| 2008-02-26 Nick Roberts <nickrob@snap.net.nz> |
| |
| * breakpoint.c (print_one_breakpoint_location): Revert Enb field |
| to old format. Discard breakpoint address if shared library is |
| unloaded. |
| (breakpoint_1): Adjust formatting of table header accordingly. |
| |
| 2008-02-25 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * remote.c (remote_get_threadlist): If the response |
| is empty, don't try to parse it. |
| |
| 2008-02-23 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Unbreak 'target async'. |
| * serial.c (serial_async): Set the |
| handler function before enabling async |
| mode. |
| |
| 2008-02-22 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * solib-svr4.c (enable_break): Convert r_brk to a code address. |
| |
| 2008-02-21 Pedro Alves <pedro@codesourcery.com> |
| |
| * remote.c (extended_remote_attach_1): Set attach_flag. |
| (extended_remote_create_inferior_1): Clear attach_flag. |
| |
| 2008-02-20 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Set |
| r_brk_offset. |
| (mipsnbsd_lp64_fetch_link_map_offsets): Likewise. |
| * solib-svr4.c (solib_svr4_r_brk): New. |
| (open_symbol_file_object, svr4_current_sos): Always check the |
| debug base. |
| (svr4_fetch_objfile_link_map): Do not set debug_base. |
| (enable_break): Use r_brk if it is set. |
| (svr4_ilp32_fetch_link_map_offsets): Set r_brk_offset. |
| (svr4_lp64_fetch_link_map_offsets): Likewise. |
| * solib-svr4.h (struct link_map_offsets): Add r_brk_offset. |
| |
| 2008-02-20 Markus Deuling <deuling@de.ibm.com> |
| Mark Kettenis <kettenis@gnu.org> |
| |
| * alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by |
| trad_frame_saved_reg. |
| (trad-frame.h): New include. |
| |
| (alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs |
| instead of frame_obstack_zalloc. |
| (alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register. |
| |
| * Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h. |
| |
| 2008-02-20 Markus Deuling <deuling@de.ibm.com> |
| |
| * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess |
| from disassemble_info instead of gdbarch_byte_order. |
| |
| * mips-tdep.c (gdb_print_insn_mips): Likewise. |
| * arm-tdep.c (gdb_print_insn_arm): Likewise. |
| |
| 2008-02-20 Markus Deuling <deuling@de.ibm.com> |
| |
| * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add |
| gdbarch as parameter. |
| |
| * gdbarch.{c,h}: Regenerate. |
| |
| * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as |
| parameter. |
| * mem-break.c (default_memory_insert_breakpoint) |
| (default_memory_remove_breakpoint): Likewise. |
| * target.h (default_memory_remove_breakpoint) |
| (default_memory_insert_breakpoint): Likewise. |
| |
| * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as |
| parameter. Replace current_gdbarch by gdbarch. |
| * m32r-tdep.c (m32r_memory_insert_breakpoint) |
| (m32r_memory_remove_breakpoint): Likewise. |
| |
| 2008-02-19 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * MAINTAINERS: Add Vladimir Prus as MI maintainer. |
| |
| 2008-02-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Add entry describing Add support improvements. |
| |
| 2008-02-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by |
| M68K_FP0_REGNUM. |
| |
| 2008-02-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * sentinel-frame.c (sentinel_frame_prev_register): Do not call |
| register_offset_hack anymore. |
| |
| * regcache.{c,h} (register_offset_hack): Remove. |
| |
| 2008-02-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * hppa-tdep.h (find_global_pointer): Add gdbarch as parameter. |
| |
| * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace |
| current_gdbarch by gdbarch. |
| (hppa64_hpux_find_global_pointer): Likewise. |
| * hppa-tdep.c (hppa_find_global_pointer): Likewise. |
| (hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for |
| find_global_pointer. |
| |
| * hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as |
| parameter. |
| * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise. |
| |
| * hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead |
| of gdbarch_num_regs. |
| |
| * hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and |
| replace current_gdbarch by gdbarch. |
| (hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr. |
| |
| 2008-02-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter |
| and replace current_gdbarch by gdbarch. |
| |
| (store_register): Update call for exec_one_dummy_insn. |
| (fetch_register, store_register): Update call of regmap. |
| |
| * ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as |
| parameter and replace current_gdbarch by gdbarch. |
| |
| (ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at |
| the current architecture. Update call for getregs_supplies and |
| getfpregs_supplies. |
| (ppcnbsd_fetch_inferior_registers): Likewise. |
| |
| * ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and |
| replace current_gdbarch by gdbarch. |
| (ppcobsd_fetch_registers, ppcobsd_store_registers): Use |
| get_regcache_arch to get at the current architecture. Update call for |
| getfpregs_supplies. |
| |
| 2008-02-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch |
| variables. |
| |
| 2008-02-15 Markus Deuling <deuling@de.ibm.com> |
| |
| * mips-linux-tdep.c (mips_linux_init_abi): Remove internal error. |
| |
| 2008-02-14 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * NEWS: Mention pending breakpints in MI. |
| |
| 2008-02-14 Markus Deuling <deuling@de.ibm.com> |
| |
| * Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o. |
| |
| 2008-02-13 Markus Deuling <deuling@de.ibm.com> |
| |
| Add script to build and test GDB using enable-targets=all. |
| |
| * gdb_buildall.sh: New file. |
| |
| 2008-02-11 Maxim Grigoriev <maxim2405@gmail.com> |
| |
| * NEWS (New native configurations): Xtensa GNU/Linux. |
| (New targets): Xtensa GNU/Linux. |
| * Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and |
| xtensa-linux-tdep.o |
| (ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c |
| (xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies. |
| * configure.tgt (xtensa*-*-linux*): New entry. |
| * xtensa-config.c (xtensa_tdep): New variable. |
| (xtensa_config_byte_order, xtensa_config_tdep): Removed. |
| (rmap): Change format based on new macro XTREG. |
| (XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h. |
| * xtensa-linux-nat.c: New. |
| * xtensa-linux-tdep.c: New. |
| * xtensa-xtregs.c: New. |
| * xtensa-tdep.h (xtensa_elf_gregset_t): Update. |
| (XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE) |
| (XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros. |
| (xtensa_register_t): New field coprocessor. |
| (XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected. |
| * xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed. |
| (xtensa_pseudo_register_read, xtensa_pseudo_register_write): |
| Update to handle privileged registers. |
| (xtensa_supply_gregset) Remove exccause and excvaddr registers. |
| (xtensa_push_dummy_call): Set windowstart register correctly. |
| (call0_analyze_prologue): Initialize xtensa_default_isa. |
| (xtensa_derive_tdep): New. |
| (xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and |
| xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead. |
| Call xtensa_derive_tdep(). |
| * config/xtensa/linux.mh: New. |
| * regformats/reg-xtensa.dat: New. |
| |
| 2008-02-09 Aleksandar Ristovski <aristovski@qnx.com> (tiny change) |
| |
| * corelow.c (core_open): Use IS_ABSOLUTE_PATH. |
| (filenames.h): New include. |
| * Makefile.in (corelow.o): Add dependency for filenames.h. |
| |
| 2008-02-08 Doug Evans <dje@google.com> |
| |
| * source.c (find_and_open_source): Always rewrite absolute filenames. |
| |
| 2008-02-07 Doug Evans <dje@google.com> |
| |
| * breakpoint.c: #include "hashtab.h". |
| (ambiguous_names_p): New fn. |
| (update_breakpoint_locations): When restoring bp enable status, don't |
| compare function names if any functions have same name. |
| * Makefile.in (breakpoint.o): Add hashtab.h dependency. |
| |
| 2008-02-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (symbol_completion_add): Make SV parameter a VEC** |
| instead of just a VEC*. Update use of SV. |
| (ada_make_symbol_completion_list): Update symbol_completion_add calls. |
| |
| 2007-02-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Put all new commands since gdb-6.7 together. |
| |
| 2007-02-07 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c: #include "vec.h". |
| (struct string_vector, new_string_vector, string_vector_append): |
| Delete. |
| (char_ptr): New typedef. |
| (DEF_VEC_P (char_ptr)): New VEC type. |
| (symbol_completion_add): Update profile to take the new VEC type |
| instead of the old string_vector structure. Update code accordingly. |
| (ada_make_symbol_completion_list): Use the new VEC type instead of |
| the old string_vector structure, and update the code accordingly. |
| * Makefile.in (ada-lang.o): Add dependency on vec.h. |
| |
| 2008-02-06 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * p-exp.y: Set current_type in missing places. |
| (leftdiv_is_integer): New static variable. |
| Typecast right operand of BINOP_DIV to long_double if both operands |
| are integers. |
| |
| 2008-02-06 Maciej W. Rozycki <macro@mips.com> |
| |
| * remote-mips.c (set_breakpoint): Rename to... |
| (mips_set_breakpoint): ... this. |
| (clear_breakpoint): Rename to... |
| (mips_clear_breakpoint): ... this. |
| (common_breakpoint): Rename to... |
| (mips_common_breakpoint): ... this. |
| (check_lsi_error): Rename to... |
| (mips_check_lsi_error): ... this. |
| |
| 2007-02-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * language.h (struct language_defn): Add new field |
| la_make_symbol_completion_list. |
| * symtab.c (default_make_symbol_completion_list): Renames |
| make_symbol_completion_list. |
| (make_symbol_completion_list): New function. |
| * symtab.h (default_make_symbol_completion_list): Add declaration. |
| * langauge.c (unknown_language): Set la_make_symbol_completion_list. |
| (auto_language, local_language): Likewise. |
| * objc-lang.c (objc_language_defn): Likewise. |
| * scm-lang.c (scm_language_defn): Likewise. |
| * m2-lang.c (m2_language_defn): Likewise. |
| * f-lang.c (f_language_defn): Likewise. |
| * jv-lang.c (java_language_defn): Likewise. |
| * p-lang.c (pascal_language_defn): Likewise. |
| * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn) |
| (minimal_language_defn): Likewise. |
| * ada-lang.c (struct string_vector): New structure. |
| (new_string_vector, string_vector_append, ada_unqualified_name) |
| (add_angle_brackets, symbol_completion_match, symbol_completion_add) |
| (ada_make_symbol_completion_list): New functions. |
| (ada_language_defn): Set la_make_symbol_completion_list. |
| * ada-lang.h (ada_make_symbol_completion_list): Remove declaration, |
| this function is static. |
| |
| 2008-02-05 Kevin Buettner <kevinb@redhat.com> |
| |
| * mn10300-tdep.c (mn10300_push_dummy_call): Adjust stack pointer |
| to account for call site optimizations. |
| |
| 2008-02-05 Andrzej Zaborowski <balrogg@gmail.com> |
| |
| * tracepoint.c (read_actions): Handle end-of-text indicator |
| in action list properly. (Committed by Jim Blandy) |
| |
| 2008-02-05 Jim Blandy <jimb@red-bean.com> |
| |
| * ax-gdb.c (gen_expr): Yield ordinary error if asked to trace a |
| pseudoregister, not an internal error. |
| Reported by: Andrzej Zaborowski |
| |
| 2008-02-04 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * varobj.c (c_value_of_variable): Use xstrdup. |
| |
| 2008-02-04 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Update stored rendition of varobj value when format changes. |
| * varobj.c (varobj_set_display_format): Recomputed |
| print_value. |
| (c_value_of_variable): Return print_value. |
| |
| 2008-02-03 Doug Evans <dje@google.com> |
| |
| * eval.c (evaluate_subexp_standard): Fix type of result of mixed |
| integer/float division operations when EVAL_AVOID_SIDE_EFFECTS. |
| * valops.c (value_one): New function. |
| * value.h (value_one): Declare. |
| |
| Fix argument promotion for binary arithmetic ops for C. |
| * valarith.c (unop_result_type): New fn. |
| (binop_result_type): New fn. |
| (value_binop): Move result type computation to binop_result_type. |
| (value_pos, value_neg, value_complement): Move result type |
| computation to unop_result_type. |
| |
| PR 2384 |
| * gdbtypes.c (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno. |
| Return basetype, fieldno if found. All callers updated. |
| Don't cache TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE if from different |
| objfile. |
| * gdbtypes.h (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno. |
| * symfile.h (fill_in_vptr_fieldno): Delete. |
| |
| 2008-02-02 Doug Evans <dje@google.com> |
| |
| * valarith.c (value_binop): Handle unsigned BINOP_REM division by zero. |
| |
| * typeprint.c (*): Whitespace cleanup. |
| |
| 2008-02-02 Mark Kettenis <kettenis@gnu.org> |
| Luis Machado <luisgpm@br.ibm.com> |
| Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that |
| don't fit into registerson the stack the way GCC does. |
| |
| 2008-02-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * symtab.c (symbol_set_names): Do not add an entry in the demangling |
| hash table for Ada symbols. Just store the linkage name as is, |
| and leave the demangled_name as NULL. |
| |
| 2007-02-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * dwarf2read.c (add_partial_symbol): Always store all Ada subprograms |
| in the global scope. |
| (new_symbol): Likewise. |
| |
| 2008-02-01 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * breakpoint.c (break_command_1): Return void. |
| (break_command_really): Return void. Rethrow |
| exceptions instead of returning. |
| (gdb_breakpoint): Remove the error_message parameter. |
| Return void. Rename to set_breakpoint. |
| * gdb.h (gdb_breakpoint): Rename and move to... |
| * breakpoint.h (set_breakpoint): ...here. |
| * mi/mi-cmb-break.c (mi_cmd_break_insert): Restore |
| event hooks even if exception is thrown. Adjust to |
| gdb_breakpoint interface changes. |
| |
| |
| 2008-02-01 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Write 32-bit |
| float in both first and second word in the doubleword, to support |
| old and new ABIs. |
| |
| 2008-02-01 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Properly rethrow exception. This fixes errors |
| about non-existent functions for -break-insert. |
| * breakpoint.c (break_command_really): Use throw_exception |
| for rethrowing. If rethrowing, don't print the exception. |
| |
| 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * NEWS: Mention Decimal Floating Point support. |
| |
| 2008-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| * std-regs.c (value_of_builtin_frame_pc_reg): Change the returned |
| value type to builtin_type_void_func_ptr. |
| |
| 2008-01-31 Andreas Krebbel <krebbel1@de.ibm.com> |
| |
| * s390-tdep.c (is_float_singleton, is_float_like, |
| alignment_of, s390_return_value): Make checks for |
| TYPE_CODE_FLT to match TYPE_CODE_DECFLOAT as well. |
| |
| 2008-01-31 Luis Machado <luisgpm@br.ibm.com> |
| Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * infcmd.c (default_print_registers_info): Also print hex |
| raw contents for TYPE_CODE_DECFLOAT registers. |
| * ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member. |
| * rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro. |
| (rs6000_register_name): Add support for DFP pseudo-registers. |
| (rs6000_pseudo_register_type): Likewise. |
| rs6000_pseudo_register_reggroup_p): Likewise. |
| (ppc_pseudo_register_read): New function. |
| (ppc_pseudo_register_write): Likewise. |
| (rs6000_pseudo_register_read): Likewise. |
| (rs6000_pseudo_register_write): Likewise. |
| (e500_pseudo_register_read): Move checks to |
| rs6000_pseudo_register_read. |
| (e500_pseudo_register_write): Move checks to |
| rs6000_pseudo_register_write. |
| (rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum. Install |
| rs6000_pseudo_register_read and rs6000_pseudo_register_write |
| in gdbarch if SPE or DFP is available. Adjust gdbarch's |
| num_pseudo_regs to account for DFP pseudo regs. |
| |
| 2008-01-31 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_ev31_regnum member. |
| * rs6000-tdep.c (IS_SPE_PSEUDOREG): New macro. |
| (spe_register_p, rs6000_register_name, rs6000_pseudo_register_type, |
| rs6000_pseudo_register_reggroup_p, e500_move_ev_register, |
| e500_pseudo_register_read, e500_pseudo_register_write): Use |
| IS_SPE_PSEUDOREG macro. |
| (rs6000_frame_cache): Remove use of tdep->ppc_ev31_regnum. |
| (rs6000_gdbarch_init): Remove unnecessary num_sprs local variable. |
| Remove initialization of tdep->ppc_ev31_regnum. |
| |
| 2008-01-08 Paul Hilfinger <hilfinger@adacore.com> |
| |
| * printcmd.c (print_formatted): Handle references as for unformatted |
| prints. |
| |
| 2008-01-30 Joel Brobecker <brobecker@adacore.com> |
| |
| * eval.c (evaluate_subexp_standard): Add handling of user |
| registers when in EVAL_AVOID_SIDE_EFFECTS mode. |
| |
| 2008-01-30 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * eval.c (evaluate_subexp_standard): Support |
| BINOP_INTDIV opcode. |
| |
| 2008-01-30 Paul N. Hilfinger <hilfinger@adacore.com> |
| |
| * valarith.c (value_binop): Add floating-point BINOP_MIN and |
| BINOP_MAX cases. |
| For BINOP_EXP, use length and signedness of left operand only for |
| result, as for shifts. |
| For integral operands to BINOP_EXP, use new integer_pow and |
| uinteger_pow functions so as to get full range of results. |
| (integer_pow): New function. |
| (uinteger_pow): New function. |
| |
| 2008-01-30 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Use vector for varobj_list_children interface. |
| * gdb/varobj.c (varobj_list_children): Return vector |
| of varobjs. |
| * gdb/varobj.h (varobj_list_children): Adjust |
| prototype. |
| (varobj_p): Declare. Declare vector thereof. |
| * mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust |
| for varobj_list_children change. |
| * Makefile.in (varobj_h): Update dependencies. |
| |
| 2008-01-30 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Add support for |
| TYPE_CODE_DECFLOAT arguments. |
| (ppc64_sysv_abi_push_dummy_call) Likewise. |
| (get_decimal_float_return_value): New function. |
| (do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return |
| values by calling get_decimal_float_return_value. |
| (ppc64_sysv_abi_return_value): Likewise. |
| |
| 2008-01-30 Nick Roberts <nickrob@snap.net.nz> |
| |
| * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Add field |
| for preprocessor macro information. Formatting changes. |
| |
| 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote.c (struct remote_state): Add cached_wait_status. |
| (remote_exec_file): New variable. |
| (PACKET_vAttach, PACKET_vRun): New constants. |
| (extended_remote_restart): Do not query for status. |
| (struct start_remote_args): New. |
| (remote_start_remote): Take it as a second argument. Check |
| whether the target is running. Issue an error for non-running |
| non-extended targets. Cache the wait status. Set inferior_ptid |
| here. |
| (remote_open_1): Prompt to disconnect non-running targets. Make |
| sure the target is marked running. Do not set inferior_ptid here. |
| Update call to remote_start_remote. Do not call remote_check_symbols |
| if the target is not running. |
| (remote_detach_1): Rename from remote_detach. Take an EXTENDED |
| argument. Handle a non-running target. |
| (remote_detach): Use it. |
| (extended_remote_detach): New. |
| (remote_disconnect): Fix typo. Use remoute_mourn_1. |
| (extended_remote_attach_1, extended_remote_attach) |
| (extended_async_remote_attach): New. |
| (remote_vcont_resume): Remove unused variable. |
| (remote_wait, remote_async_wait): Use any cached wait status. |
| (putpkt_binary, getpkt): Clear any cached wait status. |
| (extended_remoute_mourn_1): New. |
| (extended_remote_mourn): Use it. |
| (extended_async_remote_mourn, extended_remote_run): New. |
| (extended_remote_create_inferior_1): New. |
| (extended_remote_create_inferior): Use it. |
| (extended_remote_async_create_inferior): Likewise. |
| (remote_xfer_partial): Skip for non-executing targets. |
| (init_extended_remote_ops): Set to_detach and to_attach. |
| (init_extended_async_remote_ops): Likewise. Use |
| extended_async_remote_mourn. |
| (_initialize_remote): Register vAttach, vRun, and |
| set remote exec-file. |
| * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. |
| |
| 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * Makefile.in (symfile.o): Update. |
| * NEWS: Mention exec tracing support. |
| * inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for |
| exec events. |
| * infcmd.c (kill_if_already_running, detach_command) |
| (disconnect_command): Replace SOLIB_RESTART with no_shared_libraries. |
| * infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete. |
| (follow_exec): Do not check may_follow_exec. Do not mourn and push |
| targets. Apply the sysroot path to the loaded executable. Use |
| no_shared_libraries. |
| * linux-nat.c (linux_child_follow_fork): Print fork following |
| messages if verbose. |
| (kill_wait_callback): Kill again before waiting a second time. |
| * symfile.c (symbol_file_clear): Replace SOLIB_RESTART with |
| no_shared_libraries. |
| |
| 2008-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| * amd64-tdep.c (amd64_classify): Add handling of TYPE_CODE_CHAR. |
| |
| 2008-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| * nto-tdep.h: Remove #include "defs.h". |
| * nto-tdep.c: Add #include "defs.h". |
| * Makefile.in (nto_tdep_h): Update dependencies. |
| (nto-tdep.o): Likewise. |
| |
| 2008-01-29 Joel Brobecker <brobecker@adacore.com> |
| |
| * infrun.c (wait_for_inferior): Add treat_exec_as_sigtrap parameter |
| and use it. |
| (proceed, start_remote): Update call to wait_for_inferior. |
| * inferior.h (wait_for_inferior): Update declaration. |
| * fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c, |
| solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior. |
| * inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as |
| TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED. |
| |
| 2008-01-29 Aleksandar Ristovski <aristovski@qnx.com> |
| |
| * varobj (adjust_value_for_child_access): Added checking for |
| returned value from gdb_value_ind. |
| (c_describe_child): Likewise. |
| (cplus_describe_child): Fixed a typo. |
| |
| 2008-01-29 Jim Blandy <jimb@red-bean.com> |
| |
| * MAINTAINERS: Update my info. |
| |
| 2008-01-29 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Use multiple locations for hardware watchpoints. |
| This eliminates the need to traverse value chain, doing |
| various checks, in three different places. |
| |
| * breakpoint.h (struct bp_location): New fields |
| lengths and watchpoint_type. |
| (struct breakpoint): Remove the val_chain field. |
| * breakpoint.c (is_hardware_watchpoint): New. |
| (free_valchain): Remove. |
| (update_watchpoint): New. |
| (insert_bp_location): For hardware watchpoint, just |
| directly insert it. |
| (insert_breakpoints): Call update_watchpoint_locations |
| on all watchpoints. If we have failed to insert |
| any location of a hardware watchpoint, remove all inserted |
| locations. |
| (remove_breakpoint): For hardware watchpoints, directly |
| remove location. |
| (watchpoints_triggered): Iterate over locations. |
| (bpstat_stop_status): Use only first location of |
| a resource watchpoint. |
| (delete_breakpoint): Don't call free_valchain. |
| (print_one_breakpoint): Don't print all |
| locations for watchpoints. |
| (breakpoint_re_set_one): Use update_watchpoint for |
| watchpoints. |
| |
| 2008-01-29 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Don't reset watchpoint block on solib load. |
| |
| * breakpoint.c (insert_bp_location): For watchpoints, |
| recompute condition. |
| (breakpoint_re_set_one): Instead of recomputing value |
| and condition for watchpoints, just reset value and |
| let insert_breakpoints/insert_bp_location recompute it. |
| Don't do anything about disabled watchpoint. |
| |
| 2008-01-29 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * valarith.c (value_binop): Handle unsigned integer |
| division by zero. |
| |
| 2008-01-28 Kevin Buettner <kevinb@redhat.com> |
| |
| * mn10300-tdep.c (mn10300_analyze_prologue): Check for an |
| instruction pattern that appears frequently in position |
| independent code. Fix bug in code which looks for "fmov" and |
| backtracks if no "fmov" is found. |
| |
| 2008-01-28 Doug Evans <dje@google.com> |
| |
| * dbxread.c (read_dbx_symtab): Fix indentation. |
| Reformat comments to 80 columns. |
| Move local var def closer to only use. |
| |
| 2008-01-28 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * fork-child.c (SHELL_FILE): Remove #ifndef. |
| (fork_inferior): Remove SHELL_COMMAND_CONCAT. |
| |
| 2008-01-25 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * i386-tdep.c (i386_skip_noop): New function. |
| (i386_analyze_prologue): Call i386_skip_noop function. |
| |
| 2008-01-24 Michael Snyder <msnyder@specifix.com> |
| |
| * procfs.c (procfs_xfer_partial): Comment, cut/paste error. |
| * win32-nat.c (win32_xfer_partial): Ditto. |
| * target.c (default_xfer_partial): Minor whitespace adjustment. |
| |
| 2008-01-24 Pedro Alves <pedro@codesourcery.com> |
| |
| * arm-tdep.c (arm_addr_bits_remove): In non 26-bit mode, don't |
| strip bit 1 even if pc doesn't point to thumb code. |
| |
| 2008-01-23 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * remote.c (remote_wait): Handle SIGINT between packets. |
| (remote_async_wait): Likewise. |
| |
| 2008-01-23 Vladimir Prus <vladimir@codesourcery.com> |
| Chris Demetriou <cgd@google.com> |
| |
| * thread.c (add_thread_silent): Renamed |
| from add_thread. |
| (print_thread_events): New variable definition. |
| (show_print_thread_events): New function. |
| (_initialize_thread): Add "set print thread-events" and |
| "show print thread-events" commands. |
| (add_thread): Announce new thread. |
| * gdbthread.h (add_thread_silent): Declare. |
| (print_thread_events): New variable declaration. |
| * inf-ttrace.c (inf_ttrace_wait): Don't |
| inform about new thread, as add_thread is always |
| called too, and will take care of that. |
| * infrun.c (handle_inferior_event): Likewise. |
| * procfs.c (procfs_wait): Likewise. |
| * remote.c (remote_currthread): Likewise. |
| * sol-thread.c (sol_thread_wait): Likewise. |
| * win32-nat.c (get_win32_debug_event): Likewise. |
| * linux-thread-db.c (attach_thread): Likewise. |
| Remove the verbose parameter. |
| (check_event): Make detach_thread be verbose |
| only if print_thread_events is set. |
| * linux-nat.c (lin_lwp_attach_lwp): Don't inform |
| about new thread. This is called only from |
| linux-thread-db.c:attach_thread, which will take care. |
| Remove the verbose parameter. |
| * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype. |
| |
| 2008-01-23 Nick Roberts <nickrob@snap.net.nz> |
| |
| * mi/mi-cmd-var.c (mi_cmd_var_set_format): Add value field to output. |
| |
| 2008-01-22 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * breakpoint.c (break_command_really): New parameter |
| ignore_count. |
| (break_command_1): Pass 0 as |
| ignore_count to break_command_really. |
| (gdb_breakpoint): Pass ignore_count to |
| break_command_really. |
| |
| 2008-01-21 Kevin Buettner <kevinb@redhat.com> |
| |
| * mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find |
| sigcontext struct via pointer. |
| (struct sigframe comment): Update to show new field `psc'. |
| |
| 2008-01-21 Vladimir Prus <vladimir@codesourcery.com> |
| |
| * infrun.c (handle_inferior_event): If |
| we failed to remove breakpoints, error, |
| don't try to increment PC by hand. |
| |
| 2008-01-18 Nick Hudson <nick.hudson@dsl.pipex.com> |
| |
| Add NetBSD/hppa target and host support. |
| |
| * hppabsd-tdep.c (hppabsd_supply_gregset): Move to ... |
| (hppabsd_gregset): Move to ... |
| (hppabsd_regset_from_core_section): Rename |
| hppaobsd_regset_from_core_section and move to ... |
| (hppabsd_find_global_pointer): Update comment. |
| (hppabsd_init_abi): Make global. Do not register |
| hppabsd_regset_from_core_section. |
| (hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and |
| move to ... |
| (_initialize_hppabsd_tdep): Move to ... |
| * hppaobsd-tdep.c: ... here. New file. |
| * hppnbsd-tdep.c: New file. |
| * hppnbsd-nat.c: New file. |
| * Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o. |
| (ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c. |
| (hppabsd-nat.o, hppabsd-tdep.o): New dependencies. |
| (hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies. |
| * configure.host (hppa*-*-netbsd*): New entry. |
| * configure.tgt (hppa*-*-netbsd*): New entry. |
| (hppa*-*-openbsd*): Update. |
| * NEWS (New native configuration): Mention NetBSD/hppa. |
| (New targets): Mention NetBSD/hppa. |
| |
| 2008-01-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * gdbarch.sh (function_list): Add new property bits_big_endian to |
| gdbarch structure. |
| * gdbarch.{c,h}: Regenerate. |
| |
| * value.c (struct value): Replace BITS_BIG_ENDIAN by |
| gdbarch_bits_big_endian (comment). |
| (unpack_field_as_long, modify_field): Likewise. |
| * value.h: Likewise (comment). |
| * valops.c (value_slice): Likewise. |
| * valarith.c (value_subscript, value_bit_index): Likewise. |
| * gdbtypes.h (field): Likewise (comment). |
| * eval.c (evaluate_subexp_standard): Likewise. |
| * dwarf2read.c (dwarf2_add_field): Likewise. |
| * ada-lang.c (decode_packed_array, ada_value_primitive_packed_val) |
| (move_bits, ada_value_assign, value_assign_to_component): Likewise. |
| |
| * defs.h (BITS_BIG_ENDIAN): Remove. |
| |
| 2008-01-18 Markus Deuling <deuling@de.ibm.com> |
| |
| * jv-exp.y (yylex): Replace DEPRECATED_STREQN with the appropriate |
| function calls. |
| * m2-exp.y (yylex): Likewise. |
| * objc-exp.y (yylex): Likewise. |
| |
| * defs.h (DEPRECATED_STREQN): Remove. |
| |
| 2008-01-17 H.J. Lu <hjl.tools@gmail.com> |
| |
| * MAINTAINERS: Update my email address. |
| |
| 2008-01-17 Jim Blandy <jimb@codesourcery.com> |
| |
| * README: Mention gdbserver/README. |
| |
| 2008-01-17 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * valarith.c (value_binop): Handle BINOP_INTDIV |
| for unsigned and signed integers. |
| |
| 2008-01-17 Ulrich Weigand <uweigand@de.ibm.com> |
| |
| * s390-tdep.c (s390_gdbarch_init): Set default long double |
| type to 128-bit IEEE quad. |
| |
| 2008-01-17 Joel Brobecker <brobecker@adacore.com> |
| |
| * hpux-thread.c (hpux_thread_resume): Delete commented-out code. |
| |
| 2008-01-16 Mark Kettenis <kettenis@gnu.org> |
| |
| * auxv.c (fprint_target_auxv): Add support for AT_SUN_AUXFLAGS. |
| |
| * dfp.c, dfp.h: Rename decimal_to_double to decimal_to_doublest. |
| * value.c: All callers changed. |
| |
| 2008-01-16 Markus Deuling <deuling@de.ibm.com> |
| |
| * rs6000-nat.c (add_vmap, vmap_ldinfo, vmap_exec): Replace |
| DEPRECATED_STREQ by its expression. |
| * coffread.c (coff_locate_sections, coff_symtab_read): Likewise. |
| * xcoffread.c (read_xcoff_symtab, read_symbol_lineno, find_linenos) |
| (scan_xcoff_symtab): Likewise. |
| * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Likewise. |
| * f-lang.c (find_common_for_function): Likewise. |
| * objc-exp.y (parse_number): Likewise. |
| |
| * defs.h (DEPRECATED_STREQ): Remove. |
| |
| 2008-01-16 Markus Deuling <deuling@de.ibm.com> |
| |
| * mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter. |
| * mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use |
| get_frame_arch to get at the current_architecture. Update AM33_MODE |
| call. |
| (mn10300_analyze_prologue): Add gdbarch as parameter. Update caller. |
| (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current |
| architecture. |
| (set_reg_offsets, mn10300_analyze_prologue): Fix indentation. |
| |
| 2008-01-16 Markus Deuling <deuling@de.ibm.com> |
| |
| * amd64-nat.h (amd64_native_gregset_supplies_p): Add gdbarch as |
| parameter. |
| * amd64-nat.c (amd64_native_gregset_supplies_p): Likewise. |
| |
| (amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. Update caller. |
| |
| * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers) |
| (amd64_linux_store_inferior_registers): Use get_regcache_arch to get at |
| the current architecture. Update calls of |
| amd64_native_gregset_supplies_p. |
| * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers) |
| (amd64bsd_store_inferior_registers): Likewise. |
| |
| 2008-01-16 Markus Deuling <deuling@de.ibm.com> |
| |
| * ppc-linux-nat.c (ppc_register_u_addr): Add gdbarch as parameter. |
| Replace current_gdbarch by gdbarch. Update caller. |
| |
| 2008-01-16 Markus Deuling <deuling@de.ibm.com> |
| |
| * dbxread.c (repeated_header_complaint, dbx_symfile_init) |
| (read_dbx_dynamic_symtab, function_outside_compilation_unit_complaint) |
| (read_dbx_symtab, end_psymtab, dbx_psymtab_to_symtab_1) |
| (dbx_psymtab_to_symtab, read_ofile_symtab, process_one_symbol) |
| (stabsect_build_psymtabs): Fix indentation. |
| |
| 2008-01-15 Michael Snyder <msnyder@specifix.com> |
| |
| * corelow.c (core_xfer_partial): Comment, cut/paste error. |
| |
| 2008-01-14 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * win32-nat.c (win32_create_inferior): Restore code calling |
| CloseHandle on ProcessInformation structure. |
| |
| 2008-01-13 Nick Hudson <nick.hudson@dsl.pipex.com> |
| |
| * configure.ac: Check for void * as 3 argument of ptrace. |
| * configure: regenerate. |
| |
| 2008-01-11 Markus Deuling <deuling@de.ibm.com> |
| |
| * alpha-tdep.c (alpha_heuristic_proc_start) |
| (alpha_sigtramp_register_address): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. |
| |
| (alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the |
| current architecture by frame_info. Update alpha_heuristic_proc_start |
| call. |
| |
| (alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use |
| get_frame_arch to get at the current architecture by frame_info. Update |
| alpha_sigtramp_register_address call. |
| |
| * arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace |
| current_gdbarch by gdbarch. Update caller. |
| (convert_to_extended, convert_from_extended): Add endianess parameter |
| for comparison. Update caller. |
| (arm_extract_return_value, arm_store_return_value): Use |
| get_regcache_arch to get at the current architecture. |
| |
| * cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. Update caller. |
| (cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add |
| gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch. |
| |
| * h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add |
| gdbarch as parameter. Update caller. |
| (h8300_init_frame_cache): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. Update caller. |
| |
| * hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and |
| update caller. Replace current_gdbarch by gdbarch. |
| |
| * m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at |
| the current architecture. Replace current_gdbarch by gdbarch. |
| * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise. |
| (STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its |
| expression. Add gdbarch as parameter and replace current_gdbarch with |
| it. Update caller. |
| (M6811_TDEP): Remove. |
| (m68hc11_frame_prev_register): Use get_frame_arch to get at the current |
| architecture. |
| (m68hc11_scan_prologue): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. Update caller. |
| |
| * m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and |
| update caller. |
| (m68k_analyze_register_saves): Likewise. Also replace current_gdbarch |
| by gdbarch. |
| |
| * rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update |
| caller. Relace current_gdbarch by gdbarch. |
| (altivec_register_p, spe_register_p): Likewise. |
| * ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as |
| parameter. |
| * ppc-linux-nat.c (fetch_register, store_register): Update caller of |
| altivec_register_p and spe_register_p. |
| |
| * score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update |
| caller. Replace current_gdbarch by gdbarch. |
| (score_analyze_prologue): use get_frame_arch to get at the current |
| architecture. |
| |
| * sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter. |
| * sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace |
| current_gdbarch by gdbarch. Update caller. |
| (sparc_frame_cache): Use get_frame_arch to get at the current |
| architecture. |
| * sparce64-tdep.c (sparc64_skip_prologue): Update call of |
| sparc_analyze_prologue. |
| |
| * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as |
| parameter. |
| |
| 2008-01-11 Markus Deuling <deuling@de.ibm.com> |
| |
| * exec.c: #include "arch-utils.h" |
| (print_section_info): Use gdbarch_from_bfd to get at the |
| current architecture. Replace current_gdbarch. Fix indention. Replace |
| deprecated_print_address_numeric by paddress. |
| * Makefile.in (exec.o) Add dependency to arch-utils.h. |
| |
| * valprint.c (val_print_string): Replace |
| deprecated_print_address_numeric. |
| * tracepoint.c (trace_mention, scope_info): Likewise. |
| * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol) |
| (print_symbol, print_partial_symbols, maintenance_info_psymtabs) |
| (maintenance_check_symtabs): Likewise. |
| * symfile.c (list_overlays_command): Likewise. |
| * stack.c (frame_info, print_block_frame_labels): Likewise. |
| * printcmd.c (print_address, print_address_demangle) |
| (address_info): Likewise. |
| * corefile.c (memory_error): Likewise. |
| * infcmd.c (jump_command): Likewise. |
| * breakpoint.c (insert_bp_location, describe_other_breakpoints) |
| (mention, delete_breakpoint): Likewise. |
| * c-valprint.c (print_function_pointer_address, c_val_print): Likewise. |
| * dwarf2read.c (dump_die): Likewise. |
| * ada-valprint.c (ada_val_print_1): Likewise. |
| * f-valprint.c (f_val_print): Likewise. |
| * linux-fork.c (info_forks_command): Likewise. |
| * m32r-com.c (m32r_load_section, m32r_load) |
| (m32r_upload_command): Likewise. |
| |
| * ui-out.c (ui_out_field_core_addr): Remove unnecessary comment. |
| |
| 2008-01-11 Markus Deuling <deuling@de.ibm.com> |
| |
| * gdbarch.sh (skip_prologue): Add gdbarch |
| as parameter. |
| * gdbarch.{c,h}: Regenerate. |
| |
| * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter. |
| * amd64-tdep.c (amd64_skip_prologue): Likewise. |
| * avr-tdep.c (avr_skip_prologue): Likewise. |
| * cris-tdep.c (cris_skip_prologue): Likewise. |
| * frv-tdep.c (frv_skip_prologue): Likewise. |
| * h8300-tdep.c (h8300_skip_prologue): Likewise. |
| * hppa-tdep.c (hppa_skip_prologue): Likewise. |
| * i386-tdep.c (i386_skip_prologue): Likewise. |
| * ia64-tdep.c (ia64_skip_prologue): Likewise. |
| * iq2000-tdep.c (iq2000_skip_prologue): Likewise. |
| * m32r-tdep.c (m32r_skip_prologue): Likewise. |
| * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise. |
| * m68k-tdep.c (m68k_skip_prologue): Likewise. |
| * m88k-tdep.c (m88k_skip_prologue): Likewise. |
| * mep-tdep.c (mep_skip_prologue): Likewise. |
| * mips-tdep.c (mips_skip_prologue): Likewise. |
| * mn10300-tdep.c (mn10300_skip_prologue): Likewise. |
| * mt-tdep.c (mt_skip_prologue): Likewise. |
| * rs6000-tdep.c (rs6000_skip_prologue): Likewise. |
| * score-tdep.c (score_skip_prologue): Likewise. |
| * sh64-tdep.c (sh64_skip_prologue): Likewise. |
| * sh-tdep.c (sh_skip_prologue): Likewise. |
| * sparc64-tdep.c (sparc64_skip_prologue): Likewise. |
| * sparc-tdep.c (sparc32_skip_prologue): Likewise. |
| * spu-tdep.c (spu_skip_prologue): Likewise. |
| * v850-tdep.c (v850_skip_prologue): Likewise. |
| * vax-tdep.c (vax_skip_prologue): Likewise. |
| * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise. |
| * xtensa-tdep.c (xtensa_skip_prologue): Likewise. |
| |
| * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace |
| current_gdbarch by gdbarch. |
| * m32c-tdep.c (m32c_skip_prologue): Likewise. |
| * s390-tdep.c (s390_skip_prologue): Likewise. |
| |
| 2008-01-10 Doug Evans <dje@google.com> |
| |
| * defs.h (struct continuation_arg): Fix typo in comment. |
| * target.c (target_translate_tls_address): Fix comment spelling error. |
| |
| 2008-01-09 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * doublest.h (DOUBLEST_PRINT_FORMAT): Remove % from string. |
| (DOUBLEST_SCAN_FORMAT): Likewise. |
| * dfp.c (decimal_from_floating): Use DOUBLEST_PRINT_FORMAT. |
| * ada-lex.l (processReal): Prepend "%" to use of DOUBLEST_SCAN_FORMAT. |
| * c-exp.y (parse_number): Likewise. |
| * jv-exp.y (parse_number): Likewise. |
| * objc-exp.y (parse_number): Likewise. |
| * p-exp.y (parse_number): Likewise. |
| |
| 2008-01-09 Joel Brobecker <brobecker@adacore.com> |
| |
| * gdbtypes.c (create_array_type): Add handling of null Ada arrays. |
| (check_typedef): Likewise. |
| |
| 2008-01-09 Luis Machado <luisgpm@br.ibm.com> |
| |
| * printcmd.c (printf_command): Add seen_big_h, seen_big_d and |
| seen_double_big_d, treat the new H, D, and DD modifiers as length |
| modifiers. |
| |
| 2008-01-08 Joel Brobecker <brobecker@adacore.com> |
| |
| * dwarf2read.c (read_enumeration_type): Add comment. |
| |
| 2008-01-08 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * config.in: Regenerate. |
| |
| 2008-01-08 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_convert_actual): Renames convert_actual. |
| Make non-static. |
| (ada_convert_actuals): Delete. |
| * ada-lang.h (ada_convert_actual): Add declaration. |
| (ada_convert_actuals): Remove declaration. |
| * infcall.c: #include "ada-lang.h". |
| (value_arg_coerce): Add new parameter sp. Update function |
| documetnation. Add handling of Ada function call parameters. |
| * Makefile.in (infcall.o): Update dependencies. |
| |
| 2008-01-08 Paul Hilfinger <hilfinger@adacore.com> |
| |
| * ada-lang.c (ensure_lval): Fix value lval kind. |
| (convert_actual): Add handling for arguments passed by reference. |
| |
| 2008-01-08 Doug Evans <dje@google.com> |
| |
| * dbxread.c (read_dbx_symtab): Fix indentation. |
| |
| 2008-01-07 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * Makefile.in (dfp.o): Depend on expression.h, gdbtypes.h and value.h. |
| (valarith.o): Depend on dfp.h. |
| (valops.o): Likewise. |
| * dfp.c: Include expression.h, gdbtypes.h, value.h and dfp.h. |
| (set_decnumber_context): New function. |
| (decimal_check_errors): Likewise. |
| (decimal_from_number): Likewise. |
| (decimal_to_number): Likewise. |
| (decimal_from_string): Use set_decnumber_context and |
| decimal_check_errors. |
| (decimal_from_integral): New function. |
| (decimal_from_floating): Likewise. |
| (decimal_to_double): Likewise. |
| (promote_decimal): Likewise. |
| (decimal_binop): Likewise. |
| (decimal_is_zero): Likewise. |
| (decimal_compare): Likewise. |
| (decimal_convert): Likewise. |
| * dfp.h (decimal_from_integral): New prototype. |
| (decimal_from_floating): Likewise. |
| (decimal_to_double): Likewise. |
| (decimal_binop): Likewise. |
| (decimal_is_zero): Likewise. |
| (decimal_compare): Likewise. |
| (decimal_convert): Likewise. |
| * eval.c (evaluate_subexp_standard): Remove expect_type argument from |
| call to value_from_decfloat. |
| * valarith.c: Include dfp.h. |
| (value_args_as_decimal): New function. |
| (value_binop): Add if block to handle TYPE_CODE_DECFLOAT values. |
| (value_logical_not): Likewise. |
| (value_equal): Likewise. |
| (value_less): Likewise. |
| (value_pos): Likewise. |
| (value_neg): Formatting fix. |
| * valops.c: Include dfp.h. |
| (value_cast): Add if block to handle TYPE_CODE_DECFLOAT values. |
| * value.c (unpack_long): Add case to handle TYPE_CODE_DECFLOAT. |
| (unpack_double): Add if block to handle TYPE_CODE_DECFLOAT. |
| (value_from_decfloat): Remove expect_type argument. |
| * value.h (value_from_decfloat): Update prototype. |
| |
| 2008-01-07 Vladimir Prus <vladimir@codesourcery.com> |
| |
| Ignore change in name of dynamic linker during |
| execution on Solaris. This also unbreaks pending breakpoints. |
| |
| * solist.h (struct target_so_ops): New field same. |
| * solib-svr4.c (svr4_same): New. |
| (_initialize_svr4_solib): Register svr4_same. |
| * solib.c (update_solib_list): Use ops->same, if available. |
| |
| 2008-01-06 Christopher Faylor <me+cygwin@cgf.cx> |
| |
| * win32-nat.c (win32_make_so): Use cygwin-style path to avoid warnings |
| when using MS-DOS paths. |
| |
| 2008-01-05 Pedro Alves <pedro@codesourcery.com> |
| |
| * NEWS: Mention --pid and --core command line behaviour changes. |
| |
| 2008-01-05 Pedro Alves <pedro@codesourcery.com> |
| |
| * main.c (captured_main): Remove 'count' varible and the |
| ALIGN_STACK_ON_ENTRY block that used it. Error out if --core and |
| --pid options were issued simultaneously. If an explicit pid |
| option was passed, don't fallback to core file. Detect extra |
| arguments better in the presence of explicit pid or core |
| arguments. |
| |
| 2008-01-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_which_variant_applies): Correctly compute |
| the value of the discriminant when the variant record is packed. |
| |
| 2008-01-04 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (is_name_suffix): Handle middle-name numeric suffixes |
| that are used to differentiate homonyms. |
| |
| 2008-01-04 Jerome Guitton <guitton@adacore.com> |
| |
| * ada-lang.c (decode_packed_array_type): Avoid a seg fault |
| when the type is an anonymous pointer type. |
| (ada_check_typedef): Avoid a seg fault when the type is null. |
| * ada-typeprint.c (print_array_type): Add support for pointer |
| to packed arrays. |
| |
| 2008-01-04 Paul N. Hilfinger <hilfinger@adacore.com> |
| |
| * ada-exp.y: Allow '{type} ADDRESS' notation on left of assignment. |
| |
| 2008-01-04 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_evaluate_subexp): Evaluate tagged types in |
| EVAL_NORMAL mode when noside is EVAL_AVOID_SIDE_EFFECTS. |
| |
| 2008-01-04 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-exp.y (chop_separator): New function. |
| (write_selectors): Rewrite to re-use chop_separator. |
| (ada_nget_field_index, get_symbol_field_type): New functions. |
| (write_var_or_type): Add support for "ptype TYPENAME.FIELD" |
| expressions. |
| |
| 2008-01-03 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * symtab.c (find_pc_sect_line): Use SYMBOL_VALUE_ADDRESS instead |
| of SYMBOL_VALUE when working with function symbols. |
| |
| 2008-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (resolve_subexp): Add handling of OP_REGISTER |
| expressions. These expressions do not need to be rewriten. |
| |
| 2008-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * dwarf2read.c (read_enumeration_type): Flag type as stub if |
| the given die is a declaration. |
| |
| 2008-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_array_bound_from_type): Make non-static. |
| Handle properly the case when the index type is an enumerated type. |
| Do not return the subtype of the bounds type, just return the |
| bounds type directly - this is not needed and is more consistent |
| with what we do for arrays when no XA parallel type exists. |
| |
| 2008-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (static_unwrap_type): Add forward declaration. |
| (template_to_static_fixed_type): Fields of dynamic types sometimes |
| also need to be unwrapped. Take this into account. |
| (ada_to_fixed_type_1): Renamed from ada_to_fixed_type. |
| (ada_to_fixed_type): New wrapper around ada_to_fixed_type_1. |
| * ada-typeprint.c (ada_print_type): Get the typename from |
| the original type, not the base type. |
| |
| 2008-01-03 Jerome Guitton <guitton@adacore.com> |
| |
| * ada-lang.c (ada_value_struct_elt, to_fixed_array_type) |
| (to_fixed_array_type, ada_to_fixed_value_create, unwrap_value): |
| Update calls to ada_to_fixed_type. |
| (ada_template_to_fixed_record_type_1): Ditto, but without looking |
| for the tag. |
| (ada_to_fixed_type): Add check_tag parameter; do not look for |
| tag if null. When looking for a tag, use a fixed record type. |
| * ada-lang.h (ada_to_fixed_type): Add check_tag parameter. |
| * ada-valprint.c (printable_val_type, ada_value_print): Update |
| calls to ada_to_fixed_type. |
| |
| 2008-01-03 Luis Machado <luisgpm@br.ibm.com> |
| |
| * doublest.c (convert_floatformat_to_doublest): Call |
| floatformat_to_doublest instead of floatformat_to_double and use |
| DOUBLEST variables. |
| (convert_doublest_to_floatformat): Call floatformat_from_doublest |
| instead of floatformat_from_double and use DOUBLEST variables. |
| |
| 2008-01-03 Nick Hudson <nick.hudson@dsl.pipex.com> |
| |
| * MAINTAINERS (Write After Approval): Add self. |
| |
| 2008-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * symfile.c (set_initial_language): Make non-static. |
| * symfile.h (set_initial_language): Add declaration. |
| * language.c: #include "symfile.h". |
| (set_language): Call set_initial_language if the frame language |
| could not be determined. |
| |
| 2008-01-03 Paul N. Hilfinger <hilfinger@adacore.com> |
| |
| * eval.c (evaluate_subexp_for_address): Provide frame address to |
| locate_var_value only if it will be needed. |
| |
| 2008-01-02 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * linux-nat.c (linux_child_follow_fork): Call also CHECK_FOR_THREAD_DB. |
| |
| 2008-01-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_evaluate_subexp): Modify the value returned |
| when noside is EVAL_AVOID_SIDE_EFFECTS to be an lval_memory. |
| This is needed to make sure that any other treatment applied |
| to the resulting value does not fail for spurious reason, |
| such as trying to take the address of this value. |
| |
| 2008-01-02 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_value_equal): Dereference reference types when |
| comparing arrays. |
| |
| 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Updated copyright notices for most files. |
| |
| 2008-01-01 Christopher Faylor <me+gdb@cgf.cx> |
| |
| * win32-nat.c (psapi_module_handle): Remove static. |
| (get_module_name): Rename from psapi_get_dll_name. Revamp slightly to |
| return first module found if base_address is zero. Don't initialize |
| psapi function pointers here. Convert to cygwin paths when |
| appropriate. |
| (win32_pid_to_exec_file): Use Cygwin's /proc interface to determine |
| executable name. Use get_module_name when that fails or when |
| !__CYGWIN__. |
| (_initialize_psapi): New function. Initialize psapi stuff before it is |
| needed or issue a warning if it is not found. Move psapi_module_handle |
| here. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_remove_trailing_digits): New function. |
| (ada_remove_po_subprogram_suffix): New function. |
| (ada_decode): Improve. Move the description of the algorithm |
| directly inside the code, instead of in the function global |
| description. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint.c (ada_val_print_1) [TYPE_CODE_REF]: Ignore deref_ref |
| and always print the dereferenced value. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-lang.c (ada_evaluate_subexp, case BINOP_SUB): Add handling |
| of the case where the first argument is a reference. |
| (ada_evaluate_subexp, case BINOP_ADD): Likewise. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Implement support for Ada interface types. |
| |
| * ada-lang.c (ada_is_dispatch_table_ptr_type): New function. |
| (ada_is_ignored_field): Ignore fields that are a dispatch table |
| of a tagged type. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (print_gdb_version): Update copyright year. |
| |
| 2008-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * ChangeLog-2007: New ChangeLog rotation. |
| * ChangeLog: Reset for 2008. |
| * config/djgpp/fnchange.lst: Add entries for ChangeLog-2006 and |
| ChangeLog-2007. |
| |
| For older changes see ChangeLog-2007. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| coding: utf-8 |
| End: |