| # Copyright 1988-2021 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| # Start with a fresh gdb |
| |
| gdb_exit |
| gdb_start |
| |
| set prev_timeout $timeout |
| set timeout 60 |
| |
| # |
| # test default actions of gdb commands |
| # |
| |
| gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" |
| |
| # test append |
| gdb_test "append" "List of append subcommands:.*" |
| gdb_test "append binary" "List of append binary subcommands:.*" |
| gdb_test "append memory" "Missing filename\." |
| gdb_test "append value" "Missing filename\." |
| gdb_test "append binary memory" "Missing filename\." |
| gdb_test "append binary value" "Missing filename\." |
| |
| if !$use_gdb_stub { |
| gdb_test_multiple "attach" "attach" { |
| -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\ |
| { pass "attach" } |
| -re "You can't do that when your target is `None'.*$gdb_prompt $"\ |
| { pass "attach" } |
| -re "You can't do that without a process to debug.*$gdb_prompt $"\ |
| { pass "attach" } |
| -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\ |
| { pass "attach" } |
| -re "Kill it. .y or n." { |
| send_gdb "y\n" |
| exp_continue |
| } |
| } |
| |
| gdb_test "break" "No default breakpoint address now." |
| foreach i "b br bre brea" { |
| gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation" |
| } |
| |
| |
| gdb_test "backtrace" "No stack." |
| |
| # ba and bac are no longer unique command prefixes. So these tests |
| # elict an error from GDB. |
| # GDB needs to be fixed to map unique alias here for ba bac. |
| # |
| foreach i "bt ba bac" { |
| gdb_test $i "No stack." "backtrace \"$i\" abbreviation" |
| } |
| } else { |
| warning "Skipping backtrace and break tests because of GDB stub." |
| } |
| |
| gdb_test "continue" "The program is not being run." |
| gdb_test "c" "The program is not being run." "continue \"c\" abbreviation" |
| |
| #test call |
| gdb_test "call" "The history is empty..*" |
| |
| |
| #test catch |
| gdb_test "catch" "List of catch subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help catch\" followed by catch subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." |
| |
| #test cd |
| gdb_test "cd" "Working directory \[^\r\n\]*\(\r\n \\(canonically \[^\r\n\]*\\)\)?\\." |
| |
| #test clear |
| gdb_test "clear" "No source file specified..*" |
| |
| #test commands |
| gdb_test "commands" "Argument required .one or more breakpoint numbers...*" |
| |
| #test condition |
| gdb_test "condition" "Argument required .breakpoint number.*" |
| |
| #test core-file |
| gdb_test "core-file" "No core file now." |
| #test delete "d" abbreviation |
| gdb_test_no_output "d" "delete \"d\" abbreviation" |
| #test delete |
| gdb_test_no_output "delete" "delete" |
| #test define |
| gdb_test "define" "Argument required \[(\]name of command to define\[)\]." |
| #test delete breakpoints |
| gdb_test_no_output "delete breakpoints" "delete breakpoints" |
| #test delete display |
| # FIXME -- need to dump full output to detailed log |
| |
| gdb_test "delete display" \ |
| "" \ |
| "delete display prompt" \ |
| "Delete all auto-display expressions.*y or n. $" \ |
| "y" |
| |
| |
| #test detach |
| gdb_test "detach" ".*" |
| |
| #test directory |
| # FIXME -- need to dump full output to detailed log |
| |
| gdb_test "directory" \ |
| "Source directories searched: .cdir\[:;\].cwd.*" \ |
| "directory prompt" \ |
| "Reinitialize source path to empty.*y or n. $" \ |
| "y" |
| |
| #test disable "dis" abbreviation |
| gdb_test_no_output "dis" "disable \"dis\" abbreviation" |
| #test disable "disa" abbreviation |
| gdb_test_no_output "disa" "disable \"disa\" abbreviation" |
| #test disable |
| gdb_test_no_output "disable" "disable" |
| #test disable breakpoints |
| gdb_test_no_output "disable breakpoints" "disable breakpoints" |
| #test disable display |
| gdb_test_no_output "disable display" "disable display" |
| #test disassemble |
| gdb_test "disassemble" "No frame selected." |
| #test display |
| gdb_test_no_output "display" "display" |
| #test do |
| gdb_test "do" "No stack." |
| #test document |
| gdb_test "document" "Argument required .name of command to define.*" |
| #test down |
| gdb_test "down" "No stack.*" |
| #test down-silently |
| gdb_test "down-silently" "No stack." |
| # test dump |
| gdb_test "dump" "List of dump subcommands:.*" |
| gdb_test "dump binary" "List of dump binary subcommands:.*" |
| gdb_test "dump ihex" "List of dump ihex subcommands:.*" |
| gdb_test "dump memory" "Missing filename\." |
| gdb_test "dump srec" "List of dump srec subcommands:.*" |
| gdb_test "dump tekhex" "List of dump tekhex subcommands:.*" |
| gdb_test "dump value" "Missing filename\." |
| gdb_test "dump binary memory" "Missing filename\." |
| gdb_test "dump binary value" "Missing filename\." |
| gdb_test "dump ihex memory" "Missing filename\." |
| gdb_test "dump ihex value" "Missing filename\." |
| gdb_test "dump srec memory" "Missing filename\." |
| gdb_test "dump srec value" "Missing filename\." |
| gdb_test "dump tekhex memory" "Missing filename\." |
| gdb_test "dump tekhex value" "Missing filename\." |
| #test echo |
| gdb_test_no_output "echo" "echo" |
| #test enable breakpoints delete |
| gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" |
| #test enable breakpoints once |
| gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" |
| #test enable breakpoints |
| gdb_test_no_output "enable breakpoints" "enable breakpoints" |
| #test enable delete |
| gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" |
| #test enable display |
| gdb_test_no_output "enable display" "enable display" |
| #test enable once |
| gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" |
| #test enable |
| gdb_test_no_output "enable" "enable" |
| #test exec-file |
| send_gdb "exec-file\n" |
| gdb_expect { |
| -re "No executable file now..*$gdb_prompt $" { |
| pass "exec-file" |
| } |
| -re "exec-file.*A program is being debugged already. Kill it. .y or n.*$" { |
| send_gdb "n\n" |
| if $verbose>1 then { |
| send_user "\tDidn't kill program being debugged\n" |
| } |
| gdb_expect -re "$gdb_prompt $" { } |
| pass "exec-file" |
| } |
| -re "$gdb_prompt $" { fail "exec-file" } |
| timeout { fail "(timeout) exec-file" } |
| } |
| |
| #test frame "f" abbreviation |
| gdb_test "f" "No stack." "frame \"f\" abbreviation" |
| #test frame |
| gdb_test "frame" "No stack." |
| #test fg |
| gdb_test "fg" "The program is not being run." |
| |
| #test file |
| send_gdb "file\n" |
| gdb_expect { |
| -re "No executable file now..*$gdb_prompt $"\ |
| { pass "file" } |
| -re ".*A program is being debugged already. Kill it. .y or n.*$" { |
| send_gdb "n\n" |
| if $verbose>1 then { |
| send_user "\t\tDidn't kill program being debugged\n" |
| } |
| gdb_expect -re "$gdb_prompt $" { } |
| pass "file" |
| } |
| -re ".*$gdb_prompt $" { fail "file" } |
| timeout { fail "(timeout) file" } |
| } |
| |
| #test finish |
| gdb_test "finish" "The program is not being run." |
| #test forward-search |
| # The message here comes from the regexp library, not gdb, and so can |
| # vary on different systems. |
| gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" |
| #test gcore |
| |
| gdb_test_multiple "gcore" "gcore" { |
| -re "You can\'t do that without a process to debug.*$gdb_prompt $" { |
| pass "gcore" |
| } |
| -re "Undefined command: .*$gdb_prompt $" { |
| pass "gcore" |
| } |
| } |
| |
| gdb_test_multiple "generate-core-file" "generate-core-file" { |
| -re "You can\'t do that without a process to debug.*$gdb_prompt $" { |
| pass "generate-core-file" |
| } |
| -re "Undefined command: .*$gdb_prompt $" { |
| pass "generate-core-file" |
| } |
| } |
| |
| #test help "h" abbreviation |
| gdb_test "h" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- User-defined aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation" |
| #test help |
| gdb_test "help" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- User-defined aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." |
| #test handle |
| gdb_test "handle" "Argument required .signal to handle.*" |
| #test info "i" abbreviation |
| gdb_test "i" "List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation" |
| #test info |
| gdb_test "info" "List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." |
| #test ignore |
| gdb_test "ignore" "Argument required .a breakpoint number.*" |
| #test info address |
| gdb_test "info address" "Argument required." |
| #test info all-registers |
| gdb_test "info all-registers" "The program has no registers now." |
| #test info args |
| gdb_test "info args" "No frame selected." |
| #test info bogus-gdb-command |
| gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\". Try \"help info\".*" |
| #test info breakpoints |
| gdb_test "info breakpoints" "No breakpoints or watchpoints." |
| #test info copying |
| # FIXME -- doesn't work worth a shit |
| #send_gdb "info copying" |
| # -re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."# |
| gdb_test "info copying" |
| # } |
| # |
| # |
| #test info display |
| gdb_test "info display" "There are no auto-display expressions now." |
| #test info frame "f" abbreviation |
| gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation" |
| #test info frame |
| gdb_test "info frame" "No stack.|No selected frame." |
| #test info files |
| gdb_test_no_output "info files" "info files" |
| #test info float |
| gdb_test "info float" "The program has no registers now." |
| #test info functions |
| gdb_test "info functions" "All defined functions:" |
| #test info locals |
| gdb_test "info locals" "No frame selected." |
| #test info program |
| gdb_test "info program" "The program being debugged is not being run." |
| #test info registers |
| gdb_test "info registers" "The program has no registers now." |
| #test info stack "s" abbreviation |
| gdb_test "info s" "No stack." "info stack \"s\" abbreviation" |
| #test info stack |
| gdb_test "info stack" "No stack." |
| #test info set |
| # Test improved to check three parts: |
| # 1) confirm |
| # 2) prompt |
| # 3) write |
| # And only succeed if all three are matched. |
| # This should fix an old problem on native solaris 2.8, |
| # where this test fails due to this line: |
| # prompt: Gdb's prompt is "(gdb) ".^M |
| set set_confirm_seen 0 |
| set set_prompt_seen 0 |
| gdb_test_multiple "info set" "info set" { |
| -re "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename: The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize: Number of source lines gdb will list by default is 10" { |
| verbose "Confirm dislayed" |
| set set_confirm_seen 1 |
| exp_continue |
| } |
| -re "Gdb's prompt is \"$gdb_prompt \"" { |
| verbose "GDB prompt displayed" |
| set set_prompt_seen 1 |
| exp_continue |
| } |
| -re "Writing into executable.*$gdb_prompt $" { |
| verbose "write displayed" |
| if { $set_prompt_seen && $set_confirm_seen } { |
| pass "info set" |
| } else { |
| verbose "prompt $set_prompt_seen confirm $set_confirm_seen" |
| fail "info set (incomplete output)" |
| } |
| } |
| } |
| gdb_test "info symbol" "Argument required .address.." |
| #test info source |
| gdb_test "info source" "No current source file..*" |
| #test info sources |
| gdb_test "info sources" "No symbol table is loaded. Use the \"file\" command.*" |
| #test info target |
| gdb_test_no_output "info target" "info target" |
| #test info terminal |
| gdb_test "info terminal" "No saved terminal information." |
| # test info threads |
| gdb_test "info threads" "No threads." |
| #test info types |
| gdb_test "info types" "All defined types:" |
| #test info variables |
| gdb_test "info variables" "All defined variables:" |
| #test info vector |
| gdb_test "info vector" "The program has no registers now." |
| #test info warranty |
| gdb_test "info warranty" "15. *Disclaimer of Warranty.*" |
| #test info watchpoints |
| gdb_test "info watchpoints" "No watchpoints." |
| #test inspect |
| gdb_test "inspect" "The history is empty." |
| #test jump |
| gdb_test "jump" "The program is not being run." |
| #test kill |
| gdb_test "kill" "The program is not being run." |
| #test list "l" abbreviation |
| gdb_test "l" "No symbol table is loaded. Use the \"file\" command.*" "list \"l\" abbreviation" |
| #test list |
| gdb_test "list" "No symbol table is loaded. Use the \"file\" command.*" |
| #test load |
| # The ``takes a file name'' case is for vxgdb. |
| # The ``Use the "file" command'' case is for newer GDB versions which try |
| # to deduce the filename from the exec file. |
| gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" |
| #test next "n" abbreviation |
| gdb_test "n" "The program is not being run." "next \"n\" abbreviation" |
| #test next |
| gdb_test "next" "The program is not being run." |
| #test nexti "ni" abbreviation |
| gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation" |
| #test nexti |
| gdb_test "nexti" "The program is not being run." |
| #test output |
| gdb_test "output" "Argument required .expression to compute.*" |
| |
| #test overlay |
| gdb_test "overlay" "List of overlay subcommands:.*" |
| #test a non-existant overlay subcommand |
| gdb_test "overlay on" "Undefined overlay command.* Try \"help overlay\"." |
| gdb_test_no_output "overlay manual" "overlay manual #1" |
| gdb_test_no_output "overlay auto" |
| gdb_test_no_output "overlay off" |
| gdb_test "overlay list" "No sections are mapped." |
| gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1" |
| gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #1" |
| gdb_test_no_output "overlay manual" "overlay manual #2" |
| gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2" |
| gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2" |
| |
| #test print "p" abbreviation |
| gdb_test "p" "The history is empty." "print \"p\" abbreviation" |
| #test print |
| gdb_test "print" "The history is empty." |
| #test printf |
| gdb_test "printf" "Argument required .format-control string and values to print.*" |
| #test ptype |
| gdb_test "ptype" "The history is empty." |
| #test pwd |
| gdb_test "pwd" "Working directory .*" |
| |
| #test run "r" abbreviation |
| if $use_gdb_stub { |
| # Only extended-remote supports "run". |
| } else { |
| gdb_test_multiple "r" "run \"r\" abbreviation" { |
| -re "Starting program: .*You can't do that when your target is `None'.*$gdb_prompt $"\ |
| { pass "run \"r\" abbreviation" } |
| -re "Starting program: .*No executable file specified.*Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ |
| { pass "run \"r\" abbreviation" } |
| -re "Starting program: .*No executable specified, use .target exec.\\..*$gdb_prompt $"\ |
| { pass "run \"r\" abbreviation" } |
| -re "Starting program: .*No image loaded into target.*$gdb_prompt $"\ |
| { pass "run \"r\" abbreviation" } |
| -re "Starting program: .*No program loaded.*$gdb_prompt $"\ |
| { pass "run \"r\" abbreviation" } |
| -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ |
| { pass "run \"r\" abbreviation" } |
| -re "Starting program: .*Running the default executable on the remote target failed; try \"set remote exec-file\"?.*$gdb_prompt $"\ |
| { pass "run \"r\" abbreviation" } |
| } |
| } |
| |
| #test run |
| if $use_gdb_stub { |
| # Only extended-remote supports "run". |
| } else { |
| gdb_test_multiple "run" "run" { |
| -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $"\ |
| { pass "run" } |
| -re "Starting program: .*No executable file specified.*Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ |
| { pass "run" } |
| -re "Starting program: .*No executable specified, use .target exec.\\..*$gdb_prompt $"\ |
| { pass "run" } |
| -re "Starting program: .*No image loaded into target.*$gdb_prompt $"\ |
| { pass "run" } |
| -re "Starting program: .*No program loaded.*$gdb_prompt $"\ |
| { pass "run" } |
| -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ |
| { pass "run" } |
| -re "Starting program: .*Running the default executable on the remote target failed; try \"set remote exec-file\"?.*$gdb_prompt $"\ |
| { pass "run" } |
| } |
| } |
| |
| #test rbreak |
| gdb_test "rbreak" "rbreak" |
| |
| # test restore |
| gdb_test "restore" "You can't do that without a process to debug\." |
| |
| #test return |
| # The middle case accomodated the obsolete a29k, where doing the "ni" |
| # above causes an initial stack to be created. |
| gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y" |
| |
| |
| #test reverse-search |
| gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" |
| #test step "s" abbreviation |
| gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1" |
| #test step |
| gdb_test "step" "The program is not being run." "step #1" |
| #test search |
| gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" |
| #test section |
| gdb_test "section" "Must specify section name and its virtual address.*" |
| #test set annotate |
| gdb_test "set annotate" "Argument required .integer to set it to.*" |
| #test set args |
| gdb_test_no_output "set args" "set args" |
| |
| # Test set check abbreviations |
| foreach x {"c" "ch" "check"} { |
| gdb_test "set $x" "List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set strict type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." \ |
| "set check \"$x\" abbreviation" |
| } |
| |
| #test set check range |
| gdb_test "set check range" ".*" |
| #test set check type |
| gdb_test "set check type" ".*" |
| #test set complaints |
| gdb_test "set complaints" "Argument required .integer to set it to.*" |
| #test set confirm |
| gdb_test_no_output "set confirm" "set confirm" |
| # Don't test set editing. What if we're talking to a gdb that |
| # won't do editing correctly while we're talking to it? |
| # gdb_test "set editing" "" "set editing" |
| |
| #test set environment |
| gdb_test "set environment" "Argument required .environment variable and value.*" |
| #test set height |
| gdb_test "set height" "Argument required .integer to set it to.*" |
| #test set history expansion |
| gdb_test_no_output "set history expansion" "set history expansion" |
| # Make sure the history ends up in the right place. |
| gdb_test_no_output "set history filename [standard_output_file .gdb_history]" \ |
| "set the history filename" |
| #test set history save |
| gdb_test_no_output "set history save" "set history save" |
| #test set history size |
| gdb_test "set history size" "Argument required .integer to set it to.*" |
| #test set history |
| gdb_test "set history" "List of set history subcommands:(\[^\r\n\]*\[\r\n\])+set history expansion -- Set history expansion on command input(\[^\r\n\]*\[\r\n\])+set history filename -- Set the filename in which to record the command history(\[^\r\n\]*\[\r\n\])+set history save -- Set saving of the history record on exit(\[^\r\n\]*\[\r\n\])+set history size -- Set the size of the command history(\[^\r\n\]*\[\r\n\])+Type \"help set history\" followed by set history subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." |
| #test set language |
| gdb_test "set language" "Requires an argument. Valid arguments are auto, local, unknown, ada, asm, c, c.., d, fortran, go, minimal, modula-2, objective-c, opencl, pascal, rust." |
| #test set listsize |
| gdb_test "set listsize" "Argument required .integer to set it to.*" |
| #test set print "p" abbreviation |
| gdb_test "set p" "List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation" |
| #test set print "pr" abbreviation |
| gdb_test "set pr" "List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation" |
| #test set print |
| gdb_test "set print" "List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." |
| #test set print address |
| gdb_test_no_output "set print address" "set print address" |
| #test set print array |
| gdb_test_no_output "set print array" "set print array" |
| #test set print asm-demangle |
| gdb_test_no_output "set print asm-demangle" "set print asm-demangle" |
| #test set print demangle |
| gdb_test_no_output "set print demangle" "set print demangle" |
| #test set print elements |
| gdb_test "set print elements" "Argument required .integer to set it to.*" |
| #test set print object |
| gdb_test_no_output "set print object" "set print object" |
| #test set print pretty |
| gdb_test_no_output "set print pretty" "set print pretty" |
| #test set print sevenbit-strings |
| gdb_test_no_output "set print sevenbit-strings" "set print sevenbit-strings" |
| #test set print union |
| gdb_test_no_output "set print union" "set print union" |
| #test set print vtbl |
| gdb_test_no_output "set print vtbl" "set print vtbl" |
| # FIXME -- need a test for "set prompt" |
| #test set radix |
| gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" |
| #test set variable |
| gdb_test "set variable" "Argument required .expression to compute.*" |
| #test set verbose |
| gdb_test_no_output "set verbose" "set verbose" |
| #test set width |
| gdb_test "set width" "Argument required .integer to set it to.*" |
| #test set write |
| # This is only supported on targets which use exec.o. |
| gdb_test_no_output "set write" "set write" |
| #test set |
| gdb_test "set" "Argument required .expression to compute.*" |
| #test shell echo Hi dad! |
| gdb_test "shell echo Hi dad!" "Hi dad!" |
| #test show annotate |
| gdb_test "show annotate" "Annotation_level is 0." |
| #test show args |
| gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." |
| |
| # test show check abbreviations |
| foreach x {"c" "ch" "check"} { |
| gdb_test "show $x" "check range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+check type: *Strict type checking is on\..*" \ |
| "show check \"$x\" abbreviation" |
| } |
| |
| #test show check range |
| gdb_test "show check range" "Range checking is \"auto; currently off\"." |
| #test show check type |
| gdb_test "show check type" "Strict type checking is on\." |
| #test show commands |
| gdb_test "show commands" ".*" |
| #test show complaints |
| gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." |
| #test show confirm |
| gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." |
| |
| #test show convenience |
| # This is trickier as there are multiple internal convenience vars and |
| # functions and we can't assume any particular order. |
| # And we have to handle the extra convenience funs provided by Python. |
| set show_conv_list \ |
| { \ |
| {$_sdata = void} \ |
| {$_siginfo = void} \ |
| {$_thread = 0} \ |
| {$_gthread = 0} \ |
| {$_inferior = 1} \ |
| {$_exception = <error: No frame selected>} \ |
| {$_probe_argc = <error: No frame selected>} \ |
| {$_probe_arg0 = <error: No frame selected>} \ |
| {$_probe_arg1 = <error: No frame selected>} \ |
| {$_probe_arg2 = <error: No frame selected>} \ |
| {$_probe_arg3 = <error: No frame selected>} \ |
| {$_probe_arg4 = <error: No frame selected>} \ |
| {$_probe_arg5 = <error: No frame selected>} \ |
| {$_probe_arg6 = <error: No frame selected>} \ |
| {$_probe_arg7 = <error: No frame selected>} \ |
| {$_probe_arg8 = <error: No frame selected>} \ |
| {$_probe_arg9 = <error: No frame selected>} \ |
| {$_probe_arg10 = <error: No frame selected>} \ |
| {$_probe_arg11 = <error: No frame selected>} \ |
| {$_cimag = <internal function _cimag>} \ |
| {$_creal = <internal function _creal>} \ |
| {$_isvoid = <internal function _isvoid>} \ |
| {$_gdb_maint_setting_str = <internal function _gdb_maint_setting_str>} \ |
| {$_gdb_maint_setting = <internal function _gdb_maint_setting>} \ |
| {$_gdb_setting_str = <internal function _gdb_setting_str>} \ |
| {$_gdb_setting = <internal function _gdb_setting>} \ |
| {$_gdb_major = 12} \ |
| {$_gdb_minor = 1} \ |
| {$_shell_exitsignal = void} \ |
| {$_shell_exitcode = 0} \ |
| } |
| if ![skip_python_tests] { |
| append show_conv_list \ |
| { |
| {$_memeq = <internal function _memeq>} \ |
| {$_regex = <internal function _regex>} \ |
| {$_streq = <internal function _streq>} \ |
| {$_strlen = <internal function _strlen>} \ |
| {$_as_string = <internal function _as_string>} \ |
| {$_caller_is = <internal function _caller_is>} \ |
| {$_caller_matches = <internal function _caller_matches>} \ |
| {$_any_caller_is = <internal function _any_caller_is>} \ |
| {$_any_caller_matches = <internal function _any_caller_matches>} \ |
| } |
| } |
| gdb_test_list_exact "show convenience" "show convenience" \ |
| "\[^\r\n\]+\[\r\n\]+" \ |
| "\[^\r\n\]+" \ |
| $show_conv_list |
| |
| #test show directories |
| gdb_test "show directories" "Source directories searched: .cdir\[:;\].cwd" |
| #test show editing |
| gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." |
| #test show height |
| gdb_test "show height" "Number of lines gdb thinks are in a page is.*" |
| #test show history expansion |
| gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" |
| #test show history filename |
| gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" |
| #test show history save |
| gdb_test "show history save" "Saving of the history record on exit is on." |
| #test show history size |
| gdb_test "show history size" "The size of the command history is.*" |
| #test show history |
| gdb_test "show history" "history expansion: *History expansion on command input is o(\[^\r\n\]*\[\r\n\])+history filename: *The filename in which to record the command history is.*.gdb_history(\[^\r\n\]*\[\r\n\])+history save: *Saving of the history record on exit is o(\[^\r\n\]*\[\r\n\])+history size: * The size of the command history is.*" |
| #test show language |
| gdb_test "show language" "The current source language is \"auto; currently c\"." |
| #test show listsize |
| gdb_test "show listsize" "Number of source lines gdb will list by default is 10." |
| #test show print "p" abbreviation |
| gdb_test "show p" ".*" |
| #test show print "pr" abbreviation |
| gdb_test "show pr" ".*" |
| #test show print |
| gdb_test "show print" ".*" |
| #test show paths |
| gdb_test "show paths" "Executable and object file path:.*" |
| #test show print address |
| gdb_test "show print address" "Printing of addresses is on." |
| #test show print array |
| gdb_test "show print array" "Pretty formatting of arrays is on." |
| #test show print asm-demangle |
| gdb_test "show print asm-demangle" "Demangling of C\[+\]+/ObjC names in disassembly listings is on." |
| #test show print demangle |
| gdb_test "show print demangle" "Demangling of encoded C\[+\]+/ObjC names when displaying symbols is on." |
| #test show print elements |
| gdb_test "show print elements" "Limit on string chars or array elements to print is 200." |
| #test show print object |
| gdb_test "show print object" "Printing of object's derived type based on vtable info is on." |
| #test show print pretty |
| gdb_test "show print pretty" "Pretty formatting of structures is on." |
| #test show print sevenbit-strings |
| gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." |
| #test show print union |
| gdb_test "show print union" "Printing of unions interior to structures is on." |
| #test show print vtbl |
| gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." |
| #test show prompt |
| # In the FAIL case, can't just look for $gdb_prompt because that will match |
| # the output, rather than the prompt. So look for $gdb_prompt at the start |
| # of a line. |
| gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" |
| #test show radix |
| gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." |
| #test show user |
| gdb_test_no_output "show user" "show user" |
| #test show values |
| gdb_test_no_output "show values" "show values" |
| #test show verbose |
| gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" |
| #test show version |
| gdb_test "show version" "GNU gdb \[0-9\.\]*(\[^\r\n\]*\[\r\n\])+Copyright \\(C\\) \[0-9\]* Free Software Foundation, Inc(\[^\r\n\]*\[\r\n\])+License GPLv3\\+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>(\[^\r\n\]*\[\r\n\])+This is free software: you are free to change and redistribute it.(\[^\r\n\]*\[\r\n\])+There is NO WARRANTY, to the extent permitted by law.(\[^\r\n\]*\[\r\n\])+Type \"show copying\" and \"show warranty\" for details..*" |
| #test show width |
| gdb_test "show width" "Number of characters gdb thinks are in a line is.*" |
| #test show write |
| # This is only supported on targets which use exec.o. |
| gdb_test "show write" "Writing into executable and core files is o.*" |
| #test show |
| set show_confirm_seen 0 |
| set show_prompt_seen 0 |
| gdb_test_multiple "show" "show" { |
| -re "confirm: *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename: *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save: *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size: *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize: *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements: *Limit on string chars or array elements to print is 200." { |
| verbose "Confirm dislayed" |
| set show_confirm_seen 1 |
| exp_continue |
| } |
| -re "Gdb's prompt is \"$gdb_prompt \"" { |
| verbose "GDB prompt displayed" |
| set show_prompt_seen 1 |
| exp_continue |
| } |
| -re "Writing into executable.*$gdb_prompt $" { |
| verbose "write displayed" |
| if { $show_prompt_seen && $show_confirm_seen } { |
| pass "show" |
| } else { |
| verbose "prompt $show_prompt_seen confirm $show_confirm_seen" |
| fail "show (incomplete output)" |
| } |
| } |
| } |
| #history saving should stay disabled |
| gdb_test_no_output "set history save off" "set history save off" |
| #test stepi "si" abbreviation |
| gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation" |
| #test stepi |
| gdb_test "stepi" "The program is not being run." |
| #test signal |
| gdb_test "signal" "The program is not being run." |
| #test source |
| gdb_test "source" "source command requires file name of file to source..*|No such file or directory.*" |
| #test step "s" abbreviation |
| gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2" |
| #test step |
| gdb_test "step" "The program is not being run." "step #2" |
| #test symbol-file |
| gdb_test "symbol-file" ".*" |
| |
| #test target native |
| gdb_test "target native" "Use the \"run\" command to start a process.*|Undefined target command: \"native\". *Try \"help target\".*" |
| |
| #test target core |
| send_gdb "target core\n" |
| gdb_expect { |
| -re "No core file specified..*$gdb_prompt $" { pass "target core" } |
| -re ".*A program is being debugged already. Kill it. .y or n.*$" { |
| send_gdb "n\n" |
| if $verbose>1 then { |
| send_user "\t\tDidn't kill program being debugged\n" |
| } |
| gdb_expect -re "$gdb_prompt $" { } |
| pass "target core" |
| } |
| -re "Undefined target command: \"core\". Try \"help target\"..*$gdb_prompt $" { pass "target core" } |
| -re ".*$gdb_prompt $" { fail "target core" } |
| timeout { fail "(timeout) target core" } |
| } |
| |
| #test target exec |
| send_gdb "target exec\n" |
| gdb_expect { |
| -re "No executable file now..*$gdb_prompt $"\ |
| { pass "target exec" } |
| -re ".*A program is being debugged already. Kill it. .y or n.*$" { |
| send_gdb "n\n" |
| if $verbose>1 then { |
| send_user "\t\tDidn't kill program being debugged\n" |
| } |
| gdb_expect -re "$gdb_prompt $" { } |
| pass "target exec" |
| } |
| -re ".*$gdb_prompt $" { fail "target exec" } |
| timeout { fail "(timeout) target exec" } |
| } |
| |
| #test target remote |
| send_gdb "target remote\n" |
| gdb_expect { |
| -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system.*.e.g. .*$gdb_prompt $"\ |
| { pass "target remote" } |
| -re ".*A program is being debugged already. Kill it. .y or n.*$" { |
| send_gdb "n\n" |
| if $verbose>1 then { |
| send_user "\t\tDidn't kill program being debugged\n" |
| } |
| gdb_expect -re "$gdb_prompt $" { } |
| pass "target remote" |
| } |
| -re ".*$gdb_prompt $" { fail "target remote" } |
| timeout { fail "(timeout) target remote" } |
| } |
| |
| #test target |
| gdb_test "target" "List of target subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help target\" followed by target subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." |
| #test tbreak |
| gdb_test "tbreak" "No default breakpoint address now." |
| #test thread |
| gdb_test "thread" "No thread selected" |
| #test thread apply |
| gdb_test "thread apply" "Please specify a thread ID list" |
| #test thread find |
| gdb_test "thread find" "Command requires an argument." |
| #test thread name |
| gdb_test "thread name" "No thread selected" |
| #test until "u" abbreviation |
| gdb_test "u" "The program is not being run." "until \"u\" abbreviation" |
| #test until |
| gdb_test "until" "The program is not being run." |
| #test undisplay |
| # FIXME -- need to dump full output to detailed log |
| |
| gdb_test "undisplay" \ |
| "" \ |
| "undisplay prompt" \ |
| "Delete all auto-display expressions.*y or n. $" \ |
| "y" |
| |
| #test unset environment |
| |
| gdb_test "unset environment" \ |
| "" \ |
| "unset environment prompt" \ |
| "Delete all environment variables?.*y or n. $" \ |
| "y" |
| |
| #test unset |
| gdb_test "unset" "List of unset subcommands:(\[^\r\n\]*\[\r\n\])+unset environment -- Cancel environment variable VAR for the program(\[^\r\n\]*\[\r\n\])+Type \"help unset\" followed by unset subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." |
| #test up |
| #test up-silently |
| gdb_test "up-silently" "No stack." |
| #test watch |
| gdb_test "watch" "Argument required .expression to compute.*" |
| #test whatis |
| gdb_test "whatis" "The history is empty." |
| #test where |
| gdb_test "where" "No stack." |
| #test x |
| gdb_test "x" "Argument required .starting display address.*" |
| |
| gdb_exit |
| |
| set timeout $prev_timeout |
