Google Git
Sign in
gnu / binutils-gdb / 41e27f512a5123bc28e982264b9ceb3b78e6da85 / . / binutils / binutils.info-1
blob: c5ba515c9927058a0ea28087d5345cfa587de160 [file] [log] [blame]
This is binutils.info, produced by makeinfo version 4.0 from
binutils.texi.
START-INFO-DIR-ENTRY
* Binutils: (binutils). The GNU binary utilities.
* ar: (binutils)ar. Create, modify, and extract from archives
* nm: (binutils)nm. List symbols from object files
* objcopy: (binutils)objcopy. Copy and translate object files
* objdump: (binutils)objdump. Display information from object files
* ranlib: (binutils)ranlib. Generate index to archive contents
* readelf: (binutils)readelf. Display the contents of ELF format files.
* size: (binutils)size. List section sizes and total size
* strings: (binutils)strings. List printable strings from files
* strip: (binutils)strip. Discard symbols
* c++filt: (binutils)c++filt. Filter to demangle encoded C++ symbols
* cxxfilt: (binutils)c++filt. MS-DOS name for c++filt
* addr2line: (binutils)addr2line. Convert addresses to file and line
* nlmconv: (binutils)nlmconv. Converts object code into an NLM
* windres: (binutils)windres. Manipulate Windows resources
* dlltool: (binutils)dlltool. Create files needed to build and use DLLs
END-INFO-DIR-ENTRY
Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001 Free
Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1
or any later version published by the Free Software Foundation;
with no Invariant Sections, with no Front-Cover Texts, and with no
Back-Cover Texts. A copy of the license is included in the
section entitled "GNU Free Documentation License".

File: binutils.info, Node: Top, Next: ar, Up: (dir)
Introduction
************
This brief manual contains preliminary documentation for the GNU
binary utilities (collectively version 2.11.2):
This document is distributed under the terms of the GNU Free
Documentation License. A copy of the license is included in the
section entitled "GNU Free Documentation License".
* Menu:
* ar:: Create, modify, and extract from archives
* nm:: List symbols from object files
* objcopy:: Copy and translate object files
* objdump:: Display information from object files
* ranlib:: Generate index to archive contents
* readelf:: Display the contents of ELF format files.
* size:: List section sizes and total size
* strings:: List printable strings from files
* strip:: Discard symbols
* c++filt:: Filter to demangle encoded C++ symbols
* cxxfilt: c++filt. MS-DOS name for c++filt
* addr2line:: Convert addresses to file and line
* nlmconv:: Converts object code into an NLM
* windres:: Manipulate Windows resources
* dlltool:: Create files needed to build and use DLLs
* Selecting The Target System:: How these utilities determine the target.
* Reporting Bugs:: Reporting Bugs
* GNU Free Documentation License:: GNU Free Documentation License
* Index:: Index

File: binutils.info, Node: ar, Next: nm, Prev: Top, Up: Top
ar
**
ar [-]P[MOD [RELPOS] [COUNT]] ARCHIVE [MEMBER...]
ar -M [ <mri-script ]
The GNU `ar' program creates, modifies, and extracts from archives.
An "archive" is a single file holding a collection of other files in a
structure that makes it possible to retrieve the original individual
files (called "members" of the archive).
The original files' contents, mode (permissions), timestamp, owner,
and group are preserved in the archive, and can be restored on
extraction.
GNU `ar' can maintain archives whose members have names of any
length; however, depending on how `ar' is configured on your system, a
limit on member-name length may be imposed for compatibility with
archive formats maintained with other tools. If it exists, the limit
is often 15 characters (typical of formats related to a.out) or 16
characters (typical of formats related to coff).
`ar' is considered a binary utility because archives of this sort
are most often used as "libraries" holding commonly needed subroutines.
`ar' creates an index to the symbols defined in relocatable object
modules in the archive when you specify the modifier `s'. Once
created, this index is updated in the archive whenever `ar' makes a
change to its contents (save for the `q' update operation). An archive
with such an index speeds up linking to the library, and allows
routines in the library to call each other without regard to their
placement in the archive.
You may use `nm -s' or `nm --print-armap' to list this index table.
If an archive lacks the table, another form of `ar' called `ranlib' can
be used to add just the table.
GNU `ar' is designed to be compatible with two different facilities.
You can control its activity using command-line options, like the
different varieties of `ar' on Unix systems; or, if you specify the
single command-line option `-M', you can control it with a script
supplied via standard input, like the MRI "librarian" program.
* Menu:
* ar cmdline:: Controlling `ar' on the command line
* ar scripts:: Controlling `ar' with a script

File: binutils.info, Node: ar cmdline, Next: ar scripts, Up: ar
Controlling `ar' on the command line
====================================
ar [-X32_64] [-]P[MOD [RELPOS] [COUNT]] ARCHIVE [MEMBER...]
When you use `ar' in the Unix style, `ar' insists on at least two
arguments to execute: one keyletter specifying the _operation_
(optionally accompanied by other keyletters specifying _modifiers_),
and the archive name to act on.
Most operations can also accept further MEMBER arguments, specifying
particular files to operate on.
GNU `ar' allows you to mix the operation code P and modifier flags
MOD in any order, within the first command-line argument.
If you wish, you may begin the first command-line argument with a
dash.
The P keyletter specifies what operation to execute; it may be any
of the following, but you must specify only one of them:
`d'
_Delete_ modules from the archive. Specify the names of modules to
be deleted as MEMBER...; the archive is untouched if you specify
no files to delete.
If you specify the `v' modifier, `ar' lists each module as it is
deleted.
`m'
Use this operation to _move_ members in an archive.
The ordering of members in an archive can make a difference in how
programs are linked using the library, if a symbol is defined in
more than one member.
If no modifiers are used with `m', any members you name in the
MEMBER arguments are moved to the _end_ of the archive; you can
use the `a', `b', or `i' modifiers to move them to a specified
place instead.
`p'
_Print_ the specified members of the archive, to the standard
output file. If the `v' modifier is specified, show the member
name before copying its contents to standard output.
If you specify no MEMBER arguments, all the files in the archive
are printed.
`q'
_Quick append_; Historically, add the files MEMBER... to the end of
ARCHIVE, without checking for replacement.
The modifiers `a', `b', and `i' do _not_ affect this operation;
new members are always placed at the end of the archive.
The modifier `v' makes `ar' list each file as it is appended.
Since the point of this operation is speed, the archive's symbol
table index is not updated, even if it already existed; you can
use `ar s' or `ranlib' explicitly to update the symbol table index.
However, too many different systems assume quick append rebuilds
the index, so GNU ar implements `q' as a synonym for `r'.
`r'
Insert the files MEMBER... into ARCHIVE (with _replacement_). This
operation differs from `q' in that any previously existing members
are deleted if their names match those being added.
If one of the files named in MEMBER... does not exist, `ar'
displays an error message, and leaves undisturbed any existing
members of the archive matching that name.
By default, new members are added at the end of the file; but you
may use one of the modifiers `a', `b', or `i' to request placement
relative to some existing member.
The modifier `v' used with this operation elicits a line of output
for each file inserted, along with one of the letters `a' or `r'
to indicate whether the file was appended (no old member deleted)
or replaced.
`t'
Display a _table_ listing the contents of ARCHIVE, or those of the
files listed in MEMBER... that are present in the archive.
Normally only the member name is shown; if you also want to see
the modes (permissions), timestamp, owner, group, and size, you can
request that by also specifying the `v' modifier.
If you do not specify a MEMBER, all files in the archive are
listed.
If there is more than one file with the same name (say, `fie') in
an archive (say `b.a'), `ar t b.a fie' lists only the first
instance; to see them all, you must ask for a complete listing--in
our example, `ar t b.a'.
`x'
_Extract_ members (named MEMBER) from the archive. You can use
the `v' modifier with this operation, to request that `ar' list
each name as it extracts it.
If you do not specify a MEMBER, all files in the archive are
extracted.
A number of modifiers (MOD) may immediately follow the P keyletter,
to specify variations on an operation's behavior:
`a'
Add new files _after_ an existing member of the archive. If you
use the modifier `a', the name of an existing archive member must
be present as the RELPOS argument, before the ARCHIVE
specification.
`b'
Add new files _before_ an existing member of the archive. If you
use the modifier `b', the name of an existing archive member must
be present as the RELPOS argument, before the ARCHIVE
specification. (same as `i').
`c'
_Create_ the archive. The specified ARCHIVE is always created if
it did not exist, when you request an update. But a warning is
issued unless you specify in advance that you expect to create it,
by using this modifier.
`f'
Truncate names in the archive. GNU `ar' will normally permit file
names of any length. This will cause it to create archives which
are not compatible with the native `ar' program on some systems.
If this is a concern, the `f' modifier may be used to truncate file
names when putting them in the archive.
`i'
Insert new files _before_ an existing member of the archive. If
you use the modifier `i', the name of an existing archive member
must be present as the RELPOS argument, before the ARCHIVE
specification. (same as `b').
`l'
This modifier is accepted but not used.
`N'
Uses the COUNT parameter. This is used if there are multiple
entries in the archive with the same name. Extract or delete
instance COUNT of the given name from the archive.
`o'
Preserve the _original_ dates of members when extracting them. If
you do not specify this modifier, files extracted from the archive
are stamped with the time of extraction.
`P'
Use the full path name when matching names in the archive. GNU
`ar' can not create an archive with a full path name (such archives
are not POSIX complaint), but other archive creators can. This
option will cause GNU `ar' to match file names using a complete
path name, which can be convenient when extracting a single file
from an archive created by another tool.
`s'
Write an object-file index into the archive, or update an existing
one, even if no other change is made to the archive. You may use
this modifier flag either with any operation, or alone. Running
`ar s' on an archive is equivalent to running `ranlib' on it.
`S'
Do not generate an archive symbol table. This can speed up
building a large library in several steps. The resulting archive
can not be used with the linker. In order to build a symbol
table, you must omit the `S' modifier on the last execution of
`ar', or you must run `ranlib' on the archive.
`u'
Normally, `ar r'... inserts all files listed into the archive. If
you would like to insert _only_ those of the files you list that
are newer than existing members of the same names, use this
modifier. The `u' modifier is allowed only for the operation `r'
(replace). In particular, the combination `qu' is not allowed,
since checking the timestamps would lose any speed advantage from
the operation `q'.
`v'
This modifier requests the _verbose_ version of an operation. Many
operations display additional information, such as filenames
processed, when the modifier `v' is appended.
`V'
This modifier shows the version number of `ar'.
`ar' ignores an initial option spelt `-X32_64', for compatibility
with AIX. The behaviour produced by this option is the default for GNU
`ar'. `ar' does not support any of the other `-X' options; in
particular, it does not support `-X32' which is the default for AIX
`ar'.

File: binutils.info, Node: ar scripts, Prev: ar cmdline, Up: ar
Controlling `ar' with a script
==============================
ar -M [ <SCRIPT ]
If you use the single command-line option `-M' with `ar', you can
control its operation with a rudimentary command language. This form
of `ar' operates interactively if standard input is coming directly
from a terminal. During interactive use, `ar' prompts for input (the
prompt is `AR >'), and continues executing even after errors. If you
redirect standard input to a script file, no prompts are issued, and
`ar' abandons execution (with a nonzero exit code) on any error.
The `ar' command language is _not_ designed to be equivalent to the
command-line options; in fact, it provides somewhat less control over
archives. The only purpose of the command language is to ease the
transition to GNU `ar' for developers who already have scripts written
for the MRI "librarian" program.
The syntax for the `ar' command language is straightforward:
* commands are recognized in upper or lower case; for example, `LIST'
is the same as `list'. In the following descriptions, commands are
shown in upper case for clarity.
* a single command may appear on each line; it is the first word on
the line.
* empty lines are allowed, and have no effect.
* comments are allowed; text after either of the characters `*' or
`;' is ignored.
* Whenever you use a list of names as part of the argument to an `ar'
command, you can separate the individual names with either commas
or blanks. Commas are shown in the explanations below, for
clarity.
* `+' is used as a line continuation character; if `+' appears at
the end of a line, the text on the following line is considered
part of the current command.
Here are the commands you can use in `ar' scripts, or when using
`ar' interactively. Three of them have special significance:
`OPEN' or `CREATE' specify a "current archive", which is a temporary
file required for most of the other commands.
`SAVE' commits the changes so far specified by the script. Prior to
`SAVE', commands affect only the temporary copy of the current archive.
`ADDLIB ARCHIVE'
`ADDLIB ARCHIVE (MODULE, MODULE, ... MODULE)'
Add all the contents of ARCHIVE (or, if specified, each named
MODULE from ARCHIVE) to the current archive.
Requires prior use of `OPEN' or `CREATE'.
`ADDMOD MEMBER, MEMBER, ... MEMBER'
Add each named MEMBER as a module in the current archive.
Requires prior use of `OPEN' or `CREATE'.
`CLEAR'
Discard the contents of the current archive, canceling the effect
of any operations since the last `SAVE'. May be executed (with no
effect) even if no current archive is specified.
`CREATE ARCHIVE'
Creates an archive, and makes it the current archive (required for
many other commands). The new archive is created with a temporary
name; it is not actually saved as ARCHIVE until you use `SAVE'.
You can overwrite existing archives; similarly, the contents of any
existing file named ARCHIVE will not be destroyed until `SAVE'.
`DELETE MODULE, MODULE, ... MODULE'
Delete each listed MODULE from the current archive; equivalent to
`ar -d ARCHIVE MODULE ... MODULE'.
Requires prior use of `OPEN' or `CREATE'.
`DIRECTORY ARCHIVE (MODULE, ... MODULE)'
`DIRECTORY ARCHIVE (MODULE, ... MODULE) OUTPUTFILE'
List each named MODULE present in ARCHIVE. The separate command
`VERBOSE' specifies the form of the output: when verbose output is
off, output is like that of `ar -t ARCHIVE MODULE...'. When
verbose output is on, the listing is like `ar -tv ARCHIVE
MODULE...'.
Output normally goes to the standard output stream; however, if you
specify OUTPUTFILE as a final argument, `ar' directs the output to
that file.
`END'
Exit from `ar', with a `0' exit code to indicate successful
completion. This command does not save the output file; if you
have changed the current archive since the last `SAVE' command,
those changes are lost.
`EXTRACT MODULE, MODULE, ... MODULE'
Extract each named MODULE from the current archive, writing them
into the current directory as separate files. Equivalent to `ar -x
ARCHIVE MODULE...'.
Requires prior use of `OPEN' or `CREATE'.
`LIST'
Display full contents of the current archive, in "verbose" style
regardless of the state of `VERBOSE'. The effect is like `ar tv
ARCHIVE'. (This single command is a GNU `ar' enhancement, rather
than present for MRI compatibility.)
Requires prior use of `OPEN' or `CREATE'.
`OPEN ARCHIVE'
Opens an existing archive for use as the current archive (required
for many other commands). Any changes as the result of subsequent
commands will not actually affect ARCHIVE until you next use
`SAVE'.
`REPLACE MODULE, MODULE, ... MODULE'
In the current archive, replace each existing MODULE (named in the
`REPLACE' arguments) from files in the current working directory.
To execute this command without errors, both the file, and the
module in the current archive, must exist.
Requires prior use of `OPEN' or `CREATE'.
`VERBOSE'
Toggle an internal flag governing the output from `DIRECTORY'.
When the flag is on, `DIRECTORY' output matches output from `ar
-tv '....
`SAVE'
Commit your changes to the current archive, and actually save it
as a file with the name specified in the last `CREATE' or `OPEN'
command.
Requires prior use of `OPEN' or `CREATE'.

File: binutils.info, Node: nm, Next: objcopy, Prev: ar, Up: Top
nm
**
nm [ -a | --debug-syms ] [ -g | --extern-only ]
[ -B ] [ -C | --demangle[=STYLE] ] [ -D | --dynamic ]
[ -s | --print-armap ] [ -A | -o | --print-file-name ]
[ -n | -v | --numeric-sort ] [ -p | --no-sort ]
[ -r | --reverse-sort ] [ --size-sort ] [ -u | --undefined-only ]
[ -t RADIX | --radix=RADIX ] [ -P | --portability ]
[ --target=BFDNAME ] [ -f FORMAT | --format=FORMAT ]
[ --defined-only ] [-l | --line-numbers ] [ --no-demangle ]
[ -V | --version ] [ -X 32_64 ] [ --help ] [ OBJFILE... ]
GNU `nm' lists the symbols from object files OBJFILE.... If no
object files are listed as arguments, `nm' assumes the file `a.out'.
For each symbol, `nm' shows:
* The symbol value, in the radix selected by options (see below), or
hexadecimal by default.
* The symbol type. At least the following types are used; others
are, as well, depending on the object file format. If lowercase,
the symbol is local; if uppercase, the symbol is global (external).
`A'
The symbol's value is absolute, and will not be changed by
further linking.
`B'
The symbol is in the uninitialized data section (known as
BSS).
`C'
The symbol is common. Common symbols are uninitialized data.
When linking, multiple common symbols may appear with the
same name. If the symbol is defined anywhere, the common
symbols are treated as undefined references. For more
details on common symbols, see the discussion of -warn-common
in *Note Linker options: (ld.info)Options.
`D'
The symbol is in the initialized data section.
`G'
The symbol is in an initialized data section for small
objects. Some object file formats permit more efficient
access to small data objects, such as a global int variable
as opposed to a large global array.
`I'
The symbol is an indirect reference to another symbol. This
is a GNU extension to the a.out object file format which is
rarely used.
`N'
The symbol is a debugging symbol.
`R'
The symbol is in a read only data section.
`S'
The symbol is in an uninitialized data section for small
objects.
`T'
The symbol is in the text (code) section.
`U'
The symbol is undefined.
`V'
The symbol is a weak object. When a weak defined symbol is
linked with a normal defined symbol, the normal defined
symbol is used with no error. When a weak undefined symbol
is linked and the symbol is not defined, the value of the
weak symbol becomes zero with no error.
`W'
The symbol is a weak symbol that has not been specifically
tagged as a weak object symbol. When a weak defined symbol
is linked with a normal defined symbol, the normal defined
symbol is used with no error. When a weak undefined symbol
is linked and the symbol is not defined, the value of the
weak symbol becomes zero with no error.
`-'
The symbol is a stabs symbol in an a.out object file. In
this case, the next values printed are the stabs other field,
the stabs desc field, and the stab type. Stabs symbols are
used to hold debugging information; for more information, see
*Note Stabs: (stabs.info)Top.
`?'
The symbol type is unknown, or object file format specific.
* The symbol name.
The long and short forms of options, shown here as alternatives, are
equivalent.
`-A'
`-o'
`--print-file-name'
Precede each symbol by the name of the input file (or archive
member) in which it was found, rather than identifying the input
file once only, before all of its symbols.
`-a'
`--debug-syms'
Display all symbols, even debugger-only symbols; normally these
are not listed.
`-B'
The same as `--format=bsd' (for compatibility with the MIPS `nm').
`-C'
`--demangle[=STYLE]'
Decode ("demangle") low-level symbol names into user-level names.
Besides removing any initial underscore prepended by the system,
this makes C++ function names readable. Different compilers have
different mangling styles. The optional demangling style argument
can be used to choose an appropriate demangling style for your
compiler. *Note c++filt::, for more information on demangling.
`--no-demangle'
Do not demangle low-level symbol names. This is the default.
`-D'
`--dynamic'
Display the dynamic symbols rather than the normal symbols. This
is only meaningful for dynamic objects, such as certain types of
shared libraries.
`-f FORMAT'
`--format=FORMAT'
Use the output format FORMAT, which can be `bsd', `sysv', or
`posix'. The default is `bsd'. Only the first character of
FORMAT is significant; it can be either upper or lower case.
`-g'
`--extern-only'
Display only external symbols.
`-l'
`--line-numbers'
For each symbol, use debugging information to try to find a
filename and line number. For a defined symbol, look for the line
number of the address of the symbol. For an undefined symbol,
look for the line number of a relocation entry which refers to the
symbol. If line number information can be found, print it after
the other symbol information.
`-n'
`-v'
`--numeric-sort'
Sort symbols numerically by their addresses, rather than
alphabetically by their names.
`-p'
`--no-sort'
Do not bother to sort the symbols in any order; print them in the
order encountered.
`-P'
`--portability'
Use the POSIX.2 standard output format instead of the default
format. Equivalent to `-f posix'.
`-s'
`--print-armap'
When listing symbols from archive members, include the index: a
mapping (stored in the archive by `ar' or `ranlib') of which
modules contain definitions for which names.
`-r'
`--reverse-sort'
Reverse the order of the sort (whether numeric or alphabetic); let
the last come first.
`--size-sort'
Sort symbols by size. The size is computed as the difference
between the value of the symbol and the value of the symbol with
the next higher value. The size of the symbol is printed, rather
than the value.
`-t RADIX'
`--radix=RADIX'
Use RADIX as the radix for printing the symbol values. It must be
`d' for decimal, `o' for octal, or `x' for hexadecimal.
`--target=BFDNAME'
Specify an object code format other than your system's default
format. *Note Target Selection::, for more information.
`-u'
`--undefined-only'
Display only undefined symbols (those external to each object
file).
`--defined-only'
Display only defined symbols for each object file.
`-V'
`--version'
Show the version number of `nm' and exit.
`-X'
This option is ignored for compatibility with the AIX version of
`nm'. It takes one parameter which must be the string `32_64'.
The default mode of AIX `nm' corresponds to `-X 32', which is not
supported by GNU `nm'.
`--help'
Show a summary of the options to `nm' and exit.

File: binutils.info, Node: objcopy, Next: objdump, Prev: nm, Up: Top
objcopy
*******
objcopy [ -F BFDNAME | --target=BFDNAME ]
[ -I BFDNAME | --input-target=BFDNAME ]
[ -O BFDNAME | --output-target=BFDNAME ]
[ -S | --strip-all ] [ -g | --strip-debug ]
[ -K SYMBOLNAME | --keep-symbol=SYMBOLNAME ]
[ -N SYMBOLNAME | --strip-symbol=SYMBOLNAME ]
[ -G SYMBOLNAME | --keep-global-symbol=SYMBOLNAME]
[ -L SYMBOLNAME | --localize-symbol=SYMBOLNAME ]
[ -W SYMBOLNAME | --weaken-symbol=SYMBOLNAME ]
[ -x | --discard-all ] [ -X | --discard-locals ]
[ -b BYTE | --byte=BYTE ]
[ -i INTERLEAVE | --interleave=INTERLEAVE ]
[ -j SECTIONNAME | --only-section=SECTIONNAME ]
[ -R SECTIONNAME | --remove-section=SECTIONNAME ]
[ -p | --preserve-dates ] [ --debugging ]
[ --gap-fill=VAL ] [ --pad-to=ADDRESS ]
[ --set-start=VAL ] [ --adjust-start=INCR ]
[ --change-addresses=INCR ]
[ --change-section-address SECTION{=,+,-}VAL ]
[ --change-section-lma SECTION{=,+,-}VAL ]
[ --change-section-vma SECTION{=,+,-}VAL ]
[ --change-warnings ] [ --no-change-warnings ]
[ --set-section-flags SECTION=FLAGS ]
[ --add-section SECTIONNAME=FILENAME ]
[ --change-leading-char ] [ --remove-leading-char ]
[ --srec-len=IVAL ] [ --srec-forceS3 ]
[ --redefine-sym OLD=NEW ] [ --weaken ]
[ --keep-symbols=FILENAME ]
[ --strip-symbols=FILENAME ]
[ --keep-global-symbols=FILENAME ]
[ --localize-symbols=FILENAME ]
[ --weaken-symbols=FILENAME ]
[ -v | --verbose ] [ -V | --version ] [ --help ]
INFILE [OUTFILE]
The GNU `objcopy' utility copies the contents of an object file to
another. `objcopy' uses the GNU BFD Library to read and write the
object files. It can write the destination object file in a format
different from that of the source object file. The exact behavior of
`objcopy' is controlled by command-line options. Note that `objcopy'
should be able to copy a fully linked file between any two formats.
However, copying a relocatable object file between any two formats may
not work as expected.
`objcopy' creates temporary files to do its translations and deletes
them afterward. `objcopy' uses BFD to do all its translation work; it
has access to all the formats described in BFD and thus is able to
recognize most formats without being told explicitly. *Note BFD:
(ld.info)BFD.
`objcopy' can be used to generate S-records by using an output
target of `srec' (e.g., use `-O srec').
`objcopy' can be used to generate a raw binary file by using an
output target of `binary' (e.g., use `-O binary'). When `objcopy'
generates a raw binary file, it will essentially produce a memory dump
of the contents of the input object file. All symbols and relocation
information will be discarded. The memory dump will start at the load
address of the lowest section copied into the output file.
When generating an S-record or a raw binary file, it may be helpful
to use `-S' to remove sections containing debugging information. In
some cases `-R' will be useful to remove sections which contain
information that is not needed by the binary file.
Note - `objcopy' is not able to change the endianness of its input
files. If the input format has an endianness, (some formats do not),
`objcopy' can only copy the inputs into file formats that have the same
endianness or which have no endianness (eg `srec').
`INFILE'
`OUTFILE'
The input and output files, respectively. If you do not specify
OUTFILE, `objcopy' creates a temporary file and destructively
renames the result with the name of INFILE.
`-I BFDNAME'
`--input-target=BFDNAME'
Consider the source file's object format to be BFDNAME, rather than
attempting to deduce it. *Note Target Selection::, for more
information.
`-O BFDNAME'
`--output-target=BFDNAME'
Write the output file using the object format BFDNAME. *Note
Target Selection::, for more information.
`-F BFDNAME'
`--target=BFDNAME'
Use BFDNAME as the object format for both the input and the output
file; i.e., simply transfer data from source to destination with no
translation. *Note Target Selection::, for more information.
`-j SECTIONNAME'
`--only-section=SECTIONNAME'
Copy only the named section from the input file to the output file.
This option may be given more than once. Note that using this
option inappropriately may make the output file unusable.
`-R SECTIONNAME'
`--remove-section=SECTIONNAME'
Remove any section named SECTIONNAME from the output file. This
option may be given more than once. Note that using this option
inappropriately may make the output file unusable.
`-S'
`--strip-all'
Do not copy relocation and symbol information from the source file.
`-g'
`--strip-debug'
Do not copy debugging symbols from the source file.
`--strip-unneeded'
Strip all symbols that are not needed for relocation processing.
`-K SYMBOLNAME'
`--keep-symbol=SYMBOLNAME'
Copy only symbol SYMBOLNAME from the source file. This option may
be given more than once.
`-N SYMBOLNAME'
`--strip-symbol=SYMBOLNAME'
Do not copy symbol SYMBOLNAME from the source file. This option
may be given more than once.
`-G SYMBOLNAME'
`--keep-global-symbol=SYMBOLNAME'
Keep only symbol SYMBOLNAME global. Make all other symbols local
to the file, so that they are not visible externally. This option
may be given more than once.
`-L SYMBOLNAME'
`--localize-symbol=SYMBOLNAME'
Make symbol SYMBOLNAME local to the file, so that it is not
visible externally. This option may be given more than once.
`-W SYMBOLNAME'
`--weaken-symbol=SYMBOLNAME'
Make symbol SYMBOLNAME weak. This option may be given more than
once.
`-x'
`--discard-all'
Do not copy non-global symbols from the source file.
`-X'
`--discard-locals'
Do not copy compiler-generated local symbols. (These usually
start with `L' or `.'.)
`-b BYTE'
`--byte=BYTE'
Keep only every BYTEth byte of the input file (header data is not
affected). BYTE can be in the range from 0 to INTERLEAVE-1, where
INTERLEAVE is given by the `-i' or `--interleave' option, or the
default of 4. This option is useful for creating files to program
ROM. It is typically used with an `srec' output target.
`-i INTERLEAVE'
`--interleave=INTERLEAVE'
Only copy one out of every INTERLEAVE bytes. Select which byte to
copy with the -B or `--byte' option. The default is 4. `objcopy'
ignores this option if you do not specify either `-b' or `--byte'.
`-p'
`--preserve-dates'
Set the access and modification dates of the output file to be the
same as those of the input file.
`--debugging'
Convert debugging information, if possible. This is not the
default because only certain debugging formats are supported, and
the conversion process can be time consuming.
`--gap-fill VAL'
Fill gaps between sections with VAL. This operation applies to
the _load address_ (LMA) of the sections. It is done by increasing
the size of the section with the lower address, and filling in the
extra space created with VAL.
`--pad-to ADDRESS'
Pad the output file up to the load address ADDRESS. This is done
by increasing the size of the last section. The extra space is
filled in with the value specified by `--gap-fill' (default zero).
`--set-start VAL'
Set the start address of the new file to VAL. Not all object file
formats support setting the start address.
`--change-start INCR'
`--adjust-start INCR'
Change the start address by adding INCR. Not all object file
formats support setting the start address.
`--change-addresses INCR'
`--adjust-vma INCR'
Change the VMA and LMA addresses of all sections, as well as the
start address, by adding INCR. Some object file formats do not
permit section addresses to be changed arbitrarily. Note that
this does not relocate the sections; if the program expects
sections to be loaded at a certain address, and this option is
used to change the sections such that they are loaded at a
different address, the program may fail.
`--change-section-address SECTION{=,+,-}VAL'
`--adjust-section-vma SECTION{=,+,-}VAL'
Set or change both the VMA address and the LMA address of the named
SECTION. If `=' is used, the section address is set to VAL.
Otherwise, VAL is added to or subtracted from the section address.
See the comments under `--change-addresses', above. If SECTION
does not exist in the input file, a warning will be issued, unless
`--no-change-warnings' is used.
`--change-section-lma SECTION{=,+,-}VAL'
Set or change the LMA address of the named SECTION. The LMA
address is the address where the section will be loaded into
memory at program load time. Normally this is the same as the VMA
address, which is the address of the section at program run time,
but on some systems, especially those where a program is held in
ROM, the two can be different. If `=' is used, the section
address is set to VAL. Otherwise, VAL is added to or subtracted
from the section address. See the comments under
`--change-addresses', above. If SECTION does not exist in the
input file, a warning will be issued, unless
`--no-change-warnings' is used.
`--change-section-vma SECTION{=,+,-}VAL'
Set or change the VMA address of the named SECTION. The VMA
address is the address where the section will be located once the
program has started executing. Normally this is the same as the
LMA address, which is the address where the section will be loaded
into memory, but on some systems, especially those where a program
is held in ROM, the two can be different. If `=' is used, the
section address is set to VAL. Otherwise, VAL is added to or
subtracted from the section address. See the comments under
`--change-addresses', above. If SECTION does not exist in the
input file, a warning will be issued, unless
`--no-change-warnings' is used.
`--change-warnings'
`--adjust-warnings'
If `--change-section-address' or `--change-section-lma' or
`--change-section-vma' is used, and the named section does not
exist, issue a warning. This is the default.
`--no-change-warnings'
`--no-adjust-warnings'
Do not issue a warning if `--change-section-address' or
`--adjust-section-lma' or `--adjust-section-vma' is used, even if
the named section does not exist.
`--set-section-flags SECTION=FLAGS'
Set the flags for the named section. The FLAGS argument is a
comma separated string of flag names. The recognized names are
`alloc', `contents', `load', `noload', `readonly', `code', `data',
`rom', `share', and `debug'. You can set the `contents' flag for
a section which does not have contents, but it is not meaningful
to clear the `contents' flag of a section which does have
contents-just remove the section instead. Not all flags are
meaningful for all object file formats.
`--add-section SECTIONNAME=FILENAME'
Add a new section named SECTIONNAME while copying the file. The
contents of the new section are taken from the file FILENAME. The
size of the section will be the size of the file. This option only
works on file formats which can support sections with arbitrary
names.
`--change-leading-char'
Some object file formats use special characters at the start of
symbols. The most common such character is underscore, which
compilers often add before every symbol. This option tells
`objcopy' to change the leading character of every symbol when it
converts between object file formats. If the object file formats
use the same leading character, this option has no effect.
Otherwise, it will add a character, or remove a character, or
change a character, as appropriate.
`--remove-leading-char'
If the first character of a global symbol is a special symbol
leading character used by the object file format, remove the
character. The most common symbol leading character is
underscore. This option will remove a leading underscore from all
global symbols. This can be useful if you want to link together
objects of different file formats with different conventions for
symbol names. This is different from `--change-leading-char'
because it always changes the symbol name when appropriate,
regardless of the object file format of the output file.
`--srec-len=IVAL'
Meaningful only for srec output. Set the maximum length of the
Srecords being produced to IVAL. This length covers both address,
data and crc fields.
`--srec-forceS3'
Meaningful only for srec output. Avoid generation of S1/S2
records, creating S3-only record format.
`--redefine-sym OLD=NEW'
Change the name of a symbol OLD, to NEW. This can be useful when
one is trying link two things together for which you have no
source, and there are name collisions.
`--weaken'
Change all global symbols in the file to be weak. This can be
useful when building an object which will be linked against other
objects using the `-R' option to the linker. This option is only
effective when using an object file format which supports weak
symbols.
`--keep-symbols=FILENAME'
Apply `--keep-symbol' option to each symbol listed in the file
FILENAME. FILENAME is simply a flat file, with one symbol name
per line. Line comments may be introduced by the hash character.
This option may be given more than once.
`--strip-symbols=FILENAME'
Apply `--strip-symbol' option to each symbol listed in the file
FILENAME. FILENAME is simply a flat file, with one symbol name
per line. Line comments may be introduced by the hash character.
This option may be given more than once.
`--keep-global-symbols=FILENAME'
Apply `--keep-global-symbol' option to each symbol listed in the
file FILENAME. FILENAME is simply a flat file, with one symbol
name per line. Line comments may be introduced by the hash
character. This option may be given more than once.
`--localize-symbols=FILENAME'
Apply `--localize-symbol' option to each symbol listed in the file
FILENAME. FILENAME is simply a flat file, with one symbol name
per line. Line comments may be introduced by the hash character.
This option may be given more than once.
`--weaken-symbols=FILENAME'
Apply `--weaken-symbol' option to each symbol listed in the file
FILENAME. FILENAME is simply a flat file, with one symbol name
per line. Line comments may be introduced by the hash character.
This option may be given more than once.
`-V'
`--version'
Show the version number of `objcopy'.
`-v'
`--verbose'
Verbose output: list all object files modified. In the case of
archives, `objcopy -V' lists all members of the archive.
`--help'
Show a summary of the options to `objcopy'.