/* Support for GDB maintenance commands.
   Copyright 1992, 1993, 1994 Free Software Foundation, Inc.
   Written by Fred Fish at Cygnus Support.

This file is part of GDB.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */


#include "defs.h"
#include <ctype.h>
#include <signal.h>
#include "command.h"
#include "gdbcmd.h"
#include "symtab.h"
#include "gdbtypes.h"
#include "demangle.h"
#include "gdbcore.h"
#include "expression.h" /* For language.h */
#include "language.h"
#include "symfile.h"
#include "objfiles.h"
#include "value.h"

#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif

extern void _initialize_maint_cmds PARAMS ((void));

static void maintenance_command PARAMS ((char *, int));

static void maintenance_dump_me PARAMS ((char *, int));

static void maintenance_demangle PARAMS ((char *, int));

static void maintenance_time_display PARAMS ((char *, int));

static void maintenance_space_display PARAMS ((char *, int));

static void maintenance_info_command PARAMS ((char *, int));

static void print_section_table PARAMS ((bfd *, asection *, PTR));

static void maintenance_info_sections PARAMS ((char *, int));

static void maintenance_print_command PARAMS ((char *, int));

/* Set this to the maximum number of seconds to wait instead of waiting forever
   in target_wait().  If this timer times out, then it generates an error and
   the command is aborted.  This replaces most of the need for timeouts in the
   GDB test suite, and makes it possible to distinguish between a hung target
   and one with slow communications.  */

int watchdog = 0;

/*

LOCAL FUNCTION

	maintenance_command -- access the maintenance subcommands

SYNOPSIS

	void maintenance_command (char *args, int from_tty)

DESCRIPTION

*/

static void
maintenance_command (args, from_tty)
     char *args;
     int from_tty;
{
  printf_unfiltered ("\"maintenance\" must be followed by the name of a maintenance command.\n");
  help_list (maintenancelist, "maintenance ", -1, gdb_stdout);
}

#ifndef _WIN32
/* ARGSUSED */
static void
maintenance_dump_me (args, from_tty)
     char *args;
     int from_tty;
{
  if (query ("Should GDB dump core? "))
    {
      signal (SIGQUIT, SIG_DFL);
      kill (getpid (), SIGQUIT);
    }
}
#endif

/*  Someday we should allow demangling for things other than just
    explicit strings.  For example, we might want to be able to
    specify the address of a string in either GDB's process space
    or the debuggee's process space, and have gdb fetch and demangle
    that string.  If we have a char* pointer "ptr" that points to
    a string, we might want to be able to given just the name and
    have GDB demangle and print what it points to, etc.  (FIXME) */

static void
maintenance_demangle (args, from_tty)
     char *args;
     int from_tty;
{
  char *demangled;

  if (args == NULL || *args == '\0')
    {
      printf_unfiltered ("\"maintenance demangle\" takes an argument to demangle.\n");
    }
  else
    {
      demangled = cplus_demangle (args, DMGL_ANSI | DMGL_PARAMS);
      if (demangled != NULL)
	{
	  printf_unfiltered ("%s\n", demangled);
	  free (demangled);
	}
      else
	{
	  printf_unfiltered ("Can't demangle \"%s\"\n", args);
	}
    }
}

static void
maintenance_time_display (args, from_tty)
     char *args;
     int from_tty;
{
  extern int display_time;

  if (args == NULL || *args == '\0')
    printf_unfiltered ("\"maintenance time\" takes a numeric argument.\n");
  else
    display_time = strtol (args, NULL, 10);
}

static void
maintenance_space_display (args, from_tty)
     char *args;
     int from_tty;
{
  extern int display_space;

  if (args == NULL || *args == '\0')
    printf_unfiltered ("\"maintenance space\" takes a numeric argument.\n");
  else
    display_space = strtol (args, NULL, 10);
}

/* The "maintenance info" command is defined as a prefix, with allow_unknown 0.
   Therefore, its own definition is called only for "maintenance info" with
   no args.  */

/* ARGSUSED */
static void
maintenance_info_command (arg, from_tty)
     char *arg;
     int from_tty;
{
  printf_unfiltered ("\"maintenance info\" must be followed by the name of an info command.\n");
  help_list (maintenanceinfolist, "maintenance info ", -1, gdb_stdout);
}

static void
print_section_table (abfd, asect, ignore)
     bfd *abfd;
     asection *asect;
     PTR ignore;
{
  flagword flags;

  flags = bfd_get_section_flags (abfd, asect);

  /* FIXME-32x64: Need print_address_numeric with field width.  */
  printf_filtered ("    %s",
		   local_hex_string_custom
		     ((unsigned long) bfd_section_vma (abfd, asect), "08l"));
  printf_filtered ("->%s",
		   local_hex_string_custom
		     ((unsigned long) (bfd_section_vma (abfd, asect)
				       + bfd_section_size (abfd, asect)),
		      "08l"));
  printf_filtered (" at %s",
		   local_hex_string_custom
		     ((unsigned long) asect->filepos, "08l"));
  printf_filtered (": %s", bfd_section_name (abfd, asect));

  if (flags & SEC_ALLOC)
    printf_filtered (" ALLOC");
  if (flags & SEC_LOAD)
    printf_filtered (" LOAD");
  if (flags & SEC_RELOC)
    printf_filtered (" RELOC");
  if (flags & SEC_READONLY)
    printf_filtered (" READONLY");
  if (flags & SEC_CODE)
    printf_filtered (" CODE");
  if (flags & SEC_DATA)
    printf_filtered (" DATA");
  if (flags & SEC_ROM)
    printf_filtered (" ROM");
  if (flags & SEC_CONSTRUCTOR)
    printf_filtered (" CONSTRUCTOR");
  if (flags & SEC_HAS_CONTENTS)
    printf_filtered (" HAS_CONTENTS");
  if (flags & SEC_NEVER_LOAD)
    printf_filtered (" NEVER_LOAD");
  if (flags & SEC_COFF_SHARED_LIBRARY)
    printf_filtered (" COFF_SHARED_LIBRARY");
  if (flags & SEC_IS_COMMON)
    printf_filtered (" IS_COMMON");

  printf_filtered ("\n");
}

/* ARGSUSED */
static void
maintenance_info_sections (arg, from_tty)
     char *arg;
     int from_tty;
{
  if (exec_bfd)
    {
      printf_filtered ("Exec file:\n");
      printf_filtered ("    `%s', ", bfd_get_filename(exec_bfd));
      wrap_here ("        ");
      printf_filtered ("file type %s.\n", bfd_get_target(exec_bfd));
      bfd_map_over_sections(exec_bfd, print_section_table, 0);
    }

  if (core_bfd)
    {
      printf_filtered ("Core file:\n");
      printf_filtered ("    `%s', ", bfd_get_filename(core_bfd));
      wrap_here ("        ");
      printf_filtered ("file type %s.\n", bfd_get_target(core_bfd));
      bfd_map_over_sections(core_bfd, print_section_table, 0);
    }
}

/* ARGSUSED */
void
maintenance_print_statistics (args, from_tty)
     char *args;
     int from_tty;
{
  print_objfile_statistics ();
  print_symbol_bcache_statistics ();
}

/* The "maintenance print" command is defined as a prefix, with allow_unknown
   0.  Therefore, its own definition is called only for "maintenance print"
   with no args.  */

/* ARGSUSED */
static void
maintenance_print_command (arg, from_tty)
     char *arg;
     int from_tty;
{
  printf_unfiltered ("\"maintenance print\" must be followed by the name of a print command.\n");
  help_list (maintenanceprintlist, "maintenance print ", -1, gdb_stdout);
}

/* The "maintenance translate-address" command converts a section and address
   to a symbol.  This can be called in two ways:
		maintenance translate-address <secname> <addr>
	or	maintenance translate-address <addr>
*/

static void
maintenance_translate_address (arg, from_tty)
     char *arg;
     int from_tty;
{
  CORE_ADDR address;
  asection *sect;
  char *p;
  struct minimal_symbol *sym;
  struct objfile *objfile;

  if (arg == NULL || *arg == 0)
    error ("requires argument (address or section + address)");

  sect = NULL;
  p = arg;

  if (!isdigit (*p))
    {				/* See if we have a valid section name */
      while (*p && !isspace (*p)) /* Find end of section name */
	p++;
      if (*p == '\000')		/* End of command? */
	error ("Need to specify <section-name> and <address>");
      *p++ = '\000';
      while (isspace (*p)) p++;	/* Skip whitespace */

      ALL_OBJFILES (objfile)
	{
	  sect = bfd_get_section_by_name (objfile->obfd, arg);
	  if (sect != NULL)
	    break;
	}

      if (!sect)
	error ("Unknown section %s.", arg);
    }

  address = parse_and_eval_address (p);

  if (sect)
    sym = lookup_minimal_symbol_by_pc_section (address, sect);
  else
    sym = lookup_minimal_symbol_by_pc (address);

  if (sym)
    printf_filtered ("%s+%u\n", 
		     SYMBOL_SOURCE_NAME (sym), 
		     address - SYMBOL_VALUE_ADDRESS (sym));
  else if (sect)
    printf_filtered ("no symbol at %s:0x%08x\n", sect->name, address);
  else
    printf_filtered ("no symbol at 0x%08x\n", address);

  return;
}

void
_initialize_maint_cmds ()
{
  add_prefix_cmd ("maintenance", class_maintenance, maintenance_command,
		  "Commands for use by GDB maintainers.\n\
Includes commands to dump specific internal GDB structures in\n\
a human readable form, to cause GDB to deliberately dump core,\n\
to test internal functions such as the C++ demangler, etc.",
		  &maintenancelist, "maintenance ", 0,
		  &cmdlist);

  add_com_alias ("mt", "maintenance", class_maintenance, 1);

  add_prefix_cmd ("info", class_maintenance, maintenance_info_command,
		  "Commands for showing internal info about the program being debugged.",
		  &maintenanceinfolist, "maintenance info ", 0,
		  &maintenancelist);

  add_cmd ("sections", class_maintenance, maintenance_info_sections,
	   "List the BFD sections of the exec and core files.",
	   &maintenanceinfolist);

  add_prefix_cmd ("print", class_maintenance, maintenance_print_command,
		  "Maintenance command for printing GDB internal state.",
		  &maintenanceprintlist, "maintenance print ", 0,
		  &maintenancelist);

#ifndef _WIN32
  add_cmd ("dump-me", class_maintenance, maintenance_dump_me,
	   "Get fatal error; make debugger dump its core.\n\
GDB sets it's handling of SIGQUIT back to SIG_DFL and then sends\n\
itself a SIGQUIT signal.",
	   &maintenancelist);
#endif

  add_cmd ("demangle", class_maintenance, maintenance_demangle,
	   "Demangle a C++ mangled name.\n\
Call internal GDB demangler routine to demangle a C++ link name\n\
and prints the result.",
	   &maintenancelist);

  add_cmd ("time", class_maintenance, maintenance_time_display,
	   "Set the display of time usage.\n\
If nonzero, will cause the execution time for each command to be\n\
displayed, following the command's output.",
	   &maintenancelist);

  add_cmd ("space", class_maintenance, maintenance_space_display,
	   "Set the display of space usage.\n\
If nonzero, will cause the execution space for each command to be\n\
displayed, following the command's output.",
	   &maintenancelist);

  add_cmd ("type", class_maintenance, maintenance_print_type,
	   "Print a type chain for a given symbol.\n\
For each node in a type chain, print the raw data for each member of\n\
the type structure, and the interpretation of the data.",
	   &maintenanceprintlist);

  add_cmd ("symbols", class_maintenance, maintenance_print_symbols,
	   "Print dump of current symbol definitions.\n\
Entries in the full symbol table are dumped to file OUTFILE.\n\
If a SOURCE file is specified, dump only that file's symbols.",
	   &maintenanceprintlist);

  add_cmd ("msymbols", class_maintenance, maintenance_print_msymbols,
	   "Print dump of current minimal symbol definitions.\n\
Entries in the minimal symbol table are dumped to file OUTFILE.\n\
If a SOURCE file is specified, dump only that file's minimal symbols.",
	   &maintenanceprintlist);

  add_cmd ("psymbols", class_maintenance, maintenance_print_psymbols,
	   "Print dump of current partial symbol definitions.\n\
Entries in the partial symbol table are dumped to file OUTFILE.\n\
If a SOURCE file is specified, dump only that file's partial symbols.",
	   &maintenanceprintlist);

  add_cmd ("objfiles", class_maintenance, maintenance_print_objfiles,
	   "Print dump of current object file definitions.",
	   &maintenanceprintlist);

  add_cmd ("statistics", class_maintenance, maintenance_print_statistics,
	   "Print statistics about internal gdb state.",
	   &maintenanceprintlist);

  add_cmd ("check-symtabs", class_maintenance, maintenance_check_symtabs,
	   "Check consistency of psymtabs and symtabs.",
	   &maintenancelist);

  add_cmd ("translate-address", class_maintenance, maintenance_translate_address,
	   "Translate a section name and address to a symbol.",
	   &maintenancelist);

  add_show_from_set (
    add_set_cmd ("watchdog", class_maintenance, var_zinteger, (char *)&watchdog,
		 "Set watchdog timer.\n\
When non-zero, this timeout is used instead of waiting forever for a target to\n\
finish a low-level step or continue operation.  If the specified amount of time\n\
passes without a response from the target, an error occurs.", &setlist),
		     &showlist);
}