# Makefile.in generated automatically by automake 1.4 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
AR = @AR@
AS = @AS@
BFD_HOST_64BIT_LONG = @BFD_HOST_64BIT_LONG@
BFD_HOST_64_BIT = @BFD_HOST_64_BIT@
BFD_HOST_64_BIT_DEFINED = @BFD_HOST_64_BIT_DEFINED@
BFD_HOST_U_64_BIT = @BFD_HOST_U_64_BIT@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CC_FOR_BUILD = @CC_FOR_BUILD@
COREFILE = @COREFILE@
COREFLAG = @COREFLAG@
DATADIRNAME = @DATADIRNAME@
DLLTOOL = @DLLTOOL@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GT_NO = @GT_NO@
GT_YES = @GT_YES@
HDEFINES = @HDEFINES@
INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
INSTOBJEXT = @INSTOBJEXT@
INTLDEPS = @INTLDEPS@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
LD = @LD@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
NM = @NM@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
RANLIB = @RANLIB@
TDEFINES = @TDEFINES@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
VERSION = @VERSION@
WIN32LDFLAGS = @WIN32LDFLAGS@
WIN32LIBADD = @WIN32LIBADD@
all_backends = @all_backends@
bfd_backends = @bfd_backends@
bfd_machines = @bfd_machines@
l = @l@
tdefaults = @tdefaults@
wordsize = @wordsize@

AUTOMAKE_OPTIONS = cygnus

DOCFILES = aoutx.texi  archive.texi archures.texi \
	bfdt.texi  cache.texi coffcode.texi \
	core.texi elf.texi elfcode.texi  format.texi  libbfd.texi  \
	opncls.texi  reloc.texi  section.texi  \
	syms.texi  targets.texi init.texi hash.texi linker.texi


PROTOS = archive.p archures.p bfd.p \
	 core.p format.p \
	libbfd.p opncls.p reloc.p \
	section.p syms.p targets.p  \
	format.p  core.p init.p


IPROTOS = cache.ip libbfd.ip reloc.ip init.ip archures.ip coffcode.ip

# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction 
# between VPATH and suffix rules.  If you use GNU Make, perhaps other Makes,
# you don't need these three:
SRCDOC = $(srcdir)/../aoutx.h  $(srcdir)/../archive.c \
	$(srcdir)/../archures.c $(srcdir)/../bfd.c \
	$(srcdir)/../cache.c $(srcdir)/../coffcode.h \
	$(srcdir)/../corefile.c $(srcdir)/../elf.c \
	$(srcdir)/../elfcode.h  $(srcdir)/../format.c \
	$(srcdir)/../libbfd.c $(srcdir)/../opncls.c \
	$(srcdir)/../reloc.c  $(srcdir)/../section.c \
	$(srcdir)/../syms.c  $(srcdir)/../targets.c \
	$(srcdir)/../hash.c $(srcdir)/../linker.c


SRCPROT = $(srcdir)/../archive.c $(srcdir)/../archures.c \
	$(srcdir)/../bfd.c $(srcdir)/../coffcode.h $(srcdir)/../corefile.c \
	$(srcdir)/../format.c $(srcdir)/../libbfd.c \
	$(srcdir)/../opncls.c $(srcdir)/../reloc.c \
	$(srcdir)/../section.c $(srcdir)/../syms.c \
	$(srcdir)/../targets.c $(srcdir)/../init.c


SRCIPROT = $(srcdir)/../cache.c $(srcdir)/../libbfd.c \
	$(srcdir)/../reloc.c $(srcdir)/../cpu-h8300.c \
	$(srcdir)/../cpu-i960.c $(srcdir)/../archures.c \
	$(srcdir)/../init.c


TEXIDIR = $(srcdir)/../../texinfo/fsf

info_TEXINFOS = bfd.texinfo

MKDOC = chew$(EXEEXT_FOR_BUILD)

noinst_TEXINFOS = bfdint.texi

MOSTLYCLEANFILES = $(MKDOC) *.o

CLEANFILES = s-* *.p *.ip

DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log

MAINTAINERCLEANFILES = $(DOCFILES)
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES = 
TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
INFO_DEPS = bfd.info
DVIS = bfd.dvi
TEXINFOS = bfd.texinfo
DIST_COMMON =  ChangeLog Makefile.am Makefile.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
.SUFFIXES: .dvi .info .ps .texi .texinfo .txi
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --cygnus doc/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status


bfd.info: bfd.texinfo
bfd.dvi: bfd.texinfo


DVIPS = dvips

.texi.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texi.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.texi:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.txi.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<
.dvi.ps:
	$(DVIPS) $< -o $@

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	    if test -f $$d/$$ifile; then \
	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi

uninstall-info:
	$(PRE_UNINSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  ii=yes; \
	else ii=; fi; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  test -z "$ii" \
	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
	done
	@$(NORMAL_UNINSTALL)
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in `cd $$d && eval echo $$base*`; do \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f bfd.aux bfd.cp bfd.cps bfd.dvi bfd.fn bfd.fns bfd.ky bfd.kys \
	  bfd.ps bfd.log bfd.pg bfd.toc bfd.tp bfd.tps bfd.vr bfd.vrs \
	  bfd.op bfd.tr bfd.cv bfd.cn

clean-aminfo:

distclean-aminfo:

maintainer-clean-aminfo:
	for i in $(INFO_DEPS); do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done
clean-info: mostlyclean-aminfo
tags: TAGS
TAGS:


distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = doc

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    cp -pr $$/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
info-am: $(INFO_DEPS)
info: info-am
dvi-am: $(DVIS)
dvi: dvi-am
check-am:
check: check-am
installcheck-am:
installcheck: installcheck-am
install-info-am: 
install-info: install-info-am
install-exec-am:
install-exec: install-exec-am

install-data-am:
install-data: install-data-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am:
uninstall: uninstall-am
all-am: Makefile
all-redirect: all-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:


mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
mostlyclean-am:  mostlyclean-aminfo mostlyclean-generic

mostlyclean: mostlyclean-am

clean-am:  clean-aminfo clean-generic mostlyclean-am

clean: clean-am

distclean-am:  distclean-aminfo distclean-generic clean-am
	-rm -f libtool

distclean: distclean-am

maintainer-clean-am:  maintainer-clean-aminfo maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-am

.PHONY: install-info-am uninstall-info mostlyclean-aminfo \
distclean-aminfo clean-aminfo maintainer-clean-aminfo tags distdir \
info-am info dvi-am dvi check check-am installcheck-am installcheck \
install-info-am install-info install-exec-am install-exec \
install-data-am install-data install-am install uninstall-am uninstall \
all-redirect all-am all installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean


$(MKDOC): chew.o
	$(CC_FOR_BUILD) -o $(MKDOC) chew.o $(LOADLIBES) $(LDFLAGS)

chew.o: chew.c
	$(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c

protos: libbfd.h libcoff.h bfd.h

bfd.info bfd.dvi: $(DOCFILES) bfdsumm.texi bfd.texinfo

# We can't replace these rules with an implicit rule, because
# makes without VPATH support couldn't find the .h files in `..'.

# We use s-XXX targets so that we can distribute the info files,
# and permit people to rebuild them, without requiring the makeinfo
# program.  If somebody tries to rebuild info, but none of the .texi
# files have changed, then this Makefile will build chew, and will
# build all of the stamp files, but will not actually have to rebuild
# bfd.info.

s-aoutx: $(MKDOC) $(srcdir)/../aoutx.h $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../aoutx.h >aoutx.tmp
	$(srcdir)/../../move-if-change aoutx.tmp aoutx.texi
	touch s-aoutx
aoutx.texi: s-aoutx

s-archive: $(MKDOC) $(srcdir)/../archive.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../archive.c >archive.tmp
	$(srcdir)/../../move-if-change archive.tmp archive.texi
	touch s-archive
archive.texi: s-archive

s-archures: $(MKDOC) $(srcdir)/../archures.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../archures.c >archures.tmp
	$(srcdir)/../../move-if-change archures.tmp archures.texi
	touch s-archures
archures.texi: s-archures

# We use bfdt.texi, rather than bfd.texi, to avoid conflicting with
# bfd.texinfo on an 8.3 filesystem.
s-bfd: $(MKDOC) $(srcdir)/../bfd.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfd.c >bfd.tmp
	$(srcdir)/../../move-if-change bfd.tmp bfdt.texi
	touch s-bfd
bfdt.texi: s-bfd

s-cache: $(MKDOC) $(srcdir)/../cache.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../cache.c >cache.tmp
	$(srcdir)/../../move-if-change cache.tmp cache.texi
	touch s-cache
cache.texi: s-cache

s-coffcode: $(MKDOC) $(srcdir)/../coffcode.h $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../coffcode.h >coffcode.tmp
	$(srcdir)/../../move-if-change coffcode.tmp coffcode.texi
	touch s-coffcode
coffcode.texi: s-coffcode

s-core: $(MKDOC) $(srcdir)/../corefile.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../corefile.c >core.tmp
	$(srcdir)/../../move-if-change core.tmp core.texi
	touch s-core
core.texi: s-core

s-elf: $(MKDOC) $(srcdir)/../elf.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../elf.c >elf.tmp
	$(srcdir)/../../move-if-change elf.tmp elf.texi
	touch s-elf
elf.texi: s-elf

s-elfcode: $(MKDOC) $(srcdir)/../elfcode.h $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../elfcode.h >elfcode.tmp
	$(srcdir)/../../move-if-change elfcode.tmp elfcode.texi
	touch s-elfcode
elfcode.texi: s-elfcode

s-format: $(MKDOC) $(srcdir)/../format.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../format.c >format.tmp
	$(srcdir)/../../move-if-change format.tmp format.texi
	touch s-format
format.texi: s-format

s-libbfd: $(MKDOC) $(srcdir)/../libbfd.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../libbfd.c >libbfd.tmp
	$(srcdir)/../../move-if-change libbfd.tmp libbfd.texi
	touch s-libbfd
libbfd.texi: s-libbfd

s-opncls: $(MKDOC) $(srcdir)/../opncls.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str  <$(srcdir)/../opncls.c >opncls.tmp
	$(srcdir)/../../move-if-change opncls.tmp opncls.texi
	touch s-opncls
opncls.texi: s-opncls

s-reloc: $(MKDOC) $(srcdir)/../reloc.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../reloc.c >reloc.tmp
	$(srcdir)/../../move-if-change reloc.tmp reloc.texi
	touch s-reloc
reloc.texi: s-reloc

s-section: $(MKDOC) $(srcdir)/../section.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../section.c >section.tmp
	$(srcdir)/../../move-if-change section.tmp section.texi
	touch s-section
section.texi: s-section

s-syms: $(MKDOC) $(srcdir)/../syms.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../syms.c >syms.tmp
	$(srcdir)/../../move-if-change syms.tmp syms.texi
	touch s-syms
syms.texi: s-syms

s-targets: $(MKDOC) $(srcdir)/../targets.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../targets.c >targets.tmp
	$(srcdir)/../../move-if-change targets.tmp targets.texi
	touch s-targets
targets.texi: s-targets

s-init: $(MKDOC) $(srcdir)/../init.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../init.c >init.tmp
	$(srcdir)/../../move-if-change init.tmp init.texi
	touch s-init
init.texi: s-init

s-hash: $(MKDOC) $(srcdir)/../hash.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../hash.c >hash.tmp
	$(srcdir)/../../move-if-change hash.tmp hash.texi
	touch s-hash
hash.texi: s-hash

s-linker: $(MKDOC) $(srcdir)/../linker.c $(srcdir)/doc.str
	./$(MKDOC) -f $(srcdir)/doc.str <$(srcdir)/../linker.c >linker.tmp
	$(srcdir)/../../move-if-change linker.tmp linker.texi
	touch s-linker
linker.texi: s-linker

libbfd.h: $(srcdir)/../libbfd-in.h	\
	$(srcdir)/../init.c		\
	$(srcdir)/../libbfd.c		\
	$(srcdir)/../cache.c		\
	$(srcdir)/../reloc.c		\
	$(srcdir)/../archures.c		\
	$(srcdir)/proto.str		\
	$(MKDOC)
	cat $(srcdir)/../libbfd-in.h >libbfd.h 
	./$(MKDOC) -i -f $(srcdir)/proto.str  < $(srcdir)/../init.c >>libbfd.h
	./$(MKDOC) -i -f $(srcdir)/proto.str  < $(srcdir)/../libbfd.c >>libbfd.h
	./$(MKDOC) -i -f $(srcdir)/proto.str  < $(srcdir)/../cache.c >>libbfd.h
	./$(MKDOC) -i -f $(srcdir)/proto.str  < $(srcdir)/../reloc.c >>libbfd.h
	./$(MKDOC) -i -f $(srcdir)/proto.str  < $(srcdir)/../archures.c >>libbfd.h
	./$(MKDOC) -i -f $(srcdir)/proto.str  < $(srcdir)/../elf.c >>libbfd.h

libcoff.h: $(srcdir)/../libcoff-in.h	\
	$(srcdir)/../coffcode.h		\
	$(srcdir)/proto.str		\
	$(MKDOC)
	cat $(srcdir)/../libcoff-in.h >libcoff.h
	./$(MKDOC) -i -f $(srcdir)/proto.str  < $(srcdir)/../coffcode.h >>libcoff.h

bfd.h: $(srcdir)/../bfd-in.h 		\
	$(srcdir)/../init.c 		\
	$(srcdir)/../opncls.c 		\
	$(srcdir)/../libbfd.c 		\
	$(srcdir)/../section.c 		\
	$(srcdir)/../archures.c		\
	$(srcdir)/../reloc.c		\
	$(srcdir)/../syms.c		\
	$(srcdir)/../bfd.c		\
	$(srcdir)/../archive.c		\
	$(srcdir)/../corefile.c		\
	$(srcdir)/../targets.c		\
	$(srcdir)/../format.c		\
	$(srcdir)/proto.str		\
	$(MKDOC)
	cat $(srcdir)/../bfd-in.h >bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../init.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../opncls.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../libbfd.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../section.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../archures.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../reloc.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../syms.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../bfd.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../archive.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../corefile.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../targets.c >>bfd.h
	./$(MKDOC) -f $(srcdir)/proto.str<$(srcdir)/../format.c >>bfd.h	
	echo "#ifdef __cplusplus" >>bfd.h
	echo "}" >>bfd.h
	echo "#endif" >>bfd.h
	echo "#endif" >>bfd.h

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: