| # Makefile.in generated automatically by automake 1.4 from Makefile.am |
| |
| # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| |
| SHELL = @SHELL@ |
| |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| VPATH = @srcdir@ |
| prefix = @prefix@ |
| exec_prefix = @exec_prefix@ |
| |
| bindir = @bindir@ |
| sbindir = @sbindir@ |
| libexecdir = @libexecdir@ |
| datadir = @datadir@ |
| sysconfdir = @sysconfdir@ |
| sharedstatedir = @sharedstatedir@ |
| localstatedir = @localstatedir@ |
| libdir = @libdir@ |
| infodir = @infodir@ |
| mandir = @mandir@ |
| includedir = @includedir@ |
| oldincludedir = /usr/include |
| |
| DESTDIR = |
| |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| |
| top_builddir = . |
| |
| ACLOCAL = @ACLOCAL@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOMAKE = @AUTOMAKE@ |
| AUTOHEADER = @AUTOHEADER@ |
| |
| INSTALL = @INSTALL@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| transform = @program_transform_name@ |
| |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_alias = @build_alias@ |
| build_triplet = @build@ |
| host_alias = @host_alias@ |
| host_triplet = @host@ |
| target_alias = @target_alias@ |
| target_triplet = @target@ |
| AR = @AR@ |
| AS = @AS@ |
| BUILD_DLLTOOL = @BUILD_DLLTOOL@ |
| BUILD_DLLWRAP = @BUILD_DLLWRAP@ |
| BUILD_MISC = @BUILD_MISC@ |
| BUILD_NLMCONV = @BUILD_NLMCONV@ |
| BUILD_SRCONV = @BUILD_SRCONV@ |
| BUILD_WINDRES = @BUILD_WINDRES@ |
| CATALOGS = @CATALOGS@ |
| CATOBJEXT = @CATOBJEXT@ |
| CC = @CC@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| DATADIRNAME = @DATADIRNAME@ |
| DEMANGLER_NAME = @DEMANGLER_NAME@ |
| DLLTOOL = @DLLTOOL@ |
| DLLTOOL_DEFS = @DLLTOOL_DEFS@ |
| EXEEXT = @EXEEXT@ |
| GCJ = @GCJ@ |
| GCJFLAGS = @GCJFLAGS@ |
| GMOFILES = @GMOFILES@ |
| GMSGFMT = @GMSGFMT@ |
| GT_NO = @GT_NO@ |
| GT_YES = @GT_YES@ |
| HDEFINES = @HDEFINES@ |
| INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@ |
| INSTOBJEXT = @INSTOBJEXT@ |
| INTLDEPS = @INTLDEPS@ |
| INTLOBJS = @INTLOBJS@ |
| LIBTOOL = @LIBTOOL@ |
| LN_S = @LN_S@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MKINSTALLDIRS = @MKINSTALLDIRS@ |
| MSGFMT = @MSGFMT@ |
| NLMCONV_DEFS = @NLMCONV_DEFS@ |
| OBJDUMP = @OBJDUMP@ |
| OBJDUMP_DEFS = @OBJDUMP_DEFS@ |
| OBJEXT = @OBJEXT@ |
| PACKAGE = @PACKAGE@ |
| POFILES = @POFILES@ |
| POSUB = @POSUB@ |
| RANLIB = @RANLIB@ |
| STRIP = @STRIP@ |
| UNDERSCORE = @UNDERSCORE@ |
| USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| l = @l@ |
| |
| INTLLIBS = @INTLLIBS@ |
| |
| AUTOMAKE_OPTIONS = cygnus dejagnu |
| |
| SUBDIRS = po |
| |
| tooldir = $(exec_prefix)/$(target_alias) |
| |
| CC_FOR_BUILD = @CC_FOR_BUILD@ |
| EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ |
| |
| YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi` |
| YFLAGS = -d |
| LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi` |
| |
| WARN_CFLAGS = @WARN_CFLAGS@ |
| AM_CFLAGS = $(WARN_CFLAGS) |
| |
| # these two are almost the same program |
| AR_PROG = ar |
| RANLIB_PROG = ranlib |
| |
| # objcopy and strip should be the same program |
| OBJCOPY_PROG = objcopy |
| STRIP_PROG = strip-new |
| |
| STRINGS_PROG = strings |
| |
| READELF_PROG = readelf |
| |
| # These should all be the same program too. |
| SIZE_PROG = size |
| NM_PROG = nm-new |
| OBJDUMP_PROG = objdump |
| |
| # This is the demangler, as a standalone program. |
| # Note: This one is used as the installed name too, unlike the above. |
| DEMANGLER_PROG = cxxfilt |
| |
| ADDR2LINE_PROG = addr2line |
| |
| NLMCONV_PROG = nlmconv |
| DLLTOOL_PROG = dlltool |
| WINDRES_PROG = windres |
| DLLWRAP_PROG = dllwrap |
| |
| SRCONV_PROG = srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT) |
| |
| man_MANS = ar.1 nm.1 objdump.1 ranlib.1 readelf.1 size.1 strings.1 strip.1 \ |
| objcopy.1 addr2line.1 nlmconv.1 $(DEMANGLER_NAME).1 |
| |
| |
| PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ $(ADDR2LINE_PROG) $(READELF_PROG) @BUILD_DLLWRAP@ @BUILD_MISC@ |
| |
| bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ $(ADDR2LINE_PROG) $(READELF_PROG) @BUILD_DLLWRAP@ @BUILD_MISC@ |
| |
| noinst_PROGRAMS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG) |
| |
| EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(DLLWRAP_PROG) |
| |
| # Stuff that goes in tooldir/ if appropriate |
| TOOL_PROGS = nm-new strip-new ar ranlib dlltool |
| |
| BASEDIR = $(srcdir)/.. |
| BFDDIR = $(BASEDIR)/bfd |
| INCDIR = $(BASEDIR)/include |
| |
| MKDEP = gcc -MM |
| |
| INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) @HDEFINES@ -I$(srcdir)/../intl -I../intl -DLOCALEDIR="\"$(prefix)/share/locale\"" |
| |
| HFILES = arsup.h bucomm.h budbg.h coffgrok.h debug.h nlmconv.h dlltool.h \ |
| windres.h winduni.h |
| |
| |
| GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h |
| |
| CFILES = addr2line.c ar.c arsup.c bucomm.c coffdump.c coffgrok.c debug.c \ |
| dlltool.c filemode.c ieee.c is-ranlib.c is-strip.c maybe-ranlib.c \ |
| maybe-strip.c nlmconv.c nm.c not-ranlib.c not-strip.c \ |
| objcopy.c objdump.c prdbg.c rdcoff.c rddbg.c size.c srconv.c \ |
| stabs.c strings.c sysdump.c version.c wrstabs.c \ |
| windres.c resrc.c rescoff.c resbin.c winduni.c readelf.c \ |
| resres.c dllwrap.c rename.c |
| |
| |
| GENERATED_CFILES = \ |
| underscore.c arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ |
| defparse.c deflex.c nlmheader.c rcparse.c rclex.c |
| |
| |
| DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c |
| WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c |
| |
| # Code shared by all the binutils. |
| BULIBS = bucomm.c version.c filemode.c |
| |
| BFDLIB = ../bfd/libbfd.la |
| |
| OPCODES = ../opcodes/libopcodes.la |
| |
| LIBIBERTY = ../libiberty/libiberty.a |
| |
| POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES) |
| |
| EXPECT = `if [ -f $$r/../expect/expect ] ; then \ |
| echo $$r/../expect/expect ; \ |
| else echo expect ; fi` |
| |
| RUNTEST = `if [ -f ${srcdir}/../dejagnu/runtest ] ; then \ |
| echo ${srcdir}/../dejagnu/runtest ; \ |
| else echo runtest ; fi` |
| |
| |
| CC_FOR_TARGET = ` \ |
| if [ -f $$r/../gcc/xgcc ] ; then \ |
| if [ -f $$r/../newlib/Makefile ] ; then \ |
| echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \ |
| else \ |
| echo $$r/../gcc/xgcc -B$$r/../gcc/; \ |
| fi; \ |
| else \ |
| if [ "@host@" = "@target@" ] ; then \ |
| echo $(CC); \ |
| else \ |
| echo gcc | sed '$(transform)'; \ |
| fi; \ |
| fi` |
| |
| |
| info_TEXINFOS = binutils.texi |
| |
| LDADD = $(BFDLIB) $(LIBIBERTY) $(INTLLIBS) |
| |
| size_SOURCES = size.c $(BULIBS) |
| |
| objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) |
| |
| strings_SOURCES = strings.c $(BULIBS) |
| |
| readelf_SOURCES = readelf.c version.c unwind-ia64.c |
| readelf_LDADD = $(INTLLIBS) $(LIBIBERTY) |
| |
| strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) |
| |
| nm_new_SOURCES = nm.c $(BULIBS) |
| |
| objdump_SOURCES = objdump.c prdbg.c $(DEBUG_SRCS) $(BULIBS) |
| objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(INTLLIBS) |
| |
| cxxfilt_SOURCES = |
| cxxfilt_LDADD = cplus-dem.o underscore.o $(LIBIBERTY) $(INTLLIBS) |
| |
| ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c $(BULIBS) |
| ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(INTLLIBS) |
| |
| ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c $(BULIBS) |
| ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(INTLLIBS) |
| |
| addr2line_SOURCES = addr2line.c $(BULIBS) |
| |
| srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) |
| |
| dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) |
| dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(INTLLIBS) |
| |
| coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) |
| |
| sysdump_SOURCES = sysdump.c $(BULIBS) |
| |
| nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS) |
| |
| windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.l \ |
| winduni.c resres.c $(BULIBS) |
| |
| windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(INTLLIBS) |
| |
| dllwrap_SOURCES = dllwrap.c version.c |
| dllwrap_LDADD = $(LIBIBERTY) $(INTLLIBS) |
| |
| DISTSTUFF = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \ |
| syslex.c deflex.c defparse.h defparse.c rclex.c rcparse.h rcparse.c |
| |
| |
| DISTCLEANFILES = stamp-under sysinfo underscore.c sysroff.c sysroff.h \ |
| site.exp site.bak |
| |
| |
| MAINTAINERCLEANFILES = config.texi |
| |
| MOSTLYCLEANFILES = sysinfo $(DEMANGLER_NAME).1 binutils.log binutils.sum \ |
| abcdefgh* |
| |
| |
| CLEANFILES = dep.sed DEP DEPA DEP1 DEP2 |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs |
| CONFIG_HEADER = config.h |
| CONFIG_CLEAN_FILES = |
| bin_PROGRAMS = size$(EXEEXT) objdump$(EXEEXT) ar$(EXEEXT) \ |
| strings$(EXEEXT) ranlib$(EXEEXT) objcopy$(EXEEXT) @BUILD_NLMCONV@ \ |
| @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ addr2line$(EXEEXT) \ |
| readelf$(EXEEXT) @BUILD_DLLWRAP@ @BUILD_MISC@ |
| noinst_PROGRAMS = nm-new$(EXEEXT) strip-new$(EXEEXT) cxxfilt$(EXEEXT) |
| PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS) |
| |
| |
| DEFS = @DEFS@ -I. -I$(srcdir) -I. |
| CPPFLAGS = @CPPFLAGS@ |
| LDFLAGS = @LDFLAGS@ |
| LIBS = @LIBS@ |
| nlmconv_OBJECTS = nlmconv.$(OBJEXT) nlmheader.$(OBJEXT) \ |
| bucomm.$(OBJEXT) version.$(OBJEXT) filemode.$(OBJEXT) |
| nlmconv_LDADD = $(LDADD) |
| nlmconv_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| nlmconv_LDFLAGS = |
| srconv_OBJECTS = srconv.$(OBJEXT) coffgrok.$(OBJEXT) bucomm.$(OBJEXT) \ |
| version.$(OBJEXT) filemode.$(OBJEXT) |
| srconv_LDADD = $(LDADD) |
| srconv_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| srconv_LDFLAGS = |
| sysdump_OBJECTS = sysdump.$(OBJEXT) bucomm.$(OBJEXT) version.$(OBJEXT) \ |
| filemode.$(OBJEXT) |
| sysdump_LDADD = $(LDADD) |
| sysdump_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| sysdump_LDFLAGS = |
| coffdump_OBJECTS = coffdump.$(OBJEXT) coffgrok.$(OBJEXT) \ |
| bucomm.$(OBJEXT) version.$(OBJEXT) filemode.$(OBJEXT) |
| coffdump_LDADD = $(LDADD) |
| coffdump_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| coffdump_LDFLAGS = |
| dlltool_OBJECTS = dlltool.$(OBJEXT) defparse.$(OBJEXT) deflex.$(OBJEXT) \ |
| bucomm.$(OBJEXT) version.$(OBJEXT) filemode.$(OBJEXT) |
| dlltool_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| dlltool_LDFLAGS = |
| windres_OBJECTS = windres.$(OBJEXT) resrc.$(OBJEXT) rescoff.$(OBJEXT) \ |
| resbin.$(OBJEXT) rcparse.$(OBJEXT) rclex.$(OBJEXT) winduni.$(OBJEXT) \ |
| resres.$(OBJEXT) bucomm.$(OBJEXT) version.$(OBJEXT) filemode.$(OBJEXT) |
| windres_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| windres_LDFLAGS = |
| dllwrap_OBJECTS = dllwrap.$(OBJEXT) version.$(OBJEXT) |
| dllwrap_DEPENDENCIES = ../libiberty/libiberty.a |
| dllwrap_LDFLAGS = |
| size_OBJECTS = size.$(OBJEXT) bucomm.$(OBJEXT) version.$(OBJEXT) \ |
| filemode.$(OBJEXT) |
| size_LDADD = $(LDADD) |
| size_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| size_LDFLAGS = |
| objdump_OBJECTS = objdump.$(OBJEXT) prdbg.$(OBJEXT) rddbg.$(OBJEXT) \ |
| debug.$(OBJEXT) stabs.$(OBJEXT) ieee.$(OBJEXT) rdcoff.$(OBJEXT) \ |
| bucomm.$(OBJEXT) version.$(OBJEXT) filemode.$(OBJEXT) |
| objdump_DEPENDENCIES = ../opcodes/libopcodes.la ../bfd/libbfd.la \ |
| ../libiberty/libiberty.a |
| objdump_LDFLAGS = |
| ar_OBJECTS = arparse.$(OBJEXT) arlex.$(OBJEXT) ar.$(OBJEXT) \ |
| not-ranlib.$(OBJEXT) arsup.$(OBJEXT) rename.$(OBJEXT) bucomm.$(OBJEXT) \ |
| version.$(OBJEXT) filemode.$(OBJEXT) |
| ar_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| ar_LDFLAGS = |
| strings_OBJECTS = strings.$(OBJEXT) bucomm.$(OBJEXT) version.$(OBJEXT) \ |
| filemode.$(OBJEXT) |
| strings_LDADD = $(LDADD) |
| strings_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| strings_LDFLAGS = |
| ranlib_OBJECTS = ar.$(OBJEXT) is-ranlib.$(OBJEXT) arparse.$(OBJEXT) \ |
| arlex.$(OBJEXT) arsup.$(OBJEXT) rename.$(OBJEXT) bucomm.$(OBJEXT) \ |
| version.$(OBJEXT) filemode.$(OBJEXT) |
| ranlib_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| ranlib_LDFLAGS = |
| objcopy_OBJECTS = objcopy.$(OBJEXT) not-strip.$(OBJEXT) \ |
| rename.$(OBJEXT) rddbg.$(OBJEXT) debug.$(OBJEXT) stabs.$(OBJEXT) \ |
| ieee.$(OBJEXT) rdcoff.$(OBJEXT) wrstabs.$(OBJEXT) bucomm.$(OBJEXT) \ |
| version.$(OBJEXT) filemode.$(OBJEXT) |
| objcopy_LDADD = $(LDADD) |
| objcopy_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| objcopy_LDFLAGS = |
| addr2line_OBJECTS = addr2line.$(OBJEXT) bucomm.$(OBJEXT) \ |
| version.$(OBJEXT) filemode.$(OBJEXT) |
| addr2line_LDADD = $(LDADD) |
| addr2line_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| addr2line_LDFLAGS = |
| readelf_OBJECTS = readelf.$(OBJEXT) version.$(OBJEXT) \ |
| unwind-ia64.$(OBJEXT) |
| readelf_DEPENDENCIES = ../libiberty/libiberty.a |
| readelf_LDFLAGS = |
| nm_new_OBJECTS = nm.$(OBJEXT) bucomm.$(OBJEXT) version.$(OBJEXT) \ |
| filemode.$(OBJEXT) |
| nm_new_LDADD = $(LDADD) |
| nm_new_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| nm_new_LDFLAGS = |
| strip_new_OBJECTS = objcopy.$(OBJEXT) is-strip.$(OBJEXT) \ |
| rename.$(OBJEXT) rddbg.$(OBJEXT) debug.$(OBJEXT) stabs.$(OBJEXT) \ |
| ieee.$(OBJEXT) rdcoff.$(OBJEXT) wrstabs.$(OBJEXT) bucomm.$(OBJEXT) \ |
| version.$(OBJEXT) filemode.$(OBJEXT) |
| strip_new_LDADD = $(LDADD) |
| strip_new_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a |
| strip_new_LDFLAGS = |
| cxxfilt_OBJECTS = |
| cxxfilt_DEPENDENCIES = cplus-dem.o underscore.o \ |
| ../libiberty/libiberty.a |
| cxxfilt_LDFLAGS = |
| LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ |
| LEXLIB = @LEXLIB@ |
| YLWRAP = $(top_srcdir)/../ylwrap |
| CFLAGS = @CFLAGS@ |
| COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| CCLD = $(CC) |
| LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ |
| TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi` |
| TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex |
| INFO_DEPS = binutils.info |
| DVIS = binutils.dvi |
| TEXINFOS = binutils.texi |
| man1dir = $(mandir)/man1 |
| MANS = $(man_MANS) |
| |
| NROFF = nroff |
| DIST_COMMON = README ./stamp-h.in ChangeLog Makefile.am Makefile.in \ |
| NEWS acinclude.m4 aclocal.m4 arlex.c arparse.c config.in configure \ |
| configure.in deflex.c defparse.c nlmheader.c rclex.c rcparse.c |
| |
| |
| DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) |
| |
| TAR = tar |
| GZIP_ENV = --best |
| SOURCES = $(nlmconv_SOURCES) $(srconv_SOURCES) $(sysdump_SOURCES) $(coffdump_SOURCES) $(dlltool_SOURCES) $(windres_SOURCES) $(dllwrap_SOURCES) $(size_SOURCES) $(objdump_SOURCES) $(ar_SOURCES) $(strings_SOURCES) $(ranlib_SOURCES) $(objcopy_SOURCES) $(addr2line_SOURCES) $(readelf_SOURCES) $(nm_new_SOURCES) $(strip_new_SOURCES) $(cxxfilt_SOURCES) |
| OBJECTS = $(nlmconv_OBJECTS) $(srconv_OBJECTS) $(sysdump_OBJECTS) $(coffdump_OBJECTS) $(dlltool_OBJECTS) $(windres_OBJECTS) $(dllwrap_OBJECTS) $(size_OBJECTS) $(objdump_OBJECTS) $(ar_OBJECTS) $(strings_OBJECTS) $(ranlib_OBJECTS) $(objcopy_OBJECTS) $(addr2line_OBJECTS) $(readelf_OBJECTS) $(nm_new_OBJECTS) $(strip_new_OBJECTS) $(cxxfilt_OBJECTS) |
| |
| all: all-redirect |
| .SUFFIXES: |
| .SUFFIXES: .S .c .dvi .info .l .lo .o .obj .ps .s .texi .texinfo .txi .y |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) |
| cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile |
| |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| cd $(top_builddir) \ |
| && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status |
| |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4 |
| cd $(srcdir) && $(ACLOCAL) |
| |
| config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| $(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) |
| cd $(srcdir) && $(AUTOCONF) |
| |
| config.h: stamp-h |
| @if test ! -f $@; then \ |
| rm -f stamp-h; \ |
| $(MAKE) stamp-h; \ |
| else :; fi |
| stamp-h: $(srcdir)/config.in $(top_builddir)/config.status |
| cd $(top_builddir) \ |
| && CONFIG_FILES= CONFIG_HEADERS=config.h:config.in \ |
| $(SHELL) ./config.status |
| @echo timestamp > stamp-h 2> /dev/null |
| $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in |
| @if test ! -f $@; then \ |
| rm -f $(srcdir)/stamp-h.in; \ |
| $(MAKE) $(srcdir)/stamp-h.in; \ |
| else :; fi |
| $(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) |
| cd $(top_srcdir) && $(AUTOHEADER) |
| @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null |
| |
| mostlyclean-hdr: |
| |
| clean-hdr: |
| |
| distclean-hdr: |
| -rm -f config.h |
| |
| maintainer-clean-hdr: |
| |
| mostlyclean-binPROGRAMS: |
| |
| clean-binPROGRAMS: |
| -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) |
| |
| distclean-binPROGRAMS: |
| |
| maintainer-clean-binPROGRAMS: |
| |
| install-binPROGRAMS: $(bin_PROGRAMS) |
| @$(NORMAL_INSTALL) |
| $(mkinstalldirs) $(DESTDIR)$(bindir) |
| @list='$(bin_PROGRAMS)'; for p in $$list; do \ |
| if test -f $$p; then \ |
| echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ |
| $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ |
| else :; fi; \ |
| done |
| |
| uninstall-binPROGRAMS: |
| @$(NORMAL_UNINSTALL) |
| list='$(bin_PROGRAMS)'; for p in $$list; do \ |
| rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ |
| done |
| |
| mostlyclean-noinstPROGRAMS: |
| |
| clean-noinstPROGRAMS: |
| -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) |
| |
| distclean-noinstPROGRAMS: |
| |
| maintainer-clean-noinstPROGRAMS: |
| |
| .c.o: |
| $(COMPILE) -c $< |
| |
| # FIXME: We should only use cygpath when building on Windows, |
| # and only if it is available. |
| .c.obj: |
| $(COMPILE) -c `cygpath -w $<` |
| |
| .s.o: |
| $(COMPILE) -c $< |
| |
| .S.o: |
| $(COMPILE) -c $< |
| |
| mostlyclean-compile: |
| -rm -f *.o core *.core |
| -rm -f *.$(OBJEXT) |
| |
| clean-compile: |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| maintainer-clean-compile: |
| |
| .c.lo: |
| $(LIBTOOL) --mode=compile $(COMPILE) -c $< |
| |
| .s.lo: |
| $(LIBTOOL) --mode=compile $(COMPILE) -c $< |
| |
| .S.lo: |
| $(LIBTOOL) --mode=compile $(COMPILE) -c $< |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| |
| maintainer-clean-libtool: |
| |
| nlmconv$(EXEEXT): $(nlmconv_OBJECTS) $(nlmconv_DEPENDENCIES) |
| @rm -f nlmconv$(EXEEXT) |
| $(LINK) $(nlmconv_LDFLAGS) $(nlmconv_OBJECTS) $(nlmconv_LDADD) $(LIBS) |
| |
| srconv$(EXEEXT): $(srconv_OBJECTS) $(srconv_DEPENDENCIES) |
| @rm -f srconv$(EXEEXT) |
| $(LINK) $(srconv_LDFLAGS) $(srconv_OBJECTS) $(srconv_LDADD) $(LIBS) |
| |
| sysdump$(EXEEXT): $(sysdump_OBJECTS) $(sysdump_DEPENDENCIES) |
| @rm -f sysdump$(EXEEXT) |
| $(LINK) $(sysdump_LDFLAGS) $(sysdump_OBJECTS) $(sysdump_LDADD) $(LIBS) |
| |
| coffdump$(EXEEXT): $(coffdump_OBJECTS) $(coffdump_DEPENDENCIES) |
| @rm -f coffdump$(EXEEXT) |
| $(LINK) $(coffdump_LDFLAGS) $(coffdump_OBJECTS) $(coffdump_LDADD) $(LIBS) |
| |
| dlltool$(EXEEXT): $(dlltool_OBJECTS) $(dlltool_DEPENDENCIES) |
| @rm -f dlltool$(EXEEXT) |
| $(LINK) $(dlltool_LDFLAGS) $(dlltool_OBJECTS) $(dlltool_LDADD) $(LIBS) |
| |
| windres$(EXEEXT): $(windres_OBJECTS) $(windres_DEPENDENCIES) |
| @rm -f windres$(EXEEXT) |
| $(LINK) $(windres_LDFLAGS) $(windres_OBJECTS) $(windres_LDADD) $(LIBS) |
| |
| dllwrap$(EXEEXT): $(dllwrap_OBJECTS) $(dllwrap_DEPENDENCIES) |
| @rm -f dllwrap$(EXEEXT) |
| $(LINK) $(dllwrap_LDFLAGS) $(dllwrap_OBJECTS) $(dllwrap_LDADD) $(LIBS) |
| |
| size$(EXEEXT): $(size_OBJECTS) $(size_DEPENDENCIES) |
| @rm -f size$(EXEEXT) |
| $(LINK) $(size_LDFLAGS) $(size_OBJECTS) $(size_LDADD) $(LIBS) |
| |
| objdump$(EXEEXT): $(objdump_OBJECTS) $(objdump_DEPENDENCIES) |
| @rm -f objdump$(EXEEXT) |
| $(LINK) $(objdump_LDFLAGS) $(objdump_OBJECTS) $(objdump_LDADD) $(LIBS) |
| |
| ar$(EXEEXT): $(ar_OBJECTS) $(ar_DEPENDENCIES) |
| @rm -f ar$(EXEEXT) |
| $(LINK) $(ar_LDFLAGS) $(ar_OBJECTS) $(ar_LDADD) $(LIBS) |
| |
| strings$(EXEEXT): $(strings_OBJECTS) $(strings_DEPENDENCIES) |
| @rm -f strings$(EXEEXT) |
| $(LINK) $(strings_LDFLAGS) $(strings_OBJECTS) $(strings_LDADD) $(LIBS) |
| |
| ranlib$(EXEEXT): $(ranlib_OBJECTS) $(ranlib_DEPENDENCIES) |
| @rm -f ranlib$(EXEEXT) |
| $(LINK) $(ranlib_LDFLAGS) $(ranlib_OBJECTS) $(ranlib_LDADD) $(LIBS) |
| |
| objcopy$(EXEEXT): $(objcopy_OBJECTS) $(objcopy_DEPENDENCIES) |
| @rm -f objcopy$(EXEEXT) |
| $(LINK) $(objcopy_LDFLAGS) $(objcopy_OBJECTS) $(objcopy_LDADD) $(LIBS) |
| |
| addr2line$(EXEEXT): $(addr2line_OBJECTS) $(addr2line_DEPENDENCIES) |
| @rm -f addr2line$(EXEEXT) |
| $(LINK) $(addr2line_LDFLAGS) $(addr2line_OBJECTS) $(addr2line_LDADD) $(LIBS) |
| |
| readelf$(EXEEXT): $(readelf_OBJECTS) $(readelf_DEPENDENCIES) |
| @rm -f readelf$(EXEEXT) |
| $(LINK) $(readelf_LDFLAGS) $(readelf_OBJECTS) $(readelf_LDADD) $(LIBS) |
| |
| nm-new$(EXEEXT): $(nm_new_OBJECTS) $(nm_new_DEPENDENCIES) |
| @rm -f nm-new$(EXEEXT) |
| $(LINK) $(nm_new_LDFLAGS) $(nm_new_OBJECTS) $(nm_new_LDADD) $(LIBS) |
| |
| strip-new$(EXEEXT): $(strip_new_OBJECTS) $(strip_new_DEPENDENCIES) |
| @rm -f strip-new$(EXEEXT) |
| $(LINK) $(strip_new_LDFLAGS) $(strip_new_OBJECTS) $(strip_new_LDADD) $(LIBS) |
| |
| cxxfilt$(EXEEXT): $(cxxfilt_OBJECTS) $(cxxfilt_DEPENDENCIES) |
| @rm -f cxxfilt$(EXEEXT) |
| $(LINK) $(cxxfilt_LDFLAGS) $(cxxfilt_OBJECTS) $(cxxfilt_LDADD) $(LIBS) |
| .l.c: |
| $(SHELL) $(YLWRAP) "$(LEX)" $< $(LEX_OUTPUT_ROOT).c $@ -- $(AM_LFLAGS) $(LFLAGS) |
| .y.c: |
| $(SHELL) $(YLWRAP) "$(YACC)" $< y.tab.c $*.c y.tab.h $*.h -- $(AM_YFLAGS) $(YFLAGS) |
| arparse.h: arparse.c |
| defparse.h: defparse.c |
| nlmheader.h: nlmheader.c |
| rcparse.h: rcparse.c |
| |
| |
| binutils.info: binutils.texi |
| binutils.dvi: binutils.texi |
| |
| |
| DVIPS = dvips |
| |
| .texi.info: |
| @rm -f $@ $@-[0-9] $@-[0-9][0-9] |
| $(MAKEINFO) -I $(srcdir) $< |
| |
| .texi.dvi: |
| TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \ |
| MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $< |
| |
| .texi: |
| @rm -f $@ $@-[0-9] $@-[0-9][0-9] |
| $(MAKEINFO) -I $(srcdir) $< |
| |
| .texinfo.info: |
| @rm -f $@ $@-[0-9] $@-[0-9][0-9] |
| $(MAKEINFO) -I $(srcdir) $< |
| |
| .texinfo: |
| @rm -f $@ $@-[0-9] $@-[0-9][0-9] |
| $(MAKEINFO) -I $(srcdir) $< |
| |
| .texinfo.dvi: |
| TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \ |
| MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $< |
| |
| .txi.info: |
| @rm -f $@ $@-[0-9] $@-[0-9][0-9] |
| $(MAKEINFO) -I $(srcdir) $< |
| |
| .txi.dvi: |
| TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \ |
| MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $< |
| |
| .txi: |
| @rm -f $@ $@-[0-9] $@-[0-9][0-9] |
| $(MAKEINFO) -I $(srcdir) $< |
| .dvi.ps: |
| $(DVIPS) $< -o $@ |
| |
| install-info-am: $(INFO_DEPS) |
| @$(NORMAL_INSTALL) |
| $(mkinstalldirs) $(DESTDIR)$(infodir) |
| @list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| if test -f $$file; then d=.; else d=$(srcdir); fi; \ |
| for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \ |
| if test -f $$d/$$ifile; then \ |
| echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \ |
| $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \ |
| else : ; fi; \ |
| done; \ |
| done |
| @$(POST_INSTALL) |
| @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\ |
| install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\ |
| done; \ |
| else : ; fi |
| |
| uninstall-info: |
| $(PRE_UNINSTALL) |
| @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \ |
| ii=yes; \ |
| else ii=; fi; \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| test -z "$ii" \ |
| || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \ |
| done |
| @$(NORMAL_UNINSTALL) |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \ |
| done |
| |
| dist-info: $(INFO_DEPS) |
| list='$(INFO_DEPS)'; \ |
| for base in $$list; do \ |
| if test -f $$base; then d=.; else d=$(srcdir); fi; \ |
| for file in `cd $$d && eval echo $$base*`; do \ |
| test -f $(distdir)/$$file \ |
| || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ |
| || cp -p $$d/$$file $(distdir)/$$file; \ |
| done; \ |
| done |
| |
| mostlyclean-aminfo: |
| -rm -f binutils.aux binutils.cp binutils.cps binutils.dvi binutils.fn \ |
| binutils.fns binutils.ky binutils.kys binutils.ps \ |
| binutils.log binutils.pg binutils.toc binutils.tp \ |
| binutils.tps binutils.vr binutils.vrs binutils.op binutils.tr \ |
| binutils.cv binutils.cn |
| |
| clean-aminfo: |
| |
| distclean-aminfo: |
| |
| maintainer-clean-aminfo: |
| for i in $(INFO_DEPS); do \ |
| rm -f $$i; \ |
| if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \ |
| rm -f $$i-[0-9]*; \ |
| fi; \ |
| done |
| clean-info: mostlyclean-aminfo |
| |
| install-man1: |
| $(mkinstalldirs) $(DESTDIR)$(man1dir) |
| @list='$(man1_MANS)'; \ |
| l2='$(man_MANS)'; for i in $$l2; do \ |
| case "$$i" in \ |
| *.1*) list="$$list $$i" ;; \ |
| esac; \ |
| done; \ |
| for i in $$list; do \ |
| if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ |
| else file=$$i; fi; \ |
| ext=`echo $$i | sed -e 's/^.*\\.//'`; \ |
| inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ |
| inst=`echo $$inst | sed '$(transform)'`.$$ext; \ |
| echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ |
| $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ |
| done |
| |
| uninstall-man1: |
| @list='$(man1_MANS)'; \ |
| l2='$(man_MANS)'; for i in $$l2; do \ |
| case "$$i" in \ |
| *.1*) list="$$list $$i" ;; \ |
| esac; \ |
| done; \ |
| for i in $$list; do \ |
| ext=`echo $$i | sed -e 's/^.*\\.//'`; \ |
| inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ |
| inst=`echo $$inst | sed '$(transform)'`.$$ext; \ |
| echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ |
| rm -f $(DESTDIR)$(man1dir)/$$inst; \ |
| done |
| install-man: $(MANS) |
| @$(NORMAL_INSTALL) |
| $(MAKE) $(AM_MAKEFLAGS) install-man1 |
| uninstall-man: |
| @$(NORMAL_UNINSTALL) |
| $(MAKE) $(AM_MAKEFLAGS) uninstall-man1 |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| |
| @SET_MAKE@ |
| |
| all-recursive install-data-recursive install-exec-recursive \ |
| installdirs-recursive install-recursive uninstall-recursive install-info-recursive \ |
| check-recursive installcheck-recursive info-recursive dvi-recursive: |
| @set fnord $(MAKEFLAGS); amf=$$2; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| mostlyclean-recursive clean-recursive distclean-recursive \ |
| maintainer-clean-recursive: |
| @set fnord $(MAKEFLAGS); amf=$$2; \ |
| dot_seen=no; \ |
| rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ |
| rev="$$subdir $$rev"; \ |
| test "$$subdir" = "." && dot_seen=yes; \ |
| done; \ |
| test "$$dot_seen" = "no" && rev=". $$rev"; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| |
| tags: TAGS |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) |
| list='$(SOURCES) $(HEADERS)'; \ |
| unique=`for i in $$list; do echo $$i; done | \ |
| awk ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| here=`pwd` && cd $(srcdir) \ |
| && mkid -f$$here/ID $$unique $(LISP) |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS)'; \ |
| unique=`for i in $$list; do echo $$i; done | \ |
| awk ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(ETAGS_ARGS)config.in$$unique$(LISP)$$tags" \ |
| || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.in $$unique $(LISP) -o $$here/TAGS) |
| |
| mostlyclean-tags: |
| |
| clean-tags: |
| |
| distclean-tags: |
| -rm -f TAGS ID |
| |
| maintainer-clean-tags: |
| |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| -rm -rf $(distdir) |
| GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz |
| mkdir $(distdir)/=build |
| mkdir $(distdir)/=inst |
| dc_install_base=`cd $(distdir)/=inst && pwd`; \ |
| cd $(distdir)/=build \ |
| && ../configure --srcdir=.. --prefix=$$dc_install_base \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist |
| -rm -rf $(distdir) |
| @banner="$(distdir).tar.gz is ready for distribution"; \ |
| dashes=`echo "$$banner" | sed s/./=/g`; \ |
| echo "$$dashes"; \ |
| echo "$$banner"; \ |
| echo "$$dashes" |
| dist: distdir |
| -chmod -R a+r $(distdir) |
| GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) |
| -rm -rf $(distdir) |
| dist-all: distdir |
| -chmod -R a+r $(distdir) |
| GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) |
| -rm -rf $(distdir) |
| distdir: $(DISTFILES) |
| -rm -rf $(distdir) |
| mkdir $(distdir) |
| -chmod 777 $(distdir) |
| @for file in $(DISTFILES); do \ |
| if test -f $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| cp -pr $$d/$$file $(distdir)/$$file; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ |
| || cp -p $$d/$$file $(distdir)/$$file || :; \ |
| fi; \ |
| done |
| for subdir in $(SUBDIRS); do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d $(distdir)/$$subdir \ |
| || mkdir $(distdir)/$$subdir \ |
| || exit 1; \ |
| chmod 777 $(distdir)/$$subdir; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info |
| |
| RUNTESTFLAGS = |
| |
| DEJATOOL = $(PACKAGE) |
| |
| RUNTESTDEFAULTFLAGS = --tool $(DEJATOOL) --srcdir $$srcdir |
| site.exp: Makefile |
| @echo 'Making a new site.exp file...' |
| @test ! -f site.bak || rm -f site.bak |
| @echo '## these variables are automatically generated by make ##' > $@-t |
| @echo '# Do not edit here. If you wish to override these values' >> $@-t |
| @echo '# edit the last section' >> $@-t |
| @echo 'set tool $(DEJATOOL)' >> $@-t |
| @echo 'set srcdir $(srcdir)' >> $@-t |
| @echo 'set objdir' `pwd` >> $@-t |
| @echo 'set host_alias $(host_alias)' >> $@-t |
| @echo 'set host_triplet $(host_triplet)' >> $@-t |
| @echo 'set target_alias $(target_alias)' >> $@-t |
| @echo 'set target_triplet $(target_triplet)' >> $@-t |
| @echo 'set build_alias $(build_alias)' >> $@-t |
| @echo 'set build_triplet $(build_triplet)' >> $@-t |
| @echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t |
| @test ! -f site.exp || sed '1,/^## All variables above are.*##/ d' site.exp >> $@-t |
| @test ! -f site.exp || mv site.exp site.bak |
| @mv $@-t site.exp |
| info-am: $(INFO_DEPS) |
| info: info-recursive |
| dvi-am: $(DVIS) |
| dvi: dvi-recursive |
| check-am: |
| $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU |
| check: check-recursive |
| installcheck-am: |
| installcheck: installcheck-recursive |
| install-info-am: |
| install-info: install-info-recursive |
| all-recursive-am: config.h |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| install-exec-am: install-binPROGRAMS install-exec-local |
| install-exec: install-exec-recursive |
| |
| install-data-am: install-man |
| install-data: install-data-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| install: install-recursive |
| uninstall-am: uninstall-binPROGRAMS uninstall-man |
| uninstall: uninstall-recursive |
| all-am: Makefile $(PROGRAMS) $(MANS) config.h |
| all-redirect: all-recursive-am |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install |
| installdirs: installdirs-recursive |
| installdirs-am: |
| $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(mandir)/man1 |
| |
| |
| mostlyclean-generic: |
| -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -rm -f Makefile $(CONFIG_CLEAN_FILES) |
| -rm -f config.cache config.log stamp-h stamp-h[0-9]* |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| -test -z "arlexldeflexlrclexlarparseharparsecdefparsehdefparsecnlmheaderhnlmheadercrcparsehrcparsec$(MAINTAINERCLEANFILES)" || rm -f arlexl deflexl rclexl arparseh arparsec defparseh defparsec nlmheaderh nlmheaderc rcparseh rcparsec $(MAINTAINERCLEANFILES) |
| mostlyclean-am: mostlyclean-hdr mostlyclean-binPROGRAMS \ |
| mostlyclean-noinstPROGRAMS mostlyclean-compile \ |
| mostlyclean-libtool mostlyclean-aminfo mostlyclean-tags \ |
| mostlyclean-generic mostlyclean-local |
| |
| mostlyclean: mostlyclean-recursive |
| |
| clean-am: clean-hdr clean-binPROGRAMS clean-noinstPROGRAMS \ |
| clean-compile clean-libtool clean-aminfo clean-tags \ |
| clean-generic mostlyclean-am |
| |
| clean: clean-recursive |
| |
| distclean-am: distclean-hdr distclean-binPROGRAMS \ |
| distclean-noinstPROGRAMS distclean-compile \ |
| distclean-libtool distclean-aminfo distclean-tags \ |
| distclean-generic clean-am |
| -rm -f libtool |
| |
| distclean: distclean-recursive |
| -rm -f config.status |
| |
| maintainer-clean-am: maintainer-clean-hdr maintainer-clean-binPROGRAMS \ |
| maintainer-clean-noinstPROGRAMS \ |
| maintainer-clean-compile maintainer-clean-libtool \ |
| maintainer-clean-aminfo maintainer-clean-tags \ |
| maintainer-clean-generic distclean-am |
| @echo "This command is intended for maintainers to use;" |
| @echo "it deletes files that may require special tools to rebuild." |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f config.status |
| |
| .PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ |
| mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ |
| maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ |
| mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \ |
| clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \ |
| mostlyclean-compile distclean-compile clean-compile \ |
| maintainer-clean-compile mostlyclean-libtool distclean-libtool \ |
| clean-libtool maintainer-clean-libtool install-info-am uninstall-info \ |
| mostlyclean-aminfo distclean-aminfo clean-aminfo \ |
| maintainer-clean-aminfo install-man1 uninstall-man1 install-man \ |
| uninstall-man install-data-recursive uninstall-data-recursive \ |
| install-exec-recursive uninstall-exec-recursive installdirs-recursive \ |
| uninstalldirs-recursive all-recursive check-recursive \ |
| installcheck-recursive info-recursive dvi-recursive \ |
| mostlyclean-recursive distclean-recursive clean-recursive \ |
| maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ |
| distclean-tags clean-tags maintainer-clean-tags distdir check-DEJAGNU \ |
| info-am info dvi-am dvi check check-am installcheck-am installcheck \ |
| install-info-am install-info all-recursive-am install-exec-local \ |
| install-exec-am install-exec install-data-am install-data install-am \ |
| install uninstall-am uninstall all-redirect all-am all installdirs-am \ |
| installdirs mostlyclean-generic distclean-generic clean-generic \ |
| maintainer-clean-generic clean mostlyclean distclean maintainer-clean |
| |
| po/POTFILES.in: @MAINT@ Makefile |
| for file in $(POTFILES); do echo $$file; done | sort > tmp \ |
| && mv tmp $(srcdir)/po/POTFILES.in |
| |
| check-DEJAGNU: site.exp |
| srcdir=`cd $(srcdir) && pwd`; export srcdir; \ |
| r=`pwd`; export r; \ |
| EXPECT=$(EXPECT); export EXPECT; \ |
| if [ -f $(top_builddir)/../expect/expect ]; then \ |
| TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd`; \ |
| export TCL_LIBRARY; \ |
| fi; \ |
| runtest=$(RUNTEST); \ |
| if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ |
| $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ |
| CC_FOR_TARGET="$(CC_FOR_TARGET)" \ |
| CFLAGS_FOR_TARGET="$(CFLAGS)" $(RUNTESTFLAGS); \ |
| else echo "WARNING: could not find \`runtest'" 1>&2; :;\ |
| fi |
| |
| installcheck: |
| /bin/sh $(srcdir)/sanity.sh $(bindir) |
| |
| objdump.o:objdump.c |
| $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c |
| |
| underscore.c: stamp-under ; @true |
| |
| stamp-under: Makefile |
| echo '/*WARNING: This file is automatically generated!*/' >underscore.t |
| echo "int prepends_underscore = @UNDERSCORE@;" >>underscore.t |
| $(SHELL) $(srcdir)/../move-if-change underscore.t underscore.c |
| touch stamp-under |
| |
| cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h |
| $(COMPILE) -c -DMAIN -DVERSION='"$(VERSION)"' $(BASEDIR)/libiberty/cplus-dem.c |
| |
| # The following is commented out for the conversion to automake. |
| # This rule creates a single binary that switches between ar and ranlib |
| # by looking at argv[0]. Use this kludge to save some disk space. |
| # However, you have to install things by hand. |
| # (That is after 'make install', replace the installed ranlib by a link to ar.) |
| # Alternatively, you can install ranlib.sh as ranlib. |
| # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o |
| # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) |
| # -rm -f $(RANLIB_PROG) |
| # -ln $(AR_PROG) $(RANLIB_PROG) |
| # |
| # objcopy and strip in one binary that uses argv[0] to decide its action. |
| # |
| #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o |
| # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) |
| # -rm -f $(STRIP_PROG) |
| # -ln $(OBJCOPY_PROG) $(STRIP_PROG) |
| |
| sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info |
| ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c |
| ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c |
| ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c |
| |
| sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info |
| ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h |
| |
| sysinfo$(EXEEXT_FOR_BUILD): sysinfo.o syslex.o |
| $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o |
| |
| syslex.o: syslex.c sysinfo.h |
| if [ -r syslex.c ]; then \ |
| $(CC_FOR_BUILD) -c -I. $(CFLAGS) syslex.c ; \ |
| else \ |
| $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(CFLAGS) $(srcdir)/syslex.c ;\ |
| fi |
| |
| sysinfo.o: sysinfo.c |
| if [ -r sysinfo.c ]; then \ |
| $(CC_FOR_BUILD) -c -I. $(CFLAGS) sysinfo.c ; \ |
| else \ |
| $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \ |
| fi |
| |
| # We need these for parallel make. |
| arparse.h: arparse.c |
| defparse.h: defparse.c |
| nlmheader.h: nlmheader.c |
| rcparse.h: rcparse.c |
| sysinfo.h: sysinfo.c |
| |
| dlltool.o:dlltool.c |
| $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c |
| |
| rescoff.o:rescoff.c |
| $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c |
| |
| # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency |
| # scripts, since they are only included conditionally. |
| nlmconv.o: nlmconv.c $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h |
| ldname=`echo ld | sed '$(transform)'`; \ |
| $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c |
| |
| diststuff: $(DISTSTUFF) info |
| |
| # Targets to rebuild dependencies in this Makefile. |
| # Have to get rid of DEP1 here so that "$?" later includes all of $(CFILES). |
| DEP: dep.sed $(CFILES) $(HFILES) $(GENERATED_CFILES) $(GENERATED_HFILES) config.h |
| rm -f DEP1 |
| $(MAKE) MKDEP="$(MKDEP)" DEP1 |
| sed -f dep.sed < DEP1 > DEPA |
| echo '# IF YOU PUT ANYTHING HERE IT WILL GO AWAY' >> DEPA |
| if grep ' /' DEPA > /dev/null 2> /dev/null; then \ |
| echo 'make DEP failed!'; exit 1; \ |
| else \ |
| mv -f DEPA $@; \ |
| fi |
| |
| DEP1: $(CFILES) $(GENERATED_CFILES) |
| echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > DEP2 |
| echo '# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.' >> DEP2 |
| $(MKDEP) $(INCLUDES) $(CFLAGS) $? >> DEP2 |
| mv -f DEP2 $@ |
| |
| dep.sed: dep-in.sed config.status |
| objdir=`pwd`; \ |
| sed <$(srcdir)/dep-in.sed >dep.sed \ |
| -e 's!@INCDIR@!$(INCDIR)!' \ |
| -e 's!@BFDDIR@!$(BFDDIR)!' \ |
| -e 's!@SRCDIR@!$(srcdir)!' \ |
| -e "s!@OBJDIR@!$${objdir}!" |
| |
| dep: DEP |
| sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile |
| cat DEP >> tmp-Makefile |
| $(SHELL) $(srcdir)/../move-if-change tmp-Makefile Makefile |
| |
| dep-in: DEP |
| sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in |
| cat DEP >> tmp-Makefile.in |
| $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in |
| |
| dep-am: DEP |
| sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am |
| cat DEP >> tmp-Makefile.am |
| $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am |
| |
| .PHONY: dep dep-in dep-am |
| |
| ### |
| # DOCUMENTATION TARGETS |
| config.texi: Makefile |
| rm -f config.texi |
| echo '@set VERSION $(VERSION)' > config.texi |
| |
| binutils.dvi: $(srcdir)/binutils.texi config.texi |
| |
| binutils.info: $(srcdir)/binutils.texi config.texi |
| |
| $(DEMANGLER_NAME).1: cxxfilt.man Makefile |
| sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' < $(srcdir)/cxxfilt.man \ |
| > $(DEMANGLER_NAME).1 |
| mostlyclean-local: |
| -rm -rf tmpdir |
| |
| .PHONY: install-exec-local |
| |
| install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS) |
| @list='$(noinst_PROGRAMS)'; for p in $$list; do \ |
| if test -f $$p; then \ |
| echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ |
| $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ |
| else :; fi; \ |
| done |
| $(mkinstalldirs) $(tooldir)/bin |
| for i in $(TOOL_PROGS); do \ |
| if [ -f $$i$(EXEEXT) ]; then \ |
| j=`echo $$i | sed -e 's/-new//'`; \ |
| k=`echo $$j | sed '$(transform)'`; \ |
| if [ "$(bindir)/$$k$(EXEEXT)" != "$(tooldir)/bin/$$j$(EXEEXT)" ]; then \ |
| rm -f $(tooldir)/bin/$$j$(EXEEXT); \ |
| ln $(bindir)/$$k$(EXEEXT) $(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \ |
| || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(tooldir)/bin/$$j$(EXEEXT); \ |
| fi; \ |
| else true; \ |
| fi; \ |
| done |
| |
| # What appears below is generated by a hacked mkdep using gcc -MM. |
| |
| # DO NOT DELETE THIS LINE -- mkdep uses it. |
| # DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY. |
| addr2line.o: addr2line.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| $(INCDIR)/getopt.h $(INCDIR)/libiberty.h $(INCDIR)/demangle.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h |
| ar.o: ar.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \ |
| $(INCDIR)/progress.h bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(INCDIR)/aout/ar.h $(BFDDIR)/libbfd.h \ |
| arsup.h $(INCDIR)/filenames.h |
| arsup.o: arsup.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| arsup.h $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h |
| bucomm.o: bucomm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h |
| coffdump.o: coffdump.c coffgrok.h bucomm.h config.h \ |
| $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h |
| coffgrok.o: coffgrok.c bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h \ |
| $(INCDIR)/bfdlink.h coffgrok.h |
| debug.o: debug.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h debug.h |
| dlltool.o: dlltool.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h $(INCDIR)/demangle.h \ |
| $(INCDIR)/dyn-string.h dlltool.h |
| filemode.o: filemode.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h |
| ieee.o: ieee.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/ieee.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h debug.h budbg.h $(INCDIR)/filenames.h |
| is-ranlib.o: is-ranlib.c |
| is-strip.o: is-strip.c |
| maybe-ranlib.o: maybe-ranlib.c |
| maybe-strip.o: maybe-strip.c |
| nlmconv.o: nlmconv.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(BFDDIR)/libnlm.h $(INCDIR)/nlm/common.h \ |
| $(INCDIR)/nlm/internal.h $(INCDIR)/nlm/external.h nlmconv.h |
| nm.o: nm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/progress.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/getopt.h $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def \ |
| $(INCDIR)/aout/ranlib.h $(INCDIR)/demangle.h $(INCDIR)/libiberty.h |
| not-ranlib.o: not-ranlib.c |
| not-strip.o: not-strip.c |
| objcopy.o: objcopy.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| $(INCDIR)/progress.h bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h $(INCDIR)/libiberty.h \ |
| budbg.h $(INCDIR)/filenames.h |
| objdump.o: objdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| $(INCDIR)/getopt.h $(INCDIR)/progress.h bucomm.h config.h \ |
| $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h $(INCDIR)/dis-asm.h \ |
| $(INCDIR)/libiberty.h $(INCDIR)/demangle.h debug.h \ |
| budbg.h $(INCDIR)/aout/aout64.h |
| prdbg.o: prdbg.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h debug.h budbg.h |
| rdcoff.o: rdcoff.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| $(INCDIR)/coff/internal.h bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h $(INCDIR)/demangle.h \ |
| debug.h budbg.h $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h |
| rddbg.o: rddbg.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h debug.h budbg.h |
| size.o: size.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/getopt.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h |
| srconv.o: srconv.c bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h sysroff.h coffgrok.h $(INCDIR)/coff/internal.h \ |
| $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h sysroff.c |
| stabs.o: stabs.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h $(INCDIR)/demangle.h debug.h \ |
| budbg.h $(INCDIR)/aout/aout64.h $(INCDIR)/aout/stab_gnu.h \ |
| $(INCDIR)/aout/stab.def |
| strings.o: strings.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h |
| sysdump.o: sysdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| sysroff.h sysroff.c |
| version.o: version.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h |
| wrstabs.o: wrstabs.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h debug.h budbg.h $(INCDIR)/aout/aout64.h \ |
| $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def |
| windres.o: windres.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| $(INCDIR)/getopt.h bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h $(INCDIR)/obstack.h \ |
| windres.h winduni.h |
| resrc.o: resrc.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h windres.h winduni.h |
| rescoff.o: rescoff.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h windres.h winduni.h $(INCDIR)/coff/internal.h \ |
| $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h |
| resbin.o: resbin.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h windres.h winduni.h |
| winduni.o: winduni.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| winduni.h |
| readelf.o: readelf.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| $(INCDIR)/elf/common.h $(INCDIR)/elf/external.h $(INCDIR)/elf/internal.h \ |
| $(INCDIR)/elf/dwarf2.h $(INCDIR)/elf/i386.h $(INCDIR)/elf/reloc-macros.h \ |
| $(INCDIR)/elf/v850.h $(INCDIR)/elf/ppc.h $(INCDIR)/elf/mips.h \ |
| $(INCDIR)/elf/alpha.h $(INCDIR)/elf/arm.h $(INCDIR)/elf/m68k.h \ |
| $(INCDIR)/elf/sparc.h $(INCDIR)/elf/m32r.h $(INCDIR)/elf/d10v.h \ |
| $(INCDIR)/elf/d30v.h $(INCDIR)/elf/sh.h $(INCDIR)/elf/mn10200.h \ |
| $(INCDIR)/elf/mn10300.h $(INCDIR)/elf/hppa.h $(INCDIR)/elf/arc.h \ |
| $(INCDIR)/elf/fr30.h $(INCDIR)/elf/mcore.h $(INCDIR)/elf/i960.h \ |
| $(INCDIR)/elf/pj.h $(INCDIR)/elf/avr.h $(INCDIR)/elf/ia64.h \ |
| $(INCDIR)/elf/cris.h bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h |
| resres.o: resres.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h windres.h winduni.h |
| dllwrap.o: dllwrap.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/bin-bugs.h \ |
| $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h $(INCDIR)/dyn-string.h |
| rename.o: rename.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h |
| underscore.o: underscore.c |
| arparse.o: arparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| arsup.h |
| arlex.o: arlex.c $(INCDIR)/libiberty.h arparse.h |
| sysroff.o: sysroff.c |
| sysinfo.o: sysinfo.c |
| syslex.o: syslex.c sysinfo.h |
| defparse.o: defparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| dlltool.h |
| deflex.o: deflex.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \ |
| defparse.h dlltool.h |
| nlmheader.o: nlmheader.c ../bfd/bfd.h bucomm.h config.h \ |
| $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h $(INCDIR)/nlm/common.h \ |
| $(INCDIR)/nlm/internal.h nlmconv.h |
| rcparse.o: rcparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h windres.h winduni.h |
| rclex.o: rclex.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ |
| bucomm.h config.h $(INCDIR)/bin-bugs.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/libiberty.h windres.h winduni.h rcparse.h |
| # IF YOU PUT ANYTHING HERE IT WILL GO AWAY |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
