| 2001-12-31 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-ia64.c (errata_nop_necessary_p): Prototype. |
| (make_unw_section_name): Constify local variables. |
| |
| * config/tc-ia64.c (has_suffix_p): New. |
| (note_register_values): Use it instead of strstr. |
| |
| 2001-12-31 Jeffrey A Law (law@redhat.com) |
| |
| * config/tc-hppa.c (pa_ip): Handle new 'c' mode completers, |
| 'X', 'M', and 'A'. |
| |
| 2001-12-21 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/tc-sparc.h (TC_PARSE_CONS_EXPRESSION): Define. |
| (sparc_cons): Provide prototype. |
| * config/tc-sparc.c (tc_gen_reloc): Handle BFD_RELOC_*_PCREL and |
| BFD_RELOC_SPARC_PLT{32,64}. Enumerate for which relocs |
| reloc->addend = fixp->fx_addnumber shouldn't be done instead of |
| enumarating for which pc relative ones it should be done. |
| (sparc_cons_special_reloc): New variable. |
| (sparc_cons): New function. |
| (cons_fix_new_sparc): Use sparc_cons_special_reloc. |
| |
| 2001-12-20 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| Daniel Jacobowitz <drow@mvista.com> |
| |
| * config/tc-mips.c (file_mips_gp32): Initialize to invalid value. |
| (file_mips_fp32): Likewise. |
| (md_begin): Compatibility handling for -mipsN option. |
| |
| 2001-12-20 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-sh.c (parse_at): Reject @(r0) and @(r0,). |
| |
| 2001-12-20 matthew green <mrg@redhat.com> |
| |
| * config/tc-ppc.c (md_parse_option): Make -maltivec default |
| to generating PowerPC instructions. |
| |
| 2001-12-20 Jason Thorpe <thorpej@wasabisystems.com> |
| |
| * configure.in (mips-dec-netbsd*): Delete. |
| * configure: Regenerate. |
| |
| * configure.in (arm-*-netbsdelf*): Add target. |
| * configure: Regenerate. |
| |
| 2001-12-18 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-mips.h (TC_HANDLE_FX_DONE): Remove redundant |
| definition. |
| |
| 2001-12-18 Niibe Yutaka <gniibe@m17n.org> |
| |
| * configure.in (assign object format): Bug fix for setting |
| endian. |
| * configure: Regenerate. |
| |
| 2001-12-18 matthew green <mrg@eterna.com.au> |
| |
| * configure.in (m68k-*-netbsdelf*): New target. |
| (m68k-*-netbsd*): Also include ELF support. |
| (m68k-*-netbsdaout*): New alias for m68*-*-netbsd*. |
| * configure: Regenerate. |
| |
| 2001-12-18 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * gasp.c (main): Protoype. |
| |
| 2001-12-17 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-alpha.c (alpha_handle_align): Encode unop with RB as $sp. |
| |
| 2001-12-17 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * cgen.c: Add prototype for queue_fixup. |
| (gas_cgen_parse_operand): Move initilisastion of errmsg to avoid |
| possible longjmp corruption. |
| * cgen.h: Add prototype for gas_cgen_md_operand. |
| |
| 2001-12-15 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/obj-elf.c (obj_elf_init_stab_section): References are |
| kept to section name strings. Don't alloca them! |
| |
| 2001-12-12 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-d10v.c (get_operands): Mark OPERAND_PLUS after |
| OPERAND_ATSIGN as O_absent. |
| |
| 2001-12-07 Geoffrey Keating <geoffk@redhat.com> |
| Richard Henderson <rth@redhat.com> |
| |
| * configure.in: Add support for xstormy16. |
| * configure: Regenerated. |
| * Makefile.am: Add support for xstormy16. |
| * Makefile.in: Regenerated. |
| * config/tc-xstormy16.c: New file. |
| * config/tc-xstormy16.h: New file. |
| |
| 2001-12-06 Richard Earnshaw (rearnsha@arm.com) |
| |
| * tc-arm.c (do_arit, do_cmp, do_mov, do_ldst, do_ldstt, do_ldmstm) |
| (do_branch, do_swi, do_adr, do_adrl, do_empty, do_mul, do_mla) |
| (do_swap, do_msr, do_mrs, do_mull, do_ldstv4, do_bx, do_blx) |
| (do_bkpt, do_clz, do_lstc2, do_cdp2, do_co_reg2, do_smla, do_smlal) |
| (do_smul, do_qadd, do_pld, do_ldrd, do_co_reg2c, do_cdp, do_lstc) |
| (do_co_reg, do_fpa_ctrl, do_fpa_ldst, do_fpa_ldmstm, do_fpa_monadic) |
| (do_fpa_dyadic, do_fpa_cmp, do_fpa_from_reg, do_fpa_to_reg, do_mia) |
| (do_mar, do_mra, do_c_binops, do_c_binops_1, do_c_binops_2) |
| (do_c_binops_3, do_c_triple, do_c_triple_4, do_c_triple_5, do_c_quad) |
| (do_c_quad_6, do_c_dspsc, do_c_dspsc_1, do_c_dspsc_2, do_c_shift) |
| (do_c_shift_1, do_c_shift_2, do_c_ldst, do_c_ldst_1, do_c_ldst_2) |
| (do_c_ldst_3, do_c_ldst_4, do_branch25): Delete redundant argument, |
| FLAGS. |
| (struct asm_opcode): Adjust parms field accordingly. |
| (md_assemble): Don't pass dummy second argument when calling worker |
| functions. |
| (build_arm_ops_hsh): Add prototype |
| (BAD_FLAGS): Delete. |
| |
| 2001-12-05 Richard Earnshaw <rearnsha@arm.com> |
| |
| * tc-arm.c (struct asm_opcode): Delete comp_suffix and flags. Add |
| cond_offset. Rename variants->variant. |
| (insns): Adjust for new format. Explicitly code each variant that |
| takes flags. Remove temporary instructions. |
| (struct arm_it): Remove redundant field suffix. |
| (s_flag, ldr_flags, str_flags, byte_flag, cmp_flags, ldm_flags) |
| (stm_flags, lfm_flags, sfm_flags, round_flags, fix_flags, except_flag) |
| (long_flag): Delete. |
| (struct asm_flg): Delete. |
| (LONGEST_INST): Delete. |
| (V4_STR_BIT): Define. |
| (struct thumb_opcode): Rename variants->variant. |
| (do_empty): Renamed from do_nop. |
| (ldst_extend): Delete argument hwse. Split code for half-word and |
| signed byte instructions to ... |
| (ldst_extend_v4): ... here. |
| (ld_mode_required_here): Use ldst_extend_v4. |
| (do_ldrd): Simplify now that this is only called for ldrd. No |
| need to test for XScale, which was wrong anyway. Don't reject r12 |
| as a target register. Add test that ldrd doesn't update an index |
| register. |
| (do_pld): Don't allow post-indexed or write-back addressing modes. |
| Adjust call to ldst_extend. |
| (do_adr): Split code for adrl to ... |
| (do_adrl): ... here. |
| (do_cmp): No need to fold in COND_BIT. |
| (do_ldst): Simplify. Split code for ldrt/strt into do_ldstt. Split |
| code to handle half-word and signed byte instructions to ... |
| (do_ldstv4): ... here. |
| (do_ldstt): New function. Handle load/store with translate. |
| (do_ldmstm): Write feature modification bits directly into |
| inst.instruction. |
| (do_fpa_ldst): Remove suffix handling code. |
| (do_fpa_dyadic, do_fpa_monadic, do_fpa_from_reg): Likewise. |
| (do_fpa_ldmstm): Type of access is now held in inst.instruction. |
| (build_arm_ops_hsh): New function. |
| (md_begin): Call it. Don't build the ARM opcode directly. |
| (md_assemble): Simplify ARM instruction handling. |
| |
| 2001-12-05 Arati Dikey <aratid@kpit.com> |
| |
| * tc-sh.c (parse_at): Corrected incorrect op->type selection due |
| to missing 'else'. |
| |
| 2001-12-04 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-d10v.c (write_2_short): Don't skip dummy fixups, so |
| that we can tell which operand refers to the insn put in the L |
| container and mark it as such, so that the relocation type can be |
| adjusted. |
| |
| 2001-12-04 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (mips_cpreturn_offset): Better comment. |
| (load_register): Better error message. Cast away signedness |
| mismatches. Add casts needed for varargs. |
| (load_address): Replace checks of HAVE_64BIT_ADDRESS with dbl. |
| Remove superfluous casts. |
| (macro): Cast away signedness mismatches. Remove superfluous casts. |
| (s_cpload): Fix wrong comment. |
| (s_mips_weakext): Standardize output message. |
| (get_number): Likewise. |
| |
| 2001-12-04 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (append_insn): Add jump address range overflow |
| check. |
| |
| 2001-12-04 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (md_parse_option): Fix comment. Allow -mabi option |
| for ELF only. |
| (show): Document -mabi option. |
| |
| 2001-12-03 Jeroen Dobbelaere <jeroen.dobbelaere@acunia.com> |
| |
| * config/tc-arm.c (md_parse_option): Only clear cpu part when |
| specifying 'xscale' cpu (don't change the fpu part). |
| |
| 2001-12-04 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-d10v.c (find_opcode): Reject SP operand if |
| OPERAND_NOSP flag is present. |
| |
| 2001-12-03 Eric Christopher <echristo@redhat.com> |
| |
| * config/tc-mips.c (tc_gen_reloc): One missed BFD_RELOC_MIPS_GPREL. |
| |
| 2001-12-02 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (macro_build): Replace BFD_RELOC_MIPS_GPREL |
| by BFD_RELOC_GPREL16. |
| (load_address): Likewise. |
| (macro): Likewise. |
| (md_apply_fix): Likewise. Replace BFD_RELOC_MIPS_GPREL32 by |
| BFD_RELOC_GPREL32. |
| (s_gpword): Replace BFD_RELOC_MIPS_GPREL32 by BFD_RELOC_GPREL32. |
| (tc_gen_reloc): Replace BFD_RELOC_MIPS_GPREL by BFD_RELOC_GPREL16. |
| *config/tc-mips.h: Replace BFD_RELOC_MIPS_GPREL by BFD_RELOC_GPREL16. |
| |
| 2001-11-29 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-d10v.c (get_operands): Emit OPERAND_PLUS for |
| prefix `+'. |
| |
| * config/tc-d10v.c (find_opcode): Reject non-SP operand if |
| flags requires SP. |
| |
| 2001-11-29 Arati Dikey <aratid@kpit.com> |
| |
| * tc-sh.c (parse_at): Removed case-sensitivity of index register |
| R8, R9. |
| |
| 2001-11-28 Jakub Jelinek <jakub@redhat.com> |
| |
| * write.c (adjust_reloc_syms): Mark SEC_MERGE symbols as used |
| in reloc if it has non-zero addend. |
| * config/tc-alpha.c (tc_gen_reloc): Reinstall SEC_MERGE check. |
| * config/tc-sparc.c (md_apply_fix3): Likewise. |
| |
| 2001-11-28 Andreas Schwab <schwab@suse.de> |
| |
| * as.c (parse_args): Call md_after_parse_args if defined. |
| * config/tc-ia64.h (md_after_parse_args): Define. |
| * config/tc-ia64.c (ia64_after_parse_args): Reject --gstabs. |
| * doc/internals.texi (CPU backend): Document md_after_parse_args. |
| |
| 2001-11-23 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/tc-alpha.c (tc_gen_reloc): Remove SEC_MERGE test. |
| * write.c (adjust_reloc_syms): Don't handle relocs against |
| SEC_MERGE section symbols specially. |
| (fixup_segment): Likewise. |
| |
| 2001-11-21 Richard Sandiford <rsandifo@redhat.com> |
| |
| * config/tc-mips.c (mips_need_elf_addend_fixup): New, extracted from... |
| (md_apply_fix3): ...here. Don't prevent the symbol value being |
| subtracted twice from GPREL addends. |
| (tc_gen_reloc): Add the symbol value to a GPREL addend if it was |
| subtracted by the previous function. |
| |
| 2001-11-20 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-avr.c (md_apply_fix3): Fix typo introduced by |
| md_apply_fix3 change. |
| |
| 2001-11-20 Ben Elliston <bje@redhat.com> |
| |
| * config/tc-m88k.c (md_apply_fix3): Match local variable `val' to |
| usage after md_apply_fix3 cleanups. |
| |
| 2001-11-19 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * doc/c-mmix.texi: Use texinfo 4 features. |
| (MMIX-mmixal): Fix typo. |
| |
| 2001-11-17 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/tc-cris.c (md_apply_fix3): Cast value, not pointer, in |
| val assignment. |
| |
| 2001-11-16 Michael Snyder <msnyder@redhat.com> |
| |
| * stabs.c (stabs_generate_asm_lineno): Remember file and line number |
| from one call to the next, and eliminate consecutive duplicates |
| (thereby emitting only one line symbol per source line). |
| * dwarf2dbg.c (dwarf2_gen_line_info): Ditto. |
| |
| 2001-11-16 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-m68k.c (md_apply_fix3): Change val back to a signed type. |
| |
| 2001-11-15 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-hppa.c (md_apply_fix3): Fix a typo. |
| |
| 2001-11-15 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-alpha.c (md_apply_fix3): Fix a typo. |
| |
| 2001-11-15 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * write.c (fixup_segment): Remove references to md_apply_fix and |
| TC_HANDLE_FX_DONE. |
| * cgen.c, config/obj-coff.c, config/tc-*.c: Update all occurances |
| of md_apply_fix to md_apply_fix3. |
| Make all md_apply_fix3 functions void. |
| * cgen.h, config/obj-coff.h, tc-*.h: Remove all definitions of |
| MD_APPLY_FIX3 and TC_HANDLE_FX_DONE. |
| * doc/internals.texi: Update references to md_apply_fix3. |
| * tc.h: Update prototype for md_apply_fix3. |
| |
| 2001-11-15 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-i386.h (md_end): Define. |
| (i386_elf_emit_arch_note): Declare. |
| (CpuUnknown): Delete. |
| * config/tc-i386.c (default_arch): Constify. |
| (smallest_imm_type): Remove CpuUnknown test. |
| (md_assemble): Don't bother checking cpu_arch_flags non-zero. |
| (i386_elf_emit_arch_note): New function. |
| |
| * po/POTFILES.in: Regenerate. |
| |
| 2001-11-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (mips_ip): Re-allow %hi() op for non-ELF assembler. |
| |
| 2001-11-15 Alan Modra <amodra@bigpond.net.au> |
| |
| * frags.c (frag_grow): Revert last change. |
| |
| * dwarf2dbg.c (get_frag_fix): Align last frag size. |
| |
| * config/tc-ppc.c (ppc_insert_operand): Pass (ppc_cpu | ppc_size) |
| to operand->insert. |
| (md_assemble): Likewise. |
| |
| 2001-11-12 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * frags.c (frag_grow): Use frag_make_room() to grow the |
| obstack. |
| |
| 2001-11-14 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-sparc.c (md_apply_fix3): Do not remove the symbol's |
| value from the addend for fixups against local symbols in |
| SEC_MERGE sections - it was not added in, in the first place. |
| |
| 2001-11-11 Timothy Wall <twall@alum.mit.edu> |
| |
| * write.c (relax_segment): Convert symbol address into an octet |
| offset prior to adding to the frag address, which is an octet |
| offset. Add comments to that effect. |
| * config/tc-tic54x.c: Fix bugs causing tests to fail. |
| * config/tc-tic54x.h: Ditch PARAMS macro. |
| |
| 2001-11-13 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/obj-elf.c (obj_elf_version): Ensure terminating NUL is |
| put in note section. Use sizeof instead of hard-coded constants. |
| |
| 2001-11-12 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (support_64bit_objects): Define for OBJ_ELF only. |
| (md_longopts): Allow OPTION_MABI for ELF compilation only. RE-allow |
| OPTION_GP32, OPTION_GP64, OPTION_FP32 for non-ELF compilation. |
| Sort options a bit more logical. |
| (md_parse_option): Allow OPTION_32, OPTION_N32, OPTION_N64, |
| OPTION_MABI only for elf targets. |
| |
| 2001-11-12 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (set_at): Add cast needed for varargs. |
| (load_register): Likewise. |
| (macro): Likewise. Some code reformatting. |
| (macro2): Add cast needed for varargs. |
| (mips16_macro): Likewise. |
| |
| 2001-11-12 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (md_assemble): Remove superflous casts. |
| (append_insn): Likewise. |
| (mips16_macro_build): Likewise. |
| (macro): Likewise. |
| (mips16_ip): Likewise. |
| (s_cpload): Likewise. |
| (mips_relax_frag): Likewise. |
| |
| 2001-11-12 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (mips_abi_level): Move in front of |
| mips_set_options. |
| (mips_set_options): Add members gp32, fp32, abi. |
| (file_mips_gp32): New flag. |
| (file_mips_fp32): New flag. |
| (mips_opts): Initialize the new members. |
| (mips_gp32): Remove. |
| (mips_fp32): Remove. |
| (HAVE_32BIT_GPRS): Use the new values from mips_opts. |
| (HAVE_32BIT_FPRS): Likewise. |
| (HAVE_NEWABI): Likewise. |
| (HAVE_64BIT_OBJECTS): Likewise. |
| (md_begin): Likewise. Save default (file) values. |
| (md_parse_option): Use the new values from mips_opts. |
| (s_mipsset): Likewise. Fix logic to keep the ABI selection if |
| possible. Let .set mipsN work together with .set push/pop. |
| Enhance error messages. |
| (mips_elf_final_processing): Use file_mips_* for header processing. |
| |
| 2001-11-09 Marek Michalkiewicz <marekm@amelek.gda.pl> |
| |
| * config/tc-avr.c (mcu_types): Update for new devices. |
| |
| 2001-11-09 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * doc/Makefile.am (POD2MAN): Use 'GNU Development Tools' for |
| the page man title. |
| * doc/Makefile.in: Rebuild. |
| * doc/as.texinfo: Do not put man SEEALSO in document; |
| Use @command for commands, @option for options; Reorganize usage |
| to clearly identify target specific options. |
| |
| 2001-11-08 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (mips_force_relocation): Remove duplicate code. |
| |
| 2001-11-06 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (my_getSmallParser): Fix small parser bug. |
| |
| 2001-11-05 Martin Schwidefsky <schwidefsky@de.ibm.com> |
| |
| * config/tc-s390.c (tc_s390_force_relocation): Force all relocations |
| that need the global offset table. |
| (md_apply_fix3): Add code to undo opertions done in fixup_segment |
| triggered by TC_FORCE_RELOCATION. |
| * config/tc-s390.h (TC_FORCE_RELOCATION): Replace macro code with |
| a call to function tc_s390_force_relocation. |
| (TC_FIX_ADJUSTABLE): Define. |
| |
| 2001-11-04 Chris Demetriou <cgd@broadcom.com> |
| |
| * configure.in (mips-*-netbsd*): Add support for target. |
| * configure: Regenerate. |
| |
| 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * configure.in (ALL_LINGUAS): Add 'fr'. |
| * configure: Regernate. |
| * po/fr.po: New file. Obtained from the translation project web |
| site. |
| |
| 2001-11-02 Richard Earnshaw <rearnsha@arm.com> |
| |
| * tc-arm.c: Re-arrange prototypes by architecture. |
| (insns): Re-arrange instructions by archtitecture. Pld instruction |
| is part of ARMv5E. |
| (tinsns): blx and bkpt are part of ARMv5T. |
| (do_fp_{ctrl,ldst,ldstm,dyadic,monadic,cmp,from_reg,to_reg}): Rename |
| to do_fpa_*. All callers changed. |
| |
| * tc-arm.c (insns): Add two temporary instructions to handle |
| ldrd/strd. |
| |
| 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * config/tc-m68hc11.c (build_jump_insn): Allocate worst case storage |
| for bra/bsr and use frag_variant(), this ensure that the possible |
| 16-bit BFD_RELOC_16 will be in the same frag. |
| |
| 2001-10-31 Chris Demetriou <cgd@broadcom.com> |
| |
| * config/tc-mips.c (HAVE_32BIT_ADDRESSES): If compiling embedded |
| PIC code, assume pointers the same size as GPRs. |
| (macro): In M_LA_AB handling for embedded PIC code, support |
| "la $treg,foo-bar($breg)". In load/store handling |
| (label ld_st) support "<op> $treg,<sym>-<local_sym>($breg)" |
| which is used by the compiler for switch statements. |
| In load/store double multi-instruction macro handling |
| (label ldd_std) add a comment that no special handling |
| is currently done for embedded PIC. |
| (mips_ip): In 'o' (16-bit offset) case, only accept 16 |
| bit offsets. |
| |
| 2001-10-31 Richard Earnshaw <rearnsha@arm.com> |
| |
| General cleanup of feature definitions. |
| * tc-arm.c (ARM_EXT_LONGMUL, ARM_EXT_HALFWORD, ARM_EXT_THUMB): Delete. |
| (ARM_2UP, ARM_ALL, ARM_3UP, ARM_6UP): Delete. |
| (FPU_CORE, FPU_FPA10, FPA_FPA11, FPU_ALL, FPA_MEMMULTI): Delete. |
| (ARM_EXT_V{1,2,2S,3,3M,4,4T,5T,5ExP}): New defines. |
| (ARM_EXT_V{5,5E}): Synchronize with above. |
| (ARM_ARCH_V*): Define a complete set in terms of above features. |
| (ARM_{1,2,3,250,6,7,8,9,STRONG}): Define in terms of architecture. |
| (FPU_FPA_EXT_V[12]): Define. |
| (FPU_ARCH_FPE, FPU_ARCH_FPA): Define in terms of above. |
| (FPU_ANY): Define. |
| (FPU_DEFAULT): Default to FPA. |
| (CPU_DEFAULT): For XScale, this is now just ARM_ARCH_XSCALE; for |
| Thumb, this is now ARM_ARCH_V5T. |
| (insns): Rework for new feature defines. |
| (tinsns): Likewise. |
| (opcode_select, do_ldst, md_begin, md_parse_option): Likewise. |
| |
| 2001-10-31 NIIBE Yutaka <gniibe@m17n.org> |
| |
| * configure.in: Handle sh*eb-*-linux* and sh*-*-linux*. |
| * configure: Regenerate. |
| * Makefile.in: Regenerate. |
| * doc/c-sh.texi (SH Options): Added descriptions. |
| |
| 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * configure.in: Update for MMIX port. |
| * Makefile.am: Ditto. Regenerate dependencies. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| * config/tc-mmix.h, config/tc-mmix.c: New files. |
| * doc/Makefile.am (CPU_DOCS): Add c-mmix.texi |
| * doc/Makefile.in: Regenerate. |
| * doc/all.texi: @set MMIX. |
| * doc/as.texinfo: Ditto. Add MMIX gas manpage option overview. |
| Include c-mmix.texi. |
| * doc/c-mmix.texi: New file. |
| |
| 2001-10-24 Chris Demetriou <cgd@broadcom.com> |
| |
| * config/tc-mips.c (hilo_interlocks, cop_interlocks): Make |
| these evaluate to true if mips_arch indicates SB-1. |
| |
| 2001-10-23 Alan Modra <amodra@bigpond.net.au> |
| |
| * as.c (parse_args): Print the date as well for --version. |
| |
| 2001-10-20 Chris Demetriou <cgd@broadcom.com> |
| |
| * config/tc-mips.c (md_show_usage): Print "sb1" for Broadcom |
| SB-1 CPU for consistency. |
| (mips_cpu_info_table): Tweak comment about SB-1. |
| |
| 2001-10-20 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-arm.c (do_c_shift): Use ISDIGIT instead of isdigit. |
| (cirrus_parse_offset): Likewise. |
| |
| 2001-10-19 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-arm.c: Restore line_comment_chars. |
| |
| 2001-10-18 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-arm.c (comment_chars): Remove semi-colon accidentally |
| added to the list. |
| |
| 2001-10-18 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * write.c (fixup_segment): Handle fixups for SEC_MERGE sections as |
| for undefined symbols. |
| |
| 2001-10-17 Chris Demetriou <cgd@broadcom.com> |
| |
| * doc/as.texinfo (MIPS ISA options): Added accidentally |
| omitted "-mips64" option to list of options. |
| |
| 2001-10-17 matthew green <mrg@redhat.com> |
| |
| * config/tc-ppc.c (md_show_usage): Add missing -maltivec, -m7400, |
| -m7410, -m7450 and -m7455 options. |
| |
| 2001-10-17 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-ppc.c (PPC_HA, PPC_HIGHERA, PPC_HIGHESTA): Simplify. |
| (ppc_size): Select PPC_OPCODE_64 if 64 bit. |
| (md_begin): Don't set ppc_size here. |
| (ppc_target_format): Test ppc_size as well as BFD_DEFAULT_TARGET_SIZE. |
| (md_shortopts): Constify. |
| (md_longopts): Likewise. |
| (md_longopts_size): Likewise. |
| (ppc_elf_suffix): Only allow 64-bit relocs when ppc_size specifies |
| 64-bit opcodes. |
| (ppc_machine): Explain why this function is a nop. |
| |
| 2001-10-17 Alan Modra <amodra@bigpond.net.au> |
| |
| * bit_fix.h: Comment typo fix. |
| * config/tc-mips.c: Likewise. |
| * config/tc-sh.c: Likewise. |
| * config/tc-arc.c (arc_code_symbol): Remove unnecessary test. |
| |
| * configure.in (MIPS_STABS_ELF): AC_DEFINE in only one place so |
| that autoheader doesn't duplicate config.in entries. |
| (DEFAULT_ARCH): Ditto. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| |
| 2001-10-16 Alan Modra <amodra@bigpond.net.au> |
| |
| From Andrew Pines <apines@cosmodog.com> |
| * config/tc-m68k.c (m68k_ip): Correct absolute jmp opcodes. |
| |
| 2001-10-16 NIIBE Yutaka <gniibe@m17n.org>, |
| Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * config/tc-sh.c (shl): Remove. |
| (big): New function. |
| (little): Remove shl handling. Emit error for endian mismatch. |
| (md_show_usage): Add description of -big. |
| (md_parse_option): Handle OPTION_BIG. Remove shl handling. |
| (OPTION_BIG): Add. |
| (md_pseudo_table): Add .big. |
| (md_longopts): Add -big. |
| (md_begin): Don't set target_big_endian here. |
| * config/tc-sh.h (TARGET_BYTES_BIG_ENDIAN): Remove. |
| (LISTING_HEADER, COFF_MAGIC, TARGET_FORMAT): Use target_big_endian. |
| (shl): Remove. |
| * configure.in (endian): Default is big. |
| (sh-*-pe*): Little endian. |
| (cpu_type): Set sh for target sh*. |
| * configure: Regenerate. |
| |
| 2001-10-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (md_apply_fix): Preliminary handling of NewABI |
| relocations. |
| |
| 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-arm.c: Replace CONST with const. |
| |
| * cgen.c: Tidy up formatting. |
| |
| 2001-10-12 matthew green <mrg@redhat.com> |
| |
| * config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455 |
| flags, equivalent to -m7400. New -maltivec to enable AltiVec |
| instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable |
| 64-bit and 32-bit BookE support, respectively. Change -m403 and |
| -m405 to set PPC403 option. |
| (md_show_usage): Adjust for new options. |
| * doc/all.texi: Set PPC. |
| * doc/as.texinfo: Add PPC support and pull in c-ppc.texi. |
| * doc/c-ppc.texi: New file. |
| * doc/Makefile.am (CPU_DOCS): Add c-ppc.texi. |
| * doc/Makefile.in: Regenerate. |
| |
| 2001-10-12 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * read.c (s_bad_endr): New function. Issues a warning message |
| about a bad use of the .rept pseudo op. |
| (po_table[]): Add .endr. |
| * read.h: Prototype s_bad_endr. |
| |
| * CONTRIBUTORS: Update contact email address. |
| |
| 2001-10-11 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-alpha.c: Fix comment typos. |
| * config/tc-cris.c: Likewise. |
| * config/tc-hppa.c: Likewise. |
| * config/tc-i370.c: Likewise. |
| * config/tc-mips.c: Likewise. |
| * config/tc-mn10200.c: Likewise. |
| * config/tc-mn10300.c: Likewise. |
| * config/tc-sh.c: Likewise. |
| * config/tc-tahoe.c: Likewise. |
| * config/tc-v850.c: Likewise. |
| |
| 2001-10-11 Kazu Hirata <kazu@hxi.com> |
| |
| * app.c: Fix comment typos. |
| * bit_fix.h: Likewise. |
| * expr.c: Likewise. |
| * itbl-ops.c: Likewise. |
| |
| 2001-10-11 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * input-file.c: Include safe-ctype.h. |
| (input_file_open): Use ISSPACE instead of isspace. |
| |
| 2001-10-10 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (mips_cpreturn_offset): New variable. |
| (mips_cpreturn_register): Likewise. |
| (mips_gp_register): Likewise. |
| (s_cpsetup): New function prototype. |
| (s_cplocal): Likewise. |
| (s_cpreturn): Likewise. |
| (s_gpvalue): Likewise. |
| (mips_pseudo_table): Add .cpsetup, .cplocal, .cpreturn, .gpvalue |
| pseudo-ops. |
| (macro): Don't warn about .cprestore for NewABI. |
| (md_pcrel_from): Code cleanup. |
| (mips_force_relocation): Force output of some NewABI relocations even |
| without a defined symbol. |
| (s_cpload): Ignore .cpload for NewABI. |
| (s_cpsetup): Handle .cpsetup. |
| (s_cplocal): Handle .cplocal. |
| (s_cprestore): Ignore .cprestore for NewABI. |
| (s_cpreturn): Handle .cpreturn. |
| (s_gpvalue): Handle .gpvalue. |
| (s_cpadd): Ignore .cpadd for NewABI. |
| (nopic_need_relax): Take g_switch_value into account as gp |
| optimization. |
| (tc_gen_reloc): Don't handle BFD_RELOC_MIPS_{CALL,GOT}* for NewABI. |
| |
| 2001-10-10 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (my_getSmallParser): New function prototype. |
| (small_ex_type): Named this enum, more return values for |
| my_getSmallExpression. |
| (mips_ip): Allow SPC and HT between arguments. Handle some NewABI |
| triple relocations. Protect some parts with ifdef OBJ_ELF. |
| (percent_op_match): New struct, lookup table for %some_reloc(). |
| (my_getSmallParser): New function, parses nested percent_ops also. |
| (my_getSmallExpression): Rewite to support nested percent_ops. |
| |
| 2001-10-10 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c |
| (load_address): Support both 32- and 64-bit addresses. |
| (macro): Call load_register correctly. Expand 64-bit loads ans stores. |
| (macro2): Call load_address correctly. |
| |
| 2001-10-09 Christian Groessler <cpg@aladdin.de> |
| |
| * config/tc-z8k.c: Include opcodes/z8k-opc.h after bfd.h |
| since z8k-opc.h now uses the PARAMS macro. |
| |
| 2001-10-09 Aldy Hernandez <aldyh@redhat.com> |
| |
| * config/tc-arm.c: Change MAVERIK to MAVERICK. |
| |
| 2001-10-09 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/obj-elf.c: Make use of elf_group_name and elf_next_in_group |
| throughout file. |
| (obj_elf_change_section): Rename "group" to "group_name". |
| (obj_elf_section): Likewise. |
| (elf_frob_file): Don't use sec->lineno for SHT_GROUP section to store |
| first member section; Instead use elf_next_in_group. |
| |
| 2001-10-09 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/obj-elf.c: (obj_elf_change_section): Add "group" param. |
| Set elf_section_data group from it. Warn if group name changed. |
| (obj_elf_parse_section_letters): Parse 'G' too. |
| (obj_elf_section): Parse group name. |
| (struct group_list): New. |
| (build_group_lists): New function. |
| (elf_frob_file): Create SEC_GROUP section(s). |
| |
| * config/obj-elf.c: (elf_copy_symbol_attributes): Zap trailing |
| whitespace. |
| |
| 2001-10-08 Aldy Hernandez <aldyh@redhat.com> |
| |
| * doc/arm/c-arm.texi (ARM Options): Add arm9e documentation. |
| |
| * config/tc-arm.c (ARM_EXT_MAVERIK): New macro. |
| (cirrus_regtype): New enum. |
| (LONGEST_INST): Change to 10. |
| (CIRRUS_MODE1): New. |
| (CIRRUS_MODE2): New. |
| (CIRRUS_MODE3): New. |
| (CIRRUS_MODE4): New. |
| (CIRRUS_MODE5): New. |
| (CIRRUS_MODE6): New. |
| (insns): Add cirrus dsp instructions. |
| (ARM_EXT_MAVERIKSC_REG): New. |
| (cirrus_register): New. |
| (cirrus_mvf_register): New. |
| (cirrus_mvd_register): New. |
| (cirrus_mvfx_register): New. |
| (cirrus_mvdx_register): New. |
| (cirrus_mvax_register): New. |
| (ARM_EXT_MAVERIKsc_register): New. |
| (reg_table): Add cirrus registers. |
| (cirrus_valid_reg): New. |
| (cirrus_reg_required_here): New. |
| (do_c_binops_1): New. |
| (do_c_binops_2): New. |
| (do_c_binops_3): New. |
| (do_c_triple_4): New. |
| (do_c_triple_5): New. |
| (do_c_quad_6): New. |
| (do_c_dspsc_1): New. |
| (do_c_dspsc_2): New. |
| (do_c_shift_1): New. |
| (do_c_shift_2): New. |
| (do_c_ldst_1): New. |
| (do_c_ldst_2): New. |
| (do_c_ldst_3): New. |
| (do_c_ldst_4): New. |
| (do_c_binops): New. |
| (do_c_triple): New. |
| (do_c_quad): New. |
| (do_c_dspsc): New. |
| (do_c_shift): New. |
| (cirrus_parse_offset): New. |
| (do_c_ldst): New. |
| (md_parse_option): Add arm9e. |
| (md_show_usage): Same. |
| |
| 2001-10-08 Tom Rix <trix@redhat.com> |
| |
| * config/tc-ppc (ppc_bf, ppc_biei) : Set first .bi lineno value to |
| location of next .bf |
| * config/obj-coff.c (coff_frob_symbol) : XCOFF does not use endndx. |
| |
| 2001-10-07 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/obj-elf.c: Standardize error/warning messages - don't |
| capitalise, no final period or newline, don't say "ignoring" for |
| as_bad messages. In some cases, change the wording to that used |
| elsewhere for similar messages. |
| (obj_elf_section_name): New function, split out from .. |
| (obj_elf_section): .. here. Correctly mask off SHF_MERGE if |
| entsize not specified. |
| |
| 2001-10-05 Jakub Jelinek <jakub@redhat.com> |
| |
| * doc/as.texinfo: Document M and S ELF section flags. |
| |
| 2001-10-05 Alan Modra <amodra@bigpond.net.au> |
| |
| * subsegs.c (subseg_text_p): Return 0 for absolute section. |
| * read.c (do_align): If in absolute section, warn about and ignore |
| non-zero fill pattern. |
| |
| 2001-10-05 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-mn10300.c (tc_gen_reloc): Don't free |
| reloc->sym_ptr_ptr if it's not allocated. |
| |
| 2001-10-04 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (prev_insn_reloc_type): Make it an array to hold a |
| relocation triple. |
| (prev_insn_fixp): Likewise. |
| (append_insn): Changed prototype to accept a relocation pointer. |
| (imm_reloc): Make it an array. |
| (offset_reloc): Likewise. |
| (md_assemble): Handle triple relocations. |
| (append_insn): Likewise. Add handling for some NewABI relocations. |
| (mips_no_prev_insn): Handle triple relocations. |
| (macro_build): Likewise. Add handling for some NewABI relocations. |
| Move handling for the 'u' case to append_insn(). |
| (mips16_macro_build): Handle triple relocations. |
| (macro_build_lui): Likewise. Don't handle _gp_disp as special symbol |
| for NewABI. |
| (mips_ip): Handle triple relocations. |
| (mips16_ip): Likewise. |
| (mips_force_relocation): Force handling of triple relocations |
| without symbols for NewABI. |
| (md_apply_fix): Add handling for some NewABI relocations. |
| |
| 2001-10-05 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-i386.c (parse_register): If not producing code for |
| x86_64, reject x86_64 register name matches. |
| (md_assemble): Remove now redundant check for x86_64 regs. |
| |
| 2001-10-04 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-ppc.c (md_assemble <DS relocs>): Test ppc_size as well |
| as BFD_DEFAULT_TARGET_SIZE. |
| (ppc_tc): Likewise. |
| (ppc_is_toc_sym): Likewise. |
| (md_apply_fix3): Likewise. |
| |
| 2001-10-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (mips_64): Remove. |
| (mips_target_format): Move downwards in file, use HAVE_64BIT_OBJECTS |
| in it. |
| (mips_abi_level, mips_abi): New enum. |
| (mips_32bit_abi): Remove. |
| (HAVE*PRS): Use mips_abi instead of mips_32bit_abi. |
| (HAVE_NEWABI): New define. |
| (HAVE_64BIT_OBJECTS): New define. |
| (HAVE_32BIT_ADDRESSES): Don't return true for 64bit objects. |
| (HAVE_64BIT_ADDRESSES): New define, inverse of HAVE_32BIT_ADDRESSES. |
| (support_64bit_objects): New prototype. |
| (md_begin): Use mips_abi instead of mips_32bit_abi. Don't write |
| .reginfo section for n32, use .MIPS.options instead. |
| (support_64bit_objects): New function, code from md_parse_option. |
| (md_longopts): Add -n32 option. |
| (md_parse_option): Use mips_abi instead of mips_32bit_abi/mips64. |
| Add -n32 option. Protect with OBJ_ELF. |
| (s_mipsset): Use mips_abi instead of mips_32bit_abi. |
| (mips_elf_final_processing): Likewise. Don't write .reginfo section |
| for n32, use .MIPS.options instead. |
| |
| 2001-10-03 Alan Modra <amodra@bigpond.net.au> |
| |
| * po/POTFILES.in: Regenerate. |
| * configure: Regenerate. |
| |
| 2001-10-02 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-ppc.c (md_apply_fix3 <BFD_RELOC_CTOR>): Make it 64 |
| bits if target is 64 bit. |
| |
| * doc/as.texinfo (listing): Fix typo. |
| |
| * as.c (print_version_id): Use BFD_VERSION_STRING in place of |
| BFD_VERSION. |
| * Makefile.am (Makefile): Depend on bfd/configure.in. |
| Run "make dep-am". |
| * Makefile.in: Regenerate. |
| |
| 2001-09-30 H.J. Lu <hjl@gnu.org> |
| |
| * config/obj-elf.c (obj_elf_parse_section_letters): Accept "am" |
| and "ams" for compatibility. |
| |
| 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * config/tc-sh.c (md_pcrel_from_section): Transformed from |
| md_pcrel_from. Handle pc-relativeness against link-time |
| symbol. Handle relativeness to elsewhere than the fixup. |
| * config/tc-sh.h (MD_PCREL_FROM_SECTION): Define. |
| (md_pcrel_from_section): Prototype. |
| |
| * Makefile.am: Update dependencies with "make dep-am". |
| * Makefile.in: Regenerate. |
| |
| 2001-09-30 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * config/tc-m68hc11.c (cmp_opcode): Define prototype. |
| (print_opcode_format, skip_whites): Likewise. |
| (convert_branch, m68hc11_new_insn): Likewise. |
| (build_dbranch_insn, build_indexed_byte): Likewise. |
| (build_reg_mode, find, find_opcode): Likewise. |
| (print_insn_format): Fix call to print_opcode_format. |
| (md_assemble): Fix call to build_dbranch_insn. |
| |
| 2001-09-27 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-arm.c: Add missing prototypes. |
| |
| 2001-09-26 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * input-file.c (input_file_open): When reading the |
| first line looking for #NO_APP, prepare for the possibility |
| of finding #APP instead. Also fix algorithm to allow |
| white-space to follow either #NO_APP or #APP directives. |
| |
| 2001-09-25 Geoff Berry <geoff.berry@bops.com> |
| |
| * listing.c (buffer_line): Don't write past the end of `line' when |
| EOF is reached. |
| |
| 2001-09-25 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-mn10300.c (tc_gen_reloc): Don't emit an *ABS* |
| relocation for differences between symbols in a section other |
| than the one in which the difference is to be placed; apply |
| the relocation instead. |
| |
| 2001-09-24 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-arc.c: Add missing prototype. |
| (md_atof): Change type to int. Add missing prototype. |
| * config/tc-arc.h: Prototype exported functions. |
| |
| 2001-09-22 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * as.c: Add missing function prototype. |
| * config/obj-aout.c: Fix compile time warning. |
| |
| 2001-09-21 Bruno Haible <haible@clisp.cons.org> |
| |
| * config/tc-openrisc.c: Don't include <ctype.h>. |
| |
| 2001-09-19 Martin Schwidefsky <schwidefsky@de.ibm.com> |
| |
| * gas/config/tc-s390.c: Add option -mwarn-areg-zero. |
| |
| 2001-09-19 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-i370.c: Fix typo in last change. |
| |
| 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * doc/as.texinfo (Symbol Names): Improve documentation on local |
| labels and add documenation about dollar labels. |
| |
| 2001-09-18 Bruno Haible <haible@clisp.cons.org> |
| |
| * as.h: Don't include <ctype.h>. |
| * as.c (main): For gettext, also set the LC_CTYPE locate facet. |
| * atof-generic.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (atof_generic): Use ISDIGIT instead of isdigit. |
| * config/m68k-parse.y: Include "safe-ctype.h". |
| (yylex): Use ISDIGIT/ISALNUM instead of isdigit/isalnum. |
| * config/obj-elf.c: Include "safe-ctype.h". |
| (obj_elf_vtable_inherit): Use ISSPACE instead of isspace. |
| * config/obj-vms.c: Include "safe-ctype.h". |
| (Write_VMS_MHD_Records): Use TOUPPER instead of islower/toupper. |
| (VMS_Case_Hack_Symbol): Use ISUPPER/ISLOWER/TOUPPER/TOLOWER |
| instead of isupper/islower/toupper/tolower. |
| * config/tc-a29k.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (insert_sreg): Use TOUPPER instead of islower/toupper. |
| (machine_ip): Use ISALPHA/ISALNUM/ISUPPER/TOLOWER instead of |
| isalpha/isalnum/isupper/tolower. |
| (a29k_unrecognized_line, md_operand): Use ISDIGIT instead of |
| isdigit. |
| * config/tc-alpha.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (md_undefined_symbol, s_alpha_ent): Use ISDIGIT instead of isdigit. |
| * config/tc-arc.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (md_assemble): Use ISSPACE/ISALNUM instead of isspace/isalnum. |
| (arc_extoper): Use TOLOWER instead of isupper/tolower. |
| * config/tc-arm.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (arm_psr_parse): Use ISALPHA instead of isalpha. |
| (accum0_required_here): Use ISALNUM instead of isalnum. |
| (do_ldrd): Use ISSPACE instead of isspace. |
| (decode_shift): Use ISALPHA instead of isalpha. |
| (insert_reg): Use TOUPPER instead of islower/toupper. |
| (arm_reg_parse): Use ISALPHA instead of isalpha. |
| (arm_parse_reloc): Use ISALNUM/ISPUNCT/TOLOWER instead of |
| isalnum/ispunct/tolower. |
| * config/tc-avr.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (md_parse_option): Use TOLOWER instead of tolower. |
| (avr_operand): Use ISDIGIT/TOLOWER instead of isdigit/tolower. |
| * config/tc-cris.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (cris_process_instruction): Use ISLOWER instead of islower. |
| (get_gen_reg): Use ISALNUM/ISDIGIT instead of isalnum/isdigit. |
| (get_spec_reg): Use TOLOWER/ISALNUM instead of isupper/tolower/isalnum. |
| (get_flags): Use ISSPACE instead of isspace. |
| * config/tc-d10v.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (do_assemble): Use TOLOWER instead of tolower. |
| * config/tc-d30v.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (do_assemble): Use TOLOWER instead of tolower. |
| (d30v_start_line): Use ISSPACE instead of isspace. |
| * config/tc-fr30.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (fr30_is_colon_insn): Use TOLOWER instead of tolower. |
| * config/tc-h8300.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (skip_colonthing, get_operand): Use ISDIGIT instead of isdigit. |
| * config/tc-h8500.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (start_label): Use ISALPHA instead of isalpha. |
| * config/tc-hppa.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (pa_ip): Use ISUPPER/ISLOWER/TOLOWER instead of |
| isupper/islower/tolower. |
| (pa_parse_number): Use ISDIGIT instead of isdigit. |
| (pa_chk_field_selector): Use TOLOWER instead of tolower. |
| (pa_stringer): Use ISDIGIT instead of isdigit. |
| * config/tc-i370.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (register_name): Use ISALPHA instead of isalpha. |
| (i370_elf_suffix): Use ISALNUM/TOLOWER instead of |
| isalnum/islower/tolower. |
| (i370_addr_offset): Use ISDIGIT/ISALPHA instead of |
| isdigit/isalpha. |
| (i370_addr_cons): Use ISALPHA/ISXDIGIT instead of |
| isalpha/isxdigit. |
| (md_assemble): Use ISSPACE instead of isspace. |
| * config/tc-i386.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (md_begin): Use ISDIGIT/ISLOWER/ISUPPER/TOLOWER/ISALPHA |
| instead of isdigit/islower/isupper/tolower/isalpha. |
| (output_invalid): Use ISPRINT instead of isprint. |
| * config/tc-i860.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (i860_ip): Use ISLOWER/ISDIGIT instead of islower/isdigit. |
| * config/tc-i960.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (get_args): Use ISALNUM instead of isalnum. |
| * config/tc-ia64.c: Include "safe-ctype.h". |
| (dot_pred_rel): Use TOUPPER/ISDIGIT instead of toupper/isdigit. |
| (ia64_unrecognized_line): Use ISDIGIT instead of isdigit. |
| (ia64_parse_name): Likewise. |
| * config/tc-m32r.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (assemble_two_insns): Use ISSPACE/ISALNUM/ISUPPER/TOLOWER |
| instead of isspace/isalnum/isupper/tolower. |
| * config/tc-m68hc11.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (md_assemble): Use TOLOWER/ISALNUM instead of tolower/isalnum. |
| * config/tc-m68k.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (mklower_table): Remove variable. |
| (mklower): Remove macro. |
| (insert_reg): Use TOUPPER instead of islower/toupper. |
| (md_begin): Remove initialization of mklower_table. |
| (s_reg): Use ISALNUM instead of isalnum. |
| (mri_assemble): Use ISUPPER/TOLOWER instead of isupper/tolower. |
| (parse_mri_condition): Use TOLOWER instead of isupper/tolower. |
| (build_mri_control_operand): Use TOLOWER instead of tolower. |
| (s_mri_else, s_mri_break, s_mri_next, s_mri_for): Likewise. |
| * config/tc-m88k.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (md_assemble): Use ISSPACE instead of isspace. |
| (get_imm16): Use ISALNUM instead of isalnum. |
| (get_cnd): Use ISDIGIT/ISUPPER/TOLOWER instead of |
| isdigit/isupper/tolower. |
| (get_bf_offset_expression): Use ISALPHA/ISUPPER/TOLOWER |
| instead of isalpha/isupper/tolower. |
| (hexval): Use ISDIGIT/ISLOWER/ISUPPER instead of |
| isdigit/islower/isupper. |
| * config/tc-mcore.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (mcore_s_section): Use ISSPACE instead of isspace. |
| (parse_reg): Use ISSPACE/TOLOWER/ISALNUM instead of |
| isspace/tolower/isalnum. |
| (parse_creg): Use ISSPACE/TOLOWER instead of isspace/tolower. |
| (parse_psrmod): Use TOLOWER instead of isascii/tolower. |
| (parse_exp, parse_mem, md_assemble): Use ISSPACE instead of |
| isspace. |
| * config/tc-mips.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (mips_ip): Use ISSPACE/ISDIGIT instead of isspace/isdigit. |
| (mips16_ip): Use ISLOWER/ISDIGIT instead of islower/isdigit. |
| (my_getSmallExpression): Use ISDIGIT/TOLOWER instead of |
| isdigit/tolower. |
| (tc_get_register): Likewise. |
| (get_number): Use ISDIGIT/ISXDIGIT instead of isdigit/isxdigit. |
| (s_mips_ent): Use ISDIGIT instead of isdigit. |
| * config/tc-mn10200.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (md_assemble): Use ISSPACE instead of isspace. |
| * config/tc-mn10300.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (md_assemble): Use ISSPACE instead of isspace. |
| * config/tc-ns32k.c: Don't include <ctype.h>. |
| * config/tc-pdp11.c: Include "safe-ctype.h". |
| (mklower): Remove function. |
| (parse_reg): Use TOLOWER instead of mklower. |
| * config/tc-pj.c: Include "safe-ctype.h". |
| (md_assemble): Use ISSPACE instead of isspace. |
| * config/tc-ppc.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (register_name): Use ISALPHA instead of isalpha. |
| (ppc_elf_suffix): Use ISALNUM/TOLOWER instead of |
| isalnum/islower/tolower. |
| (md_assemble): Use ISSPACE instead of isspace. |
| (ppc_canonicalize_symbol_name): Use ISLOWER/TOUPPER instead of |
| islower/toupper. |
| * config/tc-s390.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (register_name): Use ISALPHA instead of isalpha. |
| (s390_elf_suffix, s390_lit_suffix): Use ISALNUM instead of isalnum. |
| (md_gather_operands, md_assemble, s390_insn): Use ISSPACE instead of |
| isspace. |
| * config/tc-sh.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (sh_elf_suffix): Use ISALNUM/TOLOWER instead of |
| isalnum/islower/tolower. |
| (IDENT_CHAR): Use ISALNUM instead of isalnum. |
| (parse_reg): Use TOLOWER instead of tolower. |
| (find_cooked_opcode): Use TOLOWER instead of isupper/tolower. |
| * config/tc-sparc.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (sparc_ip): Use ISLOWER/ISDIGIT instead of islower/isdigit. |
| (parse_keyword_arg): Use ISALNUM instead of isalnum. |
| * config/tc-tahoe.c: Include "safe-ctype.h". |
| (tahoe_reg_parse): Use ISDIGIT instead of isdigit. |
| (tip_op): Use TOLOWER instead of isupper/tolower. |
| * config/tc-tic30.c: Include "safe-ctype.h". |
| (md_begin): Use ISLOWER/ISDIGIT/ISUPPER/TOLOWER/ISLOWER/ |
| ISALPHA instead of islower/isdigit/isupper/tolower/islower/isalpha. |
| (tic30_operand): Use TOLOWER instead of tolower. |
| (tic30_find_parallel_insn): Likewise. |
| (output_invalid): Use ISPRINT instead of isprint. |
| * config/tc-tic54x.c: Include "safe-ctype.h". |
| (tic54x_asg, tic54x_eval): Use ISALPHA instead of isalpha. |
| (lookup_version): Use TOUPPER instead of toupper. |
| (tic54x_var): Use ISALPHA instead of isalpha. |
| (tic54x_mlib): Use ISSPACE instead of isspace. |
| (subsym_iscons): Use TOUPPER instead of toupper. |
| (get_operands): Use ISSPACE instead of isspace. |
| (is_type): Use TOUPPER/ISDIGIT instead of toupper/isdigit. |
| (encode_indirect, encode_operand): Use TOUPPER instead of toupper. |
| (next_line_shows_parallel): Use ISSPACE instead of isspace. |
| (subsym_get_arg, subsym_substitute): Use ISDIGIT instead of isdigit. |
| (tic54x_start_line_hook, md_assemble, tic54x_start_label): Use |
| ISSPACE instead of isspace. |
| * config/tc-tic80.c: Include "safe-ctype.h". |
| (md_assemble): Use ISSPACE instead of isspace. |
| * config/tc-v850.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (system_register_name): Use ISDIGIT instead of isdigit. |
| (md_assemble): Use ISSPACE instead of isspace. |
| * config/tc-vax.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (vax_reg_parse): Use TOLOWER/ISDIGIT instead of |
| isupper/tolower/isdigit. |
| (vip_op): Use TOLOWER instead of isupper/tolower. |
| * config/tc-w65.c: Don't include <ctype.h>. |
| * config/tc-z8k.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (tohex): Use ISDIGIT/ISLOWER instead of isdigit/islower. |
| (whatreg): Use ISDIGIT instead of isdigit. |
| * ecoff.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (ecoff_directive_ent, ecoff_stab): Use ISDIGIT instead of isdigit. |
| * expr.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (integer_constant): Use ISALNUM/TOUPPER instead of |
| isalnum/islower/toupper. |
| (operand): Use TOLOWER instead of isupper/tolower. |
| * gasp.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (sb_strtol, level_0, change_base, doinstr): Use ISDIGIT instead |
| of isdigit. |
| (process_assigns, whatcond): Use TOUPPER instead of toupper. |
| (chartype_init): Use ISALPHA/ISDIGIT instead of isalpha/isdigit. |
| (main): For gettext, also set the LC_CTYPE locate facet. |
| * hash.c: Include "safe-ctype.h". |
| (main): Use TOLOWER instead of isupper/tolower. |
| * itbl-lex.l: Don't include <ctype.h>. |
| * listing.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (listing_newline): Use ISCNTRL instead of isascii/iscntrl. Don't |
| omit non-ASCII characters. |
| (debugging_pseudo): Use ISSPACE instead of isspace. |
| * macro.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (buffer_and_nest): Use ISALNUM instead of isalnum. |
| (get_token): Use ISALPHA/ISALNUM instead of isalpha/isalnum. |
| (define_macro): Use ISUPPER/TOLOWER instead of isupper/tolower. |
| (macro_expand_body): Use ISALNUM/ISDIGIT/ISUPPER/ISALPHA |
| instead of isalnum/isdigit/isupper/isalpha. |
| (check_macro): Use ISALPHA/ISALNUM/ISUPPER/TOLOWER instead |
| of isalpha/isalnum/isupper/tolower. |
| * read.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (read_a_source_file): Use ISUPPER/TOLOWER/ISDIGIT instead of |
| isupper/tolower/isdigit. |
| (s_mri_common): Use ISDIGIT instead of isdigit. |
| (s_mri_sect): Use ISDIGIT/TOUPPER instead of isdigit/toupper. |
| (s_float_space): Use ISALPHA instead of isalpha. |
| (ignore_rest_of_line): Use ISPRINT instead of isprint. |
| (float_cons): Use ISALPHA instead of isalpha. |
| (next_char_of_string): Use ISDIGIT/ISXDIGIT instead of |
| isdigit/isxdigit. |
| * symbols.c: Include "safe-ctype.h" instead of <ctype.h>. |
| (save_symbol_name): Use ISLOWER/TOUPPER instead of |
| islower/toupper. |
| (symbol_find_base): Use TOUPPER instead of islower/toupper. |
| (decode_local_label_name): Use ISDIGIT instead of isdigit. |
| |
| 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com> |
| |
| * tc-s390.c (s390_insn): Add code to cope with 6 byte O_constants |
| in 64 bit mode and make format "e" work. |
| |
| 2001-09-18 Alan Modra <amodra@bigpond.net.au> |
| |
| * dwarf2dbg.c (dwarf2_directive_file): Avoid signed/unsigned warning. |
| |
| * write.c (set_symtab): Update bfd_alloc declaration. Use a temp |
| var to ensure bfd_alloc arg is the right type. |
| (write_object_file): Cast args of bfd_seek. Replace bfd_write with |
| bfd_bwrite. |
| |
| * config/obj-coff.c: Replace calls to bfd_write with calls to |
| bfd_bwrite. Cast args of bfd_seek. |
| |
| * config/obj-elf.c (obj_elf_change_section): Avoid signed/unsigned |
| warning. |
| |
| * config/tc-mn10300.c (set_arch_mach): Make param unsigned. |
| |
| * config/tc-tic54x.c (tic54x_mlib): Replace bfd_read call with |
| call to bfd_bread. |
| |
| 2001-09-15 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * config/tc-sh.h (sh_force_relocation): Prototype. |
| (struct fix): Forward declare. |
| * config/tc-sh.c (type sh_operand_info): Move to top of file. |
| (cons, s_align_bytes): Remove old-type declarations. |
| (sh_elf_suffix, parse_reg, dot, parse_exp, parse_at, get_operand, |
| get_operands, get_specific, insert, build_relax, |
| insert_loop_bounds, build_Mytes): Prototype. |
| (little): Make static. Prototype. |
| (check, tc_Nout_fix_to_chars): Delete unused functions. |
| |
| 2001-09-14 Eric Christopher <echristo@redhat.com> |
| |
| * config/tc-mips.c (md_parse_option): Remove setting mips_64 via |
| -mgp32/mgp64. |
| |
| 2001-09-14 Kevin Lo <kevlo@openbsd.org> |
| |
| * configure.in: Add arm-openbsd target. |
| * configure: Regenerate. |
| |
| 2001-09-14 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * configure.in: Change machine triplets from mips-*-linux-gnu* to |
| mips*-*-linux*. |
| |
| 2001-09-12 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (append_insn): Don't rightshift BFD_RELOC_16_PCREL. |
| |
| 2001-09-11 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-alpha.c (alpha_elf_section_letter): New. |
| (alpha_elf_section_flags): New. |
| * config/tc-alpha.h (md_elf_section_letter): New. |
| (md_elf_section_flags): New. |
| * config/tc-ia64.c (ia64_elf_section_letter): New. |
| * config/tc-ia64.h (md_elf_section_letter): New. |
| |
| 2001-09-11 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/obj-elf.c (obj_elf_parse_section_letters): Use 'M' instead |
| of 'm', 'S' instead of 's'. Update bad_msg. |
| * config/tc-ppc.c (ppc_section_letter): Update bad_msg. |
| * config/tc-i370.c (i370_sectioN_letter): Update bad_msg. |
| |
| 2001-09-09 Alan Modra <amodra@bigpond.net.au> |
| |
| * expr.c (expr): Move code setting "retval" to the end of the loop, |
| and rearrange for efficiency. For "PIC code" subtraction, use |
| "rightseg" rather than recalculating. For "symbol OP symbol" |
| subtract, set "retval" to absolute_section if symbols in same |
| section. |
| * symbols.c (resolve_symbol_value): Resolve "sym +/- expr" to an |
| O_symbol. Simplify a +/- b code. Allow equality and non-equality |
| comparisons on symbols from any section. Allow other comparison |
| operators as for subtraction. |
| (symbol_equated_reloc_p): New predicate function. |
| * symbols.h (symbol_equated_reloc_p): Declare. |
| * write.c (relax_segment <rs_machine_dependent>): Ensure segment |
| for expression syms is set correctly. |
| (adjust_reloc_syms): Use symbol_equated_reloc_p. |
| (write_relocs): Likewise. |
| (write_object_file): Likewise. |
| * config/tc-mips.c (md_estimate_size_before_relax): Likewise. |
| * config/tc-i386.c (md_assemble <Output jumps>): Don't lose part |
| of a complex expression when setting up frag_var. |
| |
| 2001-09-07 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-alpha.c (alpha_reloc_op_tag): Replace need_seq with |
| require_seq and allow_seq. Let !literal omit the sequence number. |
| (tokenize_arguments): Reject sequence numbers of !allow_seq. |
| |
| 2001-09-08 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/tc-sparc.c (md_apply_fix3): Handle relocs against SEC_MERGE |
| section symbols the same way as externs. |
| |
| 2001-09-07 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (s_mipsset): Reallow unrestricted use of .set mipsX |
| pseudo-op. |
| |
| 2001-09-07 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (append_insn): Handle BFD_RELOC_16_PCREL. |
| (macro_build): Use BFD_RELOC_16_PCREL_S2 only for embedded |
| PIC, BFD_RELOC_16_PCREL for the rest. |
| (mips_ip): Likewise. |
| (md_pcrel_from): return the right offset for the differently shifted |
| pcrel relocs. |
| (md_apply_fix): Handle BFD_RELOC_16_PCREL. |
| |
| 2001-09-05 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-ia64.c (FUNC_IPLT_RELOC): New. |
| (pseudo_func): Add @iplt. |
| (pseudo_opcode): Add data16 and data16.ua. |
| (md_begin): Set iplt pseudo. |
| (ia64_cons_fix_new): Handle 16 byte iplt reloc specially. |
| |
| 2001-09-04 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-alpha.c (struct alpha_insn): Make sequence scalar long. |
| (MACRO_LITERAL, MACRO_BASE, MACRO_BYTOFF, MACRO_JSR): Remove. |
| (alpha_macros): Remove occurrences of same. |
| (O_lituse_addr, O_gprel): New. |
| (DUMMY_RELOC_LITUSE_*): New. |
| (s_alpha_ucons, s_alpha_arch): Prototype. |
| (alpha_reloc_op): Construct elements via DEF macro. |
| (ALPHA_RELOC_SEQUENCE_OK): Remove. |
| (struct alpha_reloc_tag): Rename from alpha_literal_tag; rename |
| members to not be literal specific. |
| (next_sequence_num): New. |
| (md_apply_fix3): Cope with missing GPDISP_LO16. Adjust for |
| added/removed BFD relocations. |
| (alpha_force_relocation, alpha_fix_adjustable): Likewise. |
| (alpha_adjust_symtab_relocs): Handle GPDISP relocs as well. |
| (tokenize_arguments): Parse ! relocations properly. |
| (find_macro_match): Delete unused macro argument types. |
| (assemble_insn): Add reloc parameter; emit that instead of the |
| default as appropriate. |
| (get_alpha_reloc_tag): New. Split from ... |
| (emit_insn): ... here. Allocate a reloc tag for GPDISP. |
| (assemble_tokens): Don't search macros if user relocation present. |
| Copy reloc sequence number to insn struct. |
| (emit_ldgp): Remove user reloc handling. |
| (load_expression, emit_lda, emit_ldah, emit_ir_load): Likewise. |
| (emit_loadstore, emit_ldXu, emit_ldil, emit_stX): Likewise. |
| (emit_sextX, emit_division, emit_jsrjmp, emit_retjcr): Likewise. |
| * config/tc-alpha.h (tc_adjust_symtab): Always define. |
| (struct alpha_fix_tag): Name members less literal specific. |
| |
| 2001-09-04 Jeffrey A Law (law@cygnus.com) |
| |
| * tc-h8300.c (tc_gen_reloc): Give an error if we try to take the |
| address of two symbols in different sections. |
| |
| 2001-08-31 Eric Christopher <echristo@redhat.com> |
| Jason Eckhardt <jle@redhat.com> |
| |
| * config/tc-mips.c (mips_cpu_info): Add support for mipsisa32, |
| 5kc, and 20kc. Clean up old entries. |
| |
| 2001-08-31 J"orn Rennecke <amylaar@redhat.com> |
| Jeff Law <law@redhat.com> |
| |
| * config/tc-h8300.c (build_bytes): For OBJ_ELF, make relocation's |
| offset match H8 ELF spec. |
| (md_section_align): Alternate implementation for BFD_ASSEMBLER. |
| (md_apply_fix): Fix argument and return types for BFD_ASSEMBLER. |
| |
| * tc-h8300.c (relocation mappings): Remove. Moved to tc-h8300.h. |
| (build_bytes): Mark fixups for PCrel branches as signed. For |
| OBJ_ELF, make sure the reloc's offset points to the first byte |
| to be modified. |
| (md_convert_frag): Update definiton based on BFD_ASSEMBLER. |
| * tc-h8300.h (relocation mappings): Add. |
| |
| 2001-08-30 J"orn Rennecke <amylaar@redhat.com> |
| |
| * tc-h8300.c (tc_crawl_symbol_chain, tc_headers_hook): Don't |
| define for BFD_ASSEMBLER. |
| (tc_reloc_mangle): Likewise. |
| (tc_gen_reloc): New function for BFD_ASSEMBLER. |
| |
| 2001-08-29 Jeffrey A Law (law@cygnus.com) |
| |
| * config/tc-h8300.c (h8300hmode): Record the machine type |
| if BFD_ASSEMBLER is defined. |
| (h8300smode, md_begin): Similarly. |
| |
| 2001-08-29 Joel Sherrill <joel@OARcorp.com> |
| |
| * configure.in (i[3456]86-*-rtems*, m68*-*-rtems*): Change |
| default from coff to elf. |
| * configure: Regenerate. |
| |
| 2001-08-29 J"orn Rennecke <amylaar@redhat.com> |
| |
| * tc-h8300.c: If OBJ_ELF, include elf/h8.h, and define |
| assorted coff relocations to the corresponding elf relocations. |
| * tc-h8300.h (TARGET_ARCH, TARGET_FORMAT): Define appropriately. |
| |
| * configure.in: Add case for h8300-*-elf. |
| * configure: Regenerate. |
| |
| 2001-08-29 J"orn Rennecke <amylaar@redhat.com> |
| |
| * doc/internals.texi (MD_PCREL_FROM_SECTION): Change |
| documentation to reflect reality. |
| |
| 2001-08-27 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (load_address): Reflect change to MAX_GPREL_OFFSET. |
| (macro): Reflect change to MAX_GPREL_OFFSET. |
| |
| 2001-08-27 Torbjorn Granlund <tege@swox.com> |
| Staffan Ulfberg <staffanu@swox.se> |
| Linus Nordberg <linus@swox.se> |
| Alan Modra <amodra@bigpond.net.au> |
| |
| * configure.in: Recognise powerpc*le*, not just powerpcle*. |
| * configure: Regenerate. |
| * config/tc-ppc.c (PPC_LO, PPC_HI, PPC_HA, PPC_HIGHER, |
| PPC_HIGHERA, PPC_HIGHEST, PPC_HIGHESTA, SEX16): New macros. |
| (md_assemble): Use them. |
| (ppc_machine): Support stub for ELF64 as well as XCOFF. |
| (md_pseudo_table): Add "llong", "quad". |
| (md_parse_option): Match default_cpu of powerpc*. |
| (ppc_arch): Likewise. |
| (ppc_subseg_align): Only for OBJ_XCOFF. |
| (ppc_target_format): Return elf64-powerpc strings for 64 bit ELF. |
| (md_begin): Select PPC_OPCODE_64 for 64 bit. |
| (ppc_insert_operand): Don't bother testing 'file' before calling |
| as_bad_where. Use as_bad_where for operand->insert errors. |
| (mapping): Add ELF64 relocation modifiers. |
| (ppc_elf_suffix): Replace symbol on BFD_RELOC_PPC64_TOC reloc |
| expressions with abs_symbol. |
| (ppc_elf_cons): Correct offset for little endian targets. |
| (ppc_elf_frob_symbol): New. |
| (md_assemble): Add support for 64 bit ELF relocs. |
| (ppc_tc): Ensure 8 byte alignment when 64 bit. |
| (ppc_is_toc_sym): Only define for OBJ_XCOFF and OBJ_ELF. Match |
| ".toc" section for 64 bit ELF. |
| (ppc_fix_adjustable): New. Macro body moved from tc-ppc.h. |
| (md_apply_fix3): Silence warning with ATTRIBUTE_UNUSED. Only do |
| the ppc_is_toc_sym check for OBJ_XCOFF and OBJ_ELF. For 64 bit, |
| use BFD_RELOC_PPC64_TOC16_DS instead of BFD_RELOC_PPC_TOC16. |
| Expand on comments, error message. Add support for 64 bit relocs, |
| and use PPC_HI etc. macros. |
| * config/tc-ppc.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define. |
| (HANDLE_ALIGN): Define to generate nops in code sections rather |
| than zeros. |
| (TC_FORCE_RELOCATION): Force for BFD_RELOC_PPC64_TOC. |
| (ELF_TC_SPECIAL_SECTIONS): Add 64 bit ELF sections. |
| (tc_fix_adjustable): Move body of macro to tc-ppc.c. |
| (ppc_fix_adjustable): Declare. |
| (tc_frob_symbol): Define. |
| (ppc_elf_frob_symbol): Declare. |
| |
| 2001-08-26 Andreas Jaeger <aj@suse.de> |
| |
| * config/tc-s390.c: Add missing prototypes |
| (md_gather_operands): Make static. |
| |
| 2001-08-26 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.h (MAX_GPREL_OFFSET): Change it to the maximum |
| allowed value, not the word beyond maximum. |
| * config/tc-mips.c (macro_build_lui): Code cleanup. |
| (macro): Reflect change to MAX_GPREL_OFFSET. |
| (mips_ip): Check explicitly against S_EX_NONE. |
| (my_get_SmallExpression): parse for %gp_rel, not %gprel. |
| (md_apply_fix): Code cleanup. |
| |
| 2001-08-24 Andreas Jaeger <aj@suse.de> |
| |
| * config/tc-ppc.h: Fix prototype declaration. |
| |
| 2001-08-23 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/tc-ia64.c (dot_endp): Set function symbol sizes. |
| * config/obj-elf.c (obj_elf_size): When size is constant, free |
| and clear symbol_get_obj(sym)->size if any. |
| |
| 2001-08-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (md_begin): Warn about incompatibility between |
| -march=FOO and -mipsN option, continue with default ISA. |
| |
| 2001-08-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (md_parse_option): #ifdef the |
| traditional/non-traditional names as it is done in mips_target_format. |
| |
| 2001-08-20 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-alpha.h (MD_APPLY_FIX3): Define. |
| * config/tc-alpha.c (md_apply_fix3): Rename from md_apply_fix; |
| use seg parameter instead of now_seg. |
| |
| 2001-08-18 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-mips.c (show): Add the missing prototype. |
| |
| 2001-08-18 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (S_EX_*): New enum for my_getSmallExpression() |
| return values. |
| (mips_ip): Use the new return values instead of characters. Add |
| support for %higher and %highest. |
| (LP): Remove. |
| (RP): Remove. |
| (my_getSmallExpression): Make parsing case insensitive and more |
| reliable. Add support for %higher and %highest. Further support to |
| parse %gprel and %neg is implemented but currently deactivated. |
| |
| 2001-08-17 Alan Modra <amodra@bigpond.net.au> |
| |
| * ecoff.c (ecoff_frob_symbol): Remove casts from bfd_get_gp_size. |
| (ecoff_build_symbols): Likewise. |
| * read.c (s_lcomm_internal): Fix signed/unsigned warning. |
| |
| 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (mips_elf_final_processing): Set elf header flags |
| for n32 ABI if appropriate. |
| |
| 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (cons_fix_new_mips): Remove. |
| * config/tc-mips.h (TC_CONS_FIX_NEW): Remove. |
| (cons_fix_new_mips): Remove. |
| |
| 2001-08-14 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * expr.c (operand)[LITERAL_PREFIXDOLLAR_HEX]: Treat $L as |
| a label, not a hex constant. |
| |
| 2001-08-13 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-v850.h: Add missing prototypes. |
| |
| 2001-08-12 Martin Schwidefsky <schwidefsky@de.ibm.com> |
| |
| * config/tc-s390.c (s390_elf_cons): Correct fixups for PLT |
| relocations. |
| |
| 2001-08-12 TAKAI Kousuke <takai@vlsi.kuee.kyoto-u.ac.jp> |
| |
| * config/tc-sparc.c (cons_fix_new_sparc): Move |
| `sparc_no_align_cons = 0;' to... |
| (s_uacons): ...here so that sparc_no_align_cons will get |
| cleared properly. |
| |
| 2001-08-11 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-mips.c: Fix a comment typo. |
| |
| 2001-08-10 Richard Sandiford <rsandifo@redhat.com> |
| |
| * config/tc-mips.c (move_register): New function. |
| (macro_build): Remove OPCODE_IS_MEMBER's gp32 argument. |
| (mips_ip): Likewise. |
| (macro2): Use move_register rather than macro_build for moves. |
| (mips16_macro): Likewise. |
| (macro): Likewise. Handle M_MOVE. |
| |
| 2001-08-10 Andreas Jaeger <aj@suse.de> |
| |
| * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes |
| to build warnings. |
| * configure: Regenerate. |
| |
| 2001-08-10 Alan Modra <amodra@bigpond.net.au> |
| |
| * as.h (alloca): Don't declare if __GNUC__. Remove an old comment. |
| Comment indentation of #pragma. |
| * macro.c (alloca): Likewise. |
| |
| * config/tc-ppc.c: Revert 2001-08-08. |
| |
| 2001-08-09 Alan Modra <amodra@bigpond.net.au> |
| |
| * symbols.c: Add missing prototypes. |
| * config/e-i386elf.c: Likewise. |
| * config/e-i386coff.c: Likewise. |
| * config/e-i386aout.c: Likewise. |
| * config/obj-coff.c: Likewise. |
| (def_symbol_in_progress, stack): Move definition. |
| * config/obj-elf.c: Add missing prototypes. |
| (obj_elf_change_section): Make static. |
| (obj_elf_parse_section_letters): Likewise. |
| (obj_elf_section_word): Likewise. |
| (obj_elf_section_type): Likewise. |
| |
| 2001-08-08 Alan Modra <amodra@bigpond.net.au> |
| |
| From 1999-10-25 Torbjorn Granlund <tege@swox.com> |
| * config/tc-ppc.c (md_apply_fix3): Replace haphazard code for |
| determining reloc type with code reading operands->reloc field. |
| |
| 2001-08-08 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/obj-elf.c (elf_copy_symbol_attributes): Make it a global |
| function, and expand old obj-elf.h OBJ_COPY_SYMBOL_ATTRIBUTES here. |
| * config/obj-elf.h (elf_copy_symbol_attributes): Declare. |
| (OBJ_COPY_SYMBOL_ATTRIBUTES): Call elf_copy_symbol_attributes. |
| |
| * output-file.c (output_file_create): Don't try to open a second |
| time as it's unnecessary. FOPEN_W was undefined too. |
| |
| 2001-08-07 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (macro_build): Replace magic constants by defines. |
| (mips_ip): Likewise. Typo. |
| |
| 2001-08-04 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (mips_abi_string): Initialize with NULL instead |
| of 0. |
| (RELAX_ENCODE): Replace bfd_vma by valueT. |
| (load_address): Formatting. |
| (macro): Likewise. Code cleanup. Typo. |
| (macro2): Formatting. |
| (md_parse_option): Typo. |
| (s_mipsset): Reorder cases to look nicer. |
| (md_estimate_size_before_relax): Formatting. Code cleanup. |
| (mips_elf_final_processing): Check against NULL instead of 0. |
| (md_obj_end): Remove ugly `' in message string. |
| (s_mips_ent): Remove ugly `' in message string. |
| |
| 2001-07-30 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (md_begin): Take -mcpu value into account even when |
| -mipsX is specified. Make both -mcpu/-march and -mcpu/-mtune pairs |
| mutually exclusive (if they are different). |
| (md_parse_option): Warn if an -march/-mtune/-mcpu/-m<cpu> option is |
| set more than once. |
| |
| 2001-08-03 Richard Sandiford <rsandifo@redhat.com> |
| |
| * config/tc-mips.c (md_apply_fix): Don't subtract the symbol value |
| from GPREL addends. |
| |
| 2001-08-02 Richard Sandiford <rsandifo@redhat.com> |
| |
| * doc/c-mips.tex (-mgp32, -mfp32): Added -mfp32, unified with -mgp32. |
| * config/tc-mips.c (mips_fp32, mips_32bit_abi): New static variables. |
| (md_long_opts): Add -mfp32 option. |
| (md_parse_option): Handle it. Set mips_32bit_abi given -mabi=32. |
| (md_show_usage): Show usage for -mfp32 and -mgp32. |
| (HAVE_32BIT_GPRS, HAVE_32BIT_FPRS): New macros. |
| (HAVE_64BIT_GPRS, HAVE_64BIT_FPRS): New macros, inverse of the above. |
| (HAVE_32BIT_ADDRESSES): New macro. |
| (load_register): Use HAVE_32BIT_GPRS to determine the register width. |
| (load_address): Use HAVE_32BIT_ADDRESSES to determine the address size. |
| (s_cprestore, s_cpadd): Likewise. |
| (macro): Use HAVE_32BIT_GPRS to determine the width of registers |
| used in branch and M_LI_D macros. Use HAVE_64BIT_FPRS to determine |
| the width registers used in M_LI_DD macros. Use HAVE_32BIT_ADDRESSES |
| to determine the width of addresses in load, store and jump macros. |
| (macro2): Use HAVE_32BIT_GPRS to determine the width of registers |
| used in set instructions; do not check the address size for them. |
| Use HAVE_32BIT_ADDRESSES to determine the width of addresses in |
| unaligned load and store macros. |
| (mips_ip): Use the new macros to check the width of a register when |
| processing float constants. Force a constant into memory if it is |
| destined for an FPR and the FPRs are wider than the GPRs. Warn about |
| odd FPR numbers if HAVE_32BIT_FPRS. Use HAVE_32BIT_GPRS rather |
| than mips_gp32 to select synthetic instructions. |
| (macro_build): Use HAVE_32BIT_GPRS rather than mips_gp32 to select |
| synthetic instructions. |
| |
| 2001-08-01 Christian Groessler <cpg@aladdin.de> |
| |
| * config/tc-z8k.c (parse_reg): If a string starts with "r", "rl", |
| "rh", "rr", "rq", or "sp" then don't automatically assume |
| it's a register name. Check whether there is a number |
| following. |
| |
| 2001-08-01 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-i386.c (lex_got): Match lower case relocation tokens. |
| Don't allocate more space than necessary for the input line copy. |
| |
| 2001-08-01 Alan Modra <amodra@bigpond.net.au> |
| |
| * read.c: Standardize error/warning messages - don't capitalise, no |
| final period or newline, don't say "ignored" or "zero assumed" for |
| as_bad messages. In some cases, change the wording to that used |
| elsewhere for similar messages. |
| * app.c: Likewise. |
| * as.c: Likewise. |
| * atof-generic.c: Likewise. |
| * cgen.c: Likewise. |
| * cond.c: Likewise. |
| * depend.c: Likewise. |
| * dwarf2dbg.c: Likewise. |
| * ecoff.c: Likewise. |
| * expr.c: Likewise. |
| * frags.c: Likewise. |
| * input-file.c: Likewise. |
| * input-scrub.c: Likewise. |
| * listing.c: Likewise. |
| * output-file.c: Likewise. |
| * stabs.c: Likewise. |
| * subsegs.c: Likewise. |
| * symbols.c: Likewise. |
| * write.c: Likewise. |
| * ecoff.c (ecoff_directive_end): Test for missing name by |
| comparing input line pointers rather than reading string. |
| (ecoff_directive_ent): Likewise. |
| * read.c (s_set): Likewise. |
| (s_align): Report a warning rather than an error for |
| alignment too large. |
| (s_comm): Check for missing symbol name. |
| (s_lcomm_internal): Likewise. |
| (s_lsym): Likewise. |
| (s_globl): Use is_end_of_line instead of looking for '\n'. |
| (s_lcomm_internal): Likewise. |
| (ignore_rest_of_line): Report a warning rather than an error. |
| |
| 2001-07-31 Geoffrey Keating <geoffk@redhat.com> |
| |
| * config/tc-ppc.c (ppc_elf_validate_fix): It's OK to have |
| any kind of relocation against a not-loaded section. |
| |
| 2001-07-30 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/obj-elf.c (obj_elf_symver): Temporarily modify lex_type |
| to include '@' in symbol names when parsing versioned symbols |
| rather than calling get_symbol_end multiple times. |
| * config/tc-i370.c (register_name): Format fixes. Don't call |
| get_symbol_end after parsing number. |
| * config/tc-mn10200.c (data_register_name): Format fixes. Hoist |
| code out of conditional. |
| (address_register_name): Likewise. |
| (other_register_name): Likewise. |
| * config/tc-mn10300.c (r_register_name): Likewise. |
| (xr_register_name): Likewise. |
| (data_register_name): Likewise. |
| (address_register_name): Likewise. |
| (other_register_name): Likewise. |
| * config/tc-ppc.c (register_name): Likewise. |
| * config/tc-s390.c (register_name): Likewise. |
| |
| 2001-07-27 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * config/tc-m68hc11.c (md_estimate_size_before_relax): Fix bsr |
| and bra relax: update fragP->fr_fix after the fixup. |
| |
| 2001-07-27 Tracy Kuhrt <Tracy.Kuhrt@microchip.com> |
| |
| * read.c (s_set): Check for missing symbol name. |
| |
| 2001-07-26 Alan Modra <amodra@bigpond.net.au> |
| |
| * write.c (relax_segment <rs_space>): Account for fr_fix. |
| |
| 2001-07-25 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-mips.c (md_estimate_size_before_relax): Make sure |
| we treat weak like extern only for ELF. |
| (mips_fix_adjustable): Make sure we don't adjust extern/weak |
| symbols only for ELF. |
| |
| 2001-07-25 Chris Demetriou <cgd@broadcom.com> |
| |
| * config/tc-mips.c: Fix spelling error in comment. |
| |
| 2001-07-25 Dave Brolley <brolley@redhat.com> |
| |
| * app.c (LEX_IS_PARALLEL_SEPARATOR): New macro. |
| (IS_PARALLEL_SEPARATOR): New macro. |
| (do_scrub_begin): Set up characters in tc_parallel_separator_chars |
| as LEX_IS_PARALLEL_SEPARATOR, if it is defined. |
| (do_scrub_chars): Handle LEX_PARALLEL_SEPARATOR chars like |
| LEX_LINE_SEPARATOR except that we go to state 1 (as if the label has |
| been seen). |
| |
| 2001-07-24 Alan Modra <amodra@bigpond.net.au> |
| |
| * Makefile.am (DEP_FLAGS): Define, add -DOBJ_MAYBE_ELF. |
| (DEP1, DEPTC, DEPOBJ, DEP2): Use it. |
| Update dependencies with "make dep-am". |
| * Makefile.in: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| |
| 2001-07-23 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-alpha.h: Fix formatting. |
| * config/tc-arc.c: Likewise. |
| * config/tc-d10v.h: Likewise. |
| * config/tc-hppa.c: Likewise. |
| * config/tc-i370.c: Likewise. |
| * config/tc-i386.h: Likewise. |
| * config/tc-i960.h: Likewise. |
| * config/tc-ia64.c: Likewise. |
| * config/tc-ia64.h: Likewise. |
| * config/tc-m32r.c: Likewise. |
| * config/tc-m68k.c: Likewise. |
| * config/tc-m88k.c: Likewise. |
| * config/tc-ns32k.c: Likewise. |
| * config/tc-pdp11.c: Likewise. |
| * config/tc-pj.h: Likewise. |
| * config/tc-s390.c: Likewise. |
| * config/tc-sparc.c: Likewise. |
| * config/tc-sparc.h: Likewise. |
| * config/tc-tic80.c: Likewise. |
| * config/tc-w65.h: Likewise. |
| |
| 2001-07-23 Alan Modra <amodra@bigpond.net.au> |
| |
| * symbols.c (S_GET_VALUE): Don't treat O_constant and local |
| symbols specially. Always resolve, adding fr_address to value. |
| * write.c (write_object_file): Don't add fr_address to sym values. |
| (relax_frag): Likewise. |
| (relax_segment): Likewise. |
| * config/obj-ieee.c (do_symbols): Likewise. |
| * config/tc-cris.c (md_convert_frag): Likewise. |
| * config/tc-fr30.c (md_convert_frag): Likewise. |
| * config/tc-i386.c (md_convert_frag): Likewise. |
| * config/tc-m32r.c (md_convert_frag): Likewise. |
| * config/tc-m68hc11.c (md_convert_frag): Likewise. |
| * config/tc-mcore.c (md_convert_frag): Likewise. |
| * config/tc-mips.c (mips16_extended_frag): Likewise. |
| * config/tc-ns32k.c (md_convert_frag): Likewise. |
| * config/tc-m68k.c (md_convert_frag_1): Likewise. |
| (BRANCHBWL, BRABSJUNC, BRABSJCOND, BRANCHBW, FBRANCH, DBCCLBR, |
| DBCCABSJ, PCREL1632, PCINDEX, ABSTOPCREL): Decrement. |
| (md_relax_table): Remove first four entries. Format. |
| (md_estimate_size_before_relax): Remove old_fix. Don't bother |
| setting fr_var. Simplify byte branch checks. |
| |
| 2001-07-23 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-hppa.c (pa_parse_nonneg_cmpsub_cmpltr): Remove |
| "isbranch" param as all calls have it set. |
| (pa_parse_neg_cmpsub_cmpltr): Likewise. |
| (pa_parse_nonneg_add_cmpltr): Likewise. Remember result of |
| strcasecmp in "nullify" var. |
| (pa_parse_neg_add_cmpltr): Likewise. |
| (pa_ip): Don't "save_s" unnecessarily. Update calls to above |
| functions. Don't print wrong conditions in error messages. |
| |
| 2001-07-23 Andreas Jaeger <aj@suse.de> |
| |
| * config/tc-s390.c (s390_force_relocation): Removed. |
| |
| * config/tc-s390.h: Remove double declaration of |
| TC_FORCE_RELOCATION. |
| |
| 2001-07-22 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-mips.c (s_mips_end): Remove unused variables. |
| (s_mips_frame): Add ATTRIBUTE_UNUSED. |
| |
| 2001-07-17 Andreas Schwab <schwab@suse.de> |
| |
| * config/tc-m68k.c (md_pseudo_table) [OBJ_ELF]: Add .file and |
| .loc. |
| (md_assemble) [OBJ_ELF]: Call dwarf2_emit_insn before emitting |
| insn. |
| * config/tc-m68k.h (DWARF2_LINE_MIN_INSN_LENGTH): Define. |
| |
| 2001-07-17 matthew green <mrg@eterna.com.au> |
| |
| * config/tc-i386.c (comment_chars): Don't use '/' as comment start if |
| TE_NetBSD. |
| (line_comment_chars): Set to '/' if TE_NetBSD. |
| |
| 2001-07-14 matthew green <mrg@eterna.com.au> |
| |
| * configure.in (i386-*-netbsdelf*): New target. |
| * configure: Regenerate. |
| |
| 2001-07-10 Mark Elbrecht <snowball3@softhome.net> |
| |
| * config/obj-coff.c (coff_frob_symbol): Don't merge if the storage |
| class of the non-debug symbol is C_NULL. |
| |
| 2001-07-10 Anders Norlander <anorland@synergenix.se> |
| |
| * doc/as.texinfo (Incbin): Fix grammatical errors. |
| |
| 2001-07-10 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * depend.c: Use FOPEN_.. macros in calls to fopen(). |
| * input-file.c: As above. |
| * itbl-ops.c: As above. |
| * listing.c: As above. |
| * output-file.c: As above. |
| * read.c: As above. |
| |
| 2001-07-08 Anders Norlander <anorland@synergenix.se> |
| |
| * read.c (s_incbin): New .incbin function. |
| * read.c (potable): Add "incbin" pseudo-op. |
| * read.h: Add s_incbin prototype. |
| * doc/as.texinfo (incbin): Document .incbin pseudo-op. |
| * NEWS: Mention new feature. |
| |
| 2001-07-07 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * ecoff.c (add_file): Only set debug_type to DEBUG_NONE if it is |
| DEBUG_UNSPECIFIED. |
| |
| 2001-07-06 John Healy <jhealy@redhat.com> |
| |
| * cgen.c (gas_cgen_save_fixups): Modified to allow more than one |
| set of fixups to be stored. |
| (gas_cgen_restore_fixups): Modified to allow the fixup chain to be |
| restored to be chosen from any that are saved. |
| (gas_cgen_swap_fixups): Modified to allow the current set of |
| fixups to be swapped with any other set that has been saved. |
| (gas_cgen_initialize_saved_fixups_array): New routine. |
| * cgen.h: Modifed prototypes for gas_cgen_save_fixups, |
| gas_cgen_restore_fixups, and gas_cgen_swap_fixups. Added definitions |
| or MAX_SAVED_FIXUP_CHAINS. |
| * config/tc-m32r.c (assemble_two_insns): Changed calls to fixup |
| store, swap and restore fuctions to reflect the new interface. |
| |
| 2001-07-06 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-m68k.c (md_estimate_size_before_relax): Catch and |
| ignore empty, ineffectual alignment frags when deciding if a |
| branch can be short. |
| |
| 2001-07-05 Steve Ellcey <sje@cup.hp.com> |
| |
| * config/tc-ia64.c (special_section): Add SPECIAL_SECTION_INIT_ARRAY |
| and SPECIAL_SECTION_FINI_ARRAY. |
| (special_section_name): Add .init_array and .fini_array. |
| (md_pseudo_table): Add init_array and fini_array. |
| (md): Add pointer_size and pointer_size_shift fields. |
| (setup_unwind_header): New static function. |
| (output_unw_records): Modify to use setup_unwind_header. |
| (generate_unwind_image, dot_endp): Modify to use md.pointer_size and |
| md.pointer_size_shift. |
| (md_begin): Initialize md.pointer_size and md.pointer_size_shift. |
| |
| 2001-07-05 Ben Elliston <bje@redhat.com> |
| |
| * README (Supported platforms): m88k no longer suffers bitrot. |
| |
| * config/tc-m88k.c (md_pseudo_table): Remove redundant "global". |
| |
| 2001-07-05 Alan Modra <amodra@bigpond.net.au> |
| |
| * struc-symbol.h (struct local_symbol): Rename lsy_offset to |
| lsy_value. Correct typos in comments. |
| * symbols.c (local_symbol_make): Update for name change. |
| (local_symbol_convert): Likewise. |
| (colon): Likewise. |
| (S_GET_VALUE): Likewise. |
| (S_SET_VALUE): Likewise. |
| (print_symbol_value_1): Likewise. |
| (resolve_symbol_value): Likewise. Don't divide local sym values |
| by OCTETS_PER_BYTE twice. |
| |
| 2001-07-04 Jim Wilson <wilson@redhat.com> |
| |
| * config/tc-ia64.c (md_pseudo_table): Add 2byte, 4byte, and 8byte. |
| |
| * config/tc-ia64.c (is_conditional_branch): Rewrite to exclude mod |
| sched branches. |
| |
| 2001-07-05 Ben Elliston <bje@redhat.com> |
| |
| * read.c (s_fill): Correct spelling error in comments. |
| |
| * doc/c-m88k.texi: New file. |
| * doc/Makefile.am (CPU_DOCS): Add c-m88k.texi. |
| * doc/Makefile.in: Regenerate. |
| * doc/all.texi: Set M880X0. |
| * doc/as.texinfo: Hook in m88k-dependent documentation. |
| |
| 2001-07-04 Eric Christopher <echristo@redhat.com> |
| |
| * doc/c-mips.texi (MIPS Opts): Document 12000 as valid cpu. |
| |
| * config/tc-mips.c (mips_cpu_info_table): Add rm5200, rm5231, rm5261, |
| and rm5721 as valid cpu strings. |
| (md_show_usage): Add rm5200, rm5231, rm5261, rm5721. |
| |
| 2001-07-04 Richard Sandiford <rsandifo@redhat.com> |
| |
| * config/tc-mips.c (md_apply_fix): Prevent addend from becoming zero |
| if it's expected to be non-zero. |
| |
| 2001-07-03 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-sh.c (sh_frob_section): Replace symbol_get_frag() with |
| fscan->fx_frag. |
| |
| * write.c (TC_FINALIZE_SYMS_BEFORE_SIZE_SEG): Default to 1. |
| (write_object_file): Set finalize_syms to |
| TC_FINALIZE_SYMS_BEFORE_SIZE_SEG just before size_segs is |
| called. |
| |
| * doc/internals.texi: Document |
| TC_FINALIZE_SYMS_BEFORE_SIZE_SEG. |
| |
| 2001-07-02 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-ppc.c: Formatting fixes. |
| |
| 2001-07-01 Ben Elliston <bje@redhat.com> |
| |
| * config/tc-m88k.c: Back out warning fixes from 2001-06-24, as |
| they cause some subtle breakage. Will fix them again later. |
| |
| 2001-06-28 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/obj-coff.c (obj_coff_ln): Treat a .ln directive |
| outside of a function as a .appline directive. |
| |
| 2001-06-28 Eric Christopher <echristo@redhat.com> |
| H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-mips.c (mips_arch): New. Use mips_arch instead |
| of mips_cpu for the ISA selection. |
| (md_longopts): Add OPTION_MARCH and OPTION_MTUNE. |
| (md_parse_option): Handle OPTION_MARCH and OPTION_MTUNE. |
| (mips_tune): New. Use mips_tune for scheduling and optimization |
| issues. |
| (append_insn): Use mips_tune and mips_arch. |
| (macro_build): Ditto. |
| (mips_ip): Ditto. |
| (md_begin): Handle mips_arch, mips_tune and mips_cpu. For |
| backwards compatability mips_cpu generates arch and tune. |
| (md_show_usage): Document new behavior. |
| |
| * doc/c-mips.texi (MIPS Opts): Document -march and -mtune. |
| Deprecate -mcpu. |
| |
| * NEWS: Update. |
| |
| 2001-06-27 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * write.c (write_object_file): Do not set finalize_syms until |
| after the segments have been sized. Some backends may still |
| need to access the syms's frags in order to adjust relaxed |
| frags. |
| |
| * config/tc-arm.c (do_ldst): Use MVN to build simple inverted |
| constants. |
| |
| 2001-06-27 Alan Modra <amodra@bigpond.net.au> |
| |
| * write.c (fixup_segment <Difference of 2 syms same seg>): Don't |
| subtract MD_PCREL_FROM_SECTION for 68k. |
| (fixup_segment <Difference of 2 syms different seg>): Only fudge |
| by adding MD_PCREL_FROM_SECTION for 68k or if not already pcrel. |
| |
| 2001-06-27 Tracy A. Kuhrt <Tracy.Kuhrt@microchip.com> |
| |
| * write.c (fixup_segment <Difference of 2 syms same seg>): If |
| pcrel, subtract MD_PCREL_FROM_SECTION value. |
| |
| 2001-06-24 Ben Elliston <bje@redhat.com> |
| |
| * stabs.c (generate_asm_file): Make local variable `len' a size_t. |
| |
| 2001-06-24 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/tc-alpha.c (tc_gen_reloc): Handle relocs against SEC_MERGE |
| section symbols the same way as externs. |
| |
| 2001-06-24 Ben Elliston <bje@redhat.com> |
| |
| * config/tc-m88k.c (md_number_to_imm): Remove; unused since 1993. |
| (emit_relocations): Ditto. |
| (s_bss): Ditto. |
| (md_begin): Reformat comments to conform to the GNU standards. |
| (md_assemble): Ditto. |
| |
| * config/tc-m88k.c (get_reg): Adjust type of `reg_prefix' to char. |
| (md_parse_option): Mark parameters as unused. |
| (md_show_usage): Ditto. |
| (calcop): Adjust type of `reg_prefix' to char. |
| (get_reg): Ditto. |
| (getval): Adjust type of local `c' to char. |
| (md_create_short_jump): Mark from_addr, to_addr params as unused. |
| (md_create_long_jump): Ditto. |
| (md_estimate_size_before_relax): Mark parameters as unused. |
| |
| * config/tc-m88k.c (md_pseudo_table): Properly terminate the table |
| to allay a possible compiler warning. |
| |
| 2001-06-22 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * doc/internals.texi (CPU backend): Document md_atof. |
| |
| 2001-06-22 Matthew Wilcox <willy@ldl.fc.hp.com> |
| |
| * config/tc-hppa.c (pre_defined_registers): Add %mrp (millicode |
| return pointer) alias for %r2 or %r31, depending on 32 or 64 bit |
| architecture. |
| |
| 2001-06-21 Philip Blundell <philb@gnu.org> |
| |
| * config/tc-arm.c (cplong_flag): Rename to long_flag. All uses |
| updated. |
| (insns): Remove entry for adrl. Add long_flag for adr. |
| (do_adr): Handle `l' suffix. |
| (do_adrl): Delete. |
| |
| 2001-06-21 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-hppa.c (CHECK_FIELD_WHERE): Define. |
| (md_apply_fix): Use it here. Replace printf with equivalent |
| as_bad_where. |
| (tc_gen_reloc): Use as_bad_where instead of as_bad. |
| (md_apply_fix): Here too. |
| * config/tc-i386.c (tc_gen_reloc): Use as_bad_where instead of as_bad. |
| * config/tc-m68k.c (tc_gen_reloc): Likewise. |
| (md_convert_frag_1): Likewise. |
| |
| 2000-06-20 Tom Rix <trix@redhat.com> |
| |
| * config/tc-ppc.c (ppc_comm): Change default alignment to 4 bytes. |
| |
| 2001-06-18 H.J. Lu <hjl@gnu.org> |
| |
| * doc/Makefile.am (info): Depend on $(MANS). |
| (as.1): Remove the prefix `$(srcdir)/'. |
| * doc/Makefile.in: Regenerated. |
| |
| * as.1: Removed. |
| |
| 2001-06-18 Philip Blundell <philb@gnu.org> |
| |
| * config/tc-arm.c (do_msr): Remove restriction on usage of |
| immediate operands. |
| |
| 2001-06-19 Alan Modra <amodra@bigpond.net.au> |
| |
| * dwarf2dbg.c (dwarf2_finish): Output file info even when no |
| line info. |
| |
| 2001-06-13 Philip Blundell <philb@gnu.org> |
| |
| * config/tc-arm.c (thumb_shift): Improve wording of error message. |
| (do_t_arit): Likewise. |
| |
| 2001-06-13 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-sh.c (md_pseudo_table): Only intercept the .file and |
| .loc pseudos if the dfwarf2 functions are available. |
| (md_assemble): Only call dwarf2_emit_insn if it is available. |
| |
| * expr.c: Fix typo in comment. |
| |
| 2001-06-12 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * doc/as.texinfo (Infix Ops): Document that comparison and |
| combiner operators can be used as infix operators. |
| |
| 2001-06-12 Peter Jakubek <pjak@snafu.de> |
| |
| * config/tc-m68k.c (parse_mri_control_operand): Fix handling |
| of AND/OR. |
| (swap_mri_condition): Add HS (alias fo CC) and LO (alias for CS). |
| (reverse_mri_condition): Likewise. |
| (swap_mri_condition): Issue warning for conditions that can not be |
| swapped. |
| (build_mri_control_operand): Fix order of operands (swapped). |
| (build_mri_control_operand): Allow upper case extension in structured |
| control directives. |
| (s_mri_else): Likewise. |
| (s_mri_next): Likewise. |
| (s_mri_for): Likewise. |
| (s_mri_if): Fix handling comment ('*') in mri mode. |
| (s_mri_while): Likewise. |
| * macro.c (macro_expand): Allow macro invocation with empty |
| extension. |
| |
| 2001-06-12 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-arm.c: Fix test for overlow of literal pool. |
| |
| 2001-06-11 H.J. Lu <hjl@gnu.org> |
| |
| * NEWS: Updated for the new -n option for the MIPS assembler. |
| |
| * config/tc-mips.c (md_show_usage): Add -n. |
| |
| * doc/as.texinfo: Document the new -n option. |
| * doc/c-mips.texi: Likewise. |
| * doc/as.1: Regenerated. |
| |
| 2001-06-10 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/obj-coff.c (obj_coff_section): Formatting fix. |
| |
| * config/tc-i386.c (md_assemble): Accept branch hints as ",pt" and |
| ",pn". |
| |
| 2001-06-08 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-mips.c (warn_nops): New variable. Set to 0 to |
| disable warning about all NOPS that the assembler generates. |
| (macro): Warn NOPS generated only if warn_nops is not 0. |
| (md_shortopts): Add `n'. |
| (md_parse_option): Set warn_nops to 1 for `n'. |
| |
| 2001-06-08 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-mips.c (mips_ip): Properly handle illegal operands. |
| |
| 2001-06-08 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-mips.c (md_apply_fix): Don't adjust common |
| extern/weak symbols for ELF. |
| (md_estimate_size_before_relax): Treat weak like extern for |
| ELF. |
| (mips_fix_adjustable): Don't adjust extern/weak symbols for |
| ELF. |
| |
| 2001-06-08 Alan Modra <amodra@bigpond.net.au> |
| |
| * Makefile.am: 'som' is not wrongly spelled 'some'. |
| * Makefile.in: Regenerate. |
| |
| * config/tc-mips.c (mips16_mark_labels): Reduce number of calls to |
| S_GET_VALUE by using a temp. |
| (append_insn): Likewise, and for S_SET_VALUE too. |
| (mips_emit_delays): Likewise. |
| (my_getExpression): Likewise. |
| (md_apply_fix): Likewise. Use "valueT" rather than "long" for "value". |
| (mips16_extended_frag): Remove code concerned with avoiding |
| locking in a frag address now that symbols are not finalized until |
| relaxation is complete. Cater for first relaxation pass having |
| bogus addresses. Use relax_marker to reliably determine whether a |
| symbol frag has been reached on the current pass. |
| |
| 2001-06-07 H.J. Lu <hjl@gnu.org> |
| |
| * configure.in: Move "mips-*-linux-gnu*" before "mips-*-gnu*". |
| * configure: Regenerate. |
| |
| 2001-06-07 H.J. Lu <hjl@gnu.org> |
| |
| * configure.in: Use MIPS_STABS_ELF for Linux/mips and remove |
| ecoff emulation. |
| * configure: Regenerate. |
| |
| 2001-06-07 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-mips.c (mips_pseudo_table): Add "extern" if |
| MIPS_STABS_ELF is defined. |
| |
| 2001-06-06 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * as.c (show_usage): Remove L from listing options. It is not a |
| generic option. |
| |
| 2001-06-06 Christian Groessler <cpg@aladdin.de> |
| |
| * config/tc-z8k.c: Removed many warnings by removing unused |
| variables and tagging unused parameters as such. |
| (md_begin): Fixed a typo (","instead of ";"). |
| (struct ctrl_table): Add parentheses to initialize array |
| correctly. |
| (struct flag_table): Likewise. |
| (struct intr_table): Likewise. |
| (struct table): Likewise. |
| (check_operand): "#if 0"'ed since it doesn't seem to be used. |
| |
| 2001-06-06 Peter Jakubek <pjak@snafu.de> |
| |
| * config/tc-m68k.c (md_show_usage): Add all supported ColdFire |
| options to list (e.g. m5206e, m5307, m5407). |
| |
| 2001-06-06 Martin Schwidefsky <schwidefsky@de.ibm.com> |
| |
| * config/tc-s390.h (TC_FORCE_RELOCATION): Always emit relocations |
| BFD_RELOC_VTABLE_INHERIT and BFD_RELOC_VTABLE_ENTRY. |
| |
| 2001-06-06 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-i386.c (md_assemble): Handle Pentium4 branch hints. |
| <JumpByte, JumpDword insn output>: Remove dead code. |
| |
| 2001-06-06 Tracy Kuhrt <Tracy.Kuhrt@microchip.com> |
| |
| * as.c (parse_args): Correct option name "listing-lhs-width2". |
| |
| 2001-06-05 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * symbols.c (S_SET_EXTERNAL): Do not override a section symbol's |
| status. |
| |
| 2001-05-30 Richard Henderson <rth@redhat.com> |
| |
| * read.c (emit_leb128_expr): Call md_cons_align. |
| |
| 2001-05-28 Jeff Sturm <jsturm@one-point.com> |
| |
| * config/tc-sparc.c (md_apply_fix3): Handle BFD_RELOC_SPARC_UA16, |
| BFD_RELOC_SPARC_UA32 and BFD_RELOC_SPARC_UA64. |
| (tc_gen_reloc): Likewise. |
| (sparc_cons_align): Don't clear sparc_no_align_cons. |
| (cons_fix_new_sparc): Substitute BFD_RELOC_SPARC_UA{16|32|64} for |
| BFD_RELOC_{16|32|64} iff sparc_no_align_cons is set. |
| |
| 2001-05-27 Alan Modra <amodra@one.net.au> |
| |
| * write.c (relax_segment <rs_space>): Check the section of a |
| symbol to determine whether it is absolute rather than comparing |
| its frag against zero_address_frag as listings play tricks with |
| frags. |
| |
| * config/tc-m68k.c (md_assemble): Ensure variable part of frag is |
| allocated in the same chunk as the fixed part. |
| |
| 2001-05-26 Alan Modra <amodra@one.net.au> |
| |
| * write.c (relax_segment <rs_space>): Calculate growth using |
| addresses before stretch. Prevent repeated error messages. |
| From Peter Jakubek <pjak@snafu.de> |
| Use as_bad_where and as_warn_where to pinpoint errors. |
| |
| 2001-05-25 Alan Modra <amodra@one.net.au> |
| |
| * symbols.c (resolve_symbol_value): Always set segment, even when |
| not finalizing symbol value. |
| |
| * config/obj-ieee.c (write_object_file): Set finalize_syms. |
| * config/obj-coff.c (write_object_file): Likewise. |
| * (size_section): Remove rs_space assert as fr_symbol is no longer |
| removed. |
| (fill_section): Likewise. |
| |
| * configure.in: Replace linuxoldld with linux*oldld. |
| * configure: Regenerate. |
| |
| From 2.11 branch 2001-03-30 Richard Henderson <rth@redhat.com> |
| * config/tc-i386.c (md_convert_frag): Don't die on local symbols |
| that have been finalized. |
| |
| * symbols.c (resolve_symbol_value): Clear sy_resolving before |
| taking exit_dont_set_value. |
| |
| * write.c (relax_segment <rs_space>): Don't zap fr_symbol when |
| relaxing. |
| |
| 2000-05-24 Tom Rix <trix@redhat.com> |
| |
| * config/obj-coff.c (add_lineno): xcoff allows negative line |
| numbers |
| * config/tc-ppc.c (ppc_stabx): fix generated symbol |
| |
| 2001-05-24 Alan Modra <amodra@one.net.au> |
| |
| * write.c (write_object_file): Set finalize_syms = 1 before |
| size_seg is called. |
| |
| 2001-05-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * config/tc-mips.c (ISA_HAS_64BIT_REGS): Add ISA_MIPS64 as 64 bit |
| architecture, remove erraneous ISA_MIPS32. |
| (md_show_usage): Add MIPS r12k support. |
| (mips_cpu_info_table): Add MIPS r12k support. |
| |
| 2001-05-22 Alan Modra <amodra@one.net.au> |
| |
| * config/tc-arc.c (md_assemble): Use is_end_of_line instead of |
| testing for NULs. |
| |
| * symbols.c (resolve_symbol_value): Remove "finalize" param, |
| instead use finalize_syms directly. Don't treat expressions |
| specially with regard to finalize_syms. Update calls to self. |
| (resolve_local_symbol): Update call to resolve_symbol_value. |
| (S_GET_VALUE): Likewise. Return resolve_symbol_value if |
| !finalize_syms. |
| * symbols.h (resolve_symbol_value): Update prototype. |
| * config/obj-aout.c (obj_crawl_symbol_chain): Update call |
| to resolve_symbol_value. |
| * config/obj-bout.c (obj_crawl_symbol_chain): Likewise. |
| * config/obj-coff.c (do_relocs_for): Likewise. |
| (yank_symbols): Likewise. |
| (fixup_segment): Likewise. |
| * config/obj-vms.c (obj_crawl_symbol_chain): Likewise. |
| * config/tc-mips.c (md_convert_frag): Likewise. |
| * config/tc-ppc.c (ppc_frob_symbol): Likewise. |
| (ppc_fix_adjustable): Likewise. |
| * dwarf2dbg.c (dwarf2dbg_estimate_size_before_relax): Likewise. |
| (dwarf2dbg_convert_frag): Likewise. |
| * ehopt.c (eh_frame_estimate_size_before_relax): Likewise. |
| (eh_frame_convert_frag): Likewise. |
| * expr.c (make_expr_symbol): Likewise. |
| * write.c (adjust_reloc_syms): Likewise. |
| (write_object_file): Likewise. |
| (relax_segment): Likewise. |
| (fixup_segment): Likewise. |
| (finalize_syms): Init to zero, and update comment. |
| (write_object_file): Set finalize_syms to 1 rather than 2. |
| * doc/internals.texi (sy_value): Mention finalize_syms. |
| (S_GET_VALUE): Remove restriction on when S_GET_VALUE can be called. |
| |
| * config/tc-m68k.c (relaxable_symbol): Only treat external symbols |
| as relaxable if embedded system, make weak syms non-relaxable. |
| Move definition.. |
| (tc_m68k_fix_adjustable): ..so it can be used here. |
| (md_apply_fix_2): Sign extend without conditional. |
| |
| * config/tc-v850.c: Update copyright. |
| |
| 2001-05-16 Jeff Johnston <jjohnstn@redhat.com> |
| |
| * cgen.c (gas_cgen_tc_gen_reloc): Changed error message when |
| howto entry is not found. |
| |
| 2001-05-15 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-mn10300.c (mn10300_force_relocation): Don't |
| optimize differences between symbols in code sections to |
| constants. |
| (mn10300_fix_adjustable): Don't adjust to section+offset |
| relocations pointing at symbols in code sections. |
| |
| 2001-05-16 Alan Modra <amodra@one.net.au> |
| |
| * config/tc-arc.c (md_assemble): Correct dwarf2_emit_insn param |
| for 8 byte insns. |
| * config/tc-i386.c (md_assemble): Call dwarf2_emit_insn before |
| opcodes are output rather than after. Delete insn_size. |
| * config/tc-v850.c (md_assemble): Similarly, but delete |
| total_insn_size. |
| |
| 2001-05-14 Richard Henderson <rth@redhat.com> |
| |
| * ehopt.c (eh_frame_convert_frag): Fix missed subtype adjustment |
| last change. |
| |
| 2001-05-14 Richard Henderson <rth@redhat.com> |
| |
| * ehopt.c (get_cie_info): Rename from eh_frame_code_alignment; |
| also collect whether to expect an FDE augmentation. |
| (check_eh_frame): Rewrite as a state machine. Track where in |
| an FDE we are located, skip any augmentation. |
| (eh_frame_estimate_size_before_relax): Get code alignment from |
| the fragment subtype. |
| (eh_frame_relax_frag, eh_frame_convert_frag): Likewise. |
| * read.c (emit_leb128_expr): Call check_eh_frame. |
| |
| 2001-05-14 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-mn10300.c (md_assemble): Anchor dwarf2 line info |
| before a relaxable insns. |
| |
| 2001-05-13 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-mn10300.c (tc_gen_reloc): Don't reject differences |
| between symbols if the base symbol is in the current section; |
| emit a PC-relative relocation instead. |
| |
| 2001-05-12 Peter Targett <peter.targett@arccores.com> |
| |
| * config/tc-arc.c: Update copyright and tidy source comments. |
| (md_pseudo_table): Add directive .cpu back as an alias for |
| .option. Add .file and .line for dwarf2 support. |
| (arc_mach_type): Make bfd_mach_arc_6 default. |
| (md_longopts): Add entry 'pre-v6' representing old command line |
| option when assembling for 'arc5' core versions. |
| (md_parse_option): Make OPTION_ARC same as OPTION_ARC6, for new |
| default behaviour. |
| (arc_code_symbol): Make symbol value for @h30 fixup expression |
| equal to O_constant. |
| (md_assemble): Call dwarf2_emit_insn. |
| Include "dwarf2dbg2.h". Formatting fixes throughout file. |
| * config/tc-arc.h (DWARF2_LINE_MIN_INSN_LENGTH): Define. |
| * doc/c-arc.texi (ARC_CORE_DEFAULT): Update to new default. |
| |
| 2001-05-11 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/tc-ia64.c (special_linkonce_name): New. |
| (make_unw_section): Map .gnu.linkonce.t.FOO text section into |
| .gnu.linkonce.ia64unw{,i}.FOO. |
| (ia64_elf_section_type): Handle .gnu.linkonce.ia64unw{,i}.FOO. |
| (dot_endp): Add comment about it. |
| |
| 2001-05-11 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-arm.c (arm_handle_align): When truncating an aligned |
| block, ensure that the low order bits of the alignment are |
| preserved. |
| |
| 2001-05-10 Alan Modra <amodra@one.net.au> |
| |
| * config/obj-vms.c (obj_crawl_symbol_chain): Don't take address of |
| symbol_next. |
| |
| * config/tc-fr30.c (md_estimate_size_before_relax): Return size of |
| current variable part of frag. |
| * config/tc-m32r.c (md_estimate_size_before_relax): Likewise. |
| * config/tc-openrisc.c (md_estimate_size_before_relax): Likewise. |
| * config/tc-m68hc11.c (RELAX_STATE): Define. |
| (RELAX_LENGTH): Define. |
| (md_estimate_size_before_relax): Handle non-relaxable cases |
| separately from relaxable cases for clarity, and return correct |
| size for multi-pass relaxation. |
| * config/tc-tahoe.c (RELAX_LENGTH): Correct. |
| (md_estimate_size_before_relax): As for tc-m68hc11.c. |
| (md_convert_frag): Remove "length_code". |
| * config/tc-vax.c (RELAX_STATE): Define. |
| (RELAX_LENGTH): Define. |
| (md_relax_table): Add missing entry. |
| (md_estimate_size_before_relax): As for tc-m68hc11.c. |
| (md_convert_frag): Remove "length_code". |
| * config/tc-ns32k.c (md_estimate_size_before_relax): Simplify and |
| don't bother setting fr_var. Return correct size for multi-pass |
| relaxation. |
| * config/tc-v850.c (md_estimate_size_before_relax): Rewrite. |
| (md_convert_frag): Don't bother clearing fr_var. |
| (md_pseudo_table): Correct initialization. |
| * config/tc-h8500.c (md_convert_frag): Don't bother clearing fr_var. |
| (md_estimate_size_before_relax): No need to set fr_var. |
| * config/tc-mcore.c (md_convert_frag): Don't bother clearing fr_var. |
| (md_estimate_size_before_relax): No need to set fr_var. |
| |
| 2001-05-09 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-ia64.c (generate_unwind_image): Align the fragment |
| beginning a function's unwind info block. |
| |
| 2001-05-09 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-mn10300.c (md_apply_fix3): Accept PC-relative relocs. |
| |
| 2001-05-08 Andreas Schwab <schwab@suse.de> |
| |
| * config/tc-m68k.c: Instead of replacing -1 by 64 in assignment to |
| fx_pcrel_adjust explicitly sign extend when reading it. |
| |
| 2001-05-08 Alan Modra <amodra@one.net.au> |
| |
| * config/tc-m68k.c (md_estimate_size_before_relax): Set fr_var |
| from md_relax_table, and combine some switch cases. |
| |
| 2001-05-06 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-mn10300.c (md_assemble): Subtract operand->shift |
| from offset in non-pcrel operands too. |
| |
| 2001-05-06 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-arm.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define. |
| * config/tc-arm.c (arm_handle_align): Do not insert more than |
| MAX_MEM_FOR_RS_ALIGN_CODE bytes. |
| (arm_frag_align_code): Use MAX_MEM_FOR_RS_ALIGN_CODE. |
| |
| 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de> |
| |
| * Makefile.am (TARG_ENV_HFILES): Add te-hppa64.h and te-hppalinux64.h. |
| Run "make dep-am". |
| * Makefile.in: Regenerate. |
| * configure.in: Remove duplicate mips-*-ecoff* entry. |
| * configure: Regenerate. |
| |
| * config/obj-ecoff.c (obj_pseudo_table): Fix terminating entry. |
| (n_names): Cast away type mismatch. |
| (ecoff_sec_sym_ok_for_reloc): Add unused attribute. |
| (obj_ecoff_frob_symbol): Likewise. |
| * ecoff.c: (add_file): Add unused attribute. |
| (ecoff_directive_begin): Likewise. |
| (ecoff_directive_bend): Likewise. |
| (ecoff_directive_def): Likewise. |
| (ecoff_directive_dim): Likewise. |
| (ecoff_directive_scl): Likewise. |
| (ecoff_directive_size): Likewise. |
| (ecoff_directive_type): Likewise. |
| (ecoff_directive_tag): Likewise. |
| (ecoff_directive_val): Likewise. |
| (ecoff_directive_endef): Likewise. |
| (ecoff_directive_end): Likewise. |
| (ecoff_directive_ent): Likewise. |
| (ecoff_directive_extern): Likewise. |
| (ecoff_directive_file): Likewise. |
| (ecoff_directive_fmask): Likewise. |
| (ecoff_directive_frame): Likewise. |
| (ecoff_directive_mask): Likewise. |
| (ecoff_directive_loc): Likewise. |
| (mark_stabs): Likewise. |
| (ecoff_stab): Likewise. |
| (ecoff_frob_symbol): Cast away type mismatch. |
| (ecoff_padding_adjust): Likewise. |
| (ecoff_build_symbols): Likewise. |
| (ecoff_build_procs): Likewise. |
| (ecoff_build_aux): Likewise. |
| (ecoff_build_strings): Likewise. |
| (ecoff_build_fdr): Likewise. |
| (ecoff_build_debug): Likewise. |
| * itbl-ops.c (itbl_assemble): Variable initialization. |
| |
| 2001-05-03 Alan Modra <amodra@one.net.au> |
| |
| * config/tc-i386.c (i386_displacement): Call as_bad for bad GOTOFF |
| expressions rather than triggering an assert. |
| |
| 2001-05-02 Johan Rydberg <jrydberg@opencores.org> |
| |
| * config/tc-openrisc.c: New file. |
| * config/tc-openrisc.h: Likewise. |
| |
| * Makefile.am: Add OpenRISC target. |
| * Makefile.in: Regenerated. |
| |
| * configure.in (openrisc-*-*): Add target. |
| * configure: Regenerated. |
| |
| 2001-05-02 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-arm.c (arm_frag_align_code): Change error message to |
| more explanatory version. |
| |
| 2001-04-29 Keith M Wesolowski <wesolows@foobazco.org> |
| |
| * config/tc-mips.c (md_parse_option): Also accept |
| elf64-tradbigmips and elf64-tradlittlemips for OPTION_64. |
| |
| 2001-04-27 David Mosberger <davidm@hpl.hp.com> |
| |
| * config/tc-ia64.c (dot_spillmem_p): Fix output_spill_?sprel_p() |
| argument passing order: predicate goes last, not first. |
| |
| 2001-04-27 Sean McNeil <sean@mcneil.com> |
| |
| * configure.in: Add arm-vxworks. |
| * configure: Regenerate. |
| |
| 2001-04-26 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/tc-arm.c (arm_handle_align): New Function: Generate |
| no-op filled alignment frags. |
| (arm_frag_align_code): New Function: Create a code alignment frag. |
| (arm_init_frag): New Function: Initialse the target dependent |
| parts of a frag. |
| |
| * config/tc-arm.h (TC_FRAG_TYPE): Define. |
| (TC_FRAG_INIT): Define. |
| (HANDLE_ALIGN): Define. |
| (md_do_align): Define. |
| |
| 2001-04-25 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * config/obj-coff.c (do_linenos_for): Check to see if the filename |
| symbol has been initialised before extracting its symbol index. |
| |
| 2001-04-24 H.J. Lu <hjl@gnu.org> |
| |
| * configure: Regenerated with the right version of autoconf. |
| |
| 2001-04-24 Christian Groessler <cpg@aladdin.de> |
| |
| * config/tc-z8k.c (build_bytes): 12 and 16 bit displacements now |
| generate R_CALLR and R_REL16 relocations |
| |
| 2000-04-20 Jason Eckhardt <jle@redhat.com> |
| |
| * config/tc-d10v.h (tc_frob_label): Update the symbol's frag |
| since frag_now can change after d10v_cleanup is called. |
| |
| 2001-04-16 David O'Brien <obrien@FreeBSD.org> |
| |
| * configure.in: Add the em type for FreeBSD targets. |
| * configure: Regenerate. |
| |
| 2001-04-14 Alexandre Oliva <aoliva@redhat.com> |
| |
| * struc-symbol.h (struct local_symbol): New TC_LOCAL_SYMFIELD_TYPE. |
| * symbols.c (local_symbol_convert): Call TC_LOCAL_SYMFIELD_CONVERT. |
| |
| * config/tc-mn10300.c (md_assemble): Simplify offset adjustment of |
| pc-relative relocations not placed at the end of the instruction. |
| |
| 2001-04-13 Jim Wilson <wilson@redhat.com> |
| |
| * tc-ia64.c (is_conditional_branch): Return true for br, brl, and br. |
| excluding br.i. |
| |
| 2001-04-13 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/obj-elf.c (obj_elf_change_section): Add entsize argument, |
| handle SHF_MERGE and SHF_STRINGS. |
| (obj_elf_parse_section_letters): Set SHF_MERGE and SHF_STRINGS. |
| (obj_elf_section): Allow additional argument specifying entity size. |
| * write.c (adjust_reloc_syms): Keep relocations against local symbols |
| in SEC_MERGE sections. |
| |
| 2001-04-12 Jason Merrill <jason_merrill@redhat.com> |
| |
| * dwarf2dbg.c (process_entries): Don't optimize redundant line notes. |
| |
| 2001-04-12 Alexandre Oliva <aoliva@redhat.com> |
| |
| * expr.c (operand): Pass &c to md_parse_name(). |
| * config/tc-ia64.h, config/tc-ppc.h, config/tc-tic54x.h: Adjust. |
| |
| 2001-04-07 Steven J. Hill <sjhill@cotw.com> |
| |
| * config/tc-mips.c: Support ELF64 for traditional MIPS targets. |
| |
| * Makefile.am: (TARG_ENV_HFILES): Add tc-mips.h. |
| * Makefile.in: Regenerated. |
| |
| * configure.in: Use traditional MIPS targets for Linux/MIPS. |
| * configure: Regenerated. |
| |
| 2001-04-06 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-mn10300.c (xr_registers): Added `pc'. |
| |
| 2001-04-05 Alan Modra <alan@linuxcare.com.au> |
| |
| * configure.in: Add h8500-*-coff and h8500-*-rtems targets. |
| * configure: Regenerate. |
| |
| * config/tc-h8500.c (md_estimate_size_before_relax): Add missing |
| cases, and always return size based on current fr_subtype. |
| (md_begin): Move initialization of md_relax_table.. |
| (md_relax_table): ..to static initializer. Set rlx_length for |
| UNDEF_WORD_DISP cases. |
| * config/tc-w65.c (md_estimate_size_before_relax): Likewise. |
| (md_begin): Likewise. |
| (md_relax_table): Likewise. |
| * config/tc-mcore.c (md_estimate_size_before_relax): Likewise. |
| (md_relax_table): Set rlx_length for UNDEF_WORD_DISP cases. |
| Set rlx_backward and rlx_forward to zero for unused states. |
| * config/tc-sh.c (md_estimate_size_before_relax): Likewise. |
| (md_relax_table): Set rlx_length for UNDEF_WORD_DISP cases. |
| (UNCOND12, UNCOND32): Remove duplicate defines. |
| |
| 2001-04-04 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/tc-cris.c (md_estimate_size_before_relax) <case |
| ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_UNDF)>: Don't emit |
| 32-bit branch, just set fragP->fr_subtype. Set fragP->fr_var. |
| <all cases>: Always set fragP->fr_var using md_cris_relax_table. |
| Add cases to cover all relax states. |
| (cris_insn_first_word_frag): New. |
| (md_assemble): Call cris_insn_first_word_frag to get the first |
| frag in an insn, not frag_more. Don't call dwarf2_emit_insn at |
| end. Drop variable insn_size. |
| (gen_bdap): Call cris_insn_first_word_frag, not frag_more. |
| (cris_sym_leading_underscore): Wrap first as_bad parameter in _(). |
| (cris_sym_no_leading_underscore, s_cris_file, s_cris_loc): Ditto. |
| |
| * write.c (write_object_file): Reset broken word state before |
| calling relax_seg. |
| |
| 2001-03-31 Alan Modra <alan@linuxcare.com.au> |
| |
| * listing.c (listing_listing): Enable listing on EDICT_NOLIST_NEXT |
| for one line if not already enabled. |
| * cond.c (s_elseif): Correct conditional assembly listing. |
| (s_else): Likewise. |
| |
| * cond.c (s_endif): Correct handling of "if .. elseif .." trees. |
| Don't abort on NULL current_cframe. |
| |
| 2001-03-30 Alan Modra <alan@linuxcare.com.au> |
| |
| * dwarf2dbg.c (dwarf2_directive_file): Fix warnings. |
| (dwarf2dbg_convert_frag): Pass `finalize_syms' to resolve_symbol_value. |
| * config/obj-aout.c (obj_crawl_symbol_chain): Likewise. |
| * config/obj-bout.c (obj_crawl_symbol_chain): Likewise. |
| * config/obj-coff.c (do_relocs_for): Likewise. |
| (yank_symbols): Likewise. |
| (fixup_segment): Likewise. |
| * config/tc-ppc.c (ppc_frob_symbol): Likewise. |
| (ppc_fix_adjustable): Likewise. |
| * config/tc-mips.c (md_convert_frag): Likewise. |
| * config/obj-vms.c (obj_crawl_symbol_chain): Likewise. |
| * ehopt.c (eh_frame_convert_frag): Likewise. |
| * expr.c (make_expr_symbol): Likewise. |
| |
| * frags.h (struct frag): Add last_fr_address. Reorder fields for |
| better packing. |
| * symbols.c (resolve_symbol_value): Don't fix expression values |
| until relaxation is complete. |
| (resolve_local_symbol): Pass `finalize_syms' to resolve_symbol_value. |
| (S_GET_VALUE): Likewise, and return unresolved expression value. |
| * write.c (finalize_syms): New. |
| (relax_and_size_seg): Split into.. |
| (relax_seg): New function, returns 1 if anything changed.. |
| (size_seg): And the remainder of relax_and_size_seg. |
| (fixup_segment): Arrange for final resolution of sym values. |
| (adjust_reloc_syms): Likewise. |
| (write_object_file): Likewise, and repeatedly call relax_seg until |
| nothing more changes. |
| (relax_segment): Return 1 if anything changed. Use correct types |
| for rs_org `target' and `after'. |
| * write.h (finalize_syms): Declare. |
| (relax_segment): Update prototype. |
| |
| * config/tc-sh.c (md_estimate_size_before_relax): Add extra |
| do-nothing cases to switch to avoid abort on a second relaxation |
| pass, and tidy code a little. |
| * config/tc-cris.c (md_estimate_size_before_relax): Likewise. |
| * config/tc-h8500.c (md_estimate_size_before_relax): Likewise. |
| * config/tc-w65.c (md_estimate_size_before_relax): Likewise. |
| * config/tc-i386.c (UNCOND_JUMP, COND_JUMP, COND_JUMP86): Decrement. |
| (md_relax_table): Remove first four unused entries. Increment |
| rlx_length by one throughout table, and update comments to suit. |
| (md_estimate_size_before_relax): Return size of current variable |
| part of frag to reflect reality when relaxing more than once. |
| * config/tc-mcore.c (COND12, UNCD12): Rename to DISP12 throughout. |
| (COND32, UNCD32): Rename to DISP32 throughout. |
| (UNDEF_WORD_DISP): Renumber to 3. |
| (md_estimate_size_before_relax): Add extra do-nothing cases. |
| * config/tc-mn10200.c (md_estimate_size_before_relax): Rewrite. |
| * config/tc-mn10300.c (md_estimate_size_before_relax): Rewrite. |
| * config/tc-ns32k.c (md_estimate_size_before_relax): Add cases to |
| handle word and dword branches. |
| |
| 2001-03-29 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/tc-cris.h (tc_fix_adjustable): Allow only |
| BFD_RELOC_CRIS_32_GOTREL of the PIC relocs. |
| * config/tc-cris.c (cris_get_pic_suffix): Correct reloc type in |
| example in comment to valid type. |
| |
| 2001-03-28 H.J. Lu <hjl@gnu.org> |
| |
| * read.c (equals): Set to local for COFF only if it hasn't been |
| defined before. |
| |
| 2001-03-28 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-hppa.c (DEFAULT_LEVEL): Define. |
| (md_begin): Use it when setting default architecture. |
| |
| 2001-03-27 Nick Papadonis <nick@coelacanth.com> |
| |
| * read.c (equals): (for COFF) default symbols to being local. |
| |
| 2001-03-27 Hans-Peter Nilsson <hp@axis.com> |
| |
| * configure.in (cris-*-*): Change default emulation to criself. |
| (cris-*-*aout*): New rule. |
| * configure: Regenerate. |
| |
| 2001-03-26 Martin Schwidefsky <schwidefsky@de.ibm.com> |
| |
| * config/tc-s390.c (tc_s390_fix_adjustable): Add test for |
| BFD_RELOC_390_GOTENT. |
| * config/tc-s390.h (TC_RELOC_RTSYM_LOC_FIXUP): Add test for |
| BFD_RELOC_390_GOTENT. |
| |
| 2001-03-26 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-s390.h (TC_FORCE_RELOCATION): Define. |
| * config/tc-s390.c (s390_force_relocation): New function: Force |
| relocations for VTINHERIT relocs. |
| |
| 2001-03-23 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * doc/as.texinfo: Put @c man begin to generate the as man page. |
| When generating man, define all the variables. Re-organize some |
| options to obtain better indentation of man page. |
| * doc/Makefile.am (MANCONF, TEXI2POD, POD2MAN): New variable. |
| (as.1): Build from as.texinfo. |
| * doc/Makefile.in: Regenerate.Index: binutils/Makefile.am |
| |
| 2001-03-25 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-i386.c (i386_scale): Accept an absolute expression for |
| scale factor, and return the end of the expression. |
| (i386_operand): Modify for above. |
| |
| 2001-03-23 Nick Clifton <nickc@redhat.com> |
| |
| * doc/as.texinfo: Document --listing-XXX command line switches. |
| Explain why listings behave differently when -pipe is used. |
| |
| 2001-03-23 Richard Sandiford <rsandifo@redhat.com> |
| |
| * write.c (fix_new_exp): Print an error if passed a register. |
| |
| 2001-03-23 Hans-Peter Nilsson <hp@axis.com> |
| |
| * config/tc-cris.c: Tweak attribution. Fix typos. PIC support. |
| (PIC_SUFFIX_CHAR): New macro. |
| (cris_get_pic_suffix, cris_get_pic_reloc_size): New functions. |
| (pic): New variable. |
| (md_longopts): New option --pic. |
| (OPTION_PIC): Define. |
| (md_estimate_size_before_relax): Tweak longish comment. |
| (md_create_long_jump): Make the long jumps generate ADD.D offset,PC. |
| (md_assemble): Handle a PIC relocation on prefix and normal |
| instruction operands. |
| <output_instruction.insn_type == CRIS_INSN_BRANCH>: Handle |
| "complex" operand expressions. Call frag_more outside |
| gen_cond_branch_32 parameter list. |
| (cris_process_instruction): Handle PIC relocs on parsed |
| operand expressions. Validize PIC reloc sizes. |
| (get_autoinc_prefix_or_indir_op): Handle PIC suffix. |
| (gen_bdap): Handle "complex" operand expressions. |
| (gen_cond_branch_32): Use as_warn_where, not as_warn. Use |
| ADD.D offset,PC as jump instruction if generating PIC. Generate |
| error instead of crashing on complex expressions. |
| (cris_number_to_imm): Add segT parameter. All callers changed. |
| Use segT parameter, not now_seg, for segment of fixup. Handle |
| PCREL relocations but check that they are fully resolved. |
| (md_parse_option): Handle OPTION_PIC. |
| (tc_gen_reloc): Handle PIC relocs. |
| (md_show_usage): Update for --pic. |
| (md_apply_fix3): Renamed from md_apply_fix. |
| (md_pcrel_from): Accept emitting PCREL relocs when ELF. |
| (md_cris_force_relocation): Force relocation for PIC relocs. |
| |
| * config/tc-cris.h: Tweak attribution. |
| (MD_APPLY_FIX3): Define. |
| (IS_CRIS_PIC_RELOC): New macro. |
| (TC_RELOC_RTSYM_LOC_FIXUP): Define. |
| (tc_fix_adjustable): Don't adjust a globally visible symbol when |
| generating ELF. |
| (tc_frob_symbol): Avoid emitting undefined symbols. |
| |
| 2001-03-20 Alan Modra <alan@linuxcare.com.au> |
| |
| * frags.h (struct frag): Add relax_marker. |
| * write.c (is_dnrange): Delete. |
| (relax_frag): Use correct types for `aim', `target', `address'. |
| Delete `offset', `was_address'. Test `relax_marker' instead of |
| using fragile (and slow) address test. |
| (relax_segment): Init and flip `relax_marker'. |
| |
| 2001-03-19 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-i386.c (md_assemble <REGISTER_WARNINGS>): Correct |
| used register name. |
| |
| 2001-03-18 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * config/tc-m68hc11.c (md_pseudo_table): Recognize xrefb to comply |
| with 'Motorola specification for assembly language input standard'. |
| |
| 2001-03-17 Richard Henderson <rth@redhat.com> |
| |
| * dwarf2dbg.c (user_filenum, user_filenum_allocated): Remove. |
| (dwarf2_directive_loc): Don't use them. |
| (dwarf2_directive_file): Reject duplicate file definitions. |
| (get_filenum): Zero allocated memory. |
| (out_file_list): Complain about missing file definitions. |
| |
| 2001-03-17 Alan Modra <alan@linuxcare.com.au> |
| |
| * read.c (do_org): Handle complex expressions. |
| * cgen.c (gas_cgen_finish_insn): Likewise. |
| |
| 2001-03-15 David Mosberger <davidm@hpl.hp.com> |
| |
| * config/tc-ia64.c (md): New member keep_pending_output. |
| (ia64_flush_pending_output): Flush only if md.keep_pending_output |
| is not set. |
| (dot_xdata): Turn on md.keep_pending_output for the duration of |
| this function. |
| (dot_xfloat_cons): Ditto. |
| (dot_xstringer): Ditto. |
| (dot_xdata_ua): Ditto. |
| (dot_xfloat_cons_ua): Ditto. |
| |
| 2001-03-15 Jim Wilson <wilson@redhat.com> |
| |
| * config/tc-ia64.c (ia64_unrecognized_line, case '['): Add local |
| label support. |
| |
| 2001-03-15 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-sh.c (parse_reg): Match capital MACH and MACL. |
| |
| 2001-03-15 DJ Delorie <dj@redhat.com> |
| |
| * stabs.c (s_stab_generic): Don't corrupt the notes obstack by |
| blindly freeing string if it isn't at the top of the obstack. |
| |
| 2001-03-13 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-i386.c (RELOC_ENUM): Define. Use throughout file. |
| (NUM_FLAG_CODE): Define. |
| (lex_got): New function. |
| (got_reloc): New global var. |
| (x86_cons_fix_new): New function. |
| (x86_cons): New function. |
| (i386_immediate): Use lex_got here, replacing inline code. Change |
| "ignoring junk.." error message to "junk.." |
| (i386_displacement): Likewise. |
| * config/tc-i386.h (TC_PARSE_CONS_EXPRESSION): Define. |
| (x86_cons): Declare. |
| (TC_CONS_FIX_NEW): Define. |
| (x86_cons_fix_new): Declare. |
| |
| 2001-03-12 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (md_begin): Always set machine type based on |
| cpu_variant. |
| |
| 2001-03-07 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-i386.c (struct _i386_insn): Rename disp_reloc to reloc. |
| (md_assemble) <smallest displacement>: Use correct field of i.op[] |
| union. |
| <JumpInterSegment output>: Use correct i.disp_reloc[]. |
| <immediate output>: Likewise. |
| |
| 2001-03-06 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (md_apply_fix3): Clear bit zero of offset in |
| BLX(1) instruction. |
| |
| 2001-03-06 Igor Shevlyakov <igor@windriver.com> |
| |
| * config/tc-m68k.c : Add 5407 to archs[] table. |
| (HAVE_LONG_BRANCH): Add mcf5407. |
| (select_control_regs): Recognize 5407. |
| |
| 2001-03-02 Dave Brolley <brolley@redhat.com> |
| |
| * config/tc-m32r.c (expand_debug_syms): Call frag_align_code rather |
| than m32r_do_align. |
| |
| 2001-03-02 Richard Sandiford <rsandifo@redhat.com> |
| |
| * config/atof-ieee.c (TC_LARGEST_EXPONENT_IS_NORMAL): New macro. |
| (gen_to_words): Print warnings if NaNs are found and the target CPU |
| does not support them. Allow largest exponent to be used in normal |
| numbers if TC_LARGEST_EXPONENT_IS_NORMAL evaluates to true. |
| |
| 2001-02-28 Andreas Jaeger <aj@suse.de>, Bo Thorsen <bo@suse.de> |
| |
| * config/tc-i386.c (tc_gen_reloc): Remove ugly hack which is not needed |
| anymore since we use bfd_elf_generic_reloc now. |
| (md_apply_fix3): Only apply hack for partial_inplace if not using RELA. |
| |
| 2001-02-27 Alan Modra <alan@linuxcare.com.au> |
| |
| * configure.in (BFD_VERSION): New. |
| (AM_INIT_AUTOMAKE): Use $BFD_VERSION. |
| * configure: Regenerate. |
| * Makefile.am: Run "make dep-am" |
| * Makefile.in: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| |
| 2001-02-26 Mark Elbrecht <snowball3@bigfoot.com> |
| |
| * config/obj-coff.c [BFD_ASSEMBLER] (obj_coff_section): Set |
| SEC_NEVER_LOAD when the 'n' flag is used. |
| Add SEC_NEVER_LOAD to matchflags. |
| |
| 2001-02-24 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * symbols.c (decode_local_label_name): Initialize message_format |
| only when an error is reported (perf pb due to I18N). |
| |
| 2001-02-23 H.J. Lu <hjl@gnu.org> |
| |
| * dwarf2dbg.c (dwarf2_directive_file): Call s_app_file (0) if |
| BFD_ASSEMBLER is not defined. |
| |
| 2001-02-23 Richard Sandiford <rsandifo@redhat.com> |
| |
| * config/tc-mn10300.c (md_apply_fix3): Don't mark a fixup as |
| done if it's against a symbol. |
| |
| 2001-02-22 Timothy Wall <twall@cygnus.com> |
| |
| * config/tc-ia64.c (ia64_target_format): Return ia64-aix-specific |
| target formats if applicable. |
| * config/te-ia64aix.h: New. Configuration for AIX5 on IA-64. |
| * Makefile.am (TARG_ENV_HFILES): Added config/te-ia64aix.h. |
| * Makefile.in: Regenerated. |
| * configure.in: Added configuration for ia64-*-aix*. |
| * configure: Regenerated. |
| |
| 2001-02-21 David Mosberger <davidm@hpl.hp.com> |
| |
| * config/tc-ia64.c (enum operand_match_result): New type. |
| (operand_match): Change return type to operand_match_result. |
| Fix all returns appropriately, adding support for returning the |
| out-of-range result. |
| (parse_operands): New locals result, error_pos, out_of_range_pos, |
| curr_out_of_range_pos. Rewrite operand matching loop to give better |
| error messages. |
| |
| 2001-02-21 David Mosberger <davidm@hpl.hp.com> |
| |
| * config/tc-ia64.c (struct unwind): Add member "prologue_count". |
| (dot_proc): Clear unwind.prologue_count to zero. |
| (dot_prologue): Increment unwind.prologue_count. |
| (dot_restore): If second operand is omitted, use |
| unwind.prologue_count -1 for "ecount" (# of additional regions to |
| pop). Decrement unwind.prologue_count by number of regions |
| popped. |
| |
| 2001-02-21 Nick Clifton <nickc@redhat.com> |
| |
| * doc/as.texinfo (Section): Note that some flags to the COFF |
| version of .section remove attributes rather than setting them. |
| |
| 2001-02-20 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-pdp11.c: Fix formatting. |
| * config/tc-pdp11.h: Likewise. |
| |
| 2001-02-20 Bo Thorsen <bo@suse.de> |
| |
| * config/tc-i386.c (tc_i386_fix_adjustable): Fix GOTPCREL GOT |
| entry. |
| |
| 2001-02-18 David O'Brien <obrien@FreeBSD.org> |
| |
| * configure.in (cpu_type, arch): Add a generic FreeBSD specification as |
| all FreeBSD platforms should look the same at this level. |
| * configure: Rebuilt. |
| * config/tc-i386.c: Add support for old FreeBSD a.out hosts. |
| |
| 2001-02-18 lars brinkhoff <lars@nocrew.org> |
| |
| * Makefile.am: Add PDP-11 target. |
| * configure.in: Likewise. |
| * config/tc-pdp11.c: New file. |
| * config/tc-pdp11.h: New file. |
| * doc/Makefile.am: Add PDP-11 documentation. |
| * doc/all.texi: Likewise. |
| * doc/as.texinfo: Likewise. |
| * doc/c-pdp11.texi: New file. |
| |
| 2001-02-16 matthew green <mrg@redhat.com> |
| |
| * cgen.c (gas_cgen_md_apply_fix3): Support BFD_RELOC_64. |
| |
| 2001-02-13 Jim Wilson <wilson@redhat.com> |
| |
| * config/tc-ia64.c (operand_match, case TAG13): Make a BFD_RELOC_UNUSED |
| reloc instead of a 0 reloc. |
| (md_apply_fix3): Check for BFD_RELOC_UNUSED instead of 0, and mark it |
| as done. |
| * config/tc-ia64.h (TC_RELOC_RTSYM_LOC_FIXUP): Likewise. |
| |
| 2001-02-13 Ian Lance Taylor <ian@zembu.com> |
| |
| * write.c (is_dnrange): Stop as soon as the address becomes |
| larger. |
| (relax_frag): Add segment parameter. Only call symbol_get_frag |
| once. Only call is_dnrange if the symbol is in the same segment, |
| and the symbol address is larger. |
| (relax_segment): Pass segment to md_relax_frag and relax_frag. |
| * write.h (relax_frag): Update declaration. |
| * config/tc-fr30.c (fr30_relax_frag): Add segment parameter. Pass |
| it to relax_frag. |
| * config/tc-m32r.c (m32r_relax_frag): Likewise. |
| * config/tc-m32r.h (md_relax_frag): Add segment parameter. |
| (m32r_relax_frag): Update declaration. |
| * config/tc-mips.h (md_relax_frag): Add segment parameter. |
| * config/tc-tic54x.h (md_relax_frag): Likewise. |
| * doc/internals.texi (CPU backend): Update documentation for |
| md_relax_frag. |
| |
| 2001-02-13 Alan Modra <alan@linuxcare.com.au> |
| |
| * doc/c-i386.texi (i386-Arch): Add "jumps"/"nojumps" blurb. |
| Mention effect of < 386 architectures on jump promotion. |
| (i386-Jumps): xref above. Don't assume long disp is 32 bits. |
| |
| * config/tc-i386.c (no_cond_jump_promotion): New. |
| (set_cpu_arch): Parse "jumps" arch modifier. |
| (insn_size): Modify usage comment. |
| (ENCODE_RELAX_STATE): Reformat and protect macro arg. |
| (SIZE_FROM_RELAX_STATE): Rename to DISP_SIZE_FROM_RELAX_STATE. |
| (TYPE_FROM_RELAX_STATE): New define. |
| (UNCOND_JUMP, COND_JUMP): Renumber. |
| (md_relax_table): Reorder to suit. |
| (COND_JUMP86): New define. |
| (md_relax_table): Handle COND_JUMP86 cases. Add a few comments. |
| (md_assemble): Create frag var for jumps of max size, encode relax |
| state for COND_JUMP86. |
| (md_estimate_size_before_relax): Handle COND_JUMP86 cases, and |
| leave conditional jumps small if no_cond_jump_promotion. |
| (md_convert_frag): Likewise. |
| |
| * expr.c (operator): Don't bump input_line_pointer for two char |
| operators. Instead return operator size via new param num_chars. |
| (expr): Use above to parse multi-char operators correctly. |
| |
| 2001-02-12 Jan Hubicka <jh@suse.cz> |
| |
| * config/tc-i386.c (i386_displacement): Fix handling of |
| BFD_RELOC_X86_64_GOTPCREL. |
| (i386_validate_fix): Likewise. |
| |
| 2001-02-12 Philip Blundell <pb@futuretv.com> |
| |
| * config/tc-arm.c (do_ldst): Improve warnings for unpredictable |
| ldrt/strt instructions. |
| |
| 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl> |
| |
| * config/tc-mips.c (macro): For M_LA_AB emit a |
| BFD_RELOC_MIPS_CALL16 relocation or a |
| BFD_RELOC_MIPS_CALL_HI16/BFD_RELOC_MIPS_CALL_LO16 pair instead of |
| BFD_RELOC_MIPS_GOT16 and |
| BFD_RELOC_MIPS_GOT_HI16/BFD_RELOC_MIPS_GOT_LO16, respectively for |
| loading the jump register when generating SVR4_PIC code. |
| |
| 2001-02-10 Chris Demetriou <cgd@broadcom.com> |
| |
| * configure.in: Make 'mipself' and 'mipsecoff' emulations |
| map to MIPS-specific files, as they used to do before the |
| change on 2000-05-21. |
| * configure: Regerate. |
| |
| 2001-02-10 Chris Demetriou <cgd@broadcom.com> |
| |
| * config/tc-mips.c (md_parse_option): Don't try to compile |
| ELF-only option code if not ELF. |
| |
| 2001-02-08 David Mosberger <davidm@hpl.hp.com> |
| |
| * config/tc-ia64.h (md_elf_section_type): New macro. |
| (ELF_TC_SPECIAL_SECTIONS): Drop .IA_64.unwind and .IA_64.unwind_info |
| (they're now handled via ia64_elf_section_type. |
| |
| * config/tc-ia64.c (unwind): New members saved_text_seg, |
| saved_text_subseg, and force_unwind_entry. |
| (optimize_unw_records): New function to optimize away unnecessary |
| unwind directives. |
| (ia64_elf_section_type): New function. |
| (output_unw_records): Generate unwind info only if the size is |
| non-zero or if it's forced for some other reason (e.g., |
| handlerdata or a personality routine). |
| (generate_unwind_image): Don't switch back to previous |
| section---stay inside the unwind info section instead so that |
| handlerdata that may follow goes into the right place. |
| (dot_handlerdata): Force generation of unwind entry and save the |
| current active text segment before generating unwind image. |
| (dot_unwentry): Force generation of unwind entry. |
| (dot_personality): Ditto. |
| (dot_endp): Generate unwind table entry only if there is |
| some unwind info or the unwind entry was forced. |
| |
| * config/tc-ia64.c (make_unw_section_name): New macro to form |
| unwind section name. |
| (generate_unwind_image): Add "text_name" argument. Use it to |
| form unwind section name. |
| (dot_handlerdata): Determine current segment (section) name and |
| pass it to generate_unwind_image(). |
| (dot_endp): Determine current segment (section) name and use |
| it to determine the appropriate unwind section name. |
| (ia64_md_do_align): Add missing ATTRIBUTE_UNUSED declarations to |
| n, fill, and max arguments. |
| |
| 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com> |
| |
| * Makefile.am: Add linux target for S/390. |
| * configure.in: Likewise. |
| * config/tc-s390.c: New file. |
| * config/tc-s390.h: New file. |
| |
| 2001-02-09 Alexandre Oliva <aoliva@redhat.com> |
| |
| * config/tc-sh.c (md_pseudo_table): Add uaquad. Use s_uacons for |
| 2byte, 4byte and 8byte. |
| |
| 2001-02-08 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-hppa.c (pa_build_unwind_subspace): Don't call |
| md_number_to_chars with size > sizeof (valueT). |
| |
| 2001-02-06 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-ia64.h (TC_RELOC_RTSYM_LOC_FIXUP): Do fixup if |
| there is no relocation. |
| |
| 2001-02-06 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-ia64.h (TC_RELOC_RTSYM_LOC_FIXUP): New. Defined. |
| |
| * config/tc-ia64.c (md_parse_option): Only accept the valid |
| ia64 options on "-axxx". |
| |
| 2001-02-05 Jim Wilson <wilson@redhat.com> |
| |
| * config/tc-ia64.c (errata_nop_necessary_p): Return 0 instead of |
| aborting for invalid operands. |
| |
| 2001-02-06 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-hppa.c (fix_new_hppa): Pass in unwind directly rather |
| than via pointer. Update all callers. |
| (UNWIND_LOW32): Define. |
| (UNWIND_HIGH32): Define. |
| (pa_build_unwind_subspace): Use the above macros instead of dumping |
| bitfields directly. Call frag_more once rather than multiple times. |
| (md_assemble): Use UNWIND_LOW32. |
| (pa_entry): Likewise |
| (pa_procend): Likewise. |
| (process_exit): Use UNWIND_HIGH32. |
| |
| 2001-02-04 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * config/tc-m68hc11.h (LISTING_HEADER): Use m68hc11_listing_header |
| function to select the header according to the cpu. |
| (md_after_pass_hook, md_do_align): Remove. |
| (md_cleanup, m68hc11_cleanup): Remove. |
| (md_pcrel_from_section): Declare. |
| * config/tc-m68hc11.c (build_dbranch_insn): Remove insn_size. |
| (build_jump_insn, build_insn): Likewise. |
| (m68hc11_listing_header): New function. |
| (m68hc11_cleanup): Remove. |
| |
| 2001-02-02 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * config/tc-m68hc11.c (relaxable_symbol): Relax externally visible |
| symbols because there is no support for shared libraries and these |
| symbols can't be overridden (unless they are weak). |
| |
| 2001-02-01 Momchil Velikov <velco@fadata.bg> |
| |
| * dwarf2dbg.c (out_debug_abbrev): Terminate the abbreviations |
| for the compilation unit with a zero byte. |
| |
| 2001-01-30 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-hppa.c (pa_ip): Support 12 bit branches to absolute |
| destinations. Correct range check for 17 and 22 bit branches. |
| |
| 2001-01-25 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-m68k.c (tc_gen_reloc): Do not abort if tcbit is |
| still set. Issue an error message instead. |
| (md_estimate_size_before_relax): Delete unused variable |
| 'buffer_address'. Fixup parentheses around if statement. |
| |
| 2001-01-23 Kazu Hirata <kazu@hxi.com> |
| |
| * as.c: Fix formatting. |
| * ehopt.c: Likewise. |
| * messages.c: Likewise. |
| * stabs.c: Likewise. |
| * symbols.c: Likewise. |
| |
| 2001-01-23 Ben Elliston <bje@redhat.com> |
| |
| * config/tc-m32r.c (m32r_handle_align): Declare type of fragp. |
| |
| 2001-01-22 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-alpha.c: Fix formatting. |
| |
| 2001-01-19 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-alpha.c: Fix formatting. |
| |
| 2001-01-18 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-alpha.c: Fix formatting. |
| |
| 2001-01-18 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (ldm_flags): Remove redundant bit from "fa" and |
| "da" flags. |
| (stm_flags): Remove redundant bit from "ed" and "da" flags. |
| |
| 2001-01-18 Alexandre Oliva <aoliva@redhat.com> |
| |
| * configure.in (cpu_type, arch): Match i386 too. |
| * configure: Rebuilt. |
| |
| 2001-01-16 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-i386.c: Fix formatting. |
| |
| 2001-01-16 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-hppa.c (tc_gen_reloc): Use SEGREL32 instead of DIR32 |
| relocs for .PARISC.unwind section. |
| |
| * config/tc-hppa.c (pa_build_unwind_subspace): Build unwind |
| depending on section flags, not just for .text. |
| |
| 2001-01-15 Jim Wilson <wilson@redhat.com> |
| |
| * config/tc-ia64.c (ia64_flush_insns): Handle unwind directives |
| not immediately followed by an instruction. |
| |
| 2001-01-15 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-m68hc11.c: Fix formatting. |
| |
| 2001-01-15 Nick Clifton <nickc@redhat.com> |
| |
| * symbols.c (colon): Change 'already defined symbol' from a |
| fatal error to an ordinary error. There is no reason why this |
| error should be fatal. |
| |
| * message.c (as_fatal): Delete output file, if one has been |
| created. |
| |
| 2001-01-14 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-hppa.h (TARGET_FORMAT): Add hppa-linux variants. |
| |
| 2001-01-14 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-alpha.c: Fix formatting. |
| * config/tc-arc.c: Likewise. |
| * config/tc-arc.h: Likewise. |
| * config/tc-d10v.c: Likewise. |
| * config/tc-i370.c: Likewise. |
| * config/tc-i386.c: Likewise. |
| * config/tc-i960.c: Likewise. |
| * config/tc-m68k.c: Likewise. |
| * config/tc-ppc.c: Likewise. |
| * config/tc-sparc.c: Likewise. |
| * config/tc-tahoe.c: Likewise. |
| * config/tc-vax.c: Likewise. |
| |
| * config/tc-arc.c: Fix formatting. |
| |
| * config/tc-arc.c: Fix formatting. |
| |
| 2001-01-14 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-hppa.c (pa_build_unwind_subspace): Use SEGREL32 for |
| both 32 and 64 bit ELF. |
| |
| * config/tc-hppa.c (pa_ip): Store `a' flag in bit zero of operand |
| and don't bother storing `m' for "ce" completer. Tidy handling of |
| 'J' and 'K' operands to suit. Handle '<' and '>' operands. |
| |
| 2001-01-14 Jan Hubicka <jh@suse.cz> |
| |
| * config/tc-i386.h (TARGET_MACH): New macro. |
| (i386_mach): Declare. |
| * config/tc-i386.c (i386_mach): New function. |
| |
| 2001-01-13 Philip Blundell <philb@gnu.org> |
| |
| * doc/as.texinfo: Fix spelling and cross-references. |
| |
| * doc/c-arm.texi: Fix typos. Say that `;' is a line separator |
| character for all systems, not just GNU/Linux. Make it explicit |
| that `-k' doesn't affect code generation, just ELF flags. |
| |
| 2001-01-13 Jan Hubicka <jh@suse.cz> |
| |
| * config/tc-i386.c (md_assemble): Check cpu_flags even for nullary |
| instructions. |
| |
| 2001-01-12 Frank Ch. Eigler <fche@redhat.com> |
| |
| * cgen.c (gas_cgen_finish_insn): Call dwarf2_emit_insn. |
| |
| 2001-01-12 Nick Clifton <nickc@redhat.com> |
| |
| * as.c (print_args): Update copyright date to 2001. |
| |
| 2001-01-12 Peter Targett <peter.targett@arccores.com> |
| |
| * doc/c-arc.texi: New file. |
| Some sections to be expanded. |
| |
| 2001-01-12 Alan Modra <alan@linuxcare.com.au> |
| |
| * config/tc-i386.c (md_longopts): Recognize "--64" only for ELF. |
| (md_parse_option): Always accept "--32". |
| |
| 2001-01-11 Peter Targett <peter.targett@arccores.com> |
| |
| * as.h (TC_ARC): Ensure struc-symbol.h included. |
| * as.c (dwarf2dbg.h): Include to remove implicit declaration |
| warnings. |
| * struc-symbol.h (SYMBOLS_NEED_BACKPOINTERS): Define. |
| (TARGET_SYMBOL_FIELDS) added. |
| |
| * doc/Makefile.am (CPU_DOCS): Added c-arc.texi. |
| * doc/c-arc.texi: New file. |
| Some sections to be expanded. |
| * doc/as.texinfo: Update command-line options. |
| Removed outdated text for ARC dependant features, instead include |
| text from above file. |
| |
| * config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS): Define local flag. |
| (TARGET_SYMBOL_FIELDS): Alias to previous definition. |
| (targ-cpu.h) header. |
| * config/tc-arc.h: |
| * config/tc-arc.c: New updated configuration for |
| ARC, including selection of core variants, and extensibility of |
| instructions, registers etc. through directives. |
| |
| * config/tc-arc.c (arc_extinst): Minor corrections for |
| error messages. |
| (arc_common) Likewise. Make alignment argument optional for local |
| symbols also, with default of zero. |
| |
| 2001-01-11 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * config/tc-m68hc11.c (md_estimate_size_before_relax): Fix |
| STATE_INDEXED_OFFSET when the symbol is undefined (16-bit offset). |
| (build_indexed_byte): Don't relax indexed byte, use 16-bit offset |
| and fix_new_exp() instead. |
| (md_convert_frag): For indexed post byte use the symbol value |
| rather than the displacement. |
| (md_relax_table): Fix indexed offset relax. |
| |
| 2001-01-11 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * config/tc-m68hc11.c (md_estimate_size_before_relax):Don't |
| relax weak symbols. |
| (relaxable_symbol): New function. |
| |
| 2001-01-11 Andreas Jaeger <aj@suse.de> |
| |
| * config/tc-i386.h (TC_RELOC_GLOBAL_OFFSET_TABLE): Removed, it's |
| not used anywhere. |
| |
| 2001-01-10 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (arm_fix_adjustable): Define for OBJ_COFF. |
| * config/tc-arm.h (obj_fix_adjustable): Define for OBJ_COFF |
| |
| 2001-01-10 Nick Clifton <nickc@redhat.com> |
| |
| * symbols.c (DOLLAR_LABEL_CHAR): New constant - the magic |
| character used to dollar local symbols. |
| (LOCAL_LABEL_CHAR): New constant - the magic character used to |
| local label symbols. |
| (dollar_label_name): Use DOLLAR_LABEL_CHAR. |
| (fb_label_name): Prefix local labels with LOCAL_LABEL_PREFIX, |
| if defined. |
| Use LOCAL_LABEL_CHAR. |
| (decode_local_label_name): Skip LOCAL_LABEL_PREFIX. |
| Use DOLLAR_LABEL_CHAR and LOCAL_LABEL_CHAR. |
| (S_IS_LOCAL): Use DOLLAR_LABEL_CHAR and LOCAL_LABEL_CHAR. |
| |
| 2001-01-08 Bo Thorsen <bo@suse.de> |
| |
| * config/tc-i386.c (i386_immediate, i386_displacement): |
| GOTPCREL check fix. |
| |
| 2001-01-07 Ian Lance Taylor <ian@zembu.com> |
| |
| * doc/c-i386.texi (i386-Arch): Remove spaces incorrectly inserted |
| in last change. |
| |
| 2001-01-07 Philip Blundell <philb@gnu.org> |
| |
| * doc/as.texinfo (Bug Reporting): Update email address for |
| reports. |
| * README: Likewise. |
| |
| 2001-01-06 Jan Hubicka <jh@suse.cz> |
| |
| * configure.in: Define DEFAULT_ARCH for i386. |
| * config/tc-i386.c (md_assemble): Return after the error message; |
| move testing for 64bit operands to proper place. |
| |
| 2001-01-06 Jan Hubicka <jh@suse.cz>, Andreas Jaeger <aj@suse.de> |
| |
| * doc/as.texinfo: Document '#' as comment character for i386 and |
| x86_64. Add AMD x86-64 into menu of machine dependent information. |
| |
| * doc/c-i386.texi: Document x86_64 extensions. |
| |
| 2001-01-05 Jan Hubicka <jh@suse.cz> |
| |
| * config/tc-i386.c (md_assemble): Handle third byte of the opcode as prefix. |
| |
| 2001-01-04 Jan Hubicka <jh@suse.cz> |
| |
| * config/tc-i386.c (cpu_arch): Add Pentium4 and modify sledgehammer entry. |
| * NEWS: Add note about Pentium4 support. |
| |
| 2001-01-04 Jan Hubicka <jh@suse.cz> |
| |
| * config/tc-i387.c (pi, pte, pt): Update. |
| (type_names): Add new types. |
| |
| 2001-01-03 Jan Hubicka <jh@suse.cz> |
| |
| * config/tc-i386.h (CpuK6, CpuAthlon, CpuSledgehammer, CpuMMX, Cpu3dnow, |
| CpuUnknown): Renumber |
| (CpuP4, CpuSSE2): New. |
| (CpuUnknownFlags): Add CpuP4 and CpuSSE2 |
| |
| 2001-01-03 Philip Blundell <pb@futuretv.com> |
| |
| * config/tc-alpha.c (alpha_force_relocation): Handle vtable |
| relocs. |
| (alpha_fix_adjustable): Likewise. |
| (md_apply_fix): Likewise. |
| |
| 2000-12-31 H.J. Lu <hjl@gnu.org> |
| |
| * listing.c (listing_message): Allocate string only if it is |
| used. |
| |
| * configure: Rebuild. |
| |
| 2000-12-31 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * doc/internals.texi (Relaxing with a table) <after relaxation>: |
| Point out caveats with generating fixups for the opcode in a frag. |
| |
| 2000-12-30 Jan Hubicka <jh@suse.cz> |
| |
| * configure.in: Add support for x86_64 and x86_64-*-linux-gnu* |
| * NEWS: Add x86_64. |
| |
| 2000-12-29 H.J. Lu <hjl@gnu.org> |
| |
| * listing.c (calc_hex): Print the variable part only if the |
| fragment type is rs_fill. |
| |
| 2000-12-29 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * doc/internals.texi (tc_conditional_pseudoop, |
| TC_LINKRELAX_FIXUP): Fix typos. |
| |
| 2000-12-28 Richard Henderson <rth@redhat.com> |
| |
| * write.c (subsegs_finish): Fix thinko last change -- don't |
| "optimize" the alignment == 0 case. |
| |
| 2000-12-28 Richard Henderson <rth@redhat.com> |
| |
| * as.h (rs_align_test): New. |
| * frags.c (NOP_OPCODE): Move default from read.c. |
| (MAX_MEM_FOR_RS_ALIGN_CODE): New default. |
| (frag_align_code): New. |
| * frags.h (frag_align_code): Declare. |
| * read.c (NOP_OPCODE): Remove. |
| (do_align): Use frag_align_code. |
| * write.c (NOP_OPCODE): Remove. |
| (get_recorded_alignment): New. |
| (cvt_frag_to_fill): Handle rs_align_test. |
| (relax_segment): Likewise. |
| (subsegs_finish): Align last subseg in section to the |
| section alignment. Use frag_align_code. |
| * write.h (get_recorded_alignment): Declare. |
| * config/obj-coff.c (size_section): Handle rs_align_test. |
| (fill_section, fixup_mdeps): Likewise. |
| (write_object_file): Use frag_align_code. |
| |
| * config/tc-alpha.c (alpha_align): Use frag_align_code. |
| (alpha_handle_align): New. |
| * config/tc-alpha.h (HANDLE_ALIGN): New. |
| (MAX_MEM_FOR_RS_ALIGN_CODE): New. |
| |
| * config/tc-i386.h (md_do_align): Use frag_align_code. |
| (MAX_MEM_FOR_RS_ALIGN_CODE): New. |
| |
| * config/tc-ia64.c (ia64_md_do_align): Don't do code alignment. |
| (ia64_handle_align): New. |
| * config/tc-ia64.h (HANDLE_ALIGN): New. |
| (MAX_MEM_FOR_RS_ALIGN_CODE): New. |
| |
| * config/tc-m32r.c (m32r_do_align): Remove. |
| (m32r_handle_align): New. |
| (fill_insn): Use frag_align_code. |
| * config/tc-m32r.h (md_do_align): Remove. |
| (HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): New. |
| * config/tc-m88k.c, config/tc-m88k.h: Similarly. |
| * config/tc-mips.c, config/tc-mips.h: Similarly. |
| |
| * config/tc-sh.c (sh_cons_align): Use rs_align_test. |
| (sh_handle_align): Likewise. Handle rs_align_code. |
| (sh_do_align): Remove. |
| * config/tc-sh.h (md_do_align): Remove. |
| (MAX_MEM_FOR_RS_ALIGN_CODE): New. |
| |
| * config/tc-sparc.c (sparc_cons_align): Use rs_align_test. |
| (sparc_handle_align): Likewise. Handle rs_align_code. |
| * config/tc-sparc.h (md_do_align): Remove. |
| (MAX_MEM_FOR_RS_ALIGN_CODE): New. |
| |
| 2000-12-22 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-d10v.c (md_assemble): set prev_seg and prev_subseg |
| when we assemble the first half of a pair. |
| |
| 2000-12-22 H.J. Lu <hjl@gnu.org> |
| |
| * config/tc-i386.c (reloc): Update the macro for non-bfd |
| assembler. |
| (BFD_RELOC_X86_64_GOTPCREL): Set to 0 for non-bfd assembler. |
| |
| 2000-12-22 H.J. Lu <hjl@gnu.org> |
| |
| * dwarf2dbg.c (dwarf2_finish): Remove #if BFD_ASSEMBLER. |
| |
| 2000-12-20 Jan Hubicka <jh@suse.cz> |
| |
| * config/tc-i386.h (i386_target_format): Define even for ELFs. |
| (QWORD_MNEM_SUFFIX): New macro. |
| (CpuK6,CpuAthlon,CpuSledgehammer, Cpu64, CpuNo64, CpuUnknownFlags): |
| New macros |
| (CpuMMX,CpuSSE,Cpu3dnow, CpuUnknown): Renumber. |
| (IgnoreSize, DefaultSize, No_?Suf, FWait, IsString, regKludge, IsPrefix, |
| ImmExt): Renumber. |
| (Size64, No_qSuf, NoRex64, Rex64): New macros. |
| (Reg64, Imm32S, Imm64, Disp32S, Disp64): New macros. |
| (Imm8, Imm8S, Imm16, Imm32, Imm1, BaseIndex, Disp8, Disp16, Disp32, |
| InOutPortReg,ShiftCount, Control, Debug, Test, FloatReg, FloatAcc, |
| SReg2, SReg3, Acc, JumpAbsolute, RegMMX, RegXMM, EsSeg, InvMem): |
| Renumber. |
| (Reg, WordReg): Add Reg64. |
| (Imm): Add Imm32S and Imm64. |
| (EncImm): New. |
| (Disp): Add Disp64 and Disp32S. |
| (AnyMem): Add Disp32S. |
| (RegRex, RegRex64): New macros. |
| (rex_byte): New type. |
| * config/tc-i386.c (set_16bit_code_flag): Kill. |
| (fits_in_unsigned_long, fits_in_signed_long): New functions. |
| (reloc): New parameter "signed"; support x86_64. |
| (set_code_flag): New. |
| (DEFAULT_ARCH): New macro; default to "i386". |
| (default_arch): New static variable. |
| (struct _i386_insn): New fields Operand_PCrel; rex. |
| (flag_16bit_code): Kill; All tests replaced to "flag_code == CODE_64BIT" |
| (flag_code): New enum and static variable. |
| (use_rela_relocations): New static variable. |
| (flag_code_names): New static variable. |
| (cpu_arch_flags): Default to CpuUnknownFlags|CpuNo64. |
| (cpu_arch): Add "sledgehammer"; Add CPUAthlon to Athlon and CpuK6 to |
| K6 and Athlon. |
| (i386_align_code): Return plain "nop" for x86_64. |
| (mode_from_disp_size): Support Disp32S. |
| (smallest_imm_type): Support Imm32S and Imm64. |
| (offset_in_range): Support size of 8. |
| (set_cpu_arch): Do not clobber to Cpu64/CpuNo64. |
| (md_pseudo_table): Add "code64"; use set_code_flat. |
| (md_begin): Emit sane error message on hash failure. |
| (tc_i386_fix_adjustable): Support x86_64 relocations. |
| (md_assemble): Support QWORD_MNEM_SUFFIX, REX registers, |
| instructions supported on particular arch just partially, |
| output of 64bit immediates, handling of Imm32S and Disp32S type. |
| (i386_immedaite): Support x86_64 relocations; support 64bit constants. |
| (i386_displacement): Likewise. |
| (i386_index_check): Cleanup; support 64bit addresses. |
| (md_apply_fix3): Support x86_64 relocation and rela. |
| (md_longopts): Add "32" and "64". |
| (md_parse_option): Add OPTION_32 and OPTION_64. |
| (i386_target_format): Call even for ELFs; choose between |
| elf64-x86-64 and elf32-i386. |
| (i386_validate_fix): Refuse GOTOFF in 64bit mode. |
| (tc_gen_reloc): Support rela relocations and x86_64. |
| (intel_e09_1): Support QWORD. |
| |
| 2000-12-15 Diego Novillo <dnovillo@redhat.com> |
| |
| * config/tc-i386.c (intel_e09_1): Only flag as a memory operand if |
| it's not an offset expression. |
| (intel_e10_1): Ditto. Also, if the operand is an offset expression, |
| keep the braces '[' and ']' in the output string. |
| (intel_e11): Ditto. Also remove comparison intel_parser.op_modifier |
| != FLAT. There is no such op_modifier. |
| |
| 2000-12-14 Michael Sokolov <msokolov@ivan.Harhan.ORG> |
| |
| * dwarf2dbg.c: If we don't have <limits.h>, try including <sys/param.h> |
| if we have it. |
| |
| 2000-12-13 Kazu Hirata <kazu@hxi.com> |
| |
| * as.h: Fix formatting. |
| * cgen.h: Likewise. |
| * dwarf2dbg.c: Likewise. |
| * input-scrub.c: Likewise. |
| * read.h: Likewise. |
| |
| 2000-12-13 Mark Elbrecht <snowball3@bigfoot.com> |
| |
| * configure.in (i386-*-msdosdjgpp): Set bfd_gas to yes. |
| configure: Regenerate. |
| |
| 2000-12-13 Michael Sokolov <msokolov@ivan.Harhan.ORG> |
| |
| * dwarf2dbg.c: #include <limits.h> only if it exists. |
| |
| 2000-12-13 Rodney Brown <RodneyBrown@mynd.com> |
| |
| * config/tc-hppa.c (pa_ip): Correct CHECK_FIELD typo. |
| (md_apply_fix): Here too. |
| |
| 2000-12-12 Jim Wilson <wilson@redhat.com> |
| |
| * config/tc-ia64.h (ia64_init): Add prototype. |
| |
| 2000-12-12 H.J. Lu <hjl@gnu.org> |
| |
| * dwarf2dbg.c: Enabled only if BFD_ASSEMBLER is defined. |
| |
| * read.h (outputting_stabs_line_debug): Change it to int. |
| * stabs.c (outputting_stabs_line_debug): Likewise. |
| |
| 2000-12-12 Geoffrey Keating <geoffk@redhat.com> |
| |
| * config/obj-bout.c (obj_crawl_symbol_chain): Don't take |
| the address of a function result. |
| |
| 2000-12-12 Franz Sirl <Franz.Sirl-kernel@lauterbach.com> |
| |
| * config/tc-ppc.c (md_pseudo_table): Add .file and .loc. |
| (md_assemble): Call dwarf2_emit_insn. |
| (shlib): Fix typo SHILB -> SHLIB. |
| (md_parse_option): Likewise. |
| (ppc_elf_validate_fix): Likewise: |
| * config/tc-ppc.h (DWARF2_LINE_MIN_INSN_LENGTH): New. |
| |
| 2000-12-12 Nick Clifton <nickc@redhat.com> |
| |
| * cgen.h: Fix formatting. |
| * input-scrub.c: Fix formatting. |
| * macro.c: Fix formatting. |
| * config/tc-mips.c: Fix formatting. |
| * doc/c-mips.texi: Fix formatting. |
| |
| 2000-12-11 Jan hubicka <jh@suse.cz> |
| |
| * config/tc-i386.c (md_assemble): Refuse 's' and 'l' suffixes in the intel |
| mode; convert 'd' suffix to 's' or 'l'; remove all DWORD_MNEM_SUFFIX |
| references. |
| (intel_e09_1): Convert QWORD to 'l' suffix for FP operations; refuse |
| otherwise. |
| * config/tc-i386.h (DWORD_MNEM_SUFFIX): Kill. |
| (No_dSuf): Kill. |
| |
| * i386.h (*_Suf): Remove No_dSuf. |
| (d_suf, wld_Suf,sld_Suf, sldx_Suf, bwld_Suf, d_FP, sld_FP, sldx_FP) |
| Remove. |
| (i386_optab): Remove 'd' in the suffixes. |
| |
| 2000-12-06 Mark Elbrecht <snowball3@bigfoot.com> |
| |
| * config/tc-i386.c (T_SHORT): Undefine before defining. |
| |
| 2000-12-05 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-mips.c: Fix formatting. |
| |
| 2000-12-04 Matthew Hiller <hiller@redhat.com> |
| |
| * config/tc-d10v.c (flag_allow_gstabs_packing): New variable. |
| (md_longopts): New options --gstabs-packing, --no-gstabs-packing. |
| (md_show_usage): Ditto. |
| (md_parse_option): Ditto. |
| (d10v_cleanup): Writes pending instruction only if |
| ! outputting_stabs_line_debug || ! flag_allow_gstabs_packing. |
| Fix compile time warning messages. |
| |
| * doc/c-d10v.texi: Documents new options. |
| |
| 2000-12-04 Matthew Hiller <hiller@redhat.com> |
| |
| * stabs.c (outputting_stabs_line_debug): New variable. |
| (stabs_generate_asm_lineno): Set outputting_stabs_line_debug at |
| function entry and unset at function exit. |
| |
| * read.h (outputting_stabs_line_debug): New extern declaration. |
| |
| * as.c: Include dwarf2dbg.h for definition of dwarf2_finish. |
| |
| * dwarf2dbg.c: Fix compile time warning messages. |
| |
| 2000-12-03 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-a29k.c: Fix formatting. |
| * config/tc-alpha.c: Likewise. |
| * config/tc-arm.c: Likewise. |
| * config/tc-cris.c: Likewise. |
| * config/tc-hppa.c: Likewise. |
| * config/tc-i370.c: Likewise. |
| * config/tc-i386.c: Likewise. |
| * config/tc-i860.c: Likewise. |
| * config/tc-i960.c: Likewise. |
| * config/tc-ia64.c: Likewise. |
| * config/tc-m68hc11.c: Likewise. |
| * config/tc-m68k.c: Likewise. |
| * config/tc-m88k.c: Likewise. |
| * config/tc-pj.c: Likewise. |
| * config/tc-ppc.c: Likewise. |
| * config/tc-sh.c: Likewise. |
| * config/tc-sparc.c: Likewise. |
| * config/tc-tahoe.c: Likewise. |
| * config/tc-vax.c: Likewise. |
| |
| 2000-12-01 Chris Demetriou <cgd@sibyte.com> |
| |
| * config/tc-mips.c (mips_ip): When calculating offsets, |
| don't accept as constant the difference between the |
| addresses of symbols in two different sections. |
| |
| * config/tc-mips.c (macro_build): Add new 'U' and 'J' operand |
| specifiers. |
| (validate_mips_insn): Likewise. Also, update 'B' operand |
| specifier to use OP_*_CODE20 constants and delete 'm' operand |
| specifier. |
| (mips_ip): Remove 'm' operand specifier, add 'U' and 'J' |
| operand specifiers. Change warning generated by 'B' operand |
| specifier to reflect its new multi-purpose usage. |
| |
| * config/tc-mips.c (mips_set_options): Use ISA_UNKNOWN rather than |
| -1, and update comment. |
| (file_mips_isa): Likewise. |
| (mips_cpu): Use CPU_UNKNOWN rather than -1, and update comment. |
| (ISA_HAS_COPROC_DELAYS, ISA_HAS_64BIT_REGS, gpr_interlocks): Use |
| ISA_* constants rather than hard-coded numbers. |
| (mips_cpu_info): New structure. |
| (mips_cpu_info_table): New table describing CPU and ISA names |
| and numbers. |
| (mips_cpu_info_from_name, mips_cpu_info_from_isa, |
| mips_cpu_info_from_cpu): New functions. |
| (mips_isa_to_str): New function to get string for ISA name. |
| (mips_cpu_to_str): Convert to use mips_cpu_info_from_cpu, and |
| return const char *. |
| (md_begin): Redo CPU and ISA selection logic, using |
| mips_cpu_info_from_*. Convert to use ISA_* constants rather |
| than hard-coded numbers. |
| (append_insn, mips_emit_delays, macro, macro2): Convert to use |
| ISA_* constants rather than hard-coded numbers. |
| (mips_ip): Convert to use mips_isa_to_str to get ISA name. |
| (md_longopts): Delete OPTION_NO_MIPS32. |
| (md_parse_option): Convert to use ISA_* constants rather than |
| hard-coded numbers. Make OPTIONS_MIPS32 case treat MIPS32 |
| as an ISA. Delete OPTION_NO_MIPS32 case. Convert OPTION_MCPU |
| to use strcasecmp to recognize "default" and to use |
| mips_cpu_info_from_name to get CPU numbers from argument. |
| (md_show_usage): Move -mips32 so it's with the rest of the ISA |
| flags. Change 4Kc, 4Kp and 4Km CPU entries to just be |
| mips32-4k. |
| (s_mipsset): Accept ISA value 32. |
| * doc/as.texinfo: Clean up MIPS options summary slightly, |
| remove -no-mips32. Add note about -mips4 and -mips32 |
| specifying those ISA levels. Delete -mips32 and -no-mips32 |
| cpu flag descriptions. |
| * doc/c-mips.texi: Add -mips32 to list of ISA switches. Clean |
| up the supported CPU switch list, and replace 4Kc, 4Km, and |
| 4Kp entries with a single mips32-4k entry. Note that you can |
| use ".set mips32". |
| |
| * config/tc-mips.c (ISA_HAS_64BIT_REGS): Add checks for ISA_MIPS5 and |
| ISA_MIPS64. |
| (md_longopts, OPTION_MIPS5, OPTION_MIPS64): Add options for |
| -mips5 and -mips64. |
| (md_parse_option): Add cases for OPTION_MIPS5 and |
| OPTION_MIPS64. |
| (md_show_usage): Mention -mips5 and -mips64 arguments. |
| (s_mipsset): Add cases for MIPS5 and MIPS64. |
| (mips_cpu_info_table): Add entries for MIPS5 and MIPS64 ISAs |
| and pseudo-CPUs. |
| * doc/as.texinfo: Mention -mips5 and -mips64 options |
| and their meanings. |
| * doc/c-mips.texi: Likewise. Also update introduction |
| and ".set" usage information. |
| |
| * config/tc-mips.c (md_show_usage): Add "sb1" to the |
| CPU list. |
| (mips_cpu_info_table): Add SB-1 entries. |
| * doc/c-mips.texi: Add "sb1" to the list of CPUs |
| known to the -mcpu option. |
| |
| * doc/as.texinfo: Correct description of MIPS -mcpu |
| option, by copying some of the text from doc/c-mips.texi. |
| |
| 2000-12-01 Joel Sherrill <joel@OARcorp.com> |
| |
| * configure.in (arm-*-rtems*, a29k-*rtems*, h8300-*-rtems*): |
| New targets. |
| (sparc*-*-rtemself*, sparc*-*-rtemsaout*): New targets. |
| (sparc*-*-rtems*): Switched from a.out to ELF. |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| * Makefile.in: Regenerate. |
| * aclocal.m4: Regenerate. |
| * po/gas.pot: Regenerate. |
| |
| 2000-11-30 Philip Blundell <pb@futuretv.com> |
| |
| * config/obj-coff.c (obj_coff_weak): Use S_SET_WEAK if it exists, |
| even in non BFD_ASSEMBLER case. |
| |
| 2000-11-30 Diego Novillo <dnovillo@redhat.com> |
| |
| * config/tc-i386.c (md_assemble): Swap i.disp_relocs when using intel |
| syntax. |
| |
| 2000-11-29 Richard Henderson <rth@redhat.com> |
| |
| * dwarf2dbg.c: Rewrite from scratch. Queue all debugging output |
| until dwarf2_finish; use relaxation to get cross-fragment offsets; |
| thread multiple subsegments properly; handle multiple code |
| sections properly; emit proper compilation unit info for assembler |
| generated debugging. |
| |
| * as.h (enum _relax_state): Add rs_dwarf2dbg. |
| * dwarf2dbg.h (struct dwarf2_line_info): Remove filename. |
| (dwarf2dbg_estimate_size_before_relax): Declare. |
| (dwarf2dbg_relax_frag, dwarf2dbg_convert_frag): Declare. |
| * write.c: Include dwarf2dbg.h. |
| (cvt_frag_to_fill): Handle rs_dwarf2dbg. |
| (relax_segment): Likewise. |
| |
| 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com> |
| |
| * config/tc-sh.c (md_convert_frag) <undefined symbol, conditional |
| jump>: Use as_bad_where instead of as_bad. Tweak error message |
| accordingly. Stabilize frag by updating fix part and resetting |
| variant part. |
| <undefined symbol, unconditional jump>: Ditto. |
| (sh_elf_cons): Cast *input_line_pointer to unsigned char when |
| indexing is_end_of_line[]. |
| (md_assemble): Initialize size to 0. |
| (md_section_align): Mark parameter seg as unused. |
| (parse_reg): Parse names case-insensitively. |
| |
| 2000-11-28 Kazu Hirata <kazu@hxi.com> |
| |
| * config/obj-aout.h: Fix formatting. |
| * config/obj-bout.h: Likewise. |
| * config/obj-coff.c: Likewise. |
| * config/obj-coff.h: Likewise. |
| * config/obj-elf.h: Likewise. |
| * config/obj-som.h: Likewise. |
| * config/obj-vms.c: Likewise. |
| * config/obj-vms.h: Likewise. |
| * config/tc-h8300.h: Likewise. |
| * config/tc-ns32k.h: Likewise. |
| * config/tc-sparc.h: Likewise. |
| * config/tc-tic54x.h: Likewise. |
| * config/tc-z8k.h: Likewise. |
| |
| 2000-11-28 Nick Clifton <nickc@redhat.com> |
| |
| * doc/as.1 (COPYING): Mention that the GNU Free Documentation |
| License is present in the sources, but not the output, and |
| also available from the GNU website. |
| (GNU Free Documentation License): Comment out this section. |
| |
| 2000-11-28 Hans-Peter Nilsson <hp@axis.com> |
| |
| * Makefile.am (CPU_OBJ_VALID): Add case to filter out invalid coff |
| targets. Remove i860 from valid a.out targets. |
| * Makefile.in: Regenerate. |
| |
| * config/tc-cris.c: Include dwarf2dbg.h. |
| (md_pseudo_table): Add .file and .loc. |
| (md_assemble): Call dwarf2_emit_insn if generating ELF. |
| (s_cris_file, s_cris_loc): New. |
| * config/tc-cris.h (DWARF2_LINE_MIN_INSN_LENGTH): Define. |
| * Makefile.am: Regenerate dependencies. |
| * Makefile.in: Regenerate. |
| |
| 2000-11-28 Alan Modra <alan@linuxcare.com.au> |
| |
| * expr.c (STANDARD_MUL_PRECEDENCE): Correct value. |
| (MRI_MUL_PRECEDENCE): Likewise. |
| (op_rank): Fix a comment typo. |
| |
| 2000-11-26 Stephane Carrez <Stephane.Carrez@worldnet.fr> |
| |
| * config/tc-m68hc11.c (build_indexed_byte): Print the offset in |
| the error message. |
| (get_operand): Fix analysis for movw/movb instructions. |
| |
| 2000-11-24 Nick Clifton <nickc@redhat.com> |
| |
| * configure.in (xscale-elf): Add target. |
| (xscale-coff): Add target. |
| * configure: Regenerate. |
| |
| * config/tc-arm.c (ARM_EXT_V5E): New ARM architecture |
| extenstion. |
| (ARM_EXT_XSCALE): New ARM architecture extension. |
| (ARM_LONGMUL): Rename to ARM_EXT_LONGMUL. |
| (ARM_HALFWORD): Rename to ARM_EXT_HALFWORD. |
| (ARM_THUMB): Rename to ARM_EXT_THUMB. |
| (ARM_ARCH_V4): Remove processor from architecture. |
| (ARM_ARCH_3M): New architecutre definition. |
| (ARM_ARCH_V5TE): New architecutre definition. |
| (ARM_ARCH_XSCALE): New architecutre definition. |
| (CPU_DEFAULT): Allow to be defaulted to XScale. |
| (atpcs): New boolean variable. |
| (ldr_flags): Support 'd' flag for double word loads. |
| (str_flags): Support 'd' flag for double word stored. |
| (do_mia): New function. |
| (do_mar): New function. |
| (do_mra): New function. |
| (do_pld): New function. |
| (do_ldrd): New function. |
| (do_blx): New function. |
| (do_bkpt): New function. |
| (do_clz): New function. |
| (do_lstc2): New function. |
| (do_cdp2): New function. |
| (do_t_blx): New function. |
| (do_t_bkpt): New function. |
| (do_smla): New function. |
| (do_smlal): New function. |
| (do_smul): New function. |
| (do_qadd): New function. |
| (do_co_reg2c): New function. |
| (LONGEST_INSN): Redefine to 7. |
| |
| * doc/c-arm.texi: Document -mxscale, -mmarmv5te and -matpcs |
| command line switches. |
| |
| 2000-11-22 Jim Wilson <wilson@redhat.com> |
| |
| * config/tc-ia64.c (pseudo_func): Add missing initializers. |
| (struct rsrc): Make line unsigned. |
| (gr_values): Add missing initializer. |
| (SLOT_NUM_NOT_SET): Add unsigned cast. |
| (ia64_elf_section_flags, output_vbyte_mem, count_output, dot_radix, |
| dot_fframe, dot_vframe, dot_vframesp, dot_vframepsp, dot_save, |
| dot_restore, dot_restorereg, dot_restorereg_p, dot_handlerdata, |
| dot_unwentry, dot_altrp, dot_saveg, dot_savef, dot_saveb, dot_savegf, |
| dot_spill, dot_spillreg, dot_spillreg_p, dot_label_state, |
| dot_copy_state, dot_unwabi, dot_personality, dot_proc, dot_body, |
| dot_prologue, dot_endp, dot_regstk, dot_psr, dot_alias, dot_ln, |
| dot_reg_val, dot_entry, dot_mem_offset, ia64_init, mark_resource, |
| md_undefined_symbol, md_apply_fix3, tc_gen_reloc, ia64_md_do_align): |
| Add ATTRIBUTE_UNUSED to unused parameters. |
| (convert_expr_to_ab_reg): Add parens. |
| (convert_expr_to_xy_reg): Add parens. Comment out >= REG_GR test. |
| (dot_prologue): Initialize grsave when declared. |
| (md_pseudo_table): Add missing initializers. |
| (operand_match): Add casts to bfd_vma. |
| (emit_one_bundle): Delete unused local prev. Make required_template |
| unsigned. |
| (specify_resource): Cast i to unsigned. |
| (note_register_values): Use fprintf_vma. |
| (print_dependency): Likewise. |
| |
| 2000-11-21 Jim Wilson <wilson@redhat.com> |
| |
| * config/tc-ia64.c (generate_unwind_image): Call record_alignment |
| for unwind info section. |
| (dot_endp): Likewise for unwind section. |
| |
| * config/tc-ia64.c (emit_one_bundle): Pass size of 8 not 4 to |
| fix_new_exp. |
| |
| 2000-11-21 Jakub Jelinek <jakub@redhat.com> |
| |
| * config/tc-sparc.c (md_pseudo_table): Add .file and .loc. |
| (output_insn): Call dwarf2_emit_insn. |
| * config/tc-sparc.h (DWARF2_LINE_MIN_INSN_LENGTH): New. |
| |
| 2000-11-17 Richard Henderson <rth@redhat.com> |
| |
| * ehopt.c (eh_frame_code_alignment): New arg `in_seg', update all |
| callers. Don't switch segments. Expect CIE == -1 in .debug_frame. |
| (check_eh_frame): Handle .eh_frame and .debug_frame concurrently. |
| |
| 2000-11-17 Nick Clifton <nickc@redhat.com> |
| |
| * config/tc-arm.c (md_pseudo_table): Add support for .line and |
| .file pseudo ops. |
| |
| 2000-11-17 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-i386.c (md_pseudo_table): Add .file and .loc. |
| |
| 2000-11-17 Richard Henderson <rth@redhat.com> |
| |
| * dwarf2dbg.c (dwarf2_gen_line_info): Early out for no line number. |
| * config/obj-elf.h (ECOFF_DEBUGGING) [TC_ALPHA]: Adjust for |
| tri-state definition of alpha_flag_mdebug. |
| * config/tc-alpha.c (alpha_flag_mdebug): Init to -1. |
| (s_alpha_file): Store first .file directive. |
| (s_alpha_stab): New. |
| (md_pseudo_table): Add stabs and stabn. |
| |
| 2000-11-17 Richard Henderson <rth@redhat.com> |
| |
| * config/tc-i386.c (md_assemble): Call dwarf2_emit_insn. |
| |
| 2000-11-17 Richard Henderson <rth@redhat.com> |
| |
| * as.c (debug_type): Init to DEBUG_UNSPECIFIED. |
| (main): Call dwarf2_finish. |
| * as.h (debug_type): Clarify documentation of the meaning |
| of this variable. |
| * dwarf2dbg.c (DWARF2_LINE_MIN_INSN_LENGTH): Default to 1. |
| (print_stats): Fix parenthesis problem. |
| (now_subseg_size): New. |
| (dwarf2_finish): Use it. If DEBUG_DWARF2, emit bits for .debug_info. |
| (dwarf2_directive_file): Don't set debug_type. |
| (dwarf2_where): Honor DEBUG_DWARF2 first. |
| (dwarf2_emit_insn): Renamed from dwarf2_generate_asm_lineno; |
| do nothing if not emitting dwarf2 debug info, or no work. |
| * dwarf2dbg.h (dwarf2_emit_insn): Update. |
| * ecoff.c (add_file): Turn on DEBUG_ECOFF only if DEBUG_UNSPECIFIED. |
| (ecoff_new_file): Likewise. |
| * read.c (generate_lineno_debug): Kill ecoff hackery. Update |
| commentary wrt dwarf2. |
| |
| * config/tc-alpha.c (alpha_adjust_symtab_relocs): Add |
| ATTRIBUTE_UNUSED as needed. |
| (emit_insn): Call dwarf2_emit_insn. |
| (s_alpha_file): New. |
| (s_alpha_loc): New. |
| (s_alpha_coff_wrapper): Don't handle them. |
| (md_pseudo_table): Update for .file and .loc. |
| * config/tc-alpha.h (DWARF2_LINE_MIN_INSN_LENGTH): New. |
| |
| * config/tc-arm.c (output_inst): Update for dwarf2_emit_insn; |
| don't protect with debug_type. |
| * config/tc-hppa.c (md_assemble): Likewise. |
| * config/tc-m68hc11.c (m68hc11_new_insn): Likewise. |
| * config/tc-mn10300.c (md_assemble): Likewise. |
| * config/tc-sh.c (md_assemble): Likewise. |
| * config/tc-v850.c (md_assemble): Likewise. |
| |
| * config/tc-arm.c (arm_end_of_source): Remove. |
| * config/tc-hppa.c (pa_end_of_source): Remove. |
| * config/tc-m68hc11.c (m68hc11_end_of_source): Remove. |
| * config/tc-mn10300.c (mn10300_finalize): Remove. |
| * config/tc-sh.c (sh_finalize): Remove. |
| * config/tc-v850.c (sh_finalize): Remove. |
| |
| * config/tc-arm.h (md_end): Remove. |
| * config/tc-hppa.h (md_end): Remove. |
| (DWARF2_LINE_MIN_INSN_LENGTH): New. |
| * config/tc-m68hc11.h (md_end): Remove. |
| * config/tc-mn10300.h (md_end): Remove. |
| * config/tc-sh.h (md_end): Remove. |
| * config/tc-v850.h (md_end): Remove. |
| |
| * config/tc-ia64.c (emit_one_bundle): Don't protect |
| dwarf2 bits with debug_type. |
| (md_assemble): Likewise. |
| (ia64_end_of_source): Don't call dwarf2_finish. |
| |
| 2000-11-16 Jim Wilson <wilson@redhat.com> |
| |
| * config/tc-ia64.c (errata_nop_necessary_p): Abort if general regno |
| >= 128 instead of > 128. Abort if predicate regno is >= 64 instead of |
| > 16. |
| |
| 2000-11-16 H.J. Lu <hjl@gnu.org> |
| |
| * config/obj-elf.c (obj_elf_symver): Don't check the missing |
| version name. |
| |
| 2000-11-15 Kazu Hirata <kazu@hxi.com> |
| |
| * config/tc-tic30.c: Fix formatting. |
| * config/tc-tic80.c: Likewise. |
| * config/tc-v850.c: Likewise. |
| * config/tc-vax.c: Likewise. |
| * config/tc-w65.c: Likewise. |
