| 2019-12-27 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (output_branch, output_jump, |
| output_interseg_jump): Also emit skipped prefix warning in Intel |
| syntax mode. Name instruction in the warning text. |
| * testsuite/gas/i386/mpx-inval-1.l, |
| testsuite/gas/i386/notrackbad.l, |
| testsuite/gas/i386/x86-64-notrackbad.l: Adjust expectations. |
| |
| 2019-12-27 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (output_branch): Handle BND prefix the same |
| way as other prefixes. Emit it last before REX. |
| (output_jump): Emit BND before REX. |
| (output_interseg_jump): Don't emit REX. |
| * testsuite/gas/i386/x86-64-branch-2.s, |
| testsuite/gas/i386/x86-64-branch-3.s, |
| testsuite/gas/i386/x86-64-mpx-branch-1.s, |
| testsuite/gas/i386/x86-64-mpx-branch-2.s: Add REX.W cases. |
| * testsuite/gas/i386/x86-64-mpx-branch-2.d: Match output against |
| x86-64-mpx-branch-1.d. |
| * testsuite/gas/i386/x86-64-branch-2.d, |
| testsuite/gas/i386/x86-64-branch-3.d, |
| testsuite/gas/i386/x86-64-mpx-branch-1.d: Adjust expectations. |
| |
| 2019-12-27 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (flip_code16): New. |
| (output_branch, output_jump): Use it. |
| (i386_displacement): Restrict template set to just direct |
| branches when handling a respective operand. Don't set Disp16 |
| when in Intel64 mode and there's a respective template. |
| * testsuite/gas/i386/i386.exp: Convert x86-64-branch-3 from list |
| to dump test. Drop its XFail again. |
| * testsuite/gas/i386/x86-64-branch-3.d: New. |
| * testsuite/gas/i386/x86-64-branch-3.l: Delete. |
| * testsuite/gas/i386/x86-64-branch-3.s: Add XBEGIN case. |
| |
| 2019-12-27 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (i386_addressing_mode): Declare. |
| (match_template): Don't transform displacement width flags for |
| non-indirect branches. Re-write transformation logic. |
| (i386_displacement): Also check BaseIndex when deciding whether |
| an operand belongs to a direct branch. Restrict which DispNN get |
| set. |
| (i386_finalize_displacement): Set Disp8 for JumpByte templates. |
| * config/tc-i386-intel.c (i386_intel_operand): Don't set Disp32 |
| for 64-bit addressing. |
| * testsuite/gas/i386/i386.exp: XFail x86-64-branch-3. |
| |
| 2019-12-17 Alan Modra <amodra@gmail.com> |
| |
| * doc/as.texi: Remove mention of tic80. |
| |
| 2019-12-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/25274 |
| * config/tc-i386.c (optimize_encoding): Also check R12-R15 |
| registers for "test $imm7, %r64/%r32/%r16 -> test $imm7, %r8" |
| optimization. |
| * testsuite/gas/i386/x86-64-optimize-3.s: Add tests for test |
| with r12. |
| * testsuite/gas/i386/x86-64-optimize-3.d: Updated. |
| * testsuite/gas/i386/x86-64-optimize-3b.d: Likewise. |
| |
| 2019-12-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/gas/i386/align-branch-1.s: New file. |
| * testsuite/gas/i386/align-branch-1a.d: Likewise. |
| * testsuite/gas/i386/align-branch-1b.d: Likewise. |
| * testsuite/gas/i386/align-branch-1c.d: Likewise. |
| * testsuite/gas/i386/align-branch-1d.d: Likewise. |
| * testsuite/gas/i386/align-branch-1e.d: Likewise. |
| * testsuite/gas/i386/align-branch-1f.d: Likewise. |
| * testsuite/gas/i386/align-branch-1g.d: Likewise. |
| * testsuite/gas/i386/align-branch-1h.d: Likewise. |
| * testsuite/gas/i386/align-branch-2.s: Likewise. |
| * testsuite/gas/i386/align-branch-2a.d: Likewise. |
| * testsuite/gas/i386/align-branch-2b.d: Likewise. |
| * testsuite/gas/i386/align-branch-2c.d: Likewise. |
| * testsuite/gas/i386/align-branch-3.d: Likewise. |
| * testsuite/gas/i386/align-branch-3.s: Likewise. |
| * testsuite/gas/i386/align-branch-4.s: Likewise. |
| * testsuite/gas/i386/align-branch-4a.d: Likewise. |
| * testsuite/gas/i386/align-branch-4b.d: Likewise. |
| * testsuite/gas/i386/align-branch-5.d: Likewise. |
| * testsuite/gas/i386/align-branch-5.s: Likewise. |
| * testsuite/gas/i386/align-branch-6.d: Likewise. |
| * testsuite/gas/i386/align-branch-6.s: Likewise. |
| * testsuite/gas/i386/align-branch-7.d: Likewise. |
| * testsuite/gas/i386/align-branch-7.s: Likewise. |
| * testsuite/gas/i386/align-branch-8.d: Likewise. |
| * testsuite/gas/i386/align-branch-8.s: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-1.s: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-1a.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-1b.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-1c.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-1d.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-1e.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-1f.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-1g.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-1h.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-2.s: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-2a.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-2b.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-2c.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-3.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-3.s: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-4.s: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-4a.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-4b.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-5.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-6.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-7.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-7.s: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-8.d: Likewise. |
| * testsuite/gas/i386/x86-64-align-branch-8.s: Likewise. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2019-12-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (OPTION_MBRANCHES_WITH_32B_BOUNDARIES): New. |
| (md_longopts): Add -mbranches-within-32B-boundaries. |
| (md_parse_option): Handle -mbranches-within-32B-boundaries. |
| (md_show_usage): Add -mbranches-within-32B-boundaries. |
| |
| 2019-12-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (_i386_insn): Add has_gotpc_tls_reloc. |
| (tls_get_addr): New. |
| (last_insn): New. |
| (align_branch_power): New. |
| (align_branch_kind): New. |
| (align_branch_bit): New. |
| (align_branch): New. |
| (MAX_FUSED_JCC_PADDING_SIZE): New. |
| (align_branch_prefix_size): New. |
| (BRANCH_PADDING): New. |
| (BRANCH_PREFIX): New. |
| (FUSED_JCC_PADDING): New. |
| (i386_generate_nops): Support BRANCH_PADDING and FUSED_JCC_PADDING. |
| (md_begin): Abort if align_branch_prefix_size < |
| MAX_FUSED_JCC_PADDING_SIZE. |
| (md_assemble): Set last_insn. |
| (maybe_fused_with_jcc_p): New. |
| (add_fused_jcc_padding_frag_p): New. |
| (add_branch_prefix_frag_p): New. |
| (add_branch_padding_frag_p): New. |
| (output_insn): Generate a BRANCH_PADDING, FUSED_JCC_PADDING or |
| BRANCH_PREFIX frag and terminate each frag to align branches. |
| (output_disp): Set i.has_gotpc_tls_reloc to TRUE for GOTPC and |
| relaxable TLS relocations. |
| (output_imm): Likewise. |
| (i386_next_non_empty_frag): New. |
| (i386_next_jcc_frag): New. |
| (i386_classify_machine_dependent_frag): New. |
| (i386_branch_padding_size): New. |
| (i386_generic_table_relax_frag): New. |
| (md_estimate_size_before_relax): Handle COND_JUMP_PADDING, |
| FUSED_JCC_PADDING and COND_JUMP_PREFIX frags. |
| (md_convert_frag): Handle BRANCH_PADDING, BRANCH_PREFIX and |
| FUSED_JCC_PADDING frags. |
| (OPTION_MALIGN_BRANCH_BOUNDARY): New. |
| (OPTION_MALIGN_BRANCH_PREFIX_SIZE): New. |
| (OPTION_MALIGN_BRANCH): New. |
| (md_longopts): Add -malign-branch-boundary=, |
| -malign-branch-prefix-size= and -malign-branch=. |
| (md_parse_option): Handle -malign-branch-boundary=, |
| -malign-branch-prefix-size= and -malign-branch=. |
| (md_show_usage): Display -malign-branch-boundary=, |
| -malign-branch-prefix-size= and -malign-branch=. |
| (i386_target_format): Set tls_get_addr. |
| (i386_cons_align): New. |
| * config/tc-i386.h (i386_cons_align): New. |
| (md_cons_align): New. |
| (i386_generic_table_relax_frag): New. |
| (md_generic_table_relax_frag): New. |
| (i386_tc_frag_data): Add u, padding_address, length, |
| max_prefix_length, prefix_length, default_prefix, cmp_size, |
| classified and branch_type. |
| (TC_FRAG_INIT): Initialize u, padding_address, length, |
| max_prefix_length, prefix_length, default_prefix, cmp_size, |
| classified and branch_type. |
| * doc/c-i386.texi: Document -malign-branch-boundary=, |
| -malign-branch= and -malign-branch-prefix-size=. |
| |
| 2019-12-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * write.c (md_generic_table_relax_frag): New. Defined to |
| relax_frag if not defined. |
| (relax_segment): Call md_generic_table_relax_frag instead of |
| relax_frag. |
| |
| 2019-12-12 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-aarch64.c (get_aarch64_insn): Avoid signed overflow. |
| * config/tc-metag.c (parse_dalu): Likewise. |
| * config/tc-tic4x.c (md_pcrel_from): Likewise. |
| * config/tc-tic6x.c (tic6x_output_unwinding): Likewise. |
| * config/tc-csky.c (parse_fexp): Use an unsigned char temp buffer. |
| Don't use register keyword. Avoid signed overflow and remove now |
| unneccesary char masks. Formatting. |
| * config/tc-ia64.c (operand_match): Don't use shifts to sign extend. |
| * config/tc-mep.c (mep_apply_fix): Likewise. |
| * config/tc-pru.c (md_apply_fix): Likewise. |
| * config/tc-riscv.c (load_const): Likewise. |
| * config/tc-nios2.c (md_apply_fix): Likewise. Don't potentially |
| truncate fixup before right shift. Tidy BFD_RELOC_NIOS2_HIADJ16 |
| calculation. |
| |
| 2019-12-12 Alan Modra <amodra@gmail.com> |
| |
| * config/obj-evax.c (crc32, encode_32, encode_16, decode_16): |
| Remove unnecessary prototypes. |
| (number_of_codings): Delete, use ARRAY_SIZE instead throughout. |
| (codings, decodings): Make arrays of unsigned char. |
| (crc32): Use unsigned variables. Delete unnecessary mask. |
| (encode_32, encode_16): Return unsigned char*, and make static |
| buffer an unsigned char array. |
| (decode_16): Make arg an unsigned char*. Remove useless casts. |
| (shorten_identifier): Use unsigned char crc_chars. |
| (is_truncated_identifier): Make ptr an unsigned char*. |
| |
| 2019-12-11 Wilco Dijkstra <wdijkstr@arm.com> |
| |
| * config/tc-arm.c (warn_on_restrict_it): Add new variable. |
| (it_fsm_post_encode): Check warn_on_restrict_it. |
| (arm_option_table): Add -mwarn-restrict-it/-mno-warn-restrict-it. |
| * testsuite/gas/arm/armv8-2-fp16-scalar-bad.d: Add -mwarn-restrict-it. |
| * testsuite/gas/arm/armv8-2-fp16-scalar-bad-ext.d: Likewise. |
| * testsuite/gas/arm/armv8-a-bad.d: Likewise. |
| * testsuite/gas/arm/armv8-a-it-bad.d: Likewise. |
| * testsuite/gas/arm/armv8-r-bad.d: Likewise. |
| * testsuite/gas/arm/armv8-r-it-bad.d: Likewise. |
| * testsuite/gas/arm/sp-pc-validations-bad-t-v8a.d: Likewise. |
| * testsuite/gas/arm/udf.d: Likewise. |
| |
| 2018-12-11 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (md_assemble): Extend SSE check conditional. |
| * testsuite/gas/i386/sse-check.s: Add SSE4a and SHA tests. |
| Extend GFNI tests. |
| * testsuite/gas/i386/sse-check.d: Adjust expectations. |
| * testsuite/gas/i386/sse-check-error.l, |
| testsuite/gas/i386/x86-64-sse-check-error.l: Likewise. |
| * testsuite/gas/i386/sse-check-warn.e: Likewise. |
| |
| 2019-12-10 Vladimir Murzin <vladimir.murzin@arm.com> |
| |
| * config/tc-arm.c (s_arm_arch): Set selected_ctx_ext_table. |
| * testsuite/gas/arm/mve-arch-ext.s: New. |
| * testsuite/gas/arm/mve-arch-ext.d: New. |
| |
| 2019-12-09 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386-intel.c (O_oword_ptr): Move. |
| (O_xmmword_ptr): Alias to O_oword_ptr. |
| (O_fword_ptr, O_tbyte_ptr, O_ymmword_ptr, O_zmmword_ptr): Adjust |
| expansion. |
| (i386_intel_simplify, i386_intel_operand): Fold O_oword_ptr and |
| O_xmmword_ptr cases, leaving comments. |
| |
| 2019-12-09 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386-intel.c (O_mmword_ptr): Define. |
| (i386_types): Add mmword entry. |
| (i386_intel_simplify, i386_intel_operand): Add comment. |
| * testsuite/gas/i386/intel-expr.s: Also test mmword and zmmword. |
| * testsuite/gas/i386/intelok.s: Also test "mmword ptr". |
| * testsuite/gas/i386/intel-expr.d, testsuite/gas/i386/intelok.d, |
| testsuite/gas/i386/intelok.e: Adjust expectations. |
| |
| 2019-12-09 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386-intel.c (i386_intel_operand): Set "byte" |
| attribute suffix instead of suffix for floating point insns when |
| handling O_near_ptr / O_far_ptr. |
| * testsuite/gas/i386/intelbad.s: Add FPU tests. |
| * testsuite/gas/i386/intelbad.l: Adjust expectations. |
| |
| 2019-12-09 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386-intel.c (i386_intel_operand): Set "byte" |
| attribute suffix instead of suffix uniformly for insns not |
| possibly accepting "tbyte ptr" explicitly. |
| |
| 2019-12-09 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386-intel.c (i386_intel_operand): Don't set suffix |
| for floating point insns when handling O_fword_ptr. |
| |
| 2019-12-09 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386-intel.c (i386_intel_operand): Don't special |
| case LDS et al when handling O_word_ptr. |
| |
| 2019-12-08 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/aarch64/bfloat16.d: Match 32-bit and 64-bit output. |
| * testsuite/gas/aarch64/dgh.d: Likewise. |
| * testsuite/gas/aarch64/f32mm.d: Likewise. |
| * testsuite/gas/aarch64/f64mm.d: Likewise. |
| * testsuite/gas/aarch64/i8mm.d: Likewise. |
| * testsuite/gas/aarch64/pac_ab_key.d: Likewise. |
| * testsuite/gas/aarch64/pac_negate_ra_state.d: Likewise. |
| * testsuite/gas/aarch64/reloc-prel_g0.d: Likewise. |
| * testsuite/gas/aarch64/reloc-prel_g0_nc.d: Likewise. |
| * testsuite/gas/aarch64/reloc-prel_g1.d: Likewise. |
| * testsuite/gas/aarch64/sve-bfloat-movprfx.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx-mm.d: Likewise. |
| * testsuite/gas/aarch64/sve2.d: Likewise. |
| |
| 2019-12-06 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * dw2gencfi.c (cfi_pseudo_table): Add cfi_negate_ra_state. |
| * testsuite/gas/aarch64/pac_negate_ra_state.s: New file. |
| * testsuite/gas/aarch64/pac_negate_ra_state.d: Likewise. |
| |
| 2019-12-05 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-aarch64.c (aarch64_features): Drop redundant AES and |
| SHA2 flags from "crypto" entry. |
| |
| 2019-12-05 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-aarch64.c (aarch64_features): Make SHA2 a prereq of |
| SHA3. |
| * testsuite/gas/aarch64/crypto.s |
| * testsuite/gas/aarch64/crypto-directive.d: Refer to crypto.d |
| for actual output. |
| * testsuite/gas/aarch64/illegal-crypto-nofp.l: Relax |
| expectations. |
| * testsuite/gas/aarch64/crypto-directive2.d, |
| testsuite/gas/aarch64/crypto-directive3.d: New. |
| |
| 2019-12-04 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386-intel.c (i386_intel_operand): Handle LFS et al |
| as well as LGDT at al when processing O_tbyte_ptr. |
| * testsuite/gas/i386/intelbad.s: Add LDS et al cases. |
| * testsuite/gas/i386/x86-64-intel64.s, |
| * testsuite/gas/i386/x86-64-opcode.s: Add LFS et al cases. |
| * testsuite/gas/i386/ilp32/x86-64-intel64.d: Add -mintel64 |
| command line option and fold expectations with parent dir test. |
| * testsuite/gas/i386/x86-64-intel64.d: Add -mintel64 command |
| line option and adjust expectations. |
| * testsuite/gas/i386/intelbad.l, |
| testsuite/gas/i386/x86-64-opcode.d: Adjust expectations. |
| |
| 2019-12-04 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386-intel.c (i386_intel_operand): Also handle DWORD |
| with 64-bit mode branches. |
| * testsuite/gas/i386/x86-64-jump.s: Extend Intel syntax branch |
| operand coverage. |
| * testsuite/gas/i386/x86-64-jump.d: Adjust expectations. |
| |
| 2019-12-04 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (output_insn): Don't consider Cpu* settings |
| when setting GNU_PROPERTY_X86_FEATURE_2_MMX. |
| |
| 2019-12-04 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/movdir.s: Add Intel syntax case with |
| operand size specifier. |
| * testsuite/gas/i386/x86-64-movdir.s: Add Intel syntax cases |
| with operand size specifier and wit 32-bit operands. |
| * testsuite/gas/i386/movdir-intel.d, |
| testsuite/gas/i386/movdir.d, |
| testsuite/gas/i386/x86-64-movdir-intel.d, |
| testsuite/gas/i386/x86-64-movdir.d: Adjust expectations. |
| |
| 2019-12-04 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (process_suffix): Arrange for insns with a |
| single non-GPR register operand to not have its suffix guessed |
| from GPR operands. Extend DefaultSize handling to cover PUSH/POP |
| of segment registers. |
| * testsuite/gas/i386/general.s: Add PUSH/POP sreg to .code16gcc |
| set of insns. |
| * testsuite/gas/i386/general.l: Adjust expectations. |
| |
| 2019-12-04 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (process_suffix): Exclude SYSRET alongside |
| FLDENV et al. |
| * testsuite/gas/i386/general.s: Expand .code16gcc set of insns. |
| * testsuite/gas/i386/general.l: Adjust expectations. |
| |
| 2019-11-22 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * as.c (flag_dwarf_cie_version): Change initial value to -1, and |
| update comment. |
| * config/tc-riscv.c (riscv_after_parse_args): Set |
| flag_dwarf_cie_version if it has not already been set. |
| * dwarf2dbg.c (dwarf2_init): Initialise flag_dwarf_cie_version if |
| needed. |
| * testsuite/gas/riscv/default-cie-version.d: New file. |
| * testsuite/gas/riscv/default-cie-version.s: New file. |
| |
| 2019-11-22 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * dw2gencfi.c (output_cie): Error on return column overflow. |
| * testsuite/gas/riscv/cie-rtn-col-1.d: New file. |
| * testsuite/gas/riscv/cie-rtn-col-3.d: New file. |
| * testsuite/gas/riscv/cie-rtn-col.s: New file. |
| |
| 2019-11-22 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-riscv.c (tc_riscv_regname_to_dw2regnum): Lookup CSR |
| names too. |
| * testsuite/gas/riscv/csr-dw-regnums.d: New file. |
| * testsuite/gas/riscv/csr-dw-regnums.s: New file. |
| |
| 2019-11-22 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * config/tc-riscv.c (struct regname): Delete. |
| (hash_reg_names): Handle value as 'void *'. |
| |
| 2019-11-25 Andrew Pinski <apinski@marvell.com> |
| |
| * config/tc-aarch64.c (md_begin): Use correct |
| hash table for uppercase version of hint. |
| * testsuite/gas/aarch64/system-2.s: Extend psb case to uppercase. |
| * testsuite/gas/aarch64/system-2.d: Update. |
| |
| 2019-11-25 Christian Eggers <ceggers@gmx.de> |
| |
| * as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF. |
| * dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for |
| .debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str |
| and .debug_ranges sections. |
| * write.c (maybe_generate_build_notes): Set section flag |
| SEC_OCTETS for .gnu.build.attributes section. |
| * frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if |
| SEC_OCTETS is set. |
| * symbols.c (resolve_symbol_value): Likewise. |
| |
| 2019-11-25 Christian Eggers <ceggers@gmx.de> |
| |
| * dwarf2dbg.c (out_set_addr): Revert 2019-03-13 change. |
| (out_debug_line, out_debug_aranges, out_debug_info): Likewise. |
| * symbols.h (symbol_set_value_now_octets, symbol_octets_p): Remove. |
| * symbols.c (struct symbol_flags): Remove member sy_octets. |
| (symbol_temp_new_now_octets): Don't set symbol_flags::sy_octets. |
| (resolve_symbol_value): Revert: Return octets instead of bytes if |
| sy_octets is set. |
| (symbol_set_value_now_octets): Remove. |
| (symbol_octets_p): Remove. |
| |
| 2019-11-22 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * config/tc-arm.c (arm_ext_crc): New. |
| (crc_ext_armv8): Remove. |
| (insns): Rename crc_ext_armv8 to arm_ext_crc. |
| (arm_cpus): Replace CRC_EXT_ARMV8 with ARM_EXT2_CRC. |
| (armv8a_ext_table, armv8r_ext_table, |
| arm_option_extension_value_table): Redefine the crc |
| extension in terms of ARM_EXT2_CRC. |
| * gas/testsuite/gas/arm/crc-ext.s: New. |
| * gas/testsuite/gas/arm/crc-ext.d: New. |
| |
| 2019-11-20 Alan Modra <amodra@gmail.com> |
| |
| PR 24944 |
| * atof-generic.c (atof_generic): Increase decimal guard digits. |
| * testsuite/gas/i386/fp.s: Add more tests. |
| * testsuite/gas/i386/fp.d: Update. |
| |
| 2019-11-18 Andrew Burgess <andrew.burgess@embecosm.com> |
| |
| * as.c (parse_args): Parse --gdwarf-cie-version option. |
| (flag_dwarf_cie_version): New variable. |
| * as.h (flag_dwarf_cie_version): Declare. |
| * dw2gencfi.c (output_cie): Switch from DW_CIE_VERSION to |
| flag_dwarf_cie_version. |
| * doc/as.texi (Overview): Document --gdwarf-cie-version. |
| * NEWS: Likewise. |
| * testsuite/gas/cfi/cfi.exp: Add new tests. |
| * testsuite/gas/cfi/cie-version-0.d: New file. |
| * testsuite/gas/cfi/cie-version-1.d: New file. |
| * testsuite/gas/cfi/cie-version-2.d: New file. |
| * testsuite/gas/cfi/cie-version-3.d: New file. |
| * testsuite/gas/cfi/cie-version-4.d: New file. |
| * testsuite/gas/cfi/cie-version.s: New file. |
| |
| 2019-11-14 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (operand_size_match, md_assemble, |
| parse_insn, match_template, process_suffix, output_jump, |
| output_insn, i386_displacement): Adjust jump* field use/ |
| handling. |
| * config/tc-i386-intel.c (i386_intel_operand): Likewise. |
| |
| 2019-11-14 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (struct _i386_insn): Add jumpabsolute field. |
| (operand_type_match): Drop jumpabsolute use. |
| (type_names): Remove OPERAND_TYPE_JUMPABSOLUTE entry. |
| (process_suffix, i386_displacement): Adjust jumpabsolute uses. |
| (match_template, i386_att_operand): Adjust jumpabsolute |
| handling. |
| * config/tc-i386-intel.c (i386_intel_operand): Likewise. |
| |
| 2019-11-14 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (operand_size_match): Adjust anysize use. |
| |
| 2019-11-14 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/intel-cmps32.d, |
| testsuite/gas/i386/intel-cmps64.d: Correct regexp closing |
| parentheses placement. |
| |
| 2019-11-14 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/intel-cmps.s, |
| testsuite/gas/i386/intel-movs.s: Extend. |
| * testsuite/gas/i386/intel-cmps32.d, |
| testsuite/gas/i386/intel-cmps64.d, |
| testsuite/gas/i386/intel-movs32.d, |
| testsuite/gas/i386/intel-movs64.d: Adjust expectations. |
| * testsuite/gas/i386/intel-cmps16.d, |
| testsuite/gas/i386/intel-movs16.d: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2019-11-12 Nelson Chu <nelson.chu@sifive.com> |
| |
| * testsuite/gas/riscv/insn.d: Add the f extension to -march option. |
| |
| 2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * config/tc-arm.c (do_vfp_nsyn_push): Move in order to enable it for |
| both fpu_vfp_ext_v1xd and mve_ext and add call to the aliased vstm |
| instruction for mve_ext. |
| (do_vfp_nsyn_pop): Move in order to enable it for both |
| fpu_vfp_ext_v1xd and mve_ext and add call to the aliased vldm |
| instruction for mve_ext. |
| (do_neon_ldm_stm): Add fpu_vfp_ext_v1 and mve_ext checks. |
| (insns): Enable vldm, vldmia, vldmdb, vstm, vstmia, vstmdb, vpop, |
| vpush, and fldd, fstd, flds, fsts for arm_ext_v6t2 instead |
| of fpu_vfp_ext_v1xd. |
| * testsuite/gas/arm/v8_1m-mve.s: New. |
| * testsuite/gas/arm/v8_1m-mve.d: New. |
| |
| 2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * gas/config/tc-arm.c (do_neon_mvn): Allow mve_ext cmode=0xd. |
| * testsuite/gas/arm/mve-vmov-vmvn-vorr-vbic.s: New test. |
| * testsuite/gas/arm/mve-vmov-vmvn-vorr-vbic.d: Likewise. |
| |
| 2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * config/tc-arm.c (s_arm_fpu): Clear selected_cpu fpu bits. |
| (fpu_any): Remove OBJ_ELF guards. |
| * testsuite/gas/arm/fpu-rst.s: New. |
| * testsuite/gas/arm/fpu-rst.d: New. |
| * testsuite/gas/arm/fpu-rst.l: New. |
| |
| 2019-11-12 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (type_names): Remove OPERAND_TYPE_ESSEG |
| entry. |
| (md_assemble): Adjust isstring field use. Add assertion. |
| (check_string): Mostly re-write. |
| (i386_index_check): Adjust isstring field use and related code. |
| |
| 2019-11-12 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (process_immext): Remove SSE3, SVME, and |
| MWAITX special case logic. |
| (process_suffix): Replace immext field uses by instance ones. |
| * testsuite/gas/i386/arch-13.s, |
| testsuite/gas/i386/x86-64-arch-3.s: Add CLZERO with operand |
| cases. |
| * testsuite/gas/i386/svme.s: Add 16-bit operand cases. |
| * testsuite/gas/i386/x86-64-specific-reg.s: Drop FIXME comments. |
| * testsuite/gas/i386/arch-13.d, |
| testsuite/gas/i386/mwaitx-reg.l, testsuite/gas/i386/svme.d, |
| testsuite/gas/i386/x86-64-arch-3.d, |
| testsuite/gas/i386/x86-64-mwaitx-reg.l, |
| testsuite/gas/i386/x86-64-specific-reg.l: Adjust expectations. |
| |
| 2019-11-12 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (operand_type_set, operand_type_and, |
| operand_type_and_not, operand_type_or, operand_type_xor): Handle |
| "instance" field specially. |
| (operand_size_match, md_assemble, match_template, process_suffix, |
| check_byte_reg, check_long_reg, check_qword_reg, check_word_reg, |
| process_operands, build_modrm_byte): Use "instance" instead of |
| "acc" / "inoutportreg" / "shiftcount" fields. |
| (optimize_imm): Adjust comment. |
| |
| 2019-11-11 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/aarch64/illegal-sve2.s: Add smaxp/sminp cases |
| with mismatched 1st and 3rd operands. |
| * testsuite/gas/aarch64/illegal-sve2.l: Adjust expectations. |
| |
| 2019-11-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/25167 |
| * config/tc-i386.c (match_template): Don't check instruction |
| suffix set from operand. |
| * testsuite/gas/i386/code16.d: New file. |
| * testsuite/gas/i386/code16.s: Likewise. |
| * testsuite/gas/i386/i386.exp: Run code16. |
| |
| 2019-11-08 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_encoding, build_modrm_byte, |
| check_VecOperations, parse_real_register): Use "class" instead |
| of "regmask" and "regbnd" fields. |
| |
| 2019-11-08 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (match_mem_size, operand_size_match, |
| operand_type_register_match, pi, check_VecOperands, match_template, |
| check_byte_reg, check_long_reg, check_qword_reg, process_operands, |
| build_modrm_byte, parse_real_register): Use "class" instead of |
| "regsimd" / "regmmx" fields. |
| |
| 2019-11-08 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (pi, check_byte_reg, build_modrm_byte, |
| parse_real_register): Use "class" instead of "control"/"debug"/ |
| "test" fields. |
| |
| 2019-11-08 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (pi, check_byte_reg, process_operands, |
| build_modrm_byte, i386_att_operand, parse_real_register): Use |
| "class" instead of "sreg" field. |
| * config/tc-i386-intel.c (i386_intel_simplify_register, |
| i386_intel_operand): Likewise. |
| |
| 2019-11-08 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (operand_type_set, operand_type_and, |
| operand_type_and_not, operand_type_or, operand_type_xor): Handle |
| "class" field specially. |
| (anyimm): New. |
| (operand_type_check, operand_size_match, |
| operand_type_register_match, pi, md_assemble, is_short_form, |
| process_suffix, check_byte_reg, check_long_reg, check_qword_reg, |
| check_word_reg, process_operands, build_modrm_byte): Use "class" |
| instead of "reg" field. |
| (optimize_imm): Likewise. Reduce redundancy. Adjust calculation |
| of "allowed". |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * testsuite/gas/aarch64/dgh.s: New test. |
| * testsuite/gas/aarch64/dgh.d: New test. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * config/tc-arm.c (arm_ext_i8mm): New feature set. |
| (do_vusdot): New. |
| (do_vsudot): New. |
| (do_vsmmla): New. |
| (do_vummla): New. |
| (insns): Add vsmmla, vummla, vusmmla, vusdot, vsudot mnemonics. |
| (armv86a_ext_table): Add i8mm extension. |
| (arm_extensions): Move bf16 extension to context sensitive table. |
| (armv82a_ext_table, armv84a_ext_table, armv85a_ext_table): |
| Move bf16 extension to context sensitive table. |
| (armv86a_ext_table): Add i8mm extension. |
| * doc/c-arm.texi: Document i8mm extension. |
| * testsuite/gas/arm/i8mm.s: New test. |
| * testsuite/gas/arm/i8mm.d: New test. |
| * testsuite/gas/arm/bfloat17-cmdline-bad-3.d: Update test. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * config/tc-aarch64.c: Add new arch fetures to suppport the mm extension. |
| (parse_operands): Add new operand. |
| * testsuite/gas/aarch64/i8mm.s: New test. |
| * testsuite/gas/aarch64/i8mm.d: New test. |
| * testsuite/gas/aarch64/f32mm.s: New test. |
| * testsuite/gas/aarch64/f32mm.d: New test. |
| * testsuite/gas/aarch64/f64mm.s: New test. |
| * testsuite/gas/aarch64/f64mm.d: New test. |
| * testsuite/gas/aarch64/sve-movprfx-mm.s: New test. |
| * testsuite/gas/aarch64/sve-movprfx-mm.d: New test. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| 2019-11-07 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * config/tc-aarch64.c (md_atof): Add encoding for the bfloat16 format. |
| * testsuite/gas/aarch64/bfloat16-directive-le.d: New test. |
| * testsuite/gas/aarch64/bfloat16-directive-be.d: New test. |
| * testsuite/gas/aarch64/bfloat16-directive.s: New test. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| 2019-11-07 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * config/tc-arm.c (md_atof): Add encoding for bfloat16 |
| * testsuite/gas/arm/bfloat16-directive-le.d: New test. |
| * testsuite/gas/arm/bfloat16-directive-be.d: New test. |
| * testsuite/gas/arm/bfloat16-directive.s: New test. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| 2019-11-07 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * as.h (atof_ieee_detail): Add prototype for atof_ieee_detail function. |
| (atof_ieee): Move some code into the atof_ieee_detail function. |
| (atof_ieee_detail): Add function that provides a higher level of |
| control over generating IEEE-like numbers. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * config/tc-arm.c (arm_archs): Add armv8.6-a option. |
| (cpu_arch_ver): Add TAG_CPU_ARCH_V8 tag for Armv8.6-a. |
| * doc/c-arm.texi (-march): New armv8.6-a arch. |
| * config/tc-arm.c (arm_ext_bf16): New feature set. |
| (enum neon_el_type): Add NT_bfloat value. |
| (B_MNEM_vfmat, B_MNEM_vfmab): New bfloat16 encoder |
| helpers. |
| (BAD_BF16): New message. |
| (parse_neon_type): Add bf16 type specifier. |
| (enum neon_type_mask): Add N_BF16 type. |
| (type_chk_of_el_type): Account for NT_bfloat. |
| (el_type_of_type_chk): Account for N_BF16. |
| (neon_three_args): Split out from neon_three_same. |
| (neon_three_same): Part split out into neon_three_args. |
| (CVT_FLAVOUR_VAR): Add bf16_f32 cvt flavour. |
| (do_neon_cvt_1): Account for vcvt.bf16.f32. |
| (do_bfloat_vmla): New. |
| (do_mve_vfma): New function to deal with the mnemonic clash between the BF16 |
| vfmat and the MVE vfma in a VPT block with a 't'rue condition. |
| (do_neon_cvttb_1): Account for vcvt{t,b}.bf16.f32. |
| (do_vdot): New |
| (do_vmmla): New |
| (insns): Add vdot and vmmla mnemonics. |
| (arm_extensions): Add "bf16" extension. |
| * doc/c-arm.texi: Document "bf16" extension. |
| * testsuite/gas/arm/attr-march-armv8_6-a.d: New test. |
| * testsuite/gas/arm/bfloat16-bad.d: New test. |
| * testsuite/gas/arm/bfloat16-bad.l: New test. |
| * testsuite/gas/arm/bfloat16-bad.s: New test. |
| * testsuite/gas/arm/bfloat16-cmdline-bad-2.d: New test. |
| * testsuite/gas/arm/bfloat16-cmdline-bad-3.d: New test. |
| * testsuite/gas/arm/bfloat16-cmdline-bad.d: New test. |
| * testsuite/gas/arm/bfloat16-neon.s: New test. |
| * testsuite/gas/arm/bfloat16-non-neon.s: New test. |
| * testsuite/gas/arm/bfloat16-thumb-bad.d: New test. |
| * testsuite/gas/arm/bfloat16-thumb-bad.l: New test. |
| * testsuite/gas/arm/bfloat16-thumb.d: New test. |
| * testsuite/gas/arm/bfloat16-vfp.d: New test. |
| * testsuite/gas/arm/bfloat16.d: New test. |
| * testsuite/gas/arm/bfloat16.s: New test. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * config/tc-aarch64.c (vectype_to_qualifier): Special case the |
| S_2H operand qualifier. |
| * doc/c-aarch64.texi: Document bf16 extension. |
| * testsuite/gas/aarch64/bfloat16.d: New test. |
| * testsuite/gas/aarch64/bfloat16.s: New test. |
| * testsuite/gas/aarch64/illegal-bfloat16.d: New test. |
| * testsuite/gas/aarch64/illegal-bfloat16.l: New test. |
| * testsuite/gas/aarch64/illegal-bfloat16.s: New test. |
| * testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test. |
| * testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test. |
| |
| 2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com> |
| 2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * config/tc-aarch64.c (armv8.6-a): New arch. |
| * doc/c-aarch64.texi (armv8.6-a): Document new arch. |
| |
| 2019-11-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .rdpru and .mcommit entries. |
| * doc/c-i386.texi: Mention rdpru and mcommit. |
| * testsuite/gas/i386/arch-13.s, |
| testsuite/gas/i386/x86-64-arch-3.s: Add mcommit and rdpru cases. |
| * testsuite/gas/i386/arch-13.d, |
| testsuite/gas/i386/x86-64-arch-3.d: Extend -march=. Adjust |
| expectations. |
| * testsuite/gas/i386/arch-13-znver1.d: Extend -march=. Redirect |
| expectations to arch-13.d. |
| * testsuite/gas/i386/arch-13-znver2.d: Redirect expectations to |
| arch-13.d. |
| testsuite/gas/i386/x86-64-arch-3-znver1.d: Extend -march=. |
| |
| 2019-11-07 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/x86-64-arch-3.s: Add monitorx/mwaitx cases |
| with canonical operand sizes. |
| * testsuite/gas/i386/x86-64-sse3.s: Add monitor/mwait cases with |
| canonical operand sizes. |
| * testsuite/gas/i386/x86-64-arch-3-znver1.d, |
| testsuite/gas/i386/x86-64-arch-3-znver2.d: Redirect expectations |
| to x86-64-arch-3.d. |
| * testsuite/gas/i386/ilp32/x86-64-sse-noavx.d: Redirect |
| expectations to parent dir's x86-64-sse-noavx.d. |
| * testsuite/gas/i386/ilp32/x86-64-sse3.d: Redirect expectations |
| to to parent dir's x86-64-sse3.d. |
| * testsuite/gas/i386/x86-64-arch-3.d, |
| testsuite/gas/i386/x86-64-mwaitx-bdver4.d, |
| testsuite/gas/i386/x86-64-sse-noavx.d, |
| testsuite/gas/i386/x86-64-sse3.d, |
| testsuite/gas/i386/x86-64-suffix.d: Adjust expectations. |
| |
| 2019-11-04 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (process_operands): Handle ShortForm insns |
| later, splitting out their segment register sub-form. |
| |
| 2019-10-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/gas/i386/general.s: Add .code16gcc fldenv tests. |
| * testsuite/gas/i386/general.l: Updated. |
| |
| 2019-10-31 Mihail Ionescu <mihail.ionescu@arm.com> |
| |
| * config/tc-arm.c (selected_ctx_ext_table) New static variable. |
| (arm_parse_arch): Set context sensitive extension table based on the |
| chosen base architecture. |
| (s_arm_arch_extension): Change to lookup extensions in the new context |
| sensitive tables. |
| * gas/testsuite/gas/arm/mve-ext.s: New. |
| * gas/testsuite/gas/arm/mve-ext.d: New. |
| * gas/testsuite/gas/arm/mvefp-ext.s: New. |
| * gas/testsuite/gas/arm/mvefp-ext.d: New. |
| |
| 2019-10-30 Delia Burduv <Delia.Burduv@arm.com> |
| |
| * config/tc-aarch64.c (parse_address_main): Accept the omission of |
| the immediate argument for ldraa and ldrab as a shorthand for the |
| immediate being 0. |
| * testsuite/gas/aarch64/ldraa-ldrab-no-offset.d: New test. |
| * testsuite/gas/aarch64/ldraa-ldrab-no-offset.s: New test. |
| * testsuite/gas/aarch64/illegal-ldraa.s: Modified to accept the |
| writeback form with no offset. |
| * testsuite/gas/aarch64/illegal-ldraa.s: Removed missing offset |
| error. |
| |
| 2019-10-30 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/noreg16.d, testsuite/gas/i386/noreg16.s, |
| testsuite/gas/i386/noreg32.d, testsuite/gas/i386/noreg32.s, |
| testsuite/gas/i386/noreg64.d, testsuite/gas/i386/noreg64.s: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2019-10-30 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_encoding): Adjust opcodes compared |
| against. Adjust replacement opcode and clear .w. |
| |
| 2019-10-29 Alan Modra <amodra@gmail.com> |
| |
| PR 25125 |
| * dw2gencfi.c (output_cfi_insn): Don't allow DW_CFA_advance_loc4 |
| to be placed in a different frag to the rs_cfa. |
| |
| 2019-10-26 John David Anglin <danglin@gcc.gnu.org> |
| |
| PR gas/25121 |
| * config/tc-hppa.c (tc_gen_reloc): Cast some enums to int. |
| (md_assemble): Likewise. |
| |
| 2019-10-26 Alan Modra <amodra@gmail.com> |
| |
| PR 25125 |
| * dw2gencfi.c (output_cfi_insn): Don't output DW_CFA_advance_loc+0. |
| * ehopt.c (eh_frame_estimate_size_before_relax): Return -1 for |
| an advance_loc of zero. |
| (eh_frame_relax_frag): Translate fr_subtype of 7 to size -1. |
| (eh_frame_convert_frag): Handle fr_subtype of 7. Abort on |
| unexpected fr_subtype. |
| |
| 2019-10-25 Alan Modra <amodra@gmail.com> |
| |
| PR gas/25125 |
| PR gas/12049 |
| * write.c (relax_frag): Correct calculation of delta for |
| positive branches where "stretch" would make the branch |
| negative. Return zero immediately in that case. Correct |
| TC_PCREL_ADJUST comment. |
| |
| 2019-10-16 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-xtensa.c (xg_order_trampoline_chain_entry): Don't |
| call S_GET_VALUE multiple times for a symbol. Rearrange code |
| so it is obvious what is the primary sort key. |
| (xg_order_trampoline_chain): Similarly. |
| |
| 2019-10-15 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-nds32.c (nds32_set_section_relocs): Use relocs and n |
| parameters rather than equivalent sec->orelocation and |
| sec->reloc_count. Don't sort for n <= 1. Tidy. |
| |
| 2019-10-09 Nick Clifton <nickc@redhat.com> |
| |
| PR 25041 |
| * testsuite/gas/avr/pr25041.s: New test. |
| * testsuite/gas/avr/pr25041.d: New test driver. |
| |
| 2019-10-07 Jozef Lawrynowicz <jozef.l@mittosystems.com> |
| |
| * config/tc-msp430.c (md_parse_option): Set lower_data_region_only |
| to FALSE if the data region is set to "upper", "either" or "none". |
| (msp430_object_attribute): New. |
| (md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute. |
| (msp430_md_end): Replace hard-coded attribute values with enums. |
| Handle data region object attribute. |
| * doc/as.texi: Document MSP430 Data Region object attribute. |
| * doc/c-msp430.texi: Document the .mspabi_attribute directive. |
| * testsuite/gas/msp430/attr-430-small-bad.d: New test. |
| * testsuite/gas/msp430/attr-430-small-bad.l: New test. |
| * testsuite/gas/msp430/attr-430-small-good.d: New test. |
| * testsuite/gas/msp430/attr-430-small.s: New test. |
| * testsuite/gas/msp430/attr-430x-large-any-bad.d: New test. |
| * testsuite/gas/msp430/attr-430x-large-any-bad.l: New test. |
| * testsuite/gas/msp430/attr-430x-large-any-good.d: New test. |
| * testsuite/gas/msp430/attr-430x-large-any.s: New test. |
| * testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test. |
| * testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test. |
| * testsuite/gas/msp430/attr-430x-large-lower-good.d: New test. |
| * testsuite/gas/msp430/attr-430x-large-lower.s: New test. |
| * testsuite/gas/msp430/msp430.exp: Run new tests. |
| |
| 2019-10-07 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (check_string): Make reported operand number |
| depend on Intel syntax. |
| * testsuite/gas/i386/intel-cmps.s, |
| testsuite/gas/i386/intel-cmps32.d, |
| testsuite/gas/i386/intel-cmps64.d: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| * testsuite/gas/i386/intel-movs.s: Extend. |
| * testsuite/gas/i386/intel-movs32.d, |
| testsuite/gas/i386/intel-movs64.d: Adjust expectations. |
| * testsuite/gas/i386/string-bad.l: Tighten expectations. |
| |
| 2019-09-24 Tamar Christina <tamar.christina@arm.com> |
| |
| PR gas/24991 |
| * config/tc-arm.c (out_of_range_p): New. |
| (md_apply_fix): Use it in BFD_RELOC_THUMB_PCREL_BRANCH9, |
| BFD_RELOC_THUMB_PCREL_BRANCH12, BFD_RELOC_THUMB_PCREL_BRANCH20, |
| BFD_RELOC_THUMB_PCREL_BRANCH23, BFD_RELOC_THUMB_PCREL_BRANCH25 |
| * testsuite/gas/arm/pr24991.d: New test. |
| * testsuite/gas/arm/pr24991.l: New test. |
| * testsuite/gas/arm/pr24991.s: New test. |
| |
| 2019-09-23 Alan Modra <amodra@gmail.com> |
| |
| * config/obj-ecoff.c: Include ecoff-bfd.h. |
| * config/obj-elf.c: Likewise. |
| |
| 2019-09-23 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-arm.c: Include cpu-arm.h. |
| |
| 2019-09-21 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-i386.c (md_parse_option): Fix warning on vexwig assignment. |
| |
| 2019-09-20 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-tic6x.c (tc_gen_reloc): Correct common symbol check. |
| |
| 2018-09-20 Jan Beulich <jbeulich@suse.com> |
| |
| PR gas/25012 |
| * config/tc-i386.c (process_operands): Adjust handling of |
| PUSH/POP of segment registers. |
| * testsuite/gas/i386/x86-64-opcode.s: Add PUSHq/POPq case with |
| %fs/%gs operands. Add PUSHF/POPF case without suffix. |
| * testsuite/gas/i386/x86-64-opcode.d: Adjust expectations. |
| |
| 2019-09-19 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * NEWS: Add SVE2 and TME entries. |
| |
| 2019-09-18 Alan Modra <amodra@gmail.com> |
| |
| * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, |
| * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, |
| * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, |
| * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, |
| * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, |
| * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, |
| * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, |
| * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, |
| * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, |
| * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, |
| * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, |
| * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, |
| * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, |
| * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, |
| * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, |
| * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, |
| * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, |
| * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, |
| * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, |
| * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, |
| * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, |
| * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, |
| * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for |
| bfd section macro and function changes. |
| * write.c (compress_debug): Use bfd_rename_section. |
| |
| 2019-09-18 Alan Modra <amodra@gmail.com> |
| |
| * symbols.c (S_IS_LOCAL): Update bfd_get_section to |
| bfd_asymbol_section. |
| |
| 2019-09-18 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * Makefile.in: Re-generate. |
| * configure: Re-generate. |
| * doc/Makefile.in: Re-generate. |
| |
| 2019-09-17 Maxim Blinov <maxim.blinov@embecosm.com> |
| |
| * config/tc-riscv.c (riscv_multi_subset_supports): Handle |
| insn_class enum rather than subset char string. |
| (riscv_ip): Update call to riscv_multi_subset_supports. |
| |
| 2019-09-16 Phil Blundell <pb@pbcl.net> |
| |
| * Makefile.in, configure, doc/Makefile.in: Regenerated. |
| |
| 2019-09-10 Nick Clifton <nickc@redhat.com> |
| |
| PR 24907 |
| * testsuite/gas/arm/pr24907.s: New test. |
| * testsuite/gas/arm/pr24907.d: Expected disassembly. |
| |
| 2019-09-09 Phil Blundell <pb@pbcl.net> |
| |
| binutils 2.33 branch created. |
| |
| 2019-09-05 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_elf_suffix): Display the relocation |
| operator on GOT reloc warnings/errors. |
| |
| 2019-08-27 Srinath Parvathaneni <srinath.parvathaneni@arm.com> |
| |
| * config/tc-arm.c (parse_neon_mov): Add check to accept vector |
| register to both the arguments in VMOV instruction. |
| * testsuite/gas/arm/mve-vmov-1.d: Modify. |
| * testsuite/gas/arm/mve-vmov-1.s: Likewise. |
| * testsuite/gas/arm/mve-vorr.d: Likewise. |
| |
| 2019-08-23 Nick Clifton <nickc@redhat.com> |
| |
| * po/sv.po: Updated Swedish translation. |
| |
| 2019-08-22 Dennis Zhang <dennis.zhang@arm.com> |
| |
| * config/tc-arm.c: New entries for Cortex-M35P, Cortex-A77, |
| and Cortex-A76AE. |
| * doc/c-arm.texi: Document new processors. |
| * testsuite/gas/arm/cpu-cortex-a76ae.d: New test. |
| * testsuite/gas/arm/cpu-cortex-a77.d: New test. |
| * testsuite/gas/arm/cpu-cortex-m35p.d: New test. |
| |
| 2019-08-22 Bosco GarcÃa <jbgg.gnu@gmail.com> |
| Nick Clifton <nickc@redhat.com> |
| |
| * atof-generic.c (atof_generic): Do not ignore leading zeros if |
| they appear after a decimal point. |
| * testsuite/gas/all/float.s: Extend test to include a number with |
| a leading decimal point followed by several zeroes. |
| * testsuite/gas/i386/fp.s: Likewise. |
| * testsuite/gas/i386/fp.d: Update expected output. |
| |
| 2019-08-22 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * config/tc-aarch64.c: Add float16 directive and add "Hh" to |
| acceptable float characters. |
| * doc/c-aarch64.texi: Documentation for float16 directive. |
| * testsuite/gas/aarch64/float16-be.d: New test. |
| * testsuite/gas/aarch64/float16-le.d: New test. |
| * testsuite/gas/aarch64/float16.s: New test. |
| * NEWS: Add NEWS entry. |
| |
| 2019-08-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * testsuite/gas/aarch64/sysreg-4.d: Update expected disassembly for |
| tfsre0_el1, tfsr_el1, tfsr_el2, tfsr_el3, tfsr_el12 system registers. |
| |
| 2019-08-20 Dennis Zhang <dennis.zhang@arm.com> |
| |
| * NEWS: Mention the Arm and AArch64 new processors. |
| * config/tc-aarch64.c: New entries for Cortex-A34, Cortex-A65, |
| Cortex-A77, cortex-A65AE, and Cortex-A76AE. |
| * doc/c-aarch64.texi: Document new CPUs. |
| * testsuite/gas/aarch64/cpu-cortex-a34.d: New test. |
| * testsuite/gas/aarch64/cpu-cortex-a65.d: New test. |
| * testsuite/gas/aarch64/cpu-cortex-a65ae.d: New test. |
| * testsuite/gas/aarch64/cpu-cortex-a76ae.d: New test. |
| * testsuite/gas/aarch64/cpu-cortex-a77.d: New test. |
| * testsuite/gas/aarch64/nop-asm.s: New test. |
| |
| 2019-08-19 Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * config/tc-mips.c (fix_bad_misaligned_address): New function. |
| (fix_validate_branch): Call fix_bad_misaligned address_to |
| calculate the target address. |
| (md_apply_fix): Likewise. |
| (md_convert_frag): Update misaligned address calculation to |
| disregard ISA mode bit. |
| |
| 2019-08-19 Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * config/tc-mips.c (mips_move_labels): Retain ISA mode bit |
| when moving labels in text segments. |
| (mips_align): Indicate text mode when aligning labels in |
| text segments. |
| * gas/testsuite/gas/mips/insn-isa-mode.d: New test. |
| * gas/testsuite/gas/mips/insn-isa-mode.s: New test source. |
| * gas/testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2019-08-19 Barnaby Wilks <Barnaby.Wilks@arm.com> |
| |
| * config/tc-arm.c (md_atof): Add precision check. Formatting. |
| |
| 2019-08-15 Nick Clifton <nickc@redhat.com> |
| |
| * po/sv.po: Updated Swedish translation. |
| |
| 2019-08-12 Srinath Parvathaneni <srinath.parvathaneni@arm.com> |
| |
| * config/tc-arm.c (enum operand_parse_code): Add the entry OP_I48_I64. |
| (po_imm1_or_imm2_or_fail): Marco to check the immediate is either of |
| 48 or 64. |
| (parse_operands): Add case OP_I48_I64. |
| (do_mve_scalar_shift1): Add function to encode the MVE shift |
| instructions with 4 arguments. |
| * testsuite/gas/arm/mve-shift-bad.l: Modify. |
| * testsuite/gas/arm/mve-shift-bad.s: Likewise. |
| * testsuite/gas/arm/mve-shift.d: Likewise. |
| * testsuite/gas/arm/mve-shift.s: Likewise. |
| |
| 2019-08-12 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * config/tc-arm.c (enum fp_16bit_format): Add enum to represent the 2 float16 encodings. |
| (md_atof): Set precision for float16 type. |
| (arm_is_largest_exponent_ok): Check for whether to encode with the IEEE or alternative |
| format. |
| (set_fp16_format): Parse a float16_format directive. |
| (arm_parse_fp16_opt): Parse the fp16-format command line option. |
| (aeabi_set_public_attributes): For ELF encode the FP16 format EABI attribute. |
| * config/tc-arm.h (TC_LARGEST_EXPONENT_IS_NORMAL): Macro that expands to |
| arm_is_largest_exponent_ok. |
| (arm_is_largest_exponent_ok): Add prototype for arm_is_largest_exponent_ok function. |
| * doc/c-arm.texi: Add documentation for .float16, .float16_format and -mfp16-format= |
| * testsuite/gas/arm/float16-bad.d: New test. |
| * testsuite/gas/arm/float16-bad.l: New test. |
| * testsuite/gas/arm/float16-bad.s: New test. |
| * testsuite/gas/arm/float16-be.d: New test. |
| * testsuite/gas/arm/float16-format-bad.d: New test. |
| * testsuite/gas/arm/float16-format-bad.l: New test. |
| * testsuite/gas/arm/float16-format-bad.s: New test. |
| * testsuite/gas/arm/float16-format-opt-bad.d: New test. |
| * testsuite/gas/arm/float16-format-opt-bad.l: New test. |
| * testsuite/gas/arm/float16-le.d: New test. |
| * testsuite/gas/arm/float16.s: New test. |
| * testsuite/gas/arm/float16-eabi-alternative-format.d: New test. |
| * testsuite/gas/arm/float16-eabi-ieee-format.d: New test. |
| * testsuite/gas/arm/float16-eabi-no-format.d: New test. |
| * testsuite/gas/arm/float16-eabi.s: New test. |
| |
| 2019-08-12 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * config/atof-ieee.c (H_PRECISION): Macro for precision of float16 |
| type. |
| (atof_ieee): Set precision and exponent bits for encoding float16 |
| types. |
| (gen_to_words): NaN and Infinity encoding for float16. |
| (ieee_md_atof): Set precision for encoding float16 type. |
| |
| 2019-08-12 Alan Modra <amodra@gmail.com> |
| |
| PR 24851 |
| * config/tc-epiphany.c (md_estimate_size_before_relax): Clear |
| extra opcode bytes when changing from a 2-byte to a 4-byte insn. |
| |
| 2019-08-09 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/ilp32/x86-64-simd-intel.d, |
| testsuite/gas/i386/ilp32/x86-64-simd-suffix.d, |
| testsuite/gas/i386/ilp32/x86-64-simd.d: Redirect to parent dir |
| output expectations. |
| * testsuite/gas/i386/x86-64-simd-intel.d, |
| testsuite/gas/i386/x86-64-simd-suffix.d, |
| testsuite/gas/i386/x86-64-simd.d: Don't hard-code hex addresses |
| and symbol-relative offsets. |
| |
| 2019-08-08 Nick Clifton <nickc@redhat.com> |
| |
| PR 24887 |
| * testsuite/gas/i386/property-1.d: Adjust for new output format |
| from readelf. |
| * testsuite/gas/i386/property-2.d: Likewise. |
| * testsuite/gas/i386/x86-64-property-1.d: Likewise. |
| * testsuite/gas/i386/x86-64-property-2.d: Likewise. |
| |
| 2019-08-08 Yoshinori Sato <ysato@users.sourceforge.jp> |
| |
| * testsuite/gas/h8300/h8300.exp: Fix movfpe and movtpe tests. |
| * testsuite/gas/h8300/misc.s: Likewise. |
| * testsuite/gas/h8300/misch.s: Likewise. |
| * testsuite/gas/h8300/miscs.s: Likewise. |
| |
| 2019-08-05 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * config/tc-arm.c (do_mve_vqdmlah): Use N_S_32 macro. |
| (do_neon_qrdmlah): Use N_S_32 macro. |
| * testsuite/gas/arm/mve-vqdmlah-bad.d: New test. |
| * testsuite/gas/arm/mve-vqdmlah-bad.l: New test. |
| * testsuite/gas/arm/mve-vqdmlah-bad.s: New test. |
| * testsuite/gas/arm/mve-vqdmlah.d: Remove unsigned instruction tests. |
| * testsuite/gas/arm/mve-vqdmlah.s: Remove unsigned instruction tests. |
| * testsuite/gas/arm/mve-vqdmlash-bad.d: New test. |
| * testsuite/gas/arm/mve-vqdmlash-bad.l: New test. |
| * testsuite/gas/arm/mve-vqdmlash-bad.s: New test. |
| * testsuite/gas/arm/mve-vqdmlash.d: Remove unsigned instruction tests. |
| * testsuite/gas/arm/mve-vqdmlash.s: Remove unsigned instruction tests. |
| |
| 2019-07-30 Mel Chen <mel.chen@sifive.com> |
| |
| * testsuite/gas/riscv/alias-csr.s: Add testcase for CSR-access |
| alias instructions. |
| * testsuite/gas/riscv/no-aliases-csr.d: Run testcase alias-csr.s with |
| -Mno-aliases. |
| |
| * testsuite/gas/riscv/alias-csr.d: Run testcase alias-csr.s. |
| * testsuite/gas/riscv/priv-reg.d: Update. |
| |
| 2019-07-24 Nick Clifton <nickc@redhat.com> |
| |
| * po/sv.po: Updated Swedish translation. |
| |
| 2019-07-24 Claudiu Zissulescu <claziss@synopsys.com> |
| |
| * testsuite/gas/arc/nps400-6.d: Update test. |
| |
| 2019-07-24 Alan Modra <amodra@gmail.com> |
| |
| * config/obj-elf.c (obj_elf_section, obj_elf_type): Set has_gnu_osabi. |
| * testsuite/gas/elf/section12a.d: Update xfails. |
| * testsuite/gas/elf/section12b.d: Likewise. |
| |
| 2019-07-24 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/elf/section12a.d: xfail visium and cloudabi. |
| * testsuite/gas/elf/section12b.d: Likewise. |
| * testsuite/gas/elf/section13.d: Likewise. |
| |
| 2019-07-23 Kyrylo Tkachov <kyrylo.tkachov@arm.com> |
| |
| * testsuite/gas/aarch64/sysreg-4.s: Test gmid_el1 read. |
| * testsuite/gas/aarch64/sysreg-4.d: Update expected output. |
| * testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise. |
| |
| 2019-07-23 Alan Modra <amodra@gmail.com> |
| |
| * config/obj-elf.c (obj_elf_change_section): Don't emit a fatal |
| error for non-SHF_ALLOC SHF_GNU_MBIND here. |
| (obj_elf_parse_section_letters): Return SHF_GNU_MBIND in new |
| gnu_attr param. |
| (obj_elf_section): Adjust obj_elf_parse_section_letters call. |
| Formatting. Set SHF_GNU_MBIND and elf_osabi from gnu_attr. |
| Emit normal error for non-SHF_ALLOC SHF_GNU_MBIND and wrong osabi. |
| (obj_elf_type): Set elf_osabi for ifunc. |
| * testsuite/gas/elf/section12a.d: xfail msp430 and hpux. |
| * testsuite/gas/elf/section12b.d: Likewise. |
| * testsuite/gas/elf/section13.d: Likewise. |
| * testsuite/gas/elf/section13.l: Adjust expected error. |
| |
| 2019-07-23 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/elf/section12a.d: Don't skip for rx. |
| |
| 2019-07-22 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * config/tc-arm.c (do_mve_vqdmladh): Remove check for UNPREDICTABLE. |
| * testsuite/gas/arm/mve-vqdmladh-bad.l: Remove tests. |
| * testsuite/gas/arm/mve-vqdmladh-bad.s: Remove tests. |
| * testsuite/gas/arm/mve-vqdmladh.d: New tests. |
| * testsuite/gas/arm/mve-vqdmladh.s: New tests. |
| * testsuite/gas/arm/mve-vqdmlsdh-bad.l: Remove tests. |
| * testsuite/gas/arm/mve-vqdmlsdh-bad.s: Remove tests. |
| * testsuite/gas/arm/mve-vqdmlsdh.d: New tests. |
| * testsuite/gas/arm/mve-vqdmlsdh.s: New tests. |
| |
| 2019-07-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/gas/i386/noextreg.d: Pass -O0 to assembler. |
| |
| 2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/bpf/alu.d: Use %r6 instead of %ctx. |
| * testsuite/gas/bpf/lddw-be.d: Likewise. |
| * testsuite/gas/bpf/lddw.d: Likewise. |
| * testsuite/gas/bpf/alu-be.d: Likewise. |
| * testsuite/gas/bpf/alu32.d: Likewise. |
| |
| 2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-bpf.c (pe_lcomm_internal): Adapted from tc-i386.c. |
| (pe_lcomm): Likewise. |
| (md_pseudo_table): Use pe_lcomm to implement .lcomm. |
| |
| 2019-07-19 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * doc/c-aarch64.texi: Remame the +bitperm extension to +sve2-bitperm. |
| * config/tc-aarch64.c (aarch64_features): Likewise. |
| * testsuite/gas/aarch64/illegal-sve2-aes.d: Update accordingly. |
| * testsuite/gas/aarch64/illegal-sve2-sha3.d: Likewise. |
| * testsuite/gas/aarch64/illegal-sve2-sm4.d: Likewise. |
| * testsuite/gas/aarch64/illegal-sve2.d: Likewise. |
| * testsuite/gas/aarch64/sve2.d: Likewise. |
| |
| 2019-07-19 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel", |
| "got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel". |
| (fixup_size, md_assemble): Handle pcrel tls relocs. |
| (ppc_force_relocation, ppc_fix_adjustable): Likewise. |
| (md_apply_fix, tc_gen_reloc): Likewise. |
| |
| 2019-07-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-bpf.c: Make .lcomm to get a third argument with the |
| alignment. |
| |
| 2019-07-17 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * config/tc-bpf.c (md_pseudo_table): .half, .word and .dword. |
| |
| * testsuite/gas/bpf/data.s: New file. |
| * testsuite/gas/bpf/data.d: Likewise. |
| * testsuite/gas/bpf/data-be.d: Likewise. |
| * testsuite/gas/bpf/bpf.exp: Run data and data-be. |
| * doc/c-bpf.texi (BPF Directives): New section. |
| |
| 2019-07-17 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (check_hle, md_assemble, check_VecOperands, |
| match_template, check_string, build_modrm_byte): Replace |
| operand_type_check(..., anymem) by Operand_Mem ones. |
| (process_operands): Also copy i.flags[] when copying other |
| operand properties. |
| |
| 2019-07-16 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (match_template): Adjust regmem reference. |
| Adjust comment and update regmem when swapping operands. |
| (build_modrm_byte): Drop clearing of regmem and stale part of |
| comment. Correct comment. Adjust regmem reference. |
| |
| 2019-07-16 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (type_names): Replace SReg entries. |
| (pi, check_byte_reg, build_modrm_byte, i386_att_operand, |
| parse_real_register): Switch to using sreg field. |
| (process_operands): Likewise. Extend handling of PUSH/POP of |
| segment registers. Drop dead setting of REX_B. |
| * config/tc-i386-intel.c (i386_intel_simplify_register, |
| i386_intel_operand): Switch to using sreg field. |
| * testsuite/gas/i386/x86-64-opcode.s: Add PUSH/POP of %fs/%gs. |
| * testsuite/gas/i386/x86-64-opcode.d: Adjust expectations. |
| * testsuite/gas/i386/ilp32/x86-64-opcode.d: Use parent dir |
| expectations. |
| |
| 2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/bpf/mem.s: ldabs instructions do not take a `src' |
| register as an argument. |
| * testsuite/gas/bpf/mem.d: Updated accordingly. |
| * testsuite/gas/bpf/mem-be.d: Likewise. |
| * doc/c-bpf.texi (BPF Opcodes): Update to reflect the correct |
| explicit arguments to ldabs and ldind instructions. |
| |
| 2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * testsuite/gas/bpf/mem.s: Do not use explicit arguments for |
| ldabs and ldind instructions. |
| * testsuite/gas/bpf/mem.d: Updated accordingly. |
| * testsuite/gas/bpf/mem-be.d: Likewise. |
| |
| 2019-07-09 Alan Modra <amodra@gmail.com> |
| |
| * config/obj-elf.c (elf_frob_symbol): Remove mips hacks. |
| * config/tc-mips.h (tc_frob_symbol): Define. |
| (mips_frob_symbol): Declare. |
| * config/tc-mips.c (s_mips_globl): Don't set BSF_OBJECT for irix. |
| (mips_frob_symbol): Fudge symbols for irix here. |
| * testsuite/gas/elf/type-2.e: Allow random target symbols. |
| |
| 2019-07-05 Kito Cheng <kito.cheng@sifive.com> |
| |
| * doc/c-riscv.texi (Instruction Formats): Add r4 type. |
| * testsuite/gas/riscv/insn.d: Add testcase for r4 type. |
| * testsuite/gas/riscv/insn.s: Ditto. |
| |
| * doc/c-riscv.texi (Instruction Formats): Add b and j type. |
| * testsuite/gas/riscv/insn.d: Add test case for b and j type. |
| * testsuite/gas/riscv/insn.s: Ditto. |
| |
| * testsuite/gas/riscv/insn.s: Correct instruction type for load |
| and store. |
| |
| * testsuite/gas/riscv/insn.d: Using regular expression to match |
| address. |
| |
| * doc/c-riscv.texi (Instruction Formats): Fix encoding table for SB |
| type and fix typo. |
| |
| 2019-07-04 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (md_parse_option): Don't blindly accept all |
| -Q options. |
| (md_show_usage): Correctly name the ignored -Q option flavors. |
| |
| 2019-07-04 Jan Beulich <jbeulich@suse.com> |
| |
| * config/obj-elf.c (obj_elf_type): Check for conflicts between |
| old and new types. |
| * config/tc-hppa.h (md_elf_symbol_type_change): New. |
| * doc/as.texi: Mention warning behavior for the ELF flavor of |
| .type. |
| * testsuite/gas/elf/type-2.e, testsuite/gas/elf/type-2.l, |
| testsuite/gas/elf/type-2.s: New. |
| * testsuite/gas/elf/elf.exp: Run new test. |
| |
| 2019-07-03 Nick Clifton <nickc@redhat.com> |
| |
| * testsuite/gas/aarch64/codealign.d: Update to work with a |
| toolchain configured to generate build notes. |
| * testsuite/gas/aarch64/codealign_1.d: Likewise. |
| * testsuite/gas/aarch64/dwarf.d: Likewise. |
| * testsuite/gas/aarch64/mapmisc.d: Likewise. |
| * testsuite/gas/aarch64/mapping.d: Likewise. |
| * testsuite/gas/aarch64/mapping2.d: Likewise. |
| * testsuite/gas/aarch64/mapping3.d: Likewise. |
| * testsuite/gas/aarch64/mapping4.d: Likewise. |
| * testsuite/gas/aarch64/mapping_5.d: Likewise. |
| * testsuite/gas/aarch64/mapping_6.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_1.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_10.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_11.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_12.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_13.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_14.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_15.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_16.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_17.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_18.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_19.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_2.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_20.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_21.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_22.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_23.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_24.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_25.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_26.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_27.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_3.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_4.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_5.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_6.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_7.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_8.d: Likewise. |
| * testsuite/gas/aarch64/sve-movprfx_9.d: Likewise. |
| * testsuite/gas/aarch64/symbol-variant_pcs-1.d: Likewise. |
| * testsuite/gas/aarch64/symbol-variant_pcs-2.d: Likewise. |
| * testsuite/gas/aarch64/symbol-variant_pcs-3.d: Likewise. |
| * testsuite/gas/all/assign.d: Likewise. |
| * testsuite/gas/all/none.d: Likewise. |
| * testsuite/gas/all/weakref1.d: Likewise. |
| * testsuite/gas/arm/got_prel.d: Likewise. |
| * testsuite/gas/arm/local_function.d: Likewise. |
| * testsuite/gas/arm/mapdir.d: Likewise. |
| * testsuite/gas/arm/mapmisc.d: Likewise. |
| * testsuite/gas/arm/mapping2.d: Likewise. |
| * testsuite/gas/arm/mapping3.d: Likewise. |
| * testsuite/gas/arm/mapping4.d: Likewise. |
| * testsuite/gas/arm/mapsecs.d: Likewise. |
| * testsuite/gas/arm/mapshort-eabi.d: Likewise. |
| * testsuite/gas/arm/thumbrel.d: Likewise. |
| * testsuite/gas/arm/unwind.d: Likewise. |
| * testsuite/gas/cfi/cfi-label.d: Likewise. |
| * testsuite/gas/elf/elf.exp: Likewise. |
| * testsuite/gas/i386/bss.d: Likewise. |
| * testsuite/gas/i386/ifunc-3.d: Likewise. |
| * testsuite/gas/i386/ilp32/mixed-mode-reloc64.d: Likewise. |
| * testsuite/gas/i386/ilp32/quad.d: Likewise. |
| * testsuite/gas/i386/ilp32/reloc64.d: Likewise. |
| * testsuite/gas/i386/ilp32/x86-64-size-1.d: Likewise. |
| * testsuite/gas/i386/ilp32/x86-64-size-3.d: Likewise. |
| * testsuite/gas/i386/ilp32/x86-64-size-5.d: Likewise. |
| * testsuite/gas/i386/ilp32/x86-64-unwind.d: Likewise. |
| * testsuite/gas/i386/mixed-mode-reloc32.d: Likewise. |
| * testsuite/gas/i386/mixed-mode-reloc64.d: Likewise. |
| * testsuite/gas/i386/nop-6.d: Likewise. |
| * testsuite/gas/i386/property-1.d: Likewise. |
| * testsuite/gas/i386/property-2.d: Likewise. |
| * testsuite/gas/i386/relax.d: Likewise. |
| * testsuite/gas/i386/reloc64.d: Likewise. |
| * testsuite/gas/i386/size-1.d: Likewise. |
| * testsuite/gas/i386/size-3.d: Likewise. |
| * testsuite/gas/i386/x86-64-nop-6.d: Likewise. |
| * testsuite/gas/i386/x86-64-property-1.d: Likewise. |
| * testsuite/gas/i386/x86-64-property-2.d: Likewise. |
| * testsuite/gas/i386/x86-64-size-1.d: Likewise. |
| * testsuite/gas/i386/x86-64-size-3.d: Likewise. |
| * testsuite/gas/i386/x86-64-size-5.d: Likewise. |
| * testsuite/gas/i386/x86-64-unwind.d: Likewise. |
| * testsuite/gas/macros/irp.d: Likewise. |
| * testsuite/gas/macros/repeat.d: Likewise. |
| * testsuite/gas/macros/rept.d: Likewise. |
| * testsuite/gas/macros/test2.d: Likewise. |
| * testsuite/gas/macros/test3.d: Likewise. |
| * testsuite/gas/macros/vararg.d: Likewise. |
| * testsuite/gas/ppc/astest2.d: Likewise. |
| * testsuite/gas/ppc/astest2_64.d: Likewise. |
| * testsuite/gas/ppc/astest64.d: Likewise. |
| * testsuite/gas/ppc/power4.d: Likewise. |
| * testsuite/gas/ppc/test1elf64.d: Likewise. |
| |
| 2019-07-02 Barnaby Wilks <barnaby.wilks@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Add error check. |
| * testsuite/gas/aarch64/diagnostic.l: New test. |
| * testsuite/gas/aarch64/diagnostic.s: New test. |
| * testsuite/gas/aarch64/illegal.l: New tests. |
| * testsuite/gas/aarch64/illegal.s: New tests. |
| |
| 2019-07-02 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * testsuite/gas/aarch64/sve-movprfx_27.s, |
| * testsuite/gas/aarch64/sve-movprfx_27.d: New test. |
| |
| 2019-07-02 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * testsuite/gas/aarch64/sve-movprfx_26.s: Also test FCVTZS, FCVTZU, |
| SCVTF, UCVTF, LSR and ASR. |
| * testsuite/gas/aarch64/sve-movprfx_26.d: Update accordingly. |
| * testsuite/gas/aarch64/sve-movprfx_26.l: Likewise. |
| |
| 2019-07-02 Richard Sandiford <richard.sandiford@arm.com> |
| |
| * testsuite/gas/aarch64/sve-movprfx_25.s: Allow CPY Z1.D.P1/M,X1 |
| to be prefixed by MOVPRFX. |
| * testsuite/gas/aarch64/sve-movprfx_25.d: Update accordingly. |
| * testsuite/gas/aarch64/sve-movprfx_25.l: Likewise. |
| |
| 2019-07-01 Nick Clifton <nickc@redhat.com> |
| |
| PR 24748 |
| * write.c (create_note_reloc): Add desc2_offset parameter. Change |
| name of offset parameter to note_offset. Only use desc2_offset |
| when placing addend into REL reloc's address space. |
| (maybe_generate_build_notes): Update parameters passed to |
| create_note_reloc. |
| |
| 2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests. |
| * testsuite/gas/aarch64/illegal-sve2.l: Update tests. |
| * doc/c-aarch64.texi: Add special note of pmull{t,b} |
| instructions under the sve2-aes architecture extension. |
| * testsuite/gas/aarch64/illegal-sve2.s: Add small size |
| pmull{t,b} instructions. |
| * testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b} |
| disassembly. |
| * testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b} |
| instructions. |
| |
| 2019-07-01 Nick Clifton <nickc@redhat.com> |
| |
| PR 24738 |
| * doc/c-i386.texi (i386-Directives): Add a description of the |
| Value directive. |
| |
| 2019-07-01 Nick Clifton <nickc@redhat.com> |
| |
| PR 24737 |
| * doc/as.texi (Align): Add missing word to description of |
| pseudo-op. |
| (P2align): Likewise. |
| |
| 2019-06-28 Nick Clifton <nickc@redhat.com> |
| |
| PR 24735 |
| * doc/as.texi (Zero): Fix spelling typo. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (vec_imm4): Delete. |
| (VEX_check_operands): Replace Vec_Imm4 check by CpuXOP with five |
| operands one. Clear Imm<N> by different means. |
| (build_modrm_byte): Adjust comment. Remove dead code. Add and |
| adjust assertions. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (output_insn): Adjust recognition of xFENCE |
| insns. Move PadLock special case of prefix emission to 3-byte |
| long base opcode handling. |
| (i386_index_check): Check for CpuPadLock instead of ImmExt. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_encoding): Handle AND / OR with |
| both operands being the same register. |
| * doc/c-i386.texi: Update -O2 documentation. |
| * testsuite/gas/i386/optimize-2.s, |
| testsuite/gas/i386/x86-64-optimize-3.s: Add cases of AND / OR |
| with both operands being the same register. |
| * testsuite/gas/i386/optimize-2.d, |
| testsuite/gas/i386/x86-64-optimize-3.d: Adjust expectations. |
| * testsuite/gas/i386/optimize-2b.d, |
| testsuite/gas/i386/x86-64-optimize-3b.d: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (commutative): New. |
| (build_vex_prefix): Handle commutative case. |
| (optimize_encoding): Set commutative flag when appropriate. |
| * doc/c-i386.texi: Update -O2 documentation. |
| * testsuite/gas/i386/ilp32/x86-64-sse2avx.d: Re-use parent dir |
| output. |
| * testsuite/gas/i386/x86-64-sse2avx.s: Add tests with high |
| numbered source operands. |
| * testsuite/gas/i386/x86-64-optimize-2.d, |
| testsuite/gas/i386/x86-64-optimize-2b.d, |
| testsuite/gas/i386/x86-64-optimize-3.d, |
| testsuite/gas/i386/x86-64-optimize-5.d, |
| testsuite/gas/i386/x86-64-optimize-6.d, |
| testsuite/gas/i386/x86-64-sse2avx.d: Adjust expectations. |
| * testsuite/gas/i386/x86-64-avx-swap-2.d, |
| testsuite/gas/i386/x86-64-avx-swap-2.s: New. |
| * testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (is_evex_encoding): Don't check for SAE. |
| (check_VecOperands): Simplify static rounding / SAE checking. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_encoding): Make j unsigned. Handle |
| vpand{d,q}, vpandn{d,q}, vpor{d,q}, and vpxor{d,q}. Also check/ |
| clear broadcast. Eliminate a loop. |
| * doc/c-i386.texi: Update -O1 documentation. |
| * testsuite/gas/i386/optimize-1.s, |
| testsuite/gas/i386/optimize-2.s, |
| testsuite/gas/i386/optimize-3.s, |
| testsuite/gas/i386/optimize-5.s, |
| testsuite/gas/i386/x86-64-optimize-2.s, |
| testsuite/gas/i386/x86-64-optimize-3.s, |
| testsuite/gas/i386/x86-64-optimize-4.s, |
| testsuite/gas/i386/x86-64-optimize-6.s: Add vpand{d,q}, |
| vpandn{d,q}, vpor{d,q}, and vpxor{d,q} cases. |
| testsuite/gas/i386/optimize-1.d, |
| testsuite/gas/i386/optimize-1a.d, |
| testsuite/gas/i386/optimize-2.d, |
| testsuite/gas/i386/optimize-3.d, |
| testsuite/gas/i386/optimize-4.d, |
| testsuite/gas/i386/optimize-5.d, |
| testsuite/gas/i386/x86-64-optimize-2.d, |
| testsuite/gas/i386/x86-64-optimize-2a.d, |
| testsuite/gas/i386/x86-64-optimize-2b.d, |
| testsuite/gas/i386/x86-64-optimize-3.d, |
| testsuite/gas/i386/x86-64-optimize-4.d, |
| testsuite/gas/i386/x86-64-optimize-5.d, |
| testsuite/gas/i386/x86-64-optimize-6.d: Adjust expectations. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/avx512f_vpclmulqdq.s, |
| testsuite/gas/i386/avx512vl_vpclmulqdq.s, |
| testsuite/gas/i386/vpclmulqdq.s, |
| testsuite/gas/i386/x86-64-avx512f_vpclmulqdq.s, |
| testsuite/gas/i386/x86-64-avx512vl_vpclmulqdq.s: Add pseudo ops. |
| * testsuite/gas/i386/x86-64-vpclmulqdq.s: Likewise. Don't use |
| high 16 [xy]mm registers. |
| * testsuite/gas/i386/avx512f_vpclmulqdq.d, |
| testsuite/gas/i386/avx512f_vpclmulqdq-intel.d, |
| testsuite/gas/i386/avx512vl_vpclmulqdq.d, |
| testsuite/gas/i386/avx512vl_vpclmulqdq-intel.d, |
| testsuite/gas/i386/vpclmulqdq.d, |
| testsuite/gas/i386/vpclmulqdq-intel.d, |
| testsuite/gas/i386/x86-64-avx512f_vpclmulqdq.d, |
| testsuite/gas/i386/x86-64-avx512f_vpclmulqdq-intel.d, |
| testsuite/gas/i386/x86-64-avx512vl_vpclmulqdq.d, |
| testsuite/gas/i386/x86-64-avx512vl_vpclmulqdq-intel.d, |
| testsuite/gas/i386/x86-64-vpclmulqdq.d, |
| testsuite/gas/i386/x86-64-vpclmulqdq-intel.d: Adjust |
| expectations. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * tc-i386.c (output_disp, output_imm): Use encoding_length. |
| |
| 2019-07-01 Jan Beulich <jbeulich@suse.com> |
| |
| * tc-i386.c (encoding_length): New. |
| (output_insn): Use it. |
| * testsuite/gas/i386/oversized16.l, |
| testsuite/gas/i386/oversized16.s, |
| testsuite/gas/i386/oversized64.l, |
| testsuite/gas/i386/oversized64.s: New. |
| * testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2019-06-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/24719 |
| * testsuite/gas/i386/disassem.s: Add test for vgatherpf0dps |
| with invalid vector length. |
| * testsuite/gas/i386/x86-64-disassem.s: Likewise. |
| * testsuite/gas/i386/disassem.d: Updated. |
| * testsuite/gas/i386/x86-64-disassem.d: Likewise. |
| |
| 2019-06-27 Barnaby Wilk s<barnaby.wilks@arm.com> |
| |
| * config/tc-arm.c (do_smc): Add range check for immediate operand. |
| (do_t_smc): Add range check for immediate operand. Remove |
| obsolete immediate encoding. |
| (md_apply_fix): Fix range check. Remove obsolete immediate encoding. |
| * testsuite/gas/arm/arch6zk.d: Fix test. |
| * testsuite/gas/arm/arch6zk.s: Fix test. |
| * testsuite/gas/arm/smc-bad.d: New test. |
| * testsuite/gas/arm/smc-bad.l: New test. |
| * testsuite/gas/arm/smc-bad.s: New test. |
| * testsuite/gas/arm/thumb32.d: Fix test. |
| * testsuite/gas/arm/thumb32.s: Fix test. |
| |
| 2019-06-27 Jan Beulich <jbeulich@suse.com> |
| |
| config/tc-i386.c (md_assemble): Check for protected mode |
| incapable processor before encoding VEX and alike insns. |
| * testsuite/gas/i386/inval-16.s: For 80186 architecture. |
| * testsuite/gas/i386/inval-16.l: Adjust expectations. |
| * testsuite/gas/i386/avx-16bit.d, |
| testsuite/gas/i386/avx-16bit.s, |
| testsuite/gas/i386/avx512f-16bit.d, |
| testsuite/gas/i386/avx512f-16bit.s, |
| testsuite/gas/i386/bmi-16bit.d, |
| testsuite/gas/i386/bmi-16bit.s, |
| testsuite/gas/i386/bmi2-16bit.d, |
| testsuite/gas/i386/bmi2-16bit.s, |
| testsuite/gas/i386/lwp-16bit.d, |
| testsuite/gas/i386/lwp-16bit.s: New |
| testsuite/gas/i386/i386.exp: Run new tests. |
| |
| 2019-06-26 Jim Wilson <jimw@sifive.com> |
| |
| * testsuite/gas/xstormy16/allinsn.sh: Change first line to |
| #!/bin/bash and make it executable. |
| * testsuite/gas/xstormy16/gcc.sh: Likewise. |
| |
| 2019-06-26 Lili Cui <lili.cui@intel.com> |
| |
| * doc/c-i386.texi: Document x/y/z instruction sufffixes in AT&T |
| syntax and xmmword/ymmword/zmmword/fword/tbyte/oword ptr in |
| Intel syntax. |
| |
| 2019-06-25 Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * config/tc-mips.c (macro) <M_LI>: Re-order MTHC1 with |
| respect to MTC1 and use $0 for either part where possible. |
| * testsuite/gas/mips/li-d.s: Add test cases for non-zero |
| words in double precision constants. |
| * testsuite/gas/mips/li-d.d: Update reference output. |
| * testsuite/gas/mips/micromips@isa-override-1.d: Likewise. |
| * testsuite/gas/mips/mips32r2@isa-override-1.d: Likewise. |
| * testsuite/gas/mips/mips64r2@isa-override-1.d: Likewise. |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * tc-i386.c (acc32, acc64): Delete. |
| (pi): Make first parameter pinter-to-const. |
| (type_names): Remove Acc. Add acc8, acc16, acc32, and acc64. |
| (pt): Use operand_type_equal(). |
| (match_template): Replace use of acc32. |
| (process_suffix): Replace use of acc64. |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * doc/c-i386.texi: Mark -mavxscalar= and -mvexwig as dangrous to |
| use. |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * tc-i386.c (process_suffix): Use is_any_vex_encoding(). |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/sse2-16bit.d, |
| testsuite/gas/i386/sse2-16bit.s: New. |
| testsuite/gas/i386/i386.exp: Run new test. |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * config/tc-i386.c (optimize_encoding): Also handle ANDQ with |
| immediatie fitting in 7 bits. |
| * testsuite/gas/i386/x86-64-optimize-1.s: Add ANDQ cases with |
| 7- and 8-bit immediates. |
| * testsuite/gas/i386/x86-64-optimize-1.d: Adjust expectations. |
| |
| 2019-06-25 Jan Beulich <jbeulich@suse.com> |
| |
| * testsuite/gas/i386/xmmword.s: Add cvtps2pi and cvttps2pi |
| tests. |
| * testsuite/gas/i386/xmmword.l: Adjust expectations. |
| |
| 2019-06-25 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_handle_align): Add parentheses. |
| |
| 2019-06-25 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.h (ppc_nop_select): Declare. |
| (NOP_OPCODE): Define. |
| * config/tc-ppc.c (ppc_elf_end, ppc_xcoff_end): Zero ppc_cpu. |
| (ppc_nop_encoding_for_rs_align_code): New enum. |
| (ppc_nop_select): New function. |
| (ppc_handle_align): Don't use ppc_cpu here. Get nop type from frag. |
| * testsuite/gas/ppc/groupnop.d, |
| * testsuite/gas/ppc/groupnop.s: New test. |
| * testsuite/gas/ppc/ppc.exp: Run it. |
| |
| 2019-06-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/24700 |
| * testsuite/gas/i386/disassem.s: Add test for vbroadcasti32x8 |
| with invalid vector length. |
| * testsuite/gas/i386/x86-64-disassem.s: Likewise. |
| * testsuite/gas/i386/disassem.d: Updated. |
| * testsuite/gas/i386/x86-64-disassem.d: Likewise. |
| |
| 2019-06-17 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/24691 |
| * testsuite/gas/i386/disassem.s: Add test for vshuff32x4 with |
| invalid vector length. |
| * testsuite/gas/i386/x86-64-disassem.s: Likewise. |
| * testsuite/gas/i386/disassem.d: Updated. |
| * testsuite/gas/i386/x86-64-disassem.d: Likewise. |
| |
| 2019-06-14 Alan Modra <amodra@gmail.com> |
| |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| |
| 2019-06-12 Peter Bergner <bergner@linux.ibm.com> |
| |
| * testsuite/gas/ppc/power9.d: Delete ldmx tests. |
| * testsuite/gas/ppc/power9.s: Likewise. |
| |
| 2019-06-06 Lili Cui <lili.cui@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .enqcmd. |
| (cpu_noarch): Add noenqcmd. |
| * doc/c-i386.texi: Document noenqcmd. |
| |
| 2019-06-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/24633 |
| * testsuite/gas/i386/disassem.s: Add tests for invalid vector |
| lengths for EVEX vextractfXX and vinsertfXX. |
| * testsuite/gas/i386/x86-64-disassem.s: Likewise. |
| * testsuite/gas/i386/disassem.d: Updated. |
| * testsuite/gas/i386/x86-64-disassem.d: Likewise. |
| |
| 2019-06-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/24626 |
| * testsuite/gas/i386/disassem.s: Add tests for reserved VEX.vvvv |
| and EVEX.vvvv. |
| * testsuite/gas/i386/x86-64-disassem.s: Likewise. |
| * testsuite/gas/i386/disassem.d: Updated. |
| * testsuite/gas/i386/x86-64-disassem.d: Likewise. |
| |
| 2019-06-04 Igor Tsimbalist <igor.v.tsimbalist@intel.com> |
| Lili Cui <lili.cui@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .avx512_vp2intersect. |
| (cpu_noarch): Likewise. |
| * doc/c-i386.texi: Document avx512_vp2intersect. |
| * testsuite/gas/i386/i386.exp: Run vp2intersect tests. |
| * testsuite/gas/i386/vp2intersect-intel.d: New test. |
| * testsuite/gas/i386/vp2intersect.d: Likewise. |
| * testsuite/gas/i386/vp2intersect.s: Likewise. |
| * testsuite/gas/i386/vp2intersect-inval-bcast.l: Likewise. |
| * testsuite/gas/i386/vp2intersect-inval-bcast.s: Likewise. |
| * testsuite/gas/i386/x86-64-vp2intersect-intel.d: Likewise. |
| * testsuite/gas/i386/x86-64-vp2intersect.d: Likewise. |
| * testsuite/gas/i386/x86-64-vp2intersect.s: Likewise. |
| * testsuite/gas/i386/x86-64-vp2intersect-inval-bcast.l: Likewise. |
| * testsuite/gas/i386/x86-64-vp2intersect-inval-bcast.s: Likewise. |
| |
| 2019-06-04 Xuepeng Guo <xuepeng.guo@intel.com> |
| Lili Cui <lili.cui@intel.com> |
| |
| * doc/c-i386.texi: Document enqcmd. |
| * testsuite/gas/i386/enqcmd-intel.d: New file. |
| * testsuite/gas/i386/enqcmd-inval.l: Likewise. |
| * testsuite/gas/i386/enqcmd-inval.s: Likewise. |
| * testsuite/gas/i386/enqcmd.d: Likewise. |
| * testsuite/gas/i386/enqcmd.s: Likewise. |
| * testsuite/gas/i386/x86-64-enqcmd-intel.d: Likewise. |
| * testsuite/gas/i386/x86-64-enqcmd-inval.l: Likewise. |
| * testsuite/gas/i386/x86-64-enqcmd-inval.s: Likewise. |
| * testsuite/gas/i386/x86-64-enqcmd.d: Likewise. |
| * testsuite/gas/i386/x86-64-enqcmd.s: Likewise. |
| * testsuite/gas/i386/i386.exp: Run enqcmd-intel, enqcmd-inval, |
| enqcmd, x86-64-enqcmd-intel, x86-64-enqcmd-inval, |
| and x86-64-enqcmd. |
| |
| 2019-05-30 Jim Wilson <jimw@sifive.com> |
| |
| * config/tc-riscv.c (riscv_ip) <'u'>: Move O_constant check inside if |
| statement. Delete O_symbol and O_constant check after if statement. |
| * testsuite/gas/riscv/auipc-parsing.s: Test lui with missing %hi. |
| * testsuite/gas/riscv/auipc-parsing.l: Update. |
| |
| 2019-05-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/24625 |
| * testsuite/gas/i386/inval-avx512f.s: Add tests for AVX512_BF16 |
| instructions with invalid broadcast. |
| * testsuite/gas/i386/x86-64-inval-avx512f.s: Likewise. |
| * testsuite/gas/i386/inval-avx512f.l: Updated. |
| * testsuite/gas/i386/x86-64-inval-avx512f.l: Likewise. |
| |
| 2019-05-27 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (is_ppc64_target): New function. |
| (md_show_usage): Split up usage message. Don't show -a64 when |
| unsupported. |
| testsuite/gas/ppc/ppc.exp (supports_ppc64): New. |
| (prefix-reloc): Only run for ppc64. |
| |
| 2019-05-24 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-aarch64.c (aarch64_elf_copy_symbol_attributes): Define. |
| * config/tc-aarch64.h (aarch64_elf_copy_symbol_attributes): Declare. |
| (OBJ_COPY_SYMBOL_ATTRIBUTES): Define. |
| * testsuite/gas/aarch64/symbol-variant_pcs-3.d: New test. |
| * testsuite/gas/aarch64/symbol-variant_pcs-3.s: New test. |
| |
| 2019-05-24 Szabolcs Nagy <szabolcs.nagy@arm.com> |
| |
| * config/tc-aarch64.c (s_variant_pcs): New function. |
| * doc/c-aarch64.texi: Document .variant_pcs. |
| * testsuite/gas/aarch64/symbol-variant_pcs-1.d: New test. |
| * testsuite/gas/aarch64/symbol-variant_pcs-1.s: New test. |
| * testsuite/gas/aarch64/symbol-variant_pcs-2.d: New test. |
| * testsuite/gas/aarch64/symbol-variant_pcs-2.s: New test. |
| |
| 2019-05-24 Alan Modra <amodra@gmail.com> |
| |
| * po/POTFILES.in: Regenerate. |
| |
| 2019-05-24 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_elf_suffix): Support @pcrel, @got@pcrel, |
| @plt@pcrel, @higher34, @highera34, @highest34, and @highesta34. |
| (fixup_size): Handle new powerxx relocs. |
| (md_assemble): Warn for @pcrel on non-prefix insns. |
| Accept @l, @h and @ha on prefix insns, and infer reloc without |
| any @ suffix. Translate powerxx relocs to suit DQ and DS field |
| instructions. Include operand tests as well as opcode test to |
| translate BFD_RELOC_HI16_S to BFD_RELOC_PPC_16DX_HA. |
| (ppc_fix_adjustable): Return false for pcrel GOT and PLT relocs. |
| (md_apply_fix): Handle new powerxx relocs. |
| * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): Accept |
| BFD_RELOC_PPC64_ADDR16_HIGHER34, BFD_RELOC_PPC64_ADDR16_HIGHERA34, |
| BFD_RELOC_PPC64_ADDR16_HIGHEST34, BFD_RELOC_PPC64_ADDR16_HIGHESTA34, |
| BFD_RELOC_PPC64_D34, and BFD_RELOC_PPC64_D28. |
| * testsuite/gas/ppc/prefix-reloc.d, |
| * testsuite/gas/ppc/prefix-reloc.s: New test. |
| * testsuite/gas/ppc/ppc.exp: Run it. |
| |
| 2019-05-24 Peter Bergner <bergner@linux.ibm.com> |
| Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_insert_operand): Only sign extend fields that |
| are 32-bits or smaller. |
| * messages.c (as_internal_value_out_of_range): Do not truncate |
| variables and use BFD_VMA_FMT to print them. |
| * testsuite/gas/ppc/prefix-pcrel.s, |
| * testsuite/gas/ppc/prefix-pcrel.d: New test. |
| * testsuite/gas/ppc/ppc.exp: Run it. |
| |
| 2019-05-24 Peter Bergner <bergner@linux.ibm.com> |
| Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes. |
| (struct insn_label_list): New. |
| (insn_labels, free_insn_labels): New variables. |
| (ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs. |
| (ppc_frob_label, ppc_new_dot_label): Move functions earlier in file |
| and call ppc_record_label. |
| (md_assemble): Handle 64-bit prefix instructions. Align labels |
| that are on the same line as a prefix instruction. |
| * config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to |
| later in the file. |
| (md_start_line_hook): Define. |
| (ppc_start_line_hook): Declare. |
| * testsuite/gas/ppc/prefix-align.d, |
| * testsuite/gas/ppc/prefix-align.s: New test. |
| * testsuite/gas/ppc/ppc.exp: Run new test. |
| |
| 2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com> |
| |
| * configure.ac: Handle bpf-*-* targets. |
| * configure.tgt (generic_target): Likewise. |
| * configure: Regenerate. |
| * Makefile.am (TARGET_CPU_CFILES): Add tc-bpf.c. |
| (TARGET_CPU_HFILES): Add tc-bpf.h. |
| * Makefile.in: Regenerated. |
| * config/tc-bpf.c: New file. |
| * config/tc-bpf.h: Likewise. |
| * doc/Makefile.am (CPU_DOCS): Add c-bpf.texi. |
| * doc/Makefile.in: Regenerated. |
| * doc/all.texi: set BPF. |
| * doc/as.texi: Add eBPF contents. |
| * doc/c-bpf.texi: New file. |
| * testsuite/gas/bpf/alu.d: New file. |
| * testsuite/gas/bpf/mem-be.d: Likewise. |
| * testsuite/gas/bpf/mem.s: Likewise. |
| * testsuite/gas/bpf/mem.d: Likewise. |
| * testsuite/gas/bpf/lddw-be.d: Likewise. |
| * testsuite/gas/bpf/lddw.s: Likewise. |
| * testsuite/gas/bpf/lddw.d: Likewise. |
| * testsuite/gas/bpf/jump-be.d: Likewise. |
| * testsuite/gas/bpf/jump.s: Likewise. |
| * testsuite/gas/bpf/jump.d: Likewise. |
| * testsuite/gas/bpf/exit-be.d: Likewise. |
| * testsuite/gas/bpf/exit.s: Likewise. |
| * testsuite/gas/bpf/exit.d: Likewise. |
| * testsuite/gas/bpf/call-be.d: Likewise. |
| * testsuite/gas/bpf/call.s: Likewise. |
| * testsuite/gas/bpf/call.d: Likewise. |
| * testsuite/gas/bpf/bpf.exp: Likewise. |
| * testsuite/gas/bpf/atomic-be.d: Likewise. |
| * testsuite/gas/bpf/atomic.s: Likewise. |
| * testsuite/gas/bpf/atomic.d: Likewise. |
| * testsuite/gas/bpf/alu-be.d: Likewise. |
| * testsuite/gas/bpf/alu32-be.d: Likewise. |
| * testsuite/gas/bpf/alu32.s: Likewise. |
| * testsuite/gas/bpf/alu32.d: Likewise. |
| * testsuite/gas/bpf/alu.s: Likewise. |
| * testsuite/gas/all/gas.exp: Introduce a nop_type for eBPF. |
| * testsuite/gas/all/org-1.s: Support nop_type 6. |
| * testsuite/gas/all/org-1.l: Updated to reflect changes in |
| org-1.s. |
| |
| 2019-05-22 John Darrington <john@darrington.wattle.id.au> |
| |
| * config/tc-s12z.c (s12z_strtol): New function. (md_show_usage): Update. |
| (md_parse_option): new case OPTION_DOLLAR_HEX. (s12z_init_after_args): |
| (<global>): Use s12z_strtol instead of strtol. |
| * doc/c-s12z.texi (S12Z Options): Document new option -mdollar-hex. |
| * testsuite/gas/s12z/dollar-hex.d: New file. |
| * testsuite/gas/s12z/dollar-hex.s: New file. |
| * testsuite/gas/s12z/s12z.exp: Add them. |
| |
| 2019-05-21 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-arm.c (parse_operands): Update case OP_RVC to |
| parse p0 and P0. |
| (do_vmrs): Add checks for valid operands with respect to |
| cpu and fpu options. |
| (do_vmsr): Likewise. |
| (reg_names): New reg_names for FPSCR_nzcvqc, VPR, FPCXT_NS |
| and FPCXT_S. |
| * testsuite/gas/arm/armv8_1-m-spec-reg.d: New. |
| * testsuite/gas/arm/armv8_1-m-spec-reg.s: New. |
| * testsuite/gas/arm/armv8_1-m-spec-reg-bad1.d: New. |
| * testsuite/gas/arm/armv8_1-m-spec-reg-bad2.d: New. |
| * testsuite/gas/arm/armv8_1-m-spec-reg-bad3.d: New. |
| * testsuite/gas/arm/armv8_1-m-spec-reg-bad1.l: New. |
| * testsuite/gas/arm/armv8_1-m-spec-reg-bad2.l: New. |
| * testsuite/gas/arm/armv8_1-m-spec-reg-bad3.l: New. |
| * testsuite/gas/arm/vfp1xD.d: Updated to allow new valid values. |
| * testsuite/gas/arm/vfp1xD_t2.d: Likewise. |
| |
| 2019-05-21 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-arm.c (TOGGLE_BIT): New. |
| (T16_32_TAB): New entries for cinc, cinv, cneg, csinc, |
| csinv, csneg, cset, csetm and csel. |
| (operand_parse_code): New OP_RR_ZR. |
| (parse_operand): Handle case for OP_RR_ZR. |
| (do_t_cond): New. |
| (insns): New instructions for cinc, cinv, cneg, csinc, |
| csinv, csneg, cset, csetm, csel. |
| * testsuite/gas/arm/armv8_1-m-cond-bad.d: New test. |
| * testsuite/gas/arm/armv8_1-m-cond-bad.l: New test. |
| * testsuite/gas/arm/armv8_1-m-cond-bad.s: New test. |
| * testsuite/gas/arm/armv8_1-m-cond.d: New test. |
| * testsuite/gas/arm/armv8_1-m-cond.s: New test. |
| |
| 2019-05-21 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-arm.c (operand_parse_code): New entries for |
| OP_RRnpcsp_I32 (register or integer operands). |
| (do_mve_scalar_shift): New. |
| (insns): New instructions for asrl, lsll, lsrl, sqrshrl, sqrshr, sqshl |
| sqshll, srshr, srshrl, uqrshll, uqrshl, uqshll, uqshl, urshrl and urshr. |
| * testsuite/gas/arm/mve-shift.d: New. |
| * testsuite/gas/arm/mve-shift.s: New. |
| * testsuite/gas/arm/mve-shift-bad.d: New. |
| * testsuite/gas/arm/mve-shift-bad.s: New. |
| * testsuite/gas/arm/mve-shift-bad.l: New. |
| |
| 2019-05-21 Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * testsuite/gas/mips/r6-branch-constraints.s: Rename to ... |
| * testsuite/gas/mips/r6-reg-constraints.s: this and add test |
| case for DAUI. |
| * testsuite/gas/mips/r6-branch-constraints.l: Rename to ... |
| * testsuite/gas/mips/r6-reg-constraints.l: this and add test |
| for DAUI. |
| * testsuite/gas/mips/mips.exp: Rename test from |
| r6-branch-constraints to r6-reg-constraints. |
| |
| 2019-05-21 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| PR 24559 |
| * config/tc-arm.c (move_or_literal_pool): Set size_req to 0 for MOVW |
| replacement. |
| * testsuite/gas/arm/load-pseudo.s: New test input. |
| * testsuite/gas/arm/m0-load-pseudo.d: New test. |
| * testsuite/gas/arm/m23-load-pseudo.d: New test. |
| * testsuite/gas/arm/m33-load-pseudo.d: New test. |
| |
| 2019-05-21 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * testsuite/gas/arm/armv8_1-m-bf.d: Allow different branch target naming |
| conventions. |
| * testsuite/gas/arm/armv8_1-m-bfl.d: Likewise. |
| * testsuite/gas/arm/armv8_1-m-bfcsel.d: Likewise. |
| * testsuite/gas/arm/armv8_1-m-loloop.d: Likewise. |
| * testsuite/gas/arm/armv8_1-m-bf-rel.d: Skip for vxworks. |
| * testsuite/gas/arm/armv8_1-m-bf-rela.d: New test. |
| * testsuite/gas/arm/armv8_1-m-bfl-rel.d: Skip for vxworks. |
| * testsuite/gas/arm/armv8_1-m-bfl-rela.d: New test. |
| |
| 2019-05-21 John Darrington <john@darrington.wattle.id.au> |
| |
| * expr.c (literal_prefix_dollar_hex): New variable. |
| (operand)[case '$']: Use the new variable instead of the old macro. |
| Also, move this instance of "case '$'" next to the other one, and |
| enable it only in the complementary proprocessor case. |
| * expr.h (literal_prefix_dollar_hex): Declare it. |
| * config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex. |
| * config/tc-ip2k.c: ditto |
| * config/tc-mt.c: ditto |
| * config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition. |
| * config/tc-ip2k.h: ditto |
| * config/tc-mt.h: ditto |
| |
| 2019-05-20 Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| PR 14798 |
| * config/tc-mips.c (s_mips_globl): Only treat symbols that are |
| not explicitly labelled as BSF_OBJECTs for IRIX targets. |
| * testsuite/gas/mips/pr14798.s: New test source. |
| * testsuite/gas/mips/pr14798-irix.d: New test. |
| * testsuite/gas/mips/pr14798.d: Likewise. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2019-05-17 John Darrington <john@darrington.wattle.id.au> |
| |
| * doc/c-arm.texi (ARM Options): Remove "(r)" and "(tm)" |
| * doc/c-bfin.texi (Blackfin Syntax): Remove "(r)" |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (check_simd_pred_availability): Refactor. |
| (do_neon_dyadic_i_su): Refactor use of check_simd_pred_availability. |
| (do_neon_dyadic_i64_su): Likewise. |
| (do_neon_shl): Likewise. |
| (do_neon_qshl): Likewise. |
| (do_neon_rshl): Likewise. |
| (do_neon_logic): Likewise. |
| (do_neon_dyadic_if_su): Likewise. |
| (do_neon_addsub_if_i): Likewise. |
| (do_neon_mac_maybe_scalar): Likewise. |
| (do_neon_fmac): Likewise. |
| (do_neon_mul): Likewise. |
| (do_neon_qdmulh): Likewise. |
| (do_neon_qrdmlah): Likewise. |
| (do_neon_abs_neg): Likewise. |
| (do_neon_sli): Likewise. |
| (do_neon_sri): Likewise. |
| (do_neon_qshlu_imm): Likewise. |
| (do_neon_cvt_1): Likewise. |
| (do_neon_cvttb_1): Likewise. |
| (do_neon_mvn): Likewise. |
| (do_neon_rev): Likewise. |
| (do_neon_dup): Likewise. |
| (do_neon_mov): Likewise. |
| (do_neon_rshift_round_imm): Likewise. |
| (do_neon_sat_abs_neg): Likewise. |
| (do_neon_cls): Likewise. |
| (do_neon_clz): Likewise. |
| (do_vmaxnm): Likewise. |
| (do_vrint_1): Likewise. |
| (do_vcmla): Likewise. |
| (do_vcadd): Likewise. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * NEWS: Mention Armv8.1-M Mainline and MVE. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * testsuite/gas/arm/mve-tailpredloop.d: New test. |
| * testsuite/gas/arm/mve-tailpredloop.s: New test. |
| * testsuite/gas/arm/mve-vabav.d: New test. |
| * testsuite/gas/arm/mve-vabav.s: New test. |
| * testsuite/gas/arm/mve-vabd.d: New test. |
| * testsuite/gas/arm/mve-vabd.s: New test. |
| * testsuite/gas/arm/mve-vabsneg.d: New test. |
| * testsuite/gas/arm/mve-vabsneg.s: New test. |
| * testsuite/gas/arm/mve-vadc.d: New test. |
| * testsuite/gas/arm/mve-vadc.s: New test. |
| * testsuite/gas/arm/mve-vaddlv.d: New test. |
| * testsuite/gas/arm/mve-vaddlv.s: New test. |
| * testsuite/gas/arm/mve-vaddsub.d: New test. |
| * testsuite/gas/arm/mve-vaddsub.s: New test. |
| * testsuite/gas/arm/mve-vaddv.d: New test. |
| * testsuite/gas/arm/mve-vaddv.s: New test. |
| * testsuite/gas/arm/mve-vand.d: New test. |
| * testsuite/gas/arm/mve-vand.s: New test. |
| * testsuite/gas/arm/mve-vbic.d: New test. |
| * testsuite/gas/arm/mve-vbic.s: New test. |
| * testsuite/gas/arm/mve-vbrsr.d: New test. |
| * testsuite/gas/arm/mve-vbrsr.s: New test. |
| * testsuite/gas/arm/mve-vcadd.d: New test. |
| * testsuite/gas/arm/mve-vcadd.s: New test. |
| * testsuite/gas/arm/mve-vcls.d: New test. |
| * testsuite/gas/arm/mve-vcls.s: New test. |
| * testsuite/gas/arm/mve-vclz.d: New test. |
| * testsuite/gas/arm/mve-vclz.s: New test. |
| * testsuite/gas/arm/mve-vcmla.d: New test. |
| * testsuite/gas/arm/mve-vcmla.s: New test. |
| * testsuite/gas/arm/mve-vcmp.d: New test. |
| * testsuite/gas/arm/mve-vcmp.s: New test. |
| * testsuite/gas/arm/mve-vcmul.d: New test. |
| * testsuite/gas/arm/mve-vcmul.s: New test. |
| * testsuite/gas/arm/mve-vcvt-1.d: New test. |
| * testsuite/gas/arm/mve-vcvt-1.s: New test. |
| * testsuite/gas/arm/mve-vcvt-2.d: New test. |
| * testsuite/gas/arm/mve-vcvt-2.s: New test. |
| * testsuite/gas/arm/mve-vcvt-3.d: New test. |
| * testsuite/gas/arm/mve-vcvt-3.s: New test. |
| * testsuite/gas/arm/mve-vcvt-4.d: New test. |
| * testsuite/gas/arm/mve-vcvt-4.s: New test. |
| * testsuite/gas/arm/mve-vddup.d: New test. |
| * testsuite/gas/arm/mve-vddup.s: New test. |
| * testsuite/gas/arm/mve-vdup.d: New test. |
| * testsuite/gas/arm/mve-vdup.s: New test. |
| * testsuite/gas/arm/mve-veor.d: New test. |
| * testsuite/gas/arm/mve-veor.s: New test. |
| * testsuite/gas/arm/mve-vfma-vfms.d: New test. |
| * testsuite/gas/arm/mve-vfma-vfms.s: New test. |
| * testsuite/gas/arm/mve-vfmas.d: New test. |
| * testsuite/gas/arm/mve-vfmas.s: New test. |
| * testsuite/gas/arm/mve-vhadd-vhsub-vrhadd.d: New test. |
| * testsuite/gas/arm/mve-vhadd-vhsub-vrhadd.s: New test. |
| * testsuite/gas/arm/mve-vhcadd.d: New test. |
| * testsuite/gas/arm/mve-vhcadd.s: New test. |
| * testsuite/gas/arm/mve-vmax-vmin.d: New test. |
| * testsuite/gas/arm/mve-vmax-vmin.s: New test. |
| * testsuite/gas/arm/mve-vmaxa-vmina.d: New test. |
| * testsuite/gas/arm/mve-vmaxa-vmina.s: New test. |
| * testsuite/gas/arm/mve-vmaxnm-vminnm.d: New test. |
| * testsuite/gas/arm/mve-vmaxnm-vminnm.s: New test. |
| * testsuite/gas/arm/mve-vmaxnma-vminnma.s: New test. |
| * testsuite/gas/arm/mve-vmaxnmv-vminnmv.d: New test. |
| * testsuite/gas/arm/mve-vmaxnmv-vminnmv.s: New test. |
| * testsuite/gas/arm/mve-vmaxv-vminv.d: New test. |
| * testsuite/gas/arm/mve-vmaxv-vminv.s: New test. |
| * testsuite/gas/arm/mve-vmla.d: New test. |
| * testsuite/gas/arm/mve-vmla.s: New test. |
| * testsuite/gas/arm/mve-vmladav.d: New test. |
| * testsuite/gas/arm/mve-vmladav.s: New test. |
| * testsuite/gas/arm/mve-vmlaldav.d: New test. |
| * testsuite/gas/arm/mve-vmlaldav.s: New test. |
| * testsuite/gas/arm/mve-vmlalv.d: New test. |
| * testsuite/gas/arm/mve-vmlalv.s: New test. |
| * testsuite/gas/arm/mve-vmlas.d: New test. |
| * testsuite/gas/arm/mve-vmlas.s: New test. |
| * testsuite/gas/arm/mve-vmlav.d: New test. |
| * testsuite/gas/arm/mve-vmlav.s: New test. |
| * testsuite/gas/arm/mve-vmlsdav.d: New test. |
| * testsuite/gas/arm/mve-vmlsdav.s: New test. |
| * testsuite/gas/arm/mve-vmlsldav.d: New test. |
| * testsuite/gas/arm/mve-vmlsldav.s: New test. |
| * testsuite/gas/arm/mve-vmov-1.d: New test. |
| * testsuite/gas/arm/mve-vmov-1.s: New test. |
| * testsuite/gas/arm/mve-vmov-2.d: New test. |
| * testsuite/gas/arm/mve-vmov-2.s: New test. |
| * testsuite/gas/arm/mve-vmul.d: New test. |
| * testsuite/gas/arm/mve-vmul.s: New test. |
| * testsuite/gas/arm/mve-vmulh.d: New test. |
| * testsuite/gas/arm/mve-vmulh.s: New test. |
| * testsuite/gas/arm/mve-vmullbt.d: New test. |
| * testsuite/gas/arm/mve-vmullbt.s: New test. |
| * testsuite/gas/arm/mve-vmvn.d: New test. |
| * testsuite/gas/arm/mve-vmvn.s: New test. |
| * testsuite/gas/arm/mve-vorn.d: New test. |
| * testsuite/gas/arm/mve-vorn.s: New test. |
| * testsuite/gas/arm/mve-vorr.d: New test. |
| * testsuite/gas/arm/mve-vorr.s: New test. |
| * testsuite/gas/arm/mve-vpnot.d: New test. |
| * testsuite/gas/arm/mve-vpnot.s: New test. |
| * testsuite/gas/arm/mve-vpsel.d: New test. |
| * testsuite/gas/arm/mve-vpsel.s: New test. |
| * testsuite/gas/arm/mve-vpt.d: New test. |
| * testsuite/gas/arm/mve-vpt.s: New test. |
| * testsuite/gas/arm/mve-vqabsneg.s: New test. |
| * testsuite/gas/arm/mve-vqaddsub.d: New test. |
| * testsuite/gas/arm/mve-vqaddsub.s: New test. |
| * testsuite/gas/arm/mve-vqdmladh.d: New test. |
| * testsuite/gas/arm/mve-vqdmladh.s: New test. |
| * testsuite/gas/arm/mve-vqdmlah.d: New test. |
| * testsuite/gas/arm/mve-vqdmlah.s: New test. |
| * testsuite/gas/arm/mve-vqdmlash.d: New test. |
| * testsuite/gas/arm/mve-vqdmlash.s: New test. |
| * testsuite/gas/arm/mve-vqdmlsdh.d: New test. |
| * testsuite/gas/arm/mve-vqdmlsdh.s: New test. |
| * testsuite/gas/arm/mve-vqdmulh.d: New test. |
| * testsuite/gas/arm/mve-vqdmulh.s: New test. |
| * testsuite/gas/arm/mve-vqdmull.d: New test. |
| * testsuite/gas/arm/mve-vqdmull.s: New test. |
| * testsuite/gas/arm/mve-vqmovn.d: New test. |
| * testsuite/gas/arm/mve-vqmovn.s: New test. |
| * testsuite/gas/arm/mve-vqrshl.d: New test. |
| * testsuite/gas/arm/mve-vqrshl.s: New test. |
| * testsuite/gas/arm/mve-vqrshrn.d: New test. |
| * testsuite/gas/arm/mve-vqrshrn.s: New test. |
| * testsuite/gas/arm/mve-vqshl.d: New test. |
| * testsuite/gas/arm/mve-vqshl.s: New test. |
| * testsuite/gas/arm/mve-vrev.d: New test. |
| * testsuite/gas/arm/mve-vrev.s: New test. |
| * testsuite/gas/arm/mve-vrint.d: New test. |
| * testsuite/gas/arm/mve-vrint.s: New test. |
| * testsuite/gas/arm/mve-vrmlaldavh.d: New test. |
| * testsuite/gas/arm/mve-vrmlaldavh.s: New test. |
| * testsuite/gas/arm/mve-vrshl.d: New test. |
| * testsuite/gas/arm/mve-vrshl.s: New test. |
| * testsuite/gas/arm/mve-vsbc.d: New test. |
| * testsuite/gas/arm/mve-vsbc.s: New test. |
| * testsuite/gas/arm/mve-vshl.d: New test. |
| * testsuite/gas/arm/mve-vshl.s: New test. |
| * testsuite/gas/arm/mve-vshlc.d: New test. |
| * testsuite/gas/arm/mve-vshlc.s: New test. |
| * testsuite/gas/arm/mve-vshll.d: New test. |
| * testsuite/gas/arm/mve-vshll.s: New test. |
| * testsuite/gas/arm/mve-vshr.d: New test. |
| * testsuite/gas/arm/mve-vshr.s: New test. |
| * testsuite/gas/arm/mve-vshrn.d: New test. |
| * testsuite/gas/arm/mve-vshrn.s: New test. |
| * testsuite/gas/arm/mve-vsli.d: New test. |
| * testsuite/gas/arm/mve-vsli.s: New test. |
| * testsuite/gas/arm/mve-vsri.d: New test. |
| * testsuite/gas/arm/mve-vsri.s: New test. |
| * testsuite/gas/arm/mve-vstld.d: New test. |
| * testsuite/gas/arm/mve-vstld.s: New test. |
| * testsuite/gas/arm/mve-vstrldr-1.d: New test. |
| * testsuite/gas/arm/mve-vstrldr-1.s: New test. |
| * testsuite/gas/arm/mve-vstrldr-2.d: New test. |
| * testsuite/gas/arm/mve-vstrldr-2.s: New test. |
| * testsuite/gas/arm/mve-vstrldr-3.d: New test. |
| * testsuite/gas/arm/mve-vstrldr-3.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (T16_32_TAB): Add new instructions. |
| (do_t_loloop): Changed to handle tail predication variants. |
| (md_apply_fix): Likewise. |
| (insns): Add entries for MVE mnemonics. |
| * testsuite/gas/arm/mve-tailpredloop-bad.d: New test. |
| * testsuite/gas/arm/mve-tailpredloop-bad.l: New test. |
| * testsuite/gas/arm/mve-tailpredloop-bad.s: New test. |
| * testsuite/gas/arm/mve-tailpredloop.d: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_mve_vshll): New encoding function. |
| (do_mve_vshlc): Likewise. |
| (insns): Add entries for MVE mnemonics. |
| * testsuite/gas/arm/mve-vshlc-bad.d: New test. |
| * testsuite/gas/arm/mve-vshlc-bad.l: New test. |
| * testsuite/gas/arm/mve-vshlc-bad.s: New test. |
| * testsuite/gas/arm/mve-vshll-bad.d: New test. |
| * testsuite/gas/arm/mve-vshll-bad.l: New test. |
| * testsuite/gas/arm/mve-vshll-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (enum operand_parse_code): Add new operand. |
| (parse_operands): Handle new operand. |
| (do_neon_shl_imm): Accept MVE variants. |
| (do_neon_shl): Likewise. |
| (do_neon_qshl_imm): Likewise. |
| (do_neon_qshl): Likewise. |
| (do_neon_qshlu_imm): Likewise. |
| (insns): Likewise. |
| * testsuite/gas/arm/mve-vqshl-bad.d: New test. |
| * testsuite/gas/arm/mve-vqshl-bad.l: New test. |
| * testsuite/gas/arm/mve-vqshl-bad.s: New test. |
| * testsuite/gas/arm/mve-vshl-bad.d: New test. |
| * testsuite/gas/arm/mve-vshl-bad.l: New test. |
| * testsuite/gas/arm/mve-vshl-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_neon_sli): Accept MVE variants. |
| (do_neon_sri): Likewise. |
| (do_neon_rev): Likewise. |
| (do_neon_rshift_round_imm): Likewise. |
| (insns): Likewise. |
| * testsuite/gas/arm/mve-vrev-bad.d: New test. |
| * testsuite/gas/arm/mve-vrev-bad.l: New test. |
| * testsuite/gas/arm/mve-vrev-bad.s: New test. |
| * testsuite/gas/arm/mve-vshr-bad.d: New test. |
| * testsuite/gas/arm/mve-vshr-bad.l: New test. |
| * testsuite/gas/arm/mve-vshr-bad.s: New test. |
| * testsuite/gas/arm/mve-vsli-bad.d: New test. |
| * testsuite/gas/arm/mve-vsli-bad.l: New test. |
| * testsuite/gas/arm/mve-vsli-bad.s: New test. |
| * testsuite/gas/arm/mve-vsri-bad.d: New test. |
| * testsuite/gas/arm/mve-vsri-bad.l: New test. |
| * testsuite/gas/arm/mve-vsri-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_vrint_1): Accept MVE variants. |
| (insns): Change entries to accept MVE variants. |
| * testsuite/gas/arm/mve-vrint-bad.d: New test. |
| * testsuite/gas/arm/mve-vrint-bad.l: New test. |
| * testsuite/gas/arm/mve-vrint-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (M_MNEM_vshrnt, M_MNEM_vshrnb, M_MNEM_vrshrnt, |
| M_MNEM_vqshrnt, M_MNEM_vqshrnb, M_MNEM_vqshrunt, M_MNEM_vqshrunb, |
| M_MNEM_vrshrnb, M_MNEM_vqrshrnt, M_MNEM_vqrshrnb, M_MNEM_vqrshrunt, |
| M_MNEM_vqrshrunb): New instruction encodings. |
| (do_mve_vshrn): New encoding function. |
| (insns): Add entries for MVE mnemonics. |
| * testsuite/gas/arm/mve-vqrshrn-bad.d: New test. |
| * testsuite/gas/arm/mve-vqrshrn-bad.l: New test. |
| * testsuite/gas/arm/mve-vqrshrn-bad.s: New test. |
| * testsuite/gas/arm/mve-vshrn-bad.d: New test. |
| * testsuite/gas/arm/mve-vshrn-bad.l: New test. |
| * testsuite/gas/arm/mve-vshrn-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (M_MNEM_vqmovnt, M_MNEM_vqmovnb, |
| M_MNEM_vqmovunt, M_MNEM_vqmovunb): New instruction encodings. |
| (do_mve_vqmovn): New encoding function. |
| (do_neon_rshl): Change to accepte MVE variants. |
| (insns): Change entries and add new for MVE mnemonics. |
| * testsuite/gas/arm/mve-vqmovn-bad.d: New test. |
| * testsuite/gas/arm/mve-vqmovn-bad.l: New test. |
| * testsuite/gas/arm/mve-vqmovn-bad.s: New test. |
| * testsuite/gas/arm/mve-vqrshl-bad.d: New test. |
| * testsuite/gas/arm/mve-vqrshl-bad.l: New test. |
| * testsuite/gas/arm/mve-vqrshl-bad.s: New test. |
| * testsuite/gas/arm/mve-vrshl-bad.d: New test. |
| * testsuite/gas/arm/mve-vrshl-bad.l: New test. |
| * testsuite/gas/arm/mve-vrshl-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (enum operand_parse_code): Add new operand. |
| (parse_operands): Handle new operand. |
| (do_mve_vqdmull): New encoding function. |
| (insns): Add entry for MVE mnemonics. |
| * testsuite/gas/arm/mve-vqdmull-bad.d: New test. |
| * testsuite/gas/arm/mve-vqdmull-bad.l: New test. |
| * testsuite/gas/arm/mve-vqdmull-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (enum operand_parse_code): Add new operand. |
| (parse_operands): Handle new operand. |
| (mve_encode_qqr): Handle new instructions. |
| (do_neon_qdmulh): Add support for MVE variants. |
| (do_neon_qrdmlah): Likewise. |
| (do_mve_vqdmlah): New encoding function. |
| (insns): Change entries and add new entries for MVE mnemonics. |
| * testsuite/gas/arm/mve-vqdmulh-bad.d: New test. |
| * testsuite/gas/arm/mve-vqdmulh-bad.l: New test. |
| * testsuite/gas/arm/mve-vqdmulh-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_mve_vqdmladh): New encoding function. |
| (insns): Add entries for MVE mnemonics. |
| * testsuite/gas/arm/mve-vqdmladh-bad.d: New test. |
| * testsuite/gas/arm/mve-vqdmladh-bad.l: New test. |
| * testsuite/gas/arm/mve-vqdmladh-bad.s: New test. |
| * testsuite/gas/arm/mve-vqdmlsdh-bad.d: New test. |
| * testsuite/gas/arm/mve-vqdmlsdh-bad.l: New test. |
| * testsuite/gas/arm/mve-vqdmlsdh-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_mve_vpsel): New encoding function. |
| (do_mve_vpnot): Likewise. |
| (insns): Add entries for MVE mnemonics. |
| * testsuite/gas/arm/mve-vpnot-bad.d: New test. |
| * testsuite/gas/arm/mve-vpnot-bad.l: New test. |
| * testsuite/gas/arm/mve-vpnot-bad.s: New test. |
| * testsuite/gas/arm/mve-vpsel-bad.d: New test. |
| * testsuite/gas/arm/mve-vpsel-bad.l: New test. |
| * testsuite/gas/arm/mve-vpsel-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_neon_mvn): Change to accept MVE variants. |
| (do_neon_sat_abs_neg): Likewise. |
| (insns): Likewise. |
| * testsuite/gas/arm/mve-vmvn-bad.d: New test. |
| * testsuite/gas/arm/mve-vmvn-bad.l: New test. |
| * testsuite/gas/arm/mve-vmvn-bad.s: New test. |
| * testsuite/gas/arm/mve-vqabsneg-bad.d: New test. |
| * testsuite/gas/arm/mve-vqabsneg-bad.l: New test. |
| * testsuite/gas/arm/mve-vqabsneg-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_mve_vmlas): New encoding function. |
| (do_mve_vmulh): Likewise. |
| (insns): Add entries for MVE mnemonics. |
| * testsuite/gas/arm/mve-vmlas-bad.d: New test. |
| * testsuite/gas/arm/mve-vmlas-bad.l: New test. |
| * testsuite/gas/arm/mve-vmlas-bad.s: New test. |
| * testsuite/gas/arm/mve-vmulh-bad.d: New test. |
| * testsuite/gas/arm/mve-vmulh-bad.l: New test. |
| * testsuite/gas/arm/mve-vmulh-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (enum operand_parse_code): New operand. |
| (parse_operands): Handle new operand. |
| (mve_encode_qqr): Handle new instructions. |
| (do_neon_dyadic_i64_su): Accept MVE variants. |
| (neon_dyadic_misc): Likewise. |
| (do_neon_mac_maybe_scalar): Likewise. |
| (do_neon_mul): Likewise. |
| (insns): Change to accept MVE variants. |
| * testsuite/gas/arm/mve-vmla-bad.d: New test. |
| * testsuite/gas/arm/mve-vmla-bad.l: New test. |
| * testsuite/gas/arm/mve-vmla-bad.s: New test. |
| * testsuite/gas/arm/mve-vmul-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vmul-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vmul-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vmul-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vmul-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vmul-bad-2.s: New test. |
| * testsuite/gas/arm/mve-vqaddsub-bad.d: New test. |
| * testsuite/gas/arm/mve-vqaddsub-bad.l: New test. |
| * testsuite/gas/arm/mve-vqaddsub-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (M_MNEM_vmlaldav, M_MNEM_vmlaldava, |
| M_MNEM_vmlaldavx, M_MNEM_vmlaldavax, M_MNEM_vmlsldav, |
| M_MNEM_vmlsldava, M_MNEM_vmlsldavx, M_MNEM_vmlsldavax, |
| M_MNEM_vrmlaldavhx, M_MNEM_vrmlaldavhax, M_MNEM_vrmlsldavh, |
| M_MNEM_vrmlsldavha, M_MNEM_vrmlsldavhx, M_MNEM_vrmlsldavhax): New |
| instruction encodings. |
| (NEON_SHAPE_DEF): New shape |
| (mve_encode_rrqq): New encoding helper function. |
| (do_mve_vmlaldav): New encoding function. |
| (do_mve_vrmlaldavh): New encoding function. |
| (insns): Add entries for MVE mnemonics. |
| * testsuite/gas/arm/mve-vmlaldav-bad.d: New test. |
| * testsuite/gas/arm/mve-vmlaldav-bad.l: New test. |
| * testsuite/gas/arm/mve-vmlaldav-bad.s: New test. |
| * testsuite/gas/arm/mve-vmlalv-bad.d: New test. |
| * testsuite/gas/arm/mve-vmlalv-bad.l: New test. |
| * testsuite/gas/arm/mve-vmlalv-bad.s: New test. |
| * testsuite/gas/arm/mve-vmlsldav-bad.d: New test. |
| * testsuite/gas/arm/mve-vmlsldav-bad.l: New test. |
| * testsuite/gas/arm/mve-vmlsldav-bad.s: New test. |
| * testsuite/gas/arm/mve-vrmlaldavh-bad.d: New test. |
| * testsuite/gas/arm/mve-vrmlaldavh-bad.l: New test. |
| * testsuite/gas/arm/mve-vrmlaldavh-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (M_MNEM_vmaxv, M_MNEM_vmaxav, M_MNEM_vminv, |
| M_MNEM_vminav): New instruction encodings. |
| (do_mve_vmaxv): New encoding function. |
| (insns): Add entries for new MVE mnemonics. |
| * testsuite/gas/arm/mve-vmaxv-vminv-bad.d: New test. |
| * testsuite/gas/arm/mve-vmaxv-vminv-bad.l: New test. |
| * testsuite/gas/arm/mve-vmaxv-vminv-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_mve_vmaxnmv): New encoding function. |
| (insns): Add entries for new mnemonics. |
| * testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.d: New test. |
| * testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.l: New test. |
| * testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_mve_vmaxa_vmina): New encoding function. |
| (do_mve_vmaxnma_vminnma): Likewise. |
| (do_neon_dyadic_if_su): Change to support MVE variants. |
| (do_vmaxnm): Likewise. |
| (insns): Change to accept MVE variants and add new. |
| * testsuite/gas/arm/mve-vmax-vmin-bad.d: New test. |
| * testsuite/gas/arm/mve-vmax-vmin-bad.l: New test. |
| * testsuite/gas/arm/mve-vmax-vmin-bad.s: New test. |
| * testsuite/gas/arm/mve-vmaxa-vmina-bad.d: New test. |
| * testsuite/gas/arm/mve-vmaxa-vmina-bad.l: New test. |
| * testsuite/gas/arm/mve-vmaxa-vmina-bad.s: New test. |
| * testsuite/gas/arm/mve-vmaxnm-vminnm-bad.d: New test. |
| * testsuite/gas/arm/mve-vmaxnm-vminnm-bad.l: New test. |
| * testsuite/gas/arm/mve-vmaxnm-vminnm-bad.s: New test. |
| * testsuite/gas/arm/mve-vmaxnma-vminnma-bad.d: New test. |
| * testsuite/gas/arm/mve-vmaxnma-vminnma-bad.l: New test. |
| * testsuite/gas/arm/mve-vmaxnma-vminnma-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (enum operand_parse_code): New operand. |
| (parse_operands): Handle new operand. |
| (mve_encode_qqr): Change to support new instructions. |
| (enum vfp_or_neon_is_neon_bits): Moved. |
| (vfp_or_neon_is_neon): Moved. |
| (check_simd_pred_availability): Moved. |
| (do_neon_dyadic_i_su): Changed to support MVE variants. |
| (neon_dyadic_misc): Changed mve_encode_qqr call. |
| (do_mve_vbrsr): Likewise. |
| (do_mve_vhcadd): New encoding function. |
| (insns): Change existing to accept MVE variants and add new. |
| * testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.d: New test. |
| * testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.l: New test. |
| * testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.s: New test. |
| * testsuite/gas/arm/mve-vhcadd-bad.d: New test. |
| * testsuite/gas/arm/mve-vhcadd-bad.l: New test. |
| * testsuite/gas/arm/mve-vhcadd-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_neon_fmac): Change to support MVE variants. |
| (insns): Change to accept MVE variants. |
| * testsuite/gas/arm/mve-vfma-vfms-bad.d: New test. |
| * testsuite/gas/arm/mve-vfma-vfms-bad.l: New test. |
| * testsuite/gas/arm/mve-vfma-vfms-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (M_MNEM_vddup, M_MNEM_vdwdup, M_MNEM_vidup, |
| M_MNEM_viwdup): New instruction encodings. |
| (NEON_SHAPE_DEF): New shapes. |
| (do_mve_viddup): New encoding function. |
| (do_neon_dup): Change to support new MVE variants. |
| (insns): Change existing to accept MVE variants and add new. |
| * testsuite/gas/arm/mve-vddup-bad.d: New test. |
| * testsuite/gas/arm/mve-vddup-bad.l: New test. |
| * testsuite/gas/arm/mve-vddup-bad.s: New test. |
| * testsuite/gas/arm/mve-vdup-bad.d: New test. |
| * testsuite/gas/arm/mve-vdup-bad.l: New test. |
| * testsuite/gas/arm/mve-vdup-bad.s: New test. |
| * testsuite/gas/arm/mve-vidup-bad.d: New test. |
| * testsuite/gas/arm/mve-vidup-bad.l: New test. |
| * testsuite/gas/arm/mve-vidup-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_mve_vfmas): New encoding function. |
| (do_neon_cls): Change to support MVE variants. |
| (do_neon_clz): Change to support MVE variants. |
| (insns): Change to support MVE variants and add new. |
| * testsuite/gas/arm/mve-vcls-bad.d: New test. |
| * testsuite/gas/arm/mve-vcls-bad.l: New test. |
| * testsuite/gas/arm/mve-vcls-bad.s: New test. |
| * testsuite/gas/arm/mve-vclz-bad.d: New test. |
| * testsuite/gas/arm/mve-vclz-bad.l: New test. |
| * testsuite/gas/arm/mve-vclz-bad.s: New test. |
| * testsuite/gas/arm/mve-vfmas-bad.d: New test. |
| * testsuite/gas/arm/mve-vfmas-bad.l: New test. |
| * testsuite/gas/arm/mve-vfmas-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (enum operand_parse_code): New operands. |
| (parse_operands): Handle new operands. |
| (do_mve_vcmul): New encoding function. |
| (do_vcmla): Change to support MVE variants. |
| (do_vcadd): Change to support MVE variants. |
| (insns): Change existing to support MVE variants and add new. |
| * testsuite/gas/arm/mve-vcadd-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vcadd-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vcadd-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vcadd-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vcadd-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vcadd-bad-2.s: New test. |
| * testsuite/gas/arm/mve-vcmla-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vcmla-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vcmla-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vcmla-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vcmla-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vcmla-bad-2.s: New test. |
| * testsuite/gas/arm/mve-vcmul-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vcmul-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vcmul-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vcmul-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vcmul-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vcmul-bad-2.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (enum operand_parse_code): New operands. |
| (parse_operands): Handle new operands. |
| (enum vfp_or_neon_is_neon_bits): Moved |
| (vfp_or_neon_is_neon): Moved |
| (check_simd_pred_availability): Moved. |
| (do_neon_logic): Change to accept MVE variants. |
| (insns): Changed to accept MVE variants. |
| * testsuite/gas/arm/mve-vand-bad.d: New test. |
| * testsuite/gas/arm/mve-vand-bad.l: New test. |
| * testsuite/gas/arm/mve-vand-bad.s: New test. |
| * testsuite/gas/arm/mve-vbic-bad.d: New test. |
| * testsuite/gas/arm/mve-vbic-bad.l: New test. |
| * testsuite/gas/arm/mve-vbic-bad.s: New test. |
| * testsuite/gas/arm/mve-veor-bad.d: New test. |
| * testsuite/gas/arm/mve-veor-bad.l: New test. |
| * testsuite/gas/arm/mve-veor-bad.s: New test. |
| * testsuite/gas/arm/mve-vorn-bad.d: New test. |
| * testsuite/gas/arm/mve-vorn-bad.l: New test. |
| * testsuite/gas/arm/mve-vorn-bad.s: New test. |
| * testsuite/gas/arm/mve-vorr-bad.d: New test. |
| * testsuite/gas/arm/mve-vorr-bad.l: New test. |
| * testsuite/gas/arm/mve-vorr-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (M_MNEM_vaddlv, M_MNEM_vaddlva, M_MNEM_vaddv, |
| M_MNEM_vaddva): New instruction encodings. |
| (mve_encode_rq): New encoding helper function. |
| (do_mve_vaddlv): New encoding function. |
| (do_mve_vaddv): New encoding function. |
| * testsuite/gas/arm/mve-vaddlv-bad.d: New test. |
| * testsuite/gas/arm/mve-vaddlv-bad.l: New test. |
| * testsuite/gas/arm/mve-vaddlv-bad.s: New test. |
| * testsuite/gas/arm/mve-vaddv-bad.d: New test. |
| * testsuite/gas/arm/mve-vaddv-bad.l: New test. |
| * testsuite/gas/arm/mve-vaddv-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (M_MNEM_vadc, M_MNEM_vadci, M_MNEM_vbrsr): |
| New instruction encodings. |
| (do_mve_vadc): New encoding instruction. |
| (do_mve_vbrsr): Likewise. |
| (do_mve_vsbc): Likewise. |
| * testsuite/gas/arm/mve-vadc-bad.d: New test. |
| * testsuite/gas/arm/mve-vadc-bad.l: New test. |
| * testsuite/gas/arm/mve-vadc-bad.s: New test. |
| * testsuite/gas/arm/mve-vbrsr-bad.d: New test. |
| * testsuite/gas/arm/mve-vbrsr-bad.l: New test. |
| * testsuite/gas/arm/mve-vbrsr-bad.s: New test. |
| * testsuite/gas/arm/mve-vsbc-bad.d: New test. |
| * testsuite/gas/arm/mve-vsbc-bad.l: New test. |
| * testsuite/gas/arm/mve-vsbc-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (MVE_BAD_QREG): New error message. |
| (enum operand_parse_code): Define new operand. |
| (parse_operands): Handle new operand. |
| (do_mve_vpt): Change for VPT blocks. |
| (NEON_SHAPE_DEF): New shape. |
| (neon_logbits): Moved. |
| (LOW4): Moved |
| (HI1): Moved |
| (mve_get_vcmp_vpt_cond): New function to translate vpt conditions. |
| (do_mve_vcmp): New encoding function. |
| (do_vfp_nsyn_cmp): Changed to support MVE variants. |
| (insns): Change to support MVE variants of vcmp and add vpt. |
| * testsuite/gas/arm/mve-vcmp-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vcmp-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vcmp-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vcmp-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vcmp-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vcmp-bad-2.s: New test. |
| * testsuite/gas/arm/mve-vpt-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vpt-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vpt-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vpt-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vpt-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vpt-bad-2.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (struct arm_it): Expand isscalar field to be able to |
| distinguish between types of scalar. |
| (parse_typed_reg_or_scalar): Change to accept MVE scalar variants. |
| (parse_scalar): Likewise. |
| (parse_neon_mov): Accept MVE variant. |
| (po_scalar_or_goto): Make use reg_type. |
| (parse_operands): Change uses of po_scalar_or_goto. |
| (do_vfp_sp_monadic): Change to accept MVE variants. |
| (do_vfp_reg_from_sp): Likewise. |
| (do_vfp_sp_from_reg): Likewise. |
| (do_vfp_dp_rd_rm): Likewise. |
| (do_vfp_dp_rd_rn_rm): Likewise. |
| (do_vfp_dp_rm_rd_rn): Likewise. |
| (M_MNEM_vmovlt, M_MNEM_vmovlb, M_MNEM_vmovnt, M_MNEM_vmovnb): New |
| instruction encodings. |
| (NEON_SHAPE_DEF): New shape. |
| (do_mve_mov): New encoding fuction. |
| (do_mve_movn): Likewise. |
| (do_mve_movl): Likewise. |
| (do_neon_mov): Change to accept MVE variants. |
| (mcCE): New MACRO. |
| (insns): Accept new MVE variants and instructions. |
| * testsuite/gas/arm/mve-vmov-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vmov-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vmov-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vmov-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vmov-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vmov-bad-2.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (enum operand_parse_code): Add new operand. |
| (parse_operands): Handle new operand. |
| (do_neon_cvt_1): Handle MVE variants. |
| (do_neon_cvttb_1): Likewise. |
| (insns): Accept MVE variants. |
| * testsuite/gas/arm/mve-vcvt-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-2.s: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-3.d: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-3.l: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-3.s: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-4.d: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-4.l: New test. |
| * testsuite/gas/arm/mve-vcvt-bad-4.s: New test. |
| * testsuite/gas/arm/mve-vcvt-bad.d: New test. |
| * testsuite/gas/arm/mve-vcvt-bad.l: New test. |
| * testsuite/gas/arm/mve-vcvt-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (struct arm_it): Make immisreg field larger to hold |
| type of register. |
| (enum shift_kind): Add SHIFT_UXTW shift kind. |
| (enum parse_shift_mode): Add SHIFT_UXTW_IMMEDIATE shift mode. |
| (parse_shift): Handle new shift type. |
| (parse_address_main): Accept new addressing modes. |
| (M_MNEM_vstrb, M_MNEM_vstrh, M_MNEM_vstrw, M_MNEM_vstrd, |
| M_MNEM_vldrb, M_MNEM_vldrh, M_MNEM_vldrw, M_MNEM_vldrd): New |
| instruction encodings. |
| (do_mve_vstr_vldr_QI): New encoding functions. |
| (do_mve_vstr_vldr_RQ): Likewise. |
| (do_mve_vstr_vldr_RI): Likewise. |
| (do_mve_vstr_vldr): Likewise. |
| * testsuite/gas/arm/mve-vldr-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vldr-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vldr-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vldr-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vldr-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vldr-bad-2.s: New test. |
| * testsuite/gas/arm/mve-vldr-bad-3.d: New test. |
| * testsuite/gas/arm/mve-vldr-bad-3.l: New test. |
| * testsuite/gas/arm/mve-vldr-bad-3.s: New test. |
| * testsuite/gas/arm/mve-vstr-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vstr-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vstr-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vstr-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vstr-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vstr-bad-2.s: New test. |
| * testsuite/gas/arm/mve-vstr-bad-3.d: New test. |
| * testsuite/gas/arm/mve-vstr-bad-3.l: New test. |
| * testsuite/gas/arm/mve-vstr-bad-3.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (enum it_instruction_type): Add MVE_UNPREDICABLE_INSN. |
| (BAD_EL_TYPE): New error message. |
| (parse_neon_el_struct_list): Adapt to be able to accept MVE variant. |
| (parse_address_main): Likewise. |
| (group_reloc_type): Add GROUP_MVE. |
| (enum operand_parse_code): Add new operands. |
| (parse_operands): Handle new operands. |
| (M_MNEM_vst20, M_MNEM_vst21, M_MNEM_vst40, M_MNEM_vst41, M_MNEM_vst42, |
| M_MNEM_vst43, M_MNEM_vld20, M_MNEM_vld21, M_MNEM_vld40, M_MNEM_vld41, |
| M_MNEM_vld42, M_MNEM_vld43): New encodings. |
| (do_mve_vst_vld): New encoding function. |
| (do_neon_ld_st_interleave): Use BAD_EL_TYPE. |
| (it_fsm_pre_encode): Handle new it_instruction_type |
| (handle_pred_state): Likewise. |
| * testsuite/gas/arm/mve-vstld-bad.d: New test. |
| * testsuite/gas/arm/mve-vstld-bad.l: New test. |
| * testsuite/gas/arm/mve-vstld-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (BAD_MVE_AUTO): New error message. |
| (BAD_MVE_SRCDEST): Likewise. |
| (mark_feature_used): Diagnose MVE only instructions when in |
| auto-detection mode or -march=all. |
| (enum operand_parse_code): Define new operand. |
| (parse_operands): Handle new operand. |
| (M_MNEM_vmullt, M_MNEM_vmullb): New encodings. |
| (mve_encode_qqq): New encoding helper function. |
| (do_mve_vmull): New encoding function. |
| (insns): Handle new instructions. |
| * testsuite/gas/arm/mve-vmullbt-bad.d: New test. |
| * testsuite/gas/arm/mve-vmullbt-bad.l: New test. |
| * testsuite/gas/arm/mve-vmullbt-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (struct asm_opcode): Make avalue a full int. |
| (BAD_ODD, BAD_EVEN, BAD_SIMD_TYPE): New errors. |
| (enum operand_parse_code): Handle new operands. |
| (parse_operands): Likewise. |
| (M_MNEM_vabav, M_MNEM_vmladav, M_MNEM_vmladava, M_MNEM_vmladavx, |
| M_MNEM_vmladavax, M_MNEM_vmlsdav, M_MNEM_vmlsdava, M_MNEM_vmlsdavx, |
| M_MNEM_vmlsdavax): Define new encodings. |
| (NEON_SHAPE_DEF): Add new shape. |
| (neon_check_type): Use BAD_SIMD_TYPE. |
| (mve_encode_rqq): New encoding helper function. |
| (do_mve_vabav, do_mve_vmladav): New encoding functions. |
| (mCEF): New MACRO. |
| * testsuite/gas/arm/mve-vabav-bad.d: New test. |
| * testsuite/gas/arm/mve-vabav-bad.l: New test. |
| * testsuite/gas/arm/mve-vabav-bad.s: New test. |
| * testsuite/gas/arm/mve-vmladav-bad.d: New test. |
| * testsuite/gas/arm/mve-vmladav-bad.l: New test. |
| * testsuite/gas/arm/mve-vmladav-bad.s: New test. |
| * testsuite/gas/arm/mve-vmlav-bad.d: New test. |
| * testsuite/gas/arm/mve-vmlav-bad.l: New test. |
| * testsuite/gas/arm/mve-vmlav-bad.s: New test. |
| * testsuite/gas/arm/mve-vmlsdav-bad.d: New test. |
| * testsuite/gas/arm/mve-vmlsdav-bad.l: New test. |
| * testsuite/gas/arm/mve-vmlsdav-bad.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_neon_abs_neg): Make it accept MVE variant. |
| (insns): Change vabs and vneg entries to accept MVE variants. |
| * testsuite/gas/arm/mve-vabsneg-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vabsneg-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vabsneg-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vabsneg-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vabsneg-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vabsneg-bad-2.s: New test. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (enum it_instruction_type): Rename to... |
| (enum pred_instruction_type): ... this. Include VPT types. |
| (it_insn_type): Rename to ... |
| (pred_insn_type): .. this. |
| (arm_it): Change comment. |
| (enum arm_reg_type): Add new value. |
| (reg_expected_msgs): New entry. |
| (asm_opcode): Add mayBeVecPred member. |
| (BAD_SYNTAX, BAD_NOT_VPT, BAD_OUT_VPT, BAD_VPT_COND, MVE_NOT_IT, |
| MVE_NOT_VPT, MVE_BAD_PC, MVE_BAD_SP): New diagnostic MACROS. |
| (arm_vcond_hsh): New table for vector condition codes. |
| (now_it): Rename to ... |
| (now_pred): ... this. |
| (now_it_compatible): Rename to ... |
| (now_pred_compatible): ... this. |
| (in_it_block): Rename to ... |
| (in_pred_block): ... this. |
| (handle_it_state): Rename to ... |
| (handle_pred_state): ... this. And change it to accept VPT blocks. |
| (set_it_insn_type): Rename to ... |
| (set_pred_insn_type): ... this. |
| (set_it_insn_type_nonvoid): Rename to ... |
| (set_pred_insn_type_nonvoid): ... this. |
| (set_it_insn_type_last): Rename to ... |
| (set_pred_insn_type_last): ... this. |
| (record_feature_use): Moved. |
| (mark_feature_used): Likewise. |
| (parse_typed_reg_or_scalar): Add new case for REG_TYPE_MQ. |
| (emit_insn): Use renamed functions and variables. |
| (enum operand_parse_code): Add new operands. |
| (parse_operands): Handle new operands. |
| (do_scalar_fp16_v82_encode): Change predication detection. |
| (do_it): Use renamed functions and variables. |
| (do_t_add_sub): Likewise. |
| (do_t_arit3): Likewise. |
| (do_t_arit3c): Likewise. |
| (do_t_blx): Likewise. |
| (do_t_branch): Likewise. |
| (do_t_bkpt_hlt1): Likewise. |
| (do_t_branch23): Likewise. |
| (do_t_bx): Likewise. |
| (do_t_bxj): Likewise. |
| (do_t_cond): Likewise. |
| (do_t_csdb): Likewise. |
| (do_t_cps): Likewise. |
| (do_t_cpsi): Likewise. |
| (do_t_cbz): Likewise. |
| (do_t_it): Likewise. |
| (do_mve_vpt): New function to handle VPT blocks. |
| (encode_thumb2_multi): Use renamed functions and variables. |
| (do_t_ldst): Use renamed functions and variables. |
| (do_t_mov_cmp): Likewise. |
| (do_t_mvn_tst): Likewise. |
| (do_t_mul): Likewise. |
| (do_t_nop): Likewise. |
| (do_t_neg): Likewise. |
| (do_t_rsb): Likewise. |
| (do_t_setend): Likewise. |
| (do_t_shift): Likewise. |
| (do_t_smc): Likewise. |
| (do_t_tb): Likewise. |
| (do_t_udf): Likewise. |
| (do_t_loloop): Likewise. |
| (do_neon_cvt_1): Likewise. |
| (do_vfp_nsyn_cvt_fpv8): Likewise. |
| (do_vsel): Likewise. |
| (do_vmaxnm): Likewise. |
| (do_vrint_1): Likewise. |
| (do_crypto_2op_1): Likewise. |
| (do_crypto_3op_1): Likewise. |
| (do_crc32_1): Likewise. |
| (it_fsm_pre_encode): Likewise. |
| (it_fsm_post_encode): Likewise. |
| (force_automatic_it_block_close): Likewise. |
| (check_it_blocks_finished): Likewise. |
| (check_pred_blocks_finished): Likewise. |
| (arm_cleanup): Likewise. |
| (now_it_add_mask): Rename to ... |
| (now_pred_add_mask): ... this. And use new variables and functions. |
| (NEON_ENC_TAB): Add entries for vabdl, vaddl and vsubl. |
| (N_I_MVE, N_F_MVE, N_SU_MVE): New MACROs. |
| (neon_check_type): Generalize error message. |
| (mve_encode_qqr): New MVE generic encoding function. |
| (neon_dyadic_misc): Change to accept MVE variants. |
| (do_neon_dyadic_if_su): Likewise. |
| (do_neon_addsub_if_i): Likewise. |
| (do_neon_dyadic_long): Likewise. |
| (vfp_or_neon_is_neon): Add extra checks. |
| (check_simd_pred_availability): Helper function to check SIMD |
| instruction availability with respect to predication. |
| (enum opcode_tag): New suffix value. |
| (opcode_lookup): Change to handle VPT blocks. |
| (new_automatic_it_block): Rename to ... |
| (close_automatic_it_block): ...this. |
| (TxCE, TxC3, TxC3w, TUE, TUEc, TUF, CE, C3, ToC, ToU, |
| toC, toU, CL, cCE, cCL, C3E, xCM_, UE, UF, NUF, nUF, |
| NCE_tag, NCE, NCEF, nCE_tag, nCE, nCEF): Add default value for new |
| field. |
| (mCEF, mnCEF, mnCE, MNUF, mnUF, mToC, MNCE, MNCEF): New MACROs. |
| (insns): Redefine vadd, vsub, cabd, vabdl, vaddl, vsubl to accept MVE |
| variants. Add entries for vscclrm, and vpst. |
| (md_begin): Add arm_vcond_hsh initialization. |
| * config/tc-arm.h (enum it_state): Rename to... |
| (enum pred_state): ...this. |
| (struct current_it): Rename to... |
| (struct current_pred): ...this. |
| (enum pred_type): New enum. |
| (struct arm_segment_info_type): Use current_pred. |
| * testsuite/gas/arm/armv8_3-a-fp-bad.l: Update error message. |
| * testsuite/gas/arm/armv8_3-a-simd-bad.l: Update error message. |
| * testsuite/gas/arm/dotprod-illegal.l: Update error message. |
| * testsuite/gas/arm/mve-vaddsubabd-bad-1.d: New test. |
| * testsuite/gas/arm/mve-vaddsubabd-bad-1.l: New test. |
| * testsuite/gas/arm/mve-vaddsubabd-bad-1.s: New test. |
| * testsuite/gas/arm/mve-vaddsubabd-bad-2.d: New test. |
| * testsuite/gas/arm/mve-vaddsubabd-bad-2.l: New test. |
| * testsuite/gas/arm/mve-vaddsubabd-bad-2.s: New test. |
| * testsuite/gas/arm/mve-vpst-bad.d: New test. |
| * testsuite/gas/arm/mve-vpst-bad.l: New test. |
| * testsuite/gas/arm/mve-vpst-bad.s: New test. |
| * testsuite/gas/arm/neon-ldst-es-bad.l: Updated error message. |
| |
| 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (mve_ext, mve_fp_ext): New features. |
| (armv8_1m_main_ext_table): Add new extensions. |
| (aeabi_set_public_attributes): Translate new features to new build attributes. |
| (arm_convert_symbolic_attribute): Add Tag_MVE_arch. |
| * doc/c-arm.texi: Document new extensions and new build attribute. |
| |
| 2019-05-15 John Darrington <john@darrington.wattle.id.au> |
| |
| * config/tc-s12z.c (register_prefix): New variable. (md_show_usage, |
| md_parse_option): parse the new option. |
| (lex_reg_name): Scan the prefix if one is set. |
| * doc/c-s12z.texi (S12Z-Opts): Document the new option. |
| * testsuite/gas/s12z/reg-prefix.d: New file. |
| * testsuite/gas/s12z/reg-prefix.s: New file. |
| * testsuite/gas/s12z/s12z.exp: Add them. |
| |
| 2019-05-14 John Darrington <john@darrington.wattle.id.au> |
| |
| * doc/as.texi (Machine Dependencies): Fix misaligned menu entry. |
| |
| 2019-05-15 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-csky.c (md_convert_frag): Initialise trailing |
| padding for COND_JUMP_PIC. |
| |
| 2019-05-15 Alan Modra <amodra@gmail.com> |
| |
| * dwarf2dbg.c: Whitespace fixes. |
| (get_filenum): Don't strdup "file". Adjust error message. |
| (dwarf2_directive_filename): Use an unsigned type for "num". |
| Catch truncation of file number and overflow of get_filenum |
| XRESIZEVEC multiplication. Delete dead code. |
| |
| 2019-05-15 Alan Modra <amodra@gmail.com> |
| |
| PR 24538 |
| * config/tc-tic54x.c (tic54x_start_line_hook): Do skip end of line |
| chars in setting endp. |
| |
| 2019-05-14 Nick Clifton <nickc@redhat.com> |
| |
| PR 24538 |
| * config/tc-i386-intel.c (i386_intel_simplify_register): Reject |
| illegal register numbers. |
| |
| 2019-05-10 Nick Clifton <nickc@redhat.com> |
| |
| PR 24538 |
| * macro.c (get_any_string): Increase size of buffer used to hold |
| decimal value of expression result. |
| * dw2gencfi.c (get_debugseg_name): Handle an empty name. |
| * dwarf2dbg.c (get_filenum): Catch integer wraparound when |
| extending allocate file array. |
| (dwarf2_directive_filename): Add extra checks of the computed file |
| number. |
| * config/tc-arm.c (arm_tc_equal_in_insn): Insert copy of name into |
| warning hash table. |
| (s_arm_eabi_attribute): Check for obj_elf_vendor_attribute |
| returning -1. |
| * config/tc-i386.c (i386_output_nops): Catch an attempt to |
| generate nops of negative lengths. |
| * as.h (MAX_LITTLENUMS): Move definition to here from... |
| * config/atof-ieee.c: ...here. |
| * config/tc-aarch64.c: ...here. |
| * config/tc-arc.c: ...here. |
| * config/tc-arm.c: ...here. |
| * config/tc-epiphany.c: ...here. |
| * config/tc-i386.c: ...here. |
| * config/tc-ia64.c: ...here. (And correct the value). |
| * config/tc-m32c.c: ...here. |
| * config/tc-m32r.c: ...here. |
| * config/tc-metag.c: ...here. |
| * config/tc-microblaze.c: ...here. |
| * config/tc-nds32.c: ...here. |
| * config/tc-or1k.c: ...here. |
| * config/tc-score.c: ...here. |
| * config/tc-score7.c: ...here. |
| * config/tc-tic4x.c: ...here. |
| * config/tc-tilegx.c: ...here. |
| * config/tc-tilepro.c: ...here. |
| * config/tc-visium.c: ...here. |
| * config/tc-sh.c (md_assemble): Add check for an instruction with |
| no opcodes. |
| * config/tc-mips.c (mips_lookup_insn): Add check for very short |
| instruction name. |
| * config/tc-tic54x.c: Use unsigned chars to access is_end_of_line |
| array. |
| (tic54x_start_line_hook): Check for an empty line. |
| (next_line_shows_parallel): Do not walk off the end of the string. |
| (tic54x_macro_start): Check for too much macro nesting. |
| (tic54x_start_label): Add label_start parameter. Use this |
| parameter to check the first character of the label. |
| |
| * config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Pass |
| line_start variable to tic54x_start_label. |
| |
| 2019-05-10 Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * config/tc-mips.c (macro) <M_ADD_I, M_SUB_I, M_DADD_I, M_DSUB_I>: |
| Add expansions for MIPS r6. |
| * testsuite/gas/mips/add.s: Enable tests for R6. |
| * testsuite/gas/mips/daddi.s: Annotate to test DADD for R6. |
| * testsuite/gas/mips/mipsr6@add.d: Likewise. |
| * gas/testsuite/gas/mips/mipsr6@dadd.d: New test. |
| * gas/testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * testsuite/gas/aarch64/sve2.d: Remove file format restriction. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * testsuite/gas/aarch64/illegal-sve2-aes.d: New test. |
| * testsuite/gas/aarch64/illegal-sve2-bitperm.d: New test. |
| * testsuite/gas/aarch64/illegal-sve2-sha3.d: Test new instructions. |
| * testsuite/gas/aarch64/illegal-sve2-sm4.d: Test new instructions. |
| * testsuite/gas/aarch64/illegal-sve2-sve1ext.d: Test new instructions. |
| * testsuite/gas/aarch64/illegal-sve2-sve1ext.l: Test new instructions. |
| * testsuite/gas/aarch64/illegal-sve2.d: Test new instructions. |
| * testsuite/gas/aarch64/illegal-sve2.l: Test new instructions. |
| * testsuite/gas/aarch64/illegal-sve2.s: Test new instructions. |
| * testsuite/gas/aarch64/sve1-extended-sve2.s: New test. |
| * testsuite/gas/aarch64/sve2.d: Test new instructions. |
| * testsuite/gas/aarch64/sve2.s: Test new instructions. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Handle new SVE_SHLIMM_UNPRED_22 |
| operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX |
| operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Handle new SVE_SHRIMM_UNPRED_22 |
| operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * config/tc-aarch64.c (REG_ZR): Macro specifying zero register. |
| (parse_address_main): Account for new addressing mode [Zn.S, Xm]. |
| (parse_operands): Handle new SVE_ADDR_ZX operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Handle new SVE_Zm3_11_INDEX |
| operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Handle new SVE_IMM_ROT3 operand. |
| |
| 2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com> |
| |
| * config/tc-aarch64.c: Add command line architecture feature flags |
| "sve2", "sve2-sm4", "sve2-aes", "sve2-sha3", "bitperm". |
| * doc/c-aarch64.texi: Document new architecture feature flags. |
| |
| 2019-05-08 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/elf/dwarf2-1.s, |
| * testsuite/gas/elf/dwarf2-2.s, |
| * testsuite/gas/elf/dwarf2-5.s, |
| * testsuite/gas/elf/dwarf2-7.s, |
| * testsuite/gas/elf/dwarf2-8.s, |
| * testsuite/gas/elf/dwarf2-9.s, |
| * testsuite/gas/elf/dwarf2-10.s, |
| * testsuite/gas/elf/dwarf2-11.s, |
| * testsuite/gas/elf/dwarf2-12.s, |
| * testsuite/gas/elf/dwarf2-13.s, |
| * testsuite/gas/elf/dwarf2-14.s, |
| * testsuite/gas/elf/dwarf2-15.s, |
| * testsuite/gas/elf/dwarf2-16.s, |
| * testsuite/gas/elf/dwarf2-17.s, |
| * testsuite/gas/elf/dwarf2-18.s, |
| * testsuite/gas/elf/dwarf2-19.s: Double size of align and simulated |
| instructions. |
| * testsuite/gas/elf/dwarf2-1.d, |
| * testsuite/gas/elf/dwarf2-2.d, |
| * testsuite/gas/elf/dwarf2-5.d, |
| * testsuite/gas/elf/dwarf2-7.d, |
| * testsuite/gas/elf/dwarf2-8.d, |
| * testsuite/gas/elf/dwarf2-9.d, |
| * testsuite/gas/elf/dwarf2-10.d, |
| * testsuite/gas/elf/dwarf2-11.d, |
| * testsuite/gas/elf/dwarf2-12.d, |
| * testsuite/gas/elf/dwarf2-13.d, |
| * testsuite/gas/elf/dwarf2-14.d, |
| * testsuite/gas/elf/dwarf2-15.d, |
| * testsuite/gas/elf/dwarf2-16.d, |
| * testsuite/gas/elf/dwarf2-17.d, |
| * testsuite/gas/elf/dwarf2-18.d, |
| * testsuite/gas/elf/dwarf2-19.d: Use xfail rather than notarget. |
| Remove avr, pru, tile, xtensa from xfails. Update expected output. |
| * testsuite/gas/elf/elf.exp: Sort targets. |
| (dump_opts): Pass {as -mno-relax} for riscv, {as -mno-link-relax} |
| for avr and pru, and {as --no-link-relax} for xtensa to dwarf tests. |
| * testsuite/gas/elf/section2.e-miwmmxt: Delete unused file. |
| |
| 2019-05-08 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-xtensa.c (opt_linkrelax): New variable. |
| (md_parse_option): Set it here. |
| (md_begin): Copy opt_linkrelax to linkrelax. |
| |
| 2019-05-07 Alexandre Oliva <aoliva@redhat.com> |
| |
| * testsuite/gas/elf/dwarf2-18.d: Xfail mep-*. |
| * testsuite/gas/elf/dwarf2-19.d: Likewise. |
| |
| 2019-05-07 Alan Modra <amodra@gmail.com> |
| |
| * symbols.c (use_complex_relocs_for): Formatting. Factor out |
| X_add_symbol tests. |
| |
| 2019-05-06 Andrew Bennett <andrew.bennett@imgtec.com> |
| Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * config/tc-mips.c (mips_set_ase): Handle ASE_EVA_R6. |
| (macro) <M_LLWPE_AB, M_SCWPE_AB>: New cases. |
| (mips_after_parse_args): Translate EVA to EVA_R6. |
| * testsuite/gas/mips/ase-errors-1.s: Add new instructions. |
| * testsuite/gas/mips/eva.s: Likewise. |
| * testsuite/gas/mips/ase-errors-1.l: Check errors for |
| new instructions. |
| * testsuite/gas/mips/mipsr6@eva.d: Check new test cases. |
| |
| 2019-05-06 Alan Modra <amodra@gmail.com> |
| |
| * symbols.c (symbol_relc_make_sym): Do not access sym->sy_value |
| directly. |
| |
| 2019-05-06 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-ppc.c (ppc_fix_adjustable): Exclude all GOT and PLT |
| relocs, and VLE sdarel relocs. |
| * testsuite/gas/ppc/power4.d: Adjust. |
| |
| 2019-05-05 Alexandre Oliva <aoliva@redhat.com> |
| |
| * dwarf2dbg.c (set_or_check_view): Skip heads when assigning |
| views of prior locs. |
| (dwarf2_gen_line_info_1): Skip heads. |
| (size_inc_line_addr, emit_inc_line_addr): Drop |
| DW_LNS_advance_pc for zero addr delta. |
| (dwarf2_finish): Assign views for heads of segments. |
| * testsuite/gas/elf/dwarf2-19.d: New. |
| * testsuite/gas/elf/dwarf2-19.s: New. |
| * testsuite/gas/elf/elf.exp: Test it. |
| |
| 2019-05-04 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-m32c.c (insn_size): Delete static var. |
| (md_begin): Don't set it. |
| (m32c_md_end): Delete. |
| (md_assemble): Add insn_size auto var. |
| * config/tc-m32c.h (md_end): Don't define. |
| (m32c_md_end): Delete. |
| (NOP_OPCODE, HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): Define. |
| * testsuite/gas/all/align.d: Remove m32c from notarget list. |
| * testsuite/gas/all/incbin.d: Likewise. |
| * testsuite/gas/elf/dwarf2-11.d: Likewise. |
| * testsuite/gas/macros/semi.d: Likewise. |
| * testsuite/gas/all/gas.exp (do_comment): Similarly. |
| |
| 2019-05-02 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/24485 |
| * config/tc-i386.c (process_suffix): Issue a warning to IRET |
| without a suffix for .code16gcc. |
| * testsuite/gas/i386/jump16.s: Add tests for iretX. |
| * testsuite/gas/i386/jump16.d: Updated. |
| * testsuite/gas/i386/jump16.e: New file. |
| |
| 2019-05-01 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-aarch64.c (parse_operands): Add case for |
| AARCH64_OPND_TME_UIMM16. |
| (aarch64_features): Add "tme". |
| * doc/c-aarch64.texi: Document the same. |
| * testsuite/gas/aarch64/tme-invalid.d: New test. |
| * testsuite/gas/aarch64/tme-invalid.l: New test. |
| * testsuite/gas/aarch64/tme-invalid.s: New test. |
| * testsuite/gas/aarch64/tme.d: New test. |
| * testsuite/gas/aarch64/tme.s: New test. |
| |
| 2019-04-29 John Darrington <john@darrington.wattle.id.au> |
| |
| * testsuite/gas/s12z/truncated.d: New file. |
| * testsuite/gas/s12z/truncated.s: New file. |
| * testsuite/gas/s12z/s12z.exp: Add new test. |
| |
| 2019-04-26 Andrew Bennett <andrew.bennett@imgtec.com> |
| Faraz Shahbazker <fshahbazker@wavecomp.com> |
| |
| * config/tc-mips.c (macro) <M_LLWP_AB, M_LLDP_AB, M_SCWP_AB, |
| M_SCDP_AB>: New cases and expansions for paired instructions. |
| * testsuite/gas/mips/llpscp-32.s: New test source. |
| * testsuite/gas/mips/llpscp-64.s: Likewise. |
| * testsuite/gas/mips/llpscp-32.d: New test. |
| * testsuite/gas/mips/llpscp-64.d: Likewise. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| * testsuite/gas/mips/r6.s: Add new instructions to test source. |
| * testsuite/gas/mips/r6-64.s: Likewise. |
| * testsuite/gas/mips/r6-64-n32.d: Check new instructions. |
| * testsuite/gas/mips/r6-64-n64.d: Likewise. |
| * testsuite/gas/mips/r6-n32.d: Likewise. |
| * testsuite/gas/mips/r6-n64.d: Likwwise. |
| * testsuite/gas/mips/r6.d: Likewise. |
| |
| 2019-04-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/24485 |
| * config/tc-i386.c (process_suffix): Don't add DATA_PREFIX_OPCODE |
| to IRET for .code16gcc. |
| * testsuite/gas/i386/jump16.s: Add IRET tests. |
| * testsuite/gas/i386/jump16.d: Updated. |
| |
| 2019-04-25 Alexandre Oliva <aoliva@redhat.com> |
| Alan Modra <amodra@gmail.com> |
| |
| PR gas/24444 |
| * frags.c (frag_gtoffset_p): New. |
| * frags.h (frag_gtoffset_p): Declare it. |
| * expr.c (resolve_expression): Use it. |
| |
| 2019-04-24 Alan Modra <amodra@gmail.com> |
| |
| PR 24444 |
| * symbols.c (resolve_symbol_value): When handling symbols |
| marked as sy_flags.resolved, return correct value for the |
| case of expression symbols left as an O_symbol expression. |
| Merge O_symbol code handling undefined and common symbols with |
| code handling special cases of expression symbols. Use |
| seg_left to test for undefined and common symbols. Don't |
| leave an O_symbol expression when X_add_symbol resolves to |
| the absolute_section. Init final_val later. |
| * testsuite/gas/mmix/basep-7.d: Adjust expected output. |
| |
| 2019-04-24 John Darrington <john@darrington.wattle.id.au> |
| |
| * testsuite/gas/s12z/bit-manip-invalid.s: Extend test for BSET |
| and BCLR instructions with an invalid mode. |
| * testsuite/gas/s12z/bit-manip-invalid.d: ditto. |
| |
| 2019-04-19 Nick Clifton <nickc@redhat.com> |
| |
| PR 24464 |
| * config/tc-rx.h (md_relax_frag): Pass the max_iterations variable |
| to the relaxation function. |
| * config/tc-rx.c (rx_relax_frag): Add new parameter - the maximum |
| number of iterations. Make sure that our internal iteration limit |
| does not exceed this external iteration limit. |
| |
| 2019-04-18 Matthew Fortune <matthew.fortune@mips.com> |
| |
| * config/tc-mips.c (match_non_zero_reg_operand): Update |
| warning message. |
| * testsuite/gas/mips/r6-branch-constraints.l: Likewise. |
| |
| 2019-04-18 Jozef Lawrynowicz <jozef.l@mittosystems.com> |
| |
| * config/tc-msp430.c (msp430_make_init_symbols): Define |
| __crt0_run_{preinit,init,fini}_array symbols if |
| .{preinit,init,fini}_array sections exist. |
| * testsuite/gas/msp430/fini-array.d: New test. |
| * testsuite/gas/msp430/init-array.d: New test. |
| * testsuite/gas/msp430/preinit-array.d: New test. |
| * testsuite/gas/msp430/fini-array.s: New test source. |
| * testsuite/gas/msp430/init-array.s: New test source. |
| * testsuite/gas/msp430/preinit-array.s: New test source. |
| * testsuite/gas/msp430/msp430.exp: Add new tests to driver. |
| |
| 2019-04-17 Jozef Lawrynowicz <jozef.l@mittosystems.com> |
| |
| * config/tc-msp430.c (msp430_make_init_symbols): Define __crt0_init_bss |
| symbol when .lower.bss or .either.bss sections exist. |
| Define __crt0_movedata when .lower.data or .either.data sections exist. |
| * testsuite/gas/msp430/either-data-bss-sym.d: New test. |
| * testsuite/gas/msp430/low-data-bss-sym.d: New test. |
| * testsuite/gas/msp430/either-data-bss-sym.s: New test source. |
| * testsuite/gas/msp430/low-data-bss-sym.s: New test source. |
| * testsuite/gas/msp430/msp430.exp: Run new tests. |
| Enable large code model when running -mdata-region={upper,either} |
| tests. |
| |
| 2019-04-17 Jozef Lawrynowicz <jozef.l@mittosystems.com> |
| |
| * config/tc-msp430.c (options): New OPTION_UNKNOWN_INTR_NOPS, |
| OPTION_NO_UNKNOWN_INTR_NOPS and do_unknown_interrupt_nops. |
| (md_parse_option): Handle OPTION_UNKNOWN_INTR_NOPS and |
| OPTION_NO_UNKNOWN_INTR_NOPS by setting do_unknown_interrupt_nops |
| accordingly. |
| (md_show_usage): Likewise. |
| (md_shortopts): Add "mu" for OPTION_UNKNOWN_INTR_NOPS and |
| "mU" for OPTION_NO_UNKNOWN_INTR_NOPS. |
| (md_longopts): Likewise. |
| (warn_eint_nop): Update comment. |
| (warn_unsure_interrupt): Don't warn if prev_insn_is_nop or |
| prev_insn_is_dint or we are assembling for 430 ISA. |
| (msp430_operands): Only call warn_unsure_interrupt if |
| do_unknown_interrupt_nops == TRUE. |
| * testsuite/gas/msp430/nop-unknown-intr.s: New test source file. |
| * testsuite/gas/msp430/nop-unknown-intr-430.d: New test. |
| * testsuite/gas/msp430/nop-unknown-intr-430x.d: New test. |
| * testsuite/gas/msp430/nop-unknown-intr-430x-ignore.d: New test. |
| * testsuite/gas/msp430/nop-unknown-intr-430.l: Warning output for new |
| test. |
| * testsuite/gas/msp430/nop-unknown-intr-430x.l: Likewise. |
| * testsuite/gas/msp430/msp430.exp: Add new tests to driver. |
| |
| 2019-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/all/weakref1.d: xfail nds32. |
| |
| 2019-04-16 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/all/gas.exp: Remove ns32k xfails. |
| * testsuite/gas/all/weakref1u.d: Don't run for ns32k-*-*. |
| |
| 2019-04-16 Alan Modra <amodra@gmail.com> |
| |
| * write.h: Don't include bit_fix.h. |
| (struct fix): Rearrange some fields. Delete fx_im_disp and |
| fx_bit_fixP. Use bitfields for fx_size and fx_pcrel_adjust. |
| * write.c (fix_new_internal): Don't init fx_im_disp and fx_bit_fixP. |
| (fixup_segment): Don't exclude overflow checks on fx_bit_fixP. |
| (print_fixup): Don't print im_disp. |
| * config/tc-cris.c (md_apply_fix): Remove tests of fx_bit_fixP |
| and fx_im_disp. |
| * config/tc-dlx.c (md_apply_fix): Remove wrong debug code. Set |
| fx_no_overflow when fx_bit_fixP. |
| * config/tc-dlx.h: Include bit_fix.h. |
| (TC_FIX_TYPE, tc_fix_data, TC_INIT_FIX_DATA): Define. |
| * config/tc-ns32k.c (fix_new_ns32k, fix_new_ns32k_exp): Set |
| fx_no_overflow when bit_fixP. |
| * config/tc-ns32k.h (TC_FIX_TYPE): Add fx_bit_fixP and fx_im_disp. |
| (fix_im_disp, fix_bit_fixP): Adjust to suit. |
| (TC_INIT_FIX_DATA, TC_FIX_DATA_PRINT): Likewise. |
| |
| 2019-04-16 Alan Modra <amodra@gmail.com> |
| |
| * write.h (struct fix <fx_where>): Make unsigned. |
| (fix_new, fix_at_start, fix_new_exp): Adjust prototypes. |
| * write.c (fix_new, fix_new_exp, fix_at_start): Make "where" and |
| "size" parameters unsigned long. |
| (fix_new_internal): Likewise. Adjust error format string to suit. |
| * config/tc-mips.c (md_convert_frag): Remove cast of fx_where. |
| * config/tc-sparc.c (md_apply_fix): Likewise. |
| * config/tc-score.c (s3_convert_frag): Adjust for unsigned fx_where. |
| * config/tc-score7.c (s7_convert_frag): Likewise. |
| |
| 2019-04-16 Alan Modra <amodra@gmail.com> |
| |
| * frags.h (struct frag <fr_fix>): Use unsigned type. |
| * frags.c (frag_new): Assert that current size exceeds |
| old_frags_var_max_size. |
| * ehopt.c (get_cie_info): Adjust for unsigned fr_fix. |
| * listing.c (calc_hex): Likewise. |
| * write.c (cvt_frag_to_fill, write_relocs): Likewise. |
| * config/tc-arc.c (md_convert_frag): Likewise. |
| * config/tc-avr.c (avr_patch_gccisr_frag): Likewise. |
| * config/tc-mips.c (md_convert_frag): Likewise. |
| * config/tc-rl78.c (md_convert_frag): Likewise. |
| * config/tc-rx.c (md_convert_frag): Likewise. |
| * config/tc-sparc.c (md_apply_fix): Likewise. |
| * config/tc-xtensa.c (next_instrs_are_b_retw): Likewise. |
| (unrelaxed_frag_min_insn_count, unrelaxed_frag_has_b_j): Likewise. |
| |
| 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (parse_sys_vldr_vstr): New function. |
| (OP_VLDR): New enum operand_parse_code enumerator. |
| (parse_operands): Add logic for OP_VLDR. |
| (do_t_vldr_vstr_sysreg): New function. |
| (do_vldr_vstr): Likewise. |
| (insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode. |
| (md_apply_fix): Add bound check for VLDR and VSTR co-processor offset. |
| Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation. |
| * testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad |
| uses of VLDR and VSTR. |
| * testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for |
| above bad uses. |
| * testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and |
| VSTR valid uses. |
| * testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the |
| above examples. |
| |
| 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (arm_typed_reg_parse): Fix typo in comment. |
| (enum reg_list_els): New REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR |
| enumerators. |
| (parse_vfp_reg_list): Add new partial_match parameter. Set |
| *partial_match to TRUE if at least one element in the register list has |
| matched. Add support for REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR |
| register lists which expect VPR as last element in the list. |
| (s_arm_unwind_save_vfp_armv6): Adapt call to parse_vfp_reg_list to new |
| prototype. |
| (s_arm_unwind_save_vfp): Likewise. |
| (enum operand_parse_code): New OP_VRSDVLST enumerator. |
| (parse_operands): Adapt call to parse_vfp_reg_list to new prototype. |
| Handle new OP_VRSDVLST case. |
| (do_t_vscclrm): New function. |
| (insns): New entry for VSCCLRM instruction. |
| * testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add invalid VSCCLRM |
| instructions. |
| * testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error expectations |
| for above instructions. |
| * testsuite/gas/arm/archv8m_1m-cmse-main.s: Add tests for VSCCLRM |
| instruction. |
| * testsuite/gas/arm/archv8m_1m-cmse-main.d: Add expected disassembly |
| for above instructions. |
| |
| 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (enum reg_list_els): Define earlier and add |
| REGLIST_RN and REGLIST_CLRM enumerators. |
| (parse_reg_list): Add etype parameter to distinguish between regular |
| core register list and CLRM register list. Add logic to |
| recognize CLRM register list. |
| (parse_vfp_reg_list): Assert type is not for core register list. |
| (s_arm_unwind_save_core): Update call to parse_reg_list to new |
| prototype. |
| (enum operand_parse_code): Declare OP_CLRMLST enumerator. |
| (parse_operands): Update call to parse_reg_list to new prototype. Add |
| logic for OP_CLRMLST. |
| (encode_thumb2_ldmstm): Rename into ... |
| (encode_thumb2_multi): This. Add do_io parameter. Add logic to |
| encode CLRM and guard LDM/STM only code by do_io. |
| (do_t_ldmstm): Adapt to use encode_thumb2_multi. |
| (do_t_push_pop): Likewise. |
| (do_t_clrm): New function. |
| (insns): Define CLRM. |
| * testsuite/gas/arm/archv8m_1m-cmse-main-bad.d: New file. |
| * testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Likewise. |
| * testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Likewise. |
| * testsuite/gas/arm/archv8m_1m-cmse-main.d: Likewise. |
| * testsuite/gas/arm/archv8m_1m-cmse-main.s: Likewise. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (operand_parse_code): Add OP_LR and OP_oLR |
| for the LR operand and optional LR operand. |
| (parse_operands): Add switch cases for OP_LR and OP_oLR for |
| both type checking and value checking. |
| (encode_thumb32_addr_mode): New entries for DLS, WLS and LE. |
| (v8_1_loop_reloc): New helper function for handling labels |
| for the low overhead loop instructions. |
| (do_t_loloop): New function to encode DLS, WLS and LE. |
| (insns): New entries for WLS, DLS and LE. |
| (md_pcrel_from_section): New switch case |
| for BFD_RELOC_ARM_THUMB_LOOP12. |
| (md_appdy_fix): Likewise. |
| (tc_gen_reloc): Likewise. |
| * testsuite/gas/arm/armv8_1-m-tloop.s: New. |
| * testsuite/gas/arm/armv8_1-m-tloop.d: New. |
| * testsuite/gas/arm/armv8_1-m-tloop-bad.s: New. |
| * testsuite/gas/arm/armv8_1-m-tloop-bad.d: New. |
| * testsuite/gas/arm/armv8_1-m-tloop-bad.l: New. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (T16_32_TAB): New entriy for bfcsel. |
| (do_t_v8_1_branch): New switch case for bfcsel. |
| (toU): Define. |
| (insns): New instruction for bfcsel. |
| (md_pcrel_from_section): New switch case |
| for BFD_RELOC_THUMB_PCREL_BFCSEL. |
| (md_appdy_fix): Likewise |
| (tc_gen_reloc): Likewise. |
| * testsuite/gas/arm/armv8_1-m-bfcsel.d: New. |
| * testsuite/gas/arm/armv8_1-m-bfcsel.s: New. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-arm.c (md_pcrel_from_section): New switch case for |
| BFD_RELOC_ARM_THUMB_BF13. |
| (md_appdy_fix): Likewise. |
| (tc_gen_reloc): Likewise. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (T16_32_TAB): New entrie for bfl. |
| (do_t_v8_1_branch): New switch case for bfl. |
| (insns): New instruction for bfl. |
| * testsuite/gas/arm/armv8_1-m-bfl.d: New. |
| * testsuite/gas/arm/armv8_1-m-bfl.s: New. |
| * testsuite/gas/arm/armv8_1-m-bfl-bad.s: New. |
| * testsuite/gas/arm/armv8_1-m-bfl-bad.d: New. |
| * testsuite/gas/arm/armv8_1-m-bfl-bad.l: New. |
| * testsuite/gas/arm/armv8_1-m-bfl-rel.d: New. |
| * testsuite/gas/arm/armv8_1-m-bfl-rel.s: New. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-arm.c (md_pcrel_from_section): New switch case for |
| BFD_RELOC_ARM_THUMB_BF19. |
| (md_appdy_fix): Likewise. |
| (tc_gen_reloc): Likewise. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-arm.c (T16_32_TAB): New entries for bfx and bflx. |
| (do_t_v8_1_branch): New switch cases for bfx and bflx. |
| (insns): New instruction for bfx and bflx. |
| * testsuite/gas/arm/armv8_1-m-bf-exchange.d: New. |
| * testsuite/gas/arm/armv8_1-m-bf-exchange.s: New. |
| * testsuite/gas/arm/armv8_1-m-bf-exchange-bad.s: New |
| * testsuite/gas/arm/armv8_1-m-bf-exchange-bad.l: New |
| * testsuite/gas/arm/armv8_1-m-bf-exchange-bad.d: New |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (T16_32_TAB): New entries for bf. |
| (do_t_branch_future): New. |
| (insns): New instruction for bf. |
| * testsuite/gas/arm/armv8_1-m-bf.d: New. |
| * testsuite/gas/arm/armv8_1-m-bf.s: New. |
| * testsuite/gas/arm/armv8_1-m-bf-bad.s: New. |
| * testsuite/gas/arm/armv8_1-m-bf-bad.l: New. |
| * testsuite/gas/arm/armv8_1-m-bf-bad.d: New. |
| * testsuite/gas/arm/armv8_1-m-bf-rel.d: New. |
| * testsuite/gas/arm/armv8_1-m-bf-rel.s: New. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-arm.c (md_pcrel_from_section): New switch case for |
| BFD_RELOC_ARM_THUMB_BF17. |
| (md_appdy_fix): Likewise. |
| (tc_gen_reloc): Likewise. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-arm.c (ARM_IT_MAX_RELOCS): New macro. |
| (arm_it): Member reloc renamed relocs and updated to an array. |
| Rest: Replace all occurrences of reloc to relocs[0]. |
| |
| 2019-04-15 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-arm.c (md_pcrel_from_section): New switch case |
| for BFD_RELOC_THUMB_PCREL_BRANCH5. |
| (v8_1_branch_value_check): New function to check branch |
| offsets. |
| (md_appdy_fix): New switch case for |
| BFD_RELOC_THUMB_PCREL_BRANCH5. |
| (tc_gen_reloc): Likewise. |
| |
| 2019-04-15 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (do_neon_movhf): Remove fp-armv8 check. |
| (armv8_1m_main_ext_table): New extension table. |
| (arm_archs): Use the new extension table. |
| * doc/c-arm.texi: Add missing arch and document new extensions. |
| * testsuite/gas/arm/armv8.1-m.main-fp.d: New. |
| * testsuite/gas/arm/armv8.1-m.main-fp-dp.d: New. |
| * testsuite/gas/arm/armv8.1-m.main-hp.d: New. |
| |
| 2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com> |
| |
| * config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline |
| Tag_CPU_arch build attribute value. Reindent. |
| (get_aeabi_cpu_arch_from_fset): Update assert. |
| (aeabi_set_public_attributes): Update assert for Tag_DIV_use logic. |
| * testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test. |
| |
| 2019-04-09 Matthew Fortune <matthew.fortune@mips.com> |
| |
| * config/tc-mips.c (mips_cpu_info_table): Add i6500. Update |
| default ASEs for i6400. |
| * doc/c-mips.texi (-march): Document i6500. |
| * testsuite/gas/mips/elf_mach_i6400.d: New test. |
| * testsuite/gas/mips/elf_mach_i6500.d: New test. |
| * testsuite/gas/mips/mips.exp: Run the new tests. |
| |
| 2019-04-09 Matthew Fortune <matthew.fortune@mips.com> |
| |
| * config/tc-mips.c (mips_set_options) <init_ase>: New field. |
| (file_mips_opts, mips_opts) <init_ase>: Initialize new field. |
| (file_mips_check_options): Propagate initial ASE settings. |
| (mips_after_parse_args, parse_code_option): Track the initial |
| ASE settings for a CPU. |
| (s_mipsset): Restore the initial ASE settings when reverting |
| to the default arch. |
| * testsuite/gas/mips/elf_mach_p6600.d: New test. |
| * testsuite/gas/mips/mips.exp: Run the new test. |
| |
| 2019-04-12 John Darrington <john@darrington.wattle.id.au> |
| |
| config/tc-s12z.h: Remove definition of macro TC_M68K |
| |
| 2019-04-01 John Darrington <john@darrington.wattle.id.au> |
| |
| config/tc-s12z.c: Use bfd_boolean where appropriate. |
| |
| 2019-04-11 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * testsuite/gas/xtensa/loop-relax-2.d: New test definition. |
| * testsuite/gas/xtensa/loop-relax.d: New test definition. |
| * testsuite/gas/xtensa/loop-relax.s: New test source. |
| * testsuite/gas/xtensa/text-section-literals-1a.d: New test |
| definition. |
| * testsuite/gas/xtensa/text-section-literals-2.d: New test |
| definition. |
| * testsuite/gas/xtensa/text-section-literals-2.s: New test |
| source. |
| * testsuite/gas/xtensa/text-section-literals-2a.d: New test |
| definition. |
| * testsuite/gas/xtensa/text-section-literals-3.d: New test |
| definition. |
| * testsuite/gas/xtensa/text-section-literals-3.s: New test |
| source. |
| * testsuite/gas/xtensa/text-section-literals-4.d: New test |
| definition. |
| * testsuite/gas/xtensa/text-section-literals-4.s: New test |
| source. |
| * testsuite/gas/xtensa/text-section-literals-4a.d: New test |
| definition. |
| |
| 2019-04-11 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * testsuite/gas/xtensa/all.exp: Remove all expect-based |
| tests and all explicit run_dump_test / run_list_test |
| invocations. Add run_dump_tests for all .d files in the |
| test subdirectory. |
| * testsuite/gas/xtensa/entry_align.d: New test definition. |
| * testsuite/gas/xtensa/entry_align.l: New test output. |
| * testsuite/gas/xtensa/entry_misalign.d: New test definition. |
| * testsuite/gas/xtensa/entry_misalign2.d: New test definition. |
| * testsuite/gas/xtensa/j_too_far.d: New test definition. |
| * testsuite/gas/xtensa/j_too_far.l: New test output. |
| * testsuite/gas/xtensa/loop_align.d: New test definition. |
| * testsuite/gas/xtensa/loop_misalign.d: New test definition. |
| * testsuite/gas/xtensa/trampoline-2.d: New test definition. |
| * testsuite/gas/xtensa/trampoline-2.l: Remove empty output. |
| * testsuite/gas/xtensa/xtensa-err.exp: Use positive logic. |
| |
| 2019-04-11 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * config/tc-xtensa.c (xtensa_literal_pseudo): Drop code that has |
| no effect. |
| (get_literal_pool_location): Only search for the literal pool |
| when auto litpools is used, otherwise take one recorded in the |
| tc_segment_info_data. |
| (xtensa_assign_litpool_addresses): New function. |
| (xtensa_move_literals): Don't duplicate 'literal pool location |
| required...' error message. Call xtensa_assign_litpool_addresses. |
| |
| 2019-04-11 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * config/tc-xtensa.c (xtensa_is_init_fini): Add declaration. |
| (xtensa_mark_literal_pool_location): Don't add fill frag to literal |
| section that records literal pool location. |
| (md_begin): Call xtensa_mark_literal_pool_location when text |
| section literals or auto litpools are used. |
| (xtensa_elf_section_change_hook): Call |
| xtensa_mark_literal_pool_location when text section literals or |
| auto litpools are used, there's no literal pool location defined |
| for the current section and it's not .init or .fini. |
| * testsuite/gas/xtensa/auto-litpools-first1.d: Fix up addresses. |
| * testsuite/gas/xtensa/auto-litpools-first2.d: Likewise. |
| * testsuite/gas/xtensa/auto-litpools.d: Likewise. |
| |
| 2019-04-11 Sudakshina Das <sudi.das@arm.com> |
| |
| * config/tc-aarch64.c (process_omitted_operand): Add case for |
| AARCH64_OPND_Rt_SP. |
| (parse_operands): Likewise. |
| * testsuite/gas/aarch64/armv8_5-a-memtag.d: Update tests. |
| * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. |
| * testsuite/gas/aarch64/illegal-memtag.l: Likewise. |
| * testsuite/gas/aarch64/illegal-memtag.s: Likewise. |
| |
| 2019-04-11 Sudakshina Das <sudi.das@arm.com> |
| |
| * testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for ldgm and stgm. |
| * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. |
| * testsuite/gas/aarch64/illegal-memtag.l: Likewise. |
| * testsuite/gas/aarch64/illegal-memtag.s: Likewise. |
| |
| 2019-04-10 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> |
| |
| * config/tc-i386.c (need_plt32_p) [TE_SOLARIS]: Return FALSE. |
| * testsuite/gas/i386/solaris/solaris.exp: New driver. |
| * testsuite/gas/i386/solaris/reloc64.d, |
| testsuite/gas/i386/solaris/x86-64-jump.d, |
| testsuite/gas/i386/solaris/x86-64-mpx-branch-1.d, |
| testsuite/gas/i386/solaris/x86-64-mpx-branch-2.d, |
| testsuite/gas/i386/solaris/x86-64-nop-3.d, |
| testsuite/gas/i386/solaris/x86-64-nop-4.d, |
| testsuite/gas/i386/solaris/x86-64-nop-5.d, |
| testsuite/gas/i386/solaris/x86-64-relax-2.d, |
| testsuite/gas/i386/solaris/x86-64-relax-3.d: New tests. |
| * testsuite/gas/i386/reloc64.d, |
| testsuite/gas/i386/x86-64-jump.d, |
| testsuite/gas/i386/x86-64-mpx-branch-1.d, |
| testsuite/gas/i386/x86-64-mpx-branch-2.d, |
| testsuite/gas/i386/x86-64-nop-3.d, |
| testsuite/gas/i386/x86-64-nop-4.d, |
| testsuite/gas/i386/x86-64-nop-5.d, |
| testsuite/gas/i386/x86-64-relax-2.d, |
| testsuite/gas/i386/x86-64-relax-3.d: Skip on *-*-solaris*. |
| |
| 2019-04-10 Alan Modra <amodra@gmail.com> |
| |
| * config/te-cloudabi.h: New file. |
| * config/tc-aarch64.c (aarch64_after_parse_args): Use TE_CLOUDABI |
| rather than TARGET_OS to select cloudabi. |
| * config/tc-i386.h (ELF_TARGET_FORMAT64): Define for TE_CLOUDABI. |
| * configure.tgt (*-*-cloudabi*): Set em=cloudabi. |
| |
| 2019-04-09 Robert Suchanek <robert.suchanek@mips.com> |
| |
| * testsuite/gas/mips/mips.exp: Run hwr-names test. |
| * testsuite/gas/mips/hwr-names.s: Add test cases for RDHWR with |
| the SEL field. |
| * testsuite/gas/mips/mipsr6@hwr-names.d: New file. |
| |
| 2019-04-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (output_insn): Support |
| GNU_PROPERTY_X86_ISA_1_AVX512_BF16. |
| * testsuite/gas/i386/property-2.s: Add AVX512_BF16 test. |
| * testsuite/gas/i386/property-2.d: Updated. |
| * testsuite/gas/i386/x86-64-property-2.d: Likewise. |
| |
| 2019-04-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure.tgt: Remove i386-*-kaos* and i386-*-chaos targets. |
| * testsuite/gas/i386/i386.exp: Remove *-*-caos* and "*-*-kaos* |
| check. |
| |
| 2019-04-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/gas/i386/i386.exp: Run -mx86-used-note=yes tests. |
| * testsuite/gas/i386/property-2.d: New file. |
| * testsuite/gas/i386/property-2.s: Likewise. |
| * testsuite/gas/i386/x86-64-property-2.d: Likewise. |
| |
| 2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com> |
| |
| * config/tc-i386.c (cpu_arch): Add .avx512_bf16. |
| (cpu_noarch): Add noavx512_bf16. |
| * doc/c-i386.texi: Document avx512_bf16. |
| * testsuite/gas/i386/avx512_bf16.d: New file. |
| * testsuite/gas/i386/avx512_bf16.s: Likewise. |
| * testsuite/gas/i386/avx512_bf16_vl-inval.l: Likewise. |
| * testsuite/gas/i386/avx512_bf16_vl-inval.s: Likewise. |
| * testsuite/gas/i386/avx512_bf16_vl.d: Likewise. |
| * testsuite/gas/i386/avx512_bf16_vl.s: Likewise. |
| * testsuite/gas/i386/x86-64-avx512_bf16.d: Likewise. |
| * testsuite/gas/i386/x86-64-avx512_bf16.s: Likewise. |
| * testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.l: Likesie. |
| * testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.s: Likewise. |
| * testsuite/gas/i386/x86-64-avx512_bf16_vl.d: Likewise. |
| * testsuite/gas/i386/x86-64-avx512_bf16_vl.s: Likewise. |
| * testsuite/gas/i386/i386.exp: Add BF16 related tests. |
| |
| 2019-04-05 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/ppc/bc.s, |
| * testsuite/gas/ppc/bcat.d, |
| * testsuite/gas/ppc/bcaterr.d, |
| * testsuite/gas/ppc/bcaterr.l, |
| * testsuite/gas/ppc/bcy.d, |
| * testsuite/gas/ppc/bcyerr.d, |
| * testsuite/gas/ppc/bcyerr.l: New tests. |
| * testsuite/gas/ppc/ppc.exp: Run them. |
| |
| 2019-04-05 Alan Modra <amodra@gmail.com> |
| |
| * testsuite/gas/ppc/476.d: Remove trailing spaces. |
| * testsuite/gas/ppc/a2.d: Likewise. |
| * testsuite/gas/ppc/booke.d: Likewise. |
| * testsuite/gas/ppc/booke_xcoff.d: Likewise. |
| * testsuite/gas/ppc/e500.d: Likewise. |
| * testsuite/gas/ppc/e500mc.d: Likewise. |
| * testsuite/gas/ppc/e6500.d: Likewise. |
| * testsuite/gas/ppc/htm.d: Likewise. |
| * testsuite/gas/ppc/power6.d: Likewise. |
| * testsuite/gas/ppc/power8.d: Likewise. |
| * testsuite/gas/ppc/power9.d: Likewise. |
| * testsuite/gas/ppc/vle.d: Likewise. |
| |
| 2019-04-04 Peter Bergner <bergner@linux.ibm.com> |
| |
| PR gas/24349 |
| * testsuite/gas/ppc/power8.s: (bdnztar, bdnztarl, bdztar, bdztarl, |
| btar, btarl, bdnztar-, bdnztarl-, bdnztar+, bdnztarl+, bdztar-, |
| bdztarl-, bdztar+, bdztarl+, bgetar, bnltar, bgetarl, bnltarl, |
| bletar, bngtar, bletarl, bngtarl, bnetar, bnetarl, bnstar, bnutar, |
| bnstarl, bnutarl, bgetar-, bnltar-, bgetarl-, bnltarl-, bletar-, |
| bngtar-, bletarl-, bngtarl-, bnetar-, bnetarl-, bnstar-, bnutar-, |
| bnstarl-, bnutarl-, bgetar+, bnltar+, bgetarl+, bnltarl+, bletar+, |
| bngtar+, bletarl+, bngtarl+, bnetar+, bnetarl+, bnstar+, bnutar+, |
| bnstarl+, bnutarl+, blttar, blttarl, bgttar, bgttarl, beqtar, |
| beqtarl, bsotar, buntar, bsotarl, buntarl, blttar-, blttarl-, |
| bgttar-, bgttarl-, beqtar-, beqtarl-, bsotar-, buntar-, bsotarl-, |
| buntarl-, blttar+, blttarl+, bgttar+, bgttarl+, beqtar+, beqtarl+, |
| bsotar+, buntar+, bsotarl+, buntarl+, bdnzftar, bdnzftarl, bdzftar, |
| bdzftarl, bftar, bftarl, bftar-, bftarl-, bftar+, bftarl+, bdnzttar, |
| bdnzttarl, bdzttar, bdzttarl, bttar, bttarl, bttar-, bttarl-, bttar+, |
| bttarl+): Add tests of extended mnemonics. |
| * testsuite/gas/ppc/power8.d: Likewise. Update previous bctar tests |
| to expect new extended mnemonics. |
| * testsuite/gas/ppc/a2.s: <bc, bc-, bc+, bcl, bcl-, bcl+>: Update test |
| to not use illegal BO value. Use a more convenient BI value. |
| * testsuite/gas/ppc/a2.d: Update tests for new expect output. |
| |
| 2019-04-03 Max Filippov <jcmvbkbc@gmail.com> |
| |
| * config/tc-xtensa.c (convert_frag_immed): Drop |
| convert_frag_immed_finish_loop invocation. |
| (convert_frag_immed_finish_loop): Drop declaration and |
| definition. |
| * config/xtensa-relax.c (widen_spec_list): Replace loop |
| widening that uses addi/addmi with widening that uses l32r |
| and const16. |
| |
| 2019-04-01 Andre Vieira <andre.simoesdiasvieira@arm.com> |
| |
| * config/tc-arm.c (arm_ext_table): New struct type. |
| (arm_arch_option_table): Add new 'arm_ext_table' field. |
| (ARM_EXT,ARM_ADD,ARM_REMOVE, ALL_FP): New macros. |
| (armv5te_ext_table, armv7ve_ext_table, armv7a_ext_table, |
| armv7r_ext_table, armv7em_ext_table, armv8a_ext_table, |
| armv81a_ext_table, armv82a_ext_table, armv84a_ext_table, |
| armv85a_ext_table, armv8m_main_ext_table, |
| armv8r_ext_table): New architecture extension tables. |
| (ARM_ARCH_OPT): Add new default field. |
| (ARM_ARCH_OPT2): New macro. |
| (arm_archs): Extend some architectures with the new architecture |
| extension tables mentioned above. |
| (arm_extensions): Add DEPRECATED comment with instructions to |
| use new table. |
| (arm_parse_extension): Change to use new extension tables. |
| (arm_parse_cpu): Don't change existing behavior. |
| (arm_parse_arch): Change to use new extension tables. |
| * doc/c-arm.texi: Document new architecture extensions. |
| * testsuite/gas/arm/attr-mfpu-neon-fp16.d: Change test to use new |
| extension option rather than -mfpu and change expected behaviour to |
| sane outputs. |
| * testsuite/gas/arm/armv8-2-fp16-scalar-bad-ext.d: New. |
| * testsuite/gas/arm/armv8-2-fp16-scalar-ext.d: New. |
| * testsuite/gas/arm/armv8-2-fp16-scalar-thumb-ext.d: New. |
| * testsuite/gas/arm/armv8-2-fp16-simd-ext.d: New. |
| * testsuite/gas/arm/armv8-2-fp16-simd-thumb-ext.d: New. |
| * testsuite/gas/arm/armv8-2-fp16-simd-warning-ext.d: New. |
| * testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb-ext.d: New. |
| * testsuite/gas/arm/armv8_2+rdma-ext.d: New. |
| * testsuite/gas/arm/armv8_2-a-fp16-thumb2-ext.d: New. |
| * testsuite/gas/arm/armv8_2-a-fp16_ext.d: New. |
| * testsuite/gas/arm/armv8_3-a-fp-bad-ext.d: New. |
| * testsuite/gas/arm/armv8_3-a-fp-ext.d: New. |
| * testsuite/gas/arm/armv8_3-a-fp16-ext.d: New. |
| * testsuite/gas/arm/armv8_3-a-simd-bad-ext.d: New. |
| * testsuite/gas/arm/armv8_4-a-fp16-ext.d: New. |
| * testsuite/gas/arm/armv8m.main+fp.d: New. |
| * testsuite/gas/arm/armv8m.main+fp.dp.d: New. |
| * testsuite/gas/arm/attr-ext-fpv5-d16.d: New. |
| * testsuite/gas/arm/attr-ext-fpv5.d: New. |
| * testsuite/gas/arm/attr-ext-idiv.d: New. |
| * testsuite/gas/arm/attr-ext-mp.d: New. |
| * testsuite/gas/arm/attr-ext-neon-fp16.d: New. |
| * testsuite/gas/arm/attr-ext-neon-vfpv3.d: New. |
| * testsuite/gas/arm/attr-ext-neon-vfpv4.d: New. |
| * testsuite/gas/arm/attr-ext-sec.d: New. |
| * testsuite/gas/arm/attr-ext-vfpv3-d16-fp16.d: New. |
| * testsuite/gas/arm/attr-ext-vfpv3-d16.d: New. |
| * testsuite/gas/arm/attr-ext-vfpv3-fp16.d: New. |
| * testsuite/gas/arm/attr-ext-vfpv3.d: New. |
| * testsuite/gas/arm/attr-ext-vfpv3xd-fp.d: New. |
| * testsuite/gas/arm/attr-ext-vfpv3xd.d: New. |
| * testsuite/gas/arm/attr-ext-vfpv4-d16.d: New. |
| * testsuite/gas/arm/attr-ext-vfpv4-sp-d16.d: New. |
| * testsuite/gas/arm/attr-ext-vfpv4.d: New. |
| * testsuite/gas/arm/dotprod-mandatory-ext.d: New. |
| * testsuite/gas/arm/fpv5-d16.s: New. |
| * testsuite/gas/arm/fpv5-sp-d16.s: New. |
| |
| 2019-03-28 Alan Modra <amodra@gmail.com> |
| |
| PR 24390 |
| * testsuite/gas/ppc/476.d: Update mtfsb*. |
| * testsuite/gas/ppc/a2.d: Likewise. |
| |
| 2019-03-21 Alan Modra <amodra@gmail.com> |
| |
| * emul.h (struct emulation): Delete strip_underscore. |
| * emul-target.h (emul_strip_underscore): Don't define. |
| (emul_struct_name): Update initialization. |
| |
| 2019-03-21 Alan Modra <amodra@gmail.com> |
| |
| * config/tc-d10v.c (md_apply_fix): Apply BFD_RELOC_8. |
| * config/tc-pdp11.c (md_apply_fix): Likewise. |
| * config/tc-d30v.c (md_apply_fix): Don't emit errors for BFD_RELOC_8, |
| BFD_RELOC_16, and BFD_RELOC_64. |
| * testsuite/gas/all/gas.exp: Move target exclusions for forward |
| test, but not cr16, to.. |
| * testsuite/gas/all/forward.d: ..here, with explanation. Remove |
| d10v, d30v, and pdp11 xfails. |
| |
| 2019-03-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (optimize_encoding): Don't check AVX for |
| EVEX vector load/store optimization. Check both operands for |
| ZMM register. Update EVEX vector load/store opcode check. |
| Choose EVEX Disp8 over VEX Disp32. |
| * testsuite/gas/i386/optimize-1.d: Updated. |
| * testsuite/gas/i386/optimize-1a.d: Likewise. |
| * testsuite/gas/i386/optimize-2.d: Likewise. |
| * testsuite/gas/i386/optimize-4.d: Likewise. |
| * testsuite/gas/i386/optimize-5.d: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-2.d: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-2a.d: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-2b.d: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-3.d: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-5.d: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-6.d: Likewise. |
| * testsuite/gas/i386/optimize-1.s: Add ZMM register load |
| test. |
| * testsuite/gas/i386/x86-64-optimize-2.s: Likewise. |
| |
| 2019-03-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/24352 |
| * config/tc-i386.c (optimize_encoding): Check only |
| cpu_arch_flags.bitfield.cpuavx512vl. |
| * testsuite/gas/i386/i386.exp: Run x86-64-optimize-2b. |
| * testsuite/gas/i386/x86-64-optimize-2.d: Revert the last |
| change. |
| * testsuite/gas/i386/x86-64-optimize-2b.d: New file. |
| * testsuite/gas/i386/x86-64-optimize-2b.s: Likewise. |
| |
| 2019-03-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/24359 |
| * testsuite/gas/i386/i386.exp: Change optimize-6a, optimize-7, |
| x86-64-optimize-7a and x86-64-optimize-8 tests to run_list_test. |
| Remove optimize-6c and x86-64-optimize-7c tests. |
| * testsuite/gas/i386/noavx-3.l: Updated. |
| * testsuite/gas/i386/noavx-4.d: Likewise. |
| * testsuite/gas/i386/noavx-5.d: Likewise. |
| * testsuite/gas/i386/noavx-3.s: Add AVX512F tests. |
| * testsuite/gas/i386/noavx-4.s: Remove AVX512F tests. |
| * testsuite/gas/i386/nosse-5.s: Likewise. |
| * testsuite/gas/i386/optimize-6a.d: Removed. |
| * testsuite/gas/i386/optimize-6c.d: Likewise. |
| * testsuite/gas/i386/optimize-7.d: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-7a.d: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-7c.d: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-8.d: Likewise. |
| * testsuite/gas/i386/optimize-6a.l: New file. |
| * testsuite/gas/i386/optimize-6a.s: Likewise. |
| * testsuite/gas/i386/optimize-7.l: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-7a.l: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-7a.s: Likewise. |
| * testsuite/gas/i386/x86-64-optimize-8.l: Likewise. |
| |
| 2019-03-18 Alan Modra <amodra@gmail.com> |
| |
| * config/m68k-parse.y (yylex): Use temp_ilp and restore_ilp. |
| * as.c (macro_expr): Likewise. |
| * macro.c (buffer_and_nest): Likewise. |
| * read.c (temp_ilp): Remove FIXME. |
| |
| 2019-03-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * testsuite/gas/i386/att-regs.d: Pass -O0 to assembler. |
| * testsuite/gas/i386/avx512bw-intel.d: Likewise. |
| * testsuite/gas/i386/avx512bw.d: Likewise. |
| * testsuite/gas/i386/avx512f-intel.d: Likewise. |
| * testsuite/gas/i386/avx512f.d: Likewise. |
| * testsuite/gas/i386/disp32.d: Likewise. |
| * testsuite/gas/i386/intel-regs.d: Likewise. |
| * testsuite/gas/i386/pseudos.d: Likewise. |
| * testsuite/gas/i386/x86-64-disp32.d: Likewise. |
| * testsuite/gas/i386/x86-64-pseudos.d: Likewise. |
| |
| 2019-03-18 H.J. Lu <hongjiu.lu@intel.com> |
| |