# Copyright (C) 1996-2021 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# This file was written by Daniel Jacobowitz <drow@mvista.com>
# (parts based on pthreads.exp by Fred Fish (fnf@cygnus.com).
#
# This test covers the various forms of "set scheduler-locking".

# This test requires sending ^C to interrupt the running target.

if [target_info exists gdb,nointerrupts] {
    verbose "Skipping schedlock.exp because of nointerrupts."
    return
}

standard_testfile

# The number of threads, including the main thread.
set NUM 2

if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable debug] != "" } {
    return -1
}

# Now we can proceed with the real testing.

# Get the current contents of the `args` array in the test program.
# Description is appended to the test message.

proc get_args { description } {
    global gdb_prompt
    global NUM

    set pattern "(\[0-9\]+)"
    for {set i 1} {[expr $i < $NUM]} {incr i} {
	append pattern ", (\[0-9\]+)"
    }

    set test "listed args ($description)"
    gdb_test_multiple "print args" $test {
	-re "\\\$\[0-9\]+ = {$pattern}.*$gdb_prompt $" {
	    pass $test

	    set result ""
	    for {set i 1} {[expr $i <= $NUM]} {incr i} {
		lappend result $expect_out($i,string)
	    }
	    return $result
	}
    }
}

proc stop_process { description } {
  global gdb_prompt

  # For this to work we must be sure to consume the "Continuing."
  # message first, or GDB's signal handler may not be in place.
  after 1000 {send_gdb "\003"}
  gdb_expect {
    -re "Thread .* received signal SIGINT.*$gdb_prompt $"
      {
	pass $description
      }
    timeout
      {
	fail "$description (timeout)"
      }
  }
}

proc get_current_thread { description } {
    global gdb_prompt

    set test "find current thread ($description)"

    gdb_test_multiple "bt" $test {
	-re "thread_function \\(arg=0x(\[0-9\])\\).*$gdb_prompt $" {
	    pass $test
	    return $expect_out(1,string)
	}
    }
    return ""
}

# Make sure we're stopped in the loop, in one of the non-main threads.

proc goto_loop { msg } {
    gdb_breakpoint [concat [gdb_get_line_number "schedlock.exp: main loop"] " if arg != 0"]

    set test "return to loop"
    if {$msg != ""} {
	set test "$test ($msg)"
    }
    gdb_continue_to_breakpoint $test
    delete_breakpoints
}

proc my_continue { msg } {
    set test "continue ($msg)"
    gdb_test_multiple "continue" $test {
	-re "Continuing" {
	    pass $test
	}
    }

    stop_process "stop all threads ($msg)"

    goto_loop $msg
}

# Use CMD to step the loop 10 times.  CMD may be "step" or "next".

proc step_ten_loops { cmd } {
    global gdb_prompt

    for {set i 0} {[expr $i < 10]} {set i [expr $i + 1]} {
	set other_step 0
	set test "$cmd to increment ($i)"
	gdb_test_multiple $cmd $test {
	    -re ".*myp\\) \\+\\+;\[\r\n\]+$gdb_prompt $" {
		pass $test
	    }
	    -re "$gdb_prompt $" {
		if {$other_step == 0} {
		    set other_step 1
		    send_gdb "$cmd\n"
		    exp_continue
		} else {
		    fail $test
		    # FIXME cascade?
		}
	    }
	}
    }
}

# Start with a fresh gdb.

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir

# We'll need this when we send_gdb a ^C to GDB.  Need to do it before we
# run the program and gdb starts saving and restoring tty states.
gdb_test "shell stty intr '^C'" ".*"

gdb_load ${binfile}

gdb_test_no_output "set print sevenbit-strings"
gdb_test_no_output "set width 0"

runto_main

# See if scheduler locking is available on this target.
global gdb_prompt
gdb_test_multiple "set scheduler-locking off" "scheduler locking set to none" {
    -re "Target .* cannot support this command" {
	unsupported "target does not support scheduler locking"
	return
    }
    -re "$gdb_prompt $" {
	pass "scheduler locking set to none"
    }
    timeout {
	unsupported "target does not support scheduler locking (timeout)"
	return
    }
}

gdb_breakpoint [gdb_get_line_number "schedlock.exp: last thread start"]
gdb_continue_to_breakpoint "all threads started"

set start_args [get_args "before initial"]

# First make sure that all threads are alive.
my_continue "initial"

set cont_args [get_args "after initial"]

set bad 0
for {set i 0} {[expr $i < $NUM]} {set i [expr $i + 1]} {
  if {[lindex $start_args $i] == [lindex $cont_args $i]} {
    incr bad
  }
}
if { $bad == 0 } {
  pass "all threads alive"
} else {
  fail "all threads alive ($bad/$NUM did not run)"
}

# Compare the previous thread and args with the current thread and
# args.  Check that we didn't switch threads, and that the threads
# incremented their args counter the amounts expected.  CMD is the
# command being tested.  BEFORE_THREAD is the thread that was selected
# before the command was run.  BEFORE_ARGS is the value of the
# thread's args before the command was run.  LOCKED indicates whether
# we expect threads other than the selected thread remained locked.

proc check_result { cmd before_thread before_args locked } {
    global NUM

    # Make sure we're still in the same thread.
    set newthread [get_current_thread "after"]

    set test "$cmd does not change thread"
    if {$before_thread == $newthread} {
	pass "$test"
    } else {
	fail "$test (switched to thread $newthread)"
    }

    set after_args [get_args "after"]

    set test "current thread advanced"
    if { $locked } {
	set test "$test - locked"
    } else {
	set test "$test - unlocked"
    }

    set num_other_threads 0
    for {set i 0} {$i < $NUM} {incr i} {
	if {[lindex $before_args $i] == [lindex $after_args $i]} {
	    if {$i == $before_thread} {
		fail "$test (didn't run)"
	    }
	} else {
	    if {$i == $before_thread} {
		if {$cmd == "continue"
		    || [lindex $before_args $i] == [expr [lindex $after_args $i] - 10]} {
		    pass "$test"
		} else {
		    fail "$test (wrong amount)"
		}
	    } else {
		incr num_other_threads
	    }
	}
    }

    if { $locked } {
	gdb_assert {$num_other_threads == 0} "other threads didn't run - locked"
    } else {
	gdb_assert {$num_other_threads > 0} "other threads ran - unlocked"
    }
}

with_test_prefix "schedlock=on: cmd=continue" {
    # Use whichever we stopped in.
    set curthread [get_current_thread "before"]

    # Test continue with scheduler locking.
    gdb_test "set scheduler-locking on" ""

    my_continue "with lock"

    check_result "continue" $curthread $cont_args 1
}

# Test stepping/nexting with different modes of scheduler locking.
proc test_step { schedlock cmd call_function } {
    global NUM

    gdb_test_no_output "set scheduler-locking off"
    goto_loop ""

    set curthread [get_current_thread "before"]

    # No need to set to off again.  This avoids a duplicate message.
    if {$schedlock != "off"} {
	gdb_test_no_output "set scheduler-locking $schedlock"
    }

    gdb_test "print call_function = $call_function" \
	" = $call_function"

    set before_args [get_args "before"]

    step_ten_loops $cmd

    if { $schedlock == "on" || $schedlock == "step" } {
	set locked 1
    } else {
	set locked 0
    }

    check_result $cmd $curthread $before_args $locked
}

# Test stepping/nexting with different modes of scheduler locking.
foreach schedlock {"off" "step" "on"} {
    with_test_prefix "schedlock=$schedlock" {
	with_test_prefix "cmd=step" {
	    test_step $schedlock "step" 0
	}
	with_test_prefix "cmd=next" {
	    # In GDB <= 7.9, with schedlock "step", "next" would
	    # unlock threads when stepping over a function call.  This
	    # exercises "next" with and without a function call.  WRT
	    # "schedlock step", "next" should behave just like "step".
	    foreach call_function {0 1} {
		with_test_prefix "call_function=$call_function" {
		    test_step $schedlock "next" $call_function
		}
	    }
	}
    }
}