| 2007-12-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (prefix_table): Use "%LQ" on cvtsi2ss/cvtsi2sd. |
| (putop): Handle '%' and "LQ". |
| |
| * i386-opc.tbl: Remove IgnoreSize from cvtsi2ss/cvtsi2sd. |
| * i386-tbl.h: Regenerated. |
| |
| 2007-12-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (cpu_flag_init): Add CpuSSE4_1_Or_5 to |
| CPU_SSE4_1_FLAGS, CPU_SSE4_2_FLAGS and CPU_SSE5_FLAGS. |
| (cpu_flags): Add CpuSSE4_1_Or_5. |
| |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| * i386-opc.h (CpuSSE4_1_Or_5): New. |
| (CpuLM): Updated. |
| (i386_cpu_flags): Add cpusse4_1_or_5. |
| |
| * i386-opc.tbl: Use CpuSSE4_1_Or_5 instead of CpuSSE4_1|CpuSSE5 |
| on ptest, roundpd, roundps, roundsd and roundss. |
| |
| 2007-12-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (opcode_modifiers): Add OldGcc, ATTMnemonic and |
| IntelMnemonic. |
| |
| * i386-opc.h (OldGcc): New. |
| (ATTMnemonic): Likewise. |
| (IntelMnemonic): Likewise. |
| (Opcode_Modifier_Max): Updated. |
| (i386_opcode_modifier): Add oldgcc, attmnemonic and |
| intelmnemonic. |
| |
| * i386-opc.tbl: Update fadd, fdiv, fdivp, fdivr, fdivrp, fmul, |
| fsub, fsubp, fsubr and fsubrp with OldGcc, ATTMnemonic and |
| IntelMnemonic. |
| * i386-tbl.h: Regeneratd. |
| |
| 2007-12-22 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (intel_mnemonic): New. |
| (print_i386_disassembler_options): Display att-mnemonic and |
| intel-mnemonic options. |
| (print_insn): Handle att-mnemonic and intel-mnemonic. |
| (float_reg): Replace SYSV386_COMPAT with "!M" and "M". |
| (putop): Handle "!M" and "M". |
| |
| 2007-12-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am (i386-gen.o): Also depend on |
| $(srcdir)/../include/opcode/i386.h. |
| * Makefile.in: Regenerated. |
| |
| 2007-11-29 Mark Shinwell <shinwell@codesourcery.com> |
| |
| * mips-dis.c (mips_arch_choices): Add Loongson-2E and -2F |
| entries. |
| * mips-opc.c (IL2E): New. |
| (IL2F): New. |
| (mips_builtin_opcodes): Add Loongson-2E and -2F instructions. |
| Allow movz and movn for Loongson-2E and -2F. Add movnz entry. |
| Move coprocessor encodings to the end of the table. Allow |
| certain MIPS V .ps instructions on the Loongson-2E and -2F. |
| |
| 2007-11-29 Mark Shinwell <shinwell@codesourcery.com> |
| |
| * mips-opc.c (I3_32, I3_33, I4_32, I4_33, I5_33): New. |
| (mips_builtin_opcodes): Use these new I* values. |
| |
| 2007-11-27 Andreas Krebbel <krebbel1@de.ibm.com> |
| |
| * s390-opc.txt ("tcet", "tcdt", "tcxt", "tget", "tgdt", |
| "tgxt"): Removed. |
| ("tdcet", "tdcdt", "tdcxt", "tdget", "tdgdt", "tdgxt"): Added. |
| |
| 2007-11-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * ia64-ic.tbl: Updated for Itanium 9100 series. |
| * ia64-raw.tbl: Likewise. |
| * ia64-waw.tbl: Likewise. |
| * ia64-asmtab.c: Regenerated. |
| |
| 2007-11-14 Tristan Gingold <gingold@adacore.com> |
| |
| * ia64-dis.c (print_insn_ia64): Handle ar.ruc. |
| * ia64-gen.c (lookup_regindex): Likewise. |
| |
| 2007-11-07 Jens Arnold <jens@jens-arnold.net> |
| |
| PR gas/5228 |
| * m68k-opc.c (m68k_opcodes): Fix coldfire msac.w instructions with |
| parallel loads. |
| |
| 2007-11-07 Tristan Gingold <gingold@adacore.com> |
| |
| * ia64-dis.c (print_insn_ia64): Generate symbolic names for cr |
| registers instead of register number. |
| |
| 2007-11-07 David O'Brien <obrien@FreeBSD.org> |
| |
| * arm-dis.c (arm_opcodes): Remove superflous escapes of percent |
| operators. |
| |
| 2007-11-06 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Remove the dcffix and dcffix. opcodes |
| which are not included in the "Preliminary Decimal Floating-Point |
| Architecture" document. |
| |
| 2007-11-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (opcode_modifiers): Replace No_xSuf with |
| No_ldSuf. |
| * i386-opc.tbl: Likewise. |
| |
| * i386-opc.h (No_xSuf): Renamed to ... |
| (No_ldSuf): This. |
| (FWait): Updated. |
| |
| 2007-11-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (opcode_modifiers): Add ByteOkIntel, ToDword, |
| ToQword and AddrPrefixOp0. |
| |
| * i386-opc.h (ByteOkIntel): New. |
| (ToDword): Likewise. |
| (ToQword): Likewise. |
| (AddrPrefixOp0): Likewise. |
| (IsPrefix): Updated. |
| (i386_opcode_modifier): Add byteokintel, todword, toqword |
| and addrprefixop0. |
| |
| * i386-opc.tbl (cvtss2si): Add ToQword. |
| (cvttss2si): Likewise. |
| (cvtsd2si): Add ToDword. |
| (cvttsd2si): Likewise. |
| (monitor): Add AddrPrefixOp0. |
| (invlpga): Likewise. |
| (vmload): Likewise. |
| (vmrun): Likewise. |
| (vmsave): Likewise. |
| (pextrb): Add ByteOkIntel. |
| (pinsrb): Likewise. |
| * i386-tbl.h: Regenerated. |
| |
| 2007-10-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (USE_REG_TABLE): Defined as the previous one + 1. |
| (USE_REG_TABLE): Likewise. |
| (USE_MOD_TABLE): Likewise. |
| (USE_RM_TABLE): Likewise. |
| (USE_PREFIX_TABLE): Likewise. |
| (USE_X86_64_TABLE): Likewise. |
| (USE_3BYTE_TABLE): Likewise. |
| |
| 2007-10-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (MOD_0F2B_PREFIX_0...MOD_0F2B_PREFIX_3): New. |
| (MOD_0F51): Likewise. |
| (MOD_0FD7): Likewise. |
| (MOD_0FE7_PREFIX_2): Likewise. |
| (MOD_0F382A_PREFIX_2): Likewise. |
| (MOD_0F71_REG_2): Updated. |
| (MOD_0FF0_PREFIX_3): Likewise. |
| (MOD_62_32BIT): Likewise. |
| (dis386_twobyte): Use MOD_0F51 and MOD_0FD7. |
| (prefix_table): Use MOD_0F2B_PREFIX_0...MOD_0F2B_PREFIX_3, |
| MOD_0FE7_PREFIX_2 and MOD_0F382A_PREFIX_2. |
| (mod_table): Add MOD_0F2B_PREFIX_0...MOD_0F2B_PREFIX_3, |
| MOD_0F51, MOD_0FD7 and MOD_0F382A_PREFIX_2. |
| |
| 2007-10-26 Nick Clifton <nickc@redhat.com> |
| |
| * arm-dis.c (print_insn): Check for a symtab that exists but is |
| empty. |
| |
| 2007-10-24 Alan Modra <amodra@bigpond.net.au> |
| |
| * po/POTFILES.in: Regenerate. |
| |
| 2007-10-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OP_SIMD_Suffix): Renamed to ... |
| (CMP_Fixup): This. Rewrite. |
| (OPSIMD): Renamed to ... |
| (CMP): This. Updated. |
| (prefix_table): Update PREFIX_0FC2 entry. |
| |
| 2007-10-22 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (prefix_table): Reordered by opcode. |
| (mod_table): Likewise. |
| |
| 2007-10-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (prefix_table): Use XS on psrldq and pslldq. |
| |
| 2007-10-17 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k-opc.c (m68k_opcodes): Correct move sr and ccr masks for |
| coldfire. |
| |
| 2007-10-15 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Fix the first two operands of |
| dquaiq. to use the TE and FRT macros. |
| |
| 2007-10-15 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-opc.c (TE): Correct signedness. |
| (powerpc_opcodes): Sort psq_st and psq_stu according to major |
| opcode number. |
| |
| 2007-10-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (dis386_twobyte): Reformat. |
| (prefix_table): Likewise. |
| (three_byte_table): Likewise. |
| |
| 2007-10-15 Alan Modra <amodra@bigpond.net.au> |
| |
| * mcore-dis.c (print_insn_mcore): Protect "fprintf" var against |
| macro expansion. |
| |
| 2007-10-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (opcode_modifiers): Add FirstXmm0. |
| |
| * i386-opc.h (FirstXmm0): New. |
| (IsPrefix): Updated. |
| (i386_opcode_modifier): Add firstxmm0. |
| |
| * i386-opc.tbl (blendvpd): Replace RegKludge with FirstXmm0. |
| (blendvps): Likewise. |
| (pblendvb): Likewise. |
| * i386-tbl.h: Regenerated. |
| |
| 2007-10-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (prefix_table): Reformat pblendvb and blendvps. |
| |
| 2007-10-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (v_mode): Defined as previous one + 1. |
| (w_mode): Likewise. |
| (d_mode): Likewise. |
| (q_mode): Likewise. |
| (t_mode): Likewise. |
| (x_mode): Likewise. |
| (m_mode): Likewise. |
| (cond_jump_mode): Likewise. |
| (loop_jcxz_mode): Likewise. |
| (dq_mode): Likewise. |
| (dqw_mode): Likewise. |
| (f_mode): Likewise. |
| (const_1_mode): Likewise. |
| (stack_v_mode): Likewise. |
| (z_mode): Likewise. |
| (o_mode): Likewise. |
| (dqb_mode): Likewise. |
| (dqd_mode): Likewise. |
| (es_reg): Likewise. |
| (cs_reg): Likewise. |
| (ss_reg): Likewise. |
| (ds_reg): Likewise. |
| (fs_reg): Likewise. |
| (gs_reg): Likewise. |
| (eAX_reg): Likewise. |
| (eCX_reg): Likewise. |
| (eDX_reg): Likewise. |
| (eBX_reg): Likewise. |
| (eSP_reg): Likewise. |
| (eBP_reg): Likewise. |
| (eSI_reg): Likewise. |
| (eDI_reg): Likewise. |
| (al_reg): Likewise. |
| (cl_reg): Likewise. |
| (dl_reg): Likewise. |
| (bl_reg): Likewise. |
| (ah_reg): Likewise. |
| (ch_reg): Likewise. |
| (dh_reg): Likewise. |
| (bh_reg): Likewise. |
| (ax_reg): Likewise. |
| (cx_reg): Likewise. |
| (dx_reg): Likewise. |
| (bx_reg): Likewise. |
| (sp_reg): Likewise. |
| (bp_reg): Likewise. |
| (si_reg): Likewise. |
| (di_reg): Likewise. |
| (rAX_reg): Likewise. |
| (rCX_reg): Likewise. |
| (rDX_reg): Likewise. |
| (rBX_reg): Likewise. |
| (rSP_reg): Likewise. |
| (rBP_reg): Likewise. |
| (rSI_reg): Likewise. |
| (rDI_reg): Likewise. |
| (z_mode_ax_reg): Likewise. |
| (indir_dx_reg): Likewise. |
| (DREX_OC1): Updated. |
| (DREX_NO_OC0): Likewise. |
| (DREX_MASK): Likewise. |
| (MAX_BYTEMODE): New. Issue an error if MAX_BYTEMODE is not |
| less than DREX_OC1. |
| |
| 2007-10-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c: Updated comments for 'Y'. |
| (putop): Don't add 'q' for 'Y' if suffix_always isn't true. |
| |
| 2007-10-08 Maciej W. Rozycki <macro@linux-mips.org> |
| |
| * opcodes/mips-dis.c (mips_cp0_names_r3000): New definition. |
| (mips_cp0_names_r4000): Likewise. |
| (mips_arch_choices): Link to the above as appropriate. |
| |
| 2007-10-08 Nick Clifton <nickc@redhat.com> |
| |
| * configure.in (SHARED_DEPENDENCIES): Change non-cygwin dependency |
| to be ../bfd/libbfd.la. |
| * configure: Regenerate. |
| |
| 2007-10-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (dis386_twobyte): Add getsec. |
| |
| * i386-gen.c (cpu_flags): Add CpuSMX. |
| |
| * i386-opc.h (CpuSMX): New. |
| (CpuSSSE3): Updated. |
| (i386_cpu_flags): Add cpusmx. |
| |
| * i386-opc.tbl: Add getsec. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2007-10-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (reg_table): Use "{ XX }" on "(bad)". |
| (prefix_table): Likewise. |
| |
| 2007-10-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (dis386_twobyte): Use EXx instead of EXq on |
| unpckhpX and unpckhpX. |
| |
| 2007-10-04 David Daney <ddaney@avtrex.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Mark lwxc1 as working on FP_S |
| registers. |
| |
| 2007-10-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (MOD_0F12_PREFIX_0): Use "movlps" and "movhlps" |
| instead of "movlpX" and "movhlpX", respectively. |
| (MOD_0F16_PREFIX_0): Use "movhps" and "movlhps" instead of |
| "movhpX" and "movlhpX", respectively. |
| |
| 2007-10-04 Nick Clifton <nickc@redhat.com> |
| |
| * configure.in (WIN32LDFLAGS): Rename to SHARED_LDFLAGS. |
| (WIN32LIBADD): Rename to SHARED_LIBADD |
| (SHARED_DEPENDENCIES): New exported variable. |
| (enable_shared): Add dependency upon libbfd.la for non-cygwin |
| based shared library builds. |
| * Makefile.am (libopcodes_la_DEPENDENCIES): Append |
| SHARED_DEPENDENCIES. |
| (libopcodes_la_LIBADD): Rename WIN32LIBADD to SHARED_LIBADD. |
| (libopcodes_la_LDFLAGS): Rename WIN32LDFLAGS to SHARED_LDFLAGS. |
| * configure: Regenerate. |
| * Makefile.in: Regenerate. |
| |
| PR gas/5100 |
| * arc-opc.c (insert_offset): Fix spelling mistake in error |
| message. |
| |
| 2007-10-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OP_REG): Set add to 0 only when needed. |
| (OP_C): Likewise. |
| (OP_D): Likewise. |
| (OP_MMX): Likewise. |
| (OP_XMM): Likewise. |
| (OP_EM): Likewise. |
| (OP_MXC): Likewise. |
| (OP_EX): Likewise. |
| |
| 2007-10-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.tbl: Update SSE comments. |
| |
| 2007-10-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (THREE_BYTE_0FBA): Renamed to ... |
| (THREE_BYTE_0F7B): This. |
| (dis386_twobyte): Updated. |
| (three_byte_table): Updated comments. |
| |
| 2007-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com> |
| |
| * cr16-opc.c: Updated the branch on condition instructions with |
| RELAXABLE flag. |
| |
| 2007-09-30 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * 386-dis.c (prefix_table): Reformat comment. |
| |
| 2007-09-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * 386-dis.c (USE_GROUPS): Renamed to ... |
| (USE_REG_TABLE): This. |
| (USE_OPC_EXT_TABLE): Renamed to ... |
| (USE_MOD_TABLE): This. |
| (USE_OPC_EXT_RM_TABLE): Renamed to ... |
| (USE_RM_TABLE): This. |
| (USE_XXX_TABLE): Reordered. |
| (GRP): Renamed to ... |
| (REG_TABLE): This. |
| (OPC_EXT_TABLE): Renamed to ... |
| (MOD_TABLE): This. |
| (OPC_EXT_RM_TABLE): Renamed to ... |
| (RM_TABLE): This. |
| (GRP_XXX): Renamed to ... |
| (REG_XXX): This. |
| (PREGRP_XXX): Renamed to ... |
| (PREFIX_XXX): This. |
| (OPC_EXT_XXX): Renamed to ... |
| (MOD_XXX): This. |
| (OPC_EXT_RM_XXX): Renamed to ... |
| (RM_XXX): This. |
| (grps): Renamed to ... |
| (reg_table): This |
| (prefix_user_table): Renamed to ... |
| (prefix_table): This |
| (opc_ext_table): Renamed to ... |
| (mod_table): This |
| (opc_ext_rm_table): Renamed to ... |
| (rm_table): This |
| (OPC_EXT_RM_XXX): Likewise. |
| (dis386): Updated. |
| (dis386_twobyte): Likewise. |
| (reg_table): Likewise. |
| (prefix_table): Likewise. |
| (x86_64_table): Likewise. |
| (three_byte_table): Likewise. |
| (mod_table): Likewise. |
| (rm_table): Likewise. |
| (get_valid_dis386): Likewise. |
| |
| 2007-09-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * 386-dis.c (USE_PREFIX_USER_TABLE): Renamed to ... |
| (USE_PREFIX_TABLE): This. |
| (X86_64_SPECIAL): Renamed to ... |
| (USE_X86_64_TABLE): This. |
| (IS_3BYTE_OPCODE): Renamed to ... |
| (USE_3BYTE_TABLE): This. |
| (GRPXXX): Removed. |
| (PREGRPXXX): Likewise. |
| (X86_64_XXX): Likewise. |
| (THREE_BYTE_XXX): Likewise. |
| (OPC_EXT_XXX): Likewise. |
| (OPC_EXT_RM_XXX): Likewise. |
| (DIS386): New. |
| (GRP): Likewise. |
| (PREGRP): Likewise. |
| (X86_64_TABLE): Likewise. |
| (THREE_BYTE_TABLE): Likewise. |
| (OPC_EXT_TABLE): Likewise. |
| (OPC_EXT_RM_TABLE): Likewise. |
| (GRP_XXX): Likewise. |
| (PREGRP_XXX): Likewise. |
| (X86_64_XXX): Likewise. |
| (THREE_BYTE_XXX): Likewise. |
| (OPC_EXT_XXX): Likewise. |
| (OPC_EXT_RM_XXX): Likewise. |
| (dis386): Updated. |
| (dis386_twobyte): Likewise. |
| (grps): Likewise. |
| (prefix_user_table): Likewise. |
| (x86_64_table): Likewise. |
| (three_byte_table): Likewise. |
| (opc_ext_table): Likewise. |
| (opc_ext_rm_table): Likewise. |
| (get_valid_dis386): Likewise. |
| |
| 2007-09-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (dis386): Swap X86_64_27 with OPC_EXT_2. |
| (x86_64_table): Likewise. |
| (opc_ext_table): Likewise. |
| |
| 2007-09-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/5072 |
| * i386-dis.c: Update comments on '{', '}' and '|' to support |
| only AT&T and Intel modes. |
| (X86_64_4...X86_64_27): New. |
| (dis386): Updated. Use X86_64_4...X86_64_21. |
| (dis386_twobyte): Updated. |
| (float_mem): Likewise. |
| (x86_64_table): Add X86_64_4...X86_64_27. |
| (opc_ext_table): Updated. Use X86_64_22...X86_64_27. |
| (putop): Updated handling of '{', '}' and '|' to support only |
| AT&T and Intel modes. |
| |
| 2007-09-27 Kazu Hirata <kazu@codesourcery.com> |
| |
| * m68k-dis.c (print_insn_arg): Use %mbo instead of %mbb. |
| |
| 2007-09-26 James E. Wilson <wilson@specifix.com> |
| |
| * ia64-gen.c (print_dependency_table): Fix typo in last patch. |
| |
| 2007-09-26 Nick Clifton <nickc@redhat.com> |
| |
| * mt-asm.c (parse_imm16): Reword error message in order to allow |
| it to be translated properly. |
| * ia64-gen.c (print_dependency_table): Likewise. |
| * mips-dis.c (print_insn_args): Likewise. |
| |
| 2007-09-26 Jan Beulich <jbeulich@novell.com> |
| |
| * i386-dis.c (OP_E_extended): Distinguish rip- and eip- |
| relative addressing. Update used_prefixes based on whether any |
| base or index register was printed. |
| |
| 2007-09-26 Jan Beulich <jbeulich@novell.com> |
| |
| * i386-opc.h (RegEip): Define. |
| (RegEiz): Adjust. |
| * i386-reg.tbl: Add eip. Mark rip and eip with RegRex64. |
| * i386-tbl.h: Re-generate. |
| |
| 2007-09-25 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (process_i386_opcodes): Process opcode_length. |
| |
| * i386-opc.h (template): Add opcode_length. |
| * 386-opc.tbl: Likewise. |
| * i386-tbl.h: Regenerated. |
| |
| 2007-09-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.h: Adjust whitespaces. |
| |
| 2007-09-21 Dave Brolley <brolley@redhat.com> |
| |
| * mep-desc.c: Regenerated. |
| |
| 2007-09-20 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OP_E_extended): Display eiz for [eiz*1 + offset]. |
| |
| 2007-09-20 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR 658 |
| * 386-dis.c (index64): New. |
| (index32): Likewise. |
| (intel_index64): Likewise. |
| (intel_index32): Likewise. |
| (att_index64): Likewise. |
| (att_index32): Likewise. |
| (print_insn): Set index64 and index32. |
| (OP_E_extended): Use index64/index32 for index register for |
| SIB with INDEX == 4. |
| |
| * i386-opc.h (RegEiz): New. |
| (RegRiz): Likewise. |
| |
| * i386-reg.tbl: Add eiz and riz. |
| * i386-tbl.h: Regenerated. |
| |
| 2007-09-19 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OP_E_extended): Always display scale for memory. |
| |
| 2007-09-17 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.h (RegRip): New. |
| |
| * i386-reg.tbl (rip): Use RegRip for reg_num. |
| * i386-tbl.h: Regenerated. |
| |
| 2007-09-17 Nick Clifton <nickc@redhat.com> |
| |
| * po/es.po: Updated Spanish translation. |
| |
| 2007-09-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| |
| 2007-09-14 Michael Meissner <michael.meissner@amd.com> |
| Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> |
| Tony Linthicum <tony.linthicum@amd.com> |
| |
| * i386-opc.h (CpuSSE5): New macro. |
| (i386_cpu_flags): Add Drex, Drexv and Drexc. |
| |
| * i386-gen.c (cpu_flag_init): Add CPU_SSE5_FLAGS. |
| (operand_type_init): Add CpuSSE5. |
| (opcode_modifiers): Add Drex, Drexv and Drexc. |
| (i386_opcode_modifier): Ditto. |
| |
| * i386-opc.tbl (fmaddps,fmaddpd,fmaddss,fmaddsd): Define SSE5 |
| instructions here. |
| (fmsubps,fmsubpd,fmsubss,fmsubsd): Ditto. |
| (fnmaddps,fnmaddpd,fnmaddss,fnmaddsd): Ditto. |
| (fnmsubps,fnmsubpd,fnmsubss,fnmsubsd): Ditto. |
| (pmacssww,pmacsww,pmacsswd,pmacswd): Ditto. |
| (pmacssdd,pmacsdd,pmacssdql,pmacssdqh): Ditto. |
| (pmacsdql,pmacsdqh,pmadcsswd,pmadcswd): Ditto. |
| (phaddbw,phaddbd,phaddbq,phaddwd): Ditto. |
| (phaddwq,phadddq,phaddubw,phaddubd): Ditto. |
| (phaddubq,phadduwd,phadduwq,phaddudq): Ditto. |
| (phsubbw,phsubwd,phsubdq): Ditto. |
| (pcmov,pperm,permps,permpd): Ditto. |
| (protb,protw,protd,protq): Ditto. |
| (pshlb,pshlw,pshld,pshlq): Ditto. |
| (pshab,pshaw,pshad,pshaq): Ditto. |
| (comps,comeqps,comltps,comungeps,comleps,comungtps): Ditto. |
| (comunordps,comneps,comneqps,comnltps,comugeps): Ditto. |
| (comnleps,comugtps,comordps,comueqps,comultps): Ditto. |
| (comngeps,comuleps,comngtps,comfalseps,comuneps): Ditto. |
| (comuneqps,comunltps,comgeps,comunleps,comgtps,comtrueps): Ditto. |
| (compd,comeqpd,comltpd,comungepd,comlepd,comungtpd,comunordpd): Ditto. |
| (comnepd,comneqpd,comnltpd,comugepd,comnlepd,comugtpd): Ditto. |
| (comordpd,comueqpd,comultpd,comngepd,comulepd,comngtpd): Ditto. |
| (comfalsepd,comunepd,comuneqpd,comunltpd,comgepd): Ditto. |
| (comunlepd,comgtpd,comtruepd): Ditto. |
| (comss,comeqss,comltss,comungess,comless,comungtss,comunordss): Ditto. |
| (comness,comneqss,comnltss,comugess,comnless,comugtss): Ditto. |
| (comordss,comueqss,comultss,comngess,comuless,comngtss): Ditto. |
| (comfalsess,comuness,comuneqss,comunltss,comgess): Ditto. |
| (comunless,comgtss,comtruess): Ditto. |
| (comsd,comeqsd,comltsd,comungesd,comlesd,comungtsd,comunordsd): Ditto. |
| (comnesd,comneqsd,comnltsd,comugesd,comnlesd,comugtsd): Ditto. |
| (comordsd,comueqsd,comultsd,comngesd,comulesd,comngtsd): Ditto. |
| (comfalsesd,comunesd,comuneqsd,comunltsd,comgesd): Ditto. |
| (comunlesd,comgtsd,comtruesd): Ditto. |
| (pcomub,pcomltub,pcomleub,pcomgtub,pcomgeub,pcomequb): Ditto. |
| (pcomnequb,pcomneub): Ditto. |
| (pcomuw,pcomltuw,pcomleuw,pcomgtuw,pcomgeuw,pcomequw): Ditto. |
| (pcomnequw,pcomneuw): Ditto. |
| (pcomud,pcomltud,pcomleud,pcomgtud,pcomgeud,pcomequd): Ditto. |
| (pcomnequd,pcomneud): Ditto. |
| (pcomuq,pcomltuq,pcomleuq,pcomgtuq,pcomgeuq,pcomequq): Ditto. |
| (pcomnequq,pcomneuq): Ditto. |
| (pcomb,pcomltb,pcomleb,pcomgtb,pcomgeb,pcomeqb): Ditto. |
| (pcomneqb,pcomneb): Ditto. |
| (pcomw,pcomltw,pcomlew,pcomgtw,pcomgew,pcomeqw): Ditto. |
| (pcomneqw,pcomnew): Ditto. |
| (pcomd,pcomltd,pcomled,pcomgtd,pcomged,pcomeqd): Ditto. |
| (pcomneqd,pcomned): Ditto. |
| (pcomq,pcomltq,pcomleq,pcomgtq,pcomgeq): Ditto. |
| (pcomeqq,pcomneqq,pcomneq): Ditto. |
| (pcomtrueb, pcomtruew, pcomtrued, pcomtrueq): Ditto. |
| (pcomtrueub, pcomtrueuw, pcomtrueud, pcomtrueuq): Ditto. |
| (pcomfalseb, pcomfalsew, pcomfalsed, pcomfalseq): Ditto. |
| (pcomfalseub, pcomfalseuw, pcomfalseud, pcomfalseuq): Ditto. |
| (frczps,frczpd,frczss,frczsd): Ditto. |
| (cvtph2ps,cvtps2ph): Ditto. |
| |
| * i386-tbl.h: Regenerate from i386-opc.tbl. |
| * i386-init.h: Likewise. |
| |
| * i386-dis.c (libiberty.h): Include to get ARRAY_SIZE. |
| (dis386_move_test): New disassembly support for move from test |
| register instruction that overlaps with SSE5 instructions. |
| (print_insn): Add support for special casing the i386/i486 move |
| from test register instruction that overlaps with the SSE5 |
| 0x0f24 4 operand instructions. |
| (OP_DREX_ICMP): New macros for SSE5 DREX handling. |
| (OP_DREX_FCMP): Ditto. |
| (OP_E_extended): Rename from OP_E, add additional argument to skip |
| the DREX byte. |
| (OP_E): Call OP_E_extended. |
| (DREX_REG_MEMORY): New macros for drex handling. |
| (DREX_REG_UNKNOWN): Ditto. |
| (DREX4_OC1): Ditto. |
| (DREX4_NO_OC0): Ditto. |
| (DREX4_MASK): Ditto. |
| (three_byte_table): Add SSE5 instructions. |
| (print_drex_arg): New function to print a DREX register or memory |
| reference. |
| (OP_DREX4): New function for handling DREX 4 argument ops. |
| (OP_DREX3): New function for handling DREX 3 argument ops. |
| (twobyte_has_modrm): 0f{25,7a,7b} all use the modrm byte. |
| (THREE_BYTE_SSE5_0F{24,25,7A,7B}): New macros for initializing 3 |
| byte opcode support for SSE5 instructions. |
| (dis386_twobyte): Add SSE5 24/25/7a/7b support. |
| (three_byte_table): Add rows for describing SSE5 instructions. |
| |
| 2007-09-13 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (get_valid_dis386): Take a pointer to |
| disassemble_info. Handle IS_3BYTE_OPCODE. |
| (print_insn): Updated. Don't handle IS_3BYTE_OPCODE here. |
| |
| 2007-09-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.h (CpuUnused): Defined with CpuMax. |
| (OTUnused): Defined with OTMax. |
| |
| 2007-09-12 Jan Beulich <jbeulich@novell.com> |
| |
| * i386-opc.tbl: Add two-operand forms of blendvps, blendvpd, and |
| pblendvb. |
| * i386-tbl.h: Regenerate. |
| |
| 2007-09-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (main): Remove the local variable, unused. |
| |
| 2007-09-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| |
| 2007-09-08 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure.in (AC_CHECK_HEADERS): Add limits.h. |
| * configure: Regenerated. |
| * config.in: Likewise. |
| |
| * i386-gen.c: Include "sysdep.h" instead of <stdlib.h> and |
| <string.h>. Use xstrerror instead of strerror. |
| (initializer): New. |
| (cpu_flag_init): Likewise. |
| (bitfield): Likewise. |
| (BITFIELD): New. |
| (cpu_flags): Likewise. |
| (opcode_modifiers): Likewise. |
| (operand_types): Likewise. |
| (compare): Likewise. |
| (set_cpu_flags): Likewise. |
| (output_cpu_flags): Likewise. |
| (process_i386_cpu_flags): Likewise. |
| (output_opcode_modifier): Likewise. |
| (process_i386_opcode_modifier): Likewise. |
| (output_operand_type): Likewise. |
| (process_i386_operand_type): Likewise. |
| (set_bitfield): Likewise. |
| (operand_type_init): Likewise. |
| (process_i386_initializers): Likewise. |
| (process_i386_opcodes): Call process_i386_opcode_modifier to |
| process opcode_modifier. Call process_i386_operand_type to |
| process operand_types. |
| (process_i386_registers): Call process_i386_operand_type to |
| process reg_type. |
| (main): Check unused bits in i386_cpu_flags and i386_operand_type. |
| Sort cpu_flags, opcode_modifiers and operand_types. Call |
| process_i386_initializers. |
| |
| * i386-init.h: New. |
| * i386-tbl.h: Regenerated. |
| |
| * i386-opc.h: Include <limits.h>. |
| (CHAR_BIT): Define as 8 if not defined. |
| (Cpu186): Changed to position of bitfiled. |
| (Cpu286): Likewise. |
| (Cpu386): Likewise. |
| (Cpu486): Likewise. |
| (Cpu586): Likewise. |
| (Cpu686): Likewise. |
| (CpuP4): Likewise. |
| (CpuK6): Likewise. |
| (CpuK8): Likewise. |
| (CpuMMX): Likewise. |
| (CpuMMX2): Likewise. |
| (CpuSSE): Likewise. |
| (CpuSSE2): Likewise. |
| (Cpu3dnow): Likewise. |
| (Cpu3dnowA): Likewise. |
| (CpuSSE3): Likewise. |
| (CpuPadLock): Likewise. |
| (CpuSVME): Likewise. |
| (CpuVMX): Likewise. |
| (CpuSSSE3): Likewise. |
| (CpuSSE4a): Likewise. |
| (CpuABM): Likewise. |
| (CpuSSE4_1): Likewise. |
| (CpuSSE4_2): Likewise. |
| (Cpu64): Likewise. |
| (CpuNo64): Likewise. |
| (D): Likewise. |
| (W): Likewise. |
| (Modrm): Likewise. |
| (ShortForm): Likewise. |
| (Jump): Likewise. |
| (JumpDword): Likewise. |
| (JumpByte): Likewise. |
| (JumpInterSegment): Likewise. |
| (FloatMF): Likewise. |
| (FloatR): Likewise. |
| (FloatD): Likewise. |
| (Size16): Likewise. |
| (Size32): Likewise. |
| (Size64): Likewise. |
| (IgnoreSize): Likewise. |
| (DefaultSize): Likewise. |
| (No_bSuf): Likewise. |
| (No_wSuf): Likewise. |
| (No_lSuf): Likewise. |
| (No_sSuf): Likewise. |
| (No_qSuf): Likewise. |
| (No_xSuf): Likewise. |
| (FWait): Likewise. |
| (IsString): Likewise. |
| (RegKludge): Likewise. |
| (IsPrefix): Likewise. |
| (ImmExt): Likewise. |
| (NoRex64): Likewise. |
| (Rex64): Likewise. |
| (Ugh): Likewise. |
| (Reg8): Likewise. |
| (Reg16): Likewise. |
| (Reg32): Likewise. |
| (Reg64): Likewise. |
| (FloatReg): Likewise. |
| (RegMMX): Likewise. |
| (RegXMM): Likewise. |
| (Imm8): Likewise. |
| (Imm8S): Likewise. |
| (Imm16): Likewise. |
| (Imm32): Likewise. |
| (Imm32S): Likewise. |
| (Imm64): Likewise. |
| (Imm1): Likewise. |
| (BaseIndex): Likewise. |
| (Disp8): Likewise. |
| (Disp16): Likewise. |
| (Disp32): Likewise. |
| (Disp32S): Likewise. |
| (Disp64): Likewise. |
| (InOutPortReg): Likewise. |
| (ShiftCount): Likewise. |
| (Control): Likewise. |
| (Debug): Likewise. |
| (Test): Likewise. |
| (SReg2): Likewise. |
| (SReg3): Likewise. |
| (Acc): Likewise. |
| (FloatAcc): Likewise. |
| (JumpAbsolute): Likewise. |
| (EsSeg): Likewise. |
| (RegMem): Likewise. |
| (OTMax): Likewise. |
| (Reg): Commented out. |
| (WordReg): Likewise. |
| (ImplicitRegister): Likewise. |
| (Imm): Likewise. |
| (EncImm): Likewise. |
| (Disp): Likewise. |
| (AnyMem): Likewise. |
| (LLongMem): Likewise. |
| (LongMem): Likewise. |
| (ShortMem): Likewise. |
| (WordMem): Likewise. |
| (ByteMem): Likewise. |
| (CpuMax): New |
| (CpuLM): Likewise. |
| (CpuNumOfUints): Likewise. |
| (CpuNumOfBits): Likewise. |
| (CpuUnused): Likewise. |
| (OTNumOfUints): Likewise. |
| (OTNumOfBits): Likewise. |
| (OTUnused): Likewise. |
| (i386_cpu_flags): New type. |
| (i386_operand_type): Likewise. |
| (i386_opcode_modifier): Likewise. |
| (CpuSledgehammer): Removed. |
| (CpuSSE4): Likewise. |
| (CpuUnknownFlags): Likewise. |
| (Reg): Likewise. |
| (WordReg): Likewise. |
| (ImplicitRegister): Likewise. |
| (Imm): Likewise. |
| (EncImm): Likewise. |
| (Disp): Likewise. |
| (AnyMem): Likewise. |
| (LLongMem): Likewise. |
| (LongMem): Likewise. |
| (ShortMem): Likewise. |
| (WordMem): Likewise. |
| (ByteMem): Likewise. |
| (template): Use i386_cpu_flags for cpu_flags, use |
| i386_opcode_modifier for opcode_modifier, use |
| i386_operand_type for operand_types. |
| (reg_entry): Use i386_operand_type for reg_type. |
| |
| * Makefile.am (HFILES): Add i386-init.h. |
| ($(srcdir)/i386-init.h): New rule. |
| ($(srcdir)/i386-tbl.h): Depend on $(srcdir)/i386-init.h |
| instead. |
| * Makefile.in: Regenerated. |
| |
| 2007-09-06 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (next_field): Updated to take a separator. |
| (process_i386_opcodes): Updated. |
| (process_i386_registers): Likewise. |
| |
| 2007-09-06 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (table): Moved ... |
| (main): Here. Call process_copyright to output copyright. |
| (process_copyright): New. |
| (process_i386_opcodes): Take FILE *table. |
| (process_i386_registers): Likewise. |
| |
| 2007-09-06 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (table): New. |
| (process_i386_opcodes): Report errno when faied to open |
| i386-opc.tbl. Output opcodes to table. Close i386-opc.tbl |
| before return. |
| (process_i386_registers): Report errno when faied to open |
| i386-reg.tbl. Output opcodes to table. Close i386-reg.tbl |
| before return. |
| (main): Open i386-tbl.h for output. |
| |
| * Makefile.am ($(srcdir)/i386-tbl.h): Remove " > $@". |
| * Makefile.in: Regenerated. |
| |
| 2007-09-06 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.tbl: Correct SVME instructions to allow 32bit register |
| operand in 64bit mode. |
| * i386-tbl.h: Regenerated. |
| |
| 2007-08-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OPC_EXT_40...OPC_EXT_45): New. |
| (dis386_twobyte): Use OPC_EXT_40...OPC_EXT_45. |
| (opc_ext_table): Add OPC_EXT_40...OPC_EXT_45. |
| |
| 2007-08-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (SVME_Fixup): Removed. |
| (OPC_EXT_39): New. |
| (OPC_EXT_RM_6): Likewise. |
| (grps): Use OPC_EXT_39. |
| (opc_ext_table): Add OPC_EXT_39. |
| (opc_ext_rm_table): Add OPC_EXT_RM_6. |
| |
| * i386-opc.tbl: Correct SVME instructions to take register |
| operand only. |
| * i386-tbl.h: Regenerated. |
| |
| 2007-08-31 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am (INCLUDES): Remove -D_GNU_SOURCE. |
| * Makefile.in: Regenerated. |
| |
| * configure.in (AC_GNU_SOURCE): Added. |
| (AC_PROG_CC): Moved before AC_GNU_SOURCE. |
| (AC_CHECK_DECLS): Add stpcpy. |
| * configure: Regenerated. |
| * config.in: Likewise. |
| |
| * i386-dis.c: Include "sysdep.h" before "dis-asm.h". |
| |
| * sysdep.h (stpcpy): New. |
| |
| 2007-08-30 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (INVLPG_Fixup): Removed. |
| (OPC_EXT_38): New. |
| (OPC_EXT_RM_5): Likewise. |
| (grps): Use OPC_EXT_38. |
| (opc_ext_table): Add OPC_EXT_38. |
| (opc_ext_rm_table): Add OPC_EXT_RM_5. |
| |
| 2007-08-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (SIMD_Fixup): Removed. |
| (OPC_EXT_34...OPC_EXT_37): New. |
| (dis386_twobyte): Use OPC_EXT_34 and OPC_EXT_35. |
| (prefix_user_table): Use OPC_EXT_36 and OPC_EXT_37. |
| (opc_ext_table): Add OPC_EXT_34...OPC_EXT_37. |
| |
| 2007-08-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OPC_EXT_25...OPC_EXT_33): New. |
| (dis386): Use OPC_EXT_0...OPC_EXT_2. |
| (dis386_twobyte): Use OPC_EXT_3...OPC_EXT_5. |
| (grps): Updated to use OPC_EXT_6...OPC_EXT_31. |
| (prefix_user_table): Use OPC_EXT_32. |
| (x86_64_table): Use OPC_EXT_33. |
| (opc_ext_table): Reorder and add OPC_EXT_25...OPC_EXT_33. |
| |
| 2007-08-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (prefix_user_table): Fix comment. |
| |
| 2007-08-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OP_Skip_MODRM): New. |
| (OP_Monitor): Likewise. |
| (OP_Mwait): Likewise. |
| (Mb): Likewise. |
| (Skip_MODRM): Likewise. |
| (USE_OPC_EXT_TABLE): Likewise. |
| (USE_OPC_EXT_RM_TABLE): Likewise. |
| (PREGRP98...PREGRP100): Likewise. |
| (OPC_EXT_0...OPC_EXT_24): Likewise. |
| (OPC_EXT_RM_0...OPC_EXT_RM_4): Likewise. |
| (lock_prefix): Likewise. |
| (data_prefix): Likewise. |
| (addr_prefix): Likewise. |
| (repz_prefix): Likewise. |
| (repnz_prefix): Likewise. |
| (opc_ext_table): Likewise. |
| (opc_ext_rm_table): Likewise. |
| (get_valid_dis386): Likewise. |
| (OP_VMX): Removed. |
| (OP_0fae): Likewise. |
| (PNI_Fixup): Likewise. |
| (VMX_Fixup): Likewise. |
| (VM): Likewise. |
| (twobyte_uses_DATA_prefix): Likewise. |
| (twobyte_uses_REPNZ_prefix): Likewise. |
| (twobyte_uses_REPZ_prefix): Likewise. |
| (threebyte_0x38_uses_DATA_prefix): Likewise. |
| (threebyte_0x38_uses_REPNZ_prefix): Likewise. |
| (threebyte_0x38_uses_REPZ_prefix): Likewise. |
| (threebyte_0x3a_uses_DATA_prefix): Likewise. |
| (threebyte_0x3a_uses_REPNZ_prefix): Likewise. |
| (threebyte_0x3a_uses_REPZ_prefix): Likewise. |
| (grps): Use OPC_EXT_0...OPC_EXT_24. |
| (prefix_user_table): Add PREGRP98...PREGRP100. |
| (print_insn): Remove uses_DATA_prefix, uses_LOCK_prefix, |
| uses_REPNZ_prefix and uses_REPZ_prefix. Initialize |
| repz_prefix, repnz_prefix, lock_prefix, addr_prefix and |
| data_prefix based on prefixes. Call get_valid_dis386 to |
| get a pointer to the valid dis386. Print out prefixes if |
| they aren't NULL. |
| (OP_C): Clear lock_prefix if PREFIX_LOCK is used. |
| (REP_Fixup): Set repz_prefix to "rep " when seeing |
| PREFIX_REPZ. |
| |
| 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * po/nl.po: Updated translation. |
| |
| 2007-08-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (Md): New. |
| (grps): Use 0 on invlpg. Use M on fxsave and fxrstor. Use |
| Md on ldmxcsr and stmxcsr. Use b_mode on clflush. |
| (OP_0fae): Clear bytemode for sfence. |
| |
| 2007-08-22 Ben Elliston <bje@au.ibm.com> |
| |
| * ppc-opc.c (PSW, PSWM, PSQ, PSQM, PSD, MTMSRD_L): New. |
| (XOPS, XOPS_MASK, XW, XW_MASK): Likewise. |
| (PPCPS): Likewise. |
| (powerpc_opcodes): Add all pair singles instructions. |
| * ppc-dis.c (powerpc_dialect): Handle "ppcps". |
| (print_ppc_disassembler_options): Document -Mppcps. |
| |
| 2007-08-21 Andreas Krebbel <krebbel1@de.ibm.com> |
| |
| * s390-mkopc.c (struct s390_cond_ext_format): New global struct. |
| (s390_cond_ext_format): New global variable. |
| (expandConditionalJump): New function. |
| (main): Invoke expandConditionalJump for mnemonics containing '*'. |
| * s390-opc.txt: Replace mnemonics with conditional |
| mask extensions with instructions using the newly introduced '*' tag. |
| |
| 2007-08-17 Alan Modra <amodra@bigpond.net.au> |
| |
| * po/Make-in: Add --msgid-bugs-address to xgettext invocation. |
| |
| 2007-08-10 Nick Clifton <nickc@redhat.com> |
| |
| * po/fi.po: Updated Finnish translation. |
| * po/ga.po: Updated Irish translation. |
| * po/vi.po: Updated Vietnamese translation. |
| |
| 2007-08-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.tbl: Add NoRex64 to pmovsxbw, pmovsxwd, pmovsxdq, |
| pmovzxbw, pmovzxwd, pmovzxdq and roundsd. |
| * i386-tbl.h: Regenerated. |
| |
| 2007-08-03 James E. Wilson <wilson@specifix.com> |
| |
| * ia64-gen.c: (main): Add missing newline to copyright message. |
| * ia64-ic.tbl (fp-non-arith): Add xmpy. |
| * ia64-asmtab.c: Regenerate. |
| |
| 2007-08-01 Michael Snyder <msnyder@access-company.com> |
| |
| * i386-dis.c (print_insn): Guard against NULL. |
| |
| 2007-07-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/4834 |
| * i386-dis.c (EXw): New. |
| (prefix_user_table): Updated to use EXw, EXd and EXq for SSE4 |
| instructions when appropriated. |
| |
| 2007-07-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/4834 |
| * i386-dis.c (Eq): New. |
| (EMC): Renamed to ... |
| (EMCq): This. Use q_mode instead of v_mode. |
| (prefix_user_table): Updated to use EXd, EXq, EMCq, Ed and Eq |
| when appropriated. |
| |
| 2007-07-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (dis386_twobyte): Change "movd" to "movK". |
| (prefix_user_table): Likewise. Use EXq instead of EXx on |
| "movq". |
| |
| 2007-07-27 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * ppc-opc (PPC7450): New. |
| (powerpc_opcodes): Use it in dcba. |
| |
| 2007-07-24 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (main): Print a newline after copyright notice. |
| |
| 2007-07-19 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/4801 |
| * maxq-dis.c (get_reg_name): Fix the scan of the |
| mem_access_syntax_table. |
| |
| 2007-07-16 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (EMq): Removed. |
| (EMx): New. |
| (prefix_user_table): Replace EMq with EMx. |
| |
| 2007-07-16 Nick Clifton <nickc@redhat.com> |
| |
| * po/nl.po: Updated translation. |
| |
| 2007-07-12 Nick Clifton <nickc@redhat.com> |
| |
| * po/vi.po: Updated translation. |
| * po/nl.po: Updated translation. |
| |
| 2007-07-06 Mark Kettenis <kettenis@gnu.org> |
| H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am (i386-tbl.h): Add $(srcdir)/ to target. |
| (ia64-asmtab.c): Likewise. |
| * Makefile.in: Regenerate. |
| |
| 2007-07-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * aclocal.m4: Regenerated. |
| |
| 2007-07-04 Nick Clifton <nickc@redhat.com> |
| |
| * alpha-dis.c: Update copyright notice to refer to GPLv3. |
| * alpha-opc.c, arc-dis.c, arc-dis.h, arc-ext.c, arc-ext.h, |
| arc-opc.c, arm-dis.c, avr-dis.c, bfin-dis.c, cgen-asm.c, |
| cgen-asm.in, cgen-bitset.c, cgen-dis.c, cgen-dis.in, cgen-ibld.in, |
| cgen-opc.c, cgen-ops.h, cgen.sh, cgen-types.h, cr16-dis.c, |
| cr16-opc.c, cris-dis.c, cris-opc.c, crx-dis.c, crx-opc.c, |
| d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c, disassemble.c, |
| dis-buf.c, dis-init.c, dlx-dis.c, h8300-dis.c, h8500-dis.c, |
| h8500-opc.h, hppa-dis.c, i370-dis.c, i370-opc.c, i386-dis.c, |
| i386-gen.c, i386-opc.c, i386-opc.h, i860-dis.c, i960-dis.c, |
| ia64-asmtab.h, ia64-dis.c, ia64-gen.c, ia64-opc-a.c, ia64-opc-b.c, |
| ia64-opc.c, ia64-opc-d.c, ia64-opc-f.c, ia64-opc.h, ia64-opc-i.c, |
| ia64-opc-m.c, ia64-opc-x.c, m10200-dis.c, m10200-opc.c, |
| m10300-dis.c, m10300-opc.c, m68hc11-dis.c, m68hc11-opc.c, |
| m68k-dis.c, m68k-opc.c, m88k-dis.c, maxq-dis.c, mcore-dis.c, |
| mcore-opc.h, mips16-opc.c, mips-dis.c, mips-opc.c, mmix-dis.c, |
| mmix-opc.c, msp430-dis.c, ns32k-dis.c, opintl.h, or32-dis.c, |
| or32-opc.c, pdp11-dis.c, pdp11-opc.c, pj-dis.c, pj-opc.c, |
| ppc-dis.c, ppc-opc.c, s390-dis.c, s390-mkopc.c, s390-opc.c, |
| score-dis.c, score-opc.h, sh64-dis.c, sh64-opc.c, sh64-opc.h, |
| sh-dis.c, sh-opc.h, sparc-dis.c, sparc-opc.c, spu-dis.c, |
| spu-opc.c, sysdep.h, tic30-dis.c, tic4x-dis.c, tic54x-dis.c, |
| tic54x-opc.c, tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, |
| vax-dis.c, w65-dis.c, w65-opc.h, xtensa-dis.c, z80-dis.c, |
| z8k-dis.c, z8kgen.c: Likewise. |
| * i386-opc.tbl, i386-reg.tbl: Add copyright notice. |
| * aclocal.m4, configure, fr30-asm.c, fr30-desc.c, fr30-desc.h, |
| fr30-dis.c, fr30-ibld.c, fr30-opc.c, fr30-opc.h, frv-asm.c, |
| frv-desc.c, frv-desc.h, frv-dis.c, frv-ibld.c, frv-opc.c, |
| frv-opc.h, i386-tbl.h, ia64-asmtab.c, ip2k-asm.c, ip2k-desc.c, |
| ip2k-desc.h, ip2k-dis.c, ip2k-ibld.c, ip2k-opc.c, ip2k-opc.h, |
| iq2000-asm.c, iq2000-desc.c, iq2000-desc.h, iq2000-dis.c, |
| iq2000-ibld.c, iq2000-opc.c, iq2000-opc.h, m32c-asm.c, |
| m32c-desc.c, m32c-desc.h, m32c-dis.c, m32c-ibld.c, m32c-opc.c, |
| m32c-opc.h, m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c, |
| m32r-ibld.c, m32r-opc.c, m32r-opc.h, m32r-opinst.c, mep-asm.c, |
| mep-desc.c, mep-desc.h, mep-dis.c, mep-ibld.c, mep-opc.c, |
| mep-opc.h, mt-asm.c, mt-desc.c, mt-desc.h, mt-dis.c, mt-ibld.c, |
| mt-opc.c, mt-opc.h, openrisc-asm.c, openrisc-desc.c, |
| openrisc-desc.h, openrisc-dis.c, openrisc-ibld.c, openrisc-opc.c, |
| openrisc-opc.h, xc16x-asm.c, xc16x-desc.c, xc16x-desc.h, |
| xc16x-dis.c, xc16x-ibld.c, xc16x-opc.c, xc16x-opc.h, |
| xstormy16-asm.c, xstormy16-desc.c, xstormy16-desc.h, |
| xstormy16-dis.c, xstormy16-ibld.c, xstormy16-opc.c, |
| xstormy16-opc.h, z8k-opc.h: Regenerated |
| |
| 2007-07-04 M R Swami Reddy <MR.Swami.Reddy@nsc.com> |
| |
| * cr16-dis.c (getcinvstring): Add const qualifier to char * |
| parameter. |
| (print_insn_cr16): Remove cast to char *. |
| |
| 2007-07-03 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k-dis.c (fetch_arg): Add E. Replace length switch with |
| direct masking. |
| (print_ins_arg): Add j & K operand types. |
| (match_insn_m68k): Check and skip initial '.' arg character. |
| (m68k_scan_mask): Likewise. |
| * m68k-opc.c (m68k_opcodes): Add coprocessor instructions. |
| |
| 2007-07-02 Alan Modra <amodra@bigpond.net.au> |
| |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| * aclocal.m4: Regenerate. |
| * config.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2007-06-30 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * aclocal.m4: Regenerated. |
| * Makefile.in: Likewise. |
| |
| 2007-06-29 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-reg.tbl: Remove spaces before comments. |
| |
| 2007-06-29 M R Swami Reddy <MR.Swami.Reddy@nsc.com> |
| |
| * cr16-opc.c: New file. |
| * cr16-dis.c: New file. |
| * Makefile.am: Entries for cr16. |
| * Makefile.in: Regenerate. |
| * cofigure.in: Add cr16 target information. |
| * configure : Regenerate. |
| * disassemble.c: Add cr16 target information. |
| |
| 2007-06-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am (HFILES): Add i386-opc.h and i386-tbl.h. |
| (CFILES): Add i386-gen.c. |
| (i386-gen): New rule. |
| (i386-gen.o): Likewise. |
| (i386-tbl.h): Likewise. |
| Run "make dep-am". |
| * Makefile.in: Regenerated. |
| |
| * i386-gen.c: New file. |
| * i386-opc.tbl: Likewise. |
| * i386-reg.tbl: Likewise. |
| * i386-tbl.h: Likewise. |
| |
| * i386-opc.c: Include "i386-tbl.h". |
| (i386_optab): Removed. |
| (i386_regtab): Likewise. |
| (i386_regtab_size): Likewise. |
| |
| 2007-06-26 Paul Brook <paul@codesourcery.com> |
| |
| * arm-dis.c (coprocessor_opcodes): Add fmxr/fmrx mvfr0/mvfr1. |
| |
| 2007-06-25 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.h (regKludge): Renamed to ... |
| (RegKludge): This. |
| |
| * i386-opc.c (i386_optab): Replace regKludge with RegKludge. |
| |
| 2007-06-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/4667 |
| * i386-dis.c (EX): Removed. |
| (EMd): New. |
| (EMq): Likewise. |
| (EXd): Likewise. |
| (EXq): Likewise. |
| (EXx): Likewise. |
| (PREGRP93...PREGRP97): Likewise. |
| (dis386_twobyte): Updated. |
| (prefix_user_table): Updated. Add PREGRP93...PREGRP97. |
| (OP_EX): Remove Intel syntax handling. |
| |
| 2007-06-18 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k-opc.c (m68k_opcodes): Add wdebugl variants. |
| |
| 2007-06-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd. |
| |
| * acinclude.m4: Removed. |
| |
| * Makefile.in: Regenerated. |
| * doc/Makefile.in: Likewise. |
| * aclocal.m4: Likewise. |
| * configure: Likewise. |
| |
| 2007-06-05 Paul Brook <paul@codesourcery.com> |
| |
| * arm-dis.c (thumb32_opcodes): Display writeback ldrd/strd addresses. |
| |
| 2007-05-24 Steve Ellcey <sje@cup.hp.com> |
| |
| * Makefile.in: Regnerate. |
| * configure: Regenerate. |
| * aclocal.m4: Regenerate. |
| |
| 2007-05-18 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-dis.c (print_insn_powerpc): Don't skip all operands |
| after setting skip_optional. |
| |
| 2007-05-16 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-dis.c (operand_value_powerpc, skip_optional_operands): New. |
| (print_insn_powerpc): Use the new operand_value_powerpc and |
| skip_optional_operands functions to omit or print all optional |
| operands as a group. |
| * ppc-opc.c (BFF, W, XFL_L, XWRA_MASK): New. |
| (XFL_MASK): Delete L and W bits from the mask. |
| (mtfsfi, mtfsfi.): Replace use of BF with BFF. Relpace use of XRA_MASK |
| with XWRA_MASK. Use W. |
| (mtfsf, mtfsf.): Use XFL_L and W. |
| |
| 2007-05-14 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/4502 |
| * i386-dis.c (Suffix3DNow): Replace "pfmulhrw" with "pmulhrw". |
| |
| 2007-05-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.h (ShortForm): Redefined. |
| (Jump): Likewise. |
| (JumpDword): Likewise. |
| (JumpByte): Likewise. |
| (JumpInterSegment): Likewise. |
| (FloatMF): Likewise. |
| (FloatR): Likewise. |
| (FloatD): Likewise. |
| (Size16): Likewise. |
| (Size32): Likewise. |
| (Size64): Likewise. |
| (IgnoreSize): Likewise. |
| (DefaultSize): Likewise. |
| (No_bSuf): Likewise. |
| (No_wSuf): Likewise. |
| (No_lSuf): Likewise. |
| (No_sSuf): Likewise. |
| (No_qSuf): Likewise. |
| (No_xSuf): Likewise. |
| (FWait): Likewise. |
| (IsString): Likewise. |
| (regKludge): Likewise. |
| (IsPrefix): Likewise. |
| (ImmExt): Likewise. |
| (NoRex64): Likewise. |
| (Rex64): Likewise. |
| (Ugh): Likewise. |
| |
| 2007-05-07 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (threebyte_0x38_uses_DATA_prefix): Correct entries |
| for some SSE4 instructions. |
| (threebyte_0x3a_uses_DATA_prefix): Likewise. |
| |
| 2007-05-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (CRC32_Fixup): Don't print suffix in Intel mode. |
| |
| * i386-opc.c (i386_optab): Remove IgnoreSize and correct operand |
| type for crc32. |
| |
| 2007-05-01 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (CRC32_Fixup): Properly handle Intel mode and |
| check data size prefix in 16bit mode. |
| |
| * i386-opc.c (i386_optab): Default crc32 to non-8bit and |
| support Intel mode. |
| |
| 2007-04-30 Mark Salter <msalter@redhat.com> |
| |
| * frv-desc.c: Regenerate. |
| * frv-desc.h: Regenerate. |
| |
| 2007-04-30 Alan Modra <amodra@bigpond.net.au> |
| |
| PR 4436 |
| * ppc-opc.c (powerpc_operands): Correct bitm for second entry of MBE. |
| |
| 2007-04-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (modrm): Put reg before rm. |
| |
| 2007-04-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/4430 |
| * i386-dis.c (print_displacement): New. |
| (OP_E): Call print_displacement instead of print_operand_value |
| to output displacement when either base or index exist. Print |
| the explicit zero displacement in 16bit mode. |
| |
| 2007-04-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/4429 |
| * i386-dis.c (print_insn): Also swap the order of op_riprel |
| when swapping op_index. Break when the RIP relative address |
| is printed. |
| (OP_E): Properly handle RIP relative addressing and print the |
| explicit zero displacement for Intel mode. |
| |
| 2007-04-27 Alan Modra <amodra@bigpond.net.au> |
| |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| * ns32k-dis.c: Include sysdep.h first. |
| |
| 2007-04-24 Andreas Krebbel <krebbel1@de.ibm.com> |
| |
| * opcodes/s390-opc.c (MASK_SSF_RRDRD): Fourth nybble belongs to the |
| opcode. |
| * opcodes/s390-opc.txt (pfpo, ectg, csst): Add new z9-ec instructions. |
| |
| 2007-04-24 Nick Clifton <nickc@redhat.com> |
| |
| * arm-dis.c (print_insn): Initialise type. |
| |
| 2007-04-24 Alan Modra <amodra@bigpond.net.au> |
| |
| * cgen-types.h: Include bfd_stdint.h, not stdint.h. |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| |
| 2007-04-23 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k-opc.c: Mark mcfisa_c instructions. |
| |
| 2007-04-21 Richard Earnshaw <rearnsha@arm.com> |
| |
| * arm-dis.c (arm_opcodes): Disassemble to unified syntax. |
| (thumb_opcodes): Add missing white space in adr. |
| (arm_decode_shift): New parameter, print_shift. Only decode the |
| shift parameter if set. Adjust callers. |
| (print_insn_arm): Support for operand type q with no shift decode. |
| |
| 2007-04-21 Alan Modra <amodra@bigpond.net.au> |
| |
| * i386-opc.c (i386_float_regtab, i386_float_regtab_size): Delete. |
| Move contents to.. |
| (i386_regtab): ..here. |
| * i386-opc.h (i386_float_regtab, i386_float_regtab_size): Delete. |
| |
| * ppc-opc.c (powerpc_operands): Delete duplicate entries. |
| (BA_MASK, FXM_MASK, STRM_MASK, VA_MASK, VB_MASK, VC_MASK): Delete. |
| (VD_MASK, WS_MASK, MTMSRD_L, XRT_L): Delete. |
| (powerpc_opcodes): Replace uses of MTMSRD_L and XRT_L. |
| |
| 2007-04-20 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k-dis.c (print_insn_arg): Show c04 as rambar0 and c05 as |
| rambar1. |
| |
| 2007-04-20 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand |
| change. |
| * ppc-opc.c (powerpc_operands): Replace bit count with bit mask |
| in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove |
| references to following deleted functions. |
| (insert_bd, extract_bd, insert_dq, extract_dq): Delete. |
| (insert_ds, extract_ds, insert_de, extract_de): Delete. |
| (insert_des, extract_des, insert_li, extract_li): Delete. |
| (insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete. |
| (insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete. |
| (num_powerpc_operands): New constant. |
| (XSPRG_MASK): Remove entire SPRG field. |
| (powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK. |
| |
| 2007-04-20 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-opc.c (DCM, DGM, TE, RMC, R, SP, S): Correct shift. |
| (Z2_MASK): Define. |
| (powerpc_opcodes): Use Z2_MASK in all insns taking RMC operand. |
| |
| 2007-04-20 Richard Earnshaw <rearnsha@arm.com> |
| |
| * arm-dis.c (print_insn): Only look for a mapping symbol in the section |
| being disassembled. |
| |
| 2007-04-19 Alan Modra <amodra@bigpond.net.au> |
| |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2007-04-19 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-opc.c (powerpc_opcodes): Add cctpl, cctpm, cctph, db8cyc, |
| db10cyc, db12cyc, db16cyc. |
| |
| 2007-04-19 Nathan Froyd <froydnj@codesourcery.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Recognize three-operand tlbsxe. |
| |
| 2007-04-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (CRC32_Fixup): New. |
| (PREGRP85, PREGRP86, PREGRP87, PREGRP88, PREGRP89, PREGRP90, |
| PREGRP91): New. |
| (threebyte_0x38_uses_DATA_prefix): Updated for SSE4.2. |
| (threebyte_0x3a_uses_DATA_prefix): Likewise. |
| (prefix_user_table): Add PREGRP85, PREGRP86, PREGRP87, |
| PREGRP88, PREGRP89, PREGRP90 and PREGRP91. |
| (three_byte_table): Likewise. |
| |
| * i386-opc.c (i386_optab): Add SSE4.2 opcodes. |
| |
| * i386-opc.h (CpuSSE4_2): New. |
| (CpuSSE4): Likewise. |
| (CpuUnknownFlags): Add CpuSSE4_2. |
| |
| 2007-04-18 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (XMM_Fixup): New. |
| (Edqb): New. |
| (Edqd): New. |
| (XMM0): New. |
| (dqb_mode): New. |
| (dqd_mode): New. |
| (PREGRP39 ... PREGRP85): New. |
| (threebyte_0x38_uses_DATA_prefix): Updated for SSE4. |
| (threebyte_0x3a_uses_DATA_prefix): Likewise. |
| (prefix_user_table): Add PREGRP39 ... PREGRP85. |
| (three_byte_table): Likewise. |
| (putop): Handle 'K'. |
| (intel_operand_size): Handle dqb_mode, dqd_mode): |
| (OP_E): Likewise. |
| (OP_G): Likewise. |
| |
| * i386-opc.c (i386_optab): Add SSE4.1 opcodes. |
| |
| * i386-opc.h (CpuSSE4_1): New. |
| (CpuUnknownFlags): Add CpuSSE4_1. |
| (regKludge): Update comment. |
| |
| 2007-04-18 Matthias Klose <doko@ubuntu.com> |
| |
| * Makefile.am (libopcodes_la_LDFLAGS): Use bfd soversion. |
| * Makefile.in: Regenerate. |
| |
| 2007-04-14 Steve Ellcey <sje@cup.hp.com> |
| |
| * Makefile.am: Add ACLOCAL_AMFLAGS. |
| * Makefile.in: Regenerate. |
| |
| 2007-04-13 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c: Remove trailing white spaces. |
| * i386-opc.c: Likewise. |
| * i386-opc.h: Likewise. |
| |
| 2007-04-11 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/4333 |
| * i386-dis.c (GRP1a): New. |
| (GRP1b ... GRPPADLCK2): Update index. |
| (dis386): Use GRP1a for entry 0x8f. |
| (mod, rm, reg): Removed. Replaced by ... |
| (modrm): This. |
| (grps): Add GRP1a. |
| |
| 2007-04-09 Kazu Hirata <kazu@codesourcery.com> |
| |
| * m68k-dis.c (print_insn_m68k): Restore info->fprintf_func and |
| info->print_address_func if longjmp is called. |
| |
| 2007-03-29 DJ Delorie <dj@redhat.com> |
| |
| * m32c-desc.c: Regenerate. |
| * m32c-dis.c: Regenerate. |
| * m32c-opc.c: Regenerate. |
| |
| 2007-03-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.c (i386_optab): Change InvMem to RegMem for mov and |
| movq. Remove InvMem from sldt, smsw and str. |
| |
| * i386-opc.h (InvMem): Renamed to ... |
| (RegMem): Update comments. |
| (AnyMem): Remove InvMem. |
| |
| 2007-03-27 Paul Brook <paul@codesourcery.com> |
| |
| * arm-dis.c (thumb_opcodes): Add entry for undefined insns (0xbe??). |
| |
| 2007-03-24 Paul Brook <paul@codesourcery.com> |
| |
| * arm-dis.c (coprocessor_opcodes): Remove superfluous 0x. |
| (print_insn_coprocessor): Handle %<bitfield>x. |
| |
| 2007-03-24 Paul Brook <paul@codesourcery.com> |
| Mark Shinwell <shinwell@codesourcery.com> |
| |
| * arm-dis.c (arm_opcodes): Print SRS base register. |
| |
| 2007-03-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (prefix_name): Replace rex64XYZ with rex.WRXB. |
| |
| * i386-opc.c (i386_optab): Add rex.wrxb. |
| |
| 2007-03-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (REX_MODE64): Remove definition. |
| (REX_EXTX): Likewise. |
| (REX_EXTY): Likewise. |
| (REX_EXTZ): Likewise. |
| (USED_REX): Use REX_OPCODE instead of 0x40. |
| Replace REX_MODE64, REX_EXTX, REX_EXTY and REX_EXTZ with REX_W, |
| REX_R, REX_X and REX_B respectively. |
| |
| 2007-03-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/4218 |
| * i386-dis.c (PREGRP38): New. |
| (dis386): Use PREGRP38 for 0x90. |
| (prefix_user_table): Add PREGRP38. |
| (print_insn): Set uses_REPZ_prefix to 1 for pause. |
| (NOP_Fixup1): Properly handle REX bits. |
| (NOP_Fixup2): Likewise. |
| |
| * i386-opc.c (i386_optab): Allow %eax with xchg in 64bit. |
| Allow register with nop. |
| |
| 2007-03-20 DJ Delorie <dj@redhat.com> |
| |
| * m32c-asm.c: Regenerate. |
| * m32c-desc.c: Regenerate. |
| * m32c-desc.h: Regenerate. |
| * m32c-dis.h: Regenerate. |
| * m32c-ibld.c: Regenerate. |
| * m32c-opc.c: Regenerate. |
| * m32c-opc.h: Regenerate. |
| |
| 2007-03-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.c: Include "libiberty.h". |
| (i386_regtab): Remove the last entry. |
| (i386_regtab_size): New. |
| (i386_float_regtab_size): Likewise. |
| |
| * i386-opc.h (i386_regtab_size): New. |
| (i386_float_regtab_size): Likewise. |
| |
| 2007-03-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am (CFILES): Add i386-opc.c. |
| (ALL_MACHINES): Add i386-opc.lo. |
| Run "make dep-am". |
| * Makefile.in: Regenerated. |
| |
| * configure.in: Add i386-opc.lo for bfd_i386_arch. |
| * configure: Regenerated. |
| |
| * i386-dis.c: Include "opcode/i386.h". |
| (MAXLEN): Renamed to MAX_MNEM_SIZE. Remove definition. |
| (FWAIT_OPCODE): Remove definition. |
| (UNIXWARE_COMPAT): Renamed to SYSV386_COMPAT. Remove definition. |
| (MAX_OPERANDS): Remove definition. |
| |
| * i386-opc.c: New file. |
| * i386-opc.h: Likewise. |
| |
| 2007-03-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.in: Regenerated. |
| |
| 2007-03-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OP_Rd): Renamed to ... |
| (OP_R): This. |
| (Rd): Updated. |
| (Rm): Likewise. |
| |
| 2007-03-08 Alan Modra <amodra@bigpond.net.au> |
| |
| * fr30-asm.c: Regenerate. |
| * frv-asm.c: Regenerate. |
| * ip2k-asm.c: Regenerate. |
| * iq2000-asm.c: Regenerate. |
| * m32c-asm.c: Regenerate. |
| * m32r-asm.c: Regenerate. |
| * m32r-dis.c: Regenerate. |
| * mt-asm.c: Regenerate. |
| * mt-ibld.c: Regenerate. |
| * mt-opc.c: Regenerate. |
| * openrisc-asm.c: Regenerate. |
| * xc16x-asm.c: Regenerate. |
| * xstormy16-asm.c: Regenerate. |
| |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com> |
| |
| * opcodes/s390-opc.c (INSTR_RRE_FR, INSTR_RRF_F0FF2, INSTR_RRF_F0FR, |
| INSTR_RRF_UUFF, INSTR_RRF_0UFF, INSTR_RRF_FFFU, INSTR_RRR_F0FF): New |
| instruction formats added. |
| (MASK_RRE_FR, MASK_RRF_F0FF2, MASK_RRF_F0FR, MASK_RRF_UUFF, |
| MASK_RRF_0UFF, MASK_RRF_FFFU, MASK_RRR_F0FF): New instruction format |
| masks added. |
| * opcodes/s390-opc.txt (lpdfr - tgxt): Decimal floating point |
| instructions added. |
| * opcodes/s390-mkopc.c (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added. |
| (main): z9-ec cpu type option added. |
| * include/opcode/s390.h (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added. |
| |
| 2007-02-22 DJ Delorie <dj@redhat.com> |
| |
| * s390-opc.c (INSTR_SS_L2RDRD): New. |
| (MASK_SS_L2RDRD): New. |
| * s390-opc.txt (pka): Use it. |
| |
| 2007-02-20 Thiemo Seufer <ths@mips.com> |
| Chao-Ying Fu <fu@mips.com> |
| |
| * mips-dis.c (mips_arch_choices): Add DSP R2 support. |
| (print_insn_args): Add support for balign instruction. |
| * mips-opc.c (D33): New shortcut for DSP R2 instructions. |
| (mips_builtin_opcodes): Add DSP R2 instructions. |
| |
| 2007-02-19 Andreas Krebbel <krebbel1@de.ibm.com> |
| |
| * s390-opc.c (INSTR_RRF_U0FR, MASK_RRF_U0FR): Removed. |
| (INSTR_RRF_U0RF, MASK_RRF_U0RF): Added. |
| * s390-opc.txt (cfxbr, cfdbr, cfebr, cgebr, cgdbr, cgxbr, cger, cgdr, |
| cgxr, cfxr, cfdr, cfer): Instruction type set to INSTR_RRF_U0RF. |
| |
| 2007-02-19 Andreas Krebbel <krebbel1@de.ibm.com> |
| |
| * s390-opc.txt ("efpc", "sfpc"): Set to RRE_RR_OPT instruction type. |
| * s390-opc.c (s390_operands): Add RO_28 as optional gpr. |
| (INSTR_RRE_RR_OPT, MASK_RRE_RR_OPT): New instruction type for efpc |
| and sfpc. |
| |
| 2007-02-16 Nick Clifton <nickc@redhat.com> |
| |
| PR binutils/4045 |
| * avr-dis.c (comment_start): New variable, contains the prefix to |
| use when printing addresses in comments. |
| (print_insn_avr): Set comment_start to an empty space if there is |
| no symbol table available as the generic address printing code |
| will prefix the numeric value of the address with 0x. |
| |
| 2007-02-13 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c: Updated to use an array of MAX_OPERANDS operands |
| in struct dis386. |
| |
| 2007-02-05 Dave Brolley <brolley@redhat.com> |
| Richard Sandiford <rsandifo@redhat.com> |
| DJ Delorie <dj@redhat.com> |
| Graydon Hoare <graydon@redhat.com> |
| Frank Ch. Eigler <fche@redhat.com> |
| Ben Elliston <bje@redhat.com> |
| |
| * Makefile.am (HFILES): Add mep-desc.h mep-opc.h. |
| (CFILES): Add mep-*.c |
| (ALL_MACHINES): Add mep-*.lo. |
| (CLEANFILES): Add stamp-mep. |
| (CGEN_CPUS): Add mep. |
| (MEP_DEPS): New variable. |
| (mep-*): New targets. |
| * configure.in: Handle bfd_mep_arch. |
| * disassemble.c (ARCH_mep): New macro. |
| (disassembler): Handle bfd_arch_mep. |
| (disassemble_init_for_target): Likewise. |
| * mep-*: New files for Toshiba Media Processor (MeP). |
| * Makefile.in: Regenerated. |
| * configure: Regenerated. |
| |
| 2007-02-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OP_J): Undo the last change. Properly handle 64K |
| wrap around within the same segment in 16bit mode. |
| |
| 2007-02-02 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OP_J): Mask to 16bit only if there is a data16 |
| prefix. |
| |
| 2007-02-02 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * avr-dis.c (avr_operand): Correct PR number in comment. |
| |
| 2007-02-02 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * disassemble.c (disassembler_usage): Call |
| print_i386_disassembler_options for i386 disassembler. |
| |
| * i386-dis.c (print_i386_disassembler_options): New. |
| (print_insn): Support the new addr64 option. |
| |
| 2007-02-02 Hiroki Kaminaga <kaminaga@sm.sony.co.jp> |
| |
| * ppc-dis.c (powerpc_dialect): Handle ppc440. |
| * ppc-dis.c (print_ppc_disassembler_options): Note the -M440 can |
| be used. |
| |
| 2007-02-02 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-opc.c (insert_bdm): -Many comment. |
| (valid_bo): Add "extract" param. Accept both powerpc and power4 |
| BO fields when disassembling with -Many. |
| (insert_bo, extract_bo, insert_boe, extract_boe): Adjust valid_bo call. |
| |
| 2007-01-08 Kazu Hirata <kazu@codesourcery.com> |
| |
| * m68k-opc.c (m68k_opcodes): Replace cpu32 with |
| cpu32 | fido_a except on tbl instructions. |
| |
| 2007-01-04 Paul Brook <paul@codesourcery.com> |
| |
| * arm-dis.c (arm_opcodes): Fix cpsie and cpsid entries. |
| |
| 2007-01-04 Andreas Schwab <schwab@suse.de> |
| |
| * m68k-opc.c: Fix encoding of signed bit in the cpu32 tbls insns. |
| |
| 2007-01-04 Julian Brown <julian@codesourcery.com> |
| |
| * arm-dis.c (neon_opcode): Fix disassembly for vshl, vqshl, vrshl, |
| vqrshl instructions. |
| |
| For older changes see ChangeLog-2006 |
| |
| Copyright (C) 2007 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
