gdb/testsuite/gdb.base/foll-vfork.exp - binutils-gdb - Git at Google

 #   Copyright 1997-2021 Free Software Foundation, Inc.

 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.

 # Various tests of gdb's ability to follow the parent or child of a
 # Unix vfork system call.  A vfork parent is blocked until the child
 # either execs or exits --- since those events take somewhat different
 # code paths in GDB, both variants are exercised.

 # Until "set follow-fork-mode" and "catch vfork" are implemented on
 # other targets...
 #
 if {![istarget "*-linux*"]} then {
     continue
 }

 # Test relies on checking follow-fork output. Do not run if gdb debug is
 # enabled as it will be redirected to the log.
 if [gdb_debug_enabled] {
     untested "debug is enabled"
     return 0
 }

 standard_testfile

 set compile_options debug

 if {[build_executable $testfile.exp $testfile $srcfile $compile_options] == -1} {
     untested "failed to compile main testcase"
     return -1
 }

 set testfile2 "vforked-prog"
 set srcfile2 ${testfile2}.c

 if {[build_executable $testfile.exp $testfile2 $srcfile2 $compile_options] == -1} {
     untested "failed to compile secondary testcase"
     return -1
 }

 # A few of these tests require a little more time than the standard
 # timeout allows.
 set oldtimeout $timeout
 set timeout [expr "$timeout + 10"]

 # Start with a fresh GDB, with verbosity enabled, and run to main.  On
 # error, behave as "return", so we don't try to continue testing with
 # a borked session.
 proc setup_gdb {} {
     global testfile srcfile

     clean_restart $testfile

     if ![runto_main] {
 	return -code return
     }

     set tbreak_line [gdb_get_line_number " VFORK " $srcfile]
     gdb_test "tbreak ${tbreak_line}"
     gdb_continue_to_breakpoint ".*"
 }

 proc check_vfork_catchpoints {} {
   global gdb_prompt
   global has_vfork_catchpoints

   setup_gdb

   # Verify that the system supports "catch vfork".
   gdb_test "catch vfork" "Catchpoint \[0-9\]* \\(vfork\\)" "insert first vfork catchpoint"
   set has_vfork_catchpoints 0
   gdb_test_multiple "continue" "continue to first vfork catchpoint" {
     -re ".*Your system does not support this type\r\nof catchpoint.*$gdb_prompt $" {
       unsupported "continue to first vfork catchpoint"
     }
     -re ".*Catchpoint.*$gdb_prompt $" {
       set has_vfork_catchpoints 1
       pass "continue to first vfork catchpoint"
     }
   }

   if {$has_vfork_catchpoints == 0} {
     unsupported "vfork catchpoints"
     return -code return
   }
 }

 proc vfork_parent_follow_through_step {} {
   with_test_prefix "vfork parent follow, through step" {
    global gdb_prompt

    setup_gdb

    gdb_test_no_output "set follow-fork parent"

    set test "step"
    gdb_test_multiple "next" $test {
        -re "\\\[Detaching after vfork from.*if \\(pid == 0\\).*$gdb_prompt " {
 	   pass $test
        }
    }
    # The child has been detached; allow time for any output it might
    # generate to arrive, so that output doesn't get confused with
    # any gdb_expected debugger output from a subsequent testpoint.
    #
    exec sleep 1
 }}

 proc vfork_parent_follow_to_bp {} {
   with_test_prefix "vfork parent follow, to bp" {
    global gdb_prompt
    global srcfile

    setup_gdb

    gdb_test_no_output "set follow-fork parent"

    set bp_location [gdb_get_line_number "printf (\"I'm the proud parent of child"]
    gdb_test "break ${srcfile}:${bp_location}" ".*" "break, vfork to bp"

    set test "continue to bp"
    gdb_test_multiple "continue" $test {
        -re ".*\\\[Detaching after vfork from child process.*Breakpoint.*${bp_location}.*$gdb_prompt " {
 	   pass $test
        }
    }
    # The child has been detached; allow time for any output it might
    # generate to arrive, so that output doesn't get confused with
    # any expected debugger output from a subsequent testpoint.
    #
    exec sleep 1
 }}

 proc vfork_child_follow_to_exit {} {
   with_test_prefix "vfork child follow, to exit" {
    global gdb_prompt

    setup_gdb

    gdb_test_no_output "set follow-fork child"

    set test "continue to child exit"
    gdb_test_multiple "continue" $test {
       -re "Couldn't get registers.*$gdb_prompt " {
 	  # PR gdb/14766
 	  fail "$test"
       }
        -re "\\\[Attaching after.* vfork to.*\\\[Detaching vfork parent .* after child exit.*$gdb_prompt " {
 	  pass $test
       }
    }
    # The parent has been detached; allow time for any output it might
    # generate to arrive, so that output doesn't get confused with
    # any gdb_expected debugger output from a subsequent testpoint.
    #
    exec sleep 1
 }}

 proc vfork_and_exec_child_follow_to_main_bp {} {
   with_test_prefix "vfork and exec child follow, to main bp" {
    global gdb_prompt
    global srcfile2

    setup_gdb

    gdb_test_no_output "set follow-fork child"

    set linenum [gdb_get_line_number "printf(\"Hello from vforked-prog" ${srcfile2}]

    set test "continue to bp"
    gdb_test_multiple "continue" $test {
       -re "\\\[Attaching after.* vfork to.*\\\[Detaching vfork parent.*xecuting new program.*Breakpoint.*vforked-prog.c:${linenum}.*$gdb_prompt " {
 	  pass $test
       }
    }
    # The parent has been detached; allow time for any output it might
    # generate to arrive, so that output doesn't get confused with
    # any gdb_expected debugger output from a subsequent testpoint.
    #
    exec sleep 1
 }}

 proc vfork_and_exec_child_follow_through_step {} {
   with_test_prefix "vfork and exec child follow, through step" {
    global gdb_prompt
    global srcfile2

    setup_gdb

    gdb_test_no_output "set follow-fork child"

    set test "step over vfork"

    # The ideal support is to be able to debug the child even
    # before it execs.  Thus, "next" lands on the next line after
    # the vfork.
    gdb_test_multiple "next" $test {
        -re "\\\[Attaching after .* vfork to child.*if \\(pid == 0\\).*$gdb_prompt " {
 	   pass "$test"
        }
    }
    # The parent has been detached; allow time for any output it might
    # generate to arrive, so that output doesn't get confused with
    # any expected debugger output from a subsequent testpoint.
    #
    exec sleep 1
 }}

 proc continue_to_vfork {} {
    global gdb_prompt

    # A vfork catchpoint may stop in either "vfork" or "_vfork".
    set test "continue to vfork"
    gdb_test_multiple "continue" $test {
       -re "vfork \\(\\) at .*$gdb_prompt $" {
 	  pass $test
       }
       -re "0x\[0-9a-fA-F\]*.*(vfork|__kernel_v?syscall).*$gdb_prompt " {
 	  pass $test
       }
    }
 }

 proc tcatch_vfork_then_parent_follow {} {
   with_test_prefix "vfork parent follow, finish after tcatch vfork" {
    global gdb_prompt
    global srcfile

    setup_gdb

    gdb_test_no_output "set follow-fork parent"

    gdb_test "tcatch vfork" "Catchpoint .*(vfork).*"

    continue_to_vfork

    set linenum [gdb_get_line_number "pid = vfork ();"]
    set test "finish"
    gdb_test_multiple "finish" $test {
       -re "Run till exit from.*vfork.*0x\[0-9a-fA-F\]* in main .* at .*${srcfile}:${linenum}.*$gdb_prompt " {
 	  pass $test
       }
       -re "Run till exit from.*__kernel_v?syscall.*0x\[0-9a-fA-F\]* in vfork .*$gdb_prompt " {
 	  send_gdb "finish\n"
 	  exp_continue
       }
    }
    # The child has been detached; allow time for any output it might
    # generate to arrive, so that output doesn't get confused with
    # any expected debugger output from a subsequent testpoint.
    #
    exec sleep 1
 }}

 proc tcatch_vfork_then_child_follow_exec {} {
   with_test_prefix "vfork child follow, finish after tcatch vfork" {
    global gdb_prompt
    global srcfile
    global srcfile2

    setup_gdb

    gdb_test_no_output "set follow-fork child"

    gdb_test "tcatch vfork" "Catchpoint .*(vfork).*"

    continue_to_vfork

    set linenum1 [gdb_get_line_number "pid = vfork ();"]
    set linenum2 [gdb_get_line_number "printf(\"Hello from vforked-prog" ${srcfile2}]

    set test "finish"
    gdb_test_multiple "finish" $test {
       -re "Run till exit from.*vfork.*${srcfile}:${linenum1}.*$gdb_prompt " {
 	  pass $test
       }
       -re "Run till exit from.*__kernel_v?syscall.*0x\[0-9a-fA-F\]* in vfork .*$gdb_prompt " {
 	  send_gdb "finish\n"
 	  exp_continue
       }
       -re "Run till exit from.*vfork.*${srcfile2}:${linenum2}.*$gdb_prompt " {
 	  pass "$test (followed exec)"
       }
    }
    # The parent has been detached; allow time for any output it might
    # generate to arrive, so that output doesn't get confused with
    # any expected debugger output from a subsequent testpoint.
    #
    exec sleep 1
 }}

 proc tcatch_vfork_then_child_follow_exit {} {
   with_test_prefix "vfork child follow, finish after tcatch vfork" {
    global gdb_prompt
    global srcfile

    setup_gdb

    gdb_test_no_output "set follow-fork child"

    gdb_test "tcatch vfork" "Catchpoint .*(vfork).*"

    continue_to_vfork

    set test "finish"
    gdb_test_multiple "finish" $test {
       -re "Run till exit from.*vfork.*exited normally.*$gdb_prompt " {
 	  setup_kfail "gdb/14762" *-*-*
 	  fail $test
       }
       -re "Run till exit from.*vfork.*pid = vfork \\(\\).*$gdb_prompt " {
 	  pass $test
       }
       -re "Run till exit from.*__kernel_v?syscall.*0x\[0-9a-fA-F\]* in vfork .*$gdb_prompt " {
 	  send_gdb "finish\n"
 	  exp_continue
       }
    }
    # The parent has been detached; allow time for any output it might
    # generate to arrive, so that output doesn't get confused with
    # any expected debugger output from a subsequent testpoint.
    #
    exec sleep 1
 }}

 proc vfork_relations_in_info_inferiors { variant } {
   with_test_prefix "vfork relations in info inferiors" {
    global gdb_prompt

    setup_gdb

    gdb_test_no_output "set follow-fork child"

    set test "step over vfork"
    gdb_test_multiple "next" $test {
        -re "\\\[Attaching after .* vfork to child.*if \\(pid == 0\\).*$gdb_prompt " {
 	   pass "$test"
        }
    }

    gdb_test "info inferiors" \
        ".*is vfork parent of inferior 2.*is vfork child of inferior 1" \
        "info inferiors shows vfork parent/child relation"

    if { $variant == "exec" } {
        global srcfile2

        set linenum [gdb_get_line_number "printf(\"Hello from vforked-prog" ${srcfile2}]
        set test "continue to bp"
        gdb_test_multiple "continue" $test {
 	   -re ".*xecuting new program.*Breakpoint.*vforked-prog.c:${linenum}.*$gdb_prompt " {
 	       pass $test
 	   }
        }
    } else {
        set test "continue to child exit"
        gdb_test_multiple "continue" $test {
 	   -re "exited normally.*$gdb_prompt " {
 	       pass $test
 	   }
        }
    }

    set test "vfork relation no longer appears in info inferiors"
    gdb_test_multiple "info inferiors" $test {
        -re "is vfork child of inferior 1.*$gdb_prompt $" {
 	   fail $test
        }
        -re "is vfork parent of inferior 2.*$gdb_prompt $" {
 	   fail $test
        }
        -re "$gdb_prompt $" {
 	   pass $test
        }
    }
 }}

 proc do_vfork_and_follow_parent_tests {} {
    global gdb_prompt

    # Try following the parent process by stepping through a call to
    # vfork.  Do this without catchpoints.
    vfork_parent_follow_through_step

    # Try following the parent process by setting a breakpoint on the
    # other side of a vfork, and running to that point.  Do this
    # without catchpoints.
    vfork_parent_follow_to_bp

    # Try catching a vfork, and stepping out to the parent.
    #
    tcatch_vfork_then_parent_follow
 }

 proc do_vfork_and_follow_child_tests_exec {} {
    # Try following the child process by just continuing through the
    # vfork, and letting the parent's breakpoint on "main" be auto-
    # magically reset in the child.
    #
    vfork_and_exec_child_follow_to_main_bp

    # Try following the child process by stepping through a call to
    # vfork.  The child also executes an exec.  Since the child cannot
    # be debugged until after it has exec'd, and since there's a bp on
    # "main" in the parent, and since the bp's for the parent are
    # recomputed in the exec'd child, the step through a vfork should
    # land us in the "main" for the exec'd child, too.
    #
    vfork_and_exec_child_follow_through_step

    # Try catching a vfork, and stepping out to the child.
    #
    tcatch_vfork_then_child_follow_exec

    # Test the ability to follow both child and parent of a vfork.  Do
    # this without catchpoints.
    # ??rehrauer: NYI.  Will add testpoints here when implemented.
    #

    # Test the ability to have the debugger ask the user at vfork-time
    # whether to follow the parent, child or both.  Do this without
    # catchpoints.
    # ??rehrauer: NYI.  Will add testpoints here when implemented.
    #

    # Step over a vfork in the child, do "info inferiors" and check the
    # parent/child relation is displayed.  Run the child over the exec,
    # and confirm the relation is no longer displayed in "info
    # inferiors".
    #
    vfork_relations_in_info_inferiors "exec"
 }

 proc do_vfork_and_follow_child_tests_exit {} {
    # Try following the child process by just continuing through the
    # vfork, and letting the child exit.
    #
    vfork_child_follow_to_exit

    # Try catching a vfork, and stepping out to the child.
    #
    tcatch_vfork_then_child_follow_exit

    # Step over a vfork in the child, do "info inferiors" and check the
    # parent/child relation is displayed.  Run the child to completion,
    # and confirm the relation is no longer displayed in "info
    # inferiors".
    #
    vfork_relations_in_info_inferiors "exit"
 }

 with_test_prefix "check vfork support" {
     # Check that vfork catchpoints are supported, as an indicator for
     # whether vfork-following is supported.
     check_vfork_catchpoints
 }

 # Follow parent and follow child vfork tests with a child that execs.
 with_test_prefix "exec" {
     # These are tests of gdb's ability to follow the parent of a Unix
     # vfork system call.  The child will subsequently call a variant
     # of the Unix exec system call.
     do_vfork_and_follow_parent_tests

     # These are tests of gdb's ability to follow the child of a Unix
     # vfork system call.  The child will subsequently call a variant
     # of a Unix exec system call.
     #
     do_vfork_and_follow_child_tests_exec
 }

 # Switch to test the case of the child exiting.  We can't use
 # standard_testfile here because we don't want to overwrite the binary
 # of the previous tests.
 set testfile "foll-vfork-exit"
 set srcfile ${testfile}.c
 set binfile [standard_output_file ${testfile}]

 if {[build_executable $testfile.exp $testfile $srcfile] == -1} {
     untested "failed to build $testfile"
     return
 }

 # Follow parent and follow child vfork tests with a child that exits.
 with_test_prefix "exit" {
     # These are tests of gdb's ability to follow the parent of a Unix
     # vfork system call.  The child will subsequently exit.
     do_vfork_and_follow_parent_tests

     # These are tests of gdb's ability to follow the child of a Unix
     # vfork system call.  The child will subsequently exit.
     #
     do_vfork_and_follow_child_tests_exit
 }

 set timeout $oldtimeout
 return 0
	# Copyright 1997-2021 Free Software Foundation, Inc.

	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 3 of the License, or
	# (at your option) any later version.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program. If not, see <http://www.gnu.org/licenses/>.

	# Various tests of gdb's ability to follow the parent or child of a
	# Unix vfork system call. A vfork parent is blocked until the child
	# either execs or exits --- since those events take somewhat different
	# code paths in GDB, both variants are exercised.

	# Until "set follow-fork-mode" and "catch vfork" are implemented on
	# other targets...
	#
	if {![istarget "-linux"]} then {
	continue
	}

	# Test relies on checking follow-fork output. Do not run if gdb debug is
	# enabled as it will be redirected to the log.
	if [gdb_debug_enabled] {
	untested "debug is enabled"
	return 0
	}

	standard_testfile

	set compile_options debug

	if {[build_executable $testfile.exp $testfile $srcfile $compile_options] == -1} {
	untested "failed to compile main testcase"
	return -1
	}

	set testfile2 "vforked-prog"
	set srcfile2 ${testfile2}.c

	if {[build_executable $testfile.exp $testfile2 $srcfile2 $compile_options] == -1} {
	untested "failed to compile secondary testcase"
	return -1
	}

	# A few of these tests require a little more time than the standard
	# timeout allows.
	set oldtimeout $timeout
	set timeout [expr "$timeout + 10"]

	# Start with a fresh GDB, with verbosity enabled, and run to main. On
	# error, behave as "return", so we don't try to continue testing with
	# a borked session.
	proc setup_gdb {} {
	global testfile srcfile

	clean_restart $testfile

	if ![runto_main] {
	return -code return
	}

	set tbreak_line [gdb_get_line_number " VFORK " $srcfile]
	gdb_test "tbreak ${tbreak_line}"
	gdb_continue_to_breakpoint ".*"
	}

	proc check_vfork_catchpoints {} {
	global gdb_prompt
	global has_vfork_catchpoints

	setup_gdb

	# Verify that the system supports "catch vfork".
	gdb_test "catch vfork" "Catchpoint \[0-9\]* \\(vfork\\)" "insert first vfork catchpoint"
	set has_vfork_catchpoints 0
	gdb_test_multiple "continue" "continue to first vfork catchpoint" {
	-re ".Your system does not support this type\r\nof catchpoint.$gdb_prompt $" {
	unsupported "continue to first vfork catchpoint"
	}
	-re ".Catchpoint.$gdb_prompt $" {
	set has_vfork_catchpoints 1
	pass "continue to first vfork catchpoint"
	}
	}

	if {$has_vfork_catchpoints == 0} {
	unsupported "vfork catchpoints"
	return -code return
	}
	}

	proc vfork_parent_follow_through_step {} {
	with_test_prefix "vfork parent follow, through step" {
	global gdb_prompt

	setup_gdb

	gdb_test_no_output "set follow-fork parent"

	set test "step"
	gdb_test_multiple "next" $test {
	-re "\\\[Detaching after vfork from.if \\(pid == 0\\).$gdb_prompt " {
	pass $test
	}
	}
	# The child has been detached; allow time for any output it might
	# generate to arrive, so that output doesn't get confused with
	# any gdb_expected debugger output from a subsequent testpoint.
	#
	exec sleep 1
	}}

	proc vfork_parent_follow_to_bp {} {
	with_test_prefix "vfork parent follow, to bp" {
	global gdb_prompt
	global srcfile

	setup_gdb

	gdb_test_no_output "set follow-fork parent"

	set bp_location [gdb_get_line_number "printf (\"I'm the proud parent of child"]
	gdb_test "break ${srcfile}:${bp_location}" ".*" "break, vfork to bp"

	set test "continue to bp"
	gdb_test_multiple "continue" $test {
	-re ".\\\[Detaching after vfork from child process.Breakpoint.${bp_location}.$gdb_prompt " {
	pass $test
	}
	}
	# The child has been detached; allow time for any output it might
	# generate to arrive, so that output doesn't get confused with
	# any expected debugger output from a subsequent testpoint.
	#
	exec sleep 1
	}}

	proc vfork_child_follow_to_exit {} {
	with_test_prefix "vfork child follow, to exit" {
	global gdb_prompt

	setup_gdb

	gdb_test_no_output "set follow-fork child"

	set test "continue to child exit"
	gdb_test_multiple "continue" $test {
	-re "Couldn't get registers.*$gdb_prompt " {
	# PR gdb/14766
	fail "$test"
	}
	-re "\\\[Attaching after.* vfork to.\\\[Detaching vfork parent . after child exit.*$gdb_prompt " {
	pass $test
	}
	}
	# The parent has been detached; allow time for any output it might
	# generate to arrive, so that output doesn't get confused with
	# any gdb_expected debugger output from a subsequent testpoint.
	#
	exec sleep 1
	}}

	proc vfork_and_exec_child_follow_to_main_bp {} {
	with_test_prefix "vfork and exec child follow, to main bp" {
	global gdb_prompt
	global srcfile2

	setup_gdb

	gdb_test_no_output "set follow-fork child"

	set linenum [gdb_get_line_number "printf(\"Hello from vforked-prog" ${srcfile2}]

	set test "continue to bp"
	gdb_test_multiple "continue" $test {
	-re "\\\[Attaching after.* vfork to.\\\[Detaching vfork parent.xecuting new program.Breakpoint.vforked-prog.c:${linenum}.*$gdb_prompt " {
	pass $test
	}
	}
	# The parent has been detached; allow time for any output it might
	# generate to arrive, so that output doesn't get confused with
	# any gdb_expected debugger output from a subsequent testpoint.
	#
	exec sleep 1
	}}

	proc vfork_and_exec_child_follow_through_step {} {
	with_test_prefix "vfork and exec child follow, through step" {
	global gdb_prompt
	global srcfile2

	setup_gdb

	gdb_test_no_output "set follow-fork child"

	set test "step over vfork"

	# The ideal support is to be able to debug the child even
	# before it execs. Thus, "next" lands on the next line after
	# the vfork.
	gdb_test_multiple "next" $test {
	-re "\\\[Attaching after .* vfork to child.if \\(pid == 0\\).$gdb_prompt " {
	pass "$test"
	}
	}
	# The parent has been detached; allow time for any output it might
	# generate to arrive, so that output doesn't get confused with
	# any expected debugger output from a subsequent testpoint.
	#
	exec sleep 1
	}}

	proc continue_to_vfork {} {
	global gdb_prompt

	# A vfork catchpoint may stop in either "vfork" or "_vfork".
	set test "continue to vfork"
	gdb_test_multiple "continue" $test {
	-re "vfork \\(\\) at .*$gdb_prompt $" {
	pass $test
	}
	-re "0x\[0-9a-fA-F\].(vfork\|__kernel_v?syscall).*$gdb_prompt " {
	pass $test
	}
	}
	}

	proc tcatch_vfork_then_parent_follow {} {
	with_test_prefix "vfork parent follow, finish after tcatch vfork" {
	global gdb_prompt
	global srcfile

	setup_gdb

	gdb_test_no_output "set follow-fork parent"

	gdb_test "tcatch vfork" "Catchpoint .(vfork)."

	continue_to_vfork

	set linenum [gdb_get_line_number "pid = vfork ();"]
	set test "finish"
	gdb_test_multiple "finish" $test {
	-re "Run till exit from.vfork.0x\[0-9a-fA-F\]* in main .* at .${srcfile}:${linenum}.$gdb_prompt " {
	pass $test
	}
	-re "Run till exit from.__kernel_v?syscall.0x\[0-9a-fA-F\]* in vfork .*$gdb_prompt " {
	send_gdb "finish\n"
	exp_continue
	}
	}
	# The child has been detached; allow time for any output it might
	# generate to arrive, so that output doesn't get confused with
	# any expected debugger output from a subsequent testpoint.
	#
	exec sleep 1
	}}

	proc tcatch_vfork_then_child_follow_exec {} {
	with_test_prefix "vfork child follow, finish after tcatch vfork" {
	global gdb_prompt
	global srcfile
	global srcfile2

	setup_gdb

	gdb_test_no_output "set follow-fork child"

	gdb_test "tcatch vfork" "Catchpoint .(vfork)."

	continue_to_vfork

	set linenum1 [gdb_get_line_number "pid = vfork ();"]
	set linenum2 [gdb_get_line_number "printf(\"Hello from vforked-prog" ${srcfile2}]

	set test "finish"
	gdb_test_multiple "finish" $test {
	-re "Run till exit from.vfork.${srcfile}:${linenum1}.*$gdb_prompt " {
	pass $test
	}
	-re "Run till exit from.__kernel_v?syscall.0x\[0-9a-fA-F\]* in vfork .*$gdb_prompt " {
	send_gdb "finish\n"
	exp_continue
	}
	-re "Run till exit from.vfork.${srcfile2}:${linenum2}.*$gdb_prompt " {
	pass "$test (followed exec)"
	}
	}
	# The parent has been detached; allow time for any output it might
	# generate to arrive, so that output doesn't get confused with
	# any expected debugger output from a subsequent testpoint.
	#
	exec sleep 1
	}}

	proc tcatch_vfork_then_child_follow_exit {} {
	with_test_prefix "vfork child follow, finish after tcatch vfork" {
	global gdb_prompt
	global srcfile

	setup_gdb

	gdb_test_no_output "set follow-fork child"

	gdb_test "tcatch vfork" "Catchpoint .(vfork)."

	continue_to_vfork

	set test "finish"
	gdb_test_multiple "finish" $test {
	-re "Run till exit from.vfork.exited normally.*$gdb_prompt " {
	setup_kfail "gdb/14762" --*
	fail $test
	}
	-re "Run till exit from.vfork.pid = vfork \\(\\).*$gdb_prompt " {
	pass $test
	}
	-re "Run till exit from.__kernel_v?syscall.0x\[0-9a-fA-F\]* in vfork .*$gdb_prompt " {
	send_gdb "finish\n"
	exp_continue
	}
	}
	# The parent has been detached; allow time for any output it might
	# generate to arrive, so that output doesn't get confused with
	# any expected debugger output from a subsequent testpoint.
	#
	exec sleep 1
	}}

	proc vfork_relations_in_info_inferiors { variant } {
	with_test_prefix "vfork relations in info inferiors" {
	global gdb_prompt

	setup_gdb

	gdb_test_no_output "set follow-fork child"

	set test "step over vfork"
	gdb_test_multiple "next" $test {
	-re "\\\[Attaching after .* vfork to child.if \\(pid == 0\\).$gdb_prompt " {
	pass "$test"
	}
	}

	gdb_test "info inferiors" \
	".is vfork parent of inferior 2.is vfork child of inferior 1" \
	"info inferiors shows vfork parent/child relation"

	if { $variant == "exec" } {
	global srcfile2

	set linenum [gdb_get_line_number "printf(\"Hello from vforked-prog" ${srcfile2}]
	set test "continue to bp"
	gdb_test_multiple "continue" $test {
	-re ".xecuting new program.Breakpoint.vforked-prog.c:${linenum}.$gdb_prompt " {
	pass $test
	}
	}
	} else {
	set test "continue to child exit"
	gdb_test_multiple "continue" $test {
	-re "exited normally.*$gdb_prompt " {
	pass $test
	}
	}
	}

	set test "vfork relation no longer appears in info inferiors"
	gdb_test_multiple "info inferiors" $test {
	-re "is vfork child of inferior 1.*$gdb_prompt $" {
	fail $test
	}
	-re "is vfork parent of inferior 2.*$gdb_prompt $" {
	fail $test
	}
	-re "$gdb_prompt $" {
	pass $test
	}
	}
	}}

	proc do_vfork_and_follow_parent_tests {} {
	global gdb_prompt

	# Try following the parent process by stepping through a call to
	# vfork. Do this without catchpoints.
	vfork_parent_follow_through_step

	# Try following the parent process by setting a breakpoint on the
	# other side of a vfork, and running to that point. Do this
	# without catchpoints.
	vfork_parent_follow_to_bp

	# Try catching a vfork, and stepping out to the parent.
	#
	tcatch_vfork_then_parent_follow
	}

	proc do_vfork_and_follow_child_tests_exec {} {
	# Try following the child process by just continuing through the
	# vfork, and letting the parent's breakpoint on "main" be auto-
	# magically reset in the child.
	#
	vfork_and_exec_child_follow_to_main_bp

	# Try following the child process by stepping through a call to
	# vfork. The child also executes an exec. Since the child cannot
	# be debugged until after it has exec'd, and since there's a bp on
	# "main" in the parent, and since the bp's for the parent are
	# recomputed in the exec'd child, the step through a vfork should
	# land us in the "main" for the exec'd child, too.
	#
	vfork_and_exec_child_follow_through_step

	# Try catching a vfork, and stepping out to the child.
	#
	tcatch_vfork_then_child_follow_exec

	# Test the ability to follow both child and parent of a vfork. Do
	# this without catchpoints.
	# ??rehrauer: NYI. Will add testpoints here when implemented.
	#

	# Test the ability to have the debugger ask the user at vfork-time
	# whether to follow the parent, child or both. Do this without
	# catchpoints.
	# ??rehrauer: NYI. Will add testpoints here when implemented.
	#

	# Step over a vfork in the child, do "info inferiors" and check the
	# parent/child relation is displayed. Run the child over the exec,
	# and confirm the relation is no longer displayed in "info
	# inferiors".
	#
	vfork_relations_in_info_inferiors "exec"
	}

	proc do_vfork_and_follow_child_tests_exit {} {
	# Try following the child process by just continuing through the
	# vfork, and letting the child exit.
	#
	vfork_child_follow_to_exit

	# Try catching a vfork, and stepping out to the child.
	#
	tcatch_vfork_then_child_follow_exit

	# Step over a vfork in the child, do "info inferiors" and check the
	# parent/child relation is displayed. Run the child to completion,
	# and confirm the relation is no longer displayed in "info
	# inferiors".
	#
	vfork_relations_in_info_inferiors "exit"
	}

	with_test_prefix "check vfork support" {
	# Check that vfork catchpoints are supported, as an indicator for
	# whether vfork-following is supported.
	check_vfork_catchpoints
	}

	# Follow parent and follow child vfork tests with a child that execs.
	with_test_prefix "exec" {
	# These are tests of gdb's ability to follow the parent of a Unix
	# vfork system call. The child will subsequently call a variant
	# of the Unix exec system call.
	do_vfork_and_follow_parent_tests

	# These are tests of gdb's ability to follow the child of a Unix
	# vfork system call. The child will subsequently call a variant
	# of a Unix exec system call.
	#
	do_vfork_and_follow_child_tests_exec
	}

	# Switch to test the case of the child exiting. We can't use
	# standard_testfile here because we don't want to overwrite the binary
	# of the previous tests.
	set testfile "foll-vfork-exit"
	set srcfile ${testfile}.c
	set binfile [standard_output_file ${testfile}]

	if {[build_executable $testfile.exp $testfile $srcfile] == -1} {
	untested "failed to build $testfile"
	return
	}

	# Follow parent and follow child vfork tests with a child that exits.
	with_test_prefix "exit" {
	# These are tests of gdb's ability to follow the parent of a Unix
	# vfork system call. The child will subsequently exit.
	do_vfork_and_follow_parent_tests

	# These are tests of gdb's ability to follow the child of a Unix
	# vfork system call. The child will subsequently exit.
	#
	do_vfork_and_follow_child_tests_exit
	}

	set timeout $oldtimeout
	return 0