blob: 6b988613e557009e535f28dfbfba8070a3499832 [file] [log] [blame]
2011-12-15 Nick Clifton <nickc@redhat.com>
* cgen-asm.c (cgen_parse_signed_integer): Add code to handle the
sign extension of negative values on a 64-bit host.
* frv-asm.c: Regenerate.
2011-12-13 Alan Modra <amodra@gmail.com>
* ppc-opc.c (ISA_V2): Define and use for relevant BO field tests.
(valid_bo_pre_v2, valid_bo_post_v2): New functions, extracted from..
(valid_bo): ..here. When disassembling, accept either 'y' or 'at'
type encoding on second pass.
(powerpc_opcodes): Use ISA_V2 to enable branch insns rather than
POWER4.
* ppc-dis.c (print_insn_powerpc): Delete dialect_orig. Instead
ignore deprecated on second pass.
2011-12-08 Andrew Pinski <apinski@cavium.com>
* mips-opc.c (mips_builtin_opcodes): Add "pause".
2011-12-08 Andrew Pinski <apinski@cavium.com>
Adam Nemet <anemet@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add Octeon2.
For "octeon+", just include OcteonP for the insn.
* mips-opc.c (IOCT): Include Octeon2.
(IOCTP): Include Octeon2.
(IOCT2): New macro.
(mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
"ladd", "lai", "laid", "las", "lasd", "law", "lawd".
Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
loads are, and add IOCT2 to them.
Add "lbx" and "lhux".
Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
"qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
Add "zcb" and "zcbt".
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips-dis.c (mips_arch_choices): Add Octeon+.
* mips-opc.c (IOCT): Include Octeon+.
(IOCTP): New macro.
(mips_builtin_opcodes): Add "saa" and "saad".
2011-11-25 Pierre Muller <muller@ics.u-strasbg.fr>
* mips-dis.c (print_insn_micromips): Rename local variable iprintf
to infprintf to avoid shadow warning.
2011-11-25 Nick Clifton <nickc@redhat.com>
* po/it.po: Updated Italian translation.
2011-11-16 Maciej W. Rozycki <macro@codesourcery.com>
* micromips-opc.c (micromips_opcodes): Use NODS rather than TRAP
for "alnv.ps".
2011-11-02 Nick Clifton <nickc@redhat.com>
* po/it.po: New Italian translation.
* configure.in (ALL_LINGUAS): Add it.
* configure: Regenerate.
* po/opcodes.pot: Regenerate.
2011-11-01 DJ Delorie <dj@redhat.com>
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and
rl78-dis.c.
(MAINTAINERCLEANFILES): Add rl78-decode.c.
(rl78-decode.c): New rule, built from rl78-decode.opc and opc2c.
* Makefile.in: Regenerate.
* configure.in: Add bfd_rl78_arch case.
* configure: Regenerate.
* disassemble.c: Define ARCH_rl78.
(disassembler): Add ARCH_rl78 case.
* rl78-decode.c: New file.
* rl78-decode.opc: New file.
* rl78-dis.c: New file.
2011-10-27 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (powerpc_opcodes) <drrndq, drrndq., dtstexq, dctqpq,
dctqpq., dctfixq, dctfixq., dxexq, dxexq., dtstsfq, dcffixq, dcffixq.,
diexq, diexq.>: Use FRT, FRA, FRB and FRBp repsectively on DFP quad
instructions.
2011-10-26 Nick Clifton <nickc@redhat.com>
PR binutils/13348
* i386-dis.c (print_insn): Fix testing of array subscript.
2011-10-26 Joern Rennecke <joern.rennecke@embecosm.com>
* disassemble.c (ARCH_epiphany): Move into alphasorted spot.
* epiphany-asm.c, epiphany-opc.h: Regenerate.
2011-10-25 Joern Rennecke <joern.rennecke@embecosm.com>
* Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h .
(TARGET_LIBOPCODES_CFILES): Add epiphany-asm.c, epiphany-desc.c,
epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c .
(CLEANFILES): Add stamp-epiphany.
(EPIPHANY_DEPS): Set. Make CGEN-generated Epiphany files depend on it.
(stamp-epiphany): New rule.
* configure.in: Handle bfd_epiphany_arch.
* disassemble.c (ARCH_epiphany): Define.
(disassembler): Handle bfd_arch_epiphany.
* epiphany-asm.c: New file.
* epiphany-desc.c: New file.
* epiphany-desc.h: New file.
* epiphany-dis.c: New file.
* epiphany-ibld.c: New file.
* epiphany-opc.c: New file.
* epiphany-opc.h: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
2011-10-24 Julian Brown <julian@codesourcery.com>
* m68k-opc.c (m68k_opcodes): Fix entries for ColdFire moveml.
2011-10-21 Jan Glauber <jang@linux.vnet.ibm.com>
* s390-opc.txt: Add CPUMF instructions.
2011-10-18 Jie Zhang <jie@codesourcery.com>
Julian Brown <julian@codesourcery.com>
* arm-dis.c (print_insn_arm): Explicitly specify rotation if needed.
2011-10-10 Nick Clifton <nickc@redhat.com>
* po/es.po: Updated Spanish translation.
* po/fi.po: Updated Finnish translation.
2011-09-28 Jan Beulich <jbeulich@suse.com>
* ppc-opc.c (insert_nbi, insert_rbx, FRAp, FRBp, FRSp, FRTp, NBI, RAX,
RBX): New.
(insert_bo, insert_boe): Reject bcctr with bit 2 in bo unset.
(powerpc_opcodes): Use RAX for second and RBXC for third operand of
lswx. Use NBI for third operand of lswi. Use FRTp for first operand of
lfdp and lfdpx. Use FRSp for first operand of stfdp and stfdpx, and
mark them as invalid on POWER7. Use FRTp, FRAp, and FRBp repsectively
on DFP quad instructions.
2011-09-27 David S. Miller <davem@davemloft.net>
* sparc-opc.c (sparc_opcodes): Fix random instruction to write
to a float instead of an integer register.
2011-09-26 David S. Miller <davem@davemloft.net>
* sparc-opc.c (sparc_opcodes): Add integer multiply-add
instructions.
2011-09-21 David S. Miller <davem@davemloft.net>
* sparc-opc.c (sparc_opcodes): Annotate table with HWCAP flag
bits. Fix "fchksm16" mnemonic.
2011-09-08 Mark Fortescue <mark@mtfhpc.demon.co.uk>
The changes below bring 'mov' and 'ticc' instructions into line
with the V8 SPARC Architecture Manual.
* sparc-opc.c (sparc_opcodes): Add entry for 'ticc imm + regrs1'.
* sparc-opc.c (sparc_opcodes): Add alias entries for
'mov regrs2,%asrX'; 'mov regrs2,%y'; 'mov regrs2,%prs';
'mov regrs2,%wim' and 'mov regrs2,%tbr'.
* sparc-opc.c (sparc_opcodes): Move/Change entries for
'mov imm,%asrX'; 'mov imm,%y'; 'mov imm,%prs'; 'mov imm,%wim'
and 'mov imm,%tbr'.
* sparc-opc.c (sparc_opcodes): Add wr alias entries to match above
mov aliases.
* sparc-opc.c (sparc_opcodes): Add entry for 'save simm13,regrs1,regrd'
This has been reported as being accepted by the Sun assmebler.
2011-09-08 David S. Miller <davem@davemloft.net>
* sparc-opc.c (pdistn): Destination is integer not float register.
2011-09-07 Andreas Schwab <schwab@linux-m68k.org>
PR gas/13145
* m68k-opc.c: Use "y" in moveml pattern for mcfisa_a.
2011-08-26 Nick Clifton <nickc@redhat.com>
* po/es.po: Updated Spanish translation.
2011-08-22 Nick Clifton <nickc@redhat.com>
* Makefile.am (CPUDIR): Redfine to point to top level cpu
directory.
(stamp-frv): Use CPUDIR.
(stamp-iq2000): Likewise.
(stamp-lm32): Likewise.
(stamp-m32c): Likewise.
(stamp-mt): Likewise.
(stamp-xc16x): Likewise.
* Makefile.in: Regenerate.
2011-08-09 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips-dis.c (mips_arch_choices): Enable MCU for "mips32r2"
and "mips64r2".
(print_insn_args, print_insn_micromips): Handle MCU.
* micromips-opc.c (MC): New macro.
(micromips_opcodes): Add "aclr", "aset" and "iret".
* mips-opc.c (MC): New macro.
(mips_builtin_opcodes): Add "aclr", "aset" and "iret".
2011-08-09 Maciej W. Rozycki <macro@codesourcery.com>
* micromips-opc.c (MOD_mb, MOD_mc, MOD_md): Remove macros.
(MOD_me, MOD_mf, MOD_mg, MOD_mhi, MOD_mj, MOD_ml): Likewise.
(MOD_mm, MOD_mn, MOD_mp, MOD_mq, MOD_sp): Likewise.
(WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf): New macros.
(RD_mg, WR_mhi, RD_mj, WR_mj, RD_ml, RD_mmn): Likewise.
(RD_mp, WR_mp, RD_mq, RD_sp, WR_sp): Likewise.
(WR_s): Update macro.
(micromips_opcodes): Update register use flags of: "addiu",
"addiupc", "addiur1sp", "addiur2", "addius5", "addiusp", "addu",
"and", "andi", "beq", "beqz", "bne", "bnez", "di", "ei", "j",
"jalr", "jalrs", "jr", "jraddiusp", "jrc", "lbu", "lhu", "li",
"lui", "lw", "lwm", "mfhi", "mflo", "move", "movep", "not",
"nor", "or", "ori", "sb", "sh", "sll", "srl", "subu", "sw",
"swm" and "xor" instructions.
2011-08-05 David S. Miller <davem@davemloft.net>
* sparc-dis.c (v9a_ast_reg_names): Add "cps".
(X_RS3): New macro.
(print_insn_sparc): Handle '4', '5', and '(' format codes.
Accept %asr numbers below 28.
* sparc-opc.c (sparc_opcodes): Add entries for HPC and VIS3
instructions.
2011-08-02 Quentin Neill <quentin.neill@amd.com>
* i386-dis.c (xop_table): Remove spurious bextr insn.
2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13048
* i386-dis.c (print_insn): Optimize info->mach check.
2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
PR gas/13046
* i386-opc.tbl: Add Disp32S to 64bit call.
* i386-tbl.h: Regenerated.
2011-07-24 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* micromips-opc.c: New file.
* mips-dis.c (micromips_to_32_reg_b_map): New array.
(micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise.
(micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise.
(micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise.
(micromips_to_32_reg_q_map): Likewise.
(micromips_imm_b_map, micromips_imm_c_map): Likewise.
(micromips_ase): New variable.
(is_micromips): New function.
(set_default_mips_dis_options): Handle microMIPS ASE.
(print_insn_micromips): New function.
(is_compressed_mode_p): Likewise.
(_print_insn_mips): Handle microMIPS instructions.
* Makefile.am (CFILES): Add micromips-opc.c.
* configure.in (bfd_mips_arch): Add micromips-opc.lo.
* Makefile.in: Regenerate.
* configure: Regenerate.
* mips-dis.c (micromips_to_32_reg_h_map): New variable.
(micromips_to_32_reg_i_map): Likewise.
(micromips_to_32_reg_m_map): Likewise.
(micromips_to_32_reg_n_map): New macro.
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(DSP_VOLA): Likewise.
(mips_builtin_opcodes): Add NODS annotation to "deret" and
"eret". Replace INSN_SYNC with NODS throughout. Use NODS in
place of TRAP for "wait", "waiti" and "yield".
* mips16-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc",
"restore" and "save".
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* configure.in: Handle bfd_k1om_arch.
* configure: Regenerated.
* disassemble.c (disassembler): Handle bfd_k1om_arch.
* i386-dis.c (print_insn): Handle bfd_mach_k1om and
bfd_mach_k1om_intel_syntax.
* i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to
~(CpuL1OM|CpuK1OM). Add CPU_K1OM_FLAGS.
(cpu_flags): Add CpuK1OM.
* i386-opc.h (CpuK1OM): New.
(i386_cpu_flags): Add cpuk1om.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2011-07-12 Nick Clifton <nickc@redhat.com>
* arm-dis.c (print_insn_arm): Revert previous, undocumented,
accidental change.
2011-07-01 Nick Clifton <nickc@redhat.com>
PR binutils/12329
* avr-dis.c (avr_operand): Fix disassembly of ELPM, LPM and SPM
insns using post-increment addressing.
2011-06-30 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (vex_len_table): Update rorxS.
2011-06-30 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2011)
* i386-dis.c (vex_len_table): Correct rorxS.
* i386-opc.tbl: Correct rorx.
* i386-tbl.h: Regenerated.
2011-06-29 H.J. Lu <hongjiu.lu@intel.com>
* tilegx-opc.c (find_opcode): Replace "index" with "i".
* tilepro-opc.c (find_opcode): Likewise.
2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
* mips16-opc.c (jalrc, jrc): Move earlier in file.
2011-06-21 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (prefix_table): Re-indent PREFIX_VEX_0F388C and
PREFIX_VEX_0F388E.
2011-06-17 Andreas Schwab <schwab@redhat.com>
* Makefile.am (MAINTAINERCLEANFILES): Move s390-opc.tab ...
(MOSTLYCLEANFILES): ... here.
* Makefile.in: Regenerate.
2011-06-14 Alan Modra <amodra@gmail.com>
* Makefile.in: Regenerate.
2011-06-13 Walter Lee <walt@tilera.com>
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c,
tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c.
* Makefile.in: Regenerate.
* configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch.
* configure: Regenerate.
* disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro.
* po/POTFILES.in: Regenerate.
* tilegx-dis.c: New file.
* tilegx-opc.c: New file.
* tilepro-dis.c: New file.
* tilepro-opc.c: New file.
2011-06-10 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2011)
* i386-dis.c (XMGatherQ): New.
* i386-dis.c (EXxmm_mb): New.
(EXxmm_mb): Likewise.
(EXxmm_mw): Likewise.
(EXxmm_md): Likewise.
(EXxmm_mq): Likewise.
(EXxmmdw): Likewise.
(EXxmmqd): Likewise.
(VexGatherQ): Likewise.
(MVexVSIBDWpX): Likewise.
(MVexVSIBQWpX): Likewise.
(xmm_mb_mode): Likewise.
(xmm_mw_mode): Likewise.
(xmm_md_mode): Likewise.
(xmm_mq_mode): Likewise.
(xmmdw_mode): Likewise.
(xmmqd_mode): Likewise.
(ymmxmm_mode): Likewise.
(vex_vsib_d_w_dq_mode): Likewise.
(vex_vsib_q_w_dq_mode): Likewise.
(MOD_VEX_0F385A_PREFIX_2): Likewise.
(MOD_VEX_0F388C_PREFIX_2): Likewise.
(MOD_VEX_0F388E_PREFIX_2): Likewise.
(PREFIX_0F3882): Likewise.
(PREFIX_VEX_0F3816): Likewise.
(PREFIX_VEX_0F3836): Likewise.
(PREFIX_VEX_0F3845): Likewise.
(PREFIX_VEX_0F3846): Likewise.
(PREFIX_VEX_0F3847): Likewise.
(PREFIX_VEX_0F3858): Likewise.
(PREFIX_VEX_0F3859): Likewise.
(PREFIX_VEX_0F385A): Likewise.
(PREFIX_VEX_0F3878): Likewise.
(PREFIX_VEX_0F3879): Likewise.
(PREFIX_VEX_0F388C): Likewise.
(PREFIX_VEX_0F388E): Likewise.
(PREFIX_VEX_0F3890..PREFIX_VEX_0F3893): Likewise.
(PREFIX_VEX_0F38F5): Likewise.
(PREFIX_VEX_0F38F6): Likewise.
(PREFIX_VEX_0F3A00): Likewise.
(PREFIX_VEX_0F3A01): Likewise.
(PREFIX_VEX_0F3A02): Likewise.
(PREFIX_VEX_0F3A38): Likewise.
(PREFIX_VEX_0F3A39): Likewise.
(PREFIX_VEX_0F3A46): Likewise.
(PREFIX_VEX_0F3AF0): Likewise.
(VEX_LEN_0F3816_P_2): Likewise.
(VEX_LEN_0F3819_P_2): Likewise.
(VEX_LEN_0F3836_P_2): Likewise.
(VEX_LEN_0F385A_P_2_M_0): Likewise.
(VEX_LEN_0F38F5_P_0): Likewise.
(VEX_LEN_0F38F5_P_1): Likewise.
(VEX_LEN_0F38F5_P_3): Likewise.
(VEX_LEN_0F38F6_P_3): Likewise.
(VEX_LEN_0F38F7_P_1): Likewise.
(VEX_LEN_0F38F7_P_2): Likewise.
(VEX_LEN_0F38F7_P_3): Likewise.
(VEX_LEN_0F3A00_P_2): Likewise.
(VEX_LEN_0F3A01_P_2): Likewise.
(VEX_LEN_0F3A38_P_2): Likewise.
(VEX_LEN_0F3A39_P_2): Likewise.
(VEX_LEN_0F3A46_P_2): Likewise.
(VEX_LEN_0F3AF0_P_3): Likewise.
(VEX_W_0F3816_P_2): Likewise.
(VEX_W_0F3818_P_2): Likewise.
(VEX_W_0F3819_P_2): Likewise.
(VEX_W_0F3836_P_2): Likewise.
(VEX_W_0F3846_P_2): Likewise.
(VEX_W_0F3858_P_2): Likewise.
(VEX_W_0F3859_P_2): Likewise.
(VEX_W_0F385A_P_2_M_0): Likewise.
(VEX_W_0F3878_P_2): Likewise.
(VEX_W_0F3879_P_2): Likewise.
(VEX_W_0F3A00_P_2): Likewise.
(VEX_W_0F3A01_P_2): Likewise.
(VEX_W_0F3A02_P_2): Likewise.
(VEX_W_0F3A38_P_2): Likewise.
(VEX_W_0F3A39_P_2): Likewise.
(VEX_W_0F3A46_P_2): Likewise.
(MOD_VEX_0F3818_PREFIX_2): Removed.
(MOD_VEX_0F3819_PREFIX_2): Likewise.
(VEX_LEN_0F60_P_2..VEX_LEN_0F6D_P_2): Likewise.
(VEX_LEN_0F70_P_1..VEX_LEN_0F76_P_2): Likewise.
(VEX_LEN_0FD1_P_2..VEX_LEN_0FD5_P_2): Likewise.
(VEX_LEN_0FD7_P_2_M_1..VEX_LEN_0F3819_P_2_M_0): Likewise.
(VEX_LEN_0F381C_P_2..VEX_LEN_0F3840_P_2): Likewise.
(VEX_LEN_0F3A0E_P_2): Likewise.
(VEX_LEN_0F3A0F_P_2): Likewise.
(VEX_LEN_0F3A42_P_2): Likewise.
(VEX_LEN_0F3A4C_P_2): Likewise.
(VEX_W_0F3818_P_2_M_0): Likewise.
(VEX_W_0F3819_P_2_M_0): Likewise.
(prefix_table): Updated.
(three_byte_table): Likewise.
(vex_table): Likewise.
(vex_len_table): Likewise.
(vex_w_table): Likewise.
(mod_table): Likewise.
(putop): Handle "LW".
(intel_operand_size): Handle xmm_mb_mode, xmm_mw_mode,
xmm_md_mode, xmm_mq_mode, xmmdw_mode, xmmqd_mode, ymmxmm_mode,
vex_vsib_d_w_dq_mode, vex_vsib_q_w_dq_mode.
(OP_EX): Likewise.
(OP_E_memory): Handle vex_vsib_d_w_dq_mode and
vex_vsib_q_w_dq_mode.
(OP_XMM): Handle vex_vsib_q_w_dq_mode.
(OP_VEX): Likewise.
* i386-gen.c (cpu_flag_init): Add CpuAVX2 to CPU_ANY_SSE_FLAGS
and CPU_ANY_AVX_FLAGS. Add CPU_BMI2_FLAGS, CPU_LZCNT_FLAGS,
CPU_INVPCID_FLAGS and CPU_AVX2_FLAGS.
(cpu_flags): Add CpuAVX2, CpuBMI2, CpuLZCNT and CpuINVPCID.
(opcode_modifiers): Add VecSIB.
* i386-opc.h (CpuAVX2): New.
(CpuBMI2): Likewise.
(CpuLZCNT): Likewise.
(CpuINVPCID): Likewise.
(VecSIB128): Likewise.
(VecSIB256): Likewise.
(VecSIB): Likewise.
(i386_cpu_flags): Add cpuavx2, cpubmi2, cpulzcnt and cpuinvpcid.
(i386_opcode_modifier): Add vecsib.
* i386-opc.tbl: Add invpcid, AVX2 and BMI2 instructions.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2011-06-03 Quentin Neill <quentin.neill@amd.com>
* i386-gen.c (cpu_flag_init): Add CpuF16C to CPU_BDVER2_FLAGS.
* i386-init.h: Regenerated.
2011-06-03 Nick Clifton <nickc@redhat.com>
PR binutils/12752
* arm-dis.c (print_insn_coprocessor): Use bfd_vma type for
computing address offsets.
(print_arm_address): Likewise.
(print_insn_arm): Likewise.
(print_insn_thumb16): Likewise.
(print_insn_thumb32): Likewise.
2011-06-02 Jie Zhang <jie@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Maciej Rozycki <macro@codesourcery.com>
* arm-dis.c (print_insn_coprocessor): Explicitly print #-0
as address offset.
(print_arm_address): Likewise. Elide positive #0 appropriately.
(print_insn_arm): Likewise.
2011-06-02 Nick Clifton <nickc@redhat.com>
PR gas/12752
* arm-dis.c (print_insn_thumb32): Do not sign extend addresses
passed to print_address_func.
2011-06-02 Nick Clifton <nickc@redhat.com>
* arm-dis.c: Fix spelling mistakes.
* op/opcodes.pot: Regenerate.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.c: Replace S390_OPERAND_REG_EVEN with
S390_OPERAND_REG_PAIR. Fix INSTR_RRF_0UFEF instruction type.
* s390-opc.txt: Fix cxr instruction type.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.c: Add new instruction types marking register pair
operands.
* s390-opc.txt: Match instructions having register pair operands
to the new instruction types.
2011-05-19 Nick Clifton <nickc@redhat.com>
* v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2
operands.
2011-05-10 Quentin Neill <quentin.neill@amd.com>
* i386-gen.c (cpu_flag_init): Add new CPU_BDVER2_FLAGS.
* i386-init.h: Regenerated.
2011-04-27 Nick Clifton <nickc@redhat.com>
* po/da.po: Updated Danish translation.
2011-04-26 Anton Blanchard <anton@samba.org>
* ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7.
2011-04-21 DJ Delorie <dj@redhat.com>
* rx-decode.opc (rx_decode_opcode): Set the syntax for multi-byte NOPs.
* rx-decode.c: Regenerate.
2011-04-20 H.J. Lu <hongjiu.lu@intel.com>
* i386-init.h: Regenerated.
2011-04-19 Quentin Neill <quentin.neill@amd.com>
* i386-gen.c (cpu_flag_init): Remove 3dnow and 3dnowa bits
from bdver1 flags.
2011-04-13 Nick Clifton <nickc@redhat.com>
* v850-dis.c (disassemble): Always print a closing square brace if
an opening square brace was printed.
2011-04-12 Nick Clifton <nickc@redhat.com>
PR binutils/12534
* arm-dis.c (thumb32_opcodes): Add %L suffix to LDRD and STRD insn
patterns.
(print_insn_thumb32): Handle %L.
2011-04-11 Julian Brown <julian@codesourcery.com>
* arm-dis.c (psr_name): Fix typo for BASEPRI_MAX.
(print_insn_thumb32): Add APSR bitmask support.
2011-04-07 Paul Carroll<pcarroll@codesourcery.com>
* arm-dis.c (print_insn): init vars moved into private_data structure.
2011-03-24 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_dsp32mac_0): Move MM zeroing down to MAC0 logic.
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
post-increment to support LPM Z+ instruction. Add support for 'E'
constraint for DES instruction.
(print_insn_avr): Adjust calls to avr_operand. Rename variable.
2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
* arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.
2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
* arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
Use branch types instead.
(print_insn): Likewise.
2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (mips_builtin_opcodes): Correct register use
annotation of "alnv.ps".
2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (mips_builtin_opcodes): Add "pref" macro.
2011-02-22 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (OUTS): Remove p NULL check and txt NUL check.
2011-02-22 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (print_insn_bfin): Change outf->fprintf_func to OUTS.
2011-02-19 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (saved_state): Mark static. Change a[01]x to ax[] and
a[01]w to aw[]. Delete ac0, ac0_copy, ac1, an, aq, av0, av0s, av1,
av1s, az, cc, v, v_copy, vs, rnd_mod, v_internal, pc, ticks, insts,
exception, end_of_registers, msize, memory, bfd_mach.
(CCREG, PCREG, A0XREG, A0WREG, A1XREG, A1WREG, LC0REG, LT0REG,
LB0REG, LC1REG, LT1REG, LB1REG): Delete
(AXREG, AWREG, LCREG, LTREG, LBREG): Define.
(get_allreg): Change to new defines. Fallback to abort().
2011-02-14 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c: Add whitespace/parenthesis where needed.
2011-02-14 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_LoopSetup_0): Return when reg is greater
than 7.
2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* configure: Regenerate.
2011-02-13 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_dsp32alu_0): Fix typo with A1 reg.
2011-02-13 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_dsp32mult_0): Add 1 to dst for mac1. Output
dregs only when P is set, and dregs_lo otherwise.
2011-02-13 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_dsp32alu_0): Delete BYTEOP2M code.
2011-02-12 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (decode_pseudoDEBUG_0): Add space after PRNT.
2011-02-12 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (machine_registers): Delete REG_GP.
(reg_names): Delete "GP".
(decode_allregs): Change REG_GP to REG_LASTREG.
2011-02-12 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2,
M_IH, M_IU): Delete.
2011-02-11 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (reg_names): Add const.
(decode_dregs_lo, decode_dregs_hi, decode_dregs, decode_dregs_byte,
decode_pregs, decode_iregs, decode_mregs, decode_dpregs, decode_gregs,
decode_regs, decode_regs_lo, decode_regs_hi, decode_statbits,
decode_counters, decode_allregs): Likewise.
2011-02-09 Michael Snyder <msnyder@vmware.com>
* i386-dis.c (OP_J): Parenthesize expression to prevent
truncated addresses.
(print_insn): Fix indentation off-by-one.
2011-02-01 Nick Clifton <nickc@redhat.com>
* po/da.po: Updated Danish translation.
2011-01-21 Dave Murphy <davem@devkitpro.org>
* ppc-opc.c (NON32, NO371): Remove PPC_OPCODE_PPCPS.
2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (sIbT): New.
(b_T_mode): Likewise.
(dis386): Replace sIb with sIbT on "pushT".
(x86_64_table): Replace sIb with Ib on "aam" and "aad".
(OP_sI): Handle b_T_mode. Properly sign-extend byte.
2011-01-18 Jan Kratochvil <jan.kratochvil@redhat.com>
* i386-init.h: Regenerated.
* i386-tbl.h: Regenerated
2011-01-17 Quentin Neill <quentin.neill@amd.com>
* i386-dis.c (REG_XOP_TBM_01): New.
(REG_XOP_TBM_02): New.
(reg_table): Add REG_XOP_TBM_01 and REG_XOP_TBM_02 tables.
(xop_table): Redirect to REG_XOP_TBM_01 and REG_XOP_TBM_02
entries, and add bextr instruction.
* i386-gen.c (cpu_flag_init): Add CPU_TBM_FLAGS, CpuTBM.
(cpu_flags): Add CpuTBM.
* i386-opc.h (CpuTBM) New.
(i386_cpu_flags): Add bit cputbm.
* i386-opc.tbl: Add bextr, blcfill, blci, blcic, blcmsk,
blcs, blsfill, blsic, t1mskc, and tzmsk.
2011-01-12 DJ Delorie <dj@redhat.com>
* rx-dis.c (print_insn_rx): Support RX_Operand_TwoReg.
2011-01-11 Mingjie Xing <mingjie.xing@gmail.com>
* mips-dis.c (print_insn_args): Adjust the value to print the real
offset for "+c" argument.
2011-01-10 Nick Clifton <nickc@redhat.com>
* po/da.po: Updated Danish translation.
2011-01-05 Nathan Sidwell <nathan@codesourcery.com>
* arm-dis.c (thumb32_opcodes): BLX must have bit zero clear.
2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (REG_VEX_38F3): New.
(PREFIX_0FBC): Likewise.
(PREFIX_VEX_38F2): Likewise.
(PREFIX_VEX_38F3_REG_1): Likewise.
(PREFIX_VEX_38F3_REG_2): Likewise.
(PREFIX_VEX_38F3_REG_3): Likewise.
(PREFIX_VEX_38F7): Likewise.
(VEX_LEN_38F2_P_0): Likewise.
(VEX_LEN_38F3_R_1_P_0): Likewise.
(VEX_LEN_38F3_R_2_P_0): Likewise.
(VEX_LEN_38F3_R_3_P_0): Likewise.
(VEX_LEN_38F7_P_0): Likewise.
(dis386_twobyte): Use PREFIX_0FBC.
(reg_table): Add REG_VEX_38F3.
(prefix_table): Add PREFIX_0FBC, PREFIX_VEX_38F2,
PREFIX_VEX_38F3_REG_1, PREFIX_VEX_38F3_REG_2,
PREFIX_VEX_38F3_REG_3 and PREFIX_VEX_38F7.
(vex_table): Use PREFIX_VEX_38F2, REG_VEX_38F3 and
PREFIX_VEX_38F7.
(vex_len_table): Add VEX_LEN_38F2_P_0, VEX_LEN_38F3_R_1_P_0,
VEX_LEN_38F3_R_2_P_0, VEX_LEN_38F3_R_3_P_0 and
VEX_LEN_38F7_P_0.
* i386-gen.c (cpu_flag_init): Add CPU_BMI_FLAGS.
(cpu_flags): Add CpuBMI.
* i386-opc.h (CpuBMI): New.
(i386_cpu_flags): Add cpubmi.
* i386-opc.tbl: Add andn, bextr, blsi, blsmsk, blsr and tzcnt.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (VexGdq): New.
(OP_VEX): Handle dq_mode.
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright to 2011.
For older changes see ChangeLog-2010
Copyright (C) 2011 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: