| # Copyright 1998, 1999, 2000, 2001 |
| # Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| # This file was written by Elena Zannoni (ezannoni@cygnus.com) |
| |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| set prms_id 0 |
| set bug_id 0 |
| |
| set testfile "call-ar-st" |
| set srcfile ${testfile}.c |
| set binfile ${objdir}/${subdir}/${testfile} |
| |
| # Test depends on printf, which the sparclet stub doesn't support. |
| if { [istarget "sparclet-*-*"] } { |
| return 0; |
| } |
| |
| if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { |
| gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." |
| } |
| |
| |
| # Create and source the file that provides information about the compiler |
| # used to compile the test case. |
| |
| if [get_compiler_info ${binfile}] { |
| return -1; |
| } |
| |
| # Some targets can't call functions, so don't even bother with this |
| # test. |
| if [target_info exists gdb,cannot_call_functions] { |
| setup_xfail "*-*-*" 2416 |
| fail "This target can not call functions" |
| continue |
| } |
| |
| set oldtimeout $timeout |
| set timeout [expr "$timeout + 60"] |
| |
| # Set the current language to C. This counts as a test. If it |
| # fails, then we skip the other tests. |
| |
| proc set_lang_c {} { |
| global gdb_prompt |
| |
| send_gdb "set language c\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" {} |
| timeout { fail "set language c (timeout)" ; return 0; } |
| } |
| |
| send_gdb "show language\n" |
| gdb_expect { |
| -re ".* source language is \"c\".*$gdb_prompt $" { |
| pass "set language to \"c\"" |
| return 1 |
| } |
| -re ".*$gdb_prompt $" { |
| fail "setting language to \"c\"" |
| return 0 |
| } |
| timeout { |
| fail "can't show language (timeout)" |
| return 0 |
| } |
| } |
| } |
| |
| source ${binfile}.ci |
| |
| # Start with a fresh gdb. |
| |
| gdb_exit |
| gdb_start |
| gdb_reinitialize_dir $srcdir/$subdir |
| gdb_load ${binfile} |
| send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $" |
| send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $" |
| send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $" |
| |
| |
| if ![runto_main] then { |
| perror "couldn't run to breakpoint" |
| continue |
| } |
| |
| #go -until 1209 |
| gdb_test "tbreak 1209" \ |
| "Breakpoint \[0-9\]+.*file.*$srcfile, line 1209.*" \ |
| "tbreakpoint line 1209" |
| |
| gdb_test continue \ |
| "Continuing\\..*main \\(\\) at.*$srcfile:1209.*" \ |
| "run until breakpoint set at a line" |
| |
| |
| #call print_double_array(double_array) |
| if {![gdb_skip_float_test "print print_double_array(double_array)"] && \ |
| ![gdb_skip_stdio_test "print print_double_array(double_array)"] } { |
| send_gdb "print print_double_array(double_array)\n" |
| gdb_expect_list "print print_double_array(double_array)" ".*$gdb_prompt $" { |
| "\[ \t\r\n\]+array_d :" |
| "\[ \t\r\n\]+=========" |
| "\[ \t\r\n\]+0.000000" |
| "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]" |
| "\[ \t\r\n\]+" |
| } |
| } |
| |
| #call print_char_array(char_array) |
| |
| if ![gdb_skip_stdio_test "print_char_array(char_array)"] { |
| send_gdb "print print_char_array(char_array)\n" |
| gdb_expect_list "print print_char_array(char_array)" ".*$gdb_prompt $" { |
| "\[ \t\r\n\]+array_c :" |
| "\[ \t\r\n\]+=========" |
| "\[ \t\r\n\]+\[ \t\r\n\]+Z" |
| "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" |
| "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" |
| "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+" |
| } |
| } |
| |
| |
| |
| |
| #go -until 1216 |
| gdb_test "tbreak 1216" \ |
| "Breakpoint.*file.*$srcfile, line 1216.*" \ |
| "tbreakpoint line 1216" |
| |
| if ![gdb_skip_stdio_test "continue to 1216"] { |
| send_gdb "continue\n" |
| gdb_expect_list "continue to 1216" ".*$gdb_prompt $" { |
| "\[ \t\r\n\]+array_c :" |
| "\[ \t\r\n\]+=========" |
| "\[ \t\r\n\]+\[ \t\r\n\]+Z" |
| "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" |
| "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" |
| "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa" |
| "\[ \t\r\n\]+main.*at.*:1216" |
| "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)" |
| } |
| } else { |
| gdb_test "continue" "" "" |
| } |
| |
| # I am disabling this test, because it takes too long. I verified by |
| # hand that it works, feel free to check for yourself. |
| #call print_all_arrays(integer_array, char_array, float_array, double_array) |
| #send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n" |
| #gdb_expect { |
| # -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1 -2 -3 -4 -5 -6 -7 -8\[ \t\r\n\]+-9 -10 -11 -12 -13 -14 -15 -16\[ \t\r\n\]+-17 -18 -19 -20 -21 -22 -23 -24\[ \t\r\n\]+-25 -26 -27 -28 -29 -30 -31 -32\[ \t\r\n\]+-33 -34 -35 -36 -37 -38 -39 -40\[ \t\r\n\]+-41 -42 -43 -44 -45 -46 -47 -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450 0.284900 0.427350 0.569801 0.712251 0.854701 0.997151 1.139601\[ \t\r\n\]+1.282051 1.424501 1.566952 1.709402 1.851852 1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800\[ \t\r\n\]+586.41750 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200\[ \t\r\n\]+2275.299900 2298.756600 2322.213300.*$gdb_prompt $" { |
| # pass "print print_all_arrays(integer_array, char_array, float_array, double_array)" |
| # } |
| # -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" } |
| # timeout { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" } |
| # } |
| |
| #set timeout $oldtimeout |
| #go -until 1220 |
| gdb_test "tbreak 1220" \ |
| "Breakpoint.* file .*$srcfile, line 1220.*" \ |
| "tbreakpoint line 1220" |
| |
| if {![gdb_skip_float_test "continuing to breakpoint 1220"] && \ |
| ![gdb_skip_stdio_test "continuing to breakpoint 1220"] } { |
| send_gdb "continue\n" |
| gdb_expect_list "continuing to breakpoint 1220" ".*$gdb_prompt $" { |
| "Continuing\\." |
| "\[ \t\r\n\]+array_d :" |
| "\[ \t\r\n\]+=========" |
| "\[ \t\r\n\]+0.000000" |
| "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" |
| "\[ \t\r\n\]+" |
| ".*array_f :" |
| ".*student id :\[\t \]+.*YELLOW" |
| ".*array_i :" |
| ".*main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)." |
| } |
| } else { |
| gdb_test "continue" "" "" |
| } |
| |
| #step |
| send_gdb "step\n" |
| gdb_expect { |
| -re "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*$gdb_prompt $" {pass "step inside print_all_arrays"} |
| -re ".*$gdb_prompt $" { fail "step inside print_all_arrays" } |
| timeout { fail "step inside print_all_arrays (timeout)" } |
| } |
| |
| |
| #step -over |
| if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] { |
| send_gdb "next\n" |
| gdb_expect { |
| -re "array_i :.*307.*print_char_array.*$gdb_prompt $" { |
| pass "next over print_int_array in print-all_arrays" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "next over print_int_array in print-all_arrays" |
| } |
| timeout { |
| fail "next over print_int_array in print-all_arrays (timeout)" |
| } |
| } |
| } else { |
| gdb_test "next" "" "" |
| } |
| |
| #call print_double_array(array_d) |
| if {![gdb_skip_float_test "print print_double_array(array_d)"] && \ |
| ![gdb_skip_stdio_test "print print_double_array(array_d)"] } { |
| send_gdb "print print_double_array(array_d)\n" |
| gdb_expect_list "print print_double_array(array_d)" ".*$gdb_prompt $" { |
| "array_d :" |
| "\[ \t\r\n\]+=========" |
| "\[ \t\r\n\]+\[ \t\r\n\]+0.000000" |
| "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" |
| "\[ \t\r\n\]+" |
| } |
| } |
| |
| #go -until 1236 |
| gdb_test "tbreak 1236" \ |
| "Breakpoint.* file .*$srcfile, line 1236.*" \ |
| "tbreakpoint line 1236" |
| |
| if {![gdb_skip_float_test "continuing to 1236"] && \ |
| ![gdb_skip_stdio_test "continuing to 1236"] } { |
| send_gdb "continue\n" |
| gdb_expect_list "continuing to 1236" ".*$gdb_prompt $" { |
| "Continuing\\..*array_c" |
| ".*array_f" |
| "\[ \t\r\n\]+array_d :" |
| "\[ \t\r\n\]+=========" |
| "\[ \t\r\n\]+0.000000" |
| "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" |
| "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)." |
| } |
| } else { |
| gdb_test "continue" "" "" |
| } |
| |
| |
| #call sum_array_print(10, *list1, *list2, *list3, *list4) |
| |
| if ![gdb_skip_stdio_test "print sum_array_print(...)"] { |
| send_gdb "print sum_array_print(10, *list1, *list2, *list3, *list4)\n" |
| gdb_expect { |
| -re ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*$gdb_prompt $" { |
| pass "print sum_array_print(10, *list1, *list2, *list3, *list4)" |
| } |
| -re ".*$gdb_prompt $" { fail "print sum_array_print(10, *list1, *list2, *list3, *list4)" } |
| timeout { fail "(timeout) print sum_array_print(10, *list1, *list2, *list3, *list4)" } |
| } |
| } |
| |
| #step over |
| if ![gdb_skip_stdio_test "next to 1237"] { |
| send_gdb "next\n" |
| gdb_expect { |
| -re ".*BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*$gdb_prompt $" { pass "next to 1237"} |
| -re ".*$gdb_prompt $" { fail "next to 1237" } |
| timeout { fail "next to 1237(timeout)" } |
| } |
| } else { |
| gdb_test "next" "" "" |
| } |
| |
| #call print_array_rep(\*list1, \*list2, \*list3) |
| |
| if ![gdb_skip_stdio_test "print print_array_rep(...)"] { |
| send_gdb "print print_array_rep(\*list1, \*list2, \*list3)\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" { |
| pass "print print_array_rep(*list1, *list2, *list3)" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "print print_array_rep(*list1, *list2, *list3)" |
| } |
| timeout { |
| fail "(timeout) print print_array_rep(*list1, *list2, *list3)" |
| } |
| } |
| } |
| |
| #go -until 1241 |
| gdb_test "tbreak 1241" \ |
| "Breakpoint..* file .*$srcfile, line 1241.*" \ |
| "tbreakpoint line 1241" |
| |
| send_gdb "continue\n" |
| gdb_expect { |
| -re ".*main \\(\\) at .*call-ar-st.c:1241\r\n1241\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*$gdb_prompt $" { |
| pass "continue to 1241"} |
| -re ".*$gdb_prompt $" { fail "continue to 1241"} |
| timeout { fail "(timeout) continue to 1241"} |
| } |
| |
| |
| |
| # Run into sum_array_print, and verify that the arguments were passed |
| # accurately. |
| # |
| # Note that we shouldn't use a `step' here to get into |
| # sum_array_print; GCC may emit calls to memcpy to put the arguments |
| # in the right place, and a step may end up in memcpy instead. This |
| # may itself be a bug, but it's not the one we're trying to catch |
| # here. I've added something to step-test.exp for this. |
| gdb_test "break sum_array_print" \ |
| ".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \ |
| "set breakpoint in sum_array_print" |
| gdb_test "continue" \ |
| ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \ |
| "check args of sum_array_print" |
| |
| #call print_array_rep(linked_list1, linked_list2, linked_list3) |
| # this calls works from gdb without gdb_expect. But it does seem to hang |
| #from within gdb_expect. |
| #I comment this out |
| #send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n" |
| #gdb_expect { |
| # -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" { |
| # pass "print print_array_rep(linked_list1, linked_list2, linked_list3)" |
| # } |
| # -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" } |
| # timeout { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" } |
| #} |
| |
| |
| #go -until 1281 |
| gdb_test "tbreak 1281" \ |
| "Breakpoint.* file .*call-ar-st.c, line 1281.*" \ |
| "tbreakpoint line 1281" |
| |
| if ![gdb_skip_stdio_test "continuing to 1281"] { |
| send_gdb "continue\n" |
| gdb_expect { |
| -re "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*$gdb_prompt $" { |
| pass "continue to 1281" |
| } |
| -re ".*$gdb_prompt $" { fail "continue to 1281"} |
| timeout { fail "(timeout) continue to 1281"} |
| } |
| } else { |
| gdb_test "continue" "" "" |
| } |
| |
| #call print_small_structs(*struct1, *struct2, *struct3, *struct4, |
| # *flags, *flags_combo, *three_char, *five_char, |
| # *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3) |
| |
| if {![gdb_skip_float_test "print print_small_structs(...)"] && \ |
| ![gdb_skip_stdio_test "print print_small_structs(...)"] } { |
| send_gdb "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n" |
| gdb_expect_list "print print_small_structs" ".*$gdb_prompt $" { |
| "\[\t\r\n \]+alpha" |
| "\[\t\r\n \]+gamma" |
| "\[\t\r\n \]+epsilon" |
| "\[\t\r\n \]+alpha" |
| "\[\t\r\n \]+gamma" |
| "\[\t\r\n \]+epsilon" |
| "\[\t\r\n \]+ch1: y[ \t]*ch2: n" |
| "\[\t\r\n \]+Contents of three_char_t:" |
| "\[\t\r\n \]+a[ \t]*b[ \t]*c" |
| "\[\t\r\n \]+Contents of five_char_t:" |
| "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p" |
| "\[\t\r\n \]+Contents of int_char_combo_t:" |
| "\[\t\r\n \]+123[ \t]*z" |
| "\[\t\r\n \]+Sum of the 4 struct values and seed :" |
| "\[\t\r\n \]+52" |
| "\[\t\r\n \]+Contents of struct1:" |
| "\[\t\r\n \]+6[ \t]*0" |
| "\[\t\r\n \]+Contents of struct2:" |
| "\[\t\r\n \]+10[ \t]*0" |
| "\[\t\r\n \]+Contents of struct3:" |
| "\[\t\r\n \]+12[ \t]*0" |
| "\[\t\r\n \]+Contents of one_double_t:" |
| "\[\t\r\n \]+10.500000" |
| "\[\t\r\n \]+Contents of one_double_t:" |
| "\[\t\r\n \]+-3.375000" |
| "\[\t\r\n \]+Contents of one_double_t:" |
| "\[\t\r\n \]+675.093750" |
| "\[\t\r\n \]+Contents of two_floats_t:" |
| "\[\t\r\n \]+45.234001[ \t]*43.599998" |
| "\[\t\r\n \]+Contents of two_floats_t:" |
| "\[\t\r\n \]+78.010002[ \t]*122.099998" |
| "\[\t\r\n \]+Contents of two_floats_t:" |
| "\[\t\r\n \]+-1232.344971[ \t]*-199.210007" |
| } |
| } |
| |
| #call compute_with_small_structs(20) |
| send_gdb "print compute_with_small_structs(20)\n" |
| gdb_expect { |
| -re ".*\[0-9\]+ =.*$gdb_prompt $" { |
| pass "print compute_with_small_structs(20)" |
| } |
| -re ".*$gdb_prompt $" { fail "print compute_with_small_structs(20)" } |
| timeout { fail "(timeout) compute_with_small_structs(20)" } |
| } |
| |
| |
| #call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, |
| # 3.14, -5678.12345, -0.11111111, 216.97065) |
| |
| if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \ |
| ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} { |
| send_gdb "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)\n" |
| gdb_expect_list "print print_ten_doubles" ".*$gdb_prompt $" { |
| "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*" |
| "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*" |
| "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*" |
| "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*" |
| "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*" |
| } |
| } |
| |
| #go -until 1286 |
| gdb_test "tbreak 1286" \ |
| "Breakpoint .* file .*call-ar-st.c, line 1286.*" \ |
| "tbreakpoint line 1286" |
| |
| gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1286\[\t\r\n \]+1286.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1286" |
| |
| if { [istarget "hppa*-*-hpux*"] } { |
| # |
| # NOTE:(FIXME) |
| # the aCC demangler cannot demangle the name of a function with >10 args. |
| # so I added a .* after the name of the function, to match the |
| # incredibly long mangled name |
| # (getting aCC's libdemangle.a bundled w/ the system?) |
| # DTS CLLbs16994 coulter 990114 |
| # |
| # FIXME: use step for hppa* testing for now |
| # guo 990621 |
| # |
| send_gdb "step\n" |
| gdb_expect { |
| -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list"} |
| -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" } |
| timeout { fail "step into print_long_arg_list (timeout)" } |
| } |
| } else { |
| |
| # We can't just assume that a "step" will get us into |
| # print_long_arg_list here,either. |
| gdb_test "tbreak print_long_arg_list" \ |
| "Breakpoint .* file .*call-ar-st.c, line .*" \ |
| "tbreak in print_long_arg_list after stepping into memcpy" |
| # The short match case below handles cases where a buffer |
| # overflows or something, and expect can't deal with the full |
| # line. Perhaps a more elegant solution exists... -sts 1999-08-17 |
| send_gdb "continue\n" |
| if {![gdb_skip_float_test "step into print_long_arg_list"]} { |
| gdb_expect { |
| -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { pass "step into print_long_arg_list" } |
| -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list (short match)"} |
| -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" } |
| timeout { fail "step into print_long_arg_list (timeout)" } |
| } |
| } else { |
| # If skipping float tests, don't expect anything in arg list. |
| gdb_expect { |
| -re ".*print_long_arg_list \\(.*\\).*$gdb_prompt $" { pass "step into print_long_arg_list" } |
| -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" } |
| timeout { fail "step into print_long_arg_list (timeout)" } |
| } |
| } |
| } |
| |
| set ws "\[\n\r\t \]+" |
| |
| #call print_small_structs(struct1, struct2, struct3, struct4, flags, |
| # flags_combo, three_char, five_char, int_char_combo, |
| # d1, d2, d3, f1, f2, f3) |
| |
| if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \ |
| ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } { |
| # On Solaris, some of the args are passed by ref, others by value, |
| # and GDB gets confused and says "Invalid cast" because it thinks |
| # it has to cast the structure into a pointer to structure. A real |
| # GDB bug, probably for all Sparc configs, but obscure. -sts 1999-08-17. |
| setup_xfail "sparc*-*-solaris*" |
| send_gdb "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)\n" |
| gdb_expect_list "print print_small_structs from print_long_arg_list" ".*$gdb_prompt $" { |
| "\[\t\r\n \]+alpha" |
| "\[\t\r\n \]+gamma" |
| "\[\t\r\n \]+epsilon" |
| "\[\t\r\n \]+alpha" |
| "\[\t\r\n \]+gamma" |
| "\[\t\r\n \]+epsilon" |
| "\[\t\r\n \]+ch1: y[ \t]*ch2: n" |
| "\[\t\r\n \]+Contents of three_char_t:" |
| "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c" |
| "\[\t\r\n \]+Contents of five_char_t:" |
| "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p" |
| "\[\t\r\n \]+Contents of int_char_combo_t:" |
| "\[\t\r\n \]+123\[ \t\]*z" |
| "\[\t\r\n \]+Sum of the 4 struct values and seed :" |
| "\[\t\r\n \]+52" |
| "\[\t\r\n \]+Contents of struct1:" |
| "\[\t\r\n \]+6\[ \t\]*0" |
| "\[\t\r\n \]+Contents of struct2:" |
| "\[\t\r\n \]+10\[ \t\]*0" |
| "\[\t\r\n \]+Contents of struct3:" |
| "\[\t\r\n \]+12\[ \t\]*0" |
| "\[\t\r\n \]+Contents of one_double_t:" |
| "\[\t\r\n \]+10.500000" |
| "\[\t\r\n \]+Contents of one_double_t:" |
| "\[\t\r\n \]+-3.375000" |
| "\[\t\r\n \]+Contents of one_double_t:" |
| "\[\t\r\n \]+675.093750" |
| "\[\t\r\n \]+Contents of two_floats_t:" |
| "\[\t\r\n \]+45.234001\[ \t\]*43.599998" |
| "\[\t\r\n \]+Contents of two_floats_t:" |
| "\[\t\r\n \]+78.010002\[ \t\]*122.099998" |
| "\[\t\r\n \]+Contents of two_floats_t:" |
| "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007" |
| } |
| } |
| |
| |
| #go -until 1300 |
| gdb_test "tbreak 1300" \ |
| "Breakpoint.* file .*call-ar-st.c, line 1300.*" \ |
| "tbreakpoint line 1300" |
| |
| if ![gdb_skip_stdio_test "continuing to 1300"] { |
| gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \ |
| "continue to 1300" |
| } else { |
| gdb_test "continue" "" "" |
| } |
| |
| #step |
| send_gdb "step\n" |
| gdb_expect { |
| -re " |
| init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:416\[ \t\n\r\]+416.*bit_flags_combo->alpha = a;.*$gdb_prompt $" { |
| pass "step into init_bit_flags_combo"} |
| -re ".*$gdb_prompt $" { fail "step into init_bit_flags_combo" } |
| timeout { fail "step into init_bit_flags_combo (timeout)" } |
| } |
| |
| #call print_bit_flags_combo(*bit_flags_combo) |
| if ![gdb_skip_stdio_test "continuing to 1300"] { |
| send_gdb "print print_bit_flags_combo(*bit_flags_combo)\n" |
| gdb_expect { |
| -re ".*alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*$gdb_prompt $" { |
| pass "print print_bit_flags_combo from init_bit_flags_combo" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "print print_bit_flags_combo from init_bit_flags_combo" |
| } |
| timeout { |
| fail "(timeout) print_bit_flags_combo from init_bit_flags_combo" |
| } |
| } |
| } |
| |
| |
| #go -until 1305 |
| gdb_test "tbreak 1305" \ |
| "Breakpoint.* file .*call-ar-st.c, line 1305.*" \ |
| "tbreakpoint line 1305" |
| |
| gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1305\[\r\n\t \]+1305.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \ |
| "continue to 1305" |
| |
| #call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3) |
| |
| # FIXME: |
| # HP aCC demangler currently does not handle hp aCC functions with >10 args |
| # DTS CLLbs16994 coulter 990114 |
| |
| if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994} |
| |
| if {![gdb_skip_float_test "print print_long_arg_list"] && \ |
| ![gdb_skip_stdio_test "print print_long_arg_list"] } { |
| send_gdb "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n" |
| gdb_expect_list "print print_long_arg_list" ".*$gdb_prompt $" { |
| "\[ \n\r\t\]+double : 22.250000" |
| "\[ \n\r\t\]+double : 33.375000" |
| "\[ \n\r\t\]+int : 0" |
| "\[ \n\r\t\]+int : -25" |
| "\[ \n\r\t\]+int : 100" |
| "\[ \n\r\t\]+int : 2345" |
| "\[ \n\r\t\]+alpha" |
| "\[ \n\r\t\]+gamma" |
| "\[ \n\r\t\]+epsilon" |
| "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n" |
| "\[ \n\r\t\]+Contents of three_char_t:" |
| "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z" |
| "\[ \n\r\t\]+Contents of five_char_t:" |
| "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o" |
| "\[ \n\r\t\]+Contents of int_char_combo_t:" |
| "\[ \n\r\t\]+123\[ \t\]+z" |
| "\[ \n\r\t\]+Sum of the 4 struct values and seed :" |
| "\[ \n\r\t\]+52" |
| "\[ \n\r\t\]+Contents of struct1:" |
| "\[ \n\r\t\]+6\[ \t\]+0" |
| "\[ \n\r\t\]+Contents of struct2:" |
| "\[ \n\r\t\]+10\[ \t\]+0" |
| "\[ \n\r\t\]+Contents of struct3:" |
| "\[ \n\r\t\]+12\[ \t\]+0" |
| "\[ \n\r\t\]+Contents of one_double_t:" |
| "\[ \n\r\t\]+1.111110" |
| "\[ \n\r\t\]+Contents of one_double_t:" |
| "\[ \n\r\t\]+-345.340000" |
| "\[ \n\r\t\]+Contents of one_double_t:" |
| "\[ \n\r\t\]+546464.200000" |
| "\[ \n\r\t\]+Contents of two_floats_t:" |
| "\[ \n\r\t\]+0.234000\[ \t\]+453.100006" |
| "\[ \n\r\t\]+Contents of two_floats_t:" |
| "\[ \n\r\t\]+78.345001\[ \t\]+23.090000" |
| "\[ \n\r\t\]+Contents of two_floats_t:" |
| "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000" |
| } |
| } |
| |
| |
| #go -until 1311 |
| gdb_test "tbreak 1311" \ |
| "Breakpoint.* file .*call-ar-st.c, line 1311.*" \ |
| "tbreakpoint line 1311" |
| |
| gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1311\[ \t\n\r\]+1311.*compute_with_small_structs\\(35\\);" \ |
| "continue to 1311" |
| |
| |
| #call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4) |
| if ![gdb_skip_stdio_test "print sum_struct_print(...)"] { |
| send_gdb "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)\n" |
| gdb_expect { |
| -re ".*Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*$gdb_prompt $" { |
| pass "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" |
| } |
| timeout { |
| fail "(timeout) sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" |
| } |
| } |
| } |
| |
| |
| #call print_struct_rep(*struct1, *struct2, *struct3) |
| if ![gdb_skip_stdio_test "print print_struct_rep(...)"] { |
| send_gdb "print print_struct_rep(*struct1, *struct2, *struct3)\n" |
| gdb_expect_list "print print_struct_rep(*struct1, *struct2, *struct3)" \ |
| ".*$gdb_prompt $" { |
| "\[ \t\n\r\]+Contents of struct1:" |
| "\[ \t\n\r\]+ 22 0" |
| "\[ \t\n\r\]+Contents of struct2:" |
| "\[ \t\n\r\]+ 42 0" |
| "\[ \t\n\r\]+Contents of struct3:" |
| "\[ \t\n\r\]+ 62 0" |
| } |
| } |
| |
| if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] { |
| send_gdb "print print_one_large_struct(*list1)\n" |
| gdb_expect { |
| -re ".* 4 1.*$gdb_prompt $" { |
| pass "print print_one_large_struct(*list1)" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "print print_one_large_struct(*list1)" |
| } |
| timeout { |
| fail "(timeout) print_one_large_struct(*list1)" |
| } |
| } |
| } |
| |
| set timeout $oldtimeout |
| return |
| |
