| Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-opc.c: Add FP_D to s.d instruction flags. |
| |
| Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| |
| * m68k-opc.c (halt, pulse): Enable them on the 68060. |
| |
| Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit |
| PC relative offset forms before the 15 bit forms. An assembler command |
| line option now chooses the default. |
| |
| Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-opc.c (d30v_opcode_table): Set new flags bits |
| FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions. |
| |
| 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com> |
| |
| * configure: Only build libopcodes shared if --enable-shared's value |
| was `yes', or was set to `*opcodes*'. |
| * aclocal.m4: Likewise. |
| * NOTE: this really needs to be fixed in libtool/libtool.m4, the |
| original source of this bit of code. It's not clear what the best fix |
| would be, though. |
| |
| Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change. |
| (tic80_opcodes): Reorder table entries to put the 32 bit PC relative |
| offset forms before the 15 bit forms, to default to the long forms. |
| |
| Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com> |
| |
| * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid. |
| |
| Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * arm-dis.c (print_insn_little_arm): Prevent examination of stored |
| symbol if none is present. |
| (print_insn_big_arm): Prevent examination of stored symbol if |
| none is present. |
| |
| Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com> |
| |
| * d10v-opc.c (d10v_opcodes): Correct entry for RTE. |
| |
| Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * disassemble.c: Remove disasm_symaddr() function. |
| |
| * arm-dis.c: Use info->symbol instead of info->flags to determine |
| if disassmbly should be in Thumb or Arm mode. |
| |
| Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * arm-dis.c: Add support for disassembling Thumb opcodes. |
| (print_insn_thumb): New function. |
| |
| * disassemble.c (disasm_symaddr): New function. |
| |
| * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly. |
| (thumb_opcodes): Table of Thumb opcodes. |
| |
| Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| |
| * m68k-opc.c (btst): Change Dd@s to Dd;b. |
| |
| * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q', |
| and 'v' as operand types. |
| |
| Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c: Add argument for lpstop. From Olivier Carmona |
| <olivier.carmona@di.epfl.ch>. |
| * m68k-dis.c (print_insn_m68k): Handle special case of lpstop, |
| which has a two word opcode with a one word argument. |
| |
| Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is |
| unsigned, not signed. |
| (d30v_format_table): Add SHORT_CMPU cases for cmpu. |
| |
| Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk> |
| |
| * d10v-dis.c (print_operand): |
| Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG. |
| |
| Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk> |
| |
| * d10v-opc.c (OPERAND_FLAG): Split into: |
| (OPERAND_FFLAG, OPERAND_CFLAG) . |
| (FSRC): Split into: |
| (FFSRC, CFSRC). |
| |
| Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips-opc.c: Move the INSN_MACRO ISA value to the membership |
| field for all INSN_MACRO's. |
| * mips16-opc.c: same |
| |
| Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips-opc.c (sync,cache): These are 3900 insns. |
| |
| Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk> |
| |
| sh-opc.h (sh_table): Remove ftst/nan. |
| |
| Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com> |
| |
| * mips-opc.c (ffc, ffs): Fix mask. |
| |
| Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m |
| control registers. |
| |
| Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com> |
| |
| * mips-opc.c: Fix bug in mask for "not" pseudo-instruction. |
| (WR_HILO, RD_HILO, MOD_HILO): New macros. |
| |
| Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com> |
| |
| * mips-opc.c: Fix bug in mask for "not" pseudo-instruction. |
| (WR_HILO, RD_HILO, MOD_HILO): New macros. |
| |
| Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-dis.c (disassemble): Replace // with /* ... */ |
| |
| Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com> |
| |
| * sparc-opc.c: Add wr & rd for v9a asr's. |
| * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's. |
| (v9a_asr_reg_names): New variable. |
| Patch from David Miller <davem@vger.rutgers.edu>. |
| |
| Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com> |
| |
| * sparc-opc.c (v9notv9a): New insn type. |
| (IMPDEP): Move to the end to not conflict with edge8 et al. |
| Patch from David Miller <davem@vger.rutgers.edu>. |
| |
| Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips-opc.c (bnezl,beqzl): Mark these as also tx39. |
| |
| Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1. |
| |
| Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-dis.c (disassemble): Use new symbol_at_address_func() field |
| of disassemble_info structure to determine if an overlay address |
| has a matching symbol in low memory. |
| |
| * dis-buf.c (generic_symbol_at_address): New (dummy) function for |
| new symbol_at_address_func field in disassemble_info structure. |
| |
| Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-opc.c (extract_d22): Use signed arithmatic. |
| |
| Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips-opc.c: Three op mult is not an ISA insn. |
| |
| Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips-opc.c: Fix formatting. |
| |
| Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather |
| than assuming that char is signed. Explicitly sign extend 16 bit |
| values, rather than assuming that short is 16 bits. |
| (OP_sI, OP_J, OP_DIR): Likewise. |
| |
| Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-dis.c (v850_sreg_names): Use symbolic names for higher |
| system registers. |
| |
| Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-opc.c: Fix typo in comment. |
| |
| * v850-dis.c (disassemble): Add test of processor type when |
| determining opcodes. |
| |
| Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Use a diversion to set enable_shared before the |
| arguments are parsed. |
| * configure: Rebuild. |
| |
| Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c (TBL1): Use ! rather than `. |
| * m68k-dis.c (print_insn_arg): Remove ` operand specifier. |
| |
| Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire. |
| |
| * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32. |
| |
| * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr |
| for mcf5200. |
| |
| * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL. |
| * aclocal.m4: Rebuild with new libtool. |
| * configure: Rebuild. |
| |
| Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2. |
| |
| Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr. |
| |
| Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-opc.c (v850_opcodes): Further rearrangements. |
| |
| Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com> |
| |
| * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change. |
| |
| Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-opc.c (v850_opcodes): Fields reordered to allow assembler |
| parser to work. |
| |
| Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret. |
| |
| Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-opc.c: Initialise processors field of v850_opcode structure. |
| |
| Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com> |
| |
| Merge changes from Martin Hunt: |
| |
| * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values. |
| |
| * d30v-opc.c (pre_defined_registers): Add control registers from 0-63. |
| (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix |
| rot2h, sra2h, and srl2h to use new SHORT_A5S format. |
| |
| * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes. |
| |
| * d30v-dis.c (print_insn): First operand of d*i (delayed |
| branch) instructions is relative. |
| |
| * d30v-opc.c (d30v_opcode_table): Change form for repeati. |
| (d30v_operand_table): Add IMM6S3 type. |
| (d30v_format_table): Change SHORT_D2. Add LONG_Db. |
| |
| * d30v-dis.c: Fix bug with ".s" and ".l" extensions |
| and cmp instructions. |
| |
| * d30v-opc.c: Correct entries for repeat*, and sat*. |
| Make IMM5 unsigned. Create IMM6U and IMM12S3U operand |
| types. Correct several formats. |
| |
| * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc. |
| |
| * d30v-opc.c (pre_defined_registers): Change control registers. |
| |
| * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and |
| SHORT_C2. Manual was incorrect. |
| |
| * d30v-dis.c (lookup_opcode): Return value now indicates |
| if an opcode has a short and a long form. Used for deciding |
| to append a ".s" or ".l". |
| (print_insn): Append a ".s" to an instruction if it is |
| the short form and ".l" if it is a long form. Do not append |
| anything if the instruction has only one possible size. |
| |
| * d30v-opc.c: Change mulx2h to require an even register. |
| New form: SHORT_A2; a SHORT_A form that needs an even |
| register as the first operand. |
| |
| * d30v-dis.c (print_insn_d30v): Fix problem where the last |
| instruction was not being disassembled if there were an odd |
| number of instructions. |
| |
| * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms. |
| |
| Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-dis.c (disassemble): Improved display of register lists. |
| |
| Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (sparc_opcodes): Fix assembler args to |
| fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s, |
| fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s, |
| fandnot1s, fandnot2s. |
| |
| Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq. |
| |
| Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * cgen-asm.c (cgen_parse_address): New argument resultp. |
| All callers updated. |
| * m32r-asm.c (parse_h_hi16): Right shift numbers by 16. |
| |
| Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200-dis.c (disassemble): PC relative instructions are |
| relative to the next instruction, not the current instruction. |
| |
| Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-dis.c (disassemble): Only signed extend values that are not |
| returned by extract functions. |
| Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag. |
| |
| Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-opc.c: Update comments. Remove use of |
| V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns. |
| |
| Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-opc.c (MOVHI): Immediate parameter is unsigned. |
| |
| Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com> |
| |
| * configure: Rebuilt with latest devo autoconf for NT support. |
| |
| Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-dis.c (disassemble): Use curly brace syntax for register |
| lists. |
| |
| * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases |
| where r0 is being used as a destination register. |
| |
| Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other. |
| |
| Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com> |
| |
| * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage. |
| |
| Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-opc.c (v850_opcodes[]): Remove use of flag field. |
| * v850-opc.c (v850_opcodes[]): Add support for reversed short load |
| opcodes.. |
| |
| Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * configure (cgen_files): Add support for v850e target. |
| * configure.in (cgen_files): Add support for v850e target. |
| |
| Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * configure (cgen_files): Add support for v850ea target. |
| * configure.in (cgen_files): Add support for v850ea target. |
| |
| Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure.in (bfd_arc_arch): Add. |
| * configure: Rebuild. |
| * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo. |
| * Makefile.in: Rebuild. |
| * arc-dis.c, arc-opc.c: New files. |
| * disassemble.c (ARCH_all): Define ARCH_arc. |
| (disassembler): Add ARC support. |
| |
| Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * v850-dis.c (disassemble): Add support for v850EA instructions. |
| |
| * v850-opc.c (insert_i5div, extract_i5div): New Functions. |
| (v850_opcodes): Add v850EA instructions. |
| |
| * v850-dis.c (disassemble): Add support for v850E instructions. |
| |
| * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16, |
| extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9, |
| insert_spe, extract_spe): New Functions. |
| (v850_opcodes): Add v850E instructions. |
| |
| * v850-opc.c: Reorganised and re-layed out to improve readability |
| and portability. |
| |
| Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure: Rebuild with autoconf 2.12.1. |
| |
| Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * aclocal.m4, configure: Rebuild with new automake patches. |
| |
| Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Set enable_shared before AM_PROG_LIBTOOL. |
| * acinclude.m4: Just include acinclude.m4 from BFD. |
| * aclocal.m4, configure: Rebuild. |
| |
| Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.am: New file, based on old Makefile.in. |
| * acconfig.h: New file. |
| * acinclude.m4: New file. |
| * stamp-h.in: New file. |
| * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL. |
| Removed shared library handling; now handled by libtool. Replace |
| AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE, |
| AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with |
| AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h |
| handling in AC_OUTPUT. |
| * dep-in.sed: Change .o to .lo. |
| * Makefile.in: Now built with automake. |
| * aclocal.m4: Now built with aclocal. |
| * config.in, configure: Rebuild. |
| |
| Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mips-opc.c: Fix typo/thinko in "eret" instruction. |
| |
| Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns. |
| Make array const. |
| * sparc-dis.c (sorted_opcodes): New static local. |
| (struct opcode_hash): `opcode' is pointer to const element. |
| (build_hash): First arg is now table of sorted pointers. |
| (print_insn_sparc): Sort opcodes by sorting table of pointers. |
| (compare_opcodes): Update. |
| |
| Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * cgen-opc.c: #include <ctype.h>. |
| (hash_keyword_name): New arg `case_sensitive_p'. Callers updated. |
| Handle case insensitive hashing. |
| (hash_keyword_value): Change type of `value' to unsigned int. |
| |
| Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mips-opc.c (mips_builtin_opcodes): If an insn uses single |
| precision FP, mark it as such. Likewise for double precision |
| FP. Mark ISA1 insns. Consolidate duplicate opcodes where |
| possible. |
| |
| Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com> |
| |
| * ppc-opc.c (extract_nsi): make unsigned expression signed before |
| negating it. |
| (UNUSED): remove one level of parens, so MSVC doesn't choke on |
| nesting depth when all the macros are expanded. |
| |
| Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * sparc-opc.c: The fcmp v9a instructions take an integer register |
| as a destination, not a floating point register. From Christian |
| Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>. |
| |
| Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@() |
| syntax. From Roman Hodek |
| <rnhodek@faui22c.informatik.uni-erlangen.de>. |
| |
| * i386-dis.c (twobyte_has_modrm): Fix pand. |
| |
| Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu> |
| |
| * i386-dis.c (dis386_twobyte): Fix pand and pandn. |
| |
| Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu> |
| |
| * arm-dis.c: Add prototypes for arm_decode_shift and |
| print_insn_arm. |
| |
| Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips-opc.c: Add r3900 insns. |
| |
| Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't |
| print delay slot instructions on the same line. When using a PC |
| relative load, add a comment with the value being loaded if it can |
| be obtained. |
| |
| Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au> |
| |
| * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl |
| to pushS/popS for segment regs and byte constant so that |
| pushw/popw printed when in 16 bit data mode. |
| |
| * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to |
| print cbtw, cwtd in 16 bit data mode. |
| * i386-dis.c (putop): extra case W to support above. |
| |
| * i386-dis.c (print_insn_x86): print addr32 prefix when given |
| address size prefix in 16 bit address mode. |
| |
| Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * sh-dis.c: Reindent. Rename local variable fprintf to |
| fprintf_fn. |
| |
| Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2. |
| |
| Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new |
| field membership. |
| * mips16-opc.c (mip16_opcodes): same. |
| |
| Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com> |
| |
| * m68k-opc.c (moveb): Change $d to %d. |
| |
| Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * i386-dis.c: (dis386_twobyte): Add MMX instructions. |
| (twobyte_has_modrm): Likewise. |
| (grps): Likewise. |
| (OP_MMX, OP_EM, OP_MS): New static functions. |
| |
| * i386-dis.c: Revert patch of April 4. The output now matches |
| what gcc generates. |
| |
| Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead |
| of $simm16. |
| |
| Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU. |
| |
| Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (install): Depend upon installdirs. |
| (installdirs): New target. |
| |
| Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| From Thomas Graichen <graichen@rzpd.de>: |
| * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub. |
| * configure: Rebuild. |
| |
| Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h. |
| Delete string{,s}.h support. |
| |
| Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * cgen-asm.c (cgen_parse_operand_fn): New global. |
| (cgen_parse_{{,un}signed_integer,address}): Update call to |
| cgen_parse_operand_fn. |
| (cgen_init_parse_operand): New function. |
| * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed |
| from cgen_asm_init_parse. |
| (m32r_cgen_assemble_insn): New operand `errmsg'. |
| Delete call to as_bad, return error message to caller. |
| (m32r_cgen_asm_hash_keywords): #if 0 out. |
| |
| Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| |
| * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register, |
| not data register. |
| [case 'J']: Fix typo in register name. |
| |
| Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Substitute SHLIB_LIBS. |
| * configure: Rebuild. |
| * Makefile.in (SHLIB_LIBS): New variable. |
| ($(SHLIB)): Use $(SHLIB_LIBS). |
| |
| Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation. |
| |
| * cgen-opc.c (hash_keyword_name): Improve algorithm. |
| |
| * disassemble.c (disassembler): Handle m32r. |
| |
| Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files. |
| * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files. |
| * Makefile.in (CFILES): Add them. |
| (ALL_MACHINES): Add them. |
| (dependencies): Regenerate. |
| * configure.in (cgen_files): New variable. |
| (bfd_m32r_arch): Add entry. |
| * configure: Regenerate. |
| |
| Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Correct file names for bfd_mn10[23]00_arch. |
| * configure: Rebuild. |
| |
| * Makefile.in: Rebuild dependencies. |
| |
| * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h". |
| |
| * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and |
| fdivp. |
| |
| Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Branched binutils 2.8. |
| |
| Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m10200-dis.c: Rename from mn10200-dis.c. |
| * m10200-opc.c: Rename from mn10200-opc.c. |
| * m10300-dis.c: Rename from mn10300-dis.c |
| * m10300-opc.c: Rename from mn10300-opc.c. |
| * Makefile.in: Update accordingly. |
| |
| * mips16-opc.c: Add mul and dmul macros. |
| |
| Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de> |
| |
| * makefile.vms: Update CFLAGS, add clean target. |
| |
| Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-opc.c: Add "wait". From Ralf Baechle |
| <ralf@gnu.ai.mit.edu>. |
| |
| * configure.in: Add stdlib.h to AC_CHECK_HEADERS list. |
| * configure, config.in: Rebuild. |
| * sysdep.h: Include <stdlib.h> if it exists. |
| * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include |
| <string.h>. |
| * Makefile.in: Rebuild dependencies. |
| |
| Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From |
| Andrew Bray <andy@madhouse.demon.co.uk>. |
| |
| * mips-opc.c: Add cast when setting mips_opcodes. |
| |
| Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * v850-dis.c (disassemble): Fix sign extension problem. |
| * v850-opc.c (extract_d*): Fix sign extension problems to make |
| disassembly calculate branch offsets correctly. |
| |
| Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s. |
| |
| * mips-opc.c: Add dctr and dctw. |
| |
| Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d30v-dis.c (print_insn): Change the way signed constants |
| are displayed. |
| |
| Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (BFD_H): New variable. |
| (HFILES): New variable. |
| (CFILES): Add all C files. |
| (.dep, .dep1, dep.sed, dep, dep-in): New targets. |
| Delete old dependencies, and build new ones. |
| * dep-in.sed: New file. |
| |
| Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be> |
| |
| * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}. |
| |
| Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200-opc.c: Change "trap" to "syscall". |
| * mn10300-opc.c: Add new "syscall" instruction. |
| |
| Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and |
| mulul insns on the coldfire. |
| |
| Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * arm-dis.c (print_insn_arm): Don't print instruction bytes. |
| (print_insn_big_arm): Set bytes_per_chunk and display_endian. |
| (print_insn_little_arm): Likewise. |
| |
| Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| Based on patches from H.J. Lu <hjl@lucon.org>: |
| * i386-dis.c (fetch_data): Add prototype. |
| * m68k-dis.c (fetch_data): Add prototype. |
| (dummy_print_address): Add prototype. Make static. |
| * ppc-opc.c (valid_bo): Add prototype. |
| * sparc-dis.c (build_hash_table): Add prototype. |
| (is_delayed_branch, compute_arch_mask): Add prototypes. |
| (print_insn_sparc): Make several local variables const. |
| (compare_opcodes): Change arguments to const PTR. Add prototype. |
| * sparc-opc.c (arg): Change name field to be const. |
| (lookup_name, lookup_value): Add prototypes. Change table and |
| name parameters to be const. |
| (sparc_encode_asi): Change name parameter to be const. |
| (sparc_encode_membar, sparc_encode_prefetch): Likewise. |
| (sparc_encode_sparclet_cpreg): Likewise. |
| (sparc_decode_asi): Change return type to be const. |
| (sparc_decode_membar, sparc_decode_prefetch): Likewise. |
| (sparc_decode_sparclet_cpreg): Likewise. |
| |
| Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since |
| Solaris doesn't like the combined options, and the -f is |
| unnecessary. |
| (stamp-tshlink, install): Likewise. |
| |
| Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these |
| as relaxable. |
| |
| Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010. |
| |
| Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on |
| the mc68000. |
| |
| Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be> |
| |
| * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction. |
| |
| Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8. |
| |
| Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * tic80-opc.c (tic80_predefined_symbols): Define r25 properly. |
| |
| Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| |
| * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use |
| floatformat_to_double to make portable. |
| (print_insn_arg): Use NEXTEXTEND macro when extracting extended |
| precision float. |
| |
| Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com> |
| |
| * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes, |
| and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes. |
| |
| Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to |
| d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt. |
| |
| Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (LSI_SCALED): Renamed from this ... |
| (OFF_SL_BR_SCALED): ... to this, and added the flag |
| TIC80_OPERAND_BASEREL to the flags word. |
| (tic80_opcodes): Replace all occurances of LSI_SCALED with |
| OFF_SL_BR_SCALED. |
| |
| Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com> |
| |
| * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3. |
| Change mips_opcodes from const array to a pointer, |
| and change bfd_mips_num_opcodes from const int to int, |
| so that we can increase the size of the mips opcodes table |
| dynamically. |
| |
| Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (tic80_predefined_symbols): Revert change to |
| store BITNUM values in the table in one's complement form |
| to match behavior when assembler is given a raw numeric |
| value for a BITNUM operand. |
| * tic80-dis.c (print_operand_bitnum): Ditto. |
| |
| Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d30v-opc.c: Removed references to FLAG_X. |
| |
| Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in: Add dependencies on ../bfd/bfd.h as required. |
| |
| Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * Makefile.in: Added d30v object files. |
| * configure: (bfd_d30v_arch) Rebuilt. |
| * configure.in: (bfd_d30v_arch) Added new case. |
| * d30v-dis.c: New file. |
| * d30v-opc.c: New file. |
| * disassemble.c (disassembler) Add entry for d30v. |
| |
| Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (tic80_predefined_symbols): Add symbolic |
| representations for the floating point BITNUM values. |
| |
| Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values |
| in the table in one's complement form, as they appear in the |
| actual instruction. |
| (tic80_symbol_to_value): Use macros to access predefined |
| symbol fields. |
| (tic80_value_to_symbol): Ditto. |
| (tic80_next_predefined_symbol): New function. |
| * tic80-dis.c (print_operand_bitnum): Remove code that did |
| one's complement for BITNUM values. |
| |
| Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de> |
| |
| * makefile.vms: Remove 8 bit characters. Update to latest |
| gcc release. |
| |
| Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be> |
| |
| * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction. |
| |
| Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200-opc.c (IMM16_PCREL): This is a signed operand. |
| (IMM24_PCREL): Likewise. |
| |
| Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base |
| address for an extended PC relative instruction that is not a |
| branch. |
| |
| Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| |
| * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and |
| bytes_per_line. |
| |
| Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'. |
| (tic80_opcodes): Sort entries so that long immediate forms |
| come after short immediate forms, making it easier for |
| assembler to select the right one for a given operand. |
| |
| Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and |
| display_endian. |
| (print_insn_mips16): Likewise. |
| |
| Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (tic80_symbol_to_value): Changed to accept |
| a symbol class that restricts translation to just that |
| class (general register, condition code, etc). |
| |
| Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E, |
| and REG_DEST_E for register operands that have to be |
| an even numbered register. Add REG_FPA for operands that |
| are one of the floating point accumulator registers. |
| Add TIC80_OPERAND_MASK to flags for ENDMASK operand. |
| (tic80_opcodes): Change entries that need even numbered |
| register operands to use the new operand table entries. |
| Add "or" entries that are identical to "or.tt" entries. |
| |
| Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips16-opc.c: Add new cases of exit instruction for |
| disassembler. |
| * mips-dis.c (print_mips16_insn_arg): Display floating point |
| registers in operands of exit instruction. Print `$' before |
| register names in operands of entry and exit instructions. |
| |
| Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (tic80_predefined_symbols): Table of name/value |
| pairs for all predefined symbols recognized by the assembler. |
| Also used by the disassembling routines. |
| (tic80_symbol_to_value): New function. |
| (tic80_value_to_symbol): New function. |
| * tic80-dis.c (print_operand_control_register, |
| print_operand_condition_code, print_operand_bitnum): |
| Remove private tables and use tic80_value_to_symbol function. |
| |
| Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-dis.c (print_operand): Change address printing |
| to correctly handle PC wrapping. Fixes PR11490. |
| |
| Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative |
| branches relaxable. |
| |
| Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-dis.c (print_insn_mips16): Set insn_info information. |
| (print_mips16_insn_arg): Likewise. |
| |
| * mips-dis.c (print_insn_mips16): Better handling of an extend |
| opcode followed by an instruction which can not be extended. |
| |
| Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): Changed operand specifier for the |
| coldfire moveb instruction to not allow an address register as |
| destination. Although the documentation does not indicate that |
| this is invalid, experiments uncovered unexpected behavior. |
| Added a comment explaining the situation. Thanks to Andreas |
| Schwab for pointing this out to me. |
| |
| Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (tic80_opcodes): Expand comment to note that the |
| entries are presorted so that entries with the same mnemonic are |
| adjacent to each other in the table. Sort the entries for each |
| instruction so that this is true. |
| |
| Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| |
| * m68k-dis.c: Include <libiberty.h>. |
| (print_insn_m68k): Sort the opcode table on the most significant |
| nibble of the opcode. |
| |
| Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd", |
| "vsub", "vst", "xnor", and "xor" instructions. |
| (V_a1): Renamed from V_a, msb of accumulator reg number. |
| (V_a0): Add macro, lsb of accumulator reg number. |
| |
| Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-dis.c (print_insn_tic80): Broke excessively long |
| function up into several smaller ones and arranged for |
| the instruction printing function to be callable recursively |
| to print vector instructions that have both a load and a |
| math instruction packed into a single opcode. |
| * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode |
| to explain why it comes after the other vector opcodes. |
| |
| Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire |
| move insns to handle immediate operands. |
| |
| Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| |
| * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil". |
| fix operand mask in the "moveml" entries for the coldfire. |
| |
| Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V): |
| New macros for building vector instruction opcodes. |
| (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and |
| FMT_LI, which were unused. The field is now a flags field. |
| Remove some opcodes that are possible, but illegal, such |
| as long immediate instructions with doubles for immediate |
| values. Add "vadd" and "vld" instructions. |
| |
| Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (tic80_operands): Reorder some table entries to make |
| the order more logical. Move the shift alias instructions ("rotl", |
| "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be |
| interspersed with the regular sr.x and sl.x instructions. Add |
| and test new instruction opcodes for "sl", "sli", "sr", "sri", "st", |
| "sub", "subu", "swcr", and "trap". |
| |
| Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS. |
| (OFF_SL_PC): Renamed from OFF_SL. |
| (OFF_SS_BR): New operand type for base relative operand. |
| (OFF_SL_BR): New operand type for base relative operand. |
| (REG_BASE): New operand type for base register operand. |
| (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp", |
| "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr", |
| "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr" |
| instructions. |
| * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width |
| 10 char field, padded with spaces on rhs, rather than a string |
| followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather |
| than old TIC80_OPERAND_RELATIVE. Add support for new |
| TIC80_OPERAND_BASEREL flag bit. |
| |
| Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-dis.c (print_insn_tic80): Print floating point operands |
| as floats. |
| * tic80-opc.c (SPFI): Add single precision floating point |
| immediate operand type. |
| (ROTATE): Add rotate operand type for shifts. |
| (ENDMASK): Add for shifts. |
| (n): Macro for the 'n' bit. |
| (i): Macro for the 'i' bit. |
| (PD): Macro for the 'PD' field. |
| (P2): Macro for the 'P2' field. |
| (P1): Macro for the 'P1' field. |
| (tic80_opcodes): Add entries for "exts", "extu", "fadd", |
| "fcmp", and "fdiv". |
| |
| Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200-dis.c (disassemble): Mask off unwanted bits after |
| adding in current address for pc-relative operands. |
| |
| Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit. |
| (print_insn_tic80): If R_SCALED then print ":s" modifier for operand. |
| * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names |
| changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively. |
| (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI, |
| REG_BASE_M_SI, REG_BASE_M_LI respectively. |
| (REG_SCALED, LSI_SCALED): New operand types. |
| (E): New macro for 'E' bit at bit 27. |
| (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap |
| opcodes, including the various size flavors (b,h,w,d) for |
| the direct load and store instructions. |
| |
| Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit |
| in an instruction. |
| * tic80-dis.c (print_insn_tic80): Change comma and paren handling. |
| Use M_SI and M_LI macros to check for ":m" modifier for GPR operands. |
| * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands. |
| (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers. |
| (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode |
| masks with "MASK_* & ~M_*" to get the M bit reset. |
| (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef. |
| |
| Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com> |
| |
| * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE |
| correctly. Add support for printing TIC80_OPERAND_BITNUM and |
| TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic |
| form. |
| * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM, |
| CC, SICR, and LICR table entries. |
| (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz", |
| "bcnd", and "brcr" opcodes. |
| |
| Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com> |
| |
| * ppc-opc.c (powerpc_operands): Make comment match the |
| actual fields (no shift field). |
| * sparc-opc.c (sparc_opcodes): Document why this cannot be "const". |
| * tic80-dis.c (print_insn_tic80): Replace abort stub with a |
| partial implementation, work in progress. |
| * tic80-opc.c (tic80_operands): Begin construction operands table. |
| (tic80_opcodes): Continue populating opcodes table and start |
| filling in the operand indices. |
| (tic80_num_opcodes): Add this. |
| |
| Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c: Add #B case for moveq. |
| |
| Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-dis.c (disassemble): Make sure all variables are initialized |
| before they are used. |
| |
| Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-opc.c (v850_opcodes): Put curly-braces around operands |
| for "breakpoint" instruction. |
| |
| Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE. |
| (dep): Use ALL_CFLAGS rather than CFLAGS. |
| |
| Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY |
| flag. |
| |
| Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency. |
| (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in. |
| |
| Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips16-opc.c: Add "abs". |
| |
| Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o. |
| * disassemble.c (ARCH_tic80): Define if ARCH_all is defined. |
| (disassembler): Add bfd_arch_tic80 support to set disassemble |
| to print_insn_tic80. |
| * tic80-dis.c (print_insn_tic80): Add stub. |
| |
| Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com> |
| |
| * configure.in (arch in $selarchs): Add bfd_tic80_arch entry. |
| * configure: Regenerate with autoconf. |
| * tic80-dis.c: Add file. |
| * tic80-opc.c: Add file. |
| |
| Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link. |
| |
| Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200-opc.c (mn10200_operands): Add SIMM16N. |
| (mn10200_opcodes): Use it for some logicals and btst insns. |
| Add "break" and "trap" instructions. |
| |
| * mn10300-opc.c (mn10300_opcodes): Add "break" instruction. |
| |
| * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)". |
| |
| Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-dis.c (print_mips16_insn_arg): The base address of a PC |
| relative load or add now depends upon whether the instruction is |
| in a delay slot. |
| |
| Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200-dis.c: Finish writing disassembler. |
| * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn". |
| Fix mask for "jmp (an)". |
| |
| * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently |
| handle endianness issues for mn10300. |
| |
| * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)". |
| |
| Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2 |
| instruction. Fix opcode field for "movb (imm24),dn". |
| |
| * mn10200-opc.c (mn10200_operands): Fix insertion position |
| for DI operand. |
| |
| Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200-opc.c: Create mn10200 opcode table. |
| * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready, |
| but moving along nicely. |
| |
| Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * Makefile.in (ALL_MACHINES): Add mips16-opc.o. |
| |
| Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): Revert change to use < and > |
| specifiers for fmovem* instructions. |
| |
| Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-dis.c (disassemble): Remove '$' register prefixing. |
| |
| Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips16-opc.c: Change opcode for entry/exit to avoid conflicting |
| with dsrl. |
| |
| Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c: Add some comments explaining the various |
| operands and such. |
| |
| * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings. |
| |
| Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * m68k-dis.c (print_insn_arg): Handle new < and > operand |
| specifiers. |
| |
| * m68k-opc.c (m68k_opcodes): Simplify table by using < and > |
| operand specifiers in fmovm* instructions. |
| |
| Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * ppc-opc.c (insert_li): Give an error if the offset has the two |
| least significant bits set. |
| |
| Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-dis.c (print_insn_mips16): Separate the instruction from |
| the arguments with a tab, not a space. |
| |
| Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-dis.c (disasemble): Finish conversion to '$' as |
| register prefix. |
| |
| * mn10300-opc.c (mn10300_opcodes): Fix mask field for |
| mov am,(imm32,sp). |
| |
| Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure: Rebuild with autoconf 2.12. |
| |
| Add support for mips16 (16 bit MIPS implementation): |
| * mips16-opc.c: New file. |
| * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h". |
| (mips16_reg_names): New static array. |
| (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or |
| after seeing a 16 bit symbol. |
| (print_insn_little_mips): Likewise. |
| (print_insn_mips16): New static function. |
| (print_mips16_insn_arg): New static function. |
| * mips-opc.c: Add jalx instruction. |
| * Makefile.in (mips16-opc.o): New target. |
| * configure.in: Use mips16-opc.o for bfd_mips_arch. |
| * configure: Rebuild. |
| |
| Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): Simplify table by using < and > |
| operand specifiers in *save, *restore and movem* instructions. |
| |
| * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for |
| the coldfire. |
| |
| * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use |
| register operands for immediate arithmetic, not, neg, negx, and |
| set according to condition instructions. |
| |
| * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage |
| specifier of the effective-address operand in immediate forms of |
| arithmetic instructions. The specifier for the immediate operand |
| notes how and where the constant will be stored. |
| |
| Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc" |
| opcode. |
| |
| * mn10300-dis.c (disassemble): Use '$' instead of '%' for |
| register prefix. |
| |
| * mn10300-dis.c (disassemble): Prefix registers with '%'. |
| |
| Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-dis.c (disassemble): Handle register lists. |
| |
| * mn10300-opc.c: Fix handling of register list operand for |
| "call", "ret", and "rets" instructions. |
| |
| * mn10300-dis.c (disassemble): Print PC-relative and memory |
| addresses symbolically if possible. |
| * mn10300-opc.c: Distinguish between absolute memory addresses, |
| pc-relative offsets & random immediates. |
| |
| * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte |
| in 7 byte insns. |
| (disassemble): Handle SPLIT and EXTENDED operands. |
| |
| Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-dis.c: Rough cut at printing some operands. |
| |
| * mn10300-dis.c: Start working on disassembler support. |
| * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns. |
| |
| * mn10300-opc.c (mn10300_operands): Add "REGS" for a register |
| list. |
| (mn10300_opcodes): Use REGS for register list in "movm" instructions. |
| |
| Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * d10v-opc.c (d10v_opcodes): Add3 sets the carry. |
| |
| Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (mn10300_opcodes): Demand parens around |
| register argument is calls and jmp instructions. |
| |
| Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and |
| getx operand. Fix opcode for mulqu imm,dn. |
| |
| Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (mn10300_operands): Hijack "bits" field |
| in MN10300_OPERAND_SPLIT operands for how many bits |
| appear in the basic insn word. Add IMM32_HIGH24, |
| IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8. |
| (mn10300_opcodes): Use new operands as needed. |
| |
| * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8 |
| for bset, bclr, btst instructions. |
| (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed. |
| |
| * mn10300-opc.c (mn10300_operands): Remove many redundant |
| operands. Update opcode table as appropriate. |
| (IMM32): Add MN10300_OPERAND_SPLIT flag. |
| (mn10300_opcodes): Fix single bit error in mov imm32,dn insn. |
| |
| Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2 |
| operands (for indexed load/stores). Fix bitpos for DI |
| operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the |
| few instructions that insert immediates/displacements in the |
| middle of the instruction. Add IMM8E for 8 bit immediate in |
| the extended part of an instruction. |
| (mn10300_operands): Use new opcodes as appropriate. |
| |
| Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-opc.c (d10v_opcodes): Declare the trap instruction |
| sequential so the assembler never parallelizes it with |
| other instructions. |
| |
| Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for |
| a data/address register that appears in register field 0 |
| and register field 1. |
| (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN |
| |
| Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu> |
| |
| * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for |
| standard disassembly. |
| |
| * alpha-opc.c (alpha_operands): Rearrange flags slot. |
| (alpha_opcodes): Add new BWX, CIX, and MAX instructions. |
| Recategorize PALcode instructions. |
| |
| Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-opc.c (v850_opcodes): Add relaxing "jbr". |
| |
| Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-dis.c (_print_insn_mips): Don't print a trailing tab if |
| there are no operand types. |
| |
| Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-opc.c (D9_RELAX): Renamed from D9, all references |
| changed. |
| (v850_operands): Make sure D22 immediately follows D9_RELAX. |
| |
| Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5. |
| |
| Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w |
| and sst.w instructions. |
| |
| * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for |
| "bCC"instructions). |
| |
| Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-dis.c (_print_insn_mips): Use a tab between the instruction |
| and the arguments. |
| |
| Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * ppc-opc.c (PPCPWR2): Define. |
| (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating |
| it. |
| |
| Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode |
| field for movhu instruction. |
| |
| * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands, |
| cast value to "long" not "signed long" to keep hpux10 |
| compiler quiet. |
| |
| Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field |
| for mov (abs16),DN. |
| |
| * mn10300-opc.c (FMT*): Remove definitions. |
| |
| * mn10300-opc.c (mn10300_opcodes): Fix destination register |
| for shift-by-register opcodes. |
| |
| * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM |
| into [AD][MN][01] for encoding the position of the register |
| in the opcode. |
| |
| Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions, |
| "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch". |
| |
| Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (mn10300_operands): Remove "REGS" operand. |
| Fix various typos. Add "PAREN" operand. |
| (MEM, MEM2): Define. |
| (mn10300_opcodes): Surround all memory addresses with "PAREN" |
| operands. Fix several typos. |
| |
| * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's |
| changes. |
| |
| Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10300-opc.c (FMT_XX): Renumber starting at one. |
| (mn10300_operands): Rough cut. Enough to parse "mov" instructions |
| at this time. |
| (mn10300_opcodes): Break opcode format out into its own field. |
| Update many operand fields to deal with signed vs unsigned |
| issues. Fix one or two typos in the "mov" instruction |
| opcode, mask and/or operand fields. |
| |
| Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| |
| * m68k-opc.c (plusha): Prefer encoding for m68040up, in case |
| m68851 wasn't reset. |
| |
| Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for |
| all opcodes. Very rough cut at operands for all opcodes. |
| |
| * mn10300-opc.c (mn10300_opcodes): Start fleshing out the |
| opcode table. |
| |
| Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10200-opc.c, mn10300-opc.c: New files. |
| * mn10200-dis.c, mn10300-dis.c: New files. |
| * mn10x00-opc.c, mn10x00-dis.c: Deleted. |
| * disassemble.c: Break mn10x00 support into 10200 and 10300 |
| support. |
| * configure.in: Likewise. |
| * configure: Rebuilt. |
| |
| Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) |
| |
| * Makefile.in (MOSTLYCLEAN): Move config.log to distclean. |
| |
| Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita |
| MN10x00 processors. |
| * disassemble.c (ARCH_mn10x00): Define. |
| (disassembler): Handle bfd_arch_mn10x00. |
| * configure.in: Recognize bfd_mn10x00_arch. |
| * configure: Rebuilt. |
| |
| Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses |
| accordingly. Don't declare functions using op_rtn. |
| |
| Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * v850-dis.c (disassemble): Add memaddr argument. Re-arrange |
| params to be more standard. |
| * (disassemble): Print absolute addresses and symbolic names for |
| branch and jump targets. |
| * v850-opc.c (v850_operand): Add displacement flag to 9 and 22 |
| bit operands. |
| * (v850_opcodes): Add breakpoint insn. |
| |
| Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c: Move the fmovemx data register cases before the |
| other cases, so that they get recognized before the data register |
| does gets treated as a degenerate register list. |
| |
| Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-opc.c: Add a case for "div" and "divu" with two registers |
| and a destination of $0. |
| |
| Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com> |
| |
| * mips-dis.c (print_insn_arg): Add prototype. |
| (_print_insn_mips): Ditto. |
| |
| Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-dis.c (print_insn_arg): Print condition code registers as |
| $fccN. |
| |
| Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx. |
| |
| Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-dis.c (disassemble): Make static. Provide prototype. |
| |
| Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-opc.c (insert_d9, insert_d22): Fix boundary case |
| in range checks. |
| |
| Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-dis.c (disassemble): Handle insertion of ',', '[' and |
| ']' characters into the output stream. |
| * v850-opc.c (v850_opcodes: Remove size field from all opcodes. |
| Add "memop" field to all opcodes (for the disassembler). |
| Reorder opcodes so that "nop" comes before "mov" and "jr" |
| comes before "jarl". |
| |
| * v850-dis.c (print_insn_v850): Fix typo in last change. |
| |
| * v850-dis.c (print_insn_v850): Properly handle disassembling |
| a two byte insn at the end of a memory region when the memory |
| region's size is only two byte aligned. |
| |
| * v850-dis.c (v850_cc_names): Fix stupid thinkos. |
| |
| * v850-dis.c (v850_reg_names): Define. |
| (v850_sreg_names, v850_cc_names): Likewise. |
| (disassemble): Very rough cut at printing operands (unformatted). |
| |
| * v850-opc.c (BOP_MASK): Fix. |
| (v850_opcodes): Fix mask for jarl and jr. |
| |
| * v850-dis.c: New file. Skeleton for disassembler support. |
| * Makefile.in Remove v850 references, they're not needed here. |
| * configure.in: Add v850-dis.o when building v850 toolchains. |
| * configure: Rebuilt. |
| * disassemble.c (disassembler): Call v850 disassembler. |
| |
| * v850-opc.c (insert_d8_7, extract_d8_7): New functions. |
| (insert_d8_6, extract_d8_6): New functions. |
| (v850_operands): Rename D7S to D7; operand for D7 is unsigned. |
| Rename D8 to D8_7, use {insert,extract}_d8_7 routines. |
| Add D8_6. |
| (IF4A, IF4B): Use "D7" instead of "D7S". |
| (IF4C, IF4D): Use "D8_7" instead of "D8". |
| (IF4E, IF4F): New. Use "D8_6". |
| (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for |
| sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w. |
| |
| * v850-opc.c (insert_d16_15, extract_d16_15): New functions. |
| (v850_operands): Change D16 to D16_15, use special insert/extract |
| routines. New new D16 that uses the generic insert/extract code. |
| (IF7A, IF7B): Use D16_15. |
| (IF7C, IF7D): New. Use D16. |
| (v850_opcodes): Use IF7C and IF7D for ld.b and st.b. |
| |
| * v850-opc.c (insert_d9, insert_d22): Slightly improve error |
| message. Issue an error if the branch offset is odd. |
| |
| * v850-opc.c: Add notes about needing special insert/extract |
| for all the load/store insns, except "ld.b" and "st.b". |
| |
| * v850-opc.c (insert_d22, extract_d22): New functions. |
| (v850_operands): Use insert_d22 and extract_d22 for |
| D22 operands. |
| (insert_d9): Fix range check. |
| |
| Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com> |
| |
| * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag |
| and set bits field to D9 and D22 operands. |
| |
| Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-opc.c (v850_operands): Define SR2 operand. |
| (v850_opcodes): "ldsr" uses R1,SR2. |
| |
| * v850-opc.c (v850_opcodes): Fix opcode specs for |
| sld.w, sst.b, sst.h, sst.w, and nop. |
| |
| Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-opc.c (v850_opcodes): Add null opcode to mark the |
| end of the opcode table. |
| |
| Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-opc.c (pre_defined_registers): Added register pairs, |
| "r0-r1", "r2-r3", etc. |
| |
| Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-opc.c (v850_operands): Make I16 be a signed operand. |
| Create I16U for an unsigned 16bit mmediate operand. |
| (v850_opcodes): Use I16U for "ori", "andi" and "xori". |
| |
| * v850-opc.c (v850_operands): Define EP operand. |
| (IF4A, IF4B, IF4C, IF4D): Use EP. |
| |
| * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov" |
| with immediate operand, "movhi". Tweak "ldsr". |
| |
| * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw] |
| correct. Get sld.[bhw] and sst.[bhw] closer. |
| |
| * v850-opc.c (v850_operands): "not" is a two byte insn |
| |
| * v850-opc.c (v850_opcodes): Correct bit pattern for setf. |
| |
| * v850-opc.c (v850_operands): D16 inserts at offset 16! |
| |
| * v850-opc.c (two): Get order of words correct. |
| |
| * v850-opc.c (v850_operands): I16 inserts at offset 16! |
| |
| * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system |
| register source and destination operands. |
| (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr". |
| |
| * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix |
| same thinko in "trap" opcode. |
| |
| * v850-opc.c (v850_opcodes): Add initializer for size field |
| on all opcodes. |
| |
| * v850-opc.c (v850_operands): D6 -> DS7. References changed. |
| Add D8 for 8-bit unsigned field in short load/store insns. |
| (IF4A, IF4D): These both need two registers. |
| (IF4C, IF4D): Define. Use 8-bit unsigned field. |
| (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use |
| IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand |
| for "ldsr" and "stsr". |
| * v850-opc.c (v850_operands): 3-bit immediate for bit insns |
| is unsigned. |
| |
| * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and |
| short store word (sst.w). |
| |
| Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * v850-opc.c (v850_operands): Added insert and extract fields, |
| pointers to functions that handle unusual operand encodings. |
| |
| Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-opc.c (v850_opcodes): Enable "trap". |
| |
| * v850-opc.c (v850_opcodes): Fix order of displacement |
| and register for "set1", "clr1", "not1", and "tst1". |
| |
| Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * v850-opc.c (v850_operands): Add "B3" support. |
| (v850_opcodes): Fix and enable "set1", "clr1", "not1" |
| and "tst1". |
| |
| * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand. |
| |
| * v850-opc.c: Close unterminated comment. |
| |
| Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com> |
| |
| * v850-opc.c (v850_operands): Add flags field. |
| (v850_opcodes): add move opcodes. |
| |
| Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com> |
| |
| * Makefile.in (ALL_MACHINES): Add v850-opc.o. |
| * configure: (bfd_v850v_arch) Add new case. |
| * configure.in: (bfd_v850_arch) Add new case. |
| * v850-opc.c: New file. |
| |
| Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-dis.c (print_insn_sparc): Handle little endian sparcs. |
| |
| Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-opc.c: Add additional information to the opcode |
| table to help determinine which instructions can be done |
| in parallel. |
| |
| Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mpw-make.sed: Update editing of include pathnames to be |
| more general. |
| |
| Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * arm-opc.h: Added "bx" instruction definition. |
| |
| Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu> |
| |
| * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5. |
| |
| Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l. |
| |
| Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER. |
| |
| Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de> |
| |
| * makefile.vms: Update for alpha-opc changes. |
| |
| Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * i386-dis.c (print_insn_i386): Actually return the correct value. |
| (ONE, OP_ONE): #ifdef out; not used. |
| |
| Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions. |
| Changed subi operand type to treat 0 as 16. |
| |
| Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose |
| <rose@netcom.com>. |
| |
| Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk> |
| |
| * arm-opc.h: (arm_opcodes): Added halfword and sign-extension |
| memory transfer instructions. Add new format string entries %h and %s. |
| * arm-dis.c: (print_insn_arm): Provide decoding of the new |
| formats %h and %s. |
| |
| Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift. |
| (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S. |
| |
| Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * alpha-dis.c (print_insn_alpha_osf): Remove. |
| (print_insn_alpha_vms): Remove. |
| (print_insn_alpha): Make globally visible. Chose the register |
| names based on info->flavour. |
| * disassemble.c: Always return print_insn_alpha for the alpha. |
| |
| Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-dis.c (dis_long): Handle unknown opcodes. |
| |
| Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-opc.c: Changes to support signed and unsigned numbers. |
| All instructions with the same name that have long and short forms |
| now end in ".l" or ".s". Divs added. |
| * d10v-dis.c: Changes to support signed and unsigned numbers. |
| |
| Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * d10v-dis.c: Change all functions to use info->print_address_func. |
| |
| Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| |
| * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire |
| move ccr/sr insns more strict so that the disassembler only |
| selects them when the addressing mode is data register. |
| |
| Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| * d10v-opc.c (pre_defined_registers): Declare. |
| * d10v-dis.c (print_operand): Now uses pre_defined_registers |
| to pick a better name for the registers. |
| |
| Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix |
| operands for fexpand and fpmerge. From Christian Kuehnke |
| <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>. |
| |
| Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu> |
| |
| * alpha-dis.c (print_insn_alpha): No longer the user-visible |
| print routine. Take new regnames and cpumask arguments. |
| Kill the environment variable nonsense. |
| (print_insn_alpha_osf): New function. Do OSF/1 style regnames. |
| (print_insn_alpha_vms): New function. Do VMS style regnames. |
| * disassemble.c (disassembler): Test bfd flavour to pick |
| between OSF and VMS routines. Default to OSF. |
| |
| Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Call AC_SUBST (INSTALL_SHLIB). |
| * configure: Rebuild. |
| * Makefile.in (install): Use @INSTALL_SHLIB@. |
| |
| Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| |
| * configure: (bfd_d10v_arch) Add new case. |
| * configure.in: (bfd_d10v_arch) Add new case. |
| * d10v-dis.c: New file. |
| * d10v-opc.c: New file. |
| * disassemble.c (disassembler) Add entry for d10v. |
| |
| Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating |
| to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab. |
| |
| Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to |
| distinguish between variants of the instruction set. |
| * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to |
| distinguish between variants of the instruction set. |
| |
| Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * i386-dis.c (print_insn_i8086): New routine to disassemble using |
| the 8086 instruction set. |
| * i386-dis.c: General cleanups. Make most things static. Add |
| prototypes. Get rid of static variables aflags and dflags. Pass |
| them as args (to almost everything). |
| |
| Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns. |
| |
| * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l". |
| |
| * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two |
| if the next arg is marked with SRC_IN_DST. Gross. |
| |
| * h8300-dis.c (bfd_h8_disassemble): Print "exr" when |
| we're looking for and find EXR. |
| |
| * h8300-dis.c (bfd_h8_disassemble): We don't have a match |
| if we're looking for KBIT and we don't find it. |
| |
| * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits |
| for L_3 and L_2. |
| |
| * h8300-dis.c (bfd_h8_disassemble): Don't set plen for |
| 3bit immediate operands. |
| |
| Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Released binutils 2.7. |
| |
| * alpha-opc.c: Add new case of "mov". From Klaus Kaempf |
| <kkaempf@progis.ac-net.de>. |
| |
| Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * alpha-opc.c: Correct second case of "mov" to use OPRL. |
| |
| Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * sparc-dis.c (print_insn_sparclite): New routine to print |
| sparclite instructions. |
| |
| Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): Add coldfire support. |
| |
| Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS, |
| #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L |
| to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE. |
| |
| Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) |
| |
| * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir): |
| Use autoconf-set values. |
| (docdir, oldincludedir): Removed. |
| * configure.in (AC_PREREQ): autoconf 2.5 or higher. |
| |
| Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu> |
| |
| * alpha-opc.c: New file. |
| * alpha-opc.h: Remove. |
| * alpha-dis.c: Complete rewrite to use new opcode table. |
| * configure.in: For bfd_alpha_arch, use alpha-opc.o. |
| * configure: Rebuild with autoconf 2.10. |
| * Makefile.in (ALL_MACHINES): Add alpha-opc.o. |
| (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not |
| alpha-opc.h. |
| (alpha-opc.o): New target. |
| |
| Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * sparc-dis.c (print_insn_sparc): Remove unused local variable i. |
| Set imm_added_to_rs1 even if the source and destination register |
| are not the same. |
| |
| * sparc-opc.c: Add some two operand forms of the wr instruction. |
| |
| Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com> |
| |
| * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument |
| to just "mode". |
| |
| * disassemble.c (disassembler): Handle H8/S. |
| * h8300-dis.c (print_insn_h8300s): New function for H8/S. |
| |
| Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * sparc-opc.c: Add beq/teq as aliases for be/te. |
| |
| * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko |
| <sergei@msil.sps.mot.com>. |
| |
| Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de> |
| |
| * makefile.vms: New file. |
| |
| * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov. |
| |
| Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8, |
| regardless of plen. |
| |
| Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * i386-dis.c (OP_OFF): Call append_prefix. |
| |
| Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * ppc-opc.c (instruction encoding macros): Add explicit casts to |
| unsigned long to silence a warning from the Solaris PowerPC |
| compiler. |
| |
| Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions. |
| |
| Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com> |
| |
| * sparc-dis.c (X_IMM,X_SIMM): New macros. |
| (X_IMM13): Delete. |
| (print_insn_sparc): Merge cases i,I,j together. New cases X,Y. |
| * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants, |
| Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt, |
| cpush, cpusha, cpull sparclet insns. |
| |
| Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R. |
| |
| Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * sparc-opc.c: Set F_FBR on floating point branch instructions. |
| Set F_FLOAT on other floating point instructions. |
| |
| Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and |
| registers. |
| (powerpc_opcodes): Add 860/821 specific SPRs. |
| |
| Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Permit --enable-shared to specify a list of |
| directories. Set and substitute BFD_PICLIST. |
| * configure: Rebuild. |
| * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all |
| uses. Set to @BFD_PICLIST@. |
| |
| Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com) |
| |
| * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates, |
| not "abs", which may be needed for the absolute in something |
| like btst #0,@10:8. Print L_3 immediates separately from other |
| immediates. Change ABSMOV reference to ABS8MEM. |
| |
| Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc. |
| (current_arch_mask): New static global. |
| (compute_arch_mask): New static function. |
| (print_insn_sparc): Delete sparc_v9_p. New static local |
| current_mach. Resort opcode table if current_mach changes. |
| Generalize "insn not supported" test. |
| (compare_opcodes): Prefer supported opcodes to nonsupported ones. |
| Delete test for v9/!v9. |
| * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK. |
| (v6notlet): Define. |
| (brfc): Split into CBR and FBR for coprocessor/fp branches. |
| (brfcx): Renamed to FBRX. |
| (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard |
| coprocessor mnemonics are not supported on the sparclet). |
| (condf): Renamed to CONDF. |
| (SLCBCC2): Delete F_ALIAS flag. |
| |
| Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (sparc_opcodes): rd must be 0 for |
| mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX. |
| |
| Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (config.status): Depend upon BFD VERSION file, so |
| that the shared library version number is set correctly. |
| |
| Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From |
| Miles Bader <miles@gnu.ai.mit.edu>. |
| * configure: Rebuild. |
| |
| Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com> |
| |
| * z8kgen.c (internal, gas): Call xmalloc rather than unchecked |
| malloc. |
| |
| Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure: Rebuild with autoconf 2.8. |
| |
| Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com> |
| |
| * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'. |
| * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'. |
| |
| Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Don't set SHLIB or SHLINK to an empty string, |
| since they appear as targets in Makefile.in. |
| * configure: Rebuild. |
| |
| Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mpw-make.sed: Edit out shared library support bits. |
| |
| Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com> |
| |
| * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET. |
| (sparc_opcode_archs): Add MASK_V8 to sparclet entry. |
| (sparc_opcodes): Add sparclet insns. |
| (sparclet_cpreg_table): New static local. |
| (sparc_{encode,decode}_sparclet_cpreg): New functions. |
| * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs. |
| |
| Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au> |
| |
| * i386-dis.c (index16): New static variable. |
| (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the |
| other way around. |
| (OP_indirE): Return result of OP_E. |
| (OP_E): Check for 16 bit addressing mode, and disassemble |
| correctly. Optimised 32 bit case a little. Don't print |
| "(base,index,scale)" when sib specifies only an offset. |
| |
| Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Set and substitute SHLIB_DEP. |
| * configure: Rebuild. |
| * Makefile.in (SHLIB_DEP): New variable. |
| (LIBIBERTY_LISTS, BFD_LIST): New variables. |
| (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If |
| COMMON_SHLIB, add them to piclist with appropriate modifications. |
| ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB |
| here: just use piclist. |
| |
| Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com> |
| |
| * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define. |
| (print_insn_sparc): Rewrite v9/not-v9 tests. |
| (compare_opcodes): Likewise. |
| * sparc-opc.c (MASK_<ARCH>): Define. |
| (v6,v7,v8,sparclite,v9,v9a): Redefine. |
| (sparclet,v6notv9): Define. |
| (sparc_opcode_archs): Delete member `conflicts'. Add `supported'. |
| (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead. |
| |
| Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Call AC_PROG_CC before configure.host. |
| * configure: Rebuild. |
| |
| * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB). |
| |
| Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au> |
| |
| * i386-dis.c (onebyte_has_modrm): New static array. |
| (twobyte_has_modrm): New static array. |
| (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed. |
| |
| Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not |
| $(SHLINK). |
| |
| Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * ppc-opc.c (PPC): Undef, so default defination on Windows NT |
| doesn't conflict. |
| |
| Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on |
| m68010up, not just m68020up | cpu32. |
| |
| * Makefile.in (SONAME): New variable. |
| ($(SHLINK)): Make a link to the transformed name, as well. |
| (stamp-tshlink): New target. |
| (install): Skip stamp-tshlink during install. |
| |
| Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Call AC_ARG_PROGRAM. |
| * configure: Rebuild. |
| * Makefile.in (program_transform_name): New variable. |
| (install): Transform library name before installing it. |
| |
| Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * i960-dis.c (mem): Add HX dcinva instruction. |
| |
| Support for building as a shared library, based on patches from |
| Alan Modra <alan@spri.levels.unisa.edu.au>: |
| * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib. |
| New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC, |
| SHLIB_CFLAGS, COMMON_SHLIB, SHLINK. |
| * configure: Rebuild. |
| * Makefile.in (ALLLIBS): New variable. |
| (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables. |
| (COMMON_SHLIB, SHLINK): New variables. |
| (.c.o): If PICFLAG is set, compile twice, once PIC, once normal. |
| (STAGESTUFF): Remove variable. |
| (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB). |
| (stamp-piclist, piclist): New targets. |
| ($(SHLIB), $(SHLINK)): New targets. |
| ($(OFILES)): Depend upon stamp-picdir. |
| (disassemble.o): Build twice if PICFLAG is set. |
| (MOSTLYCLEAN): Add pic/*.o. |
| (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist. |
| (distclean): Remove pic and stamp-picdir. |
| (install): Install shared libraries. |
| (stamp-picdir): New target. |
| |
| Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com> |
| |
| * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support. |
| Print unknown instruction as "unknown", rather than in hex. |
| |
| Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * dis-buf.c: Include "sysdep.h" before "dis-asm.h". |
| |
| Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com> |
| |
| * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting. |
| |
| Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte |
| when necessary. From Ulrich Drepper |
| <drepper@myware.rz.uni-karlsruhe.de>. |
| |
| Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com> |
| |
| * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with |
| sparc_num_opcodes. Update architecture enum values. |
| * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname. |
| (sparc_opcode_lookup_arch): New function. |
| (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes. |
| (sparc_opcodes): Add v9a shutdown insn. |
| |
| Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com> |
| |
| * sparc-dis.c (print_insn_sparc): Renamed from print_insn. |
| If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode |
| architecture. |
| (print_insn_sparc64): Deleted. |
| * disassemble.c (disassembler, case bfd_arch_sparc): Always use |
| print_insn_sparc. |
| |
| * sparc-opc.c (architecture_pname): Add v9a. |
| |
| Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com> |
| |
| * alpha-opc.h (alpha_insn_set): VAX floating point opcode was |
| incorrectly defined as 0x16 when it should be 0x15. |
| (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits! |
| (alpha_insn_set): added cvtst and cvttq float ops. Also added |
| excb (exception barrier) which is defined in the Alpha |
| Architecture Handbook version 2. |
| * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for |
| OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be |
| disassembled as or, for example. |
| |
| Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex. |
| (_print_insn_mips): Change i from int to unsigned int. |
| |
| Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu> |
| |
| * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different |
| from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli. |
| |
| Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com> |
| |
| * i386-dis.c: Added Pentium Pro instructions. |
| |
| Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to |
| being for Power2. |
| |
| Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * sh-opc.h (sh_nibble_type): Added REG_B. |
| (sh_arg_type): Added A_REG_B. |
| (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc |
| and stc.l opcodes. |
| * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B. |
| |
| Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * disassemble.c (disassembler): Use new bfd_big_endian macro. |
| |
| Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (distclean): Remove stamp-h. From Ronald |
| F. Guilmette <rfg@monkeys.com>. |
| |
| Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com> |
| |
| From David Mosberger-Tang <davidm@azstarnet.com>: |
| * alpha-dis.c (print_insn_alpha): fixed decoding of cpys |
| instruction. |
| |
| Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC. |
| (sh_table): Added many SH3 opcodes. |
| * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC. |
| |
| Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC. |
| (subco,subco.): Mark this PPC, not PPCCOM. |
| |
| Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure: Rebuild with autoconf 2.7. |
| |
| Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure: Rebuild with autoconf 2.6. |
| |
| Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com> |
| |
| * configure.in: Sort list of architectures. Accept but do nothing |
| for alliant, convex, pyramid, romp, and tahoe. |
| |
| Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * a29k-dis.c (print_special): Change num to unsigned int. |
| |
| Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu> |
| |
| * a29k-dis.c (print_insn): Cast insn24 to unsigned long when |
| shifting it. |
| |
| Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Call AC_CHECK_PROG to find and cache AR. |
| * configure: Rebuilt. |
| |
| Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com> |
| |
| * configure.in: Add case for bfd_i860_arch. |
| * configure: Rebuild. |
| |
| Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c (m68k_opcodes): Correct fmoveml operands. |
| * m68k-dis.c (NEXTSINGLE): Change i to unsigned int. |
| (NEXTDOUBLE): Likewise. |
| (print_insn_m68k): Don't match fmoveml if there is more than one |
| register in the list. |
| (print_insn_arg): Handle a place of '8' for a type of 'L'. |
| |
| Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c: Use #W rather than #w. |
| * m68k-dis.c (print_insn_arg): Handle new 'W' place. |
| |
| Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf, |
| and likewise for all the dbxx opcodes. |
| |
| Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com> |
| |
| * arc-dis.c: Include elf-bfd.h rather than libelf.h. |
| |
| Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk> |
| |
| * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added |
| the VR4100 specific instructions to the mips_opcodes structure. |
| |
| Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mpw-config.in, mpw-make.sed: Remove ugly workaround for |
| ugly Metrowerks bug in CW6, is fixed in CW7. |
| |
| Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * ppc-opc.c (whole file): Add flags for common/any support. |
| |
| Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (BISON): Remove macro. |
| (FLAGS_TO_PASS): Remove BISON. |
| |
| Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com> |
| |
| Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> |
| |
| * m68k-dis.c (print_insn_m68k): Recognize all two-word |
| instructions that take no args by looking at the match mask. |
| (print_insn_arg): Always print "%" before register names. |
| [case 'c']: Use "nc" for the no-cache case, as recognized by gas. |
| [case '_']: Don't print "@#" before address. |
| [case 'J']: Use "%s" as format string, not register name. |
| [case 'B']: Treat place == 'C' like 'l' and 'L'. |
| |
| Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com> |
| |
| * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode |
| name correctly. |
| |
| Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com> |
| |
| From David Mosberger-Tang <davidm@azstarnet.com> |
| |
| * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added. |
| (alpha_insn_set): added definitions for VAX floating point |
| instructions (Unix compilers don't generate these, but handcoded |
| assembly might still use them). |
| |
| * alpha-dis.c (print_insn_alpha): added support for disassembling |
| the miscellaneous instructions in the Alpha instruction set. |
| |
| Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k, |
| no longer create sysdep.h, sed ppc-opc.c to work around a |
| serious Metrowerks C bug. |
| * mpw-make.in: Remove. |
| * mpw-make.sed: New file, used by mpw-configure to edit |
| Makefile.in into an MPW makefile. |
| |
| Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (maintainer-clean): New synonym for realclean. |
| |
| Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c: Split pmove patterns which use 'P' into patterns |
| which use '0', '1', and '2' instead. Specify the proper size for |
| a pmove immediate operand. Correct the pmovefd patterns to be |
| moves to a register, not from a register. |
| * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'. |
| |
| Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (sparc_opcodes): Mark all insns that reference |
| %psr, %wim, %tbr as F_NOTV9. |
| |
| Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (Makefile): Just rebuild Makefile when running |
| config.status. |
| (config.h, stamp-h): New targets. |
| * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM |
| earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when |
| rebuilding config.h. |
| * configure: Rebuild. |
| |
| * mips-opc.c: Change unaligned loads and stores with "t,A" |
| operands to use "t,A(b)". |
| |
| Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com> |
| |
| * sh-dis.c (print_insn_shx): Add F_FR0 support. |
| |
| Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com> |
| |
| * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate |
| until 3 instead of until 2. |
| |
| Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (ALL_CFLAGS): Define. |
| (.c.o, disassemble.o): Use $(ALL_CFLAGS). |
| (MOSTLYCLEAN): Add config.log. |
| (distclean): Don't remove config.log. |
| * configure.in: Substitute HDEFINES. |
| * configure: Rebuild. |
| |
| Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com> |
| |
| * sh-opc.h (sh_arg_type): Add F_FR0. |
| (sh_table, case fmac): Add F_FR0 as first argument. |
| |
| Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com> |
| |
| * sh-opc.h (sh_opcode_info): Increase arg array size to 4. |
| |
| Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-dis.c: Remove all references to NO_V9. |
| |
| Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * aclocal.m4: Just include ../bfd/aclocal.m4. |
| * configure: Rebuild. |
| |
| Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-dis.c (X_DISP19): Define. |
| (print_insn, case 'G'): Use it. |
| (print_insn, case 'L'): Sign extend displacement. |
| |
| Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Run ../bfd/configure.host before AC_PROG_CC. |
| Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute |
| host_makefile_frag or frags. |
| * aclocal.m4: New file. |
| * configure: Rebuild. |
| * Makefile.in (INSTALL): Set to @INSTALL@. |
| (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@. |
| (INSTALL_DATA): Set to @INSTALL_DATA@. |
| (AR): Set to @AR@. |
| (AR_FLAGS): Set to rc rather than qc. |
| (CC): Define as @CC@. |
| (CFLAGS): Set to @CFLAGS@. |
| (@host_makefile_frag@): Remove. |
| (config.status): Remove dependency upon @frags@. |
| |
| * configure.in: ../bfd/config.bfd now just sets shell variables. |
| Use them rather than looking through target Makefile fragments. |
| * configure: Rebuild. |
| |
| Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com> |
| |
| * sh-opc.h (ftrc): Change FPUL_N to FPUL_M. |
| |
| Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn. |
| Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic |
| sparc64 insns. |
| |
| * sparc-opc.c (sparc_opcodes): Fix prefetcha insn. |
| (lookup_{name,value}): New functions. |
| (prefetch_table): New static local. |
| (sparc_{encode,decode}_prefetch): New functions. |
| * sparc-dis.c (print_insn): Handle '*' arg (prefetch function). |
| |
| Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com> |
| |
| * sh-opc.h: Add blank lines to improve readabililty of sh3e |
| instructions. |
| |
| Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com> |
| |
| * sh-dis.c: Correct comment on first line of file. |
| |
| Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * disassemble.c (disassembler): Handle bfd_mach_sparc64. |
| |
| * sparc-opc.c (asi, membar): New static locals. |
| (sparc_{encode,decode}_{asi,membar}): New functions. |
| (sparc_opcodes, membar insn): Fix. |
| * sparc-dis.c (print_insn): Call sparc_decode_asi. |
| Support decoding of membar masks. |
| (X_MEMBAR): Define. |
| |
| Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl. |
| |
| Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis, |
| and likewise for the other branches. Add bhs as an alias for bcc, |
| and likewise for the size variants. Add dbhs as an alias for |
| dbcc. |
| |
| Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu) |
| |
| * sh-opc.h (FP sts instructions): Update to match reality. |
| |
| Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-dis.c: (fpcr_names): Add % before all register names. |
| (reg_names): Likewise. |
| (print_insn_arg): Don't explicitly print % before register names. |
| Add % before register names in static array names. In case 'r', |
| print data registers as `@(Dn)', not `Dn@'. When printing a |
| memory address, don't print @# before it. |
| (print_indexed): Change base_disp and outer_disp from int to |
| bfd_vma. Print using MIT syntax, not mutant invalid Motorola |
| syntax. Sign extend 8 byte displacement correctly. |
| (print_base): Print using MIT syntax. Print zpc when appropriate. |
| Change parameter disp from int to bfd_vma. |
| |
| * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases |
| for jsr. |
| |
| Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu) |
| |
| * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N, |
| F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N. |
| * sh-opc.h (sh_arg_type): Add new operand types. |
| (sh_table): Add new opcodes from SH3E Floating Point ISA. |
| |
| Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (distclean): Remove generated file config.h. |
| |
| Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (distclean): Remove generated file config.h. |
| |
| Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * m68k-opc.c: New file, holding tables from include/opcode/m68k.h. |
| Clean up tables. |
| * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff. |
| (opcode): Remove. |
| (print_insn_m68k): Change d to be const. Use m68k_numopcodes |
| rather than numopcodes. Use m68k_opcodes rather than removed |
| opcode function. Don't check F_ALIAS. |
| (print_insn_arg): Change first parameter to be const char *. |
| * Makefile.in (ALL_MACHINES): Add m68k-opc.o. |
| (m68k-opc.o): New target. |
| * configure.in: Build m68k-opc.o for bfd_m68k_arch. |
| * configure: Rebuild. |
| |
| Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-dis.c (HASH_SIZE, HASH_INSN): Define. |
| (opcode_bits, opcode_hash_table): New variables. |
| (opcodes_initialized): Renamed from opcodes_sorted. |
| (build_hash_table): New function. |
| (is_delayed_branch): Use hash table. |
| (print_insn): Renamed from print_insn_sparc, made static. |
| Build and use hash table. If !sparc64, ignore sparc64 insns, |
| and vice-versa if sparc64. |
| (print_insn_sparc, print_insn_sparc64): New functions. |
| (compare_opcodes): Move sparc64 opcodes to end. |
| Print commutative insns with constant second. |
| * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS. |
| |
| Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * sh-dis.c (print_insn_shx): Remove unused local dslot. Use |
| print_address_func for A_BDISP12 and A_BDISP8. Correct test which |
| avoids printing a delay slot in a delay slot. |
| * sh-opc.h (sh_table): Fully bracket last entry. |
| |
| Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sparc-opc.c (sllx, srax, srlx): Fix disassembly. |
| |
| Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com> |
| |
| * configure.in: Get host_makefile_frag from ${srcdir}. |
| |
| * configure.in: Autoconfiscated. Check for string[s].h. Create |
| config.h from config.in. Don't set up sysdep.h link. |
| * sysdep.h: New file. |
| * configure, config.in: New files, generated from configure.in. |
| * Makefile.in: Updated to be processed autoconf-style. |
| (distclean): Keep sysdep.h. Remove config.log and config.cache. |
| (Makefile): Depend on config.status. |
| (config.status): New rule. |
| * configure.bat: Update Makefile substitutions. |
| |
| Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com> |
| |
| * mips-opc.c (L1): Define. |
| (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid, |
| addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti, |
| and wb. |
| |
| Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu |
| if ISA 3 and addu otherwise, replacing or, since some MIPS chips |
| have multiple add units but only a single logical unit. |
| |
| * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3, |
| shifted by 18, without any insertion or extraction function. |
| (insert_cr, extract_cr): Remove. |
| |
| Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before |
| register names. |
| |
| Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * mpw-config.in: Add sh and i386 configs, remove sparc config. |
| * sh-opc.h: Add copyright. |
| |
| Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com> |
| |
| * Makefile.in (crunch-m68k): Delete extra target accidentally |
| checked in a while ago. |
| |
| Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com> |
| |
| * sh-opc.h (sh_table): Add SH3 support. |
| |
| Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com> |
| |
| * sh-opc.h: Added bsrf and braf. |
| |
| Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk) |
| |
| * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete |
| bogus [ls]fm{ea,fd} patterns. |
| |
| * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc. |
| * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and |
| initialize it from memory. Make function static. |
| (print_insn_{big,little}_arm): New functions. |
| * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for |
| the correct endianness. |
| |
| Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com> |
| |
| * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from |
| enum list. |
| |
| Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * m68k-dis.c (opcode): Finish change made by Kung Hsu on April |
| 17th, so that it builds again using GCC as the compiler. |
| |
| Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * mips-dis.c (print_insn_little_mips): Cast return value from |
| bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips |
| expects an unsigned long, and that might be fewer words of |
| argument storage (e.g., if bfd_vma is long long on a 32-bit |
| machine). |
| (print_insn_big_mips): Likewise with bfd_getb32 value. |
| (_print_insn_mips): Now static. |
| |
| Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com> |
| |
| * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because |
| gcc memory hog problem with initializer is fixed. |
| |
| Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com> |
| |
| Merge in support for Mac MPW as a host. |
| (Old change descriptions retained for informational value.) |
| |
| * mpw-config.in (archname): Compute from the config. |
| (BFD_MACHINES, ARCHDEFS): Put into mk.tmp. |
| |
| * mpw-config.in (target_arch): Compute from canonical target. |
| (m68k, mips, powerpc, sparc): Add architectures. |
| * mpw-make.in (disassemble.c.o): Add. |
| (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far). |
| |
| * mpw-config.in (BFD_MACHINES): Set to a default value. |
| * mpw-make.in (BFD_MACHINES): Remove wired-in value. |
| |
| * mpw-make.in (CSEARCH): Add extra-include to search path. |
| |
| * mpw-config.in (varargs.h): Don't create. |
| (sysdep.h): Create using forward-include. |
| * mpw-make.in (CSEARCH): Add include/mpw to search path. |
| |
| * mpw-config.in: New file, MPW version of configure.in. |
| * mpw-make.in: New file, MPW version of Makefile.in. |
| |
| Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * alpha-dis.c (print_insn_alpha): Put empty statement after |
| default label. |
| |
| Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version. |
| (low_sign_extend): Likewise. |
| (get_field): Delete unused function. |
| (set_field, deposit_14, deposit_21): Likewise. |
| |
| Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * i386-dis.c: Support for more pentium opcodes. From Guy Harris |
| (guy@netapp.com). |
| |
| Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com) |
| |
| Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de) |
| |
| * alpha-opc.h (OSF_ASMCODE): define |
| print pal-code names as defined in App C of the |
| Alpha Architecture Reference Manual |
| |
| * alpha-dis.c: cleaned up output |
| print stylized code forms as defined in App A.4.3 of the |
| Alpha Architecture Reference Manual |
| |
| Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for |
| `rfe'. |
| * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R', |
| 'N', and 'M'. |
| |
| Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * m68k-dis.c (opcode): New function. Returns address of opcode |
| table entry given index, even if the opcode table was split to |
| work around gcc bugs. |
| (print_insn_m68k): Call opcode instead of referencing m68k_opcodes |
| directly. |
| (BREAK_UP_BIG_DECL): Make secondary array static and const. |
| (reg_names): Now const. |
| (print_insn_arg): Arrays cacheFieldName and names now const. |
| (print_indexed): Array scales now const. |
| |
| Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * ppc-opc.c: Sort recently added instructions by minor opcode |
| number within major opcode number. |
| |
| Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hppa-dis.c: Include libhppa.h. |
| |
| Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-opc.c: Change dli to use M_DLI, and add dla. |
| |
| Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * Makefile.in (ALL_MACHINES): Add w65-dis.o. |
| |
| Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-opc.c: Add r4650 mul instruction. |
| |
| Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * mips-opc.c: Add uld and usd macros for unaligned double load and |
| store. |
| |
| Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci, |
| mfdcr, mtdcr, icbt, iccci. |
| |
| Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * i960-dis.c (struct tabent, struct sparse_tabent): Change the |
| signed char fields to shorts, more portable. |
| |
| Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * i960-dis.c (struct tabent, struct sparse_tabent): Declare the |
| char fields as signed chars, since they may have negative values. |
| |
| Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum |
| (mycroft@netbsd.org). |
| |
| Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| From "Logg, Ed" <elogg@ea.com>: |
| * ppc-opc.c (extract_bdm): Correct parenthezisation. |
| * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized |
| value. |
| |
| Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * ppc-opc.c: Changes based on patch from David Edelsohn |
| <edelsohn@mhpcc.edu>. |
| (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of |
| SPR. |
| (FXM_MASK): Define. |
| (insert_tbr): New static function. |
| (extract_tbr): New static function. |
| (XFXFXM_MASK, XFXM): Define. |
| (XSPRBAT_MASK, XSPRG_MASK): Define. |
| (powerpc_opcodes): Add instructions to access special registers by |
| name. Add mtcr and mftbu. |
| |
| Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| * mips-opc.c (P3): Define. |
| (mips_opcodes): Add mad and madu. |
| |
| Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat> |
| |
| * configure.in: Add W65 support. |
| * disassemble.c: Likewise. |
| * w65-opc.h, w65-dis.c: New files. |
| |
| Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com) |
| |
| * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit |
| immediates. |
| |
| Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| * mips-opc.c: Add dli as a synonym for li. |
| |
| Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and |
| print something for reserved opcode values, even if it won't |
| assemble again. |
| |
| * mips-dis.c (_print_insn_mips): When initializing, shift right |
| and mask, to avoid sign extension problems on the Alpha. |
| |
| * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr |
| control registers. |
| |
| Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com) |
| |
| * sh-opc.h (mov.l gbr): Get direction right. |
| * sh-dis.c (print_insn_shx): New function. |
| (print_insn_shl, print_insn_sh): Call print_insn_shx to |
| print opcodes with right byte order. |
| |
| Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com> |
| |
| * ns32k-dis.c (struct ns32k_option): Renamed from struct option, |
| to avoid conflicts with getopt. |
| |
| Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| * hppa-dis.c (print_insn_hppa): Read the instruction using |
| bfd_getb32, so that it works on a little endian or 64 bit host. |
| Remove unused local variable op. |
| |
| Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| * mips-opc.c: Use or instead of addu for pseudo-op move, since |
| addu does not work correctly if -mips3. |
| |
| Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| * a29k-dis.c (print_special): Add special register names defined |
| on 29030, 29040 and 29050. |
| (print_insn): Handle new operand type 'I'. |
| |
| Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| * Makefile.in (INSTALL): Use top level install.sh script. |
| |
| Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| * sparc-dis.c: Rewrite to use bitfields, rather than a union, so |
| that it works on a little endian host. |
| |
| Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| |
| * configure.in: Use ${config_shell} when running config.bfd. |
| |
| Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) |
| |
| * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3. |
| |
| Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) |
| |
| * a29k-dis.c (print_insn): Print the opcode. |
| |
| Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) |
| |
| * mips-opc.c (mips_opcodes): Set WR_t for sc and scd. |
| |
| Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu) |
| |
| * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3. |
| |
| Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) |
| |
| * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions |
| which store a value into memory. |
| |
| Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org) |
| |
| * configure.in, Makefile.in, disassemble.c: Add support for the ARM. |
| * arm-dis.c, arm-opc.h: New files. |
| |
| Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com) |
| |
| * Makefile.in (ns32k-dis.o): Add dependency. |
| * ns32k-dis.c (print_insn_arg): Declare initialized local as |
| string, not as array of chars. |
| |
| Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com) |
| |
| * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'. |
| |
| * sparc-opc.c: Added sparclite extended FP operations, and |
| versions of v9 impdep* instructions permitting specification of |
| the OPF field. |
| |
| Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com) |
| |
| * i960-dis.c (reg_names): Now const. |
| (struct sparse_tabent): New type, copied from array type in mem |
| function. |
| (ctrl): Local static array ctrl_tab now const. |
| (cobr): Local static array cobr_tab now const. |
| (mem): Local variables reg1, reg2, reg3 now point to const. Local |
| static variable mem_tab no longer explicitly initialized. Changed |
| mem_init to const array of struct sparse_tabent. |
| (reg): Local static variable reg_tab no longer explicitly |
| initialized. Changed reg_init to const array of struct |
| sparse_tabent. |
| (ea): Local static array scale_tab now const. |
| |
| * i960-dis.c (reg): Added i960JX instructions to reg_init table. |
| (REG_MAX): Updated. |
| |
| Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com) |
| |
| * configure.bat: the disassember needs to be enabled for |
| "objdump -d" to work in djgpp. |
| |
| Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com) |
| |
| * ns32k-dis.c: Deleted all code in "#ifdef GDB". |
| (invalid_float): Enabled general version, doesn't require running |
| on ns32k host. Changed to take char* argument, and test for |
| explicitly specified sizes, instead of using sizeof() on host CPU |
| types. |
| (INVALID_FLOAT): Cast first argument. |
| (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532, |
| list_P032, list_M032): Now const. |
| (optlist, list_search): Made appropriate arguments now point to |
| const. |
| (print_insn_arg): Changed static array of one-character-string |
| pointers into a static const array of characters; fixed sprintf |
| statement accordingly. |
| |
| Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au) |
| |
| * ns32k-dis.c: Semi-new file. Had apparently been dropped |
| from distribution. A ns32k-dis.c from a previous distribution has |
| been brought up to date and supports the new interface. |
| |
| * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k. |
| |
| * configure.in: add bfd_ns32k_arch target support. |
| |
| * Makefile.in: add ns32k-dis.o to ALL_MACHINES. |
| Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o. |
| |
| Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com) |
| |
| * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch |
| disassembly right. |
| |
| Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com) |
| |
| * h8300-dis.c, mips-dis.c: Don't use true and false. |
| |
| Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com) |
| |
| * configure.in: Change --with-targets to --enable-targets. |
| |
| Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) |
| |
| * mips-dis.c (_print_insn_mips): Build a static hash table mapping |
| opcodes to the first instruction with that opcode, to speed |
| disassembly of large files. From ralphc@pyramid.com (Ralph |
| Campbell). |
| |
| Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * Makefile.in (mostlyclean): Fix typo (was mostyclean). |
| |
| Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com) |
| |
| * configure.bat: update to latest makefile.in |
| |
| Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com) |
| |
| * a29k-dis.c (print_insn): Print 'x' type operand in hex. |
| * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly. |
| * sh-dis.c (print_insn_sh): Don't recur endlessly if delay |
| slot insn is in a delay slot. |
| * z8k-opc.h: (resflg): Fix patterns. |
| * h8500-opc.h Fix CR insn patterns. |
| |
| Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and |
| "cmpl" before POWER versions, so that gas -many uses them. |
| |
| Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com) |
| |
| * disassemble.c: New file. |
| * Makefile.in (OFILES): Add disassemble.o. |
| (disassemble.o): Provide dependencies; compile with $(ARCHDEFS). |
| * configure.in: Define ARCHDEFS in Makefile. Code taken from |
| binutils/configure.in. |
| |
| * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the |
| opcode being examined. |
| |
| Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS. |
| (insert_ral, insert_ram, insert_ras): New functions. |
| (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and |
| RAS for store with update. |
| |
| Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn |
| (edelsohn@npac.syr.edu). |
| |
| Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c (mips_opcodes): Correct operands of "nor" with an |
| immediate argument. |
| |
| Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com) |
| |
| * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0". |
| |
| Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * ppc-opc.c (powerpc_operands): The signedp field has been |
| removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag |
| instead. Add new operand SISIGNOPT. |
| (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT. |
| Based on patch from David Edelsohn (edelsohn@npac.syr.edu). |
| * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather |
| than signedp field. |
| |
| Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * i386-dis.c (struct private): Renamed to dis_private. `private' |
| is a reserved word for dynix cc. |
| |
| Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * configure.in: Change error message to refer to bfd/config.bfd |
| rather than bfd/configure.in. |
| |
| Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu) |
| |
| * ppc-opc.c: Define POWER2 as short alias flag. |
| (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and |
| fsqrt. |
| |
| Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * i960-dis.c (print_insn_i960): Don't read a second word for |
| opcodes 0, 1, 2 and 3. |
| |
| Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * configure.in: Don't build m68881-ext.o for bfd_m68k_arch. |
| |
| Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * m68881-ext.c: Removed; no longer used. |
| * Makefile.in: Changed accordingly. |
| |
| * m68k-dis.c (ext_format_68881): Don't declare. |
| (print_insn_m68k): If an instruction uses place 'i', it uses at |
| least four fixed bytes. |
| (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For |
| extended float, convert to double using floatformat_to_double, not |
| ieee_extended_to_double, and fetch the data before converting it. |
| |
| Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: It's sqrt.s, not sqrt.w. From |
| davidj@ICSI.Berkeley.EDU (David Johnson). |
| |
| Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the |
| PowerPC uses bdnz[l][a]. |
| |
| Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * dis-buf.c, i386-dis.c: Include sysdep.h. |
| |
| Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o. |
| |
| * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported |
| by Motorola PowerPC 601 with PPC_OPCODE_601. |
| * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): |
| Disassemble Motorola PowerPC 601 instructions as well as normal |
| PowerPC instructions. |
| |
| Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * i960-dis.c (reg, mem): Just use a static array instead of |
| calling xmalloc. |
| |
| Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu) |
| |
| * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the |
| condition name index if this is for a negated condition. |
| |
| * hppa-dis.c (print_insn_hppa): No space before 'H' operand. |
| Floating point format for 'H' operand is backwards from normal |
| case (0 == double, 1 == single). For '4', '6', '7', '9', and '8' |
| operands (fmpyadd and fmpysub), handle bizarre register |
| translation correctly for single precision format. |
| |
| * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F' |
| or 'I' operands if the next format specifier is 'M' (fcmp |
| condition completer). |
| |
| Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * ppc-opc.c (powerpc_operands): New operand type MBE to handle a |
| single number giving a bitmask for the MB and ME fields of an M |
| form instruction. Change NB to accept 32, and turn it into 0; |
| also turn 0 into 32 when disassembling. Seperated SH from NB. |
| (insert_mbe, extract_mbe): New functions. |
| (insert_nb, extract_nb): New functions. |
| (SC_MASK): Mask out SA and LK bits. |
| (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT, |
| RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark |
| "bctr" and "bctrl" as accepted by POWER. Change "rlwimi", |
| "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.", |
| "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to |
| use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions. |
| (powerpc_macros): Define table of macro definitions. |
| (powerpc_num_macros): Define. |
| |
| * ppc-dis.c (print_insn_powerpc): Don't skip optional operands |
| if PPC_OPERAND_NEXT is set. |
| |
| Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of |
| char. Retrieve contents using bfd_getl32 instead of shifting. |
| |
| Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * ppc-opc.c: New file. Opcode table for PowerPC, including |
| opcodes for POWER (RS/6000). |
| * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler. |
| * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o. |
| (CFILES): Add ppc-dis.c. |
| (ppc-dis.o, ppc-opc.o): New targets. |
| * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch. |
| |
| Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu) |
| |
| * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template. |
| No space before 'u', 'f', or 'N'. |
| |
| Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading |
| farther than we should. |
| |
| * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS. |
| |
| Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com) |
| |
| * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments. |
| |
| Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com) |
| |
| * i960-dis.c (print_insn_i960): Only read word2 if the instruction |
| needs it, to prevent reading past the end of a section. |
| |
| Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: Use macro for j instruction, to support SVR4 PIC. |
| Removed t,A case for la; always use t,A(b) case. |
| |
| Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| From Ted Lemen <mellon@pepper.ncd.com> |
| * mips-dis.c (print_insn_arg): Handle 'k'. |
| * mips-opc.c: Make cache use k, not t. |
| |
| Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add |
| FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct |
| FLOAT_FORMAT_CODE to put out floating point register names. |
| |
| Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: Use macros for jal variants, to support SVR4 PIC. |
| |
| Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x. |
| |
| Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts |
| larger than 32. Moved dsxx32 variants first for disassembler. |
| |
| Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) |
| |
| * z8kgen.c, z8k-opc.h: Add full lda information. |
| |
| Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu) |
| |
| * hppa-dis.c (print_insn_hppa): Do not emit a space after |
| movb instructions. Any necessary space will be emitted by |
| the code to handle nullification completers. |
| |
| Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: Moved l.d down so that it disassembles as ldc1. |
| |
| Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * alpha-opc.h: Add ldl_l, fix typo for ldq_u. |
| * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE. |
| |
| Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: Correct lwu opcode value (book had it wrong). |
| |
| Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) |
| |
| * z8k-dis.c (FETCH_DATA): get just the right amount of data. |
| (unpack_instr): Cope with ARG_IMM4M1 type instructions. |
| |
| Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * m88k-dis.c (m88kdis): comment change. Remove space after |
| printing mnemonic. |
| (printop): handle new arg types DEC and XREG for m88110. |
| |
| Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu) |
| |
| * hppa-dis.c (print_insn_hppa): Handle 'z' operand |
| type for absolute branch addresses. Delete special |
| "ble" and "be" code in 'W' operand code. |
| |
| Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: Set hazard information correctly for branch |
| likely instructions. |
| |
| Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use |
| info->fprintf_func for printing and info->print_address_func for |
| address output. |
| |
| Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: Set INSN_TRAP for tXX instructions. |
| |
| Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): |
| Corrected second case of "b" for disassembler. |
| |
| Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls |
| to BFD swapping routines to correspond to BFD name changes. |
| |
| Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: Change div machine instruction to be z,s,t rather |
| than s,t. Change div macro to be d,v,t rather than d,s,t. |
| Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu, |
| rem and remu which generates only the corresponding div |
| instruction. This is for compatibility with the MIPS assembler, |
| which only generates the simple machine instruction when an |
| explicit destination of $0 is used. |
| * mips-dis.c (print_insn_arg): Handle 'z' (always register zero). |
| |
| Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set |
| WR_31 hazard for bal, bgezal, bltzal. |
| |
| Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * hppa-dis.c (print_insn_hppa): Use print function |
| from within the disassemble_info, not fprintf_filtered. |
| |
| Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) |
| |
| * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff |
| Law, law@cs.utah.edu.) |
| |
| Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c ("absu"): Removed. |
| ("dabs"): Added. |
| |
| Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: Added r6000 and r4000 instructions and macros. |
| Changed hazard information to distinguish between memory load |
| delays and coprocessor load delays. |
| |
| Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s. |
| |
| Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com) |
| |
| * configure.in: Don't pass cpu to config.bfd. |
| |
| Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * m88k-dis.c (m88kdis): Make class unsigned. |
| |
| Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * alpha-dis.c (print_insn_alpha): One branch format case was |
| missing the instruction name. |
| |
| Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com) |
| |
| * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS. |
| Add the arch-specific auxiliary files. |
| (OFILES): Remove the arch-specific auxiliary files |
| and use BFD_MACHINES instead of DIS_LIBS. |
| * configure.in: Set BFD_MACHINES based on --with-targets option. |
| |
| Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly |
| for swc1. |
| |
| Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * sparc-opc.c: Change CONST to const to deal with gcc |
| -Dconst=__const -traditional. |
| |
| Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took |
| coprocessor instructions out of #if 0, and made them use new |
| argument type "C". |
| |
| Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h. |
| |
| Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com) |
| |
| * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch |
| instruction, for use by the disassembler. |
| |
| * sparc-dis.c (SEX): Add sign extension macro. Replace many |
| hand-coded sign extensions that depended on 32-bit host ints. |
| FIXME, we still depend on big-endian host bitfield ordering. |
| (sparc_print_insn): Set the insn_info_valid field, and the |
| other fields that describe the instruction being printed. |
| |
| Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com) |
| |
| * sparc-opc.c (call): Accept all 6 addressing modes valid for |
| `jmp' instead of just one of them. |
| |
| Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * hppa-dis.c: Move floating registers from reg_names to fp_reg_names. |
| (fput_fp_reg_r): Renamed from fput_reg_r. |
| (fput_fp_reg): New function. |
| (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate. |
| |
| * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards. |
| |
| * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD. |
| |
| Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com) |
| |
| * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'. |
| |
| * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n', |
| don't output a space. |
| |
| * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad. |
| |
| Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com) |
| |
| * mips-opc.c: New file, containing opcode table from |
| ../include/opcode/mips.h. |
| * Makefile.in: Add it. |
| |
| Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * m88k-dis.c: New file, moved in from gdb and changed to use the |
| new dis-asm.h disassembler interface. |
| * Makefile.in (DIS_LIBS): Added m88k-dis.o. |
| (m88k-dis.o): New target. |
| |
| Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to |
| argument string const char * to correspond to opcode/mips.h. |
| |
| Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * mips-dis.c: Updated to account for name changes in new version |
| of opcode/mips.h. |
| * Makefile.in: Added header file dependencies. |
| |
| Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com) |
| |
| * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction. |
| |
| Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign |
| extend, rather than shifts. |
| |
| Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com) |
| |
| * Makefile.in: Undo 15 June change. |
| |
| Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com) |
| |
| * m68k-dis.c (print_insn_arg): Change return value to byte count |
| or error code. |
| * m68k-dis.c: Re-write to detect invalid operands before |
| printing anything, so we can handle this the same way we |
| handle invalid opcodes. |
| |
| Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) |
| |
| * sh-dis.c, sh-opc.h: Understand some more opcodes. |
| |
| Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other |
| header files. |
| |
| Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) |
| |
| * sparc-dis.c: Don't declare qsort, since sysdep.h might. |
| |
| * configure.in: Do make sysdep.h link. |
| * Makefile.in: Search ../include. Don't search ../bfd. |
| |
| Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com) |
| |
| Changes from Jeff Law, law@cs.utah.edu: |
| * hppa-dis.c: Fix typo. 'a' and 'd' were reversed. |
| Do not print a space before the completers specified by |
| 'a' and 'd'. |
| |
| Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com) |
| |
| * mips-dis.c: No longer need to bomb out if HOST_64_BIT is |
| defined, since gdb has been fixed. |
| |
| Changes from Jeff Law, law@cs.utah.edu: |
| * hppa-dis.c (print_insn_hppa): Last argument to fput_reg, |
| fput_reg_r, fput_creg, fput_const, and fputs_filtered should |
| be a *disassemble_info, not a *FILE. |
| * hppa-dis.c: Support 'd', '!', and 'a'. |
| * hppa-dis.c: Support 's' to extract a 2 bit space register. |
| * hppa-dis.c: Delete cases which are no longer needed. |
| |
| Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes. |
| |
| Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) |
| |
| * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with |
| H8/300-H opcodes. |
| |
| Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com) |
| |
| * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h. |
| * configure.in: No longer need to configure to get sysdep.h. |
| |
| Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * Patches from Jeffrey Law <law@cs.utah.edu>. |
| * hppa-dis.c: Support 'I', 'J', and 'K' in output |
| templates for 1.1 FP computational instructions. |
| |
| Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) |
| |
| * h8500-dis.c (print_insn_h8500): Address argument is type |
| bfd_vma. |
| * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002): |
| Ditto. |
| |
| * h8500-opc.h (addr_class_type): No comma at end of enumerator. |
| * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto. |
| |
| * sparc-dis.c (compare_opcodes): Move static declaration to |
| top-level. |
| |
| Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp |
| instruction, remove unimp hack from 'l' argument. |
| |
| Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's |
| happy. |
| |
| Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson): |
| * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor |
| instructions. |
| |
| Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) |
| |
| * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some |
| arrays of string pointers to 2-d arrays of chars, to save |
| space. |
| |
| Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com) |
| |
| * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c: |
| Cast second arg to read_memory_func to "bfd_byte *", as necessary. |
| |
| Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) |
| |
| * hppa-dis.c: New file from Utah, adapted to new disassembler |
| calling interface. |
| * Makefile.in: Include it. |
| |
| Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * sh-dis.c, sh-opc.h: New files. |
| |
| Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * alpha-dis.c, alpha-opc.h: New files. |
| |
| Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| |
| * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed |
| value. |
| |
| Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com) |
| |
| * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias. |
| |
| Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com) |
| |
| * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than |
| const. |
| |
| Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com) |
| |
| * sparc-dis.c: Use fprintf_func a few places where I forgot, |
| and double percent signs a few places. |
| |
| * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils. |
| |
| * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c: |
| Use info->print_address_func not print_address. |
| |
| * dis-buf.c (generic_print_address): New function. |
| |
| Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * Makefile.in: Add sparc-dis.c. |
| sparc-dis.c: New file, merges binutils and gdb versions as follows: |
| From GDB: |
| Add `add' instruction to the set that get checked |
| for a preceding `sethi' in order to print an absolute address. |
| * (print_insn): Disassembly prefers real instructions. |
| (is_delayed_branch): Speed up. |
| * sparc-opc.c: Add ALIAS bit to aliases. Fix up opcode tables. |
| Still missing some float ops, and needs testing. |
| * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by |
| F_ALIAS. Use printf, not fprintf, when not passing a file |
| pointer... |
| (compare_opcodes): Check that identical instructions have |
| identical opcodes, complain otherwise. |
| From binutils: |
| * New 'm' arg. |
| * Include reg_names. |
| From neither: |
| Use dis-asm.h/read_memory_func interface. |
| |
| Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com) |
| |
| * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data): |
| deliberately return non-zero to setjmp from longjmp. Otherwise |
| this code fails to compile. |
| |
| Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com) |
| |
| * m68k-dis.c: Fix prototype for fetch_arg(). |
| |
| Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com) |
| |
| * dis-buf.c: New file, for new read_memory_func interface. |
| Makefile.in (OFILES): Include it. |
| m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c: |
| Use new read_memory_func interface. |
| |
| Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right. |
| * h8500-opc.h: Fix couple of opcodes. |
| |
| Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) |
| |
| * Makefile.in: add dvi & installcheck targets |
| |
| Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com) |
| |
| * Makefile.in: Update for h8500-dis.c. |
| |
| Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * h8500-dis.c, h8500-opc.h: New files |
| |
| Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com) |
| |
| * mips-dis.c, z8k-dis.c: Converted to use interface defined in |
| ../include/dis-asm.h. |
| * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c |
| and ../gdb/m68k-pinsn.c). |
| * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c |
| and ../gdb/i386-pinsn.c). |
| * m68881-ext.c: New file. Moved definition of |
| ext_format ext_format_68881 from ../gdb/m68k-tdep.c. |
| * Makefile.in: Adjust for new files. |
| * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com). |
| * m68k-dis.c: Recognize '9' placement code, so (say) pflush |
| can be dis-assembled. |
| |
| Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) |
| |
| * mips-dis.c (print_insn_arg): Now returns void. |
| |
| Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com) |
| |
| * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h |
| files that use the macros. |
| |
| Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) |
| |
| * mips-dis.c: New file, from gdb/mips-pinsn.c. |
| * Makefile.in (DIS_LIBS): Added mips-dis.o. |
| (CFILES): Added mips-dis.c. |
| |
| Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines |
| * z8kgen.c, z8k-opc.h: fix sizes of some shifts. |
| |
| Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com) |
| |
| * Makefile.in: Improve *clean rules. |
| * configure.in: Allow a default host. |
| |
| Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep |
| files include other sysdep files |
| |
| Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint |
| |
| Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com) |
| |
| * configure.in: For host support, use ../bfd/configure.host |
| so it stays in sync with the ../bfd/hosts database. |
| |
| Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) |
| |
| * configure.in: use cpu-vendor-os triple instead of nested cases |
| |
| Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com) |
| |
| * z8k-dis.c (unparse_instr): fix bug where opcode returned was |
| *always* the wrong one. |
| |
| Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * z8kgen.c: added copyright info |
| |
| Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * z8k-dis.c (unparse_instr): prettier tabs |
| * z8kgen.c z8k-opc.h: bug fixes in tables |
| |
| Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com) |
| |
| * configure.in: Add ncr* configuration. |
| * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make |
| picayune ANSI compilers happy. |
| |
| Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com) |
| |
| * configure.in (i386): Make i386 and i486 synonymous for now. |
| * configure.in (i[34]86-*-sysv4): Add my_host definition. |
| |
| Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com) |
| |
| * Makefile.in (install): Fix typo. |
| |
| Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com) |
| |
| * Makefile.in (make): Remove obsolete crud. |
| (sparc-opc.o): Avoid Sun Make VPATH bug. |
| |
| Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com) |
| |
| * Makefile.in: since there are no SUBDIRS, remove rule and |
| references of subdir_do. |
| |
| Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com) |
| |
| * Makefile.in (install): Get the library name right here too. |
| Don't install bfd.h, since it's unrelated to this library. No |
| subdirs to recurse into, either. |
| (CFILES): The source file has a .c suffix, not .o. |
| |
| * sparc-opc.c: New file, moved from BFD. |
| * Makefile.in (OFILES): Build it. |
| |
| Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com) |
| |
| * z8k-dis.c: fixed forward refferences of some declarations. |
| |
| Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com) |
| |
| * Makefile.in: get the name of the library right |
| |
| Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com) |
| |
| * z8k-dis.c: knows how to disassemble z8k stuff |
| * z8k-opc.h: new file full of z8000 opcodes |
| |
| Fri Aug 28 15:38:03 1992 Ken Raeburn (raeburn@cygnus.com) |
| |
| * Renamed opc-sparc.c to sparc-opc.c for systems with short |
| filename constraints. |
| * Makefile.in: Updated to reflect change. |
| |
| |
| Copyright (C) 1992-1997 Free Software Foundation, Inc. |
| |
| Copying and distribution of this file, with or without modification, |
| are permitted in any medium without royalty provided the copyright |
| notice and this notice are preserved. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
