| /* Native-dependent code for GNU/Linux AArch64. |
| |
| Copyright (C) 2011-2024 Free Software Foundation, Inc. |
| Contributed by ARM Ltd. |
| |
| This file is part of GDB. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| |
| |
| #include "inferior.h" |
| #include "gdbcore.h" |
| #include "regcache.h" |
| #include "linux-nat.h" |
| #include "target-descriptions.h" |
| #include "auxv.h" |
| #include "cli/cli-cmds.h" |
| #include "aarch64-nat.h" |
| #include "aarch64-tdep.h" |
| #include "aarch64-linux-tdep.h" |
| #include "aarch32-linux-nat.h" |
| #include "aarch32-tdep.h" |
| #include "arch/arm.h" |
| #include "nat/aarch64-linux.h" |
| #include "nat/aarch64-linux-hw-point.h" |
| #include "nat/aarch64-scalable-linux-ptrace.h" |
| |
| #include "elf/external.h" |
| #include "elf/common.h" |
| |
| #include "nat/gdb_ptrace.h" |
| #include <sys/utsname.h> |
| #include <asm/ptrace.h> |
| |
| #include "gregset.h" |
| #include "linux-tdep.h" |
| #include "arm-tdep.h" |
| |
| /* Defines ps_err_e, struct ps_prochandle. */ |
| #include "gdb_proc_service.h" |
| #include "arch-utils.h" |
| |
| #include "arch/aarch64-mte-linux.h" |
| |
| #include "nat/aarch64-mte-linux-ptrace.h" |
| #include "arch/aarch64-scalable-linux.h" |
| |
| #include <string.h> |
| |
| #ifndef TRAP_HWBKPT |
| #define TRAP_HWBKPT 0x0004 |
| #endif |
| |
| class aarch64_linux_nat_target final |
| : public aarch64_nat_target<linux_nat_target> |
| { |
| public: |
| /* Add our register access methods. */ |
| void fetch_registers (struct regcache *, int) override; |
| void store_registers (struct regcache *, int) override; |
| |
| const struct target_desc *read_description () override; |
| |
| /* Add our hardware breakpoint and watchpoint implementation. */ |
| bool stopped_by_watchpoint () override; |
| bool stopped_data_address (CORE_ADDR *) override; |
| |
| int can_do_single_step () override; |
| |
| /* These three defer to common nat/ code. */ |
| void low_new_thread (struct lwp_info *lp) override |
| { aarch64_linux_new_thread (lp); } |
| void low_delete_thread (struct arch_lwp_info *lp) override |
| { aarch64_linux_delete_thread (lp); } |
| void low_prepare_to_resume (struct lwp_info *lp) override |
| { aarch64_linux_prepare_to_resume (lp); } |
| |
| void low_new_fork (struct lwp_info *parent, pid_t child_pid) override; |
| void low_init_process (pid_t pid) override; |
| void low_forget_process (pid_t pid) override; |
| |
| /* Add our siginfo layout converter. */ |
| bool low_siginfo_fixup (siginfo_t *ptrace, gdb_byte *inf, int direction) |
| override; |
| |
| struct gdbarch *thread_architecture (ptid_t) override; |
| |
| bool supports_memory_tagging () override; |
| |
| /* Read memory allocation tags from memory via PTRACE. */ |
| bool fetch_memtags (CORE_ADDR address, size_t len, |
| gdb::byte_vector &tags, int type) override; |
| |
| /* Write allocation tags to memory via PTRACE. */ |
| bool store_memtags (CORE_ADDR address, size_t len, |
| const gdb::byte_vector &tags, int type) override; |
| /* Check if an address is tagged. */ |
| bool is_address_tagged (gdbarch *gdbarch, CORE_ADDR address) override; |
| }; |
| |
| static aarch64_linux_nat_target the_aarch64_linux_nat_target; |
| |
| /* Called whenever GDB is no longer debugging process PID. It deletes |
| data structures that keep track of debug register state. */ |
| |
| void |
| aarch64_linux_nat_target::low_forget_process (pid_t pid) |
| { |
| aarch64_remove_debug_reg_state (pid); |
| } |
| |
| /* Fill GDB's register array with the general-purpose register values |
| from the current thread. */ |
| |
| static void |
| fetch_gregs_from_thread (struct regcache *regcache) |
| { |
| int ret, tid; |
| struct gdbarch *gdbarch = regcache->arch (); |
| elf_gregset_t regs; |
| struct iovec iovec; |
| |
| /* Make sure REGS can hold all registers contents on both aarch64 |
| and arm. */ |
| static_assert (sizeof (regs) >= 18 * 4); |
| |
| tid = regcache->ptid ().lwp (); |
| |
| iovec.iov_base = ®s; |
| if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32) |
| iovec.iov_len = 18 * 4; |
| else |
| iovec.iov_len = sizeof (regs); |
| |
| ret = ptrace (PTRACE_GETREGSET, tid, NT_PRSTATUS, &iovec); |
| if (ret < 0) |
| perror_with_name (_("Unable to fetch general registers")); |
| |
| if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32) |
| aarch32_gp_regcache_supply (regcache, (uint32_t *) regs, 1); |
| else |
| { |
| int regno; |
| |
| for (regno = AARCH64_X0_REGNUM; regno <= AARCH64_CPSR_REGNUM; regno++) |
| regcache->raw_supply (regno, ®s[regno - AARCH64_X0_REGNUM]); |
| } |
| } |
| |
| /* Store to the current thread the valid general-purpose register |
| values in the GDB's register array. */ |
| |
| static void |
| store_gregs_to_thread (const struct regcache *regcache) |
| { |
| int ret, tid; |
| elf_gregset_t regs; |
| struct iovec iovec; |
| struct gdbarch *gdbarch = regcache->arch (); |
| |
| /* Make sure REGS can hold all registers contents on both aarch64 |
| and arm. */ |
| static_assert (sizeof (regs) >= 18 * 4); |
| tid = regcache->ptid ().lwp (); |
| |
| iovec.iov_base = ®s; |
| if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32) |
| iovec.iov_len = 18 * 4; |
| else |
| iovec.iov_len = sizeof (regs); |
| |
| ret = ptrace (PTRACE_GETREGSET, tid, NT_PRSTATUS, &iovec); |
| if (ret < 0) |
| perror_with_name (_("Unable to fetch general registers")); |
| |
| if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32) |
| aarch32_gp_regcache_collect (regcache, (uint32_t *) regs, 1); |
| else |
| { |
| int regno; |
| |
| for (regno = AARCH64_X0_REGNUM; regno <= AARCH64_CPSR_REGNUM; regno++) |
| if (REG_VALID == regcache->get_register_status (regno)) |
| regcache->raw_collect (regno, ®s[regno - AARCH64_X0_REGNUM]); |
| } |
| |
| ret = ptrace (PTRACE_SETREGSET, tid, NT_PRSTATUS, &iovec); |
| if (ret < 0) |
| perror_with_name (_("Unable to store general registers")); |
| } |
| |
| /* Fill GDB's register array with the fp/simd register values |
| from the current thread. */ |
| |
| static void |
| fetch_fpregs_from_thread (struct regcache *regcache) |
| { |
| int ret, tid; |
| elf_fpregset_t regs; |
| struct iovec iovec; |
| struct gdbarch *gdbarch = regcache->arch (); |
| |
| /* Make sure REGS can hold all VFP registers contents on both aarch64 |
| and arm. */ |
| static_assert (sizeof regs >= ARM_VFP3_REGS_SIZE); |
| |
| tid = regcache->ptid ().lwp (); |
| |
| iovec.iov_base = ®s; |
| |
| if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32) |
| { |
| iovec.iov_len = ARM_VFP3_REGS_SIZE; |
| |
| ret = ptrace (PTRACE_GETREGSET, tid, NT_ARM_VFP, &iovec); |
| if (ret < 0) |
| perror_with_name (_("Unable to fetch VFP registers")); |
| |
| aarch32_vfp_regcache_supply (regcache, (gdb_byte *) ®s, 32); |
| } |
| else |
| { |
| int regno; |
| |
| iovec.iov_len = sizeof (regs); |
| |
| ret = ptrace (PTRACE_GETREGSET, tid, NT_FPREGSET, &iovec); |
| if (ret < 0) |
| perror_with_name (_("Unable to fetch vFP/SIMD registers")); |
| |
| for (regno = AARCH64_V0_REGNUM; regno <= AARCH64_V31_REGNUM; regno++) |
| regcache->raw_supply (regno, ®s.vregs[regno - AARCH64_V0_REGNUM]); |
| |
| regcache->raw_supply (AARCH64_FPSR_REGNUM, ®s.fpsr); |
| regcache->raw_supply (AARCH64_FPCR_REGNUM, ®s.fpcr); |
| } |
| } |
| |
| /* Store to the current thread the valid fp/simd register |
| values in the GDB's register array. */ |
| |
| static void |
| store_fpregs_to_thread (const struct regcache *regcache) |
| { |
| int ret, tid; |
| elf_fpregset_t regs; |
| struct iovec iovec; |
| struct gdbarch *gdbarch = regcache->arch (); |
| |
| /* Make sure REGS can hold all VFP registers contents on both aarch64 |
| and arm. */ |
| static_assert (sizeof regs >= ARM_VFP3_REGS_SIZE); |
| tid = regcache->ptid ().lwp (); |
| |
| iovec.iov_base = ®s; |
| |
| if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32) |
| { |
| iovec.iov_len = ARM_VFP3_REGS_SIZE; |
| |
| ret = ptrace (PTRACE_GETREGSET, tid, NT_ARM_VFP, &iovec); |
| if (ret < 0) |
| perror_with_name (_("Unable to fetch VFP registers")); |
| |
| aarch32_vfp_regcache_collect (regcache, (gdb_byte *) ®s, 32); |
| } |
| else |
| { |
| int regno; |
| |
| iovec.iov_len = sizeof (regs); |
| |
| ret = ptrace (PTRACE_GETREGSET, tid, NT_FPREGSET, &iovec); |
| if (ret < 0) |
| perror_with_name (_("Unable to fetch FP/SIMD registers")); |
| |
| for (regno = AARCH64_V0_REGNUM; regno <= AARCH64_V31_REGNUM; regno++) |
| if (REG_VALID == regcache->get_register_status (regno)) |
| regcache->raw_collect |
| (regno, (char *) ®s.vregs[regno - AARCH64_V0_REGNUM]); |
| |
| if (REG_VALID == regcache->get_register_status (AARCH64_FPSR_REGNUM)) |
| regcache->raw_collect (AARCH64_FPSR_REGNUM, (char *) ®s.fpsr); |
| if (REG_VALID == regcache->get_register_status (AARCH64_FPCR_REGNUM)) |
| regcache->raw_collect (AARCH64_FPCR_REGNUM, (char *) ®s.fpcr); |
| } |
| |
| if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32) |
| { |
| ret = ptrace (PTRACE_SETREGSET, tid, NT_ARM_VFP, &iovec); |
| if (ret < 0) |
| perror_with_name (_("Unable to store VFP registers")); |
| } |
| else |
| { |
| ret = ptrace (PTRACE_SETREGSET, tid, NT_FPREGSET, &iovec); |
| if (ret < 0) |
| perror_with_name (_("Unable to store FP/SIMD registers")); |
| } |
| } |
| |
| /* Fill GDB's REGCACHE with the valid SVE register values from the thread |
| associated with REGCACHE. |
| |
| This function handles reading data from SVE or SSVE states, depending |
| on which state is active at the moment. */ |
| |
| static void |
| fetch_sveregs_from_thread (struct regcache *regcache) |
| { |
| /* Fetch SVE state from the thread and copy it into the register cache. */ |
| aarch64_sve_regs_copy_to_reg_buf (regcache->ptid ().lwp (), regcache); |
| } |
| |
| /* Store the valid SVE register values from GDB's REGCACHE to the thread |
| associated with REGCACHE. |
| |
| This function handles writing data to SVE or SSVE states, depending |
| on which state is active at the moment. */ |
| |
| static void |
| store_sveregs_to_thread (struct regcache *regcache) |
| { |
| /* Fetch SVE state from the register cache and update the thread TID with |
| it. */ |
| aarch64_sve_regs_copy_from_reg_buf (regcache->ptid ().lwp (), regcache); |
| } |
| |
| /* Fill GDB's REGCACHE with the ZA register set contents from the |
| thread associated with REGCACHE. If there is no active ZA register state, |
| make the ZA register contents zero. */ |
| |
| static void |
| fetch_za_from_thread (struct regcache *regcache) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| |
| /* Read ZA state from the thread to the register cache. */ |
| aarch64_za_regs_copy_to_reg_buf (regcache->ptid ().lwp (), |
| regcache, |
| tdep->sme_za_regnum, |
| tdep->sme_svg_regnum, |
| tdep->sme_svcr_regnum); |
| } |
| |
| /* Store the NT_ARM_ZA register set contents from GDB's REGCACHE to the thread |
| associated with REGCACHE. */ |
| |
| static void |
| store_za_to_thread (struct regcache *regcache) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| |
| /* Write ZA state from the register cache to the thread. */ |
| aarch64_za_regs_copy_from_reg_buf (regcache->ptid ().lwp (), |
| regcache, |
| tdep->sme_za_regnum, |
| tdep->sme_svg_regnum, |
| tdep->sme_svcr_regnum); |
| } |
| |
| /* Fill GDB's REGCACHE with the ZT register set contents from the |
| thread associated with REGCACHE. If there is no active ZA register state, |
| make the ZT register contents zero. */ |
| |
| static void |
| fetch_zt_from_thread (struct regcache *regcache) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| |
| /* Read ZT state from the thread to the register cache. */ |
| aarch64_zt_regs_copy_to_reg_buf (regcache->ptid ().lwp (), |
| regcache, |
| tdep->sme2_zt0_regnum); |
| } |
| |
| /* Store the NT_ARM_ZT register set contents from GDB's REGCACHE to the |
| thread associated with REGCACHE. */ |
| |
| static void |
| store_zt_to_thread (struct regcache *regcache) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| |
| /* Write ZT state from the register cache to the thread. */ |
| aarch64_zt_regs_copy_from_reg_buf (regcache->ptid ().lwp (), |
| regcache, |
| tdep->sme2_zt0_regnum); |
| } |
| |
| /* Fill GDB's register array with the pointer authentication mask values from |
| the current thread. */ |
| |
| static void |
| fetch_pauth_masks_from_thread (struct regcache *regcache) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| int ret; |
| struct iovec iovec; |
| uint64_t pauth_regset[2] = {0, 0}; |
| int tid = regcache->ptid ().lwp (); |
| |
| iovec.iov_base = &pauth_regset; |
| iovec.iov_len = sizeof (pauth_regset); |
| |
| ret = ptrace (PTRACE_GETREGSET, tid, NT_ARM_PAC_MASK, &iovec); |
| if (ret != 0) |
| perror_with_name (_("unable to fetch pauth registers")); |
| |
| regcache->raw_supply (AARCH64_PAUTH_DMASK_REGNUM (tdep->pauth_reg_base), |
| &pauth_regset[0]); |
| regcache->raw_supply (AARCH64_PAUTH_CMASK_REGNUM (tdep->pauth_reg_base), |
| &pauth_regset[1]); |
| } |
| |
| /* Fill GDB's register array with the MTE register values from |
| the current thread. */ |
| |
| static void |
| fetch_mteregs_from_thread (struct regcache *regcache) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| int regno = tdep->mte_reg_base; |
| |
| gdb_assert (regno != -1); |
| |
| uint64_t tag_ctl = 0; |
| struct iovec iovec; |
| |
| iovec.iov_base = &tag_ctl; |
| iovec.iov_len = sizeof (tag_ctl); |
| |
| int tid = get_ptrace_pid (regcache->ptid ()); |
| if (ptrace (PTRACE_GETREGSET, tid, NT_ARM_TAGGED_ADDR_CTRL, &iovec) != 0) |
| perror_with_name (_("unable to fetch MTE registers")); |
| |
| regcache->raw_supply (regno, &tag_ctl); |
| } |
| |
| /* Store to the current thread the valid MTE register set in the GDB's |
| register array. */ |
| |
| static void |
| store_mteregs_to_thread (struct regcache *regcache) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| int regno = tdep->mte_reg_base; |
| |
| gdb_assert (regno != -1); |
| |
| uint64_t tag_ctl = 0; |
| |
| if (REG_VALID != regcache->get_register_status (regno)) |
| return; |
| |
| regcache->raw_collect (regno, (char *) &tag_ctl); |
| |
| struct iovec iovec; |
| |
| iovec.iov_base = &tag_ctl; |
| iovec.iov_len = sizeof (tag_ctl); |
| |
| int tid = get_ptrace_pid (regcache->ptid ()); |
| if (ptrace (PTRACE_SETREGSET, tid, NT_ARM_TAGGED_ADDR_CTRL, &iovec) != 0) |
| perror_with_name (_("unable to store MTE registers")); |
| } |
| |
| /* Fill GDB's register array with the TLS register values from |
| the current thread. */ |
| |
| static void |
| fetch_tlsregs_from_thread (struct regcache *regcache) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| int regno = tdep->tls_regnum_base; |
| |
| gdb_assert (regno != -1); |
| gdb_assert (tdep->tls_register_count > 0); |
| |
| std::vector<uint64_t> tpidrs (tdep->tls_register_count); |
| |
| struct iovec iovec; |
| iovec.iov_base = tpidrs.data (); |
| iovec.iov_len = tpidrs.size () * sizeof (tpidrs[0]); |
| |
| int tid = get_ptrace_pid (regcache->ptid ()); |
| if (ptrace (PTRACE_GETREGSET, tid, NT_ARM_TLS, &iovec) != 0) |
| perror_with_name (_("unable to fetch TLS registers")); |
| |
| for (int i = 0; i < tdep->tls_register_count; i++) |
| regcache->raw_supply (regno + i, &tpidrs[i]); |
| } |
| |
| /* Store to the current thread the valid TLS register set in GDB's |
| register array. */ |
| |
| static void |
| store_tlsregs_to_thread (struct regcache *regcache) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| int regno = tdep->tls_regnum_base; |
| |
| gdb_assert (regno != -1); |
| gdb_assert (tdep->tls_register_count > 0); |
| |
| std::vector<uint64_t> tpidrs (tdep->tls_register_count); |
| |
| for (int i = 0; i < tdep->tls_register_count; i++) |
| { |
| if (REG_VALID != regcache->get_register_status (regno + i)) |
| continue; |
| |
| regcache->raw_collect (regno + i, (char *) &tpidrs[i]); |
| } |
| |
| struct iovec iovec; |
| iovec.iov_base = tpidrs.data (); |
| iovec.iov_len = tpidrs.size () * sizeof (tpidrs[0]); |
| |
| int tid = get_ptrace_pid (regcache->ptid ()); |
| if (ptrace (PTRACE_SETREGSET, tid, NT_ARM_TLS, &iovec) != 0) |
| perror_with_name (_("unable to store TLS register")); |
| } |
| |
| /* The AArch64 version of the "fetch_registers" target_ops method. Fetch |
| REGNO from the target and place the result into REGCACHE. */ |
| |
| static void |
| aarch64_fetch_registers (struct regcache *regcache, int regno) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| |
| /* Do we need to fetch all registers? */ |
| if (regno == -1) |
| { |
| fetch_gregs_from_thread (regcache); |
| |
| /* We attempt to fetch SVE registers if there is support for either |
| SVE or SME (due to the SSVE state of SME). */ |
| if (tdep->has_sve () || tdep->has_sme ()) |
| fetch_sveregs_from_thread (regcache); |
| else |
| fetch_fpregs_from_thread (regcache); |
| |
| if (tdep->has_pauth ()) |
| fetch_pauth_masks_from_thread (regcache); |
| |
| if (tdep->has_mte ()) |
| fetch_mteregs_from_thread (regcache); |
| |
| if (tdep->has_tls ()) |
| fetch_tlsregs_from_thread (regcache); |
| |
| if (tdep->has_sme ()) |
| fetch_za_from_thread (regcache); |
| |
| if (tdep->has_sme2 ()) |
| fetch_zt_from_thread (regcache); |
| } |
| /* General purpose register? */ |
| else if (regno < AARCH64_V0_REGNUM) |
| fetch_gregs_from_thread (regcache); |
| /* SVE register? */ |
| else if ((tdep->has_sve () || tdep->has_sme ()) |
| && regno <= AARCH64_SVE_VG_REGNUM) |
| fetch_sveregs_from_thread (regcache); |
| /* FPSIMD register? */ |
| else if (regno <= AARCH64_FPCR_REGNUM) |
| fetch_fpregs_from_thread (regcache); |
| /* PAuth register? */ |
| else if (tdep->has_pauth () |
| && (regno == AARCH64_PAUTH_DMASK_REGNUM (tdep->pauth_reg_base) |
| || regno == AARCH64_PAUTH_CMASK_REGNUM (tdep->pauth_reg_base))) |
| fetch_pauth_masks_from_thread (regcache); |
| /* SME register? */ |
| else if (tdep->has_sme () && regno >= tdep->sme_reg_base |
| && regno < tdep->sme_reg_base + 3) |
| fetch_za_from_thread (regcache); |
| /* SME2 register? */ |
| else if (tdep->has_sme2 () && regno == tdep->sme2_zt0_regnum) |
| fetch_zt_from_thread (regcache); |
| /* MTE register? */ |
| else if (tdep->has_mte () |
| && (regno == tdep->mte_reg_base)) |
| fetch_mteregs_from_thread (regcache); |
| /* TLS register? */ |
| else if (tdep->has_tls () |
| && regno >= tdep->tls_regnum_base |
| && regno < tdep->tls_regnum_base + tdep->tls_register_count) |
| fetch_tlsregs_from_thread (regcache); |
| } |
| |
| /* A version of the "fetch_registers" target_ops method used when running |
| 32-bit ARM code on an AArch64 target. Fetch REGNO from the target and |
| place the result into REGCACHE. */ |
| |
| static void |
| aarch32_fetch_registers (struct regcache *regcache, int regno) |
| { |
| arm_gdbarch_tdep *tdep |
| = gdbarch_tdep<arm_gdbarch_tdep> (regcache->arch ()); |
| |
| if (regno == -1) |
| { |
| fetch_gregs_from_thread (regcache); |
| if (tdep->vfp_register_count > 0) |
| fetch_fpregs_from_thread (regcache); |
| } |
| else if (regno < ARM_F0_REGNUM || regno == ARM_PS_REGNUM) |
| fetch_gregs_from_thread (regcache); |
| else if (tdep->vfp_register_count > 0 |
| && regno >= ARM_D0_REGNUM |
| && (regno < ARM_D0_REGNUM + tdep->vfp_register_count |
| || regno == ARM_FPSCR_REGNUM)) |
| fetch_fpregs_from_thread (regcache); |
| } |
| |
| /* Implement the "fetch_registers" target_ops method. */ |
| |
| void |
| aarch64_linux_nat_target::fetch_registers (struct regcache *regcache, |
| int regno) |
| { |
| if (gdbarch_bfd_arch_info (regcache->arch ())->bits_per_word == 32) |
| aarch32_fetch_registers (regcache, regno); |
| else |
| aarch64_fetch_registers (regcache, regno); |
| } |
| |
| /* The AArch64 version of the "store_registers" target_ops method. Copy |
| the value of register REGNO from REGCACHE into the the target. */ |
| |
| static void |
| aarch64_store_registers (struct regcache *regcache, int regno) |
| { |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (regcache->arch ()); |
| |
| /* Do we need to store all registers? */ |
| if (regno == -1) |
| { |
| store_gregs_to_thread (regcache); |
| |
| /* We attempt to store SVE registers if there is support for either |
| SVE or SME (due to the SSVE state of SME). */ |
| if (tdep->has_sve () || tdep->has_sme ()) |
| store_sveregs_to_thread (regcache); |
| else |
| store_fpregs_to_thread (regcache); |
| |
| if (tdep->has_mte ()) |
| store_mteregs_to_thread (regcache); |
| |
| if (tdep->has_tls ()) |
| store_tlsregs_to_thread (regcache); |
| |
| if (tdep->has_sme ()) |
| store_za_to_thread (regcache); |
| |
| if (tdep->has_sme2 ()) |
| store_zt_to_thread (regcache); |
| } |
| /* General purpose register? */ |
| else if (regno < AARCH64_V0_REGNUM) |
| store_gregs_to_thread (regcache); |
| /* SVE register? */ |
| else if ((tdep->has_sve () || tdep->has_sme ()) |
| && regno <= AARCH64_SVE_VG_REGNUM) |
| store_sveregs_to_thread (regcache); |
| /* FPSIMD register? */ |
| else if (regno <= AARCH64_FPCR_REGNUM) |
| store_fpregs_to_thread (regcache); |
| /* SME register? */ |
| else if (tdep->has_sme () && regno >= tdep->sme_reg_base |
| && regno < tdep->sme_reg_base + 3) |
| store_za_to_thread (regcache); |
| else if (tdep->has_sme2 () && regno == tdep->sme2_zt0_regnum) |
| store_zt_to_thread (regcache); |
| /* MTE register? */ |
| else if (tdep->has_mte () |
| && (regno == tdep->mte_reg_base)) |
| store_mteregs_to_thread (regcache); |
| /* TLS register? */ |
| else if (tdep->has_tls () |
| && regno >= tdep->tls_regnum_base |
| && regno < tdep->tls_regnum_base + tdep->tls_register_count) |
| store_tlsregs_to_thread (regcache); |
| |
| /* PAuth registers are read-only. */ |
| } |
| |
| /* A version of the "store_registers" target_ops method used when running |
| 32-bit ARM code on an AArch64 target. Copy the value of register REGNO |
| from REGCACHE into the the target. */ |
| |
| static void |
| aarch32_store_registers (struct regcache *regcache, int regno) |
| { |
| arm_gdbarch_tdep *tdep |
| = gdbarch_tdep<arm_gdbarch_tdep> (regcache->arch ()); |
| |
| if (regno == -1) |
| { |
| store_gregs_to_thread (regcache); |
| if (tdep->vfp_register_count > 0) |
| store_fpregs_to_thread (regcache); |
| } |
| else if (regno < ARM_F0_REGNUM || regno == ARM_PS_REGNUM) |
| store_gregs_to_thread (regcache); |
| else if (tdep->vfp_register_count > 0 |
| && regno >= ARM_D0_REGNUM |
| && (regno < ARM_D0_REGNUM + tdep->vfp_register_count |
| || regno == ARM_FPSCR_REGNUM)) |
| store_fpregs_to_thread (regcache); |
| } |
| |
| /* Implement the "store_registers" target_ops method. */ |
| |
| void |
| aarch64_linux_nat_target::store_registers (struct regcache *regcache, |
| int regno) |
| { |
| if (gdbarch_bfd_arch_info (regcache->arch ())->bits_per_word == 32) |
| aarch32_store_registers (regcache, regno); |
| else |
| aarch64_store_registers (regcache, regno); |
| } |
| |
| /* Fill register REGNO (if it is a general-purpose register) in |
| *GREGSETPS with the value in GDB's register array. If REGNO is -1, |
| do this for all registers. */ |
| |
| void |
| fill_gregset (const struct regcache *regcache, |
| gdb_gregset_t *gregsetp, int regno) |
| { |
| regcache_collect_regset (&aarch64_linux_gregset, regcache, |
| regno, (gdb_byte *) gregsetp, |
| AARCH64_LINUX_SIZEOF_GREGSET); |
| } |
| |
| /* Fill GDB's register array with the general-purpose register values |
| in *GREGSETP. */ |
| |
| void |
| supply_gregset (struct regcache *regcache, const gdb_gregset_t *gregsetp) |
| { |
| regcache_supply_regset (&aarch64_linux_gregset, regcache, -1, |
| (const gdb_byte *) gregsetp, |
| AARCH64_LINUX_SIZEOF_GREGSET); |
| } |
| |
| /* Fill register REGNO (if it is a floating-point register) in |
| *FPREGSETP with the value in GDB's register array. If REGNO is -1, |
| do this for all registers. */ |
| |
| void |
| fill_fpregset (const struct regcache *regcache, |
| gdb_fpregset_t *fpregsetp, int regno) |
| { |
| regcache_collect_regset (&aarch64_linux_fpregset, regcache, |
| regno, (gdb_byte *) fpregsetp, |
| AARCH64_LINUX_SIZEOF_FPREGSET); |
| } |
| |
| /* Fill GDB's register array with the floating-point register values |
| in *FPREGSETP. */ |
| |
| void |
| supply_fpregset (struct regcache *regcache, const gdb_fpregset_t *fpregsetp) |
| { |
| regcache_supply_regset (&aarch64_linux_fpregset, regcache, -1, |
| (const gdb_byte *) fpregsetp, |
| AARCH64_LINUX_SIZEOF_FPREGSET); |
| } |
| |
| /* linux_nat_new_fork hook. */ |
| |
| void |
| aarch64_linux_nat_target::low_new_fork (struct lwp_info *parent, |
| pid_t child_pid) |
| { |
| pid_t parent_pid; |
| struct aarch64_debug_reg_state *parent_state; |
| struct aarch64_debug_reg_state *child_state; |
| |
| /* NULL means no watchpoint has ever been set in the parent. In |
| that case, there's nothing to do. */ |
| if (parent->arch_private == NULL) |
| return; |
| |
| /* GDB core assumes the child inherits the watchpoints/hw |
| breakpoints of the parent, and will remove them all from the |
| forked off process. Copy the debug registers mirrors into the |
| new process so that all breakpoints and watchpoints can be |
| removed together. */ |
| |
| parent_pid = parent->ptid.pid (); |
| parent_state = aarch64_get_debug_reg_state (parent_pid); |
| child_state = aarch64_get_debug_reg_state (child_pid); |
| *child_state = *parent_state; |
| } |
| |
| |
| /* Called by libthread_db. Returns a pointer to the thread local |
| storage (or its descriptor). */ |
| |
| ps_err_e |
| ps_get_thread_area (struct ps_prochandle *ph, |
| lwpid_t lwpid, int idx, void **base) |
| { |
| gdbarch *arch = current_inferior ()->arch (); |
| int is_64bit_p = (gdbarch_bfd_arch_info (arch)->bits_per_word == 64); |
| |
| return aarch64_ps_get_thread_area (ph, lwpid, idx, base, is_64bit_p); |
| } |
| |
| |
| /* Implement the "low_init_process" target_ops method. */ |
| |
| void |
| aarch64_linux_nat_target::low_init_process (pid_t pid) |
| { |
| low_forget_process (pid); |
| /* Set the hardware debug register capacity. This requires the process to be |
| ptrace-stopped, otherwise detection will fail and software watchpoints will |
| be used instead of hardware. If we allow this to be done lazily, we |
| cannot guarantee that it's called when the process is ptrace-stopped, so |
| do it now. */ |
| aarch64_linux_get_debug_reg_capacity (pid); |
| } |
| |
| /* Implement the "read_description" target_ops method. */ |
| |
| const struct target_desc * |
| aarch64_linux_nat_target::read_description () |
| { |
| int ret, tid; |
| gdb_byte regbuf[ARM_VFP3_REGS_SIZE]; |
| struct iovec iovec; |
| |
| if (inferior_ptid == null_ptid) |
| return this->beneath ()->read_description (); |
| |
| tid = inferior_ptid.pid (); |
| |
| iovec.iov_base = regbuf; |
| iovec.iov_len = ARM_VFP3_REGS_SIZE; |
| |
| ret = ptrace (PTRACE_GETREGSET, tid, NT_ARM_VFP, &iovec); |
| if (ret == 0) |
| return aarch32_read_description (false); |
| |
| CORE_ADDR hwcap = linux_get_hwcap (); |
| CORE_ADDR hwcap2 = linux_get_hwcap2 (); |
| |
| aarch64_features features; |
| /* SVE/SSVE check. Reading VQ may return either the regular vector length |
| or the streaming vector length, depending on whether streaming mode is |
| active or not. */ |
| features.vq = aarch64_sve_get_vq (tid); |
| features.pauth = hwcap & AARCH64_HWCAP_PACA; |
| features.mte = hwcap2 & HWCAP2_MTE; |
| features.tls = aarch64_tls_register_count (tid); |
| /* SME feature check. */ |
| features.svq = aarch64_za_get_svq (tid); |
| |
| /* Check for SME2 support. */ |
| if ((hwcap2 & HWCAP2_SME2) || (hwcap2 & HWCAP2_SME2P1)) |
| features.sme2 = supports_zt_registers (tid); |
| |
| return aarch64_read_description (features); |
| } |
| |
| /* Convert a native/host siginfo object, into/from the siginfo in the |
| layout of the inferiors' architecture. Returns true if any |
| conversion was done; false otherwise. If DIRECTION is 1, then copy |
| from INF to NATIVE. If DIRECTION is 0, copy from NATIVE to |
| INF. */ |
| |
| bool |
| aarch64_linux_nat_target::low_siginfo_fixup (siginfo_t *native, gdb_byte *inf, |
| int direction) |
| { |
| struct gdbarch *gdbarch = get_frame_arch (get_current_frame ()); |
| |
| /* Is the inferior 32-bit? If so, then do fixup the siginfo |
| object. */ |
| if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32) |
| { |
| if (direction == 0) |
| aarch64_compat_siginfo_from_siginfo ((struct compat_siginfo *) inf, |
| native); |
| else |
| aarch64_siginfo_from_compat_siginfo (native, |
| (struct compat_siginfo *) inf); |
| |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* Implement the "stopped_data_address" target_ops method. */ |
| |
| bool |
| aarch64_linux_nat_target::stopped_data_address (CORE_ADDR *addr_p) |
| { |
| siginfo_t siginfo; |
| struct aarch64_debug_reg_state *state; |
| |
| if (!linux_nat_get_siginfo (inferior_ptid, &siginfo)) |
| return false; |
| |
| /* This must be a hardware breakpoint. */ |
| if (siginfo.si_signo != SIGTRAP |
| || (siginfo.si_code & 0xffff) != TRAP_HWBKPT) |
| return false; |
| |
| /* Make sure to ignore the top byte, otherwise we may not recognize a |
| hardware watchpoint hit. The stopped data addresses coming from the |
| kernel can potentially be tagged addresses. */ |
| struct gdbarch *gdbarch = thread_architecture (inferior_ptid); |
| const CORE_ADDR addr_trap |
| = gdbarch_remove_non_address_bits (gdbarch, (CORE_ADDR) siginfo.si_addr); |
| |
| /* Check if the address matches any watched address. */ |
| state = aarch64_get_debug_reg_state (inferior_ptid.pid ()); |
| return aarch64_stopped_data_address (state, addr_trap, addr_p); |
| } |
| |
| /* Implement the "stopped_by_watchpoint" target_ops method. */ |
| |
| bool |
| aarch64_linux_nat_target::stopped_by_watchpoint () |
| { |
| return stopped_data_address (nullptr); |
| } |
| |
| /* Implement the "can_do_single_step" target_ops method. */ |
| |
| int |
| aarch64_linux_nat_target::can_do_single_step () |
| { |
| return 1; |
| } |
| |
| /* Implement the "thread_architecture" target_ops method. |
| |
| Returns the gdbarch for the thread identified by PTID. If the thread in |
| question is a 32-bit ARM thread, then the architecture returned will be |
| that of the process itself. |
| |
| If the thread is an AArch64 thread then we need to check the current |
| vector length; if the vector length has changed then we need to lookup a |
| new gdbarch that matches the new vector length. */ |
| |
| struct gdbarch * |
| aarch64_linux_nat_target::thread_architecture (ptid_t ptid) |
| { |
| /* Find the current gdbarch the same way as process_stratum_target. */ |
| inferior *inf = find_inferior_ptid (this, ptid); |
| gdb_assert (inf != NULL); |
| |
| /* If this is a 32-bit architecture, then this is ARM, not AArch64. |
| There's no SVE vectors here, so just return the inferior |
| architecture. */ |
| if (gdbarch_bfd_arch_info (inf->arch ())->bits_per_word == 32) |
| return inf->arch (); |
| |
| /* Only return the inferior's gdbarch if both vq and svq match the ones in |
| the tdep. */ |
| aarch64_gdbarch_tdep *tdep |
| = gdbarch_tdep<aarch64_gdbarch_tdep> (inf->arch ()); |
| uint64_t vq = aarch64_sve_get_vq (ptid.lwp ()); |
| uint64_t svq = aarch64_za_get_svq (ptid.lwp ()); |
| if (vq == tdep->vq && svq == tdep->sme_svq) |
| return inf->arch (); |
| |
| /* We reach here if any vector length for the thread is different from its |
| value at process start. Lookup gdbarch via info (potentially creating a |
| new one) by using a target description that corresponds to the new vq/svq |
| value and the current architecture features. */ |
| |
| const struct target_desc *tdesc = gdbarch_target_desc (inf->arch ()); |
| aarch64_features features = aarch64_features_from_target_desc (tdesc); |
| features.vq = vq; |
| features.svq = svq; |
| |
| /* Check for the SME2 feature. */ |
| features.sme2 = supports_zt_registers (ptid.lwp ()); |
| |
| struct gdbarch_info info; |
| info.bfd_arch_info = bfd_lookup_arch (bfd_arch_aarch64, bfd_mach_aarch64); |
| info.target_desc = aarch64_read_description (features); |
| return gdbarch_find_by_info (info); |
| } |
| |
| /* Implement the "supports_memory_tagging" target_ops method. */ |
| |
| bool |
| aarch64_linux_nat_target::supports_memory_tagging () |
| { |
| return (linux_get_hwcap2 () & HWCAP2_MTE) != 0; |
| } |
| |
| /* Implement the "fetch_memtags" target_ops method. */ |
| |
| bool |
| aarch64_linux_nat_target::fetch_memtags (CORE_ADDR address, size_t len, |
| gdb::byte_vector &tags, int type) |
| { |
| int tid = get_ptrace_pid (inferior_ptid); |
| |
| /* Allocation tags? */ |
| if (type == static_cast<int> (aarch64_memtag_type::mte_allocation)) |
| return aarch64_mte_fetch_memtags (tid, address, len, tags); |
| |
| return false; |
| } |
| |
| /* Implement the "store_memtags" target_ops method. */ |
| |
| bool |
| aarch64_linux_nat_target::store_memtags (CORE_ADDR address, size_t len, |
| const gdb::byte_vector &tags, int type) |
| { |
| int tid = get_ptrace_pid (inferior_ptid); |
| |
| /* Allocation tags? */ |
| if (type == static_cast<int> (aarch64_memtag_type::mte_allocation)) |
| return aarch64_mte_store_memtags (tid, address, len, tags); |
| |
| return false; |
| } |
| |
| bool |
| aarch64_linux_nat_target::is_address_tagged (gdbarch *gdbarch, CORE_ADDR address) |
| { |
| /* Here we take a detour going to linux-tdep layer to read the smaps file, |
| because currently there isn't a better way to get that information to |
| check if a given address is tagged or not. |
| |
| In the future, if this check is made, for instance, available via PTRACE, |
| it will be possible to drop the smaps path in favor of a PTRACE one for |
| this check. */ |
| return gdbarch_tagged_address_p (gdbarch, address); |
| } |
| |
| void _initialize_aarch64_linux_nat (); |
| void |
| _initialize_aarch64_linux_nat () |
| { |
| aarch64_initialize_hw_point (); |
| |
| /* Register the target. */ |
| linux_target = &the_aarch64_linux_nat_target; |
| add_inf_child_target (&the_aarch64_linux_nat_target); |
| } |