .eh_frame_entry.*)} }
  .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame))${RELOCATING+ *(.eh_frame.*)} }
  .sframe       ${RELOCATING-0} : ONLY_IF_RO { *(.sframe)${RELOCATING+ *(.sframe.*)} }
  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table${RELOCATING+ .gcc_except_table.*}) }
  .gnu_extab ${RELOCATING-0} : ONLY_IF_RO { *(.gnu_extab*) }

  /* These sections are generated by the Sun/Oracle C++ compiler.  */
  .exception_ranges ${RELOCATING-0} : ONLY_IF_RO { *(.exception_ranges${RELOCATING+*}) }

  ${TEXT_PLT+${PLT_NEXT_DATA+${PLT} ${OTHER_PLT_SECTIONS}}}
EOF

test -n "${RELOCATING}" && cat <<EOF
  /* Various note sections.  Placed here so that they are always included
     in the read-only segment and not treated as orphan sections.  The
     current orphan handling algorithm does place note sections after R/O
     data, but this is not guaranteed to always be the case.  */
  .note.build-id :      { *(.note.build-id) } ${REGION}
  .note.GNU-stack :     { *(.note.GNU-stack) } ${REGION}
  .note.gnu.property :  { *(.note.gnu.property) } ${REGION}
  .note.ABI-tag :       { *(.note.ABI-tag) } ${REGION}
  .note.package :       { *(.note.package) } ${REGION}
  .note.dlopen :        { *(.note.dlopen) } ${REGION}
  .note.netbsd.ident :  { *(.note.netbsd.ident) } ${REGION}
  .note.openbsd.ident : { *(.note.openbsd.ident) } ${REGION}

  ${ETEXT_LAST_IN_RODATA_SEGMENT+PROVIDE (__${ETEXT_NAME} = .);}
  ${ETEXT_LAST_IN_RODATA_SEGMENT+PROVIDE (_${ETEXT_NAME} = .);}
  ${ETEXT_LAST_IN_RODATA_SEGMENT+PROVIDE (${ETEXT_NAME} = .);}
EOF
}

align_data()
{
cat <<EOF
  /* Start of the Read Write Data region.  */
  ${RELOCATING+/* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  */}
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
  ${CREATE_SHLIB+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}
  ${CREATE_PIE+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}
EOF
}

emit_init_fini_arrays()
{
cat <<EOF
.preinit_array    :
  {
    ${CREATE_SHLIB-PROVIDE_HIDDEN ($(def_symbol "__preinit_array_start"));}
    KEEP (*(.preinit_array))
    ${CREATE_SHLIB-PROVIDE_HIDDEN ($(def_symbol "__preinit_array_end"));}
  }

  .init_array    :
  {
    ${CREATE_SHLIB-PROVIDE_HIDDEN ($(def_symbol "__init_array_start"));}
    ${SORT_INIT_ARRAY}
    KEEP (*(.init_array ${CTORS_IN_INIT_ARRAY}))
    ${CREATE_SHLIB-PROVIDE_HIDDEN ($(def_symbol "__init_array_end"));}
  }

  .fini_array    :
  {
    ${CREATE_SHLIB-PROVIDE_HIDDEN ($(def_symbol "__fini_array_start"));}
    ${SORT_FINI_ARRAY}
    KEEP (*(.fini_array ${DTORS_IN_FINI_ARRAY}))
    ${CREATE_SHLIB-PROVIDE_HIDDEN ($(def_symbol "__fini_array_end"));}
  }
EOF
}

emit_data()
{
cat <<EOF
  /* Exception handling.  */
  .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame))${RELOCATING+ *(.eh_frame.*)} }
  .sframe       ${RELOCATING-0} : ONLY_IF_RW { *(.sframe)${RELOCATING+ *(.sframe.*)} }
  .gnu_extab    ${RELOCATING-0} : ONLY_IF_RW { *(.gnu_extab) }
  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table${RELOCATING+ .gcc_except_table.*}) }
  .exception_ranges ${RELOCATING-0} : ONLY_IF_RW { *(.exception_ranges${RELOCATING+*}) }

  /* Thread Local Storage sections.  */
  .tdata	${RELOCATING-0} :
   {
     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN ($(def_symbol "__tdata_start"));}}
     *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*})
   }
  .tbss		${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }

  ${RELOCATING+$(emit_init_fini_arrays)}

  ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
  ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}

  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }

  ${RELOCATING+${DATARELRO}}
  ${OTHER_RELRO_SECTIONS}
  ${TEXT_DYNAMIC-${DYNAMIC}}
  ${OTHER_RELRO_SECTIONS_2}
  ${DATA_GOT+${RELRO_NOW+${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}}}
  ${DATA_GOT+${RELRO_NOW+${GOT}}}
  ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
  ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
  ${INITIAL_READWRITE_SECTIONS}
  ${DATA_SDATA+${SDATA}}
  ${DATA_SDATA+${OTHER_SDATA_SECTIONS}}
  ${DATA_SDATA+${SBSS}}
  ${DATA_GOT+${RELRO_NOW-${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}}}
  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
  ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}

  ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}

  .data         ${RELOCATING-0}${RELOCATING+${DATA_SECTION_ALIGNMENT}} :
  {
    ${RELOCATING+${DATA_START_SYMBOLS}}
    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
  }

  .data1        ${RELOCATING-0} : { *(.data1) }

  ${WRITABLE_RODATA+${RODATA}}
  ${OTHER_READWRITE_SECTIONS}

  ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
  ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
  ${SDATA_GOT+${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}}
  
  ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS+. = .; ${OTHER_GOT_SYMBOLS}}}}

  ${SDATA_GOT+${GOT}}
  ${SDATA_GOT+${OTHER_GOT_SECTIONS}}

  ${DATA_SDATA-${SDATA}}
  ${DATA_SDATA-${OTHER_SDATA_SECTIONS}}

  ${RELOCATING+${SYMBOL_ABI_ALIGNMENT+. = ALIGN(${SYMBOL_ABI_ALIGNMENT});}}
  ${RELOCATING+${DATA_END_SYMBOLS-${CREATE_SHLIB+PROVIDE (}$(def_symbol "_edata")${CREATE_SHLIB+)};
  PROVIDE ($(def_symbol "edata"));}}

  $(emit_persistent)

  ${RELOCATING+. = ALIGN(ALIGNOF(NEXT_SECTION));}
  ${RELOCATING+${CREATE_SHLIB+PROVIDE (}$(def_symbol "__bss_start")${CREATE_SHLIB+)};}
  ${RELOCATING+${OTHER_BSS_SYMBOLS}}

  ${DATA_SDATA-${SBSS}}
  ${BSS_PLT+${PLT}}
  .${BSS_NAME}          ${RELOCATING-0} :
  {
    ${RELOCATING+*(.dynbss)}
    *(.${BSS_NAME}${RELOCATING+ .${BSS_NAME}.* .gnu.linkonce.b.*})
    ${RELOCATING+*(COMMON)}
    /* Align here to ensure that in the common case of there only being one
       type of .bss section, the section occupies space up to _end.
       Align after .bss to ensure correct alignment even if the
       .bss section disappears because there are no input sections.
       FIXME: Why do we need it? When there is no .bss section, we do not
       pad the .data section.  */
    $(align_to_default_section_alignment)
  }

  ${OTHER_BSS_SECTIONS}

  $(emit_large_bss 0)

  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}

  $(emit_noinit)

  $(align_to_default_symbol_alignment)
EOF
}

align_large_data()
{
  LARGE_DATA_ADDR=". = SEGMENT_START(\"ldata-segment\", ${LARGE_DATA_ADDR-.});"
  SHLIB_LARGE_DATA_ADDR=". = SEGMENT_START(\"ldata-segment\", ${SHLIB_LARGE_DATA_ADDR-.});"

cat <<EOF
  /* Start of the Large Data region.  */
  ${RELOCATING+${CREATE_SHLIB-${CREATE_PIE-${LARGE_DATA_ADDR}}}}
  ${CREATE_SHLIB+${SHLIB_LARGE_DATA_ADDR}}
  ${CREATE_PIE+${SHLIB_LARGE_DATA_ADDR}}
EOF
}

emit_large_bss()
{
  if test "${LARGE_SECTIONS}" != "yes"; then
    return
  fi

  if test "$1" = "0"; then
    if test -n "${LARGE_BSS_AFTER_BSS}"; then
      return
    fi
  else
    if test -z "${LARGE_BSS_AFTER_BSS}"; then
      return
    fi
  fi  

cat <<EOF
  .lbss ${RELOCATING-0} :
    {
      ${RELOCATING+*(.dynlbss)}
      *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
      ${RELOCATING+*(LARGE_COMMON)}
    }
EOF
}

emit_large_data()
{
  if test "${LARGE_SECTIONS}" != "yes"; then
    return
  fi
    
cat <<EOF
  .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
  {
    *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
  }

  .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
  {
    *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
    $(align_to_default_section_alignment)
  }

  $(emit_large_bss 1)
EOF
}

emit_end_symbols()
{
cat <<EOF
  ${RELOCATING+${OTHER_END_SYMBOLS}}

  ${RELOCATING+${END_SYMBOLS-${CREATE_SHLIB+PROVIDE (}$(def_symbol "_end")${CREATE_SHLIB+)};
  PROVIDE ($(def_symbol "end"));}}

  ${RELOCATING+${DATA_SEGMENT_END}}
EOF
}

emit_tiny_data()
{
cat <<EOF
  /* Start of the Tiny Data region.  */
  ${TINY_DATA_SECTION}
  ${TINY_BSS_SECTION}
EOF
}

emit_stack()
{
  if test -z "${STACK_ADDR}"; then
    return
  fi

cat <<EOF
  /* Stack.  */
  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
  {
    ${RELOCATING+$(def_symbol "_stack");}
    *(.stack)
    ${RELOCATING+${STACK_SENTINEL}}
  }
EOF
}

emit_misc()
{
  source_sh $srcdir/scripttempl/misc-sections.sc
  source_sh $srcdir/scripttempl/DWARF.sc

cat <<EOF
  ${ATTRS_SECTIONS}
  ${OTHER_SECTIONS}
  ${RELOCATING+${OTHER_SYMBOLS}}
  ${RELOCATING+${DISCARDED}}
EOF
}

# ===========================================================================
# The script:

emit_header

cat <<EOF
SECTIONS
{
EOF

  emit_executable_start

  #------Early Read Only Data -----------------------------------------------

  if test -z "${ALL_TEXT_BEFORE_RO}"; then
    # We are allowed to put R/O sections before code sections.
    # Doing so either puts read only data into the code segment, if the data
    # and code sections are contiguous, or creates a data segment followed by
    # a code segment, followed by another data segment (for read/write data).
    # Having three segments like this makes the binary bigger, which is a
    # problem for some scenarios, eg containers.  On the other hand, having
    # data in an executable code segment means that it might provide an
    # avenue of attack for bad actors, which is a security risk.

    test -n "${SEPARATE_CODE}" || emit_early_ro
    test -n "${NON_ALLOC_DYN}${SEPARATE_CODE}" || emit_dyn

    # We only need the alignment if we have emitted some sections.
    if test -z "${SEPARATE_CODE}"; then
      align_text
    elif test -z "${NON_ALLOC_DYN}${SEPARATE_CODE}"; then
      align_text
    fi
  fi
  
  #------Executable Code ----------------------------------------------------

  # We do not invoke "align_text" here as doing so will increase the file
  # size.  Normally having the text segment at the start of the file will
  # automatically mean that it is aligned and if we have emitted any R/O
  # sections due to the code above, then extra alignment will have already
  # been generated.

  emit_text
  emit_text_end_symbols

  # FIXME: We emit the text segment alignment operations again here.
  # (If they are defined).  It is not clear why we do this.

  align_text

  #------Read Only Data -----------------------------------------------------

  align_rodata

  # If we have not already emitted the early read only data sections then do
  # so now.  Also if the dynamic section has not already been emitted and we
  # can put it into the data segment, then do that here as well.

  if test -n "${ALL_TEXT_BEFORE_RO}"; then
    test -n "${SEPARATE_CODE}" || emit_early_ro
    test -n "${NON_ALLOC_DYN}${SEPARATE_CODE}" || emit_dyn
  fi
  test -z "${SEPARATE_CODE}" || emit_early_ro
  test -z "${SEPARATE_CODE}" || emit_dyn

  # Now emit the rest of the read only data.

  emit_rodata

  #------Read Write Data ----------------------------------------------------

  align_data
  emit_data
  
  align_large_data
  emit_large_data

  align_to_default_symbol_alignment
  emit_end_symbols

  # FIXME: Should the tiny data sections appear before the end symbols ?

  emit_tiny_data

  #------Miscellaneous ------------------------------------------------------

  emit_stack

  test -z "${NON_ALLOC_DYN}" || emit_dyn

  emit_misc

cat <<EOF
}
EOF