# Copyright 2021-2024 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# This test exercises the gdb-gdb.py helper script that is generated
# into the GDB build directory.  This script is intended for use by
# developers to make debugging GDB easier.

load_lib selftest-support.exp

require {!target_info exists gdb,noinferiorio}

require allow_python_tests

standard_testfile .cc

if { [build_executable "failed to build" $testfile $srcfile {debug c++}] } {
    return -1
}

# Find the helper script in the GDB build directory.
set py_helper_script [file dirname $GDB]/gdb-gdb.py
if { ![file readable $py_helper_script] \
	 || [file type $py_helper_script] != "file" } {
    untested "failed to find gdb-gdb.py helper script"
    return
}

# The main test.  This is called by the self-test framework once GDB
# has been started on a copy of itself.
proc test_python_helper {} {
    global py_helper_script decimal hex gdb_prompt bkptno_numopt_re
    global inferior_spawn_id

    # Source the python helper script.  This script registers the
    # pretty printer for the object file called 'gdb', however, in our
    # selftests we rename 'gdb' to 'xgdb', so the pretty printer
    # doesn't get registered by default.
    #
    # So, after sourcing the script we do our own objfile scan and
    # register the pretty printer for the objfile called 'xgdb'.
    gdb_test_no_output "source $py_helper_script" \
	"source gdb-gdb.py helper script"
    gdb_test [multi_line_input \
		  "python" \
		  "for objfile in gdb.objfiles():" \
		  "  if os.path.basename(objfile.filename) == \"xgdb\":" \
		  "    objfile.pretty_printers.append(type_lookup_function)" \
		  "end"] ".*" \
	"register the type pretty printer"

    # Now place breakpoints somewhere useful.  These locations can be
    # any function that:
    #
    # (a) is easy to reach by issuing a simple gdb command, and
    # (b) is unlikely to be modified very often within gdb, and
    # (c) has a parameter that is either a 'struct type *' or a 'struct value *'.
    gdb_breakpoint value_print qualified
    gdb_breakpoint c_print_type qualified

    # With gdb build with -O2 -flto=auto and gcc 7.5.0, we can get the mangled
    # names due to a problem in the debug info, so we work around this by less
    # strict matching.
    set fn_name_value_print "\[^\r\n\]*value_print\[^\r\n\]*"
    set fn_name_c_print_type "\[^\r\n\]*c_print_type\[^\r\n\]*"

    # Disable all breakpoints until after we have loaded the test
    # binary into the inner GDB.
    gdb_test_no_output "disable breakpoints"

    set outer_prompt_re "\\(outer-gdb\\) $"

    # Adjust the prompt on the outer gdb, this just makes things a
    # little clearer when trying to unpick which GDB is active.
    gdb_test_no_output -prompt $outer_prompt_re  "set prompt (outer-gdb) " "set outer gdb prompt"

    # Send a command to the outer GDB to continue the inner GDB.  The
    # stop is being detected from the inner GDB, hence the use of -i
    # here.
    gdb_test_multiple "continue" "start inner gdb" {
	-re "received signal SIGSEGV.* in GC_.*$outer_prompt_re" {
	    # Some versions of the GC used by Guile cause a SEGV
	    # during stack probing.  Ignore this and carry on.
	    send_gdb "continue\n"
	    exp_continue
	}
	-i "$inferior_spawn_id"
	-re "\r\n$gdb_prompt $" {
	    pass $gdb_test_name
	}
    }

    # Load the test executable into the inner GDB.  The output here is
    # being read from the inner GDB, hence the use of -i here.
    send_inferior "file -readnow $::binfile\n"
    gdb_test_multiple "" "loading test binary into inner GDB" {
	-i "$inferior_spawn_id"
	-re "Reading symbols from.*\r\n$gdb_prompt $" {
	    pass $gdb_test_name
	}
    }

    # Send Ctrl-C to the inner GDB, this should kick us back to the
    # prompt of the outer GDB.
    send_inferior "\003"
    gdb_test -prompt $outer_prompt_re "" "" "interrupted the inner"

    # Now enable all breakpoints within the outer GDB.
    gdb_test_no_output -prompt $outer_prompt_re "enable breakpoints"

    # We need to resume the inner GDB after interrupting it, this is
    # done by sending 'continue'.  However, GDB will not redisplay the
    # prompt in this case, so we have nothing that we can detect in
    # order to know this continue was successful.  Still, if this
    # didn't work, then later tests should fail.
    send_gdb "continue\n"

    # Control is back with the inner GDB.  Send a command to the inner
    # GDB, this should result in the outer GDB stopping at one of the
    # breakpoints we created..
    send_inferior "print 1\n"
    gdb_test -prompt $outer_prompt_re "" \
	"Breakpoint $bkptno_numopt_re, $fn_name_value_print.*" \
	"hit breakpoint in outer gdb"

    # Now inspect the type of parameter VAL, this should trigger the
    # pretty printers.
    set answer [multi_line \
		    "${decimal} = " \
		    "\{pointer_type = 0x0," \
		    " reference_type = 0x0," \
		    " chain = 0x0," \
		    " instance_flags = 0," \
		    " length = $decimal," \
		    " main_type = $hex\}"]
    gdb_test -prompt $outer_prompt_re "print *val->m_type" $answer "pretty print type"

    set answer [multi_line \
		    "$decimal = " \
		    "\{name = $hex \"int\"," \
		    " code = TYPE_CODE_INT," \
		    " flags = \[^\r\n\]+," \
		    " owner = $hex \\(gdbarch\\)," \
		    " target_type = 0x0," \
		    " int_stuff = \{ bit_size = $decimal, bit_offset = $decimal \}\}"]
    gdb_test -prompt $outer_prompt_re "print *val->m_type->main_type" $answer "pretty print type->main_type"

    # Send the continue to the outer GDB, which resumes the inner GDB,
    # we then detect the prompt from the inner GDB, hence the use of
    # -i here.
    gdb_test_multiple "continue" "resume inner gdb" {
	-i $inferior_spawn_id
	-re "\r\n$gdb_prompt $" {
	    pass $gdb_test_name
	}
    }

    # Now print an integer that was created from the DWARF
    # information, this will include the TYPE_SPECIFIC_INT
    # information.
    send_inferior "print global_c.m_val\n"
    gdb_test -prompt $outer_prompt_re "" \
	"Breakpoint $bkptno_numopt_re, $fn_name_value_print.*" \
	"print integer from DWARF info"

    set answer [multi_line \
		    "$decimal = " \
		    "\{name = $hex \"int\"," \
		    " code = TYPE_CODE_INT," \
		    " flags = \[^\r\n\]+," \
		    " owner = $hex \\(objfile\\)," \
		    " target_type = 0x0," \
		    " int_stuff = \{ bit_size = $decimal, bit_offset = $decimal \}\}"]
    gdb_test -prompt $outer_prompt_re "print *val->m_type->main_type" $answer "pretty print type->main_type for DWARF type"

    # Send the continue to the outer GDB, which resumes the inner GDB,
    # we then detect the prompt from the inner GDB, hence the use of
    # -i here.
    gdb_test_multiple "continue" "resume inner gdb again" {
	-i $inferior_spawn_id
	-re "\r\n$gdb_prompt $" {
	    pass $gdb_test_name
	}
    }

    # Send a command to the inner GDB, this should result in the outer
    # GDB stopping at the value_print breakpoint again.
    send_inferior "ptype global_c\n"
    set test "hit breakpoint in outer gdb again"
    set in_outer_gdb 0
    gdb_test_multiple "" $test  -prompt $outer_prompt_re {
	-re -wrap "Breakpoint $bkptno_numopt_re, $fn_name_c_print_type.*" {
	    pass $gdb_test_name
	    set in_outer_gdb 1
	}
	-re "\r\n$gdb_prompt $" {
	    unsupported $gdb_test_name
	}
    }

    if { ! $in_outer_gdb } {
	return 0
    }

    set cmd "print *type->main_type"
    set cmd_supported 1
    foreach sub_expr { type type->main_type } {
	set ok 0
	gdb_test_multiple "print $sub_expr" "" -prompt $outer_prompt_re {
	    -re -wrap " = \\(\[^\r\n\]+ \\*\\) $hex" {
		set ok 1
	    }
	    -re -wrap "" {
	    }
	}
	if { ! $ok } {
	    set cmd_supported 0
	    break
	}
    }

    if { $cmd_supported } {
	set answer [multi_line \
			"$decimal = " \
			"\{name = $hex \"CC\"," \
			" code = TYPE_CODE_STRUCT," \
			" flags = \[^\r\n\]+," \
			" owner = $hex \\(objfile\\)," \
			" target_type = 0x0," \
			" flds_bnds\\.fields\\\[0\\\]:" \
			"  \{m_name = $hex \"m_val\"," \
			"   m_type = $hex," \
			"   m_loc_kind = FIELD_LOC_KIND_BITPOS," \
			"   bitsize = 0," \
			"   bitpos = 0\}," \
			" cplus_stuff = $hex\}"]
	gdb_test -prompt $outer_prompt_re $cmd $answer
    } else {
	unsupported $cmd
    }

    # Test the htab_t pretty-printer.
    gdb_test -prompt $outer_prompt_re "print all_bfds" "htab_t with ${::decimal} elements = \\{${::hex}.*\\}"

    return 0
}

# Use the self-test framework to run the test.
do_self_tests captured_main test_python_helper