| /* ppc.h -- Header file for PowerPC opcode table |
| Copyright (C) 1994-2021 Free Software Foundation, Inc. |
| Written by Ian Lance Taylor, Cygnus Support |
| |
| This file is part of GDB, GAS, and the GNU binutils. |
| |
| GDB, GAS, and the GNU binutils are free software; you can redistribute |
| them and/or modify them under the terms of the GNU General Public |
| License as published by the Free Software Foundation; either version 3, |
| or (at your option) any later version. |
| |
| GDB, GAS, and the GNU binutils are distributed in the hope that they |
| will be useful, but WITHOUT ANY WARRANTY; without even the implied |
| warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See |
| the GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this file; see the file COPYING3. If not, write to the Free |
| Software Foundation, 51 Franklin Street - Fifth Floor, Boston, |
| MA 02110-1301, USA. */ |
| |
| #ifndef PPC_H |
| #define PPC_H |
| |
| #include <stdint.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| typedef uint64_t ppc_cpu_t; |
| |
| /* The opcode table is an array of struct powerpc_opcode. */ |
| |
| struct powerpc_opcode |
| { |
| /* The opcode name. */ |
| const char *name; |
| |
| /* The opcode itself. Those bits which will be filled in with |
| operands are zeroes. */ |
| uint64_t opcode; |
| |
| /* The opcode mask. This is used by the disassembler. This is a |
| mask containing ones indicating those bits which must match the |
| opcode field, and zeroes indicating those bits which need not |
| match (and are presumably filled in by operands). */ |
| uint64_t mask; |
| |
| /* One bit flags for the opcode. These are used to indicate which |
| specific processors support the instructions. The defined values |
| are listed below. */ |
| ppc_cpu_t flags; |
| |
| /* One bit flags for the opcode. These are used to indicate which |
| specific processors no longer support the instructions. The defined |
| values are listed below. */ |
| ppc_cpu_t deprecated; |
| |
| /* An array of operand codes. Each code is an index into the |
| operand table. They appear in the order which the operands must |
| appear in assembly code, and are terminated by a zero. */ |
| unsigned char operands[8]; |
| }; |
| |
| /* The table itself is sorted by major opcode number, and is otherwise |
| in the order in which the disassembler should consider |
| instructions. */ |
| extern const struct powerpc_opcode powerpc_opcodes[]; |
| extern const unsigned int powerpc_num_opcodes; |
| extern const struct powerpc_opcode prefix_opcodes[]; |
| extern const unsigned int prefix_num_opcodes; |
| extern const struct powerpc_opcode vle_opcodes[]; |
| extern const unsigned int vle_num_opcodes; |
| extern const struct powerpc_opcode spe2_opcodes[]; |
| extern const unsigned int spe2_num_opcodes; |
| |
| /* Values defined for the flags field of a struct powerpc_opcode. */ |
| |
| /* Opcode is defined for the PowerPC architecture. */ |
| #define PPC_OPCODE_PPC 0x1ull |
| |
| /* Opcode is defined for the POWER (RS/6000) architecture. */ |
| #define PPC_OPCODE_POWER 0x2ull |
| |
| /* Opcode is defined for the POWER2 (Rios 2) architecture. */ |
| #define PPC_OPCODE_POWER2 0x4ull |
| |
| /* Opcode is only defined on 64 bit architectures. */ |
| #define PPC_OPCODE_64 0x8ull |
| |
| /* Opcode is supported by the Motorola PowerPC 601 processor. The 601 |
| is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions, |
| but it also supports many additional POWER instructions. */ |
| #define PPC_OPCODE_601 0x10ull |
| |
| /* Opcode is supported in both the Power and PowerPC architectures |
| (ie, compiler's -mcpu=common or assembler's -mcom). More than just |
| the intersection of PPC_OPCODE_PPC with the union of PPC_OPCODE_POWER |
| and PPC_OPCODE_POWER2 because many instructions changed mnemonics |
| between POWER and POWERPC. */ |
| #define PPC_OPCODE_COMMON 0x20ull |
| |
| /* Opcode is supported for any Power or PowerPC platform (this is |
| for the assembler's -many option, and it eliminates duplicates). */ |
| #define PPC_OPCODE_ANY 0x40ull |
| |
| /* Opcode is supported as part of the 64-bit bridge. */ |
| #define PPC_OPCODE_64_BRIDGE 0x80ull |
| |
| /* Opcode is supported by Altivec Vector Unit */ |
| #define PPC_OPCODE_ALTIVEC 0x100ull |
| |
| /* Opcode is supported by PowerPC 403 processor. */ |
| #define PPC_OPCODE_403 0x200ull |
| |
| /* Opcode is supported by PowerPC BookE processor. */ |
| #define PPC_OPCODE_BOOKE 0x400ull |
| |
| /* Opcode is only supported by Power4 architecture. */ |
| #define PPC_OPCODE_POWER4 0x800ull |
| |
| /* Opcode is only supported by e500x2 Core. |
| This bit, PPC_OPCODE_EFS, PPC_OPCODE_VLE, and all those with APU in |
| their comment mark opcodes so that when those instructions are used |
| an APUinfo entry can be generated. */ |
| #define PPC_OPCODE_SPE 0x1000ull |
| |
| /* Opcode is supported by Integer select APU. */ |
| #define PPC_OPCODE_ISEL 0x2000ull |
| |
| /* Opcode is an e500 SPE floating point instruction. */ |
| #define PPC_OPCODE_EFS 0x4000ull |
| |
| /* Opcode is supported by branch locking APU. */ |
| #define PPC_OPCODE_BRLOCK 0x8000ull |
| |
| /* Opcode is supported by performance monitor APU. */ |
| #define PPC_OPCODE_PMR 0x10000ull |
| |
| /* Opcode is supported by cache locking APU. */ |
| #define PPC_OPCODE_CACHELCK 0x20000ull |
| |
| /* Opcode is supported by machine check APU. */ |
| #define PPC_OPCODE_RFMCI 0x40000ull |
| |
| /* Opcode is supported by PowerPC 440 processor. */ |
| #define PPC_OPCODE_440 0x80000ull |
| |
| /* Opcode is only supported by Power5 architecture. */ |
| #define PPC_OPCODE_POWER5 0x100000ull |
| |
| /* Opcode is supported by PowerPC e300 family. */ |
| #define PPC_OPCODE_E300 0x200000ull |
| |
| /* Opcode is only supported by Power6 architecture. */ |
| #define PPC_OPCODE_POWER6 0x400000ull |
| |
| /* Opcode is only supported by PowerPC Cell family. */ |
| #define PPC_OPCODE_CELL 0x800000ull |
| |
| /* Opcode is supported by CPUs with paired singles support. */ |
| #define PPC_OPCODE_PPCPS 0x1000000ull |
| |
| /* Opcode is supported by Power E500MC */ |
| #define PPC_OPCODE_E500MC 0x2000000ull |
| |
| /* Opcode is supported by PowerPC 405 processor. */ |
| #define PPC_OPCODE_405 0x4000000ull |
| |
| /* Opcode is supported by Vector-Scalar (VSX) Unit */ |
| #define PPC_OPCODE_VSX 0x8000000ull |
| |
| /* Opcode is only supported by Power7 architecture. */ |
| #define PPC_OPCODE_POWER7 0x10000000ull |
| |
| /* Opcode is supported by A2. */ |
| #define PPC_OPCODE_A2 0x20000000ull |
| |
| /* Opcode is supported by PowerPC 476 processor. */ |
| #define PPC_OPCODE_476 0x40000000ull |
| |
| /* Opcode is supported by AppliedMicro Titan core */ |
| #define PPC_OPCODE_TITAN 0x80000000ull |
| |
| /* Opcode which is supported by the e500 family */ |
| #define PPC_OPCODE_E500 0x100000000ull |
| |
| /* Opcode is supported by Power E6500 */ |
| #define PPC_OPCODE_E6500 0x200000000ull |
| |
| /* Opcode is supported by Thread management APU */ |
| #define PPC_OPCODE_TMR 0x400000000ull |
| |
| /* Opcode which is supported by the VLE extension. */ |
| #define PPC_OPCODE_VLE 0x800000000ull |
| |
| /* Opcode is only supported by Power8 architecture. */ |
| #define PPC_OPCODE_POWER8 0x1000000000ull |
| |
| /* Opcode is supported by ppc750cl/Gekko/Broadway. */ |
| #define PPC_OPCODE_750 0x2000000000ull |
| |
| /* Opcode is supported by ppc7450. */ |
| #define PPC_OPCODE_7450 0x4000000000ull |
| |
| /* Opcode is supported by ppc821/850/860. */ |
| #define PPC_OPCODE_860 0x8000000000ull |
| |
| /* Opcode is only supported by Power9 architecture. */ |
| #define PPC_OPCODE_POWER9 0x10000000000ull |
| |
| /* Opcode is supported by e200z4. */ |
| #define PPC_OPCODE_E200Z4 0x20000000000ull |
| |
| /* Disassemble to instructions matching later in the opcode table |
| with fewer "mask" bits set rather than the earlist match. Fewer |
| "mask" bits set imply a more general form of the opcode, in fact |
| the underlying machine instruction. */ |
| #define PPC_OPCODE_RAW 0x40000000000ull |
| |
| /* Opcode is supported by PowerPC LSP */ |
| #define PPC_OPCODE_LSP 0x80000000000ull |
| |
| /* Opcode is only supported by Freescale SPE2 APU. */ |
| #define PPC_OPCODE_SPE2 0x100000000000ull |
| |
| /* Opcode is supported by EFS2. */ |
| #define PPC_OPCODE_EFS2 0x200000000000ull |
| |
| /* Opcode is only supported by power10 architecture. */ |
| #define PPC_OPCODE_POWER10 0x400000000000ull |
| |
| /* A macro to extract the major opcode from an instruction. */ |
| #define PPC_OP(i) (((i) >> 26) & 0x3f) |
| |
| /* A macro to determine if the instruction is a 2-byte VLE insn. */ |
| #define PPC_OP_SE_VLE(m) ((m) <= 0xffff) |
| |
| /* A macro to extract the major opcode from a VLE instruction. */ |
| #define VLE_OP(i,m) (((i) >> ((m) <= 0xffff ? 10 : 26)) & 0x3f) |
| |
| /* A macro to convert a VLE opcode to a VLE opcode segment. */ |
| #define VLE_OP_TO_SEG(i) ((i) >> 1) |
| |
| /* A macro to extract the extended opcode from a SPE2 instruction. */ |
| #define SPE2_XOP(i) ((i) & 0x7ff) |
| |
| /* A macro to convert a SPE2 extended opcode to a SPE2 xopcode segment. */ |
| #define SPE2_XOP_TO_SEG(i) ((i) >> 7) |
| |
| /* A macro to extract the prefix word from an 8-byte PREFIX instruction. */ |
| #define PPC_GET_PREFIX(i) (((i) >> 32) & ((1LL << 32) - 1)) |
| |
| /* A macro to extract the suffix word from an 8-byte PREFIX instruction. */ |
| #define PPC_GET_SUFFIX(i) ((i) & ((1LL << 32) - 1)) |
| |
| /* A macro to determine whether insn I is an 8-byte prefix instruction. */ |
| #define PPC_PREFIX_P(i) (PPC_OP (PPC_GET_PREFIX (i)) == 0x1) |
| |
| /* A macro used to hash 8-byte PREFIX instructions. */ |
| #define PPC_PREFIX_SEG(i) (PPC_OP (i) >> 1) |
| |
| |
| /* The operands table is an array of struct powerpc_operand. */ |
| |
| struct powerpc_operand |
| { |
| /* A bitmask of bits in the operand. */ |
| uint64_t bitm; |
| |
| /* The shift operation to be applied to the operand. No shift |
| is made if this is zero. For positive values, the operand |
| is shifted left by SHIFT. For negative values, the operand |
| is shifted right by -SHIFT. Use PPC_OPSHIFT_INV to indicate |
| that BITM and SHIFT cannot be used to determine where the |
| operand goes in the insn. */ |
| int shift; |
| |
| /* Insertion function. This is used by the assembler. To insert an |
| operand value into an instruction, check this field. |
| |
| If it is NULL, execute |
| if (o->shift >= 0) |
| i |= (op & o->bitm) << o->shift; |
| else |
| i |= (op & o->bitm) >> -o->shift; |
| (i is the instruction which we are filling in, o is a pointer to |
| this structure, and op is the operand value). |
| |
| If this field is not NULL, then simply call it with the |
| instruction and the operand value. It will return the new value |
| of the instruction. If the operand value is illegal, *ERRMSG |
| will be set to a warning string (the operand will be inserted in |
| any case). If the operand value is legal, *ERRMSG will be |
| unchanged (most operands can accept any value). */ |
| uint64_t (*insert) |
| (uint64_t instruction, int64_t op, ppc_cpu_t dialect, const char **errmsg); |
| |
| /* Extraction function. This is used by the disassembler. To |
| extract this operand type from an instruction, check this field. |
| |
| If it is NULL, compute |
| if (o->shift >= 0) |
| op = (i >> o->shift) & o->bitm; |
| else |
| op = (i << -o->shift) & o->bitm; |
| if ((o->flags & PPC_OPERAND_SIGNED) != 0) |
| sign_extend (op); |
| (i is the instruction, o is a pointer to this structure, and op |
| is the result). |
| |
| If this field is not NULL, then simply call it with the |
| instruction value. It will return the value of the operand. |
| *INVALID will be set to one by the extraction function if this |
| operand type can not be extracted from this operand (i.e., the |
| instruction does not match). If the operand is valid, *INVALID |
| will not be changed. *INVALID will always be non-negative when |
| used to extract a field from an instruction. |
| |
| The extraction function is also called by both the assembler and |
| disassembler if an operand is optional, in which case the |
| function should return the default value of the operand. |
| *INVALID is negative in this case, and is the negative count of |
| omitted optional operands up to and including this operand. */ |
| int64_t (*extract) (uint64_t instruction, ppc_cpu_t dialect, int *invalid); |
| |
| /* One bit syntax flags. */ |
| unsigned long flags; |
| }; |
| |
| /* Elements in the table are retrieved by indexing with values from |
| the operands field of the powerpc_opcodes table. */ |
| |
| extern const struct powerpc_operand powerpc_operands[]; |
| extern const unsigned int num_powerpc_operands; |
| |
| /* Use with the shift field of a struct powerpc_operand to indicate |
| that BITM and SHIFT cannot be used to determine where the operand |
| goes in the insn. */ |
| #define PPC_OPSHIFT_INV (-1U << 31) |
| |
| /* Values defined for the flags field of a struct powerpc_operand. |
| Keep the register bits low: They need to fit in an unsigned short. */ |
| |
| /* This operand names a register. The disassembler uses this to print |
| register names with a leading 'r'. */ |
| #define PPC_OPERAND_GPR (0x1) |
| |
| /* Like PPC_OPERAND_GPR, but don't print a leading 'r' for r0. */ |
| #define PPC_OPERAND_GPR_0 (0x2) |
| |
| /* This operand names a floating point register. The disassembler |
| prints these with a leading 'f'. */ |
| #define PPC_OPERAND_FPR (0x4) |
| |
| /* This operand names a vector unit register. The disassembler |
| prints these with a leading 'v'. */ |
| #define PPC_OPERAND_VR (0x8) |
| |
| /* This operand names a vector-scalar unit register. The disassembler |
| prints these with a leading 'vs'. */ |
| #define PPC_OPERAND_VSR (0x10) |
| |
| /* This operand names a VSX accumulator. */ |
| #define PPC_OPERAND_ACC (0x20) |
| |
| /* This operand may use the symbolic names for the CR fields (even |
| without -mregnames), which are |
| lt 0 gt 1 eq 2 so 3 un 3 |
| cr0 0 cr1 1 cr2 2 cr3 3 |
| cr4 4 cr5 5 cr6 6 cr7 7 |
| These may be combined arithmetically, as in cr2*4+gt. These are |
| only supported on the PowerPC, not the POWER. */ |
| #define PPC_OPERAND_CR_BIT (0x40) |
| |
| /* This is a CR FIELD that does not use symbolic names (unless |
| -mregnames is in effect). If both PPC_OPERAND_CR_BIT and |
| PPC_OPERAND_CR_REG are set then treat the field as per |
| PPC_OPERAND_CR_BIT for assembly, but as if neither of these |
| bits are set for disassembly. */ |
| #define PPC_OPERAND_CR_REG (0x80) |
| |
| /* This operand names a special purpose register. */ |
| #define PPC_OPERAND_SPR (0x100) |
| |
| /* This operand names a paired-single graphics quantization register. */ |
| #define PPC_OPERAND_GQR (0x200) |
| |
| /* This operand is a relative branch displacement. The disassembler |
| prints these symbolically if possible. */ |
| #define PPC_OPERAND_RELATIVE (0x400) |
| |
| /* This operand is an absolute branch address. The disassembler |
| prints these symbolically if possible. */ |
| #define PPC_OPERAND_ABSOLUTE (0x800) |
| |
| /* This operand takes signed values. */ |
| #define PPC_OPERAND_SIGNED (0x1000) |
| |
| /* This operand takes signed values, but also accepts a full positive |
| range of values when running in 32 bit mode. That is, if bits is |
| 16, it takes any value from -0x8000 to 0xffff. In 64 bit mode, |
| this flag is ignored. */ |
| #define PPC_OPERAND_SIGNOPT (0x2000) |
| |
| /* The next operand should be wrapped in parentheses rather than |
| separated from this one by a comma. This is used for the load and |
| store instructions which want their operands to look like |
| reg,displacement(reg) |
| */ |
| #define PPC_OPERAND_PARENS (0x4000) |
| |
| /* This operand is for the DS field in a DS form instruction. */ |
| #define PPC_OPERAND_DS (0x8000) |
| |
| /* This operand is for the DQ field in a DQ form instruction. */ |
| #define PPC_OPERAND_DQ (0x10000) |
| |
| /* This operand should be regarded as a negative number for the |
| purposes of overflow checking (i.e., the normal most negative |
| number is disallowed and one more than the normal most positive |
| number is allowed). This flag will only be set for a signed |
| operand. */ |
| #define PPC_OPERAND_NEGATIVE (0x20000) |
| |
| /* Valid range of operand is 0..n rather than 0..n-1. */ |
| #define PPC_OPERAND_PLUS1 (0x40000) |
| |
| /* This operand is optional, and is zero if omitted. This is used for |
| example, in the optional BF field in the comparison instructions. The |
| assembler must count the number of operands remaining on the line, |
| and the number of operands remaining for the opcode, and decide |
| whether this operand is present or not. The disassembler should |
| print this operand out only if it is not zero. */ |
| #define PPC_OPERAND_OPTIONAL (0x80000) |
| |
| /* This flag is only used with PPC_OPERAND_OPTIONAL. If this operand |
| is omitted, then for the next operand use this operand value plus |
| 1, ignoring the next operand field for the opcode. This wretched |
| hack is needed because the Power rotate instructions can take |
| either 4 or 5 operands. The disassembler should print this operand |
| out regardless of the PPC_OPERAND_OPTIONAL field. */ |
| #define PPC_OPERAND_NEXT (0x100000) |
| |
| /* This flag is only used with PPC_OPERAND_OPTIONAL. The operand is |
| only optional when generating 32-bit code. */ |
| #define PPC_OPERAND_OPTIONAL32 (0x400000) |
| |
| /* Xilinx APU and FSL related operands */ |
| #define PPC_OPERAND_FSL (0x800000) |
| #define PPC_OPERAND_FCR (0x1000000) |
| #define PPC_OPERAND_UDI (0x2000000) |
| |
| /* The POWER and PowerPC assemblers use a few macros. We keep them |
| with the operands table for simplicity. The macro table is an |
| array of struct powerpc_macro. */ |
| |
| struct powerpc_macro |
| { |
| /* The macro name. */ |
| const char *name; |
| |
| /* The number of operands the macro takes. */ |
| unsigned int operands; |
| |
| /* One bit flags for the opcode. These are used to indicate which |
| specific processors support the instructions. The values are the |
| same as those for the struct powerpc_opcode flags field. */ |
| ppc_cpu_t flags; |
| |
| /* A format string to turn the macro into a normal instruction. |
| Each %N in the string is replaced with operand number N (zero |
| based). */ |
| const char *format; |
| }; |
| |
| extern const struct powerpc_macro powerpc_macros[]; |
| extern const int powerpc_num_macros; |
| |
| extern ppc_cpu_t ppc_parse_cpu (ppc_cpu_t, ppc_cpu_t *, const char *); |
| |
| static inline int64_t |
| ppc_optional_operand_value (const struct powerpc_operand *operand, |
| uint64_t insn, |
| ppc_cpu_t dialect, |
| int num_optional) |
| { |
| if (operand->extract) |
| return (*operand->extract) (insn, dialect, &num_optional); |
| return 0; |
| } |
| |
| /* PowerPC VLE insns. */ |
| #define E_OPCODE_MASK 0xfc00f800 |
| |
| /* Form I16L, uses 16A relocs. */ |
| #define E_OR2I_INSN 0x7000C000 |
| #define E_AND2I_DOT_INSN 0x7000C800 |
| #define E_OR2IS_INSN 0x7000D000 |
| #define E_LIS_INSN 0x7000E000 |
| #define E_AND2IS_DOT_INSN 0x7000E800 |
| |
| /* Form I16A, uses 16D relocs. */ |
| #define E_ADD2I_DOT_INSN 0x70008800 |
| #define E_ADD2IS_INSN 0x70009000 |
| #define E_CMP16I_INSN 0x70009800 |
| #define E_MULL2I_INSN 0x7000A000 |
| #define E_CMPL16I_INSN 0x7000A800 |
| #define E_CMPH16I_INSN 0x7000B000 |
| #define E_CMPHL16I_INSN 0x7000B800 |
| |
| #define E_LI_INSN 0x70000000 |
| #define E_LI_MASK 0xfc008000 |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* PPC_H */ |
