| /* Target-dependent code for the Renesas RX for GDB, the GNU debugger. |
| |
| Copyright (C) 2008-2024 Free Software Foundation, Inc. |
| |
| Contributed by Red Hat, Inc. |
| |
| This file is part of GDB. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| |
| #include "arch-utils.h" |
| #include "extract-store-integer.h" |
| #include "prologue-value.h" |
| #include "target.h" |
| #include "regcache.h" |
| #include "opcode/rx.h" |
| #include "dis-asm.h" |
| #include "gdbtypes.h" |
| #include "frame.h" |
| #include "frame-unwind.h" |
| #include "frame-base.h" |
| #include "value.h" |
| #include "gdbcore.h" |
| #include "dwarf2/frame.h" |
| #include "remote.h" |
| #include "target-descriptions.h" |
| #include "gdbarch.h" |
| #include "inferior.h" |
| |
| #include "elf/rx.h" |
| #include "elf-bfd.h" |
| #include <algorithm> |
| |
| #include "features/rx.c" |
| |
| /* Certain important register numbers. */ |
| enum |
| { |
| RX_SP_REGNUM = 0, |
| RX_R1_REGNUM = 1, |
| RX_R4_REGNUM = 4, |
| RX_FP_REGNUM = 6, |
| RX_R15_REGNUM = 15, |
| RX_USP_REGNUM = 16, |
| RX_PSW_REGNUM = 18, |
| RX_PC_REGNUM = 19, |
| RX_BPSW_REGNUM = 21, |
| RX_BPC_REGNUM = 22, |
| RX_FPSW_REGNUM = 24, |
| RX_ACC_REGNUM = 25, |
| RX_NUM_REGS = 26 |
| }; |
| |
| /* RX frame types. */ |
| enum rx_frame_type { |
| RX_FRAME_TYPE_NORMAL, |
| RX_FRAME_TYPE_EXCEPTION, |
| RX_FRAME_TYPE_FAST_INTERRUPT |
| }; |
| |
| /* Architecture specific data. */ |
| struct rx_gdbarch_tdep : gdbarch_tdep_base |
| { |
| /* The ELF header flags specify the multilib used. */ |
| int elf_flags = 0; |
| |
| /* Type of PSW and BPSW. */ |
| struct type *rx_psw_type = nullptr; |
| |
| /* Type of FPSW. */ |
| struct type *rx_fpsw_type = nullptr; |
| }; |
| |
| /* This structure holds the results of a prologue analysis. */ |
| struct rx_prologue |
| { |
| /* Frame type, either a normal frame or one of two types of exception |
| frames. */ |
| enum rx_frame_type frame_type; |
| |
| /* The offset from the frame base to the stack pointer --- always |
| zero or negative. |
| |
| Calling this a "size" is a bit misleading, but given that the |
| stack grows downwards, using offsets for everything keeps one |
| from going completely sign-crazy: you never change anything's |
| sign for an ADD instruction; always change the second operand's |
| sign for a SUB instruction; and everything takes care of |
| itself. */ |
| int frame_size; |
| |
| /* Non-zero if this function has initialized the frame pointer from |
| the stack pointer, zero otherwise. */ |
| int has_frame_ptr; |
| |
| /* If has_frame_ptr is non-zero, this is the offset from the frame |
| base to where the frame pointer points. This is always zero or |
| negative. */ |
| int frame_ptr_offset; |
| |
| /* The address of the first instruction at which the frame has been |
| set up and the arguments are where the debug info says they are |
| --- as best as we can tell. */ |
| CORE_ADDR prologue_end; |
| |
| /* reg_offset[R] is the offset from the CFA at which register R is |
| saved, or 1 if register R has not been saved. (Real values are |
| always zero or negative.) */ |
| int reg_offset[RX_NUM_REGS]; |
| }; |
| |
| /* RX register names */ |
| static const char *const rx_register_names[] = { |
| "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", |
| "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", |
| "usp", "isp", "psw", "pc", "intb", "bpsw","bpc","fintv", |
| "fpsw", "acc", |
| }; |
| |
| |
| /* Function for finding saved registers in a 'struct pv_area'; this |
| function is passed to pv_area::scan. |
| |
| If VALUE is a saved register, ADDR says it was saved at a constant |
| offset from the frame base, and SIZE indicates that the whole |
| register was saved, record its offset. */ |
| static void |
| check_for_saved (void *result_untyped, pv_t addr, CORE_ADDR size, pv_t value) |
| { |
| struct rx_prologue *result = (struct rx_prologue *) result_untyped; |
| |
| if (value.kind == pvk_register |
| && value.k == 0 |
| && pv_is_register (addr, RX_SP_REGNUM) |
| && size == register_size (current_inferior ()->arch (), value.reg)) |
| result->reg_offset[value.reg] = addr.k; |
| } |
| |
| /* Define a "handle" struct for fetching the next opcode. */ |
| struct rx_get_opcode_byte_handle |
| { |
| CORE_ADDR pc; |
| }; |
| |
| /* Fetch a byte on behalf of the opcode decoder. HANDLE contains |
| the memory address of the next byte to fetch. If successful, |
| the address in the handle is updated and the byte fetched is |
| returned as the value of the function. If not successful, -1 |
| is returned. */ |
| static int |
| rx_get_opcode_byte (void *handle) |
| { |
| struct rx_get_opcode_byte_handle *opcdata |
| = (struct rx_get_opcode_byte_handle *) handle; |
| int status; |
| gdb_byte byte; |
| |
| status = target_read_code (opcdata->pc, &byte, 1); |
| if (status == 0) |
| { |
| opcdata->pc += 1; |
| return byte; |
| } |
| else |
| return -1; |
| } |
| |
| /* Analyze a prologue starting at START_PC, going no further than |
| LIMIT_PC. Fill in RESULT as appropriate. */ |
| |
| static void |
| rx_analyze_prologue (CORE_ADDR start_pc, CORE_ADDR limit_pc, |
| enum rx_frame_type frame_type, |
| struct rx_prologue *result) |
| { |
| CORE_ADDR pc, next_pc; |
| int rn; |
| pv_t reg[RX_NUM_REGS]; |
| CORE_ADDR after_last_frame_setup_insn = start_pc; |
| |
| memset (result, 0, sizeof (*result)); |
| |
| result->frame_type = frame_type; |
| |
| for (rn = 0; rn < RX_NUM_REGS; rn++) |
| { |
| reg[rn] = pv_register (rn, 0); |
| result->reg_offset[rn] = 1; |
| } |
| |
| pv_area stack (RX_SP_REGNUM, gdbarch_addr_bit (current_inferior ()->arch ())); |
| |
| if (frame_type == RX_FRAME_TYPE_FAST_INTERRUPT) |
| { |
| /* This code won't do anything useful at present, but this is |
| what happens for fast interrupts. */ |
| reg[RX_BPSW_REGNUM] = reg[RX_PSW_REGNUM]; |
| reg[RX_BPC_REGNUM] = reg[RX_PC_REGNUM]; |
| } |
| else |
| { |
| /* When an exception occurs, the PSW is saved to the interrupt stack |
| first. */ |
| if (frame_type == RX_FRAME_TYPE_EXCEPTION) |
| { |
| reg[RX_SP_REGNUM] = pv_add_constant (reg[RX_SP_REGNUM], -4); |
| stack.store (reg[RX_SP_REGNUM], 4, reg[RX_PSW_REGNUM]); |
| } |
| |
| /* The call instruction (or an exception/interrupt) has saved the return |
| address on the stack. */ |
| reg[RX_SP_REGNUM] = pv_add_constant (reg[RX_SP_REGNUM], -4); |
| stack.store (reg[RX_SP_REGNUM], 4, reg[RX_PC_REGNUM]); |
| |
| } |
| |
| |
| pc = start_pc; |
| while (pc < limit_pc) |
| { |
| int bytes_read; |
| struct rx_get_opcode_byte_handle opcode_handle; |
| RX_Opcode_Decoded opc; |
| |
| opcode_handle.pc = pc; |
| bytes_read = rx_decode_opcode (pc, &opc, rx_get_opcode_byte, |
| &opcode_handle); |
| next_pc = pc + bytes_read; |
| |
| if (opc.id == RXO_pushm /* pushm r1, r2 */ |
| && opc.op[1].type == RX_Operand_Register |
| && opc.op[2].type == RX_Operand_Register) |
| { |
| int r1, r2; |
| int r; |
| |
| r1 = opc.op[1].reg; |
| r2 = opc.op[2].reg; |
| for (r = r2; r >= r1; r--) |
| { |
| reg[RX_SP_REGNUM] = pv_add_constant (reg[RX_SP_REGNUM], -4); |
| stack.store (reg[RX_SP_REGNUM], 4, reg[r]); |
| } |
| after_last_frame_setup_insn = next_pc; |
| } |
| else if (opc.id == RXO_mov /* mov.l rdst, rsrc */ |
| && opc.op[0].type == RX_Operand_Register |
| && opc.op[1].type == RX_Operand_Register |
| && opc.size == RX_Long) |
| { |
| int rdst, rsrc; |
| |
| rdst = opc.op[0].reg; |
| rsrc = opc.op[1].reg; |
| reg[rdst] = reg[rsrc]; |
| if (rdst == RX_FP_REGNUM && rsrc == RX_SP_REGNUM) |
| after_last_frame_setup_insn = next_pc; |
| } |
| else if (opc.id == RXO_mov /* mov.l rsrc, [-SP] */ |
| && opc.op[0].type == RX_Operand_Predec |
| && opc.op[0].reg == RX_SP_REGNUM |
| && opc.op[1].type == RX_Operand_Register |
| && opc.size == RX_Long) |
| { |
| int rsrc; |
| |
| rsrc = opc.op[1].reg; |
| reg[RX_SP_REGNUM] = pv_add_constant (reg[RX_SP_REGNUM], -4); |
| stack.store (reg[RX_SP_REGNUM], 4, reg[rsrc]); |
| after_last_frame_setup_insn = next_pc; |
| } |
| else if (opc.id == RXO_add /* add #const, rsrc, rdst */ |
| && opc.op[0].type == RX_Operand_Register |
| && opc.op[1].type == RX_Operand_Immediate |
| && opc.op[2].type == RX_Operand_Register) |
| { |
| int rdst = opc.op[0].reg; |
| int addend = opc.op[1].addend; |
| int rsrc = opc.op[2].reg; |
| reg[rdst] = pv_add_constant (reg[rsrc], addend); |
| /* Negative adjustments to the stack pointer or frame pointer |
| are (most likely) part of the prologue. */ |
| if ((rdst == RX_SP_REGNUM || rdst == RX_FP_REGNUM) && addend < 0) |
| after_last_frame_setup_insn = next_pc; |
| } |
| else if (opc.id == RXO_mov |
| && opc.op[0].type == RX_Operand_Indirect |
| && opc.op[1].type == RX_Operand_Register |
| && opc.size == RX_Long |
| && (opc.op[0].reg == RX_SP_REGNUM |
| || opc.op[0].reg == RX_FP_REGNUM) |
| && (RX_R1_REGNUM <= opc.op[1].reg |
| && opc.op[1].reg <= RX_R4_REGNUM)) |
| { |
| /* This moves an argument register to the stack. Don't |
| record it, but allow it to be a part of the prologue. */ |
| } |
| else if (opc.id == RXO_branch |
| && opc.op[0].type == RX_Operand_Immediate |
| && next_pc < opc.op[0].addend) |
| { |
| /* When a loop appears as the first statement of a function |
| body, gcc 4.x will use a BRA instruction to branch to the |
| loop condition checking code. This BRA instruction is |
| marked as part of the prologue. We therefore set next_pc |
| to this branch target and also stop the prologue scan. |
| The instructions at and beyond the branch target should |
| no longer be associated with the prologue. |
| |
| Note that we only consider forward branches here. We |
| presume that a forward branch is being used to skip over |
| a loop body. |
| |
| A backwards branch is covered by the default case below. |
| If we were to encounter a backwards branch, that would |
| most likely mean that we've scanned through a loop body. |
| We definitely want to stop the prologue scan when this |
| happens and that is precisely what is done by the default |
| case below. */ |
| |
| after_last_frame_setup_insn = opc.op[0].addend; |
| break; /* Scan no further if we hit this case. */ |
| } |
| else |
| { |
| /* Terminate the prologue scan. */ |
| break; |
| } |
| |
| pc = next_pc; |
| } |
| |
| /* Is the frame size (offset, really) a known constant? */ |
| if (pv_is_register (reg[RX_SP_REGNUM], RX_SP_REGNUM)) |
| result->frame_size = reg[RX_SP_REGNUM].k; |
| |
| /* Was the frame pointer initialized? */ |
| if (pv_is_register (reg[RX_FP_REGNUM], RX_SP_REGNUM)) |
| { |
| result->has_frame_ptr = 1; |
| result->frame_ptr_offset = reg[RX_FP_REGNUM].k; |
| } |
| |
| /* Record where all the registers were saved. */ |
| stack.scan (check_for_saved, (void *) result); |
| |
| result->prologue_end = after_last_frame_setup_insn; |
| } |
| |
| |
| /* Implement the "skip_prologue" gdbarch method. */ |
| static CORE_ADDR |
| rx_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc) |
| { |
| const char *name; |
| CORE_ADDR func_addr, func_end; |
| struct rx_prologue p; |
| |
| /* Try to find the extent of the function that contains PC. */ |
| if (!find_pc_partial_function (pc, &name, &func_addr, &func_end)) |
| return pc; |
| |
| /* The frame type doesn't matter here, since we only care about |
| where the prologue ends. We'll use RX_FRAME_TYPE_NORMAL. */ |
| rx_analyze_prologue (pc, func_end, RX_FRAME_TYPE_NORMAL, &p); |
| return p.prologue_end; |
| } |
| |
| /* Given a frame described by THIS_FRAME, decode the prologue of its |
| associated function if there is not cache entry as specified by |
| THIS_PROLOGUE_CACHE. Save the decoded prologue in the cache and |
| return that struct as the value of this function. */ |
| |
| static struct rx_prologue * |
| rx_analyze_frame_prologue (const frame_info_ptr &this_frame, |
| enum rx_frame_type frame_type, |
| void **this_prologue_cache) |
| { |
| if (!*this_prologue_cache) |
| { |
| CORE_ADDR func_start, stop_addr; |
| |
| *this_prologue_cache = FRAME_OBSTACK_ZALLOC (struct rx_prologue); |
| |
| func_start = get_frame_func (this_frame); |
| stop_addr = get_frame_pc (this_frame); |
| |
| /* If we couldn't find any function containing the PC, then |
| just initialize the prologue cache, but don't do anything. */ |
| if (!func_start) |
| stop_addr = func_start; |
| |
| rx_analyze_prologue (func_start, stop_addr, frame_type, |
| (struct rx_prologue *) *this_prologue_cache); |
| } |
| |
| return (struct rx_prologue *) *this_prologue_cache; |
| } |
| |
| /* Determine type of frame by scanning the function for a return |
| instruction. */ |
| |
| static enum rx_frame_type |
| rx_frame_type (const frame_info_ptr &this_frame, void **this_cache) |
| { |
| const char *name; |
| CORE_ADDR pc, start_pc, lim_pc; |
| int bytes_read; |
| struct rx_get_opcode_byte_handle opcode_handle; |
| RX_Opcode_Decoded opc; |
| |
| gdb_assert (this_cache != NULL); |
| |
| /* If we have a cached value, return it. */ |
| |
| if (*this_cache != NULL) |
| { |
| struct rx_prologue *p = (struct rx_prologue *) *this_cache; |
| |
| return p->frame_type; |
| } |
| |
| /* No cached value; scan the function. The frame type is cached in |
| rx_analyze_prologue / rx_analyze_frame_prologue. */ |
| |
| pc = get_frame_pc (this_frame); |
| |
| /* Attempt to find the last address in the function. If it cannot |
| be determined, set the limit to be a short ways past the frame's |
| pc. */ |
| if (!find_pc_partial_function (pc, &name, &start_pc, &lim_pc)) |
| lim_pc = pc + 20; |
| |
| while (pc < lim_pc) |
| { |
| opcode_handle.pc = pc; |
| bytes_read = rx_decode_opcode (pc, &opc, rx_get_opcode_byte, |
| &opcode_handle); |
| |
| if (bytes_read <= 0 || opc.id == RXO_rts) |
| return RX_FRAME_TYPE_NORMAL; |
| else if (opc.id == RXO_rtfi) |
| return RX_FRAME_TYPE_FAST_INTERRUPT; |
| else if (opc.id == RXO_rte) |
| return RX_FRAME_TYPE_EXCEPTION; |
| |
| pc += bytes_read; |
| } |
| |
| return RX_FRAME_TYPE_NORMAL; |
| } |
| |
| |
| /* Given the next frame and a prologue cache, return this frame's |
| base. */ |
| |
| static CORE_ADDR |
| rx_frame_base (const frame_info_ptr &this_frame, void **this_cache) |
| { |
| enum rx_frame_type frame_type = rx_frame_type (this_frame, this_cache); |
| struct rx_prologue *p |
| = rx_analyze_frame_prologue (this_frame, frame_type, this_cache); |
| |
| /* In functions that use alloca, the distance between the stack |
| pointer and the frame base varies dynamically, so we can't use |
| the SP plus static information like prologue analysis to find the |
| frame base. However, such functions must have a frame pointer, |
| to be able to restore the SP on exit. So whenever we do have a |
| frame pointer, use that to find the base. */ |
| if (p->has_frame_ptr) |
| { |
| CORE_ADDR fp = get_frame_register_unsigned (this_frame, RX_FP_REGNUM); |
| return fp - p->frame_ptr_offset; |
| } |
| else |
| { |
| CORE_ADDR sp = get_frame_register_unsigned (this_frame, RX_SP_REGNUM); |
| return sp - p->frame_size; |
| } |
| } |
| |
| /* Implement the "frame_this_id" method for unwinding frames. */ |
| |
| static void |
| rx_frame_this_id (const frame_info_ptr &this_frame, void **this_cache, |
| struct frame_id *this_id) |
| { |
| *this_id = frame_id_build (rx_frame_base (this_frame, this_cache), |
| get_frame_func (this_frame)); |
| } |
| |
| /* Implement the "frame_prev_register" method for unwinding frames. */ |
| |
| static struct value * |
| rx_frame_prev_register (const frame_info_ptr &this_frame, void **this_cache, |
| int regnum) |
| { |
| enum rx_frame_type frame_type = rx_frame_type (this_frame, this_cache); |
| struct rx_prologue *p |
| = rx_analyze_frame_prologue (this_frame, frame_type, this_cache); |
| CORE_ADDR frame_base = rx_frame_base (this_frame, this_cache); |
| |
| if (regnum == RX_SP_REGNUM) |
| { |
| if (frame_type == RX_FRAME_TYPE_EXCEPTION) |
| { |
| struct value *psw_val; |
| CORE_ADDR psw; |
| |
| psw_val = rx_frame_prev_register (this_frame, this_cache, |
| RX_PSW_REGNUM); |
| psw = extract_unsigned_integer |
| (psw_val->contents_all ().data (), 4, |
| gdbarch_byte_order (get_frame_arch (this_frame))); |
| |
| if ((psw & 0x20000 /* U bit */) != 0) |
| return rx_frame_prev_register (this_frame, this_cache, |
| RX_USP_REGNUM); |
| |
| /* Fall through for the case where U bit is zero. */ |
| } |
| |
| return frame_unwind_got_constant (this_frame, regnum, frame_base); |
| } |
| |
| if (frame_type == RX_FRAME_TYPE_FAST_INTERRUPT) |
| { |
| if (regnum == RX_PC_REGNUM) |
| return rx_frame_prev_register (this_frame, this_cache, |
| RX_BPC_REGNUM); |
| if (regnum == RX_PSW_REGNUM) |
| return rx_frame_prev_register (this_frame, this_cache, |
| RX_BPSW_REGNUM); |
| } |
| |
| /* If prologue analysis says we saved this register somewhere, |
| return a description of the stack slot holding it. */ |
| if (p->reg_offset[regnum] != 1) |
| return frame_unwind_got_memory (this_frame, regnum, |
| frame_base + p->reg_offset[regnum]); |
| |
| /* Otherwise, presume we haven't changed the value of this |
| register, and get it from the next frame. */ |
| return frame_unwind_got_register (this_frame, regnum, regnum); |
| } |
| |
| /* Return TRUE if the frame indicated by FRAME_TYPE is a normal frame. */ |
| |
| static int |
| normal_frame_p (enum rx_frame_type frame_type) |
| { |
| return (frame_type == RX_FRAME_TYPE_NORMAL); |
| } |
| |
| /* Return TRUE if the frame indicated by FRAME_TYPE is an exception |
| frame. */ |
| |
| static int |
| exception_frame_p (enum rx_frame_type frame_type) |
| { |
| return (frame_type == RX_FRAME_TYPE_EXCEPTION |
| || frame_type == RX_FRAME_TYPE_FAST_INTERRUPT); |
| } |
| |
| /* Common code used by both normal and exception frame sniffers. */ |
| |
| static int |
| rx_frame_sniffer_common (const struct frame_unwind *self, |
| const frame_info_ptr &this_frame, |
| void **this_cache, |
| int (*sniff_p)(enum rx_frame_type) ) |
| { |
| gdb_assert (this_cache != NULL); |
| |
| if (*this_cache == NULL) |
| { |
| enum rx_frame_type frame_type = rx_frame_type (this_frame, this_cache); |
| |
| if (sniff_p (frame_type)) |
| { |
| /* The call below will fill in the cache, including the frame |
| type. */ |
| (void) rx_analyze_frame_prologue (this_frame, frame_type, this_cache); |
| |
| return 1; |
| } |
| else |
| return 0; |
| } |
| else |
| { |
| struct rx_prologue *p = (struct rx_prologue *) *this_cache; |
| |
| return sniff_p (p->frame_type); |
| } |
| } |
| |
| /* Frame sniffer for normal (non-exception) frames. */ |
| |
| static int |
| rx_frame_sniffer (const struct frame_unwind *self, |
| const frame_info_ptr &this_frame, |
| void **this_cache) |
| { |
| return rx_frame_sniffer_common (self, this_frame, this_cache, |
| normal_frame_p); |
| } |
| |
| /* Frame sniffer for exception frames. */ |
| |
| static int |
| rx_exception_sniffer (const struct frame_unwind *self, |
| const frame_info_ptr &this_frame, |
| void **this_cache) |
| { |
| return rx_frame_sniffer_common (self, this_frame, this_cache, |
| exception_frame_p); |
| } |
| |
| /* Data structure for normal code using instruction-based prologue |
| analyzer. */ |
| |
| static const struct frame_unwind rx_frame_unwind = { |
| "rx prologue", |
| NORMAL_FRAME, |
| default_frame_unwind_stop_reason, |
| rx_frame_this_id, |
| rx_frame_prev_register, |
| NULL, |
| rx_frame_sniffer |
| }; |
| |
| /* Data structure for exception code using instruction-based prologue |
| analyzer. */ |
| |
| static const struct frame_unwind rx_exception_unwind = { |
| "rx exception", |
| /* SIGTRAMP_FRAME could be used here, but backtraces are less informative. */ |
| NORMAL_FRAME, |
| default_frame_unwind_stop_reason, |
| rx_frame_this_id, |
| rx_frame_prev_register, |
| NULL, |
| rx_exception_sniffer |
| }; |
| |
| /* Implement the "push_dummy_call" gdbarch method. */ |
| static CORE_ADDR |
| rx_push_dummy_call (struct gdbarch *gdbarch, struct value *function, |
| struct regcache *regcache, CORE_ADDR bp_addr, int nargs, |
| struct value **args, CORE_ADDR sp, |
| function_call_return_method return_method, |
| CORE_ADDR struct_addr) |
| { |
| enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); |
| int write_pass; |
| int sp_off = 0; |
| CORE_ADDR cfa; |
| int num_register_candidate_args; |
| |
| struct type *func_type = function->type (); |
| |
| /* Dereference function pointer types. */ |
| while (func_type->code () == TYPE_CODE_PTR) |
| func_type = func_type->target_type (); |
| |
| /* The end result had better be a function or a method. */ |
| gdb_assert (func_type->code () == TYPE_CODE_FUNC |
| || func_type->code () == TYPE_CODE_METHOD); |
| |
| /* Functions with a variable number of arguments have all of their |
| variable arguments and the last non-variable argument passed |
| on the stack. |
| |
| Otherwise, we can pass up to four arguments on the stack. |
| |
| Once computed, we leave this value alone. I.e. we don't update |
| it in case of a struct return going in a register or an argument |
| requiring multiple registers, etc. We rely instead on the value |
| of the ``arg_reg'' variable to get these other details correct. */ |
| |
| if (func_type->has_varargs ()) |
| num_register_candidate_args = func_type->num_fields () - 1; |
| else |
| num_register_candidate_args = 4; |
| |
| /* We make two passes; the first does the stack allocation, |
| the second actually stores the arguments. */ |
| for (write_pass = 0; write_pass <= 1; write_pass++) |
| { |
| int i; |
| int arg_reg = RX_R1_REGNUM; |
| |
| if (write_pass) |
| sp = align_down (sp - sp_off, 4); |
| sp_off = 0; |
| |
| if (return_method == return_method_struct) |
| { |
| struct type *return_type = func_type->target_type (); |
| |
| gdb_assert (return_type->code () == TYPE_CODE_STRUCT |
| || func_type->code () == TYPE_CODE_UNION); |
| |
| if (return_type->length () > 16 |
| || return_type->length () % 4 != 0) |
| { |
| if (write_pass) |
| regcache_cooked_write_unsigned (regcache, RX_R15_REGNUM, |
| struct_addr); |
| } |
| } |
| |
| /* Push the arguments. */ |
| for (i = 0; i < nargs; i++) |
| { |
| struct value *arg = args[i]; |
| const gdb_byte *arg_bits = arg->contents_all ().data (); |
| struct type *arg_type = check_typedef (arg->type ()); |
| ULONGEST arg_size = arg_type->length (); |
| |
| if (i == 0 && struct_addr != 0 |
| && return_method != return_method_struct |
| && arg_type->code () == TYPE_CODE_PTR |
| && extract_unsigned_integer (arg_bits, 4, |
| byte_order) == struct_addr) |
| { |
| /* This argument represents the address at which C++ (and |
| possibly other languages) store their return value. |
| Put this value in R15. */ |
| if (write_pass) |
| regcache_cooked_write_unsigned (regcache, RX_R15_REGNUM, |
| struct_addr); |
| } |
| else if (arg_type->code () != TYPE_CODE_STRUCT |
| && arg_type->code () != TYPE_CODE_UNION |
| && arg_size <= 8) |
| { |
| /* Argument is a scalar. */ |
| if (arg_size == 8) |
| { |
| if (i < num_register_candidate_args |
| && arg_reg <= RX_R4_REGNUM - 1) |
| { |
| /* If argument registers are going to be used to pass |
| an 8 byte scalar, the ABI specifies that two registers |
| must be available. */ |
| if (write_pass) |
| { |
| regcache_cooked_write_unsigned (regcache, arg_reg, |
| extract_unsigned_integer |
| (arg_bits, 4, |
| byte_order)); |
| regcache_cooked_write_unsigned (regcache, |
| arg_reg + 1, |
| extract_unsigned_integer |
| (arg_bits + 4, 4, |
| byte_order)); |
| } |
| arg_reg += 2; |
| } |
| else |
| { |
| sp_off = align_up (sp_off, 4); |
| /* Otherwise, pass the 8 byte scalar on the stack. */ |
| if (write_pass) |
| write_memory (sp + sp_off, arg_bits, 8); |
| sp_off += 8; |
| } |
| } |
| else |
| { |
| ULONGEST u; |
| |
| gdb_assert (arg_size <= 4); |
| |
| u = |
| extract_unsigned_integer (arg_bits, arg_size, byte_order); |
| |
| if (i < num_register_candidate_args |
| && arg_reg <= RX_R4_REGNUM) |
| { |
| if (write_pass) |
| regcache_cooked_write_unsigned (regcache, arg_reg, u); |
| arg_reg += 1; |
| } |
| else |
| { |
| int p_arg_size = 4; |
| |
| if (func_type->is_prototyped () |
| && i < func_type->num_fields ()) |
| { |
| struct type *p_arg_type = |
| func_type->field (i).type (); |
| p_arg_size = p_arg_type->length (); |
| } |
| |
| sp_off = align_up (sp_off, p_arg_size); |
| |
| if (write_pass) |
| write_memory_unsigned_integer (sp + sp_off, |
| p_arg_size, byte_order, |
| u); |
| sp_off += p_arg_size; |
| } |
| } |
| } |
| else |
| { |
| /* Argument is a struct or union. Pass as much of the struct |
| in registers, if possible. Pass the rest on the stack. */ |
| while (arg_size > 0) |
| { |
| if (i < num_register_candidate_args |
| && arg_reg <= RX_R4_REGNUM |
| && arg_size <= 4 * (RX_R4_REGNUM - arg_reg + 1) |
| && arg_size % 4 == 0) |
| { |
| int len = std::min (arg_size, (ULONGEST) 4); |
| |
| if (write_pass) |
| regcache_cooked_write_unsigned (regcache, arg_reg, |
| extract_unsigned_integer |
| (arg_bits, len, |
| byte_order)); |
| arg_bits += len; |
| arg_size -= len; |
| arg_reg++; |
| } |
| else |
| { |
| sp_off = align_up (sp_off, 4); |
| if (write_pass) |
| write_memory (sp + sp_off, arg_bits, arg_size); |
| sp_off += align_up (arg_size, 4); |
| arg_size = 0; |
| } |
| } |
| } |
| } |
| } |
| |
| /* Keep track of the stack address prior to pushing the return address. |
| This is the value that we'll return. */ |
| cfa = sp; |
| |
| /* Push the return address. */ |
| sp = sp - 4; |
| write_memory_unsigned_integer (sp, 4, byte_order, bp_addr); |
| |
| /* Update the stack pointer. */ |
| regcache_cooked_write_unsigned (regcache, RX_SP_REGNUM, sp); |
| |
| return cfa; |
| } |
| |
| /* Implement the "return_value" gdbarch method. */ |
| static enum return_value_convention |
| rx_return_value (struct gdbarch *gdbarch, |
| struct value *function, |
| struct type *valtype, |
| struct regcache *regcache, |
| gdb_byte *readbuf, const gdb_byte *writebuf) |
| { |
| enum bfd_endian byte_order = gdbarch_byte_order (gdbarch); |
| ULONGEST valtype_len = valtype->length (); |
| |
| if (valtype->length () > 16 |
| || ((valtype->code () == TYPE_CODE_STRUCT |
| || valtype->code () == TYPE_CODE_UNION) |
| && valtype->length () % 4 != 0)) |
| return RETURN_VALUE_STRUCT_CONVENTION; |
| |
| if (readbuf) |
| { |
| ULONGEST u; |
| int argreg = RX_R1_REGNUM; |
| int offset = 0; |
| |
| while (valtype_len > 0) |
| { |
| int len = std::min (valtype_len, (ULONGEST) 4); |
| |
| regcache_cooked_read_unsigned (regcache, argreg, &u); |
| store_unsigned_integer (readbuf + offset, len, byte_order, u); |
| valtype_len -= len; |
| offset += len; |
| argreg++; |
| } |
| } |
| |
| if (writebuf) |
| { |
| ULONGEST u; |
| int argreg = RX_R1_REGNUM; |
| int offset = 0; |
| |
| while (valtype_len > 0) |
| { |
| int len = std::min (valtype_len, (ULONGEST) 4); |
| |
| u = extract_unsigned_integer (writebuf + offset, len, byte_order); |
| regcache_cooked_write_unsigned (regcache, argreg, u); |
| valtype_len -= len; |
| offset += len; |
| argreg++; |
| } |
| } |
| |
| return RETURN_VALUE_REGISTER_CONVENTION; |
| } |
| |
| constexpr gdb_byte rx_break_insn[] = { 0x00 }; |
| |
| typedef BP_MANIPULATION (rx_break_insn) rx_breakpoint; |
| |
| /* Implement the dwarf_reg_to_regnum" gdbarch method. */ |
| |
| static int |
| rx_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg) |
| { |
| if (0 <= reg && reg <= 15) |
| return reg; |
| else if (reg == 16) |
| return RX_PSW_REGNUM; |
| else if (reg == 17) |
| return RX_PC_REGNUM; |
| else |
| return -1; |
| } |
| |
| /* Allocate and initialize a gdbarch object. */ |
| static struct gdbarch * |
| rx_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) |
| { |
| int elf_flags; |
| tdesc_arch_data_up tdesc_data; |
| const struct target_desc *tdesc = info.target_desc; |
| |
| /* Extract the elf_flags if available. */ |
| if (info.abfd != NULL |
| && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour) |
| elf_flags = elf_elfheader (info.abfd)->e_flags; |
| else |
| elf_flags = 0; |
| |
| |
| /* Try to find the architecture in the list of already defined |
| architectures. */ |
| for (arches = gdbarch_list_lookup_by_info (arches, &info); |
| arches != NULL; |
| arches = gdbarch_list_lookup_by_info (arches->next, &info)) |
| { |
| rx_gdbarch_tdep *tdep |
| = gdbarch_tdep<rx_gdbarch_tdep> (arches->gdbarch); |
| |
| if (tdep->elf_flags != elf_flags) |
| continue; |
| |
| return arches->gdbarch; |
| } |
| |
| if (tdesc == NULL) |
| tdesc = tdesc_rx; |
| |
| /* Check any target description for validity. */ |
| if (tdesc_has_registers (tdesc)) |
| { |
| const struct tdesc_feature *feature; |
| bool valid_p = true; |
| |
| feature = tdesc_find_feature (tdesc, "org.gnu.gdb.rx.core"); |
| |
| if (feature != NULL) |
| { |
| tdesc_data = tdesc_data_alloc (); |
| for (int i = 0; i < RX_NUM_REGS; i++) |
| valid_p &= tdesc_numbered_register (feature, tdesc_data.get (), i, |
| rx_register_names[i]); |
| } |
| |
| if (!valid_p) |
| return NULL; |
| } |
| |
| gdb_assert(tdesc_data != NULL); |
| |
| gdbarch *gdbarch |
| = gdbarch_alloc (&info, gdbarch_tdep_up (new rx_gdbarch_tdep)); |
| rx_gdbarch_tdep *tdep = gdbarch_tdep<rx_gdbarch_tdep> (gdbarch); |
| |
| tdep->elf_flags = elf_flags; |
| |
| set_gdbarch_num_regs (gdbarch, RX_NUM_REGS); |
| tdesc_use_registers (gdbarch, tdesc, std::move (tdesc_data)); |
| |
| set_gdbarch_num_pseudo_regs (gdbarch, 0); |
| set_gdbarch_pc_regnum (gdbarch, RX_PC_REGNUM); |
| set_gdbarch_sp_regnum (gdbarch, RX_SP_REGNUM); |
| set_gdbarch_inner_than (gdbarch, core_addr_lessthan); |
| set_gdbarch_decr_pc_after_break (gdbarch, 1); |
| set_gdbarch_breakpoint_kind_from_pc (gdbarch, rx_breakpoint::kind_from_pc); |
| set_gdbarch_sw_breakpoint_from_kind (gdbarch, rx_breakpoint::bp_from_kind); |
| set_gdbarch_skip_prologue (gdbarch, rx_skip_prologue); |
| |
| /* Target builtin data types. */ |
| set_gdbarch_char_signed (gdbarch, 0); |
| set_gdbarch_short_bit (gdbarch, 16); |
| set_gdbarch_int_bit (gdbarch, 32); |
| set_gdbarch_long_bit (gdbarch, 32); |
| set_gdbarch_long_long_bit (gdbarch, 64); |
| set_gdbarch_ptr_bit (gdbarch, 32); |
| set_gdbarch_float_bit (gdbarch, 32); |
| set_gdbarch_float_format (gdbarch, floatformats_ieee_single); |
| |
| if (elf_flags & E_FLAG_RX_64BIT_DOUBLES) |
| { |
| set_gdbarch_double_bit (gdbarch, 64); |
| set_gdbarch_long_double_bit (gdbarch, 64); |
| set_gdbarch_double_format (gdbarch, floatformats_ieee_double); |
| set_gdbarch_long_double_format (gdbarch, floatformats_ieee_double); |
| } |
| else |
| { |
| set_gdbarch_double_bit (gdbarch, 32); |
| set_gdbarch_long_double_bit (gdbarch, 32); |
| set_gdbarch_double_format (gdbarch, floatformats_ieee_single); |
| set_gdbarch_long_double_format (gdbarch, floatformats_ieee_single); |
| } |
| |
| /* DWARF register mapping. */ |
| set_gdbarch_dwarf2_reg_to_regnum (gdbarch, rx_dwarf_reg_to_regnum); |
| |
| /* Frame unwinding. */ |
| frame_unwind_append_unwinder (gdbarch, &rx_exception_unwind); |
| dwarf2_append_unwinders (gdbarch); |
| frame_unwind_append_unwinder (gdbarch, &rx_frame_unwind); |
| |
| /* Methods setting up a dummy call, and extracting the return value from |
| a call. */ |
| set_gdbarch_push_dummy_call (gdbarch, rx_push_dummy_call); |
| set_gdbarch_return_value (gdbarch, rx_return_value); |
| |
| /* Virtual tables. */ |
| set_gdbarch_vbit_in_delta (gdbarch, 1); |
| |
| return gdbarch; |
| } |
| |
| /* Register the above initialization routine. */ |
| |
| void _initialize_rx_tdep (); |
| void |
| _initialize_rx_tdep () |
| { |
| gdbarch_register (bfd_arch_rx, rx_gdbarch_init); |
| initialize_tdesc_rx (); |
| } |