| # Copyright 1997-2021 Free Software Foundation, Inc. |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| # |
| # This file was written by Michael Snyder (msnyder@cygnus.com) |
| |
| # |
| # test running programs |
| # |
| |
| |
| set data_overlays 1 |
| |
| if [istarget "m32r-*-*"] then { |
| set linker_script "${srcdir}/${subdir}/m32r.ld" |
| } else { |
| verbose "Skipping overlay test -- not implemented for this target." |
| return |
| } |
| |
| if [istarget "*-*-linux*"] then { |
| verbose "Skipping overlay test -- Linux doesn't support overlayed programs." |
| return |
| } |
| |
| standard_testfile overlays.c ovlymgr.c foo.c bar.c baz.c grbx.c |
| |
| if {[build_executable $testfile.exp $testfile \ |
| [list $srcfile $srcfile2 $srcfile3 $srcfile4 $srcfile5 $srcfile6] \ |
| "debug ldscript=-Wl,-T$linker_script"] == -1} { |
| untested "failed to compile" |
| return -1 |
| } |
| |
| remote_exec build "mv ${testfile}.o foo.o bar.o baz.o grbx.o ovlymgr.o ${objdir}/${subdir}" |
| |
| |
| gdb_start |
| gdb_reinitialize_dir $srcdir/$subdir |
| gdb_load ${binfile} |
| |
| # |
| # set it up at a breakpoint so we can play with the variable values |
| # |
| |
| if ![runto_main] then { |
| return 0 |
| } |
| |
| # couple of convenience variables |
| set fptrcast [string_to_regexp "{int (int)}"] |
| set iptrcast [string_to_regexp "(int *)"] |
| set hexx "0x\[0-9abcdefABCDEF\]+" |
| |
| gdb_test_no_output "overlay manual" |
| gdb_test "overlay list" "No sections are mapped." "list with none mapped" |
| |
| # capture the LMA addresses of [foo bar baz grbx foox barx bazx grbxx] |
| |
| proc get_func_address { func func_sym msg } { |
| global gdb_prompt |
| global fptrcast |
| global hexx |
| |
| set func_addr 0 |
| send_gdb "print $func\n" |
| gdb_expect { |
| -re "\\$\[0-9\]+ = $fptrcast (${hexx}) <$func_sym>.*$gdb_prompt $" { |
| set func_addr $expect_out(1,string) |
| pass "get $msg" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "get $msg" |
| } |
| default { |
| fail "get $msg (timeout)" |
| } |
| } |
| return $func_addr |
| } |
| |
| set foo_lma [get_func_address "foo" "\\*foo\\*" "foo load address"] |
| set bar_lma [get_func_address "bar" "\\*bar\\*" "bar load address"] |
| set baz_lma [get_func_address "baz" "\\*baz\\*" "baz load address"] |
| set grbx_lma [get_func_address "grbx" "\\*grbx\\*" "grbx load address"] |
| |
| if $data_overlays then { |
| gdb_test "print \$foox_lma = &foox" \ |
| ".* $iptrcast 0x.*" "foox load addr" |
| gdb_test "print \$barx_lma = &barx" \ |
| ".* $iptrcast 0x.*" "barx load addr" |
| gdb_test "print \$bazx_lma = &bazx" \ |
| ".* $iptrcast 0x.*" "bazx load addr" |
| gdb_test "print \$grbxx_lma = &grbxx" \ |
| ".* $iptrcast 0x.*" "grbxx load addr" |
| } |
| |
| # map each overlay successively, and |
| # capture the VMA addresses of [foo bar baz grbx foox barx bazx grbxx] |
| |
| gdb_test "overlay map .ovly0" "" |
| gdb_test "overlay list" "Section .ovly0, loaded at.*, mapped at.*" "list ovly0" |
| set foo_vma [get_func_address "foo" "foo" "foo runtime address"] |
| |
| gdb_test "overlay map .ovly1" "" |
| gdb_test "overlay list" "Section .ovly1, loaded at.*, mapped at.*" "list ovly1" |
| set bar_vma [get_func_address "bar" "bar" "bar runtime address"] |
| |
| gdb_test "overlay map .ovly2" "" |
| gdb_test "overlay list" "Section .ovly2, loaded at.*, mapped at.*" "list ovly2" |
| set baz_vma [get_func_address "baz" "baz" "baz runtime address"] |
| |
| gdb_test "overlay map .ovly3" "" |
| gdb_test "overlay list" "Section .ovly3, loaded at.*, mapped at.*" "list ovly3" |
| set grbx_vma [get_func_address "grbx" "grbx" "grbx runtime address"] |
| |
| if $data_overlays then { |
| gdb_test "overlay map .data00" "" |
| gdb_test "overlay list" "Section .data00, loaded .*, mapped .*" "list data00" |
| gdb_test "print \$foox_vma = &foox" \ |
| ".* $iptrcast 0x.*" "foox runtime addr" |
| |
| gdb_test "overlay map .data01" "" |
| gdb_test "overlay list" "Section .data01, loaded .*, mapped .*" "list data01" |
| gdb_test "print \$barx_vma = &barx" \ |
| ".* $iptrcast 0x.*" "barx runtime addr" |
| |
| gdb_test "overlay map .data02" "" |
| gdb_test "overlay list" "Section .data02, loaded .*, mapped .*" "list data02" |
| gdb_test "print \$bazx_vma = &bazx" \ |
| ".* $iptrcast 0x.*" "bazx runtime addr" |
| |
| gdb_test "overlay map .data03" "" |
| gdb_test "overlay list" "Section .data03, loaded .*, mapped .*" "list data03" |
| gdb_test "print \$grbxx_vma = &grbxx" \ |
| ".* $iptrcast 0x.*" "grbxx runtime addr" |
| } |
| # Verify that LMA != VMA |
| |
| gdb_test "print $foo_lma != $foo_vma" ".* = 1" "foo's LMA != VMA" |
| gdb_test "print $bar_lma != $bar_vma" ".* = 1" "bar's LMA != VMA" |
| gdb_test "print $baz_lma != $baz_vma" ".* = 1" "baz's LMA != VMA" |
| gdb_test "print $grbx_lma != $grbx_vma" ".* = 1" "grbx's LMA != VMA" |
| if $data_overlays then { |
| gdb_test "print \$foox_lma != \$foox_vma" ".* = 1" "foox's LMA != VMA" |
| gdb_test "print \$barx_lma != \$barx_vma" ".* = 1" "barx's LMA != VMA" |
| gdb_test "print \$bazx_lma != \$bazx_vma" ".* = 1" "bazx's LMA != VMA" |
| gdb_test "print \$grbxx_lma != \$grbxx_vma" ".* = 1" "grbxx's LMA != VMA" |
| } |
| |
| # Verify that early-mapped overlays have been bumped out |
| # by later-mapped overlays layed over in the same VMA range. |
| |
| send_gdb "overlay list\n" |
| gdb_expect { |
| -re ".*ovly0, " { fail ".ovly0 not unmapped by .ovly1" } |
| -re ".*ovly2, " { fail ".ovly2 not unmapped by .ovly3" } |
| -re ".*data00," { fail ".data00 not unmapped by .data01" } |
| -re ".*data02," { fail ".data02 not unmapped by .data03" } |
| -re ".*$gdb_prompt $" { pass "automatic unmapping" } |
| timeout { fail "(timeout) Automatic unmapping" } |
| } |
| |
| # Verify that both sec1 and sec2 can be loaded simultaneously. |
| proc simultaneous_pair { sec1 sec2 } { |
| global gdb_prompt |
| |
| set pairname "$sec1 and $sec2 mapped simultaneously" |
| gdb_test "overlay map $sec1" "" "$pairname: map $sec1" |
| gdb_test "overlay map $sec2" "" "$pairname: map $sec2" |
| |
| set seen_sec1 0 |
| set seen_sec2 0 |
| |
| send_gdb "overlay list\n" |
| gdb_expect { |
| -re ".*[string_to_regexp $sec1], " { set seen_sec1 1; exp_continue } |
| -re ".*[string_to_regexp $sec2], " { set seen_sec2 1; exp_continue } |
| -re ".*$gdb_prompt $" { |
| if {$seen_sec1 && $seen_sec2} { |
| pass "$pairname" |
| } else { |
| fail "$pairname" |
| } |
| } |
| timeout { fail "(timeout) $pairname" } |
| } |
| } |
| |
| simultaneous_pair .ovly0 .ovly2 |
| simultaneous_pair .ovly0 .ovly3 |
| simultaneous_pair .ovly1 .ovly2 |
| simultaneous_pair .ovly1 .ovly3 |
| |
| if $data_overlays then { |
| simultaneous_pair .data00 .data02 |
| simultaneous_pair .data00 .data03 |
| simultaneous_pair .data01 .data02 |
| simultaneous_pair .data01 .data03 |
| } |
| |
| # test automatic mode |
| |
| gdb_test_no_output "overlay auto" |
| gdb_test "overlay list" "No sections are mapped." "list none mapped (auto)" |
| gdb_test "break foo" "Breakpoint .*at .*file .*foo.c.*" "break foo" |
| gdb_test "break bar" "Breakpoint .*at .*file .*bar.c.*" "break bar" |
| gdb_test "break baz" "Breakpoint .*at .*file .*baz.c.*" "break baz" |
| gdb_test "break grbx" "Breakpoint .*at .*file .*grbx.c.*" "break grbx" |
| |
| send_gdb "continue\n" |
| gdb_expect { |
| -re "Breakpoint .* foo .x=1. at .*$gdb_prompt $" { pass "hit foo" } |
| -re ".*$gdb_prompt $" { fail "hit foo" } |
| timeout { fail "(timeout) hit foo" } |
| } |
| |
| send_gdb "backtrace\n" |
| gdb_expect { |
| -re "#0 .*foo .*#1 .*main .*$gdb_prompt $" { pass "BT foo" } |
| -re ".*$gdb_prompt $" { fail "BT foo" } |
| timeout { fail "(timeout) BT foo" } |
| } |
| |
| |
| send_gdb "continue\n" |
| gdb_expect { |
| -re "Breakpoint .* bar .x=1. at .*$gdb_prompt $" { pass "hit bar" } |
| -re ".*$gdb_prompt $" { fail "hit bar" } |
| timeout { fail "(timeout) hit bar" } |
| } |
| |
| send_gdb "backtrace\n" |
| gdb_expect { |
| -re "#0 .*bar .*#1 .*main .*$gdb_prompt $" { pass "BT bar" } |
| -re ".*$gdb_prompt $" { fail "BT bar" } |
| timeout { fail "(timeout) BT bar" } |
| } |
| |
| send_gdb "continue\n" |
| gdb_expect { |
| -re "Breakpoint .* baz .x=1. at .*$gdb_prompt $" { pass "hit baz" } |
| -re ".*$gdb_prompt $" { fail "hit baz" } |
| timeout { fail "(timeout) hit baz" } |
| } |
| |
| send_gdb "backtrace\n" |
| gdb_expect { |
| -re "#0 .*baz .*#1 .*main .*$gdb_prompt $" { pass "BT baz" } |
| -re ".*$gdb_prompt $" { fail "BT baz" } |
| timeout { fail "(timeout) BT baz" } |
| } |
| |
| send_gdb "continue\n" |
| gdb_expect { |
| -re "Breakpoint .* grbx .x=1. at .*$gdb_prompt $" { pass "hit grbx" } |
| -re ".*$gdb_prompt $" { fail "hit grbx" } |
| timeout { fail "(timeout) hit grbx" } |
| } |
| |
| send_gdb "backtrace\n" |
| gdb_expect { |
| -re "#0 .*grbx .*#1 .*main .*$gdb_prompt $" { pass "BT grbx" } |
| -re ".*$gdb_prompt $" { fail "BT grbx" } |
| timeout { fail "(timeout) BT grbx" } |
| } |
| |
