2009-05-28  DJ Delorie  <dj@redhat.com>

	* mep-asm.c: Regenerate.
	* mep-desc.c: Regenerate.

2009-05-26  DJ Delorie  <dj@redhat.com>

	* mep-asm.c: Regenerate.
	* mep-desc.c: Regenerate.
	* mep-desc.h: Regenerate.
	* mep-dis.c: Regenerate.
	* mep-ibld.c: Regenerate.
	* mep-opc.c: Regenerate.
	* mep-opc.h: Regenerate.

2009-05-26  Nick Clifton  <nickc@redhat.com>

	* po/id.po: Updated Indonesian translation.
	* po/opcodes.pot: Updated template file.

2009-05-26  Alan Modra  <amodra@bigpond.net.au>

	* dep-in.sed: Don't modify .o to .lo here.  Output one filename
	per line with all lines having continuation backslash.  Prefix
	first line with "A", following lines with "B".
	* Makefile.am (DEP): Don't use dep.sed here.
	(DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
	dep.sed here on dependencies, sort and uniq.
	* Makefile.in: Regenerate.

2009-05-25  Tristan Gingold  <gingold@adacore.com>

	* makefile.vms (OPT): New variable.
	(CFLAGS): Update compilation flags.

2009-05-22  DJ Delorie  <dj@redhat.com>

	* mep-asm.c: Regenerate.
	* mep-desc.c: Regenerate.
	* mep-desc.h: Regenerate.
	* mep-dis.c: Regenerate.
	* mep-ibld.c: Regenerate.
	* mep-opc.c: Regenerate.
	* mep-opc.h: Regenerate.

2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>

	* i386-opc.h (Cpusse5): Delete.
	(i386_cpu_flags): Delete.
	* i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
	* i386-opc.tbl: Remove SSE5 instructions.
	* i386-tbl.h: Regenerate.
	* i386-init.h: Regenerate.
	* i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
	(print_drex_arg): Delete.
	(OP_DREX4): Delete.
	(OP_DREX3): Delete.
	(OP_DREX_ICMP): Delete.
	(OP_DREX_FCMP): Delete.
	(DREX_*): Delete.
	(THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
	
2009-05-22  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.

2009-05-19  DJ Delorie  <dj@redhat.com>

	* mep-asm.c: Regenerate.
	* mep-opc.c: Regenerate.

2009-04-30  DJ Delorie  <dj@redhat.com>

	* mep-asm.c: Regenerate.
	* mep-desc.c: Regenerate.
	* mep-desc.h: Regenerate.
	* mep-dis.c: Regenerate.
	* mep-ibld.c: Regenerate.
	* mep-opc.c: Regenerate.
	* mep-opc.h: Regenerate.

2009-04-17  DJ Delorie  <dj@redhat.com

	* mep-desc.c: Regenerate.
	* mep-ibld.c: Regenerate.
	* mep-opc.c: Regenerate.
	* mep-opc.h: Regenerate.

2009-04-15  Anthony Green  <green@moxielogic.com>

	* moxie-opc.c, moxie-dis.c: Created.
	* Makefile.am: Build the moxie source files.
	* configure.in: Add moxie support.
	* Makefile.in, configure: Rebuilt.
	* disassemble.c (disassembler): Add moxie support.
	(ARCH_moxie): Define.

2009-04-15  Jan Beulich  <jbeulich@novell.com>

	* i386-opc.tbl (protb, protw, protd, protq): Set opcode
	extension to None.
	(pshab, pshaw, pshad, pshaq): Likewise.
	* i386-tbl.h: Re-generate.

2009-04-08  DJ Delorie  <dj@redhat.com

	* mep-asm.c: Regenerate.
	* mep-desc.c: Regenerate.
	* mep-desc.h: Regenerate.
	* mep-dis.c: Regenerate.
	* mep-ibld.c: Regenerate.
	* mep-opc.c: Regenerate.
	* mep-opc.h: Regenerate.

2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
	"tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
	Reorder entries so the extended mnemonics are listed before tlbilx.

2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
	due to -many/-Many.
	(print_insn_powerpc): Make sure we only deprecate instructions using
	the original dialect and not a modified dialect due to -Many handling.
	Move the handling of the condition register and default operands to
	the end of the if/else if/else chain.
	* ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
	instructions from newer processors are listed before older ones.
	<"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
	that have instructions with conflicting opcodes.

2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
	E500MC entries.

2009-04-01  Christophe Lyon  <christophe.lyon@st.com>

	* arm-dis.c (print_insn): Print BE8 opcodes in little endianness.

2009-03-30  Joseph Myers  <joseph@codesourcery.com>

	* arm-dis.c (print_insn): Also check section matches in backwards
	search for mapping symbol.

2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (get_valid_dis386): Abort on unhandled table.

2009-03-18  Alan Modra  <amodra@bigpond.net.au>

	* cgen-opc.c: Include alloca-conf.h rather than alloca.h.
	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* openrisc-opc.c: Regenerate.

2009-03-10  Nick Clifton  <nickc@redhat.com>

	* po/id.po: Updated Indonesian translation.

2009-03-10  Alan Modra  <amodra@bigpond.net.au>

	* ppc-dis.c: Include "opintl.h".
	(struct ppc_mopt, ppc_opts): New.
	(ppc_parse_cpu): New function.
	(powerpc_init_dialect): Use it.
	(print_ppc_disassembler_options): Dump options from ppc_opts.
	Internationalize message.

2009-03-06  Nick Clifton  <nickc@redhat.com>

	* po/es.po: Updated Spanish translation.

2009-03-04  Alan Modra  <amodra@bigpond.net.au>

	PR 6768
	* configure.in: Test for ld --as-needed support.  Link shared
	libopcodes against libm.
	* configure: Regenerate.

2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
	instructions from newer processors are listed before older ones.

2009-03-03  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	(HFILES): Move lm32-desc.h and lm32-opc.h from..
	(CFILES): ..here.
	* Makefile.in: Regenerate.

2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>

	* score7-dis.c: New file.
	* Makefile.am: Add dependencies for score7-dis.c.
	* Makefile.in: Regenerate.
	* configure.in: Add score7-dis to score files.
	* configure: Regenerate.
	* score-dis.c: Add support for score7 architecture.
	* score-opc.h: Likewise.

2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* configure: Regenerate.

2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.

2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
	the power7 and the isel instructions.
	* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
	(insert_dm, extract_dm): Likewise.
	(XB6): Update comment to include XX2 form.
	(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
	XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
	(RemoveXX3DM): Delete.
	(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
	"mftgpr">: Deprecate for POWER7.
	<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
	"frsqrte.">: Deprecate the three operand form and enable the two
	operand form for POWER7 and later.
	<"wait">: Extend to accept optional parameter.  Enable for POWER7.
	<"waitsrv", "waitimpl">: Add extended opcodes.
	<"ldbrx", "stdbrx">: Enable for POWER7.
	<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
	<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
	"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
	"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
	"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
	"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
	"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
	"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
	<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
	"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
	"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
	"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
	"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
	"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
	"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
	"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
	"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
	"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
	"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
	"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
	"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
	"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
	"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
	"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
	"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
	"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
	"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
	"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
	"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
	"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
	"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
	"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
	"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
	"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
	"xxspltw", "xxswapd">: Add VSX opcodes.

2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
	(operand_types): Remove Vex_Imm4.

	* i386-opc.h (Vex_Imm4): Removed.
	(OTMax): Updated.
	(i386_operand_type): Remove vex_imm4.

	* i386-opc.tbl: Remove Vex_Imm4 comments.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2009-02-23  Richard Earnshaw  <rearnsha@arm.com>

	* arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
	vq{r}shr{u}n.s64 insnstructions.

2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
	operand to be a float point register (FRT/FRS).

2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>

	* mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
	dmfc2 and dmtc2 before the architecture-level variants.

2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>

	* fr30-opc.c: Regenerate.
	* frv-opc.c: Regenerate.
	* ip2k-opc.c: Regenerate.
	* iq2000-opc.c: Regenerate.
	* lm32-opc.c: Regenerate.
	* m32c-opc.c: Regenerate.
	* m32r-opc.c: Regenerate.
	* mep-opc.c: Regenerate.
	* mt-opc.c: Regenerate.
	* xc16x-opc.c: Regenerate.
	* xstormy16-opc.c: Regenerate.
	* tic54x-dis.c (print_instruction): Avoid compiler warning on
	sprintf call.

2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>

	* m68k-opc.c (m68k_opcodes): Add stldsr instruction.

2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c: Update copyright year.
	(powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
	ordering for POWER4 and later and use the correct Server ordering.

2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>

	AVX Programming Reference (January, 2009)
	* i386-dis.c (PREFIX_VEX_3A44): New.
	(VEX_LEN_3A44_P_2): Likewise.
	(PREFIX_VEX_3A48): Updated.
	(VEX_LEN_3A4C_P_2): Likewise.
	(prefix_table): Add PREFIX_VEX_3A44.
	(vex_table): Likewise.
	(vex_len_table): Add VEX_LEN_3A44_P_2.

	* i386-opc.tbl: Add PCLMUL + AVX instructions.
	* i386-tbl.h: Regenerated.

2009-02-03  Sandip Matte  <sandip@rmicorp.com>

	* mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
	(mips_arch_choices): Add XLR entry.
	* mips-opc.c (XLR): Define.
	(mips_builtin_opcodes): Add XLR instructions.

2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.am: Add install-pdf target.
	* po/Make-in: Add install-pdf target.
	* Makefile.in: Regenerate.

2009-02-02  DJ Delorie  <dj@redhat.com>

	* mep-asm.c: Regenerate.
	* mep-desc.c: Regenerate.
	* mep-desc.h: Regenerate.
	* mep-dis.c: Regenerate.
	* mep-ibld.c: Regenerate.
	* mep-opc.c: Regenerate.
	* mep-opc.h: Regenerate.

2009-01-29  Mark Mitchell  <mark@codesourcery.com>

	* arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
	qsub, and qdsub.

2009-01-28  Chao-ying Fu  <fu@mips.com>

        * mips-opc.c (suxc1): Add the flag of FP_D.

2009-01-20  Alan Modra  <amodra@bigpond.net.au>

	* fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
	* frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
	* iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
	* m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
	* m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
	* mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
	* openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
	* xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.

2009-01-16  Alan Modra  <amodra@bigpond.net.au>

	* configure.in (commonbfdlib): Delete.
	(SHARED_LIBADD): Add pic libiberty if such is available.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
	* ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
	operand form and enable the four operand form for POWER6 and later.
	<mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
	three operand form for POWER6 and later.

2009-01-14  Mike Frysinger  <vapier@gentoo.org>

	* bfin-dis.c (OUTS): Use "%s" as format string.

2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Remove a white space.
	(operand_type_init): Likewise.

2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
	* i386-tbl.h: Regenerated.

2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
	subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
	subS, xorS and cmpS.

2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
	CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
	CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
	(cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
	and CpuSYSCALL.
	(lineno): Removed.
	(set_bitfield): Take an argument, lineno.  Don't report lineno
	on error if it is -1.
	(process_i386_cpu_flag): Take an argument, lineno.
	(process_i386_opcode_modifier): Likewise.
	(process_i386_operand_type): Likewise.
	(output_i386_opcode): Likewise.
	(opcode_hash_entry): Add lineno.
	(process_i386_opcodes): Updated.
	(process_i386_registers): Likewise.
	(process_i386_initializers): Likewise.

	* i386-opc.h (CpuP4): Removed.
	(CpuK6): Likewise.
	(CpuK8): Likewise.
	(CpuClflush): New.
	(CpuSYSCALL): Likewise.
	(CpuMMX): Updated.
	(i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
	cpuclflush and cpusyscall.

	* i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
	syscall and sysret.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
	and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
	(cpu_flags): Add CpuRdtscp.
	(set_bitfield): Remove CpuSledgehammer check.

	* i386-opc.h (CpuRdtscp): New.
	(CpuLM): Updated.
	(i386_cpu_flags): Add cpurdtscp.

	* i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c (PPCNONE): Define.
	(NOPOWER4): Delete.
	(powerpc_opcodes): Initialize the new "deprecated" field.

2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>

	AVX Programming Reference (December, 2008)
	* i386-dis.c (VEX_LEN_2B_M_0): Removed.
	(VEX_LEN_E7_P_2_M_0): Likewise.
	(VEX_LEN_2C_P_1): Updated.
	(VEX_LEN_E8_P_2): Likewise.
	(vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
	(mod_table): Likewise.

	* i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
	* i386-tbl.h: Regenerated.

2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (process_copyright): Update for 2009.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>

	AVX Programming Reference (December, 2008)
	* i386-dis.c (OP_VEX_FMA): Removed.
	(OP_EX_VexW): Likewise.
	(OP_EX_VexImmW): Likewise.
	(OP_XMM_VexW): Likewise.
	(VEXI4_Fixup): Likewise.
	(VPERMIL2_Fixup): Likewise.
	(VexI4): Likewise.
	(VexFMA): Likewise.
	(Vex128FMA): Likewise.
	(EXVexW): Likewise.
	(EXdVexW): Likewise.
	(EXqVexW): Likewise.
	(EXVexImmW): Likewise.
	(XMVexW): Likewise.
	(VPERMIL2): Likewise.
	(PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
	(PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
	(PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
	(PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
	(VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
	(VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
	(get_vex_imm8): Likewise.
	(OP_EX_VexReg): Likewise.
	vpermil2_op): Likewise.
	(EXVexWdq): New.
	(vex_w_dq_mode): Likewise.
	(PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
	(PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
	(PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
	(es_reg): Updated.
	(PREFIX_VEX_38DB): Likewise.
	(PREFIX_VEX_3A4A): Likewise.
	(PREFIX_VEX_3A60): Likewise.
	(PREFIX_VEX_3ADF): Likewise.
	(VEX_LEN_3ADF_P_2): Likewise.
	(prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
	PREFIX_VEX_3A5C...PREFIX_VEX_3A5F, 
	PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
	PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
	PREFIX_VEX_3896...PREFIX_VEX_389F,
	PREFIX_VEX_38A6...PREFIX_VEX_38AF and
	PREFIX_VEX_38B6...PREFIX_VEX_38BF.
	(vex_table): Likewise.
	(vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
	and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
	(putop): Support "%XW".
	(intel_operand_size): Handle vex_w_dq_mode.

	* i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.

	* i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
	instructions.  Add new FMA instructions.
	* i386-tbl.h: Regenerated.

2009-01-02  Matthias Klose  <doko@ubuntu.com> 

	* or32-opc.c (or32_print_register, or32_print_immediate, 
	disassemble_insn): Don't rely on undefined sprintf behaviour. 

For older changes see ChangeLog-2008

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: