| /* Simulator for TI MSP430 and MSP430X |
| |
| Copyright (C) 2013-2021 Free Software Foundation, Inc. |
| Contributed by Red Hat. |
| Based on sim/bfin/bfin-sim.c which was contributed by Analog Devices, Inc. |
| |
| This file is part of simulators. |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 3 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| |
| /* This must come before any other includes. */ |
| #include "defs.h" |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <inttypes.h> |
| #include <unistd.h> |
| #include <assert.h> |
| #include "opcode/msp430-decode.h" |
| #include "sim-main.h" |
| #include "sim-signal.h" |
| #include "sim-syscall.h" |
| #include "targ-vals.h" |
| |
| static sim_cia |
| msp430_pc_fetch (SIM_CPU *cpu) |
| { |
| return cpu->state.regs[0]; |
| } |
| |
| static void |
| msp430_pc_store (SIM_CPU *cpu, sim_cia newpc) |
| { |
| cpu->state.regs[0] = newpc; |
| } |
| |
| static int |
| msp430_reg_fetch (SIM_CPU *cpu, int regno, unsigned char *buf, int len) |
| { |
| if (0 <= regno && regno < 16) |
| { |
| if (len == 2) |
| { |
| int val = cpu->state.regs[regno]; |
| buf[0] = val & 0xff; |
| buf[1] = (val >> 8) & 0xff; |
| return 0; |
| } |
| else if (len == 4) |
| { |
| int val = cpu->state.regs[regno]; |
| buf[0] = val & 0xff; |
| buf[1] = (val >> 8) & 0xff; |
| buf[2] = (val >> 16) & 0x0f; /* Registers are only 20 bits wide. */ |
| buf[3] = 0; |
| return 0; |
| } |
| else |
| return -1; |
| } |
| else |
| return -1; |
| } |
| |
| static int |
| msp430_reg_store (SIM_CPU *cpu, int regno, unsigned char *buf, int len) |
| { |
| if (0 <= regno && regno < 16) |
| { |
| if (len == 2) |
| { |
| cpu->state.regs[regno] = (buf[1] << 8) | buf[0]; |
| return len; |
| } |
| |
| if (len == 4) |
| { |
| cpu->state.regs[regno] = ((buf[2] << 16) & 0xf0000) |
| | (buf[1] << 8) | buf[0]; |
| return len; |
| } |
| } |
| |
| return -1; |
| } |
| |
| static inline void |
| msp430_initialize_cpu (SIM_DESC sd, SIM_CPU *cpu) |
| { |
| memset (&cpu->state, 0, sizeof (cpu->state)); |
| } |
| |
| SIM_DESC |
| sim_open (SIM_OPEN_KIND kind, |
| struct host_callback_struct *callback, |
| struct bfd *abfd, |
| char * const *argv) |
| { |
| SIM_DESC sd = sim_state_alloc (kind, callback); |
| char c; |
| |
| /* Initialise the simulator. */ |
| |
| /* Set default options before parsing user options. */ |
| current_target_byte_order = BFD_ENDIAN_LITTLE; |
| |
| if (sim_cpu_alloc_all (sd, 1) != SIM_RC_OK) |
| { |
| sim_state_free (sd); |
| return 0; |
| } |
| |
| if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK) |
| { |
| sim_state_free (sd); |
| return 0; |
| } |
| |
| if (sim_parse_args (sd, argv) != SIM_RC_OK) |
| { |
| sim_state_free (sd); |
| return 0; |
| } |
| |
| CPU_PC_FETCH (MSP430_CPU (sd)) = msp430_pc_fetch; |
| CPU_PC_STORE (MSP430_CPU (sd)) = msp430_pc_store; |
| CPU_REG_FETCH (MSP430_CPU (sd)) = msp430_reg_fetch; |
| CPU_REG_STORE (MSP430_CPU (sd)) = msp430_reg_store; |
| |
| /* Allocate memory if none specified by user. |
| Note - these values match the memory regions in the libgloss/msp430/msp430[xl]-sim.ld scripts. */ |
| if (sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, &c, 0x2, 1) == 0) |
| sim_do_commandf (sd, "memory-region 0,0x20"); /* Needed by the GDB testsuite. */ |
| if (sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, &c, 0x500, 1) == 0) |
| sim_do_commandf (sd, "memory-region 0x500,0xfac0"); /* RAM and/or ROM */ |
| if (sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, &c, 0xfffe, 1) == 0) |
| sim_do_commandf (sd, "memory-region 0xffc0,0x40"); /* VECTORS. */ |
| if (sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, &c, 0x10000, 1) == 0) |
| sim_do_commandf (sd, "memory-region 0x10000,0x80000"); /* HIGH FLASH RAM. */ |
| if (sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, &c, 0x90000, 1) == 0) |
| sim_do_commandf (sd, "memory-region 0x90000,0x70000"); /* HIGH ROM. */ |
| |
| /* Check for/establish the a reference program image. */ |
| if (sim_analyze_program (sd, |
| (STATE_PROG_ARGV (sd) != NULL |
| ? *STATE_PROG_ARGV (sd) |
| : NULL), abfd) != SIM_RC_OK) |
| { |
| sim_state_free (sd); |
| return 0; |
| } |
| |
| /* Establish any remaining configuration options. */ |
| if (sim_config (sd) != SIM_RC_OK) |
| { |
| sim_state_free (sd); |
| return 0; |
| } |
| |
| if (sim_post_argv_init (sd) != SIM_RC_OK) |
| { |
| sim_state_free (sd); |
| return 0; |
| } |
| |
| /* CPU specific initialization. */ |
| assert (MAX_NR_PROCESSORS == 1); |
| msp430_initialize_cpu (sd, MSP430_CPU (sd)); |
| |
| MSP430_CPU (sd)->state.cio_breakpoint = trace_sym_value (sd, "C$$IO$$"); |
| MSP430_CPU (sd)->state.cio_buffer = trace_sym_value (sd, "__CIOBUF__"); |
| if (MSP430_CPU (sd)->state.cio_buffer == -1) |
| MSP430_CPU (sd)->state.cio_buffer = trace_sym_value (sd, "_CIOBUF_"); |
| |
| return sd; |
| } |
| |
| SIM_RC |
| sim_create_inferior (SIM_DESC sd, |
| struct bfd *abfd, |
| char * const *argv, |
| char * const *env) |
| { |
| unsigned char resetv[2]; |
| int c; |
| int new_pc; |
| |
| /* Set the PC to the default reset vector if available. */ |
| c = sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, resetv, 0xfffe, 2); |
| new_pc = resetv[0] + 256 * resetv[1]; |
| |
| /* If the reset vector isn't initialized, then use the ELF entry. */ |
| if (abfd != NULL && !new_pc) |
| new_pc = bfd_get_start_address (abfd); |
| |
| sim_pc_set (MSP430_CPU (sd), new_pc); |
| msp430_pc_store (MSP430_CPU (sd), new_pc); |
| |
| return SIM_RC_OK; |
| } |
| |
| typedef struct |
| { |
| SIM_DESC sd; |
| int gb_addr; |
| } Get_Byte_Local_Data; |
| |
| static int |
| msp430_getbyte (void *vld) |
| { |
| Get_Byte_Local_Data *ld = (Get_Byte_Local_Data *)vld; |
| char buf[1]; |
| SIM_DESC sd = ld->sd; |
| |
| sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, buf, ld->gb_addr, 1); |
| ld->gb_addr ++; |
| return buf[0]; |
| } |
| |
| #define REG(N) MSP430_CPU (sd)->state.regs[(N)] |
| #define PC REG(MSR_PC) |
| #define SP REG(MSR_SP) |
| #define SR REG(MSR_SR) |
| |
| static const char * |
| register_names[] = |
| { |
| "PC", "SP", "SR", "CG", "R4", "R5", "R6", "R7", "R8", |
| "R9", "R10", "R11", "R12", "R13", "R14", "R15" |
| }; |
| |
| static void |
| trace_reg_put (SIM_DESC sd, int n, unsigned int v) |
| { |
| TRACE_REGISTER (MSP430_CPU (sd), "PUT: %#x -> %s", v, register_names[n]); |
| REG (n) = v; |
| } |
| |
| static unsigned int |
| trace_reg_get (SIM_DESC sd, int n) |
| { |
| TRACE_REGISTER (MSP430_CPU (sd), "GET: %s -> %#x", register_names[n], REG (n)); |
| return REG (n); |
| } |
| |
| #define REG_PUT(N,V) trace_reg_put (sd, N, V) |
| #define REG_GET(N) trace_reg_get (sd, N) |
| |
| /* Hardware multiply (and accumulate) support. */ |
| |
| static unsigned int |
| zero_ext (unsigned int v, unsigned int bits) |
| { |
| v &= ((1 << bits) - 1); |
| return v; |
| } |
| |
| static signed long long |
| sign_ext (signed long long v, unsigned int bits) |
| { |
| signed long long sb = 1LL << (bits-1); /* Sign bit. */ |
| signed long long mb = (1LL << (bits-1)) - 1LL; /* Mantissa bits. */ |
| |
| if (v & sb) |
| v = v | ~mb; |
| else |
| v = v & mb; |
| return v; |
| } |
| |
| static int |
| get_op (SIM_DESC sd, MSP430_Opcode_Decoded *opc, int n) |
| { |
| MSP430_Opcode_Operand *op = opc->op + n; |
| int rv = 0; |
| int addr; |
| unsigned char buf[4]; |
| int incval = 0; |
| |
| switch (op->type) |
| { |
| case MSP430_Operand_Immediate: |
| rv = op->addend; |
| break; |
| case MSP430_Operand_Register: |
| rv = REG_GET (op->reg); |
| break; |
| case MSP430_Operand_Indirect: |
| case MSP430_Operand_Indirect_Postinc: |
| addr = op->addend; |
| if (op->reg != MSR_None) |
| { |
| int reg = REG_GET (op->reg); |
| int sign = opc->ofs_430x ? 20 : 16; |
| |
| /* Index values are signed. */ |
| if (addr & (1 << (sign - 1))) |
| addr |= -(1 << sign); |
| |
| addr += reg; |
| |
| /* For MSP430 instructions the sum is limited to 16 bits if the |
| address in the index register is less than 64k even if we are |
| running on an MSP430X CPU. This is for MSP430 compatibility. */ |
| if (reg < 0x10000 && ! opc->ofs_430x) |
| { |
| if (addr >= 0x10000) |
| fprintf (stderr, " XXX WRAPPING ADDRESS %x on read\n", addr); |
| |
| addr &= 0xffff; |
| } |
| } |
| addr &= 0xfffff; |
| switch (opc->size) |
| { |
| case 8: |
| sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, buf, addr, 1); |
| rv = buf[0]; |
| break; |
| case 16: |
| sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, buf, addr, 2); |
| rv = buf[0] | (buf[1] << 8); |
| break; |
| case 20: |
| case 32: |
| sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, buf, addr, 4); |
| rv = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24); |
| break; |
| default: |
| assert (! opc->size); |
| break; |
| } |
| #if 0 |
| /* Hack - MSP430X5438 serial port status register. */ |
| if (addr == 0x5dd) |
| rv = 2; |
| #endif |
| if ((addr >= 0x130 && addr <= 0x15B) |
| || (addr >= 0x4C0 && addr <= 0x4EB)) |
| { |
| switch (addr) |
| { |
| case 0x4CA: |
| case 0x13A: |
| switch (HWMULT (sd, hwmult_type)) |
| { |
| case UNSIGN_MAC_32: |
| case UNSIGN_32: |
| rv = zero_ext (HWMULT (sd, hwmult_result), 16); |
| break; |
| case SIGN_MAC_32: |
| case SIGN_32: |
| rv = sign_ext (HWMULT (sd, hwmult_signed_result), 16); |
| break; |
| } |
| break; |
| |
| case 0x4CC: |
| case 0x13C: |
| switch (HWMULT (sd, hwmult_type)) |
| { |
| case UNSIGN_MAC_32: |
| case UNSIGN_32: |
| rv = zero_ext (HWMULT (sd, hwmult_result) >> 16, 16); |
| break; |
| |
| case SIGN_MAC_32: |
| case SIGN_32: |
| rv = sign_ext (HWMULT (sd, hwmult_signed_result) >> 16, 16); |
| break; |
| } |
| break; |
| |
| case 0x4CE: |
| case 0x13E: |
| switch (HWMULT (sd, hwmult_type)) |
| { |
| case UNSIGN_32: |
| rv = 0; |
| break; |
| case SIGN_32: |
| rv = HWMULT (sd, hwmult_signed_result) < 0 ? -1 : 0; |
| break; |
| case UNSIGN_MAC_32: |
| rv = 0; /* FIXME: Should be carry of last accumulate. */ |
| break; |
| case SIGN_MAC_32: |
| rv = HWMULT (sd, hwmult_signed_accumulator) < 0 ? -1 : 0; |
| break; |
| } |
| break; |
| |
| case 0x4E4: |
| case 0x154: |
| rv = zero_ext (HWMULT (sd, hw32mult_result), 16); |
| break; |
| |
| case 0x4E6: |
| case 0x156: |
| rv = zero_ext (HWMULT (sd, hw32mult_result) >> 16, 16); |
| break; |
| |
| case 0x4E8: |
| case 0x158: |
| rv = zero_ext (HWMULT (sd, hw32mult_result) >> 32, 16); |
| break; |
| |
| case 0x4EA: |
| case 0x15A: |
| switch (HWMULT (sd, hw32mult_type)) |
| { |
| case UNSIGN_64: rv = zero_ext (HWMULT (sd, hw32mult_result) >> 48, 16); break; |
| case SIGN_64: rv = sign_ext (HWMULT (sd, hw32mult_result) >> 48, 16); break; |
| } |
| break; |
| |
| default: |
| fprintf (stderr, "unimplemented HW MULT read from %x!\n", addr); |
| break; |
| } |
| } |
| |
| TRACE_MEMORY (MSP430_CPU (sd), "GET: [%#x].%d -> %#x", addr, opc->size, |
| rv); |
| break; |
| |
| default: |
| fprintf (stderr, "invalid operand %d type %d\n", n, op->type); |
| abort (); |
| } |
| |
| switch (opc->size) |
| { |
| case 8: |
| rv &= 0xff; |
| incval = 1; |
| break; |
| case 16: |
| rv &= 0xffff; |
| incval = 2; |
| break; |
| case 20: |
| rv &= 0xfffff; |
| incval = 4; |
| break; |
| case 32: |
| rv &= 0xffffffff; |
| incval = 4; |
| break; |
| } |
| |
| if (op->type == MSP430_Operand_Indirect_Postinc) |
| REG_PUT (op->reg, REG_GET (op->reg) + incval); |
| |
| return rv; |
| } |
| |
| static int |
| put_op (SIM_DESC sd, MSP430_Opcode_Decoded *opc, int n, int val) |
| { |
| MSP430_Opcode_Operand *op = opc->op + n; |
| int rv = 0; |
| int addr; |
| unsigned char buf[4]; |
| int incval = 0; |
| |
| switch (opc->size) |
| { |
| case 8: |
| val &= 0xff; |
| break; |
| case 16: |
| val &= 0xffff; |
| break; |
| case 20: |
| val &= 0xfffff; |
| break; |
| case 32: |
| val &= 0xffffffff; |
| break; |
| } |
| |
| switch (op->type) |
| { |
| case MSP430_Operand_Register: |
| REG (op->reg) = val; |
| REG_PUT (op->reg, val); |
| break; |
| case MSP430_Operand_Indirect: |
| case MSP430_Operand_Indirect_Postinc: |
| addr = op->addend; |
| if (op->reg != MSR_None) |
| { |
| int reg = REG_GET (op->reg); |
| int sign = opc->ofs_430x ? 20 : 16; |
| |
| /* Index values are signed. */ |
| if (addr & (1 << (sign - 1))) |
| addr |= -(1 << sign); |
| |
| addr += reg; |
| |
| /* For MSP430 instructions the sum is limited to 16 bits if the |
| address in the index register is less than 64k even if we are |
| running on an MSP430X CPU. This is for MSP430 compatibility. */ |
| if (reg < 0x10000 && ! opc->ofs_430x) |
| { |
| if (addr >= 0x10000) |
| fprintf (stderr, " XXX WRAPPING ADDRESS %x on write\n", addr); |
| |
| addr &= 0xffff; |
| } |
| } |
| addr &= 0xfffff; |
| |
| TRACE_MEMORY (MSP430_CPU (sd), "PUT: [%#x].%d <- %#x", addr, opc->size, |
| val); |
| #if 0 |
| /* Hack - MSP430X5438 serial port transmit register. */ |
| if (addr == 0x5ce) |
| putchar (val); |
| #endif |
| if ((addr >= 0x130 && addr <= 0x15B) |
| || (addr >= 0x4C0 && addr <= 0x4EB)) |
| { |
| signed int a,b; |
| |
| /* Hardware Multiply emulation. */ |
| assert (opc->size == 16); |
| |
| switch (addr) |
| { |
| case 0x4C0: |
| case 0x130: |
| HWMULT (sd, hwmult_op1) = val; |
| HWMULT (sd, hwmult_type) = UNSIGN_32; |
| break; |
| |
| case 0x4C2: |
| case 0x132: |
| HWMULT (sd, hwmult_op1) = val; |
| HWMULT (sd, hwmult_type) = SIGN_32; |
| break; |
| |
| case 0x4C4: |
| case 0x134: |
| HWMULT (sd, hwmult_op1) = val; |
| HWMULT (sd, hwmult_type) = UNSIGN_MAC_32; |
| break; |
| |
| case 0x4C6: |
| case 0x136: |
| HWMULT (sd, hwmult_op1) = val; |
| HWMULT (sd, hwmult_type) = SIGN_MAC_32; |
| break; |
| |
| case 0x4C8: |
| case 0x138: |
| HWMULT (sd, hwmult_op2) = val; |
| switch (HWMULT (sd, hwmult_type)) |
| { |
| case UNSIGN_32: |
| a = HWMULT (sd, hwmult_op1); |
| b = HWMULT (sd, hwmult_op2); |
| /* For unsigned 32-bit multiplication of 16-bit operands, an |
| explicit cast is required to prevent any implicit |
| sign-extension. */ |
| HWMULT (sd, hwmult_result) = (unsigned32) a * (unsigned32) b; |
| HWMULT (sd, hwmult_signed_result) = a * b; |
| HWMULT (sd, hwmult_accumulator) = HWMULT (sd, hwmult_signed_accumulator) = 0; |
| break; |
| |
| case SIGN_32: |
| a = sign_ext (HWMULT (sd, hwmult_op1), 16); |
| b = sign_ext (HWMULT (sd, hwmult_op2), 16); |
| HWMULT (sd, hwmult_signed_result) = a * b; |
| HWMULT (sd, hwmult_result) = (unsigned32) a * (unsigned32) b; |
| HWMULT (sd, hwmult_accumulator) = HWMULT (sd, hwmult_signed_accumulator) = 0; |
| break; |
| |
| case UNSIGN_MAC_32: |
| a = HWMULT (sd, hwmult_op1); |
| b = HWMULT (sd, hwmult_op2); |
| HWMULT (sd, hwmult_accumulator) |
| += (unsigned32) a * (unsigned32) b; |
| HWMULT (sd, hwmult_signed_accumulator) += a * b; |
| HWMULT (sd, hwmult_result) = HWMULT (sd, hwmult_accumulator); |
| HWMULT (sd, hwmult_signed_result) = HWMULT (sd, hwmult_signed_accumulator); |
| break; |
| |
| case SIGN_MAC_32: |
| a = sign_ext (HWMULT (sd, hwmult_op1), 16); |
| b = sign_ext (HWMULT (sd, hwmult_op2), 16); |
| HWMULT (sd, hwmult_accumulator) |
| += (unsigned32) a * (unsigned32) b; |
| HWMULT (sd, hwmult_signed_accumulator) += a * b; |
| HWMULT (sd, hwmult_result) = HWMULT (sd, hwmult_accumulator); |
| HWMULT (sd, hwmult_signed_result) = HWMULT (sd, hwmult_signed_accumulator); |
| break; |
| } |
| break; |
| |
| case 0x4CA: |
| case 0x13A: |
| /* Copy into LOW result... */ |
| switch (HWMULT (sd, hwmult_type)) |
| { |
| case UNSIGN_MAC_32: |
| case UNSIGN_32: |
| HWMULT (sd, hwmult_accumulator) = HWMULT (sd, hwmult_result) = zero_ext (val, 16); |
| HWMULT (sd, hwmult_signed_accumulator) = sign_ext (val, 16); |
| break; |
| case SIGN_MAC_32: |
| case SIGN_32: |
| HWMULT (sd, hwmult_signed_accumulator) = HWMULT (sd, hwmult_result) = sign_ext (val, 16); |
| HWMULT (sd, hwmult_accumulator) = zero_ext (val, 16); |
| break; |
| } |
| break; |
| |
| case 0x4D0: |
| case 0x140: |
| HWMULT (sd, hw32mult_op1) = val; |
| HWMULT (sd, hw32mult_type) = UNSIGN_64; |
| break; |
| |
| case 0x4D2: |
| case 0x142: |
| HWMULT (sd, hw32mult_op1) = (HWMULT (sd, hw32mult_op1) & 0xFFFF) | (val << 16); |
| break; |
| |
| case 0x4D4: |
| case 0x144: |
| HWMULT (sd, hw32mult_op1) = val; |
| HWMULT (sd, hw32mult_type) = SIGN_64; |
| break; |
| |
| case 0x4D6: |
| case 0x146: |
| HWMULT (sd, hw32mult_op1) = (HWMULT (sd, hw32mult_op1) & 0xFFFF) | (val << 16); |
| break; |
| |
| case 0x4E0: |
| case 0x150: |
| HWMULT (sd, hw32mult_op2) = val; |
| break; |
| |
| case 0x4E2: |
| case 0x152: |
| HWMULT (sd, hw32mult_op2) = (HWMULT (sd, hw32mult_op2) & 0xFFFF) | (val << 16); |
| switch (HWMULT (sd, hw32mult_type)) |
| { |
| case UNSIGN_64: |
| HWMULT (sd, hw32mult_result) |
| = (unsigned64) HWMULT (sd, hw32mult_op1) |
| * (unsigned64) HWMULT (sd, hw32mult_op2); |
| break; |
| case SIGN_64: |
| HWMULT (sd, hw32mult_result) |
| = sign_ext (HWMULT (sd, hw32mult_op1), 32) |
| * sign_ext (HWMULT (sd, hw32mult_op2), 32); |
| break; |
| } |
| break; |
| |
| default: |
| fprintf (stderr, "unimplemented HW MULT write to %x!\n", addr); |
| break; |
| } |
| } |
| |
| switch (opc->size) |
| { |
| case 8: |
| buf[0] = val; |
| sim_core_write_buffer (sd, MSP430_CPU (sd), write_map, buf, addr, 1); |
| break; |
| case 16: |
| buf[0] = val; |
| buf[1] = val >> 8; |
| sim_core_write_buffer (sd, MSP430_CPU (sd), write_map, buf, addr, 2); |
| break; |
| case 20: |
| case 32: |
| buf[0] = val; |
| buf[1] = val >> 8; |
| buf[2] = val >> 16; |
| buf[3] = val >> 24; |
| sim_core_write_buffer (sd, MSP430_CPU (sd), write_map, buf, addr, 4); |
| break; |
| default: |
| assert (! opc->size); |
| break; |
| } |
| break; |
| default: |
| fprintf (stderr, "invalid operand %d type %d\n", n, op->type); |
| abort (); |
| } |
| |
| switch (opc->size) |
| { |
| case 8: |
| rv &= 0xff; |
| incval = 1; |
| break; |
| case 16: |
| rv &= 0xffff; |
| incval = 2; |
| break; |
| case 20: |
| rv &= 0xfffff; |
| incval = 4; |
| break; |
| case 32: |
| rv &= 0xffffffff; |
| incval = 4; |
| break; |
| } |
| |
| if (op->type == MSP430_Operand_Indirect_Postinc) |
| { |
| int new_val = REG_GET (op->reg) + incval; |
| /* SP is always word-aligned. */ |
| if (op->reg == MSR_SP && (new_val & 1)) |
| new_val ++; |
| REG_PUT (op->reg, new_val); |
| } |
| |
| return rv; |
| } |
| |
| static void |
| mem_put_val (SIM_DESC sd, int addr, int val, int bits) |
| { |
| MSP430_Opcode_Decoded opc; |
| |
| opc.size = bits; |
| opc.op[0].type = MSP430_Operand_Indirect; |
| opc.op[0].addend = addr; |
| opc.op[0].reg = MSR_None; |
| put_op (sd, &opc, 0, val); |
| } |
| |
| static int |
| mem_get_val (SIM_DESC sd, int addr, int bits) |
| { |
| MSP430_Opcode_Decoded opc; |
| |
| opc.size = bits; |
| opc.op[0].type = MSP430_Operand_Indirect; |
| opc.op[0].addend = addr; |
| opc.op[0].reg = MSR_None; |
| return get_op (sd, &opc, 0); |
| } |
| |
| #define CIO_OPEN (0xF0) |
| #define CIO_CLOSE (0xF1) |
| #define CIO_READ (0xF2) |
| #define CIO_WRITE (0xF3) |
| #define CIO_LSEEK (0xF4) |
| #define CIO_UNLINK (0xF5) |
| #define CIO_GETENV (0xF6) |
| #define CIO_RENAME (0xF7) |
| #define CIO_GETTIME (0xF8) |
| #define CIO_GETCLK (0xF9) |
| #define CIO_SYNC (0xFF) |
| |
| #define CIO_I(n) (parms[(n)] + parms[(n)+1] * 256) |
| #define CIO_L(n) (parms[(n)] + parms[(n)+1] * 256 \ |
| + parms[(n)+2] * 65536 + parms[(n)+3] * 16777216) |
| |
| static void |
| msp430_cio (SIM_DESC sd) |
| { |
| /* A block of data at __CIOBUF__ describes the I/O operation to |
| perform. */ |
| |
| unsigned char raw_parms[13]; |
| unsigned char parms[8]; |
| long length; |
| int command; |
| unsigned char buffer[512]; |
| long ret_buflen = 0; |
| long fd, addr, len, rv; |
| |
| sim_core_read_buffer (sd, MSP430_CPU (sd), 0, parms, |
| MSP430_CPU (sd)->state.cio_buffer, 5); |
| length = CIO_I (0); |
| command = parms[2]; |
| |
| sim_core_read_buffer (sd, MSP430_CPU (sd), 0, parms, |
| MSP430_CPU (sd)->state.cio_buffer + 3, 8); |
| |
| sim_core_read_buffer (sd, MSP430_CPU (sd), 0, buffer, |
| MSP430_CPU (sd)->state.cio_buffer + 11, length); |
| |
| switch (command) |
| { |
| case CIO_WRITE: |
| fd = CIO_I (0); |
| len = CIO_I (2); |
| |
| rv = write (fd, buffer, len); |
| parms[0] = rv & 0xff; |
| parms[1] = rv >> 8; |
| |
| break; |
| } |
| |
| sim_core_write_buffer (sd, MSP430_CPU (sd), 0, parms, |
| MSP430_CPU (sd)->state.cio_buffer + 4, 8); |
| if (ret_buflen) |
| sim_core_write_buffer (sd, MSP430_CPU (sd), 0, buffer, |
| MSP430_CPU (sd)->state.cio_buffer + 12, ret_buflen); |
| } |
| |
| #define SRC get_op (sd, opcode, 1) |
| #define DSRC get_op (sd, opcode, 0) |
| #define DEST(V) put_op (sd, opcode, 0, (V)) |
| |
| #define DO_ALU(OP,SOP,MORE) \ |
| { \ |
| int s1 = DSRC; \ |
| int s2 = SRC; \ |
| int result = s1 OP s2 MORE; \ |
| TRACE_ALU (MSP430_CPU (sd), "ALU: %#x %s %#x %s = %#x", s1, SOP, \ |
| s2, #MORE, result); \ |
| DEST (result); \ |
| } |
| |
| #define SIGN (1 << (opcode->size - 1)) |
| #define POS(x) (((x) & SIGN) ? 0 : 1) |
| #define NEG(x) (((x) & SIGN) ? 1 : 0) |
| |
| #define SX(v) sign_ext (v, opcode->size) |
| #define ZX(v) zero_ext (v, opcode->size) |
| |
| static char * |
| flags2string (int f) |
| { |
| static char buf[2][6]; |
| static int bi = 0; |
| char *bp = buf[bi]; |
| |
| bi = (bi + 1) % 2; |
| |
| bp[0] = f & MSP430_FLAG_V ? 'V' : '-'; |
| bp[1] = f & MSP430_FLAG_N ? 'N' : '-'; |
| bp[2] = f & MSP430_FLAG_Z ? 'Z' : '-'; |
| bp[3] = f & MSP430_FLAG_C ? 'C' : '-'; |
| bp[4] = 0; |
| return bp; |
| } |
| |
| /* Random number that won't show up in our usual logic. */ |
| #define MAGIC_OVERFLOW 0x55000F |
| |
| static void |
| do_flags (SIM_DESC sd, |
| MSP430_Opcode_Decoded *opcode, |
| int vnz_val, /* Signed result. */ |
| int carry, |
| int overflow) |
| { |
| int f = SR; |
| int new_f = 0; |
| int signbit = 1 << (opcode->size - 1); |
| |
| f &= ~opcode->flags_0; |
| f &= ~opcode->flags_set; |
| f |= opcode->flags_1; |
| |
| if (vnz_val & signbit) |
| new_f |= MSP430_FLAG_N; |
| if (! (vnz_val & ((signbit << 1) - 1))) |
| new_f |= MSP430_FLAG_Z; |
| if (overflow == MAGIC_OVERFLOW) |
| { |
| if (vnz_val != SX (vnz_val)) |
| new_f |= MSP430_FLAG_V; |
| } |
| else |
| if (overflow) |
| new_f |= MSP430_FLAG_V; |
| if (carry) |
| new_f |= MSP430_FLAG_C; |
| |
| new_f = f | (new_f & opcode->flags_set); |
| if (SR != new_f) |
| TRACE_ALU (MSP430_CPU (sd), "FLAGS: %s -> %s", flags2string (SR), |
| flags2string (new_f)); |
| else |
| TRACE_ALU (MSP430_CPU (sd), "FLAGS: %s", flags2string (new_f)); |
| SR = new_f; |
| } |
| |
| #define FLAGS(vnz,c) do_flags (sd, opcode, vnz, c, MAGIC_OVERFLOW) |
| #define FLAGSV(vnz,c,v) do_flags (sd, opcode, vnz, c, v) |
| |
| /* These two assume unsigned 16-bit (four digit) words. |
| Mask off unwanted bits for byte operations. */ |
| |
| static int |
| bcd_to_binary (int v) |
| { |
| int r = ( ((v >> 0) & 0xf) * 1 |
| + ((v >> 4) & 0xf) * 10 |
| + ((v >> 8) & 0xf) * 100 |
| + ((v >> 12) & 0xf) * 1000); |
| return r; |
| } |
| |
| static int |
| binary_to_bcd (int v) |
| { |
| int r = ( ((v / 1) % 10) << 0 |
| | ((v / 10) % 10) << 4 |
| | ((v / 100) % 10) << 8 |
| | ((v / 1000) % 10) << 12); |
| return r; |
| } |
| |
| static const char * |
| cond_string (int cond) |
| { |
| switch (cond) |
| { |
| case MSC_nz: |
| return "NZ"; |
| case MSC_z: |
| return "Z"; |
| case MSC_nc: |
| return "NC"; |
| case MSC_c: |
| return "C"; |
| case MSC_n: |
| return "N"; |
| case MSC_ge: |
| return "GE"; |
| case MSC_l: |
| return "L"; |
| case MSC_true: |
| return "MP"; |
| default: |
| return "??"; |
| } |
| } |
| |
| /* Checks a CALL to address CALL_ADDR. If this is a special |
| syscall address then the call is simulated and non-zero is |
| returned. Otherwise 0 is returned. */ |
| |
| static int |
| maybe_perform_syscall (SIM_DESC sd, int call_addr) |
| { |
| if (call_addr == 0x00160) |
| { |
| int i; |
| |
| for (i = 0; i < 16; i++) |
| { |
| if (i % 4 == 0) |
| fprintf (stderr, "\t"); |
| fprintf (stderr, "R%-2d %05x ", i, MSP430_CPU (sd)->state.regs[i]); |
| if (i % 4 == 3) |
| { |
| int sp = SP + (3 - (i / 4)) * 2; |
| unsigned char buf[2]; |
| |
| sim_core_read_buffer (sd, MSP430_CPU (sd), read_map, buf, sp, 2); |
| |
| fprintf (stderr, "\tSP%+d: %04x", sp - SP, |
| buf[0] + buf[1] * 256); |
| |
| if (i / 4 == 0) |
| { |
| int flags = SR; |
| |
| fprintf (stderr, flags & 0x100 ? " V" : " -"); |
| fprintf (stderr, flags & 0x004 ? "N" : "-"); |
| fprintf (stderr, flags & 0x002 ? "Z" : "-"); |
| fprintf (stderr, flags & 0x001 ? "C" : "-"); |
| } |
| |
| fprintf (stderr, "\n"); |
| } |
| } |
| return 1; |
| } |
| |
| if ((call_addr & ~0x3f) == 0x00180) |
| { |
| /* Syscall! */ |
| int arg1, arg2, arg3, arg4; |
| int syscall_num = call_addr & 0x3f; |
| |
| /* syscall_num == 2 is used for the variadic function "open". |
| The arguments are set up differently for variadic functions. |
| See slaa534.pdf distributed by TI. */ |
| if (syscall_num == 2) |
| { |
| arg1 = MSP430_CPU (sd)->state.regs[12]; |
| arg2 = mem_get_val (sd, SP, 16); |
| arg3 = mem_get_val (sd, SP + 2, 16); |
| arg4 = mem_get_val (sd, SP + 4, 16); |
| } |
| else |
| { |
| arg1 = MSP430_CPU (sd)->state.regs[12]; |
| arg2 = MSP430_CPU (sd)->state.regs[13]; |
| arg3 = MSP430_CPU (sd)->state.regs[14]; |
| arg4 = MSP430_CPU (sd)->state.regs[15]; |
| } |
| |
| MSP430_CPU (sd)->state.regs[12] = sim_syscall (MSP430_CPU (sd), |
| syscall_num, arg1, arg2, |
| arg3, arg4); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| msp430_step_once (SIM_DESC sd) |
| { |
| Get_Byte_Local_Data ld; |
| unsigned char buf[100]; |
| int i; |
| int opsize; |
| unsigned int opcode_pc; |
| MSP430_Opcode_Decoded opcode_buf; |
| MSP430_Opcode_Decoded *opcode = &opcode_buf; |
| int s1, s2, result; |
| int u1 = 0, u2, uresult; |
| int c = 0, reg; |
| int sp; |
| int carry_to_use; |
| int n_repeats; |
| int rept; |
| int op_bytes = 0, op_bits; |
| |
| PC &= 0xfffff; |
| opcode_pc = PC; |
| |
| if (opcode_pc < 0x10) |
| { |
| fprintf (stderr, "Fault: PC(%#x) is less than 0x10\n", opcode_pc); |
| sim_engine_halt (sd, MSP430_CPU (sd), NULL, |
| MSP430_CPU (sd)->state.regs[0], |
| sim_exited, -1); |
| return; |
| } |
| |
| if (PC == MSP430_CPU (sd)->state.cio_breakpoint |
| && STATE_OPEN_KIND (sd) != SIM_OPEN_DEBUG) |
| msp430_cio (sd); |
| |
| ld.sd = sd; |
| ld.gb_addr = PC; |
| opsize = msp430_decode_opcode (MSP430_CPU (sd)->state.regs[0], |
| opcode, msp430_getbyte, &ld); |
| PC += opsize; |
| if (opsize <= 0) |
| { |
| fprintf (stderr, "Fault: undecodable opcode at %#x\n", opcode_pc); |
| sim_engine_halt (sd, MSP430_CPU (sd), NULL, |
| MSP430_CPU (sd)->state.regs[0], |
| sim_exited, -1); |
| return; |
| } |
| |
| if (opcode->repeat_reg) |
| n_repeats = (MSP430_CPU (sd)->state.regs[opcode->repeats] & 0x000f) + 1; |
| else |
| n_repeats = opcode->repeats + 1; |
| |
| op_bits = opcode->size; |
| switch (op_bits) |
| { |
| case 8: |
| op_bytes = 1; |
| break; |
| case 16: |
| op_bytes = 2; |
| break; |
| case 20: |
| case 32: |
| op_bytes = 4; |
| break; |
| } |
| |
| if (TRACE_ANY_P (MSP430_CPU (sd))) |
| trace_prefix (sd, MSP430_CPU (sd), NULL_CIA, opcode_pc, |
| TRACE_LINENUM_P (MSP430_CPU (sd)), NULL, 0, " "); |
| |
| TRACE_DISASM (MSP430_CPU (sd), opcode_pc); |
| |
| carry_to_use = 0; |
| switch (opcode->id) |
| { |
| case MSO_unknown: |
| break; |
| |
| /* Double-operand instructions. */ |
| case MSO_mov: |
| if (opcode->n_bytes == 2 |
| && opcode->op[0].type == MSP430_Operand_Register |
| && opcode->op[0].reg == MSR_CG |
| && opcode->op[1].type == MSP430_Operand_Immediate |
| && opcode->op[1].addend == 0 |
| /* A 16-bit write of #0 is a NOP; an 8-bit write is a BRK. */ |
| && opcode->size == 8) |
| { |
| /* This is the designated software breakpoint instruction. */ |
| PC -= opsize; |
| sim_engine_halt (sd, MSP430_CPU (sd), NULL, |
| MSP430_CPU (sd)->state.regs[0], |
| sim_stopped, SIM_SIGTRAP); |
| |
| } |
| else |
| { |
| /* Otherwise, do the move. */ |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| DEST (SRC); |
| } |
| } |
| break; |
| |
| case MSO_addc: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| carry_to_use = (SR & MSP430_FLAG_C) ? 1 : 0; |
| u1 = DSRC; |
| u2 = SRC; |
| s1 = SX (u1); |
| s2 = SX (u2); |
| uresult = u1 + u2 + carry_to_use; |
| result = s1 + s2 + carry_to_use; |
| TRACE_ALU (MSP430_CPU (sd), "ADDC: %#x + %#x + %d = %#x", |
| u1, u2, carry_to_use, uresult); |
| DEST (result); |
| FLAGS (result, uresult != ZX (uresult)); |
| } |
| break; |
| |
| case MSO_add: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = DSRC; |
| u2 = SRC; |
| s1 = SX (u1); |
| s2 = SX (u2); |
| uresult = u1 + u2; |
| result = s1 + s2; |
| TRACE_ALU (MSP430_CPU (sd), "ADD: %#x + %#x = %#x", |
| u1, u2, uresult); |
| DEST (result); |
| FLAGS (result, uresult != ZX (uresult)); |
| } |
| break; |
| |
| case MSO_subc: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| carry_to_use = (SR & MSP430_FLAG_C) ? 1 : 0; |
| u1 = DSRC; |
| u2 = SRC; |
| s1 = SX (u1); |
| s2 = SX (u2); |
| uresult = ZX (~u2) + u1 + carry_to_use; |
| result = s1 - s2 + (carry_to_use - 1); |
| TRACE_ALU (MSP430_CPU (sd), "SUBC: %#x - %#x + %d = %#x", |
| u1, u2, carry_to_use, uresult); |
| DEST (result); |
| FLAGS (result, uresult != ZX (uresult)); |
| } |
| break; |
| |
| case MSO_sub: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = DSRC; |
| u2 = SRC; |
| s1 = SX (u1); |
| s2 = SX (u2); |
| uresult = ZX (~u2) + u1 + 1; |
| result = SX (uresult); |
| TRACE_ALU (MSP430_CPU (sd), "SUB: %#x - %#x = %#x", |
| u1, u2, uresult); |
| DEST (result); |
| FLAGS (result, uresult != ZX (uresult)); |
| } |
| break; |
| |
| case MSO_cmp: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = DSRC; |
| u2 = SRC; |
| s1 = SX (u1); |
| s2 = SX (u2); |
| uresult = ZX (~u2) + u1 + 1; |
| result = s1 - s2; |
| TRACE_ALU (MSP430_CPU (sd), "CMP: %#x - %#x = %x", |
| u1, u2, uresult); |
| FLAGS (result, uresult != ZX (uresult)); |
| } |
| break; |
| |
| case MSO_dadd: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| carry_to_use = (SR & MSP430_FLAG_C) ? 1 : 0; |
| u1 = DSRC; |
| u2 = SRC; |
| uresult = bcd_to_binary (u1) + bcd_to_binary (u2) + carry_to_use; |
| result = binary_to_bcd (uresult); |
| TRACE_ALU (MSP430_CPU (sd), "DADD: %#x + %#x + %d = %#x", |
| u1, u2, carry_to_use, result); |
| DEST (result); |
| FLAGS (result, uresult > ((opcode->size == 8) ? 99 : 9999)); |
| } |
| break; |
| |
| case MSO_and: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = DSRC; |
| u2 = SRC; |
| uresult = u1 & u2; |
| TRACE_ALU (MSP430_CPU (sd), "AND: %#x & %#x = %#x", |
| u1, u2, uresult); |
| DEST (uresult); |
| FLAGS (uresult, uresult != 0); |
| } |
| break; |
| |
| case MSO_bit: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = DSRC; |
| u2 = SRC; |
| uresult = u1 & u2; |
| TRACE_ALU (MSP430_CPU (sd), "BIT: %#x & %#x -> %#x", |
| u1, u2, uresult); |
| FLAGS (uresult, uresult != 0); |
| } |
| break; |
| |
| case MSO_bic: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = DSRC; |
| u2 = SRC; |
| uresult = u1 & ~ u2; |
| TRACE_ALU (MSP430_CPU (sd), "BIC: %#x & ~ %#x = %#x", |
| u1, u2, uresult); |
| DEST (uresult); |
| } |
| break; |
| |
| case MSO_bis: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = DSRC; |
| u2 = SRC; |
| uresult = u1 | u2; |
| TRACE_ALU (MSP430_CPU (sd), "BIS: %#x | %#x = %#x", |
| u1, u2, uresult); |
| DEST (uresult); |
| } |
| break; |
| |
| case MSO_xor: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| s1 = 1 << (opcode->size - 1); |
| u1 = DSRC; |
| u2 = SRC; |
| uresult = u1 ^ u2; |
| TRACE_ALU (MSP430_CPU (sd), "XOR: %#x & %#x = %#x", |
| u1, u2, uresult); |
| DEST (uresult); |
| FLAGSV (uresult, uresult != 0, (u1 & s1) && (u2 & s1)); |
| } |
| break; |
| |
| /* Single-operand instructions. Note: the decoder puts the same |
| operand in SRC as in DEST, for our convenience. */ |
| |
| case MSO_rrc: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = SRC; |
| carry_to_use = u1 & 1; |
| uresult = u1 >> 1; |
| /* If the ZC bit of the opcode is set, it means we are synthesizing |
| RRUX, so the carry bit must be ignored. */ |
| if (opcode->zc == 0 && (SR & MSP430_FLAG_C)) |
| uresult |= (1 << (opcode->size - 1)); |
| TRACE_ALU (MSP430_CPU (sd), "RRC: %#x >>= %#x", |
| u1, uresult); |
| DEST (uresult); |
| FLAGS (uresult, carry_to_use); |
| } |
| break; |
| |
| case MSO_swpb: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = SRC; |
| uresult = ((u1 >> 8) & 0x00ff) | ((u1 << 8) & 0xff00); |
| TRACE_ALU (MSP430_CPU (sd), "SWPB: %#x -> %#x", |
| u1, uresult); |
| DEST (uresult); |
| } |
| break; |
| |
| case MSO_rra: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = SRC; |
| c = u1 & 1; |
| s1 = 1 << (opcode->size - 1); |
| uresult = (u1 >> 1) | (u1 & s1); |
| TRACE_ALU (MSP430_CPU (sd), "RRA: %#x >>= %#x", |
| u1, uresult); |
| DEST (uresult); |
| FLAGS (uresult, c); |
| } |
| break; |
| |
| case MSO_rru: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = SRC; |
| c = u1 & 1; |
| uresult = (u1 >> 1); |
| TRACE_ALU (MSP430_CPU (sd), "RRU: %#x >>= %#x", |
| u1, uresult); |
| DEST (uresult); |
| FLAGS (uresult, c); |
| } |
| break; |
| |
| case MSO_sxt: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| u1 = SRC; |
| if (u1 & 0x80) |
| uresult = u1 | 0xfff00; |
| else |
| uresult = u1 & 0x000ff; |
| TRACE_ALU (MSP430_CPU (sd), "SXT: %#x -> %#x", |
| u1, uresult); |
| DEST (uresult); |
| FLAGS (uresult, c); |
| } |
| break; |
| |
| case MSO_push: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| int new_sp; |
| |
| new_sp = REG_GET (MSR_SP) - op_bytes; |
| /* SP is always word-aligned. */ |
| if (new_sp & 1) |
| new_sp --; |
| REG_PUT (MSR_SP, new_sp); |
| u1 = SRC; |
| mem_put_val (sd, SP, u1, op_bits); |
| if (opcode->op[1].type == MSP430_Operand_Register) |
| opcode->op[1].reg --; |
| } |
| break; |
| |
| case MSO_pop: |
| for (rept = 0; rept < n_repeats; rept ++) |
| { |
| int new_sp; |
| |
| u1 = mem_get_val (sd, SP, op_bits); |
| DEST (u1); |
| if (opcode->op[0].type == MSP430_Operand_Register) |
| opcode->op[0].reg ++; |
| new_sp = REG_GET (MSR_SP) + op_bytes; |
| /* SP is always word-aligned. */ |
| if (new_sp & 1) |
| new_sp ++; |
| REG_PUT (MSR_SP, new_sp); |
| } |
| break; |
| |
| case MSO_call: |
| u1 = SRC; |
| |
| if (maybe_perform_syscall (sd, u1)) |
| break; |
| |
| REG_PUT (MSR_SP, REG_GET (MSR_SP) - op_bytes); |
| mem_put_val (sd, SP, PC, op_bits); |
| TRACE_ALU (MSP430_CPU (sd), "CALL: func %#x ret %#x, sp %#x", |
| u1, PC, SP); |
| REG_PUT (MSR_PC, u1); |
| break; |
| |
| case MSO_reti: |
| u1 = mem_get_val (sd, SP, 16); |
| SR = u1 & 0xFF; |
| SP += 2; |
| PC = mem_get_val (sd, SP, 16); |
| SP += 2; |
| /* Emulate the RETI action of the 20-bit CPUX architecure. |
| This is safe for 16-bit CPU architectures as well, since the top |
| 8-bits of SR will have been written to the stack here, and will |
| have been read as 0. */ |
| PC |= (u1 & 0xF000) << 4; |
| TRACE_ALU (MSP430_CPU (sd), "RETI: pc %#x sr %#x", |
| PC, SR); |
| break; |
| |
| /* Jumps. */ |
| |
| case MSO_jmp: |
| i = SRC; |
| switch (opcode->cond) |
| { |
| case MSC_nz: |
| u1 = (SR & MSP430_FLAG_Z) ? 0 : 1; |
| break; |
| case MSC_z: |
| u1 = (SR & MSP430_FLAG_Z) ? 1 : 0; |
| break; |
| case MSC_nc: |
| u1 = (SR & MSP430_FLAG_C) ? 0 : 1; |
| break; |
| case MSC_c: |
| u1 = (SR & MSP430_FLAG_C) ? 1 : 0; |
| break; |
| case MSC_n: |
| u1 = (SR & MSP430_FLAG_N) ? 1 : 0; |
| break; |
| case MSC_ge: |
| u1 = (!!(SR & MSP430_FLAG_N) == !!(SR & MSP430_FLAG_V)) ? 1 : 0; |
| break; |
| case MSC_l: |
| u1 = (!!(SR & MSP430_FLAG_N) == !!(SR & MSP430_FLAG_V)) ? 0 : 1; |
| break; |
| case MSC_true: |
| u1 = 1; |
| break; |
| } |
| |
| if (u1) |
| { |
| TRACE_BRANCH (MSP430_CPU (sd), "J%s: pc %#x -> %#x sr %#x, taken", |
| cond_string (opcode->cond), PC, i, SR); |
| PC = i; |
| if (PC == opcode_pc) |
| exit (0); |
| } |
| else |
| TRACE_BRANCH (MSP430_CPU (sd), "J%s: pc %#x to %#x sr %#x, not taken", |
| cond_string (opcode->cond), PC, i, SR); |
| break; |
| |
| default: |
| fprintf (stderr, "error: unexpected opcode id %d\n", opcode->id); |
| exit (1); |
| } |
| } |
| |
| void |
| sim_engine_run (SIM_DESC sd, |
| int next_cpu_nr, |
| int nr_cpus, |
| int siggnal) |
| { |
| while (1) |
| { |
| msp430_step_once (sd); |
| if (sim_events_tick (sd)) |
| sim_events_process (sd); |
| } |
| } |