| # Copyright 1998, 1999, 2002, 2003 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| # This file was written by Elena Zannoni (ezannoni@cygnus.com) |
| |
| # This file is part of the gdb testsuite. |
| |
| # |
| # tests for command completion |
| # |
| # Here are some useful test cases for completion. |
| # They should be tested with both M-? and TAB. |
| # |
| # "show output-" "radix" |
| # "show output" "-radix" |
| # "p" ambiguous (commands starting with p--path, print, printf, etc.) |
| # "p " ambiguous (all symbols) |
| # "info t foo" no completions |
| # "info t " no completions |
| # "info t" ambiguous ("info target", "info terminal", etc.) |
| # "info ajksdlfk" no completions |
| # "info ajksdlfk " no completions |
| # "info" " " |
| # "info " ambiguous (all info commands) |
| # "p \"break" unambiguous (completes to filename "break.c") |
| # "p \"break." unambiguous (should complete to "break.c" but does not, |
| # due to readline limitations) |
| # "p 'a" ambiguous (all symbols starting with a) |
| # "p b-a" ambiguous (all symbols starting with a) |
| # "p b-" ambiguous (all symbols) |
| # "file Make" "file" (word break hard to screw up here) |
| # "file ../gdb.stabs/we" "ird" (needs to not break word at slash) |
| # |
| |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| |
| global usestubs |
| |
| # |
| # test running programs |
| # |
| set prms_id 0 |
| set bug_id 0 |
| |
| set testfile "break" |
| set srcfile ${testfile}.c |
| set binfile ${objdir}/${subdir}/${testfile} |
| if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } { |
| gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." |
| } |
| |
| if [get_compiler_info ${binfile}] { |
| return -1; |
| } |
| |
| gdb_exit |
| |
| # Don't let a .inputrc file or an existing setting of INPUTRC mess up |
| # the test results. Even if /dev/null doesn't exist on the particular |
| # platform, the readline library will use the default setting just by |
| # failing to open the file. OTOH, opening /dev/null successfully will |
| # also result in the default settings being used since nothing will be |
| # read from this file. |
| global env |
| if [info exists env(INPUTRC)] { |
| set old_inputrc $env(INPUTRC) |
| } |
| set env(INPUTRC) "/dev/null" |
| |
| gdb_start |
| gdb_reinitialize_dir $srcdir/$subdir |
| gdb_load ${binfile} |
| |
| if ![runto_main] then { |
| perror "tests suppressed" |
| } |
| |
| set oldtimeout1 $timeout |
| set timeout 30 |
| |
| |
| send_gdb "hfgfh\t" |
| sleep 1 |
| gdb_expect { |
| -re "^hfgfh\\\x07$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Undefined command: \"hfgfh\"\\. Try \"help\"\\..*$gdb_prompt $"\ |
| { pass "complete 'hfgfh'"} |
| -re ".*$gdb_prompt $" { fail "complete 'hfgfh'"} |
| timeout {fail "(timeout) complete 'hfgfh'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'hfgfh'" } |
| timeout { fail "(timeout) complete 'hfgfh'" } |
| } |
| |
| #exp_internal 0 |
| |
| send_gdb "show output\t" |
| sleep 1 |
| gdb_expect { |
| -re "^show output-radix $"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Default output radix for printing of values is 10\\..*$gdb_prompt $"\ |
| { pass "complete 'show output'"} |
| -re ".*$gdb_prompt $" { fail "complete 'show output'"} |
| timeout {fail "(timeout) complete 'show output'"} |
| } |
| } |
| -re "^show output$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Default output radix for printing of values is 10\\..*$gdb_prompt $"\ |
| { fail "complete 'show output'"} |
| -re ".*$gdb_prompt $" { fail "complete 'show output'"} |
| timeout { fail "(timeout) complete 'show output'"} |
| } |
| |
| } |
| |
| -re ".*$gdb_prompt $" { fail "complete 'show output'" } |
| timeout { fail "(timeout) complete 'show output'" } |
| } |
| |
| |
| send_gdb "show output-\t" |
| sleep 1 |
| gdb_expect { |
| -re "^show output-radix $"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Default output radix for printing of values is 10\\..*$gdb_prompt $"\ |
| { pass "complete 'show output-'"} |
| -re ".*$gdb_prompt $" { fail "complete 'show output-'"} |
| timeout {fail "(timeout) complete 'show output-'"} |
| } |
| } |
| -re "^show output-$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Default output radix for printing of values is 10\\..*$gdb_prompt $"\ |
| { fail "complete 'show output-'"} |
| -re ".*$gdb_prompt $" { fail "complete 'show output-'"} |
| timeout { fail "(timeout) complete 'show output-'"} |
| } |
| |
| } |
| |
| -re ".*$gdb_prompt $" { fail "complete 'show output-'" } |
| timeout { fail "(timeout) complete 'show output-'" } |
| } |
| |
| send_gdb "p\t" |
| sleep 1 |
| gdb_expect { |
| -re "^p\\\x07$"\ |
| { send_gdb "\n" |
| sleep 1 |
| gdb_expect { |
| -re "The history is empty\\..*$gdb_prompt $"\ |
| { pass "complete 'p'"} |
| -re ".*$gdb_prompt $" { fail "complete 'p'"} |
| timeout {fail "(timeout) complete 'p' 2"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'p'" } |
| timeout { fail "(timeout) complete 'p' 1" } |
| } |
| |
| send_gdb "p \t" |
| sleep 3 |
| gdb_expect { |
| -re "^p \\\x07$"\ |
| { send_gdb "\n" |
| sleep 1 |
| gdb_expect { |
| -re "The history is empty\\..*$gdb_prompt $"\ |
| { pass "complete 'p '"} |
| -re ".*$gdb_prompt $" { fail "complete 'p '"} |
| timeout {fail "(timeout) complete 'p ' 1"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'p '" } |
| timeout { fail "(timeout) complete 'p ' 2" } |
| } |
| |
| |
| send_gdb "info t foo\t" |
| sleep 1 |
| gdb_expect { |
| -re "^info t foo\\\x07$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Ambiguous info command \"t foo\": target, terminal, threads, tp, tracepoints, types\\..*$gdb_prompt $"\ |
| { pass "complete 'info t foo'"} |
| -re ".*$gdb_prompt $" { fail "complete 'info t foo'"} |
| timeout {fail "(timeout) complete 'info t foo'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'info t foo'" } |
| timeout { fail "(timeout) complete 'info t foo'" } |
| } |
| |
| send_gdb "info t\t" |
| sleep 1 |
| gdb_expect { |
| -re "^info t\\\x07$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Ambiguous info command \"t\": target, terminal, threads, tp, tracepoints, types\\.. |
| *$gdb_prompt $"\ |
| { pass "complete 'info t'"} |
| -re ".*$gdb_prompt $" { fail "complete 'info t'"} |
| timeout {fail "(timeout) complete 'info t'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'info t'" } |
| timeout { fail "(timeout) complete 'info t'" } |
| } |
| |
| |
| send_gdb "info t \t" |
| sleep 1 |
| gdb_expect { |
| -re "^info t \\\x07$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Ambiguous info command \"t \": target, terminal, threads, tp, tracepoints, types\\.. |
| *$gdb_prompt $"\ |
| { pass "complete 'info t '"} |
| -re ".*$gdb_prompt $" { fail "complete 'info t '"} |
| timeout {fail "(timeout) complete 'info t '"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'info t '" } |
| timeout { fail "(timeout) complete 'info t '" } |
| } |
| |
| |
| send_gdb "info asdfgh\t" |
| sleep 1 |
| gdb_expect { |
| -re "^info asdfgh\\\x07$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Undefined info command: \"asdfgh\". Try \"help info\"\\.. |
| *$gdb_prompt $"\ |
| { pass "complete 'info asdfgh'"} |
| -re ".*$gdb_prompt $" { fail "complete 'info asdfgh'"} |
| timeout {fail "(timeout) complete 'info asdfgh'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'info asdfgh'" } |
| timeout { fail "(timeout) complete 'info asdfgh'" } |
| } |
| |
| |
| send_gdb "info asdfgh \t" |
| sleep 1 |
| gdb_expect { |
| -re "^info asdfgh \\\x07$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Undefined info command: \"asdfgh \". Try \"help info\"\\.. |
| *$gdb_prompt $"\ |
| { pass "complete 'info asdfgh '"} |
| -re ".*$gdb_prompt $" { fail "complete 'info asdfgh '"} |
| timeout {fail "(timeout) complete 'info asdfgh '"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'info asdfgh '" } |
| timeout { fail "(timeout) complete 'info asdfgh '" } |
| } |
| |
| send_gdb "info\t" |
| sleep 1 |
| gdb_expect { |
| -re "^info $"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "\"info\" must be followed by the name of an info command\\.\r\nList of info subcommands:\r\n\r\n.*info address.*info watchpoints.*\r\n\r\nType \"help info\" followed by info subcommand name for full documentation.\r\nCommand name abbreviations are allowed if unambiguous\\..*$gdb_prompt $"\ |
| { pass "complete 'info'"} |
| -re ".*$gdb_prompt $" { fail "complete 'info'"} |
| timeout {fail "(timeout) complete 'info'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'info'" } |
| timeout { fail "(timeout) complete 'info'" } |
| } |
| |
| send_gdb "info \t" |
| sleep 1 |
| gdb_expect { |
| -re "^info \\\x07$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "\"info\" must be followed by the name of an info command\\.\r\nList of info subcommands:\r\n\r\n.*info address.*Type \"help info\" followed by info subcommand name for full documentation.\r\nCommand name abbreviations are allowed if unambiguous\\..*$gdb_prompt $"\ |
| { pass "complete 'info '"} |
| -re ".*$gdb_prompt $" { fail "complete 'info '"} |
| timeout {fail "(timeout) complete 'info '"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'info '" } |
| timeout { fail "(timeout) complete 'info '" } |
| } |
| |
| |
| send_gdb "info \t" |
| sleep 1 |
| gdb_expect { |
| -re "^info \\\x07$"\ |
| { send_gdb "\t" |
| gdb_expect { |
| -re "address.*types.*$gdb_prompt info $"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "\"info\".*unambiguous\\..*$gdb_prompt $"\ |
| { pass "complete (2) 'info '"} |
| -re ".*$gdb_prompt $" { fail "complete (2) 'info '"} |
| timeout {fail "(timeout) complete (2) 'info '"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete (2) 'info '"} |
| timeout {fail "(timeout) complete (2) 'info '"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete (2) 'info '" } |
| timeout { fail "(timeout) complete (2) 'info '" } |
| } |
| |
| |
| send_gdb "p \"break\t" |
| sleep 1 |
| gdb_expect { |
| -re "^p \"break\\\x07$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" { fail "complete 'p \"break'"} |
| timeout {fail "(timeout) complete 'p \"break'"} |
| } |
| } |
| -re "^p \"break\\.c\"$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" { pass "complete 'p \"break'"} |
| timeout {fail "(timeout) complete 'p \"break'"} |
| } |
| } |
| -re "^p \"break.*$" |
| { send_gdb "\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" { fail "complete 'p \"break'"} |
| timeout {fail "(timeout) complete 'p \"break'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'p \"break'" } |
| timeout { fail "(timeout) complete 'p \"break'" } |
| } |
| |
| setup_xfail "*-*-*" |
| send_gdb "p \"break.\t" |
| sleep 1 |
| gdb_expect { |
| -re "^p \"break\\.\\\x07$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" { fail "complete 'p \"break.'"} |
| timeout {fail "(timeout) complete 'p \"break.'"} |
| } |
| } |
| -re "^p \"break\\.c\"$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" { pass "complete 'p \"break.'"} |
| timeout {fail "(timeout) complete 'p \"break.'"} |
| } |
| } |
| -re "^p \"break\\..*$" |
| { send_gdb "\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" { fail "complete 'p \"break.'"} |
| timeout {fail "(timeout) complete 'p \"break.'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'p \"break.'" } |
| timeout { fail "(timeout) complete 'p \"break.'" } |
| } |
| |
| send_gdb "p 'a\t" |
| sleep 1 |
| gdb_expect { |
| -re "^p 'a\\\x07$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "(Invalid character constant\\.|Unmatched single quote\\.).*$gdb_prompt $"\ |
| { pass "complete 'p \'a'"} |
| -re ".*$gdb_prompt $" { fail "complete 'p \'a'"} |
| timeout {fail "(timeout) complete 'p \'a'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'p \'a'" } |
| timeout { fail "(timeout) complete 'p \'a'" } |
| } |
| |
| send_gdb "p 'a\t" |
| sleep 1 |
| gdb_expect { |
| -re "^p 'a\\\x07$" { |
| send_gdb "\t" |
| gdb_expect { |
| -re ".*argv.*$gdb_prompt p .a$" { |
| send_gdb "\n" |
| gdb_expect { |
| -re "(Invalid character constant\\.|Unmatched single quote\\.).*$gdb_prompt $" { |
| pass "complete (2) 'p \'a'" |
| } |
| -re ".*$gdb_prompt $" { fail "complete (2) 'p \'a'" } |
| timeout { fail "(timeout) complete (2) 'p \'a'" } |
| } |
| } |
| -re "(There are $decimal possibilities\\. Do you really\r\nwish to see them all.|Display all $decimal possibilities.) \\(y or n\\)$" { |
| send_gdb "n" |
| gdb_expect { |
| -re "\\(gdb\\) p 'a$" { |
| send_gdb "\n" |
| gdb_expect { |
| -re "(Invalid character constant\\.|Unmatched single quote\\.).*$gdb_prompt $" { |
| pass "complete (2) 'p \'a'" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "complete (2) 'p \'a'" |
| } |
| timeout { fail "(timeout) complete (2) 'p \'a'" } |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete (2) 'p \'a'" } |
| timeout { fail "(timeout) complete (2) 'p \'a'" } |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete (2) 'p \'a'" } |
| timeout { fail "(timeout) complete (2) 'p \'a'" } |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete (2) 'p \'a'" } |
| timeout { fail "(timeout) complete (2) 'p \'a'" } |
| } |
| |
| |
| # These tests used to try completing the shorter "p b-a". |
| # Unfortunately, on some systems, there are .o files in system |
| # libraries which declare static variables named `b'. Of course, |
| # those variables aren't really in scope, as far as the compiler is |
| # concerned. But GDB deliberately tries to be more liberal: if you |
| # enter an identifier that doesn't have any binding in scope, GDB will |
| # search all the program's compilation units for a static variable of |
| # the given name. |
| # |
| # This behavior can help avoid a lot of pedantry, so it's usually a |
| # good thing. But in this test case, it causes GDB to print the value |
| # of some random variable, instead of giving us the "No symbol..." |
| # error we were expecting. |
| # |
| # For example, on S/390 linux, the file s_atan.c in libm.a declares a |
| # `b', which is a structure containing an int and a float, so GDB says |
| # ``Argument to arithmetic operation not a number or boolean'' instead |
| # of ``No symbol ...''. |
| # |
| # So, I'm hoping that there is no system with a static library variable named |
| # `no_var_by_this_name'. |
| send_gdb "p no_var_named_this-a\t" |
| sleep 1 |
| gdb_expect { |
| -re "^p no_var_named_this-a\\\x07$" { |
| send_gdb "\n" |
| gdb_expect { |
| -re "No symbol \"no_var_named_this\" in current context\\..*$gdb_prompt $" { |
| pass "complete 'p no_var_named_this-a'" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "complete 'p no_var_named_this-a'" |
| } |
| timeout { |
| fail "(timeout) complete 'p no_var_named_this-a'" |
| } |
| } |
| } |
| -re ".*$gdb_prompt $" { |
| fail "complete 'p no_var_named_this-a'" |
| } |
| timeout { |
| fail "(timeout) complete 'p no_var_named_this-a'" |
| } |
| } |
| |
| send_gdb "p no_var_named_this-a\t" |
| sleep 1 |
| gdb_expect { |
| -re "^p no_var_named_this-a\\\x07$" { |
| send_gdb "\t" |
| gdb_expect { |
| -re ".*argv.*$gdb_prompt p no_var_named_this-a$" { |
| send_gdb "\n" |
| gdb_expect { |
| -re "No symbol \"no_var_named_this\" in current context\\..*$gdb_prompt $" { |
| pass "complete (2) 'p no_var_named_this-a'" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "complete (2) 'p no_var_named_this-a'" |
| } |
| timeout { |
| fail "(timeout) complete (2) 'p no_var_named_this-a'" |
| } |
| } |
| } |
| -re "(There are $decimal possibilities\\. Do you really\r\nwish to see them all.|Display all $decimal possibilities.) \\(y or n\\)$" { |
| send_gdb "n" |
| gdb_expect { |
| -re "\\(gdb\\) p no_var_named_this-a$" { |
| send_gdb "\n" |
| gdb_expect { |
| -re "No symbol \"no_var_named_this\" in current context\\..*$gdb_prompt $" { |
| pass "complete (2) 'p no_var_named_this-a'" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "complete (2) 'p no_var_named_this-a'" |
| } |
| timeout { |
| fail "(timeout) complete (2) 'p no_var_named_this-a'" |
| } |
| } |
| } |
| -re ".*$gdb_prompt $" { |
| fail "complete (2) 'p no_var_named_this-a'" |
| } |
| timeout { |
| fail "(timeout) complete (2) 'p no_var_named_this-a'" |
| } |
| } |
| } |
| -re ".*$gdb_prompt $" { |
| fail "complete (2) 'p no_var_named_this-a'" |
| } |
| timeout { fail "(timeout) complete (2) 'p no_var_named_this-a'" } |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete (2) 'p no_var_named_this-a'" } |
| timeout { fail "(timeout) complete (2) 'p no_var_named_this-a'" } |
| } |
| |
| send_gdb "p no_var_named_this-\t" |
| sleep 1 |
| gdb_expect { |
| -re "^p no_var_named_this-\\\x07$" { |
| send_gdb "\t" |
| gdb_expect { |
| -re "(There are $decimal possibilities\\. Do you really\r\nwish to see them all.|Display all $decimal possibilities.) \\(y or n\\)$" { |
| send_gdb "n" |
| gdb_expect { |
| -re "\\(gdb\\) p no_var_named_this-$" { |
| send_gdb "\n" |
| gdb_expect { |
| -re "No symbol \"no_var_named_this\" in current context\\..*$gdb_prompt $" { |
| pass "complete (2) 'p no_var_named_this-'" |
| } |
| -re ".*$gdb_prompt $" { |
| fail "complete (2) 'p no_var_named_this-'" |
| } |
| timeout { |
| fail "(timeout) complete (2) 'p no_var_named_this-'" |
| } |
| } |
| } |
| -re ".*$gdb_prompt $" { |
| fail "complete (2) 'p no_var_named_this-'" |
| } |
| timeout { |
| fail "(timeout) complete (2) 'p no_var_named_this-'" |
| } |
| } |
| } |
| -re ".*$gdb_prompt $" { |
| fail "complete (2) 'p no_var_named_this-'" |
| } |
| timeout { fail "(timeout) complete (2) 'p no_var_named_this-'" } |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete (2) 'p no_var_named_this-'" } |
| timeout { fail "(timeout) complete (2) 'p no_var_named_this-'" } |
| } |
| |
| |
| # The following tests used to simply try to complete `${objdir}/Make', |
| # and so on. The problem is that ${objdir} can be very long; the |
| # completed filename may be more than eighty characters wide. When |
| # this happens, readline tries to manage things, producing output that |
| # may make sense on the screen, but is rather hard for our script to |
| # recognize. |
| # |
| # In the case that motivated this change, the (gdb) prompt occupied |
| # the leftmost six columns, and `${objdump}/' was seventy-four |
| # characters long --- eighty in all. After printing the slash, |
| # readline emitted a space, a carriage return, and then `Makefile' |
| # (the tab character being received as input after `Make'. |
| # |
| # Basically, you have to let readline do whatever it's going to do to |
| # make the screen look right. If it happens to use a different |
| # strategy on Tuesdays to get the cursor in the right place, that's |
| # not something the testsuite should care about. |
| # |
| # So, we avoid long lines. We `cd' to ${objdir} first, and then do |
| # the completion relative to the current directory. |
| # |
| # Note that if we are building in the source tree, then there will be |
| # more than one completion for ./Make, so we need to handle that also. |
| # A better long term solution might be to create a temporary directory, |
| # populate it with a set of known names, and use that directory to |
| # test completions. |
| |
| gdb_test "cd ${objdir}" "Working directory ${objdir}.*" "cd to \${objdir}" |
| send_gdb "file ./Make\t" |
| sleep 1 |
| gdb_expect { |
| -re "^file ./Make(\\\x07|)file.*$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "\r\nA program is being debugged already\\. Kill it\\? \\(y or n\\) $"\ |
| { send_gdb "n\n" |
| gdb_expect { |
| -re "\r\nProgram not killed\\.\r\n$gdb_prompt $"\ |
| { pass "complete 'file ./Make'"} |
| -re ".*$gdb_prompt $" { fail "complete 'file ./Make'"} |
| timeout {fail "(timeout) complete 'file ./Make'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'file ./Make'"} |
| timeout {fail "(timeout) complete 'file ./Make'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'file ./Make'" } |
| timeout { fail "(timeout) complete 'file ./Make'" } |
| } |
| |
| # ${srcdir} may be a relative path. We want to make sure we end up |
| # in the right directory - so make sure we know where it is. |
| set mydir [pwd] |
| cd ${srcdir} |
| set fullsrcdir [pwd] |
| cd ${mydir} |
| |
| # If the directory name contains a '+' we must escape it, adding a backslash. |
| # If not, the test below will fail because it will interpret the '+' as a |
| # regexp operator. We use string_to_regexp for this purpose. |
| |
| gdb_test "cd ${fullsrcdir}" \ |
| "Working directory [string_to_regexp ${fullsrcdir}].*" \ |
| "cd to \${srcdir}" |
| |
| send_gdb "file ./gdb.base/compl\t" |
| sleep 1 |
| gdb_expect { |
| -re "^file ./gdb.base/completion\\.exp $"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "\r\nA program is being debugged already\\. Kill it\\? \\(y or n\\) $" |
| \ |
| { send_gdb "n\n" |
| gdb_expect { |
| -re "\r\nProgram not killed\\.\r\n$gdb_prompt $"\ |
| { pass "complete 'file ./gdb.base/compl'"} |
| -re ".*$gdb_prompt $" { fail "complete 'file ./gdb.base/compl'"} |
| timeout {fail "(timeout) complete 'file ./gdb.base/compl'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'file ./gdb.base/compl'"} |
| timeout {fail "(timeout) complete 'file ./gdb.base/compl'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'file ./gdb.base/compl'" } |
| timeout { fail "(timeout) complete 'file ./gdb.base/compl'" } |
| } |
| |
| send_gdb "info func marke\t" |
| sleep 1 |
| gdb_expect { |
| -re "^info func marke.*r$"\ |
| { |
| send_gdb "\t\t" |
| sleep 3 |
| gdb_expect { |
| -re "marker1.*$gdb_prompt info func marker$"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "All functions matching regular expression \"marker\":.*File.*break.c:\r\nint marker1\\((void|)\\);\r\nint marker2\\(int\\).*marker3\\(char.*char.*\\).*marker4\\(long int\\);.*$gdb_prompt $"\ |
| { pass "complete 'info func marke'"} |
| -re ".*$gdb_prompt $" { fail "complete 'info func marke'"} |
| timeout {fail "(timeout) complete 'info func marke'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'info func marke'"} |
| timeout {fail "(timeout) complete 'info func marke'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'info func marke'" } |
| timeout { fail "(timeout) complete 'info func marke'" } |
| } |
| |
| |
| send_gdb "set follow-fork-mode \t\t" |
| sleep 1 |
| gdb_expect { |
| -re "ask.*child.*parent.*$gdb_prompt set follow-fork-mode $"\ |
| { send_gdb "\n" |
| gdb_expect { |
| -re "Requires an argument.*ask.*child.*parent.*$gdb_prompt $"\ |
| { pass "complete 'set follow-fork-mode'"} |
| -re "Ambiguous item \"\"\\..*$gdb_prompt $"\ |
| { pass "complete 'set follow-fork-mode'"} |
| -re ".*$gdb_prompt $" { fail "complete 'set follow-fork-mode'"} |
| timeout {fail "(timeout) complete 'set follow-fork-mode'"} |
| } |
| } |
| -re ".*$gdb_prompt $" { fail "complete 'set follow-fork-mode'" } |
| timeout { fail "(timeout) complete 'set follow-fork-mode'" } |
| } |
| |
| # Restore globals modified in this test... |
| if [info exists old_inputrc] { |
| set env(INPUTRC) $old_inputrc |
| } else { |
| unset env(INPUTRC) |
| } |
| set timeout $oldtimeout1 |
| |
| return 0 |
