/* GDB routines for manipulating objfiles.

   Copyright (C) 1992-2025 Free Software Foundation, Inc.

   Contributed by Cygnus Support, using pieces from other GDB modules.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

/* This file contains support routines for creating, manipulating, and
   destroying objfile structures.  */

#include "bfd.h"
#include "symtab.h"
#include "symfile.h"
#include "objfiles.h"
#include "target.h"
#include "expression.h"
#include "parser-defs.h"

#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include "gdbsupport/gdb_obstack.h"

#include "breakpoint.h"
#include "block.h"
#include "dictionary.h"
#include "source.h"
#include "addrmap.h"
#include "arch-utils.h"
#include "exec.h"
#include "observable.h"
#include "complaints.h"
#include "gdb_bfd.h"
#include "btrace.h"
#include "gdbsupport/pathstuff.h"

#include <algorithm>

/* Externally visible variables that are owned by this module.
   See declarations in objfile.h for more info.  */

struct objfile_pspace_info
{
  objfile_pspace_info () = default;
  ~objfile_pspace_info ();

  struct obj_section **sections = nullptr;
  int num_sections = 0;

  /* Nonzero if object files have been added since the section map
     was last updated.  */
  int new_objfiles_available = 0;

  /* Nonzero if the section map MUST be updated before use.  */
  int section_map_dirty = 0;

  /* Nonzero if section map updates should be inhibited if possible.  */
  int inhibit_updates = 0;
};

/* Per-program-space data key.  */
static const registry<program_space>::key<objfile_pspace_info>
  objfiles_pspace_data;

objfile_pspace_info::~objfile_pspace_info ()
{
  xfree (sections);
}

/* Get the current svr4 data.  If none is found yet, add it now.  This
   function always returns a valid object.  */

static struct objfile_pspace_info *
get_objfile_pspace_data (struct program_space *pspace)
{
  struct objfile_pspace_info *info;

  info = objfiles_pspace_data.get (pspace);
  if (info == NULL)
    info = objfiles_pspace_data.emplace (pspace);

  return info;
}


/* Per-BFD data key.  */

static const registry<bfd>::key<objfile_per_bfd_storage> objfiles_bfd_data;

objfile_per_bfd_storage::~objfile_per_bfd_storage ()
{
}

/* Create the per-BFD storage object for OBJFILE.  If ABFD is not
   NULL, and it already has a per-BFD storage object, use that.
   Otherwise, allocate a new per-BFD storage object.  */

void
set_objfile_per_bfd (struct objfile *objfile)
{
  bfd *abfd = objfile->obfd.get ();
  struct objfile_per_bfd_storage *storage = NULL;

  if (abfd != NULL)
    storage = objfiles_bfd_data.get (abfd);

  if (storage == NULL)
    {
      storage = new objfile_per_bfd_storage (abfd);
      /* If the object requires gdb to do relocations, we simply fall
	 back to not sharing data across users.  These cases are rare
	 enough that this seems reasonable.  */
      if (abfd != NULL && !gdb_bfd_requires_relocations (abfd))
	objfiles_bfd_data.set (abfd, storage);
      else
	objfile->per_bfd_storage.reset (storage);

      /* Look up the gdbarch associated with the BFD.  */
      if (abfd != NULL)
	storage->gdbarch = gdbarch_from_bfd (abfd);
    }

  objfile->per_bfd = storage;
}

/* Set the objfile's per-BFD notion of the "main" name and
   language.  */

void
set_objfile_main_name (struct objfile *objfile,
		       const char *name, enum language lang)
{
  if (objfile->per_bfd->name_of_main == NULL
      || strcmp (objfile->per_bfd->name_of_main, name) != 0)
    objfile->per_bfd->name_of_main
      = obstack_strdup (&objfile->per_bfd->storage_obstack, name);
  objfile->per_bfd->language_of_main = lang;
}

/* Register STATIC_LINK as the static link for BLOCK, which is part of OBJFILE.
   Must not be called more than once for each BLOCK.  */

void
objfile_register_static_link (struct objfile *objfile,
			      const struct block *block,
			      const struct dynamic_prop *static_link)
{
  /* Enter the mapping and make sure it's the first mapping for this
     block.  */
  bool inserted = objfile->static_links.emplace (block, static_link).second;
  gdb_assert (inserted);
}

/* Look for a static link for BLOCK, which is part of OBJFILE.  Return NULL if
   none was found.  */

const struct dynamic_prop *
objfile_lookup_static_link (struct objfile *objfile,
			    const struct block *block)
{
  if (auto iter = objfile->static_links.find (block);
      iter != objfile->static_links.end ())
    return iter->second;

  return nullptr;
}


/* Build up the section table that the objfile references.  The
   objfile contains pointers to the start of the table
   (objfile->sections) and to the first location after the end of the
   table (objfile->sections_end).  */

static void
add_to_objfile_sections (struct bfd *abfd, struct bfd_section *asect,
			 struct objfile *objfile, int force)
{
  struct obj_section *section;

  if (!force)
    {
      flagword aflag;

      aflag = bfd_section_flags (asect);
      if (!(aflag & SEC_ALLOC))
	return;
    }

  section = &objfile->sections_start[gdb_bfd_section_index (abfd, asect)];
  section->objfile = objfile;
  section->the_bfd_section = asect;
  section->ovly_mapped = 0;
}

/* Builds a section table for OBJFILE.

   Note that the OFFSET and OVLY_MAPPED in each table entry are
   initialized to zero.  */

void
build_objfile_section_table (struct objfile *objfile)
{
  int count = gdb_bfd_count_sections (objfile->obfd.get ());

  objfile->sections_start = OBSTACK_CALLOC (&objfile->objfile_obstack,
					    count,
					    struct obj_section);
  objfile->sections_end = (objfile->sections_start + count);
  for (asection *sect : gdb_bfd_sections (objfile->obfd))
    add_to_objfile_sections (objfile->obfd.get (), sect, objfile, 0);

  /* See gdb_bfd_section_index.  */
  add_to_objfile_sections (objfile->obfd.get (), bfd_com_section_ptr,
			   objfile, 1);
  add_to_objfile_sections (objfile->obfd.get (), bfd_und_section_ptr,
			   objfile, 1);
  add_to_objfile_sections (objfile->obfd.get (), bfd_abs_section_ptr,
			   objfile, 1);
  add_to_objfile_sections (objfile->obfd.get (), bfd_ind_section_ptr,
			   objfile, 1);
}

/* Given a pointer to an initialized bfd (ABFD) and some flag bits,
   initialize the new objfile as best we can and link it into the list
   of all known objfiles.

   NAME should contain original non-canonicalized filename or other
   identifier as entered by user.  If there is no better source use
   bfd_get_filename (ABFD).  NAME may be NULL only if ABFD is NULL.
   NAME content is copied into returned objfile.

   The FLAGS word contains various bits (OBJF_*) that can be taken as
   requests for specific operations.  Other bits like OBJF_SHARED are
   simply copied through to the new objfile flags member.  */

objfile::objfile (gdb_bfd_ref_ptr bfd_, program_space *pspace,
		  const char *name, objfile_flags flags_)
  : flags (flags_),
    m_pspace (pspace),
    obfd (std::move (bfd_))
{
  const char *expanded_name;

  std::string name_holder;
  if (name == NULL)
    {
      gdb_assert (obfd == nullptr);
      gdb_assert ((flags & OBJF_NOT_FILENAME) != 0);
      expanded_name = "<<anonymous objfile>>";
    }
  else if ((flags & OBJF_NOT_FILENAME) != 0
	   || is_target_filename (name))
    expanded_name = name;
  else
    {
      name_holder = gdb_abspath (name);
      expanded_name = name_holder.c_str ();
    }
  original_name = obstack_strdup (&objfile_obstack, expanded_name);

  /* Update the per-objfile information that comes from the bfd, ensuring
     that any data that is reference is saved in the per-objfile data
     region.  */

  if (obfd != nullptr)
    {
      mtime = gdb_bfd_get_mtime (obfd.get ());

      /* Build section table.  */
      build_objfile_section_table (this);
    }

  set_objfile_per_bfd (this);
}

/* See objfiles.h.  */

int
entry_point_address_query (program_space *pspace, CORE_ADDR *entry_p)
{
  objfile *objf = pspace->symfile_object_file;
  if (objf == NULL || !objf->per_bfd->ei.entry_point_p)
    return 0;

  int idx = objf->per_bfd->ei.the_bfd_section_index;
  *entry_p = objf->per_bfd->ei.entry_point + objf->section_offsets[idx];

  return 1;
}

/* See objfiles.h.  */

CORE_ADDR
entry_point_address (program_space *pspace)
{
  CORE_ADDR retval;

  if (!entry_point_address_query (pspace, &retval))
    error (_("Entry point address is not known."));

  return retval;
}

separate_debug_iterator &
separate_debug_iterator::operator++ ()
{
  gdb_assert (m_objfile != nullptr);

  struct objfile *res;

  /* If any, return the first child.  */
  res = m_objfile->separate_debug_objfile;
  if (res != nullptr)
    {
      m_objfile = res;
      return *this;
    }

  /* Common case where there is no separate debug objfile.  */
  if (m_objfile == m_parent)
    {
      m_objfile = nullptr;
      return *this;
    }

  /* Return the brother if any.  Note that we don't iterate on brothers of
     the parents.  */
  res = m_objfile->separate_debug_objfile_link;
  if (res != nullptr)
    {
      m_objfile = res;
      return *this;
    }

  for (res = m_objfile->separate_debug_objfile_backlink;
       res != m_parent;
       res = res->separate_debug_objfile_backlink)
    {
      gdb_assert (res != nullptr);
      if (res->separate_debug_objfile_link != nullptr)
	{
	  m_objfile = res->separate_debug_objfile_link;
	  return *this;
	}
    }
  m_objfile = nullptr;
  return *this;
}

/* Add OBJFILE as a separate debug objfile of PARENT.  */

static void
add_separate_debug_objfile (struct objfile *objfile, struct objfile *parent)
{
  gdb_assert (objfile && parent);

  /* Must not be already in a list.  */
  gdb_assert (objfile->separate_debug_objfile_backlink == NULL);
  gdb_assert (objfile->separate_debug_objfile_link == NULL);
  gdb_assert (objfile->separate_debug_objfile == NULL);
  gdb_assert (parent->separate_debug_objfile_backlink == NULL);
  gdb_assert (parent->separate_debug_objfile_link == NULL);

  objfile->separate_debug_objfile_backlink = parent;
  objfile->separate_debug_objfile_link = parent->separate_debug_objfile;
  parent->separate_debug_objfile = objfile;
}

/* See objfiles.h.  */

objfile *
objfile::make (gdb_bfd_ref_ptr bfd_, program_space *pspace, const char *name_,
	       objfile_flags flags_, objfile *parent)
{
  objfile *result = new objfile (std::move (bfd_), pspace, name_, flags_);
  if (parent != nullptr)
    add_separate_debug_objfile (result, parent);

  pspace->add_objfile (std::unique_ptr<objfile> (result), parent);

  /* Rebuild section map next time we need it.  */
  get_objfile_pspace_data (pspace)->new_objfiles_available = 1;

  return result;
}

/* See objfiles.h.  */

void
objfile::unlink ()
{
  this->pspace ()->remove_objfile (this);
}

/* Free all separate debug objfile of OBJFILE, but don't free OBJFILE
   itself.  */

void
free_objfile_separate_debug (struct objfile *objfile)
{
  struct objfile *child;

  for (child = objfile->separate_debug_objfile; child;)
    {
      struct objfile *next_child = child->separate_debug_objfile_link;
      child->unlink ();
      child = next_child;
    }
}

/* Destroy an objfile and all the symtabs and psymtabs under it.  */

objfile::~objfile ()
{
  /* First notify observers that this objfile is about to be freed.  */
  gdb::observers::free_objfile.notify (this);

  /* Free all separate debug objfiles.  */
  free_objfile_separate_debug (this);

  if (separate_debug_objfile_backlink)
    {
      /* We freed the separate debug file, make sure the base objfile
	 doesn't reference it.  */
      struct objfile *child;

      child = separate_debug_objfile_backlink->separate_debug_objfile;

      if (child == this)
	{
	  /* THIS is the first child.  */
	  separate_debug_objfile_backlink->separate_debug_objfile =
	    separate_debug_objfile_link;
	}
      else
	{
	  /* Find THIS in the list.  */
	  while (1)
	    {
	      if (child->separate_debug_objfile_link == this)
		{
		  child->separate_debug_objfile_link =
		    separate_debug_objfile_link;
		  break;
		}
	      child = child->separate_debug_objfile_link;
	      gdb_assert (child);
	    }
	}
    }

  /* Remove any references to this objfile in the global value
     lists.  */
  preserve_values (this);

  /* It still may reference data modules have associated with the objfile and
     the symbol file data.  */
  forget_cached_source_info ();
  for (compunit_symtab *cu : compunits ())
    cu->finalize ();

  breakpoint_free_objfile (this);
  btrace_free_objfile (this);

  /* First do any symbol file specific actions required when we are
     finished with a particular symbol file.  Note that if the objfile
     is using reusable symbol information (via mmalloc) then each of
     these routines is responsible for doing the correct thing, either
     freeing things which are valid only during this particular gdb
     execution, or leaving them to be reused during the next one.  */

  if (sf != NULL)
    (*sf->sym_finish) (this);

  /* Before the symbol table code was redone to make it easier to
     selectively load and remove information particular to a specific
     linkage unit, gdb used to do these things whenever the monolithic
     symbol table was blown away.  How much still needs to be done
     is unknown, but we play it safe for now and keep each action until
     it is shown to be no longer needed.  */

  /* Not all our callers call clear_symtab_users (objfile_purge_solibs,
     for example), so we need to call this here.  */
  clear_pc_function_cache ();

  /* Check to see if the current_source_symtab belongs to this objfile,
     and if so, call clear_current_source_symtab_and_line.  */
  clear_current_source_symtab_and_line (this);

  /* Rebuild section map next time we need it.  */
  auto info = objfiles_pspace_data.get (pspace ());
  if (info != nullptr)
    info->section_map_dirty = 1;
}


/* A helper function for objfile_relocate1 that relocates a single
   symbol.  */

static void
relocate_one_symbol (struct symbol *sym, struct objfile *objfile,
		     const section_offsets &delta)
{
  /* The RS6000 code from which this was taken skipped
     any symbols in STRUCT_DOMAIN or UNDEF_DOMAIN.
     But I'm leaving out that test, on the theory that
     they can't possibly pass the tests below.  */
  if ((sym->loc_class () == LOC_LABEL
       || sym->loc_class () == LOC_STATIC)
      && sym->section_index () >= 0)
    sym->set_value_address (sym->value_address ()
			    + delta[sym->section_index ()]);
}

/* Relocate OBJFILE to NEW_OFFSETS.  There should be OBJFILE->NUM_SECTIONS
   entries in new_offsets.  SEPARATE_DEBUG_OBJFILE is not touched here.
   Return non-zero iff any change happened.  */

static int
objfile_relocate1 (struct objfile *objfile, 
		   const section_offsets &new_offsets)
{
  section_offsets delta (objfile->section_offsets.size ());

  int something_changed = 0;

  for (int i = 0; i < objfile->section_offsets.size (); ++i)
    {
      delta[i] = new_offsets[i] - objfile->section_offsets[i];
      if (delta[i] != 0)
	something_changed = 1;
    }
  if (!something_changed)
    return 0;

  /* OK, get all the symtabs.  */
  for (compunit_symtab *cust : objfile->compunits ())
    {
      struct blockvector *bv = cust->blockvector ();
      int block_line_section = SECT_OFF_TEXT (objfile);

      if (bv->map () != nullptr)
	bv->map ()->relocate (delta[block_line_section]);

      for (block *b : bv->blocks ())
	{
	  b->set_start (b->start () + delta[block_line_section]);
	  b->set_end (b->end () + delta[block_line_section]);

	  for (blockrange &r : b->ranges ())
	    {
	      r.set_start (r.start () + delta[block_line_section]);
	      r.set_end (r.end () + delta[block_line_section]);
	    }

	  /* We only want to iterate over the local symbols, not any
	     symbols in included symtabs.  */
	  for (struct symbol *sym : b->multidict_symbols ())
	    relocate_one_symbol (sym, objfile, delta);
	}
    }

  /* Relocate isolated symbols.  */
  for (symbol *iter = objfile->template_symbols; iter; iter = iter->hash_next)
    relocate_one_symbol (iter, objfile, delta);

  for (int i = 0; i < objfile->section_offsets.size (); ++i)
    objfile->section_offsets[i] = new_offsets[i];

  /* Rebuild section map next time we need it.  */
  get_objfile_pspace_data (objfile->pspace ())->section_map_dirty = 1;

  /* Update the table in exec_ops, used to read memory.  */
  for (obj_section &s : objfile->sections ())
    {
      int idx = &s - objfile->sections_start;

      exec_set_section_address (bfd_get_filename (objfile->obfd.get ()), idx,
				s.addr ());
    }

  /* Data changed.  */
  return 1;
}

/* Relocate OBJFILE to NEW_OFFSETS.  There should be OBJFILE->NUM_SECTIONS
   entries in new_offsets.  Process also OBJFILE's SEPARATE_DEBUG_OBJFILEs.

   The number and ordering of sections does differ between the two objfiles.
   Only their names match.  Also the file offsets will differ (objfile being
   possibly prelinked but separate_debug_objfile is probably not prelinked) but
   the in-memory absolute address as specified by NEW_OFFSETS must match both
   files.  */

void
objfile_relocate (struct objfile *objfile,
		  const section_offsets &new_offsets)
{
  int changed = 0;

  changed |= objfile_relocate1 (objfile, new_offsets);

  for (::objfile *debug_objfile : objfile->separate_debug_objfiles ())
    {
      if (debug_objfile == objfile)
	continue;

      section_addr_info objfile_addrs
	= build_section_addr_info_from_objfile (objfile);

      /* Here OBJFILE_ADDRS contain the correct absolute addresses, the
	 relative ones must be already created according to debug_objfile.  */

      addr_info_make_relative (&objfile_addrs, debug_objfile->obfd.get ());

      gdb_assert (debug_objfile->section_offsets.size ()
		  == gdb_bfd_count_sections (debug_objfile->obfd.get ()));
      section_offsets new_debug_offsets
	(debug_objfile->section_offsets.size ());
      relative_addr_info_to_section_offsets (new_debug_offsets, objfile_addrs);

      changed |= objfile_relocate1 (debug_objfile, new_debug_offsets);
    }

  /* Relocate breakpoints as necessary, after things are relocated.  */
  if (changed)
    breakpoint_re_set ();
}

/* Rebase (add to the offsets) OBJFILE by SLIDE.  SEPARATE_DEBUG_OBJFILE is
   not touched here.
   Return non-zero iff any change happened.  */

static int
objfile_rebase1 (struct objfile *objfile, CORE_ADDR slide)
{
  section_offsets new_offsets (objfile->section_offsets.size (), slide);
  return objfile_relocate1 (objfile, new_offsets);
}

/* Rebase (add to the offsets) OBJFILE by SLIDE.  Process also OBJFILE's
   SEPARATE_DEBUG_OBJFILEs.  */

void
objfile_rebase (struct objfile *objfile, CORE_ADDR slide)
{
  int changed = 0;

  for (::objfile *debug_objfile : objfile->separate_debug_objfiles ())
    changed |= objfile_rebase1 (debug_objfile, slide);

  /* Relocate breakpoints as necessary, after things are relocated.  */
  if (changed)
    breakpoint_re_set ();
}

/* See objfiles.h.  */

bool
objfile::has_full_symbols ()
{
  return this->compunit_symtabs != nullptr;
}

/* See objfiles.h.  */

bool
objfile::has_symbols ()
{
  for (::objfile *o : this->separate_debug_objfiles ())
    if (o->has_partial_symbols () || o->has_full_symbols ())
      return true;

  return false;
}

/* See objfiles.h.  */

bool
have_partial_symbols (program_space *pspace)
{
  for (objfile &ofp : pspace->objfiles ())
    if (ofp.has_partial_symbols ())
      return true;

  return false;
}

/* See objfiles.h.  */

bool
have_full_symbols (program_space *pspace)
{
  for (objfile &ofp : pspace->objfiles ())
    if (ofp.has_full_symbols ())
      return true;

  return false;
}


/* See objfiles.h.  */

void
objfile_purge_solibs (program_space *pspace)
{
  for (objfile &objf : pspace->objfiles_safe ())
    {
      /* We assume that the solib package has been purged already, or will
	 be soon.  */

      if (!(objf.flags & OBJF_USERLOADED) && (objf.flags & OBJF_SHARED))
	objf.unlink ();
    }
}

/* See objfiles.h.  */

bool
have_minimal_symbols (program_space *pspace)
{
  for (objfile &ofp : pspace->objfiles ())
    if (ofp.per_bfd->minimal_symbol_count > 0)
      return true;

  return false;
}

/* Qsort comparison function.  */

static bool
sort_cmp (const struct obj_section *sect1, const obj_section *sect2)
{
  const CORE_ADDR sect1_addr = sect1->addr ();
  const CORE_ADDR sect2_addr = sect2->addr ();

  if (sect1_addr < sect2_addr)
    return true;
  else if (sect1_addr > sect2_addr)
    return false;
  else
    {
      /* Sections are at the same address.  This could happen if
	 A) we have an objfile and a separate debuginfo.
	 B) we are confused, and have added sections without proper relocation,
	 or something like that.  */

      const struct objfile *const objfile1 = sect1->objfile;
      const struct objfile *const objfile2 = sect2->objfile;

      if (objfile1->separate_debug_objfile == objfile2
	  || objfile2->separate_debug_objfile == objfile1)
	{
	  /* Case A.  The ordering doesn't matter: separate debuginfo files
	     will be filtered out later.  */

	  return false;
	}

      /* Case B.  Maintain stable sort order, so bugs in GDB are easier to
	 triage.  This section could be slow (since we iterate over all
	 objfiles in each call to sort_cmp), but this shouldn't happen
	 very often (GDB is already in a confused state; one hopes this
	 doesn't happen at all).  If you discover that significant time is
	 spent in the loops below, do 'set complaints 100' and examine the
	 resulting complaints.  */
      if (objfile1 == objfile2)
	{
	  /* Both sections came from the same objfile.  We are really
	     confused.  Sort on sequence order of sections within the
	     objfile.  The order of checks is important here, if we find a
	     match on SECT2 first then either SECT2 is before SECT1, or,
	     SECT2 == SECT1, in both cases we should return false.  The
	     second case shouldn't occur during normal use, but std::sort
	     does check that '!(a < a)' when compiled in debug mode.  */

	  for (const obj_section &osect : objfile1->sections ())
	    if (&osect == sect2)
	      return false;
	    else if (&osect == sect1)
	      return true;

	  /* We should have found one of the sections before getting here.  */
	  gdb_assert_not_reached ("section not found");
	}
      else
	{
	  /* Sort on sequence number of the objfile in the chain.  */

	  for (objfile &objfile : current_program_space->objfiles ())
	    if (&objfile == objfile1)
	      return true;
	    else if (&objfile == objfile2)
	      return false;

	  /* We should have found one of the objfiles before getting here.  */
	  gdb_assert_not_reached ("objfile not found");
	}
    }

  /* Unreachable.  */
  gdb_assert_not_reached ("unexpected code path");
  return false;
}

/* Select "better" obj_section to keep.  We prefer the one that came from
   the real object, rather than the one from separate debuginfo.
   Most of the time the two sections are exactly identical, but with
   prelinking the .rel.dyn section in the real object may have different
   size.  */

static struct obj_section *
preferred_obj_section (struct obj_section *a, struct obj_section *b)
{
  gdb_assert (a->addr () == b->addr ());
  gdb_assert ((a->objfile->separate_debug_objfile == b->objfile)
	      || (b->objfile->separate_debug_objfile == a->objfile));
  gdb_assert ((a->objfile->separate_debug_objfile_backlink == b->objfile)
	      || (b->objfile->separate_debug_objfile_backlink == a->objfile));

  if (a->objfile->separate_debug_objfile != NULL)
    return a;
  return b;
}

/* Return 1 if SECTION should be inserted into the section map.
   We want to insert only non-overlay non-TLS non-empty sections.  */

static int
insert_section_p (const struct bfd *abfd,
		  const struct bfd_section *section)
{
  const bfd_vma lma = bfd_section_lma (section);

  if (overlay_debugging && lma != 0 && lma != bfd_section_vma (section)
      && (bfd_get_file_flags (abfd) & BFD_IN_MEMORY) == 0)
    /* This is an overlay section.  IN_MEMORY check is needed to avoid
       discarding sections from the "system supplied DSO" (aka vdso)
       on some Linux systems (e.g. Fedora 11).  */
    return 0;
  if ((bfd_section_flags (section) & SEC_THREAD_LOCAL) != 0)
    /* This is a TLS section.  */
    return 0;
  if (bfd_section_size (section) == 0)
    {
      /* This is an empty section.  It has no PCs for find_pc_section (), so
	 there is no reason to insert it into the section map.  */
      return 0;
    }

  return 1;
}

/* Filter out overlapping sections where one section came from the real
   objfile, and the other from a separate debuginfo file.
   Return the size of table after redundant sections have been eliminated.  */

static int
filter_debuginfo_sections (struct obj_section **map, int map_size)
{
  int i, j;

  for (i = 0, j = 0; i < map_size - 1; i++)
    {
      struct obj_section *const sect1 = map[i];
      struct obj_section *const sect2 = map[i + 1];
      const struct objfile *const objfile1 = sect1->objfile;
      const struct objfile *const objfile2 = sect2->objfile;
      const CORE_ADDR sect1_addr = sect1->addr ();
      const CORE_ADDR sect2_addr = sect2->addr ();

      if (sect1_addr == sect2_addr
	  && (objfile1->separate_debug_objfile == objfile2
	      || objfile2->separate_debug_objfile == objfile1))
	{
	  map[j++] = preferred_obj_section (sect1, sect2);
	  ++i;
	}
      else
	map[j++] = sect1;
    }

  if (i < map_size)
    {
      gdb_assert (i == map_size - 1);
      map[j++] = map[i];
    }

  /* The map should not have shrunk to less than half the original size.  */
  gdb_assert (map_size / 2 <= j);

  return j;
}

/* Filter out overlapping sections, issuing a warning if any are found.
   Overlapping sections could really be overlay sections which we didn't
   classify as such in insert_section_p, or we could be dealing with a
   corrupt binary.  */

static int
filter_overlapping_sections (struct obj_section **map, int map_size)
{
  int i, j;

  for (i = 0, j = 0; i < map_size - 1; )
    {
      int k;

      map[j++] = map[i];
      for (k = i + 1; k < map_size; k++)
	{
	  struct obj_section *const sect1 = map[i];
	  struct obj_section *const sect2 = map[k];
	  const CORE_ADDR sect1_addr = sect1->addr ();
	  const CORE_ADDR sect2_addr = sect2->addr ();
	  const CORE_ADDR sect1_endaddr = sect1->endaddr ();

	  gdb_assert (sect1_addr <= sect2_addr);

	  if (sect1_endaddr <= sect2_addr)
	    break;
	  else
	    {
	      /* We have an overlap.  Report it.  */

	      struct objfile *const objf1 = sect1->objfile;
	      struct objfile *const objf2 = sect2->objfile;

	      const struct bfd_section *const bfds1 = sect1->the_bfd_section;
	      const struct bfd_section *const bfds2 = sect2->the_bfd_section;

	      const CORE_ADDR sect2_endaddr = sect2->endaddr ();

	      struct gdbarch *const gdbarch = objf1->arch ();

	      complaint (_("unexpected overlap between:\n"
			   " (A) section `%s' from `%s' [%s, %s)\n"
			   " (B) section `%s' from `%s' [%s, %s).\n"
			   "Will ignore section B"),
			 bfd_section_name (bfds1), objfile_name (objf1),
			 paddress (gdbarch, sect1_addr),
			 paddress (gdbarch, sect1_endaddr),
			 bfd_section_name (bfds2), objfile_name (objf2),
			 paddress (gdbarch, sect2_addr),
			 paddress (gdbarch, sect2_endaddr));
	    }
	}
      i = k;
    }

  if (i < map_size)
    {
      gdb_assert (i == map_size - 1);
      map[j++] = map[i];
    }

  return j;
}


/* Update PMAP, PMAP_SIZE with sections from all objfiles, excluding any
   TLS, overlay and overlapping sections.  */

static void
update_section_map (struct program_space *pspace,
		    struct obj_section ***pmap, int *pmap_size)
{
  struct objfile_pspace_info *pspace_info;
  int alloc_size, map_size, i;
  struct obj_section **map;

  pspace_info = get_objfile_pspace_data (pspace);
  gdb_assert (pspace_info->section_map_dirty != 0
	      || pspace_info->new_objfiles_available != 0);

  map = *pmap;
  xfree (map);

  alloc_size = 0;
  for (objfile &objfile : pspace->objfiles ())
    for (obj_section &s : objfile.sections ())
      if (insert_section_p (objfile.obfd.get (), s.the_bfd_section))
	alloc_size += 1;

  /* This happens on detach/attach (e.g. in gdb.base/attach.exp).  */
  if (alloc_size == 0)
    {
      *pmap = NULL;
      *pmap_size = 0;
      return;
    }

  map = XNEWVEC (struct obj_section *, alloc_size);

  i = 0;
  for (objfile &objfile : pspace->objfiles ())
    for (obj_section &s : objfile.sections ())
      if (insert_section_p (objfile.obfd.get (), s.the_bfd_section))
	map[i++] = &s;

  std::sort (map, map + alloc_size, sort_cmp);
  map_size = filter_debuginfo_sections(map, alloc_size);
  map_size = filter_overlapping_sections(map, map_size);

  if (map_size < alloc_size)
    /* Some sections were eliminated.  Trim excess space.  */
    map = XRESIZEVEC (struct obj_section *, map, map_size);
  else
    gdb_assert (alloc_size == map_size);

  *pmap = map;
  *pmap_size = map_size;
}

/* Bsearch comparison function.  */

static int
bsearch_cmp (const void *key, const void *elt)
{
  const CORE_ADDR pc = *(CORE_ADDR *) key;
  const struct obj_section *section = *(const struct obj_section **) elt;

  if (pc < section->addr ())
    return -1;
  if (pc < section->endaddr ())
    return 0;
  return 1;
}

/* Returns a section whose range includes PC or NULL if none found.   */

struct obj_section *
find_pc_section (CORE_ADDR pc)
{
  struct objfile_pspace_info *pspace_info;
  struct obj_section *s, **sp;

  /* Check for mapped overlay section first.  */
  s = find_pc_mapped_section (pc);
  if (s)
    return s;

  pspace_info = get_objfile_pspace_data (current_program_space);
  if (pspace_info->section_map_dirty
      || (pspace_info->new_objfiles_available
	  && !pspace_info->inhibit_updates))
    {
      update_section_map (current_program_space,
			  &pspace_info->sections,
			  &pspace_info->num_sections);

      /* Don't need updates to section map until objfiles are added,
	 removed or relocated.  */
      pspace_info->new_objfiles_available = 0;
      pspace_info->section_map_dirty = 0;
    }

  /* The C standard (ISO/IEC 9899:TC2) requires the BASE argument to
     bsearch be non-NULL.  */
  if (pspace_info->sections == NULL)
    {
      gdb_assert (pspace_info->num_sections == 0);
      return NULL;
    }

  sp = (struct obj_section **) bsearch (&pc,
					pspace_info->sections,
					pspace_info->num_sections,
					sizeof (*pspace_info->sections),
					bsearch_cmp);
  if (sp != NULL)
    return *sp;
  return NULL;
}


/* Return non-zero if PC is in a section called NAME.  */

bool
pc_in_section (CORE_ADDR pc, const char *name)
{
  struct obj_section *s = find_pc_section (pc);
  return (s != nullptr
	  && s->the_bfd_section->name != nullptr
	  && strcmp (s->the_bfd_section->name, name) == 0);
}

/* See objfiles.h.  */

void
objfiles_changed (program_space *pspace)
{
  /* Rebuild section map next time we need it.  */
  get_objfile_pspace_data (pspace)->section_map_dirty = 1;
}

/* See comments in objfiles.h.  */

scoped_restore_tmpl<int>
inhibit_section_map_updates (struct program_space *pspace)
{
  return scoped_restore_tmpl<int>
    (&get_objfile_pspace_data (pspace)->inhibit_updates, 1);
}

/* See objfiles.h.  */

bool
is_addr_in_objfile (CORE_ADDR addr, const struct objfile *objfile)
{
  if (objfile == NULL)
    return false;

  for (obj_section &osect : objfile->sections ())
    {
      if (section_is_overlay (&osect) && !section_is_mapped (&osect))
	continue;

      if (osect.contains (addr))
	return true;
    }
  return false;
}

/* See objfiles.h.  */

bool
shared_objfile_contains_address_p (struct program_space *pspace,
				   CORE_ADDR address)
{
  for (objfile &objfile : pspace->objfiles ())
    {
      if ((objfile.flags & OBJF_SHARED) != 0
	  && is_addr_in_objfile (address, &objfile))
	return true;
    }

  return false;
}

/* See objfiles.h.  */

const char *
objfile_name (const struct objfile *objfile)
{
  if (objfile->obfd != NULL)
    return bfd_get_filename (objfile->obfd.get ());

  return objfile->original_name;
}

/* See objfiles.h.  */

const char *
objfile_filename (const struct objfile *objfile)
{
  if (objfile->obfd != NULL)
    return bfd_get_filename (objfile->obfd.get ());

  return NULL;
}

/* See objfiles.h.  */

const char *
objfile_debug_name (const struct objfile *objfile)
{
  return lbasename (objfile->original_name);
}

/* See objfiles.h.  */

const char *
objfile_flavour_name (struct objfile *objfile)
{
  if (objfile->obfd != NULL)
    return bfd_flavour_name (bfd_get_flavour (objfile->obfd.get ()));
  return NULL;
}

/* See objfiles.h.  */

struct type *
objfile_int_type (struct objfile *of, int size_in_bytes, bool unsigned_p)
{
  struct type *int_type;

  /* Helper macro to examine the various builtin types.  */
#define TRY_TYPE(F)							\
  int_type = (unsigned_p						\
	      ? builtin_type (of)->builtin_unsigned_ ## F		\
	      : builtin_type (of)->builtin_ ## F);			\
  if (int_type != NULL && int_type->length () == size_in_bytes)	\
    return int_type

  TRY_TYPE (char);
  TRY_TYPE (short);
  TRY_TYPE (int);
  TRY_TYPE (long);
  TRY_TYPE (long_long);

#undef TRY_TYPE

  gdb_assert_not_reached ("unable to find suitable integer type");
}