| 2007-04-06 Matt Thomas <matt@netbsd.org> |
| |
| * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp) |
| to emit pcrel relocations by DWARF2 in non-code sections. Borrowed |
| heavily from tc-sparc.c. (vax_cons_fix_new): Likewise. |
| |
| 2007-04-04 Kazu Hirata <kazu@codesourcery.com> |
| |
| * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a. |
| |
| 2007-04-04 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (do_neon_ext): Enforce immediate range. |
| (insns): Use I15 for vext. |
| |
| 2007-04-04 Paul Brook <paul@codesourcery.com> |
| |
| * configure.tgt: Loosen checks for arm uclinux eabi targets. |
| |
| 2007-04-02 Sterling Augustine <sterling@tensilica.com> |
| |
| * config/tc-xtensa.c (xtensa_flush_pending_output): Check |
| outputting_stabs_line_debug. |
| |
| 2007-03-26 Anatoly Sokolov <aesok@post.ru> |
| |
| * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82, |
| at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p |
| devices. |
| * doc/c-avr.texi: Document new devices. |
| |
| 2007-04-02 Richard Sandiford <richard@codesourcery.com> |
| |
| * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options. |
| * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document. |
| * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic. |
| |
| 2007-03-30 Sterling Augustine <sterling@tensilica.com> |
| Bob Wilson <bob.wilson@acm.org> |
| |
| * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument. |
| Do not check is_loop_target flag. |
| (xtensa_frob_label): Adjust calls to xtensa_move_labels. |
| (xg_assemble_vliw_tokens): Likewise. Also avoid calling |
| xtensa_move_labels for alignment of loop opcodes. |
| |
| 2007-03-30 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (process_suffix): Reindent a bit. |
| |
| 2007-03-30 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (encode_thumb2_ldmstm): New function. |
| (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm. |
| (do_t_push_pop): Use encode_thumb2_ldmstm. |
| |
| 2007-03-29 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-m32c.c (rl_for, relaxable): Protect argument. |
| (md_relax_table): Add entries for ADJNZ macros. |
| (M32C_Macros): Add ADJNZ macros. |
| (subtype_mappings): Add entries for ADJNZ macros. |
| (insn_to_subtype): Check for adjnz and sbjnz insns. |
| (md_estimate_size_before_relax): Pass insn to insn_to_subtype. |
| (md_convert_frag): Convert adjnz and sbjnz. |
| |
| 2007-03-29 Nick Clifton <nickc@redhat.com> |
| |
| * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long |
| initialization. |
| * itbl-ops.h (enum e_processor): Initialise the e_nprocs field |
| using ITBL_NUMBER_OF_PROCESSORS. |
| * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS. |
| |
| 2007-03-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (build_modrm_byte): For instructions with 2 |
| register operands, encode destination in i.rm.regmem if its |
| RegMem bit is set. |
| |
| 2007-03-28 Richard Sandiford <richard@codesourcery.com> |
| Phil Edwards <phil@codesourcery.com> |
| |
| * doc/as.texinfo: Put the contents after the title page rather |
| than at the end of the document. |
| |
| 2007-03-27 Alan Modra <amodra@bigpond.net.au> |
| |
| * NEWS: Mention ".reloc". |
| |
| 2007-03-26 Sterling Augustine <sterling@tensilica.com> |
| |
| * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms |
| in FLIX instructions. |
| |
| 2007-03-26 Julian Brown <julian@codesourcery.com> |
| |
| * config/tc-arm.c (arm_it): Add immisfloat field. |
| (parse_qfloat_immediate): Disallow integer syntax for floating-point |
| immediates. Fix hex immediates, handle 0.0 and -0.0 specially. |
| (parse_neon_mov): Set immisfloat bit for operand if it parsed as a |
| float. |
| (neon_cmode_for_move_imm): Reject non-float immediates for float |
| operands. |
| (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm. |
| |
| 2007-03-26 Julian Brown <julian@codesourcery.com> |
| |
| * doc/c-arm.texi: Add documentation for .dn/.qn directives. |
| |
| 2007-03-26 Alan Modra <amodra@bigpond.net.au> |
| |
| * doc/as.texinfo (Reloc): Document. |
| * read.c (potable): Add "reloc". |
| (s_reloc): New function. |
| * write.c (reloc_list): New global var. |
| (resolve_reloc_expr_symbols): New function. |
| (write_object_file): Call it. |
| (write_relocs): Process reloc_list. |
| * write.h (struct reloc_list): New. |
| (reloc_list): Declare. |
| |
| 2007-03-24 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes. |
| |
| 2007-03-24 Paul Brook <paul@codesourcery.com> |
| Mark Shinwell <shinwell@codesourcery.com> |
| |
| * config/tc-arm.c (operand_parse_code): Add OP_oRRw. |
| (parse_operands): Don't expect comma if first operand missing. |
| Handle OP_oRRw. |
| (do_srs): Encode register number, checking it is r13. Update comment. |
| (insns): Update SRS entries to take a register. |
| |
| 2007-03-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (md_begin): Allow '.' in mnemonic. |
| |
| 2007-03-23 Mark Shinwell <shinwell@codesourcery.com> |
| |
| * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that |
| attempt to jump to the next instruction into NOPs. |
| |
| 2007-03-23 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-spu.c: Don't include opcode/spu.h. |
| (md_assemble): Set tc_fix_data.insn_tag and arg_format. |
| (md_apply_fix): Adjust. |
| * config/tc-spu.h: Include opcode/spu.h. |
| (struct tc_fix_info): New. |
| (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust. |
| (TC_FORCE_RELOCATION): Define. |
| |
| 2007-03-22 Joseph Myers <joseph@codesourcery.com> |
| |
| * doc/as.texinfo: Include VERSION_PACKAGE when reporting version. |
| |
| 2007-03-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (process_suffix): Check 0x90 instead of |
| xchg for xchg %rax,%rax. |
| |
| 2007-03-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY |
| and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively. |
| |
| 2007-03-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR binutils/4218 |
| * config/tc-i386.c (match_template): Properly handle 64bit mode |
| "xchg %eax, %eax". |
| |
| 2007-03-21 Anton Ertl <anton@mips.complang.tuw> |
| |
| PR gas/4124 |
| * config/tc-alpha.c (emit_ustX): Fix ustq code generation. |
| |
| 2007-03-21 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am: Run dep-am. |
| * Makefile.in: Regenerated. |
| |
| * config/tc-i386.c: Don't include "opcodes/i386-opc.h". |
| |
| * config/tc-i386.h: Include "opcodes/i386-opc.h". |
| (NOP_OPCODE): Removed. |
| (template): Likewise. |
| |
| 2007-03-21 Andreas Schwab <schwab@suse.de> |
| |
| * config/tc-i386.h (NOP_OPCODE): Restore. |
| |
| 2007-03-18 Mark Shinwell <shinwell@codesourcery.com> |
| |
| * config/tc-arm.c (do_mul): Don't warn about overlapping |
| Rd and Rm operands when assembling for v6 or above. |
| Correctly capitalize register names in the messages. |
| (do_mlas): Likewise. Delete spurious blank line. |
| |
| 2007-03-16 Kazu Hirata <kazu@codesourcery.com> |
| |
| * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa. |
| |
| 2007-03-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (md_begin): Use i386_regtab_size to scan |
| i386_regtab. |
| (parse_register): Use i386_regtab_size instead of ARRAY_SIZE |
| on i386_regtab. |
| |
| 2007-03-15 Alexandre Oliva <aoliva@redhat.com> |
| |
| PR gas/4184 |
| * app.c (do_scrub_chars): PUT after setting states. |
| |
| 2007-03-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerated. |
| |
| * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of |
| "opcode/i386.h". |
| (md_begin): Check reg_name != NULL for the last entry in |
| i386_regtab. |
| |
| * config/tc-i386.h: Move many entries to opcode/i386.h and |
| opcodes/i386-opc.h. |
| |
| * configure.in (need_opcodes): Set true for i386. |
| * configure: Regenerated. |
| |
| 2007-03-15 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am (REPORT_BUGS_TO): Removed. |
| (INCLUDES): Remove -DREPORT_BUGS_TO. |
| * Makefile.in: Regenerated. |
| |
| * configure.in (--with-bugurl): Removed. |
| * configure: Regenerated. |
| |
| * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi. |
| (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc. |
| (TEXI2DVI): Likewise. |
| (gasver.texi): Removed. |
| (MOSTLYCLEANFILES): Remove gasver.texi. |
| (as.1): Don't depend on gasver.texi. |
| * doc/Makefile.in: Regenerated. |
| |
| * doc/as.texi: Include bfdver.texi instead of gasver.texi. |
| |
| 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * config/tc-arm.c (arm_copy_symbol_attributes): New. |
| * config/tc-arm.h (arm_copy_symbol_attributes): Declare. |
| (TC_COPY_SYMBOL_ATTRIBUTES): Define. |
| * gas/symbols.c (copy_symbol_attributes): Use |
| TC_COPY_SYMBOL_ATTRIBUTES. |
| |
| 2007-03-14 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding. |
| |
| 2007-03-14 Alan Modra <amodra@bigpond.net.au> |
| |
| PR 4029 |
| * write.c (relax_segment): Insert extra alignment padding |
| to break infinite relax loop when given impossible |
| gcc_except_table assembly. |
| |
| 2007-03-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX |
| on i.tm.base_opcode. |
| (match_template): Likewise. |
| (process_operands): Use ~0x3 mask to match MOV_AX_DISP32. |
| |
| * config/tc-i386.h (Opcode_D): New. |
| (Opcode_FloatR): Likewise. |
| (Opcode_FloatD): Likewise. |
| (D): Redefined. |
| (W): Likewise. |
| (FloatMF): Likewise. |
| (FloatR): Likewise. |
| (FloatD): Likewise. |
| |
| 2007-03-09 Alexandre Oliva <aoliva@redhat.com> |
| |
| * app.c (do_scrub_chars): Recognize comments after # line "file". |
| * read.c (get_linefile_number): New. |
| (s_app_line): Accept ill-formed .linefile lines as comments. |
| |
| 2007-03-09 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-i386.h (WORKING_DOT_WORD): Define. |
| |
| 2007-03-09 Alexandre Oliva <aoliva@redhat.com> |
| |
| * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile. |
| * as.h (new_logical_line_flags): New. |
| * input-scrub.c (new_logical_line): Turned into wrapper for... |
| (new_logical_line_flags): this. Handle flags. |
| * read.c (potable): Add linefile. Adjust appline argument. |
| (s_app_file): Fake .appfiles no more. |
| (s_app_line): For .linefile, accept file name and flags. |
| |
| 2007-03-08 Alan Modra <amodra@bigpond.net.au> |
| |
| * symbols.c (symbol_relc_make_sym): Comment typo fixes. |
| |
| 2007-03-08 Alan Modra <amodra@bigpond.net.au> |
| |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2007-03-07 Joseph Myers <joseph@codesourcery.com> |
| |
| * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of |
| bug-reporting URL. |
| * doc/Makefile.am (gasver.texi): Define BUGURL. |
| * doc/as.texinfo: Use BUGURL. |
| * Makefile.in, configure, doc/Makefile.in: Regenerate. |
| |
| 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com> |
| |
| * config/tc-s390.c (md_parse_option): z9-ec option added. |
| |
| 2007-03-02 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (relax_immediate): Always return positive values. |
| (relaxed_symbol_addr): New function. |
| (relax_adr, relax_branch): Use it. |
| (arm_relax_frag): Pass strect argument. Adjust infinite loop check. |
| |
| 2007-03-01 Joseph Myers <joseph@codesourcery.com> |
| |
| * as.c (parse_args): Update copyright date. |
| |
| 2007-02-28 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf. |
| |
| 2007-02-28 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/3797 |
| * config/tc-d10v.c (do_assemble): Do not generate error messages, |
| just return -1 whenever a problem is encountered. |
| (md_assemble): If do_assemble returns -1 generate a non-fatal |
| error message and return. |
| |
| PR gas/2623 |
| * config/tc-msp430.c (line_separator_char): Change to '{'. |
| |
| 2007-02-27 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-m68hc11.c (fixup24): Correct fixup size. |
| (build_jump_insn): Likewise. |
| (build_insn): Likewise. |
| (s_m68hc11_relax): Likewise. |
| |
| 2007-02-27 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/obj-elf.c (elf_frob_file): frag_wane any new frags. |
| |
| 2007-02-25 Mark Shinwell <shinwell@codesourcery.com> |
| |
| * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad. |
| |
| 2007-02-23 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-mn10300.c (md_convert_frag): Correct fixup size. |
| (md_assemble): Likewise. |
| |
| 2007-02-22 Alan Modra <amodra@bigpond.net.au> |
| |
| * write.c (size_seg): Always clear SEC_RELOC here. |
| (install_reloc): New function, extracted from.. |
| (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code |
| with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when |
| testing frag size. Set SEC_RELOC here. |
| |
| 2007-02-21 Alan Modra <amodra@bigpond.net.au> |
| |
| PR 4082 |
| * config/tc-avr.h (TC_FX_SIZE_SLACK): Define. |
| |
| 2007-02-20 Thiemo Seufer <ths@mips.com> |
| |
| * doc/c-mips.texi: Document 74kc, 74kf, 74kx. |
| |
| 2007-02-20 Thiemo Seufer <ths@mips.com> |
| |
| * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations. |
| |
| 2007-02-20 Thiemo Seufer <ths@mips.com> |
| Chao-Ying Fu <fu@mips.com> |
| |
| * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2, |
| ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support. |
| (macro_build): Add case '2'. |
| (macro): Expand M_BALIGN to nop, packrl.ph or balign. |
| (validate_mips_insn): Add support for balign instruction. |
| (mips_ip): Handle DSP R2 instructions. Support balign instruction. |
| (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE, |
| md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2 |
| command line options. |
| (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives. |
| (md_show_usage): Add -mdspr2 and -mno-dspr2 help output. |
| * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2, |
| .set dspr2, .set nodspr2. |
| |
| 2007-02-20 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New. |
| (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225. |
| |
| 2007-02-18 Alan Modra <amodra@bigpond.net.au> |
| |
| * write.c (TC_FX_SIZE_SLACK): Define. |
| (write_relocs): Reinstate check for fixup within frag. |
| * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define. |
| * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define. |
| * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define. |
| * config/tc-sh.h (TC_FX_SIZE_SLACK): Define. |
| * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define. |
| |
| 2007-02-17 Mark Mitchell <mark@codesourcery.com> |
| Nathan Sidwell <nathan@codesourcery.com> |
| Vladimir Prus <vladimir@codesourcery.com |
| Joseph Myers <joseph@codesourcery.com> |
| |
| * configure.in (--with-bugurl): New option. |
| * configure: Regenerate. |
| * dep-in.sed: Remove bin-bugs.h. |
| * Makefile.am (REPORT_BUGS_TO): Define. |
| (INCLUDES): Define REPORT_BUGS_TO. |
| (DEP_INCLUDES): Likewise. |
| ($(OBJS)): No longer depend on bin-bugs.h. |
| * Makefile.in: Regenerate. |
| * doc/Makefile.in: Regenerate. |
| * as.c (show_usage): Don't print empty REPORT_BUGS_TO. |
| * as.h: Remove include of bin-bugs.h. |
| |
| 2007-02-17 Alan Modra <amodra@bigpond.net.au> |
| |
| * write.c: White space fixes. |
| (fixup_segment): Move symbol_mri_common_p adjustments.. |
| (write_relocs): ..and symbol_equated_reloc_p adjustments.. |
| (adjust_reloc_syms): ..to here. |
| |
| 2007-02-16 Alan Modra <amodra@bigpond.net.au> |
| |
| * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than |
| xmalloc, memset. Don't bother assigning NULL to known zero mem. |
| (subseg_set_rest): Remove unnecessary cast. |
| * write.c: Include libbfd.h. Replace PTR with void * throughout. |
| Remove unnecessary forward declarations and casts. |
| (set_symtab): Delete extern bfd_alloc. |
| (fixup_segment): Move. |
| |
| 2007-02-15 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID. |
| * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names. |
| (mcf5475_ctrl, mcf5485_ctrl): New. |
| (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families. |
| (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling. |
| (init_table): Add asid, mmubar, adjust rombar0. |
| |
| 2007-02-14 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete. |
| * config/tc-i386.c: Wrap overly long lines, whitespace fixes. |
| (process_operands): Move old Seg2ShortForm and Seg3ShortForm |
| code, and test for these insns using a combination of |
| opcode_modifier and operand_types. |
| |
| 2007-02-07 Paul Brook <paul@codesourcery.com> |
| |
| * configure.tgt: Add arm*-*-uclinux-*eabi. |
| |
| 2007-02-05 Dave Brolley <brolley@redhat.com> |
| Richard Sandiford <rsandifo@redhat.com> |
| DJ Delorie <dj@redhat.com> |
| Stan Cox <scox@redhat.com> |
| Jim Blandy <jimb@redhat.com> |
| Nick Clifton <nickc@redhat.com> |
| Jim Wilson <wilson@redhat.com> |
| Frank Ch. Eigler <fche@redhat.com> |
| Graydon Hoare <graydon@redhat.com> |
| Ben Elliston <bje@redhat.com> |
| John Healy <jhealy@redhat.com> |
| Richard Henderson <rth@redhat.com> |
| |
| * Makefile.am (CPU_TYPES): Add mep. |
| (TARGET_CPU_CFILES): Add tc-mep.c. |
| (TARGET_CPU_HFILES): Add tc-mep.h. |
| (DEPTC_mep_elf): New variable. |
| (DEPTC_mep_coff): Likewise. |
| (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise. |
| * configure.in: Support mep. |
| * configure.tgt: Likewise. |
| * config/tc-mep.c: New file. |
| * config/obj-elf.c: New file. |
| * config/tc-mep.c: New file. |
| * config/tc-mep.h: New file. |
| * testsuite/gas/mep: New testsuite with content. |
| * Makefile.in: Regenerate. |
| * configure: Regenerate. |
| |
| 2007-02-05 Dave Brolley <brolley@redhat.com> |
| |
| * cgen.c (gas_cgen_install_complex_reloc): Removed. |
| (complex_reloc_installation_howto): Removed. |
| |
| 2007-02-05 Dave Brolley <brolley@redhat.com> |
| Graydon Hoare <graydon@redhat.com> |
| DJ Delorie <dj@redhat.com> |
| Catherine Moore <clm@redhat.com> |
| Michael Chastain <chastain@redhat.com> |
| Frank Ch. Eigler <fche@redhat.com> |
| |
| * symbols.c (use_complex_relocs_for): New, to decide |
| when to use complex relocs. Add signed RELC support. |
| (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally |
| encode expression symbols as mangled complex relocation symbols (when |
| compiled with -DOBJ_COMPLEX_RELOC). |
| (symbol_relc_make_sym,value,expr): New traversal/conversion routines. |
| * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call |
| encode_addend with new args. Modify to get start, length from |
| ifield whenever it is set. Also change condition on which |
| self-describing relocs are encoded. Add hook into |
| gas_cgen_encode_addend. |
| (queue_fixup_recursively): Add signed RELC support. Change from masked |
| expr to trunc flag. Restore assignment of sub-field value to |
| temporary in fixups array. Reflect changed meaning of last arg to |
| queue_fixup_recursively. |
| (fixup): Add cgen_maybe_multi_ifield member. |
| (make_right_shifted_expr): New function. |
| (queue_fixup): Change to recursive function that fragments |
| fixups if operand has a multi-ifield. |
| (gas_cgen_parse_operand): Add RELC code to wrap expressions in |
| symbols, call weak_operand_overflow_check, and fragment call |
| queue_fixup with operand fields. |
| (gas_cgen_finish_insn) Modify to manage ifield pointer. |
| (weak_operand_overflow_check): New function to try to select |
| insns correctly. |
| (gas_cgen_encode_addend): New function for relc. |
| (gas_cgen_install_complex_reloc): Likewise. |
| (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc. |
| * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add |
| cgen_maybe_multi_ifield field to fx_cgen substructure. |
| * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32. |
| * symbols.h (symbol_relc_make_sym,value,expr): New prototypes. |
| |
| 2007-02-03 DJ Delorie <dj@delorie.com> |
| |
| * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3 |
| byte relocs. |
| * config/tc-m32c.h (TC_CONS_FIX_NEW): Define. |
| (m32c_cons_fix_new): Prototype. |
| |
| 2007-02-02 Bob Wilson <bob.wilson@acm.org> |
| |
| * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init. |
| (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise. |
| |
| 2007-02-02 Bob Wilson <bob.wilson@acm.org> |
| |
| * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New. |
| (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table. |
| (map_suffix_reloc_to_operator): New. |
| (map_operator_to_reloc): New. |
| (expression_maybe_register): Fix incorrect test of return value from |
| xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator. |
| (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc. |
| |
| 2007-02-02 Bob Wilson <bob.wilson@acm.org> |
| |
| * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field. |
| (tinsn_get_tok): Delete prototype. |
| * config/tc-xtensa.c (tinsn_get_tok): Delete. |
| |
| 2007-02-02 Bob Wilson <bob.wilson@acm.org> |
| |
| * config/xtensa-relax.h (struct build_instr): Delete id field. |
| * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL |
| and LABEL tokens. |
| (append_literal_op, append_label_op): Remove litnum/labnum arguments; |
| set op_data fields to zero. |
| (parse_id_constant): Delete. |
| (build_transition): Remove code to handle numbered literals and labels. |
| |
| 2007-02-02 Bob Wilson <bob.wilson@acm.org> |
| |
| * config/xtensa-relax.c (build_transition): Remove code after as_fatal. |
| (build_transition_table): Likewise. |
| |
| 2007-02-01 Bob Wilson <bob.wilson@acm.org> |
| |
| * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of |
| fx_tcbit. |
| * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove. |
| |
| 2007-02-02 Alan Modra <amodra@bigpond.net.au> |
| |
| * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move. |
| (struct fix <fx_plt>): Rename to tcbit2. |
| * write.c (fix_new_internal): Adjust. |
| (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt. |
| * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise. |
| * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise. |
| * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise. |
| * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise. |
| * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise. |
| * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise. |
| * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise. |
| * config/tc-msp430.c (msp430_force_relocation_local): Likewise. |
| * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt. |
| * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt. |
| Instead, compare fx_r_type. |
| * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use |
| fx_tcbit in place of fx_plt. |
| * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define. |
| * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference |
| to fx_plt. |
| |
| 2007-01-30 Nick Clifton <nickc@redhat.com> |
| |
| * as.c (main): Mark symbols created via the --defsym command line |
| option as volatile so that they can be overridden later on by a |
| .set directive. This maintains compatibility with the behaviour |
| of earlier versions of the assembler. |
| * doc/as.texinfo (--defsym): Document that the defined symbol's |
| value can be overridden via a .set directive. |
| |
| 2007-01-28 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (swap_imm_operands): Renamed to ... |
| (swap_2_operands): This. Take 2 ints. |
| (md_assemble): Updated. |
| (swap_operands): Call swap_2_operands to swap 2 operands. |
| |
| 2007-01-24 DJ Delorie <dj@redhat.com> |
| |
| * config/tc-m32c.c (md_pseudo_table): Add .3byte. |
| |
| 2007-01-22 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/3871 |
| * tc-score.c: Remove unnecessary uses of _(). |
| Make the err_msg[] a file level local array in order to save |
| storage space. |
| Remove unnecessary sprintf()s. |
| |
| 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn> |
| |
| PR gas/3871 |
| * config/tc-score.c : Using _() for const string. |
| Do not assign inst.error with a local string pointer. |
| (md_section_align): Pad section. |
| |
| 2007-01-13 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (build_modrm_byte): Check number of operands |
| when procssing memory/register operand. |
| |
| 2007-01-12 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/3856 |
| * macro.c (expand_irp): Do not ignore spaces inside quoted |
| strings. |
| |
| 2007-01-12 Alan Modra <amodra@bigpond.net.au> |
| |
| * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete. |
| * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete. |
| * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete. |
| (TC_FORCE_RELOCATION): Define. |
| (TC_FORCE_RELOCATION_LOCAL): Define. |
| * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust. |
| |
| 2007-01-12 Alan Modra <amodra@bigpond.net.au> |
| |
| * input-file.c (input_file_open): Check fgets return. |
| |
| 2007-01-11 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (do_t_add_sub): Use Rd and Rs. |
| |
| 2007-01-11 Nick Clifton <nickc@redhat.com> |
| |
| PR gas/3707 |
| * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt |
| variable. |
| |
| * config/tc-mcore.c (md_number_to_chars): Use |
| number_to_chars_{big|little}endian. |
| |
| 2007-01-08 Kazu Hirata <kazu@codesourcery.com> |
| |
| * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an |
| architecture by itself. |
| (m68k_ip): Don't issue a warning for tbl instructions on fido. |
| (m68k_elf_final_processing): Treat Fido as an architecture by |
| itself. |
| |
| 2007-01-08 Kai Tietz <kai.tietz@onevision.com> |
| |
| * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw* |
| |
| 2007-01-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax |
| depending on allow_naked_reg. |
| |
| 2007-01-04 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form. |
| |
| 2007-01-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| PR gas/3830 |
| * config/tc-i386.c (register_prefix): New. |
| (set_intel_syntax): Set set_intel_syntax to "" if register |
| prefix isn't needed. |
| (check_byte_reg): Use register_prefix for error message. |
| (check_long_reg): Likewise. |
| (check_qword_reg): Likewise. |
| (check_word_reg): Likewise. |
| |
| 2006-01-04 Julian Brown <julian@codesourcery.com> |
| |
| * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM. |
| (do_neon_qshl_imm): Likewise. |
| (do_neon_rshl): New function. Handle rounding variants of |
| v{q}shl-by-register. |
| (insns): Use do_neon_rshl for vrshl, vqrshl. |
| |
| 2007-01-04 Paul Brook <paul@codesourcery.com> |
| |
| * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt |
| and vacle. |
| |
| 2007-01-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (swap_operands): Remove branches. |
| |
| 2007-01-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c: Update copyright year. |
| * config/tc-i386.h: Likewise. |
| |
| 2007-01-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c (smallest_imm_type): Return unsigned int |
| instead of int. |
| |
| 2007-01-03 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * config/tc-i386.c: Convert to ISO C90 formatting |
| * config/tc-i386.h: Likewise. |
| |
| 2007-01-03 David Daney <ddaney@avtrex.com> |
| |
| * config/tc-mips.c (md_show_usage): Clean up -mno-shared |
| documentation. |
| |
| For older changes see ChangeLog-2006 |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
