blob: 11a01ee28b59e76918a1defce5a8c1aa708dbb31 [file] [log] [blame]
Thu Dec 31 11:06:38 1992 Fred Fish (
* (BISON): Add comment that when bison is used, it
must include the "-y" option.
* c-exp.y, m2-exp.y (yyrule, yyname, yyss, yyssp, yyvs, yyvsp):
Remove defines to remap non-yacc symbols, thus backing out of
previous recent changes. Standard policy is that non-yacc parser
generators get fixed, rather than adding bug workarounds in gdb
for each new one that pops up. Expand comment to note this.
* c-exp.y, m2-exp.y (YYDEBUG): Revert back to disabled by default.
Thu Dec 31 09:03:02 1992 Stu Grossman (grossman at
* partial-stab.h (near N_BINCL): Remove redundant code in N_BINCL
case. Use code in N_SOL.
* paread.c: New file that contains all HPPA/HPUX symbol reading
* dbxread.c: Remove almost all HPPA/HPUX symbol reading code.
* (dbx_symfile_init): Use sizeof(long) instead of 4.
* (dbx_symfile_offsets): Make static.
* (pastab_build_psymtabs): New interface routine for paread to
send stabs into dbxread.
* gdb-stabs.h: Remove gobs of HPPA cruft.
Wed Dec 30 19:47:13 1992 Fred Fish (
* c-exp.y, m2-exp.y (yyrule, yyname): Remap like other yy* names
for byacc.
* ch-exp.y (yyrule, yyname): Remap like other yy* names for byacc.
* c-exp.y, m2-exp.y (yyreds, yytoks): Remap like other yy* names.
* c-exp.y, m2-exp.y (YYDEBUG): Define if MAINTENANCE_CMDS is defined
and YYDEBUG is not already defined.
* c-exp.y (strncmp): Replace throughout with STREQN, missed
them during the previous replacements.
* printcmd.c (_initialize_printcmd): Update internal documentation
for "set" command to note that the assignment syntax is language
* ch-exp.y (yyreds, yytoks): Remap like other yy* names.
* ch-exp.y (YYDEBUG): Define if MAINTENANCE_CMDS is defined
and YYDEBUG is not already defined.
single_assignment_action): New terminals and nonterminal for gdb
extensions to chill expression grammer.
* ch-exp.y (match_dollar_tokens): Lexer routine to match all
tokens that start with '$' (register names, convenience vars, etc).
* ch-exp.y (tokentab2): Add GDB_ASSIGNMENT.
* ch-exp.y (yylex): Call match_dollar_tokens.
Mon Dec 28 15:00:01 1992 Stu Grossman (grossman at
* hppah-tdep.c (skip_trampoline_code): Use new macros for
accessing minimal symbol data.
* infcmd.c (read_pc): Use #ifdef, not #if.
* symfile.c (syms_from_objfile): Add CONST to decl for targets.
* tm-hppa.h (FIX_CALL_DUMMY): Use new macros for accessing
minimal symbol data.
* hppah-tdep.c (frame_saved_pc): Use better test for outermost
frame. Use find_return_regnum to find the caller.
* (find_unwind_entry): New routine to locate stack frame info
associated with a procedure. This looks in the $UNWIND_START$
section in the SOM file.
* (find_return_regnum): New routine. Uses find_unwind_entry() to
figure out where the caller's return address is stored.
* (find_proc_framesize): New routine. Uses find_unwind_entry()
to figure out the frame size for a procedure.
* (saved_pc_after_call): New routine, moved from tm-hppa.h.
* (init_extra_frame_info): New routine. Corrects PC and FP for
outermost frame if necessary.
* (frame_chain): New routine, moved from tm-hppa.h.
* (skip_trampoline_code): Handle computed function calls (ie:
calls from $$dyncall).
* (unwind_command): Temporary support function to allow user
to control/observe aspects of the unwind (stack frame) info.
* infcmd.c (read_pc): (Temporary), put a hack in to see if the PC
was in a system call, if so, then read the PC from r31.
with extra arg for skip_trampoline_code().
* (INIT_EXTRA_FRAME_INFO): Define to point at subr (see above).
* (FRAME_CHAIN, FRAME_CHAIN_VALID): Turn into real subroutines.
* tm-hppa.h (SAVED_PC_AFTER_CALL): Turn into real subroutine.
Sun Dec 27 17:34:15 1992 Fred Fish (
* dbxread.c (dbx_symfile_init, elfstab_build_psymtabs):
Call new bfd_get_size() and verify that string table is no larger
than the file that is supposed to contain it.
* symfile.c (syms_from_objfile): Only complain about configured
NAMES_HAVE_UNDERSCORE differences between gdb and bfd if the
current target is the default BFD target.
Sat Dec 26 20:51:41 1992 Fred Fish (
* solib.c (BKPT_AT_MAIN): Change to BKPT_AT_SYMBOL.
* solib.c (bkpt_names): New array of symbol names to try to
use for the "mapping complete" breakpoint. Configurable
define SOLIB_BKPT_NAME is first one to try.
* solib.c (find_solib): Test debug_base for nonzero rather
than just greater than zero.
* solib.c (enable_break): Use bkpt_names to look up address
at which to set "mapping complete" breakpoint.
Tue Dec 22 20:33:38 1992 Fred Fish (
* defs.h (STRCMP, STREQ, STREQN): New macros.
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
Mon Dec 21 22:24:33 1992 Fred Fish (
* valprint.c (val_print): Reorganize comment and add note
about dependency on target byte ordering.
* ch-exp.y (value_array_slice): Fix typo.
* ch-valprint.c (chill_val_print): Remove C'ism that arrays of
byte sized ints are assumed to be char strings and printed with
string syntax. In chill, arrays of chars and arrays of
bytes/ubytes are distinquishable, and printed appropriately.
Mon Dec 21 18:02:35 1992 Stu Grossman (grossman at
* tm-hppah.h: #define NEED_TEXT_START_END for target memory
read/write routines for HPUX.
* hppa-pinsn.c (print_insn): Improve handling of be and ble
branch targets to compute target address using const from previous
instruction if necessary.
* Add `Q' operator to print out bit position field various
* hppah-nat.c: #include sys/param.h, and sys/user.h. General
cleanups, use new code from Utah.
* (store_inferior_registers): Update to new code from Utah.
* (initialize_kernel_u_addr): Re-enable decl of struct user u.
* (fetch_register): Clear out priv level when reading PCs.
* hppah-tdep.c: Get rid of gobs of KERNELDEBUG stuff.
* Remove decl of errno, #include wait.h and target.h.
* (frame_saved_pc): Check `flags' pseudo-register to see if we
were inside of a kernel call. If so, then PC is in a different
register. Also, mask out bottom two bits of all PCs so as not to
confuse higher level code.
* (push_dummy_frame): Create from #define in tm-hppa.h.
* (find_dummy_frame_regs): Update from Utah.
* (hp_pop_frame): Create from #define in tm-hppa.h.
* (hp_restore_pc_queue): New, from Utah.
* (hp_push_arguments): Big fixes from Utah.
* (pa_do_registers_info, pa_print_registers): Only print out fp
regs upon request.
* (skip_trampoline_code): New routine to deal with stubs that
live in nowhereland between callers and callees.
* i860-tdep.c: Remove decl of attach_flag.
* infrun.c (wait_for_inferior): Add new macro
INSTRUCTION_NULLIFIED, which can tell if the instruction pointed
at by PC will be nullified. If so, then step the target once more
so as to avoid confusing the user.
* (just before step_over_function:): Use stop_func_start, not
stop_pc when checking for the existance of line number info.
stop_func_start will reflect the proper address of the target
routine, not of the stub that we may be traversing to get there.
to deal with the stubs that PA compilers sometimes stick between
callers and callees. Also, define FLAGS_REGNUM for access to the
`flags' pseudo-reg.
memcpy, not bcopy.
* (CANNOT_STORE_REGISTER): New from Utah. Says that we can't
write gr0, PC regs, and PSW!
* (FRAME_FIND_SAVED_REGS): Bug fixes from Utah.
* (PUSH_DUMMY_FRAME, POP_FRAME): Make into real routines in
* (CALL_DUMMY, FIX_CALL_DUMMY): Fixes from Utah.
* Define struct unwind_table_entry.
* valops.c (call_function_by_hand): Add another arg to
FIX_CALL_DUMMY (under #ifdef GDB_TARGET_IS_HPPA). Why is this
Mon Dec 21 02:17:57 1992 david d `zoo' zuhn (zoo at
* remote-vx.c: remove include of "symfile.h", replace it with "complaints.h"
Fri Dec 18 10:32:25 1992 Fred Fish (
* (VERSION): Bump to 4.7.4.
* (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c,
m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c.
* (HFILES): Add valprint.h.
* (OBS): Add typeprint.o, c-typeprint.o,
m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o.
* typeprint.c, typeprint.h: New files for language independent
type printing functions.
* c-typeprint.c, m2-typeprint.c: New files for language dependent
type printing functions and definitions.
* valprint.h: New include file for language independent value
printing definitions.
* c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language
dependent value printing functions.
* c-exp.y (production ptype): Add range_type variable and use new
create_range_type function.
* c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab),
infcmd.c (path_var_name), language.c (unk_op_print_tab),
m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent
"const static" to ANSI-conformant "static const".
* c-exp.y (c_create_fundamental_type): Remove unused nbytes.
* c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type,
and c_val_print.
* c-lang.h (c_print_type, c_val_print): Add prototypes.
* coffread.c (decode_type): Add range_type variable and call to
new create_range_type function.
* complaints.c (complain): Remove unused val variable.
* complaints.c (_initialize_complaints): Make it void.
* convex-tdep.c (value_of_trapped_internalvar): Add range_type
variable and call new create_range_type function.
* defs.h (enum val_prettyprint): Move enum from value.h to here
so we can avoid having to include value.h just for prototypes that
need the enum (thanks ANSI).
* dwarfread.c (struct_type): Local anonymous_size variable is
only used if !BITS_BIG_ENDIAN.
* dwarfread.c (decode_subscript_data_item): Add rangetype
variable and call new create_range_type function.
* elfread.c (elf_symfile_read): Remove unused dbx and text_sect
* eval.c (evaluate_subexp): Remove unused local variable name
and the statement with no side effects that initializes it.
* expprint.c (print_subexp): Change local_printstr to
* gdbtypes.c (create_range_type): New function that creates
a range type using code fragments from object file readers as
an example of what has to be initialized.
* gdbtypes.c (create_array_type): Removed index_type, low_bound,
and high_bound parameters, replaced with a single range_type
parameter. Change function body to use passed in range_type
rather than handcrafting one.
* gdbtypes.h (create_range_type): Add prototype.
* gdbtypes.h (create_array_type): Change prototype parameters.
* infrun.c (normal_stop): Remove unused local variables tem and c.
* infrun.c (hook_stop_stub): Return 0 rather than random value.
* language.c (unk_lang_print_type, unk_lang_val_print): Add
stub functions that call error if called.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Add initializers unk_lang_print_type and
* language.h (struct language_defn): Reformat for larger
comments, add la_print_type and la_val_print members. Add
LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar
to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING.
* m2-lang.c (m2_create_fundamental_type): Remove unused local
variable nbytes.
* m2-lang.c (m2_language_defn): Add initializers m2_print_type
and m2_val_print.
* m2-lang.h (m2_print_type, m2_val_print): Add prototypes.
* main.c (execute_command): Remove unused local variable cmdlines.
* main.c (echo_command), stabsread.c (read_type), printcmd.c
(clear_displays), symmisc.c (block_depth), values.c
Make testing of truth value of assignment result explicit.
* mipsread.c (upgrade_type): Update FIXME to include future use
of create_range_type.
* printcmd.c (ptype_command, ptype_eval, whatis_command,
whatis_exp, maintenance_print_type): Move prototypes and functions
to new typeprint.c.
* printcmd.c (_initialize_printcmd): Move add_com calls for
ptype_command and whatis_command to new typeprint.c.
* ser-bsd.c (serial_open): Remove unused variable sgttyb.
* source.c (find_source_lines): Local variable c only used
when LSEEK_NOT_LINEAR is defined.
* stabsread.c (read_array_type): Use new create_range_type
* stabsread.c (read_range_type): Add new index_type variable and
call new create_range_type function rather than handcrafting
range types.
* symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE.
* symtab.c (typedef_print usages): Use c_typedef_print, renamed.
* symtab.c (type_print_base usages): Use c_type_print_base.
* symtab.c (type_print_varspec_prefix usages): Use
* symtab.c (type_print_method_args usages): Use
* valprint.c: Completely ripped apart and the fragments used
to create c-valprint.c, cp-valprint.c, m2-valprint.c, and
valprint.h. Remaining stuff is language independent.
* value.h (struct fn_field): Forward declare for prototypes.
* value.h (type_print_1): Remove prototype.
* value.h (enum val_prettyprint): Moved to defs.h.
* value.h (typedef_print): Prototype renamed to c_typedef_print.
* value.h (baseclass_offset): Add prototype.
* (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c.
* (OBS): Add ch-typeprint.o, ch-valprint.o.
* ch-typeprint.c: New file for language dependent type printing.
* ch-valprint.c: New file for language dependent value printing.
* ch-exp.y (parse_number): Remove prototype and stub function.
* ch-exp.y (decode_integer_literal): Removed unused digits and
temp variables.
* ch-exp.y (convert_float): Completely ifdef out for now.
* ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5),
ch-lang.c (chill_op_print_tab):
Change from ANSI-obsolescent "const static" to ANSI-conformant
"static const".
* ch-exp.y (yylex): Add unhandled storage class enumeration
literals to switch statement for completeness.
* ch-lang.c (chill_create_fundamental_types): Remove unused
nbytes variable. Change dummy type to 2 bytes to match int.
Handle FT_VOID types gratuituously added to chill DWARF by
compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR
type rather than a one byte TYPE_CODE_INT type.
* ch-lang.c (chill_language_defn): Add chill_print_type and
* ch-lang.h (chill_print_type, chill_val_print): Add prototypes.
Thu Dec 17 00:44:57 1992 John Gilmore (
Eliminate uses of NAMES_HAVE_UNDERSCORE, using
bfd_get_symbol_leading_char instead.
* coffread.c (EXTERNAL_NAME): New macro for removing possible
leading character from names.
(read_coff_symtab): Use BFD's FILE *, don't open a second one.
(process_coff_symbol, coff_read_struct_type, coff_read_enum_type):
* kdb-start.c (main): Remove NAMES_HAVE_UNDERSCORE.
* minsyms.c (install_minimal_symbols): Replace NAMES_HAVE_UNDERSCORE.
Remove SOME_NAMES_HAVE_DOT support (apparently unused).
* partial-stab.h: Replace NAMES_HAVE_UNDERSCORE.
* solib.c: Replace NAMES_HAVE_UNDERSCORE.
* stabsread.h: Remove NAMES_HAVE_UNDERSCORE and HASH_OFFSET.
* symfile.c (syms_from_objfile): Insert debugging check to test
NAMES_HAVE_UNDERSCORE setting against the BFD support.
* xm-rs6000.h (MEM_FNS_DECLARED): Update comments.
* coffread.c (read_coff_symtab, C_BLOCK): Use complain() rather
than error() for .bb/.eb. Bug found by Eddie Fung, <>.
Tue Dec 15 10:05:56 1992 Ian Lance Taylor (
* coffread.c (decode_type): catch negative tagndx fields generated
by SCO 3.2v4 cc.
* exec.c: comment out string following #endif.
* (i[34]86-*-sco3.2v4*): use host i386sco4.
* xm-i386sco.h: include <sys/types.h> and <sys/dir.h>, required by
* config/ new file; like, but don't require
gcc, and define const to empty to avoid SCO 3.2v4 cc bug.
Tue Dec 15 04:14:24 1992 Fred Fish (
* complaints.c: New file, code moved from utils.c.
* complaints.c (complain): Made into a varargs function.
* complaints.h: New file, code moved from symfile.h.
* (SFILES_MAINDIR): Add complaints.c.
* (HFILES): Add complaints.h.
* (OBS): Add complaints.o.
* symfile.c (complaint_root, stop_whining, complaint_series,
complain, clear_complaints, add_show_from_set for stop_whining):
Moved to complaints.c.
* symfile.h (struct complaint, complaint_root decl, complain
prototype, clear_complaints prototype): Moved to complaints.h.
* buildsym.c, coffread.c, dbxread.c, dwarfread.c, elfread.c,
gdbtypes.c, mipsread.c, stbsread.c, symfile.c: Include
complaints.h. Remove casts from arguments to complain(),
which is now a varargs function, and remove unnecessary
placeholder zero args.
* defs.h (begin_line): Add prototype.
* defs.h (vprintf_filtered): Add prototype.
* dwarfread.c (varargs.h): Remove, no longer needed.
* dwarfread.c (dwarfwarn): Remove prototype and function.
* dwarfread.c (complaints): Define a bunch of complaints.
* dwarfread.c (SQUAWK): Remove macro defs, convert all
usages to standard complain() calls.
* utils.c (begin_line): New function that ensures that
whatever gets filter-printed next starts on its own line.
* utils.c (vprintf_filtered): New func, like vfprintf_filtered,
but to stdout (calls vfprintf_filtered internally).
Tue Dec 15 02:01:00 1992 John Gilmore (
* remote.c: Avoid printf_filtered line limit. Suggested by
Robert R. Henry, <>.
* infcmd.c (environment_info): Ditto, for Don Allen <>.
* main.c (main): Accept --silent as well as --quiet. Change +help
to --help. Suggested by Karl Berry, <>.
Mon Dec 14 23:28:15 1992 John Gilmore (
* tm-nindy960.h, remote-nindy.c: Lint.
Mon Dec 14 18:48:52 1992 Fred Fish (
* gdbtypes.c (create_array_type): Complete rewrite. Now requires
a optional type to decorate as an array type, the type of the
index, and the bounds of the array. Records this additional info
in the array type for use with languages with nonzero array
* gdbtypes.h (enum type_code): Update comment for TYPE_CODE_ARRAY
to note that arrays may have bounds.
* gdbtypes.h (create_array_type): Update prototype.
* c-exp.y (ptype production): Adjust for new create_array_type
calling conventions.
* coffread.c (decode_type): Call create_array_type rather than
handcrafting array types.
* convex-tdep.c (value_type): Remove, now use create_array_type.
* convex-tdep.c (value_of_trapped_internalvar): Convert calls to
vector_type into calls to create_array_type.
* dwarfread.c (decode_subscr_data): Name changed to
decode_subscript_data_item throughout.
* dwarfread.c (decode_subscript_data_item): Rewrite to use
create_array_type. Now records index type and range as well.
* dwarfread.c (dwarf_read_array_type): Rewrite as part of
change to use create_array_type.
* dwarfread.c (read_subroutine_type): Test existing user defined
types before decorating them, to ensure they are blank, and
complain about it if they are not.
* dwarfread.c (decode_fund_type): For unrecognized types, always
return some valid type (type integer). If the unrecognized type
cannot be an implementation defined type, complain as well.
* m88k-tdep.c (pushed_size): Update comment for TYPE_CODE_ARRAY.
* m88k-tdep.c (store_param): Update comment for TYPE_CODE_ARRAY.
* mipsread.c (upgrade_type): Add FIXME comment that code to
handcraft arrays should be replaced with call to create_array_type.
* stabsread.c (read_array_type): Replace code to handcraft
array types with call to create_array_type.
* valprint.c (type_print_varspec_prefix): Minor formatting
change, join lines that don't need to be split.
Mon Dec 14 17:18:42 1992 Stu Grossman (grossman at
* convex-xdep.c, hppab-nat.c, infptrace.c: Remove
decl for attach_flag, it now lives in inferior.h.
* hppa-pinsn.c: Reformat opcode tables. Add function prototypes.
Make most functions static.
* hppah-nat.c: General cleanups, remove BSD specific code (since
that all lives in hppab-nat.c).
* hppah-tdep.c (frame_chain_valid), tm-hppa.h (FRAME_CHAIN):
Change sense of test against inside_entry_file(). This fix is
from U. of Utah.
* tm-hppa.h (PUSH_DUMMY_FRAME, POP_FRAME): Use char * for 2nd arg
to read/write_register_bytes().
* gdbtypes.h: Remove const from decl for cplus_struct_default to
work around PA-GAS assembler bug. Also, add trailing */ to some
* gdbtypes.c: Remove const from decl for cplus_struct_default.
Same reason as above.
Wed Dec 9 19:53:25 1992 John Gilmore (
* mipsread.c (parse_symbol): When checking whether a structured
type is an enum, check qualifiers of its first member, as well as
the base type of the member. Bug found and fixed by John M.
Farrell, <>.
* vx-share/{reg.h,xdr_regs.h,xdr_regs.c}: Remove, unused.
* remote-vx.c: Don't include vx-share/reg.h.
* vx-share/ptrace.h: Reproduce from scratch.
* config/{vxworks68,vxworks960}: Don't include xdr_regs.o.
* Remove references to removed files, and to removed
29k-share directories.
Tue Dec 8 13:30:58 1992 Fred Fish (
* c-lang.c (_initialize_c_language): Name changed from
* m2-lang.c (_initialize_m2_language): Name changed from
* m2-lang.c (_initialize_m2_language): Change malloc to xmalloc since
it is no longer inside m2-exp.y, where it was remapped by Makefile.
* c-exp.y, m2-exp.y: Migrate code that has nothing to do with
expression parsing into c-lang.c and m2-lang.c respectively.
* c-lang.c, m2-lang.c: New files, code migrated from c-exp.y and
m2-exp.y respectively.
* c-lang.h, m2-lang.h: New files, internal interfaces between c-*
and m2-* files respectively.
* (SFILES_MAINDIR): Add c-lang.c, m2-lang.c.
* (HFILES): Add c-lang.h, m2-lang.h.
* (OBS): Add c-lang.o, m2-lang.o.
* expression.h (struct block): Forward declaration for prototypes.
* language.h (struct objfile): Forward declaration for prototypes.
* (SFILES_MAINDIR): Add ch-lang.c.
* (HFILES): Add ch-lang.h.
* (OBS): Add ch-lang.o.
* ch-exp.y: Migrate code that has nothing to do with expression
parsing into ch-lang.c.
* ch-lang.c: New file, code migrated from c-exp.y.
* ch-lang.h: New file, internal interface between ch-* files.
* ch-lang.c (_initialize_chill_language): Name changed from
Changes for Amiga Unix from
* config/ (NAT_FILE): Add, set to nm-sysv4.h.
* config/ (NATDEPFILES): Add.
* config/ (XDEPFILES): Move procfs.o and fork-child.o
* dwarfread.c (decode_subscr_data): Remove spurious test that
accepted only integer subscript types. We don't do anything
with the type at the moment anyway.
Fri Dec 4 06:56:56 1992 Fred Fish (
* ch-exp.y (match_character_literal): Fix case where no
match at all is found.
* ch-exp.y (chill_create_fundamental_type): Chill uses fixed
width types. For example, "INT" is always 2 bytes regardless
of the values of any TARGET_*_BIT macros. So use explicit
numeric sizes for the types.
Thu Dec 3 12:00:06 1992 Fred Fish (
* c-exp.y (c_create_fundamental_type): New function to create
language specific fundamental types for C.
* m2-exp.y (m2_create_fundamental_type): New function to create
language specific fundamental types for Modula 2.
* c-exp.y (c_language_defn, cplus_language_defn): Add
c_create_fundamental_type to language struct initializers.
* m2-exp.y (m2_language_defn): Add m2_create_fundamental_type
to language struct initializers.
* dwarfread.c (expression.h, language.h): Include.
* dwarfread.c (ftypes): New array to hold fundamental types
for current compilation unit.
* dwarfread.c (cu_language_defn): New pointer to language
struct for language of current compilation unit.
* dwarfread.c (dwarf_fundamental_type): New function to
create/lookup fundamental types.
* dwarfread.c (set_cu_language): Initialize cu_language_defn.
* dwarfread.c (throughout): Replace lookup_fundamental_type
with dwarf_fundamental_type.
* dwarfread.c (read_file_scope): Zero out ftypes for each new
compilation unit (may be different language or different objfile).
* gdbtypes.c (lookup_fundamental_type): Move actual type
creations into language specific fundamental type creation
functions and call via create_fundamental_type. Add comment
about this function being obsolescent.
* gdbtypes.h (FT_BYTE, FT_UNSIGNED_BYTE): New types, true byte
sized signed and unsigned integers.
* gdbtypes.h (FT_NUM_MEMBERS): Increment, new types added.
* language.c (language_def): New function to lookup a language
struct given it's enumeration.
* language.h (struct language_defn): Add la_fund_type, a pointer
to a function that creates fundamental types for this language.
* language.h (create_fundamental_type): New macro to create
fundamental types based on the current language.
* language.h (language_def): Add prototype.
* language.c (unk_lang_create_fundamental_type): New function
for initializing language structs, calls error if called.
* language.c (unk_language_defn, auto_language_defn,
local_language_defn): Use unk_lang_create_fundamental_type.
ch-exp.y (chill_create_fundamental_type): New function.
ch-exp.y (chill_language_defn): Add chill_create_fundamental_type.
ch-exp.y (_initialize_chill_exp): BOOL types are only one byte.
Tue Dec 1 17:07:31 1992 Fred Fish (
* dwarfread.c (CHILL_PRODUCER): Add producer string for
GNU chill.
* dwarfread.c (handle_producer): Test CHILL_PRODUCER as well
Mon Nov 30 18:46:58 1992 Stu Grossman (grossman at
* remote-udi.c (udi_wait): Don't stop if TIP says that remote is
still running.
Mon Nov 30 12:00:25 1992 Fred Fish (
* tm-sun4sol2.h: Add CPLUS_MARKER. Solaris 2.0 requires '.'
rather than '$'. This particular piece of braindamage is
spreading like ooze. It's now infected libiberty, deja-gnu,
gdb, and gcc.
* values.c (baseclass_addr): Use CPLUS_MARKER rather than
hardwired '$' character.
Sun Nov 29 15:22:42 1992 Fred Fish (
(Changes to break incredibly ugly, unmaintainable 750 line
read_struct_type function up into managable pieces.)
* (VERSION): Bump to 4.7.3.
* stabsread.c (struct field_info): Local struct definition.
* stabsread.c (read_member_functions, read_struct_fields,
read_baseclasses, read_tilde_fields, attach_fn_fields_to_type,
attach_fields_to_type, read_cpp_abbrev): Prototypes and new
functions from fragmented read_struct_type.
* stabsread.c (stabs_general_complaint): Catchall complaint.
* stabsread.c (STABS_CONTINUE): Macro'ize cretinous stabs
symbol name continuation code. Use macro throughout.
* stabsread.c (various places): Replace add-one-to-pointer
with pointer increment.
* stabsread.c (read_type): Retain function local copy of type
descriptor. Rearrange code calling read_struct_type() to match
new conventions.
* stabsread.c (define_symbol): For the sake of dbx, gcc emits
a single blank as the name of nameless enumerations. Recognize
this special case and set nameless flag.
terminal tokens.
* ch-exp.y (access_name): New non-terminal token and
* ch-exp.y (general_procedure_name): Now a terminal token.
* ch-exp.y (location): Expand production.
* ch-exp.y (match_simple_name_string): New function.
* ch-exp.y (yylex): Call match_simple_name_string and return
Wed Nov 25 07:17:13 1992 Fred Fish (
* munch: Backslash escape vertical bar characters inside
grep patterns since they have special meaning for some greps.
* parse.c (write_exp_string): Complete rewrite to store string
contants as a leading explicit length, followed by the string data,
followed by a trailing explicit length.
* eval.c (evaluate_subexp), expprint.c (print_subexp),
parse.c (length_of_subexp), parse.c (prefixify_subexp):
Use recorded explicit length of strings in expression elements,
rather than strlen. Adjust code to skip over strings stored in
expression elements, and code to access strings, to account for
new leading explicit size expression element.
* parse.c (length_of_subexp): Test for minimum endpos of 1, not
0, to avoid negative expression element indices.
* valops.c (search_struct_method): Minor whitespace change.
Mon Nov 23 11:14:15 1992 Fred Fish (
* c-exp.y (yylex): Add tempbuf, tempbufindex, and tempbufsize,
which together maintain a dynamically expandable static buffer
for the lexer to use when translating C strings to their internal
form (other future uses possible). Fix parsing of C style strings
to do the normal C style input conversions of escaped character
* valops.c (value_string): Remove translation of escaped
character sequences, now done in C expression parser.
* language.h (PRINT_LITERAL_FORM): New macro that takes character
and decides if it should be printed in literal form or some other
form, based on it's ASCII value and setting of sevenbit_strings.
* {c-exp.y, m2-exp.y} (emit_char): Use new PRINT_LITERAL_FORM
macro, change indentation style.
* ch-exp.y (chill_printchar): Use new PRINT_LITERAL_FORM macro.
* ch-exp.y (chill_printstr): First cut at real function instead
of error stub.
Sun Nov 22 16:21:41 1992 david d `zoo' zuhn (zoo at
* nindy-share/stop.h: fixed bogus comment-end in copyright message
* i960-pinsn.c: fixed two calls of fputs_filtered that had 3 arguments
Fri Nov 20 21:35:57 1992 Fred Fish (
* defs.h (sevenbit_strings): Add declaration.
* defs.h (printchar): Replace with gdb_printchar.
* language.h (language_defn): Add new function pointers
la_printchar and la_printstr, to do language dependent
printing of characters and strings.
* language.h (local_printchar, local_printstr): New macros
to call language dependent functions pointed to by la_printchar
and la_printstr respectively.
* c-exp.y (emit_char, c_printchar, c_printstr): New language
dependent functions for printing characters and strings.
* c-exp.y (c_language_defn, cplus_language_defn): Add
c_printchar and c_printstr.
* command.c (do_setshow_command): Rename printchar use to
* expprint.c (print_subexp): Replace C style string output
with call to local_printstr.
* language.c (unk_lang_printchar, unk_lang_printstr):
New stubs, currently errors.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Add unk_lang_printchar and
* m2-exp.y (emit_char, m2_printchar, m2_printstr): New
language dependent functions to print characters and strings.
* m2-exp.y (m2_language_defn): Add m2_printchar and m2_printstr.
* utils.c (printchar): Renamed to gdb_printchar.
* valprint.c (print_string): Remove prototype, function moved
to c-exp.y, where it becomes c_printstr.
* valprint.c (print_max): Made global for reference from the
language dependent printing routines in *-exp.y.
* valprint.c (repeat_count_threshold): New variable with function
of old REPEAT_COUNT_THREHOLD define, but now settable by user.
Change all references to old macro to references to new variable.
* valprint.c (value_print, val_print): Replace calls to
print_string with calls to local_printstr.
* valprint.c (val_print): Replace C style character printing
with call to local_printchar.
* valprint.c (val_print): Add case for TYPE_CODE_CHAR.
* valprint.c (_initialize_valprint): Add add_show_from_set
call for setting up repeat_count_threshold as print variable.
* ch-exp.y (decode_integer_value): New function.
* ch-exp.y (decode_integer_literal): Use decode_integer_value.
* ch-exp.y (chill_printchar, chill_printstr): New language
dependent functions for printing characters and strings.
* ch-exp.y (chill_language_defn): Add chill_printchar and
Thu Nov 19 21:22:21 1992 John Gilmore (
* main.c (main): Print GDB version number in gdb -help; doc pid arg.
Suggested by Marty Leisner, <>.
(print_gdb_version): New arg is stdout or stderr. Callers changed.
Wed Nov 18 15:05:45 1992 Ian Lance Taylor (
* remote-vx.c (vx_kill): just warn if we can't contact the board,
and assume the process has been killed.
Wed Nov 18 14:39:57 1992 Stu Grossman (grossman at
* remote-udi.c (udi_open): Reset vars so that user can re-run
programs without leaving GDB.
* (many routines): Slightly improve error handling.
* (download): Zero out BSS by longs instead of bytes to avoid
timeouts in real hardware.
* 29k-share/udi/udip2soc.c (UDIDisconnect, UDIKill): Indicate
that connection is no longer in use after shutdown() of socket.
This keeps GDB from dying of a SIGPIPE when you issue multiple
`target udi' commands.
Wed Nov 18 14:27:47 1992 Fred Fish (
* language.h (language_format_info): New structure to bundle
local formatting information.
* language.h (language_defn): Replace individual format info
with language_format_info structs.
* language.h (local_*_format, local_*_format_prefix,
local_*_format_specifier, local_*_format_suffix): New macros
for binary/octal/decimal/hex formats to access info elements.
* c-exp.y (c_language_defn): Update for new format handling.
* m2-exp.y (m2_language_defn): Update for new format handling.
* dbxread.c (language.h): Include for partial-stab.h use.
* mipsread.c (expression.h, language.h): Include for
partial-stab.h use.
* defs.h (local_hex_format, local_hex_format_custom,
local_hex_string, local_hex_string_custom): Move to language.h.
* language.c (local_hex_format_custom, local_hex_string,
local_hex_string_custom, local_octal_format_custom): Use new
format handling.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Update for new format handling.
* printcmd.c (print_scalar_formatted): Use new macros
to access decimal and binary format info for printing.
* c-exp.y (chill_language_defn): Update for new format handling.
* ch-exp.y (CHARACTER_LITERAL): Add support to yylex.
* ch-exp.y (decode_integer_literal): Add function
* ch-exp.y (match_integer_literal): Use decode_integer_literal.
* ch-exp.y (builtin_type_chill_char): Add definition.
* gdbtypes.h (builtin_type_chill_char): Add declaration.
Tue Nov 17 11:17:06 1992 Ian Lance Taylor (
* tm-rs6000.h (BELIEVE_PCC_PROMOTION): Define, since AIX cc gets
it right.
(aix_framedata): added nosavedpc field.
(SAVED_PC_AFTER_CALL): Don't try to optimize; just call
(FRAMELESS_FUNCTION_INVOCATION): Pass second argument of 0.
* rs6000-tdep.c (skip_prologue): Handle gcc generated stfd
instructions as function_frame_info does. Expand special case of
st r31,-4(r1) to be st r31,NUM(r1), since gcc can generate offsets
other than -4.
(pop_frame): Add 4 rather than sizeof (int) to avoid host
(function_frame_info): Set frameless if the function has no frame,
and set nosavedpc if the PC was not saved. Handle gcc generated
stfd 31,-4(31); st 31, -12(31) correctly.
(frameless_function_invocation): New second argument pcsaved; if 0
return whether the function has a frame, if 1 return whether the
function saved PC.
(frame_initial_stack_address): Correct typo: cache registers for
callee_fi, not for fi, (avoids reading garbage memory locations).
Mon Nov 16 15:58:07 1992 Stu Grossman (grossman at
* infrun.c (wait_for_inferior (just before step_over_function
label)): Change test for stepping into subroutine to check for the
presence of line number info. This makes stuff compiled with -g1
cause GDB to not lose control when stepping.
* symtab.c (find_pc_line): Improve code per gnu's suggestions.
Improve comments as well.
Sun Nov 15 09:22:09 1992 Fred Fish (
* (VERSION): Bump to 4.7.2
* symtab.c (find_pc_symtab): Fix return of random value
to caller.
* (, Add dependency on
Makefile since it contains sed patterns used in generation.
Add sed pattern to also delete #include of any malloc.h.
* c-exp.y, expr.c, expression.h, language.c, m2-exp.y,
parser-defs.h, valarith.c, valops.c, value.h: Remap macros and
function names to conform to K&R terminology with respect to
logical and bitwise operators:
value_zerop() => value_logical_not()
value_lognot() => value_complement()
* c-exp.y (c_op_print_tab): Add explicit empty terminator.
* m2-exp.y (m2_op_print_tab): Add explicit empty terminator.
* i387-tdep.c (sys/dir.h): Remove, appears to be unnecessary
and is nonexistant in some SVR4 based systems.
* language.c (DEFAULT_ALLOCSIZE): Change from 3 => 4.
* m2-exp.y (number_sign, modblock): Make static, #ifdef out
unused modblock.
* m2-exp.y (ANDAND): Rename to LOGICAL_AND.
* source.c (source_info): Fix minor nits, print "1 line" rather
than "1 lines", and "language is <lang>".
* valarith.c (value_binop): Handle TYPE_CODE_BOOL as well
* valprint.c (val_print): Print TYPE_CODE_BOOL type values as
"TRUE" or "FALSE".
* values.c (value_from_longest): Handle TYPE_CODE_BOOL.
* ch-exp.y: New expression parser, for GNU-Chill.
* defs.h (enum language): Add language_chill.
* dwarfread.c (set_cu_language): Add LANG_CHILL case and make
LANG_MODULA2 a recognized language.
* gdbtypes.h (enum_typecode): Note TYPE_CODE_BOOL used for
Chill as well as Modula-2.
* gdbtypes.y (builtin_type_chill_bool, builtin_type_chill_long,
builtin_type_chill_ulong, builtin_type_chill_real): Add.
* language.c (set_language_command): Add chill.
* language.c (binop_result_type, integral_type, character_type,
boolean_type, structured_type, value_true, binop_type_check):
Add language_chill cases.
* language.h (_LANG_chill): Define.
* symfile.c (deduce_language_from_filename): Recognize the
filename extensions ".chill", ".c186", and ".c286" for Chill.
* valprint.c (typedef_print): Add case for language_chill.
* (SFILES_MAINDIR): Add ch-exp.y.
* (YYFILES): Add
* (YYOBJ): Add
* (saber_gdb): Add unload of ch-exp.y and load
* (distclean): Add target
* (realclean): Add rm of
* (, New targets.
* eval.c (evaluate_subexp): Add OP_BOOL case.
* expprint.c (print_subexp): Add OP_BOOL case.
Fri Nov 13 20:36:28 1992 John Gilmore (
* infcmd.c (set_environment_command): Avoid skipping first
char of env value if an '=' appears in it. Bug report and fix
by Mark Jungerman, <>.
Fri Nov 13 20:24:10 1992 Stu Grossman (grossman at
* infcmd.c (step_over_calls): Improve comments.
* symtab.c (find_pc_psymtab): Clean up a bit.
* (find_pc_symtab): Fix comments, clean up code.
* (find_pc_line): General cleanups, efficiency improvements.
Also, don't return garbage when some line info exists, but there
was no good match.
Thu Nov 5 23:04:38 1992 Rob Ryan (
* xcoffexec.c (vmap_symtab): fixed a bug where if a object has no
member, and the stat pointer passed to vmap_symtab was NULL, the
wrong vmap entries would be modified. Fixes behavior where
attempting to load symbols for a module with no member would mess
up already read in symbols.
Wed Nov 11 17:09:17 1992 Stu Grossman (grossman at
* Remove dependancies for 29k-share/dfe/yank.o and
* config/ Remove yank.o and mini2udi.o.
* alldeps.mak, depend: Update to deal with removal of
aforementioned files.
* remote-udi.c: Major cleanups. Clean up udi_open and drop
requirement for useless 'program' argument. Clean up
udi_create_inferior, and udi_load to call common download()
routine. Create download routine to load remote hosts directly
(with the help of BFD) so that we don't need yank.c and
Fix udi_detach to call UDIDisconnect with
the right arguments. Clean up udi_resume, don't assign tip_error
twice. Clean up udi_wait, straighten out status codes. Make
udi_kill really work.
Fri Nov 6 10:26:01 1992 Steve Chamberlain (
* c-exp.y: separated host/target idea of integer type size,
removed redundant parse rules. (YYSTYPE): added typed_val, removed
UINT and CHAR rules. (parse_number): work out the targetwise type
of a number based upon it's size and qualifiers. (yylex): chars
are now treated the same way as ints.
* source.c (indentify_source_line): don't core dump if wanted
line is larger than number of lines in source. (can happen when
coff gets confused about #included source).
Fri Nov 6 03:00:39 1992 John Gilmore (
Fix problems noticed by Allan Steel, <>,
when debugging a program with 100 shared libraries.
* solib.c (solib_map_sections): Always close the BFD we open.
Free all malloc'd storage we allocate, too, including error cases.
(struct so_list): Remove unused so_bfd member.
(clear_solib): Don't bother closing so_bfd.
* symfile.c (symfile_bfd_open): Mark newly opened BFD as
cacheable. `So many symbol files, so little file descriptors.'
Fri Nov 6 00:14:38 1992 John Gilmore (
* m68k-stub.c: Remove ansidecl.h and the few uses of it.
Stubs should stand alone as much as possible.
* source.c (show_directories): Avoid printf_filtered length prob
pointed out by Jonathan Stone.
* i960-pinsn.c (MEM_MAX, MEM_SIZ): Set upper limit properly to
avoid accesses beyond end of table. Fix by Lee W. Cooprider,
Thu Nov 5 17:33:08 1992 Fred Fish (
* {ser-bsd.c, ser-termios.c} (serial_close): Pass address of
struct, not struct itself.
* serial.h (serial_restore): Fix prototype, takes pointer not
Thu Nov 5 17:12:42 1992 Stu Grossman (grossman at
* (depend): Add nm.h to the list of things to fixup.
* depend: Redo, to fixup nm.h problems with *-tab.c files.
Thu Nov 5 00:19:51 1992 John Gilmore (
* i386-stub.c: Remove ansidecl.h and the few uses of it.
Stubs should stand alone as much as possible.
* README: Add remote-es1800.c and remote-st2000.c to table.
* go32-nat.c: Remove, there is no native go32 support.
* go32-xdep.c: Remove unused fork, fvork, wait, execlp, kill_inferior.
Wed Nov 4 15:27:31 1992 Stu Grossman (grossman at
* inflow.c (pass_signal, set_sigint_trap, clear_sigint_trap): Add
new routines to deal with sending SIGINTs to attached processes
when the user interrupts the controlling GDB.
* inftarg.c (child_wait), procfs.c (procfs_wait): Add calls to
the aforementioned routines when waiting for the attached process.
* elfread.c, mipsread.c: Include <string.h>.
* i386-stub.c: Include "ansidecl.h" to deal with prototypes.
* serial.h: Add prototype for serial_restore().
Wed Nov 4 11:13:25 1992 Ian Lance Taylor (
* minsyms.c (lookup_minimal_symbol_by_pc): subtract 1, not 2, from
minimal_symbol_count, because the NULL symbol is not included in
the count. This prevented this function from finding the last
symbol in the table.
Tue Nov 3 11:29:17 1992 Ian Lance Taylor (
* dbxread.c (process_one_symbol): if not defined
(BLOCK_ADDRESS_FUNCTION_RELATIVE), set function_start_offset at
the start of the function, not just after N_FUN.
Fri Oct 30 16:33:02 1992 Fred Fish (
* (, Add sed patterns to
remap all malloc's to xmalloc's and all realloc's to xrealloc's.
* c-exp.y, m2-exp.y: Add comment about how malloc/realloc are
remapped to xmalloc/xrealloc, use only malloc/realloc in grammer
file. Remove preprocessor defines that previously did remapping.
Fri Oct 30 00:58:18 1992 John Gilmore (
* infcmd.c (run_command): Avoid long calls to printf_filtered.
Bug fix courtesy of Alexander Klaiber.
Tue Oct 27 17:08:45 1992 K. Richard Pixley (
hp300 native support (hp300hpux untested).
* hp300ux-xdep.c: removed.
* xm-hp300bsd.h (REGISTER_U_ADDR): removed.
* xm-hp300hpux.h: updated copyright.
* nm-hp300bsd.h, nm-hp300hpux.h, hp300ux-nat.c: new files.
* (HFILES): added nm-hp300bsd.h and nm-hp300hpux.h.
* config/ (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o coredep.o corelow.o.
(NAT_FILE, NATDEPFILES): new macros.
* config/ (TDEPFILES): removed exec.o.
* config/ (XDEPFILES): removed infptrace.o inftarg.o
(NAT_FILE, NATDEPFILES): new macros.
* config/ (TDEPFILES): removed exec.o.
Vax ultrix native support.
* nm-vax.h: new file.
* (HFILES): added nm-vax.h.
* config/ (XDEPFILES): infptrace.o inftarg.o fork-child.o
coredep.o corelow.o removed.
(NAT_FILE, NATDEPFILES): new macros.
* xm-vax.h: updated copyright.
(REGISTER_U_ADDR): removed.
Apollo native support (untested).
* (HFILES): added nm-apollo68[bv].h.
* a68v-nat.c, nm-apollo68[bv].h: new files.
* xm-apollo68[bv].h (FETCH_INFERIOR_REGISTERS): removed.
* xm-apollo68b.h (PTRACE_IN_WRONG_PLACE): removed.
* a68v-xdep.c: removed.
* config/apollo68[bv].mh (XDEPFILES): removed infptrace.o
inftarg.o fork-child.o a68v-xdep.o.
(NAT_FILE, NATDEPFILES): new macros.
* defs.h: include nm.h.
* coredep.c, infptrace.c, procfs.c, rs6000-nat.c, sparc-nat.c,
sparc-tdep.c, : do not include nm.h.
Fri Oct 23 04:47:17 1992 Stu Grossman (grossman at
* (VERSION): 4.7.1 post release!
* config/ (NATDEPFILES): Add hppah-nat.o.
Fri Oct 23 00:48:08 1992 John Gilmore (
* (VERSION): gdb-4.7 release.
* README: Update for gdb-4.7.
Thu Oct 22 11:24:18 1992 Stu Grossman (grossman at
* sparc-tdep.c: include nm.h (for now) so that we get USE_PROC_FS
when necessary.
* alldeps.mak, depend: Update.
Thu Oct 22 03:14:36 1992 John Gilmore (
* partial-stab.h ('f', 'F'): Don't reference pst->textlow if pst
is null.
* tm-sun4sol2.h (PROLOGUE_FIRSTLINE_OVERLAP): Remove -- it
causes problems in setting breakpoint in the right place in
functions with `float' args which are passed as doubles.
* xm-vaxbsd.h (MEM_FNS_DECLARED): Avoid erroneous redecl's.
* config/ (NATDEPFILES): Add corelow.o.
Thu Oct 22 01:01:24 1992 Stu Grossman (grossman at
* (HFILES): Add nm-i386sco.h.
* dwarfread.c: include <sys/types.h> for SCO.
* infptrace.c: Don't include ptrace.h under SCO.
* config/ Use -D_POSIX_SOURCE instead of -posix for
* config/ Add exec.o to TDEPFILES.
Wed Oct 21 19:08:20 1992 Stu Grossman (grossman at
* i386v-nat.c: Remove space from front of #endif.
* irix4-nat.c: Remove externs of registers[], include inferior.h
* mips-nat.c: Explicitly initialize zerobuf to 0!
* mips-tdep.c (init_extra_frame_info): Undo John's last change.
Always setup fci->frame, even if it's non-zero. Too many places
depend upon this behavior (and I have to get a release out the
* mipsread.c (parse_partial_symbols, psymtab_to_symtab_1): Set
processing_gcc_compilation if we find the embedded stabs marker.
This fixes several bugs with finding the location of short or char
function parameters passed on the stack.
Wed Oct 21 17:46:07 1992 K. Richard Pixley (
Native support for sun4sol2.
* xm-sysv4.h (USE_PROC_FS, ATTACH_DETACH): removed to nm-sysv4.h.
* nm-sysv4.h: new file.
* (HFILES): added nm-sysv4.h.
* config/ (XDEPFILES): removed procfs.o fork-child.o.
(NAT_FILE, NATDEPFILES): new macros.
* config/ (TDEPFILES): removed exec.o and solib.o.
Wed Oct 21 03:51:01 1992 John Gilmore (
* coredep.c: Include "nm.h" to get REGISTER_U_ADDR.
* (VERSION): Tick to 4.6.9.
Tue Oct 20 23:27:56 1992 John Gilmore (
* mipsread.c (UNSAFE_DATA_ADDR): Remove MIPS-host-specific
definition, replace with portable one.
* remote-nindy.c: Lint.
(nindy_wait): Return type is int, result is inferior_pid.
* symmisc.c (dump_psymtab): Only print section_offsets if set.
(initialize_symmisc): Remove empty function.
* tm-spc-noun.h, tm-sun4os4.h, tm-sun4sol2.h (STACK_END_ADDRESS):
Remove obsolete, misspelled macro.
Wed Oct 21 00:14:34 1992 Stu Grossman (grossman at
* mips-nat.c (zerobuf): Get rid of const to avoid gcc warnings.
* xm-mips.h (offsetof): Don't define this if __STDC__.
Tue Oct 20 21:32:18 1992 K. Richard Pixley (
umax native support (untested).
* config/ (XDEPFILES): removed infptrace.o inftarg.o
(NAT_FILE, NATDEPFILES): new macros.
* config/ (TDEPFILES): removed exec.o.
removed to nm-umax.h.
* nm-umax.h: new file.
* (HFILES): added nm-umax.h.
hppa native support (untested).
* config/, config/ (XDEPFILES): now empty.
(NAT_FILE, NATDEPFILES): new macros.
* config/ (TDEPFILES): removed exec.o and hppab-core.o.
* config/ (TDEPFILES): removed exec.o.
* xm-hppa[bh].h (REGISTER_U_ADDR, U_REGS_OFFSET): removed.
* nm-hppa[bh].h, hppa[bh]-nat.c: new files.
* hppa[bh]-xdep.c: removed.
* hppa[bh]h-tdep.c: do not include ptrace.h.
* (HFILES): added nm-hppa[bh].h.
Tue Oct 20 00:01:46 1992 Stu Grossman (grossman at
* mips-nat.c: Straighten out include files. Work around
conflicting defs of JB_xxx syms in <setjmp.h> and <machine/pcb.h>
for Ultrix-4.2.
Mon Oct 19 15:09:57 1992 Stu Grossman (grossman at
* mips-nat.c (fetch_core_registers, register_addr): Copy from
coredep.c, but zero out FP_REGNUM & ZERO_REGNUM so that stack
backtraces from core files work.
* config/, config/ Remove coredep.o.
Functions are now defined in mips-nat.c.
* tm-irix3.h: Put MIPS_EFI_SYMBOL_NAME in here too.
* remote-hms.c: Disable all uses of serial_nextbaudrate and
* remote-hms.c, ser-go32.c, serial.h: Change from
serial_timedreadchar() to new serial_readchar().
* (HFILES): Fixup list of nm-*.h files. Add missing ones.
Mon Oct 19 12:45:23 1992 Per Bothner (
* c-exp.y: Moved handling of 'const' and 'volatile' from
<type> to <typebase>. This removes 2 conflicts.
Sun Oct 18 00:36:30 1992 Fred Fish (
* breakpoint.c (breakpoint_re_set_one): Don't delete watchpoints
from breakpoint table when reseting breakpoints.
Sat Oct 17 00:59:23 1992 Fred Fish (
Native support cleanup and corefile fixes for i386 SVR4 systems.
* i386-tdep.c (supply_gregset, fill_gregset, supply_fpregset,
fill_fpregset): Moved to i386v4-nat.c
* i386v4-nat.c, nm-i386v4.h, : New files.
*,, (NAT_FILE): Use nm-i386v4.h.
*,, (NATDEPFILES): Add corelow.o,
change i386v-nat.o to i386v4-nat.o.
Fri Oct 16 13:06:08 1992 K. Richard Pixley (
Miscellaneous 386 configs updated.
* config/ (TDEPFILES): removed exec.o.
* config/, config/, config/
(XDEPFILES): removed procfs.o fork-child.o i386-xdep.o.
(NAT_FILE, NATDEPFILES): new macros.
* config/, config/, config/,
config/ (TDEPFILES): removed exec.o.
* config/ (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o coredep.o corelow.o i386-xdep.o i387-tdep.o.
(NAT_FILE, NATDEPFILES): new macros.
* config/ (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o coredep.o corelow.o i386-xdep.o.
(NAT_FILE, NATDEPFILES): new macros.
Native support cleanup for i386bsd (untested).
* config/ (NATDEPFILES): exec.o removed.
* config/ (NATDEPFILES): added exec.o
* tm-i386bsd.h (FLOAT_INFO): removed.
* nm-i386bsd.h (FLOAT_INFO): added.
Native support for i386v (untested).
* config/ (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o coredep.o corelow.o i386-xdep.o i387-tdep.o.
(NAT_FILE, NATDEPFILES): new macros.
* config/ (TDEPFILES): removed exec.o, added i387-tdep.o.
* i386-xdep.c: removed.
* (HFILES): added nm-i386v.h
* i386v-nat.c, nm-i386v.h: new file.
* xm-i386v.h: (REGISTER_U_ADDR, i386_register_u_addr): removed to
* tm-i386v.h (FLOAT_INFO): removed.
Native support for linux (untested).
* config/ (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o coredep.o corelow.o i387-tdep.o i386-xdep.o.
(NAT_FILE, NATDEPFILES): new macros.
* config/ (TDEPFILES): removed exec.o, added i387-tdep.o.
* (HFILES): added nm-linux.h.
* nm-linux.h: new file.
* xm-linux.h: updated copyright. cleaned up formatting.
(ATTACH_DETACH, U_REGS_OFFSET): removed to nm-linux.h.
Native support for sun386 (untested).
* config/ (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o sun386-xdep.o.
(NAT_FILE, NATDEPFILES): new macros.
* config/ (TDEPFILES): removed exec.o.
* (HFILES): added nm-sun386.h.
* sun386-nat.c, nm-sun386.h: new file.
* sun386-xdep.c: removed.
* xm-sun386.h: updated comment and copyright.
Native support for i386mach (untested).
* config/ (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o mach386-xdep.o.
(NAT_FILE, NATDEPFILES): new macros.
* (HFILES): added nm-i386mach.h.
* nm-i386mach.h, i386mach-nat.c: new files.
* mach386-xdep.c: removed.
* xm-i386mach.h: updated copyright.
Native separation for go32 (untested).
* config/ (NAT_FILE, NATDEPFILES): new macros.
* go32-nat.c: new file.
* go32-xdep.c (call_ptrace, child_resume,
fetch_inferior_registers, store_inferior_registers,
child_xfer_memory, fetch_core_registers): removed to go32-nat.c.
Native support for m88k (untested).
* (HFILES): added nm-m88k.h
* xm-delta88.h, xm-m88k.h (REGISTER_U_ADDR,
* config/, config/ (XDEPFILES): infptrace.o
inftarg.o fork-child.o m88k-xdep.o removed to NATDEPFILES.
(NAT_FILE, NATDEPFILES): new macros.
* config/, config/ (TDEPFILES): removed exec.o.
* m88k-nat.c, nm-m88k.h, nm-delta88.h: new files.o.
* m88k-xdep.c: removed.
Fri Oct 16 04:16:30 1992 John Gilmore (
* i386b-nat.c: Comment changes.
* nm-i386bsd.h, xm-i386bsd.h: Split native dependent pieces out
into new nm-file.
* config/ (NAT_FILE): Point to new nm-file.
Fri Oct 16 03:34:01 1992 John Gilmore (
Avoid longjmp()-catching compilation errors in cross-ports.
* irix4-nat.c, mips-nat.c (JB_ELEMENT_SIZE, get_longjmp_target):
Move from mips-tdep.c and tm-{irix3,mips}.h.
* mips-nat.c: Remove a bunch of code that was ifdef'd out of
native MIPS ports.
* nm-irix3.h, nm-mips.h (GET_LONGJMP_TARGET): Move from tm-irix3.h
and tm-mips.h.
* ultra3-nat.c (register_addr): Move from ultra3-xdep.c.
(fetch_core_registers): Fix bfd_seek arguments.
Fri Oct 16 03:02:28 1992 John Gilmore (
Make core files work again (add back the `core' target).
* config/,,,
(NATDEPFILES): Add corelow.o.
* config/, (TDEPFILES): Remove coredep.o, it's
native dependent.
* config/,,,,,,,,,,,,,,,,,, (XDEPFILES): Add corelow.o whenever coredep.o
appears. FIXME, these should be moved to NATDEPFILES for native
use only.
Thu Oct 15 21:53:53 1992 K. Richard Pixley (
Ultra3 host/target/native split. (untested).
* ultra3-xdep.c: updated copyright. Do not include sys/ptrace.h.
(fetch_register, fetch_inferior_registers,
store_inferior_registers, fetch_core_registers): removed to
to nm-ultra3.h.
* (HFILES): added nm-ultra3.h.
* nm-ultra3.h, ultra3-nat.c: new files for native support.
* config/ (XDEPFILES): removed infptrace.o inftarg.o
(NAT_FILE, NATDEPFILES): new macros for native support.
* config/ (TDEPFILES): exec.o removed.
* xm-vaxult.h: add MEM_FNS_DECLARED.
Thu Oct 15 02:59:30 1992 John Gilmore (
* (VERSION): Roll to 4.6.8.
(OBS): Put version.o first, so Makefile rebuild happens early.
* command.h: Publicize prototype for not_just_help_class_command.
* command.c: Remove proto.
* maint.c: Mark "mt" as an abbrev, to avoid duplicated help
output. Move "maint info" from class info to class maintenance,
and improve text.
* infrun.c: Move "stop" to class_obscure, and give it a
function so it will not be seen as a global help topic. FIXME,
it should be possible to set these attributes independently.
* core.c (core_command): Make nicer error message for no core support.
Lint around file_ptr's (bfd's off_t's) and bfd_seek.
* dbxread.c (read_dbx_symtab): Use L_SET as bfd_seek arg.
(elfstab_build_psymtabs): staboffset and stabstroffset args are
* dwarfread.c (struct dwfinfo): Convert dbfoff, lnfoff to file_ptr.
(scan_compilation_units): Punt unused filename arg. dbfoff,
lnoffset, and curlnoffset are file_ptr's now.
(dwarf_build_psymtabs): Drop desc and filename args; use
objfile. dbfoff and lnoffset are file_ptr's now.
(read_ofile_symtab): foffset is now file_ptr. Use L_SET in bfd_seek.
* elfread.c (struct elfinfo): dboffset and lnoffset are file_ptr's.
(elf_symfile_read): Skip desc and filename args to
dwarf_build_psymtabs. Pass file_ptr's to elfstab_build_psymtabs.
* gdb-stabs.h: Use file_ptr rather than off_t.
* mipsread.c (fixup_symtab): f_ptr is a file_ptr. Re-enable
compile-time debug check that someone turned off as "unused".
(read_the_mips_symtab): st_filptr is a file_ptr. Fix bfd_seek call.
* symfile.h: Update dwarf_build_psymtabs and
elfstab_build_psymtabs prototypes.
* xcoffread.c (init_stringtab, init_lineno, xcoff_symfile_read):
Use file_ptr offsets. bfd_seeks use L_SET.
Thu Oct 15 01:27:32 1992 Stu Grossman (grossman at
* mips-tdep.c, mipsread.c, tm-mips.h: Get rid of ".gdbinfo."
symbol. #define MIPS_EFI_SYMBOL_NAME instead. Use different
value so that demangler won't be invoked. This greatly speeds up
* mips-tdep.c (mips_pop_frame): Rewrite handling of
linked_proc_info so that it properly deallocates the appropriate
item after it is done with it instead of before.
* Don't pass bogus frame pointer to create_new_frame(). Just
leave it as zero so that lower level code will figure out the
correct value.
Wed Oct 14 18:56:28 1992 K. Richard Pixley (
Sony News native support.
* (HFILES): added nm-news.h.
* nm-news.h: new file.
* config/ (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o coredep.o to NATDEPFILES.
(NAT_FILE, NATDEPFILES): new macros for native support.
* config/ (TDEPFILES): removed exec.o.
* remote-vx.c: remove redundant include of sys/time.h.
* infrun.c: include ctype.h. Otherwise some machines result in
undefined for isdigit.
Tue Oct 13 01:27:14 1992 John Gilmore (
* Convert m68k entries to m68* entries to handle
all the various m68xxx hosts and targets.
* config/ No longer needed, same as
Fri Oct 9 18:54:37 1992 K. Richard Pixley (
* config/sun3os[34].mh (NATDEPFILES): remove duplicate inftarg.o.
Fri Oct 9 14:20:08 1992 Stu Grossman (grossman at
* (HFILES): Add all nm-irix3.h, nm-irix4.h,
nm-sun2.h, nm-mips.h.
* config/ (NATDEPFILES): nat-mips.o => mips-nat.o.
* (alldeps.mak): Add = sign after NATDEPFILES.
* config/ config/ Remove mips-xdep.o.
Fri Oct 9 08:41:11 1992 Ian Lance Taylor (
* xm-hppah.h: if __STDC__ is not defined, define
symtab.c (decode_line_1): avoid a bug in the HP9000/700 native
compiler; see the comment in the file.
Fri Oct 9 04:43:43 1992 John Gilmore (
First cut at support for all BSD variants on 386.
* tm-i386bsd.h, xm-i386bsd.h: New config files.
* i386b-nat.c: New native support file.
* Add host and target for i[34]86-*-bsd*.
* config/, config/ New config files.
Fri Oct 9 00:31:33 1992 K. Richard Pixley (
Sun2 native support (untested).
REGISTER_U_ADDR): removed to nm-sun2.h.
* nm-sun2.h: new file.
* config/sun2os[34].mh (XDEPFILES): infptrace.o inftarg.o
fork-child.o sun3-xdep.o removed.
(NAT_FILE, NATDEPFILES): new macros.
Mips native support. Decstation and iris4 have been tested.
Iris3 has not.
* mips-tdep.c (supply_gregset, fill_gregset, supply_fpregset,
fill_fpregset): removed to irix4-nat.c
* mips-xdep.c: removed.
* irix4-nat.c, mips-nat.c, nm-irix3.h, nm-irix4.h, nm-mips.h: new
* procfs.c: include nm.h.
* xm-irix4.h: bump copyright.
PROC_NAME_FMT): removed.
* xm-mips.h (FETCH_INFERIOR_REGISTERS): removed.
* config/ (XDEPFILES): removed procfs.o fork-child.o.
(NAT_FILE, NATDEPFILES): new macros for native support.
(CC): supply default compiler switches.
* config/ (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o coredep.o.
(NAT_FILE, NATDEPFILES): new macros for native support. Note that
irix3 is untested.
* config/ (XDEPFILES): removed infptrace.o inftarg.o
fork-child.o mips-xdep.o coredep.o.
(NAT_FILE, NATDEPFILES): new macros for native support.
Thu Oct 8 23:50:51 1992 K. Richard Pixley (
* config/ (XDEPFILES): removed fork-child.o.
(NATDEPFILES): added fork-child.o
* config/ (XDEPFILES): removed fork-child.o.
(NATDEPFILES): added fork-child.o
* config/ (XDEPFILES): removed fork-child.o.
(NATDEPFILES): added fork-child.o
Thu Oct 8 23:19:25 1992 John Gilmore (
* infcmd.c (path_info): Avoid 250-char limit on printf_filtered,
by using puts_filtered instead.
Fri Oct 9 00:28:25 1992 Ken Raeburn (
* remote-nindy.c (nindy_load): Replacement version from Steve
Chamberlain, doesn't require forking to run "strip" or "sx".
Thu Oct 8 18:27:35 1992 Stu Grossman (grossman at
* (HFILES): Add nm-*.h files.
Thu Oct 8 16:27:45 1992 K. Richard Pixley (
* config/ (XDEPFILES): fork-child.o removed.
(NATDEPFILES): added fork-child.o.
Thu Oct 8 13:52:46 1992 Stu Grossman (grossman at
* alldeps.mak depend: Rip out 29k/udi pending
resolution of copyright issues.
Wed Oct 7 20:08:53 1992 Stu Grossman (grossman at
* (setup-to-dist): Remove -norecursion so that doc
subdir gets configured.
Wed Oct 7 12:24:01 1992 Ken Raeburn (
* (nindy.o): Define "STRIP" as pathname of strip
* nindy-share/nindy.c (coffstrip): Use that pathname, instead of
searching for a "bfd_strip" program. Also, fixed up arguments
passed to that program.
* tm-nindy960.h (ADDITIONAL_OPTIONS): Use "-ser" rather than "-r",
which is now used for something else. Rewrite description of
associated parameters to match how gdb does it now.
(ADDITIONAL_OPTION_HELP): Fix message accordingly.
* m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
Tue Oct 6 14:47:11 1992 K. Richard Pixley (
NOTICE_SIGNAL_HANDLING_CHANGE macro added to the target vector as
* inferior.h (proc_signal_handling_change): prototype removed.
* infrun.c (NOTICE_SIGNAL_HANDLING_CHANGE): default removed.
(handle_command): now calls target_notice_signals.
* procfs.c (proc_signal_handling_change): renamed to
procfs_notice_signals. Now static. Add prototype. All callers
* target.h (struct target_ops): new field, to_notice_signals.
(target_notice_signals): new macro to cover new field.
* target.c (cleanup_target): default to_notice_signals to ignore.
* corelow.c (core_ops),
exec.c (exec_ops),
inftarg.c (child_ops),
procfs.c (procfs_ops),
remote-adapt.c (adapt-ops),
remote-eb.c (eb_ops),
remote-es1800.c (es1800_ops, es1800_child_ops),
remote-hms.c (hms_ops),
remote-mm.c (mm_ops),
remote-nindy.c (nindy_ops),
remote-st2000.c (st2000_ops),
remote-udi.c (udi_ops),
remote-vx.c (vx_ops, vx_run_ops),
remote.c (remote_ops),
target.c (dummy_target),
xcoffexec.c (exec_ops): added static initializer for
* xm-irix4.h, xm-sysv4.h (NOTICE_SIGNAL_HANDLING_CHANGE): removed.
Tue Oct 6 12:13:08 1992 John Gilmore (
* main.c (define_command): Add forgotten initializer.
Tue Oct 6 02:23:17 1992 John Gilmore (
* language.c, language.h: Move saved_language out to global
expected_language. Set expected_language when user expectation
* language.c (language_info): Don't print type/range checking gub.
* main.c (main): Set expected language.
(execute_command): Check against expected language.
* symfile.c (set_initial_language): Set expected language.
*, config/i386sol2.{mh,mt}: Preliminary Solaris-x86 conf.
Fri Sep 4 00:34:30 1992 Per Bothner (
A bunch of changes mostly to improve debugging of C++ programs.
Specifically, the calling of inferiors methods is improved.
* value.h: New macros METHOD_PTR_IS_VIRTUAL,
hide the implementation details of pointer-to-method objects.
How to tell if the pointer points to a virtual method is
still very dependent on the particular compiler, but this
should make it easier to find the places to change.
* eval.c (evaluate_subexp [case OP_FUNCALL]), valprint.c
(val_print [case TYPE_CODE_PTR]): Use the new METHOD_PTR_*
macros, instead of a hard-wired-in code that incorrectly
assumed a no-longerused representation of pointer-to-method
values. And otherwise fix the relevant bit-rotted code.
* valprint.c (type_print_base [case TYPE_CODE_STRUCT]):
If there are both fields and methods, put a space between.
* stabsread.c (read_struct_type): Fix bug in handling of
GNU C++ anonymous type (indicated by CPLUS_MARKER followed
by '_'). (It used to prematurely exit the loop reading in
the fields, so it would think it should start reading
methods while still in the fields. This could crash gdb
given a gcc that can emit nested type information.)
* valops.c (search_struct_method): Pass 'this' value by
reference instead of by value. This provides a more
consistent interface through a recursive search where the
"bottom" functions may need to adjust offsets (due to multiple
* valops.c, value.h, values.c: Pass extra parameters to
value_fn_field and value_virtual_fn_field so we can
correctly adjust offset for multiple inheritance.
* eval.c (evaluate_subexp [case OP_FUNCALL]): Simplify
virtual function calls by using value_virtual_fn_field().
* values.c: New function baseclass_offset, derived from
baseclass_addr (which perhaps can be made obsolete?).
It returns an offset rather than an address. This is a
cleaner interface since it doesn't mess around allocating
new values.
* valops.c (search_struct_method): Use baseclass_offset
rather than baseclass_addr.
Mon Oct 5 16:02:04 1992 Stu Grossman (grossman at
* Re-install 29K/UDI stuff.
* remote-udi.c (udi_resume): Clean up.
* (udi_wait): Rewrite, leave out bugs.
* Add debugging code to print out all register fetches and stores.
* Straighten out target_ops.
* tm-29k.h (DUMMY_FRAME_RSIZE): Pad out to doubleword.
Mon Oct 5 09:46:44 1992 Ian Lance Taylor (
* remote-udi.c (udi_create_inferior): run with no arguments should
not pass the program name as an argument, since the UDI code
already handles that.
(udi_load): get the symbols from prog_name, not arg_string (the
load command should really use arg_string as the program name, not
prog_name, but at least the run command works now).
* munch: HP9000/300 nm puts an extra space between T and symbol
* config/ added -lsun to XM_CLIBS to get RPC functions
needed for vxworks targets.
Fri Oct 2 22:04:42 1992 John Gilmore (
* am29k-tdep.c (_initialize_29k): Make it possible for the
user to set and query the address where function calls into the
inferior write a small scratch routine. `set call_scratch_address'
* inferior.h (PC_IN_CALL_DUMMY): Fix fencepost error.
* remote.c (remote_prepare_to_store): Only fetch regs if they are
not already cached validly.
Thu Oct 1 14:36:42 1992 K. Richard Pixley (
Rs6000 native support.
* infptrace.c: remove #ifdef USG from around include ptrace.h.
machines without this header should not be compiling this file.
* nm-rs6000.h, rs6000-nat.c: new files for native support.
* rs6000-tdep.c: do not include sys/ptrace.h or sys/reg.h.
* rs6000-xdep.c: removed. all code now in rs6000-nat.c.
* xm-rs6000.h: do not include ptrace.h.
* config/ (XDEPFILES): removed rs6000-xdep.o.
infptrace.o and inftarg.o move to NATDEPFIES.
(NAT_FILE, NATDEPFILES): new macro for native support.
Sun3 native support.
* config/, config/ (NAT_FILE, NATDEPFILES):
new macros for native support.
(XDEPFILES): moved infptrace.o and inftarg.o to NATDEPFILES,
removed sun3-xdep.o.
* sun3-xdep.c: removed. All code is now in sun3-nat.c.
* sun3-nat.c, nm-sun3.h: new files for native support.
Thu Oct 1 10:30:54 1992 Fred Fish (
* dwarfread.c (dbsize): New variable to hold size of dwarf info.
* dwarfread.c (dwarf_build_psymtabs): Rename dbsize parameter to
dbfsize and use it to initialize new local file scope dbsize.
* dwarfread.c (read_ofile_symtab): Initialize dbsize and use it.
* dwarfread.c (basicdieinfo): Use dbsize to check for oversize
DIEs as well as the current check for undersize DIEs. This helps
to gracefully detect and reject corrupted DIE information.
Thu Oct 1 01:57:56 1992 John Gilmore (
Add `command hooks' and a hook for inferior program stopping.
* command.h (struct cmd_list_element): Remove unused `aux'
field. Add new `hook', `hookee', and `cmd_pointer' fields.
* command.c (add_cmd): Initialize new fields, elim old.
(add_alias_cmd): Clone new fields.
(delete_cmd): Un-hook hookee if we're deleting hook.
(help_cmd): Tell user the command is hooked, if it is.
(lookup_cmd_1): Abbreviations return the original command
instead of themselves, so that hooks on the original cmd will be
* defs.h (enum command_class): Add class_pseudo and comments.
* gdbcmd.h (execute_user_command): Add prototype.
* infrun.c (normal_stop): If the stop command is hooked,
run the hook whenever we stop.
(hook_stop_stub): Stub for catch_errors.
(_initialize_infrun): Set up pseudo "stop" command.
* main.c (execute_user_command): Code extracted from execute_command.
(execute_command): If hooked, run the hook before the command.
(define_command): If defining a new hook, check the command it
is hooking, and warn if none. Install the hook.
* source.c (_initialize_source): "l" is an abbrev for "list".
* (VERSION): Roll to 4.6.7.
* config/ Remove dup inftarg.o from NATDEPFILES.
* infrun.c (breakpoints_inserted): Make it static again.
* tm-symmetry.h (FLOAT_INFO): #if 0 it for cross-ptrace abuse.
Wed Sep 30 15:33:22 1992 K. Richard Pixley (
Native file renaming.
* nat-sparc.c -> sparc-nat.c
* nat-sun4os4.h -> nm-sun4os4.h
* nat-trash.h -> nm-trash.h
* config/ track file renaming.
* link to nm.h rather than nat.h.
* infptrace.c: include nm.h rather than nat.h.
Tue Sep 29 14:35:00 1992 K. Richard Pixley (
Host/target/native split for sun4.
* (TSOBS): removed corelow.o.
* infptrace.c: included nat.h.
* nat-trash.h: temporary header file. This should be removed once
all hosts have the native/host/target split.
* add a symlink from nat-trash.h to nat.h if no
other nat file exists for this configuration.
* sparc-tdep.c: no longer include sys/ptrace.h.
* sparc-xdep.c: removed. contents have been moved to nat-sparc.c.
* nat-sparc.c, nat-sun4os4.h: new files for sun4 native support.
* config/ (XDEPFILES): moved infptrace.o and inftarg.o
to NATDEPFILES. removed sparc-xdep.o.
(NATDEPFILES, NAT_FILE): new macros for native support.
Break the direct connection from core_file_command to any
particular type of core file support.
* target.h (find_core_target): new prototype.
* target.c (find_core_target): new function. Walks the target
list looking for the core target.
* core.c (core_file_command): replace calls to core_detach and
core_open with find_core_target and direct calls.
Tue Sep 29 10:19:00 1992 Ian Lance Taylor (
* xm-hp300hpux.h: define MEM_FNS_DECLARED; include <sys/ptrace.h>
for infptrace.c.
config/ ALLOCA1 was not defined.
Mon Sep 28 22:03:41 1992 Stu Grossman (grossman at
* breakpoint.c, exec.c, language.c, main.c, printcmd.c, symfile.c,
target.c, valprint.c: Use unfiltered forms of f/printf, et. al.
until we can figure out a better way to do paging.
Sat Sep 26 02:07:31 1992 John Gilmore (
* findvar.c (supply_register): Add CLEAN_UP_REGISTER_VALUE hook.
* tm-hppa.h (CLEAN_UP_REGISTER_VALUE): Use it.
* hppa-coredep.c: Remove, now that we use the hook.
* config/, config/ Use standard coredep.o.
* hppab-xdep.c, hppah-xdep.c: Remove custom code, use hook.
* dbxread.c, partial-stab.h: Replace all #ifdef hp9000s800's with
GDB_TARGET_IS_HPPA's. This is a SERIOUS KLUDGE. The code needs to all
be ripped out and reimplemented right (see elfread.c).
* tm-hppa.h (GDB_TARGET_IS_HPPA): Define.
Rename all HPPA files to fit into unique DOS filenames:
* *hppabsd* => *hppab*
* *hppahpux* => *hppah*
Sat Sep 26 00:25:15 1992 John Gilmore (
Make the /proc support a target-struct in its own right.
* Remove inftarg.[co], since it is now included via
config/*.mh files.
* config/*.mh: Add inftarg.o and fork-child.o to all *.mh that
reference infptrace.o. Add fork-child.o to all *.mh that
reference procfs.o.
* inferior.h (proc_wait, inferior_proc_init, proc_set_exec_trap):
No longer global functions.
(fork_inferior): New global function from fork-child.c.
* inftarg.c (child_wait): Remove USE_PROC_FS conditional.
(ptrace_me, ptrace_him): New stub functions for fork_inferior().
(child_create_inferior): Moved to fork-child.c as fork_inferior.
(child_create_inferior): New tiny function that calls fork_inferior.
* fork-child.c: New file, containing fork_inferior, which is
built from slight mods to inftarg.c's child_create_inferior.
* procfs.c (procfs_ops): Add target vector.
(attach): Rename as static do_attach.
(procfs_create_inferior): New tiny function that calls fork_inferior.
(child_xfer_memory): Rename to static procfs_xfer_memory.
(store_inferior_registers): Rename to static procfs_store_registers.
(inferior_proc_init): Rename to static procfs_init_inferior.
(procfs_attach, procfs_detach, procfs_prepare_to_store,
procfs_files_info, procfs_open, procfs_mourn_inferior,
procfs_can_run): Slightly mangled copies of the corresponding
child_XXX routines from inftarg.c.
(proc_wait): Renamed to static procfs_wait.
(child_resume): Rename to static procfs_resume.
(fetch_inferior_registers): Rename to static procfs_fetch_registers.
(initialize_proc_fs): Rename to initialize_procfs. Set up
procfs_ops, too.
* putenv.c: index -> strchr.
* regex.c: Always rename bcopy to memcpy, etc.
FIXME: Eventually do the renames rather than use #define's.
* sparc-tdep.c (deferred_stores): Moved from sparc-xdep.c.
Fix bcopy->memcpy.
* sparc-xdep.c: Move deferred_stores to target dependent.
* xm-irix4.h, xm-sysv4.h (CREATE_INFERIOR_HOOK): No longer needed.
Fri Sep 25 21:59:27 1992 John Gilmore (
Split non-target-dependent code out of target_attach routines.
* target.h: Comments on target_attach args and results.
* infcmd.c (attach_command): Check for existing execution, call
target_attach, set up terminal status and wait_for_inferior, wait
for the attach status, and do normal_stop.
* inftarg.c (child_attach): Remove target independent stuff.
* remote-adapt.c (adapt_attach): Ditto.
* remote-mm.c (mm_attach): Ditto.
* remote-udi.c (udi_attach): Ditto.
* remote-vx.c (vx_attach): Ditto.
* remote-hms.c (hms_attach): Remove completely, it was useless.
* remote-mm.c, remote-hms.c, remote-udi.c, remote-adapt.c: Remove
commented-out start_remote calls.
* remote-hms.c, remote-adapt.c, remote-mm.c, remote-udi.c: Remove
DENTER and DEXIT macros and their calls. Use a real debugger --
like gdb -- to see what functions are being called when.
* utils.c (strcmp_iw): Make nonstatic, for lint.
Fri Sep 25 18:48:20 1992 John Gilmore (
* infrun.c, inftarg.c, inferior.h: Comment and lint cleanups.
Fri Sep 25 15:13:44 1992 Stu Grossman (grossman at
* tm-sparc.h, dbxread.c (read_ofile_symtab): Install Jim Wilson's
fix to differentiate between gcc1 & gcc2 compiled files so that we
can debug calls that pass structs as args correctly.
* symmisc.c (dump_symtab): If block was compiled with gcc, say
so, and what version.
* remote.c (remote_wait): Make regs be char to avoid picayune
ANSI compiler warnings.
* energize.h: Move all external struct decls to inside of
__STDC__, add prototype for energize_shell_wait().
* energize.c (getpty): Clean up, make us really get a controlling
* (energize_initialize): Disable SIGIO prior to setting up for
I/O interrupts. Move setsid(), et. al. to getpty().
* (energize_shell_wait): New routine to wait for things started
via the shell command, uses wait() instead of /dev/proc.
* Also, add prototype for execute_command_1().
Fri Sep 25 12:09:33 1992 K. Richard Pixley (
* inftarg.c (child_create_inferior, child_attach,
child_mourn_inferior): collect unix child process stratum
functions which live below the target vector into this file to
facilitate host/target/native split. Also, make them static.
* inflow.c (child_mourn_inferior): removed.
* infrun.c (child_create_inferior, child_attach): removed.
(resume): becomes global so that functions below the
target vector can find it.
* inferior.h (resume): add prototype.
(child_mourn_inferior, child_create_inferior, child_attach):
remove prototypes.
* xcoffexec.c (exec_ops): child_attach and child_create_inferior
replaced with find_default_attach and
Fri Sep 25 10:21:04 1992 Ken Raeburn (
* i960-pinsn.c: Use _filtered routines for printing, so symbolic
addresses don't get displayed in the wrong positions.
Fri Sep 25 09:52:47 1992 K. Richard Pixley (
Separate core functions along target vector in preparation for
native support. Functions above vector now live in core.c. Those
below in corelow.c.
* core.c (solib_add_stub, core_close, core_open, core_detach,
get_core_registers, core_files_info, core_ops): moved to corelow.c
(_initialize_core): removed addition of core_ops target.
* corelow.c: new file.
(solib_add_stub, core_close, core_open, core_detach,
get_core_registers, core_files_info, core_ops): moved from core.c
(_initialize_corelow): new function.
* gdbcore.h (core_open, core_detach): added prototypes.
(core_ops): add forward declaration.
* (SFILES_MAINDIR): add core.c
(OBS): add core.o
(TSOBS): change core.o to corelow.o
Wed Sep 23 11:14:53 1992 Stu Grossman (grossman at
* m68k-tdep.c (m68k_saved_pc_after_call): Use 'GDB_TARGET_IS_SUN3'
instead of 'sun' predefined symbol so that trap analysis code is
enabled only when the TARGET is a sun3.
Tue Sep 22 17:13:19 1992 Ken Raeburn (
* tm-i960.h (ext_format_i960): Add top-level declaration.
(REGISTER_CONVERT_TO_{VIRTUAL,RAW}): Don't declare it in nested
blocks, else Sun4 compiler complains.
Tue Sep 22 00:43:51 1992 John Gilmore (
* mips-pinsn.c (print_insn_arg, case 'B'): Disassemble `break'
instruction's argument. Patch from
(Jonathan Stone).
Mon Sep 21 18:16:30 1992 K. Richard Pixley (
Break the thread of control that implies that a unix child
process will be the default target.
* target.c (find_default_run_target, find_default_attach,
find_default_create_inferior, return_zero): new functions.
(cleanup_target): Make return_zero the default for to_can_run.
* exec.c (exec_ops), core.c (core_ops): Replace child_attach and
child_create_inferior references with find_default_XXX instead.
* target.h (struct target_ops): new field, to_can_run.
(find_default_attach, find_default_create_inferior): new prototypes.
(target_can_run): new macro.
* Also added a zero (default) to_can_run element to all static
struct target_ops initializations throughout GDB, except:
* inftarg.c (child_ops): Use new child_can_run() to enable child runs.
* infrun.c (child_create_inferior): Clean up error handling when
no exec file is specified.
(child_attach): Don't require exec file.
Mon Sep 21 19:43:13 1992 John Gilmore and K. Richard Pixley (
Remove kill_inferior_fast, in favor of target_kill, which goes
through the target vector.
* inferior.h (kill_inferior_fast): remove declaration.
* main.c (disconnect): call quit_cover using catch_errors rather
than calling kill_inferior_fast directly. New way goes through
the target vector, handles attached processes, and writes
command history if appropriate.
(quit_cover): new function, wrapper for quit_command.
* convex-xdep.c, go32-xdep.c, hppabsd-xdep.c, hppahpux-xdep.c,
infptrace.c, procfs.c: Removed all instances of kill_inferior_fast,
inlining them into the local kill_inferior when needed.
Mon Sep 21 19:23:05 1992 John Gilmore (
* infrun.c (_initialize_infrun): Alias `i handle' == `i signals'.
* stabsread.c (read_struct_type): Simplify complicated expression
for dumb DECstation compiler.
Mon Sep 21 14:54:35 1992 Ian Lance Taylor (
* m68k-pinsn (print_insn_arg, fetch_arg): added support for
operands to memory management instructions, from WRS.
Sep 20 08:42:12 1992 Fred Fish (
* main.c (main): Back out previous language setting changes.
Replace with simple default to C before processing any init
files. There MUST be a language set, even in the absence of
init files or executables, or expression parsing fails.
Sat Sep 19 09:52:26 1992 Fred Fish (
* main.c (main): Move code that sets initial language to
symfile.c. Fixup places where command files are processed to
be consistent in setting a default language if none has been
previously set.
* symfile.c (set_initial_language): Add code moved from
main() that sets an initial default language when a new
symbol file is read.
* symfile.c (symbol_file_command): Call set_initial_language.
* symtab.c (find_main_psymtab): Add FIXME comment.
Wed Sep 16 22:31:55 1992 K. Richard Pixley (
* breakpoint.c, sparc-tdep.c: comment changes.
* removed target_dependent line.
* remote-mm.c (mm_attach): change printf to error to prevent
fallthrough bug.
* remote-udi.c (udi_attach): change printf to error to prevent
fallthrough bug.
* rs6000-tdep.c (push_dummy_frame, pop_dummy_frame): replace
calls to {fetch|store}_inferior_registers with calls to
target_{fetch|store}_registers, for remote-target independence.
Sat Sep 19 04:23:54 1992 John Gilmore (
* Fix bug I introduced in merging Rich's change.
* infrun.c (child_create_inferior): Use proceed() rather than
doing all the same stuff by hand.
Thu Sep 17 17:35:37 1992 K. Richard Pixley (
*, add support for files used only when
configured native, that is, when host = target.
Wed Sep 16 23:03:23 1992 K. Richard Pixley (
* tm-sparc.h, xm-sparc.h: externs and macros relating to deferred
stores are target dependent and were moved from xm to tm.
Sat Sep 19 03:14:37 1992 John Gilmore (
* (gdb-all.texi): Build in objdir, not $srcdir.
overrides, to avoid problem in xdr_bytes with malloc(0) => 0.
Wed Sep 16 20:04:54 1992 K. Richard Pixley (
* target.h (struct target_ops): removed to_convert_to_virtual and
to_convert_from_virtual elements. Initializations removed from
all static initializations.
(target_convert_to_virtual, target_convert_from_virtual):
(host_convert_to_virtual, host_convert_from_virtual): Removed
forward declarations.
* target.c (cleanup_target): removed default assignments for
to_convert_to_virtual and to_convert_from_virtual.
* inftarg.c (host_convert_to_virtual, host_convert_from_virtual):
* findvar.c (value_of_register, value_from_register):
target_convert_to_virtual inlined.
* infcmd.c (do_registers_info): target_convert_to_virtual inlined.
* valops.c (value_assign): target_convert_from_virtual inlined.
Fri Sep 18 02:07:39 1992 John Gilmore (
* main.c (gdb_readline): Avoid printf_filtered, which sets char
position wrong if used for the prompt.
* utils.c (puts_filtered): Comment: NOT a puts() replacement!
Support for accessing arbitrary MIPS stack frames in memory.
* blockframe.c (get_prev_frame_info): If INIT_FRAME_PC_FIRST is
set, run it before INIT_EXTRA_FRAME_INFO.
* stack.c (frame_info): If PRINT_EXTRA_FRAME_INFO defined, call it.
* mips-tdep.c (init_extra_frame_info): Only clobber the `frame'
(FP) value in the frame_info struct if it is zero (as from top of
execution stack).
(setup_arbitrary_frame): Implement FRAME_SPECIFICATION_DYADIC.
* mips-xdep.c (fetch_inferior_registers): ZERO_REGNUM always
comes back as zero. So does FP_REGNUM, as a trigger for
* tm-mips.h (INIT_FRAME_PC_FIRST): Kludge, FIXME, defined to get
the program counter set before INIT_EXTRA_FRAME_INFO is run.
(INIT_FRAME_PC): Defined to null.
(PRINT_EXTRA_FRAME_INFO): print frame pointer location via symtab.
(FRAME_SPECIFICATION_DYADIC): Ask for two args in frame command.
Briefly explain MIPS stacks in GDB.
Thu Sep 17 03:49:59 1992 John Gilmore (
* copying.awk, copying.c (show_copying_command,
show_warranty_command): Rename from copying_info, warranty_info,
to match command function conventions.
* utils.c (prompt_for_continue): Reinitialize more-counts
before printing anything, and again afterward. Fix comments.
(vfprintf_filtered): Eliminate static buffer; use auto buffer,
or alloca() if needed.
* rs6000-xdep.c: Use correct conditional (IBM6000_TARGET) to
detect native versus cross-host.
Wed Sep 16 21:57:14 1992 Stu Grossman (grossman at
* m68k-tdep.c (sun3_saved_pc_after_call): Only do trap check for
Suns. Rename to m68k_saved_pc_after_call.
* tm-68k-noun.h, tm-sun3.h (SAVED_PC_AFTER_CALL): Use
m68k_saved... instead of sun3_saved...
Wed Sep 16 17:00:07 1992 John Gilmore (
* (update-depend, update-alldeps): Split out of
setup-to-dist, for convenience in rebuilding the depend and
alldeps.mak files.
(assorted): Update to catch straggler files when building gdb.tar.Z.
Tue Sep 15 01:18:50 1992 John Gilmore (
Preliminary cleanup for splitting host/native/target.
* infptrace.c (child_resume): Don't deal with NO_SINGLE_STEP
here; it is dealt with at a gdb-target-independent level.
* rs6000-tdep.c (single_step): Don't call ptrace, we are a
high toned routine. Fix return type to void.
* tm-rs6000.h (AIX_BUGGY_PTRACE_CALL): Zap, we think we fixed it.
Rich and I believe the "real problem" was that both single_step
and target_resume were issuing PT_CONTINUE calls. This would
cause the second PT_CONTINUE to sometimes fail because the process
was already running.
* infptrace.c (child_resume): Remove AIX_BUGGY_PTRACE_CALL kludge.
Mon Sep 14 19:20:43 1992 Stu Grossman (grossman at
* energize.c (pty_to_kernel): Must check for EAGAIN as
termination condition.
(full_filename): Don't prepend dirname if filename begins with /.
(breakpoint_notify, kernel_dispatch): Deal with DynamicLoad
messages properly!!
(getpty (NCR)): Lotsa bug fixes...
(kernel_dispatch (case StopRType)): Use kill() instead of
killpg() so we can deal with losing systems...
(wait_for_events): Work around NCR select() lossage. It doesn't
zero out readfds when select() returns zero.
(energize_initialize): Use I_SETSIG to get SIGIO interrupts. Use
getcwd() instead of getwd() (NCR getwd() seg faults).
(energize_wait): Use sigaction() for NCR. Their version of signal()
is unreliable by default.
* procfs.c (proc_wait): Call print_sys_errmsg() if we get an
error from PIOCSWSTOP.
* breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c,
symfile.c, target.c, valprint.c: Use _filtered form of *printf.
defs.h, utils.c: Make vfprintf_filtered global.
* energize.c (send_location): New routine to consolidate all
places where we must notify kernel of where the given pc is.
(cplus_demangle): Put single-quotes around demangled names.
(energize_call_command): Call send_location() after doing up,
down, and frame commands.
Fri Sep 11 01:34:25 1992 John Gilmore (
* mipsread.c: Clean up some white space.
(parse_symbol): Handle stEnd of stFile.
(parse_partial_symbols): Remove old #if 0'd code. Handle stLocal.
* mips-xdep.c (REGISTER_PTRACE_ADDR, fetch_inferior_registers,
store_inferior_registers): Replace unexplained numbers
with manifest constants from a DECstation header file.
* xm-mips.h (KERNEL_U_ADDR): Get from <machine/param.h>.
(REGISTER_U_ADDR): Fix up for Ultrix 4.2.
* tm-tahoe.h, xm-tahoe.h (KERNEL_U_ADDR): Move macro to xm-tahoe.h.
* stack.c (_initialize_stack): "dow" should be a valid abbreviation
for "down". Suggested by Richard Stallman.
Thu Sep 10 15:26:07 1992 Ken Raeburn (
* remote-vx.c: Rename realloc for inclusion of rpc/rpc.h, to avoid
redeclaration bug on SunOS 4.
Wed Sep 9 17:36:53 1992 John Gilmore (
* i386-stub.c, sparc-stub.c (getpacket): Actually check checksums.
* m68k-stub.c: Remove a few extraneous ANSI-isms.
* remote-nindy.c (nindy_prepare_to_store): Only fetch regs if
they aren't already there.
* remote-vx.c (vx_prepare_to_store): Ditto.
* xcoffread.c: Surround forward struct defns with #ifdef __STDC__.
Wed Sep 9 16:50:22 1992 John Gilmore (
Removed a large number of changes inserted by Per Bothner
for C++ support. These will go back in when they've been
Tue Sep 8 21:05:18 1992 Stu Grossman (grossman at
* serial.h: Fix prototye for serial_raw().
* ser-bsd.c, ser-termios.c: Fix args for serial_open() &
serial_write() to match prototypes.
* remote-st2000.c (get_reg_name): Make *p be const.
Tue Sep 8 17:24:52 1992 Ken Raeburn (
* remote-nindy.c (nindy_fetch_registers): Make return type void,
to agree with target structure field type.
(nindy_store_registers): Ditto.
* Makefile (OPCODES): New var, pointing to opcodes library.
(CLIBS, CDEPS): Include it.
(saber_gdb): Load opcodes library.
Tue Sep 8 15:22:06 1992 Stu Grossman (grossman at
* a68v-xdep.c (store_inferior_registers): declare as void.
* infptrace.c: HP/Apollos have ptrace.h in the wrong place.
* remote-st2000.c: Massive changes to use new serial package.
Also added 'connect' command to transparantly connect to serial
* ser-termios.c: Big cleanup, use nicer coding conventions.
* ser-bsd.c: New module, serial stuff for BSD systems.
* serial.h: Define struct ttystate properly using HAVE_TERMIO.
* xm-apollo68b.h: #define PTRACE_IN_WRONG_PLACE...
Fri Sep 4 00:34:30 1992 Per Bothner (
* symfile.h: Declaration of set_demangling_style() moved
here from demangle.h (which is now in ../include).
* i386-xdep.c: Update comment.
Thu Sep 3 13:44:46 1992 K. Richard Pixley (
* symtab.c (completion_list_add_symbol): restructured to optimize
for time. First clip names that cannot match. Then clip any
names we've already considered. Drop a redundant strncpy. Drop
a redundant malloc and associated free for demangled names.
Thu Sep 3 09:17:05 1992 Stu Grossman (grossman at
* a68v-xdep.c (store_inferior_registers): Define as type void.
* Add host m68k-apollo*-bsd*.
* demangle.c (struct demanglers): Use enum instead of constant
value to keep braindamaged HP/Apollo compiler happy.
Wed Sep 2 20:45:31 1992 Per Bothner (
* utils.c (strcmp_iw): Add a hack to allow "FOO(ARGS)" to
match "FOO". This allows 'break Foo' to work when Foo is
a mangled C++ function. (See comment before function.)
Wed Sep 2 13:45:27 1992 John Gilmore (
* config/ (MH_CFLAGS): Circumvent IBM <rpc/rpc.h> bug,
for files in vx-share/*.c.
* xm-rs6000.h (fd_set): Circumvent the circumvention,
for normal GDB source files.
* (VERSION): Roll to 4.6.6.
* tm-vx68.h, tm-es1800.h: Use tm-68k.h rather than tm-sun3.h.
* tm-sun3.h: Remove STACK_END_ADDR, no longer used.
* tm-sun3os4.h: Update comments.
* xm-delta88.h: Remove STACK_END_ADDR.
Wed Sep 2 01:18:31 1992 John Gilmore (
* (VERSION): Roll to 4.6.5.
* infrun.c: Lint for recent `handle' changes.
* ser-termios.c, ser-go32.c: Remove DEFUN crap, clean up.
* serial.h (EXFUN): Remove all uses, convert to PARAMS.
* config/ Include ser-termios.o. FIXME, all .mh files
should include a ser-XXX.o module.
* dbxread.c (elfstab_build_psymtabs): Remove DEFUN crap.
* defs.h, i960-pinsn.c, remote-hms.c: Replace CONST with simple const.
* Map unrecognized sun 68k's, sun sparcs, into
known suns in, rather than mapping them to unique
config files that happen to duplicate other config files.
* config/sun3.{mh,mt}: Remove (use identical sun3os4.*).
* config/sun4.{mh,mt}: Remove (use identical sun4os4.*).
Wed Sep 2 00:10:43 1992 John Gilmore (
* (*-*-sunos*): Use trailing * to match all
sub-variants of SunOS, e.g. sunos4* to match sunos4.1.1.
(sparc-*-sunos3): Remove host & target. Sunos3 never shipped
in production on Sun-4.
({a29k,i[34]86,i960}-*-elf): Add targets, equivalent to coff.
(m68k-*-{aout,coff,elf}): Add targets, w/new config and tm files.
(sparc-*-{aout,coff,elf}): Add targets, w/new config and tm files.
* config/, config/, config/,
config/ New target configs for embedded.
* config/sun4os3.{mh,mt}: Remove, never existed in production.
* tm-68k-un.h, tm-68k-noun.h, tm-spc-un.h, tm-spc-noun.h: New
target definitions for embedded with and without underlines on
* tm-sparc.h, tm-sun2.h, tm-sun3.h: Delete NAMES_HAVE_UNDERSCORE:
not a parameter of the CPU, but of the development environment.
* tm-es1800.h, tm-sunos.h, tm-vx68.h: Add NAMES_HAVE_UNDERSCORE.
Tue Sep 1 17:31:45 1992 John Gilmore (
* breakpoint.c (breakpoint_re_set): Avoid setting source symtab
(which involves reading in main's symtab) if we have no breakpoints.
Mon Aug 31 13:47:45 1992 Fred Fish (
* dwarfread.c (cu_language): New local variable to record
language for current compilation unit being processed.
* dwarfread.c (set_cu_language): New local function to decode
and record language for current compilation unit being processed.
* dwarfread.c (synthesize_typedef): Add local function to
synthesize a typedef for C++ classes, structs, unions, and
* dwarfread.c (read_structure_scope): Synthesize typedefs
for C++ classes, structs and unions.
* dwarfread.c (read_enumeration): Synthesize typedefs for
C++ enumerations.
* dwarfread.c (read_file_scope): Call set_cu_language to
record language for current compilation unit. After symtab
is built, save this recorded language.
* dwarfread.c (process_dies, add_partial_symbol, struct_type,
scan_partial_symbols, new_symbol): Recognize TAG_class_type.
* dwarfread.c (add_partial_symbol): Synthesize partial symbol
typedefs for C++ classes, structs, unions, and enumerations.
* dwarfread.c (scan_compilation_units): Call set_cu_language
to record language for current compilation unit.
* dwarfread.c (scan_partial_symbols): Call add_enum_psymbol here
for TAG_enumeration_types, rather than in add_partial_symbol.
* dwarfread.c (add_partial_symbol): Combine TAG_enumeration_type
case with class, struct, and union type cases, now that they are
the same. Remove tests for non-NULL name attributes, now done
by callers.
* gdbtypes.h (TYPE_CODE_CLASS): Add type for C++ classes, but
treat as alias for TYPE_CODE_STRUCT for now.
Sun Aug 30 21:32:17 1992 Ian Lance Taylor (
* map "gdb" through program_transform_name when
Sun Aug 30 21:18:51 1992 Fred Fish (
* {i386-tdep.c, m68k-tdep.c, mips-tdep.c, sparc-tdep.c}
(supply_gregset, fill_gregset, supply_fpregset, fill_fpregset):
Use "regi" for local indexing through register numbers, reserving
"regno" for the name of a specific register passed as an input
parameter. Fix bug propagated through all versions that sometimes
used regno as an index when it should have been regi, thus using
-1 as an index in some cases.
Sun Aug 30 18:15:17 1992 Per Bothner (
* cplus-dem.c, demangle.h: Moved to ../libiberty and ../include,
respectively, so same demangler can be used by other programs.
* Remove demangler stuff.
* (depend): Pass -I../readline (needed for main.c).
* demangle.c (_initialize_demangler): Tell demangler which
CPLUS_MARKER to assume.
Fri Aug 28 13:13:33 1992 John Gilmore (
RS/6000 portability changes (for hosting cross-debuggers).
* breakpoint.c (fixup_breakpoints): Re-kludge to IBM6000_TARGET.
* buildsym.c, rs6000-xdep.c, rs6000-tdep.c, tm-rs6000.h,
xcoffexec.c, xcoffread.c: Rename aixcoff to xcoff everywhere.
* printcmd.c (print_frame_args): Remove an RS/6000 dependency.
* stabsread.c (define_symbol): Remove RS/6000 dependencies.
* tm-rs6000.h (ATTACH_DETACH): Remove: host-dependent.
(NO_SINGLE_STEP): Add, target-dependent.
(loadinfotextindex): Lowercase, remove "aix_".
* xm-rs6000.h: Add <sys/ptrace.h> for infptrace.c.
(NO_SINGLE_STEP): Remove, target-dependent.
* xcoffexec.c (vmap_symtab): Cleanup #if 0'd code.
* xcoffread.c: Only build file if RS/6000 native GDB.
(build_function_symbol): Remove #if 0'd code.
* rs6000-tdep.c: Cleanup. Add static fn protos.
Use CORE_ADDR for addresses throughout. Make void fns void.
(pop_dummy_frame): Add FIXME about bogosity of design here.
(rs6000_struct_return_address): Ditto.
(frameless_function_invocation, frame_get_cache_fsr,
frame_initial_stack_address, xcoff_relocate_symtab,
xcoff_init_loadinfo, free_loadinfo, xcoff_add_toc_to_loadinfo,
add_text_to_loadinfo, find_toc_address): Move from xdep file.
Use CORE_ADDRs. Change identifiers to lowercase.
* rs6000-xdep.c: Make whole file conditional on native RS/6000,
supplying dummy routines if non-native. Add prototype for
static exec_one_dummy_insn. Move a mess of functions to
rs6000-tdep.c (as above). Remove #if 0'd code.
* config/ (XDEPFILES): Move xcoffexec.o to target side.
(XM_CLIBS): Add -lm to circumvent AIX 3.2 libc ldexp bug.
* config/ (TDEPFILES): Adopt xcoffexec.o.
* gdbtypes.h (TYPE_ALLOC): Parenthesize result to avoid problems
for callers.
* vx-share/README, nindy-share/README: New files describing
how these directories' code is shared, and with whom.
Thu Aug 27 20:04:56 1992 John Gilmore (
* (target configurations): Reformat into table.
Remove unsupp. Amigados host and target. Ditto Mach 386 target.
* tm-altosgas.h, tm-i386v-g.h: Remove ancient coff encap configs.
* config/{,,}: Ditto.
* config/{,}: Remove; identical to
* config/{,}: Remove; they only printed error msgs.
* config/ Remove useless MT_CFLAGS setting.
* config/ Use tm-i386v.h, not tm-i386v-g.h.
* (config-check): Add command to check whether is consistent with config/*.
Wed Aug 26 21:10:52 1992 John Gilmore (
* (host configurations): Reformat nested cases into
easy-to-maintain table.
(m68k-altos-*, i386v*): We don't care whether coff encap is used.
config/{,,}: Remove.
Wed Aug 26 16:02:01 1992 Fred Fish (
* cplus-dem.c: Reorder args to most local functions to make them
follow the consistent pattern of struct work_stuff pointer first,
followed by pointer into string being demangled, followed by
pointer to the string where the result is being stored, followed
by other args. Also generally replace most variables of name
"type" with "mangled" for consistency. They all pointed to the
same string but half were one name and half the other.
* cplus-dem.c (LONGERNAMES): Remove #ifndef's.
* cplus-dem.c (demangle_qualified): Rewrite to clean up and allow
use whenever a qualified name is being demangled.
* cplus-dem.c (do_type): Qualified names are treated similarly
to fundamental types, not as modifiers of fundamental types.
Mon Aug 24 20:44:38 1992 Stu Grossman (grossman at
* Add sparclite as a target.
* sparc-stub.c (handle_exception): Flush instruction cache just
before returning to the user. (hexToInt): Fix overzealous cleanup.
Mon Aug 24 11:57:13 1992 Fred Fish (
* infrun.c (handle_command): Rewrite to allow multiple signal
numbers, signal number ranges, and to recognize "all" to mean all
signals except those used by the debugger.
* infrun.c (SET_SIGS, UNSET_SIGS): Macros used in handle_command
to set or reset actions for specific signals.
Sun Aug 23 17:10:07 1992 Fred Fish (
* coffread.c (decode_type): Call alloc_type to alloc new
* stabsread.c (read_array_type, read_range_type, define_symbol):
Call alloc_type to alloc new types.
* stabsread.c (define_symbol): Move dbl_valu symbol field data
from type_obstack to symbol_obstack.
* stabsread.c (define_symbol): Move typedef_sym from type_obstack
to symbol_obstack.
* gdbtypes.h (TYPE_ALLOC): New macro to allocate space for data
associated with a type, using the same mechanism as was used to
allocate space for the type structure itself.
* coffread.c (patch_type, coff_read_struct_type,
coff_read_enum_type): Use TYPE_ALLOC.
* dwarfread.c (struct_type): Use TYPE_ALLOC.
* gdbtypes.c (create_array_type, check_stub_method,
allocate_cplus_struct_type): Use TYPE_ALLOC.
* mipsread.c (parse_symbol, parse_type): Use TYPE_ALLOC.
* stabsread.c (read_struct_type, read_array_type, read_enum_type,
read_range_type): Use TYPE_ALLOC.
Sun Aug 23 11:04:08 1992 Fred Fish (
* breakpoint.c (breakpoint_re_set): Select a default source
symtab if one is not currently selected.
* utils.c (query): Call wrap_here before building the output
query string, to turn off wrapping and flush any buffered output.
Otherwise our query may end up in the wrap buffer and never be
seen by the user.
* eval.c (evaluate_subexp): Report error when attempting to
evaluate subscript for types without a target type, rather
than dumping core by using the NULL pointer.
* symfile.c (symbol_file_command): Forget current_source_symtab
and current_source_line when discarding symbol table.
Sat Aug 22 22:33:20 1992 John Gilmore (
Bug fixes from Andrew Heybey <>.
* tm-mips.h (REGISTER_VIRTUAL_TYPE): Float regs are float type.
* mips-tdep.c (mips_print_register): Alloc enough space for two regs.
Fri Aug 21 15:17:03 1992 Stu Grossman (grossman at
* remote.c (remote_open): Fix baud rate setting to make -b flag
work. (remote_wait): Change 'T' message parser to deal with new
improved format which allows stub to send an arbitrary bunch of
* sparc-stub.c: General cleanups. (trap_low, handle_exception):
make all this re-entrant by storing all state on the stack. Clean
up memory error trapping. (computeSignal, set_debug_traps):
make it all table driven. Make a start at a baud rate setting command.
Wed Aug 19 10:23:27 1992 Ian Lance Taylor (
* m68k-pinsn.c: handle new operand type 'r', introduced for cas2.
* remote-vx.c: redefine malloc to avoid buggy declaration on
RS/6000 <rpc/types.h>.
xm-rs6000.h: include <sys/select.h> to define fd_set for
<rpc/svc.h> on RS/6000.
Tue Aug 18 14:48:24 1992 Ian Lance Taylor (
* added FLAGS_TO_PASS variable, and passed it to
recursive invocations of make. Always create installation
Mon Aug 17 18:29:58 1992 Per Bothner (
* m68k-pinsn.c: Minor fix in style of output (don't use
range to indicate floating point control registers).
Sat Aug 15 02:58:03 1992 John Gilmore (
* m68k-pinsn.c: Surround extended support with #ifdef HAVE_68881.
* infcmd.c (registers_info): Handle multiple register names.
Changes inspired by Roland McGrath.
Sat Aug 15 02:28:52 1992 Stu Grossman (grossman at
* sparc-stub.c: New file. Mix it with your SPARClite
application, and it will speak GDB remote protocol!
* remote.c (remote_wait): Change 'T' (expedited reply) message to
deal with arbitrary registers. Needed for sparc-stub.
Fri Aug 14 12:11:25 1992 Fred Fish (
* cplus-dem.c (cplus_markers): Add table for gnu style and
use throughout, in place of compile time constant CPLUS_MARKER.
* cplus-dem.c (cfront_special): New function, as suggested
* cplus-dem.c (forget_types): New function.
* cplus-dem.c (cplus_demangle): Call gnu_special, moved from
* cplus-dem.c (mop_up): Call forget_types().
Use throughout, instead of checking current_demangling_style.
* cplus-dem.c (demangle_signature): When finding an explicit
start of function args, forget all remembered types for
lucid/cfront style demangling.
* cplus-dem.c (demangle_prefix): In a sequence of two or more
underbar characters, use last pair as the delimiter. Hoist
gnu_special() call up to cplus_demangle(). Call cfront_special()
when appropriate.
* cplus-dem.c (cplus_special): Fix virtual table name demangling
for inherited classes.
* cplus-dem.c (demangle_args): Document quirks of numbered
references to previously seen types.
* dbxread.c (read_ofile_symtab, process_one_symbol):
Use AUTO_DEMANGLING rather than explicitly checking
* demangle.h: Add some comments.
* dwarfread.c (LCC_PRODUCER): Remove trailing space, which is
not found in the actual producer string produced by lcc.
* dwarfread.c (handle_producer): Use AUTO_DEMANGLING rather
than explicitly checking current_demangling_style.
Thu Aug 13 11:54:46 1992 John Gilmore (gnu at
* breakpoint.c (enable_longjmp_breakpoint,
disable_longjmp_breakpoint, set_longjmp_resume_breakpoint):
Check for duplicate breakpoints at the same address. Bug report
and preliminary fix from Dave Morrison, <>.
Wed Aug 12 11:14:58 1992 Fred Fish (
* buildsym.c (end_symtab): Document that end_symtab can return
NULL under non-error conditions.
* dwarfread.c (read_file_scope): Guard against dereferencing NULL
returned from end_symtab for empty compilation units.
Tue Aug 11 02:49:39 1992 John Gilmore (gnu at
* am29k-tdep.c: Lint from DECstation compiler.
* mem-break.c: Restore test of BREAKPOINT size that Fred removed.
As the man page says, "Sometimes you just can't get lint to shut
up". That doesn't mean you should blow away the code it won't
shut up about.
* mips-xdep.c: Revise stubbing-out of code until Rich cleans
it up over the next few weeks. Make mips x 29k build.
* tm-29k.h (CALL_DUMMY): Make it work on cross-endian hosts.
(FIX_CALL_DUMMY): Comment in the patching of the breakpoint,
but leave it as a comment because the breakpoint instruction
is not easily accessible at this moment (it's static, and if
we define one here, it goes into every file compiled).
Mon Aug 10 22:27:19 1992 Fred Fish (
* (VERSION): Bump to 4.6.3.
* dwarfread.c (scan_partial_symbols): Skip over DIE's within
function scopes when building partial symbol tables.
* objfiles.c (open_existing_mapped_file): Make it clear in
warning message that out of date mapped files are ignored.
* symtab.c (lookup_symtab_1, lookup_symbol): Print compilation
unit source file name in error message.
Sat Aug 8 23:12:22 1992 Fred Fish (
* dwarfread.c (struct dieinfo): Add has_at_byte_size.
* dwarfread.c (struct_type): In absence of AT_byte_size for
bitfield, use size of object of member's type for the size of
the anonymous object containing the bit field.
* dwarfread.c (completedieinfo): Set has_at_byte_size when
an AT_byte_size attribute is seen.
* mipsread.c (psymtab_to_symtab_1): Fix misspelled cast to
union aux_ext (was aux_ent).
* i386-pinsn.c (print_insn): Cast 2'nd arg to read_memory from
unsigned char* to char*, for Lucid compiler.
* i386-tdep.c (codestream_fill): Fix cast of 2'nd arg to read_memory
to be correct type (from unsigned char* to char*).
* valprint.c (type_print_derivation_info): Minor tweak to placement
of commas in derived class printing.
* xcoffread.c (builtin_type): Fix misspelling in fatal message.
Fri Aug 7 11:18:23 1992 Steve Chamberlain (
* xm-go32.h: Define LSEEK_NOT_LINEAR
* source.c (find_source_lines): if LSEEK_NOT_LINEAR is defined
then work out the lseek positions of newlines by running through
the file and `tell'ing. This makes source file listing work on
OS's where the relationship between physical position in file and
canonical position is indeterminate, eg VMS and DOS.
Thu Aug 6 10:56:01 1992 Fred Fish (
* stabsread.c: Ensure that all members of all allocated structures
are initialized to known state to avoid hard to find bugs with gdb
using fields containing random data.
* buildsym.c (start_subfile): Compact dirname initialization.
* buildsym.c (patch_subfile_names): New function.
* buildsym.c (end_symtab): Make copy of dirname on symbol obstack.
* buildsym.c (end_symtab): Free all malloc'd subfile fields.
* buildsym.h (patch_subfile_names): Add prototype.
* dbxread.c (process_one_symbol): Call patch_subfile_names.
Wed Aug 5 01:42:40 1992 John Gilmore (gnu at
* remote-udi.c: Update comments.
* remote.c (getpkt): Only force retransmission ten times;
after that, assume bug in target code, and handle pkt anyway.
Mon Aug 3 17:06:20 1992 Stu Grossman (grossman at
* Add support for apollo 68k under BSD environment.
* xm-apollo68b.h: New file to support above.
Mon Aug 3 00:25:56 1992 Fred Fish (
* Recognize i486 host cpu.
* valprint.c (type_print_derivation_info): Print derivation info
in same form as class declarations in source.
* valprint.c (type_print_varspec_suffix): Split arg printing
code out to type_print_args function.
Sat Aug 1 13:32:58 1992 Fred Fish (
* dwarfread.c (struct dieinfo): Remove obsolete at_visibility,
at_import, at_frame_base.
* dwarfread.c (completedieinfo): Remove cases for obsolete
AT_visibility, AT_import, and AT_frame_base attributes.
* breakpoint.h (BREAKPOINT_MAX): Increase from 10 to 16 for
i860, which can keep up to 4 shadow breakpoints.
* tm-stratus.h (USG): Define.
* tm-stratus.h (TARGET_BYTE_ORDER): Define to BIG_ENDIAN.
* xm-stratus.h (HOST_BYTE_ORDER): Define to BIG_ENDIAN.
* xm-stratus.h (xm-sysv4.h): Include, name changed from xm-svr4.h.
* xm-stratus.h (NO_JOB_CONTROL): Remove define.
* config/ (TDEPFILES): Include files available from
stratus that are not yet in release pending receipt of paperwork
at FSF.
* buildsym.c (finish_block): Minor code format change.
* gdbtypes.h (struct field): Add to comments.
* gdbtypes.h (virtual_field_bits): Add to comments.
* objfiles.c (allocate_objfile): Change obstack interface to
match FSF merging efforts.
Mon Jul 27 21:14:44 1992 Fred Fish (
* (VERSION): Bump to 4.6.2.
* (SFILES_MAINDIR): Add stabsread.c
* (OBS): Add stabsread.o
* (stabsread.o): Add build rule.
* stabsread.c, stabsread.h: New files.
* buildsym.c: Split out stabs specific support to stabsread.c.
* buildsym.h: Split out stabs specific support to stabsread.h.
* dbxread.c (stabsread.h): Include
* dbxread.c (dbx_new_init): Call stabsread_new_init.
* dbxread.c (dbx_psymtab_to_symtab_1): Call stabsread_init.
* dbxread.c (read_ofile_symtab): Call end_stabs.
* dbxread.c (process_one_symbol): Call end_stabs and start_stabs.
* dbxread.c (elfstab_build_psymtabs): Call stabsread_new_init.
* dwarfread.c (psymtab_to_symtab_1): Call buildsym_init, add
really_free_pendings to cleanups.
* elfread.c (elf_new_init): Call stabsread_new_init.
* gdbtypes.c: Small changes to maintenance commands.
* mipsread.c (stabsread.h): Include.
* mipsread.c (psymtab_to_symtab_1): Call end_stabs.
* xcoffread.c (stabsread.h): Include.
* xcoffread.c (global_stabs): Remove redundant def.
* xcoffread.c (read_xcoff_symtab): Call start_stabs and end_stabs.
Wed Jul 22 21:39:33 1992 Fred Fish (
* lmode_inferior_valid, lmode_ours_valid: New static vars.
* inflow.c (terminal_init_inferior, terminal_inferior,
terminal_ours_1, initialize_inflow): Record and use state
of lmode_inferior_valid and lmode_ours_valid.
Wed Jul 22 04:23:03 1992 D. V. Henkel-Wallace (
* es1800.c: use FREAD|FWRITE rather than _FREAD|_FWRITE.
include <sgtty.h> on USG. (from sef).
* depend: es1800 dependency needed here.
Mon Jul 20 21:09:53 1992 Fred Fish (
* buildsym.c (read_struct_type): Initialize structs allocated
with alloca, to avoid using random values from stack later on.
* defs.h (fprintf_filtered): Add prototype.
* gdbtypes.c (check_stub_method): Fix misleading comments.
* gdbtypes.c (print_arg_types, dump_fn_fieldlists): New maint
support functions.
* gdbtypes.c (print_cplus_stuff, recursive_dump_type): Many
small changes to maint support functions.
* gdbtypes.h (cplus_struct_type): Reorganize member ordering
for some fields and expand comments.
* objfiles.c (allocate_objfile): Use new obstack_alloc_arg
macro and track change to obstack_full_begin macro.
* utils.c (fprintfi_filtered): New function.
* valprint.c (type_print_base): Fixup field printing to not
print extraneous lines and not print bogus "no data fields"
messages for C++ classes with no data members. Also use new
fprintfi_filtered function.
Mon Jul 20 11:25:18 1992 D. V. Henkel-Wallace (
* es1800 ok for 68000 too.
Sat Jul 18 15:48:58 1992 david d `zoo' zuhn (zoo at
* echo error messages to stderr, not stdout
Fri Jul 17 17:07:24 1992 david d `zoo' zuhn (zoo at
* recognize hppa* instead of hppa
Fri Jul 17 16:52:04 1992 Stu Grossman (grossman at
* energize.c: Second cut at DynamicLoad message handling.
* energize.c: Relativize pathnames in #include statements.
* (kernel_dispatch): Better error messages for unknown protocol
* (kernel_dispatch): First cut at DynamicLoad message handling.
* Remove -I../readline from all compilations,
include a special case for main.o instead.
Fri Jul 17 10:14:56 1992 Fred Fish (
* eval.c (evaluate_subexp): Ask lookup_struct_elt_type to call
error if it fails to find a member type, rather than return NULL
and trigger a coredump.
* symtab.c (lookup_symbol, lookup_demangled_block_symbol,
lookup_demangled_partial_symbol,): Ask demangle_and_match to
match on complete demanglings, including argument lists for member
functions, rather than just accepting the first demangling that
matches the class and function name.
* dwarfread.c (read_file_scope): Pass contents of AT_comp_dir
to start_symtab as the directory name.
* dwarfread.c (completedieinfo): Strip off any leading hostname
portion of the AT_comp_dir attribute string. Gdb doesn't know
what to do with them (FIXME).
Thu Jul 16 13:37:09 1992 Stu Grossman (grossman at
* breakpoint.c (commands_command): Simplify code a bit, remove
unnecessary fflush().
* (OTHERS): Add gcc.patch.
* partial-stab.h (N_SO): Fix handling of redundant SOs (again...)
Thu Jul 16 12:07:40 1992 Fred Fish (
* dwarfread.c (LCC_PRODUCER): Change to match current NCR
lcc producer string.
Thu Jul 16 11:40:55 1992 Stu Grossman (grossman at
* WHATS.NEW renamed to NEWS.
Wed Jul 15 11:37:31 1992 Fred Fish (
* dbxread.c, dwarfread.c: Re-enable experimental code to
automatically select demangling style.
* demangle.c (DEFAULT_DEMANGLING_STYLE): Rename from simply
DEMANGLING_STYLE, to make more descriptive. Revert back to
"auto" as default. Comment use.
* (${DEMANGLER}.o) Remove target and special
compilation rule.
Tue Jul 14 23:05:14 1992 Fred Fish (
* (VERSION): Bump to 4.6.1 (post-release versions).
Tue Jul 14 19:26:54 1992 Stu Grossman (grossman at
*, demangle.c: Change default demangling style to
* Update version to 4.6 !!!
* README, WHATS.NEW: Update for 4.6.
Tue Jul 14 16:59:46 1992 Ken Raeburn (
* i960-tdep.c (frame_args_address): If arg pointer can't be found,
use frame address.
* buildsym.c (read_struct_type): Don't die on TYPE_CODE_UNDEF
nodes as base classes.
Tue Jul 14 00:12:30 1992 Stu Grossman (grossman at
* alldeps.mak, depend: Update.
* xcoffread.c: Add decl for section_offset to keep prototype happy.
* (VERSION): 4.5.9.
* xm-hp300bsd.h: Add decl for strdup().
* mips-tdep.c (heuristic_proc_desc): Fill in proc start addr in
PDR. Cleanup a few things, fix compilation warnings.
Mon Jul 13 19:06:54 1992 Fred Fish (
* (DEMANGLING_STYLE): New define to set default
demangling style for C++. Defaults to "auto".
* (SFILES_MAINDIR): Add demangle.c
* (OBS): Add demangle.o
Remove compile time decisions about demangling style and replace
with runtime decisions using current_demangling_style.
* cplus-dem.c (main): Expand code included during building of
standalone demangler to recognize demangling style options.
* dbxread.c (demangle.h): Include.
* dbxread.c (read_ofile_symtab, process_one_symbol): Set GNU C++
demangling style if processing g++ code and current demangling style
is auto (Note: this feature currently disabled.)
* demangle.c: New file, generic demangling control.
* demangle.h (demangling_styles): New enumeration to select one
of several demangling styles. Also define string names for each
* demangle.h (set_demangling_style): Add prototype.
* dwarfread.c (demangle.h): Include.
New producer string prefixes to recognize.
* dwarfread.c (handle_producer): Consolidate actions for specific
producers. Set demangling style based on producer string if
current style is auto. (Note: this feature currently disabled.)
* config/ (DEMANGLE_OPTS): Remove.
Sat Jul 11 18:23:58 1992 John Gilmore (gnu at
* config/ Remove -xs flag, default INSTALL to cp.
Fri Jul 10 13:58:34 1992 Per Bothner (
* gdbtypes.c, gdbtypes.h: New function lookup_signed_typename.
* c-exp.y: Call lookup_signed_typename() after seeing
"signed". This handles "signed char" correctly.
* c-exp.y: Recognize (but ignore) 'const' and 'volatile'
keywords before a type specifier.
Fri Jul 10 10:19:52 1992 Fred Fish (
* command.c (lookup_cmd_1): Clarify descriptive comments.
* gdbcmd.h (maintenanceprintlist): Add declaration.
* main.c (maintenanceprintlist): Add definition.
* main.c (gdb_completer_command_word_break_characters): Add.
* main.c (symbol_completion_function): Switch completer word
break character sets dynamically, based on whether completion is
being done on commands or on something else.
* main.c (initialize_cmd_lists): Init maintenanceprintlist.
* maint.c: Include demangle.h.
* maint.c (maintenance_demangle): New function.
* maint.c (maintenance_print_command): New function.
* maint.c (_initialize_maint_cmds): Reorganize some commands
under new maintenance print subcommand.
Thu Jul 9 19:05:27 1992 Per Bothner (
* gdbtypes.c (lookup_struct_elt_type): If the input type is
TYPE_CODE_PTR or TYPE_CODE_REF, dereference it to get the
target type. Otherwise, 'whatis this.field' wouldn't work,
which would be inconsistent, since 'print this.field' works.
* buildsym.c (read_struct_type, read_enum_type): Clear
* buildsym.c (cleanup_undefined_types): Don't rely on a
flawed "Reasonable test to see if" a type has been defined
since it was referred to; now we can just see if the
TYPE_FLAG_STUB flag has been cleared.
* valprint.c (print_type_base): Emit public/protected/private
labels for methods as well as fields. Also, indent these labels
2 spaces instead of 4, for a more conventional "look".
* symtab.c (gdb_mangle_name): Undo Fred's change, unless
GCC_MANGLE_BUG is defined. Also, handle destructors specially.
* gcc.patch: New file. Contains patch for gcc (so people
with gdb-2.2.x won't have to wait for a new gcc release).
Thu Jul 9 18:44:26 1992 Ken Raeburn (
* i960-pinsn.c (mem): Variables reg[123] should point to CONST.
(print_addr): Call print_address to show symbolic version as well.
* remote-vx.c (vx_kill): Don't look for arguments; they aren't
being passed.
(vx_read_register): Declare inferior_fp_regs. Delete code for
copying "inferior_registers" around; the values are already in var
"registers". Use correct size for register set.
* remote-vx.c (vx_write_register): Don't try writing FP regs; the
target doesn't support it.
(vx_read_register): Don't try reading them either.
* tm-i960.h (IP_REGNUM): Move to end of non-FP list, since the
VxWorks back end reads them in one contiguous set except for this
(register_names): Change "pc" to "pcw" to avoid confusion printing
* tm-vx960.h (PC_REGNUM): Use RIP_REGNUM, since that's where we
find the PC under VxWorks.
Wed Jul 8 21:34:30 1992 Fred Fish (
* dwarfread.c (alloc_utype, decode_subscr_data): Call alloc_type
to create new blank types, instead of handcrafting them.
* defs.h (printfi_filtered): Add prototype.
* utils.c (printfi_filtered): New function.
* gdbtypes.c (recursive_dump_type): Use printfi_filtered to
to simplify the code. Other cleanups.
* gdbtypes.c (check_stub_method): Demangle using DMGL_ANSI.
* gdbtypes.h (struct cplus_struct_type): Add comments describing
use of various fields.
* gdbtypes.c (print_bit_vector, print_cplus_stuff): New functions.
* c-exp.y (%token): Add CLASS as a token for C++, add grammar
production that currently treats it exactly the same as STRUCT.
* c-exp.y (yylex): Recognize "class" as token CLASS.
* symtab.c (gdb_mangle_name): Rewrite to match current g++ stabs.
* symtab.c (decode_line_1): Fix to pass quoted args on down to
general symbol handling code. Call cplus_mangle_opname with
* symtab.c (decode_line_2): Print demangled function names in
breakpoint menus, instead of just file and line number.
* symtab.c (name_match): Call cplus_demangle with DMGL_ANSI.
* valprint.c (type_print_base): Print "class" for C++ classes,
rather than "struct". Print section labels for public, protected
and private members of C++ classes.
* values.c: Include demangle.h.
* values.c (value_headof): Call cplus_demangle with DMGL_ANSI.
Wed Jul 8 17:23:07 1992 Stu Grossman (grossman at
* (VERSION): Update to 4.5.8.
Wed Jul 8 00:11:02 1992 Stu Grossman (grossman at
* dbxread.c (dbx_symfile_init): Init stab_section_info to NULL to
prevent crashes when examining cross-targets.
* dbxread.c (process_one_symbol): Include directory name when
calling start_subfile for SOL & BINCL symbols. This allows gdb to
find include files, and yacc/lex sources when the cwd doesn't match
that in which the object was compiled.
* objfiles.h (ALL_MSYMBOLS): Don't seg fault when there are no
* symtab.c (lookup_symtab_1): Rewrite. It now handles include
Tue Jul 7 09:00:42 1992 Fred Fish (
* maint.c (maintenance_command, maintenance_info_command):
Install with allow_unknown as 0 and call help_list to show
list of possibilities when no subcommand is specified.
Tue Jul 7 00:20:29 1992 Fred Fish (
* Add m68k-ericsson-*.
* remote-es1800.c, tm-es1800.h, config/ New files.
Sun Jul 5 17:17:16 1992 Fred Fish (
* maint.c: New file.
* (SFILES_MAINDIR): Add new file maint.c.
* (OBS): Add new file maint.o.
* defs.h (command_class): Add class_maintenance.
* defs.h (MAINTENANCE_CMDS): Default to including maintenance
commands. Allow for them (and other nonessential parts of gdb)
to be selectively left out under special circumstances.
* gdbtypes.c (recursive_dump_type): New function; supports
maintenance print-type command.
* gdbtypes.h (recursive_dump_type, maintenance_print_type):
Add prototypes.
* main.c (maintenancelist, maintenanceinfolist): Add maintenance
command lists.
* main.c (initialize_cmd_lists): Eliminate unnecessary casts on
initializers. Add initializations for setprintlist, showprintlist,
setchecklist, showchecklist, maintenancelist, and maintenanceinfolist.
* printcmd.c (maintenance_print_type): New maintenance cmd.
* valprint.c (setprintlist, showprintlist): Move to main.c, as
implied by comment that all cmd lists are owned by main.c.
* infcmd.c (unsetlist): Move to main.c, as implied by comment
that all cmd lists are owned by main.c.
* language.c (setchecklist, showchecklist): Move to main.c, as
implied by comment that all cmd lists are owned by main.c
* breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist,
deletelist): Remove redundant declarations (also in gdbcmd.h).
* symmisc.c (printsyms_command): Now maintenance_print_symbols.
* symmisc.c (printmsyms_command): Now maintenance_print_msymbols.
* symmisc.c (printpsyms_command): Now maintenance_print_psymbols.
* symmisc.c (printobjfiles_command): Now maintenance_print_objfiles.
* symtab.h (maintenance_print_symbols, maintenance_print_psymbols,
maintenance_print_msymbols, maintenance_print_objfiles):
Add prototypes.
* symmisc.c (printsyms_command, printpsyms_command,
printmsyms_command, printobjfiles_command): Removed from
* main.c (dump_me_command): Moved to maint.c and renamed to
* breakpoint.c (all_breakpoints_info): Rename to
* breakpoint.c (_initialize_breakpoint): Convert add_info of
all_breakpoints_info to add maintenance_info_breakpoints to the
maintenanceinfolist instead.
main.c (initialize_main): Set up maintenance class commands.
Sun Jul 5 11:03:53 1992 Stu Grossman (grossman at
* energize-patches: Fix minor problems with building energize lib.
* energize-patches: Change names of all cadillac procedure calls
to be energize procedure calls. Simplify many hooks by moving
tests energize.c. Configure energize, and build it automatically now.
Sun Jul 5 09:43:28 1992 Fred Fish (
* (VERSION): Bump to 4.5.7.
* cplus-dem.c (demangle_args): Validate index for previously
seen type to guard against bogus values from malformed manglings.
* valops.c (value_struct_elt_for_reference): Guard against
blindly using NULL return value from lookup_symbol.
Sun Jul 5 09:46:43 1992 Stu Grossman (grossman at
* cadillac.c, cadillac-patches: Rename to energize.c and
energize-patches. Change all routines and variables named
'cadillac*' to 'energize*'. Create new file called energize.h to
hold all interface declarations.
* deblib/connection/*: Move all of this stuff into energize/, but
delete unneeded files.
Sun Jul 5 03:06:39 1992 John Gilmore (gnu at
* tm-sysv4.h (NAMES_HAVE_UNDERSCORE): SVR4 systems don't.
* buildsym.c (finish_block): Fix thinko `inner block' complaints.
* dbxread.c (process_one_symbol): Parse N_OPT "gcc2_compiled.".
* procfs.c (proc_set_exec_trap): Set run-on-last-close flag on
child processes, to avoid dead ones "hanging around" after GDB exits.
(attach): Always stop the process if it needs it. Set RLC flag
when attaching running processes, so it will continue if we detach
it, quit, or are killed.
(detach): Clear faults and set RLC flag to make process run
when we close it.
(open_proc_file): New `mode' argument for O_RDONLY or O_RDWR.
Callers changed.
(info_proc): Open process O_RDONLY, so we can see any process,
even those controlled by debuggers.
* tm-sun4sol2.h (SUN_FIXED_LBRAC_BUG): They did (in Sol 2).
Sat Jul 4 03:43:38 1992 John Gilmore (gnu at
Relocate symbols using an array of section_offsets, rather than a
single `addr' or `offset'. This makes Solaris-2 support work, and
permits better VxWorks (and maybe xcoff) support later.
* symtab.h (struct section_offsets): New structure for keeping
a set of offsets, rather than a single one.
(struct objfile): Replace addr with section_offsets member.
* symfile.h: Add sym_offsets to struct sym_fns. Conforming changes.
* gdb-stabs.h: New include file with `symbol type specific'
parameters for psymtabs and objfiles.
* (HFILES): Add gdb-stabs.h.
* buildsym.h (start_psymtab, process_one_symbol): Fix prototypes.
* coffread.c: Conforming changes. Fake offset array always 0.
* dbxread.c: Conforming changes.
(struct dbx_symfile_info): Move to gdb-stabs.h.
(start_psymtab): Call elfstab_offset_sections to calculate good
offsets for this source file, based on the ELF symbol table info.
(read_ofile_symtab): Yank N_CATCH, which is dead.
(process_one_symbol, N_CATCH): Yank.
Relocate with SECT_OFF_TEXT.
(", N_STSYM, N_LCSYM, N_ROSYM): Grope around in the stab string
to distinguish relocatable from absolute symbols. Then, if not
absolute, do:
(elfstab_build_psymtabs): Caller has allocated dbx_symfile_info.
(dbx_symfile_offsets): Add to translate addr to offset.
* dwarfread.c: Conforming changes. Single offset currently used.
* elfread.c: Add various complaints about elf/stab stuff.
#include gdb-stabs.h. Conforming changes, using a single offset.
(elf_symtab_read): Record info from BSF_FILE symbols, and local
variables called "Bbss.bss", "", and "Drodata.rodata",
for later use in building psymtabs.
(elf_symfile_read): Allocate dbx_symfile_info here, to keep
the info collected in elf_symtab_read. Cleanup calls free_elfinfo.
(free_elfinfo): New fn, frees all chained stab_section_infos
in an objfile, and zaps the start-of-chain pointer.
(elfstab_offset_sections): New fn, looks in stab_section_info
chain to determine section bases to relocate a psymtab's worth
of symbols, as they are being read.
* mipsread.c: Conforming changes. Stabs-reading will relocate
using one offset. MIPS-reading will not relocate at all.
* partial-stab.h: Relocate different symbol types using different
offsets from section_offsets.
* symfile.c: Conforming changes.
(find_lowest_section): Unused function to use later
to free us from the Tyranny of the Text Section.
(syms_from_objfile): Translate absolute arg ADDR to offsets used
in all lower layers of symbol reading. Call format-specific
sym_offsets function to initialize offsets for high speed symbol
(symbol_file_add): Call reinit_frame_cache so callers don't have to.
(symbol_file_command, add_symbol_file_command): Callers changed.
* symmisc.c (dump_psymtab): Print new relocation parameters.
* xcoffread.c: Corresponding changes.
* buildsym.c: Tidy innerblock_complaint and blockvector_complaint.
* main.c (main): Read the $HOME/.gdbinit file before processing
the argv arguments (e.g. reading symbol files or core
files). This allows global parameters to be set, which will apply
during the symbol reading. The ./.gdbinit is still read after
argv processing.
* symtab.c (list_symbols): `i variables' shouldn't show enum values.
* xcoffexec.c: Clean up quote inside comment.
Fri Jul 3 20:18:26 1992 Fred Fish (
* breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c,
core.c, cplus-dem.c, dbxread.c, dwarfread.c, elfread.c, environ.c,
eval.c, findvar.c, gdbtypes.c, hppabsd-tdep.c, hppahpux-tdep.c,
i386-tdep.c, ieee-float.c, infcmd.c, inflow.c, infptrace.c,
infrun.c, m2-exp.y, mipsread.c, objfiles.c, parse.c, procfs.c,
putenv.c, remote-mm.c, remote-vx.c, solib.c, sparc-tdep.c,
sparc-xdep.c, stack.c, symfile.c, symtab.c, symtab.h, target.c,
tm-i386v.h, tm-sparc.h, utils.c, valarith.c, valops.c, valprint.c,
values.c, xcoffread.c:
Remove "(void)" casts from function calls where the return value
is ignored, in accordance with GNU coding standards.
Fri Jul 3 00:00:49 1992 John Gilmore (gnu at
* dbxread.c (process_one_symbol): Ignore N_MAIN, N_ENDM for Solaris.
* partial-stab.h: Ignore N_ENDM.
* elfread.c (elf_symtab_read): Ignore symbols that don't have a
CODE or DATA section attachment. This eliminates a lot of random
values from shared libraries, which screw up the ordinary symbols
in the address ranges they happen to overlap.
* buildsym.c (define_symbol): Eliminate special tests
for function types; move into "function" cases in switch statement.
(define_symbol: 'f', 'F', 'P'): Process all parameter types
in case they define new type numbers. But ignore them (FIXME).
('k', 'B'): Ignore const and volatile if we see them (FIXME).
(read_sun_builtin_type): Add commentary.
Wed Jul 1 00:47:02 1992 david d `zoo' zuhn (zoo at
* xm-rs6000.h: define MEM_FNS_DECLARED
Tue Jun 30 02:25:10 1992 John Gilmore (gnu at
* tm-mips.h (GDB_TARGET_IS_MIPS): Define for mips-xdep.c.
(READ_MIPS_FORMAT, COFF_FORMAT): Remove, unused now.
* mips-xdep.c: Remove most include files (unused, caused errs).
(fetch_core_registers): Use right parameters in dummy fn.
Mon Jun 29 18:30:57 1992 John Gilmore (gnu at
* buildsym.c (scan_file_globals): Beware the null file.
Fix from Jim Williams.
* stack.c (return_command): Evaluate expression *before* popping
off the stack frames! Fix inspired by Jim Williams.
(up_silently_command, down_silently_command): No sel frame is error.
* defs.h (memcpy, memset): Conditionalize decls on
#ifndef MEM_FNS_DECLARED, since DECstation differs.
(alloca): Break out the STDC and non-STDC alloca cases, to make
it work on old preprocessors as well as "picky ANSI" ones.
* xm-mips.h (memcpy, memset): Declare, and set MEM_FNS_DECLARED.
* mips-tdep.c (heuristic_proc_start): Zero arg produces zero.
* utils.c (fputs_demangled): Rename SLOP since DECstation system
header files define it!
* tm-29k.h (BREAKPOINT): Allow it to be overridden with -D.
Mon Jun 29 16:30:25 1992 Fred Fish (
* dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c,
symtab.h, tm-i386v4.h, valprint.c, values.c: Lint.
* breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c,
findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c,
putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h,
utils.c, valarith.c, valops.c, valprint.c, values.c:
Replace bcopy() use with memcpy(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c,
ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h,
target.c, values.c:
Replace bzero() use with memset(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* i386-tdep.c, main.c, valprint.c:
Replace bcmp() use with memcmp(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
Sun Jun 28 13:30:22 1992 Fred Fish (
* remote.c (remote_wait): Fix cast on signal() call.
* defs.h (alloca): More diddling with alloca. Have to ensure
that it has a prototype, so that if alloca is defined as a macro
that takes an arg, the definition is seen as a use of a macro
that takes an arg, to satisfy picky ANSI preprocessors.
Sat Jun 27 12:12:20 1992 Fred Fish (
* sparc-pinsn.c: Use <string.h> rather than "string.h", for
consistency with all other gdb files.
* cadillac.c: Use <string.h> rather than <strings.h>.
* cadillac.c (kernel_dispatch): Convert rindex usage to strrchr.
* (MAKE): Remove definition for consistency with
other files and to fix problem with recursive makes.
Fri Jun 26 19:03:23 1992 John Gilmore (gnu at
* hppahpux-xdep.c (child_xfer_memory): Avoid PT_WDUSER because it
crashes H-PUX.
Fri Jun 26 11:09:10 1992 Steve Chamberlain (
* source.c (print_source_lines): for DOS interoperability; don't
print CR (013) as ^M.
Thu Jun 25 15:18:42 1992 Stu Grossman (grossman at
* dbxread.c (dbx_symfile_init): Move more code under hp9000s800
* hppabsd-core.c: Don't include "param.h", include <sys/param.h>
* remote.c (remote_wait): Cast signal to void * to avoid warning
from busted HP compiler.
* partial-stab.h (N_SO): Rearrange code a little so that all SO
stabs cause end_psymtab to be called.
* buildsym.c (read_sun_builtin_type): Handle new FCS Sun CC
compiler feature of putting 'c' into basic type descriptors for
all forms of char.
* procfs.c (child_resume): Work around Solaris (on Sparc) lossage
where there is no place for nPC in prrun struct.
Thu Jun 25 12:06:00 1992 Fred Fish (
* mipsread.c: Pass NULL name pointer to init_type, not 0.
* gdbtypes.c (init_type): Use copy of typename on type_obstack.
* dwarfread.c (enum_type): Save enum names on type_obstack.
* dwarfread.c (struct_type): Save member name on type_obstack.
* symtab.c (_initialize_symtab): Fix misspelling.
* regex.c (store_jump, insert_jump): Return void.
Thu Jun 25 04:00:10 1992 John Gilmore (gnu at
* defs.h (PARAMS): Move to ../include/ansidecl.h.
(alloca): Declare return type on SPARC, since Sun doesn't.
(*_BYTE_ORDER): Improve comment: *must* be defined.
* tm-hppa.h: New file, architectural definition of HP PA.
* tm-hppabsd.h, tm-hppahpux.h: Shrink to deltas from tm-hppa.h.
* am29k-pinsn.c, am29k-tdep.c, copying.awk, copying.c,
hppa-coredep.c, hppa-pinsn.c, hppabsd-core.c, hppabsd-tdep.c,
hppabsd-xdep.c, hppahpux-tdep.c, hppahpux-xdep.c, remote-udi.c,
ser-go32.c, xcoffsolib.c: Remove <stdio.h> which is already in
* hppa-coredep.c, hppa-pinsn.c, hppabsd-core.c, hppabsd-tdep.c,
hppabsd-xdep.c, hppahpux-tdep.c, hppahpux-xdep.c, xcoffsolib.c,
xcoffsolib.h, xm-go32.h, xm-hppabsd.h, xm-hppahpux.h: Copyrights.
Wed Jun 24 12:53:20 1992 John Gilmore (gnu at
* printcmd.c (output_command): Thinko.
(x_command): Only set remembered size/format if cmd succeeds.
* dbxread.c (read_ofile_symtab): Remove N_CATCH special case,
since it is no longer used and burns time for every symbol read.
(process_one_symbol): Treat N_CATCH like default (complain).
Wed Jun 24 00:26:56 1992 Stu Grossman (grossman at
* partial-stab.h (case N_TEXT): Fix fencepost error when
detecting start of new symbol info after reading symtab for a
module with a zero length TEXT segment.
Tue Jun 23 21:46:26 1992 Fred Fish (
* (VERSION): Bump to 4.5.6.
* coffread.c (coff_end_symtab): Cast 2nd arg of complain() to
correct type.
* defs.h (NORETURN): Define away for Lucid compiler.
* remote.c (remote_timer, remote_interrupt): Signal handlers
take one int arg.
* ser-termios.c (serial_write, serial_close): Return whatever
value the write/close call returns, rather than falling off end.
* inferior.h (PTRACE_ARG3_TYPE): Third arg to ptrace is int on
more systems than it is "char *". Define PTRACE_ARG3_TYPE to
default to int.
* infptrace.c, hppabsd-xdep.c, hppahpux-xdep.c, i386-xdep.c,
inferior.h (call_ptrace): Use PTRACE_ARG3_TYPE to declare type
of third arg.
* a68v-xdep.c, arm-xdep.c, convex-xdep.c, hp300ux-xdep.c, infrun.c,
m88k-xdep.c, mach386-xdep.c, mips-xdep.c, os68k-xdep.c, pyr-tdep.c,
pyr-xdep.c, rs6000-xdep.c, sparc-xdep.c, sun3-xdep.c, sun386-xdep.c,
symm-xdep.c, ultra3-xdep.c: Use PTRACE_ARG3_TYPE to cast ptrace
argument 3.
* sparc-xdep.c, a68v-xdep.c (fetch_inferior_registers,
store_inferior_registers): Supply missing fourth argument to
* cadillac.c (kernel_dispatch): Make return type void.
* cadillac.c (iosig): Signal handlers take one int arg.
* valprint.c (val_print_fields): Call fprint_symbol to get
automatic C++ demangling for mangled field names.
Mon Jun 22 20:18:06 1992 Fred Fish (
* command.c (add_abbrev_prefix_cmd): Fix misspelling in comment.
* dwarfread.c (enum_type): Fix misspelling in comment.
* valprint.c (val_print_fields, cplus_val_print): Minor
adjustment to printing of C++ class structures to more closely
match format for printing C structures, with and without setting
pretty print.
Mon Jun 22 17:19:02 1992 Per Bothner (
* infrun.c (wait_for_inferior): Don't test for SIGEMT
(which is not a Posix signal) if it isn't defined.
* tm-linux.h, xm-linux.h, config/linux.m[ht],
New port to Linux (a free Unix clone for 386 machines).
Sat Jun 20 19:19:52 1992 John Gilmore (gnu at
COFF changes for dealing better with EPI 29K C compiler output.
* coffread.c (record_minimal_symbol): Pass the minsym type to it.
Callers changed.
(coff_end_symtab): Sort blocks if needed. Complain if misordered.
(read_coff_symtab): Move patch_opaque_types call from
coff_symfile_read. Restrict it to symtabs from this objfile.
(process_coff_symbol: C_TPDEF): Don't put ordinary foward
references on opaque type chain; just let coff_lookup_type handle 'em.
(decode_type): Complain about tagndx values on
non-struct/union/enum types, which the EPI compiler tends to produce.
* symtab.c (list_symbols): Make minimal symbol variable-finding work.
* tm-68k.h (FIX_CALL_DUMMY): Avoid alignment and byte order
* elfread.c (elf_symfile_read): Update bfd_elf_find_section
usage to match new prototype. Include libbfd.h to get prototype.
* source.c (find_source_lines): Handle large st_size fields.
Sat Jun 20 16:28:39 1992 Fred Fish (
* infcmd.c (jump_command): Use cleanups to avoid memory leaks.
* stack.c (return_command): Use cleanups to avoid memory leaks.
Fri Jun 19 19:06:41 1992 John Gilmore (gnu at
* remote-adapt.c, remote-eb.c, remote-mm.c: Lint. Fix
* tm-29k.h (SDB_REG_TO_REGNUM): Add for EPI 29K C compiler.
Fri Jun 19 15:30:15 1992 Stu Grossman (grossman at
*, dbxread.c, hppa-coredep.c, hppa-pinsn.c,
hppabsd-core.c, hppabsd-tdep.c, hppabsd-xdep.c, hppahpux-tdep.c,
hppahpux-xdep.c, munch, partial-stab.h, tm-hppabsd.h,
tm-hppahpux.h, xm-hppabsd.h, xm-hppahpux.h: HPPA merge.
* (, Filter out bogus extern
declarations of malloc/realloc/free that are inserted by some
versions of yacc.
* m2-exp.y: Prevent conflicts with TRUE and FALSE tokens by
#undeffing them.
* xm-rs6000.h: Declare malloc/realloc/free appropriately. Yet
another decl of strdup (this really ought to come from libiberty.h!).
Fri Jun 19 10:28:05 1992 John Gilmore (gnu at
* remote.c (getpkt): Error if input exceeds buffer size.
(_initialize_remote): `set remotedebug' enables packet trace.
* dbxread.c (process_one_symbol:N_FUN): GCC now produces relative
N_SLINE's, etc, just like Sun cc on Solaris2.
* am29k-tdep.c (read_register_stack, write_register_stack):
Change RSTACK_HIGH_ADDR to rstack_high_address, a user-settable
variable. Add `set' and `show' commands for it.
Thu Jun 18 19:35:22 1992 Fred Fish (
* valprint.c (type_print_1): Plug memory leak. Print all
C++ syms as demangled, not just functions.
* buildsym.c (read_range_type): When we find a signed char
type, do a lookup of signed char, not plain char. Plain char's
still get looked up as plain char's elsewhere.
Thu Jun 18 18:59:04 1992 John Gilmore (gnu at
* eval.c: Avoid residue-by-zero when evaluating without side effects.
(Bug and fix found by Pierre Willard.)
Wed Jun 17 13:08:33 1992 Stu Grossman (grossman at
* xm-rs6000.h: Fix decls for malloc, realloc, and free.
* xm-rs6000.h: Add decl for strdup().
* tm-rs6000.h: Remove #include of inferior.h. Fixes many
compilation errors.
* breakpoint.c (enable_command, disable_command): Without args,
should only affect normal breakpoints and watchpoints.
* m68k-pinsn.c (print_insn_arg): Make register be const.
* xcoffexec.c: Remove ' from comment.
* xm-sun3os4.h: Define MALLOC_INCOMPATIBLE to avoid conflicts
with decls of malloc in (as produced by yacc).
There's got to be a better way to do this...
Wed Jun 17 11:10:40 1992 Fred Fish (
* partial-stab.h: Convert single rindex use to strrchr.
* mipsread.c, dbxread.c: Remove troublesome inclusion of non-
standard <strings.h> file, now that the only single use of
rindex in the gdb source files is gone.
Tue Jun 16 22:17:49 1992 Fred Fish (
* mipsread.c: Undo ill effects from including <strings.h>,
which #defines index to be strchr. Unfortunately, index is
a member of a symbol table structure that can't be changed.
* mipsread.c: tm-mips.h includes coff/symconst.h and coff/sym.h,
remove redundant #include's.
Tue Jun 16 14:15:51 1992 Stu Grossman (grossman at
* mipsread.c: #include <strings.h> for rindex().
Tue Jun 16 09:01:49 1992 Fred Fish (
* xcoffexec.c (map_vmap): Turn comment into a real C comment.
Mon Jun 15 18:41:23 1992 Stu Grossman (grossman at
* dbxread.c (process_one_symbol), partial-stab.h: Ignore
extraneous SO stabs from busted C++ compilers.
Mon Jun 15 12:21:45 1992 Fred Fish (
* (VERSION): Bump to 4.5.5.
* symtab.c (decode_line_1): Until C++ support stabilizes, when
C++ lookups fail, print possibly helpful hint about completion.
* cplus-dem.c (demangle_signature): Fix ARM style demangling
for static data members.
* dbxread.c (dbx_psymtab_to_symtab_1): Fix prototype.
* config/ (INSTALL): Don't use /usr/ucb/install,
it's broken on ncr3000's.
Mon Jun 15 07:21:00 1992 Fred Fish (
* dwarfread.c (decode_modified_type): Change type of first arg.
Change 'modifier' to char from unsigned char. Cast single use
that needs to be unsigned char.
* symtab.h (SYMBOL_BASEREG_VALID): Explain disabling.
* utils.c (strdup_demangled): Add function.
* defs.h (strdup_demangled): Add prototype.
* stack.c (return_command): Demangle C++ function names for query.
* infcmd.c (jump_command): Demangle C++ function names for query.
* cplus-dem.c (consume_count): New function and prototype.
* cplus-dem.c (demangle_class, gnu_special, demangle_func_type,
do_type): Replace conversion code with consume_count().
* cplus-dem.c (gnu_special): Fix demangled of static members.
* source.c (list_command): Print demangled function names
when appropriate. Fix supplied by Peter Schauer.
Mon Jun 15 01:45:48 1992 John Gilmore (gnu at
* sparc-tdep.c: Clean up slightly for Solaris2.
* buildsym.c (define_symbol): Nameless types are now on several
platforms; generalize them and un-ifdef them to make Solaris 2
Sun Jun 14 10:55:51 1992 John Gilmore (gnu at
* infcmd.c: Fix typo (reported by Rob Savoye).
* xm-sun4sol2.h (gregset_t): Thinko in register set definition.
* symtab.h: Disable SYMBOL_BASEREG_VALID until it works.
* dbxread.c (dbx_psymtab_to_symtab_1): Renamed from
psymtab_to_symtab_1. Use current psymtab's sym_offset and symbol_size,
rather than the one for the first file in the dependency chain.
* dbxread.c (end_psymtab): Only reset texthigh if it's not already
set. Don't reset our own texthigh, or dependency-only pst's, in
scanning all the rest of the psymtabs.
(process_one_symbol): Fix comments around N_OBJ, N_OPT, N_UNDF.
* buildsym.h (N_UNDF): Improve comments.
(N_LSYM, etc): Skip types without names (":T(0,3)=sfoob...").
Sat Jun 13 11:16:45 1992 Fred Fish (fnf at
* symtab.h (struct symbol): Add aux_value union for preserving
an additional per-symbol value.
* frame.h (FRAME_GET_BASEREG_VALUE): Provide default definition.
* findvar.c (read_var_value): Use SYMBOL_BASEREG if valid.
* printcmd.c (address_info): Use SYMBOL_BASEREG if valid.
* symmisc.c (print_symbol): Use SYMBOL_BASEREG if valid.
Sat Jun 13 09:18:46 1992 Michael Tiemann (
* symfile.c (clear_symtab_users_once): Now non-static (for
Fri Jun 12 18:54:40 1992 John Gilmore (gnu at
* arm-pinsn.c, i960-pinsn.c, m68k-pinsn.c, mips-pinsn.c,
ns32k-pinsn.c, pyr-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c,
vax-pinsn.c: Remove reg_names decl (now in defs.h).
Solaris-2 support on SPARC:
* dbxread.c: Add symbol_size to struct dbx_symfile_info.
Add symbol_size and file offsets to struct symloc.
Add static symbol_table_offset, string_table_offset,
file_string_table_offset, next_file_string_table_offset,
(add_old_header_file): Convert error() to complain()t.
(dbx_symfile_read): Get symbol size via the objfile.
Also get symbol_table_offset.
(dbx_symfile_init): Record symbol size and count via the objfile.
(dbx_next_symbol_text): Always add file_string_table_offset when
accessing string table.
(read_dbx_symtab): Initialize file_string_table_offset to 0.
(SET_NAMESTRING): Use the offset.
(end_psymtab): Large kludge to determine addresses where source
files start and end (for the psymtab header).
(psymtab_to_symtab_1): Set file_string_table_offset before reading.
Get this, symbol size, and symbol offset, from psymtab.
(read_ofile_symtab): Don't back up one symbol for Solaris2.
Patch up last_source_start_addr if zero in N_SO.
(process_one_symbol): Add variable function_start_offset.
( "", N_FUN, N_LBRAC, N_RBRAC, N_SLINE): Add ifdef for
( "", N_OBJ, N_OPT): Ignore.
(elfstab_build_psymtabs): New function to read stabs out of
an ELF file.
* Accept $(BISON) even though we really want $(YACC).
(gdb): use GLOBAL_CFLAGS when linking, too.
* partial-stab.h (N_UNDF): Deal with Sol2 relative stringtab offsets.
(N_OBJ, N_OPT): Ignore.
('f', 'F'): Save last function name.
* elfread.c (record_minimal_symbol_and_info): Kludged to put
extra info in the minimal symbol.
(elf_symtab_read): The extra info is the size of an ELF object,
which was kludged to us in the `udata' field of the BFD symbol.
Gag me with a crowbar...
(elf_symfile_read): Keep track of both the absolute load address,
and the offset between load addr and symbols. Handle STABS as
well as DWARF sections, passing the absolute load address to
* symfile.h: Prototype elfstab_build_psymtabs.
* symfile.c: Add almost-OK debug versions of add_psymbol_*to_list.
* xm-sysv4.h: Add <limits.h> to avoid conflicting defns in defs.h.
* buildsym.h: Add processing_acc_compilation flag.
* buildsym.c (read_sun_builtin_type, read_sun_floating_type): New.
(define_symbol): Skip arg types in function entries. Resolve
overloaded 'P' which acc uses for prototypes of functions called
by this file.
(read_type: 'b', 'r'): Handle Solaris2 builtin types.
* minsyms.c (prim_record_minimal_symbol_and_info): Hack to
save size of ELF symbols. FIXME.
* tm-sun4os5.h: Rename to tm-sun4sol2.h. Update defines for Sol2.
* xm-sun4os5.h: Rename to xm-sun4sol2.h. Hack more defines.
* Solaris config is sparc-sun-solaris2.
* config/sun4os5.m[ht]: Rename to config/sun4sol2.m[ht]; new xm, tm.
* objfiles.c (free_objfile): Eliminate storage leaks. Contributed
by <>.
* symfile.c (symfile_bfd_open): Comment where name is freed.
* symmisc.c (extend_psymbol_list): Comment where list is freed.
Fri Jun 12 08:24:36 1992 Fred Fish (fnf at
* expprint.c (print_subexp): Add missing ']'.
* defs.h (reg_names): Fix declaration to match that in infcmd.c
* stack.c (reg_names): Delete redundant (and inconsistent) decl.
* WHATS.NEW: Point out improved C++ function name handling.
* gdbtypes.c (lookup_fundamental_type): For now, use the same
type names for both implicitly and explicitly signed integral
types. See comment in the source code.
Thu Jun 11 12:31:50 1992 John Gilmore (gnu at
Two `long long' fixes from Robert R. Henry (
* defs.h (longest_to_int): Avoid void arm of ?: in error case.
* expprint.c (print_subexp): Fix printing of register names.
Thu Jun 11 01:33:40 1992 John Gilmore (gnu at
* inferior.h (register_valid): Declare.
* remote-udi.c, rs6000-xdep.c, sparc-xdep.c, tm-rs6000.h: Remove decl.
macros for traversing the data structures in a single objfile.
* tm-m88k.h, tm-sparc.h (REGISTER_NAMES): Remove extra semicolon.
* tm-i960.h (REGISTER_NAMES): Cosmetic change.
* infcmd.c: Lint.
Tue Jun 9 17:19:45 1992 Fred Fish (fnf at
* c-exp.y, m2-exp.y: Move remapping defines for malloc and
realloc. Add remapping defines for {yyss, yyssp, yyvs, yyvsp}.
* config/{,,,,}: Add definition for INSTALL using /usr/ucb/install.
Tue Jun 9 16:29:19 1992 Stu Grossman (grossman at
* depend: rebuild to account for remote-st2000.c.
* remote-st2000.c: Almost works now.
* tm-st2000.h: Need to turn on HAVE_68881, else things won't compile.
Mon Jun 8 23:05:51 1992 Fred Fish (
* c-exp.y (yylex): Recognize single-quoted strings that specify
tokens with embedded whitespace, such as C++ demangled names.
* defs.h (demangle_and_match, strcmp_iw, skip_quoted): Prototypes.
* main.c (gdb_completer_quote_characters): Add global variable.
* main.c (symbol_completion_function): Total rewrite for C++
demangled name handling.
* main.c (skip_quoted): New function.
* main.c (main): Set rl_completer_quote_characters.
* symmisc.c (dump_symtab): Print source language for symtab.
* symtab.c (expensive_mangler): Add prototype and function.
* symtab.c (completion_list_add_symbol): Total rewrite for new
C++ demangled name handling.
* symtab.c (lookup_symbol): Check for demangled C++ symbol first,
other changes for demangled C++ symbol handling.
* symtab.c (lookup_demangled_block_symbol): Use demangle_and_match.
* symtab.c (lookup_demangled_partial_symbol): Use demangle_and_match.
* symtab.c (decode_line_1): Recognize C++ demangled names on input.
* symtab.c (completion_list_add_symbol): Total rewrite for new
C++ demangled name handling.
* symtab.c (expensive_mangler): New function.
* utils.c (strcmp_iw, demangle_and_match): New functions.
* xcoffread.c (aixcoff_symfile_read): Fix prototype.
Mon Jun 8 21:59:08 1992 John Gilmore (gnu at
* Roll VERSION to 4.5.4.
*, config/*.mh, config/*.mt: Rename TM_CFLAGS
to MT_CFLAGS, XM_CFLAGS to MH_CFLAGS to match file names.
* config/ Add MH_CFLAGS=-xs to save debug info.
Mon Jun 8 14:17:42 1992 Stu Grossman (grossman at
* alldeps.mak: Rebuild to account for new files.
* config/ Use tm-st2000.h, not tm-68k.h.
* tm-st2000.h: New file.
* Tandem debug monitor (st2000) support.
* remote-st2000.c, config/ ditto.
Fri Jun 5 11:51:01 1992 John Gilmore (gnu at
* blockframe.c (inside_entry_file, inside_main_func,
inside_entry_func): Return 0 if no symbols; avoid crashing.
Wed Jun 3 17:48:04 1992 John Gilmore (
* xcoffread.c (read_xcoff_symtab): Set c_sclass from n_sclass
without masking, since it is signed and will later be compared
against signed quantities. The right fix is probably to make
it all unsigned, but this is a small, safe fix for this release.
FIXME -- make the real change sometime soon.
Mon Jun 1 16:16:12 1992 Michael Tiemann (
* remote-vx.c (vx_load_command,add_symbol_stub): Default READNOW
parameter in call to `symbol_file_add' to 0.
* xm-sun4os4.h (MALLOC_INCOMPATIBLE): Define it.
Sun May 31 06:38:27 1992 Michael Tiemann (
* Handle -m680[01234]0-wrs.
Fri May 29 22:16:02 1992 Michael Tiemann (
* m68k-pinsn.c (print_insn_arg): Pass &EXT_FORMAT_68881 to
Wed May 27 09:27:57 1992 John Gilmore (gnu at
* valops.c (value_assign): Lint, by Pierre Willard.
Tue May 19 19:38:10 1992 John Gilmore (gnu at
* coredep.c (fetch_core_registers): Remove premature warning,
which triggers on DECstation even though all regs are accessible.
* m68k-pinsn.c (print_insn_arg): Use new macros to get
sign-extension of instruction fields even on unsigned-char hosts.
Bug found by Fred J Roeber,
88K changes inspired by Ted Lemon (uunet!lupine!mellon):
* tm-m88k.h, tm-umax.h: Avoid sizeof() in REGISTER_xxx macros,
since they define the target, not the host.
* m88k-pinsn.c: Fix typo.
Thu May 14 01:16:48 1992 John Gilmore (gnu at
* valarith.c (value_zerop): -0.0 is still zero.
* eval.c (evaluate_subexp): Avoid NaN anomalies in float compares.
Patches by Paul Eggert <>.
Mon May 18 13:53:51 1992 Stu Grossman (grossman at
* alldeps.mak, depend: re-make to account for ser-*.c.
Sun May 17 16:51:20 1992 Fred Fish (
* inflow.c (new_tty): Temporarily ignore SIGTTOU when
disconnecting from controlling terminal, to avoid gdb hanging
on SVR4. Fixes bug reported by Oliver Okrongli.
* procfs.c (PROC_NAME_FMT): Change format to match default used
by system, as suggested by Oliver Okrongli.
* tm-68k.h (FRAME_FIND_SAVED_REGS): Apply missing parentheses
bug fix from Brent Townshend (bst%tt@cam.ORG).
* c-exp.y (nonempty_typelist): Fix memory overrun bug reported
* dwarfread.c (decode_subscr_data): Fix bug in calculation of
length of non-zero lowerbound arrays. Bug fix from Peggy Fieland.
* objfiles.h (unlink_objfile): Add prototype.
* objfiles.c (unlink_objfile): Add function.
* objfiles.c (free_objfile): Call unlink_objfile.
* objfiles.c (allocate_objfile): Call unlink_objfile on newly
remapped objfiles. Bug reported by
Also, discard old possibly bogus sf struct.
* symfile.c (symbol_file_add): Call init_entry_point_info() and
find_sym_fns() for remapped symbol files, in case of any changes
since the last mapping.
Wed May 13 18:28:20 1992 Steve Chamberlain (
* findvar.c (read_relative_register_raw_bytes): use the raw size
of a register to bcopy, rather than the host's sizeof(CORE_ADDR).
Tue May 12 17:44:39 1992 Steve Chamberlain (
Changes to support GDB running on DOS using GO32 and H8 support
* defs.h: if xm.h doesn't define FOPEN_RB, include "fopen-same.h",
allowing hosts with different text and binary file formats to
* coffread.c (read_coff_symtab): changed calling convention and
operation - now it opens its own file with FOPEN_RB rather than
duping and fdopening the provided handle.
* dbxread.c, cplus-dem.c: #include mangling.
* exec.c: If O_BINARY isn't defined, set it to 0, call openp for
binary files oring in the right bit.
* utils.c, terminal.h, inflow.c: hackery because dos doesn't have terminals.
* remote-hms.c: cleanup to use the new remote serial stuff
* serial.h, ser-termios.c, ser-go32.c: newfiles to provide host
independent remote terminal I/O.
* remote.c: if DONT_USE_REMOTE not defined, then don't use it.
* source.c (openp): fix off by one problem removing / - can now
open a source file in the root directory with DOS.
* values.c (value_as_pointer): remove bogus address bits from
long. (unpack_long): unpack into unsigned long/short if pointer.
Tue May 12 14:15:48 1992 Stu Grossman (grossman at
* infrun.c (child_attach): Don't allow gdb to attach to itself.
It gets permanently stuck in many OSes.
* breakpoint.c, infcmd.c, infrun.c, utils.c: Change many printfs
to printf_filtered.
* breakpoint.c: Improve help text for info breakpoints.
Mon May 11 14:17:18 1992 John Gilmore (gnu at
* README: Add pointer to internals doc, and describe reading
info files.
* utils.c (print_sys_errmsg): Use stderr. Reported by Pierre Willard.
* symtab.c (output_source_filename): Remove old glop for wrapping
lines, use wrap_here. Reported by Pierre Willard (
Thu May 7 11:45:03 1992 John Gilmore (gnu at
* version.c should depend on Makefile, not
* munch: Add sort -u to avoid duplications.
* symtab.c (lookup_symbol): Improve Stu's fix of 22 April.
Improved fix by (Doug Hahn).
Mon May 11 13:27:46 1992 Fred Fish (
* cplus-dem.c (demangle_signature): Recognize misplaced '_' to
avoid infinite loops while demangling bogus mangled names.
* valprint.c (type_print_base): Minor fix for GNU style guide
Sat May 9 18:02:17 1992 Fred Fish (fnf at fishpond)
* (VERSION): Bump to 4.5.3
* (DEMANGLE_OPTS): Remove obsolete -Dnounderscore
* (demangle): New target to create standalone
demangler with same code and options as internal demangler.
* cplus-dem.c: Massive restructuring, rewriting, cleanups, etc
to support ARM style and Lucid style demangling, improve
maintainability, fix several demangling bugs. More changes
to follow.
* defs.h (strstr): Add ANSI compatible prototype.
* valprint.c (type_print_1): Demangle using ansi option.
* config/ (DEMANGLE_OPTS): Remove -Dnounderscore.
Sat May 9 14:47:28 1992 Stu Grossman (grossman at
* xcoffexec.c (vmap_exec): Don't assume .text and .data are the
first two sections.
Fri May 8 11:42:15 1992 Per Bothner (
* mipsread.c (parse_procedure): Return rather than using
uninitialized variable 'b'.
Fri May 8 07:48:27 1992 Stu Grossman (grossman at
*, remote-udi.c, remote-vx.c, 29k-share/dfe/mini2udi.c,
29k-share/dfe/yank.c, vx-share/xdr_ptrace.c, vx-share/xdr_regs.c:
Remove -I29k-share, -Ivx-share from Make #includes
relative to each source file.
Fri May 8 07:48:27 1992 K. Richard Pixley (
Thu May 7 10:00:52 1992 Stu Grossman (grossman at
* am29k-pinsn.c: Use new opcode table in "opcode/a29k.h".
* am29k-tdep.c: Update to latest code from AMD.
(get_saved_register) don't crap out if no frame.
* remote-udi.c: Set/clear inferior_pid as appropriate.
(udi_open) call target_preopen, don't close fd 0!!!, clean up
error handling. Fixup end-of-debugging messages.
(udi_fetch_registers) clean up big time, mainly don't multiply
register_valid indices by 4, and use proper Offset when reading
gr96-gr127. (udi_store_registers) general cleanup.
(fetch_register) cleanup, simplify. (regnum_to_srnum)
* tm-29k.h: Upgrade to latest code from AMD.
* 29k-share/udi/udip2soc.c: Get rid of useless errmsg_m macro.
(UDIConnect) Clean up error processing (like, don't do exit() if
execlp fails), make code restartable, make more attractive.
(UDIStop) Use SIGINT instead of SIGUSR1, as isstip won't stop
Wed May 6 14:34:18 1992 Per Bothner (
* tm-irix3.h: Re-define CPLUS_MARKER to '.'.
* xm-rs6000.h, tm-rs6000.h: Move re-definition of CPLUS_MARKER
from former to latter.
Wed May 6 14:12:35 1992 Fred Fish (
* cplus-dem.c (do_args): Handle void args the same as others.
* objfiles.c (free_objfile): Only try to unmap files when
reusable objfiles are supported.
* valprint.c (type_print_varspec_suffix): Add parameter that
specifies if C++ demangling included function arguments. Use
it to suppress printing extra pair of ()'s.
* valprint.c (type_print_1): Fix problem with printing demangled
C++ function types where demangled type includes the function
Tue May 5 11:10:27 1992 Fred Fish (
* (DEMANGLER): Define and default to cplus-dem.
Allows selection of C++ demangler to be a configuration option
until multiple demanglers are supported.
* demangle.h: New include file for extended demangler support.
* breakpoint.c, gdbtypes.c, printcmd.c, stack.c, symtab.c,
utils.c, valprint.c: Include "demangle.h" and change all calls
to cplus_demangle() or fputs_demangled() to use individual
demangling options.
* valprint.c (type_print_1): Change options to cplus_demangle
to print demangled function args. Still broken, but now less so.
* cplus-dem.c: Include demangle.h, reorganize and update some
comments to reflect reality.
* cplus-dem.c (cplus_demangle, cplus_mangle_opname): Change
second arg from fixed integer to bit based multiple options.
* cplus-dem.c (optable): Reformat and replace ansi members with
bit based options.
* cplus-dem.c (do_type): Fix bug with parsing missing return type.
Mon May 4 22:26:59 1992 John Gilmore (gnu at
* values.c (set_internalvar): Force evaluation of lazy values.
Bug reported by RMS.
Sun May 3 15:47:45 1992 Fred Fish (
* (VERSION): Bump to 4.5.2.
* (DEMANGLE_OPTS): Add, default to -Dnounderscore.
* Simplify ncr3000 gdb_host logic, add gdb_target.
* dwarfread.c (struct_type): Apply fix from Peggy Fieland for
proper handling of bit fields.
* gdbtypes.h (struct type): Clarify use of field.bitpos.
* symtab.h: Fix couple of misspellings in comments.
* value.h (struct value): Clarify use of bitpos.
* value.h (unpack_field_as_long): Change prototype, returns
* values.c (unpack_field_as_long): Change return type to LONGEST,
sign extend unpacked fields that are signed, other rewriting.
* config/ New target config file.
Fri May 1 01:53:26 1992 John Gilmore (gnu at
* utils.c (printchar): Print 0x7F and 0x80-0x9F in \nnn notation
even when printing 8-bit characters.
* gdbtypes.c (make_{reference,pointer,function}_type): New
functions which handle overwriting of forward-referenced types
for stabs file reading.
(lookup_{reference,pointer,function}_type): These just call
the make_*_type functions with a null storage alloc parameter.
* gdbtypes.h (make_{reference,pointer,function}_type): Declare.
* xcoffread.c (smash_to_pointer_type): Remove, no longer used.
* buildsym.c (dbx_lookup_type): Zero result for (-1,-1) arg.
(dbx_alloc_type): Make it easier to understand. No funct change.
(define_symbol: 't'): Don't put the typedef name into the name of
the struct, union, or enum. Bugfix.
(read_type: '*', '&', 'f'): Add comments. Use make_XXX_type
routines to properly handle overwriting preallocated types so that
forward references will work.
(read_enum_type): Force enum values to file scope, due to bug in
Sun compiler output. FIXME, fix later.
Remove unused header_file_prev_index mechanism. It was already
obsolete in gdb-3.5. These comments appeared in 3.5:
/* This code was used before I knew about the instance codes.
My first hypothesis is that it is not necessary now
that instance codes are handled. */
* dbxread.c (add_new_header_file): Remove header_file_prev_index.
* buildsym.h: Remove it and prev_index that saves it.
* buildsym.c (push_subfile, pop_subfile, start_symtab): Remove it.
* solib.c (special_symbol_handling): When called from core files,
must set up debug_addr. Don't print error messages, just return.
* symmisc.c (print_symbol): Less ascii diarrhea for enums, please.
Wed Apr 29 15:26:51 1992 Per Bothner (
* cplus-dem.c: Allow nested class names (as in
Allow the cleaner cfront style of nested class names
(Q2_3Foo3Bar as well as Q23Foo3Bar).
Make cplus_demangle re-entrant by removing use of global
variables. Instead, place all shared variables in a
stack-allocated structure, and pass around its address.
Fri Apr 24 07:41:19 1992 Stu Grossman (grossman at
* (make-proto-gdb-1): 1st cut at packaging
29k-share/* subdirs...
* remote-udi.c (udi_insert/remove_breakpoint): Completely
rewrite, only leave out the bugs.