| # Copyright 1998-2021 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| # This file was written by Elena Zannoni (ezannoni@cygnus.com) |
| |
| |
| |
| standard_testfile |
| |
| # Some targets can't call functions, so don't even bother with this |
| # test. |
| if [target_info exists gdb,cannot_call_functions] { |
| unsupported "this target can not call functions" |
| continue |
| } |
| |
| # Create and source the file that provides information about the compiler |
| # used to compile the test case. |
| |
| if [get_compiler_info] { |
| return -1 |
| } |
| |
| set skip_float_test [gdb_skip_float_test] |
| |
| if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} { |
| return -1 |
| } |
| |
| |
| set oldtimeout $timeout |
| set timeout [expr "$timeout + 60"] |
| |
| gdb_test_no_output "set print sevenbit-strings" |
| gdb_test_no_output "set print address off" |
| gdb_test_no_output "set width 0" |
| |
| |
| if ![runto_main] then { |
| perror "couldn't run to breakpoint" |
| continue |
| } |
| |
| get_debug_format |
| |
| set stop_line [gdb_get_line_number "-tbreak1-"] |
| gdb_test "tbreak $stop_line" \ |
| "Temporary breakpoint ${decimal}.*file.*$srcfile, line $stop_line.*" \ |
| "tbreakpoint at tbreak1" |
| |
| gdb_test continue \ |
| "Continuing\\..*main \\(\\) at.*$srcfile:$stop_line.*" \ |
| "run until breakpoint set at a line" |
| |
| |
| #call print_double_array(double_array) |
| if {!$skip_float_test && \ |
| ![gdb_skip_stdio_test "print print_double_array(double_array)"] } { |
| |
| gdb_test_stdio "print print_double_array(double_array)" \ |
| [multi_line \ |
| "array_d :" \ |
| "=========" \ |
| "" \ |
| "0.000000 *" \ |
| "23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]"] |
| } |
| |
| #call print_char_array(char_array) |
| |
| set array_c_re \ |
| [multi_line \ |
| "array_c :" \ |
| "=========" \ |
| "" \ |
| "Z" \ |
| "aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" \ |
| "aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" \ |
| "aZaZaZaZaZaZaZaZaZa"] |
| |
| if ![gdb_skip_stdio_test "print_char_array(char_array)"] { |
| gdb_test_stdio "print print_char_array(char_array)" $array_c_re |
| } |
| |
| set stop_line [gdb_get_line_number "-tbreak2-"] |
| gdb_test "tbreak $stop_line" \ |
| "Temporary breakpoint.*file.*$srcfile, line $stop_line.*" \ |
| "tbreakpoint at tbreak2" |
| |
| if ![gdb_skip_stdio_test "continue to tbreak2"] { |
| set gdb_re \ |
| [multi_line \ |
| "main.*at.*:\[0-9\]+" \ |
| "\[0-9\]+.*print_double_array\\(double_array\\).*"] |
| gdb_test_stdio "continue" $array_c_re $gdb_re "continue to tbreak2" |
| } else { |
| gdb_test "continue" ".*" "" |
| } |
| |
| # I am disabling this test, because it takes too long. I verified by |
| # hand that it works, feel free to check for yourself. |
| #call print_all_arrays(integer_array, char_array, float_array, double_array) |
| #send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n" |
| #gdb_expect { |
| # -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1 -2 -3 -4 -5 -6 -7 -8\[ \t\r\n\]+-9 -10 -11 -12 -13 -14 -15 -16\[ \t\r\n\]+-17 -18 -19 -20 -21 -22 -23 -24\[ \t\r\n\]+-25 -26 -27 -28 -29 -30 -31 -32\[ \t\r\n\]+-33 -34 -35 -36 -37 -38 -39 -40\[ \t\r\n\]+-41 -42 -43 -44 -45 -46 -47 -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450 0.284900 0.427350 0.569801 0.712251 0.854701 0.997151 1.139601\[ \t\r\n\]+1.282051 1.424501 1.566952 1.709402 1.851852 1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800\[ \t\r\n\]+586.41750 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200\[ \t\r\n\]+2275.299900 2298.756600 2322.213300.*$gdb_prompt $" { |
| # pass "print print_all_arrays(integer_array, char_array, float_array, double_array)" |
| # } |
| # -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" } |
| # timeout { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" } |
| # } |
| |
| #set timeout $oldtimeout |
| set stop_line [gdb_get_line_number "-tbreak3-"] |
| gdb_test "tbreak $stop_line" \ |
| "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ |
| "tbreakpoint at tbreak3" |
| |
| if {!$skip_float_test && \ |
| ![gdb_skip_stdio_test "continuing to tbreak3"] } { |
| |
| gdb_test_stdio "continue" \ |
| [multi_line \ |
| "array_d :" \ |
| "=========" \ |
| "" \ |
| "0.000000 *" \ |
| "23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]* *" \ |
| "" \ |
| "" \ |
| "array_f :" \ |
| ".*" \ |
| "student id :\[\t \]+.*YELLOW" \ |
| "array_i :" \ |
| ] \ |
| "main \\(\\) at .*call-ar-st.c:\[0-9\]+\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)..*" \ |
| "continuing to tbreak3" |
| |
| } else { |
| gdb_test "continue" ".*" "" |
| } |
| |
| #step |
| set stop_line [gdb_get_line_number "-step1-"] |
| gdb_test "step" \ |
| "print_all_arrays \\(array_i=<integer_array.*>, array_c=<char_array.*> .ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=<float_array.*>, array_d=<double_array.*>\\) at .*$srcfile:$stop_line\[ \t\r\n\]+$stop_line.*print_int_array\\(array_i\\);.*" \ |
| "step inside print_all_arrays" |
| |
| #step -over |
| if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] { |
| set stop_line [gdb_get_line_number "-next1-"] |
| gdb_test_stdio "next" \ |
| "array_i :" \ |
| "$stop_line.*print_char_array.*" \ |
| "next over print_int_array in print-all_arrays" |
| } else { |
| gdb_test "next" ".*" "" |
| } |
| |
| #call print_double_array(array_d) |
| if {!$skip_float_test && \ |
| ![gdb_skip_stdio_test "print print_double_array(array_d)"] } { |
| |
| gdb_test_stdio "print print_double_array(array_d)" \ |
| [multi_line \ |
| "array_d :" \ |
| "=========" \ |
| "" \ |
| "0.000000 *" \ |
| "23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" \ |
| ] |
| } |
| |
| set stop_line [gdb_get_line_number "-tbreak4-"] |
| gdb_test "tbreak $stop_line" \ |
| "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ |
| "tbreakpoint at tbreak4" |
| |
| if {!$skip_float_test && \ |
| ![gdb_skip_stdio_test "continuing to tbreak4"] } { |
| |
| gdb_test_stdio "continue" \ |
| [multi_line \ |
| "array_d :" \ |
| "=========" \ |
| "" \ |
| "0.000000 *" \ |
| "23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" \ |
| ] \ |
| "" \ |
| "continuing to tbreak4" |
| } else { |
| gdb_test "continue" ".*" "" |
| } |
| |
| |
| #call sum_array_print(10, *list1, *list2, *list3, *list4) |
| |
| if ![gdb_skip_stdio_test "print sum_array_print(...)"] { |
| |
| gdb_test_stdio "print sum_array_print(10, *list1, *list2, *list3, *list4)" \ |
| [multi_line \ |
| "Sum of 4 arrays, by element \\(add in seed as well\\): " \ |
| "" \ |
| "Seed: 10" \ |
| "Element Index . Sum " \ |
| "-------------------------" \ |
| ".*" \ |
| "\[ \t\]+0\[ \t\]+52" \ |
| "\[ \t\]+1\[ \t\]+60" \ |
| "\[ \t\]+2\[ \t\]+68" \ |
| "\[ \t\]+3\[ \t\]+76" \ |
| "\[ \t\]+4\[ \t\]+84" \ |
| "\[ \t\]+5\[ \t\]+92" \ |
| "\[ \t\]+6\[ \t\]+100" \ |
| "\[ \t\]+7\[ \t\]+108" \ |
| "\[ \t\]+8\[ \t\]+116" \ |
| "\[ \t\]+9\[ \t\]+124" \ |
| ] |
| } |
| |
| #step over |
| set stop_line [gdb_get_line_number "-next2-"] |
| if ![gdb_skip_stdio_test "next to next2"] { |
| gdb_test_stdio "next" \ |
| "BYE BYE FOR NOW" \ |
| "$stop_line.*printf\\(.VERY GREEN GRASS.n.\\);.*" \ |
| "next to next2" |
| } else { |
| gdb_test "next" ".*" "" |
| } |
| |
| #call print_array_rep(\*list1, \*list2, \*list3) |
| |
| if ![gdb_skip_stdio_test "print print_array_rep(...)"] { |
| gdb_test_stdio "print print_array_rep(\*list1, \*list2, \*list3)" \ |
| "Contents of linked list3:" |
| } |
| |
| set stop_line [gdb_get_line_number "-tbreak5-"] |
| gdb_test "tbreak $stop_line" \ |
| "Temporary breakpoint..* file .*$srcfile, line $stop_line.*" \ |
| "tbreakpoint at tbreak5" |
| |
| gdb_test "continue" \ |
| "main \\(\\) at .*$srcfile:$stop_line\r\n$stop_line\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*" \ |
| "continue to tbreak5" |
| |
| |
| # Run into sum_array_print, and verify that the arguments were passed |
| # accurately. |
| # |
| # Note that we shouldn't use a `step' here to get into |
| # sum_array_print; GCC may emit calls to memcpy to put the arguments |
| # in the right place, and a step may end up in memcpy instead. This |
| # may itself be a bug, but it's not the one we're trying to catch |
| # here. I've added something to step-test.exp for this. |
| gdb_test "break sum_array_print" \ |
| ".*Breakpoint ${decimal}: file .*$srcfile, line.*" \ |
| "set breakpoint in sum_array_print" |
| gdb_test_no_output "set print frame-arguments all" |
| gdb_test "continue" \ |
| ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*$srcfile:${decimal}\[ \t\n\r\]+${decimal}.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \ |
| "check args of sum_array_print" |
| |
| #call print_array_rep(linked_list1, linked_list2, linked_list3) |
| # this calls works from gdb without gdb_expect. But it does seem to hang |
| #from within gdb_expect. |
| #I comment this out |
| #send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n" |
| #gdb_expect { |
| # -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" { |
| # pass "print print_array_rep(linked_list1, linked_list2, linked_list3)" |
| # } |
| # -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" } |
| # timeout { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" } |
| #} |
| |
| |
| set stop_line [gdb_get_line_number "-tbreak6-"] |
| gdb_test "tbreak $stop_line" \ |
| "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ |
| "tbreakpoint at tbreak6" |
| |
| if ![gdb_skip_stdio_test "continuing to tbreak6"] { |
| gdb_test_stdio "continue" \ |
| "Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t" \ |
| "main \\(\\) at .*$srcfile:$stop_line.*c = 0.*" \ |
| "continue to tbreak6" |
| } else { |
| gdb_test "continue" ".*" "" |
| } |
| |
| #call print_small_structs(*struct1, *struct2, *struct3, *struct4, |
| # *flags, *flags_combo, *three_char, *five_char, |
| # *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3) |
| |
| if {!$skip_float_test && \ |
| ![gdb_skip_stdio_test "print print_small_structs(...)"] } { |
| gdb_test_stdio "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" \ |
| [multi_line \ |
| "alpha" \ |
| "gamma" \ |
| "epsilon" \ |
| "alpha" \ |
| "gamma" \ |
| "epsilon" \ |
| "ch1: y\[ \t\]*ch2: n" \ |
| "Contents of three_char_t: " \ |
| "" \ |
| "a\[ \t\]*b\[ \t\]*c" \ |
| "Contents of five_char_t: " \ |
| "" \ |
| "l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p" \ |
| "Contents of int_char_combo_t: " \ |
| "" \ |
| "123\[ \t\]*z" \ |
| "Sum of the 4 struct values and seed : " \ |
| "" \ |
| "\[ \t\]*52" \ |
| "Contents of struct1: " \ |
| "" \ |
| "\[ \t\]*6\[ \t\]*0" \ |
| "Contents of struct2: " \ |
| "" \ |
| "\[ \t\]*10\[ \t\]*0" \ |
| "Contents of struct3: " \ |
| "" \ |
| "\[ \t\]*12\[ \t\]*0" \ |
| "Contents of one_double_t: " \ |
| "" \ |
| "10.500000" \ |
| "Contents of one_double_t: " \ |
| "" \ |
| "-3.375000" \ |
| "Contents of one_double_t: " \ |
| "" \ |
| "675.093750" \ |
| "Contents of two_floats_t: " \ |
| "" \ |
| "\[ \t\]*45.234001\[ \t\]*43.599998" \ |
| "Contents of two_floats_t: " \ |
| "" \ |
| "\[ \t\]*78.010002\[ \t\]*122.099998" \ |
| "Contents of two_floats_t: " \ |
| "" \ |
| "-1232.344971\[ \t\]*-199.210007" \ |
| ] \ |
| "" \ |
| "print print_small_structs" |
| } |
| |
| #call compute_with_small_structs(20) |
| gdb_test "print compute_with_small_structs(20)" \ |
| "\[0-9\]+ = void" |
| |
| |
| #call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, |
| # 3.14, -5678.12345, -0.11111111, 216.97065) |
| |
| if {!$skip_float_test && \ |
| ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} { |
| gdb_test_stdio "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)" \ |
| [multi_line \ |
| "Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*" \ |
| "Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*" \ |
| "Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*" \ |
| "Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*" \ |
| "Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*" \ |
| ] |
| } |
| |
| set stop_line [gdb_get_line_number "-tbreak7-"] |
| gdb_test "tbreak $stop_line" \ |
| "Temporary breakpoint .* file .*$srcfile, line $stop_line.*" \ |
| "tbreakpoint at tbreak7" |
| |
| gdb_test continue "Continuing\\..*main \\(.*\\) at.*$srcfile:$stop_line\[\t\r\n \]+$stop_line.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to tbreak7" |
| |
| set stop_line [gdb_get_line_number "-step2-"] |
| # We can't just assume that a "step" will get us into |
| # print_long_arg_list here,either. |
| gdb_test "tbreak print_long_arg_list" \ |
| "Temporary breakpoint .* file .*$srcfile, line .*" \ |
| "tbreak in print_long_arg_list after stepping into memcpy" |
| # The short match case below handles cases where a buffer |
| # overflows or something, and expect can't deal with the full |
| # line. Perhaps a more elegant solution exists... -sts 1999-08-17 |
| if {!$skip_float_test} { |
| gdb_test_multiple "continue" "step into print_long_arg_list" { |
| -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { |
| pass "step into print_long_arg_list" |
| } |
| -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { |
| pass "step into print_long_arg_list (short match)" |
| } |
| } |
| } else { |
| # If skipping float tests, don't expect anything in arg list. |
| gdb_test "continue" \ |
| "print_long_arg_list \\(.*\\).*" \ |
| "step into print_long_arg_list" |
| } |
| |
| set ws "\[\n\r\t \]+" |
| |
| #call print_small_structs(struct1, struct2, struct3, struct4, flags, |
| # flags_combo, three_char, five_char, int_char_combo, |
| # d1, d2, d3, f1, f2, f3) |
| |
| if {!$skip_float_test && \ |
| ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } { |
| |
| # On 32-bit SPARC, some of the args are passed by ref, others by |
| # value, and GDB gets confused and says "Invalid cast" because it |
| # thinks it has to cast the structure into a pointer to structure. |
| if { [test_debug_format "stabs"] } then { |
| setup_kfail "gdb/1539" "sparc-*-*" |
| } |
| |
| |
| gdb_test_stdio "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)" \ |
| [multi_line \ |
| "alpha" \ |
| "gamma" \ |
| "epsilon" \ |
| "alpha" \ |
| "gamma" \ |
| "epsilon" \ |
| "ch1: y\[ \t\]*ch2: n" \ |
| "Contents of three_char_t: " \ |
| "" \ |
| "a\[ \t\]*b\[ \t\]*c" \ |
| "Contents of five_char_t: " \ |
| "" \ |
| "l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p" \ |
| "Contents of int_char_combo_t: " \ |
| "" \ |
| "123\[ \t\]*z" \ |
| "Sum of the 4 struct values and seed : " \ |
| "" \ |
| "\[ \t\]*52" \ |
| "Contents of struct1: " \ |
| "" \ |
| "\[ \t\]*6\[ \t\]*0" \ |
| "Contents of struct2: " \ |
| "" \ |
| "\[ \t\]*10\[ \t\]*0" \ |
| "Contents of struct3: " \ |
| "" \ |
| "\[ \t\]*12\[ \t\]*0" \ |
| "Contents of one_double_t: " \ |
| "" \ |
| "10.500000" \ |
| "Contents of one_double_t: " \ |
| "" \ |
| "-3.375000" \ |
| "Contents of one_double_t: " \ |
| "" \ |
| "675.093750" \ |
| "Contents of two_floats_t: " \ |
| "" \ |
| "\[ \t\]*45.234001\[ \t\]*43.599998" \ |
| "Contents of two_floats_t: " \ |
| "" \ |
| "\[ \t\]*78.010002\[ \t\]*122.099998" \ |
| "Contents of two_floats_t: " \ |
| "" \ |
| "-1232.344971\[ \t\]*-199.210007" \ |
| ] \ |
| "" \ |
| "print print_small_structs from print_long_arg_list" |
| } |
| |
| set stop_line [gdb_get_line_number "-tbreak8-"] |
| gdb_test "tbreak $stop_line" \ |
| "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ |
| "tbreakpoint at tbreak8" |
| |
| if ![gdb_skip_stdio_test "continuing to tbreak8"] { |
| gdb_test_stdio "continue" \ |
| "Contents of two_floats_t:" \ |
| ".*main \\(\\) at.*$srcfile:$stop_line.*$stop_line.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \ |
| "continue to tbreak8" |
| } else { |
| gdb_test "continue" ".*" "" |
| } |
| |
| #step |
| set stop_line [gdb_get_line_number "-step3-"] |
| gdb_test "step" \ |
| "init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*$srcfile:$stop_line\[ \t\n\r\]+$stop_line.*bit_flags_combo->alpha = a;.*" \ |
| "step into init_bit_flags_combo" |
| |
| #call print_bit_flags_combo(*bit_flags_combo) |
| if ![gdb_skip_stdio_test "continuing at step3"] { |
| gdb_test_stdio "print print_bit_flags_combo(*bit_flags_combo)" \ |
| "alpha.*gamma.*epsilon.*ch1: y.*ch2: n" |
| } |
| |
| |
| set stop_line [gdb_get_line_number "-tbreak9-"] |
| gdb_test "tbreak $stop_line" \ |
| "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ |
| "tbreakpoint at tbreak9" |
| |
| gdb_test continue "Continuing\\..*main \\(\\) at .*$srcfile:$stop_line\[\r\n\t \]+$stop_line.*init_int_char_combo\\(int_char_combo, 13, .!.\\);.*" \ |
| "continue to tbreak9" |
| |
| #call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3) |
| |
| if {!$skip_float_test && \ |
| ![gdb_skip_stdio_test "print print_long_arg_list"] } { |
| |
| gdb_test_stdio "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" \ |
| [multi_line \ |
| "double : 22.250000" \ |
| "double : 33.375000" \ |
| "int : 0" \ |
| "int : -25" \ |
| "int : 100" \ |
| "int : 2345" \ |
| "alpha" \ |
| "gamma" \ |
| "epsilon" \ |
| "alpha" \ |
| "gamma" \ |
| "epsilon" \ |
| "ch1: y\[ \t\]*ch2: n" \ |
| "Contents of three_char_t: " \ |
| "" \ |
| "x\[ \t\]*y\[ \t\]*z" \ |
| "Contents of five_char_t: " \ |
| "" \ |
| "h\[ \t\]*e\[ \t\]*l\[ \t\]*l\[ \t\]*o" \ |
| "Contents of int_char_combo_t: " \ |
| "" \ |
| "123\[ \t\]*z" \ |
| "Sum of the 4 struct values and seed : " \ |
| "" \ |
| "\[ \t\]*52" \ |
| "Contents of struct1: " \ |
| "" \ |
| "\[ \t\]*6\[ \t\]*0" \ |
| "Contents of struct2: " \ |
| "" \ |
| "\[ \t\]*10\[ \t\]*0" \ |
| "Contents of struct3: " \ |
| "" \ |
| "\[ \t\]*12\[ \t\]*0" \ |
| "Contents of one_double_t: " \ |
| "" \ |
| "1.111110" \ |
| "Contents of one_double_t: " \ |
| "" \ |
| "-345.340000" \ |
| "Contents of one_double_t: " \ |
| "" \ |
| "546464.200000" \ |
| "Contents of two_floats_t: " \ |
| "" \ |
| "0.234000\[ \t\]*453.100006" \ |
| "Contents of two_floats_t: " \ |
| "" \ |
| "78.345001\[ \t\]*23.090000" \ |
| "Contents of two_floats_t: " \ |
| "" \ |
| "-2.345000\[ \t\]*1.000000" \ |
| ] \ |
| "" \ |
| "print print_long_arg_list" |
| } |
| |
| |
| set stop_line [gdb_get_line_number "-tbreak10-"] |
| gdb_test "tbreak $stop_line" \ |
| "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ |
| "tbreakpoint at tbreak10" |
| |
| gdb_test continue "Continuing\\..*main \\(\\) at .*$srcfile:$stop_line\[ \t\n\r\]+$stop_line.*compute_with_small_structs\\(35\\);.*" \ |
| "continue to tbreak10" |
| |
| |
| #call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4) |
| if ![gdb_skip_stdio_test "print sum_struct_print(...)"] { |
| gdb_test_stdio "print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4)" \ |
| "Sum of the 4 struct values and seed :\[ \t\n\r\]+218" |
| } |
| |
| |
| #call print_struct_rep(*struct1, *struct2, *struct3) |
| if ![gdb_skip_stdio_test "print print_struct_rep(...)"] { |
| gdb_test_stdio "print print_struct_rep(*struct1, *struct2, *struct3)" \ |
| [multi_line \ |
| "Contents of struct1: " \ |
| "" \ |
| " 22 0" \ |
| "Contents of struct2: " \ |
| "" \ |
| " 42 0" \ |
| "Contents of struct3: " \ |
| "" \ |
| " 62 0" \ |
| ] |
| } |
| |
| if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] { |
| gdb_test_stdio "print print_one_large_struct(*list1)" \ |
| " 4 1" |
| } |
| |
| set timeout $oldtimeout |
| return |
| |
