| /* hist.c - Histogram related operations. |
| |
| Copyright (C) 1999-2024 Free Software Foundation, Inc. |
| |
| This file is part of GNU Binutils. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA |
| 02110-1301, USA. */ |
| |
| #include "gprof.h" |
| #include "libiberty.h" |
| #include "search_list.h" |
| #include "source.h" |
| #include "symtab.h" |
| #include "corefile.h" |
| #include "gmon_io.h" |
| #include "gmon_out.h" |
| #include "hist.h" |
| #include "sym_ids.h" |
| #include "utils.h" |
| #include "math.h" |
| #include "stdio.h" |
| #include "stdlib.h" |
| |
| #define UNITS_TO_CODE (offset_to_code / sizeof(UNIT)) |
| |
| static void scale_and_align_entries (void); |
| static void print_header (int); |
| static void print_line (Sym *, double); |
| static int cmp_time (const void *, const void *); |
| |
| /* Declarations of automatically generated functions to output blurbs. */ |
| extern void flat_blurb (FILE * fp); |
| |
| static histogram *find_histogram (bfd_vma lowpc, bfd_vma highpc); |
| static histogram *find_histogram_for_pc (bfd_vma pc); |
| |
| histogram * histograms; |
| unsigned num_histograms; |
| double hist_scale; |
| static char hist_dimension[16] = "seconds"; |
| static char hist_dimension_abbrev = 's'; |
| |
| static double accum_time; /* Accumulated time so far for print_line(). */ |
| static double total_time; /* Total time for all routines. */ |
| |
| /* Table of SI prefixes for powers of 10 (used to automatically |
| scale some of the values in the flat profile). */ |
| const struct |
| { |
| char prefix; |
| double scale; |
| } |
| SItab[] = |
| { |
| { 'T', 1e-12 }, /* tera */ |
| { 'G', 1e-09 }, /* giga */ |
| { 'M', 1e-06 }, /* mega */ |
| { 'K', 1e-03 }, /* kilo */ |
| { ' ', 1e-00 }, |
| { 'm', 1e+03 }, /* milli */ |
| { 'u', 1e+06 }, /* micro */ |
| { 'n', 1e+09 }, /* nano */ |
| { 'p', 1e+12 }, /* pico */ |
| { 'f', 1e+15 }, /* femto */ |
| { 'a', 1e+18 } /* ato */ |
| }; |
| |
| /* Reads just the header part of histogram record into |
| *RECORD from IFP. FILENAME is the name of IFP and |
| is provided for formatting error messages only. |
| |
| If FIRST is non-zero, sets global variables HZ, HIST_DIMENSION, |
| HIST_DIMENSION_ABBREV, HIST_SCALE. If FIRST is zero, checks |
| that the new histogram is compatible with already-set values |
| of those variables and emits an error if that's not so. */ |
| static void |
| read_histogram_header (histogram *record, |
| FILE *ifp, const char *filename, |
| int first) |
| { |
| unsigned int profrate; |
| char n_hist_dimension[15]; |
| char n_hist_dimension_abbrev; |
| double n_hist_scale; |
| |
| if (gmon_io_read_vma (ifp, &record->lowpc) |
| || gmon_io_read_vma (ifp, &record->highpc) |
| || gmon_io_read_32 (ifp, &record->num_bins) |
| || gmon_io_read_32 (ifp, &profrate) |
| || gmon_io_read (ifp, n_hist_dimension, 15) |
| || gmon_io_read (ifp, &n_hist_dimension_abbrev, 1)) |
| { |
| fprintf (stderr, _("%s: %s: unexpected end of file\n"), |
| whoami, filename); |
| |
| done (1); |
| } |
| |
| n_hist_scale = (double)((record->highpc - record->lowpc) / sizeof (UNIT)) |
| / record->num_bins; |
| |
| if (first) |
| { |
| /* We don't try to veryfy profrate is the same for all histogram |
| records. If we have two histogram records for the same |
| address range and profiling samples is done as often |
| as possible as opposed on timer, then the actual profrate will |
| be slightly different. Most of the time the difference does not |
| matter and insisting that profiling rate is exactly the same |
| will only create inconvenient. */ |
| hz = profrate; |
| memcpy (hist_dimension, n_hist_dimension, 15); |
| hist_dimension_abbrev = n_hist_dimension_abbrev; |
| hist_scale = n_hist_scale; |
| } |
| else |
| { |
| if (strncmp (n_hist_dimension, hist_dimension, 15) != 0) |
| { |
| fprintf (stderr, |
| _("%s: dimension unit changed between histogram records\n" |
| "%s: from '%s'\n" |
| "%s: to '%s'\n"), |
| whoami, whoami, hist_dimension, whoami, n_hist_dimension); |
| done (1); |
| } |
| |
| if (n_hist_dimension_abbrev != hist_dimension_abbrev) |
| { |
| fprintf (stderr, |
| _("%s: dimension abbreviation changed between histogram records\n" |
| "%s: from '%c'\n" |
| "%s: to '%c'\n"), |
| whoami, whoami, hist_dimension_abbrev, whoami, n_hist_dimension_abbrev); |
| done (1); |
| } |
| |
| /* The only reason we require the same scale for histograms is that |
| there's code (notably printing code), that prints units, |
| and it would be very confusing to have one unit mean different |
| things for different functions. */ |
| if (fabs (hist_scale - n_hist_scale) > 0.000001) |
| { |
| fprintf (stderr, |
| _("%s: different scales in histogram records"), |
| whoami); |
| done (1); |
| } |
| } |
| } |
| |
| /* Read the histogram from file IFP. FILENAME is the name of IFP and |
| is provided for formatting error messages only. */ |
| |
| void |
| hist_read_rec (FILE * ifp, const char *filename) |
| { |
| bfd_vma lowpc, highpc; |
| histogram n_record; |
| histogram *record, *existing_record; |
| unsigned i; |
| |
| /* 1. Read the header and see if there's existing record for the |
| same address range and that there are no overlapping records. */ |
| read_histogram_header (&n_record, ifp, filename, num_histograms == 0); |
| |
| existing_record = find_histogram (n_record.lowpc, n_record.highpc); |
| if (existing_record) |
| { |
| record = existing_record; |
| } |
| else |
| { |
| /* If this record overlaps, but does not completely match an existing |
| record, it's an error. */ |
| lowpc = n_record.lowpc; |
| highpc = n_record.highpc; |
| hist_clip_symbol_address (&lowpc, &highpc); |
| if (lowpc != highpc) |
| { |
| fprintf (stderr, |
| _("%s: overlapping histogram records\n"), |
| whoami); |
| done (1); |
| } |
| |
| /* This is new record. Add it to global array and allocate space for |
| the samples. */ |
| histograms = (struct histogram *) |
| xrealloc (histograms, sizeof (histogram) * (num_histograms + 1)); |
| memcpy (histograms + num_histograms, |
| &n_record, sizeof (histogram)); |
| record = &histograms[num_histograms]; |
| ++num_histograms; |
| |
| record->sample = (int *) xmalloc (record->num_bins |
| * sizeof (record->sample[0])); |
| memset (record->sample, 0, record->num_bins * sizeof (record->sample[0])); |
| } |
| |
| /* 2. We have either a new record (with zeroed histogram data), or an existing |
| record with some data in the histogram already. Read new data into the |
| record, adding hit counts. */ |
| |
| DBG (SAMPLEDEBUG, |
| printf ("[hist_read_rec] n_lowpc 0x%lx n_highpc 0x%lx ncnt %u\n", |
| (unsigned long) record->lowpc, (unsigned long) record->highpc, |
| record->num_bins)); |
| |
| for (i = 0; i < record->num_bins; ++i) |
| { |
| UNIT count; |
| if (fread (&count[0], sizeof (count), 1, ifp) != 1) |
| { |
| fprintf (stderr, |
| _("%s: %s: unexpected EOF after reading %u of %u samples\n"), |
| whoami, filename, i, record->num_bins); |
| done (1); |
| } |
| record->sample[i] += bfd_get_16 (core_bfd, (bfd_byte *) & count[0]); |
| DBG (SAMPLEDEBUG, |
| printf ("[hist_read_rec] 0x%lx: %u\n", |
| (unsigned long) (record->lowpc |
| + i * (record->highpc - record->lowpc) |
| / record->num_bins), |
| record->sample[i])); |
| } |
| } |
| |
| |
| /* Write all execution histograms file OFP. FILENAME is the name |
| of OFP and is provided for formatting error-messages only. */ |
| |
| void |
| hist_write_hist (FILE * ofp, const char *filename) |
| { |
| UNIT count; |
| unsigned int i, r; |
| |
| for (r = 0; r < num_histograms; ++r) |
| { |
| histogram *record = &histograms[r]; |
| |
| /* Write header. */ |
| |
| if (gmon_io_write_8 (ofp, GMON_TAG_TIME_HIST) |
| || gmon_io_write_vma (ofp, record->lowpc) |
| || gmon_io_write_vma (ofp, record->highpc) |
| || gmon_io_write_32 (ofp, record->num_bins) |
| || gmon_io_write_32 (ofp, hz) |
| || gmon_io_write (ofp, hist_dimension, 15) |
| || gmon_io_write (ofp, &hist_dimension_abbrev, 1)) |
| { |
| perror (filename); |
| done (1); |
| } |
| |
| for (i = 0; i < record->num_bins; ++i) |
| { |
| bfd_put_16 (core_bfd, (bfd_vma) record->sample[i], (bfd_byte *) &count[0]); |
| |
| if (fwrite (&count[0], sizeof (count), 1, ofp) != 1) |
| { |
| perror (filename); |
| done (1); |
| } |
| } |
| } |
| } |
| |
| /* Calculate scaled entry point addresses (to save time in |
| hist_assign_samples), and, on architectures that have procedure |
| entry masks at the start of a function, possibly push the scaled |
| entry points over the procedure entry mask, if it turns out that |
| the entry point is in one bin and the code for a routine is in the |
| next bin. */ |
| |
| static void |
| scale_and_align_entries (void) |
| { |
| Sym *sym; |
| bfd_vma bin_of_entry; |
| bfd_vma bin_of_code; |
| |
| for (sym = symtab.base; sym < symtab.limit; sym++) |
| { |
| histogram *r = find_histogram_for_pc (sym->addr); |
| |
| sym->hist.scaled_addr = sym->addr / sizeof (UNIT); |
| |
| if (r) |
| { |
| bin_of_entry = (sym->hist.scaled_addr - r->lowpc) / hist_scale; |
| bin_of_code = ((sym->hist.scaled_addr + UNITS_TO_CODE - r->lowpc) |
| / hist_scale); |
| if (bin_of_entry < bin_of_code) |
| { |
| DBG (SAMPLEDEBUG, |
| printf ("[scale_and_align_entries] pushing 0x%lx to 0x%lx\n", |
| (unsigned long) sym->hist.scaled_addr, |
| (unsigned long) (sym->hist.scaled_addr |
| + UNITS_TO_CODE))); |
| sym->hist.scaled_addr += UNITS_TO_CODE; |
| } |
| } |
| } |
| } |
| |
| |
| /* Assign samples to the symbol to which they belong. |
| |
| Histogram bin I covers some address range [BIN_LOWPC,BIN_HIGH_PC) |
| which may overlap one more symbol address ranges. If a symbol |
| overlaps with the bin's address range by O percent, then O percent |
| of the bin's count is credited to that symbol. |
| |
| There are three cases as to where BIN_LOW_PC and BIN_HIGH_PC can be |
| with respect to the symbol's address range [SYM_LOW_PC, |
| SYM_HIGH_PC) as shown in the following diagram. OVERLAP computes |
| the distance (in UNITs) between the arrows, the fraction of the |
| sample that is to be credited to the symbol which starts at |
| SYM_LOW_PC. |
| |
| sym_low_pc sym_high_pc |
| | | |
| v v |
| |
| +-----------------------------------------------+ |
| | | |
| | ->| |<- ->| |<- ->| |<- | |
| | | | | | | |
| +---------+ +---------+ +---------+ |
| |
| ^ ^ ^ ^ ^ ^ |
| | | | | | | |
| bin_low_pc bin_high_pc bin_low_pc bin_high_pc bin_low_pc bin_high_pc |
| |
| For the VAX we assert that samples will never fall in the first two |
| bytes of any routine, since that is the entry mask, thus we call |
| scale_and_align_entries() to adjust the entry points if the entry |
| mask falls in one bin but the code for the routine doesn't start |
| until the next bin. In conjunction with the alignment of routine |
| addresses, this should allow us to have only one sample for every |
| four bytes of text space and never have any overlap (the two end |
| cases, above). */ |
| |
| static void |
| hist_assign_samples_1 (histogram *r) |
| { |
| bfd_vma bin_low_pc, bin_high_pc; |
| bfd_vma sym_low_pc, sym_high_pc; |
| bfd_vma overlap, addr; |
| unsigned int bin_count; |
| unsigned int i, j, k; |
| double count_time, credit; |
| |
| bfd_vma lowpc = r->lowpc / sizeof (UNIT); |
| |
| /* Iterate over all sample bins. */ |
| for (i = 0, k = 1; i < r->num_bins; ++i) |
| { |
| bin_count = r->sample[i]; |
| if (! bin_count) |
| continue; |
| |
| bin_low_pc = lowpc + (bfd_vma) (hist_scale * i); |
| bin_high_pc = lowpc + (bfd_vma) (hist_scale * (i + 1)); |
| count_time = bin_count; |
| |
| DBG (SAMPLEDEBUG, |
| printf ( |
| "[assign_samples] bin_low_pc=0x%lx, bin_high_pc=0x%lx, bin_count=%u\n", |
| (unsigned long) (sizeof (UNIT) * bin_low_pc), |
| (unsigned long) (sizeof (UNIT) * bin_high_pc), |
| bin_count)); |
| total_time += count_time; |
| |
| /* Credit all symbols that are covered by bin I. |
| |
| PR gprof/13325: Make sure that K does not get decremented |
| and J will never be less than 0. */ |
| for (j = k - 1; j < symtab.len; k = ++j) |
| { |
| sym_low_pc = symtab.base[j].hist.scaled_addr; |
| sym_high_pc = symtab.base[j + 1].hist.scaled_addr; |
| |
| /* If high end of bin is below entry address, |
| go for next bin. */ |
| if (bin_high_pc < sym_low_pc) |
| break; |
| |
| /* If low end of bin is above high end of symbol, |
| go for next symbol. */ |
| if (bin_low_pc >= sym_high_pc) |
| continue; |
| |
| overlap = |
| MIN (bin_high_pc, sym_high_pc) - MAX (bin_low_pc, sym_low_pc); |
| if (overlap > 0) |
| { |
| DBG (SAMPLEDEBUG, |
| printf ( |
| "[assign_samples] [0x%lx,0x%lx) %s gets %f ticks %ld overlap\n", |
| (unsigned long) symtab.base[j].addr, |
| (unsigned long) (sizeof (UNIT) * sym_high_pc), |
| symtab.base[j].name, overlap * count_time / hist_scale, |
| (long) overlap)); |
| |
| addr = symtab.base[j].addr; |
| credit = overlap * count_time / hist_scale; |
| |
| /* Credit symbol if it appears in INCL_FLAT or that |
| table is empty and it does not appear it in |
| EXCL_FLAT. */ |
| if (sym_lookup (&syms[INCL_FLAT], addr) |
| || (syms[INCL_FLAT].len == 0 |
| && !sym_lookup (&syms[EXCL_FLAT], addr))) |
| { |
| symtab.base[j].hist.time += credit; |
| } |
| else |
| { |
| total_time -= credit; |
| } |
| } |
| } |
| } |
| |
| DBG (SAMPLEDEBUG, printf ("[assign_samples] total_time %f\n", |
| total_time)); |
| } |
| |
| /* Calls 'hist_assign_sampes_1' for all histogram records read so far. */ |
| void |
| hist_assign_samples (void) |
| { |
| unsigned i; |
| |
| scale_and_align_entries (); |
| |
| for (i = 0; i < num_histograms; ++i) |
| hist_assign_samples_1 (&histograms[i]); |
| |
| } |
| |
| /* Print header for flag histogram profile. */ |
| |
| static void |
| print_header (int prefix) |
| { |
| char unit[64]; |
| |
| sprintf (unit, _("%c%c/call"), prefix, hist_dimension_abbrev); |
| |
| if (bsd_style_output) |
| { |
| printf (_("\ngranularity: each sample hit covers %ld byte(s)"), |
| (long) hist_scale * (long) sizeof (UNIT)); |
| if (total_time > 0.0) |
| { |
| printf (_(" for %.2f%% of %.2f %s\n\n"), |
| 100.0 / total_time, total_time / hz, hist_dimension); |
| } |
| } |
| else |
| { |
| printf (_("\nEach sample counts as %g %s.\n"), 1.0 / hz, hist_dimension); |
| } |
| |
| if (total_time <= 0.0) |
| { |
| printf (_(" no time accumulated\n\n")); |
| |
| /* This doesn't hurt since all the numerators will be zero. */ |
| total_time = 1.0; |
| } |
| |
| printf ("%5.5s %10.10s %8.8s %8.8s %8.8s %8.8s %-8.8s\n", |
| "% ", _("cumulative"), _("self "), "", _("self "), _("total "), |
| ""); |
| printf ("%5.5s %9.9s %8.8s %8.8s %8.8s %8.8s %-8.8s\n", |
| _("time"), hist_dimension, hist_dimension, _("calls"), unit, unit, |
| _("name")); |
| } |
| |
| |
| static void |
| print_line (Sym *sym, double scale) |
| { |
| if (ignore_zeros && sym->ncalls == 0 && sym->hist.time == 0) |
| return; |
| |
| accum_time += sym->hist.time; |
| |
| if (bsd_style_output) |
| printf ("%5.1f %10.2f %8.2f", |
| total_time > 0.0 ? 100 * sym->hist.time / total_time : 0.0, |
| accum_time / hz, sym->hist.time / hz); |
| else |
| printf ("%6.2f %9.2f %8.2f", |
| total_time > 0.0 ? 100 * sym->hist.time / total_time : 0.0, |
| accum_time / hz, sym->hist.time / hz); |
| |
| if (sym->ncalls != 0) |
| printf (" %8lu %8.2f %8.2f ", |
| sym->ncalls, scale * sym->hist.time / hz / sym->ncalls, |
| scale * (sym->hist.time + sym->cg.child_time) / hz / sym->ncalls); |
| else |
| printf (" %8.8s %8.8s %8.8s ", "", "", ""); |
| |
| if (bsd_style_output) |
| print_name (sym); |
| else |
| print_name_only (sym); |
| |
| printf ("\n"); |
| } |
| |
| |
| /* Compare LP and RP. The primary comparison key is execution time, |
| the secondary is number of invocation, and the tertiary is the |
| lexicographic order of the function names. */ |
| |
| static int |
| cmp_time (const void *lp, const void *rp) |
| { |
| const Sym *left = *(const Sym **) lp; |
| const Sym *right = *(const Sym **) rp; |
| double time_diff; |
| |
| time_diff = right->hist.time - left->hist.time; |
| |
| if (time_diff > 0.0) |
| return 1; |
| |
| if (time_diff < 0.0) |
| return -1; |
| |
| if (right->ncalls > left->ncalls) |
| return 1; |
| |
| if (right->ncalls < left->ncalls) |
| return -1; |
| |
| return strcmp (left->name, right->name); |
| } |
| |
| |
| /* Print the flat histogram profile. */ |
| |
| void |
| hist_print (void) |
| { |
| Sym **time_sorted_syms, *top_dog, *sym; |
| unsigned int sym_index; |
| unsigned log_scale; |
| double top_time; |
| bfd_vma addr; |
| |
| if (first_output) |
| first_output = false; |
| else |
| printf ("\f\n"); |
| |
| accum_time = 0.0; |
| |
| if (bsd_style_output) |
| { |
| if (print_descriptions) |
| { |
| printf (_("\n\n\nflat profile:\n")); |
| flat_blurb (stdout); |
| } |
| } |
| else |
| { |
| printf (_("Flat profile:\n")); |
| } |
| |
| /* Sort the symbol table by time (call-count and name as secondary |
| and tertiary keys). */ |
| time_sorted_syms = (Sym **) xmalloc (symtab.len * sizeof (Sym *)); |
| |
| for (sym_index = 0; sym_index < symtab.len; ++sym_index) |
| time_sorted_syms[sym_index] = &symtab.base[sym_index]; |
| |
| qsort (time_sorted_syms, symtab.len, sizeof (Sym *), cmp_time); |
| |
| if (bsd_style_output) |
| { |
| log_scale = 5; /* Milli-seconds is BSD-default. */ |
| } |
| else |
| { |
| /* Search for symbol with highest per-call |
| execution time and scale accordingly. */ |
| log_scale = 0; |
| top_dog = 0; |
| top_time = 0.0; |
| |
| for (sym_index = 0; sym_index < symtab.len; ++sym_index) |
| { |
| sym = time_sorted_syms[sym_index]; |
| |
| if (sym->ncalls != 0) |
| { |
| double call_time; |
| |
| call_time = (sym->hist.time + sym->cg.child_time) / sym->ncalls; |
| |
| if (call_time > top_time) |
| { |
| top_dog = sym; |
| top_time = call_time; |
| } |
| } |
| } |
| |
| if (top_dog && top_dog->ncalls != 0 && top_time > 0.0) |
| { |
| top_time /= hz; |
| |
| for (log_scale = 0; log_scale < ARRAY_SIZE (SItab); log_scale ++) |
| { |
| double scaled_value = SItab[log_scale].scale * top_time; |
| |
| if (scaled_value >= 1.0 && scaled_value < 1000.0) |
| break; |
| } |
| } |
| } |
| |
| /* For now, the dimension is always seconds. In the future, we |
| may also want to support other (pseudo-)dimensions (such as |
| I-cache misses etc.). */ |
| print_header (SItab[log_scale].prefix); |
| |
| for (sym_index = 0; sym_index < symtab.len; ++sym_index) |
| { |
| addr = time_sorted_syms[sym_index]->addr; |
| |
| /* Print symbol if its in INCL_FLAT table or that table |
| is empty and the symbol is not in EXCL_FLAT. */ |
| if (sym_lookup (&syms[INCL_FLAT], addr) |
| || (syms[INCL_FLAT].len == 0 |
| && !sym_lookup (&syms[EXCL_FLAT], addr))) |
| print_line (time_sorted_syms[sym_index], SItab[log_scale].scale); |
| } |
| |
| free (time_sorted_syms); |
| |
| if (print_descriptions && !bsd_style_output) |
| flat_blurb (stdout); |
| } |
| |
| int |
| hist_check_address (unsigned address) |
| { |
| unsigned i; |
| |
| for (i = 0; i < num_histograms; ++i) |
| if (histograms[i].lowpc <= address && address < histograms[i].highpc) |
| return 1; |
| |
| return 0; |
| } |
| |
| #if ! defined(min) |
| #define min(a,b) (((a)<(b)) ? (a) : (b)) |
| #endif |
| #if ! defined(max) |
| #define max(a,b) (((a)>(b)) ? (a) : (b)) |
| #endif |
| |
| void |
| hist_clip_symbol_address (bfd_vma *p_lowpc, bfd_vma *p_highpc) |
| { |
| unsigned i; |
| int found = 0; |
| |
| if (num_histograms == 0) |
| { |
| *p_highpc = *p_lowpc; |
| return; |
| } |
| |
| for (i = 0; i < num_histograms; ++i) |
| { |
| bfd_vma common_low, common_high; |
| common_low = max (histograms[i].lowpc, *p_lowpc); |
| common_high = min (histograms[i].highpc, *p_highpc); |
| |
| if (common_low < common_high) |
| { |
| if (found) |
| { |
| fprintf (stderr, |
| _("%s: found a symbol that covers " |
| "several histogram records"), |
| whoami); |
| done (1); |
| } |
| |
| found = 1; |
| *p_lowpc = common_low; |
| *p_highpc = common_high; |
| } |
| } |
| |
| if (!found) |
| *p_highpc = *p_lowpc; |
| } |
| |
| /* Find and return exising histogram record having the same lowpc and |
| highpc as passed via the parameters. Return NULL if nothing is found. |
| The return value is valid until any new histogram is read. */ |
| static histogram * |
| find_histogram (bfd_vma lowpc, bfd_vma highpc) |
| { |
| unsigned i; |
| for (i = 0; i < num_histograms; ++i) |
| { |
| if (histograms[i].lowpc == lowpc && histograms[i].highpc == highpc) |
| return &histograms[i]; |
| } |
| return 0; |
| } |
| |
| /* Given a PC, return histogram record which address range include this PC. |
| Return NULL if there's no such record. */ |
| static histogram * |
| find_histogram_for_pc (bfd_vma pc) |
| { |
| unsigned i; |
| for (i = 0; i < num_histograms; ++i) |
| { |
| if (histograms[i].lowpc <= pc && pc < histograms[i].highpc) |
| return &histograms[i]; |
| } |
| return 0; |
| } |