# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#  Copyright (C) 2006-2018 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3.  If not see
# <http://www.gnu.org/licenses/>.
#


VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
bin_PROGRAMS = dwp$(EXEEXT)
noinst_PROGRAMS = ld-new$(EXEEXT) incremental-dump$(EXEEXT)
@GCC_TRUE@@NATIVE_LINKER_TRUE@check_PROGRAMS = ld1$(EXEEXT) \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	ld2$(EXEEXT) ld1-r$(EXEEXT) \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	ld2-r$(EXEEXT) ld4$(EXEEXT) \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	$(am__EXEEXT_1)
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_1 = -Wl,--thread-count=3
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_2 = -Wl,--thread-count=3
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_3 = -Wl,--thread-count=13
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_4 = -Wl,--thread-count=3
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_5 = ld3
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__append_6 = bootstrap-test-treehash-chunksize
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/ax_pthread.m4 \
	$(top_srcdir)/../config/depstand.m4 \
	$(top_srcdir)/../config/gettext-sister.m4 \
	$(top_srcdir)/../config/lcmessage.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/nls.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/plugins.m4 \
	$(top_srcdir)/../config/po.m4 \
	$(top_srcdir)/../config/progtest.m4 \
	$(top_srcdir)/../config/zlib.m4 \
	$(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = po/Makefile.in
CONFIG_CLEAN_VPATH_FILES =
LIBRARIES = $(noinst_LIBRARIES)
AR = ar
ARFLAGS = cru
AM_V_AR = $(am__v_AR_@AM_V@)
am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
am__v_AR_0 = @echo "  AR      " $@;
am__v_AR_1 = 
libgold_a_AR = $(AR) $(ARFLAGS)
libgold_a_DEPENDENCIES = $(LIBOBJS)
am__objects_1 = archive.$(OBJEXT) attributes.$(OBJEXT) \
	binary.$(OBJEXT) common.$(OBJEXT) compressed_output.$(OBJEXT) \
	copy-relocs.$(OBJEXT) cref.$(OBJEXT) defstd.$(OBJEXT) \
	descriptors.$(OBJEXT) dirsearch.$(OBJEXT) dynobj.$(OBJEXT) \
	dwarf_reader.$(OBJEXT) ehframe.$(OBJEXT) errors.$(OBJEXT) \
	expression.$(OBJEXT) fileread.$(OBJEXT) gc.$(OBJEXT) \
	gdb-index.$(OBJEXT) gold.$(OBJEXT) gold-threads.$(OBJEXT) \
	icf.$(OBJEXT) incremental.$(OBJEXT) int_encoding.$(OBJEXT) \
	layout.$(OBJEXT) mapfile.$(OBJEXT) merge.$(OBJEXT) \
	nacl.$(OBJEXT) object.$(OBJEXT) options.$(OBJEXT) \
	output.$(OBJEXT) parameters.$(OBJEXT) plugin.$(OBJEXT) \
	readsyms.$(OBJEXT) reduced_debug_output.$(OBJEXT) \
	reloc.$(OBJEXT) resolve.$(OBJEXT) script-sections.$(OBJEXT) \
	script.$(OBJEXT) stringpool.$(OBJEXT) symtab.$(OBJEXT) \
	target.$(OBJEXT) target-select.$(OBJEXT) timer.$(OBJEXT) \
	version.$(OBJEXT) workqueue.$(OBJEXT) \
	workqueue-threads.$(OBJEXT)
am__objects_2 =
am__objects_3 = yyscript.$(OBJEXT)
am_libgold_a_OBJECTS = $(am__objects_1) $(am__objects_2) \
	$(am__objects_3) $(am__objects_2)
libgold_a_OBJECTS = $(am_libgold_a_OBJECTS)
am__installdirs = "$(DESTDIR)$(bindir)"
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@am__EXEEXT_1 =  \
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@	ld3$(EXEEXT)
PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
am_dwp_OBJECTS = dwp.$(OBJEXT)
dwp_OBJECTS = $(am_dwp_OBJECTS)
am__DEPENDENCIES_1 =
dwp_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(dwp_LDFLAGS) \
	$(LDFLAGS) -o $@
am_incremental_dump_OBJECTS = incremental-dump.$(OBJEXT)
incremental_dump_OBJECTS = $(am_incremental_dump_OBJECTS)
am__objects_4 = main.$(OBJEXT)
am_ld_new_OBJECTS = $(am__objects_4)
ld_new_OBJECTS = $(am_ld_new_OBJECTS)
am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) libgold.a $(LIBIBERTY) \
	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
	$(am__DEPENDENCIES_1)
ld_new_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(ld_new_LDFLAGS) \
	$(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld1_OBJECTS = $(am__objects_4)
ld1_OBJECTS = $(am_ld1_OBJECTS)
ld1_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(ld1_LDFLAGS) \
	$(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld1_r_OBJECTS = $(am__objects_4)
ld1_r_OBJECTS = $(am_ld1_r_OBJECTS)
ld1_r_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(ld1_r_LDFLAGS) \
	$(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld2_OBJECTS = $(am__objects_4)
ld2_OBJECTS = $(am_ld2_OBJECTS)
ld2_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(ld2_LDFLAGS) \
	$(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld2_r_OBJECTS = $(am__objects_4)
ld2_r_OBJECTS = $(am_ld2_r_OBJECTS)
ld2_r_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(ld2_r_LDFLAGS) \
	$(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld3_OBJECTS = $(am__objects_4)
ld3_OBJECTS = $(am_ld3_OBJECTS)
ld3_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(ld3_LDFLAGS) \
	$(LDFLAGS) -o $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld4_OBJECTS = $(am__objects_4)
ld4_OBJECTS = $(am_ld4_OBJECTS)
ld4_LINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(ld4_LDFLAGS) \
	$(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
AM_V_CXX = $(am__v_CXX_@AM_V@)
am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
am__v_CXX_0 = @echo "  CXX     " $@;
am__v_CXX_1 = 
CXXLD = $(CXX)
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
	-o $@
AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
am__v_CXXLD_0 = @echo "  CXXLD   " $@;
am__v_CXXLD_1 = 
@MAINTAINER_MODE_FALSE@am__skipyacc = test -f $@ ||
am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \
		   -e s/c++$$/h++/ -e s/c$$/h/
YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS)
AM_V_YACC = $(am__v_YACC_@AM_V@)
am__v_YACC_ = $(am__v_YACC_@AM_DEFAULT_V@)
am__v_YACC_0 = @echo "  YACC    " $@;
am__v_YACC_1 = 
YLWRAP = $(top_srcdir)/../ylwrap
SOURCES = $(libgold_a_SOURCES) $(dwp_SOURCES) \
	$(incremental_dump_SOURCES) $(ld_new_SOURCES) \
	$(EXTRA_ld_new_SOURCES) $(ld1_SOURCES) $(ld1_r_SOURCES) \
	$(ld2_SOURCES) $(ld2_r_SOURCES) $(ld3_SOURCES) $(ld4_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope check recheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
	$(LISP)config.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red='[0;31m'; \
    grn='[0;32m'; \
    lgn='[1;32m'; \
    blu='[1;34m'; \
    mgn='[0;35m'; \
    brg='[1m'; \
    std='[m'; \
  fi; \
}
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
	$(TEST_LOG_FLAGS)
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFAULT_TARGET = @DEFAULT_TARGET@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLOPEN_LIBS = @DLOPEN_LIBS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GOLD_LDADD = @GOLD_LDADD@
GOLD_LDFLAGS = @GOLD_LDFLAGS@
GREP = @GREP@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
LDFLAGS = @LDFLAGS@
LFS_CFLAGS = @LFS_CFLAGS@
LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MERGE_CONSTANTS_FLAG = @MERGE_CONSTANTS_FLAG@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NM = @NM@
NO_WERROR = @NO_WERROR@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANDOM_SEED_CFLAGS = @RANDOM_SEED_CFLAGS@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TARGETOBJS = @TARGETOBJS@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
WARN_CXXFLAGS = @WARN_CXXFLAGS@
WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
XGETTEXT = @XGETTEXT@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
ax_pthread_config = @ax_pthread_config@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_as_default = @install_as_default@
install_sh = @install_sh@
installed_linker = @installed_linker@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
zlibdir = @zlibdir@
zlibinc = @zlibinc@
AUTOMAKE_OPTIONS = foreign
SUBDIRS = po testsuite
tooldir = $(exec_prefix)/$(target_alias)
ACLOCAL_AMFLAGS = -I ../bfd -I ../config

# This is where we get zlib from.  zlibdir is -L../zlib and zlibinc is
# -I../zlib, unless we were configured with --with-system-zlib, in which
# case both are empty.
ZLIB = @zlibdir@ -lz
ZLIBINC = @zlibinc@
THREADFLAGS = @PTHREAD_CFLAGS@
THREADLIBS = @PTHREAD_LIBS@
AM_CFLAGS = $(WARN_CFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC) $(THREADFLAGS)
AM_CXXFLAGS = $(WARN_CXXFLAGS) $(LFS_CFLAGS) $(RANDOM_SEED_CFLAGS) $(ZLIBINC) $(THREADFLAGS)
AM_LDFLAGS = $(THREADFLAGS)
AM_CPPFLAGS = \
	-I$(srcdir) -I$(srcdir)/../include -I$(srcdir)/../elfcpp \
	-DLOCALEDIR="\"$(datadir)/locale\"" \
	-DBINDIR="\"$(bindir)\"" -DTOOLBINDIR="\"$(tooldir)/bin\"" \
	-DTOOLLIBDIR="\"$(tooldir)/lib\"" @INCINTL@

LIBIBERTY = ../libiberty/libiberty.a
@PLUGINS_TRUE@LIBDL = @DLOPEN_LIBS@
AM_YFLAGS = -d

# Automake 1.10+ disables lex and yacc output file regeneration if
# maintainer mode is disabled.  Avoid this.
am__skiplex = 
am__skipyacc = 
noinst_LIBRARIES = libgold.a
CCFILES = \
	archive.cc \
	attributes.cc \
	binary.cc \
	common.cc \
	compressed_output.cc \
	copy-relocs.cc \
	cref.cc \
	defstd.cc \
	descriptors.cc \
	dirsearch.cc \
	dynobj.cc \
	dwarf_reader.cc \
	ehframe.cc \
	errors.cc \
	expression.cc \
	fileread.cc \
        gc.cc \
        gdb-index.cc \
	gold.cc \
	gold-threads.cc \
	icf.cc \
	incremental.cc \
	int_encoding.cc \
	layout.cc \
	mapfile.cc \
	merge.cc \
	nacl.cc \
	object.cc \
	options.cc \
	output.cc \
	parameters.cc \
	plugin.cc \
	readsyms.cc \
	reduced_debug_output.cc \
	reloc.cc \
	resolve.cc \
	script-sections.cc \
	script.cc \
	stringpool.cc \
	symtab.cc \
	target.cc \
	target-select.cc \
	timer.cc \
	version.cc \
	workqueue.cc \
	workqueue-threads.cc

HFILES = \
	arm-reloc-property.h \
	aarch64-reloc-property.h \
	archive.h \
	attributes.h \
	binary.h \
	common.h \
	compressed_output.h \
	copy-relocs.h \
	cref.h \
	defstd.h \
	dirsearch.h \
	descriptors.h \
	dynobj.h \
	dwarf_reader.h \
	ehframe.h \
	errors.h \
	fileread.h \
	freebsd.h \
        gc.h \
        gdb-index.h \
	gold.h \
	gold-threads.h \
	icf.h \
	int_encoding.h \
	layout.h \
	mapfile.h \
	merge.h \
	nacl.h \
	object.h \
	options.h \
	output.h \
	parameters.h \
	plugin.h \
	readsyms.h \
	reduced_debug_output.h \
	reloc.h \
	reloc-types.h \
	script-c.h \
	script-sections.h \
	script.h \
	stringpool.h \
	symtab.h \
	target.h \
	target-reloc.h \
	target-select.h \
	timer.h \
	tls.h \
	token.h \
	workqueue.h \
	workqueue-internal.h

YFILES = \
	yyscript.y

DEFFILES = arm-reloc.def aarch64-reloc.def
EXTRA_DIST = yyscript.c yyscript.h
TARGETSOURCES = \
	i386.cc x86_64.cc sparc.cc powerpc.cc arm.cc arm-reloc-property.cc tilegx.cc \
	mips.cc aarch64.cc aarch64-reloc-property.cc s390.cc

ALL_TARGETOBJS = \
	i386.$(OBJEXT) x86_64.$(OBJEXT) sparc.$(OBJEXT) powerpc.$(OBJEXT) \
	arm.$(OBJEXT) arm-reloc-property.$(OBJEXT) tilegx.$(OBJEXT) \
	mips.$(OBJEXT) aarch64.$(OBJEXT) aarch64-reloc-property.$(OBJEXT) \
	s390.$(OBJEXT)

libgold_a_SOURCES = $(CCFILES) $(HFILES) $(YFILES) $(DEFFILES)
libgold_a_LIBADD = $(LIBOBJS)
sources_var = main.cc
deps_var = $(TARGETOBJS) libgold.a $(LIBIBERTY) $(LIBINTL_DEP)
ldadd_var = $(TARGETOBJS) libgold.a $(LIBIBERTY) $(GOLD_LDADD) $(LIBINTL) \
	 $(THREADLIBS) $(LIBDL) $(ZLIB)

ldflags_var = $(GOLD_LDFLAGS)
ld_new_SOURCES = $(sources_var)
ld_new_DEPENDENCIES = $(deps_var)
ld_new_LDADD = $(ldadd_var)
ld_new_LDFLAGS = $(ldflags_var)
EXTRA_ld_new_SOURCES = $(TARGETSOURCES)
incremental_dump_SOURCES = incremental-dump.cc
incremental_dump_DEPENDENCIES = $(TARGETOBJS) libgold.a $(LIBIBERTY) \
	$(LIBINTL_DEP)

incremental_dump_LDADD = $(TARGETOBJS) libgold.a $(LIBIBERTY) $(LIBINTL) \
	 $(THREADLIBS) $(LIBDL) $(ZLIB)

dwp_SOURCES = dwp.cc
dwp_DEPENDENCIES = libgold.a $(LIBIBERTY) $(LIBINTL_DEP)
dwp_LDADD = libgold.a $(LIBIBERTY) $(GOLD_LDADD) $(LIBINTL) $(THREADLIBS) \
	$(LIBDL) $(ZLIB)

dwp_LDFLAGS = $(GOLD_LDFLAGS)
CONFIG_STATUS_DEPENDENCIES = $(srcdir)/../bfd/development.sh
POTFILES = $(CCFILES) $(HFILES) $(TARGETSOURCES)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_DEPENDENCIES = $(deps_var) gcctestdir1/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_LDADD = $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_LDFLAGS = -Bgcctestdir1/ \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id=tree \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id-chunk-size-for-treehash=12345 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id-min-file-size-for-treehash=0 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	$(am__append_1)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_DEPENDENCIES = $(deps_var) gcctestdir2/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_LDADD = $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_LDFLAGS = -Bgcctestdir2/ \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id=tree \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id-chunk-size-for-treehash=12345 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id-min-file-size-for-treehash=0 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	$(am__append_2)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_r_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_r_DEPENDENCIES = libgold-1-r.o $(deps_var) gcctestdir1/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_r_LDADD = libgold-1-r.o $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_r_LDFLAGS = -Bgcctestdir1/
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_r_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_r_DEPENDENCIES = libgold-2-r.o $(deps_var) gcctestdir2-r/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_r_LDADD = libgold-2-r.o $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_r_LDFLAGS = -Bgcctestdir2-r/
@GCC_TRUE@@NATIVE_LINKER_TRUE@TESTS = bootstrap-test bootstrap-test-r \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	bootstrap-test-treehash-chunksize \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	$(am__append_6)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld3_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld3_DEPENDENCIES = $(deps_var) gcctestdir3/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld3_LDADD = $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld3_LDFLAGS = -Bgcctestdir3/ \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id=tree \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id-chunk-size-for-treehash=12345 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id-min-file-size-for-treehash=0 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	$(am__append_3)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld4_SOURCES = $(sources_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld4_DEPENDENCIES = $(deps_var) gcctestdir4/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld4_LDADD = $(ldadd_var)
@GCC_TRUE@@NATIVE_LINKER_TRUE@ld4_LDFLAGS = -Bgcctestdir4/ \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id=tree \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id-chunk-size-for-treehash=12346 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	-Wl,--build-id-min-file-size-for-treehash=0 \
@GCC_TRUE@@NATIVE_LINKER_TRUE@	$(am__append_4)
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .cc .log .o .obj .test .test$(EXEEXT) .trs .y
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
po/Makefile.in: $(top_builddir)/config.status $(top_srcdir)/po/Make-in
	cd $(top_builddir) && $(SHELL) ./config.status $@

clean-noinstLIBRARIES:
	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
yyscript.h: yyscript.c
	@if test ! -f $@; then rm -f yyscript.c; else :; fi
	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) yyscript.c; else :; fi

libgold.a: $(libgold_a_OBJECTS) $(libgold_a_DEPENDENCIES) $(EXTRA_libgold_a_DEPENDENCIES) 
	$(AM_V_at)-rm -f libgold.a
	$(AM_V_AR)$(libgold_a_AR) libgold.a $(libgold_a_OBJECTS) $(libgold_a_LIBADD)
	$(AM_V_at)$(RANLIB) libgold.a
install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
	fi; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p \
	  ; then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' \
	    -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' \
	`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

clean-binPROGRAMS:
	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)

clean-checkPROGRAMS:
	-test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS)

clean-noinstPROGRAMS:
	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)

dwp$(EXEEXT): $(dwp_OBJECTS) $(dwp_DEPENDENCIES) $(EXTRA_dwp_DEPENDENCIES) 
	@rm -f dwp$(EXEEXT)
	$(AM_V_CXXLD)$(dwp_LINK) $(dwp_OBJECTS) $(dwp_LDADD) $(LIBS)

incremental-dump$(EXEEXT): $(incremental_dump_OBJECTS) $(incremental_dump_DEPENDENCIES) $(EXTRA_incremental_dump_DEPENDENCIES) 
	@rm -f incremental-dump$(EXEEXT)
	$(AM_V_CXXLD)$(CXXLINK) $(incremental_dump_OBJECTS) $(incremental_dump_LDADD) $(LIBS)

ld-new$(EXEEXT): $(ld_new_OBJECTS) $(ld_new_DEPENDENCIES) $(EXTRA_ld_new_DEPENDENCIES) 
	@rm -f ld-new$(EXEEXT)
	$(AM_V_CXXLD)$(ld_new_LINK) $(ld_new_OBJECTS) $(ld_new_LDADD) $(LIBS)

ld1$(EXEEXT): $(ld1_OBJECTS) $(ld1_DEPENDENCIES) $(EXTRA_ld1_DEPENDENCIES) 
	@rm -f ld1$(EXEEXT)
	$(AM_V_CXXLD)$(ld1_LINK) $(ld1_OBJECTS) $(ld1_LDADD) $(LIBS)

ld1-r$(EXEEXT): $(ld1_r_OBJECTS) $(ld1_r_DEPENDENCIES) $(EXTRA_ld1_r_DEPENDENCIES) 
	@rm -f ld1-r$(EXEEXT)
	$(AM_V_CXXLD)$(ld1_r_LINK) $(ld1_r_OBJECTS) $(ld1_r_LDADD) $(LIBS)

ld2$(EXEEXT): $(ld2_OBJECTS) $(ld2_DEPENDENCIES) $(EXTRA_ld2_DEPENDENCIES) 
	@rm -f ld2$(EXEEXT)
	$(AM_V_CXXLD)$(ld2_LINK) $(ld2_OBJECTS) $(ld2_LDADD) $(LIBS)

ld2-r$(EXEEXT): $(ld2_r_OBJECTS) $(ld2_r_DEPENDENCIES) $(EXTRA_ld2_r_DEPENDENCIES) 
	@rm -f ld2-r$(EXEEXT)
	$(AM_V_CXXLD)$(ld2_r_LINK) $(ld2_r_OBJECTS) $(ld2_r_LDADD) $(LIBS)

ld3$(EXEEXT): $(ld3_OBJECTS) $(ld3_DEPENDENCIES) $(EXTRA_ld3_DEPENDENCIES) 
	@rm -f ld3$(EXEEXT)
	$(AM_V_CXXLD)$(ld3_LINK) $(ld3_OBJECTS) $(ld3_LDADD) $(LIBS)

ld4$(EXEEXT): $(ld4_OBJECTS) $(ld4_DEPENDENCIES) $(EXTRA_ld4_DEPENDENCIES) 
	@rm -f ld4$(EXEEXT)
	$(AM_V_CXXLD)$(ld4_LINK) $(ld4_OBJECTS) $(ld4_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/ffsll.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/ftruncate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/mremap.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/pread.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aarch64-reloc-property.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aarch64.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/archive.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arm-reloc-property.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arm.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/attributes.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/binary.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/compressed_output.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/copy-relocs.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cref.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/defstd.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/descriptors.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dirsearch.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dwarf_reader.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dwp.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dynobj.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ehframe.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/errors.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expression.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fileread.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdb-index.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gold-threads.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gold.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i386.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/icf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/incremental-dump.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/incremental.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/int_encoding.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/layout.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mapfile.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/merge.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mips.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nacl.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/object.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/options.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/output.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parameters.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/plugin.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/powerpc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readsyms.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reduced_debug_output.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reloc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/resolve.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/s390.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/script-sections.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/script.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sparc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stringpool.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symtab.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/target-select.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/target.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tilegx.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/timer.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/workqueue-threads.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/workqueue.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x86_64.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/yyscript.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cc.o:
@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<

.cc.obj:
@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.y.c:
	$(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h `echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:

$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS:
	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all $(check_PROGRAMS)
	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
bootstrap-test.log: bootstrap-test
	@p='bootstrap-test'; \
	b='bootstrap-test'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
bootstrap-test-r.log: bootstrap-test-r
	@p='bootstrap-test-r'; \
	b='bootstrap-test-r'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
bootstrap-test-treehash-chunksize.log: bootstrap-test-treehash-chunksize
	@p='bootstrap-test-treehash-chunksize'; \
	b='bootstrap-test-treehash-chunksize'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; \
@am__EXEEXT_TRUE@	$(am__set_b); \
@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile $(LIBRARIES) $(PROGRAMS) config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-rm -f yyscript.c
	-rm -f yyscript.h
clean: clean-recursive

clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
	clean-noinstLIBRARIES clean-noinstPROGRAMS mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(DEPDIR) ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-binPROGRAMS install-exec-local

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf $(DEPDIR) ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binPROGRAMS

.MAKE: $(am__recursive_targets) all check-am install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--refresh check check-TESTS check-am clean clean-binPROGRAMS \
	clean-checkPROGRAMS clean-cscope clean-generic \
	clean-noinstLIBRARIES clean-noinstPROGRAMS cscope \
	cscopelist-am ctags ctags-am distclean distclean-compile \
	distclean-generic distclean-hdr distclean-tags dvi dvi-am html \
	html-am info info-am install install-am install-binPROGRAMS \
	install-data install-data-am install-data-local install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-local \
	install-html install-html-am install-info install-info-am \
	install-man install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic pdf pdf-am ps ps-am recheck tags tags-am \
	uninstall uninstall-am uninstall-binPROGRAMS

.PRECIOUS: Makefile


diststuff: $(EXTRA_DIST)

# Use an explicit dependency for the bison generated header file.
expression.$(OBJEXT): yyscript.h
script-sections.$(OBJEXT): yyscript.h
script.$(OBJEXT): yyscript.h

# We have to build libgold.a before we run the tests.
check: libgold.a

.PHONY: install-exec-local

install-exec-local: ld-new$(EXEEXT)
	$(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(tooldir)/bin
	n=`echo $(installed_linker) | sed '$(transform)'`; \
	$(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) \
	  ld-new$(EXEEXT) $(DESTDIR)$(bindir)/$${n}$(EXEEXT); \
	if test "$(bindir)" != "$(tooldir)/bin"; then \
	  rm -f $(DESTDIR)$(tooldir)/bin/$(installed_linker)$(EXEEXT); \
	  ln $(DESTDIR)$(bindir)/$${n}$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$(installed_linker)$(EXEEXT) >/dev/null 2>/dev/null \
	  || $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) ld-new$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$(installed_linker)$(EXEEXT); \
	fi; \
	if test "x$(install_as_default)" = "xyes"; then \
	  ld=`echo ld | sed '$(transform)'`; \
	  rm -f $(DESTDIR)$(bindir)/$${ld}$(EXEEXT); \
	  ln $(DESTDIR)$(bindir)/$${n}$(EXEEXT) $(DESTDIR)$(bindir)/$${ld}$(EXEEXT) >/dev/null 2>/dev/null \
	  || $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) ld-new$(EXEEXT) $(DESTDIR)$(bindir)/$${ld}$(EXEEXT); \
	  if test "$(bindir)" != "$(tooldir)/bin"; then \
	    rm -f $(DESTDIR)$(tooldir)/bin/ld$(EXEEXT); \
	    ln $(DESTDIR)$(bindir)/$${n}$(EXEEXT) $(DESTDIR)$(tooldir)/bin/ld$(EXEEXT) >/dev/null 2>/dev/null \
	    || $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) ld-new$(EXEEXT) $(DESTDIR)$(tooldir)/bin/ld$(EXEEXT); \
	  fi; \
	fi

# We want install to imply install-info as per GNU standards, despite
# the cygnus option.
install-data-local: install-info

po/POTFILES.in: @MAINT@ Makefile
	for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
	  && mv tmp $(srcdir)/po/POTFILES.in

# Bootstrap test support.  We use ld-new to build ld1, then use ld1 to
# build ld2.  ld1 and ld2 should be identical.  ld-new need not be
# identical to ld1, since it was linked with the host linker.

@GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir1/ld: ld-new
@GCC_TRUE@@NATIVE_LINKER_TRUE@	test -d gcctestdir1 || mkdir -p gcctestdir1
@GCC_TRUE@@NATIVE_LINKER_TRUE@	rm -f gcctestdir1/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@	(cd gcctestdir1 && $(LN_S) ../ld-new ld)

@GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir2/ld: ld1
@GCC_TRUE@@NATIVE_LINKER_TRUE@	test -d gcctestdir2 || mkdir -p gcctestdir2
@GCC_TRUE@@NATIVE_LINKER_TRUE@	rm -f gcctestdir2/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@	(cd gcctestdir2 && $(LN_S) ../ld1 ld)

@GCC_TRUE@@NATIVE_LINKER_TRUE@bootstrap-test: ld2
@GCC_TRUE@@NATIVE_LINKER_TRUE@	rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@	echo "#!/bin/sh" > $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@	echo "cmp ld1 ld2" >> $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@	chmod +x $@

@GCC_TRUE@@NATIVE_LINKER_TRUE@libgold-1-r.o: gcctestdir1/ld libgold.a
@GCC_TRUE@@NATIVE_LINKER_TRUE@	gcctestdir1/ld -o $@ -r --whole-archive libgold.a

@GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir2-r/ld: ld1-r
@GCC_TRUE@@NATIVE_LINKER_TRUE@	test -d gcctestdir2-r || mkdir -p gcctestdir2-r
@GCC_TRUE@@NATIVE_LINKER_TRUE@	rm -f gcctestdir2-r/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@	(cd gcctestdir2-r && $(LN_S) ../ld1-r ld)

@GCC_TRUE@@NATIVE_LINKER_TRUE@libgold-2-r.o: gcctestdir2-r/ld libgold.a
@GCC_TRUE@@NATIVE_LINKER_TRUE@	gcctestdir2-r/ld -o $@ -r --whole-archive libgold.a

@GCC_TRUE@@NATIVE_LINKER_TRUE@bootstrap-test-r: ld2-r
@GCC_TRUE@@NATIVE_LINKER_TRUE@	rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@	echo "#!/bin/sh" > $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@	echo "cmp ld1-r ld2-r" >> $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@	chmod +x $@

@GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir3/ld: ld-new
@GCC_TRUE@@NATIVE_LINKER_TRUE@	test -d gcctestdir3 || mkdir -p gcctestdir3
@GCC_TRUE@@NATIVE_LINKER_TRUE@	rm -f gcctestdir3/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@	(cd gcctestdir3 && $(LN_S) ../ld-new ld)

@GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir4/ld: ld-new
@GCC_TRUE@@NATIVE_LINKER_TRUE@	test -d gcctestdir4 || mkdir -p gcctestdir4
@GCC_TRUE@@NATIVE_LINKER_TRUE@	rm -f gcctestdir4/ld
@GCC_TRUE@@NATIVE_LINKER_TRUE@	(cd gcctestdir4 && $(LN_S) ../ld-new ld)

@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@bootstrap-test-treehash: ld1 ld3
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@	rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@	echo "#!/bin/sh" > $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@	echo "cmp ld1 ld3" >> $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@@THREADS_TRUE@	chmod +x $@

@GCC_TRUE@@NATIVE_LINKER_TRUE@bootstrap-test-treehash-chunksize: ld1 ld4
@GCC_TRUE@@NATIVE_LINKER_TRUE@	rm -f $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@	echo "#!/bin/sh" > $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@	echo "cmp ld1 ld4 | grep ." >> $@
@GCC_TRUE@@NATIVE_LINKER_TRUE@	chmod +x $@

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: