| /* tc-arm.c -- Assemble for the ARM |
| Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
| Free Software Foundation, Inc. |
| Contributed by Richard Earnshaw (rwe@pegasus.esprit.ec.org) |
| Modified by David Taylor (dtaylor@armltd.co.uk) |
| Cirrus coprocessor mods by Aldy Hernandez (aldyh@redhat.com) |
| |
| This file is part of GAS, the GNU Assembler. |
| |
| GAS is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| |
| GAS is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GAS; see the file COPYING. If not, write to the Free |
| Software Foundation, 59 Temple Place - Suite 330, Boston, MA |
| 02111-1307, USA. */ |
| |
| #include <string.h> |
| #define NO_RELOC 0 |
| #include "as.h" |
| #include "safe-ctype.h" |
| |
| /* Need TARGET_CPU. */ |
| #include "config.h" |
| #include "subsegs.h" |
| #include "obstack.h" |
| #include "symbols.h" |
| #include "listing.h" |
| |
| #ifdef OBJ_ELF |
| #include "elf/arm.h" |
| #include "dwarf2dbg.h" |
| #endif |
| |
| /* XXX Set this to 1 after the next binutils release */ |
| #define WARN_DEPRECATED 0 |
| |
| /* The following bitmasks control CPU extensions: */ |
| #define ARM_EXT_V1 0x00000001 /* All processors (core set). */ |
| #define ARM_EXT_V2 0x00000002 /* Multiply instructions. */ |
| #define ARM_EXT_V2S 0x00000004 /* SWP instructions. */ |
| #define ARM_EXT_V3 0x00000008 /* MSR MRS. */ |
| #define ARM_EXT_V3M 0x00000010 /* Allow long multiplies. */ |
| #define ARM_EXT_V4 0x00000020 /* Allow half word loads. */ |
| #define ARM_EXT_V4T 0x00000040 /* Thumb v1. */ |
| #define ARM_EXT_V5 0x00000080 /* Allow CLZ, etc. */ |
| #define ARM_EXT_V5T 0x00000100 /* Thumb v2. */ |
| #define ARM_EXT_V5ExP 0x00000200 /* DSP core set. */ |
| #define ARM_EXT_V5E 0x00000400 /* DSP Double transfers. */ |
| #define ARM_EXT_V5J 0x00000800 /* Jazelle extension. */ |
| |
| /* Co-processor space extensions. */ |
| #define ARM_CEXT_XSCALE 0x00800000 /* Allow MIA etc. */ |
| #define ARM_CEXT_MAVERICK 0x00400000 /* Use Cirrus/DSP coprocessor. */ |
| |
| /* Architectures are the sum of the base and extensions. The ARM ARM (rev E) |
| defines the following: ARMv3, ARMv3M, ARMv4xM, ARMv4, ARMv4TxM, ARMv4T, |
| ARMv5xM, ARMv5, ARMv5TxM, ARMv5T, ARMv5TExP, ARMv5TE. To these we add |
| three more to cover cores prior to ARM6. Finally, there are cores which |
| implement further extensions in the co-processor space. */ |
| #define ARM_ARCH_V1 ARM_EXT_V1 |
| #define ARM_ARCH_V2 (ARM_ARCH_V1 | ARM_EXT_V2) |
| #define ARM_ARCH_V2S (ARM_ARCH_V2 | ARM_EXT_V2S) |
| #define ARM_ARCH_V3 (ARM_ARCH_V2S | ARM_EXT_V3) |
| #define ARM_ARCH_V3M (ARM_ARCH_V3 | ARM_EXT_V3M) |
| #define ARM_ARCH_V4xM (ARM_ARCH_V3 | ARM_EXT_V4) |
| #define ARM_ARCH_V4 (ARM_ARCH_V3M | ARM_EXT_V4) |
| #define ARM_ARCH_V4TxM (ARM_ARCH_V4xM | ARM_EXT_V4T) |
| #define ARM_ARCH_V4T (ARM_ARCH_V4 | ARM_EXT_V4T) |
| #define ARM_ARCH_V5xM (ARM_ARCH_V4xM | ARM_EXT_V5) |
| #define ARM_ARCH_V5 (ARM_ARCH_V4 | ARM_EXT_V5) |
| #define ARM_ARCH_V5TxM (ARM_ARCH_V5xM | ARM_EXT_V4T | ARM_EXT_V5T) |
| #define ARM_ARCH_V5T (ARM_ARCH_V5 | ARM_EXT_V4T | ARM_EXT_V5T) |
| #define ARM_ARCH_V5TExP (ARM_ARCH_V5T | ARM_EXT_V5ExP) |
| #define ARM_ARCH_V5TE (ARM_ARCH_V5TExP | ARM_EXT_V5E) |
| #define ARM_ARCH_V5TEJ (ARM_ARCH_V5TE | ARM_EXT_V5J) |
| |
| /* Processors with specific extensions in the co-processor space. */ |
| #define ARM_ARCH_XSCALE (ARM_ARCH_V5TE | ARM_CEXT_XSCALE) |
| |
| /* Some useful combinations: */ |
| #define ARM_ANY 0x0000ffff /* Any basic core. */ |
| #define ARM_ALL 0x00ffffff /* Any core + co-processor */ |
| #define CPROC_ANY 0x00ff0000 /* Any co-processor */ |
| #define FPU_ANY 0xff000000 /* Note this is ~ARM_ALL. */ |
| |
| |
| #define FPU_FPA_EXT_V1 0x80000000 /* Base FPA instruction set. */ |
| #define FPU_FPA_EXT_V2 0x40000000 /* LFM/SFM. */ |
| #define FPU_VFP_EXT_NONE 0x20000000 /* Use VFP word-ordering. */ |
| #define FPU_VFP_EXT_V1xD 0x10000000 /* Base VFP instruction set. */ |
| #define FPU_VFP_EXT_V1 0x08000000 /* Double-precision insns. */ |
| #define FPU_VFP_EXT_V2 0x04000000 /* ARM10E VFPr1. */ |
| #define FPU_NONE 0 |
| |
| #define FPU_ARCH_FPE FPU_FPA_EXT_V1 |
| #define FPU_ARCH_FPA (FPU_ARCH_FPE | FPU_FPA_EXT_V2) |
| |
| #define FPU_ARCH_VFP FPU_VFP_EXT_NONE |
| #define FPU_ARCH_VFP_V1xD (FPU_VFP_EXT_V1xD | FPU_VFP_EXT_NONE) |
| #define FPU_ARCH_VFP_V1 (FPU_ARCH_VFP_V1xD | FPU_VFP_EXT_V1) |
| #define FPU_ARCH_VFP_V2 (FPU_ARCH_VFP_V1 | FPU_VFP_EXT_V2) |
| |
| /* Types of processor to assemble for. */ |
| #define ARM_1 ARM_ARCH_V1 |
| #define ARM_2 ARM_ARCH_V2 |
| #define ARM_3 ARM_ARCH_V2S |
| #define ARM_250 ARM_ARCH_V2S |
| #define ARM_6 ARM_ARCH_V3 |
| #define ARM_7 ARM_ARCH_V3 |
| #define ARM_8 ARM_ARCH_V4 |
| #define ARM_9 ARM_ARCH_V4T |
| #define ARM_STRONG ARM_ARCH_V4 |
| #define ARM_CPU_MASK 0x0000000f /* XXX? */ |
| |
| #ifndef CPU_DEFAULT |
| #if defined __XSCALE__ |
| #define CPU_DEFAULT (ARM_ARCH_XSCALE) |
| #else |
| #if defined __thumb__ |
| #define CPU_DEFAULT (ARM_ARCH_V5T) |
| #else |
| #define CPU_DEFAULT ARM_ANY |
| #endif |
| #endif |
| #endif |
| |
| /* For backwards compatibility we default to the FPA. */ |
| #ifndef FPU_DEFAULT |
| #define FPU_DEFAULT FPU_ARCH_FPA |
| #endif |
| |
| #define streq(a, b) (strcmp (a, b) == 0) |
| #define skip_whitespace(str) while (*(str) == ' ') ++(str) |
| |
| static unsigned long cpu_variant; |
| static int target_oabi = 0; |
| |
| /* Flags stored in private area of BFD structure. */ |
| static int uses_apcs_26 = FALSE; |
| static int atpcs = FALSE; |
| static int support_interwork = FALSE; |
| static int uses_apcs_float = FALSE; |
| static int pic_code = FALSE; |
| |
| /* Variables that we set while parsing command-line options. Once all |
| options have been read we re-process these values to set the real |
| assembly flags. */ |
| static int legacy_cpu = -1; |
| static int legacy_fpu = -1; |
| |
| static int mcpu_cpu_opt = -1; |
| static int mcpu_fpu_opt = -1; |
| static int march_cpu_opt = -1; |
| static int march_fpu_opt = -1; |
| static int mfpu_opt = -1; |
| |
| /* This array holds the chars that always start a comment. If the |
| pre-processor is disabled, these aren't very useful. */ |
| const char comment_chars[] = "@"; |
| |
| /* This array holds the chars that only start a comment at the beginning of |
| a line. If the line seems to have the form '# 123 filename' |
| .line and .file directives will appear in the pre-processed output. */ |
| /* Note that input_file.c hand checks for '#' at the beginning of the |
| first line of the input file. This is because the compiler outputs |
| #NO_APP at the beginning of its output. */ |
| /* Also note that comments like this one will always work. */ |
| const char line_comment_chars[] = "#"; |
| |
| const char line_separator_chars[] = ";"; |
| |
| /* Chars that can be used to separate mant |
| from exp in floating point numbers. */ |
| const char EXP_CHARS[] = "eE"; |
| |
| /* Chars that mean this number is a floating point constant. */ |
| /* As in 0f12.456 */ |
| /* or 0d1.2345e12 */ |
| |
| const char FLT_CHARS[] = "rRsSfFdDxXeEpP"; |
| |
| /* Prefix characters that indicate the start of an immediate |
| value. */ |
| #define is_immediate_prefix(C) ((C) == '#' || (C) == '$') |
| |
| #ifdef OBJ_ELF |
| /* Pre-defined "_GLOBAL_OFFSET_TABLE_" */ |
| symbolS * GOT_symbol; |
| #endif |
| |
| /* Size of relocation record. */ |
| const int md_reloc_size = 8; |
| |
| /* 0: assemble for ARM, |
| 1: assemble for Thumb, |
| 2: assemble for Thumb even though target CPU does not support thumb |
| instructions. */ |
| static int thumb_mode = 0; |
| |
| typedef struct arm_fix |
| { |
| int thumb_mode; |
| } arm_fix_data; |
| |
| struct arm_it |
| { |
| const char * error; |
| unsigned long instruction; |
| int size; |
| struct |
| { |
| bfd_reloc_code_real_type type; |
| expressionS exp; |
| int pc_rel; |
| } reloc; |
| }; |
| |
| struct arm_it inst; |
| |
| enum asm_shift_index |
| { |
| SHIFT_LSL = 0, |
| SHIFT_LSR, |
| SHIFT_ASR, |
| SHIFT_ROR, |
| SHIFT_RRX |
| }; |
| |
| struct asm_shift_properties |
| { |
| enum asm_shift_index index; |
| unsigned long bit_field; |
| unsigned int allows_0 : 1; |
| unsigned int allows_32 : 1; |
| }; |
| |
| static const struct asm_shift_properties shift_properties [] = |
| { |
| { SHIFT_LSL, 0, 1, 0}, |
| { SHIFT_LSR, 0x20, 0, 1}, |
| { SHIFT_ASR, 0x40, 0, 1}, |
| { SHIFT_ROR, 0x60, 0, 0}, |
| { SHIFT_RRX, 0x60, 0, 0} |
| }; |
| |
| struct asm_shift_name |
| { |
| const char * name; |
| const struct asm_shift_properties * properties; |
| }; |
| |
| static const struct asm_shift_name shift_names [] = |
| { |
| { "asl", shift_properties + SHIFT_LSL }, |
| { "lsl", shift_properties + SHIFT_LSL }, |
| { "lsr", shift_properties + SHIFT_LSR }, |
| { "asr", shift_properties + SHIFT_ASR }, |
| { "ror", shift_properties + SHIFT_ROR }, |
| { "rrx", shift_properties + SHIFT_RRX }, |
| { "ASL", shift_properties + SHIFT_LSL }, |
| { "LSL", shift_properties + SHIFT_LSL }, |
| { "LSR", shift_properties + SHIFT_LSR }, |
| { "ASR", shift_properties + SHIFT_ASR }, |
| { "ROR", shift_properties + SHIFT_ROR }, |
| { "RRX", shift_properties + SHIFT_RRX } |
| }; |
| |
| #define NO_SHIFT_RESTRICT 1 |
| #define SHIFT_RESTRICT 0 |
| |
| #define NUM_FLOAT_VALS 8 |
| |
| const char * fp_const[] = |
| { |
| "0.0", "1.0", "2.0", "3.0", "4.0", "5.0", "0.5", "10.0", 0 |
| }; |
| |
| /* Number of littlenums required to hold an extended precision number. */ |
| #define MAX_LITTLENUMS 6 |
| |
| LITTLENUM_TYPE fp_values[NUM_FLOAT_VALS][MAX_LITTLENUMS]; |
| |
| #define FAIL (-1) |
| #define SUCCESS (0) |
| |
| /* Whether a Co-processor load/store operation accepts write-back forms. */ |
| #define CP_WB_OK 1 |
| #define CP_NO_WB 0 |
| |
| #define SUFF_S 1 |
| #define SUFF_D 2 |
| #define SUFF_E 3 |
| #define SUFF_P 4 |
| |
| #define CP_T_X 0x00008000 |
| #define CP_T_Y 0x00400000 |
| #define CP_T_Pre 0x01000000 |
| #define CP_T_UD 0x00800000 |
| #define CP_T_WB 0x00200000 |
| |
| #define CONDS_BIT 0x00100000 |
| #define LOAD_BIT 0x00100000 |
| |
| #define DOUBLE_LOAD_FLAG 0x00000001 |
| |
| struct asm_cond |
| { |
| const char * template; |
| unsigned long value; |
| }; |
| |
| #define COND_ALWAYS 0xe0000000 |
| #define COND_MASK 0xf0000000 |
| |
| static const struct asm_cond conds[] = |
| { |
| {"eq", 0x00000000}, |
| {"ne", 0x10000000}, |
| {"cs", 0x20000000}, {"hs", 0x20000000}, |
| {"cc", 0x30000000}, {"ul", 0x30000000}, {"lo", 0x30000000}, |
| {"mi", 0x40000000}, |
| {"pl", 0x50000000}, |
| {"vs", 0x60000000}, |
| {"vc", 0x70000000}, |
| {"hi", 0x80000000}, |
| {"ls", 0x90000000}, |
| {"ge", 0xa0000000}, |
| {"lt", 0xb0000000}, |
| {"gt", 0xc0000000}, |
| {"le", 0xd0000000}, |
| {"al", 0xe0000000}, |
| {"nv", 0xf0000000} |
| }; |
| |
| struct asm_psr |
| { |
| const char *template; |
| bfd_boolean cpsr; |
| unsigned long field; |
| }; |
| |
| /* The bit that distnguishes CPSR and SPSR. */ |
| #define SPSR_BIT (1 << 22) |
| |
| /* How many bits to shift the PSR_xxx bits up by. */ |
| #define PSR_SHIFT 16 |
| |
| #define PSR_c (1 << 0) |
| #define PSR_x (1 << 1) |
| #define PSR_s (1 << 2) |
| #define PSR_f (1 << 3) |
| |
| static const struct asm_psr psrs[] = |
| { |
| {"CPSR", TRUE, PSR_c | PSR_f}, |
| {"CPSR_all", TRUE, PSR_c | PSR_f}, |
| {"SPSR", FALSE, PSR_c | PSR_f}, |
| {"SPSR_all", FALSE, PSR_c | PSR_f}, |
| {"CPSR_flg", TRUE, PSR_f}, |
| {"CPSR_f", TRUE, PSR_f}, |
| {"SPSR_flg", FALSE, PSR_f}, |
| {"SPSR_f", FALSE, PSR_f}, |
| {"CPSR_c", TRUE, PSR_c}, |
| {"CPSR_ctl", TRUE, PSR_c}, |
| {"SPSR_c", FALSE, PSR_c}, |
| {"SPSR_ctl", FALSE, PSR_c}, |
| {"CPSR_x", TRUE, PSR_x}, |
| {"CPSR_s", TRUE, PSR_s}, |
| {"SPSR_x", FALSE, PSR_x}, |
| {"SPSR_s", FALSE, PSR_s}, |
| /* Combinations of flags. */ |
| {"CPSR_fs", TRUE, PSR_f | PSR_s}, |
| {"CPSR_fx", TRUE, PSR_f | PSR_x}, |
| {"CPSR_fc", TRUE, PSR_f | PSR_c}, |
| {"CPSR_sf", TRUE, PSR_s | PSR_f}, |
| {"CPSR_sx", TRUE, PSR_s | PSR_x}, |
| {"CPSR_sc", TRUE, PSR_s | PSR_c}, |
| {"CPSR_xf", TRUE, PSR_x | PSR_f}, |
| {"CPSR_xs", TRUE, PSR_x | PSR_s}, |
| {"CPSR_xc", TRUE, PSR_x | PSR_c}, |
| {"CPSR_cf", TRUE, PSR_c | PSR_f}, |
| {"CPSR_cs", TRUE, PSR_c | PSR_s}, |
| {"CPSR_cx", TRUE, PSR_c | PSR_x}, |
| {"CPSR_fsx", TRUE, PSR_f | PSR_s | PSR_x}, |
| {"CPSR_fsc", TRUE, PSR_f | PSR_s | PSR_c}, |
| {"CPSR_fxs", TRUE, PSR_f | PSR_x | PSR_s}, |
| {"CPSR_fxc", TRUE, PSR_f | PSR_x | PSR_c}, |
| {"CPSR_fcs", TRUE, PSR_f | PSR_c | PSR_s}, |
| {"CPSR_fcx", TRUE, PSR_f | PSR_c | PSR_x}, |
| {"CPSR_sfx", TRUE, PSR_s | PSR_f | PSR_x}, |
| {"CPSR_sfc", TRUE, PSR_s | PSR_f | PSR_c}, |
| {"CPSR_sxf", TRUE, PSR_s | PSR_x | PSR_f}, |
| {"CPSR_sxc", TRUE, PSR_s | PSR_x | PSR_c}, |
| {"CPSR_scf", TRUE, PSR_s | PSR_c | PSR_f}, |
| {"CPSR_scx", TRUE, PSR_s | PSR_c | PSR_x}, |
| {"CPSR_xfs", TRUE, PSR_x | PSR_f | PSR_s}, |
| {"CPSR_xfc", TRUE, PSR_x | PSR_f | PSR_c}, |
| {"CPSR_xsf", TRUE, PSR_x | PSR_s | PSR_f}, |
| {"CPSR_xsc", TRUE, PSR_x | PSR_s | PSR_c}, |
| {"CPSR_xcf", TRUE, PSR_x | PSR_c | PSR_f}, |
| {"CPSR_xcs", TRUE, PSR_x | PSR_c | PSR_s}, |
| {"CPSR_cfs", TRUE, PSR_c | PSR_f | PSR_s}, |
| {"CPSR_cfx", TRUE, PSR_c | PSR_f | PSR_x}, |
| {"CPSR_csf", TRUE, PSR_c | PSR_s | PSR_f}, |
| {"CPSR_csx", TRUE, PSR_c | PSR_s | PSR_x}, |
| {"CPSR_cxf", TRUE, PSR_c | PSR_x | PSR_f}, |
| {"CPSR_cxs", TRUE, PSR_c | PSR_x | PSR_s}, |
| {"CPSR_fsxc", TRUE, PSR_f | PSR_s | PSR_x | PSR_c}, |
| {"CPSR_fscx", TRUE, PSR_f | PSR_s | PSR_c | PSR_x}, |
| {"CPSR_fxsc", TRUE, PSR_f | PSR_x | PSR_s | PSR_c}, |
| {"CPSR_fxcs", TRUE, PSR_f | PSR_x | PSR_c | PSR_s}, |
| {"CPSR_fcsx", TRUE, PSR_f | PSR_c | PSR_s | PSR_x}, |
| {"CPSR_fcxs", TRUE, PSR_f | PSR_c | PSR_x | PSR_s}, |
| {"CPSR_sfxc", TRUE, PSR_s | PSR_f | PSR_x | PSR_c}, |
| {"CPSR_sfcx", TRUE, PSR_s | PSR_f | PSR_c | PSR_x}, |
| {"CPSR_sxfc", TRUE, PSR_s | PSR_x | PSR_f | PSR_c}, |
| {"CPSR_sxcf", TRUE, PSR_s | PSR_x | PSR_c | PSR_f}, |
| {"CPSR_scfx", TRUE, PSR_s | PSR_c | PSR_f | PSR_x}, |
| {"CPSR_scxf", TRUE, PSR_s | PSR_c | PSR_x | PSR_f}, |
| {"CPSR_xfsc", TRUE, PSR_x | PSR_f | PSR_s | PSR_c}, |
| {"CPSR_xfcs", TRUE, PSR_x | PSR_f | PSR_c | PSR_s}, |
| {"CPSR_xsfc", TRUE, PSR_x | PSR_s | PSR_f | PSR_c}, |
| {"CPSR_xscf", TRUE, PSR_x | PSR_s | PSR_c | PSR_f}, |
| {"CPSR_xcfs", TRUE, PSR_x | PSR_c | PSR_f | PSR_s}, |
| {"CPSR_xcsf", TRUE, PSR_x | PSR_c | PSR_s | PSR_f}, |
| {"CPSR_cfsx", TRUE, PSR_c | PSR_f | PSR_s | PSR_x}, |
| {"CPSR_cfxs", TRUE, PSR_c | PSR_f | PSR_x | PSR_s}, |
| {"CPSR_csfx", TRUE, PSR_c | PSR_s | PSR_f | PSR_x}, |
| {"CPSR_csxf", TRUE, PSR_c | PSR_s | PSR_x | PSR_f}, |
| {"CPSR_cxfs", TRUE, PSR_c | PSR_x | PSR_f | PSR_s}, |
| {"CPSR_cxsf", TRUE, PSR_c | PSR_x | PSR_s | PSR_f}, |
| {"SPSR_fs", FALSE, PSR_f | PSR_s}, |
| {"SPSR_fx", FALSE, PSR_f | PSR_x}, |
| {"SPSR_fc", FALSE, PSR_f | PSR_c}, |
| {"SPSR_sf", FALSE, PSR_s | PSR_f}, |
| {"SPSR_sx", FALSE, PSR_s | PSR_x}, |
| {"SPSR_sc", FALSE, PSR_s | PSR_c}, |
| {"SPSR_xf", FALSE, PSR_x | PSR_f}, |
| {"SPSR_xs", FALSE, PSR_x | PSR_s}, |
| {"SPSR_xc", FALSE, PSR_x | PSR_c}, |
| {"SPSR_cf", FALSE, PSR_c | PSR_f}, |
| {"SPSR_cs", FALSE, PSR_c | PSR_s}, |
| {"SPSR_cx", FALSE, PSR_c | PSR_x}, |
| {"SPSR_fsx", FALSE, PSR_f | PSR_s | PSR_x}, |
| {"SPSR_fsc", FALSE, PSR_f | PSR_s | PSR_c}, |
| {"SPSR_fxs", FALSE, PSR_f | PSR_x | PSR_s}, |
| {"SPSR_fxc", FALSE, PSR_f | PSR_x | PSR_c}, |
| {"SPSR_fcs", FALSE, PSR_f | PSR_c | PSR_s}, |
| {"SPSR_fcx", FALSE, PSR_f | PSR_c | PSR_x}, |
| {"SPSR_sfx", FALSE, PSR_s | PSR_f | PSR_x}, |
| {"SPSR_sfc", FALSE, PSR_s | PSR_f | PSR_c}, |
| {"SPSR_sxf", FALSE, PSR_s | PSR_x | PSR_f}, |
| {"SPSR_sxc", FALSE, PSR_s | PSR_x | PSR_c}, |
| {"SPSR_scf", FALSE, PSR_s | PSR_c | PSR_f}, |
| {"SPSR_scx", FALSE, PSR_s | PSR_c | PSR_x}, |
| {"SPSR_xfs", FALSE, PSR_x | PSR_f | PSR_s}, |
| {"SPSR_xfc", FALSE, PSR_x | PSR_f | PSR_c}, |
| {"SPSR_xsf", FALSE, PSR_x | PSR_s | PSR_f}, |
| {"SPSR_xsc", FALSE, PSR_x | PSR_s | PSR_c}, |
| {"SPSR_xcf", FALSE, PSR_x | PSR_c | PSR_f}, |
| {"SPSR_xcs", FALSE, PSR_x | PSR_c | PSR_s}, |
| {"SPSR_cfs", FALSE, PSR_c | PSR_f | PSR_s}, |
| {"SPSR_cfx", FALSE, PSR_c | PSR_f | PSR_x}, |
| {"SPSR_csf", FALSE, PSR_c | PSR_s | PSR_f}, |
| {"SPSR_csx", FALSE, PSR_c | PSR_s | PSR_x}, |
| {"SPSR_cxf", FALSE, PSR_c | PSR_x | PSR_f}, |
| {"SPSR_cxs", FALSE, PSR_c | PSR_x | PSR_s}, |
| {"SPSR_fsxc", FALSE, PSR_f | PSR_s | PSR_x | PSR_c}, |
| {"SPSR_fscx", FALSE, PSR_f | PSR_s | PSR_c | PSR_x}, |
| {"SPSR_fxsc", FALSE, PSR_f | PSR_x | PSR_s | PSR_c}, |
| {"SPSR_fxcs", FALSE, PSR_f | PSR_x | PSR_c | PSR_s}, |
| {"SPSR_fcsx", FALSE, PSR_f | PSR_c | PSR_s | PSR_x}, |
| {"SPSR_fcxs", FALSE, PSR_f | PSR_c | PSR_x | PSR_s}, |
| {"SPSR_sfxc", FALSE, PSR_s | PSR_f | PSR_x | PSR_c}, |
| {"SPSR_sfcx", FALSE, PSR_s | PSR_f | PSR_c | PSR_x}, |
| {"SPSR_sxfc", FALSE, PSR_s | PSR_x | PSR_f | PSR_c}, |
| {"SPSR_sxcf", FALSE, PSR_s | PSR_x | PSR_c | PSR_f}, |
| {"SPSR_scfx", FALSE, PSR_s | PSR_c | PSR_f | PSR_x}, |
| {"SPSR_scxf", FALSE, PSR_s | PSR_c | PSR_x | PSR_f}, |
| {"SPSR_xfsc", FALSE, PSR_x | PSR_f | PSR_s | PSR_c}, |
| {"SPSR_xfcs", FALSE, PSR_x | PSR_f | PSR_c | PSR_s}, |
| {"SPSR_xsfc", FALSE, PSR_x | PSR_s | PSR_f | PSR_c}, |
| {"SPSR_xscf", FALSE, PSR_x | PSR_s | PSR_c | PSR_f}, |
| {"SPSR_xcfs", FALSE, PSR_x | PSR_c | PSR_f | PSR_s}, |
| {"SPSR_xcsf", FALSE, PSR_x | PSR_c | PSR_s | PSR_f}, |
| {"SPSR_cfsx", FALSE, PSR_c | PSR_f | PSR_s | PSR_x}, |
| {"SPSR_cfxs", FALSE, PSR_c | PSR_f | PSR_x | PSR_s}, |
| {"SPSR_csfx", FALSE, PSR_c | PSR_s | PSR_f | PSR_x}, |
| {"SPSR_csxf", FALSE, PSR_c | PSR_s | PSR_x | PSR_f}, |
| {"SPSR_cxfs", FALSE, PSR_c | PSR_x | PSR_f | PSR_s}, |
| {"SPSR_cxsf", FALSE, PSR_c | PSR_x | PSR_s | PSR_f}, |
| }; |
| |
| enum vfp_dp_reg_pos |
| { |
| VFP_REG_Dd, VFP_REG_Dm, VFP_REG_Dn |
| }; |
| |
| enum vfp_sp_reg_pos |
| { |
| VFP_REG_Sd, VFP_REG_Sm, VFP_REG_Sn |
| }; |
| |
| enum vfp_ldstm_type |
| { |
| VFP_LDSTMIA, VFP_LDSTMDB, VFP_LDSTMIAX, VFP_LDSTMDBX |
| }; |
| |
| /* VFP system registers. */ |
| struct vfp_reg |
| { |
| const char *name; |
| unsigned long regno; |
| }; |
| |
| static const struct vfp_reg vfp_regs[] = |
| { |
| {"fpsid", 0x00000000}, |
| {"FPSID", 0x00000000}, |
| {"fpscr", 0x00010000}, |
| {"FPSCR", 0x00010000}, |
| {"fpexc", 0x00080000}, |
| {"FPEXC", 0x00080000} |
| }; |
| |
| /* Structure for a hash table entry for a register. */ |
| struct reg_entry |
| { |
| const char * name; |
| int number; |
| }; |
| |
| /* Some well known registers that we refer to directly elsewhere. */ |
| #define REG_SP 13 |
| #define REG_LR 14 |
| #define REG_PC 15 |
| |
| /* These are the standard names. Users can add aliases with .req. */ |
| /* Integer Register Numbers. */ |
| static const struct reg_entry rn_table[] = |
| { |
| {"r0", 0}, {"r1", 1}, {"r2", 2}, {"r3", 3}, |
| {"r4", 4}, {"r5", 5}, {"r6", 6}, {"r7", 7}, |
| {"r8", 8}, {"r9", 9}, {"r10", 10}, {"r11", 11}, |
| {"r12", 12}, {"r13", REG_SP}, {"r14", REG_LR}, {"r15", REG_PC}, |
| /* ATPCS Synonyms. */ |
| {"a1", 0}, {"a2", 1}, {"a3", 2}, {"a4", 3}, |
| {"v1", 4}, {"v2", 5}, {"v3", 6}, {"v4", 7}, |
| {"v5", 8}, {"v6", 9}, {"v7", 10}, {"v8", 11}, |
| /* Well-known aliases. */ |
| {"wr", 7}, |
| {"sb", 9}, {"sl", 10}, {"fp", 11}, |
| {"ip", 12}, {"sp", REG_SP}, {"lr", REG_LR}, {"pc", REG_PC}, |
| {NULL, 0} |
| }; |
| |
| /* Co-processor Numbers. */ |
| static const struct reg_entry cp_table[] = |
| { |
| {"p0", 0}, {"p1", 1}, {"p2", 2}, {"p3", 3}, |
| {"p4", 4}, {"p5", 5}, {"p6", 6}, {"p7", 7}, |
| {"p8", 8}, {"p9", 9}, {"p10", 10}, {"p11", 11}, |
| {"p12", 12}, {"p13", 13}, {"p14", 14}, {"p15", 15}, |
| {NULL, 0} |
| }; |
| |
| /* Co-processor Register Numbers. */ |
| static const struct reg_entry cn_table[] = |
| { |
| {"c0", 0}, {"c1", 1}, {"c2", 2}, {"c3", 3}, |
| {"c4", 4}, {"c5", 5}, {"c6", 6}, {"c7", 7}, |
| {"c8", 8}, {"c9", 9}, {"c10", 10}, {"c11", 11}, |
| {"c12", 12}, {"c13", 13}, {"c14", 14}, {"c15", 15}, |
| /* Not really valid, but kept for back-wards compatibility. */ |
| {"cr0", 0}, {"cr1", 1}, {"cr2", 2}, {"cr3", 3}, |
| {"cr4", 4}, {"cr5", 5}, {"cr6", 6}, {"cr7", 7}, |
| {"cr8", 8}, {"cr9", 9}, {"cr10", 10}, {"cr11", 11}, |
| {"cr12", 12}, {"cr13", 13}, {"cr14", 14}, {"cr15", 15}, |
| {NULL, 0} |
| }; |
| |
| /* FPA Registers. */ |
| static const struct reg_entry fn_table[] = |
| { |
| {"f0", 0}, {"f1", 1}, {"f2", 2}, {"f3", 3}, |
| {"f4", 4}, {"f5", 5}, {"f6", 6}, {"f7", 7}, |
| {NULL, 0} |
| }; |
| |
| /* VFP SP Registers. */ |
| static const struct reg_entry sn_table[] = |
| { |
| {"s0", 0}, {"s1", 1}, {"s2", 2}, {"s3", 3}, |
| {"s4", 4}, {"s5", 5}, {"s6", 6}, {"s7", 7}, |
| {"s8", 8}, {"s9", 9}, {"s10", 10}, {"s11", 11}, |
| {"s12", 12}, {"s13", 13}, {"s14", 14}, {"s15", 15}, |
| {"s16", 16}, {"s17", 17}, {"s18", 18}, {"s19", 19}, |
| {"s20", 20}, {"s21", 21}, {"s22", 22}, {"s23", 23}, |
| {"s24", 24}, {"s25", 25}, {"s26", 26}, {"s27", 27}, |
| {"s28", 28}, {"s29", 29}, {"s30", 30}, {"s31", 31}, |
| {NULL, 0} |
| }; |
| |
| /* VFP DP Registers. */ |
| static const struct reg_entry dn_table[] = |
| { |
| {"d0", 0}, {"d1", 1}, {"d2", 2}, {"d3", 3}, |
| {"d4", 4}, {"d5", 5}, {"d6", 6}, {"d7", 7}, |
| {"d8", 8}, {"d9", 9}, {"d10", 10}, {"d11", 11}, |
| {"d12", 12}, {"d13", 13}, {"d14", 14}, {"d15", 15}, |
| {NULL, 0} |
| }; |
| |
| /* Maverick DSP coprocessor registers. */ |
| static const struct reg_entry mav_mvf_table[] = |
| { |
| {"mvf0", 0}, {"mvf1", 1}, {"mvf2", 2}, {"mvf3", 3}, |
| {"mvf4", 4}, {"mvf5", 5}, {"mvf6", 6}, {"mvf7", 7}, |
| {"mvf8", 8}, {"mvf9", 9}, {"mvf10", 10}, {"mvf11", 11}, |
| {"mvf12", 12}, {"mvf13", 13}, {"mvf14", 14}, {"mvf15", 15}, |
| {NULL, 0} |
| }; |
| |
| static const struct reg_entry mav_mvd_table[] = |
| { |
| {"mvd0", 0}, {"mvd1", 1}, {"mvd2", 2}, {"mvd3", 3}, |
| {"mvd4", 4}, {"mvd5", 5}, {"mvd6", 6}, {"mvd7", 7}, |
| {"mvd8", 8}, {"mvd9", 9}, {"mvd10", 10}, {"mvd11", 11}, |
| {"mvd12", 12}, {"mvd13", 13}, {"mvd14", 14}, {"mvd15", 15}, |
| {NULL, 0} |
| }; |
| |
| static const struct reg_entry mav_mvfx_table[] = |
| { |
| {"mvfx0", 0}, {"mvfx1", 1}, {"mvfx2", 2}, {"mvfx3", 3}, |
| {"mvfx4", 4}, {"mvfx5", 5}, {"mvfx6", 6}, {"mvfx7", 7}, |
| {"mvfx8", 8}, {"mvfx9", 9}, {"mvfx10", 10}, {"mvfx11", 11}, |
| {"mvfx12", 12}, {"mvfx13", 13}, {"mvfx14", 14}, {"mvfx15", 15}, |
| {NULL, 0} |
| }; |
| |
| static const struct reg_entry mav_mvdx_table[] = |
| { |
| {"mvdx0", 0}, {"mvdx1", 1}, {"mvdx2", 2}, {"mvdx3", 3}, |
| {"mvdx4", 4}, {"mvdx5", 5}, {"mvdx6", 6}, {"mvdx7", 7}, |
| {"mvdx8", 8}, {"mvdx9", 9}, {"mvdx10", 10}, {"mvdx11", 11}, |
| {"mvdx12", 12}, {"mvdx13", 13}, {"mvdx14", 14}, {"mvdx15", 15}, |
| {NULL, 0} |
| }; |
| |
| static const struct reg_entry mav_mvax_table[] = |
| { |
| {"mvax0", 0}, {"mvax1", 1}, {"mvax2", 2}, {"mvax3", 3}, |
| {NULL, 0} |
| }; |
| |
| static const struct reg_entry mav_dspsc_table[] = |
| { |
| {"dspsc", 0}, |
| {NULL, 0} |
| }; |
| |
| struct reg_map |
| { |
| const struct reg_entry *names; |
| int max_regno; |
| struct hash_control *htab; |
| const char *expected; |
| }; |
| |
| struct reg_map all_reg_maps[] = |
| { |
| {rn_table, 15, NULL, N_("ARM register expected")}, |
| {cp_table, 15, NULL, N_("bad or missing co-processor number")}, |
| {cn_table, 15, NULL, N_("co-processor register expected")}, |
| {fn_table, 7, NULL, N_("FPA register expected")}, |
| {sn_table, 31, NULL, N_("VFP single precision register expected")}, |
| {dn_table, 15, NULL, N_("VFP double precision register expected")}, |
| {mav_mvf_table, 15, NULL, N_("Maverick MVF register expected")}, |
| {mav_mvd_table, 15, NULL, N_("Maverick MVD register expected")}, |
| {mav_mvfx_table, 15, NULL, N_("Maverick MVFX register expected")}, |
| {mav_mvdx_table, 15, NULL, N_("Maverick MVFX register expected")}, |
| {mav_mvax_table, 3, NULL, N_("Maverick MVAX register expected")}, |
| {mav_dspsc_table, 0, NULL, N_("Maverick DSPSC register expected")}, |
| }; |
| |
| /* Enumeration matching entries in table above. */ |
| enum arm_reg_type |
| { |
| REG_TYPE_RN = 0, |
| #define REG_TYPE_FIRST REG_TYPE_RN |
| REG_TYPE_CP = 1, |
| REG_TYPE_CN = 2, |
| REG_TYPE_FN = 3, |
| REG_TYPE_SN = 4, |
| REG_TYPE_DN = 5, |
| REG_TYPE_MVF = 6, |
| REG_TYPE_MVD = 7, |
| REG_TYPE_MVFX = 8, |
| REG_TYPE_MVDX = 9, |
| REG_TYPE_MVAX = 10, |
| REG_TYPE_DSPSC = 11, |
| |
| REG_TYPE_MAX = 12 |
| }; |
| |
| /* Functions called by parser. */ |
| /* ARM instructions. */ |
| static void do_arit PARAMS ((char *)); |
| static void do_cmp PARAMS ((char *)); |
| static void do_mov PARAMS ((char *)); |
| static void do_ldst PARAMS ((char *)); |
| static void do_ldstt PARAMS ((char *)); |
| static void do_ldmstm PARAMS ((char *)); |
| static void do_branch PARAMS ((char *)); |
| static void do_swi PARAMS ((char *)); |
| |
| /* Pseudo Op codes. */ |
| static void do_adr PARAMS ((char *)); |
| static void do_adrl PARAMS ((char *)); |
| static void do_empty PARAMS ((char *)); |
| |
| /* ARM v2. */ |
| static void do_mul PARAMS ((char *)); |
| static void do_mla PARAMS ((char *)); |
| |
| /* ARM v2S. */ |
| static void do_swap PARAMS ((char *)); |
| |
| /* ARM v3. */ |
| static void do_msr PARAMS ((char *)); |
| static void do_mrs PARAMS ((char *)); |
| |
| /* ARM v3M. */ |
| static void do_mull PARAMS ((char *)); |
| |
| /* ARM v4. */ |
| static void do_ldstv4 PARAMS ((char *)); |
| |
| /* ARM v4T. */ |
| static void do_bx PARAMS ((char *)); |
| |
| /* ARM v5T. */ |
| static void do_blx PARAMS ((char *)); |
| static void do_bkpt PARAMS ((char *)); |
| static void do_clz PARAMS ((char *)); |
| static void do_lstc2 PARAMS ((char *)); |
| static void do_cdp2 PARAMS ((char *)); |
| static void do_co_reg2 PARAMS ((char *)); |
| |
| /* ARM v5TExP. */ |
| static void do_smla PARAMS ((char *)); |
| static void do_smlal PARAMS ((char *)); |
| static void do_smul PARAMS ((char *)); |
| static void do_qadd PARAMS ((char *)); |
| |
| /* ARM v5TE. */ |
| static void do_pld PARAMS ((char *)); |
| static void do_ldrd PARAMS ((char *)); |
| static void do_co_reg2c PARAMS ((char *)); |
| |
| /* ARM v5TEJ. */ |
| static void do_bxj PARAMS ((char *)); |
| |
| /* Coprocessor Instructions. */ |
| static void do_cdp PARAMS ((char *)); |
| static void do_lstc PARAMS ((char *)); |
| static void do_co_reg PARAMS ((char *)); |
| |
| /* FPA instructions. */ |
| static void do_fpa_ctrl PARAMS ((char *)); |
| static void do_fpa_ldst PARAMS ((char *)); |
| static void do_fpa_ldmstm PARAMS ((char *)); |
| static void do_fpa_dyadic PARAMS ((char *)); |
| static void do_fpa_monadic PARAMS ((char *)); |
| static void do_fpa_cmp PARAMS ((char *)); |
| static void do_fpa_from_reg PARAMS ((char *)); |
| static void do_fpa_to_reg PARAMS ((char *)); |
| |
| /* VFP instructions. */ |
| static void do_vfp_sp_monadic PARAMS ((char *)); |
| static void do_vfp_dp_monadic PARAMS ((char *)); |
| static void do_vfp_sp_dyadic PARAMS ((char *)); |
| static void do_vfp_dp_dyadic PARAMS ((char *)); |
| static void do_vfp_reg_from_sp PARAMS ((char *)); |
| static void do_vfp_sp_from_reg PARAMS ((char *)); |
| static void do_vfp_sp_reg2 PARAMS ((char *)); |
| static void do_vfp_reg_from_dp PARAMS ((char *)); |
| static void do_vfp_reg2_from_dp PARAMS ((char *)); |
| static void do_vfp_dp_from_reg PARAMS ((char *)); |
| static void do_vfp_dp_from_reg2 PARAMS ((char *)); |
| static void do_vfp_reg_from_ctrl PARAMS ((char *)); |
| static void do_vfp_ctrl_from_reg PARAMS ((char *)); |
| static void do_vfp_sp_ldst PARAMS ((char *)); |
| static void do_vfp_dp_ldst PARAMS ((char *)); |
| static void do_vfp_sp_ldstmia PARAMS ((char *)); |
| static void do_vfp_sp_ldstmdb PARAMS ((char *)); |
| static void do_vfp_dp_ldstmia PARAMS ((char *)); |
| static void do_vfp_dp_ldstmdb PARAMS ((char *)); |
| static void do_vfp_xp_ldstmia PARAMS ((char *)); |
| static void do_vfp_xp_ldstmdb PARAMS ((char *)); |
| static void do_vfp_sp_compare_z PARAMS ((char *)); |
| static void do_vfp_dp_compare_z PARAMS ((char *)); |
| static void do_vfp_dp_sp_cvt PARAMS ((char *)); |
| static void do_vfp_sp_dp_cvt PARAMS ((char *)); |
| |
| /* XScale. */ |
| static void do_xsc_mia PARAMS ((char *)); |
| static void do_xsc_mar PARAMS ((char *)); |
| static void do_xsc_mra PARAMS ((char *)); |
| |
| /* Maverick. */ |
| static void do_mav_binops PARAMS ((char *, int, enum arm_reg_type, |
| enum arm_reg_type)); |
| static void do_mav_binops_1a PARAMS ((char *)); |
| static void do_mav_binops_1b PARAMS ((char *)); |
| static void do_mav_binops_1c PARAMS ((char *)); |
| static void do_mav_binops_1d PARAMS ((char *)); |
| static void do_mav_binops_1e PARAMS ((char *)); |
| static void do_mav_binops_1f PARAMS ((char *)); |
| static void do_mav_binops_1g PARAMS ((char *)); |
| static void do_mav_binops_1h PARAMS ((char *)); |
| static void do_mav_binops_1i PARAMS ((char *)); |
| static void do_mav_binops_1j PARAMS ((char *)); |
| static void do_mav_binops_1k PARAMS ((char *)); |
| static void do_mav_binops_1l PARAMS ((char *)); |
| static void do_mav_binops_1m PARAMS ((char *)); |
| static void do_mav_binops_1n PARAMS ((char *)); |
| static void do_mav_binops_1o PARAMS ((char *)); |
| static void do_mav_binops_2a PARAMS ((char *)); |
| static void do_mav_binops_2b PARAMS ((char *)); |
| static void do_mav_binops_2c PARAMS ((char *)); |
| static void do_mav_binops_3a PARAMS ((char *)); |
| static void do_mav_binops_3b PARAMS ((char *)); |
| static void do_mav_binops_3c PARAMS ((char *)); |
| static void do_mav_binops_3d PARAMS ((char *)); |
| static void do_mav_triple PARAMS ((char *, int, enum arm_reg_type, |
| enum arm_reg_type, |
| enum arm_reg_type)); |
| static void do_mav_triple_4a PARAMS ((char *)); |
| static void do_mav_triple_4b PARAMS ((char *)); |
| static void do_mav_triple_5a PARAMS ((char *)); |
| static void do_mav_triple_5b PARAMS ((char *)); |
| static void do_mav_triple_5c PARAMS ((char *)); |
| static void do_mav_triple_5d PARAMS ((char *)); |
| static void do_mav_triple_5e PARAMS ((char *)); |
| static void do_mav_triple_5f PARAMS ((char *)); |
| static void do_mav_triple_5g PARAMS ((char *)); |
| static void do_mav_triple_5h PARAMS ((char *)); |
| static void do_mav_quad PARAMS ((char *, int, enum arm_reg_type, |
| enum arm_reg_type, |
| enum arm_reg_type, |
| enum arm_reg_type)); |
| static void do_mav_quad_6a PARAMS ((char *)); |
| static void do_mav_quad_6b PARAMS ((char *)); |
| static void do_mav_dspsc_1 PARAMS ((char *)); |
| static void do_mav_dspsc_2 PARAMS ((char *)); |
| static void do_mav_shift PARAMS ((char *, enum arm_reg_type, |
| enum arm_reg_type)); |
| static void do_mav_shift_1 PARAMS ((char *)); |
| static void do_mav_shift_2 PARAMS ((char *)); |
| static void do_mav_ldst PARAMS ((char *, enum arm_reg_type)); |
| static void do_mav_ldst_1 PARAMS ((char *)); |
| static void do_mav_ldst_2 PARAMS ((char *)); |
| static void do_mav_ldst_3 PARAMS ((char *)); |
| static void do_mav_ldst_4 PARAMS ((char *)); |
| |
| static int mav_reg_required_here PARAMS ((char **, int, |
| enum arm_reg_type)); |
| static int mav_parse_offset PARAMS ((char **, int *)); |
| |
| static void fix_new_arm PARAMS ((fragS *, int, short, expressionS *, |
| int, int)); |
| static int arm_reg_parse PARAMS ((char **, struct hash_control *)); |
| static enum arm_reg_type arm_reg_parse_any PARAMS ((char *)); |
| static const struct asm_psr * arm_psr_parse PARAMS ((char **)); |
| static void symbol_locate PARAMS ((symbolS *, const char *, segT, valueT, |
| fragS *)); |
| static int add_to_lit_pool PARAMS ((void)); |
| static unsigned validate_immediate PARAMS ((unsigned)); |
| static unsigned validate_immediate_twopart PARAMS ((unsigned int, |
| unsigned int *)); |
| static int validate_offset_imm PARAMS ((unsigned int, int)); |
| static void opcode_select PARAMS ((int)); |
| static void end_of_line PARAMS ((char *)); |
| static int reg_required_here PARAMS ((char **, int)); |
| static int psr_required_here PARAMS ((char **)); |
| static int co_proc_number PARAMS ((char **)); |
| static int cp_opc_expr PARAMS ((char **, int, int)); |
| static int cp_reg_required_here PARAMS ((char **, int)); |
| static int fp_reg_required_here PARAMS ((char **, int)); |
| static int vfp_sp_reg_required_here PARAMS ((char **, enum vfp_sp_reg_pos)); |
| static int vfp_dp_reg_required_here PARAMS ((char **, enum vfp_dp_reg_pos)); |
| static void vfp_sp_ldstm PARAMS ((char *, enum vfp_ldstm_type)); |
| static void vfp_dp_ldstm PARAMS ((char *, enum vfp_ldstm_type)); |
| static long vfp_sp_reg_list PARAMS ((char **, enum vfp_sp_reg_pos)); |
| static long vfp_dp_reg_list PARAMS ((char **)); |
| static int vfp_psr_required_here PARAMS ((char **str)); |
| static const struct vfp_reg *vfp_psr_parse PARAMS ((char **str)); |
| static int cp_address_offset PARAMS ((char **)); |
| static int cp_address_required_here PARAMS ((char **, int)); |
| static int my_get_float_expression PARAMS ((char **)); |
| static int skip_past_comma PARAMS ((char **)); |
| static int walk_no_bignums PARAMS ((symbolS *)); |
| static int negate_data_op PARAMS ((unsigned long *, unsigned long)); |
| static int data_op2 PARAMS ((char **)); |
| static int fp_op2 PARAMS ((char **)); |
| static long reg_list PARAMS ((char **)); |
| static void thumb_load_store PARAMS ((char *, int, int)); |
| static int decode_shift PARAMS ((char **, int)); |
| static int ldst_extend PARAMS ((char **)); |
| static int ldst_extend_v4 PARAMS ((char **)); |
| static void thumb_add_sub PARAMS ((char *, int)); |
| static void insert_reg PARAMS ((const struct reg_entry *, |
| struct hash_control *)); |
| static void thumb_shift PARAMS ((char *, int)); |
| static void thumb_mov_compare PARAMS ((char *, int)); |
| static void build_arm_ops_hsh PARAMS ((void)); |
| static void set_constant_flonums PARAMS ((void)); |
| static valueT md_chars_to_number PARAMS ((char *, int)); |
| static void build_reg_hsh PARAMS ((struct reg_map *)); |
| static void insert_reg_alias PARAMS ((char *, int, struct hash_control *)); |
| static int create_register_alias PARAMS ((char *, char *)); |
| static void output_inst PARAMS ((const char *)); |
| static int accum0_required_here PARAMS ((char **)); |
| static int ld_mode_required_here PARAMS ((char **)); |
| static void do_branch25 PARAMS ((char *)); |
| static symbolS * find_real_start PARAMS ((symbolS *)); |
| #ifdef OBJ_ELF |
| static bfd_reloc_code_real_type arm_parse_reloc PARAMS ((void)); |
| #endif |
| |
| /* ARM instructions take 4bytes in the object file, Thumb instructions |
| take 2: */ |
| #define INSN_SIZE 4 |
| |
| /* "INSN<cond> X,Y" where X:bit12, Y:bit16. */ |
| #define MAV_MODE1 0x100c |
| |
| /* "INSN<cond> X,Y" where X:bit16, Y:bit12. */ |
| #define MAV_MODE2 0x0c10 |
| |
| /* "INSN<cond> X,Y" where X:0, Y:bit16. */ |
| #define MAV_MODE3 0x1000 |
| |
| /* "INSN<cond> X,Y,Z" where X:16, Y:0, Z:12. */ |
| #define MAV_MODE4 0x0c0010 |
| |
| /* "INSN<cond> X,Y,Z" where X:12, Y:16, Z:0. */ |
| #define MAV_MODE5 0x00100c |
| |
| /* "INSN<cond> W,X,Y,Z" where W:5, X:12, Y:16, Z:0. */ |
| #define MAV_MODE6 0x00100c05 |
| |
| struct asm_opcode |
| { |
| /* Basic string to match. */ |
| const char * template; |
| |
| /* Basic instruction code. */ |
| unsigned long value; |
| |
| /* Offset into the template where the condition code (if any) will be. |
| If zero, then the instruction is never conditional. */ |
| unsigned cond_offset; |
| |
| /* Which architecture variant provides this instruction. */ |
| unsigned long variant; |
| |
| /* Function to call to parse args. */ |
| void (* parms) PARAMS ((char *)); |
| }; |
| |
| static const struct asm_opcode insns[] = |
| { |
| /* Core ARM Instructions. */ |
| {"and", 0xe0000000, 3, ARM_EXT_V1, do_arit}, |
| {"ands", 0xe0100000, 3, ARM_EXT_V1, do_arit}, |
| {"eor", 0xe0200000, 3, ARM_EXT_V1, do_arit}, |
| {"eors", 0xe0300000, 3, ARM_EXT_V1, do_arit}, |
| {"sub", 0xe0400000, 3, ARM_EXT_V1, do_arit}, |
| {"subs", 0xe0500000, 3, ARM_EXT_V1, do_arit}, |
| {"rsb", 0xe0600000, 3, ARM_EXT_V1, do_arit}, |
| {"rsbs", 0xe0700000, 3, ARM_EXT_V1, do_arit}, |
| {"add", 0xe0800000, 3, ARM_EXT_V1, do_arit}, |
| {"adds", 0xe0900000, 3, ARM_EXT_V1, do_arit}, |
| {"adc", 0xe0a00000, 3, ARM_EXT_V1, do_arit}, |
| {"adcs", 0xe0b00000, 3, ARM_EXT_V1, do_arit}, |
| {"sbc", 0xe0c00000, 3, ARM_EXT_V1, do_arit}, |
| {"sbcs", 0xe0d00000, 3, ARM_EXT_V1, do_arit}, |
| {"rsc", 0xe0e00000, 3, ARM_EXT_V1, do_arit}, |
| {"rscs", 0xe0f00000, 3, ARM_EXT_V1, do_arit}, |
| {"orr", 0xe1800000, 3, ARM_EXT_V1, do_arit}, |
| {"orrs", 0xe1900000, 3, ARM_EXT_V1, do_arit}, |
| {"bic", 0xe1c00000, 3, ARM_EXT_V1, do_arit}, |
| {"bics", 0xe1d00000, 3, ARM_EXT_V1, do_arit}, |
| |
| {"tst", 0xe1100000, 3, ARM_EXT_V1, do_cmp}, |
| {"tsts", 0xe1100000, 3, ARM_EXT_V1, do_cmp}, |
| {"tstp", 0xe110f000, 3, ARM_EXT_V1, do_cmp}, |
| {"teq", 0xe1300000, 3, ARM_EXT_V1, do_cmp}, |
| {"teqs", 0xe1300000, 3, ARM_EXT_V1, do_cmp}, |
| {"teqp", 0xe130f000, 3, ARM_EXT_V1, do_cmp}, |
| {"cmp", 0xe1500000, 3, ARM_EXT_V1, do_cmp}, |
| {"cmps", 0xe1500000, 3, ARM_EXT_V1, do_cmp}, |
| {"cmpp", 0xe150f000, 3, ARM_EXT_V1, do_cmp}, |
| {"cmn", 0xe1700000, 3, ARM_EXT_V1, do_cmp}, |
| {"cmns", 0xe1700000, 3, ARM_EXT_V1, do_cmp}, |
| {"cmnp", 0xe170f000, 3, ARM_EXT_V1, do_cmp}, |
| |
| {"mov", 0xe1a00000, 3, ARM_EXT_V1, do_mov}, |
| {"movs", 0xe1b00000, 3, ARM_EXT_V1, do_mov}, |
| {"mvn", 0xe1e00000, 3, ARM_EXT_V1, do_mov}, |
| {"mvns", 0xe1f00000, 3, ARM_EXT_V1, do_mov}, |
| |
| {"ldr", 0xe4100000, 3, ARM_EXT_V1, do_ldst}, |
| {"ldrb", 0xe4500000, 3, ARM_EXT_V1, do_ldst}, |
| {"ldrt", 0xe4300000, 3, ARM_EXT_V1, do_ldstt}, |
| {"ldrbt", 0xe4700000, 3, ARM_EXT_V1, do_ldstt}, |
| {"str", 0xe4000000, 3, ARM_EXT_V1, do_ldst}, |
| {"strb", 0xe4400000, 3, ARM_EXT_V1, do_ldst}, |
| {"strt", 0xe4200000, 3, ARM_EXT_V1, do_ldstt}, |
| {"strbt", 0xe4600000, 3, ARM_EXT_V1, do_ldstt}, |
| |
| {"stmia", 0xe8800000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"stmib", 0xe9800000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"stmda", 0xe8000000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"stmdb", 0xe9000000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"stmfd", 0xe9000000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"stmfa", 0xe9800000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"stmea", 0xe8800000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"stmed", 0xe8000000, 3, ARM_EXT_V1, do_ldmstm}, |
| |
| {"ldmia", 0xe8900000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"ldmib", 0xe9900000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"ldmda", 0xe8100000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"ldmdb", 0xe9100000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"ldmfd", 0xe8900000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"ldmfa", 0xe8100000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"ldmea", 0xe9100000, 3, ARM_EXT_V1, do_ldmstm}, |
| {"ldmed", 0xe9900000, 3, ARM_EXT_V1, do_ldmstm}, |
| |
| {"swi", 0xef000000, 3, ARM_EXT_V1, do_swi}, |
| #ifdef TE_WINCE |
| /* XXX This is the wrong place to do this. Think multi-arch. */ |
| {"bl", 0xeb000000, 2, ARM_EXT_V1, do_branch}, |
| {"b", 0xea000000, 1, ARM_EXT_V1, do_branch}, |
| #else |
| {"bl", 0xebfffffe, 2, ARM_EXT_V1, do_branch}, |
| {"b", 0xeafffffe, 1, ARM_EXT_V1, do_branch}, |
| #endif |
| |
| /* Pseudo ops. */ |
| {"adr", 0xe28f0000, 3, ARM_EXT_V1, do_adr}, |
| {"adrl", 0xe28f0000, 3, ARM_EXT_V1, do_adrl}, |
| {"nop", 0xe1a00000, 3, ARM_EXT_V1, do_empty}, |
| |
| /* ARM 2 multiplies. */ |
| {"mul", 0xe0000090, 3, ARM_EXT_V2, do_mul}, |
| {"muls", 0xe0100090, 3, ARM_EXT_V2, do_mul}, |
| {"mla", 0xe0200090, 3, ARM_EXT_V2, do_mla}, |
| {"mlas", 0xe0300090, 3, ARM_EXT_V2, do_mla}, |
| |
| /* Generic copressor instructions. */ |
| {"cdp", 0xee000000, 3, ARM_EXT_V2, do_cdp}, |
| {"ldc", 0xec100000, 3, ARM_EXT_V2, do_lstc}, |
| {"ldcl", 0xec500000, 3, ARM_EXT_V2, do_lstc}, |
| {"stc", 0xec000000, 3, ARM_EXT_V2, do_lstc}, |
| {"stcl", 0xec400000, 3, ARM_EXT_V2, do_lstc}, |
| {"mcr", 0xee000010, 3, ARM_EXT_V2, do_co_reg}, |
| {"mrc", 0xee100010, 3, ARM_EXT_V2, do_co_reg}, |
| |
| /* ARM 3 - swp instructions. */ |
| {"swp", 0xe1000090, 3, ARM_EXT_V2S, do_swap}, |
| {"swpb", 0xe1400090, 3, ARM_EXT_V2S, do_swap}, |
| |
| /* ARM 6 Status register instructions. */ |
| {"mrs", 0xe10f0000, 3, ARM_EXT_V3, do_mrs}, |
| {"msr", 0xe120f000, 3, ARM_EXT_V3, do_msr}, |
| /* ScottB: our code uses 0xe128f000 for msr. |
| NickC: but this is wrong because the bits 16 through 19 are |
| handled by the PSR_xxx defines above. */ |
| |
| /* ARM 7M long multiplies. */ |
| {"smull", 0xe0c00090, 5, ARM_EXT_V3M, do_mull}, |
| {"smulls", 0xe0d00090, 5, ARM_EXT_V3M, do_mull}, |
| {"umull", 0xe0800090, 5, ARM_EXT_V3M, do_mull}, |
| {"umulls", 0xe0900090, 5, ARM_EXT_V3M, do_mull}, |
| {"smlal", 0xe0e00090, 5, ARM_EXT_V3M, do_mull}, |
| {"smlals", 0xe0f00090, 5, ARM_EXT_V3M, do_mull}, |
| {"umlal", 0xe0a00090, 5, ARM_EXT_V3M, do_mull}, |
| {"umlals", 0xe0b00090, 5, ARM_EXT_V3M, do_mull}, |
| |
| /* ARM Architecture 4. */ |
| {"ldrh", 0xe01000b0, 3, ARM_EXT_V4, do_ldstv4}, |
| {"ldrsh", 0xe01000f0, 3, ARM_EXT_V4, do_ldstv4}, |
| {"ldrsb", 0xe01000d0, 3, ARM_EXT_V4, do_ldstv4}, |
| {"strh", 0xe00000b0, 3, ARM_EXT_V4, do_ldstv4}, |
| |
| /* ARM Architecture 4T. */ |
| /* Note: bx (and blx) are required on V5, even if the processor does |
| not support Thumb. */ |
| {"bx", 0xe12fff10, 2, ARM_EXT_V4T | ARM_EXT_V5, do_bx}, |
| |
| /* ARM Architecture 5T. */ |
| /* Note: blx has 2 variants, so the .value is set dynamically. |
| Only one of the variants has conditional execution. */ |
| {"blx", 0xe0000000, 3, ARM_EXT_V5, do_blx}, |
| {"clz", 0xe16f0f10, 3, ARM_EXT_V5, do_clz}, |
| {"bkpt", 0xe1200070, 0, ARM_EXT_V5, do_bkpt}, |
| {"ldc2", 0xfc100000, 0, ARM_EXT_V5, do_lstc2}, |
| {"ldc2l", 0xfc500000, 0, ARM_EXT_V5, do_lstc2}, |
| {"stc2", 0xfc000000, 0, ARM_EXT_V5, do_lstc2}, |
| {"stc2l", 0xfc400000, 0, ARM_EXT_V5, do_lstc2}, |
| {"cdp2", 0xfe000000, 0, ARM_EXT_V5, do_cdp2}, |
| {"mcr2", 0xfe000010, 0, ARM_EXT_V5, do_co_reg2}, |
| {"mrc2", 0xfe100010, 0, ARM_EXT_V5, do_co_reg2}, |
| |
| /* ARM Architecture 5TExP. */ |
| {"smlabb", 0xe1000080, 6, ARM_EXT_V5ExP, do_smla}, |
| {"smlatb", 0xe10000a0, 6, ARM_EXT_V5ExP, do_smla}, |
| {"smlabt", 0xe10000c0, 6, ARM_EXT_V5ExP, do_smla}, |
| {"smlatt", 0xe10000e0, 6, ARM_EXT_V5ExP, do_smla}, |
| |
| {"smlawb", 0xe1200080, 6, ARM_EXT_V5ExP, do_smla}, |
| {"smlawt", 0xe12000c0, 6, ARM_EXT_V5ExP, do_smla}, |
| |
| {"smlalbb", 0xe1400080, 7, ARM_EXT_V5ExP, do_smlal}, |
| {"smlaltb", 0xe14000a0, 7, ARM_EXT_V5ExP, do_smlal}, |
| {"smlalbt", 0xe14000c0, 7, ARM_EXT_V5ExP, do_smlal}, |
| {"smlaltt", 0xe14000e0, 7, ARM_EXT_V5ExP, do_smlal}, |
| |
| {"smulbb", 0xe1600080, 6, ARM_EXT_V5ExP, do_smul}, |
| {"smultb", 0xe16000a0, 6, ARM_EXT_V5ExP, do_smul}, |
| {"smulbt", 0xe16000c0, 6, ARM_EXT_V5ExP, do_smul}, |
| {"smultt", 0xe16000e0, 6, ARM_EXT_V5ExP, do_smul}, |
| |
| {"smulwb", 0xe12000a0, 6, ARM_EXT_V5ExP, do_smul}, |
| {"smulwt", 0xe12000e0, 6, ARM_EXT_V5ExP, do_smul}, |
| |
| {"qadd", 0xe1000050, 4, ARM_EXT_V5ExP, do_qadd}, |
| {"qdadd", 0xe1400050, 5, ARM_EXT_V5ExP, do_qadd}, |
| {"qsub", 0xe1200050, 4, ARM_EXT_V5ExP, do_qadd}, |
| {"qdsub", 0xe1600050, 5, ARM_EXT_V5ExP, do_qadd}, |
| |
| /* ARM Architecture 5TE. */ |
| {"pld", 0xf450f000, 0, ARM_EXT_V5E, do_pld}, |
| {"ldrd", 0xe00000d0, 3, ARM_EXT_V5E, do_ldrd}, |
| {"strd", 0xe00000f0, 3, ARM_EXT_V5E, do_ldrd}, |
| |
| {"mcrr", 0xec400000, 4, ARM_EXT_V5E, do_co_reg2c}, |
| {"mrrc", 0xec500000, 4, ARM_EXT_V5E, do_co_reg2c}, |
| |
| /* ARM Architecture 5TEJ. */ |
| {"bxj", 0xe12fff20, 3, ARM_EXT_V5J, do_bxj}, |
| |
| /* Core FPA instruction set (V1). */ |
| {"wfs", 0xee200110, 3, FPU_FPA_EXT_V1, do_fpa_ctrl}, |
| {"rfs", 0xee300110, 3, FPU_FPA_EXT_V1, do_fpa_ctrl}, |
| {"wfc", 0xee400110, 3, FPU_FPA_EXT_V1, do_fpa_ctrl}, |
| {"rfc", 0xee500110, 3, FPU_FPA_EXT_V1, do_fpa_ctrl}, |
| |
| {"ldfs", 0xec100100, 3, FPU_FPA_EXT_V1, do_fpa_ldst}, |
| {"ldfd", 0xec108100, 3, FPU_FPA_EXT_V1, do_fpa_ldst}, |
| {"ldfe", 0xec500100, 3, FPU_FPA_EXT_V1, do_fpa_ldst}, |
| {"ldfp", 0xec508100, 3, FPU_FPA_EXT_V1, do_fpa_ldst}, |
| |
| {"stfs", 0xec000100, 3, FPU_FPA_EXT_V1, do_fpa_ldst}, |
| {"stfd", 0xec008100, 3, FPU_FPA_EXT_V1, do_fpa_ldst}, |
| {"stfe", 0xec400100, 3, FPU_FPA_EXT_V1, do_fpa_ldst}, |
| {"stfp", 0xec408100, 3, FPU_FPA_EXT_V1, do_fpa_ldst}, |
| |
| {"mvfs", 0xee008100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfsp", 0xee008120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfsm", 0xee008140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfsz", 0xee008160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfd", 0xee008180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfdp", 0xee0081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfdm", 0xee0081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfdz", 0xee0081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfe", 0xee088100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfep", 0xee088120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfem", 0xee088140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mvfez", 0xee088160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"mnfs", 0xee108100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfsp", 0xee108120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfsm", 0xee108140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfsz", 0xee108160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfd", 0xee108180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfdp", 0xee1081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfdm", 0xee1081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfdz", 0xee1081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfe", 0xee188100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfep", 0xee188120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfem", 0xee188140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"mnfez", 0xee188160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"abss", 0xee208100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"abssp", 0xee208120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"abssm", 0xee208140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"abssz", 0xee208160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"absd", 0xee208180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"absdp", 0xee2081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"absdm", 0xee2081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"absdz", 0xee2081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"abse", 0xee288100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"absep", 0xee288120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"absem", 0xee288140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"absez", 0xee288160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"rnds", 0xee308100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rndsp", 0xee308120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rndsm", 0xee308140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rndsz", 0xee308160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rndd", 0xee308180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rnddp", 0xee3081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rnddm", 0xee3081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rnddz", 0xee3081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rnde", 0xee388100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rndep", 0xee388120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rndem", 0xee388140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"rndez", 0xee388160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"sqts", 0xee408100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqtsp", 0xee408120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqtsm", 0xee408140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqtsz", 0xee408160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqtd", 0xee408180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqtdp", 0xee4081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqtdm", 0xee4081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqtdz", 0xee4081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqte", 0xee488100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqtep", 0xee488120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqtem", 0xee488140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sqtez", 0xee488160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"logs", 0xee508100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"logsp", 0xee508120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"logsm", 0xee508140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"logsz", 0xee508160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"logd", 0xee508180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"logdp", 0xee5081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"logdm", 0xee5081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"logdz", 0xee5081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"loge", 0xee588100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"logep", 0xee588120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"logem", 0xee588140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"logez", 0xee588160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"lgns", 0xee608100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgnsp", 0xee608120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgnsm", 0xee608140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgnsz", 0xee608160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgnd", 0xee608180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgndp", 0xee6081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgndm", 0xee6081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgndz", 0xee6081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgne", 0xee688100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgnep", 0xee688120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgnem", 0xee688140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"lgnez", 0xee688160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"exps", 0xee708100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expsp", 0xee708120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expsm", 0xee708140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expsz", 0xee708160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expd", 0xee708180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expdp", 0xee7081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expdm", 0xee7081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expdz", 0xee7081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expe", 0xee788100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expep", 0xee788120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expem", 0xee788140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"expdz", 0xee788160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"sins", 0xee808100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sinsp", 0xee808120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sinsm", 0xee808140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sinsz", 0xee808160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sind", 0xee808180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sindp", 0xee8081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sindm", 0xee8081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sindz", 0xee8081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sine", 0xee888100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sinep", 0xee888120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sinem", 0xee888140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"sinez", 0xee888160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"coss", 0xee908100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cossp", 0xee908120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cossm", 0xee908140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cossz", 0xee908160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cosd", 0xee908180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cosdp", 0xee9081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cosdm", 0xee9081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cosdz", 0xee9081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cose", 0xee988100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cosep", 0xee988120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cosem", 0xee988140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"cosez", 0xee988160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"tans", 0xeea08100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tansp", 0xeea08120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tansm", 0xeea08140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tansz", 0xeea08160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tand", 0xeea08180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tandp", 0xeea081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tandm", 0xeea081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tandz", 0xeea081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tane", 0xeea88100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tanep", 0xeea88120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tanem", 0xeea88140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"tanez", 0xeea88160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"asns", 0xeeb08100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asnsp", 0xeeb08120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asnsm", 0xeeb08140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asnsz", 0xeeb08160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asnd", 0xeeb08180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asndp", 0xeeb081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asndm", 0xeeb081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asndz", 0xeeb081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asne", 0xeeb88100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asnep", 0xeeb88120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asnem", 0xeeb88140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"asnez", 0xeeb88160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"acss", 0xeec08100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acssp", 0xeec08120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acssm", 0xeec08140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acssz", 0xeec08160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acsd", 0xeec08180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acsdp", 0xeec081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acsdm", 0xeec081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acsdz", 0xeec081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acse", 0xeec88100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acsep", 0xeec88120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acsem", 0xeec88140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"acsez", 0xeec88160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"atns", 0xeed08100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atnsp", 0xeed08120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atnsm", 0xeed08140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atnsz", 0xeed08160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atnd", 0xeed08180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atndp", 0xeed081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atndm", 0xeed081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atndz", 0xeed081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atne", 0xeed88100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atnep", 0xeed88120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atnem", 0xeed88140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"atnez", 0xeed88160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"urds", 0xeee08100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urdsp", 0xeee08120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urdsm", 0xeee08140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urdsz", 0xeee08160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urdd", 0xeee08180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urddp", 0xeee081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urddm", 0xeee081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urddz", 0xeee081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urde", 0xeee88100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urdep", 0xeee88120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urdem", 0xeee88140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"urdez", 0xeee88160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"nrms", 0xeef08100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrmsp", 0xeef08120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrmsm", 0xeef08140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrmsz", 0xeef08160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrmd", 0xeef08180, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrmdp", 0xeef081a0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrmdm", 0xeef081c0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrmdz", 0xeef081e0, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrme", 0xeef88100, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrmep", 0xeef88120, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrmem", 0xeef88140, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| {"nrmez", 0xeef88160, 3, FPU_FPA_EXT_V1, do_fpa_monadic}, |
| |
| {"adfs", 0xee000100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfsp", 0xee000120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfsm", 0xee000140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfsz", 0xee000160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfd", 0xee000180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfdp", 0xee0001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfdm", 0xee0001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfdz", 0xee0001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfe", 0xee080100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfep", 0xee080120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfem", 0xee080140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"adfez", 0xee080160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"sufs", 0xee200100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufsp", 0xee200120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufsm", 0xee200140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufsz", 0xee200160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufd", 0xee200180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufdp", 0xee2001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufdm", 0xee2001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufdz", 0xee2001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufe", 0xee280100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufep", 0xee280120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufem", 0xee280140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"sufez", 0xee280160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"rsfs", 0xee300100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfsp", 0xee300120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfsm", 0xee300140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfsz", 0xee300160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfd", 0xee300180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfdp", 0xee3001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfdm", 0xee3001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfdz", 0xee3001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfe", 0xee380100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfep", 0xee380120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfem", 0xee380140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rsfez", 0xee380160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"mufs", 0xee100100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufsp", 0xee100120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufsm", 0xee100140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufsz", 0xee100160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufd", 0xee100180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufdp", 0xee1001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufdm", 0xee1001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufdz", 0xee1001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufe", 0xee180100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufep", 0xee180120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufem", 0xee180140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"mufez", 0xee180160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"dvfs", 0xee400100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfsp", 0xee400120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfsm", 0xee400140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfsz", 0xee400160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfd", 0xee400180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfdp", 0xee4001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfdm", 0xee4001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfdz", 0xee4001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfe", 0xee480100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfep", 0xee480120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfem", 0xee480140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"dvfez", 0xee480160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"rdfs", 0xee500100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfsp", 0xee500120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfsm", 0xee500140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfsz", 0xee500160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfd", 0xee500180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfdp", 0xee5001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfdm", 0xee5001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfdz", 0xee5001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfe", 0xee580100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfep", 0xee580120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfem", 0xee580140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rdfez", 0xee580160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"pows", 0xee600100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powsp", 0xee600120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powsm", 0xee600140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powsz", 0xee600160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powd", 0xee600180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powdp", 0xee6001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powdm", 0xee6001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powdz", 0xee6001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powe", 0xee680100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powep", 0xee680120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powem", 0xee680140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"powez", 0xee680160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"rpws", 0xee700100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwsp", 0xee700120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwsm", 0xee700140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwsz", 0xee700160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwd", 0xee700180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwdp", 0xee7001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwdm", 0xee7001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwdz", 0xee7001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwe", 0xee780100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwep", 0xee780120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwem", 0xee780140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rpwez", 0xee780160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"rmfs", 0xee800100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfsp", 0xee800120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfsm", 0xee800140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfsz", 0xee800160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfd", 0xee800180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfdp", 0xee8001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfdm", 0xee8001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfdz", 0xee8001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfe", 0xee880100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfep", 0xee880120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfem", 0xee880140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"rmfez", 0xee880160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"fmls", 0xee900100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmlsp", 0xee900120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmlsm", 0xee900140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmlsz", 0xee900160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmld", 0xee900180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmldp", 0xee9001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmldm", 0xee9001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmldz", 0xee9001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmle", 0xee980100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmlep", 0xee980120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmlem", 0xee980140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fmlez", 0xee980160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"fdvs", 0xeea00100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdvsp", 0xeea00120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdvsm", 0xeea00140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdvsz", 0xeea00160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdvd", 0xeea00180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdvdp", 0xeea001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdvdm", 0xeea001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdvdz", 0xeea001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdve", 0xeea80100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdvep", 0xeea80120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdvem", 0xeea80140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"fdvez", 0xeea80160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"frds", 0xeeb00100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frdsp", 0xeeb00120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frdsm", 0xeeb00140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frdsz", 0xeeb00160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frdd", 0xeeb00180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frddp", 0xeeb001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frddm", 0xeeb001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frddz", 0xeeb001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frde", 0xeeb80100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frdep", 0xeeb80120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frdem", 0xeeb80140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"frdez", 0xeeb80160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"pols", 0xeec00100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"polsp", 0xeec00120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"polsm", 0xeec00140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"polsz", 0xeec00160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"pold", 0xeec00180, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"poldp", 0xeec001a0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"poldm", 0xeec001c0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"poldz", 0xeec001e0, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"pole", 0xeec80100, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"polep", 0xeec80120, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"polem", 0xeec80140, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| {"polez", 0xeec80160, 3, FPU_FPA_EXT_V1, do_fpa_dyadic}, |
| |
| {"cmf", 0xee90f110, 3, FPU_FPA_EXT_V1, do_fpa_cmp}, |
| {"cmfe", 0xeed0f110, 3, FPU_FPA_EXT_V1, do_fpa_cmp}, |
| {"cnf", 0xeeb0f110, 3, FPU_FPA_EXT_V1, do_fpa_cmp}, |
| {"cnfe", 0xeef0f110, 3, FPU_FPA_EXT_V1, do_fpa_cmp}, |
| /* The FPA10 data sheet suggests that the 'E' of cmfe/cnfe should |
| not be an optional suffix, but part of the instruction. To be |
| compatible, we accept either. */ |
| {"cmfe", 0xeed0f110, 4, FPU_FPA_EXT_V1, do_fpa_cmp}, |
| {"cnfe", 0xeef0f110, 4, FPU_FPA_EXT_V1, do_fpa_cmp}, |
| |
| {"flts", 0xee000110, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"fltsp", 0xee000130, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"fltsm", 0xee000150, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"fltsz", 0xee000170, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"fltd", 0xee000190, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"fltdp", 0xee0001b0, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"fltdm", 0xee0001d0, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"fltdz", 0xee0001f0, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"flte", 0xee080110, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"fltep", 0xee080130, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"fltem", 0xee080150, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| {"fltez", 0xee080170, 3, FPU_FPA_EXT_V1, do_fpa_from_reg}, |
| |
| /* The implementation of the FIX instruction is broken on some |
| assemblers, in that it accepts a precision specifier as well as a |
| rounding specifier, despite the fact that this is meaningless. |
| To be more compatible, we accept it as well, though of course it |
| does not set any bits. */ |
| {"fix", 0xee100110, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixp", 0xee100130, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixm", 0xee100150, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixz", 0xee100170, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixsp", 0xee100130, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixsm", 0xee100150, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixsz", 0xee100170, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixdp", 0xee100130, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixdm", 0xee100150, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixdz", 0xee100170, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixep", 0xee100130, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixem", 0xee100150, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| {"fixez", 0xee100170, 3, FPU_FPA_EXT_V1, do_fpa_to_reg}, |
| |
| /* Instructions that were new with the real FPA, call them V2. */ |
| {"lfm", 0xec100200, 3, FPU_FPA_EXT_V2, do_fpa_ldmstm}, |
| {"lfmfd", 0xec900200, 3, FPU_FPA_EXT_V2, do_fpa_ldmstm}, |
| {"lfmea", 0xed100200, 3, FPU_FPA_EXT_V2, do_fpa_ldmstm}, |
| {"sfm", 0xec000200, 3, FPU_FPA_EXT_V2, do_fpa_ldmstm}, |
| {"sfmfd", 0xed000200, 3, FPU_FPA_EXT_V2, do_fpa_ldmstm}, |
| {"sfmea", 0xec800200, 3, FPU_FPA_EXT_V2, do_fpa_ldmstm}, |
| |
| /* VFP V1xD (single precision). */ |
| /* Moves and type conversions. */ |
| {"fcpys", 0xeeb00a40, 5, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"fmrs", 0xee100a10, 4, FPU_VFP_EXT_V1xD, do_vfp_reg_from_sp}, |
| {"fmsr", 0xee000a10, 4, FPU_VFP_EXT_V1xD, do_vfp_sp_from_reg}, |
| {"fmstat", 0xeef1fa10, 6, FPU_VFP_EXT_V1xD, do_empty}, |
| {"fsitos", 0xeeb80ac0, 6, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"fuitos", 0xeeb80a40, 6, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"ftosis", 0xeebd0a40, 6, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"ftosizs", 0xeebd0ac0, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"ftouis", 0xeebc0a40, 6, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"ftouizs", 0xeebc0ac0, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"fmrx", 0xeef00a10, 4, FPU_VFP_EXT_V1xD, do_vfp_reg_from_ctrl}, |
| {"fmxr", 0xeee00a10, 4, FPU_VFP_EXT_V1xD, do_vfp_ctrl_from_reg}, |
| |
| /* Memory operations. */ |
| {"flds", 0xed100a00, 4, FPU_VFP_EXT_V1xD, do_vfp_sp_ldst}, |
| {"fsts", 0xed000a00, 4, FPU_VFP_EXT_V1xD, do_vfp_sp_ldst}, |
| {"fldmias", 0xec900a00, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_ldstmia}, |
| {"fldmfds", 0xec900a00, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_ldstmia}, |
| {"fldmdbs", 0xed300a00, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_ldstmdb}, |
| {"fldmeas", 0xed300a00, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_ldstmdb}, |
| {"fldmiax", 0xec900b00, 7, FPU_VFP_EXT_V1xD, do_vfp_xp_ldstmia}, |
| {"fldmfdx", 0xec900b00, 7, FPU_VFP_EXT_V1xD, do_vfp_xp_ldstmia}, |
| {"fldmdbx", 0xed300b00, 7, FPU_VFP_EXT_V1xD, do_vfp_xp_ldstmdb}, |
| {"fldmeax", 0xed300b00, 7, FPU_VFP_EXT_V1xD, do_vfp_xp_ldstmdb}, |
| {"fstmias", 0xec800a00, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_ldstmia}, |
| {"fstmeas", 0xec800a00, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_ldstmia}, |
| {"fstmdbs", 0xed200a00, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_ldstmdb}, |
| {"fstmfds", 0xed200a00, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_ldstmdb}, |
| {"fstmiax", 0xec800b00, 7, FPU_VFP_EXT_V1xD, do_vfp_xp_ldstmia}, |
| {"fstmeax", 0xec800b00, 7, FPU_VFP_EXT_V1xD, do_vfp_xp_ldstmia}, |
| {"fstmdbx", 0xed200b00, 7, FPU_VFP_EXT_V1xD, do_vfp_xp_ldstmdb}, |
| {"fstmfdx", 0xed200b00, 7, FPU_VFP_EXT_V1xD, do_vfp_xp_ldstmdb}, |
| |
| /* Monadic operations. */ |
| {"fabss", 0xeeb00ac0, 5, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"fnegs", 0xeeb10a40, 5, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"fsqrts", 0xeeb10ac0, 6, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| |
| /* Dyadic operations. */ |
| {"fadds", 0xee300a00, 5, FPU_VFP_EXT_V1xD, do_vfp_sp_dyadic}, |
| {"fsubs", 0xee300a40, 5, FPU_VFP_EXT_V1xD, do_vfp_sp_dyadic}, |
| {"fmuls", 0xee200a00, 5, FPU_VFP_EXT_V1xD, do_vfp_sp_dyadic}, |
| {"fdivs", 0xee800a00, 5, FPU_VFP_EXT_V1xD, do_vfp_sp_dyadic}, |
| {"fmacs", 0xee000a00, 5, FPU_VFP_EXT_V1xD, do_vfp_sp_dyadic}, |
| {"fmscs", 0xee100a00, 5, FPU_VFP_EXT_V1xD, do_vfp_sp_dyadic}, |
| {"fnmuls", 0xee200a40, 6, FPU_VFP_EXT_V1xD, do_vfp_sp_dyadic}, |
| {"fnmacs", 0xee000a40, 6, FPU_VFP_EXT_V1xD, do_vfp_sp_dyadic}, |
| {"fnmscs", 0xee100a40, 6, FPU_VFP_EXT_V1xD, do_vfp_sp_dyadic}, |
| |
| /* Comparisons. */ |
| {"fcmps", 0xeeb40a40, 5, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"fcmpzs", 0xeeb50a40, 6, FPU_VFP_EXT_V1xD, do_vfp_sp_compare_z}, |
| {"fcmpes", 0xeeb40ac0, 6, FPU_VFP_EXT_V1xD, do_vfp_sp_monadic}, |
| {"fcmpezs", 0xeeb50ac0, 7, FPU_VFP_EXT_V1xD, do_vfp_sp_compare_z}, |
| |
| /* VFP V1 (Double precision). */ |
| /* Moves and type conversions. */ |
| {"fcpyd", 0xeeb00b40, 5, FPU_VFP_EXT_V1, do_vfp_dp_monadic}, |
| {"fcvtds", 0xeeb70ac0, 6, FPU_VFP_EXT_V1, do_vfp_dp_sp_cvt}, |
| {"fcvtsd", 0xeeb70bc0, 6, FPU_VFP_EXT_V1, do_vfp_sp_dp_cvt}, |
| {"fmdhr", 0xee200b10, 5, FPU_VFP_EXT_V1, do_vfp_dp_from_reg}, |
| {"fmdlr", 0xee000b10, 5, FPU_VFP_EXT_V1, do_vfp_dp_from_reg}, |
| {"fmrdh", 0xee300b10, 5, FPU_VFP_EXT_V1, do_vfp_reg_from_dp}, |
| {"fmrdl", 0xee100b10, 5, FPU_VFP_EXT_V1, do_vfp_reg_from_dp}, |
| {"fsitod", 0xeeb80bc0, 6, FPU_VFP_EXT_V1, do_vfp_dp_sp_cvt}, |
| {"fuitod", 0xeeb80b40, 6, FPU_VFP_EXT_V1, do_vfp_dp_sp_cvt}, |
| {"ftosid", 0xeebd0b40, 6, FPU_VFP_EXT_V1, do_vfp_sp_dp_cvt}, |
| {"ftosizd", 0xeebd0bc0, 7, FPU_VFP_EXT_V1, do_vfp_sp_dp_cvt}, |
| {"ftouid", 0xeebc0b40, 6, FPU_VFP_EXT_V1, do_vfp_sp_dp_cvt}, |
| {"ftouizd", 0xeebc0bc0, 7, FPU_VFP_EXT_V1, do_vfp_sp_dp_cvt}, |
| |
| /* Memory operations. */ |
| {"fldd", 0xed100b00, 4, FPU_VFP_EXT_V1, do_vfp_dp_ldst}, |
| {"fstd", 0xed000b00, 4, FPU_VFP_EXT_V1, do_vfp_dp_ldst}, |
| {"fldmiad", 0xec900b00, 7, FPU_VFP_EXT_V1, do_vfp_dp_ldstmia}, |
| {"fldmfdd", 0xec900b00, 7, FPU_VFP_EXT_V1, do_vfp_dp_ldstmia}, |
| {"fldmdbd", 0xed300b00, 7, FPU_VFP_EXT_V1, do_vfp_dp_ldstmdb}, |
| {"fldmead", 0xed300b00, 7, FPU_VFP_EXT_V1, do_vfp_dp_ldstmdb}, |
| {"fstmiad", 0xec800b00, 7, FPU_VFP_EXT_V1, do_vfp_dp_ldstmia}, |
| {"fstmead", 0xec800b00, 7, FPU_VFP_EXT_V1, do_vfp_dp_ldstmia}, |
| {"fstmdbd", 0xed200b00, 7, FPU_VFP_EXT_V1, do_vfp_dp_ldstmdb}, |
| {"fstmfdd", 0xed200b00, 7, FPU_VFP_EXT_V1, do_vfp_dp_ldstmdb}, |
| |
| /* Monadic operations. */ |
| {"fabsd", 0xeeb00bc0, 5, FPU_VFP_EXT_V1, do_vfp_dp_monadic}, |
| {"fnegd", 0xeeb10b40, 5, FPU_VFP_EXT_V1, do_vfp_dp_monadic}, |
| {"fsqrtd", 0xeeb10bc0, 6, FPU_VFP_EXT_V1, do_vfp_dp_monadic}, |
| |
| /* Dyadic operations. */ |
| {"faddd", 0xee300b00, 5, FPU_VFP_EXT_V1, do_vfp_dp_dyadic}, |
| {"fsubd", 0xee300b40, 5, FPU_VFP_EXT_V1, do_vfp_dp_dyadic}, |
| {"fmuld", 0xee200b00, 5, FPU_VFP_EXT_V1, do_vfp_dp_dyadic}, |
| {"fdivd", 0xee800b00, 5, FPU_VFP_EXT_V1, do_vfp_dp_dyadic}, |
| {"fmacd", 0xee000b00, 5, FPU_VFP_EXT_V1, do_vfp_dp_dyadic}, |
| {"fmscd", 0xee100b00, 5, FPU_VFP_EXT_V1, do_vfp_dp_dyadic}, |
| {"fnmuld", 0xee200b40, 6, FPU_VFP_EXT_V1, do_vfp_dp_dyadic}, |
| {"fnmacd", 0xee000b40, 6, FPU_VFP_EXT_V1, do_vfp_dp_dyadic}, |
| {"fnmscd", 0xee100b40, 6, FPU_VFP_EXT_V1, do_vfp_dp_dyadic}, |
| |
| /* Comparisons. */ |
| {"fcmpd", 0xeeb40b40, 5, FPU_VFP_EXT_V1, do_vfp_dp_monadic}, |
| {"fcmpzd", 0xeeb50b40, 6, FPU_VFP_EXT_V1, do_vfp_dp_compare_z}, |
| {"fcmped", 0xeeb40bc0, 6, FPU_VFP_EXT_V1, do_vfp_dp_monadic}, |
| {"fcmpezd", 0xeeb50bc0, 7, FPU_VFP_EXT_V1, do_vfp_dp_compare_z}, |
| |
| /* VFP V2. */ |
| {"fmsrr", 0xec400a10, 5, FPU_VFP_EXT_V2, do_vfp_sp_reg2}, |
| {"fmrrs", 0xec500a10, 5, FPU_VFP_EXT_V2, do_vfp_sp_reg2}, |
| {"fmdrr", 0xec400b10, 5, FPU_VFP_EXT_V2, do_vfp_dp_from_reg2}, |
| {"fmrrd", 0xec500b10, 5, FPU_VFP_EXT_V2, do_vfp_reg2_from_dp}, |
| |
| /* Intel XScale extensions to ARM V5 ISA. (All use CP0). */ |
| {"mia", 0xee200010, 3, ARM_CEXT_XSCALE, do_xsc_mia}, |
| {"miaph", 0xee280010, 5, ARM_CEXT_XSCALE, do_xsc_mia}, |
| {"miabb", 0xee2c0010, 5, ARM_CEXT_XSCALE, do_xsc_mia}, |
| {"miabt", 0xee2d0010, 5, ARM_CEXT_XSCALE, do_xsc_mia}, |
| {"miatb", 0xee2e0010, 5, ARM_CEXT_XSCALE, do_xsc_mia}, |
| {"miatt", 0xee2f0010, 5, ARM_CEXT_XSCALE, do_xsc_mia}, |
| {"mar", 0xec400000, 3, ARM_CEXT_XSCALE, do_xsc_mar}, |
| {"mra", 0xec500000, 3, ARM_CEXT_XSCALE, do_xsc_mra}, |
| |
| /* Cirrus Maverick instructions. */ |
| {"cfldrs", 0xec100400, 6, ARM_CEXT_MAVERICK, do_mav_ldst_1}, |
| {"cfldrd", 0xec500400, 6, ARM_CEXT_MAVERICK, do_mav_ldst_2}, |
| {"cfldr32", 0xec100500, 7, ARM_CEXT_MAVERICK, do_mav_ldst_3}, |
| {"cfldr64", 0xec500500, 7, ARM_CEXT_MAVERICK, do_mav_ldst_4}, |
| {"cfstrs", 0xec000400, 6, ARM_CEXT_MAVERICK, do_mav_ldst_1}, |
| {"cfstrd", 0xec400400, 6, ARM_CEXT_MAVERICK, do_mav_ldst_2}, |
| {"cfstr32", 0xec000500, 7, ARM_CEXT_MAVERICK, do_mav_ldst_3}, |
| {"cfstr64", 0xec400500, 7, ARM_CEXT_MAVERICK, do_mav_ldst_4}, |
| {"cfmvsr", 0xee000450, 6, ARM_CEXT_MAVERICK, do_mav_binops_2a}, |
| {"cfmvrs", 0xee100450, 6, ARM_CEXT_MAVERICK, do_mav_binops_1a}, |
| {"cfmvdlr", 0xee000410, 7, ARM_CEXT_MAVERICK, do_mav_binops_2b}, |
| {"cfmvrdl", 0xee100410, 7, ARM_CEXT_MAVERICK, do_mav_binops_1b}, |
| {"cfmvdhr", 0xee000430, 7, ARM_CEXT_MAVERICK, do_mav_binops_2b}, |
| {"cfmvrdh", 0xee100430, 7, ARM_CEXT_MAVERICK, do_mav_binops_1b}, |
| {"cfmv64lr", 0xee000510, 8, ARM_CEXT_MAVERICK, do_mav_binops_2c}, |
| {"cfmvr64l", 0xee100510, 8, ARM_CEXT_MAVERICK, do_mav_binops_1c}, |
| {"cfmv64hr", 0xee000530, 8, ARM_CEXT_MAVERICK, do_mav_binops_2c}, |
| {"cfmvr64h", 0xee100530, 8, ARM_CEXT_MAVERICK, do_mav_binops_1c}, |
| {"cfmval32", 0xee100610, 8, ARM_CEXT_MAVERICK, do_mav_binops_3a}, |
| {"cfmv32al", 0xee000610, 8, ARM_CEXT_MAVERICK, do_mav_binops_3b}, |
| {"cfmvam32", 0xee100630, 8, ARM_CEXT_MAVERICK, do_mav_binops_3a}, |
| {"cfmv32am", 0xee000630, 8, ARM_CEXT_MAVERICK, do_mav_binops_3b}, |
| {"cfmvah32", 0xee100650, 8, ARM_CEXT_MAVERICK, do_mav_binops_3a}, |
| {"cfmv32ah", 0xee000650, 8, ARM_CEXT_MAVERICK, do_mav_binops_3b}, |
| {"cfmva32", 0xee100670, 7, ARM_CEXT_MAVERICK, do_mav_binops_3a}, |
| {"cfmv32a", 0xee000670, 7, ARM_CEXT_MAVERICK, do_mav_binops_3b}, |
| {"cfmva64", 0xee100690, 7, ARM_CEXT_MAVERICK, do_mav_binops_3c}, |
| {"cfmv64a", 0xee000690, 7, ARM_CEXT_MAVERICK, do_mav_binops_3d}, |
| {"cfmvsc32", 0xee1006b0, 8, ARM_CEXT_MAVERICK, do_mav_dspsc_1}, |
| {"cfmv32sc", 0xee0006b0, 8, ARM_CEXT_MAVERICK, do_mav_dspsc_2}, |
| {"cfcpys", 0xee000400, 6, ARM_CEXT_MAVERICK, do_mav_binops_1d}, |
| {"cfcpyd", 0xee000420, 6, ARM_CEXT_MAVERICK, do_mav_binops_1e}, |
| {"cfcvtsd", 0xee000460, 7, ARM_CEXT_MAVERICK, do_mav_binops_1f}, |
| {"cfcvtds", 0xee000440, 7, ARM_CEXT_MAVERICK, do_mav_binops_1g}, |
| {"cfcvt32s", 0xee000480, 8, ARM_CEXT_MAVERICK, do_mav_binops_1h}, |
| {"cfcvt32d", 0xee0004a0, 8, ARM_CEXT_MAVERICK, do_mav_binops_1i}, |
| {"cfcvt64s", 0xee0004c0, 8, ARM_CEXT_MAVERICK, do_mav_binops_1j}, |
| {"cfcvt64d", 0xee0004e0, 8, ARM_CEXT_MAVERICK, do_mav_binops_1k}, |
| {"cfcvts32", 0xee100580, 8, ARM_CEXT_MAVERICK, do_mav_binops_1l}, |
| {"cfcvtd32", 0xee1005a0, 8, ARM_CEXT_MAVERICK, do_mav_binops_1m}, |
| {"cftruncs32", 0xee1005c0, 10, ARM_CEXT_MAVERICK, do_mav_binops_1l}, |
| {"cftruncd32", 0xee1005e0, 10, ARM_CEXT_MAVERICK, do_mav_binops_1m}, |
| {"cfrshl32", 0xee000550, 8, ARM_CEXT_MAVERICK, do_mav_triple_4a}, |
| {"cfrshl64", 0xee000570, 8, ARM_CEXT_MAVERICK, do_mav_triple_4b}, |
| {"cfsh32", 0xee000500, 6, ARM_CEXT_MAVERICK, do_mav_shift_1}, |
| {"cfsh64", 0xee200500, 6, ARM_CEXT_MAVERICK, do_mav_shift_2}, |
| {"cfcmps", 0xee100490, 6, ARM_CEXT_MAVERICK, do_mav_triple_5a}, |
| {"cfcmpd", 0xee1004b0, 6, ARM_CEXT_MAVERICK, do_mav_triple_5b}, |
| {"cfcmp32", 0xee100590, 7, ARM_CEXT_MAVERICK, do_mav_triple_5c}, |
| {"cfcmp64", 0xee1005b0, 7, ARM_CEXT_MAVERICK, do_mav_triple_5d}, |
| {"cfabss", 0xee300400, 6, ARM_CEXT_MAVERICK, do_mav_binops_1d}, |
| {"cfabsd", 0xee300420, 6, ARM_CEXT_MAVERICK, do_mav_binops_1e}, |
| {"cfnegs", 0xee300440, 6, ARM_CEXT_MAVERICK, do_mav_binops_1d}, |
| {"cfnegd", 0xee300460, 6, ARM_CEXT_MAVERICK, do_mav_binops_1e}, |
| {"cfadds", 0xee300480, 6, ARM_CEXT_MAVERICK, do_mav_triple_5e}, |
| {"cfaddd", 0xee3004a0, 6, ARM_CEXT_MAVERICK, do_mav_triple_5f}, |
| {"cfsubs", 0xee3004c0, 6, ARM_CEXT_MAVERICK, do_mav_triple_5e}, |
| {"cfsubd", 0xee3004e0, 6, ARM_CEXT_MAVERICK, do_mav_triple_5f}, |
| {"cfmuls", 0xee100400, 6, ARM_CEXT_MAVERICK, do_mav_triple_5e}, |
| {"cfmuld", 0xee100420, 6, ARM_CEXT_MAVERICK, do_mav_triple_5f}, |
| {"cfabs32", 0xee300500, 7, ARM_CEXT_MAVERICK, do_mav_binops_1n}, |
| {"cfabs64", 0xee300520, 7, ARM_CEXT_MAVERICK, do_mav_binops_1o}, |
| {"cfneg32", 0xee300540, 7, ARM_CEXT_MAVERICK, do_mav_binops_1n}, |
| {"cfneg64", 0xee300560, 7, ARM_CEXT_MAVERICK, do_mav_binops_1o}, |
| {"cfadd32", 0xee300580, 7, ARM_CEXT_MAVERICK, do_mav_triple_5g}, |
| {"cfadd64", 0xee3005a0, 7, ARM_CEXT_MAVERICK, do_mav_triple_5h}, |
| {"cfsub32", 0xee3005c0, 7, ARM_CEXT_MAVERICK, do_mav_triple_5g}, |
| {"cfsub64", 0xee3005e0, 7, ARM_CEXT_MAVERICK, do_mav_triple_5h}, |
| {"cfmul32", 0xee100500, 7, ARM_CEXT_MAVERICK, do_mav_triple_5g}, |
| {"cfmul64", 0xee100520, 7, ARM_CEXT_MAVERICK, do_mav_triple_5h}, |
| {"cfmac32", 0xee100540, 7, ARM_CEXT_MAVERICK, do_mav_triple_5g}, |
| {"cfmsc32", 0xee100560, 7, ARM_CEXT_MAVERICK, do_mav_triple_5g}, |
| {"cfmadd32", 0xee000600, 8, ARM_CEXT_MAVERICK, do_mav_quad_6a}, |
| {"cfmsub32", 0xee100600, 8, ARM_CEXT_MAVERICK, do_mav_quad_6a}, |
| {"cfmadda32", 0xee200600, 9, ARM_CEXT_MAVERICK, do_mav_quad_6b}, |
| {"cfmsuba32", 0xee300600, 9, ARM_CEXT_MAVERICK, do_mav_quad_6b}, |
| }; |
| |
| /* Defines for various bits that we will want to toggle. */ |
| #define INST_IMMEDIATE 0x02000000 |
| #define OFFSET_REG 0x02000000 |
| #define HWOFFSET_IMM 0x00400000 |
| #define SHIFT_BY_REG 0x00000010 |
| #define PRE_INDEX 0x01000000 |
| #define INDEX_UP 0x00800000 |
| #define WRITE_BACK 0x00200000 |
| #define LDM_TYPE_2_OR_3 0x00400000 |
| |
| #define LITERAL_MASK 0xf000f000 |
| #define OPCODE_MASK 0xfe1fffff |
| #define V4_STR_BIT 0x00000020 |
| |
| #define DATA_OP_SHIFT 21 |
| |
| /* Codes to distinguish the arithmetic instructions. */ |
| #define OPCODE_AND 0 |
| #define OPCODE_EOR 1 |
| #define OPCODE_SUB 2 |
| #define OPCODE_RSB 3 |
| #define OPCODE_ADD 4 |
| #define OPCODE_ADC 5 |
| #define OPCODE_SBC 6 |
| #define OPCODE_RSC 7 |
| #define OPCODE_TST 8 |
| #define OPCODE_TEQ 9 |
| #define OPCODE_CMP 10 |
| #define OPCODE_CMN 11 |
| #define OPCODE_ORR 12 |
| #define OPCODE_MOV 13 |
| #define OPCODE_BIC 14 |
| #define OPCODE_MVN 15 |
| |
| /* Thumb v1 (ARMv4T). */ |
| static void do_t_nop PARAMS ((char *)); |
| static void do_t_arit PARAMS ((char *)); |
| static void do_t_add PARAMS ((char *)); |
| static void do_t_asr PARAMS ((char *)); |
| static void do_t_branch9 PARAMS ((char *)); |
| static void do_t_branch12 PARAMS ((char *)); |
| static void do_t_branch23 PARAMS ((char *)); |
| static void do_t_bx PARAMS ((char *)); |
| static void do_t_compare PARAMS ((char *)); |
| static void do_t_ldmstm PARAMS ((char *)); |
| static void do_t_ldr PARAMS ((char *)); |
| static void do_t_ldrb PARAMS ((char *)); |
| static void do_t_ldrh PARAMS ((char *)); |
| static void do_t_lds PARAMS ((char *)); |
| static void do_t_lsl PARAMS ((char *)); |
| static void do_t_lsr PARAMS ((char *)); |
| static void do_t_mov PARAMS ((char *)); |
| static void do_t_push_pop PARAMS ((char *)); |
| static void do_t_str PARAMS ((char *)); |
| static void do_t_strb PARAMS ((char *)); |
| static void do_t_strh PARAMS ((char *)); |
| static void do_t_sub PARAMS ((char *)); |
| static void do_t_swi PARAMS ((char *)); |
| static void do_t_adr PARAMS ((char *)); |
| |
| /* Thumb v2 (ARMv5T). */ |
| static void do_t_blx PARAMS ((char *)); |
| static void do_t_bkpt PARAMS ((char *)); |
| |
| #define T_OPCODE_MUL 0x4340 |
| #define T_OPCODE_TST 0x4200 |
| #define T_OPCODE_CMN 0x42c0 |
| #define T_OPCODE_NEG 0x4240 |
| #define T_OPCODE_MVN 0x43c0 |
| |
| #define T_OPCODE_ADD_R3 0x1800 |
| #define T_OPCODE_SUB_R3 0x1a00 |
| #define T_OPCODE_ADD_HI 0x4400 |
| #define T_OPCODE_ADD_ST 0xb000 |
| #define T_OPCODE_SUB_ST 0xb080 |
| #define T_OPCODE_ADD_SP 0xa800 |
| #define T_OPCODE_ADD_PC 0xa000 |
| #define T_OPCODE_ADD_I8 0x3000 |
| #define T_OPCODE_SUB_I8 0x3800 |
| #define T_OPCODE_ADD_I3 0x1c00 |
| #define T_OPCODE_SUB_I3 0x1e00 |
| |
| #define T_OPCODE_ASR_R 0x4100 |
| #define T_OPCODE_LSL_R 0x4080 |
| #define T_OPCODE_LSR_R 0x40c0 |
| #define T_OPCODE_ASR_I 0x1000 |
| #define T_OPCODE_LSL_I 0x0000 |
| #define T_OPCODE_LSR_I 0x0800 |
| |
| #define T_OPCODE_MOV_I8 0x2000 |
| #define T_OPCODE_CMP_I8 0x2800 |
| #define T_OPCODE_CMP_LR 0x4280 |
| #define T_OPCODE_MOV_HR 0x4600 |
| #define T_OPCODE_CMP_HR 0x4500 |
| |
| #define T_OPCODE_LDR_PC 0x4800 |
| #define T_OPCODE_LDR_SP 0x9800 |
| #define T_OPCODE_STR_SP 0x9000 |
| #define T_OPCODE_LDR_IW 0x6800 |
| #define T_OPCODE_STR_IW 0x6000 |
| #define T_OPCODE_LDR_IH 0x8800 |
| #define T_OPCODE_STR_IH 0x8000 |
| #define T_OPCODE_LDR_IB 0x7800 |
| #define T_OPCODE_STR_IB 0x7000 |
| #define T_OPCODE_LDR_RW 0x5800 |
| #define T_OPCODE_STR_RW 0x5000 |
| #define T_OPCODE_LDR_RH 0x5a00 |
| #define T_OPCODE_STR_RH 0x5200 |
| #define T_OPCODE_LDR_RB 0x5c00 |
| #define T_OPCODE_STR_RB 0x5400 |
| |
| #define T_OPCODE_PUSH 0xb400 |
| #define T_OPCODE_POP 0xbc00 |
| |
| #define T_OPCODE_BRANCH 0xe7fe |
| |
| static int thumb_reg PARAMS ((char ** str, int hi_lo)); |
| |
| #define THUMB_SIZE 2 /* Size of thumb instruction. */ |
| #define THUMB_REG_LO 0x1 |
| #define THUMB_REG_HI 0x2 |
| #define THUMB_REG_ANY 0x3 |
| |
| #define THUMB_H1 0x0080 |
| #define THUMB_H2 0x0040 |
| |
| #define THUMB_ASR 0 |
| #define THUMB_LSL 1 |
| #define THUMB_LSR 2 |
| |
| #define THUMB_MOVE 0 |
| #define THUMB_COMPARE 1 |
| |
| #define THUMB_LOAD 0 |
| #define THUMB_STORE 1 |
| |
| #define THUMB_PP_PC_LR 0x0100 |
| |
| /* These three are used for immediate shifts, do not alter. */ |
| #define THUMB_WORD 2 |
| #define THUMB_HALFWORD 1 |
| #define THUMB_BYTE 0 |
| |
| struct thumb_opcode |
| { |
| /* Basic string to match. */ |
| const char * template; |
| |
| /* Basic instruction code. */ |
| unsigned long value; |
| |
| int size; |
| |
| /* Which CPU variants this exists for. */ |
| unsigned long variant; |
| |
| /* Function to call to parse args. */ |
| void (* parms) PARAMS ((char *)); |
| }; |
| |
| static const struct thumb_opcode tinsns[] = |
| { |
| /* Thumb v1 (ARMv4T). */ |
| {"adc", 0x4140, 2, ARM_EXT_V4T, do_t_arit}, |
| {"add", 0x0000, 2, ARM_EXT_V4T, do_t_add}, |
| {"and", 0x4000, 2, ARM_EXT_V4T, do_t_arit}, |
| {"asr", 0x0000, 2, ARM_EXT_V4T, do_t_asr}, |
| {"b", T_OPCODE_BRANCH, 2, ARM_EXT_V4T, do_t_branch12}, |
| {"beq", 0xd0fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bne", 0xd1fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bcs", 0xd2fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bhs", 0xd2fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bcc", 0xd3fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bul", 0xd3fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"blo", 0xd3fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bmi", 0xd4fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bpl", 0xd5fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bvs", 0xd6fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bvc", 0xd7fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bhi", 0xd8fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bls", 0xd9fe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bge", 0xdafe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"blt", 0xdbfe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bgt", 0xdcfe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"ble", 0xddfe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bal", 0xdefe, 2, ARM_EXT_V4T, do_t_branch9}, |
| {"bic", 0x4380, 2, ARM_EXT_V4T, do_t_arit}, |
| {"bl", 0xf7fffffe, 4, ARM_EXT_V4T, do_t_branch23}, |
| {"bx", 0x4700, 2, ARM_EXT_V4T, do_t_bx}, |
| {"cmn", T_OPCODE_CMN, 2, ARM_EXT_V4T, do_t_arit}, |
| {"cmp", 0x0000, 2, ARM_EXT_V4T, do_t_compare}, |
| {"eor", 0x4040, 2, ARM_EXT_V4T, do_t_arit}, |
| {"ldmia", 0xc800, 2, ARM_EXT_V4T, do_t_ldmstm}, |
| {"ldr", 0x0000, 2, ARM_EXT_V4T, do_t_ldr}, |
| {"ldrb", 0x0000, 2, ARM_EXT_V4T, do_t_ldrb}, |
| {"ldrh", 0x0000, 2, ARM_EXT_V4T, do_t_ldrh}, |
| {"ldrsb", 0x5600, 2, ARM_EXT_V4T, do_t_lds}, |
| {"ldrsh", 0x5e00, 2, ARM_EXT_V4T, do_t_lds}, |
| {"ldsb", 0x5600, 2, ARM_EXT_V4T, do_t_lds}, |
| {"ldsh", 0x5e00, 2, ARM_EXT_V4T, do_t_lds}, |
| {"lsl", 0x0000, 2, ARM_EXT_V4T, do_t_lsl}, |
| {"lsr", 0x0000, 2, ARM_EXT_V4T, do_t_lsr}, |
| {"mov", 0x0000, 2, ARM_EXT_V4T, do_t_mov}, |
| {"mul", T_OPCODE_MUL, 2, ARM_EXT_V4T, do_t_arit}, |
| {"mvn", T_OPCODE_MVN, 2, ARM_EXT_V4T, do_t_arit}, |
| {"neg", T_OPCODE_NEG, 2, ARM_EXT_V4T, do_t_arit}, |
| {"orr", 0x4300, 2, ARM_EXT_V4T, do_t_arit}, |
| {"pop", 0xbc00, 2, ARM_EXT_V4T, do_t_push_pop}, |
| {"push", 0xb400, 2, ARM_EXT_V4T, do_t_push_pop}, |
| {"ror", 0x41c0, 2, ARM_EXT_V4T, do_t_arit}, |
| {"sbc", 0x4180, 2, ARM_EXT_V4T, do_t_arit}, |
| {"stmia", 0xc000, 2, ARM_EXT_V4T, do_t_ldmstm}, |
| {"str", 0x0000, 2, ARM_EXT_V4T, do_t_str}, |
| {"strb", 0x0000, 2, ARM_EXT_V4T, do_t_strb}, |
| {"strh", 0x0000, 2, ARM_EXT_V4T, do_t_strh}, |
| {"swi", 0xdf00, 2, ARM_EXT_V4T, do_t_swi}, |
| {"sub", 0x0000, 2, ARM_EXT_V4T, do_t_sub}, |
| {"tst", T_OPCODE_TST, 2, ARM_EXT_V4T, do_t_arit}, |
| /* Pseudo ops: */ |
| {"adr", 0x0000, 2, ARM_EXT_V4T, do_t_adr}, |
| {"nop", 0x46C0, 2, ARM_EXT_V4T, do_t_nop}, /* mov r8,r8 */ |
| /* Thumb v2 (ARMv5T). */ |
| {"blx", 0, 0, ARM_EXT_V5T, do_t_blx}, |
| {"bkpt", 0xbe00, 2, ARM_EXT_V5T, do_t_bkpt}, |
| }; |
| |
| #define BAD_ARGS _("bad arguments to instruction") |
| #define BAD_PC _("r15 not allowed here") |
| #define BAD_COND _("instruction is not conditional") |
| #define ERR_NO_ACCUM _("acc0 expected") |
| |
| static struct hash_control * arm_ops_hsh = NULL; |
| static struct hash_control * arm_tops_hsh = NULL; |
| static struct hash_control * arm_cond_hsh = NULL; |
| static struct hash_control * arm_shift_hsh = NULL; |
| static struct hash_control * arm_psr_hsh = NULL; |
| |
| /* This table describes all the machine specific pseudo-ops the assembler |
| has to support. The fields are: |
| pseudo-op name without dot |
| function to call to execute this pseudo-op |
| Integer arg to pass to the function. */ |
| |
| static void s_req PARAMS ((int)); |
| static void s_align PARAMS ((int)); |
| static void s_bss PARAMS ((int)); |
| static void s_even PARAMS ((int)); |
| static void s_ltorg PARAMS ((int)); |
| static void s_arm PARAMS ((int)); |
| static void s_thumb PARAMS ((int)); |
| static void s_code PARAMS ((int)); |
| static void s_force_thumb PARAMS ((int)); |
| static void s_thumb_func PARAMS ((int)); |
| static void s_thumb_set PARAMS ((int)); |
| #ifdef OBJ_ELF |
| static void s_arm_elf_cons PARAMS ((int)); |
| #endif |
| |
| static int my_get_expression PARAMS ((expressionS *, char **)); |
| |
| const pseudo_typeS md_pseudo_table[] = |
| { |
| /* Never called becasue '.req' does not start line. */ |
| { "req", s_req, 0 }, |
| { "bss", s_bss, 0 }, |
| { "align", s_align, 0 }, |
| { "arm", s_arm, 0 }, |
| { "thumb", s_thumb, 0 }, |
| { "code", s_code, 0 }, |
| { "force_thumb", s_force_thumb, 0 }, |
| { "thumb_func", s_thumb_func, 0 }, |
| { "thumb_set", s_thumb_set, 0 }, |
| { "even", s_even, 0 }, |
| { "ltorg", s_ltorg, 0 }, |
| { "pool", s_ltorg, 0 }, |
| #ifdef OBJ_ELF |
| { "word", s_arm_elf_cons, 4 }, |
| { "long", s_arm_elf_cons, 4 }, |
| { "file", (void (*) PARAMS ((int))) dwarf2_directive_file, 0 }, |
| { "loc", dwarf2_directive_loc, 0 }, |
| #else |
| { "word", cons, 4}, |
| #endif |
| { "extend", float_cons, 'x' }, |
| { "ldouble", float_cons, 'x' }, |
| { "packed", float_cons, 'p' }, |
| { 0, 0, 0 } |
| }; |
| |
| /* Other internal functions. */ |
| static int arm_parse_extension PARAMS ((char *, int *)); |
| static int arm_parse_cpu PARAMS ((char *)); |
| static int arm_parse_arch PARAMS ((char *)); |
| static int arm_parse_fpu PARAMS ((char *)); |
| |
| /* Stuff needed to resolve the label ambiguity |
| As: |
| ... |
| label: <insn> |
| may differ from: |
| ... |
| label: |
| <insn> |
| */ |
| |
| symbolS * last_label_seen; |
| static int label_is_thumb_function_name = FALSE; |
| |
| /* Literal Pool stuff. */ |
| |
| #define MAX_LITERAL_POOL_SIZE 1024 |
| |
| /* Literal pool structure. Held on a per-section |
| and per-sub-section basis. */ |
| typedef struct literal_pool |
| { |
| expressionS literals [MAX_LITERAL_POOL_SIZE]; |
| unsigned int next_free_entry; |
| unsigned int id; |
| symbolS * symbol; |
| segT section; |
| subsegT sub_section; |
| struct literal_pool * next; |
| } literal_pool; |
| |
| /* Pointer to a linked list of literal pools. */ |
| literal_pool * list_of_pools = NULL; |
| |
| static literal_pool * find_literal_pool PARAMS ((void)); |
| static literal_pool * find_or_make_literal_pool PARAMS ((void)); |
| |
| static literal_pool * |
| find_literal_pool () |
| { |
| literal_pool * pool; |
| |
| for (pool = list_of_pools; pool != NULL; pool = pool->next) |
| { |
| if (pool->section == now_seg |
| && pool->sub_section == now_subseg) |
| break; |
| } |
| |
| return pool; |
| } |
| |
| static literal_pool * |
| find_or_make_literal_pool () |
| { |
| /* Next literal pool ID number. */ |
| static unsigned int latest_pool_num = 1; |
| literal_pool * pool; |
| |
| pool = find_literal_pool (); |
| |
| if (pool == NULL) |
| { |
| /* Create a new pool. */ |
| pool = (literal_pool *) xmalloc (sizeof (* pool)); |
| if (! pool) |
| return NULL; |
| |
| pool->next_free_entry = 0; |
| pool->section = now_seg; |
| pool->sub_section = now_subseg; |
| pool->next = list_of_pools; |
| pool->symbol = NULL; |
| |
| /* Add it to the list. */ |
| list_of_pools = pool; |
| } |
| |
| /* New pools, and emptied pools, will have a NULL symbol. */ |
| if (pool->symbol == NULL) |
| { |
| pool->symbol = symbol_create (FAKE_LABEL_NAME, undefined_section, |
| (valueT) 0, &zero_address_frag); |
| pool->id = latest_pool_num ++; |
| } |
| |
| /* Done. */ |
| return pool; |
| } |
| |
| /* Add the literal in the global 'inst' |
| structure to the relevent literal pool. */ |
| static int |
| add_to_lit_pool () |
| { |
| literal_pool * pool; |
| unsigned int entry; |
| |
| pool = find_or_make_literal_pool (); |
| |
| /* Check if this literal value is already in the pool. */ |
| for (entry = 0; entry < pool->next_free_entry; entry ++) |
| { |
| if ((pool->literals[entry].X_op == inst.reloc.exp.X_op) |
| && (inst.reloc.exp.X_op == O_constant) |
| && (pool->literals[entry].X_add_number |
| == inst.reloc.exp.X_add_number) |
| && (pool->literals[entry].X_unsigned |
| == inst.reloc.exp.X_unsigned)) |
| break; |
| |
| if ((pool->literals[entry].X_op == inst.reloc.exp.X_op) |
| && (inst.reloc.exp.X_op == O_symbol) |
| && (pool->literals[entry].X_add_number |
| == inst.reloc.exp.X_add_number) |
| && (pool->literals[entry].X_add_symbol |
| == inst.reloc.exp.X_add_symbol) |
| && (pool->literals[entry].X_op_symbol |
| == inst.reloc.exp.X_op_symbol)) |
| break; |
| } |
| |
| /* Do we need to create a new entry? */ |
| if (entry == pool->next_free_entry) |
| { |
| if (entry >= MAX_LITERAL_POOL_SIZE) |
| { |
| inst.error = _("literal pool overflow"); |
| return FAIL; |
| } |
| |
| pool->literals[entry] = inst.reloc.exp; |
| pool->next_free_entry += 1; |
| } |
| |
| inst.reloc.exp.X_op = O_symbol; |
| inst.reloc.exp.X_add_number = ((int) entry) * 4 - 8; |
| inst.reloc.exp.X_add_symbol = pool->symbol; |
| |
| return SUCCESS; |
| } |
| |
| /* Can't use symbol_new here, so have to create a symbol and then at |
| a later date assign it a value. Thats what these functions do. */ |
| |
| static void |
| symbol_locate (symbolP, name, segment, valu, frag) |
| symbolS * symbolP; |
| const char * name; /* It is copied, the caller can modify. */ |
| segT segment; /* Segment identifier (SEG_<something>). */ |
| valueT valu; /* Symbol value. */ |
| fragS * frag; /* Associated fragment. */ |
| { |
| unsigned int name_length; |
| char * preserved_copy_of_name; |
| |
| name_length = strlen (name) + 1; /* +1 for \0. */ |
| obstack_grow (¬es, name, name_length); |
| preserved_copy_of_name = obstack_finish (¬es); |
| #ifdef STRIP_UNDERSCORE |
| if (preserved_copy_of_name[0] == '_') |
| preserved_copy_of_name++; |
| #endif |
| |
| #ifdef tc_canonicalize_symbol_name |
| preserved_copy_of_name = |
| tc_canonicalize_symbol_name (preserved_copy_of_name); |
| #endif |
| |
| S_SET_NAME (symbolP, preserved_copy_of_name); |
| |
| S_SET_SEGMENT (symbolP, segment); |
| S_SET_VALUE (symbolP, valu); |
| symbol_clear_list_pointers (symbolP); |
| |
| symbol_set_frag (symbolP, frag); |
| |
| /* Link to end of symbol chain. */ |
| { |
| extern int symbol_table_frozen; |
| if (symbol_table_frozen) |
| abort (); |
| } |
| |
| symbol_append (symbolP, symbol_lastP, & symbol_rootP, & symbol_lastP); |
| |
| obj_symbol_new_hook (symbolP); |
| |
| #ifdef tc_symbol_new_hook |
| tc_symbol_new_hook (symbolP); |
| #endif |
| |
| #ifdef DEBUG_SYMS |
| verify_symbol_chain (symbol_rootP, symbol_lastP); |
| #endif /* DEBUG_SYMS */ |
| } |
| |
| /* Check that an immediate is valid. |
| If so, convert it to the right format. */ |
| |
| static unsigned int |
| validate_immediate (val) |
| unsigned int val; |
| { |
| unsigned int a; |
| unsigned int i; |
| |
| #define rotate_left(v, n) (v << n | v >> (32 - n)) |
| |
| for (i = 0; i < 32; i += 2) |
| if ((a = rotate_left (val, i)) <= 0xff) |
| return a | (i << 7); /* 12-bit pack: [shift-cnt,const]. */ |
| |
| return FAIL; |
| } |
| |
| /* Check to see if an immediate can be computed as two seperate immediate |
| values, added together. We already know that this value cannot be |
| computed by just one ARM instruction. */ |
| |
| static unsigned int |
| validate_immediate_twopart (val, highpart) |
| unsigned int val; |
| unsigned int * highpart; |
| { |
| unsigned int a; |
| unsigned int i; |
| |
| for (i = 0; i < 32; i += 2) |
| if (((a = rotate_left (val, i)) & 0xff) != 0) |
| { |
| if (a & 0xff00) |
| { |
| if (a & ~ 0xffff) |
| continue; |
| * highpart = (a >> 8) | ((i + 24) << 7); |
| } |
| else if (a & 0xff0000) |
| { |
| if (a & 0xff000000) |
| continue; |
| * highpart = (a >> 16) | ((i + 16) << 7); |
| } |
| else |
| { |
| assert (a & 0xff000000); |
| * highpart = (a >> 24) | ((i + 8) << 7); |
| } |
| |
| return (a & 0xff) | (i << 7); |
| } |
| |
| return FAIL; |
| } |
| |
| static int |
| validate_offset_imm (val, hwse) |
| unsigned int val; |
| int hwse; |
| { |
| if ((hwse && val > 255) || val > 4095) |
| return FAIL; |
| return val; |
| } |
| |
| static void |
| s_req (a) |
| int a ATTRIBUTE_UNUSED; |
| { |
| as_bad (_("invalid syntax for .req directive")); |
| } |
| |
| static void |
| s_bss (ignore) |
| int ignore ATTRIBUTE_UNUSED; |
| { |
| /* We don't support putting frags in the BSS segment, we fake it by |
| marking in_bss, then looking at s_skip for clues. */ |
| subseg_set (bss_section, 0); |
| demand_empty_rest_of_line (); |
| } |
| |
| static void |
| s_even (ignore) |
| int ignore ATTRIBUTE_UNUSED; |
| { |
| /* Never make frag if expect extra pass. */ |
| if (!need_pass_2) |
| frag_align (1, 0, 0); |
| |
| record_alignment (now_seg, 1); |
| |
| demand_empty_rest_of_line (); |
| } |
| |
| static void |
| s_ltorg (ignored) |
| int ignored ATTRIBUTE_UNUSED; |
| { |
| unsigned int entry; |
| literal_pool * pool; |
| char sym_name[20]; |
| |
| pool = find_literal_pool (); |
| if (pool == NULL |
| || pool->symbol == NULL |
| || pool->next_free_entry == 0) |
| return; |
| |
| /* Align pool as you have word accesses. |
| Only make a frag if we have to. */ |
| if (!need_pass_2) |
| frag_align (2, 0, 0); |
| |
| record_alignment (now_seg, 2); |
| |
| sprintf (sym_name, "$$lit_\002%x", pool->id); |
| |
| symbol_locate (pool->symbol, sym_name, now_seg, |
| (valueT) frag_now_fix (), frag_now); |
| symbol_table_insert (pool->symbol); |
| |
| ARM_SET_THUMB (pool->symbol, thumb_mode); |
| |
| #if defined OBJ_COFF || defined OBJ_ELF |
| ARM_SET_INTERWORK (pool->symbol, support_interwork); |
| #endif |
| |
| for (entry = 0; entry < pool->next_free_entry; entry ++) |
| /* First output the expression in the instruction to the pool. */ |
| emit_expr (&(pool->literals[entry]), 4); /* .word */ |
| |
| /* Mark the pool as empty. */ |
| pool->next_free_entry = 0; |
| pool->symbol = NULL; |
| } |
| |
| /* Same as s_align_ptwo but align 0 => align 2. */ |
| |
| static void |
| s_align (unused) |
| int unused ATTRIBUTE_UNUSED; |
| { |
| register int temp; |
| register long temp_fill; |
| long max_alignment = 15; |
| |
| temp = get_absolute_expression (); |
| if (temp > max_alignment) |
| as_bad (_("alignment too large: %d assumed"), temp = max_alignment); |
| else if (temp < 0) |
| { |
| as_bad (_("alignment negative. 0 assumed.")); |
| temp = 0; |
| } |
| |
| if (*input_line_pointer == ',') |
| { |
| input_line_pointer++; |
| temp_fill = get_absolute_expression (); |
| } |
| else |
| temp_fill = 0; |
| |
| if (!temp) |
| temp = 2; |
| |
| /* Only make a frag if we HAVE to. */ |
| if (temp && !need_pass_2) |
| frag_align (temp, (int) temp_fill, 0); |
| demand_empty_rest_of_line (); |
| |
| record_alignment (now_seg, temp); |
| } |
| |
| static void |
| s_force_thumb (ignore) |
| int ignore ATTRIBUTE_UNUSED; |
| { |
| /* If we are not already in thumb mode go into it, EVEN if |
| the target processor does not support thumb instructions. |
| This is used by gcc/config/arm/lib1funcs.asm for example |
| to compile interworking support functions even if the |
| target processor should not support interworking. */ |
| if (! thumb_mode) |
| { |
| thumb_mode = 2; |
| |
| record_alignment (now_seg, 1); |
| } |
| |
| demand_empty_rest_of_line (); |
| } |
| |
| static void |
| s_thumb_func (ignore) |
| int ignore ATTRIBUTE_UNUSED; |
| { |
| if (! thumb_mode) |
| opcode_select (16); |
| |
| /* The following label is the name/address of the start of a Thumb function. |
| We need to know this for the interworking support. */ |
| label_is_thumb_function_name = TRUE; |
| |
| demand_empty_rest_of_line (); |
| } |
| |
| /* Perform a .set directive, but also mark the alias as |
| being a thumb function. */ |
| |
| static void |
| s_thumb_set (equiv) |
| int equiv; |
| { |
| /* XXX the following is a duplicate of the code for s_set() in read.c |
| We cannot just call that code as we need to get at the symbol that |
| is created. */ |
| register char * name; |
| register char delim; |
| register char * end_name; |
| register symbolS * symbolP; |
| |
| /* Especial apologies for the random logic: |
| This just grew, and could be parsed much more simply! |
| Dean - in haste. */ |
| name = input_line_pointer; |
| delim = get_symbol_end (); |
| end_name = input_line_pointer; |
| *end_name = delim; |
| |
| SKIP_WHITESPACE (); |
| |
| if (*input_line_pointer != ',') |
| { |
| *end_name = 0; |
| as_bad (_("expected comma after name \"%s\""), name); |
| *end_name = delim; |
| ignore_rest_of_line (); |
| return; |
| } |
| |
| input_line_pointer++; |
| *end_name = 0; |
| |
| if (name[0] == '.' && name[1] == '\0') |
| { |
| /* XXX - this should not happen to .thumb_set. */ |
| abort (); |
| } |
| |
| if ((symbolP = symbol_find (name)) == NULL |
| && (symbolP = md_undefined_symbol (name)) == NULL) |
| { |
| #ifndef NO_LISTING |
| /* When doing symbol listings, play games with dummy fragments living |
| outside the normal fragment chain to record the file and line info |
| for this symbol. */ |
| if (listing & LISTING_SYMBOLS) |
| { |
| extern struct list_info_struct * listing_tail; |
| fragS * dummy_frag = (fragS *) xmalloc (sizeof (fragS)); |
| |
| memset (dummy_frag, 0, sizeof (fragS)); |
| dummy_frag->fr_type = rs_fill; |
| dummy_frag->line = listing_tail; |
| symbolP = symbol_new (name, undefined_section, 0, dummy_frag); |
| dummy_frag->fr_symbol = symbolP; |
| } |
| else |
| #endif |
| symbolP = symbol_new (name, undefined_section, 0, &zero_address_frag); |
| |
| #ifdef OBJ_COFF |
| /* "set" symbols are local unless otherwise specified. */ |
| SF_SET_LOCAL (symbolP); |
| #endif /* OBJ_COFF */ |
| } /* Make a new symbol. */ |
| |
| symbol_table_insert (symbolP); |
| |
| * end_name = delim; |
| |
| if (equiv |
| && S_IS_DEFINED (symbolP) |
| && S_GET_SEGMENT (symbolP) != reg_section) |
| as_bad (_("symbol `%s' already defined"), S_GET_NAME (symbolP)); |
| |
| pseudo_set (symbolP); |
| |
| demand_empty_rest_of_line (); |
| |
| /* XXX Now we come to the Thumb specific bit of code. */ |
| |
| THUMB_SET_FUNC (symbolP, 1); |
| ARM_SET_THUMB (symbolP, 1); |
| #if defined OBJ_ELF || defined OBJ_COFF |
| ARM_SET_INTERWORK (symbolP, support_interwork); |
| #endif |
| } |
| |
| static void |
| opcode_select (width) |
| int width; |
| { |
| switch (width) |
| { |
| case 16: |
| if (! thumb_mode) |
| { |
| if (! (cpu_variant & ARM_EXT_V4T)) |
| as_bad (_("selected processor does not support THUMB opcodes")); |
| |
| thumb_mode = 1; |
| /* No need to force the alignment, since we will have been |
| coming from ARM mode, which is word-aligned. */ |
| record_alignment (now_seg, 1); |
| } |
| break; |
| |
| case 32: |
| if (thumb_mode) |
| { |
| if ((cpu_variant & ARM_ALL) == ARM_EXT_V4T) |
| as_bad (_("selected processor does not support ARM opcodes")); |
| |
| thumb_mode = 0; |
| |
| if (!need_pass_2) |
| frag_align (2, 0, 0); |
| |
| record_alignment (now_seg, 1); |
| } |
| break; |
| |
| default: |
| as_bad (_("invalid instruction size selected (%d)"), width); |
| } |
| } |
| |
| static void |
| s_arm (ignore) |
| int ignore ATTRIBUTE_UNUSED; |
| { |
| opcode_select (32); |
| demand_empty_rest_of_line (); |
| } |
| |
| static void |
| s_thumb (ignore) |
| int ignore ATTRIBUTE_UNUSED; |
| { |
| opcode_select (16); |
| demand_empty_rest_of_line (); |
| } |
| |
| static void |
| s_code (unused) |
| int unused ATTRIBUTE_UNUSED; |
| { |
| register int temp; |
| |
| temp = get_absolute_expression (); |
| switch (temp) |
| { |
| case 16: |
| case 32: |
| opcode_select (temp); |
| break; |
| |
| default: |
| as_bad (_("invalid operand to .code directive (%d) (expecting 16 or 32)"), temp); |
| } |
| } |
| |
| static void |
| end_of_line (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (*str != '\0' && !inst.error) |
| inst.error = _("garbage following instruction"); |
| } |
| |
| static int |
| skip_past_comma (str) |
| char ** str; |
| { |
| char * p = * str, c; |
| int comma = 0; |
| |
| while ((c = *p) == ' ' || c == ',') |
| { |
| p++; |
| if (c == ',' && comma++) |
| return FAIL; |
| } |
| |
| if (c == '\0') |
| return FAIL; |
| |
| *str = p; |
| return comma ? SUCCESS : FAIL; |
| } |
| |
| /* A standard register must be given at this point. |
| SHIFT is the place to put it in inst.instruction. |
| Restores input start point on error. |
| Returns the reg#, or FAIL. */ |
| |
| static int |
| reg_required_here (str, shift) |
| char ** str; |
| int shift; |
| { |
| static char buff [128]; /* XXX */ |
| int reg; |
| char * start = * str; |
| |
| if ((reg = arm_reg_parse (str, all_reg_maps[REG_TYPE_RN].htab)) != FAIL) |
| { |
| if (shift >= 0) |
| inst.instruction |= reg << shift; |
| return reg; |
| } |
| |
| /* Restore the start point, we may have got a reg of the wrong class. */ |
| *str = start; |
| |
| /* In the few cases where we might be able to accept something else |
| this error can be overridden. */ |
| sprintf (buff, _("register expected, not '%.100s'"), start); |
| inst.error = buff; |
| |
| return FAIL; |
| } |
| |
| static const struct asm_psr * |
| arm_psr_parse (ccp) |
| register char ** ccp; |
| { |
| char * start = * ccp; |
| char c; |
| char * p; |
| const struct asm_psr * psr; |
| |
| p = start; |
| |
| /* Skip to the end of the next word in the input stream. */ |
| do |
| { |
| c = *p++; |
| } |
| while (ISALPHA (c) || c == '_'); |
| |
| /* Terminate the word. */ |
| *--p = 0; |
| |
| /* CPSR's and SPSR's can now be lowercase. This is just a convenience |
| feature for ease of use and backwards compatibility. */ |
| if (!strncmp (start, "cpsr", 4)) |
| strncpy (start, "CPSR", 4); |
| else if (!strncmp (start, "spsr", 4)) |
| strncpy (start, "SPSR", 4); |
| |
| /* Now locate the word in the psr hash table. */ |
| psr = (const struct asm_psr *) hash_find (arm_psr_hsh, start); |
| |
| /* Restore the input stream. */ |
| *p = c; |
| |
| /* If we found a valid match, advance the |
| stream pointer past the end of the word. */ |
| *ccp = p; |
| |
| return psr; |
| } |
| |
| /* Parse the input looking for a PSR flag. */ |
| |
| static int |
| psr_required_here (str) |
| char ** str; |
| { |
| char * start = * str; |
| const struct asm_psr * psr; |
| |
| psr = arm_psr_parse (str); |
| |
| if (psr) |
| { |
| /* If this is the SPSR that is being modified, set the R bit. */ |
| if (! psr->cpsr) |
| inst.instruction |= SPSR_BIT; |
| |
| /* Set the psr flags in the MSR instruction. */ |
| inst.instruction |= psr->field << PSR_SHIFT; |
| |
| return SUCCESS; |
| } |
| |
| /* In the few cases where we might be able to accept |
| something else this error can be overridden. */ |
| inst.error = _("flag for {c}psr instruction expected"); |
| |
| /* Restore the start point. */ |
| *str = start; |
| return FAIL; |
| } |
| |
| static int |
| co_proc_number (str) |
| char **str; |
| { |
| int processor, pchar; |
| char *start; |
| |
| skip_whitespace (*str); |
| start = *str; |
| |
| /* The data sheet seems to imply that just a number on its own is valid |
| here, but the RISC iX assembler seems to accept a prefix 'p'. We will |
| accept either. */ |
| if ((processor = arm_reg_parse (str, all_reg_maps[REG_TYPE_CP].htab)) |
| == FAIL) |
| { |
| *str = start; |
| |
| pchar = *(*str)++; |
| if (pchar >= '0' && pchar <= '9') |
| { |
| processor = pchar - '0'; |
| if (**str >= '0' && **str <= '9') |
| { |
| processor = processor * 10 + *(*str)++ - '0'; |
| if (processor > 15) |
| { |
| inst.error = _("illegal co-processor number"); |
| return FAIL; |
| } |
| } |
| } |
| else |
| { |
| inst.error = _("bad or missing co-processor number"); |
| return FAIL; |
| } |
| } |
| |
| inst.instruction |= processor << 8; |
| return SUCCESS; |
| } |
| |
| static int |
| cp_opc_expr (str, where, length) |
| char ** str; |
| int where; |
| int length; |
| { |
| expressionS expr; |
| |
| skip_whitespace (* str); |
| |
| memset (&expr, '\0', sizeof (expr)); |
| |
| if (my_get_expression (&expr, str)) |
| return FAIL; |
| if (expr.X_op != O_constant) |
| { |
| inst.error = _("bad or missing expression"); |
| return FAIL; |
| } |
| |
| if ((expr.X_add_number & ((1 << length) - 1)) != expr.X_add_number) |
| { |
| inst.error = _("immediate co-processor expression too large"); |
| return FAIL; |
| } |
| |
| inst.instruction |= expr.X_add_number << where; |
| return SUCCESS; |
| } |
| |
| static int |
| cp_reg_required_here (str, where) |
| char ** str; |
| int where; |
| { |
| int reg; |
| char * start = *str; |
| |
| if ((reg = arm_reg_parse (str, all_reg_maps[REG_TYPE_CN].htab)) != FAIL) |
| { |
| inst.instruction |= reg << where; |
| return reg; |
| } |
| |
| /* In the few cases where we might be able to accept something else |
| this error can be overridden. */ |
| inst.error = _("co-processor register expected"); |
| |
| /* Restore the start point. */ |
| *str = start; |
| return FAIL; |
| } |
| |
| static int |
| fp_reg_required_here (str, where) |
| char ** str; |
| int where; |
| { |
| int reg; |
| char * start = * str; |
| |
| if ((reg = arm_reg_parse (str, all_reg_maps[REG_TYPE_FN].htab)) != FAIL) |
| { |
| inst.instruction |= reg << where; |
| return reg; |
| } |
| |
| /* In the few cases where we might be able to accept something else |
| this error can be overridden. */ |
| inst.error = _("floating point register expected"); |
| |
| /* Restore the start point. */ |
| *str = start; |
| return FAIL; |
| } |
| |
| static int |
| cp_address_offset (str) |
| char ** str; |
| { |
| int offset; |
| |
| skip_whitespace (* str); |
| |
| if (! is_immediate_prefix (**str)) |
| { |
| inst.error = _("immediate expression expected"); |
| return FAIL; |
| } |
| |
| (*str)++; |
| |
| if (my_get_expression (& inst.reloc.exp, str)) |
| return FAIL; |
| |
| if (inst.reloc.exp.X_op == O_constant) |
| { |
| offset = inst.reloc.exp.X_add_number; |
| |
| if (offset & 3) |
| { |
| inst.error = _("co-processor address must be word aligned"); |
| return FAIL; |
| } |
| |
| if (offset > 1023 || offset < -1023) |
| { |
| inst.error = _("offset too large"); |
| return FAIL; |
| } |
| |
| if (offset >= 0) |
| inst.instruction |= INDEX_UP; |
| else |
| offset = -offset; |
| |
| inst.instruction |= offset >> 2; |
| } |
| else |
| inst.reloc.type = BFD_RELOC_ARM_CP_OFF_IMM; |
| |
| return SUCCESS; |
| } |
| |
| static int |
| cp_address_required_here (str, wb_ok) |
| char ** str; |
| int wb_ok; |
| { |
| char * p = * str; |
| int pre_inc = 0; |
| int write_back = 0; |
| |
| if (*p == '[') |
| { |
| int reg; |
| |
| p++; |
| skip_whitespace (p); |
| |
| if ((reg = reg_required_here (& p, 16)) == FAIL) |
| return FAIL; |
| |
| skip_whitespace (p); |
| |
| if (*p == ']') |
| { |
| p++; |
| |
| if (wb_ok && skip_past_comma (& p) == SUCCESS) |
| { |
| /* [Rn], #expr */ |
| write_back = WRITE_BACK; |
| |
| if (reg == REG_PC) |
| { |
| inst.error = _("pc may not be used in post-increment"); |
| return FAIL; |
| } |
| |
| if (cp_address_offset (& p) == FAIL) |
| return FAIL; |
| } |
| else |
| pre_inc = PRE_INDEX | INDEX_UP; |
| } |
| else |
| { |
| /* '['Rn, #expr']'[!] */ |
| |
| if (skip_past_comma (& p) == FAIL) |
| { |
| inst.error = _("pre-indexed expression expected"); |
| return FAIL; |
| } |
| |
| pre_inc = PRE_INDEX; |
| |
| if (cp_address_offset (& p) == FAIL) |
| return FAIL; |
| |
| skip_whitespace (p); |
| |
| if (*p++ != ']') |
| { |
| inst.error = _("missing ]"); |
| return FAIL; |
| } |
| |
| skip_whitespace (p); |
| |
| if (wb_ok && *p == '!') |
| { |
| if (reg == REG_PC) |
| { |
| inst.error = _("pc may not be used with write-back"); |
| return FAIL; |
| } |
| |
| p++; |
| write_back = WRITE_BACK; |
| } |
| } |
| } |
| else |
| { |
| if (my_get_expression (&inst.reloc.exp, &p)) |
| return FAIL; |
| |
| inst.reloc.type = BFD_RELOC_ARM_CP_OFF_IMM; |
| inst.reloc.exp.X_add_number -= 8; /* PC rel adjust. */ |
| inst.reloc.pc_rel = 1; |
| inst.instruction |= (REG_PC << 16); |
| pre_inc = PRE_INDEX; |
| } |
| |
| inst.instruction |= write_back | pre_inc; |
| *str = p; |
| return SUCCESS; |
| } |
| |
| static void |
| do_empty (str) |
| char * str; |
| { |
| /* Do nothing really. */ |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_mrs (str) |
| char *str; |
| { |
| int skip = 0; |
| |
| /* Only one syntax. */ |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL) |
| { |
| inst.error = _("comma expected after register name"); |
| return; |
| } |
| |
| skip_whitespace (str); |
| |
| if ( strcmp (str, "CPSR") == 0 |
| || strcmp (str, "SPSR") == 0 |
| /* Lower case versions for backwards compatability. */ |
| || strcmp (str, "cpsr") == 0 |
| || strcmp (str, "spsr") == 0) |
| skip = 4; |
| |
| /* This is for backwards compatability with older toolchains. */ |
| else if ( strcmp (str, "cpsr_all") == 0 |
| || strcmp (str, "spsr_all") == 0) |
| skip = 8; |
| else |
| { |
| inst.error = _("CPSR or SPSR expected"); |
| return; |
| } |
| |
| if (* str == 's' || * str == 'S') |
| inst.instruction |= SPSR_BIT; |
| str += skip; |
| |
| end_of_line (str); |
| } |
| |
| /* Two possible forms: |
| "{C|S}PSR_<field>, Rm", |
| "{C|S}PSR_f, #expression". */ |
| |
| static void |
| do_msr (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (psr_required_here (& str) == FAIL) |
| return; |
| |
| if (skip_past_comma (& str) == FAIL) |
| { |
| inst.error = _("comma missing after psr flags"); |
| return; |
| } |
| |
| skip_whitespace (str); |
| |
| if (reg_required_here (& str, 0) != FAIL) |
| { |
| inst.error = NULL; |
| end_of_line (str); |
| return; |
| } |
| |
| if (! is_immediate_prefix (* str)) |
| { |
| inst.error = |
| _("only a register or immediate value can follow a psr flag"); |
| return; |
| } |
| |
| str ++; |
| inst.error = NULL; |
| |
| if (my_get_expression (& inst.reloc.exp, & str)) |
| { |
| inst.error = |
| _("only a register or immediate value can follow a psr flag"); |
| return; |
| } |
| |
| #if 0 /* The first edition of the ARM architecture manual stated that |
| writing anything other than the flags with an immediate operation |
| had UNPREDICTABLE effects. This constraint was removed in the |
| second edition of the specification. */ |
| if ((cpu_variant & ARM_EXT_V5) != ARM_EXT_V5 |
| && inst.instruction & ((PSR_c | PSR_x | PSR_s) << PSR_SHIFT)) |
| { |
| inst.error = _("immediate value cannot be used to set this field"); |
| return; |
| } |
| #endif |
| |
| inst.instruction |= INST_IMMEDIATE; |
| |
| if (inst.reloc.exp.X_add_symbol) |
| { |
| inst.reloc.type = BFD_RELOC_ARM_IMMEDIATE; |
| inst.reloc.pc_rel = 0; |
| } |
| else |
| { |
| unsigned value = validate_immediate (inst.reloc.exp.X_add_number); |
| |
| if (value == (unsigned) FAIL) |
| { |
| inst.error = _("invalid constant"); |
| return; |
| } |
| |
| inst.instruction |= value; |
| } |
| |
| inst.error = NULL; |
| end_of_line (str); |
| } |
| |
| /* Long Multiply Parser |
| UMULL RdLo, RdHi, Rm, Rs |
| SMULL RdLo, RdHi, Rm, Rs |
| UMLAL RdLo, RdHi, Rm, Rs |
| SMLAL RdLo, RdHi, Rm, Rs. */ |
| |
| static void |
| do_mull (str) |
| char * str; |
| { |
| int rdlo, rdhi, rm, rs; |
| |
| /* Only one format "rdlo, rdhi, rm, rs". */ |
| skip_whitespace (str); |
| |
| if ((rdlo = reg_required_here (&str, 12)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || (rdhi = reg_required_here (&str, 16)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || (rm = reg_required_here (&str, 0)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| /* rdhi, rdlo and rm must all be different. */ |
| if (rdlo == rdhi || rdlo == rm || rdhi == rm) |
| as_tsktsk (_("rdhi, rdlo and rm must all be different")); |
| |
| if (skip_past_comma (&str) == FAIL |
| || (rs = reg_required_here (&str, 8)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (rdhi == REG_PC || rdhi == REG_PC || rdhi == REG_PC || rdhi == REG_PC) |
| { |
| inst.error = BAD_PC; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_mul (str) |
| char * str; |
| { |
| int rd, rm; |
| |
| /* Only one format "rd, rm, rs". */ |
| skip_whitespace (str); |
| |
| if ((rd = reg_required_here (&str, 16)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (rd == REG_PC) |
| { |
| inst.error = BAD_PC; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || (rm = reg_required_here (&str, 0)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (rm == REG_PC) |
| { |
| inst.error = BAD_PC; |
| return; |
| } |
| |
| if (rm == rd) |
| as_tsktsk (_("rd and rm should be different in mul")); |
| |
| if (skip_past_comma (&str) == FAIL |
| || (rm = reg_required_here (&str, 8)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (rm == REG_PC) |
| { |
| inst.error = BAD_PC; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_mla (str) |
| char * str; |
| { |
| int rd, rm; |
| |
| /* Only one format "rd, rm, rs, rn". */ |
| skip_whitespace (str); |
| |
| if ((rd = reg_required_here (&str, 16)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (rd == REG_PC) |
| { |
| inst.error = BAD_PC; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || (rm = reg_required_here (&str, 0)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (rm == REG_PC) |
| { |
| inst.error = BAD_PC; |
| return; |
| } |
| |
| if (rm == rd) |
| as_tsktsk (_("rd and rm should be different in mla")); |
| |
| if (skip_past_comma (&str) == FAIL |
| || (rd = reg_required_here (&str, 8)) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || (rm = reg_required_here (&str, 12)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (rd == REG_PC || rm == REG_PC) |
| { |
| inst.error = BAD_PC; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| /* Expects *str -> the characters "acc0", possibly with leading blanks. |
| Advances *str to the next non-alphanumeric. |
| Returns 0, or else FAIL (in which case sets inst.error). |
| |
| (In a future XScale, there may be accumulators other than zero. |
| At that time this routine and its callers can be upgraded to suit.) */ |
| |
| static int |
| accum0_required_here (str) |
| char ** str; |
| { |
| static char buff [128]; /* Note the address is taken. Hence, static. */ |
| char * p = * str; |
| char c; |
| int result = 0; /* The accum number. */ |
| |
| skip_whitespace (p); |
| |
| *str = p; /* Advance caller's string pointer too. */ |
| c = *p++; |
| while (ISALNUM (c)) |
| c = *p++; |
| |
| *--p = 0; /* Aap nul into input buffer at non-alnum. */ |
| |
| if (! ( streq (*str, "acc0") || streq (*str, "ACC0"))) |
| { |
| sprintf (buff, _("acc0 expected, not '%.100s'"), *str); |
| inst.error = buff; |
| result = FAIL; |
| } |
| |
| *p = c; /* Unzap. */ |
| *str = p; /* Caller's string pointer to after match. */ |
| return result; |
| } |
| |
| /* Expects **str -> after a comma. May be leading blanks. |
| Advances *str, recognizing a load mode, and setting inst.instruction. |
| Returns rn, or else FAIL (in which case may set inst.error |
| and not advance str) |
| |
| Note: doesn't know Rd, so no err checks that require such knowledge. */ |
| |
| static int |
| ld_mode_required_here (string) |
| char ** string; |
| { |
| char * str = * string; |
| int rn; |
| int pre_inc = 0; |
| |
| skip_whitespace (str); |
| |
| if (* str == '[') |
| { |
| str++; |
| |
| skip_whitespace (str); |
| |
| if ((rn = reg_required_here (& str, 16)) == FAIL) |
| return FAIL; |
| |
| skip_whitespace (str); |
| |
| if (* str == ']') |
| { |
| str ++; |
| |
| if (skip_past_comma (& str) == SUCCESS) |
| { |
| /* [Rn],... (post inc) */ |
| if (ldst_extend_v4 (&str) == FAIL) |
| return FAIL; |
| } |
| else /* [Rn] */ |
| { |
| skip_whitespace (str); |
| |
| if (* str == '!') |
| { |
| str ++; |
| inst.instruction |= WRITE_BACK; |
| } |
| |
| inst.instruction |= INDEX_UP | HWOFFSET_IMM; |
| pre_inc = 1; |
| } |
| } |
| else /* [Rn,...] */ |
| { |
| if (skip_past_comma (& str) == FAIL) |
| { |
| inst.error = _("pre-indexed expression expected"); |
| return FAIL; |
| } |
| |
| pre_inc = 1; |
| |
| if (ldst_extend_v4 (&str) == FAIL) |
| return FAIL; |
| |
| skip_whitespace (str); |
| |
| if (* str ++ != ']') |
| { |
| inst.error = _("missing ]"); |
| return FAIL; |
| } |
| |
| skip_whitespace (str); |
| |
| if (* str == '!') |
| { |
| str ++; |
| inst.instruction |= WRITE_BACK; |
| } |
| } |
| } |
| else if (* str == '=') /* ldr's "r,=label" syntax */ |
| /* We should never reach here, because <text> = <expression> is |
| caught gas/read.c read_a_source_file() as a .set operation. */ |
| return FAIL; |
| else /* PC +- 8 bit immediate offset. */ |
| { |
| if (my_get_expression (& inst.reloc.exp, & str)) |
| return FAIL; |
| |
| inst.instruction |= HWOFFSET_IMM; /* The I bit. */ |
| inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM8; |
| inst.reloc.exp.X_add_number -= 8; /* PC rel adjust. */ |
| inst.reloc.pc_rel = 1; |
| inst.instruction |= (REG_PC << 16); |
| |
| rn = REG_PC; |
| pre_inc = 1; |
| } |
| |
| inst.instruction |= (pre_inc ? PRE_INDEX : 0); |
| * string = str; |
| |
| return rn; |
| } |
| |
| /* ARM V5E (El Segundo) signed-multiply-accumulate (argument parse) |
| SMLAxy{cond} Rd,Rm,Rs,Rn |
| SMLAWy{cond} Rd,Rm,Rs,Rn |
| Error if any register is R15. */ |
| |
| static void |
| do_smla (str) |
| char * str; |
| { |
| int rd, rm, rs, rn; |
| |
| skip_whitespace (str); |
| |
| if ((rd = reg_required_here (& str, 16)) == FAIL |
| || skip_past_comma (& str) == FAIL |
| || (rm = reg_required_here (& str, 0)) == FAIL |
| || skip_past_comma (& str) == FAIL |
| || (rs = reg_required_here (& str, 8)) == FAIL |
| || skip_past_comma (& str) == FAIL |
| || (rn = reg_required_here (& str, 12)) == FAIL) |
| inst.error = BAD_ARGS; |
| |
| else if (rd == REG_PC || rm == REG_PC || rs == REG_PC || rn == REG_PC) |
| inst.error = BAD_PC; |
| |
| else |
| end_of_line (str); |
| } |
| |
| /* ARM V5E (El Segundo) signed-multiply-accumulate-long (argument parse) |
| SMLALxy{cond} Rdlo,Rdhi,Rm,Rs |
| Error if any register is R15. |
| Warning if Rdlo == Rdhi. */ |
| |
| static void |
| do_smlal (str) |
| char * str; |
| { |
| int rdlo, rdhi, rm, rs; |
| |
| skip_whitespace (str); |
| |
| if ((rdlo = reg_required_here (& str, 12)) == FAIL |
| || skip_past_comma (& str) == FAIL |
| || (rdhi = reg_required_here (& str, 16)) == FAIL |
| || skip_past_comma (& str) == FAIL |
| || (rm = reg_required_here (& str, 0)) == FAIL |
| || skip_past_comma (& str) == FAIL |
| || (rs = reg_required_here (& str, 8)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (rdlo == REG_PC || rdhi == REG_PC || rm == REG_PC || rs == REG_PC) |
| { |
| inst.error = BAD_PC; |
| return; |
| } |
| |
| if (rdlo == rdhi) |
| as_tsktsk (_("rdhi and rdlo must be different")); |
| |
| end_of_line (str); |
| } |
| |
| /* ARM V5E (El Segundo) signed-multiply (argument parse) |
| SMULxy{cond} Rd,Rm,Rs |
| Error if any register is R15. */ |
| |
| static void |
| do_smul (str) |
| char * str; |
| { |
| int rd, rm, rs; |
| |
| skip_whitespace (str); |
| |
| if ((rd = reg_required_here (& str, 16)) == FAIL |
| || skip_past_comma (& str) == FAIL |
| || (rm = reg_required_here (& str, 0)) == FAIL |
| || skip_past_comma (& str) == FAIL |
| || (rs = reg_required_here (& str, 8)) == FAIL) |
| inst.error = BAD_ARGS; |
| |
| else if (rd == REG_PC || rm == REG_PC || rs == REG_PC) |
| inst.error = BAD_PC; |
| |
| else |
| end_of_line (str); |
| } |
| |
| /* ARM V5E (El Segundo) saturating-add/subtract (argument parse) |
| Q[D]{ADD,SUB}{cond} Rd,Rm,Rn |
| Error if any register is R15. */ |
| |
| static void |
| do_qadd (str) |
| char * str; |
| { |
| int rd, rm, rn; |
| |
| skip_whitespace (str); |
| |
| if ((rd = reg_required_here (& str, 12)) == FAIL |
| || skip_past_comma (& str) == FAIL |
| || (rm = reg_required_here (& str, 0)) == FAIL |
| || skip_past_comma (& str) == FAIL |
| || (rn = reg_required_here (& str, 16)) == FAIL) |
| inst.error = BAD_ARGS; |
| |
| else if (rd == REG_PC || rm == REG_PC || rn == REG_PC) |
| inst.error = BAD_PC; |
| |
| else |
| end_of_line (str); |
| } |
| |
| /* ARM V5E (el Segundo) |
| MCRRcc <coproc>, <opcode>, <Rd>, <Rn>, <CRm>. |
| MRRCcc <coproc>, <opcode>, <Rd>, <Rn>, <CRm>. |
| |
| These are equivalent to the XScale instructions MAR and MRA, |
| respectively, when coproc == 0, opcode == 0, and CRm == 0. |
| |
| Result unpredicatable if Rd or Rn is R15. */ |
| |
| static void |
| do_co_reg2c (str) |
| char * str; |
| { |
| int rd, rn; |
| |
| skip_whitespace (str); |
| |
| if (co_proc_number (& str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || cp_opc_expr (& str, 4, 4) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || (rd = reg_required_here (& str, 12)) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || (rn = reg_required_here (& str, 16)) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| /* Unpredictable result if rd or rn is R15. */ |
| if (rd == REG_PC || rn == REG_PC) |
| as_tsktsk |
| (_("Warning: instruction unpredictable when using r15")); |
| |
| if (skip_past_comma (& str) == FAIL |
| || cp_reg_required_here (& str, 0) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| } |
| |
| /* ARM V5 count-leading-zeroes instruction (argument parse) |
| CLZ{<cond>} <Rd>, <Rm> |
| Condition defaults to COND_ALWAYS. |
| Error if Rd or Rm are R15. */ |
| |
| static void |
| do_clz (str) |
| char * str; |
| { |
| int rd, rm; |
| |
| skip_whitespace (str); |
| |
| if (((rd = reg_required_here (& str, 12)) == FAIL) |
| || (skip_past_comma (& str) == FAIL) |
| || ((rm = reg_required_here (& str, 0)) == FAIL)) |
| inst.error = BAD_ARGS; |
| |
| else if (rd == REG_PC || rm == REG_PC ) |
| inst.error = BAD_PC; |
| |
| else |
| end_of_line (str); |
| } |
| |
| /* ARM V5 (argument parse) |
| LDC2{L} <coproc>, <CRd>, <addressing mode> |
| STC2{L} <coproc>, <CRd>, <addressing mode> |
| Instruction is not conditional, and has 0xf in the codition field. |
| Otherwise, it's the same as LDC/STC. */ |
| |
| static void |
| do_lstc2 (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (co_proc_number (& str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| } |
| else if (skip_past_comma (& str) == FAIL |
| || cp_reg_required_here (& str, 12) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| } |
| else if (skip_past_comma (& str) == FAIL |
| || cp_address_required_here (&str, CP_WB_OK) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| } |
| else |
| end_of_line (str); |
| } |
| |
| /* ARM V5 (argument parse) |
| CDP2 <coproc>, <opcode_1>, <CRd>, <CRn>, <CRm>, <opcode_2> |
| Instruction is not conditional, and has 0xf in the condition field. |
| Otherwise, it's the same as CDP. */ |
| |
| static void |
| do_cdp2 (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (co_proc_number (& str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || cp_opc_expr (& str, 20,4) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || cp_reg_required_here (& str, 12) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || cp_reg_required_here (& str, 16) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || cp_reg_required_here (& str, 0) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == SUCCESS) |
| { |
| if (cp_opc_expr (& str, 5, 3) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| } |
| |
| end_of_line (str); |
| } |
| |
| /* ARM V5 (argument parse) |
| MCR2 <coproc>, <opcode_1>, <Rd>, <CRn>, <CRm>, <opcode_2> |
| MRC2 <coproc>, <opcode_1>, <Rd>, <CRn>, <CRm>, <opcode_2> |
| Instruction is not conditional, and has 0xf in the condition field. |
| Otherwise, it's the same as MCR/MRC. */ |
| |
| static void |
| do_co_reg2 (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (co_proc_number (& str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || cp_opc_expr (& str, 21, 3) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || reg_required_here (& str, 12) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || cp_reg_required_here (& str, 16) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || cp_reg_required_here (& str, 0) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == SUCCESS) |
| { |
| if (cp_opc_expr (& str, 5, 3) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| } |
| |
| end_of_line (str); |
| } |
| |
| /* ARM v5TEJ. Jump to Jazelle code. */ |
| static void |
| do_bxj (str) |
| char * str; |
| { |
| int reg; |
| |
| skip_whitespace (str); |
| |
| if ((reg = reg_required_here (&str, 0)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| /* Note - it is not illegal to do a "bxj pc". Useless, but not illegal. */ |
| if (reg == REG_PC) |
| as_tsktsk (_("use of r15 in bxj is not really useful")); |
| |
| end_of_line (str); |
| } |
| |
| /* THUMB V5 breakpoint instruction (argument parse) |
| BKPT <immed_8>. */ |
| |
| static void |
| do_t_bkpt (str) |
| char * str; |
| { |
| expressionS expr; |
| unsigned long number; |
| |
| skip_whitespace (str); |
| |
| /* Allow optional leading '#'. */ |
| if (is_immediate_prefix (*str)) |
| str ++; |
| |
| memset (& expr, '\0', sizeof (expr)); |
| if (my_get_expression (& expr, & str) |
| || (expr.X_op != O_constant |
| /* As a convenience we allow 'bkpt' without an operand. */ |
| && expr.X_op != O_absent)) |
| { |
| inst.error = _("bad expression"); |
| return; |
| } |
| |
| number = expr.X_add_number; |
| |
| /* Check it fits an 8 bit unsigned. */ |
| if (number != (number & 0xff)) |
| { |
| inst.error = _("immediate value out of range"); |
| return; |
| } |
| |
| inst.instruction |= number; |
| |
| end_of_line (str); |
| } |
| |
| /* ARM V5 branch-link-exchange (argument parse) for BLX(1) only. |
| Expects inst.instruction is set for BLX(1). |
| Note: this is cloned from do_branch, and the reloc changed to be a |
| new one that can cope with setting one extra bit (the H bit). */ |
| |
| static void |
| do_branch25 (str) |
| char * str; |
| { |
| if (my_get_expression (& inst.reloc.exp, & str)) |
| return; |
| |
| #ifdef OBJ_ELF |
| { |
| char * save_in; |
| |
| /* ScottB: February 5, 1998 */ |
| /* Check to see of PLT32 reloc required for the instruction. */ |
| |
| /* arm_parse_reloc() works on input_line_pointer. |
| We actually want to parse the operands to the branch instruction |
| passed in 'str'. Save the input pointer and restore it later. */ |
| save_in = input_line_pointer; |
| input_line_pointer = str; |
| |
| if (inst.reloc.exp.X_op == O_symbol |
| && *str == '(' |
| && arm_parse_reloc () == BFD_RELOC_ARM_PLT32) |
| { |
| inst.reloc.type = BFD_RELOC_ARM_PLT32; |
| inst.reloc.pc_rel = 0; |
| /* Modify str to point to after parsed operands, otherwise |
| end_of_line() will complain about the (PLT) left in str. */ |
| str = input_line_pointer; |
| } |
| else |
| { |
| inst.reloc.type = BFD_RELOC_ARM_PCREL_BLX; |
| inst.reloc.pc_rel = 1; |
| } |
| |
| input_line_pointer = save_in; |
| } |
| #else |
| inst.reloc.type = BFD_RELOC_ARM_PCREL_BLX; |
| inst.reloc.pc_rel = 1; |
| #endif /* OBJ_ELF */ |
| |
| end_of_line (str); |
| } |
| |
| /* ARM V5 branch-link-exchange instruction (argument parse) |
| BLX <target_addr> ie BLX(1) |
| BLX{<condition>} <Rm> ie BLX(2) |
| Unfortunately, there are two different opcodes for this mnemonic. |
| So, the insns[].value is not used, and the code here zaps values |
| into inst.instruction. |
| Also, the <target_addr> can be 25 bits, hence has its own reloc. */ |
| |
| static void |
| do_blx (str) |
| char * str; |
| { |
| char * mystr = str; |
| int rm; |
| |
| skip_whitespace (mystr); |
| rm = reg_required_here (& mystr, 0); |
| |
| /* The above may set inst.error. Ignore his opinion. */ |
| inst.error = 0; |
| |
| if (rm != FAIL) |
| { |
| /* Arg is a register. |
| Use the condition code our caller put in inst.instruction. |
| Pass ourselves off as a BX with a funny opcode. */ |
| inst.instruction |= 0x012fff30; |
| do_bx (str); |
| } |
| else |
| { |
| /* This must be is BLX <target address>, no condition allowed. */ |
| if (inst.instruction != COND_ALWAYS) |
| { |
| inst.error = BAD_COND; |
| return; |
| } |
| |
| inst.instruction = 0xfafffffe; |
| |
| /* Process like a B/BL, but with a different reloc. |
| Note that B/BL expecte fffffe, not 0, offset in the opcode table. */ |
| do_branch25 (str); |
| } |
| } |
| |
| /* ARM V5 Thumb BLX (argument parse) |
| BLX <target_addr> which is BLX(1) |
| BLX <Rm> which is BLX(2) |
| Unfortunately, there are two different opcodes for this mnemonic. |
| So, the tinsns[].value is not used, and the code here zaps values |
| into inst.instruction. */ |
| |
| static void |
| do_t_blx (str) |
| char * str; |
| { |
| char * mystr = str; |
| int rm; |
| |
| skip_whitespace (mystr); |
| inst.instruction = 0x4780; |
| |
| /* Note that this call is to the ARM register recognizer. BLX(2) |
| uses the ARM register space, not the Thumb one, so a call to |
| thumb_reg() would be wrong. */ |
| rm = reg_required_here (& mystr, 3); |
| inst.error = 0; |
| |
| if (rm != FAIL) |
| { |
| /* It's BLX(2). The .instruction was zapped with rm & is final. */ |
| inst.size = 2; |
| } |
| else |
| { |
| /* No ARM register. This must be BLX(1). Change the .instruction. */ |
| inst.instruction = 0xf7ffeffe; |
| inst.size = 4; |
| |
| if (my_get_expression (& inst.reloc.exp, & mystr)) |
| return; |
| |
| inst.reloc.type = BFD_RELOC_THUMB_PCREL_BLX; |
| inst.reloc.pc_rel = 1; |
| } |
| |
| end_of_line (mystr); |
| } |
| |
| /* ARM V5 breakpoint instruction (argument parse) |
| BKPT <16 bit unsigned immediate> |
| Instruction is not conditional. |
| The bit pattern given in insns[] has the COND_ALWAYS condition, |
| and it is an error if the caller tried to override that. */ |
| |
| static void |
| do_bkpt (str) |
| char * str; |
| { |
| expressionS expr; |
| unsigned long number; |
| |
| skip_whitespace (str); |
| |
| /* Allow optional leading '#'. */ |
| if (is_immediate_prefix (* str)) |
| str++; |
| |
| memset (& expr, '\0', sizeof (expr)); |
| |
| if (my_get_expression (& expr, & str) |
| || (expr.X_op != O_constant |
| /* As a convenience we allow 'bkpt' without an operand. */ |
| && expr.X_op != O_absent)) |
| { |
| inst.error = _("bad expression"); |
| return; |
| } |
| |
| number = expr.X_add_number; |
| |
| /* Check it fits a 16 bit unsigned. */ |
| if (number != (number & 0xffff)) |
| { |
| inst.error = _("immediate value out of range"); |
| return; |
| } |
| |
| /* Top 12 of 16 bits to bits 19:8. */ |
| inst.instruction |= (number & 0xfff0) << 4; |
| |
| /* Bottom 4 of 16 bits to bits 3:0. */ |
| inst.instruction |= number & 0xf; |
| |
| end_of_line (str); |
| } |
| |
| /* Xscale multiply-accumulate (argument parse) |
| MIAcc acc0,Rm,Rs |
| MIAPHcc acc0,Rm,Rs |
| MIAxycc acc0,Rm,Rs. */ |
| |
| static void |
| do_xsc_mia (str) |
| char * str; |
| { |
| int rs; |
| int rm; |
| |
| if (accum0_required_here (& str) == FAIL) |
| inst.error = ERR_NO_ACCUM; |
| |
| else if (skip_past_comma (& str) == FAIL |
| || (rm = reg_required_here (& str, 0)) == FAIL) |
| inst.error = BAD_ARGS; |
| |
| else if (skip_past_comma (& str) == FAIL |
| || (rs = reg_required_here (& str, 12)) == FAIL) |
| inst.error = BAD_ARGS; |
| |
| /* inst.instruction has now been zapped with both rm and rs. */ |
| else if (rm == REG_PC || rs == REG_PC) |
| inst.error = BAD_PC; /* Undefined result if rm or rs is R15. */ |
| |
| else |
| end_of_line (str); |
| } |
| |
| /* Xscale move-accumulator-register (argument parse) |
| |
| MARcc acc0,RdLo,RdHi. */ |
| |
| static void |
| do_xsc_mar (str) |
| char * str; |
| { |
| int rdlo, rdhi; |
| |
| if (accum0_required_here (& str) == FAIL) |
| inst.error = ERR_NO_ACCUM; |
| |
| else if (skip_past_comma (& str) == FAIL |
| || (rdlo = reg_required_here (& str, 12)) == FAIL) |
| inst.error = BAD_ARGS; |
| |
| else if (skip_past_comma (& str) == FAIL |
| || (rdhi = reg_required_here (& str, 16)) == FAIL) |
| inst.error = BAD_ARGS; |
| |
| /* inst.instruction has now been zapped with both rdlo and rdhi. */ |
| else if (rdlo == REG_PC || rdhi == REG_PC) |
| inst.error = BAD_PC; /* Undefined result if rdlo or rdhi is R15. */ |
| |
| else |
| end_of_line (str); |
| } |
| |
| /* Xscale move-register-accumulator (argument parse) |
| |
| MRAcc RdLo,RdHi,acc0. */ |
| |
| static void |
| do_xsc_mra (str) |
| char * str; |
| { |
| int rdlo; |
| int rdhi; |
| |
| skip_whitespace (str); |
| |
| if ((rdlo = reg_required_here (& str, 12)) == FAIL) |
| inst.error = BAD_ARGS; |
| |
| else if (skip_past_comma (& str) == FAIL |
| || (rdhi = reg_required_here (& str, 16)) == FAIL) |
| inst.error = BAD_ARGS; |
| |
| else if (skip_past_comma (& str) == FAIL |
| || accum0_required_here (& str) == FAIL) |
| inst.error = ERR_NO_ACCUM; |
| |
| /* inst.instruction has now been zapped with both rdlo and rdhi. */ |
| else if (rdlo == rdhi) |
| inst.error = BAD_ARGS; /* Undefined result if 2 writes to same reg. */ |
| |
| else if (rdlo == REG_PC || rdhi == REG_PC) |
| inst.error = BAD_PC; /* Undefined result if rdlo or rdhi is R15. */ |
| else |
| end_of_line (str); |
| } |
| |
| /* ARMv5TE: Preload-Cache |
| |
| PLD <addr_mode> |
| |
| Syntactically, like LDR with B=1, W=0, L=1. */ |
| |
| static void |
| do_pld (str) |
| char * str; |
| { |
| int rd; |
| |
| skip_whitespace (str); |
| |
| if (* str != '[') |
| { |
| inst.error = _("'[' expected after PLD mnemonic"); |
| return; |
| } |
| |
| ++str; |
| skip_whitespace (str); |
| |
| if ((rd = reg_required_here (& str, 16)) == FAIL) |
| return; |
| |
| skip_whitespace (str); |
| |
| if (*str == ']') |
| { |
| /* [Rn], ... ? */ |
| ++str; |
| skip_whitespace (str); |
| |
| /* Post-indexed addressing is not allowed with PLD. */ |
| if (skip_past_comma (&str) == SUCCESS) |
| { |
| inst.error |
| = _("post-indexed expression used in preload instruction"); |
| return; |
| } |
| else if (*str == '!') /* [Rn]! */ |
| { |
| inst.error = _("writeback used in preload instruction"); |
| ++str; |
| } |
| else /* [Rn] */ |
| inst.instruction |= INDEX_UP | PRE_INDEX; |
| } |
| else /* [Rn, ...] */ |
| { |
| if (skip_past_comma (& str) == FAIL) |
| { |
| inst.error = _("pre-indexed expression expected"); |
| return; |
| } |
| |
| if (ldst_extend (&str) == FAIL) |
| return; |
| |
| skip_whitespace (str); |
| |
| if (* str != ']') |
| { |
| inst.error = _("missing ]"); |
| return; |
| } |
| |
| ++ str; |
| skip_whitespace (str); |
| |
| if (* str == '!') /* [Rn]! */ |
| { |
| inst.error = _("writeback used in preload instruction"); |
| ++ str; |
| } |
| |
| inst.instruction |= PRE_INDEX; |
| } |
| |
| end_of_line (str); |
| } |
| |
| /* ARMv5TE load-consecutive (argument parse) |
| Mode is like LDRH. |
| |
| LDRccD R, mode |
| STRccD R, mode. */ |
| |
| static void |
| do_ldrd (str) |
| char * str; |
| { |
| int rd; |
| int rn; |
| |
| skip_whitespace (str); |
| |
| if ((rd = reg_required_here (& str, 12)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL |
| || (rn = ld_mode_required_here (& str)) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| /* inst.instruction has now been zapped with Rd and the addressing mode. */ |
| if (rd & 1) /* Unpredictable result if Rd is odd. */ |
| { |
| inst.error = _("destination register must be even"); |
| return; |
| } |
| |
| if (rd == REG_LR) |
| { |
| inst.error = _("r14 not allowed here"); |
| return; |
| } |
| |
| if (((rd == rn) || (rd + 1 == rn)) |
| && ((inst.instruction & WRITE_BACK) |
| || (!(inst.instruction & PRE_INDEX)))) |
| as_warn (_("pre/post-indexing used when modified address register is destination")); |
| |
| /* For an index-register load, the index register must not overlap the |
| destination (even if not write-back). */ |
| if ((inst.instruction & V4_STR_BIT) == 0 |
| && (inst.instruction & HWOFFSET_IMM) == 0) |
| { |
| int rm = inst.instruction & 0x0000000f; |
| |
| if (rm == rd || (rm == rd + 1)) |
| as_warn (_("ldrd destination registers must not overlap index register")); |
| } |
| |
| end_of_line (str); |
| } |
| |
| /* Returns the index into fp_values of a floating point number, |
| or -1 if not in the table. */ |
| |
| static int |
| my_get_float_expression (str) |
| char ** str; |
| { |
| LITTLENUM_TYPE words[MAX_LITTLENUMS]; |
| char * save_in; |
| expressionS exp; |
| int i; |
| int j; |
| |
| memset (words, 0, MAX_LITTLENUMS * sizeof (LITTLENUM_TYPE)); |
| |
| /* Look for a raw floating point number. */ |
| if ((save_in = atof_ieee (*str, 'x', words)) != NULL |
| && is_end_of_line[(unsigned char) *save_in]) |
| { |
| for (i = 0; i < NUM_FLOAT_VALS; i++) |
| { |
| for (j = 0; j < MAX_LITTLENUMS; j++) |
| { |
| if (words[j] != fp_values[i][j]) |
| break; |
| } |
| |
| if (j == MAX_LITTLENUMS) |
| { |
| *str = save_in; |
| return i; |
| } |
| } |
| } |
| |
| /* Try and parse a more complex expression, this will probably fail |
| unless the code uses a floating point prefix (eg "0f"). */ |
| save_in = input_line_pointer; |
| input_line_pointer = *str; |
| if (expression (&exp) == absolute_section |
| && exp.X_op == O_big |
| && exp.X_add_number < 0) |
| { |
| /* FIXME: 5 = X_PRECISION, should be #define'd where we can use it. |
| Ditto for 15. */ |
| if (gen_to_words (words, 5, (long) 15) == 0) |
| { |
| for (i = 0; i < NUM_FLOAT_VALS; i++) |
| { |
| for (j = 0; j < MAX_LITTLENUMS; j++) |
| { |
| if (words[j] != fp_values[i][j]) |
| break; |
| } |
| |
| if (j == MAX_LITTLENUMS) |
| { |
| *str = input_line_pointer; |
| input_line_pointer = save_in; |
| return i; |
| } |
| } |
| } |
| } |
| |
| *str = input_line_pointer; |
| input_line_pointer = save_in; |
| return -1; |
| } |
| |
| /* Return TRUE if anything in the expression is a bignum. */ |
| |
| static int |
| walk_no_bignums (sp) |
| symbolS * sp; |
| { |
| if (symbol_get_value_expression (sp)->X_op == O_big) |
| return 1; |
| |
| if (symbol_get_value_expression (sp)->X_add_symbol) |
| { |
| return (walk_no_bignums (symbol_get_value_expression (sp)->X_add_symbol) |
| || (symbol_get_value_expression (sp)->X_op_symbol |
| && walk_no_bignums (symbol_get_value_expression (sp)->X_op_symbol))); |
| } |
| |
| return 0; |
| } |
| |
| static int in_my_get_expression = 0; |
| |
| static int |
| my_get_expression (ep, str) |
| expressionS * ep; |
| char ** str; |
| { |
| char * save_in; |
| segT seg; |
| |
| save_in = input_line_pointer; |
| input_line_pointer = *str; |
| in_my_get_expression = 1; |
| seg = expression (ep); |
| in_my_get_expression = 0; |
| |
| if (ep->X_op == O_illegal) |
| { |
| /* We found a bad expression in md_operand(). */ |
| *str = input_line_pointer; |
| input_line_pointer = save_in; |
| return 1; |
| } |
| |
| #ifdef OBJ_AOUT |
| if (seg != absolute_section |
| && seg != text_section |
| && seg != data_section |
| && seg != bss_section |
| && seg != undefined_section) |
| { |
| inst.error = _("bad_segment"); |
| *str = input_line_pointer; |
| input_line_pointer = save_in; |
| return 1; |
| } |
| #endif |
| |
| /* Get rid of any bignums now, so that we don't generate an error for which |
| we can't establish a line number later on. Big numbers are never valid |
| in instructions, which is where this routine is always called. */ |
| if (ep->X_op == O_big |
| || (ep->X_add_symbol |
| && (walk_no_bignums (ep->X_add_symbol) |
| || (ep->X_op_symbol |
| && walk_no_bignums (ep->X_op_symbol))))) |
| { |
| inst.error = _("invalid constant"); |
| *str = input_line_pointer; |
| input_line_pointer = save_in; |
| return 1; |
| } |
| |
| *str = input_line_pointer; |
| input_line_pointer = save_in; |
| return 0; |
| } |
| |
| /* We handle all bad expressions here, so that we can report the faulty |
| instruction in the error message. */ |
| void |
| md_operand (expr) |
| expressionS *expr; |
| { |
| if (in_my_get_expression) |
| { |
| expr->X_op = O_illegal; |
| if (inst.error == NULL) |
| inst.error = _("bad expression"); |
| } |
| } |
| |
| /* UNRESTRICT should be one if <shift> <register> is permitted for this |
| instruction. */ |
| |
| static int |
| decode_shift (str, unrestrict) |
| char ** str; |
| int unrestrict; |
| { |
| const struct asm_shift_name * shift; |
| char * p; |
| char c; |
| |
| skip_whitespace (* str); |
| |
| for (p = * str; ISALPHA (* p); p ++) |
| ; |
| |
| if (p == * str) |
| { |
| inst.error = _("shift expression expected"); |
| return FAIL; |
| } |
| |
| c = * p; |
| * p = '\0'; |
| shift = (const struct asm_shift_name *) hash_find (arm_shift_hsh, * str); |
| * p = c; |
| |
| if (shift == NULL) |
| { |
| inst.error = _("shift expression expected"); |
| return FAIL; |
| } |
| |
| assert (shift->properties->index == shift_properties[shift->properties->index].index); |
| |
| if (shift->properties->index == SHIFT_RRX) |
| { |
| * str = p; |
| inst.instruction |= shift->properties->bit_field; |
| return SUCCESS; |
| } |
| |
| skip_whitespace (p); |
| |
| if (unrestrict && reg_required_here (& p, 8) != FAIL) |
| { |
| inst.instruction |= shift->properties->bit_field | SHIFT_BY_REG; |
| * str = p; |
| return SUCCESS; |
| } |
| else if (! is_immediate_prefix (* p)) |
| { |
| inst.error = (unrestrict |
| ? _("shift requires register or #expression") |
| : _("shift requires #expression")); |
| * str = p; |
| return FAIL; |
| } |
| |
| inst.error = NULL; |
| p ++; |
| |
| if (my_get_expression (& inst.reloc.exp, & p)) |
| return FAIL; |
| |
| /* Validate some simple #expressions. */ |
| if (inst.reloc.exp.X_op == O_constant) |
| { |
| unsigned num = inst.reloc.exp.X_add_number; |
| |
| /* Reject operations greater than 32. */ |
| if (num > 32 |
| /* Reject a shift of 0 unless the mode allows it. */ |
| || (num == 0 && shift->properties->allows_0 == 0) |
| /* Reject a shift of 32 unless the mode allows it. */ |
| || (num == 32 && shift->properties->allows_32 == 0) |
| ) |
| { |
| /* As a special case we allow a shift of zero for |
| modes that do not support it to be recoded as an |
| logical shift left of zero (ie nothing). We warn |
| about this though. */ |
| if (num == 0) |
| { |
| as_warn (_("shift of 0 ignored.")); |
| shift = & shift_names[0]; |
| assert (shift->properties->index == SHIFT_LSL); |
| } |
| else |
| { |
| inst.error = _("invalid immediate shift"); |
| return FAIL; |
| } |
| } |
| |
| /* Shifts of 32 are encoded as 0, for those shifts that |
| support it. */ |
| if (num == 32) |
| num = 0; |
| |
| inst.instruction |= (num << 7) | shift->properties->bit_field; |
| } |
| else |
| { |
| inst.reloc.type = BFD_RELOC_ARM_SHIFT_IMM; |
| inst.reloc.pc_rel = 0; |
| inst.instruction |= shift->properties->bit_field; |
| } |
| |
| * str = p; |
| return SUCCESS; |
| } |
| |
| /* Do those data_ops which can take a negative immediate constant |
| by altering the instuction. A bit of a hack really. |
| MOV <-> MVN |
| AND <-> BIC |
| ADC <-> SBC |
| by inverting the second operand, and |
| ADD <-> SUB |
| CMP <-> CMN |
| by negating the second operand. */ |
| |
| static int |
| negate_data_op (instruction, value) |
| unsigned long * instruction; |
| unsigned long value; |
| { |
| int op, new_inst; |
| unsigned long negated, inverted; |
| |
| negated = validate_immediate (-value); |
| inverted = validate_immediate (~value); |
| |
| op = (*instruction >> DATA_OP_SHIFT) & 0xf; |
| switch (op) |
| { |
| /* First negates. */ |
| case OPCODE_SUB: /* ADD <-> SUB */ |
| new_inst = OPCODE_ADD; |
| value = negated; |
| break; |
| |
| case OPCODE_ADD: |
| new_inst = OPCODE_SUB; |
| value = negated; |
| break; |
| |
| case OPCODE_CMP: /* CMP <-> CMN */ |
| new_inst = OPCODE_CMN; |
| value = negated; |
| break; |
| |
| case OPCODE_CMN: |
| new_inst = OPCODE_CMP; |
| value = negated; |
| break; |
| |
| /* Now Inverted ops. */ |
| case OPCODE_MOV: /* MOV <-> MVN */ |
| new_inst = OPCODE_MVN; |
| value = inverted; |
| break; |
| |
| case OPCODE_MVN: |
| new_inst = OPCODE_MOV; |
| value = inverted; |
| break; |
| |
| case OPCODE_AND: /* AND <-> BIC */ |
| new_inst = OPCODE_BIC; |
| value = inverted; |
| break; |
| |
| case OPCODE_BIC: |
| new_inst = OPCODE_AND; |
| value = inverted; |
| break; |
| |
| case OPCODE_ADC: /* ADC <-> SBC */ |
| new_inst = OPCODE_SBC; |
| value = inverted; |
| break; |
| |
| case OPCODE_SBC: |
| new_inst = OPCODE_ADC; |
| value = inverted; |
| break; |
| |
| /* We cannot do anything. */ |
| default: |
| return FAIL; |
| } |
| |
| if (value == (unsigned) FAIL) |
| return FAIL; |
| |
| *instruction &= OPCODE_MASK; |
| *instruction |= new_inst << DATA_OP_SHIFT; |
| return value; |
| } |
| |
| static int |
| data_op2 (str) |
| char ** str; |
| { |
| int value; |
| expressionS expr; |
| |
| skip_whitespace (* str); |
| |
| if (reg_required_here (str, 0) != FAIL) |
| { |
| if (skip_past_comma (str) == SUCCESS) |
| /* Shift operation on register. */ |
| return decode_shift (str, NO_SHIFT_RESTRICT); |
| |
| return SUCCESS; |
| } |
| else |
| { |
| /* Immediate expression. */ |
| if (is_immediate_prefix (**str)) |
| { |
| (*str)++; |
| inst.error = NULL; |
| |
| if (my_get_expression (&inst.reloc.exp, str)) |
| return FAIL; |
| |
| if (inst.reloc.exp.X_add_symbol) |
| { |
| inst.reloc.type = BFD_RELOC_ARM_IMMEDIATE; |
| inst.reloc.pc_rel = 0; |
| } |
| else |
| { |
| if (skip_past_comma (str) == SUCCESS) |
| { |
| /* #x, y -- ie explicit rotation by Y. */ |
| if (my_get_expression (&expr, str)) |
| return FAIL; |
| |
| if (expr.X_op != O_constant) |
| { |
| inst.error = _("constant expression expected"); |
| return FAIL; |
| } |
| |
| /* Rotate must be a multiple of 2. */ |
| if (((unsigned) expr.X_add_number) > 30 |
| || (expr.X_add_number & 1) != 0 |
| || ((unsigned) inst.reloc.exp.X_add_number) > 255) |
| { |
| inst.error = _("invalid constant"); |
| return FAIL; |
| } |
| inst.instruction |= INST_IMMEDIATE; |
| inst.instruction |= inst.reloc.exp.X_add_number; |
| inst.instruction |= expr.X_add_number << 7; |
| return SUCCESS; |
| } |
| |
| /* Implicit rotation, select a suitable one. */ |
| value = validate_immediate (inst.reloc.exp.X_add_number); |
| |
| if (value == FAIL) |
| { |
| /* Can't be done. Perhaps the code reads something like |
| "add Rd, Rn, #-n", where "sub Rd, Rn, #n" would be OK. */ |
| if ((value = negate_data_op (&inst.instruction, |
| inst.reloc.exp.X_add_number)) |
| == FAIL) |
| { |
| inst.error = _("invalid constant"); |
| return FAIL; |
| } |
| } |
| |
| inst.instruction |= value; |
| } |
| |
| inst.instruction |= INST_IMMEDIATE; |
| return SUCCESS; |
| } |
| |
| (*str)++; |
| inst.error = _("register or shift expression expected"); |
| return FAIL; |
| } |
| } |
| |
| static int |
| fp_op2 (str) |
| char ** str; |
| { |
| skip_whitespace (* str); |
| |
| if (fp_reg_required_here (str, 0) != FAIL) |
| return SUCCESS; |
| else |
| { |
| /* Immediate expression. */ |
| if (*((*str)++) == '#') |
| { |
| int i; |
| |
| inst.error = NULL; |
| |
| skip_whitespace (* str); |
| |
| /* First try and match exact strings, this is to guarantee |
| that some formats will work even for cross assembly. */ |
| |
| for (i = 0; fp_const[i]; i++) |
| { |
| if (strncmp (*str, fp_const[i], strlen (fp_const[i])) == 0) |
| { |
| char *start = *str; |
| |
| *str += strlen (fp_const[i]); |
| if (is_end_of_line[(unsigned char) **str]) |
| { |
| inst.instruction |= i + 8; |
| return SUCCESS; |
| } |
| *str = start; |
| } |
| } |
| |
| /* Just because we didn't get a match doesn't mean that the |
| constant isn't valid, just that it is in a format that we |
| don't automatically recognize. Try parsing it with |
| the standard expression routines. */ |
| if ((i = my_get_float_expression (str)) >= 0) |
| { |
| inst.instruction |= i + 8; |
| return SUCCESS; |
| } |
| |
| inst.error = _("invalid floating point immediate expression"); |
| return FAIL; |
| } |
| inst.error = |
| _("floating point register or immediate expression expected"); |
| return FAIL; |
| } |
| } |
| |
| static void |
| do_arit (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || reg_required_here (&str, 16) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || data_op2 (&str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_adr (str) |
| char * str; |
| { |
| /* This is a pseudo-op of the form "adr rd, label" to be converted |
| into a relative address of the form "add rd, pc, #label-.-8". */ |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || my_get_expression (&inst.reloc.exp, &str)) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| /* Frag hacking will turn this into a sub instruction if the offset turns |
| out to be negative. */ |
| inst.reloc.type = BFD_RELOC_ARM_IMMEDIATE; |
| inst.reloc.exp.X_add_number -= 8; /* PC relative adjust. */ |
| inst.reloc.pc_rel = 1; |
| |
| end_of_line (str); |
| } |
| |
| static void |
| do_adrl (str) |
| char * str; |
| { |
| /* This is a pseudo-op of the form "adrl rd, label" to be converted |
| into a relative address of the form: |
| add rd, pc, #low(label-.-8)" |
| add rd, rd, #high(label-.-8)" */ |
| |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || my_get_expression (&inst.reloc.exp, &str)) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| |
| return; |
| } |
| |
| end_of_line (str); |
| /* Frag hacking will turn this into a sub instruction if the offset turns |
| out to be negative. */ |
| inst.reloc.type = BFD_RELOC_ARM_ADRL_IMMEDIATE; |
| inst.reloc.exp.X_add_number -= 8; /* PC relative adjust */ |
| inst.reloc.pc_rel = 1; |
| inst.size = INSN_SIZE * 2; |
| |
| return; |
| } |
| |
| static void |
| do_cmp (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 16) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || data_op2 (&str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_mov (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || data_op2 (&str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static int |
| ldst_extend (str) |
| char ** str; |
| { |
| int add = INDEX_UP; |
| |
| switch (**str) |
| { |
| case '#': |
| case '$': |
| (*str)++; |
| if (my_get_expression (& inst.reloc.exp, str)) |
| return FAIL; |
| |
| if (inst.reloc.exp.X_op == O_constant) |
| { |
| int value = inst.reloc.exp.X_add_number; |
| |
| if (value < -4095 || value > 4095) |
| { |
| inst.error = _("address offset too large"); |
| return FAIL; |
| } |
| |
| if (value < 0) |
| { |
| value = -value; |
| add = 0; |
| } |
| |
| inst.instruction |= add | value; |
| } |
| else |
| { |
| inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM; |
| inst.reloc.pc_rel = 0; |
| } |
| return SUCCESS; |
| |
| case '-': |
| add = 0; |
| /* Fall through. */ |
| |
| case '+': |
| (*str)++; |
| /* Fall through. */ |
| |
| default: |
| if (reg_required_here (str, 0) == FAIL) |
| return FAIL; |
| |
| inst.instruction |= add | OFFSET_REG; |
| if (skip_past_comma (str) == SUCCESS) |
| return decode_shift (str, SHIFT_RESTRICT); |
| |
| return SUCCESS; |
| } |
| } |
| |
| static void |
| do_ldst (str) |
| char * str; |
| { |
| int pre_inc = 0; |
| int conflict_reg; |
| int value; |
| |
| skip_whitespace (str); |
| |
| if ((conflict_reg = reg_required_here (&str, 12)) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL) |
| { |
| inst.error = _("address expected"); |
| return; |
| } |
| |
| if (*str == '[') |
| { |
| int reg; |
| |
| str++; |
| |
| skip_whitespace (str); |
| |
| if ((reg = reg_required_here (&str, 16)) == FAIL) |
| return; |
| |
| /* Conflicts can occur on stores as well as loads. */ |
| conflict_reg = (conflict_reg == reg); |
| |
| skip_whitespace (str); |
| |
| if (*str == ']') |
| { |
| str ++; |
| |
| if (skip_past_comma (&str) == SUCCESS) |
| { |
| /* [Rn],... (post inc) */ |
| if (ldst_extend (&str) == FAIL) |
| return; |
| if (conflict_reg) |
| as_warn (_("%s register same as write-back base"), |
| ((inst.instruction & LOAD_BIT) |
| ? _("destination") : _("source"))); |
| } |
| else |
| { |
| /* [Rn] */ |
| skip_whitespace (str); |
| |
| if (*str == '!') |
| { |
| if (conflict_reg) |
| as_warn (_("%s register same as write-back base"), |
| ((inst.instruction & LOAD_BIT) |
| ? _("destination") : _("source"))); |
| str++; |
| inst.instruction |= WRITE_BACK; |
| } |
| |
| inst.instruction |= INDEX_UP; |
| pre_inc = 1; |
| } |
| } |
| else |
| { |
| /* [Rn,...] */ |
| if (skip_past_comma (&str) == FAIL) |
| { |
| inst.error = _("pre-indexed expression expected"); |
| return; |
| } |
| |
| pre_inc = 1; |
| if (ldst_extend (&str) == FAIL) |
| return; |
| |
| skip_whitespace (str); |
| |
| if (*str++ != ']') |
| { |
| inst.error = _("missing ]"); |
| return; |
| } |
| |
| skip_whitespace (str); |
| |
| if (*str == '!') |
| { |
| if (conflict_reg) |
| as_warn (_("%s register same as write-back base"), |
| ((inst.instruction & LOAD_BIT) |
| ? _("destination") : _("source"))); |
| str++; |
| inst.instruction |= WRITE_BACK; |
| } |
| } |
| } |
| else if (*str == '=') |
| { |
| if ((inst.instruction & LOAD_BIT) == 0) |
| { |
| inst.error = _("invalid pseudo operation"); |
| return; |
| } |
| |
| /* Parse an "ldr Rd, =expr" instruction; this is another pseudo op. */ |
| str++; |
| |
| skip_whitespace (str); |
| |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| |
| if (inst.reloc.exp.X_op != O_constant |
| && inst.reloc.exp.X_op != O_symbol) |
| { |
| inst.error = _("constant expression expected"); |
| return; |
| } |
| |
| if (inst.reloc.exp.X_op == O_constant) |
| { |
| value = validate_immediate (inst.reloc.exp.X_add_number); |
| |
| if (value != FAIL) |
| { |
| /* This can be done with a mov instruction. */ |
| inst.instruction &= LITERAL_MASK; |
| inst.instruction |= (INST_IMMEDIATE |
| | (OPCODE_MOV << DATA_OP_SHIFT)); |
| inst.instruction |= value & 0xfff; |
| end_of_line (str); |
| return; |
| } |
| |
| value = validate_immediate (~inst.reloc.exp.X_add_number); |
| |
| if (value != FAIL) |
| { |
| /* This can be done with a mvn instruction. */ |
| inst.instruction &= LITERAL_MASK; |
| inst.instruction |= (INST_IMMEDIATE |
| | (OPCODE_MVN << DATA_OP_SHIFT)); |
| inst.instruction |= value & 0xfff; |
| end_of_line (str); |
| return; |
| } |
| } |
| |
| /* Insert into literal pool. */ |
| if (add_to_lit_pool () == FAIL) |
| { |
| if (!inst.error) |
| inst.error = _("literal pool insertion failed"); |
| return; |
| } |
| |
| /* Change the instruction exp to point to the pool. */ |
| inst.reloc.type = BFD_RELOC_ARM_LITERAL; |
| inst.reloc.pc_rel = 1; |
| inst.instruction |= (REG_PC << 16); |
| pre_inc = 1; |
| } |
| else |
| { |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| |
| inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM; |
| #ifndef TE_WINCE |
| /* PC rel adjust. */ |
| inst.reloc.exp.X_add_number -= 8; |
| #endif |
| inst.reloc.pc_rel = 1; |
| inst.instruction |= (REG_PC << 16); |
| pre_inc = 1; |
| } |
| |
| inst.instruction |= (pre_inc ? PRE_INDEX : 0); |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_ldstt (str) |
| char * str; |
| { |
| int conflict_reg; |
| |
| skip_whitespace (str); |
| |
| if ((conflict_reg = reg_required_here (& str, 12)) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL) |
| { |
| inst.error = _("address expected"); |
| return; |
| } |
| |
| if (*str == '[') |
| { |
| int reg; |
| |
| str++; |
| |
| skip_whitespace (str); |
| |
| if ((reg = reg_required_here (&str, 16)) == FAIL) |
| return; |
| |
| /* ldrt/strt always use post-indexed addressing, so if the base is |
| the same as Rd, we warn. */ |
| if (conflict_reg == reg) |
| as_warn (_("%s register same as write-back base"), |
| ((inst.instruction & LOAD_BIT) |
| ? _("destination") : _("source"))); |
| |
| skip_whitespace (str); |
| |
| if (*str == ']') |
| { |
| str ++; |
| |
| if (skip_past_comma (&str) == SUCCESS) |
| { |
| /* [Rn],... (post inc) */ |
| if (ldst_extend (&str) == FAIL) |
| return; |
| } |
| else |
| { |
| /* [Rn] */ |
| skip_whitespace (str); |
| |
| /* Skip a write-back '!'. */ |
| if (*str == '!') |
| str++; |
| |
| inst.instruction |= INDEX_UP; |
| } |
| } |
| else |
| { |
| inst.error = _("post-indexed expression expected"); |
| return; |
| } |
| } |
| else |
| { |
| inst.error = _("post-indexed expression expected"); |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static int |
| ldst_extend_v4 (str) |
| char ** str; |
| { |
| int add = INDEX_UP; |
| |
| switch (**str) |
| { |
| case '#': |
| case '$': |
| (*str)++; |
| if (my_get_expression (& inst.reloc.exp, str)) |
| return FAIL; |
| |
| if (inst.reloc.exp.X_op == O_constant) |
| { |
| int value = inst.reloc.exp.X_add_number; |
| |
| if (value < -255 || value > 255) |
| { |
| inst.error = _("address offset too large"); |
| return FAIL; |
| } |
| |
| if (value < 0) |
| { |
| value = -value; |
| add = 0; |
| } |
| |
| /* Halfword and signextension instructions have the |
| immediate value split across bits 11..8 and bits 3..0. */ |
| inst.instruction |= (add | HWOFFSET_IMM |
| | ((value >> 4) << 8) | (value & 0xF)); |
| } |
| else |
| { |
| inst.instruction |= HWOFFSET_IMM; |
| inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM8; |
| inst.reloc.pc_rel = 0; |
| } |
| return SUCCESS; |
| |
| case '-': |
| add = 0; |
| /* Fall through. */ |
| |
| case '+': |
| (*str)++; |
| /* Fall through. */ |
| |
| default: |
| if (reg_required_here (str, 0) == FAIL) |
| return FAIL; |
| |
| inst.instruction |= add; |
| return SUCCESS; |
| } |
| } |
| |
| /* Halfword and signed-byte load/store operations. */ |
| static void |
| do_ldstv4 (str) |
| char * str; |
| { |
| int pre_inc = 0; |
| int conflict_reg; |
| int value; |
| |
| skip_whitespace (str); |
| |
| if ((conflict_reg = reg_required_here (& str, 12)) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (& str) == FAIL) |
| { |
| inst.error = _("address expected"); |
| return; |
| } |
| |
| if (*str == '[') |
| { |
| int reg; |
| |
| str++; |
| |
| skip_whitespace (str); |
| |
| if ((reg = reg_required_here (&str, 16)) == FAIL) |
| return; |
| |
| /* Conflicts can occur on stores as well as loads. */ |
| conflict_reg = (conflict_reg == reg); |
| |
| skip_whitespace (str); |
| |
| if (*str == ']') |
| { |
| str ++; |
| |
| if (skip_past_comma (&str) == SUCCESS) |
| { |
| /* [Rn],... (post inc) */ |
| if (ldst_extend_v4 (&str) == FAIL) |
| return; |
| if (conflict_reg) |
| as_warn (_("%s register same as write-back base"), |
| ((inst.instruction & LOAD_BIT) |
| ? _("destination") : _("source"))); |
| } |
| else |
| { |
| /* [Rn] */ |
| inst.instruction |= HWOFFSET_IMM; |
| |
| skip_whitespace (str); |
| |
| if (*str == '!') |
| { |
| if (conflict_reg) |
| as_warn (_("%s register same as write-back base"), |
| ((inst.instruction & LOAD_BIT) |
| ? _("destination") : _("source"))); |
| str++; |
| inst.instruction |= WRITE_BACK; |
| } |
| |
| inst.instruction |= INDEX_UP; |
| pre_inc = 1; |
| } |
| } |
| else |
| { |
| /* [Rn,...] */ |
| if (skip_past_comma (&str) == FAIL) |
| { |
| inst.error = _("pre-indexed expression expected"); |
| return; |
| } |
| |
| pre_inc = 1; |
| if (ldst_extend_v4 (&str) == FAIL) |
| return; |
| |
| skip_whitespace (str); |
| |
| if (*str++ != ']') |
| { |
| inst.error = _("missing ]"); |
| return; |
| } |
| |
| skip_whitespace (str); |
| |
| if (*str == '!') |
| { |
| if (conflict_reg) |
| as_warn (_("%s register same as write-back base"), |
| ((inst.instruction & LOAD_BIT) |
| ? _("destination") : _("source"))); |
| str++; |
| inst.instruction |= WRITE_BACK; |
| } |
| } |
| } |
| else if (*str == '=') |
| { |
| if ((inst.instruction & LOAD_BIT) == 0) |
| { |
| inst.error = _("invalid pseudo operation"); |
| return; |
| } |
| |
| /* XXX Does this work correctly for half-word/byte ops? */ |
| /* Parse an "ldr Rd, =expr" instruction; this is another pseudo op. */ |
| str++; |
| |
| skip_whitespace (str); |
| |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| |
| if (inst.reloc.exp.X_op != O_constant |
| && inst.reloc.exp.X_op != O_symbol) |
| { |
| inst.error = _("constant expression expected"); |
| return; |
| } |
| |
| if (inst.reloc.exp.X_op == O_constant) |
| { |
| value = validate_immediate (inst.reloc.exp.X_add_number); |
| |
| if (value != FAIL) |
| { |
| /* This can be done with a mov instruction. */ |
| inst.instruction &= LITERAL_MASK; |
| inst.instruction |= INST_IMMEDIATE | (OPCODE_MOV << DATA_OP_SHIFT); |
| inst.instruction |= value & 0xfff; |
| end_of_line (str); |
| return; |
| } |
| |
| value = validate_immediate (~ inst.reloc.exp.X_add_number); |
| |
| if (value != FAIL) |
| { |
| /* This can be done with a mvn instruction. */ |
| inst.instruction &= LITERAL_MASK; |
| inst.instruction |= INST_IMMEDIATE | (OPCODE_MVN << DATA_OP_SHIFT); |
| inst.instruction |= value & 0xfff; |
| end_of_line (str); |
| return; |
| } |
| } |
| |
| /* Insert into literal pool. */ |
| if (add_to_lit_pool () == FAIL) |
| { |
| if (!inst.error) |
| inst.error = _("literal pool insertion failed"); |
| return; |
| } |
| |
| /* Change the instruction exp to point to the pool. */ |
| inst.instruction |= HWOFFSET_IMM; |
| inst.reloc.type = BFD_RELOC_ARM_HWLITERAL; |
| inst.reloc.pc_rel = 1; |
| inst.instruction |= (REG_PC << 16); |
| pre_inc = 1; |
| } |
| else |
| { |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| |
| inst.instruction |= HWOFFSET_IMM; |
| inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM8; |
| #ifndef TE_WINCE |
| /* PC rel adjust. */ |
| inst.reloc.exp.X_add_number -= 8; |
| #endif |
| inst.reloc.pc_rel = 1; |
| inst.instruction |= (REG_PC << 16); |
| pre_inc = 1; |
| } |
| |
| inst.instruction |= (pre_inc ? PRE_INDEX : 0); |
| end_of_line (str); |
| return; |
| } |
| |
| static long |
| reg_list (strp) |
| char ** strp; |
| { |
| char * str = * strp; |
| long range = 0; |
| int another_range; |
| |
| /* We come back here if we get ranges concatenated by '+' or '|'. */ |
| do |
| { |
| another_range = 0; |
| |
| if (*str == '{') |
| { |
| int in_range = 0; |
| int cur_reg = -1; |
| |
| str++; |
| do |
| { |
| int reg; |
| |
| skip_whitespace (str); |
| |
| if ((reg = reg_required_here (& str, -1)) == FAIL) |
| return FAIL; |
| |
| if (in_range) |
| { |
| int i; |
| |
| if (reg <= cur_reg) |
| { |
| inst.error = _("bad range in register list"); |
| return FAIL; |
| } |
| |
| for (i = cur_reg + 1; i < reg; i++) |
| { |
| if (range & (1 << i)) |
| as_tsktsk |
| (_("Warning: duplicated register (r%d) in register list"), |
| i); |
| else |
| range |= 1 << i; |
| } |
| in_range = 0; |
| } |
| |
| if (range & (1 << reg)) |
| as_tsktsk (_("Warning: duplicated register (r%d) in register list"), |
| reg); |
| else if (reg <= cur_reg) |
| as_tsktsk (_("Warning: register range not in ascending order")); |
| |
| range |= 1 << reg; |
| cur_reg = reg; |
| } |
| while (skip_past_comma (&str) != FAIL |
| || (in_range = 1, *str++ == '-')); |
| str--; |
| skip_whitespace (str); |
| |
| if (*str++ != '}') |
| { |
| inst.error = _("missing `}'"); |
| return FAIL; |
| } |
| } |
| else |
| { |
| expressionS expr; |
| |
| if (my_get_expression (&expr, &str)) |
| return FAIL; |
| |
| if (expr.X_op == O_constant) |
| { |
| if (expr.X_add_number |
| != (expr.X_add_number & 0x0000ffff)) |
| { |
| inst.error = _("invalid register mask"); |
| return FAIL; |
| } |
| |
| if ((range & expr.X_add_number) != 0) |
| { |
| int regno = range & expr.X_add_number; |
| |
| regno &= -regno; |
| regno = (1 << regno) - 1; |
| as_tsktsk |
| (_("Warning: duplicated register (r%d) in register list"), |
| regno); |
| } |
| |
| range |= expr.X_add_number; |
| } |
| else |
| { |
| if (inst.reloc.type != 0) |
| { |
| inst.error = _("expression too complex"); |
| return FAIL; |
| } |
| |
| memcpy (&inst.reloc.exp, &expr, sizeof (expressionS)); |
| inst.reloc.type = BFD_RELOC_ARM_MULTI; |
| inst.reloc.pc_rel = 0; |
| } |
| } |
| |
| skip_whitespace (str); |
| |
| if (*str == '|' || *str == '+') |
| { |
| str++; |
| another_range = 1; |
| } |
| } |
| while (another_range); |
| |
| *strp = str; |
| return range; |
| } |
| |
| static void |
| do_ldmstm (str) |
| char * str; |
| { |
| int base_reg; |
| long range; |
| |
| skip_whitespace (str); |
| |
| if ((base_reg = reg_required_here (&str, 16)) == FAIL) |
| return; |
| |
| if (base_reg == REG_PC) |
| { |
| inst.error = _("r15 not allowed as base register"); |
| return; |
| } |
| |
| skip_whitespace (str); |
| |
| if (*str == '!') |
| { |
| inst.instruction |= WRITE_BACK; |
| str++; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || (range = reg_list (&str)) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (*str == '^') |
| { |
| str++; |
| inst.instruction |= LDM_TYPE_2_OR_3; |
| } |
| |
| if (inst.instruction & WRITE_BACK) |
| { |
| /* Check for unpredictable uses of writeback. */ |
| if (inst.instruction & LOAD_BIT) |
| { |
| /* Not allowed in LDM type 2. */ |
| if ((inst.instruction & LDM_TYPE_2_OR_3) |
| && ((range & (1 << REG_PC)) == 0)) |
| as_warn (_("writeback of base register is UNPREDICTABLE")); |
| /* Only allowed if base reg not in list for other types. */ |
| else if (range & (1 << base_reg)) |
| as_warn (_("writeback of base register when in register list is UNPREDICTABLE")); |
| } |
| else /* STM. */ |
| { |
| /* Not allowed for type 2. */ |
| if (inst.instruction & LDM_TYPE_2_OR_3) |
| as_warn (_("writeback of base register is UNPREDICTABLE")); |
| /* Only allowed if base reg not in list, or first in list. */ |
| else if ((range & (1 << base_reg)) |
| && (range & ((1 << base_reg) - 1))) |
| as_warn (_("if writeback register is in list, it must be the lowest reg in the list")); |
| } |
| } |
| |
| inst.instruction |= range; |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_swi (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| /* Allow optional leading '#'. */ |
| if (is_immediate_prefix (*str)) |
| str++; |
| |
| if (my_get_expression (& inst.reloc.exp, & str)) |
| return; |
| |
| inst.reloc.type = BFD_RELOC_ARM_SWI; |
| inst.reloc.pc_rel = 0; |
| end_of_line (str); |
| |
| return; |
| } |
| |
| static void |
| do_swap (str) |
| char * str; |
| { |
| int reg; |
| |
| skip_whitespace (str); |
| |
| if ((reg = reg_required_here (&str, 12)) == FAIL) |
| return; |
| |
| if (reg == REG_PC) |
| { |
| inst.error = _("r15 not allowed in swap"); |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || (reg = reg_required_here (&str, 0)) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (reg == REG_PC) |
| { |
| inst.error = _("r15 not allowed in swap"); |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || *str++ != '[') |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| skip_whitespace (str); |
| |
| if ((reg = reg_required_here (&str, 16)) == FAIL) |
| return; |
| |
| if (reg == REG_PC) |
| { |
| inst.error = BAD_PC; |
| return; |
| } |
| |
| skip_whitespace (str); |
| |
| if (*str++ != ']') |
| { |
| inst.error = _("missing ]"); |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_branch (str) |
| char * str; |
| { |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| |
| #ifdef OBJ_ELF |
| { |
| char * save_in; |
| |
| /* ScottB: February 5, 1998 - Check to see of PLT32 reloc |
| required for the instruction. */ |
| |
| /* arm_parse_reloc () works on input_line_pointer. |
| We actually want to parse the operands to the branch instruction |
| passed in 'str'. Save the input pointer and restore it later. */ |
| save_in = input_line_pointer; |
| input_line_pointer = str; |
| if (inst.reloc.exp.X_op == O_symbol |
| && *str == '(' |
| && arm_parse_reloc () == BFD_RELOC_ARM_PLT32) |
| { |
| inst.reloc.type = BFD_RELOC_ARM_PLT32; |
| inst.reloc.pc_rel = 0; |
| /* Modify str to point to after parsed operands, otherwise |
| end_of_line() will complain about the (PLT) left in str. */ |
| str = input_line_pointer; |
| } |
| else |
| { |
| inst.reloc.type = BFD_RELOC_ARM_PCREL_BRANCH; |
| inst.reloc.pc_rel = 1; |
| } |
| input_line_pointer = save_in; |
| } |
| #else |
| inst.reloc.type = BFD_RELOC_ARM_PCREL_BRANCH; |
| inst.reloc.pc_rel = 1; |
| #endif /* OBJ_ELF */ |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_bx (str) |
| char * str; |
| { |
| int reg; |
| |
| skip_whitespace (str); |
| |
| if ((reg = reg_required_here (&str, 0)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| /* Note - it is not illegal to do a "bx pc". Useless, but not illegal. */ |
| if (reg == REG_PC) |
| as_tsktsk (_("use of r15 in bx in ARM mode is not really useful")); |
| |
| end_of_line (str); |
| } |
| |
| static void |
| do_cdp (str) |
| char * str; |
| { |
| /* Co-processor data operation. |
| Format: CDP{cond} CP#,<expr>,CRd,CRn,CRm{,<expr>} */ |
| skip_whitespace (str); |
| |
| if (co_proc_number (&str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_opc_expr (&str, 20,4) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_reg_required_here (&str, 12) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_reg_required_here (&str, 16) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_reg_required_here (&str, 0) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == SUCCESS) |
| { |
| if (cp_opc_expr (&str, 5, 3) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_lstc (str) |
| char * str; |
| { |
| /* Co-processor register load/store. |
| Format: <LDC|STC{cond}[L] CP#,CRd,<address> */ |
| |
| skip_whitespace (str); |
| |
| if (co_proc_number (&str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_reg_required_here (&str, 12) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_address_required_here (&str, CP_WB_OK) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_co_reg (str) |
| char * str; |
| { |
| /* Co-processor register transfer. |
| Format: <MCR|MRC>{cond} CP#,<expr1>,Rd,CRn,CRm{,<expr2>} */ |
| |
| skip_whitespace (str); |
| |
| if (co_proc_number (&str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_opc_expr (&str, 21, 3) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || reg_required_here (&str, 12) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_reg_required_here (&str, 16) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_reg_required_here (&str, 0) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == SUCCESS) |
| { |
| if (cp_opc_expr (&str, 5, 3) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_fpa_ctrl (str) |
| char * str; |
| { |
| /* FP control registers. |
| Format: <WFS|RFS|WFC|RFC>{cond} Rn */ |
| |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_fpa_ldst (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (fp_reg_required_here (&str, 12) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_address_required_here (&str, CP_WB_OK) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| } |
| |
| static void |
| do_fpa_ldmstm (str) |
| char * str; |
| { |
| int num_regs; |
| |
| skip_whitespace (str); |
| |
| if (fp_reg_required_here (&str, 12) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| /* Get Number of registers to transfer. */ |
| if (skip_past_comma (&str) == FAIL |
| || my_get_expression (&inst.reloc.exp, &str)) |
| { |
| if (! inst.error) |
| inst.error = _("constant expression expected"); |
| return; |
| } |
| |
| if (inst.reloc.exp.X_op != O_constant) |
| { |
| inst.error = _("constant value required for number of registers"); |
| return; |
| } |
| |
| num_regs = inst.reloc.exp.X_add_number; |
| |
| if (num_regs < 1 || num_regs > 4) |
| { |
| inst.error = _("number of registers must be in the range [1:4]"); |
| return; |
| } |
| |
| switch (num_regs) |
| { |
| case 1: |
| inst.instruction |= CP_T_X; |
| break; |
| case 2: |
| inst.instruction |= CP_T_Y; |
| break; |
| case 3: |
| inst.instruction |= CP_T_Y | CP_T_X; |
| break; |
| case 4: |
| break; |
| default: |
| abort (); |
| } |
| |
| if (inst.instruction & (CP_T_Pre | CP_T_UD)) /* ea/fd format. */ |
| { |
| int reg; |
| int write_back; |
| int offset; |
| |
| /* The instruction specified "ea" or "fd", so we can only accept |
| [Rn]{!}. The instruction does not really support stacking or |
| unstacking, so we have to emulate these by setting appropriate |
| bits and offsets. */ |
| if (skip_past_comma (&str) == FAIL |
| || *str != '[') |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| str++; |
| skip_whitespace (str); |
| |
| if ((reg = reg_required_here (&str, 16)) == FAIL) |
| return; |
| |
| skip_whitespace (str); |
| |
| if (*str != ']') |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| str++; |
| if (*str == '!') |
| { |
| write_back = 1; |
| str++; |
| if (reg == REG_PC) |
| { |
| inst.error = |
| _("r15 not allowed as base register with write-back"); |
| return; |
| } |
| } |
| else |
| write_back = 0; |
| |
| if (inst.instruction & CP_T_Pre) |
| { |
| /* Pre-decrement. */ |
| offset = 3 * num_regs; |
| if (write_back) |
| inst.instruction |= CP_T_WB; |
| } |
| else |
| { |
| /* Post-increment. */ |
| if (write_back) |
| { |
| inst.instruction |= CP_T_WB; |
| offset = 3 * num_regs; |
| } |
| else |
| { |
| /* No write-back, so convert this into a standard pre-increment |
| instruction -- aesthetically more pleasing. */ |
| inst.instruction |= CP_T_Pre | CP_T_UD; |
| offset = 0; |
| } |
| } |
| |
| inst.instruction |= offset; |
| } |
| else if (skip_past_comma (&str) == FAIL |
| || cp_address_required_here (&str, CP_WB_OK) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| } |
| |
| static void |
| do_fpa_dyadic (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (fp_reg_required_here (&str, 12) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || fp_reg_required_here (&str, 16) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || fp_op2 (&str) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_fpa_monadic (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (fp_reg_required_here (&str, 12) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || fp_op2 (&str) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_fpa_cmp (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (fp_reg_required_here (&str, 16) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || fp_op2 (&str) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_fpa_from_reg (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (fp_reg_required_here (&str, 16) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || reg_required_here (&str, 12) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_fpa_to_reg (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || fp_reg_required_here (&str, 0) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static int |
| vfp_sp_reg_required_here (str, pos) |
| char **str; |
| enum vfp_sp_reg_pos pos; |
| { |
| int reg; |
| char *start = *str; |
| |
| if ((reg = arm_reg_parse (str, all_reg_maps[REG_TYPE_SN].htab)) != FAIL) |
| { |
| switch (pos) |
| { |
| case VFP_REG_Sd: |
| inst.instruction |= ((reg >> 1) << 12) | ((reg & 1) << 22); |
| break; |
| |
| case VFP_REG_Sn: |
| inst.instruction |= ((reg >> 1) << 16) | ((reg & 1) << 7); |
| break; |
| |
| case VFP_REG_Sm: |
| inst.instruction |= ((reg >> 1) << 0) | ((reg & 1) << 5); |
| break; |
| |
| default: |
| abort (); |
| } |
| return reg; |
| } |
| |
| /* In the few cases where we might be able to accept something else |
| this error can be overridden. */ |
| inst.error = _(all_reg_maps[REG_TYPE_SN].expected); |
| |
| /* Restore the start point. */ |
| *str = start; |
| return FAIL; |
| } |
| |
| static int |
| vfp_dp_reg_required_here (str, pos) |
| char **str; |
| enum vfp_dp_reg_pos pos; |
| { |
| int reg; |
| char *start = *str; |
| |
| if ((reg = arm_reg_parse (str, all_reg_maps[REG_TYPE_DN].htab)) != FAIL) |
| { |
| switch (pos) |
| { |
| case VFP_REG_Dd: |
| inst.instruction |= reg << 12; |
| break; |
| |
| case VFP_REG_Dn: |
| inst.instruction |= reg << 16; |
| break; |
| |
| case VFP_REG_Dm: |
| inst.instruction |= reg << 0; |
| break; |
| |
| default: |
| abort (); |
| } |
| return reg; |
| } |
| |
| /* In the few cases where we might be able to accept something else |
| this error can be overridden. */ |
| inst.error = _(all_reg_maps[REG_TYPE_DN].expected); |
| |
| /* Restore the start point. */ |
| *str = start; |
| return FAIL; |
| } |
| |
| static void |
| do_vfp_sp_monadic (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_sp_reg_required_here (&str, VFP_REG_Sd) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || vfp_sp_reg_required_here (&str, VFP_REG_Sm) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_dp_monadic (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_dp_reg_required_here (&str, VFP_REG_Dd) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || vfp_dp_reg_required_here (&str, VFP_REG_Dm) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_sp_dyadic (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_sp_reg_required_here (&str, VFP_REG_Sd) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || vfp_sp_reg_required_here (&str, VFP_REG_Sn) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || vfp_sp_reg_required_here (&str, VFP_REG_Sm) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_dp_dyadic (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_dp_reg_required_here (&str, VFP_REG_Dd) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || vfp_dp_reg_required_here (&str, VFP_REG_Dn) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || vfp_dp_reg_required_here (&str, VFP_REG_Dm) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_reg_from_sp (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || vfp_sp_reg_required_here (&str, VFP_REG_Sn) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_sp_reg2 (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || reg_required_here (&str, 16) == FAIL |
| || skip_past_comma (&str) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| /* We require exactly two consecutive SP registers. */ |
| if (vfp_sp_reg_list (&str, VFP_REG_Sm) != 2) |
| { |
| if (! inst.error) |
| inst.error = _("only two consecutive VFP SP registers allowed here"); |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_sp_from_reg (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_sp_reg_required_here (&str, VFP_REG_Sn) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || reg_required_here (&str, 12) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_reg_from_dp (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || vfp_dp_reg_required_here (&str, VFP_REG_Dn) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_reg2_from_dp (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || reg_required_here (&str, 16) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || vfp_dp_reg_required_here (&str, VFP_REG_Dm) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_dp_from_reg (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_dp_reg_required_here (&str, VFP_REG_Dn) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || reg_required_here (&str, 12) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_dp_from_reg2 (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_dp_reg_required_here (&str, VFP_REG_Dm) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || reg_required_here (&str, 12) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || reg_required_here (&str, 16)) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static const struct vfp_reg * |
| vfp_psr_parse (str) |
| char **str; |
| { |
| char *start = *str; |
| char c; |
| char *p; |
| const struct vfp_reg *vreg; |
| |
| p = start; |
| |
| /* Find the end of the current token. */ |
| do |
| { |
| c = *p++; |
| } |
| while (ISALPHA (c)); |
| |
| /* Mark it. */ |
| *--p = 0; |
| |
| for (vreg = vfp_regs + 0; |
| vreg < vfp_regs + sizeof (vfp_regs) / sizeof (struct vfp_reg); |
| vreg++) |
| { |
| if (strcmp (start, vreg->name) == 0) |
| { |
| *p = c; |
| *str = p; |
| return vreg; |
| } |
| } |
| |
| *p = c; |
| return NULL; |
| } |
| |
| static int |
| vfp_psr_required_here (str) |
| char **str; |
| { |
| char *start = *str; |
| const struct vfp_reg *vreg; |
| |
| vreg = vfp_psr_parse (str); |
| |
| if (vreg) |
| { |
| inst.instruction |= vreg->regno; |
| return SUCCESS; |
| } |
| |
| inst.error = _("VFP system register expected"); |
| |
| *str = start; |
| return FAIL; |
| } |
| |
| static void |
| do_vfp_reg_from_ctrl (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 12) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || vfp_psr_required_here (&str) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_ctrl_from_reg (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_psr_required_here (&str) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || reg_required_here (&str, 12) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_sp_ldst (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_sp_reg_required_here (&str, VFP_REG_Sd) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_address_required_here (&str, CP_NO_WB) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_dp_ldst (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_dp_reg_required_here (&str, VFP_REG_Dd) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || cp_address_required_here (&str, CP_NO_WB) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| /* Parse and encode a VFP SP register list, storing the initial |
| register in position POS and returning the range as the result. If |
| the string is invalid return FAIL (an invalid range). */ |
| static long |
| vfp_sp_reg_list (str, pos) |
| char **str; |
| enum vfp_sp_reg_pos pos; |
| { |
| long range = 0; |
| int base_reg = 0; |
| int new_base; |
| long base_bits = 0; |
| int count = 0; |
| long tempinst; |
| unsigned long mask = 0; |
| int warned = 0; |
| |
| if (**str != '{') |
| return FAIL; |
| |
| (*str)++; |
| skip_whitespace (*str); |
| |
| tempinst = inst.instruction; |
| |
| do |
| { |
| inst.instruction = 0; |
| |
| if ((new_base = vfp_sp_reg_required_here (str, pos)) == FAIL) |
| return FAIL; |
| |
| if (count == 0 || base_reg > new_base) |
| { |
| base_reg = new_base; |
| base_bits = inst.instruction; |
| } |
| |
| if (mask & (1 << new_base)) |
| { |
| inst.error = _("invalid register list"); |
| return FAIL; |
| } |
| |
| if ((mask >> new_base) != 0 && ! warned) |
| { |
| as_tsktsk (_("register list not in ascending order")); |
| warned = 1; |
| } |
| |
| mask |= 1 << new_base; |
| count++; |
| |
| skip_whitespace (*str); |
| |
| if (**str == '-') /* We have the start of a range expression */ |
| { |
| int high_range; |
| |
| (*str)++; |
| |
| if ((high_range |
| = arm_reg_parse (str, all_reg_maps[REG_TYPE_SN].htab)) |
| == FAIL) |
| { |
| inst.error = _(all_reg_maps[REG_TYPE_SN].expected); |
| return FAIL; |
| } |
| |
| if (high_range <= new_base) |
| { |
| inst.error = _("register range not in ascending order"); |
| return FAIL; |
| } |
| |
| for (new_base++; new_base <= high_range; new_base++) |
| { |
| if (mask & (1 << new_base)) |
| { |
| inst.error = _("invalid register list"); |
| return FAIL; |
| } |
| |
| mask |= 1 << new_base; |
| count++; |
| } |
| } |
| } |
| while (skip_past_comma (str) != FAIL); |
| |
| if (**str != '}') |
| { |
| inst.error = _("invalid register list"); |
| return FAIL; |
| } |
| |
| (*str)++; |
| |
| range = count; |
| |
| /* Sanity check -- should have raised a parse error above. */ |
| if (count == 0 || count > 32) |
| abort (); |
| |
| /* Final test -- the registers must be consecutive. */ |
| while (count--) |
| { |
| if ((mask & (1 << base_reg++)) == 0) |
| { |
| inst.error = _("non-contiguous register range"); |
| return FAIL; |
| } |
| } |
| |
| inst.instruction = tempinst | base_bits; |
| return range; |
| } |
| |
| static long |
| vfp_dp_reg_list (str) |
| char **str; |
| { |
| long range = 0; |
| int base_reg = 0; |
| int new_base; |
| int count = 0; |
| long tempinst; |
| unsigned long mask = 0; |
| int warned = 0; |
| |
| if (**str != '{') |
| return FAIL; |
| |
| (*str)++; |
| skip_whitespace (*str); |
| |
| tempinst = inst.instruction; |
| |
| do |
| { |
| inst.instruction = 0; |
| |
| if ((new_base = vfp_dp_reg_required_here (str, VFP_REG_Dd)) == FAIL) |
| return FAIL; |
| |
| if (count == 0 || base_reg > new_base) |
| { |
| base_reg = new_base; |
| range = inst.instruction; |
| } |
| |
| if (mask & (1 << new_base)) |
| { |
| inst.error = _("invalid register list"); |
| return FAIL; |
| } |
| |
| if ((mask >> new_base) != 0 && ! warned) |
| { |
| as_tsktsk (_("register list not in ascending order")); |
| warned = 1; |
| } |
| |
| mask |= 1 << new_base; |
| count++; |
| |
| skip_whitespace (*str); |
| |
| if (**str == '-') /* We have the start of a range expression */ |
| { |
| int high_range; |
| |
| (*str)++; |
| |
| if ((high_range |
| = arm_reg_parse (str, all_reg_maps[REG_TYPE_DN].htab)) |
| == FAIL) |
| { |
| inst.error = _(all_reg_maps[REG_TYPE_DN].expected); |
| return FAIL; |
| } |
| |
| if (high_range <= new_base) |
| { |
| inst.error = _("register range not in ascending order"); |
| return FAIL; |
| } |
| |
| for (new_base++; new_base <= high_range; new_base++) |
| { |
| if (mask & (1 << new_base)) |
| { |
| inst.error = _("invalid register list"); |
| return FAIL; |
| } |
| |
| mask |= 1 << new_base; |
| count++; |
| } |
| } |
| } |
| while (skip_past_comma (str) != FAIL); |
| |
| if (**str != '}') |
| { |
| inst.error = _("invalid register list"); |
| return FAIL; |
| } |
| |
| (*str)++; |
| |
| range |= 2 * count; |
| |
| /* Sanity check -- should have raised a parse error above. */ |
| if (count == 0 || count > 16) |
| abort (); |
| |
| /* Final test -- the registers must be consecutive. */ |
| while (count--) |
| { |
| if ((mask & (1 << base_reg++)) == 0) |
| { |
| inst.error = _("non-contiguous register range"); |
| return FAIL; |
| } |
| } |
| |
| inst.instruction = tempinst; |
| return range; |
| } |
| |
| static void |
| vfp_sp_ldstm (str, ldstm_type) |
| char *str; |
| enum vfp_ldstm_type ldstm_type; |
| { |
| long range; |
| |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 16) == FAIL) |
| return; |
| |
| skip_whitespace (str); |
| |
| if (*str == '!') |
| { |
| inst.instruction |= WRITE_BACK; |
| str++; |
| } |
| else if (ldstm_type != VFP_LDSTMIA) |
| { |
| inst.error = _("this addressing mode requires base-register writeback"); |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || (range = vfp_sp_reg_list (&str, VFP_REG_Sd)) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| inst.instruction |= range; |
| end_of_line (str); |
| } |
| |
| static void |
| vfp_dp_ldstm (str, ldstm_type) |
| char *str; |
| enum vfp_ldstm_type ldstm_type; |
| { |
| long range; |
| |
| skip_whitespace (str); |
| |
| if (reg_required_here (&str, 16) == FAIL) |
| return; |
| |
| skip_whitespace (str); |
| |
| if (*str == '!') |
| { |
| inst.instruction |= WRITE_BACK; |
| str++; |
| } |
| else if (ldstm_type != VFP_LDSTMIA && ldstm_type != VFP_LDSTMIAX) |
| { |
| inst.error = _("this addressing mode requires base-register writeback"); |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || (range = vfp_dp_reg_list (&str)) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (ldstm_type == VFP_LDSTMIAX || ldstm_type == VFP_LDSTMDBX) |
| range += 1; |
| |
| inst.instruction |= range; |
| end_of_line (str); |
| } |
| |
| static void |
| do_vfp_sp_ldstmia (str) |
| char *str; |
| { |
| vfp_sp_ldstm (str, VFP_LDSTMIA); |
| } |
| |
| static void |
| do_vfp_sp_ldstmdb (str) |
| char *str; |
| { |
| vfp_sp_ldstm (str, VFP_LDSTMDB); |
| } |
| |
| static void |
| do_vfp_dp_ldstmia (str) |
| char *str; |
| { |
| vfp_dp_ldstm (str, VFP_LDSTMIA); |
| } |
| |
| static void |
| do_vfp_dp_ldstmdb (str) |
| char *str; |
| { |
| vfp_dp_ldstm (str, VFP_LDSTMDB); |
| } |
| |
| static void |
| do_vfp_xp_ldstmia (str) |
| char *str; |
| { |
| vfp_dp_ldstm (str, VFP_LDSTMIAX); |
| } |
| |
| static void |
| do_vfp_xp_ldstmdb (str) |
| char *str; |
| { |
| vfp_dp_ldstm (str, VFP_LDSTMDBX); |
| } |
| |
| static void |
| do_vfp_sp_compare_z (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_sp_reg_required_here (&str, VFP_REG_Sd) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_dp_compare_z (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_dp_reg_required_here (&str, VFP_REG_Dd) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_dp_sp_cvt (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_dp_reg_required_here (&str, VFP_REG_Dd) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || vfp_sp_reg_required_here (&str, VFP_REG_Sm) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_vfp_sp_dp_cvt (str) |
| char *str; |
| { |
| skip_whitespace (str); |
| |
| if (vfp_sp_reg_required_here (&str, VFP_REG_Sd) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL |
| || vfp_dp_reg_required_here (&str, VFP_REG_Dm) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| end_of_line (str); |
| return; |
| } |
| |
| /* Thumb specific routines. */ |
| |
| /* Parse and validate that a register is of the right form, this saves |
| repeated checking of this information in many similar cases. |
| Unlike the 32-bit case we do not insert the register into the opcode |
| here, since the position is often unknown until the full instruction |
| has been parsed. */ |
| |
| static int |
| thumb_reg (strp, hi_lo) |
| char ** strp; |
| int hi_lo; |
| { |
| int reg; |
| |
| if ((reg = reg_required_here (strp, -1)) == FAIL) |
| return FAIL; |
| |
| switch (hi_lo) |
| { |
| case THUMB_REG_LO: |
| if (reg > 7) |
| { |
| inst.error = _("lo register required"); |
| return FAIL; |
| } |
| break; |
| |
| case THUMB_REG_HI: |
| if (reg < 8) |
| { |
| inst.error = _("hi register required"); |
| return FAIL; |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| return reg; |
| } |
| |
| /* Parse an add or subtract instruction, SUBTRACT is non-zero if the opcode |
| was SUB. */ |
| |
| static void |
| thumb_add_sub (str, subtract) |
| char * str; |
| int subtract; |
| { |
| int Rd, Rs, Rn = FAIL; |
| |
| skip_whitespace (str); |
| |
| if ((Rd = thumb_reg (&str, THUMB_REG_ANY)) == FAIL |
| || skip_past_comma (&str) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (is_immediate_prefix (*str)) |
| { |
| Rs = Rd; |
| str++; |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| } |
| else |
| { |
| if ((Rs = thumb_reg (&str, THUMB_REG_ANY)) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL) |
| { |
| /* Two operand format, shuffle the registers |
| and pretend there are 3. */ |
| Rn = Rs; |
| Rs = Rd; |
| } |
| else if (is_immediate_prefix (*str)) |
| { |
| str++; |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| } |
| else if ((Rn = thumb_reg (&str, THUMB_REG_ANY)) == FAIL) |
| return; |
| } |
| |
| /* We now have Rd and Rs set to registers, and Rn set to a register or FAIL; |
| for the latter case, EXPR contains the immediate that was found. */ |
| if (Rn != FAIL) |
| { |
| /* All register format. */ |
| if (Rd > 7 || Rs > 7 || Rn > 7) |
| { |
| if (Rs != Rd) |
| { |
| inst.error = _("dest and source1 must be the same register"); |
| return; |
| } |
| |
| /* Can't do this for SUB. */ |
| if (subtract) |
| { |
| inst.error = _("subtract valid only on lo regs"); |
| return; |
| } |
| |
| inst.instruction = (T_OPCODE_ADD_HI |
| | (Rd > 7 ? THUMB_H1 : 0) |
| | (Rn > 7 ? THUMB_H2 : 0)); |
| inst.instruction |= (Rd & 7) | ((Rn & 7) << 3); |
| } |
| else |
| { |
| inst.instruction = subtract ? T_OPCODE_SUB_R3 : T_OPCODE_ADD_R3; |
| inst.instruction |= Rd | (Rs << 3) | (Rn << 6); |
| } |
| } |
| else |
| { |
| /* Immediate expression, now things start to get nasty. */ |
| |
| /* First deal with HI regs, only very restricted cases allowed: |
| Adjusting SP, and using PC or SP to get an address. */ |
| if ((Rd > 7 && (Rd != REG_SP || Rs != REG_SP)) |
| || (Rs > 7 && Rs != REG_SP && Rs != REG_PC)) |
| { |
| inst.error = _("invalid Hi register with immediate"); |
| return; |
| } |
| |
| if (inst.reloc.exp.X_op != O_constant) |
| { |
| /* Value isn't known yet, all we can do is store all the fragments |
| we know about in the instruction and let the reloc hacking |
| work it all out. */ |
| inst.instruction = (subtract ? 0x8000 : 0) | (Rd << 4) | Rs; |
| inst.reloc.type = BFD_RELOC_ARM_THUMB_ADD; |
| } |
| else |
| { |
| int offset = inst.reloc.exp.X_add_number; |
| |
| if (subtract) |
| offset = - offset; |
| |
| if (offset < 0) |
| { |
| offset = - offset; |
| subtract = 1; |
| |
| /* Quick check, in case offset is MIN_INT. */ |
| if (offset < 0) |
| { |
| inst.error = _("immediate value out of range"); |
| return; |
| } |
| } |
| /* Note - you cannot convert a subtract of 0 into an |
| add of 0 because the carry flag is set differently. */ |
| else if (offset > 0) |
| subtract = 0; |
| |
| if (Rd == REG_SP) |
| { |
| if (offset & ~0x1fc) |
| { |
| inst.error = _("invalid immediate value for stack adjust"); |
| return; |
| } |
| inst.instruction = subtract ? T_OPCODE_SUB_ST : T_OPCODE_ADD_ST; |
| inst.instruction |= offset >> 2; |
| } |
| else if (Rs == REG_PC || Rs == REG_SP) |
| { |
| if (subtract |
| || (offset & ~0x3fc)) |
| { |
| inst.error = _("invalid immediate for address calculation"); |
| return; |
| } |
| inst.instruction = (Rs == REG_PC ? T_OPCODE_ADD_PC |
| : T_OPCODE_ADD_SP); |
| inst.instruction |= (Rd << 8) | (offset >> 2); |
| } |
| else if (Rs == Rd) |
| { |
| if (offset & ~0xff) |
| { |
| inst.error = _("immediate value out of range"); |
| return; |
| } |
| inst.instruction = subtract ? T_OPCODE_SUB_I8 : T_OPCODE_ADD_I8; |
| inst.instruction |= (Rd << 8) | offset; |
| } |
| else |
| { |
| if (offset & ~0x7) |
| { |
| inst.error = _("immediate value out of range"); |
| return; |
| } |
| inst.instruction = subtract ? T_OPCODE_SUB_I3 : T_OPCODE_ADD_I3; |
| inst.instruction |= Rd | (Rs << 3) | (offset << 6); |
| } |
| } |
| } |
| |
| end_of_line (str); |
| } |
| |
| static void |
| thumb_shift (str, shift) |
| char * str; |
| int shift; |
| { |
| int Rd, Rs, Rn = FAIL; |
| |
| skip_whitespace (str); |
| |
| if ((Rd = thumb_reg (&str, THUMB_REG_LO)) == FAIL |
| || skip_past_comma (&str) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (is_immediate_prefix (*str)) |
| { |
| /* Two operand immediate format, set Rs to Rd. */ |
| Rs = Rd; |
| str ++; |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| } |
| else |
| { |
| if ((Rs = thumb_reg (&str, THUMB_REG_LO)) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) == FAIL) |
| { |
| /* Two operand format, shuffle the registers |
| and pretend there are 3. */ |
| Rn = Rs; |
| Rs = Rd; |
| } |
| else if (is_immediate_prefix (*str)) |
| { |
| str++; |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| } |
| else if ((Rn = thumb_reg (&str, THUMB_REG_LO)) == FAIL) |
| return; |
| } |
| |
| /* We now have Rd and Rs set to registers, and Rn set to a register or FAIL; |
| for the latter case, EXPR contains the immediate that was found. */ |
| |
| if (Rn != FAIL) |
| { |
| if (Rs != Rd) |
| { |
| inst.error = _("source1 and dest must be same register"); |
| return; |
| } |
| |
| switch (shift) |
| { |
| case THUMB_ASR: inst.instruction = T_OPCODE_ASR_R; break; |
| case THUMB_LSL: inst.instruction = T_OPCODE_LSL_R; break; |
| case THUMB_LSR: inst.instruction = T_OPCODE_LSR_R; break; |
| } |
| |
| inst.instruction |= Rd | (Rn << 3); |
| } |
| else |
| { |
| switch (shift) |
| { |
| case THUMB_ASR: inst.instruction = T_OPCODE_ASR_I; break; |
| case THUMB_LSL: inst.instruction = T_OPCODE_LSL_I; break; |
| case THUMB_LSR: inst.instruction = T_OPCODE_LSR_I; break; |
| } |
| |
| if (inst.reloc.exp.X_op != O_constant) |
| { |
| /* Value isn't known yet, create a dummy reloc and let reloc |
| hacking fix it up. */ |
| inst.reloc.type = BFD_RELOC_ARM_THUMB_SHIFT; |
| } |
| else |
| { |
| unsigned shift_value = inst.reloc.exp.X_add_number; |
| |
| if (shift_value > 32 || (shift_value == 32 && shift == THUMB_LSL)) |
| { |
| inst.error = _("invalid immediate for shift"); |
| return; |
| } |
| |
| /* Shifts of zero are handled by converting to LSL. */ |
| if (shift_value == 0) |
| inst.instruction = T_OPCODE_LSL_I; |
| |
| /* Shifts of 32 are encoded as a shift of zero. */ |
| if (shift_value == 32) |
| shift_value = 0; |
| |
| inst.instruction |= shift_value << 6; |
| } |
| |
| inst.instruction |= Rd | (Rs << 3); |
| } |
| |
| end_of_line (str); |
| } |
| |
| static void |
| thumb_mov_compare (str, move) |
| char * str; |
| int move; |
| { |
| int Rd, Rs = FAIL; |
| |
| skip_whitespace (str); |
| |
| if ((Rd = thumb_reg (&str, THUMB_REG_ANY)) == FAIL |
| || skip_past_comma (&str) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (is_immediate_prefix (*str)) |
| { |
| str++; |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| } |
| else if ((Rs = thumb_reg (&str, THUMB_REG_ANY)) == FAIL) |
| return; |
| |
| if (Rs != FAIL) |
| { |
| if (Rs < 8 && Rd < 8) |
| { |
| if (move == THUMB_MOVE) |
| /* A move of two lowregs is encoded as ADD Rd, Rs, #0 |
| since a MOV instruction produces unpredictable results. */ |
| inst.instruction = T_OPCODE_ADD_I3; |
| else |
| inst.instruction = T_OPCODE_CMP_LR; |
| inst.instruction |= Rd | (Rs << 3); |
| } |
| else |
| { |
| if (move == THUMB_MOVE) |
| inst.instruction = T_OPCODE_MOV_HR; |
| else |
| inst.instruction = T_OPCODE_CMP_HR; |
| |
| if (Rd > 7) |
| inst.instruction |= THUMB_H1; |
| |
| if (Rs > 7) |
| inst.instruction |= THUMB_H2; |
| |
| inst.instruction |= (Rd & 7) | ((Rs & 7) << 3); |
| } |
| } |
| else |
| { |
| if (Rd > 7) |
| { |
| inst.error = _("only lo regs allowed with immediate"); |
| return; |
| } |
| |
| if (move == THUMB_MOVE) |
| inst.instruction = T_OPCODE_MOV_I8; |
| else |
| inst.instruction = T_OPCODE_CMP_I8; |
| |
| inst.instruction |= Rd << 8; |
| |
| if (inst.reloc.exp.X_op != O_constant) |
| inst.reloc.type = BFD_RELOC_ARM_THUMB_IMM; |
| else |
| { |
| unsigned value = inst.reloc.exp.X_add_number; |
| |
| if (value > 255) |
| { |
| inst.error = _("invalid immediate"); |
| return; |
| } |
| |
| inst.instruction |= value; |
| } |
| } |
| |
| end_of_line (str); |
| } |
| |
| static void |
| thumb_load_store (str, load_store, size) |
| char * str; |
| int load_store; |
| int size; |
| { |
| int Rd, Rb, Ro = FAIL; |
| |
| skip_whitespace (str); |
| |
| if ((Rd = thumb_reg (&str, THUMB_REG_LO)) == FAIL |
| || skip_past_comma (&str) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (*str == '[') |
| { |
| str++; |
| if ((Rb = thumb_reg (&str, THUMB_REG_ANY)) == FAIL) |
| return; |
| |
| if (skip_past_comma (&str) != FAIL) |
| { |
| if (is_immediate_prefix (*str)) |
| { |
| str++; |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| } |
| else if ((Ro = thumb_reg (&str, THUMB_REG_LO)) == FAIL) |
| return; |
| } |
| else |
| { |
| inst.reloc.exp.X_op = O_constant; |
| inst.reloc.exp.X_add_number = 0; |
| } |
| |
| if (*str != ']') |
| { |
| inst.error = _("expected ']'"); |
| return; |
| } |
| str++; |
| } |
| else if (*str == '=') |
| { |
| if (load_store != THUMB_LOAD) |
| { |
| inst.error = _("invalid pseudo operation"); |
| return; |
| } |
| |
| /* Parse an "ldr Rd, =expr" instruction; this is another pseudo op. */ |
| str++; |
| |
| skip_whitespace (str); |
| |
| if (my_get_expression (& inst.reloc.exp, & str)) |
| return; |
| |
| end_of_line (str); |
| |
| if ( inst.reloc.exp.X_op != O_constant |
| && inst.reloc.exp.X_op != O_symbol) |
| { |
| inst.error = "Constant expression expected"; |
| return; |
| } |
| |
| if (inst.reloc.exp.X_op == O_constant |
| && ((inst.reloc.exp.X_add_number & ~0xFF) == 0)) |
| { |
| /* This can be done with a mov instruction. */ |
| |
| inst.instruction = T_OPCODE_MOV_I8 | (Rd << 8); |
| inst.instruction |= inst.reloc.exp.X_add_number; |
| return; |
| } |
| |
| /* Insert into literal pool. */ |
| if (add_to_lit_pool () == FAIL) |
| { |
| if (!inst.error) |
| inst.error = "literal pool insertion failed"; |
| return; |
| } |
| |
| inst.reloc.type = BFD_RELOC_ARM_THUMB_OFFSET; |
| inst.reloc.pc_rel = 1; |
| inst.instruction = T_OPCODE_LDR_PC | (Rd << 8); |
| /* Adjust ARM pipeline offset to Thumb. */ |
| inst.reloc.exp.X_add_number += 4; |
| |
| return; |
| } |
| else |
| { |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| |
| inst.instruction = T_OPCODE_LDR_PC | (Rd << 8); |
| inst.reloc.pc_rel = 1; |
| inst.reloc.exp.X_add_number -= 4; /* Pipeline offset. */ |
| inst.reloc.type = BFD_RELOC_ARM_THUMB_OFFSET; |
| end_of_line (str); |
| return; |
| } |
| |
| if (Rb == REG_PC || Rb == REG_SP) |
| { |
| if (size != THUMB_WORD) |
| { |
| inst.error = _("byte or halfword not valid for base register"); |
| return; |
| } |
| else if (Rb == REG_PC && load_store != THUMB_LOAD) |
| { |
| inst.error = _("r15 based store not allowed"); |
| return; |
| } |
| else if (Ro != FAIL) |
| { |
| inst.error = _("invalid base register for register offset"); |
| return; |
| } |
| |
| if (Rb == REG_PC) |
| inst.instruction = T_OPCODE_LDR_PC; |
| else if (load_store == THUMB_LOAD) |
| inst.instruction = T_OPCODE_LDR_SP; |
| else |
| inst.instruction = T_OPCODE_STR_SP; |
| |
| inst.instruction |= Rd << 8; |
| if (inst.reloc.exp.X_op == O_constant) |
| { |
| unsigned offset = inst.reloc.exp.X_add_number; |
| |
| if (offset & ~0x3fc) |
| { |
| inst.error = _("invalid offset"); |
| return; |
| } |
| |
| inst.instruction |= offset >> 2; |
| } |
| else |
| inst.reloc.type = BFD_RELOC_ARM_THUMB_OFFSET; |
| } |
| else if (Rb > 7) |
| { |
| inst.error = _("invalid base register in load/store"); |
| return; |
| } |
| else if (Ro == FAIL) |
| { |
| /* Immediate offset. */ |
| if (size == THUMB_WORD) |
| inst.instruction = (load_store == THUMB_LOAD |
| ? T_OPCODE_LDR_IW : T_OPCODE_STR_IW); |
| else if (size == THUMB_HALFWORD) |
| inst.instruction = (load_store == THUMB_LOAD |
| ? T_OPCODE_LDR_IH : T_OPCODE_STR_IH); |
| else |
| inst.instruction = (load_store == THUMB_LOAD |
| ? T_OPCODE_LDR_IB : T_OPCODE_STR_IB); |
| |
| inst.instruction |= Rd | (Rb << 3); |
| |
| if (inst.reloc.exp.X_op == O_constant) |
| { |
| unsigned offset = inst.reloc.exp.X_add_number; |
| |
| if (offset & ~(0x1f << size)) |
| { |
| inst.error = _("invalid offset"); |
| return; |
| } |
| inst.instruction |= (offset >> size) << 6; |
| } |
| else |
| inst.reloc.type = BFD_RELOC_ARM_THUMB_OFFSET; |
| } |
| else |
| { |
| /* Register offset. */ |
| if (size == THUMB_WORD) |
| inst.instruction = (load_store == THUMB_LOAD |
| ? T_OPCODE_LDR_RW : T_OPCODE_STR_RW); |
| else if (size == THUMB_HALFWORD) |
| inst.instruction = (load_store == THUMB_LOAD |
| ? T_OPCODE_LDR_RH : T_OPCODE_STR_RH); |
| else |
| inst.instruction = (load_store == THUMB_LOAD |
| ? T_OPCODE_LDR_RB : T_OPCODE_STR_RB); |
| |
| inst.instruction |= Rd | (Rb << 3) | (Ro << 6); |
| } |
| |
| end_of_line (str); |
| } |
| |
| /* A register must be given at this point. |
| |
| Shift is the place to put it in inst.instruction. |
| |
| Restores input start point on err. |
| Returns the reg#, or FAIL. */ |
| |
| static int |
| mav_reg_required_here (str, shift, regtype) |
| char ** str; |
| int shift; |
| enum arm_reg_type regtype; |
| { |
| int reg; |
| char *start = *str; |
| |
| if ((reg = arm_reg_parse (str, all_reg_maps[regtype].htab)) != FAIL) |
| { |
| if (shift >= 0) |
| inst.instruction |= reg << shift; |
| |
| return reg; |
| } |
| |
| /* Restore the start point. */ |
| *str = start; |
| |
| /* In the few cases where we might be able to accept something else |
| this error can be overridden. */ |
| inst.error = _(all_reg_maps[regtype].expected); |
| |
| return FAIL; |
| } |
| |
| /* Cirrus Maverick Instructions. */ |
| |
| /* Wrapper functions. */ |
| |
| static void |
| do_mav_binops_1a (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_RN, REG_TYPE_MVF); |
| } |
| |
| static void |
| do_mav_binops_1b (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_RN, REG_TYPE_MVD); |
| } |
| |
| static void |
| do_mav_binops_1c (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_RN, REG_TYPE_MVDX); |
| } |
| |
| static void |
| do_mav_binops_1d (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVF, REG_TYPE_MVF); |
| } |
| |
| static void |
| do_mav_binops_1e (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVD, REG_TYPE_MVD); |
| } |
| |
| static void |
| do_mav_binops_1f (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVD, REG_TYPE_MVF); |
| } |
| |
| static void |
| do_mav_binops_1g (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVF, REG_TYPE_MVD); |
| } |
| |
| static void |
| do_mav_binops_1h (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVF, REG_TYPE_MVFX); |
| } |
| |
| static void |
| do_mav_binops_1i (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVD, REG_TYPE_MVFX); |
| } |
| |
| static void |
| do_mav_binops_1j (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVF, REG_TYPE_MVDX); |
| } |
| |
| static void |
| do_mav_binops_1k (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVD, REG_TYPE_MVDX); |
| } |
| |
| static void |
| do_mav_binops_1l (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVFX, REG_TYPE_MVF); |
| } |
| |
| static void |
| do_mav_binops_1m (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVFX, REG_TYPE_MVD); |
| } |
| |
| static void |
| do_mav_binops_1n (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVFX, REG_TYPE_MVFX); |
| } |
| |
| static void |
| do_mav_binops_1o (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE1, REG_TYPE_MVDX, REG_TYPE_MVDX); |
| } |
| |
| static void |
| do_mav_binops_2a (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE2, REG_TYPE_MVF, REG_TYPE_RN); |
| } |
| |
| static void |
| do_mav_binops_2b (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE2, REG_TYPE_MVD, REG_TYPE_RN); |
| } |
| |
| static void |
| do_mav_binops_2c (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE2, REG_TYPE_MVDX, REG_TYPE_RN); |
| } |
| |
| static void |
| do_mav_binops_3a (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE3, REG_TYPE_MVAX, REG_TYPE_MVFX); |
| } |
| |
| static void |
| do_mav_binops_3b (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE3, REG_TYPE_MVFX, REG_TYPE_MVAX); |
| } |
| |
| static void |
| do_mav_binops_3c (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE3, REG_TYPE_MVAX, REG_TYPE_MVDX); |
| } |
| |
| static void |
| do_mav_binops_3d (str) |
| char * str; |
| { |
| do_mav_binops (str, MAV_MODE3, REG_TYPE_MVDX, REG_TYPE_MVAX); |
| } |
| |
| static void |
| do_mav_triple_4a (str) |
| char * str; |
| { |
| do_mav_triple (str, MAV_MODE4, REG_TYPE_MVFX, REG_TYPE_MVFX, REG_TYPE_RN); |
| } |
| |
| static void |
| do_mav_triple_4b (str) |
| char * str; |
| { |
| do_mav_triple (str, MAV_MODE4, REG_TYPE_MVDX, REG_TYPE_MVDX, REG_TYPE_RN); |
| } |
| |
| static void |
| do_mav_triple_5a (str) |
| char * str; |
| { |
| do_mav_triple (str, MAV_MODE5, REG_TYPE_RN, REG_TYPE_MVF, REG_TYPE_MVF); |
| } |
| |
| static void |
| do_mav_triple_5b (str) |
| char * str; |
| { |
| do_mav_triple (str, MAV_MODE5, REG_TYPE_RN, REG_TYPE_MVD, REG_TYPE_MVD); |
| } |
| |
| static void |
| do_mav_triple_5c (str) |
| char * str; |
| { |
| do_mav_triple (str, MAV_MODE5, REG_TYPE_RN, REG_TYPE_MVFX, REG_TYPE_MVFX); |
| } |
| |
| static void |
| do_mav_triple_5d (str) |
| char * str; |
| { |
| do_mav_triple (str, MAV_MODE5, REG_TYPE_RN, REG_TYPE_MVDX, REG_TYPE_MVDX); |
| } |
| |
| static void |
| do_mav_triple_5e (str) |
| char * str; |
| { |
| do_mav_triple (str, MAV_MODE5, REG_TYPE_MVF, REG_TYPE_MVF, REG_TYPE_MVF); |
| } |
| |
| static void |
| do_mav_triple_5f (str) |
| char * str; |
| { |
| do_mav_triple (str, MAV_MODE5, REG_TYPE_MVD, REG_TYPE_MVD, REG_TYPE_MVD); |
| } |
| |
| static void |
| do_mav_triple_5g (str) |
| char * str; |
| { |
| do_mav_triple (str, MAV_MODE5, REG_TYPE_MVFX, REG_TYPE_MVFX, REG_TYPE_MVFX); |
| } |
| |
| static void |
| do_mav_triple_5h (str) |
| char * str; |
| { |
| do_mav_triple (str, MAV_MODE5, REG_TYPE_MVDX, REG_TYPE_MVDX, REG_TYPE_MVDX); |
| } |
| |
| static void |
| do_mav_quad_6a (str) |
| char * str; |
| { |
| do_mav_quad (str, MAV_MODE6, REG_TYPE_MVAX, REG_TYPE_MVFX, REG_TYPE_MVFX, |
| REG_TYPE_MVFX); |
| } |
| |
| static void |
| do_mav_quad_6b (str) |
| char * str; |
| { |
| do_mav_quad (str, MAV_MODE6, REG_TYPE_MVAX, REG_TYPE_MVAX, REG_TYPE_MVFX, |
| REG_TYPE_MVFX); |
| } |
| |
| /* cfmvsc32<cond> DSPSC,MVFX[15:0]. */ |
| static void |
| do_mav_dspsc_1 (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| /* cfmvsc32. */ |
| if (mav_reg_required_here (&str, -1, REG_TYPE_DSPSC) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || mav_reg_required_here (&str, 16, REG_TYPE_MVFX) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| |
| return; |
| } |
| |
| end_of_line (str); |
| } |
| |
| /* cfmv32sc<cond> MVFX[15:0],DSPSC. */ |
| static void |
| do_mav_dspsc_2 (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| /* cfmv32sc. */ |
| if (mav_reg_required_here (&str, 0, REG_TYPE_MVFX) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || mav_reg_required_here (&str, -1, REG_TYPE_DSPSC) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| |
| return; |
| } |
| |
| end_of_line (str); |
| } |
| |
| static void |
| do_mav_shift_1 (str) |
| char * str; |
| { |
| do_mav_shift (str, REG_TYPE_MVFX, REG_TYPE_MVFX); |
| } |
| |
| static void |
| do_mav_shift_2 (str) |
| char * str; |
| { |
| do_mav_shift (str, REG_TYPE_MVDX, REG_TYPE_MVDX); |
| } |
| |
| static void |
| do_mav_ldst_1 (str) |
| char * str; |
| { |
| do_mav_ldst (str, REG_TYPE_MVF); |
| } |
| |
| static void |
| do_mav_ldst_2 (str) |
| char * str; |
| { |
| do_mav_ldst (str, REG_TYPE_MVD); |
| } |
| |
| static void |
| do_mav_ldst_3 (str) |
| char * str; |
| { |
| do_mav_ldst (str, REG_TYPE_MVFX); |
| } |
| |
| static void |
| do_mav_ldst_4 (str) |
| char * str; |
| { |
| do_mav_ldst (str, REG_TYPE_MVDX); |
| } |
| |
| /* Isnsn like "foo X,Y". */ |
| |
| static void |
| do_mav_binops (str, mode, reg0, reg1) |
| char * str; |
| int mode; |
| enum arm_reg_type reg0; |
| enum arm_reg_type reg1; |
| { |
| int shift0, shift1; |
| |
| shift0 = mode & 0xff; |
| shift1 = (mode >> 8) & 0xff; |
| |
| skip_whitespace (str); |
| |
| if (mav_reg_required_here (&str, shift0, reg0) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || mav_reg_required_here (&str, shift1, reg1) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| } |
| else |
| end_of_line (str); |
| } |
| |
| /* Isnsn like "foo X,Y,Z". */ |
| |
| static void |
| do_mav_triple (str, mode, reg0, reg1, reg2) |
| char * str; |
| int mode; |
| enum arm_reg_type reg0; |
| enum arm_reg_type reg1; |
| enum arm_reg_type reg2; |
| { |
| int shift0, shift1, shift2; |
| |
| shift0 = mode & 0xff; |
| shift1 = (mode >> 8) & 0xff; |
| shift2 = (mode >> 16) & 0xff; |
| |
| skip_whitespace (str); |
| |
| if (mav_reg_required_here (&str, shift0, reg0) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || mav_reg_required_here (&str, shift1, reg1) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || mav_reg_required_here (&str, shift2, reg2) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| } |
| else |
| end_of_line (str); |
| } |
| |
| /* Isnsn like "foo W,X,Y,Z". |
| where W=MVAX[0:3] and X,Y,Z=MVFX[0:15]. */ |
| |
| static void |
| do_mav_quad (str, mode, reg0, reg1, reg2, reg3) |
| char * str; |
| int mode; |
| enum arm_reg_type reg0; |
| enum arm_reg_type reg1; |
| enum arm_reg_type reg2; |
| enum arm_reg_type reg3; |
| { |
| int shift0, shift1, shift2, shift3; |
| |
| shift0= mode & 0xff; |
| shift1 = (mode >> 8) & 0xff; |
| shift2 = (mode >> 16) & 0xff; |
| shift3 = (mode >> 24) & 0xff; |
| |
| skip_whitespace (str); |
| |
| if (mav_reg_required_here (&str, shift0, reg0) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || mav_reg_required_here (&str, shift1, reg1) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || mav_reg_required_here (&str, shift2, reg2) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || mav_reg_required_here (&str, shift3, reg3) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| } |
| else |
| end_of_line (str); |
| } |
| |
| /* Maverick shift immediate instructions. |
| cfsh32<cond> MVFX[15:0],MVFX[15:0],Shift[6:0]. |
| cfsh64<cond> MVDX[15:0],MVDX[15:0],Shift[6:0]. */ |
| |
| static void |
| do_mav_shift (str, reg0, reg1) |
| char * str; |
| enum arm_reg_type reg0; |
| enum arm_reg_type reg1; |
| { |
| int error; |
| int imm, neg = 0; |
| |
| skip_whitespace (str); |
| |
| error = 0; |
| |
| if (mav_reg_required_here (&str, 12, reg0) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || mav_reg_required_here (&str, 16, reg1) == FAIL |
| || skip_past_comma (&str) == FAIL) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| /* Calculate the immediate operand. |
| The operand is a 7bit signed number. */ |
| skip_whitespace (str); |
| |
| if (*str == '#') |
| ++str; |
| |
| if (!ISDIGIT (*str) && *str != '-') |
| { |
| inst.error = _("expecting immediate, 7bit operand"); |
| return; |
| } |
| |
| if (*str == '-') |
| { |
| neg = 1; |
| ++str; |
| } |
| |
| for (imm = 0; *str && ISDIGIT (*str); ++str) |
| imm = imm * 10 + *str - '0'; |
| |
| if (imm > 64) |
| { |
| inst.error = _("immediate out of range"); |
| return; |
| } |
| |
| /* Make negative imm's into 7bit signed numbers. */ |
| if (neg) |
| { |
| imm = -imm; |
| imm &= 0x0000007f; |
| } |
| |
| /* Bits 0-3 of the insn should have bits 0-3 of the immediate. |
| Bits 5-7 of the insn should have bits 4-6 of the immediate. |
| Bit 4 should be 0. */ |
| imm = (imm & 0xf) | ((imm & 0x70) << 1); |
| |
| inst.instruction |= imm; |
| end_of_line (str); |
| } |
| |
| static int |
| mav_parse_offset (str, negative) |
| char ** str; |
| int *negative; |
| { |
| char * p = *str; |
| int offset; |
| |
| *negative = 0; |
| |
| skip_whitespace (p); |
| |
| if (*p == '#') |
| ++p; |
| |
| if (*p == '-') |
| { |
| *negative = 1; |
| ++p; |
| } |
| |
| if (!ISDIGIT (*p)) |
| { |
| inst.error = _("offset expected"); |
| return 0; |
| } |
| |
| for (offset = 0; *p && ISDIGIT (*p); ++p) |
| offset = offset * 10 + *p - '0'; |
| |
| if (offset > 0xff) |
| { |
| inst.error = _("offset out of range"); |
| return 0; |
| } |
| |
| *str = p; |
| |
| return *negative ? -offset : offset; |
| } |
| |
| /* Maverick load/store instructions. |
| <insn><cond> CRd,[Rn,<offset>]{!}. |
| <insn><cond> CRd,[Rn],<offset>. */ |
| |
| static void |
| do_mav_ldst (str, reg0) |
| char * str; |
| enum arm_reg_type reg0; |
| { |
| int offset, negative; |
| |
| skip_whitespace (str); |
| |
| if (mav_reg_required_here (&str, 12, reg0) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || *str++ != '[' |
| || reg_required_here (&str, 16) == FAIL) |
| goto fail_ldst; |
| |
| if (skip_past_comma (&str) == SUCCESS) |
| { |
| /* You are here: "<offset>]{!}". */ |
| inst.instruction |= PRE_INDEX; |
| |
| offset = mav_parse_offset (&str, &negative); |
| |
| if (inst.error) |
| return; |
| |
| if (*str++ != ']') |
| { |
| inst.error = _("missing ]"); |
| return; |
| } |
| |
| if (*str == '!') |
| { |
| inst.instruction |= WRITE_BACK; |
| ++str; |
| } |
| } |
| else |
| { |
| /* You are here: "], <offset>". */ |
| if (*str++ != ']') |
| { |
| inst.error = _("missing ]"); |
| return; |
| } |
| |
| if (skip_past_comma (&str) == FAIL |
| || (offset = mav_parse_offset (&str, &negative), inst.error)) |
| goto fail_ldst; |
| |
| inst.instruction |= CP_T_WB; /* Post indexed, set bit W. */ |
| } |
| |
| if (negative) |
| offset = -offset; |
| else |
| inst.instruction |= CP_T_UD; /* Postive, so set bit U. */ |
| |
| inst.instruction |= offset >> 2; |
| end_of_line (str); |
| return; |
| |
| fail_ldst: |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| static void |
| do_t_nop (str) |
| char * str; |
| { |
| /* Do nothing. */ |
| end_of_line (str); |
| return; |
| } |
| |
| /* Handle the Format 4 instructions that do not have equivalents in other |
| formats. That is, ADC, AND, EOR, SBC, ROR, TST, NEG, CMN, ORR, MUL, |
| BIC and MVN. */ |
| |
| static void |
| do_t_arit (str) |
| char * str; |
| { |
| int Rd, Rs, Rn; |
| |
| skip_whitespace (str); |
| |
| if ((Rd = thumb_reg (&str, THUMB_REG_LO)) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || (Rs = thumb_reg (&str, THUMB_REG_LO)) == FAIL) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (skip_past_comma (&str) != FAIL) |
| { |
| /* Three operand format not allowed for TST, CMN, NEG and MVN. |
| (It isn't allowed for CMP either, but that isn't handled by this |
| function.) */ |
| if (inst.instruction == T_OPCODE_TST |
| || inst.instruction == T_OPCODE_CMN |
| || inst.instruction == T_OPCODE_NEG |
| || inst.instruction == T_OPCODE_MVN) |
| { |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if ((Rn = thumb_reg (&str, THUMB_REG_LO)) == FAIL) |
| return; |
| |
| if (Rs != Rd) |
| { |
| inst.error = _("dest and source1 must be the same register"); |
| return; |
| } |
| Rs = Rn; |
| } |
| |
| if (inst.instruction == T_OPCODE_MUL |
| && Rs == Rd) |
| as_tsktsk (_("Rs and Rd must be different in MUL")); |
| |
| inst.instruction |= Rd | (Rs << 3); |
| end_of_line (str); |
| } |
| |
| static void |
| do_t_add (str) |
| char * str; |
| { |
| thumb_add_sub (str, 0); |
| } |
| |
| static void |
| do_t_asr (str) |
| char * str; |
| { |
| thumb_shift (str, THUMB_ASR); |
| } |
| |
| static void |
| do_t_branch9 (str) |
| char * str; |
| { |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| inst.reloc.type = BFD_RELOC_THUMB_PCREL_BRANCH9; |
| inst.reloc.pc_rel = 1; |
| end_of_line (str); |
| } |
| |
| static void |
| do_t_branch12 (str) |
| char * str; |
| { |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| inst.reloc.type = BFD_RELOC_THUMB_PCREL_BRANCH12; |
| inst.reloc.pc_rel = 1; |
| end_of_line (str); |
| } |
| |
| /* Find the real, Thumb encoded start of a Thumb function. */ |
| |
| static symbolS * |
| find_real_start (symbolP) |
| symbolS * symbolP; |
| { |
| char * real_start; |
| const char * name = S_GET_NAME (symbolP); |
| symbolS * new_target; |
| |
| /* This definiton must agree with the one in gcc/config/arm/thumb.c. */ |
| #define STUB_NAME ".real_start_of" |
| |
| if (name == NULL) |
| abort (); |
| |
| /* Names that start with '.' are local labels, not function entry points. |
| The compiler may generate BL instructions to these labels because it |
| needs to perform a branch to a far away location. */ |
| if (name[0] == '.') |
| return symbolP; |
| |
| real_start = malloc (strlen (name) + strlen (STUB_NAME) + 1); |
| sprintf (real_start, "%s%s", STUB_NAME, name); |
| |
| new_target = symbol_find (real_start); |
| |
| if (new_target == NULL) |
| { |
| as_warn ("Failed to find real start of function: %s\n", name); |
| new_target = symbolP; |
| } |
| |
| free (real_start); |
| |
| return new_target; |
| } |
| |
| static void |
| do_t_branch23 (str) |
| char * str; |
| { |
| if (my_get_expression (& inst.reloc.exp, & str)) |
| return; |
| |
| inst.reloc.type = BFD_RELOC_THUMB_PCREL_BRANCH23; |
| inst.reloc.pc_rel = 1; |
| end_of_line (str); |
| |
| /* If the destination of the branch is a defined symbol which does not have |
| the THUMB_FUNC attribute, then we must be calling a function which has |
| the (interfacearm) attribute. We look for the Thumb entry point to that |
| function and change the branch to refer to that function instead. */ |
| if ( inst.reloc.exp.X_op == O_symbol |
| && inst.reloc.exp.X_add_symbol != NULL |
| && S_IS_DEFINED (inst.reloc.exp.X_add_symbol) |
| && ! THUMB_IS_FUNC (inst.reloc.exp.X_add_symbol)) |
| inst.reloc.exp.X_add_symbol = |
| find_real_start (inst.reloc.exp.X_add_symbol); |
| } |
| |
| static void |
| do_t_bx (str) |
| char * str; |
| { |
| int reg; |
| |
| skip_whitespace (str); |
| |
| if ((reg = thumb_reg (&str, THUMB_REG_ANY)) == FAIL) |
| return; |
| |
| /* This sets THUMB_H2 from the top bit of reg. */ |
| inst.instruction |= reg << 3; |
| |
| /* ??? FIXME: Should add a hacky reloc here if reg is REG_PC. The reloc |
| should cause the alignment to be checked once it is known. This is |
| because BX PC only works if the instruction is word aligned. */ |
| |
| end_of_line (str); |
| } |
| |
| static void |
| do_t_compare (str) |
| char * str; |
| { |
| thumb_mov_compare (str, THUMB_COMPARE); |
| } |
| |
| static void |
| do_t_ldmstm (str) |
| char * str; |
| { |
| int Rb; |
| long range; |
| |
| skip_whitespace (str); |
| |
| if ((Rb = thumb_reg (&str, THUMB_REG_LO)) == FAIL) |
| return; |
| |
| if (*str != '!') |
| as_warn (_("inserted missing '!': load/store multiple always writes back base register")); |
| else |
| str++; |
| |
| if (skip_past_comma (&str) == FAIL |
| || (range = reg_list (&str)) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (inst.reloc.type != BFD_RELOC_NONE) |
| { |
| /* This really doesn't seem worth it. */ |
| inst.reloc.type = BFD_RELOC_NONE; |
| inst.error = _("expression too complex"); |
| return; |
| } |
| |
| if (range & ~0xff) |
| { |
| inst.error = _("only lo-regs valid in load/store multiple"); |
| return; |
| } |
| |
| inst.instruction |= (Rb << 8) | range; |
| end_of_line (str); |
| } |
| |
| static void |
| do_t_ldr (str) |
| char * str; |
| { |
| thumb_load_store (str, THUMB_LOAD, THUMB_WORD); |
| } |
| |
| static void |
| do_t_ldrb (str) |
| char * str; |
| { |
| thumb_load_store (str, THUMB_LOAD, THUMB_BYTE); |
| } |
| |
| static void |
| do_t_ldrh (str) |
| char * str; |
| { |
| thumb_load_store (str, THUMB_LOAD, THUMB_HALFWORD); |
| } |
| |
| static void |
| do_t_lds (str) |
| char * str; |
| { |
| int Rd, Rb, Ro; |
| |
| skip_whitespace (str); |
| |
| if ((Rd = thumb_reg (&str, THUMB_REG_LO)) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || *str++ != '[' |
| || (Rb = thumb_reg (&str, THUMB_REG_LO)) == FAIL |
| || skip_past_comma (&str) == FAIL |
| || (Ro = thumb_reg (&str, THUMB_REG_LO)) == FAIL |
| || *str++ != ']') |
| { |
| if (! inst.error) |
| inst.error = _("syntax: ldrs[b] Rd, [Rb, Ro]"); |
| return; |
| } |
| |
| inst.instruction |= Rd | (Rb << 3) | (Ro << 6); |
| end_of_line (str); |
| } |
| |
| static void |
| do_t_lsl (str) |
| char * str; |
| { |
| thumb_shift (str, THUMB_LSL); |
| } |
| |
| static void |
| do_t_lsr (str) |
| char * str; |
| { |
| thumb_shift (str, THUMB_LSR); |
| } |
| |
| static void |
| do_t_mov (str) |
| char * str; |
| { |
| thumb_mov_compare (str, THUMB_MOVE); |
| } |
| |
| static void |
| do_t_push_pop (str) |
| char * str; |
| { |
| long range; |
| |
| skip_whitespace (str); |
| |
| if ((range = reg_list (&str)) == FAIL) |
| { |
| if (! inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| if (inst.reloc.type != BFD_RELOC_NONE) |
| { |
| /* This really doesn't seem worth it. */ |
| inst.reloc.type = BFD_RELOC_NONE; |
| inst.error = _("expression too complex"); |
| return; |
| } |
| |
| if (range & ~0xff) |
| { |
| if ((inst.instruction == T_OPCODE_PUSH |
| && (range & ~0xff) == 1 << REG_LR) |
| || (inst.instruction == T_OPCODE_POP |
| && (range & ~0xff) == 1 << REG_PC)) |
| { |
| inst.instruction |= THUMB_PP_PC_LR; |
| range &= 0xff; |
| } |
| else |
| { |
| inst.error = _("invalid register list to push/pop instruction"); |
| return; |
| } |
| } |
| |
| inst.instruction |= range; |
| end_of_line (str); |
| } |
| |
| static void |
| do_t_str (str) |
| char * str; |
| { |
| thumb_load_store (str, THUMB_STORE, THUMB_WORD); |
| } |
| |
| static void |
| do_t_strb (str) |
| char * str; |
| { |
| thumb_load_store (str, THUMB_STORE, THUMB_BYTE); |
| } |
| |
| static void |
| do_t_strh (str) |
| char * str; |
| { |
| thumb_load_store (str, THUMB_STORE, THUMB_HALFWORD); |
| } |
| |
| static void |
| do_t_sub (str) |
| char * str; |
| { |
| thumb_add_sub (str, 1); |
| } |
| |
| static void |
| do_t_swi (str) |
| char * str; |
| { |
| skip_whitespace (str); |
| |
| if (my_get_expression (&inst.reloc.exp, &str)) |
| return; |
| |
| inst.reloc.type = BFD_RELOC_ARM_SWI; |
| end_of_line (str); |
| return; |
| } |
| |
| static void |
| do_t_adr (str) |
| char * str; |
| { |
| int reg; |
| |
| /* This is a pseudo-op of the form "adr rd, label" to be converted |
| into a relative address of the form "add rd, pc, #label-.-4". */ |
| skip_whitespace (str); |
| |
| /* Store Rd in temporary location inside instruction. */ |
| if ((reg = reg_required_here (&str, 4)) == FAIL |
| || (reg > 7) /* For Thumb reg must be r0..r7. */ |
| || skip_past_comma (&str) == FAIL |
| || my_get_expression (&inst.reloc.exp, &str)) |
| { |
| if (!inst.error) |
| inst.error = BAD_ARGS; |
| return; |
| } |
| |
| inst.reloc.type = BFD_RELOC_ARM_THUMB_ADD; |
| inst.reloc.exp.X_add_number -= 4; /* PC relative adjust. */ |
| inst.reloc.pc_rel = 1; |
| inst.instruction |= REG_PC; /* Rd is already placed into the instruction. */ |
| |
| end_of_line (str); |
| } |
| |
| static void |
| insert_reg (r, htab) |
| const struct reg_entry *r; |
| struct hash_control *htab; |
| { |
| int len = strlen (r->name) + 2; |
| char * buf = (char *) xmalloc (len); |
| char * buf2 = (char *) xmalloc (len); |
| int i = 0; |
| |
| #ifdef REGISTER_PREFIX |
| buf[i++] = REGISTER_PREFIX; |
| #endif |
| |
| strcpy (buf + i, r->name); |
| |
| for (i = 0; buf[i]; i++) |
| buf2[i] = TOUPPER (buf[i]); |
| |
| buf2[i] = '\0'; |
| |
| hash_insert (htab, buf, (PTR) r); |
| hash_insert (htab, buf2, (PTR) r); |
| } |
| |
| static void |
| build_reg_hsh (map) |
| struct reg_map *map; |
| { |
| const struct reg_entry *r; |
| |
| if ((map->htab = hash_new ()) == NULL) |
| as_fatal (_("virtual memory exhausted")); |
| |
| for (r = map->names; r->name != NULL; r++) |
| insert_reg (r, map->htab); |
| } |
| |
| static void |
| insert_reg_alias (str, regnum, htab) |
| char *str; |
| int regnum; |
| struct hash_control *htab; |
| { |
| struct reg_entry *new = |
| (struct reg_entry *) xmalloc (sizeof (struct reg_entry)); |
| char *name = xmalloc (strlen (str) + 1); |
| strcpy (name, str); |
| |
| new->name = name; |
| new->number = regnum; |
| |
| hash_insert (htab, name, (PTR) new); |
| } |
| |
| /* Look for the .req directive. This is of the form: |
| |
| newname .req existing_name |
| |
| If we find one, or if it looks sufficiently like one that we want to |
| handle any error here, return non-zero. Otherwise return zero. */ |
| static int |
| create_register_alias (newname, p) |
| char *newname; |
| char *p; |
| { |
| char *q; |
| char c; |
| |
| q = p; |
| skip_whitespace (q); |
| |
| c = *p; |
| *p = '\0'; |
| |
| if (*q && !strncmp (q, ".req ", 5)) |
| { |
| char *copy_of_str; |
| char *r; |
| |
| #ifdef IGNORE_OPCODE_CASE |
| newname = original_case_string; |
| #endif |
| copy_of_str = newname; |
| |
| q += 4; |
| skip_whitespace (q); |
| |
| for (r = q; *r != '\0'; r++) |
| if (*r == ' ') |
| break; |
| |
| if (r != q) |
| { |
| enum arm_reg_type new_type, old_type; |
| int old_regno; |
| char d = *r; |
| |
| *r = '\0'; |
| old_type = arm_reg_parse_any (q); |
| *r = d; |
| |
| new_type = arm_reg_parse_any (newname); |
| |
| if (new_type == REG_TYPE_MAX) |
| { |
| if (old_type != REG_TYPE_MAX) |
| { |
| old_regno = arm_reg_parse (&q, all_reg_maps[old_type].htab); |
| insert_reg_alias (newname, old_regno, |
| all_reg_maps[old_type].htab); |
| } |
| else |
| as_warn (_("register '%s' does not exist\n"), q); |
| } |
| else if (old_type == REG_TYPE_MAX) |
| { |
| as_warn (_("ignoring redefinition of register alias '%s' to non-existant register '%s'"), |
| copy_of_str, q); |
| } |
| else |
| { |
| /* Do not warn about redefinitions to the same alias. */ |
| if (new_type != old_type |
| || (arm_reg_parse (&q, all_reg_maps[old_type].htab) |
| != arm_reg_parse (&q, all_reg_maps[new_type].htab))) |
| as_warn (_("ignoring redefinition of register alias '%s'"), |
| copy_of_str); |
| |
| } |
| } |
| else |
| as_warn (_("ignoring incomplete .req pseuso op")); |
| |
| *p = c; |
| return 1; |
| } |
| *p = c; |
| return 0; |
| } |
| |
| static void |
| set_constant_flonums () |
| { |
| int i; |
| |
| for (i = 0; i < NUM_FLOAT_VALS; i++) |
| if (atof_ieee ((char *) fp_const[i], 'x', fp_values[i]) == NULL) |
| abort (); |
| } |
| |
| /* Iterate over the base tables to create the instruction patterns. */ |
| static void |
| build_arm_ops_hsh () |
| { |
| unsigned int i; |
| unsigned int j; |
| static struct obstack insn_obstack; |
| |
| obstack_begin (&insn_obstack, 4000); |
| |
| for (i = 0; i < sizeof (insns) / sizeof (struct asm_opcode); i++) |
| { |
| const struct asm_opcode *insn = insns + i; |
| |
| if (insn->cond_offset != 0) |
| { |
| /* Insn supports conditional execution. Build the varaints |
| and insert them in the hash table. */ |
| for (j = 0; j < sizeof (conds) / sizeof (struct asm_cond); j++) |
| { |
| unsigned len = strlen (insn->template); |
| struct asm_opcode *new; |
| char *template; |
| |
| new = obstack_alloc (&insn_obstack, sizeof (struct asm_opcode)); |
| /* All condition codes are two characters. */ |
| template = obstack_alloc (&insn_obstack, len + 3); |
| |
| strncpy (template, insn->template, insn->cond_offset); |
| strcpy (template + insn->cond_offset, conds[j].template); |
| if (len > insn->cond_offset) |
| strcpy (template + insn->cond_offset + 2, |
| insn->template + insn->cond_offset); |
| new->template = template; |
| new->cond_offset = 0; |
| new->variant = insn->variant; |
| new->parms = insn->parms; |
| new->value = (insn->value & ~COND_MASK) | conds[j].value; |
| |
| hash_insert (arm_ops_hsh, new->template, (PTR) new); |
| } |
| } |
| /* Finally, insert the unconditional insn in the table directly; |
| no need to build a copy. */ |
| hash_insert (arm_ops_hsh, insn->template, (PTR) insn); |
| } |
| } |
| |
| void |
| md_begin () |
| { |
| unsigned mach; |
| unsigned int i; |
| |
| if ( (arm_ops_hsh = hash_new ()) == NULL |
| || (arm_tops_hsh = hash_new ()) == NULL |
| || (arm_cond_hsh = hash_new ()) == NULL |
| || (arm_shift_hsh = hash_new ()) == NULL |
| || (arm_psr_hsh = hash_new ()) == NULL) |
| as_fatal (_("virtual memory exhausted")); |
| |
| build_arm_ops_hsh (); |
| for (i = 0; i < sizeof (tinsns) / sizeof (struct thumb_opcode); i++) |
| hash_insert (arm_tops_hsh, tinsns[i].template, (PTR) (tinsns + i)); |
| for (i = 0; i < sizeof (conds) / sizeof (struct asm_cond); i++) |
| hash_insert (arm_cond_hsh, conds[i].template, (PTR) (conds + i)); |
| for (i = 0; i < sizeof (shift_names) / sizeof (struct asm_shift_name); i++) |
| hash_insert (arm_shift_hsh, shift_names[i].name, (PTR) (shift_names + i)); |
| for (i = 0; i < sizeof (psrs) / sizeof (struct asm_psr); i++) |
| hash_insert (arm_psr_hsh, psrs[i].template, (PTR) (psrs + i)); |
| |
| for (i = (int) REG_TYPE_FIRST; i < (int) REG_TYPE_MAX; i++) |
| build_reg_hsh (all_reg_maps + i); |
| |
| set_constant_flonums (); |
| |
| /* Set the cpu variant based on the command-line options. We prefer |
| -mcpu= over -march= if both are set (as for GCC); and we prefer |
| -mfpu= over any other way of setting the floating point unit. |
| Use of legacy options with new options are faulted. */ |
| if (legacy_cpu != -1) |
| { |
| if (mcpu_cpu_opt != -1 || march_cpu_opt != -1) |
| as_bad (_("use of old and new-style options to set CPU type")); |
| |
| mcpu_cpu_opt = legacy_cpu; |
| } |
| else if (mcpu_cpu_opt == -1) |
| mcpu_cpu_opt = march_cpu_opt; |
| |
| if (legacy_fpu != -1) |
| { |
| if (mfpu_opt != -1) |
| as_bad (_("use of old and new-style options to set FPU type")); |
| |
| mfpu_opt = legacy_fpu; |
| } |
| else if (mfpu_opt == -1) |
| { |
| if (mcpu_fpu_opt != -1) |
| mfpu_opt = mcpu_fpu_opt; |
| else |
| mfpu_opt = march_fpu_opt; |
| } |
| |
| if (mfpu_opt == -1) |
| { |
| if (mcpu_cpu_opt == -1) |
| mfpu_opt = FPU_DEFAULT; |
| else if (mcpu_cpu_opt & ARM_EXT_V5) |
| mfpu_opt = FPU_ARCH_VFP_V2; |
| else |
| mfpu_opt = FPU_ARCH_FPA; |
| } |
| |
| if (mcpu_cpu_opt == -1) |
| mcpu_cpu_opt = CPU_DEFAULT; |
| |
| cpu_variant = mcpu_cpu_opt | mfpu_opt; |
| |
| #if defined OBJ_COFF || defined OBJ_ELF |
| { |
| unsigned int flags = 0; |
| |
| /* Set the flags in the private structure. */ |
| if (uses_apcs_26) flags |= F_APCS26; |
| if (support_interwork) flags |= F_INTERWORK; |
| if (uses_apcs_float) flags |= F_APCS_FLOAT; |
| if (pic_code) flags |= F_PIC; |
| if ((cpu_variant & FPU_ANY) == FPU_NONE |
| || (cpu_variant & FPU_ANY) == FPU_ARCH_VFP) /* VFP layout only. */ |
| flags |= F_SOFT_FLOAT; |
| /* Using VFP conventions (even if soft-float). */ |
| if (cpu_variant & FPU_VFP_EXT_NONE) flags |= F_VFP_FLOAT; |
| |
| |
| bfd_set_private_flags (stdoutput, flags); |
| |
| /* We have run out flags in the COFF header to encode the |
| status of ATPCS support, so instead we create a dummy, |
| empty, debug section called .arm.atpcs. */ |
| if (atpcs) |
| { |
| asection * sec; |
| |
| sec = bfd_make_section (stdoutput, ".arm.atpcs"); |
| |
| if (sec != NULL) |
| { |
| bfd_set_section_flags |
| (stdoutput, sec, SEC_READONLY | SEC_DEBUGGING /* | SEC_HAS_CONTENTS */); |
| bfd_set_section_size (stdoutput, sec, 0); |
| bfd_set_section_contents (stdoutput, sec, NULL, 0, 0); |
| } |
| } |
| } |
| #endif |
| |
| /* Record the CPU type as well. */ |
| switch (cpu_variant & ARM_CPU_MASK) |
| { |
| case ARM_2: |
| mach = bfd_mach_arm_2; |
| break; |
| |
| case ARM_3: /* Also ARM_250. */ |
| mach = bfd_mach_arm_2a; |
| break; |
| |
| case ARM_6: /* Also ARM_7. */ |
| mach = bfd_mach_arm_3; |
| break; |
| |
| default: |
| mach = bfd_mach_arm_4; |
| break; |
| } |
| |
| /* Catch special cases. */ |
| if (cpu_variant & ARM_CEXT_XSCALE) |
| mach = bfd_mach_arm_XScale; |
| else if (cpu_variant & ARM_EXT_V5E) |
| mach = bfd_mach_arm_5TE; |
| else if (cpu_variant & ARM_EXT_V5) |
| { |
| if (cpu_variant & ARM_EXT_V4T) |
| mach = bfd_mach_arm_5T; |
| else |
| mach = bfd_mach_arm_5; |
| } |
| else if (cpu_variant & ARM_EXT_V4) |
| { |
| if (cpu_variant & ARM_EXT_V4T) |
| mach = bfd_mach_arm_4T; |
| else |
| mach = bfd_mach_arm_4; |
| } |
| else if (cpu_variant & ARM_EXT_V3M) |
| mach = bfd_mach_arm_3M; |
| |
| bfd_set_arch_mach (stdoutput, TARGET_ARCH, mach); |
| } |
| |
| /* Turn an integer of n bytes (in val) into a stream of bytes appropriate |
| for use in the a.out file, and stores them in the array pointed to by buf. |
| This knows about the endian-ness of the target machine and does |
| THE RIGHT THING, whatever it is. Possible values for n are 1 (byte) |
| 2 (short) and 4 (long) Floating numbers are put out as a series of |
| LITTLENUMS (shorts, here at least). */ |
| |
| void |
| md_number_to_chars (buf, val, n) |
| char * buf; |
| valueT val; |
| int n; |
| { |
| if (target_big_endian) |
| number_to_chars_bigendian (buf, val, n); |
| else |
| number_to_chars_littleendian (buf, val, n); |
| } |
| |
| static valueT |
| md_chars_to_number (buf, n) |
| char * buf; |
| int n; |
| { |
| valueT result = 0; |
| unsigned char * where = (unsigned char *) buf; |
| |
| if (target_big_endian) |
| { |
| while (n--) |
| { |
| result <<= 8; |
| result |= (*where++ & 255); |
| } |
| } |
| else |
| { |
| while (n--) |
| { |
| result <<= 8; |
| result |= (where[n] & 255); |
| } |
| } |
| |
| return result; |
| } |
| |
| /* Turn a string in input_line_pointer into a floating point constant |
| of type TYPE, and store the appropriate bytes in *LITP. The number |
| of LITTLENUMS emitted is stored in *SIZEP. An error message is |
| returned, or NULL on OK. |
| |
| Note that fp constants aren't represent in the normal way on the ARM. |
| In big endian mode, things are as expected. However, in little endian |
| mode fp constants are big-endian word-wise, and little-endian byte-wise |
| within the words. For example, (double) 1.1 in big endian mode is |
| the byte sequence 3f f1 99 99 99 99 99 9a, and in little endian mode is |
| the byte sequence 99 99 f1 3f 9a 99 99 99. |
| |
| ??? The format of 12 byte floats is uncertain according to gcc's arm.h. */ |
| |
| char * |
| md_atof (type, litP, sizeP) |
| char type; |
| char * litP; |
| int * sizeP; |
| { |
| int prec; |
| LITTLENUM_TYPE words[MAX_LITTLENUMS]; |
| char *t; |
| int i; |
| |
| switch (type) |
| { |
| case 'f': |
| case 'F': |
| case 's': |
| case 'S': |
| prec = 2; |
| break; |
| |
| case 'd': |
| case 'D': |
| case 'r': |
| case 'R': |
| prec = 4; |
| break; |
| |
| case 'x': |
| case 'X': |
| prec = 6; |
| break; |
| |
| case 'p': |
| case 'P': |
| prec = 6; |
| break; |
| |
| default: |
| *sizeP = 0; |
| return _("bad call to MD_ATOF()"); |
| } |
| |
| t = atof_ieee (input_line_pointer, type, words); |
| if (t) |
| input_line_pointer = t; |
| *sizeP = prec * 2; |
| |
| if (target_big_endian) |
| { |
| for (i = 0; i < prec; i++) |
| { |
| md_number_to_chars (litP, (valueT) words[i], 2); |
| litP += 2; |
| } |
| } |
| else |
| { |
| if (cpu_variant & FPU_ARCH_VFP) |
| for (i = prec - 1; i >= 0; i--) |
| { |
| md_number_to_chars (litP, (valueT) words[i], 2); |
| litP += 2; |
| } |
| else |
| /* For a 4 byte float the order of elements in `words' is 1 0. |
| For an 8 byte float the order is 1 0 3 2. */ |
| for (i = 0; i < prec; i += 2) |
| { |
| md_number_to_chars (litP, (valueT) words[i + 1], 2); |
| md_number_to_chars (litP + 2, (valueT) words[i], 2); |
| litP += 4; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* The knowledge of the PC's pipeline offset is built into the insns |
| themselves. */ |
| |
| long |
| md_pcrel_from (fixP) |
| fixS * fixP; |
| { |
| if (fixP->fx_addsy |
| && S_GET_SEGMENT (fixP->fx_addsy) == undefined_section |
| && fixP->fx_subsy == NULL) |
| return 0; |
| |
| if (fixP->fx_pcrel && (fixP->fx_r_type == BFD_RELOC_ARM_THUMB_ADD)) |
| { |
| /* PC relative addressing on the Thumb is slightly odd |
| as the bottom two bits of the PC are forced to zero |
| for the calculation. */ |
| return (fixP->fx_where + fixP->fx_frag->fr_address) & ~3; |
| } |
| |
| #ifdef TE_WINCE |
| /* The pattern was adjusted to accomodate CE's off-by-one fixups, |
| so we un-adjust here to compensate for the accomodation. */ |
| return fixP->fx_where + fixP->fx_frag->fr_address + 8; |
| #else |
| return fixP->fx_where + fixP->fx_frag->fr_address; |
| #endif |
| } |
| |
| /* Round up a section size to the appropriate boundary. */ |
| |
| valueT |
| md_section_align (segment, size) |
| segT segment ATTRIBUTE_UNUSED; |
| valueT size; |
| { |
| #ifdef OBJ_ELF |
| return size; |
| #else |
| /* Round all sects to multiple of 4. */ |
| return (size + 3) & ~3; |
| #endif |
| } |
| |
| /* Under ELF we need to default _GLOBAL_OFFSET_TABLE. |
| Otherwise we have no need to default values of symbols. */ |
| |
| symbolS * |
| md_undefined_symbol (name) |
| char * name ATTRIBUTE_UNUSED; |
| { |
| #ifdef OBJ_ELF |
| if (name[0] == '_' && name[1] == 'G' |
| && streq (name, GLOBAL_OFFSET_TABLE_NAME)) |
| { |
| if (!GOT_symbol) |
| { |
| if (symbol_find (name)) |
| as_bad ("GOT already in the symbol table"); |
| |
| GOT_symbol = symbol_new (name, undefined_section, |
| (valueT) 0, & zero_address_frag); |
| } |
| |
| return GOT_symbol; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| /* arm_reg_parse () := if it looks like a register, return its token and |
| advance the pointer. */ |
| |
| static int |
| arm_reg_parse (ccp, htab) |
| register char ** ccp; |
| struct hash_control *htab; |
| { |
| char * start = * ccp; |
| char c; |
| char * p; |
| struct reg_entry * reg; |
| |
| #ifdef REGISTER_PREFIX |
| if (*start != REGISTER_PREFIX) |
| return FAIL; |
| p = start + 1; |
| #else |
| p = start; |
| #ifdef OPTIONAL_REGISTER_PREFIX |
| if (*p == OPTIONAL_REGISTER_PREFIX) |
| p++, start++; |
| #endif |
| #endif |
| if (!ISALPHA (*p) || !is_name_beginner (*p)) |
| return FAIL; |
| |
| c = *p++; |
| while (ISALPHA (c) || ISDIGIT (c) || c == '_') |
| c = *p++; |
| |
| *--p = 0; |
| reg = (struct reg_entry *) hash_find (htab, start); |
| *p = c; |
| |
| if (reg) |
| { |
| *ccp = p; |
| return reg->number; |
| } |
| |
| return FAIL; |
| } |
| |
| /* Search for the following register name in each of the possible reg name |
| tables. Return the classification if found, or REG_TYPE_MAX if not |
| present. */ |
| static enum arm_reg_type |
| arm_reg_parse_any (cp) |
| char *cp; |
| { |
| int i; |
| |
| for (i = (int) REG_TYPE_FIRST; i < (int) REG_TYPE_MAX; i++) |
| if (arm_reg_parse (&cp, all_reg_maps[i].htab) != FAIL) |
| return (enum arm_reg_type) i; |
| |
| return REG_TYPE_MAX; |
| } |
| |
| void |
| md_apply_fix3 (fixP, valP, seg) |
| fixS * fixP; |
| valueT * valP; |
| segT seg; |
| { |
| offsetT value = * valP; |
| offsetT newval; |
| unsigned int newimm; |
| unsigned long temp; |
| int sign; |
| char * buf = fixP->fx_where + fixP->fx_frag->fr_literal; |
| arm_fix_data * arm_data = (arm_fix_data *) fixP->tc_fix_data; |
| |
| assert (fixP->fx_r_type < BFD_RELOC_UNUSED); |
| |
| /* Note whether this will delete the relocation. */ |
| #if 0 |
| /* Patch from REarnshaw to JDavis (disabled for the moment, since it |
| doesn't work fully.) */ |
| if ((fixP->fx_addsy == 0 || symbol_constant_p (fixP->fx_addsy)) |
| && !fixP->fx_pcrel) |
| #else |
| if (fixP->fx_addsy == 0 && !fixP->fx_pcrel) |
| #endif |
| fixP->fx_done = 1; |
| |
| /* If this symbol is in a different section then we need to leave it for |
| the linker to deal with. Unfortunately, md_pcrel_from can't tell, |
| so we have to undo it's effects here. */ |
| if (fixP->fx_pcrel) |
| { |
| if (fixP->fx_addsy != NULL |
| && S_IS_DEFINED (fixP->fx_addsy) |
| && S_GET_SEGMENT (fixP->fx_addsy) != seg) |
| { |
| if (target_oabi |
| && (fixP->fx_r_type == BFD_RELOC_ARM_PCREL_BRANCH |
| || fixP->fx_r_type == BFD_RELOC_ARM_PCREL_BLX |
| )) |
| value = 0; |
| else |
| value += md_pcrel_from (fixP); |
| } |
| } |
| |
| /* Remember value for emit_reloc. */ |
| fixP->fx_addnumber = value; |
| |
| switch (fixP->fx_r_type) |
| { |
| case BFD_RELOC_ARM_IMMEDIATE: |
| newimm = validate_immediate (value); |
| temp = md_chars_to_number (buf, INSN_SIZE); |
| |
| /* If the instruction will fail, see if we can fix things up by |
| changing the opcode. */ |
| if (newimm == (unsigned int) FAIL |
| && (newimm = negate_data_op (&temp, value)) == (unsigned int) FAIL) |
| { |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid constant (%lx) after fixup"), |
| (unsigned long) value); |
| break; |
| } |
| |
| newimm |= (temp & 0xfffff000); |
| md_number_to_chars (buf, (valueT) newimm, INSN_SIZE); |
| fixP->fx_done = 1; |
| break; |
| |
| case BFD_RELOC_ARM_ADRL_IMMEDIATE: |
| { |
| unsigned int highpart = 0; |
| unsigned int newinsn = 0xe1a00000; /* nop. */ |
| |
| newimm = validate_immediate (value); |
| temp = md_chars_to_number (buf, INSN_SIZE); |
| |
| /* If the instruction will fail, see if we can fix things up by |
| changing the opcode. */ |
| if (newimm == (unsigned int) FAIL |
| && (newimm = negate_data_op (& temp, value)) == (unsigned int) FAIL) |
| { |
| /* No ? OK - try using two ADD instructions to generate |
| the value. */ |
| newimm = validate_immediate_twopart (value, & highpart); |
| |
| /* Yes - then make sure that the second instruction is |
| also an add. */ |
| if (newimm != (unsigned int) FAIL) |
| newinsn = temp; |
| /* Still No ? Try using a negated value. */ |
| else if ((newimm = validate_immediate_twopart (- value, & highpart)) != (unsigned int) FAIL) |
| temp = newinsn = (temp & OPCODE_MASK) | OPCODE_SUB << DATA_OP_SHIFT; |
| /* Otherwise - give up. */ |
| else |
| { |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("unable to compute ADRL instructions for PC offset of 0x%lx"), |
| (long) value); |
| break; |
| } |
| |
| /* Replace the first operand in the 2nd instruction (which |
| is the PC) with the destination register. We have |
| already added in the PC in the first instruction and we |
| do not want to do it again. */ |
| newinsn &= ~ 0xf0000; |
| newinsn |= ((newinsn & 0x0f000) << 4); |
| } |
| |
| newimm |= (temp & 0xfffff000); |
| md_number_to_chars (buf, (valueT) newimm, INSN_SIZE); |
| |
| highpart |= (newinsn & 0xfffff000); |
| md_number_to_chars (buf + INSN_SIZE, (valueT) highpart, INSN_SIZE); |
| } |
| break; |
| |
| case BFD_RELOC_ARM_OFFSET_IMM: |
| sign = value >= 0; |
| |
| if (value < 0) |
| value = - value; |
| |
| if (validate_offset_imm (value, 0) == FAIL) |
| { |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("bad immediate value for offset (%ld)"), |
| (long) value); |
| break; |
| } |
| |
| newval = md_chars_to_number (buf, INSN_SIZE); |
| newval &= 0xff7ff000; |
| newval |= value | (sign ? INDEX_UP : 0); |
| md_number_to_chars (buf, newval, INSN_SIZE); |
| break; |
| |
| case BFD_RELOC_ARM_OFFSET_IMM8: |
| case BFD_RELOC_ARM_HWLITERAL: |
| sign = value >= 0; |
| |
| if (value < 0) |
| value = - value; |
| |
| if (validate_offset_imm (value, 1) == FAIL) |
| { |
| if (fixP->fx_r_type == BFD_RELOC_ARM_HWLITERAL) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid literal constant: pool needs to be closer")); |
| else |
| as_bad (_("bad immediate value for half-word offset (%ld)"), |
| (long) value); |
| break; |
| } |
| |
| newval = md_chars_to_number (buf, INSN_SIZE); |
| newval &= 0xff7ff0f0; |
| newval |= ((value >> 4) << 8) | (value & 0xf) | (sign ? INDEX_UP : 0); |
| md_number_to_chars (buf, newval, INSN_SIZE); |
| break; |
| |
| case BFD_RELOC_ARM_LITERAL: |
| sign = value >= 0; |
| |
| if (value < 0) |
| value = - value; |
| |
| if (validate_offset_imm (value, 0) == FAIL) |
| { |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid literal constant: pool needs to be closer")); |
| break; |
| } |
| |
| newval = md_chars_to_number (buf, INSN_SIZE); |
| newval &= 0xff7ff000; |
| newval |= value | (sign ? INDEX_UP : 0); |
| md_number_to_chars (buf, newval, INSN_SIZE); |
| break; |
| |
| case BFD_RELOC_ARM_SHIFT_IMM: |
| newval = md_chars_to_number (buf, INSN_SIZE); |
| if (((unsigned long) value) > 32 |
| || (value == 32 |
| && (((newval & 0x60) == 0) || (newval & 0x60) == 0x60))) |
| { |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("shift expression is too large")); |
| break; |
| } |
| |
| if (value == 0) |
| /* Shifts of zero must be done as lsl. */ |
| newval &= ~0x60; |
| else if (value == 32) |
| value = 0; |
| newval &= 0xfffff07f; |
| newval |= (value & 0x1f) << 7; |
| md_number_to_chars (buf, newval, INSN_SIZE); |
| break; |
| |
| case BFD_RELOC_ARM_SWI: |
| if (arm_data->thumb_mode) |
| { |
| if (((unsigned long) value) > 0xff) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid swi expression")); |
| newval = md_chars_to_number (buf, THUMB_SIZE) & 0xff00; |
| newval |= value; |
| md_number_to_chars (buf, newval, THUMB_SIZE); |
| } |
| else |
| { |
| if (((unsigned long) value) > 0x00ffffff) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid swi expression")); |
| newval = md_chars_to_number (buf, INSN_SIZE) & 0xff000000; |
| newval |= value; |
| md_number_to_chars (buf, newval, INSN_SIZE); |
| } |
| break; |
| |
| case BFD_RELOC_ARM_MULTI: |
| if (((unsigned long) value) > 0xffff) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid expression in load/store multiple")); |
| newval = value | md_chars_to_number (buf, INSN_SIZE); |
| md_number_to_chars (buf, newval, INSN_SIZE); |
| break; |
| |
| case BFD_RELOC_ARM_PCREL_BRANCH: |
| newval = md_chars_to_number (buf, INSN_SIZE); |
| |
| /* Sign-extend a 24-bit number. */ |
| #define SEXT24(x) ((((x) & 0xffffff) ^ (~ 0x7fffff)) + 0x800000) |
| |
| #ifdef OBJ_ELF |
| if (! target_oabi) |
| value = fixP->fx_offset; |
| #endif |
| |
| /* We are going to store value (shifted right by two) in the |
| instruction, in a 24 bit, signed field. Thus we need to check |
| that none of the top 8 bits of the shifted value (top 7 bits of |
| the unshifted, unsigned value) are set, or that they are all set. */ |
| if ((value & ~ ((offsetT) 0x1ffffff)) != 0 |
| && ((value & ~ ((offsetT) 0x1ffffff)) != ~ ((offsetT) 0x1ffffff))) |
| { |
| #ifdef OBJ_ELF |
| /* Normally we would be stuck at this point, since we cannot store |
| the absolute address that is the destination of the branch in the |
| 24 bits of the branch instruction. If however, we happen to know |
| that the destination of the branch is in the same section as the |
| branch instruciton itself, then we can compute the relocation for |
| ourselves and not have to bother the linker with it. |
| |
| FIXME: The tests for OBJ_ELF and ! target_oabi are only here |
| because I have not worked out how to do this for OBJ_COFF or |
| target_oabi. */ |
| if (! target_oabi |
| && fixP->fx_addsy != NULL |
| && S_IS_DEFINED (fixP->fx_addsy) |
| && S_GET_SEGMENT (fixP->fx_addsy) == seg) |
| { |
| /* Get pc relative value to go into the branch. */ |
| value = * valP; |
| |
| /* Permit a backward branch provided that enough bits |
| are set. Allow a forwards branch, provided that |
| enough bits are clear. */ |
| if ( (value & ~ ((offsetT) 0x1ffffff)) == ~ ((offsetT) 0x1ffffff) |
| || (value & ~ ((offsetT) 0x1ffffff)) == 0) |
| fixP->fx_done = 1; |
| } |
| |
| if (! fixP->fx_done) |
| #endif |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("GAS can't handle same-section branch dest >= 0x04000000")); |
| } |
| |
| value >>= 2; |
| value += SEXT24 (newval); |
| |
| if ( (value & ~ ((offsetT) 0xffffff)) != 0 |
| && ((value & ~ ((offsetT) 0xffffff)) != ~ ((offsetT) 0xffffff))) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("out of range branch")); |
| |
| newval = (value & 0x00ffffff) | (newval & 0xff000000); |
| md_number_to_chars (buf, newval, INSN_SIZE); |
| break; |
| |
| case BFD_RELOC_ARM_PCREL_BLX: |
| { |
| offsetT hbit; |
| newval = md_chars_to_number (buf, INSN_SIZE); |
| |
| #ifdef OBJ_ELF |
| if (! target_oabi) |
| value = fixP->fx_offset; |
| #endif |
| hbit = (value >> 1) & 1; |
| value = (value >> 2) & 0x00ffffff; |
| value = (value + (newval & 0x00ffffff)) & 0x00ffffff; |
| newval = value | (newval & 0xfe000000) | (hbit << 24); |
| md_number_to_chars (buf, newval, INSN_SIZE); |
| } |
| break; |
| |
| case BFD_RELOC_THUMB_PCREL_BRANCH9: /* Conditional branch. */ |
| newval = md_chars_to_number (buf, THUMB_SIZE); |
| { |
| addressT diff = (newval & 0xff) << 1; |
| if (diff & 0x100) |
| diff |= ~0xff; |
| |
| value += diff; |
| if ((value & ~0xff) && ((value & ~0xff) != ~0xff)) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("branch out of range")); |
| newval = (newval & 0xff00) | ((value & 0x1ff) >> 1); |
| } |
| md_number_to_chars (buf, newval, THUMB_SIZE); |
| break; |
| |
| case BFD_RELOC_THUMB_PCREL_BRANCH12: /* Unconditional branch. */ |
| newval = md_chars_to_number (buf, THUMB_SIZE); |
| { |
| addressT diff = (newval & 0x7ff) << 1; |
| if (diff & 0x800) |
| diff |= ~0x7ff; |
| |
| value += diff; |
| if ((value & ~0x7ff) && ((value & ~0x7ff) != ~0x7ff)) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("branch out of range")); |
| newval = (newval & 0xf800) | ((value & 0xfff) >> 1); |
| } |
| md_number_to_chars (buf, newval, THUMB_SIZE); |
| break; |
| |
| case BFD_RELOC_THUMB_PCREL_BLX: |
| case BFD_RELOC_THUMB_PCREL_BRANCH23: |
| { |
| offsetT newval2; |
| addressT diff; |
| |
| newval = md_chars_to_number (buf, THUMB_SIZE); |
| newval2 = md_chars_to_number (buf + THUMB_SIZE, THUMB_SIZE); |
| diff = ((newval & 0x7ff) << 12) | ((newval2 & 0x7ff) << 1); |
| if (diff & 0x400000) |
| diff |= ~0x3fffff; |
| #ifdef OBJ_ELF |
| value = fixP->fx_offset; |
| #endif |
| value += diff; |
| |
| if ((value & ~0x3fffff) && ((value & ~0x3fffff) != ~0x3fffff)) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("branch with link out of range")); |
| |
| newval = (newval & 0xf800) | ((value & 0x7fffff) >> 12); |
| newval2 = (newval2 & 0xf800) | ((value & 0xfff) >> 1); |
| if (fixP->fx_r_type == BFD_RELOC_THUMB_PCREL_BLX) |
| /* For a BLX instruction, make sure that the relocation is rounded up |
| to a word boundary. This follows the semantics of the instruction |
| which specifies that bit 1 of the target address will come from bit |
| 1 of the base address. */ |
| newval2 = (newval2 + 1) & ~ 1; |
| md_number_to_chars (buf, newval, THUMB_SIZE); |
| md_number_to_chars (buf + THUMB_SIZE, newval2, THUMB_SIZE); |
| } |
| break; |
| |
| case BFD_RELOC_8: |
| if (fixP->fx_done || fixP->fx_pcrel) |
| md_number_to_chars (buf, value, 1); |
| #ifdef OBJ_ELF |
| else if (!target_oabi) |
| { |
| value = fixP->fx_offset; |
| md_number_to_chars (buf, value, 1); |
| } |
| #endif |
| break; |
| |
| case BFD_RELOC_16: |
| if (fixP->fx_done || fixP->fx_pcrel) |
| md_number_to_chars (buf, value, 2); |
| #ifdef OBJ_ELF |
| else if (!target_oabi) |
| { |
| value = fixP->fx_offset; |
| md_number_to_chars (buf, value, 2); |
| } |
| #endif |
| break; |
| |
| #ifdef OBJ_ELF |
| case BFD_RELOC_ARM_GOT32: |
| case BFD_RELOC_ARM_GOTOFF: |
| md_number_to_chars (buf, 0, 4); |
| break; |
| #endif |
| |
| case BFD_RELOC_RVA: |
| case BFD_RELOC_32: |
| if (fixP->fx_done || fixP->fx_pcrel) |
| md_number_to_chars (buf, value, 4); |
| #ifdef OBJ_ELF |
| else if (!target_oabi) |
| { |
| value = fixP->fx_offset; |
| md_number_to_chars (buf, value, 4); |
| } |
| #endif |
| break; |
| |
| #ifdef OBJ_ELF |
| case BFD_RELOC_ARM_PLT32: |
| /* It appears the instruction is fully prepared at this point. */ |
| break; |
| #endif |
| |
| case BFD_RELOC_ARM_CP_OFF_IMM: |
| sign = value >= 0; |
| if (value < -1023 || value > 1023 || (value & 3)) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("illegal value for co-processor offset")); |
| if (value < 0) |
| value = -value; |
| newval = md_chars_to_number (buf, INSN_SIZE) & 0xff7fff00; |
| newval |= (value >> 2) | (sign ? INDEX_UP : 0); |
| md_number_to_chars (buf, newval, INSN_SIZE); |
| break; |
| |
| case BFD_RELOC_ARM_THUMB_OFFSET: |
| newval = md_chars_to_number (buf, THUMB_SIZE); |
| /* Exactly what ranges, and where the offset is inserted depends |
| on the type of instruction, we can establish this from the |
| top 4 bits. */ |
| switch (newval >> 12) |
| { |
| case 4: /* PC load. */ |
| /* Thumb PC loads are somewhat odd, bit 1 of the PC is |
| forced to zero for these loads, so we will need to round |
| up the offset if the instruction address is not word |
| aligned (since the final address produced must be, and |
| we can only describe word-aligned immediate offsets). */ |
| |
| if ((fixP->fx_frag->fr_address + fixP->fx_where + value) & 3) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid offset, target not word aligned (0x%08X)"), |
| (unsigned int) (fixP->fx_frag->fr_address |
| + fixP->fx_where + value)); |
| |
| if ((value + 2) & ~0x3fe) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid offset, value too big (0x%08lX)"), |
| (long) value); |
| |
| /* Round up, since pc will be rounded down. */ |
| newval |= (value + 2) >> 2; |
| break; |
| |
| case 9: /* SP load/store. */ |
| if (value & ~0x3fc) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid offset, value too big (0x%08lX)"), |
| (long) value); |
| newval |= value >> 2; |
| break; |
| |
| case 6: /* Word load/store. */ |
| if (value & ~0x7c) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid offset, value too big (0x%08lX)"), |
| (long) value); |
| newval |= value << 4; /* 6 - 2. */ |
| break; |
| |
| case 7: /* Byte load/store. */ |
| if (value & ~0x1f) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid offset, value too big (0x%08lX)"), |
| (long) value); |
| newval |= value << 6; |
| break; |
| |
| case 8: /* Halfword load/store. */ |
| if (value & ~0x3e) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid offset, value too big (0x%08lX)"), |
| (long) value); |
| newval |= value << 5; /* 6 - 1. */ |
| break; |
| |
| default: |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| "Unable to process relocation for thumb opcode: %lx", |
| (unsigned long) newval); |
| break; |
| } |
| md_number_to_chars (buf, newval, THUMB_SIZE); |
| break; |
| |
| case BFD_RELOC_ARM_THUMB_ADD: |
| /* This is a complicated relocation, since we use it for all of |
| the following immediate relocations: |
| |
| 3bit ADD/SUB |
| 8bit ADD/SUB |
| 9bit ADD/SUB SP word-aligned |
| 10bit ADD PC/SP word-aligned |
| |
| The type of instruction being processed is encoded in the |
| instruction field: |
| |
| 0x8000 SUB |
| 0x00F0 Rd |
| 0x000F Rs |
| */ |
| newval = md_chars_to_number (buf, THUMB_SIZE); |
| { |
| int rd = (newval >> 4) & 0xf; |
| int rs = newval & 0xf; |
| int subtract = newval & 0x8000; |
| |
| if (rd == REG_SP) |
| { |
| if (value & ~0x1fc) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid immediate for stack address calculation")); |
| newval = subtract ? T_OPCODE_SUB_ST : T_OPCODE_ADD_ST; |
| newval |= value >> 2; |
| } |
| else if (rs == REG_PC || rs == REG_SP) |
| { |
| if (subtract || |
| value & ~0x3fc) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid immediate for address calculation (value = 0x%08lX)"), |
| (unsigned long) value); |
| newval = (rs == REG_PC ? T_OPCODE_ADD_PC : T_OPCODE_ADD_SP); |
| newval |= rd << 8; |
| newval |= value >> 2; |
| } |
| else if (rs == rd) |
| { |
| if (value & ~0xff) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid 8bit immediate")); |
| newval = subtract ? T_OPCODE_SUB_I8 : T_OPCODE_ADD_I8; |
| newval |= (rd << 8) | value; |
| } |
| else |
| { |
| if (value & ~0x7) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid 3bit immediate")); |
| newval = subtract ? T_OPCODE_SUB_I3 : T_OPCODE_ADD_I3; |
| newval |= rd | (rs << 3) | (value << 6); |
| } |
| } |
| md_number_to_chars (buf, newval, THUMB_SIZE); |
| break; |
| |
| case BFD_RELOC_ARM_THUMB_IMM: |
| newval = md_chars_to_number (buf, THUMB_SIZE); |
| switch (newval >> 11) |
| { |
| case 0x04: /* 8bit immediate MOV. */ |
| case 0x05: /* 8bit immediate CMP. */ |
| if (value < 0 || value > 255) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("invalid immediate: %ld is too large"), |
| (long) value); |
| newval |= value; |
| break; |
| |
| default: |
| abort (); |
| } |
| md_number_to_chars (buf, newval, THUMB_SIZE); |
| break; |
| |
| case BFD_RELOC_ARM_THUMB_SHIFT: |
| /* 5bit shift value (0..31). */ |
| if (value < 0 || value > 31) |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("illegal Thumb shift value: %ld"), (long) value); |
| newval = md_chars_to_number (buf, THUMB_SIZE) & 0xf03f; |
| newval |= value << 6; |
| md_number_to_chars (buf, newval, THUMB_SIZE); |
| break; |
| |
| case BFD_RELOC_VTABLE_INHERIT: |
| case BFD_RELOC_VTABLE_ENTRY: |
| fixP->fx_done = 0; |
| return; |
| |
| case BFD_RELOC_NONE: |
| default: |
| as_bad_where (fixP->fx_file, fixP->fx_line, |
| _("bad relocation fixup type (%d)"), fixP->fx_r_type); |
| } |
| } |
| |
| /* Translate internal representation of relocation info to BFD target |
| format. */ |
| |
| arelent * |
| tc_gen_reloc (section, fixp) |
| asection * section ATTRIBUTE_UNUSED; |
| fixS * fixp; |
| { |
| arelent * reloc; |
| bfd_reloc_code_real_type code; |
| |
| reloc = (arelent *) xmalloc (sizeof (arelent)); |
| |
| reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); |
| *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); |
| reloc->address = fixp->fx_frag->fr_address + fixp->fx_where; |
| |
| /* @@ Why fx_addnumber sometimes and fx_offset other times? */ |
| #ifndef OBJ_ELF |
| if (fixp->fx_pcrel == 0) |
| reloc->addend = fixp->fx_offset; |
| else |
| reloc->addend = fixp->fx_offset = reloc->address; |
| #else /* OBJ_ELF */ |
| reloc->addend = fixp->fx_offset; |
| #endif |
| |
| switch (fixp->fx_r_type) |
| { |
| case BFD_RELOC_8: |
| if (fixp->fx_pcrel) |
| { |
| code = BFD_RELOC_8_PCREL; |
| break; |
| } |
| |
| case BFD_RELOC_16: |
| if (fixp->fx_pcrel) |
| { |
| code = BFD_RELOC_16_PCREL; |
| break; |
| } |
| |
| case BFD_RELOC_32: |
| if (fixp->fx_pcrel) |
| { |
| code = BFD_RELOC_32_PCREL; |
| break; |
| } |
| |
| case BFD_RELOC_ARM_PCREL_BRANCH: |
| case BFD_RELOC_ARM_PCREL_BLX: |
| case BFD_RELOC_RVA: |
| case BFD_RELOC_THUMB_PCREL_BRANCH9: |
| case BFD_RELOC_THUMB_PCREL_BRANCH12: |
| case BFD_RELOC_THUMB_PCREL_BRANCH23: |
| case BFD_RELOC_THUMB_PCREL_BLX: |
| case BFD_RELOC_VTABLE_ENTRY: |
| case BFD_RELOC_VTABLE_INHERIT: |
| code = fixp->fx_r_type; |
| break; |
| |
| case BFD_RELOC_ARM_LITERAL: |
| case BFD_RELOC_ARM_HWLITERAL: |
| /* If this is called then the a literal has |
| been referenced across a section boundary. */ |
| as_bad_where (fixp->fx_file, fixp->fx_line, |
| _("literal referenced across section boundary")); |
| return NULL; |
| |
| #ifdef OBJ_ELF |
| case BFD_RELOC_ARM_GOT32: |
| case BFD_RELOC_ARM_GOTOFF: |
| case BFD_RELOC_ARM_PLT32: |
| code = fixp->fx_r_type; |
| break; |
| #endif |
| |
| case BFD_RELOC_ARM_IMMEDIATE: |
| as_bad_where (fixp->fx_file, fixp->fx_line, |
| _("internal relocation (type: IMMEDIATE) not fixed up")); |
| return NULL; |
| |
| case BFD_RELOC_ARM_ADRL_IMMEDIATE: |
| as_bad_where (fixp->fx_file, fixp->fx_line, |
| _("ADRL used for a symbol not defined in the same file")); |
| return NULL; |
| |
| case BFD_RELOC_ARM_OFFSET_IMM: |
| as_bad_where (fixp->fx_file, fixp->fx_line, |
| _("internal_relocation (type: OFFSET_IMM) not fixed up")); |
| return NULL; |
| |
| default: |
| { |
| char * type; |
| |
| switch (fixp->fx_r_type) |
| { |
| case BFD_RELOC_ARM_OFFSET_IMM8: type = "OFFSET_IMM8"; break; |
| case BFD_RELOC_ARM_SHIFT_IMM: type = "SHIFT_IMM"; break; |
| case BFD_RELOC_ARM_SWI: type = "SWI"; break; |
| case BFD_RELOC_ARM_MULTI: type = "MULTI"; break; |
| case BFD_RELOC_ARM_CP_OFF_IMM: type = "CP_OFF_IMM"; break; |
| case BFD_RELOC_ARM_THUMB_ADD: type = "THUMB_ADD"; break; |
| case BFD_RELOC_ARM_THUMB_SHIFT: type = "THUMB_SHIFT"; break; |
| case BFD_RELOC_ARM_THUMB_IMM: type = "THUMB_IMM"; break; |
| case BFD_RELOC_ARM_THUMB_OFFSET: type = "THUMB_OFFSET"; break; |
| default: type = _("<unknown>"); break; |
| } |
| as_bad_where (fixp->fx_file, fixp->fx_line, |
| _("cannot represent %s relocation in this object file format"), |
| type); |
| return NULL; |
| } |
| } |
| |
| #ifdef OBJ_ELF |
| if ((code == BFD_RELOC_32_PCREL || code == BFD_RELOC_32) |
| && GOT_symbol |
| && fixp->fx_addsy == GOT_symbol) |
| { |
| code = BFD_RELOC_ARM_GOTPC; |
| reloc->addend = fixp->fx_offset = reloc->address; |
| } |
| #endif |
| |
| reloc->howto = bfd_reloc_type_lookup (stdoutput, code); |
| |
| if (reloc->howto == NULL) |
| { |
| as_bad_where (fixp->fx_file, fixp->fx_line, |
| _("cannot represent %s relocation in this object file format"), |
| bfd_get_reloc_code_name (code)); |
| return NULL; |
| } |
| |
| /* HACK: Since arm ELF uses Rel instead of Rela, encode the |
| vtable entry to be used in the relocation's section offset. */ |
| if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY) |
| reloc->address = fixp->fx_offset; |
| |
| return reloc; |
| } |
| |
| int |
| md_estimate_size_before_relax (fragP, segtype) |
| fragS * fragP ATTRIBUTE_UNUSED; |
| segT segtype ATTRIBUTE_UNUSED; |
| { |
| as_fatal (_("md_estimate_size_before_relax\n")); |
| return 1; |
| } |
| |
| static void |
| output_inst (str) |
| const char *str; |
| { |
| char * to = NULL; |
| |
| if (inst.error) |
| { |
| as_bad ("%s -- `%s'", inst.error, str); |
| return; |
| } |
| |
| to = frag_more (inst.size); |
| |
| if (thumb_mode && (inst.size > THUMB_SIZE)) |
| { |
| assert (inst.size == (2 * THUMB_SIZE)); |
| md_number_to_chars (to, inst.instruction >> 16, THUMB_SIZE); |
| md_number_to_chars (to + THUMB_SIZE, inst.instruction, THUMB_SIZE); |
| } |
| else if (inst.size > INSN_SIZE) |
| { |
| assert (inst.size == (2 * INSN_SIZE)); |
| md_number_to_chars (to, inst.instruction, INSN_SIZE); |
| md_number_to_chars (to + INSN_SIZE, inst.instruction, INSN_SIZE); |
| } |
| else |
| md_number_to_chars (to, inst.instruction, inst.size); |
| |
| if (inst.reloc.type != BFD_RELOC_NONE) |
| fix_new_arm (frag_now, to - frag_now->fr_literal, |
| inst.size, & inst.reloc.exp, inst.reloc.pc_rel, |
| inst.reloc.type); |
| |
| #ifdef OBJ_ELF |
| dwarf2_emit_insn (inst.size); |
| #endif |
| } |
| |
| void |
| md_assemble (str) |
| char * str; |
| { |
| char c; |
| char *p; |
| char *start; |
| |
| /* Align the instruction. |
| This may not be the right thing to do but ... */ |
| #if 0 |
| arm_align (2, 0); |
| #endif |
| |
| /* Align the previous label if needed. */ |
| if (last_label_seen != NULL) |
| { |
| symbol_set_frag (last_label_seen, frag_now); |
| S_SET_VALUE (last_label_seen, (valueT) frag_now_fix ()); |
| S_SET_SEGMENT (last_label_seen, now_seg); |
| } |
| |
| memset (&inst, '\0', sizeof (inst)); |
| inst.reloc.type = BFD_RELOC_NONE; |
| |
| skip_whitespace (str); |
| |
| /* Scan up to the end of the op-code, which must end in white space or |
| end of string. */ |
| for (start = p = str; *p != '\0'; p++) |
| if (*p == ' ') |
| break; |
| |
| if (p == str) |
| { |
| as_bad (_("no operator -- statement `%s'\n"), str); |
| return; |
| } |
| |
| if (thumb_mode) |
| { |
| const struct thumb_opcode * opcode; |
| |
| c = *p; |
| *p = '\0'; |
| opcode = (const struct thumb_opcode *) hash_find (arm_tops_hsh, str); |
| *p = c; |
| |
| if (opcode) |
| { |
| /* Check that this instruction is supported for this CPU. */ |
| if (thumb_mode == 1 && (opcode->variant & cpu_variant) == 0) |
| { |
| as_bad (_("selected processor does not support `%s'"), str); |
| return; |
| } |
| |
| inst.instruction = opcode->value; |
| inst.size = opcode->size; |
| (*opcode->parms) (p); |
| output_inst (str); |
| return; |
| } |
| } |
| else |
| { |
| const struct asm_opcode * opcode; |
| |
| c = *p; |
| *p = '\0'; |
| opcode = (const struct asm_opcode *) hash_find (arm_ops_hsh, str); |
| *p = c; |
| |
| if (opcode) |
| { |
| /* Check that this instruction is supported for this CPU. */ |
| if ((opcode->variant & cpu_variant) == 0) |
| { |
| as_bad (_("selected processor does not support `%s'"), str); |
| return; |
| } |
| |
| inst.instruction = opcode->value; |
| inst.size = INSN_SIZE; |
| (*opcode->parms) (p); |
| output_inst (str); |
| return; |
| } |
| } |
| |
| /* It wasn't an instruction, but it might be a register alias of the form |
| alias .req reg. */ |
| if (create_register_alias (str, p)) |
| return; |
| |
| as_bad (_("bad instruction `%s'"), start); |
| } |
| |
| /* md_parse_option |
| Invocation line includes a switch not recognized by the base assembler. |
| See if it's a processor-specific option. |
| |
| This routine is somewhat complicated by the need for backwards |
| compatibility (since older releases of gcc can't be changed). |
| The new options try to make the interface as compatible as |
| possible with GCC. |
| |
| New options (supported) are: |
| |
| -mcpu=<cpu name> Assemble for selected processor |
| -march=<architecture name> Assemble for selected architecture |
| -mfpu=<fpu architecture> Assemble for selected FPU. |
| -EB/-mbig-endian Big-endian |
| -EL/-mlittle-endian Little-endian |
| -k Generate PIC code |
| -mthumb Start in Thumb mode |
| -mthumb-interwork Code supports ARM/Thumb interworking |
| |
| For now we will also provide support for: |
| |
| -mapcs-32 32-bit Program counter |
| -mapcs-26 26-bit Program counter |
| -macps-float Floats passed in FP registers |
| -mapcs-reentrant Reentrant code |
| -matpcs |
| (sometime these will probably be replaced with -mapcs=<list of options> |
| and -matpcs=<list of options>) |
| |
| The remaining options are only supported for back-wards compatibility. |
| Cpu variants, the arm part is optional: |
| -m[arm]1 Currently not supported. |
| -m[arm]2, -m[arm]250 Arm 2 and Arm 250 processor |
| -m[arm]3 Arm 3 processor |
| -m[arm]6[xx], Arm 6 processors |
| -m[arm]7[xx][t][[d]m] Arm 7 processors |
| -m[arm]8[10] Arm 8 processors |
| -m[arm]9[20][tdmi] Arm 9 processors |
| -mstrongarm[110[0]] StrongARM processors |
| -mxscale XScale processors |
| -m[arm]v[2345[t[e]]] Arm architectures |
| -mall All (except the ARM1) |
| FP variants: |
| -mfpa10, -mfpa11 FPA10 and 11 co-processor instructions |
| -mfpe-old (No float load/store multiples) |
| -mvfpxd VFP Single precision |
| -mvfp All VFP |
| -mno-fpu Disable all floating point instructions |
| |
| The following CPU names are recognized: |
| arm1, arm2, arm250, arm3, arm6, arm600, arm610, arm620, |
| arm7, arm7m, arm7d, arm7dm, arm7di, arm7dmi, arm70, arm700, |
| arm700i, arm710 arm710t, arm720, arm720t, arm740t, arm710c, |
| arm7100, arm7500, arm7500fe, arm7tdmi, arm8, arm810, arm9, |
| arm920, arm920t, arm940t, arm946, arm966, arm9tdmi, arm9e, |
| arm10t arm10e, arm1020t, arm1020e, arm10200e, |
| strongarm, strongarm110, strongarm1100, strongarm1110, xscale. |
| |
| */ |
| |
| const char * md_shortopts = "m:k"; |
| |
| #ifdef ARM_BI_ENDIAN |
| #define OPTION_EB (OPTION_MD_BASE + 0) |
| #define OPTION_EL (OPTION_MD_BASE + 1) |
| #else |
| #if TARGET_BYTES_BIG_ENDIAN |
| #define OPTION_EB (OPTION_MD_BASE + 0) |
| #else |
| #define OPTION_EL (OPTION_MD_BASE + 1) |
| #endif |
| #endif |
| |
| struct option md_longopts[] = |
| { |
| #ifdef OPTION_EB |
| {"EB", no_argument, NULL, OPTION_EB}, |
| #endif |
| #ifdef OPTION_EL |
| {"EL", no_argument, NULL, OPTION_EL}, |
| #endif |
| {NULL, no_argument, NULL, 0} |
| }; |
| |
| size_t md_longopts_size = sizeof (md_longopts); |
| |
| struct arm_option_table |
| { |
| char *option; /* Option name to match. */ |
| char *help; /* Help information. */ |
| int *var; /* Variable to change. */ |
| int value; /* What to change it to. */ |
| char *deprecated; /* If non-null, print this message. */ |
| }; |
| |
| struct arm_option_table arm_opts[] = |
| { |
| {"k", N_("generate PIC code"), &pic_code, 1, NULL}, |
| {"mthumb", N_("assemble Thumb code"), &thumb_mode, 1, NULL}, |
| {"mthumb-interwork", N_("support ARM/Thumb interworking"), |
| &support_interwork, 1, NULL}, |
| {"moabi", N_("use old ABI (ELF only)"), &target_oabi, 1, NULL}, |
| {"mapcs-32", N_("code uses 32-bit program counter"), &uses_apcs_26, 0, NULL}, |
| {"mapcs-26", N_("code uses 26-bit program counter"), &uses_apcs_26, 1, NULL}, |
| {"mapcs-float", N_("floating point args are in fp regs"), &uses_apcs_float, |
| 1, NULL}, |
| {"mapcs-reentrant", N_("re-entrant code"), &pic_code, 1, NULL}, |
| {"matpcs", N_("code is ATPCS conformant"), &atpcs, 1, NULL}, |
| {"mbig-endian", N_("assemble for big-endian"), &target_big_endian, 1, NULL}, |
| {"mlittle-endian", N_("assemble for little-endian"), &target_big_endian, 1, |
| NULL}, |
| |
| /* These are recognized by the assembler, but have no affect on code. */ |
| {"mapcs-frame", N_("use frame pointer"), NULL, 0, NULL}, |
| {"mapcs-stack-check", N_("use stack size checking"), NULL, 0, NULL}, |
| |
| /* DON'T add any new processors to this list -- we want the whole list |
| to go away... Add them to the processors table instead. */ |
| {"marm1", NULL, &legacy_cpu, ARM_ARCH_V1, N_("use -mcpu=arm1")}, |
| {"m1", NULL, &legacy_cpu, ARM_ARCH_V1, N_("use -mcpu=arm1")}, |
| {"marm2", NULL, &legacy_cpu, ARM_ARCH_V2, N_("use -mcpu=arm2")}, |
| {"m2", NULL, &legacy_cpu, ARM_ARCH_V2, N_("use -mcpu=arm2")}, |
| {"marm250", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -mcpu=arm250")}, |
| {"m250", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -mcpu=arm250")}, |
| {"marm3", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -mcpu=arm3")}, |
| {"m3", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -mcpu=arm3")}, |
| {"marm6", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm6")}, |
| {"m6", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm6")}, |
| {"marm600", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm600")}, |
| {"m600", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm600")}, |
| {"marm610", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm610")}, |
| {"m610", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm610")}, |
| {"marm620", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm620")}, |
| {"m620", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm620")}, |
| {"marm7", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7")}, |
| {"m7", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7")}, |
| {"marm70", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm70")}, |
| {"m70", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm70")}, |
| {"marm700", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm700")}, |
| {"m700", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm700")}, |
| {"marm700i", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm700i")}, |
| {"m700i", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm700i")}, |
| {"marm710", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm710")}, |
| {"m710", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm710")}, |
| {"marm710c", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm710c")}, |
| {"m710c", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm710c")}, |
| {"marm720", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm720")}, |
| {"m720", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm720")}, |
| {"marm7d", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7d")}, |
| {"m7d", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7d")}, |
| {"marm7di", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7di")}, |
| {"m7di", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7di")}, |
| {"marm7m", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7m")}, |
| {"m7m", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7m")}, |
| {"marm7dm", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7dm")}, |
| {"m7dm", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7dm")}, |
| {"marm7dmi", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7dmi")}, |
| {"m7dmi", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -mcpu=arm7dmi")}, |
| {"marm7100", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7100")}, |
| {"m7100", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7100")}, |
| {"marm7500", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7500")}, |
| {"m7500", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7500")}, |
| {"marm7500fe", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7500fe")}, |
| {"m7500fe", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -mcpu=arm7500fe")}, |
| {"marm7t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm7tdmi")}, |
| {"m7t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm7tdmi")}, |
| {"marm7tdmi", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm7tdmi")}, |
| {"m7tdmi", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm7tdmi")}, |
| {"marm710t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm710t")}, |
| {"m710t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm710t")}, |
| {"marm720t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm720t")}, |
| {"m720t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm720t")}, |
| {"marm740t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm740t")}, |
| {"m740t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm740t")}, |
| {"marm8", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -mcpu=arm8")}, |
| {"m8", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -mcpu=arm8")}, |
| {"marm810", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -mcpu=arm810")}, |
| {"m810", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -mcpu=arm810")}, |
| {"marm9", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm9")}, |
| {"m9", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm9")}, |
| {"marm9tdmi", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm9tdmi")}, |
| {"m9tdmi", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm9tdmi")}, |
| {"marm920", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm920")}, |
| {"m920", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm920")}, |
| {"marm940", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm940")}, |
| {"m940", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -mcpu=arm940")}, |
| {"mstrongarm", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -mcpu=strongarm")}, |
| {"mstrongarm110", NULL, &legacy_cpu, ARM_ARCH_V4, |
| N_("use -mcpu=strongarm110")}, |
| {"mstrongarm1100", NULL, &legacy_cpu, ARM_ARCH_V4, |
| N_("use -mcpu=strongarm1100")}, |
| {"mstrongarm1110", NULL, &legacy_cpu, ARM_ARCH_V4, |
| N_("use -mcpu=strongarm1110")}, |
| {"mxscale", NULL, &legacy_cpu, ARM_ARCH_XSCALE, N_("use -mcpu=xscale")}, |
| {"mall", NULL, &legacy_cpu, ARM_ANY, N_("use -mcpu=all")}, |
| |
| /* Architecture variants -- don't add any more to this list either. */ |
| {"mv2", NULL, &legacy_cpu, ARM_ARCH_V2, N_("use -march=armv2")}, |
| {"marmv2", NULL, &legacy_cpu, ARM_ARCH_V2, N_("use -march=armv2")}, |
| {"mv2a", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -march=armv2a")}, |
| {"marmv2a", NULL, &legacy_cpu, ARM_ARCH_V2S, N_("use -march=armv2a")}, |
| {"mv3", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -march=armv3")}, |
| {"marmv3", NULL, &legacy_cpu, ARM_ARCH_V3, N_("use -march=armv3")}, |
| {"mv3m", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -march=armv3m")}, |
| {"marmv3m", NULL, &legacy_cpu, ARM_ARCH_V3M, N_("use -march=armv3m")}, |
| {"mv4", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -march=armv4")}, |
| {"marmv4", NULL, &legacy_cpu, ARM_ARCH_V4, N_("use -march=armv4")}, |
| {"mv4t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -march=armv4t")}, |
| {"marmv4t", NULL, &legacy_cpu, ARM_ARCH_V4T, N_("use -march=armv4t")}, |
| {"mv5", NULL, &legacy_cpu, ARM_ARCH_V5, N_("use -march=armv5")}, |
| {"marmv5", NULL, &legacy_cpu, ARM_ARCH_V5, N_("use -march=armv5")}, |
| {"mv5t", NULL, &legacy_cpu, ARM_ARCH_V5T, N_("use -march=armv5t")}, |
| {"marmv5t", NULL, &legacy_cpu, ARM_ARCH_V5T, N_("use -march=armv5t")}, |
| {"mv5e", NULL, &legacy_cpu, ARM_ARCH_V5TE, N_("use -march=armv5te")}, |
| {"marmv5e", NULL, &legacy_cpu, ARM_ARCH_V5TE, N_("use -march=armv5te")}, |
| |
| /* Floating point variants -- don't add any more to this list either. */ |
| {"mfpe-old", NULL, &legacy_fpu, FPU_ARCH_FPE, N_("use -mfpu=fpe")}, |
| {"mfpa10", NULL, &legacy_fpu, FPU_ARCH_FPA, N_("use -mfpu=fpa10")}, |
| {"mfpa11", NULL, &legacy_fpu, FPU_ARCH_FPA, N_("use -mfpu=fpa11")}, |
| {"mno-fpu", NULL, &legacy_fpu, 0, |
| N_("use either -mfpu=softfpa or -mfpu=softvfp")}, |
| |
| {NULL, NULL, NULL, 0, NULL} |
| }; |
| |
| struct arm_cpu_option_table |
| { |
| char *name; |
| int value; |
| /* For some CPUs we assume an FPU unless the user explicitly sets |
| -mfpu=... */ |
| int default_fpu; |
| }; |
| |
| /* This list should, at a minimum, contain all the cpu names |
| recognized by GCC. */ |
| static struct arm_cpu_option_table arm_cpus[] = |
| { |
| {"all", ARM_ANY, FPU_ARCH_FPA}, |
| {"arm1", ARM_ARCH_V1, FPU_ARCH_FPA}, |
| {"arm2", ARM_ARCH_V2, FPU_ARCH_FPA}, |
| {"arm250", ARM_ARCH_V2S, FPU_ARCH_FPA}, |
| {"arm3", ARM_ARCH_V2S, FPU_ARCH_FPA}, |
| {"arm6", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm60", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm600", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm610", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm620", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm7", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm7m", ARM_ARCH_V3M, FPU_ARCH_FPA}, |
| {"arm7d", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm7dm", ARM_ARCH_V3M, FPU_ARCH_FPA}, |
| {"arm7di", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm7dmi", ARM_ARCH_V3M, FPU_ARCH_FPA}, |
| {"arm70", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm700", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm700i", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm710", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm710t", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"arm720", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm720t", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"arm740t", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"arm710c", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm7100", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm7500", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm7500fe", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"arm7t", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"arm7tdmi", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"arm8", ARM_ARCH_V4, FPU_ARCH_FPA}, |
| {"arm810", ARM_ARCH_V4, FPU_ARCH_FPA}, |
| {"strongarm", ARM_ARCH_V4, FPU_ARCH_FPA}, |
| {"strongarm1", ARM_ARCH_V4, FPU_ARCH_FPA}, |
| {"strongarm110", ARM_ARCH_V4, FPU_ARCH_FPA}, |
| {"strongarm1100", ARM_ARCH_V4, FPU_ARCH_FPA}, |
| {"strongarm1110", ARM_ARCH_V4, FPU_ARCH_FPA}, |
| {"arm9", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"arm920", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"arm920t", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"arm922t", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"arm940t", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"arm9tdmi", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| /* For V5 or later processors we default to using VFP; but the user |
| should really set the FPU type explicitly. */ |
| {"arm9e-r0", ARM_ARCH_V5TExP, FPU_ARCH_VFP_V2}, |
| {"arm9e", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2}, |
| {"arm926ej", ARM_ARCH_V5TEJ, FPU_ARCH_VFP_V2}, |
| {"arm946e-r0", ARM_ARCH_V5TExP, FPU_ARCH_VFP_V2}, |
| {"arm946e", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2}, |
| {"arm966e-r0", ARM_ARCH_V5TExP, FPU_ARCH_VFP_V2}, |
| {"arm966e", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2}, |
| {"arm10t", ARM_ARCH_V5T, FPU_ARCH_VFP_V1}, |
| {"arm10e", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2}, |
| {"arm1020", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2}, |
| {"arm1020t", ARM_ARCH_V5T, FPU_ARCH_VFP_V1}, |
| {"arm1020e", ARM_ARCH_V5TE, FPU_ARCH_VFP_V2}, |
| /* ??? XSCALE is really an architecture. */ |
| {"xscale", ARM_ARCH_XSCALE, FPU_ARCH_VFP_V2}, |
| {"i80200", ARM_ARCH_XSCALE, FPU_ARCH_VFP_V2}, |
| /* Maverick */ |
| {"ep9312", ARM_ARCH_V4T | ARM_CEXT_MAVERICK, FPU_NONE}, |
| {NULL, 0, 0} |
| }; |
| |
| struct arm_arch_option_table |
| { |
| char *name; |
| int value; |
| int default_fpu; |
| }; |
| |
| /* This list should, at a minimum, contain all the architecture names |
| recognized by GCC. */ |
| static struct arm_arch_option_table arm_archs[] = |
| { |
| {"all", ARM_ANY, FPU_ARCH_FPA}, |
| {"armv1", ARM_ARCH_V1, FPU_ARCH_FPA}, |
| {"armv2", ARM_ARCH_V2, FPU_ARCH_FPA}, |
| {"armv2a", ARM_ARCH_V2S, FPU_ARCH_FPA}, |
| {"armv2s", ARM_ARCH_V2S, FPU_ARCH_FPA}, |
| {"armv3", ARM_ARCH_V3, FPU_ARCH_FPA}, |
| {"armv3m", ARM_ARCH_V3M, FPU_ARCH_FPA}, |
| {"armv4", ARM_ARCH_V4, FPU_ARCH_FPA}, |
| {"armv4xm", ARM_ARCH_V4xM, FPU_ARCH_FPA}, |
| {"armv4t", ARM_ARCH_V4T, FPU_ARCH_FPA}, |
| {"armv4txm", ARM_ARCH_V4TxM, FPU_ARCH_FPA}, |
| {"armv5", ARM_ARCH_V5, FPU_ARCH_VFP}, |
| {"armv5t", ARM_ARCH_V5T, FPU_ARCH_VFP}, |
| {"armv5txm", ARM_ARCH_V5TxM, FPU_ARCH_VFP}, |
| {"armv5te", ARM_ARCH_V5TE, FPU_ARCH_VFP}, |
| {"armv5texp", ARM_ARCH_V5TExP, FPU_ARCH_VFP}, |
| {"armv5tej", ARM_ARCH_V5TEJ, FPU_ARCH_VFP}, |
| {"xscale", ARM_ARCH_XSCALE, FPU_ARCH_VFP}, |
| {NULL, 0, 0} |
| }; |
| |
| /* ISA extensions in the co-processor space. */ |
| struct arm_arch_extension_table |
| { |
| char *name; |
| int value; |
| }; |
| |
| static struct arm_arch_extension_table arm_extensions[] = |
| { |
| {"maverick", ARM_CEXT_MAVERICK}, |
| {"xscale", ARM_CEXT_XSCALE}, |
| {NULL, 0} |
| }; |
| |
| struct arm_fpu_option_table |
| { |
| char *name; |
| int value; |
| }; |
| |
| /* This list should, at a minimum, contain all the fpu names |
| recognized by GCC. */ |
| static struct arm_fpu_option_table arm_fpus[] = |
| { |
| {"softfpa", FPU_NONE}, |
| {"fpe", FPU_ARCH_FPE}, |
| {"fpe2", FPU_ARCH_FPE}, |
| {"fpe3", FPU_ARCH_FPA}, /* Third release supports LFM/SFM. */ |
| {"fpa", FPU_ARCH_FPA}, |
| {"fpa10", FPU_ARCH_FPA}, |
| {"fpa11", FPU_ARCH_FPA}, |
| {"arm7500fe", FPU_ARCH_FPA}, |
| {"softvfp", FPU_ARCH_VFP}, |
| {"softvfp+vfp", FPU_ARCH_VFP_V2}, |
| {"vfp", FPU_ARCH_VFP_V2}, |
| {"vfp9", FPU_ARCH_VFP_V2}, |
| {"vfp10", FPU_ARCH_VFP_V2}, |
| {"vfp10-r0", FPU_ARCH_VFP_V1}, |
| {"vfpxd", FPU_ARCH_VFP_V1xD}, |
| {"arm1020t", FPU_ARCH_VFP_V1}, |
| {"arm1020e", FPU_ARCH_VFP_V2}, |
| {NULL, 0} |
| }; |
| |
| struct arm_long_option_table |
| { |
| char *option; /* Substring to match. */ |
| char *help; /* Help information. */ |
| int (*func) PARAMS ((char *subopt)); /* Function to decode sub-option. */ |
| char *deprecated; /* If non-null, print this message. */ |
| }; |
| |
| static int |
| arm_parse_extension (str, opt_p) |
| char *str; |
| int *opt_p; |
| { |
| while (str != NULL && *str != 0) |
| { |
| struct arm_arch_extension_table *opt; |
| char *ext; |
| int optlen; |
| |
| if (*str != '+') |
| { |
| as_bad (_("invalid architectural extension")); |
| return 0; |
| } |
| |
| str++; |
| ext = strchr (str, '+'); |
| |
| if (ext != NULL) |
| optlen = ext - str; |
| else |
| optlen = strlen (str); |
| |
| if (optlen == 0) |
| { |
| as_bad (_("missing architectural extension")); |
| return 0; |
| } |
| |
| for (opt = arm_extensions; opt->name != NULL; opt++) |
| if (strncmp (opt->name, str, optlen) == 0) |
| { |
| *opt_p |= opt->value; |
| break; |
| } |
| |
| if (opt->name == NULL) |
| { |
| as_bad (_("unknown architectural extnsion `%s'"), str); |
| return 0; |
| } |
| |
| str = ext; |
| }; |
| |
| return 1; |
| } |
| |
| static int |
| arm_parse_cpu (str) |
| char *str; |
| { |
| struct arm_cpu_option_table *opt; |
| char *ext = strchr (str, '+'); |
| int optlen; |
| |
| if (ext != NULL) |
| optlen = ext - str; |
| else |
| optlen = strlen (str); |
| |
| if (optlen == 0) |
| { |
| as_bad (_("missing cpu name `%s'"), str); |
| return 0; |
| } |
| |
| for (opt = arm_cpus; opt->name != NULL; opt++) |
| if (strncmp (opt->name, str, optlen) == 0) |
| { |
| mcpu_cpu_opt = opt->value; |
| mcpu_fpu_opt = opt->default_fpu; |
| |
| if (ext != NULL) |
| return arm_parse_extension (ext, &mcpu_cpu_opt); |
| |
| return 1; |
| } |
| |
| as_bad (_("unknown cpu `%s'"), str); |
| return 0; |
| } |
| |
| static int |
| arm_parse_arch (str) |
| char *str; |
| { |
| struct arm_arch_option_table *opt; |
| char *ext = strchr (str, '+'); |
| int optlen; |
| |
| if (ext != NULL) |
| optlen = ext - str; |
| else |
| optlen = strlen (str); |
| |
| if (optlen == 0) |
| { |
| as_bad (_("missing architecture name `%s'"), str); |
| return 0; |
| } |
| |
| |
| for (opt = arm_archs; opt->name != NULL; opt++) |
| if (strcmp (opt->name, str) == 0) |
| { |
| march_cpu_opt = opt->value; |
| march_fpu_opt = opt->default_fpu; |
| |
| if (ext != NULL) |
| return arm_parse_extension (ext, &march_cpu_opt); |
| |
| return 1; |
| } |
| |
| as_bad (_("unknown architecture `%s'\n"), str); |
| return 0; |
| } |
| |
| static int |
| arm_parse_fpu (str) |
| char *str; |
| { |
| struct arm_fpu_option_table *opt; |
| |
| for (opt = arm_fpus; opt->name != NULL; opt++) |
| if (strcmp (opt->name, str) == 0) |
| { |
| mfpu_opt = opt->value; |
| return 1; |
| } |
| |
| as_bad (_("unknown floating point format `%s'\n"), str); |
| return 0; |
| } |
| |
| struct arm_long_option_table arm_long_opts[] = |
| { |
| {"mcpu=", N_("<cpu name>\t assemble for CPU <cpu name>"), |
| arm_parse_cpu, NULL}, |
| {"march=", N_("<arch name>\t assemble for architecture <arch name>"), |
| arm_parse_arch, NULL}, |
| {"mfpu=", N_("<fpu name>\t assemble for FPU architecture <fpu name>"), |
| arm_parse_fpu, NULL}, |
| {NULL, NULL, 0, NULL} |
| }; |
| |
| int |
| md_parse_option (c, arg) |
| int c; |
| char * arg; |
| { |
| struct arm_option_table *opt; |
| struct arm_long_option_table *lopt; |
| |
| switch (c) |
| { |
| #ifdef OPTION_EB |
| case OPTION_EB: |
| target_big_endian = 1; |
| break; |
| #endif |
| |
| #ifdef OPTION_EL |
| case OPTION_EL: |
| target_big_endian = 0; |
| break; |
| #endif |
| |
| case 'a': |
| /* Listing option. Just ignore these, we don't support additional |
| ones. */ |
| return 0; |
| |
| default: |
| for (opt = arm_opts; opt->option != NULL; opt++) |
| { |
| if (c == opt->option[0] |
| && ((arg == NULL && opt->option[1] == 0) |
| || strcmp (arg, opt->option + 1) == 0)) |
| { |
| #if WARN_DEPRECATED |
| /* If the option is deprecated, tell the user. */ |
| if (opt->deprecated != NULL) |
| as_tsktsk (_("option `-%c%s' is deprecated: %s"), c, |
| arg ? arg : "", _(opt->deprecated)); |
| #endif |
| |
| if (opt->var != NULL) |
| *opt->var = opt->value; |
| |
| return 1; |
| } |
| } |
| |
| for (lopt = arm_long_opts; lopt->option != NULL; lopt++) |
| { |
| /* These options are expected to have an argument. */ |
| if (c == lopt->option[0] |
| && arg != NULL |
| && strncmp (arg, lopt->option + 1, |
| strlen (lopt->option + 1)) == 0) |
| { |
| #if WARN_DEPRECATED |
| /* If the option is deprecated, tell the user. */ |
| if (lopt->deprecated != NULL) |
| as_tsktsk (_("option `-%c%s' is deprecated: %s"), c, arg, |
| _(lopt->deprecated)); |
| #endif |
| |
| /* Call the sup-option parser. */ |
| return (*lopt->func)(arg + strlen (lopt->option) - 1); |
| } |
| } |
| |
| as_bad (_("unrecognized option `-%c%s'"), c, arg ? arg : ""); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| void |
| md_show_usage (fp) |
| FILE * fp; |
| { |
| struct arm_option_table *opt; |
| struct arm_long_option_table *lopt; |
| |
| fprintf (fp, _(" ARM-specific assembler options:\n")); |
| |
| for (opt = arm_opts; opt->option != NULL; opt++) |
| if (opt->help != NULL) |
| fprintf (fp, " -%-23s%s\n", opt->option, _(opt->help)); |
| |
| for (lopt = arm_long_opts; lopt->option != NULL; lopt++) |
| if (lopt->help != NULL) |
| fprintf (fp, " -%s%s\n", lopt->option, _(lopt->help)); |
| |
| #ifdef OPTION_EB |
| fprintf (fp, _("\ |
| -EB assemble code for a big-endian cpu\n")); |
| #endif |
| |
| #ifdef OPTION_EL |
| fprintf (fp, _("\ |
| -EL assemble code for a little-endian cpu\n")); |
| #endif |
| } |
| |
| /* We need to be able to fix up arbitrary expressions in some statements. |
| This is so that we can handle symbols that are an arbitrary distance from |
| the pc. The most common cases are of the form ((+/-sym -/+ . - 8) & mask), |
| which returns part of an address in a form which will be valid for |
| a data instruction. We do this by pushing the expression into a symbol |
| in the expr_section, and creating a fix for that. */ |
| |
| static void |
| fix_new_arm (frag, where, size, exp, pc_rel, reloc) |
| fragS * frag; |
| int where; |
| short int size; |
| expressionS * exp; |
| int pc_rel; |
| int reloc; |
| { |
| fixS * new_fix; |
| arm_fix_data * arm_data; |
| |
| switch (exp->X_op) |
| { |
| case O_constant: |
| case O_symbol: |
| case O_add: |
| case O_subtract: |
| new_fix = fix_new_exp (frag, where, size, exp, pc_rel, reloc); |
| break; |
| |
| default: |
| new_fix = fix_new (frag, where, size, make_expr_symbol (exp), 0, |
| pc_rel, reloc); |
| break; |
| } |
| |
| /* Mark whether the fix is to a THUMB instruction, or an ARM |
| instruction. */ |
| arm_data = (arm_fix_data *) obstack_alloc (& notes, sizeof (arm_fix_data)); |
| new_fix->tc_fix_data = (PTR) arm_data; |
| arm_data->thumb_mode = thumb_mode; |
| |
| return; |
| } |
| |
| /* This fix_new is called by cons via TC_CONS_FIX_NEW. */ |
| |
| void |
| cons_fix_new_arm (frag, where, size, exp) |
| fragS * frag; |
| int where; |
| int size; |
| expressionS * exp; |
| { |
| bfd_reloc_code_real_type type; |
| int pcrel = 0; |
| |
| /* Pick a reloc. |
| FIXME: @@ Should look at CPU word size. */ |
| switch (size) |
| { |
| case 1: |
| type = BFD_RELOC_8; |
| break; |
| case 2: |
| type = BFD_RELOC_16; |
| break; |
| case 4: |
| default: |
| type = BFD_RELOC_32; |
| break; |
| case 8: |
| type = BFD_RELOC_64; |
| break; |
| } |
| |
| fix_new_exp (frag, where, (int) size, exp, pcrel, type); |
| } |
| |
| /* A good place to do this, although this was probably not intended |
| for this kind of use. We need to dump the literal pool before |
| references are made to a null symbol pointer. */ |
| |
| void |
| arm_cleanup () |
| { |
| literal_pool * pool; |
| |
| for (pool = list_of_pools; pool; pool = pool->next) |
| { |
| /* Put it at the end of the relevent section. */ |
| subseg_set (pool->section, pool->sub_section); |
| s_ltorg (0); |
| } |
| } |
| |
| void |
| arm_start_line_hook () |
| { |
| last_label_seen = NULL; |
| } |
| |
| void |
| arm_frob_label (sym) |
| symbolS * sym; |
| { |
| last_label_seen = sym; |
| |
| ARM_SET_THUMB (sym, thumb_mode); |
| |
| #if defined OBJ_COFF || defined OBJ_ELF |
| ARM_SET_INTERWORK (sym, support_interwork); |
| #endif |
| |
| /* Note - do not allow local symbols (.Lxxx) to be labeled |
| as Thumb functions. This is because these labels, whilst |
| they exist inside Thumb code, are not the entry points for |
| possible ARM->Thumb calls. Also, these labels can be used |
| as part of a computed goto or switch statement. eg gcc |
| can generate code that looks like this: |
| |
| ldr r2, [pc, .Laaa] |
| lsl r3, r3, #2 |
| ldr r2, [r3, r2] |
| mov pc, r2 |
| |
| .Lbbb: .word .Lxxx |
| .Lccc: .word .Lyyy |
| ..etc... |
| .Laaa: .word Lbbb |
| |
| The first instruction loads the address of the jump table. |
| The second instruction converts a table index into a byte offset. |
| The third instruction gets the jump address out of the table. |
| The fourth instruction performs the jump. |
| |
| If the address stored at .Laaa is that of a symbol which has the |
| Thumb_Func bit set, then the linker will arrange for this address |
| to have the bottom bit set, which in turn would mean that the |
| address computation performed by the third instruction would end |
| up with the bottom bit set. Since the ARM is capable of unaligned |
| word loads, the instruction would then load the incorrect address |
| out of the jump table, and chaos would ensue. */ |
| if (label_is_thumb_function_name |
| && (S_GET_NAME (sym)[0] != '.' || S_GET_NAME (sym)[1] != 'L') |
| && (bfd_get_section_flags (stdoutput, now_seg) & SEC_CODE) != 0) |
| { |
| /* When the address of a Thumb function is taken the bottom |
| bit of that address should be set. This will allow |
| interworking between Arm and Thumb functions to work |
| correctly. */ |
| |
| THUMB_SET_FUNC (sym, 1); |
| |
| label_is_thumb_function_name = FALSE; |
| } |
| } |
| |
| /* Adjust the symbol table. This marks Thumb symbols as distinct from |
| ARM ones. */ |
| |
| void |
| arm_adjust_symtab () |
| { |
| #ifdef OBJ_COFF |
| symbolS * sym; |
| |
| for (sym = symbol_rootP; sym != NULL; sym = symbol_next (sym)) |
| { |
| if (ARM_IS_THUMB (sym)) |
| { |
| if (THUMB_IS_FUNC (sym)) |
| { |
| /* Mark the symbol as a Thumb function. */ |
| if ( S_GET_STORAGE_CLASS (sym) == C_STAT |
| || S_GET_STORAGE_CLASS (sym) == C_LABEL) /* This can happen! */ |
| S_SET_STORAGE_CLASS (sym, C_THUMBSTATFUNC); |
| |
| else if (S_GET_STORAGE_CLASS (sym) == C_EXT) |
| S_SET_STORAGE_CLASS (sym, C_THUMBEXTFUNC); |
| else |
| as_bad (_("%s: unexpected function type: %d"), |
| S_GET_NAME (sym), S_GET_STORAGE_CLASS (sym)); |
| } |
| else switch (S_GET_STORAGE_CLASS (sym)) |
| { |
| case C_EXT: |
| S_SET_STORAGE_CLASS (sym, C_THUMBEXT); |
| break; |
| case C_STAT: |
| S_SET_STORAGE_CLASS (sym, C_THUMBSTAT); |
| break; |
| case C_LABEL: |
| S_SET_STORAGE_CLASS (sym, C_THUMBLABEL); |
| break; |
| default: |
| /* Do nothing. */ |
| break; |
| } |
| } |
| |
| if (ARM_IS_INTERWORK (sym)) |
| coffsymbol (symbol_get_bfdsym (sym))->native->u.syment.n_flags = 0xFF; |
| } |
| #endif |
| #ifdef OBJ_ELF |
| symbolS * sym; |
| char bind; |
| |
| for (sym = symbol_rootP; sym != NULL; sym = symbol_next (sym)) |
| { |
| if (ARM_IS_THUMB (sym)) |
| { |
| elf_symbol_type * elf_sym; |
| |
| elf_sym = elf_symbol (symbol_get_bfdsym (sym)); |
| bind = ELF_ST_BIND (elf_sym); |
| |
| /* If it's a .thumb_func, declare it as so, |
| otherwise tag label as .code 16. */ |
| if (THUMB_IS_FUNC (sym)) |
| elf_sym->internal_elf_sym.st_info = |
| ELF_ST_INFO (bind, STT_ARM_TFUNC); |
| else |
| elf_sym->internal_elf_sym.st_info = |
| ELF_ST_INFO (bind, STT_ARM_16BIT); |
| } |
| } |
| #endif |
| } |
| |
| int |
| arm_data_in_code () |
| { |
| if (thumb_mode && ! strncmp (input_line_pointer + 1, "data:", 5)) |
| { |
| *input_line_pointer = '/'; |
| input_line_pointer += 5; |
| *input_line_pointer = 0; |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| char * |
| arm_canonicalize_symbol_name (name) |
| char * name; |
| { |
| int len; |
| |
| if (thumb_mode && (len = strlen (name)) > 5 |
| && streq (name + len - 5, "/data")) |
| *(name + len - 5) = 0; |
| |
| return name; |
| } |
| |
| #if defined OBJ_COFF || defined OBJ_ELF |
| void |
| arm_validate_fix (fixP) |
| fixS * fixP; |
| { |
| /* If the destination of the branch is a defined symbol which does not have |
| the THUMB_FUNC attribute, then we must be calling a function which has |
| the (interfacearm) attribute. We look for the Thumb entry point to that |
| function and change the branch to refer to that function instead. */ |
| if (fixP->fx_r_type == BFD_RELOC_THUMB_PCREL_BRANCH23 |
| && fixP->fx_addsy != NULL |
| && S_IS_DEFINED (fixP->fx_addsy) |
| && ! THUMB_IS_FUNC (fixP->fx_addsy)) |
| { |
| fixP->fx_addsy = find_real_start (fixP->fx_addsy); |
| } |
| } |
| #endif |
| |
| int |
| arm_force_relocation (fixp) |
| struct fix * fixp; |
| { |
| #if defined (OBJ_COFF) && defined (TE_PE) |
| if (fixp->fx_r_type == BFD_RELOC_RVA) |
| return 1; |
| #endif |
| #ifdef OBJ_ELF |
| if ( fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT |
| || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY |
| || fixp->fx_r_type == BFD_RELOC_ARM_PCREL_BRANCH |
| || fixp->fx_r_type == BFD_RELOC_ARM_PCREL_BLX |
| || fixp->fx_r_type == BFD_RELOC_THUMB_PCREL_BLX |
| || fixp->fx_r_type == BFD_RELOC_THUMB_PCREL_BRANCH23) |
| return 1; |
| #endif |
| |
| /* Resolve these relocations even if the symbol is extern or weak. */ |
| if (fixp->fx_r_type == BFD_RELOC_ARM_IMMEDIATE |
| || fixp->fx_r_type == BFD_RELOC_ARM_ADRL_IMMEDIATE) |
| return 0; |
| |
| return S_FORCE_RELOC (fixp->fx_addsy); |
| } |
| |
| #ifdef OBJ_COFF |
| /* This is a little hack to help the gas/arm/adrl.s test. It prevents |
| local labels from being added to the output symbol table when they |
| are used with the ADRL pseudo op. The ADRL relocation should always |
| be resolved before the binbary is emitted, so it is safe to say that |
| it is adjustable. */ |
| |
| bfd_boolean |
| arm_fix_adjustable (fixP) |
| fixS * fixP; |
| { |
| if (fixP->fx_r_type == BFD_RELOC_ARM_ADRL_IMMEDIATE) |
| return 1; |
| return 0; |
| } |
| #endif |
| |
| #ifdef OBJ_ELF |
| /* Relocations against Thumb function names must be left unadjusted, |
| so that the linker can use this information to correctly set the |
| bottom bit of their addresses. The MIPS version of this function |
| also prevents relocations that are mips-16 specific, but I do not |
| know why it does this. |
| |
| FIXME: |
| There is one other problem that ought to be addressed here, but |
| which currently is not: Taking the address of a label (rather |
| than a function) and then later jumping to that address. Such |
| addresses also ought to have their bottom bit set (assuming that |
| they reside in Thumb code), but at the moment they will not. */ |
| |
| bfd_boolean |
| arm_fix_adjustable (fixP) |
| fixS * fixP; |
| { |
| if (fixP->fx_addsy == NULL) |
| return 1; |
| |
| if (THUMB_IS_FUNC (fixP->fx_addsy) |
| && fixP->fx_subsy == NULL) |
| return 0; |
| |
| /* We need the symbol name for the VTABLE entries. */ |
| if ( fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT |
| || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY) |
| return 0; |
| |
| /* Don't allow symbols to be discarded on GOT related relocs. */ |
| if (fixP->fx_r_type == BFD_RELOC_ARM_PLT32 |
| || fixP->fx_r_type == BFD_RELOC_ARM_GOT32 |
| || fixP->fx_r_type == BFD_RELOC_ARM_GOTOFF) |
| return 0; |
| |
| return 1; |
| } |
| |
| const char * |
| elf32_arm_target_format () |
| { |
| if (target_big_endian) |
| { |
| if (target_oabi) |
| return "elf32-bigarm-oabi"; |
| else |
| return "elf32-bigarm"; |
| } |
| else |
| { |
| if (target_oabi) |
| return "elf32-littlearm-oabi"; |
| else |
| return "elf32-littlearm"; |
| } |
| } |
| |
| void |
| armelf_frob_symbol (symp, puntp) |
| symbolS * symp; |
| int * puntp; |
| { |
| elf_frob_symbol (symp, puntp); |
| } |
| |
| static bfd_reloc_code_real_type |
| arm_parse_reloc () |
| { |
| char id [16]; |
| char * ip; |
| unsigned int i; |
| static struct |
| { |
| char * str; |
| int len; |
| bfd_reloc_code_real_type reloc; |
| } |
| reloc_map[] = |
| { |
| #define MAP(str,reloc) { str, sizeof (str) - 1, reloc } |
| MAP ("(got)", BFD_RELOC_ARM_GOT32), |
| MAP ("(gotoff)", BFD_RELOC_ARM_GOTOFF), |
| /* ScottB: Jan 30, 1998 - Added support for parsing "var(PLT)" |
| branch instructions generated by GCC for PLT relocs. */ |
| MAP ("(plt)", BFD_RELOC_ARM_PLT32), |
| { NULL, 0, BFD_RELOC_UNUSED } |
| #undef MAP |
| }; |
| |
| for (i = 0, ip = input_line_pointer; |
| i < sizeof (id) && (ISALNUM (*ip) || ISPUNCT (*ip)); |
| i++, ip++) |
| id[i] = TOLOWER (*ip); |
| |
| for (i = 0; reloc_map[i].str; i++) |
| if (strncmp (id, reloc_map[i].str, reloc_map[i].len) == 0) |
| break; |
| |
| input_line_pointer += reloc_map[i].len; |
| |
| return reloc_map[i].reloc; |
| } |
| |
| static void |
| s_arm_elf_cons (nbytes) |
| int nbytes; |
| { |
| expressionS exp; |
| |
| #ifdef md_flush_pending_output |
| md_flush_pending_output (); |
| #endif |
| |
| if (is_it_end_of_statement ()) |
| { |
| demand_empty_rest_of_line (); |
| return; |
| } |
| |
| #ifdef md_cons_align |
| md_cons_align (nbytes); |
| #endif |
| |
| do |
| { |
| bfd_reloc_code_real_type reloc; |
| |
| expression (& exp); |
| |
| if (exp.X_op == O_symbol |
| && * input_line_pointer == '(' |
| && (reloc = arm_parse_reloc ()) != BFD_RELOC_UNUSED) |
| { |
| reloc_howto_type *howto = bfd_reloc_type_lookup (stdoutput, reloc); |
| int size = bfd_get_reloc_size (howto); |
| |
| if (size > nbytes) |
| as_bad ("%s relocations do not fit in %d bytes", |
| howto->name, nbytes); |
| else |
| { |
| register char *p = frag_more ((int) nbytes); |
| int offset = nbytes - size; |
| |
| fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size, |
| &exp, 0, reloc); |
| } |
| } |
| else |
| emit_expr (&exp, (unsigned int) nbytes); |
| } |
| while (*input_line_pointer++ == ','); |
| |
| /* Put terminator back into stream. */ |
| input_line_pointer --; |
| demand_empty_rest_of_line (); |
| } |
| |
| #endif /* OBJ_ELF */ |
| |
| /* This is called from HANDLE_ALIGN in write.c. Fill in the contents |
| of an rs_align_code fragment. */ |
| |
| void |
| arm_handle_align (fragP) |
| fragS *fragP; |
| { |
| static char const arm_noop[4] = { 0x00, 0x00, 0xa0, 0xe1 }; |
| static char const thumb_noop[2] = { 0xc0, 0x46 }; |
| static char const arm_bigend_noop[4] = { 0xe1, 0xa0, 0x00, 0x00 }; |
| static char const thumb_bigend_noop[2] = { 0x46, 0xc0 }; |
| |
| int bytes, fix, noop_size; |
| char * p; |
| const char * noop; |
| |
| if (fragP->fr_type != rs_align_code) |
| return; |
| |
| bytes = fragP->fr_next->fr_address - fragP->fr_address - fragP->fr_fix; |
| p = fragP->fr_literal + fragP->fr_fix; |
| fix = 0; |
| |
| if (bytes > MAX_MEM_FOR_RS_ALIGN_CODE) |
| bytes &= MAX_MEM_FOR_RS_ALIGN_CODE; |
| |
| if (fragP->tc_frag_data) |
| { |
| if (target_big_endian) |
| noop = thumb_bigend_noop; |
| else |
| noop = thumb_noop; |
| noop_size = sizeof (thumb_noop); |
| } |
| else |
| { |
| if (target_big_endian) |
| noop = arm_bigend_noop; |
| else |
| noop = arm_noop; |
| noop_size = sizeof (arm_noop); |
| } |
| |
| if (bytes & (noop_size - 1)) |
| { |
| fix = bytes & (noop_size - 1); |
| memset (p, 0, fix); |
| p += fix; |
| bytes -= fix; |
| } |
| |
| while (bytes >= noop_size) |
| { |
| memcpy (p, noop, noop_size); |
| p += noop_size; |
| bytes -= noop_size; |
| fix += noop_size; |
| } |
| |
| fragP->fr_fix += fix; |
| fragP->fr_var = noop_size; |
| } |
| |
| /* Called from md_do_align. Used to create an alignment |
| frag in a code section. */ |
| |
| void |
| arm_frag_align_code (n, max) |
| int n; |
| int max; |
| { |
| char * p; |
| |
| /* We assume that there will never be a requirment |
| to support alignments greater than 32 bytes. */ |
| if (max > MAX_MEM_FOR_RS_ALIGN_CODE) |
| as_fatal (_("alignments greater than 32 bytes not supported in .text sections.")); |
| |
| p = frag_var (rs_align_code, |
| MAX_MEM_FOR_RS_ALIGN_CODE, |
| 1, |
| (relax_substateT) max, |
| (symbolS *) NULL, |
| (offsetT) n, |
| (char *) NULL); |
| *p = 0; |
| |
| } |
| |
| /* Perform target specific initialisation of a frag. */ |
| |
| void |
| arm_init_frag (fragP) |
| fragS *fragP; |
| { |
| /* Record whether this frag is in an ARM or a THUMB area. */ |
| fragP->tc_frag_data = thumb_mode; |
| } |