blob: b0d30b2aa0011f1574178c1b2ed7c06d2530b5b1 [file] [log] [blame]
2014-12-27 Anthony Green <green@moxielogic.com
* config/tc-moxie.c (md_assemble): ldo/sto instructions now use a
16 bit offset instead of 32.
2014-12-25 Yaakov Selkowitz <yselkowi@redhat.com>
PR gas/17753
* config/tc-mep.c (md_begin): Specify types of vararg literals.
2014-12-24 Andrew Burgess <andrew.burgess@embecosm.com>
* doc/c-avr.texi: Document -mlink-relax and -mno-link-relax.
2014-12-24 Andrew Burgess <andrew.burgess@embecosm.com>
* config/tc-avr.c (struct avr_opt_s): Change link_relax to
no_link_relax, extend comment.
(enum options): Add new OPTION_NO_LINK_RELAX.
(md_longopts): Add entry for -mno-link-relax.
(md_parse_option): Handle OPTION_NO_LINK_RELAX, and update
OPTION_LINK_RELAX.
(md_begin): Initialise linkrelax from no_link_relax.
(md_show_usage): Include -mno-link-relax option.
(relaxable_section): Only allocatable code sections can be
relaxed.
2014-12-23 Andrew Burgess <andrew.burgess@embecosm.com>
* config/tc-avr.c: Add include for elf/avr.h.
(avr_elf_final_processing): New function.
* config/tc-avr.h (elf_tc_final_processing): Define.
(avr_elf_final_processing): Declare
2014-12-18 Xingxing Pan <xxingpan@marvell.com>
* gas/config/tc-arm.c (arm_cpus): Add core marvell-whitney.
2014-12-23 Nick Clifton <nickc@redhat.com>
* po/fr.po: Updated French translation.
* po/uk.po: Updated Ukrainian translation.
2014-12-19 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (md_apply_fix): Apply alignment check
to the symbol and offset rather than *valP for
BFD_RELOC_MIPS_18_PCREL_S3. Also update the error message
for BFD_RELOC_MIPS_19_PCREL_S2.
2014-12-14 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (flag_compress_debug): Default to compress
debug sections for Linux.
* NEWS: Mention it.
2014-12-12 Alan Modra <amodra@gmail.com>
* config/tc-ppc.h (md_reg_eh_frame_to_debug_frame): Match current
gcc behaviour.
* config/te-aix.h: New file.
* configure.tgt: Use em=aix for powerpc-aix.
2014-12-09 Chen Gang <gang.chen.5i5j@gmail.com>
* config/tc-tic4x.c (md_assemble): Ensure insn->name is zero
terminated. Simplify concatenation of parallel insn.
2014-12-06 Eric Botcazou <ebotcazou@adacore.com>
* configure.tgt: Add Visium support.
* Makefile.am (TARGET_CPU_CFILES): Move config/tc-vax.c around
and add config/tc-visium.c.
(TARGET_CPU_HFILES): Move config/tc-vax.h around and add
config/tc-visium.h.
* Makefile.in: Regenerate.
* config/tc-visium.c: New file.
* config/tc-visium.h: Likewise.
* po/POTFILES.in: Regenerate.
2014-11-28 Sandra Loosemore <sandra@codesourcery.com>
* config/tc-nios2.c (can_evaluate_expr, get_expr_value): Delete.
(output_addi, output_andi, output_ori, output_xori): Delete.
(md_assemble): Remove calls to deleted functions.
2014-11-25 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (search_trampolines): Move post-loop
condition check outside the search loop.
2014-11-24 H.J. Lu <hongjiu.lu@intel.com>
* configure: Regenerated.
2014-11-21 Terry Guo <terry.guo@arm.com>
* config/tc-arm.c (md_assemble): Do not consider relaxation.
(md_convert_frag): Test and set target arch attribute accordingly.
(aeabi_set_attribute_string): Turn it into a global function.
* config/tc-arm.h (md_post_relax_hook): Enable it for ARM target.
(aeabi_set_public_attributes): Declare it.
2014-11-21 Terry Guo <terry.guo@arm.com>
* config/tc-arm.c (fpu_vfp_ext_armv8xd): New.
(arm_cpus): Support cortex-m7.
(arm_fpus): Support fpv5-sp-d16 and fpv5-d16.
(do_vfp_nsyn_cvt_fpv8): Generate error when use D register for S
register only target like FPv5-SP-D16.
(do_neon_cvttb_1): Likewise.
(do_vfp_nsyn_fpv8): Likewise.
(do_vrint_1): Likewise.
(aeabi_set_public_attributes): Set proper FP arch for FPv5.
* doc/c-arm.texi: Document new cpu and fpu names for cortex-m7.
2014-11-20 Richard Earnshaw <rearnsha@arm.com>
* config/tc-arm.c (rotate_left): Avoid undefined behaviour when
N = 0.
2014-11-20 Richard Earnshaw <rearnsha@arm.com>
* config/tc-aarch64.c (warn_unpredictable_ldst): Check that transfer
registers are in the GP register set. Adjust warnings. Use correct
field member for address register.
* testsuite/gas/aarch64/diagnostic.l: Update.
2014-11-19 Ryan Mansfield <rmansfield@qnx.com>
* config/tc-aarch64.c (md_assemble): Call warn_unpredictable_ldst.
(warn_unpredictable_ldst): New.
2014-11-18 Igor Zamyatin <igor.zamyatin@intel.com>
* config/tc-i386-intel.c (i386_operator): Remove last argument
from lex_got call.
* config/tc-i386.c (reloc): Remove bnd_prefix from parameters'
list. Return always BFD_RELOC_32_PCREL.
* (output_branch): Remove condition for BFD_RELOC_X86_64_PC32_BND.
* (output_jump): Update call to reloc accordingly.
* (output_interseg_jump): Likewise.
* (output_disp): Likewise.
* (output_imm): Likewise.
* (x86_cons_fix_new): Likewise.
* (lex_got): Remove bnd_prefix from parameters' list in macro and
declarations. Don't use BFD_RELOC_X86_64_PLT32_BND.
* (x86_cons): Update call to lex_got accordingly.
* (i386_immediate): Likewise.
* (i386_displacement): Likewise.
* (md_apply_fix): Don't use BFD_RELOC_X86_64_PLT32_BND nor
BFD_RELOC_X86_64_PC32_BND.
* (tc_gen_reloc): Likewise.
2014-11-18 Jan Beulich <jbeulich@suse.com>
* config/tc-aarch64.c (s_aarch64_arch_extension): New.
(md_pseudo_table): Add arch_extension.
(aarch64_parse_features): New parameter "ext_only". Handle it.
(aarch64_parse_cpu, aarch64_parse_arch, s_aarch64_cpu,
s_aarch64_arch): Pass FALSE as new third argument of
aarch64_parse_features().
2014-11-17 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* config/tc-aarch64.c (aarch64_cpus): Add "xgene2".
* doc/c-aarch64.texi: Document it.
2014-11-17 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* config/tc-aarch64.c (aarch64_cpus): Add "xgene1".
* doc/c-aarch64.texi: Rename xgene-1 to xgene1.
2014-11-17 Ilya Tocar <ilya.tocar@intel.com>
* config/tc-i386.c (cpu_arch): Add .avx512vbmi.
* doc/c-i386.texi: Document it.
2014-11-17 Ilya Tocar <ilya.tocar@intel.com>
* config/tc-i386.c (cpu_arch): Add .avx512ifma.
* doc/c-i386.texi: Document it.
2014-11-17 Ilya Tocar <ilya.tocar@intel.com>
* config/tc-i386.c (cpu_arch): Add .pcommit.
* doc/c-i386.texi: Document it.
2014-11-17 Ilya Tocar <ilya.tocar@intel.com>
* config/tc-i386.c (cpu_arch): Add .clwb.
* doc/c-i386.texi: Document it.
2014-11-14 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (cpu_arch): Re-arrange avx512* and xsave*
items.
* doc/c-i386.texi: Re-arrange avx512* and xsave*. Add
clflushopt and se1. Remove duplicated entries.
2014-11-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add CRC feature for
cortex-A53 and cortex-A57.
2014-11-13 H.J. Lu <hongjiu.lu@intel.com>
PR gas/17598
* config/tc-i386.c (reloc): Support BFD_RELOC_X86_64_GOTPLT64.
2014-11-13 Nick Clifton <nickc@redhat.com>
PR binutils/17512
* config/obj-coff.c (coff_obj_symbol_new_hook): Set the is_sym
field.
2014-11-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Remove example-1 and example-2.
2014-11-12 Alan Modra <amodra@gmail.com>
* config/tc-z80.c (parse_exp_not_indexed, parse_exp): Warning fixes.
2014-11-12 Alan Modra <amodra@gmail.com>
PR ld/17482
* config/tc-i386.c (output_insn): Don't test x86_elf_abi when
not ELF.
2014-11-11 Nick Clifton <nickc@redhat.com>
* po/uk.po: Updated Ukranian translation.
2014-11-07 H.J. Lu <hongjiu.lu@intel.com>
PR ld/17482
* config/tc-i386.c (output_insn): Add a dummy REX_OPCODE prefix
for instructions with R_X86_64_GOTTPOFF relocation for x32 if
needed.
2014-11-06 Sandra Loosemore <sandra@codesourcery.com>
* config/tc-nios2.c (nios2_diagnose_overflow): Adjust call to
nios2_find_opcode_hash.
2014-11-05 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (mips_elf_final_processing): Add INSN_ISA32R6
and INSN_ISA64R6 support.
2014-11-04 Alan Modra <amodra@gmail.com>
* expr.c (expr_symbol_where): Don't use register keyword.
* app.c (app_push, app_pop, do_scrub_chars): Likewise.
* ecoff.c (add_string, add_ecoff_symbol, add_aux_sym_symint,
add_aux_sym_rndx, add_aux_sym_tir, add_procedure, add_file,
ecoff_build_lineno, ecoff_setup_ext, allocate_cluster.
allocate_scope, allocate_vlinks, allocate_shash,
allocate_thash, allocate_tag, allocate_forward, allocate_thead,
allocate_lineno_list): Likewise.
* frags.c (frag_more, frag_var, frag_variant, frag_wane): Likewise.
* input-file.c (input_file_push, input_file_pop): Likewise.
* input-scrub.c (input_scrub_push, input_scrub_next_buffer): Likewise.
* subsegs.c (subseg_change): Likewise.
* symbols.c (colon, symbol_table_insert, symbol_find_or_make)
(dollar_label_name, fb_label_name): Likewise.
* write.c (relax_align): Likewise.
* config/tc-alpha.c (s_alpha_pdesc): Likewise.
* config/tc-bfin.c (bfin_s_bss): Likewise.
* config/tc-i860.c (md_estimate_size_before_relax): Likewise.
* config/tc-m68hc11.c (md_convert_frag): Likewise.
* config/tc-m68k.c (m68k_ip, crack_operand): Likewise.
(md_convert_frag_1, s_even): Likewise.
* config/tc-mips.c (mips_clear_insn_labels): Likewise.
* config/tc-mn10200.c (md_begin): Likewise.
* config/tc-s390.c (s390_setup_opcodes, md_begin): Likewise.
* config/tc-sh.c (sh_elf_cons): Likewise.
* config/tc-tic4x.c (tic4x_cons, tic4x_stringer): Likewise.
* config/m68k-parse.y (m68k_reg_parse): Likewise. Convert from K&R.
(yylex, m68k_ip_op, yyerror): Convert from K&R.
2014-11-04 Alan Modra <amodra@gmail.com>
* config/tc-d10v.c (find_opcode): Call frag_now_fix_octets rather
than equivalent obstack_next_free expression.
* config/tc-d30v.c (find_format): Likewise.
2014-11-03 Nick Clifton <nickc@redhat.com>
* config/tc-msp430.c (msp430_srcoperand): Fix range test for
20-bit values.
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
2014-10-30 Dr Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* config/tc-aarch64.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define to 7.
* config/tc-aarch64.c (aarch64_handle_align): Rewrite to handle
large alignments with a constant fragment size of
MAX_MEM_FOR_RS_ALIGN_CODE.
2014-10-29 Nick Clifton <nickc@redhat.com>
* po/uk.po: New Ukranian translation.
2014-10-23 Sandra Loosemore <sandra@codesourcery.com>
* config/tc-nios2.c (nios2_insn_infoS): Add constant_bits field.
(nios2_arg_infoS, nios2_arg_hash, nios2_arg_lookup): Delete.
(nios2_control_register_arg_p): Delete.
(nios2_coproc_reg): Delete.
(nios2_relax_frag): Remove hard-coded instruction size.
(md_convert_frag): Use new insn accessor macros.
(nios2_diagnose_overflow): Remove hard-coded instruction size.
(md_apply_fix): Likewise.
(bad_opcode): New.
(nios2_parse_reg): New.
(nios2_assemble_expression): Remove prev_reloc parameter. Adjust
uses and callers.
(nios2_assemble_arg_c): New.
(nios2_assemble_arg_d): New.
(nios2_assemble_arg_s): New.
(nios2_assemble_arg_t): New.
(nios2_assemble_arg_i): New.
(nios2_assemble_arg_u): New.
(nios2_assemble_arg_o): New.
(nios2_assemble_arg_j): New.
(nios2_assemble_arg_l): New.
(nios2_assemble_arg_m): New.
(nios2_assemble_args): New.
(nios2_assemble_args_dst): Delete.
(nios2_assemble_args_tsi): Delete.
(nios2_assemble_args_tsu): Delete.
(nios2_assemble_args_sto): Delete.
(nios2_assemble_args_o): Delete.
(nios2_assemble_args_is): Delete.
(nios2_assemble_args_m): Delete.
(nios2_assemble_args_s): Delete.
(nios2_assemble_args_tis): Delete.
(nios2_assemble_args_dc): Delete.
(nios2_assemble_args_cs): Delete.
(nios2_assemble_args_ds): Delete.
(nios2_assemble_args_ldst): Delete.
(nios2_assemble_args_none): Delete.
(nios2_assemble_args_dsj): Delete.
(nios2_assemble_args_d): Delete.
(nios2_assemble_args_b): Delete.
(nios2_arg_info_structs): Delete.
(NIOS2_NUM_ARGS): Delete.
(nios2_consume_arg): Remove insn parameter. Use new macros.
Don't check register arguments here. Remove 'b' case.
(nios2_consume_separator): Move check for missing separators to...
(nios2_parse_args): ...here. Remove special case for optional
arguments.
(output_insn): Avoid using hard-coded insn size.
(output_ubranch): Likewise.
(output_cbranch): Likewise.
(output_call): Use new macros.
(output_addi): Likewise.
(output_ori): Likewise.
(output_xori): Likewise.
(output_movia): Likewise.
(md_begin): Remove nios2_arg_info_structs initialization.
(md_assemble): Initialize constant_bits field. Use
nios2_parse_args instead of looking up parse function in hash table.
2014-10-22 Matthew Fortune <matthew.fortune@imgtec.com>
* doc/as.texinfo: Update the MIPS FP ABI descriptions.
* doc/c-mips.texi: Spell check and correct throughout.
2014-10-21 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.c (s_insn): Set file options.
2014-10-21 Andrew Pinski <apinski@cavium.com>
* config/tc-aarch64.c (aarch64_cpus):
Add thunderx.
* doc/c-aarch64.texi: Document that thunderx
is a valid processor name.
2014-10-21 Jan Beulich <jbeulich@suse.com>
* read.c (HANDLE_CONDITIONAL_ASSEMBLY): New parameter "num_read".
(read_a_source_file): Adjust HANDLE_CONDITIONAL_ASSEMBLY
invocations.
(_find_end_of_line): Don't issue "stray '\\'" warning when in
false branch of conditional.
2014-10-21 Jan Beulich <jbeulich@suse.com>
* config/tc-aarch64.c (output_operand_error_record): Move down
assertion of idx being non-negative. Use local variables when
available.
2014-10-18 Alan Modra <amodra@gmail.com>
PR 17493
* write.c (adjust_reloc_syms): Don't allow symbols in reg_section
to be reduced to reg_section section symbol.
* gas/config/tc-i386.c (i386_finalize_immediate): Reject all
reg_section immediates.
2014-10-17 Matthew Fortune <matthew.fortune@imgtec.com>
* doc/c-mips.texi: Fix bad @value references.
2014-10-15 Tristan Gingold <gingold@adacore.com>
* configure: Regenerate.
2014-10-15 Chen Gang <gang.chen.5i5j@gmail.com>
* config/tc-tic4x.c (md_assemble): Correct strncat size.
2014-10-14 Tristan Gingold <gingold@adacore.com>
* NEWS: Add marker for 2.25.
2014-10-14 Alan Modra <amodra@gmail.com>
PR 17453
* config/tc-i386.c (fits_in_signed_long): Use unsigned param and
expression to avoid signed overflow.
(fits_in_signed_byte, fits_in_unsigned_byte, fits_in_unsigned_word,
fits_in_signed_word, fits_in_unsigned_long): Similarly.
* expr.c (operand <'-'>): Avoid signed overflow.
* read.c (s_comm_internal): Likewise.
2014-10-14 Alan Modra <amodra@gmail.com>
* config/tc-sparc.c (sparc_md_end): Fix unused variable warnings.
2014-10-09 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (v9a_asr_table): Entry for %cps removed.
(sparc_arch_table): Remove the HWCAP_RANDOM, HWCAP_TRANS and
HWCAP_ASI_CACHE_SPARING from the architectures using them.
(HWS_V8): New define.
(HWS_V9): Likewise.
(HWS_VA): Likewise.
(HWS_VB): Likewise.
(HWS_VC): Likewise.
(HWS_VD): Likewise.
(HWS_VE): Likewise.
(HWS_VV): Likewise.
(sparc_arch): Use the HWS_* macros. Fix the `sparc4' architecture
to cover the HWCAP_ASI_BLK_INIT and HWCAP_IMA capabilities.
(hwcap_seen): Variable widened to 64 bits.
(hwcap_allowed): Likewise.
(sparc_arch): new field `hwcap2_allowed'.
(sparc_arch_table): provide hwcap2_allowed values for existing
archs.
(sparc_md_end): Add a HWCAPS2 object attribute to the elf object
in case any of the HWCAP2_* caps are used.
(sparc_ip): Take into account the new hwcaps2 bitmap to build the
list of seen/allowed hwcaps.
(get_hwcap_name): Argument widened to 64 bits to handle HWCAP2
bits.
(HWS_VM): New define.
(HWS2_VM): Likewise.
(sparc_arch): New architectures `sparc5', `v9m' and `v8plusm'.
(v9a_asr_table): Add the %mwait (%asr28) ancillary state register
to the table.
(sparc_ip): Handle the %mcdper ancillary state register as an
operand.
(sparc_ip): Handle } arguments as fdrd floating point registers
(double) that are the same than frs1.
* doc/c-sparc.texi (Sparc-Opts): Document the -Av9e, -Av8pluse and
-xarch=v9e command line options. Also fix the description of the
-Av9v and -Av8plusv command line options.
Document the -Av9m, -Av8plusm,-Asparc5, -xarch=v9m and
-xarch=sparc5 command line options.
2014-09-29 Terry Guo <terry.guo@arm.com>
* as.c (create_obj_attrs_section): Move it and call it from ...
* write.c (create_obj_attrs_section): ... here.
(subsegs_finish_section): Refactored.
2014-09-27 Alan Modra <amodra@gmail.com>
* dwarf2dbg.c (all_segs_hash): Delete.
(get_line_subseg): Delete last_seg, last_subseg, last_line_subseg.
Retrieve line_seg for section via seg_info.
* subsegs.h (segment_info_typet): Add dwarf2_line_seg.
2014-09-23 H.J. Lu <hongjiu.lu@intel.com>
PR gas/17421
* config/tc-i386.c (md_assemble): Disallow VEX/EVEX encoded
instructions in 16-bit mode.
2014-09-22 Alan Modra <amodra@gmail.com>
* config/tc-m68k.c (md_assemble): Add assert to work around
bogus trunk gcc warning.
* config/tc-pj.h (md_convert_frag): Warning fix.
* config/tc-xtensa.c (xg_assemble_vliw_tokens): Warning fix.
2014-09-17 Tristan Gingold <gingold@adacore.com>
* config/tc-arm.c (move_or_literal_pool, add_to_lit_pool): Use
bfd_int64_t instead of int64_t.
2014-09-16 Ilya Tocar <ilya.tocar@intel.com>
* config/tc-i386.c (evexrcig): New.
(build_evex_prefix): Force rounding bits.
(OPTION_MEVEXRCIG): New.
(md_longopts): Add mevexrcig.
(md_parse_option): Handle OPTION_MEVEXRCIG.
(md_show_usage): Document mevexrcig.
* doc/c-i386.texi (mevexrcig): Document new option.
2014-09-16 Kuan-Lin Chen <kuanlinchentw@gmail.com>
* config/tc-nds32.c (nds32_fsrs, nds32_fdrs, nds32_gprs): Remove.
(relax_table): Add new relaxation pattern.
(do_pseudo_la_internal, do_pseudo_ls_bhw): Expand for PIC suffix.
(do_pseudo_move, do_pseudo_neg, do_pseudo_pushpopm): Fix.
(get_range_type, nds32_elf_record_fixup_exp, nds32_get_align,
nds32_elf_build_relax_relation, md_assemble, invalid_prev_frag,
nds32_relax_frag, md_estimate_size_before_relax): Adjust relaxation.
(relocation_table): Remove.
(relax_ls_table): Load-store relaxation pattern.
(hint_map): Define-use chain pattern.
(nds32_find_reloc_table, nds32_match_hint_insn): Analysis
relaxation pattern.
(nds32_parse_name): Parse PIC suffix.
* config/tc-nds32.h: Declare.
2014-09-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (OPTION_omit_lock_prefix): Renamed to ...
(OPTION_OMIT_LOCK_PREFIX): This.
(md_longopts): Updated.
(md_parse_option): Likewise.
2014-09-15 Andrew Bennett <andrew.bennett@imgtec.com>
Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
2014-09-15 Matthew Fortune <matthew.fortune@imgtec.com>
* tc-mips.c (check_fpabi): Move softfloat and singlefloat
checks higher.
2014-09-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Update the set of allowed hwcaps
when bumping the current architecture.
(md_begin): Adjust the highetst architecture level also when a
specific architecture is not requested.
2014-09-12 Andrew Bennett <andrew.bennett@imgtec.com>
* configure.tgt: Add mips*-img-elf* target triple.
2014-09-12 Alan Modra <amodra@gmail.com>
* config/tc-i386.c (match_template): Remove redundant "!!" testing
single-bit bitfields.
(build_modrm_byte): Don't compare single-bit bitfields to "1".
2014-09-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-arm.c (arm_cpus): Add cortex-a17.
2014-09-03 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (parse_sys_reg): Remove the restriction on op0
field.
2014-09-03 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (parse_operands): Recognize PAIRREG.
(aarch64_features): Add entry for lse extension.
2014-08-26 Jiong Wang <jiong.wang@arm.com>
* config/tc-arm.c (aeabi_set_public_attributes): Update selected_cpu
based on the info we got during parsing.
(arm_handle_align): Make sure the p2align expanding logic under thumb
unchanged.
2014-08-26 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
jump to...
<M_SAAD_AB>: ... here. Assert that !microMIPS.
2014-08-26 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* config/tc-moxie.h (md_convert_frag): Silence warning.
2014-08-22 Richard Henderson <rth@redhat.com>
* config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
register number for vector register types.
* config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
(DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
flag if both the processor and opcode flags match.
2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
2014-08-20 Maciej W. Rozycki <macro@codesourcery.com>
* dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
(dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
(output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
2014-08-20 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-arm.c (parse_ifimm_zero): New function.
(enum operand_parse_code): Add OP_RSVD_FI0 value.
(parse_operands): Handle OP_RSVD_FI0.
(asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
2014-08-20 Alan Modra <amodra@gmail.com>
* Makefile.am: Typo fix.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2014-08-19 Andreas Tobler <andreast@fgznet.ch>
* Makefile.am: Add FreeBSD ARM support.
* Mafefile.in: Regenerate.
* configure.tgt: Add FreeBSD ARM support.
* config/te-armfbsdeabi.h: New file.
* config/te-armfbsdvfp.h: Likewise.
2014-08-19 Alan Modra <amodra@gmail.com>
* configure: Regenerate.
2014-08-18 Nick Clifton <nickc@redhat.com>
* config/tc-rl78.c (md_apply_fix): Correct handling of small sized
RELOC_RL78_DIFF fixups.
2014-08-18 Alan Modra <amodra@gmail.com>
* read.c (parse_mri_cons): Warning fix.
2014-08-14 Alan Modra <amodra@gmail.com>
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
2014-08-06 Ilya Tocar <ilya.tocar@intel.com>
* config/tc-i386.c (omit_lock_prefix): New.
(output_insn): Omit lock prefix if omit_lock_prefix is true.
(OPTION_omit_lock_prefix): New.
(md_longopts): Add momit-lock-prefix.
(md_parse_option): Handle momit-lock-prefix.
(md_show_usage): Add momit-lock-prefix=[no|yes].
* doc/c-i386.texi (momit-lock-prefix): Document.
2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com>
PR 10378
* config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
SWITCH_TABLE case.
2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (mips_flags_frag): New static global.
(struct mips_set_options): Add oddspreg field.
(file_mips_opts, mips_opts): Initialize oddspreg.
(ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
Loongson-3a.
(enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
and -mno-odd-spreg options.
(md_begin): Create .MIPS.abiflags section.
(fpabi_incompatible_with, fpabi_requires): New static function.
(check_fpabi): Likewise.
(mips_check_options): Handle fp=xx and oddspreg restrictions.
(file_mips_check_options): Set oddspreg by default for fp=xx.
(mips_oddfpreg_ok): Re-write function.
(check_regno): Check odd numbered registers regardless of FPR size.
For fp != 32 use as_bad instead of as_warn.
(match_float_constant): Rewrite check regarding FP register width. Add
support for generating constants when MXHC1 is present. Handle fp=xx
to comply with the ABI.
(macro): Update M_LI_DD similarly to match_float_constant. Generate
MTHC1 when available. Check that correct code can be generated for
fp=xx and fp=64 ABIs.
(parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
options.
(mips_convert_ase_flags): New static function.
(mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
to determine when to add the EF_MIPS_FP64 flag. Populate the
.MIPS.abiflags section.
(md_mips_end): Update .gnu_attribute based on command line and .module
as applicable. Use check_fpabi to ensure .gnu.attribute and command
line/.module options are consistent.
* doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
-mfpxx, -modd-spreg and -mno-odd-spreg options.
* doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
gnu_attribute values and FP ABIs.
2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com>
Add RTEMS target support and simplify matching
* gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
(or1k*-*-*): Use or1k* to match or1knd and or1kZ.
2014-07-27 Anthony Green <green@moxielogic.com>
* configure.tgt (generic_target): Add moxie-*-moxiebox*
* config/tc-moxie.c: Remove moxie_target_format.
(md_begin): Set default target_big_endian.
* config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
(TARGET_FORMAT): Set based on target_big_endian.
2014-07-26 Alan Modra <amodra@gmail.com>
* config/bfin-parse.y: Don't include obstack.h.
* config/obj-aout.c: Likewise.
* config/obj-coff.c: Likewise.
* config/obj-som.c: Likewise.
* config/tc-bfin.c: Likewise.
* config/tc-i960.c: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-tic4x.c: Likewise.
* expr.c: Likewise.
* listing.c: Likewise.
* config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
* config/tc-aarch64.c (symbol_locate): Likewise.
* config/tc-arm.c (symbol_locate): Likewise.
* config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
* config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
(s3_build_dependency_insn_hsh): Likewise.
* config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
(s7_build_dependency_insn_hsh): Likewise.
* frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
(frag_new): Make parameter a size_t.
(frag_var_init): Make max_chars and var parameters size_t.
(frag_var, frag_variant): Likewise.
(frag_room): Return a size_t.
(frag_align_pattern): Make n_fill parameter a size_t.
* frags.h: Update function prototypes.
* symbols.c (save_symbol_name): Make name_length a size_t.
2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
Alexander Ivchenko <alexander.ivchenko@intel.com>
Maxim Kuznetsov <maxim.kuznetsov@intel.com>
Sergey Lega <sergey.s.lega@intel.com>
Anna Tikhonova <anna.tikhonova@intel.com>
Ilya Tocar <ilya.tocar@intel.com>
Andrey Turetskiy <andrey.turetskiy@intel.com>
Ilya Verbin <ilya.verbin@intel.com>
Kirill Yukhin <kirill.yukhin@intel.com>
Michael Zolotukhin <michael.v.zolotukhin@intel.com>
* config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
* doc/c-i386.texi: Document avx512dq/.avx512dq.
2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
Alexander Ivchenko <alexander.ivchenko@intel.com>
Maxim Kuznetsov <maxim.kuznetsov@intel.com>
Sergey Lega <sergey.s.lega@intel.com>
Anna Tikhonova <anna.tikhonova@intel.com>
Ilya Tocar <ilya.tocar@intel.com>
Andrey Turetskiy <andrey.turetskiy@intel.com>
Ilya Verbin <ilya.verbin@intel.com>
Kirill Yukhin <kirill.yukhin@intel.com>
Michael Zolotukhin <michael.v.zolotukhin@intel.com>
* config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
* doc/c-i386.texi: Document avx512bw/.avx512bw.
2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
Alexander Ivchenko <alexander.ivchenko@intel.com>
Maxim Kuznetsov <maxim.kuznetsov@intel.com>
Sergey Lega <sergey.s.lega@intel.com>
Anna Tikhonova <anna.tikhonova@intel.com>
Ilya Tocar <ilya.tocar@intel.com>
Andrey Turetskiy <andrey.turetskiy@intel.com>
Ilya Verbin <ilya.verbin@intel.com>
Kirill Yukhin <kirill.yukhin@intel.com>
Michael Zolotukhin <michael.v.zolotukhin@intel.com>
* config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
(build_vex_prefix): Don't abort on VEX.W.
(check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
(check_VecOperations): Ditto.
* doc/c-i386.texi: Document avx512vl/.avx512vl.
2014-07-21 Joel Sherrill <joel.sherrill@oarcorp.com>
Add or reactivate or1k-*-rtems*
* gas/configure.tgt (or1k-*-rtems*): Add.
2014-07-17 Ilya Tocar <ilya.tocar@intel.com>
* config/tc-i386.c (parse_register): Set need_vrex.
2014-07-15 Jiong Wang <jiong.wang@arm.com>
* config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
sign extension. Casting the type of imm1 and imm2 to offsetT. Fix
one logic error when checking X_op.
2014-07-14 Andreas Schwab <schwab@linux-m68k.org>
* config/tc-m68k.c (md_convert_frag_1): Don't complain with
--pcrel about TAB (DBCCLBR, LONG) conversion.
2014-07-12 David Majnemer <david.majnemer@gmail.com>
* read.c (assign_symbol): Don't force "set" symbols local for PE.
2014-07-08 Jiong Wang <jiong.wang@arm.com>
* config/tc-arm.c (literal_pool): New field "alignment".
(find_or_make_literal_pool): Initialize "alignment" to 2.
(s_ltorg): Align the pool using value of "alignment"
(parse_big_immediate): New parameter "in_exp". Return
parsed expression if "in_exp" is not null.
(parse_address_main): Invoke "parse_big_immediate" for
constant parameter.
(add_to_lit_pool): Add one parameter 'nbytes'.
Split 8 byte entry into two 4 byte entry.
Add padding to align 8 byte entry to 8 byte boundary.
(encode_arm_cp_address): Generate literal pool entry if possible.
(move_or_literal_pool): Generate entry for vldr case.
(enum lit_type): New enum type.
(do_ldst): Use new enum type.
(do_ldstv4): Likewise.
(do_t_ldst): Likewise.
(neon_write_immbits): Support Thumb-2 mode.
2014-07-07 Barney Stratford <barney_stratford@fastmail.fm>
* config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
name as [xyz][hl]. Permit using a symbol whoes name begins with
‘r’ to refer to a register.
Allow arbitrary expressions for the P and p operators.
(md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
BFD_RELOC_AVR_PORT6 relocations.
2014-07-04 Alan Modra <amodra@gmail.com>
* doc/internals.texi: Update "configure.in" comments.
* acinclude.m4: Likewise.
* config/tc-sparc.c: Likewise.
2014-07-04 Alan Modra <amodra@gmail.com>
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* doc/Makefile.in: Regenerate.
2014-07-04 Alan Modra <amodra@gmail.com>
* doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
* doc/Makefile.in: Regenerate.
2014-07-04 Alan Modra <amodra@gmail.com>
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
2014-07-01 Barney Stratford <barney_stratford@fastmail.fm>
Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
Pitchumani Sivanupandi <pitchumani.s@atmel.com>
Soundararajan <Sounderarajan.D@atmel.com>
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for
avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and
encode.
(md_assemble): check ISA for arch and issue diagnostic.
* NEWS: Mention new support.
* doc/c-avr.texi: Document support for avrtiny architecture.
2014-06-27 Alan Modra <amodra@gmail.com>
* config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
(obj_mach_o_frob_label): Avoid cascading errors.
(obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
2014-06-18 DJ Delorie <dj@redhat.com>
* config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
suffix optional.
2014-06-17 Hans-Peter Nilsson <hp@bitrange.com>
* config/tc-mmix.c (loc_assert_s): New member frag.
(s_loc): Set it.
(mmix_md_end): If an error is reported for a LOC expression, patch
up the related frag.
2014-06-17 Chris Metcalf <cmetcalf@tilera.com>
PR gas/16908
* macro.c (buffer_and_nest): Honour #line directives inside
macros.
2014-06-17 Jiong Wang <jiong.wang@arm.com>
* config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
2014-06-17 Hans-Peter Nilsson <hp@axis.com>
* config/tc-cris.c (cris_bad): New function.
(cris_process_instruction): Where applicable, use it instead of
as_bad.
2014-06-16 Nick Clifton <nickc@redhat.com>
* config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
2014-06-16 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (END_OF_INSN): New macro.
(parse_operands): Handle operand given and in wrong format when
operand is optional.
2014-06-16 Alan Modra <amodra@gmail.com>
* write.h (subsegs_finish): Delete declaration.
* write.c (subsegs_finish): Make static.
(write_object_file): Call subsegs_finish from here. Don't print
warning and error count here..
* as.c (main): ..do so here instead. Remove dead code for "no
object file generated". Split out count strings to better support
internationalisation. Don't call subsegs_finish. Tidy setting of
"keep_it". Run write_object_file even after errors.
(keep_it): Make static.
* config/obj-elf.c (elf_frob_symbol): Remove assert.
(elf_frob_file_before_adjust): Likewise.
2014-06-16 Alan Modra <amodra@gmail.com>
* config/tc-dlx.c (machine_ip): Move initialisation of the_insn
earlier.
2014-06-16 Alan Modra <amodra@gmail.com>
* config/tc-i386.c (reloc): Don't avoid pcrel check for
BFD_RELOC_SIZE64. Return NO_RELOC on failing pcrel check.
2014-06-16 Alan Modra <amodra@gmail.com>
* config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
(tic6x_output_exidx_entry): Likewise.
(md_apply_fix): Simplify 1 byte md_number_to_chars.
2014-06-16 Alan Modra <amodra@gmail.com>
* config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
end of archive to temp file.
(tic54x_start_line_hook): Start scan for parallel on next line,
not one char into next line (which may overrun the buffer).
2014-06-16 Alan Modra <amodra@gmail.com>
* config/tc-vax.c (md_apply_fix): Rewrite.
(tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
define rather than the equivalent BFD_RELOC_NONE.
2014-06-16 Alan Modra <amodra@gmail.com>
* config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
(md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
and BFD_RELOC_ARM_TLS* relocs. Simplify BFD_RELOC_8 case.
2014-06-16 Alan Modra <amodra@gmail.com>
* config/tc-cris.c (md_create_long_jump): Follow "short" jump
with a nop rather than leaving uninitialised.
2014-06-13 Chen Gang <gang.chen.5i5j@gmail.com>
* config/tc-score7.c: Replace sprintf with strcpy where
appropriate.
(s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
frag.
* config/tc-score.c (s3_relax_branch_inst16): Likewise.
(s3_relax_cmpbranch_inst32): Likewise.
2014-06-07 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
in 64-bit mode.
2014-06-02 Martin Storsjo <martin@martin.st>
* doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
2014-06-05 Joel Brobecker <brobecker@adacore.com>
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
2014-06-03 Nick Clifton <nickc@redhat.com>
* config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
(OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
* doc/c-msp430.texi: Update command line option description.
2014-05-22 Alan Modra <amodra@gmail.com>
* listing.c (listing_warning, listing_error): Add space after colon.
* messages.c (as_warn_internal, as_bad_internal): Use the same
string as above.
2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (file_mips_opts_checked): New static global.
(s_module): New static function.
(file_ase): Remove.
(mips_pseudo_table): Add .module handler.
(mips_set_ase): Add opts argument and use instead of mips_opts.
(md_assemble): Use file_mips_check_options.
(md_parse_option): Update to use file_mips_opts instead of mips_opts.
(mips_set_architecture): Delete function. Moved to...
(mips_after_parse_args): Here. All logic now applies to
file_mips_opts first and then copies the final state to mips_opts.
Move error checking and defaults inference to mips_check_options and
file_mips_check_options.
(mips_check_options): New static function. Common option checking for
command line, .module and .set. Use .module values in error messages
instead of refering to command line options.
(file_mips_check_options): New static function. A wrapper for
mips_check_options with file_mips_opts. Updates BFD arch based on
final options.
(s_mipsset): Split into s_mipsset and parse_code_option. Settings
supported by both .set and .module are moved to parse_code_option.
Warnings and errors are kept in s_mipsset because when
parse_code_option is used with s_module the warnings are deferred
until code is generated. Any setting supporting 'default' value is
kept in s_mipsset as it is not applicable to s_module. Inferred
settings are also kept in s_mipsset as s_module does not infer any
settings. Use mips_check_options.
(parse_code_option): New static function derived from s_mipsset.
(s_module): New static function that implements .module. Allows file
level settings to be changed until code is generated.
(s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
(s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
(mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
(md_mips_end): Use file_mips_check_options.
* doc/c-mips.texi: Document .module.
2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
* messages.c (as_warn_internal): Remove extra whitespace from
warning messages.
2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (FP64_ASES): Add ASE_MSA.
(mips_after_parse_args): Do not select ASE_MSA without -mfp64.
2014-05-20 Mike Stump <mikestump@comcast.net>
* messages.c (as_warn_internal): Ensure we don't interleave output
within a single line when make -j is used.
(as_bad_internal): Likewise.
2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
* config/obj-elf.h (obj_elf_seen_attribute): Declare.
* config/obj-elf.c (recorded_attribute_info): New structure.
(recorded_attributes): New variable.
(record_attribute, obj_elf_seen_attribute): New functions.
(obj_elf_vendor_attribute): Record which attributes have been seen.
2014-05-20 Nick Clifton <nickc@redhat.com>
* config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
(msp430_srcoperand): Store vshift value in operand.
2014-05-19 Nick Clifton <nickc@redhat.com>
PR gas/16858
* config/tc-i386.c (md_apply_fix): Improve the detection of code
symbols for 32-bit PE targets.
2014-05-18 Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (md_obj_begin): Delete.
(md_obj_end): Fold into...
(md_mips_end): ...here. Move to end of file.
2014-05-17 Nick Clifton <nickc@redhat.com>
PR gas/16946
* config/tc-v850.c (handle_ctoff): Generate an error if called
when using the RH850 ABI.
2014-05-16 Kaushik Phata <Kaushik.Phatak@kpit.com>
* config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
and OPTION_64BIT_DOUBLES.
(md_longopts): Add -m32bit-doubles and -m64bit-doubles.
(md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
(md_show_usage): Show all of the RL78 options.
(rl78_float_cons): New static functions.
(md_pseudo_table): Update handler for "double".
* doc/c-rl78.texi: Document new options.
* doc/as.texinfo: Likewise.
2014-05-13 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
(HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
(HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
(GPR_SIZE, FPR_SIZE): New macros. Use throughout.
2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (md_parse_option): Update missed file_mips_isa
references.
2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
(file_mips_gp32, file_mips_fp32, file_mips_soft_float,
file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
one struct...
(file_mips_opts): Here. New static global. Update throughout.
(mips_opts): Update defaults for gp32 and fp.
2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c (streq): Define.
(mips_convert_symbolic_attribute): New function.
* config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
(mips_convert_symbolic_attribute): New prototype.
2014-05-02 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
fixups as signed.
2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com>
* tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
and mips64r5.
(ISA_HAS_64BIT_FPRS): Likewise.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
(ISA_HAS_DROR): Likewise.
(options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
OPTION_MIPS64R5.
(mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
(md_parse_option): Likewise.
(s_mipsset): Likewise.
(mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
and mips64r5. Also change p5600 entry to be mips32r5.
* configure.in: Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
-mips64r5 command line options.
* doc/as.texinfo: Likewise.
2014-04-28 Nick Clifton <nickc@redhat.com>
PR gas/16858
* config/tc-i386.c (md_apply_fix): Do not adjust value of
pc-relative fixes against weak symbols.
2014-04-26 Alan Modra <amodra@gmail.com>
* po/POTFILES.in: Regenerate.
2014-04-24 Nick Clifton <nickc@redhat.com>
* config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
based targets.
2014-04-23 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (s_ltorg): Call make_mapping_symbol
directly instead of mapping_state.
2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com>
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
2014-04-22 Sandra Loosemore <sandra@codesourcery.com>
* config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
unbreak self-test mode.
2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_handle_align): record alignment for the
first section frag.
2014-04-22 Christian Svensson <blue@cmd.nu>
* Makefile.am: Remove openrisc and or32 support. Add support for or1k.
* configure.in: Likewise.
* configure.tgt: Likewise.
* doc/as.texinfo: Likewise.
* config/obj-coff.h: Likewise.
* config/tc-or1k.c: New file.
* config/tc-or1k.h: New file.
* config/tc-openrisc.c: Delete.
* config/tc-openrisc.h: Delete.
* config/tc-or32.c: Delete.
* config/tc-or32.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
2014-04-16 Alan Modra <amodra@gmail.com>
* config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
* config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
2014-04-10 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
* config/tc-avr.c: Add new flag mlink-relax.
(md_show_usage): Add flag and help text.
(md_parse_option): Record whether link relax is turned on.
(relaxable_section): New.
(avr_validate_fix_sub): New.
(avr_force_relocation): New.
(md_apply_fix): Generate DIFF reloc.
(avr_allow_local_subtract): New.
* config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
(TC_FORCE_RELOCATION): Define.
(TC_FORCE_RELOCATION_SUB_SAME): Define.
(TC_VALIDATE_FIX_SUB): Define.
(avr_force_relocation): Declare.
(avr_validate_fix_sub): Declare.
(md_allow_local_subtract): Define.
(avr_allow_local_subtract): Declare.
2014-04-10 Andrew Bennett <andrew.bennett@imgtec.com>
* config/tc-mips.c (mips_cpu_info_table): Add P5600
configuation.
* doc/c-mips.texi: Document p5600.
2014-04-09 Nick Clifton <nickc@redhat.com>
* config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
* config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
* config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
* read.c (emit_expr_fix): Mark the r parameter as potentially
unused.
2014-04-09 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
New static vars.
(md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
(ppc_elf_cons_fix_check): New function.
(md_assemble): Set last_insn, last_seg, last_subseg.
(ppc_byte, md_apply_fix): Handle warn_476.
* config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
(ppc_elf_cons_fix_check): Declare.
* read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
2014-04-09 Alan Modra <amodra@gmail.com>
* gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
* gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
* gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
(TC_CONS_FIX_NEW): Add RELOC parameter.
* gas/config/tc-arm.c (cons_fix_new_arm): Similarly
* gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
* gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
* gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
* gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
Similarly.
* gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
* gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
* gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
* gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
* gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
* gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
* gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
* gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
Similarly.
* gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
* gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
Similarly.
* gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
* gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
* gas/config/tc-avr.c (exp_mod_data): Make global.
(pexp_mod_data): Delete.
(avr_parse_cons_expression): Return exp_mod_data pointer.
(avr_cons_fix_new): Add exp_mod_data_t pointer param.
(exp_mod_data_t): Move typedef..
* gas/config/tc-avr.h: ..to here.
(exp_mod_data): Declare.
(TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
(avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
(TC_CONS_FIX_NEW): Update.
* gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
(cons_fix_new_hppa): Add hppa_field_selector param.
(fix_new_hppa): Adjust.
(parse_cons_expression_hppa): Return field selector.
* gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
(cons_fix_new_hppa): Likewise.
(TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
* gas/config/tc-i386.c (got_reloc): Delete static var.
(x86_cons_fix_new): Add reloc param.
(x86_cons): Return got reloc.
* gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
(TC_CONS_FIX_NEW): Add RELOC param.
* gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param. Adjust
calls.
* gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
(TC_CONS_FIX_NEW): Add reloc param.
* gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
Return reloc.
(cons_fix_new_microblaze): Add reloc param.
* gas/config/tc-microblaze.h: Formatting.
(parse_cons_expression_microblaze): Update proto.
(cons_fix_new_microblaze): Likewise.
* gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
(nios2_cons): Return ldo reloc.
(nios2_cons_fix_new): Delete.
* gas/config/tc-nios2.h (nios2_cons): Update prototype.
(nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
* gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
short. Make llong use cons.
(ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
(ppc_elf_cons): Delete.
(ppc_elf_parse_cons): New function.
(ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
(md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
* gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
(ppc_elf_parse_cons): Declare.
* gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
(sparc_cons): Return reloc specifier.
(cons_fix_new_sparc): Add reloc specifier param.
(sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
* gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
(TC_PARSE_CONS_RETURN_NONE): Define.
(sparc_cons, cons_fix_new_sparc): Update prototype.
* gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
(v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
(md_assemble): Likewise.
(parse_cons_expression_v850): Return reloc.
(cons_fix_new_v850): Add reloc parameter.
* gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
(cons_fix_new_v850): Likewise.
* gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
(vax_cons): Return reloc.
(vax_cons_fix_new): Add reloc parameter.
* gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
* gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
* gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
* gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
(emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
* gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
(do_parse_cons_expression): Adjust.
(cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
to emit_expr_with_reloc.
(emit_expr_with_reloc): New function handling reloc, mostly
extracted from..
(emit_expr): ..here.
(emit_expr_fix): Add reloc param. Adjust TC_CONS_FIX_NEW invocation.
Handle reloc.
(parse_mri_cons): Convert to ISO.
* gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
(TC_PARSE_CONS_RETURN_NONE): Define.
(emit_expr_with_reloc): Declare.
(emit_expr_fix): Update prototype.
* gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
2014-04-03 Ilya Tocar <ilya.tocar@intel.com>
* config/tc-i386.c (cpu_arch): Add .se1.
* doc/c-i386.texi: Document .se1/se1.
2014-04-02 DJ Delorie <dj@redhat.com>
* config/tc-rl78.c (md_apply_fix): Add overflow warnings for
pc-relative branches.
2014-04-02 Nick Clifton <nickc@redhat.com>
PR gas/16765
* config/tc-arm.c (create_unwind_entry): Report an error if an
attempt to recreate an unwind directive is encountered.
2014-03-27 Nick Clifton <nickc@redhat.com>
* config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
sprintf in order to avoid a compile time warning.
2014-03-26 Nick Clifton <nickc@redhat.com>
* config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
relocation is used on an 8-bit operand or vice versa.
(tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
(md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
2014-03-25 Nick Clifton <nickc@redhat.com>
* config/obj-coff-seh.c (obj_coff_seh_code): New function -
switches the current segment back to the code segment recorded
when seh_proc was last invoked.
* config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
2014-03-25 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
(md_assemble): Likewise. Warn.
2014-03-21 David Weatherford <weath@cadence.com>
Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_check_frag_count)
xtensa_create_trampoline_frag,
xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
find_trampoline_seg, search_trampolines, get_best_trampoline,
check_and_update_trampolines, add_jump_to_trampoline,
dump_trampolines): New functions.
(md_parse_option): Add cases for --[no-]trampolines options.
(md_assemble, finish_vinsn, xtensa_end): Add call to
xtensa_check_frag_count.
(xg_assemble_vliw_tokens): Add call to
xtensa_maybe_create_trampoline_frag.
(xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
(relax_frag_immed): Relax jump instructions that cannot reach its
target.
* config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
relax state.
* doc/as.texinfo: Document --[no-]trampolines command-line options.
* doc/c-xtensa.texi: Document trampolines relaxation and command
line options.
* frags.c (get_frag_count, clear_frag_count): New function.
(frag_alloc): Increment totalfrags counter.
* frags.h (get_frag_count, clear_frag_count): New function.
2014-03-20 DJ Delorie <dj@redhat.com>
* config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
* config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
rl78_relax().
* config/tc-rl78.h (md_relax_frag): Define.
(rl78_relax_frag): Declare.
* config/tc-rl78.c (rl78_relax): Add.
(md_assemble): Set up the variable frags also when relaxing.
(op_type_T): New.
(rl78_opcode_type): New.
(rl78_frag_fix_value): New.
(md_estimate_size_before_relax): New-ish.
(rl78_relax_frag): New.
(md_convert_frag): New-ish.
2014-03-20 Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
* config/tc-mips.c (md_pcrel_from): Remove error message.
(md_apply_fix): Convert PC-relative BFD_RELOC_32s to
BFD_RELOC_32_PCREL. Report a specific error message for unhandled
PC-relative expressions. Handle BFD_RELOC_8.
2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (hpriv_reg_table): Added entries for
%hstick_offset and %hstick_enable.
* doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
%hstick_enable hyperprivileged registers.
2014-03-19 Daniel Gutson <daniel.gutson@tallertechnologies.com>
Nick Clifton <nickc@redhat.com>
* config/tc-arm.c (codecomposer_syntax): New flag that states whether the
CCS syntax compatibility mode is on or off.
(asmfunc_states): New enum to represent the asmfunc directive state.
(asmfunc_state): New variable holding the asmfunc directive state.
(comment_chars): Rename to arm_comment_chars.
(line_separator_chars): Rename to arm_line_separator_chars.
(s_ccs_ref): New function that handles the .ref directive.
(asmfunc_debug): New function.
(s_ccs_asmfunc): New function that handles the .asmfunc directive.
(s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
(s_ccs_def): New function that handles the .def directive.
(tc_start_label_without_colon): New function.
(md_pseudo_table): Added new CCS directives.
(arm_ccs_mode): New function that handles the -mccs command line option.
(arm_long_opts): Added new -mccs command line option.
* config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
(TC_START_LABEL_WITHOUT_COLON): New macro.
(tc_start_label_without_colon): Added extern function declaration.
(tc_comment_chars): Define.
(tc_line_separator_chars): Define.
* app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
* read.c (read_begin): Likewise.
* doc/as.texinfo: Add documentation for the -mccs command line
option.
* doc/c-arm.texi: Likewise.
* doc/internals.texi: Document tc_line_separator_chars.
* NEWS: Mention the new feature.
2014-03-18 Jiong Wang <jiong.wang@arm.com>
* config/tc-aarch64.c (aarch64_opts): Add new option
"mno-verbose-error".
(verbose_error_p): Initialize to 1.
* doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
and -mno-verbose-error.
2014-03-17 Nick Clifton <nickc@redhat.com>
PR gas/16694
* config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
registers as well.
2014-03-13 Richard Earnshaw <rearnsha@arm.com>
Jiong Wang <Jiong.Wang@arm.com>
* doc/c-aarch64.texi: Clean up some formatting issues.
(AArch64 Options): Document -mcpu and -march.
(AArch64 Extensions): New node.
2014-03-13 Tristan Gingold <gingold@adacore.com>
* config/tc-i386.c (use_big_obj): Declare.
(OPTION_MBIG_OBJ): Define.
(md_longopts): Add -mbig-obj option.
(md_parse_option): Handle it.
(md_show_usage): Display help for this option.
(i386_target_format): Use bigobj for x86-64 if -mbig-obj.
* doc/c-i386.texi: Document the option.
2014-03-12 Nick Clifton <nickc@redhat.com>
PR gas/16688
* config/tc-aarch64.c (literal_expression): New structure.
(literal_pool): Replace exp array with literal_expression array.
(add_to_lit_pool): When adding a bignum cache the big value.
(s_ltorg): When emitting a bignum initialise the global bignum
array from the cached value.
2014-03-12 Alan Modra <amodra@gmail.com>
* Makefile.in: Regenerate.
* config.in: Regenerate.
* doc/Makefile.in: Regenerate.
2014-03-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
Vishnu KS <Vishnu.k_s@atmel.com>
Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
* gas/tc-avr.c: Add new devices
avr25: ata5272, attiny828
avr35: ata5505, attiny1634
avr4: atmega8a, ata6285, ata6286, atmega48pa
avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
atmega16hva2
avr51: atmega128a, atmega1284
avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
atxmega32e5, atxmega16e5, atxmega8e5
avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
atxmega64c3, atxmega64d4
avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
atxmega256c3, atxmega384c3, atxmega384d3
avrxmega7: atxmega128a4u
* doc/c-avr.texi: Ditto.
2014-03-05 Alan Modra <amodra@gmail.com>
Update copyright years.
2014-03-05 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
(md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
2014-03-05 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (md_assemble): Move code adjusting reloc types
later. Merge absolute and relative branch reloc selection.
Generate 16-bit relocs for most 16-bit insn fields given a
non-constant expression.
2014-03-05 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
(md_assemble): Don't call ppc_is_toc_sym for ELF.
2014-03-04 Heiher <r@hev.cc>
* config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
Loongson-3A.
2014-03-03 Nick Clifton <nickc@redhat.com>
* config/msp430/msp430.c: Replace known mcu array with known
msp430 ISA mcu name array.
Accept any name for -mmcu option.
Add -mz option to warn about missing NOP following an interrupt
status change.
(check_for_nop): New.
(msp430_operands): Emit a warning, if requested, when an interrupt
changing instruction is not followed by a NOP.
* doc/c-msp430.c: Document -mz option.
2014-03-03 Alan Modra <amodra@gmail.com>
* config/bfin-lex-wrapper.c: Correct copyright date.
* config/obj-fdpicelf.c: Likewise.
* config/obj-fdpicelf.h: Likewise.
* config/tc-frv.c: Correct copyright punctuation.
* config/tc-ip2k.c: Likewise.
* config/tc-iq2000.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic4x.h: Likewise.
2014-03-01 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
* config/tc-avr.c: Remove atxmega16x1.
2014-02-28 Alan Modra <amodra@gmail.com>
* dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
field for 64-bit dwarf.
2014-02-21 Ilya Tocar <ilya.tocar@intel.com>
* config/tc-i386.c (cpu_arch): Add .prefetchwt1.
* doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
2014-02-12 Ilya Tocar <ilya.tocar@intel.com>
* config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
* doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
clflushopt/.clfushopt.
2014-02-10 Alan Modra <amodra@gmail.com>
* po/POTFILES.in: Regenerate.
* po/gas.pot: Regenerate.
2014-02-03 Sandra Loosemore <sandra@codesourcery.com>
* config/tc-nios2.c (md_apply_fix): Test for new relocs.
(nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
%got_hiadj relocation operators. Sort table and add comment
to explain ordering.
(nios2_fix_adjustable): Test for new relocs.
* doc/c-nios2.texi (Nios II Relocations): Document new relocation
operators.
2014-01-30 Sandra Loosemore <sandra@codesourcery.com>
* config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
(nios2_assemble_args_m): Likewise.
(md_assemble): Likewise.
2014-01-24 DJ Delorie <dj@redhat.com>
* config/tc-msp430.c (msp430_section): Always flag data sections,
regardless of -md.
(msp430_frob_section): New. Make sure all sections are noticed if
they have content.
(msp430_lcomm): New. Flag bss if .lcomm is seen.
(msp430_comm): New. Likewise.
(md_pseudo_table): Add them.
* config/tc-msp430.h (msp430_frob_section): Declare.
(tc_frob_section): Define.
2014-01-23 Nick Clifton <nickc@redhat.com>
* config/tc-msp430.c (show_mcu_list): Delete.
(md_parse_option): Accept any MCU name. Accept several more
variants for the -mcpu option.
(md_show_usage): Do not call show_mcu_list.
2014-01-22 DJ Delorie <dj@redhat.com>
* config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
* doc/c-msp430.texi (MSP430 Directives): Document it.
2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
* config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
gather assert.
2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
PR gas/16489
* config/tc-i386.c (check_VecOperands): Add check for invalid
register set in AVX512 gathers.
2014-01-22 Alan Modra <amodra@gmail.com>
* config/tc-tic4x.c (md_shortopts): s/CONST/const/.
2014-01-21 DJ Delorie <dj@redhat.com>
* config/tc-rl78.c (require_end_of_expr): New.
(md_operand): Call it.
(rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
as not overflowing.
2014-01-17 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
for the s32.f64 flavours of VCVT.
2014-01-14 Nick Clifton <nickc@redhat.com>
PR gas/16434
* config/tc-z80.c (wrong_match): Provide format string to
as_warn.
(parse_exp_not_indexed): Delete unused variable dummy.
(emit_byte): Delete unused variable fixp.
2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (regbnd): Removed.
(vec_disp8): Likewise.
2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Update copyright year to 2014.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-tic30.c (debug): Avoid old VA_* compatibility
wrappers.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
use PARAMS.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
2013-01-07 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
For older changes see ChangeLog-2013
Copyright (C) 2014 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: