gdb/doc/Makefile.in - binutils-gdb - Git at Google

 ##Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002
 ##Free Software Foundation, Inc.

 # Makefile for GDB documentation.
 # This file is part of GDB.

 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

 srcdir = @srcdir@
 VPATH = @srcdir@

 prefix = @prefix@

 infodir = @infodir@
 htmldir = $(prefix)/html

 SHELL = @SHELL@

 LN_S = @LN_S@

 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@

 # main GDB source directory
 gdbdir = $(srcdir)/..

 # where to find texinfo; GDB dist should include a recent one
 TEXIDIR=${gdbdir}/../texinfo

 # where to find makeinfo, preferably one designed for texinfo-2
 MAKEINFO=makeinfo

 # Note that texinfo 4.0's makeinfo --html can only generate a
 # single file, which would be too large, so continue to use
 # texi2html. -sts 2000-03-28

 MAKEHTML = texi2html
 MAKEHTMLFLAGS = -menu -split_chapter

 # where to find texi2roff, ditto
 TEXI2ROFF=texi2roff

 # where to find texi2dvi, ditto
 TEXI2DVI=texi2dvi

 # Where is the source dir for the READLINE library doc?
 # Traditionally readline is in .. or .
 READLINE_DIR = ${gdbdir}/../readline/doc

 # The GDB/MI docs come from a sibling directory ../mi
 GDBMI_DIR = ${gdbdir}/mi

 SET_TEXINPUTS = \
    TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS

 # Files which should be generated via 'info' and installed by 'install-info'
 INFO_DEPS = gdb.info gdbint.info stabs.info

 # There may be alternate predefined collections of switches to configure
 # the GDB manual.  Normally this is not done in synch with the software
 # config system, since this choice tends to be independent; most people
 # want a doc config of `all' for a generic manual, regardless of sw config.
 DOC_CONFIG = all

 # This list of sed edits will edit the GDB reference card
 # for what fonts and what papersize to use.
 # By default (NO edits applied), the refcard uses:
 #    - Computer Modern (CM) fonts
 #    - US letter paper (8.5x11in)
 # List some of the following files for alternative fonts and paper:
 #  a4rc.sed     use A4 paper (297 x 210 mm)
 #  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
 # lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
 # e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
 #      for A4, CM fonts:    REFEDITS = a4rc.sed
 #      for US, PS fonts:    REFEDITS = psrc.sed
 #      for default:
 REFEDITS =

 # Don Knuth's TeX formatter
 TEX = tex

 # Program to generate Postscript files from DVI files.
 DVIPS = dvips

 # Main GDB manual
 GDB_DOC_SOURCE_INCLUDES = \
 	$(srcdir)/fdl.texi \
 	$(srcdir)/gpl.texi \
 	$(READLINE_DIR)/rluser.texinfo \
 	$(READLINE_DIR)/inc-hist.texinfo
 GDB_DOC_BUILD_INCLUDES = \
 	gdb-cfg.texi \
 	GDBvn.texi
 GDB_DOC_FILES = \
 	$(srcdir)/gdb.texinfo \
 	$(GDB_DOC_SOURCE_INCLUDES) \
 	$(GDB_DOC_BUILD_INCLUDES)

 # Internals Manual
 GDBINT_DOC_SOURCE_INCLUDES = \
 	$(srcdir)/fdl.texi \
 	$(srcdir)/observer.texi
 GDBINT_DOC_BUILD_INCLUDES = \
 	gdb-cfg.texi \
 	GDBvn.texi
 GDBINT_DOC_FILES = \
 	$(srcdir)/gdbint.texinfo \
 	$(GDBINT_DOC_SOURCE_INCLUDES) \
 	$(GDBINT_DOC_BUILD_INCLUDES)

 # Stabs manual: All files
 STABS_DOC_SOURCE_INCLUDES =
 STABS_DOC_BUILD_INCLUDES =
 STABS_DOC_FILES = \
 	$(srcdir)/stabs.texinfo \
 	$(STABS_DOC_SOURCE_INCLUDES) \
 	$(STABS_DOC_BUILD_INCLUDES)

 #### Host, target, and site specific Makefile fragments come in here.
 ###

 all:

 info: $(INFO_DEPS)
 dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
 ps: gdb.ps gdbint.ps stabs.ps refcard.ps
 html: gdb_toc.html gdbint_toc.html stabs_toc.html
 pdf: gdb.pdf gdbint.pdf stabs.pdf
 all-doc: info dvi ps # pdf
 diststuff: info

 install-info: $(INFO_DEPS)
 	$(SHELL) $(srcdir)/../../mkinstalldirs $(infodir)
 	@list='$(INFO_DEPS)'; \
 	for file in $$list; do \
 	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
 	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
 	    if test -f $$d/$$ifile; then \
 	      echo " $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile"; \
 	      $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile; \
 	    else : ; fi; \
 	  done; \
 	done
 	$(POST_INSTALL)
 	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 	  list='$(INFO_DEPS)'; \
 	  for file in $$list; do \
 	    echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\
 	    install-info --info-dir=$(infodir) $(infodir)/$$file || :;\
 	  done; \
 	else : ; fi

 uninstall-info:
 	$(PRE_UNINSTALL)
 	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 	  ii=yes; \
 	else ii=; fi; \
 	list='$(INFO_DEPS)'; \
 	for file in $$list; do \
 	  test -z "$$ii" \
 	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
 	done
 	$(NORMAL_UNINSTALL)
 	list='$(INFO_DEPS)'; \
 	for file in $$list; do \
 	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
 	done

 install-html: html
 	for i in *.html ; do \
 		$(INSTALL_DATA) $$i $(htmldir)/$$i ; \
 	done

 STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf

 # Copy the object files from a particular stage into a subdirectory.
 stage1: force
 	-mkdir stage1
 	-mv $(STAGESTUFF) stage1

 stage2: force
 	-mkdir stage2
 	-mv $(STAGESTUFF) stage2

 stage3: force
 	-mkdir stage3
 	-mv $(STAGESTUFF) stage3

 against=stage2

 comparison: force
 	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done

 de-stage1: force
 	-(cd stage1 ; mv -f * ..)
 	-rmdir stage1

 de-stage2: force
 	-(cd stage2 ; mv -f * ..)
 	-rmdir stage2

 de-stage3: force
 	-(cd stage3 ; mv -f * ..)
 	-rmdir stage3

 # GDB QUICK REFERENCE (dvi output)
 refcard.dvi : refcard.tex $(REFEDITS)
 	echo > tmp.sed
 	for f in x $(REFEDITS) ; do \
 		test x$$f = xx && continue ; \
 		cat $(srcdir)/$$f >>tmp.sed ; \
 	done
 	sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
 	$(SET_TEXINPUTS) $(TEX) sedref.tex
 	mv sedref.dvi refcard.dvi
 	rm -f sedref.log sedref.tex tmp.sed

 refcard.ps : refcard.dvi
 	$(DVIPS) -t landscape -o $@ $?

 # File to record current GDB version number (copied from main dir version.in)
 GDBvn.texi : ${gdbdir}/version.in
 	echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new
 	mv GDBvn.new GDBvn.texi

 # Updated atomically
 .PRECIOUS: GDBvn.texi

 # Choose configuration for GDB manual (normally `all'; normally not tied into
 # `configure' script because most users prefer generic version of manual,
 # not one for their binary config---which may not be specifically
 # defined anyways).
 gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
 	(test "$$LN_S" = "ln -s" && \
 	  ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
 	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
 	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi

 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
 # If your texinfo or makeinfo don't support these, get a new texinfo release
 #
 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
 #   Note that we can *generate* GDBvn.texi, but since we distribute one in the
 #   source directory for the benefit of people who *don't* use this makefile,
 #   VPATH will often tell make not to bother building it, because the one
 #   in the srcdir is up to date.  (if not, then make should build one here).

 # Clean these up before each run.  Avoids a catch 22 with not being
 # able to re-generate these files (to fix a corruption) because these
 # files contain a corruption.
 GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
 	gdb.tp* gdb.vr*

 # GDB MANUAL: TeX dvi file
 gdb.dvi: ${GDB_DOC_FILES}
 	if [ ! -f ./GDBvn.texi ]; then \
 		(test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 		ln $(srcdir)/GDBvn.texi . || \
 		cp $(srcdir)/GDBvn.texi . ; else true; fi
 	rm -f $(GDB_TEX_TMPS)
 	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo

 gdb.ps: gdb.dvi
 	$(DVIPS) -o $@ $?

 gdb.pdf: ${GDB_DOC_FILES}
 	if [ ! -f ./GDBvn.texi ]; then \
 		(test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 		ln $(srcdir)/GDBvn.texi . || \
 		cp $(srcdir)/GDBvn.texi . ; else true; fi
 	rm -f $(GDB_TEX_TMPS)
 	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo

 # GDB MANUAL: info file
 gdb.info: ${GDB_DOC_FILES}
 	$(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \
 		-o gdb.info $(srcdir)/gdb.texinfo

 # GDB MANUAL: roff translations
 # Try to use a recent texi2roff.  v2 was put on prep in jan91.
 # If you want an index, see texi2roff doc for postprocessing
 # and add -i to texi2roff invocations below.
 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
 #    corresponding -e lines when later texi2roff's are current)
 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
 # + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
 # + @alphaenumerate is ridiculously new, turned into @enumerate

 # texi2roff doesn't have a notion of include dirs, so we have to fake
 # it out for gdb manual's include files---but only if not configured
 # in main sourcedir.
 links2roff: $(GDB_DOC_SOURCE_INCLUDES)
 	if [ ! -f gdb.texinfo ]; then \
 		(test "$$LN_S" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) || \
 		ln $(GDB_DOC_SOURCE_INCLUDES)    . || \
 		cp $(GDB_DOC_SOURCE_INCLUDES)    . ; \
 	fi
 	touch links2roff

 # gdb manual suitable for [gtn]roff -me
 gdb.me: $(GDB_DOC_FILES) links2roff
 	sed -e '/\\input texinfo/d' \
 		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 		-e '/^@ifinfo/,/^@end ifinfo/d' \
 		-e '/^@c /d' \
 		-e 's/{.*,,/{/' \
 		-e 's/@ / /g' \
 		-e 's/^@alphaenumerate/@enumerate/g' \
 		-e 's/^@end alphaenumerate/@end enumerate/g' \
 		$(srcdir)/gdb.texinfo | \
 	$(TEXI2ROFF) -me | \
 	sed -e 's/---/\\(em/g' \
 	>gdb.me

 # gdb manual suitable for [gtn]roff -ms
 gdb.ms: $(GDB_DOC_FILES) links2roff
 	sed -e '/\\input texinfo/d' \
 		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 		-e '/^@ifinfo/,/^@end ifinfo/d' \
 		-e '/^@c /d' \
 		-e 's/{.*,,/{/' \
 		-e 's/@ / /g' \
 		-e 's/^@alphaenumerate/@enumerate/g' \
 		-e 's/^@end alphaenumerate/@end enumerate/g' \
 		$(srcdir)/gdb.texinfo | \
 	$(TEXI2ROFF) -ms | \
 	sed -e 's/---/\\(em/g' \
 	>gdb.ms

 # gdb manual suitable for [tn]roff -mm
 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
 #   try leaving them in
 gdb.mm: $(GDB_DOC_FILES) links2roff
 	sed -e '/\\input texinfo/d' \
 		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 		-e '/^@ifinfo/,/^@end ifinfo/d' \
 		-e '/^@c /d' \
 		-e 's/{.*,,/{/' \
 		-e '/@noindent/d' \
 		-e 's/@ / /g' \
 		-e 's/^@alphaenumerate/@enumerate/g' \
 		-e 's/^@end alphaenumerate/@end enumerate/g' \
 		$(srcdir)/gdb.texinfo | \
 	$(TEXI2ROFF) -mm | \
 	sed -e 's/---/\\(em/g' \
 	>gdb.mm

 # GDB MANUAL: HTML file

 gdb_toc.html: ${GDB_DOC_FILES}
 	$(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo

 # Clean these up before each run.  Avoids a catch 22 with not being
 # able to re-generate these files (to fix a corruption) because these
 # files contain a corruption.
 GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
 	gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*

 # GDB INTERNALS MANUAL: TeX dvi file
 gdbint.dvi: $(GDBINT_DOC_FILES)
 	rm -f $(GDBINT_TEX_TMPS)
 	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo

 gdbint.ps : gdbint.dvi
 	$(DVIPS) -o $@ $?

 gdbint.pdf: $(GDBINT_DOC_FILES)
 	rm -f $(GDBINT_TEX_TMPS)
 	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo

 # GDB INTERNALS MANUAL: info file

 gdbint.info: $(GDBINT_DOC_FILES)
 	$(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo

 # GDB INTERNALS MANUAL: HTML file

 gdbint_toc.html: $(GDBINT_DOC_FILES)
 	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo

 stabs.info: $(STABS_DOC_FILES)
 	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo

 # STABS DOCUMENTATION: HTML file

 stabs_toc.html: $(STABS_DOC_FILES)
 	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo

 # Clean these up before each run.  Avoids a catch 22 with not being
 # able to re-generate these files (to fix a corruption) because these
 # files contain a corruption.
 STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
 	stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*

 # STABS DOCUMENTATION: TeX dvi file
 stabs.dvi : $(STABS_DOC_FILES)
 	rm -f $(STABS_TEX_TMPS)
 	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo

 stabs.ps: stabs.dvi
 	$(DVIPS) -o $@ $?

 stabs.pdf: $(STABS_DOC_FILES)
 	rm -f $(STABS_TEX_TMPS)
 	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo

 force:

 Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
 	$(SHELL) ./config.status


 # The "least clean" level of cleaning.  Get rid of files which are
 # automatically generated files that are just intermediate files,

 mostlyclean:
 	rm -f gdb.mm gdb.ms gdb.me links2roff
 	rm -f $(GDB_TEX_TMPS)
 	rm -f $(GDBINT_TEX_TMPS)
 	rm -f $(STABS_TEX_TMPS)
 	rm -f sedref.dvi sedref.tex tmp.sed

 clean: mostlyclean
 	rm -f gdb-cfg.texi

 distclean: clean
 	rm -f Makefile config.status config.log

 # GDBvn.texi, the dvi files, the info files, and the postscript files,
 # are all part of the distribution, so it should not be removed by
 # "clean" or "distclean".  Use maintainer-clean to remove them.

 maintainer-clean realclean: distclean
 	rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf

 install: install-info

 uninstall: uninstall-info
	##Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002
	##Free Software Foundation, Inc.

	# Makefile for GDB documentation.
	# This file is part of GDB.

	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2 of the License, or
	# (at your option) any later version.
	#
	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.
	#
	# You should have received a copy of the GNU General Public License
	# along with this program; if not, write to the Free Software
	# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

	srcdir = @srcdir@
	VPATH = @srcdir@

	prefix = @prefix@

	infodir = @infodir@
	htmldir = $(prefix)/html

	SHELL = @SHELL@

	LN_S = @LN_S@

	INSTALL = @INSTALL@
	INSTALL_PROGRAM = @INSTALL_PROGRAM@
	INSTALL_DATA = @INSTALL_DATA@

	# main GDB source directory
	gdbdir = $(srcdir)/..

	# where to find texinfo; GDB dist should include a recent one
	TEXIDIR=${gdbdir}/../texinfo

	# where to find makeinfo, preferably one designed for texinfo-2
	MAKEINFO=makeinfo

	# Note that texinfo 4.0's makeinfo --html can only generate a
	# single file, which would be too large, so continue to use
	# texi2html. -sts 2000-03-28

	MAKEHTML = texi2html
	MAKEHTMLFLAGS = -menu -split_chapter

	# where to find texi2roff, ditto
	TEXI2ROFF=texi2roff

	# where to find texi2dvi, ditto
	TEXI2DVI=texi2dvi

	# Where is the source dir for the READLINE library doc?
	# Traditionally readline is in .. or .
	READLINE_DIR = ${gdbdir}/../readline/doc

	# The GDB/MI docs come from a sibling directory ../mi
	GDBMI_DIR = ${gdbdir}/mi

	SET_TEXINPUTS = \
	TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS

	# Files which should be generated via 'info' and installed by 'install-info'
	INFO_DEPS = gdb.info gdbint.info stabs.info

	# There may be alternate predefined collections of switches to configure
	# the GDB manual. Normally this is not done in synch with the software
	# config system, since this choice tends to be independent; most people
	# want a doc config of `all' for a generic manual, regardless of sw config.
	DOC_CONFIG = all

	# This list of sed edits will edit the GDB reference card
	# for what fonts and what papersize to use.
	# By default (NO edits applied), the refcard uses:
	# - Computer Modern (CM) fonts
	# - US letter paper (8.5x11in)
	# List some of the following files for alternative fonts and paper:
	# a4rc.sed use A4 paper (297 x 210 mm)
	# psrc.sed use PostScript fonts (Karl Berry short TeX names)
	# lpsrc.sed use PostScript fonts (full PostScript names in TeX)
	# e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed
	# for A4, CM fonts: REFEDITS = a4rc.sed
	# for US, PS fonts: REFEDITS = psrc.sed
	# for default:
	REFEDITS =

	# Don Knuth's TeX formatter
	TEX = tex

	# Program to generate Postscript files from DVI files.
	DVIPS = dvips

	# Main GDB manual
	GDB_DOC_SOURCE_INCLUDES = \
	$(srcdir)/fdl.texi \
	$(srcdir)/gpl.texi \
	$(READLINE_DIR)/rluser.texinfo \
	$(READLINE_DIR)/inc-hist.texinfo
	GDB_DOC_BUILD_INCLUDES = \
	gdb-cfg.texi \
	GDBvn.texi
	GDB_DOC_FILES = \
	$(srcdir)/gdb.texinfo \
	$(GDB_DOC_SOURCE_INCLUDES) \
	$(GDB_DOC_BUILD_INCLUDES)

	# Internals Manual
	GDBINT_DOC_SOURCE_INCLUDES = \
	$(srcdir)/fdl.texi \
	$(srcdir)/observer.texi
	GDBINT_DOC_BUILD_INCLUDES = \
	gdb-cfg.texi \
	GDBvn.texi
	GDBINT_DOC_FILES = \
	$(srcdir)/gdbint.texinfo \
	$(GDBINT_DOC_SOURCE_INCLUDES) \
	$(GDBINT_DOC_BUILD_INCLUDES)

	# Stabs manual: All files
	STABS_DOC_SOURCE_INCLUDES =
	STABS_DOC_BUILD_INCLUDES =
	STABS_DOC_FILES = \
	$(srcdir)/stabs.texinfo \
	$(STABS_DOC_SOURCE_INCLUDES) \
	$(STABS_DOC_BUILD_INCLUDES)

	#### Host, target, and site specific Makefile fragments come in here.
	###

	all:

	info: $(INFO_DEPS)
	dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
	ps: gdb.ps gdbint.ps stabs.ps refcard.ps
	html: gdb_toc.html gdbint_toc.html stabs_toc.html
	pdf: gdb.pdf gdbint.pdf stabs.pdf
	all-doc: info dvi ps # pdf
	diststuff: info

	install-info: $(INFO_DEPS)
	$(SHELL) $(srcdir)/../../mkinstalldirs $(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	if test -f $$file; then d=.; else d=$(srcdir); fi; \
	for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	if test -f $$d/$$ifile; then \
	echo " $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile"; \
	$(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile; \
	else : ; fi; \
	done; \
	done
	$(POST_INSTALL)
	@if $(SHELL) -c 'install-info --version \| sed 1q \| fgrep -s -v -i debian' >/dev/null 2>&1; then \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\
	install-info --info-dir=$(infodir) $(infodir)/$$file \|\| :;\
	done; \
	else : ; fi

	uninstall-info:
	$(PRE_UNINSTALL)
	@if $(SHELL) -c 'install-info --version \| sed 1q \| fgrep -s -v -i debian' >/dev/null 2>&1; then \
	ii=yes; \
	else ii=; fi; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	test -z "$$ii" \
	\|\| install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
	done
	$(NORMAL_UNINSTALL)
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	(cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	done

	install-html: html
	for i in *.html ; do \
	$(INSTALL_DATA) $$i $(htmldir)/$$i ; \
	done

	STAGESTUFF = .info gdb-all.texi GDBvn.texi .ps .dvi *.pdf

	# Copy the object files from a particular stage into a subdirectory.
	stage1: force
	-mkdir stage1
	-mv $(STAGESTUFF) stage1

	stage2: force
	-mkdir stage2
	-mv $(STAGESTUFF) stage2

	stage3: force
	-mkdir stage3
	-mv $(STAGESTUFF) stage3

	against=stage2

	comparison: force
	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done

	de-stage1: force
	-(cd stage1 ; mv -f * ..)
	-rmdir stage1

	de-stage2: force
	-(cd stage2 ; mv -f * ..)
	-rmdir stage2

	de-stage3: force
	-(cd stage3 ; mv -f * ..)
	-rmdir stage3

	# GDB QUICK REFERENCE (dvi output)
	refcard.dvi : refcard.tex $(REFEDITS)
	echo > tmp.sed
	for f in x $(REFEDITS) ; do \
	test x$$f = xx && continue ; \
	cat $(srcdir)/$$f >>tmp.sed ; \
	done
	sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
	$(SET_TEXINPUTS) $(TEX) sedref.tex
	mv sedref.dvi refcard.dvi
	rm -f sedref.log sedref.tex tmp.sed

	refcard.ps : refcard.dvi
	$(DVIPS) -t landscape -o $@ $?

	# File to record current GDB version number (copied from main dir version.in)
	GDBvn.texi : ${gdbdir}/version.in
	echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new
	mv GDBvn.new GDBvn.texi

	# Updated atomically
	.PRECIOUS: GDBvn.texi

	# Choose configuration for GDB manual (normally `all'; normally not tied into
	# `configure' script because most users prefer generic version of manual,
	# not one for their binary config---which may not be specifically
	# defined anyways).
	gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
	(test "$$LN_S" = "ln -s" && \
	ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) \|\| \
	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi \|\| \
	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi

	# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
	# If your texinfo or makeinfo don't support these, get a new texinfo release
	#
	# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
	# Note that we can generate GDBvn.texi, but since we distribute one in the
	# source directory for the benefit of people who don't use this makefile,
	# VPATH will often tell make not to bother building it, because the one
	# in the srcdir is up to date. (if not, then make should build one here).

	# Clean these up before each run. Avoids a catch 22 with not being
	# able to re-generate these files (to fix a corruption) because these
	# files contain a corruption.
	GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
	gdb.tp* gdb.vr*

	# GDB MANUAL: TeX dvi file
	gdb.dvi: ${GDB_DOC_FILES}
	if [ ! -f ./GDBvn.texi ]; then \
	(test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) \|\| \
	ln $(srcdir)/GDBvn.texi . \|\| \
	cp $(srcdir)/GDBvn.texi . ; else true; fi
	rm -f $(GDB_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo

	gdb.ps: gdb.dvi
	$(DVIPS) -o $@ $?

	gdb.pdf: ${GDB_DOC_FILES}
	if [ ! -f ./GDBvn.texi ]; then \
	(test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) \|\| \
	ln $(srcdir)/GDBvn.texi . \|\| \
	cp $(srcdir)/GDBvn.texi . ; else true; fi
	rm -f $(GDB_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo

	# GDB MANUAL: info file
	gdb.info: ${GDB_DOC_FILES}
	$(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \
	-o gdb.info $(srcdir)/gdb.texinfo

	# GDB MANUAL: roff translations
	# Try to use a recent texi2roff. v2 was put on prep in jan91.
	# If you want an index, see texi2roff doc for postprocessing
	# and add -i to texi2roff invocations below.
	# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
	# corresponding -e lines when later texi2roff's are current)
	# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
	# + @c's deleted explicitly because texi2roff sees texinfo commands in them
	# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
	# + @alphaenumerate is ridiculously new, turned into @enumerate

	# texi2roff doesn't have a notion of include dirs, so we have to fake
	# it out for gdb manual's include files---but only if not configured
	# in main sourcedir.
	links2roff: $(GDB_DOC_SOURCE_INCLUDES)
	if [ ! -f gdb.texinfo ]; then \
	(test "$$LN_S" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) \|\| \
	ln $(GDB_DOC_SOURCE_INCLUDES) . \|\| \
	cp $(GDB_DOC_SOURCE_INCLUDES) . ; \
	fi
	touch links2roff

	# gdb manual suitable for [gtn]roff -me
	gdb.me: $(GDB_DOC_FILES) links2roff
	sed -e '/\\input texinfo/d' \
	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	-e '/^@ifinfo/,/^@end ifinfo/d' \
	-e '/^@c /d' \
	-e 's/{.*,,/{/' \
	-e 's/@ / /g' \
	-e 's/^@alphaenumerate/@enumerate/g' \
	-e 's/^@end alphaenumerate/@end enumerate/g' \
	$(srcdir)/gdb.texinfo \| \
	$(TEXI2ROFF) -me \| \
	sed -e 's/---/\\(em/g' \
	>gdb.me

	# gdb manual suitable for [gtn]roff -ms
	gdb.ms: $(GDB_DOC_FILES) links2roff
	sed -e '/\\input texinfo/d' \
	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	-e '/^@ifinfo/,/^@end ifinfo/d' \
	-e '/^@c /d' \
	-e 's/{.*,,/{/' \
	-e 's/@ / /g' \
	-e 's/^@alphaenumerate/@enumerate/g' \
	-e 's/^@end alphaenumerate/@end enumerate/g' \
	$(srcdir)/gdb.texinfo \| \
	$(TEXI2ROFF) -ms \| \
	sed -e 's/---/\\(em/g' \
	>gdb.ms

	# gdb manual suitable for [tn]roff -mm
	# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
	# try leaving them in
	gdb.mm: $(GDB_DOC_FILES) links2roff
	sed -e '/\\input texinfo/d' \
	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	-e '/^@ifinfo/,/^@end ifinfo/d' \
	-e '/^@c /d' \
	-e 's/{.*,,/{/' \
	-e '/@noindent/d' \
	-e 's/@ / /g' \
	-e 's/^@alphaenumerate/@enumerate/g' \
	-e 's/^@end alphaenumerate/@end enumerate/g' \
	$(srcdir)/gdb.texinfo \| \
	$(TEXI2ROFF) -mm \| \
	sed -e 's/---/\\(em/g' \
	>gdb.mm

	# GDB MANUAL: HTML file

	gdb_toc.html: ${GDB_DOC_FILES}
	$(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo

	# Clean these up before each run. Avoids a catch 22 with not being
	# able to re-generate these files (to fix a corruption) because these
	# files contain a corruption.
	GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
	gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*

	# GDB INTERNALS MANUAL: TeX dvi file
	gdbint.dvi: $(GDBINT_DOC_FILES)
	rm -f $(GDBINT_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo

	gdbint.ps : gdbint.dvi
	$(DVIPS) -o $@ $?

	gdbint.pdf: $(GDBINT_DOC_FILES)
	rm -f $(GDBINT_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo

	# GDB INTERNALS MANUAL: info file

	gdbint.info: $(GDBINT_DOC_FILES)
	$(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo

	# GDB INTERNALS MANUAL: HTML file

	gdbint_toc.html: $(GDBINT_DOC_FILES)
	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo

	stabs.info: $(STABS_DOC_FILES)
	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo

	# STABS DOCUMENTATION: HTML file

	stabs_toc.html: $(STABS_DOC_FILES)
	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo

	# Clean these up before each run. Avoids a catch 22 with not being
	# able to re-generate these files (to fix a corruption) because these
	# files contain a corruption.
	STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
	stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*

	# STABS DOCUMENTATION: TeX dvi file
	stabs.dvi : $(STABS_DOC_FILES)
	rm -f $(STABS_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo

	stabs.ps: stabs.dvi
	$(DVIPS) -o $@ $?

	stabs.pdf: $(STABS_DOC_FILES)
	rm -f $(STABS_TEX_TMPS)
	$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo

	force:

	Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
	$(SHELL) ./config.status


	# The "least clean" level of cleaning. Get rid of files which are
	# automatically generated files that are just intermediate files,

	mostlyclean:
	rm -f gdb.mm gdb.ms gdb.me links2roff
	rm -f $(GDB_TEX_TMPS)
	rm -f $(GDBINT_TEX_TMPS)
	rm -f $(STABS_TEX_TMPS)
	rm -f sedref.dvi sedref.tex tmp.sed

	clean: mostlyclean
	rm -f gdb-cfg.texi

	distclean: clean
	rm -f Makefile config.status config.log

	# GDBvn.texi, the dvi files, the info files, and the postscript files,
	# are all part of the distribution, so it should not be removed by
	# "clean" or "distclean". Use maintainer-clean to remove them.

	maintainer-clean realclean: distclean
	rm -f GDBvn.texi .info .dvi .ps .html .pdf

	install: install-info

	uninstall: uninstall-info