| # Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2002, 2003 |
| # Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| # This file was written by Fred Fish. (fnf@cygnus.com) |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| set prms_id 0 |
| set bug_id 0 |
| |
| set testfile "list" |
| set binfile ${objdir}/${subdir}/${testfile} |
| |
| # Need to download the header to the host. |
| remote_download host ${srcdir}/${subdir}/list0.h list0.h |
| |
| |
| if { [gdb_compile "${srcdir}/${subdir}/list0.c" "${binfile}0.o" object {debug}] != "" } { |
| gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." |
| } |
| |
| if { [gdb_compile "${srcdir}/${subdir}/list1.c" "${binfile}1.o" object {debug}] != "" } { |
| gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." |
| } |
| |
| if { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } { |
| gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." |
| } |
| |
| |
| |
| # Create and source the file that provides information about the compiler |
| # used to compile the test case. |
| if [get_compiler_info ${binfile}] { |
| return -1; |
| } |
| |
| # |
| # Local utility proc just to set and verify listsize |
| # Return 1 if success, 0 if fail. |
| # |
| |
| set set_listsize_count 0; |
| |
| proc set_listsize { arg } { |
| global gdb_prompt |
| global set_listsize_count; |
| |
| incr set_listsize_count; |
| if [gdb_test "set listsize $arg" "" "setting listsize to $arg #$set_listsize_count"] { |
| return 0; |
| } |
| if { $arg <= 0 } { |
| set arg "unlimited"; |
| } |
| |
| if [gdb_test "show listsize" "Number of source lines.* is ${arg}.*" "show listsize $arg #$set_listsize_count"] { |
| return 0; |
| } |
| return 1 |
| } |
| |
| # |
| # Test display of listsize lines around a given line number. |
| # |
| |
| proc test_listsize {} { |
| global gdb_prompt |
| global hp_cc_compiler |
| global hp_aCC_compiler |
| |
| # Show default size |
| |
| gdb_test "show listsize" "Number of source lines gdb will list by default is 10.*" "show default list size" |
| |
| # Show the default lines |
| # Note that remote targets that have debugging info for _start available will |
| # list the lines there instead of main, so we skip this test for remote targets. |
| # The second case is for optimized code, it is still correct. |
| |
| if [is_remote target] { |
| runto_main; |
| unsupported "list default lines around main"; |
| } else { |
| gdb_test "list" "(1\[ \t\]+#include \"list0.h\".*10\[ \t\]+x = 0;|2.*11\[ \t\]+foo .x\[+)\]+;)" "list default lines around main" |
| } |
| |
| # Ensure we can limit printouts to one line |
| |
| if [set_listsize 1] { |
| gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"" "list line 1 with listsize 1" |
| gdb_test "list 2" "2\[ \t\]+" "list line 2 with listsize 1" |
| } |
| |
| # Try just two lines |
| |
| if [ set_listsize 2 ] { |
| gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 1 with listsize 2" |
| gdb_test "list 2" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 2 with listsize 2" |
| gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+" "list line 3 with listsize 2" |
| } |
| |
| # Try small listsize > 1 that is an odd number |
| |
| if [ set_listsize 3 ] { |
| gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+int main \[)(\]+" "list line 1 with listsize 3" |
| gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+int main \[)(\]+" "list line 2 with listsize 3" |
| gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+int main \[(\]+\[)\]+\r\n4\[ \t\]+\{" "list line 3 with listsize 3" |
| } |
| |
| # Try small listsize > 2 that is an even number. |
| |
| if [ set_listsize 4 ] then { |
| gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 1 with listsize 4" |
| gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 2 with listsize 4" |
| |
| gdb_test "list 3" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 3 with listsize 4" |
| gdb_test "list 4" "2\[ \t\]+\r\n.*5\[ \t\]+int x;.*" "list line 4 with listsize 4" |
| } |
| |
| # Try a size larger than the entire file. |
| |
| if [ set_listsize 100 ] then { |
| gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*\r\n4\[23\]\[ \t\]+\}" "list line 1 with listsize 100" |
| |
| gdb_test "list 10" "1\[ \t\]+#include \"list0.h\".*\r\n4\[23\]\[ \t\]+\}" "list line 10 with listsize 100" |
| } |
| |
| # Try listsize of 0 which suppresses printing. |
| |
| set_listsize 0 |
| gdb_test "list 1" "" "listsize of 0 suppresses output" |
| |
| # Try listsize of -1 which is special, and means unlimited. |
| |
| set_listsize -1 |
| setup_xfail "*-*-*" |
| gdb_test "list 1" "1\[ \t\]+#include .*\r\n39\[ \t\]+\}" "list line 1 with unlimited listsize" |
| } |
| |
| # |
| # Test "list filename:number" for C include file |
| # |
| |
| proc test_list_include_file {} { |
| global gdb_prompt |
| |
| setup_xfail_format "COFF" |
| gdb_test "list list0.h:1" "1\[ \t\]+/\[*\]+ An include file .*10\[ \t\]+bar \\(x\\+\\+\\);" "list line 1 in include file" |
| |
| setup_xfail_format "COFF" |
| gdb_test "list list0.h:100" "Line number 95 out of range; .*list0.h has 3\[67\] lines." "list message for lines past EOF" |
| } |
| |
| # |
| # Test "list filename:number" for C source file |
| # |
| |
| proc test_list_filename_and_number {} { |
| global gdb_prompt |
| |
| set testcnt 0 |
| |
| send_gdb "list list0.c:1\n" |
| gdb_expect { |
| -re "1\[ \t\]+#include \"list0.h\".*10\[ \t]+x = 0;\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re ".*$gdb_prompt $" { fail "list list0.c:1" ; gdb_suppress_tests } |
| timeout { fail "list list0.c:1 (timeout)" ; gdb_suppress_tests } |
| } |
| send_gdb "list list0.c:10\n" |
| gdb_expect { |
| -re "5\[ \t\]+int x;.*14\[ \t\]+foo .x\[+)\]+;\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re ".*$gdb_prompt $" { fail "list list.c:10" ; gdb_suppress_tests } |
| timeout { fail "list list.c:10 (timeout)" ; gdb_suppress_tests } |
| } |
| send_gdb "list list1.c:1\n" |
| gdb_expect { |
| -re "1\[ \t\]+\#include.*4\[ \t\]+.*int oof\[ \t\]*\(.*\);\r\n.*$gdb_prompt $" { |
| incr testcnt |
| } |
| -re ".*$gdb_prompt $" { fail "list list1.c:1" ; gdb_suppress_tests } |
| timeout { fail "list list1.c:1 (timeout)" ; gdb_suppress_tests } |
| } |
| send_gdb "list list1.c:12\n" |
| gdb_expect { |
| -re "12\[ \t\]+long_line \[(\]+.*\[)\]+;.*13\[ \t\]+\}\r\n.*$gdb_prompt $" { |
| incr testcnt |
| } |
| -re ".*$gdb_prompt $" { fail "list list1.c:12" ; gdb_suppress_tests } |
| timeout { fail "list list1.c:12 (timeout)" ; gdb_suppress_tests } |
| } |
| pass "list filename:number ($testcnt tests)" |
| gdb_stop_suppressing_tests; |
| } |
| |
| # |
| # Test "list function" for C source file |
| # |
| |
| proc test_list_function {} { |
| global gdb_prompt |
| global gcc_compiled |
| |
| # gcc appears to generate incorrect debugging information for code |
| # in include files, which breaks this test. |
| # SunPRO cc is the second case below, it's also correct. |
| gdb_test "list main" "(5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;|1\[ \t\]+#include .*10\[ \t\]+x = 0;)" "list function in source file 1" |
| |
| # Ultrix gdb takes the second case below; it's also correct. |
| # SunPRO cc is the third case. |
| gdb_test "list bar" "(4\[ \t\]+void.*\[ \t\]*long_line.*;.*bar.*9\[ \t\]*.*|1\[ \t\]+void.*8\[ \t\]+\}|1\[ \t\]+void.*7\[ \t\]*long_line ..;|7\[ \t\]+void.*14\[ \t\]+\})" "list function in source file 2" |
| |
| # Test "list function" for C include file |
| # Ultrix gdb is the second case, still correct. |
| # SunPRO cc is the third case. |
| setup_xfail "powerpc-*-*" |
| gdb_test "list foo" "(3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;|2\[ \t\]+including file.*11\[ \t\]+bar \[(\]+.*\[)\]+;|1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;)" "list function in include file" |
| } |
| |
| proc test_list_forward {} { |
| global gdb_prompt |
| |
| set testcnt 0 |
| |
| send_gdb "list list0.c:10\n" |
| gdb_expect { |
| -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests } |
| timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| send_gdb "list\n" |
| gdb_expect { |
| -re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests } |
| timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| send_gdb "list\n" |
| gdb_expect { |
| -re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests } |
| timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| send_gdb "list\n" |
| gdb_expect { |
| -re "35\[ \t\]+foo \\(.*\\);.*42\[ \t\]+.*\}\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests } |
| timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| pass "successive list commands to page forward ($testcnt tests)" |
| gdb_stop_suppressing_tests; |
| } |
| |
| # Test that repeating the list linenum command doesn't print the same |
| # lines over again. Note that this test makes sure that the argument |
| # linenum is dropped, when we repeat the previous command. 'x/5i $pc' |
| # works the same way. |
| |
| proc test_repeat_list_command {} { |
| global gdb_prompt |
| |
| set testcnt 0 |
| |
| send_gdb "list list0.c:10\n" |
| gdb_expect { |
| -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests } |
| timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| send_gdb "\n" |
| gdb_expect { |
| -re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests } |
| timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| send_gdb "\n" |
| gdb_expect { |
| -re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests } |
| timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| send_gdb "\n" |
| gdb_expect { |
| -re "35\[ \t\]+foo \\(.*\\);.*42\[ \t\]+.*\}\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests } |
| timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| pass "repeat list commands to page forward using 'return' ($testcnt tests)" |
| gdb_stop_suppressing_tests; |
| } |
| |
| proc test_list_backwards {} { |
| global gdb_prompt |
| |
| set testcnt 0 |
| |
| send_gdb "list list0.c:33\n" |
| gdb_expect { |
| -re "28\[ \t\]+foo \\(.*\\);.*37\[ \t\]+\}\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list list0.c:33" ; gdb_suppress_tests } |
| timeout { fail "list list0.c:33 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| send_gdb "list -\n" |
| gdb_expect { |
| -re "18\[ \t\]+foo \[(\]+.*\[)\]+;.*27\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list 18-27" ; gdb_suppress_tests } |
| timeout { fail "list 18-27 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| send_gdb "list -\n" |
| gdb_expect { |
| -re "8\[ \t\]+breakpoint\[(\]\[)\];.*17\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list 8-17" ; gdb_suppress_tests } |
| timeout { fail "list 8-17 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| send_gdb "list -\n" |
| gdb_expect { |
| -re "1\[ \t\]+#include .*7\[ \t\]+set_debug_traps\[(\]\[)\]+;\r\n$gdb_prompt $" { incr testcnt } |
| -re ".*$gdb_prompt $" { fail "list 1-7" ; gdb_suppress_tests } |
| timeout { fail "list 1-7 (timeout)" ; gdb_suppress_tests } |
| } |
| |
| pass "$testcnt successive \"list -\" commands to page backwards" |
| gdb_stop_suppressing_tests; |
| } |
| |
| # |
| # Test "list first,last" |
| # |
| |
| proc test_list_range {} { |
| global gdb_prompt |
| |
| gdb_test "list list0.c:2,list0.c:5" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+.*5\[ \t\]+int x;" "list range; filename:line1,filename:line2" |
| |
| gdb_test "list 2,5" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+.*5\[ \t\]+int x;" "list range; line1,line2" |
| |
| # gdb_test "list -1,6" "Line number 0 out of range; .*list0.c has 39 lines." "list range; lower bound negative" |
| |
| # gdb_test "list -100,-40" "Line number -60 out of range; .*list0.c has 39 lines." "list range; both bounds negative" |
| |
| gdb_test "list 30,45" "30\[ \t\]+foo \(.*\);.*43\[ \t\]+\}" "list range; upper bound past EOF" |
| |
| gdb_test "list 45,100" "Line number 45 out of range; .*list0.c has 43 lines." "list range; both bounds past EOF" |
| |
| gdb_test "list list0.c:2,list1.c:17" "Specified start and end are in different files." "list range, must be same files" |
| } |
| |
| # |
| # Test "list filename:function" |
| # |
| |
| proc test_list_filename_and_function {} { |
| global gdb_prompt |
| |
| set testcnt 0 |
| |
| # gcc appears to generate incorrect debugging information for code |
| # in include files, which breaks this test. |
| # SunPRO cc is the second case below, it's also correct. |
| send_gdb "list list0.c:main\n" |
| gdb_expect { |
| -re "1\[ \t\]+#include .*10\[ \t\]+x = 0;\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { |
| pass "list function in source file 1" |
| } |
| -re ".*$gdb_prompt $" { fail "list list0.c:main" } |
| timeout { fail "list list0.c:main (timeout)" } |
| } |
| |
| # Not sure what the point of having this function be unused is. |
| # AIX is legitimately removing it. |
| setup_xfail "rs6000-*-aix*" |
| send_gdb "list list0.c:unused\n" |
| gdb_expect { |
| -re "40\[ \t\]+unused.*43\[ \t\]+\}\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re "37.*42\[ \t\]+\}\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re ".*$gdb_prompt $" { fail "list list0.c:unused" } |
| timeout { fail "list list0.c:unused (timeout)" } |
| } |
| clear_xfail "rs6000-*-aix*" |
| |
| # gcc appears to generate incorrect debugging information for code |
| # in include files, which breaks this test. |
| # Ultrix gdb is the second case, one line different but still correct. |
| # SunPRO cc is the third case. |
| setup_xfail "rs6000-*-*" 1804 |
| setup_xfail "powerpc-*-*" 1804 |
| setup_xfail_format "COFF" |
| send_gdb "list list0.h:foo\n" |
| gdb_expect { |
| -re "2\[ \t\]+including file. This.*11\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re "1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re "3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re "No source file named list0.h.\r\n$gdb_prompt $" { |
| fail "list list0.h:foo" |
| } |
| -re ".*$gdb_prompt $" { fail "list list0.h:foo" } |
| timeout { fail "list list0.h:foo (timeout)" } |
| } |
| |
| # Ultrix gdb is the second case. |
| send_gdb "list list1.c:bar\n" |
| gdb_expect { |
| -re "4\[ \t\]+void.*13\[ \t\]+\}\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re "4\[ \t\]+void.*12\[ \t\]*long_line ..;\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re "4\[ \t\]+void.*11\[ \t\]*\r\n$gdb_prompt $" { |
| incr testcnt |
| } |
| -re ".*$gdb_prompt $" { fail "list list1.c:bar" } |
| timeout { fail "list list1.c:bar (timeout)" } |
| } |
| |
| # Not sure what the point of having this function be unused is. |
| # AIX is legitimately removing it. |
| setup_xfail "rs6000-*-aix*" |
| send_gdb "list list1.c:unused\n" |
| gdb_expect { |
| -re "12\[ \t\]+long_line \[(\]\[)\];.*13\[ \t\]+\}\r\n.*$gdb_prompt $" { |
| incr testcnt |
| } |
| -re "14.*19\[ \t\]+\}\r\n.*$gdb_prompt $" { |
| incr testcnt |
| } |
| -re ".*$gdb_prompt $" { fail "list list1.c:unused" } |
| timeout { fail "list list1.c:unused (timeout)" } |
| } |
| clear_xfail "rs6000-*-aix*" |
| |
| pass "list filename:function ($testcnt tests)" |
| |
| # Test some invalid specs |
| # The following test takes the FIXME result on most systems using |
| # DWARF. It fails to notice that main() is not in the file requested. |
| |
| setup_xfail "*-*-*" |
| |
| # Does this actually work ANYWHERE? I believe not, as this is an `aspect' of |
| # lookup_symbol(), where, when it is given a specific symtab which does not |
| # contain the requested symbol, it will subsequently search all of the symtabs |
| # for the requested symbol. |
| |
| gdb_test "list list0.c:foo" "Function \"foo\" not defined in .*list0.c" "list filename:function; wrong filename rejected" |
| |
| gdb_test "list foobar.c:main" "No source file named foobar.c.|Location not found" "list filename:function; nonexistant file" |
| |
| gdb_test "list list0.h:foobar" "Function \"foobar\" not defined.|Location not found" "list filename:function; nonexistant function" |
| |
| } |
| |
| proc test_forward_search {} { |
| global timeout |
| |
| gdb_test "set listsize 4" "" |
| # On SunOS4, this gives us lines 19-22. On AIX, it gives us |
| # lines 20-23. This depends on whether the line number of a function |
| # is considered to be the openbrace or the first statement--either one |
| # is acceptable. |
| gdb_test "list long_line" "24\[ \t\]+long_line .*" |
| |
| gdb_test "search 4321" " not found" |
| |
| gdb_test "search 6789" "28\[ \t\]+oof .6789.;" |
| |
| # Test that GDB won't crash if the line being searched is extremely long. |
| |
| set oldtimeout $timeout |
| set timeout [expr "$timeout + 300"] |
| verbose "Timeout is now $timeout seconds" 2 |
| gdb_test "search 1234" ".*1234.*" "search extremely long line (> 5000 chars)" |
| set timeout $oldtimeout |
| verbose "Timeout is now $timeout seconds" 2 |
| } |
| |
| # Start with a fresh gdb. |
| |
| gdb_exit |
| gdb_start |
| gdb_reinitialize_dir $srcdir/$subdir |
| gdb_load ${binfile} |
| |
| if [target_info exists gdb_stub] { |
| gdb_step_for_stub; |
| } |
| |
| gdb_test "set width 0" "" "set width 0" |
| |
| test_listsize |
| get_debug_format |
| if [ set_listsize 10 ] then { |
| test_list_include_file |
| test_list_filename_and_number |
| test_list_function |
| test_list_forward |
| test_list_backwards |
| test_repeat_list_command |
| test_list_range |
| test_list_filename_and_function |
| test_forward_search |
| } |
| |
| remote_exec build "rm -f list0.h" |
