# Makefile.in generated automatically by automake 1.4 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
AR = @AR@
AS = @AS@
BUILD_DLLTOOL = @BUILD_DLLTOOL@
BUILD_DLLWRAP = @BUILD_DLLWRAP@
BUILD_MISC = @BUILD_MISC@
BUILD_NLMCONV = @BUILD_NLMCONV@
BUILD_SRCONV = @BUILD_SRCONV@
BUILD_WINDRES = @BUILD_WINDRES@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CC_FOR_BUILD = @CC_FOR_BUILD@
CXX = @CXX@
CXXCPP = @CXXCPP@
DATADIRNAME = @DATADIRNAME@
DEMANGLER_NAME = @DEMANGLER_NAME@
DLLTOOL = @DLLTOOL@
DLLTOOL_DEFS = @DLLTOOL_DEFS@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GT_NO = @GT_NO@
GT_YES = @GT_YES@
HDEFINES = @HDEFINES@
INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
INSTOBJEXT = @INSTOBJEXT@
INTLDEPS = @INTLDEPS@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
LEX = @LEX@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
NLMCONV_DEFS = @NLMCONV_DEFS@
OBJDUMP = @OBJDUMP@
OBJDUMP_DEFS = @OBJDUMP_DEFS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
RANLIB = @RANLIB@
STRIP = @STRIP@
UNDERSCORE = @UNDERSCORE@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
YACC = @YACC@
l = @l@

AUTOMAKE_OPTIONS = cygnus

# What version of the manual you want; "all" includes everything
CONFIG = all

# Options to extract the man page from as.texinfo
MANCONF = -Dman

TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl

POD2MAN = pod2man --center="GNU" --release="binutils-$(VERSION)" --section=1

# List of man pages generated from binutils.texi
man_MANS = \
	addr2line.1 \
	ar.1 \
	dlltool.1 \
	nlmconv.1 \
	nm.1 \
	objcopy.1 \
	objdump.1 \
	ranlib.1 \
	readelf.1 \
	size.1 \
	strings.1 \
	strip.1 \
	windres.1 \
	$(DEMANGLER_NAME).1


info_TEXINFOS = binutils.texi

binutils_TEXI = $(srcdir)/binutils.texi

MAINTAINERCLEANFILES = config.texi
DISTCLEANFILES = config.texi
MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES = 
TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
INFO_DEPS = binutils.info
DVIS = binutils.dvi
TEXINFOS = binutils.texi
man1dir = $(mandir)/man1
MANS = $(man_MANS)

NROFF = nroff
DIST_COMMON =  Makefile.am Makefile.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = gtar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
.SUFFIXES: .dvi .info .ps .texi .texinfo .txi
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --cygnus doc/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status


binutils.info: binutils.texi
binutils.dvi: binutils.texi


DVIPS = dvips

.texi.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texi.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.texi:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.txi.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<
.dvi.ps:
	$(DVIPS) $< -o $@

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	    if test -f $$d/$$ifile; then \
	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi

uninstall-info:
	$(PRE_UNINSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  ii=yes; \
	else ii=; fi; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  test -z "$ii" \
	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
	done
	@$(NORMAL_UNINSTALL)
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in `cd $$d && eval echo $$base*`; do \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f binutils.aux binutils.cp binutils.cps binutils.dvi binutils.fn \
	  binutils.fns binutils.ky binutils.kys binutils.ps \
	  binutils.log binutils.pg binutils.toc binutils.tp \
	  binutils.tps binutils.vr binutils.vrs binutils.op binutils.tr \
	  binutils.cv binutils.cn

clean-aminfo:

distclean-aminfo:

maintainer-clean-aminfo:
	for i in $(INFO_DEPS); do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done
clean-info: mostlyclean-aminfo

install-man1:
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
	@list='$(man1_MANS)'; \
	l2='$(man_MANS)'; for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
	done

uninstall-man1:
	@list='$(man1_MANS)'; \
	l2='$(man_MANS)'; for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
	done
install-man: $(MANS)
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-man1
uninstall-man:
	@$(NORMAL_UNINSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-man1
tags: TAGS
TAGS:


distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = doc

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
info-am: $(INFO_DEPS)
info: info-am
dvi-am: $(DVIS)
dvi: dvi-am
check-am:
check: check-am
installcheck-am:
installcheck: installcheck-am
install-info-am: 
install-info: install-info-am
install-exec-am:
install-exec: install-exec-am

install-data-am: install-man
install-data: install-data-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-am
uninstall-am: uninstall-man
uninstall: uninstall-am
all-am: Makefile $(MANS)
all-redirect: all-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs:
	$(mkinstalldirs)  $(DESTDIR)$(mandir)/man1


mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
mostlyclean-am:  mostlyclean-aminfo mostlyclean-generic

mostlyclean: mostlyclean-am

clean-am:  clean-aminfo clean-generic mostlyclean-am

clean: clean-am

distclean-am:  distclean-aminfo distclean-generic clean-am
	-rm -f libtool

distclean: distclean-am

maintainer-clean-am:  maintainer-clean-aminfo maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-am

.PHONY: install-info-am uninstall-info mostlyclean-aminfo \
distclean-aminfo clean-aminfo maintainer-clean-aminfo install-man1 \
uninstall-man1 install-man uninstall-man tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-info-am \
install-info install-exec-am install-exec install-data-am install-data \
install-am install uninstall-am uninstall all-redirect all-am all \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


config.texi: Makefile
	rm -f config.texi
	echo '@set VERSION $(VERSION)' > config.texi

binutils.dvi:  $(binutils_TEXI) config.texi

binutils.info: $(binutils_TEXI) config.texi

# Man page generation from texinfo
addr2line.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Daddr2line < $< > addr2line.pod
	-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f addr2line.pod

ar.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dar < $< > ar.pod
	-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f ar.pod

dlltool.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Ddlltool < $< > dlltool.pod
	-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f dlltool.pod

nlmconv.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dnlmconv < $< > nlmconv.pod
	-($(POD2MAN) nlmconv.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f nlmconv.pod

nm.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dnm < $< > nm.pod
	-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f nm.pod

objcopy.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dobjcopy < $< > objcopy.pod
	-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f objcopy.pod

objdump.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dobjdump < $< > objdump.pod
	-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f objdump.pod

ranlib.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dranlib < $< > ranlib.pod
	-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f ranlib.pod

readelf.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dreadelf < $< > readelf.pod
	-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f readelf.pod

size.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dsize < $< > size.pod
	-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f size.pod

strings.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dstrings < $< > strings.pod
	-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f strings.pod

strip.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dstrip < $< > strip.pod
	-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f strip.pod

windres.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dwindres < $< > windres.pod
	-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f windres.pod

cxxfilt.man:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $< > $(DEMANGLER_NAME).pod
	-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f $(DEMANGLER_NAME).pod

$(DEMANGLER_NAME).1: cxxfilt.man Makefile
	sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
	    -e 's/cxxfilt/$(DEMANGLER_NAME)/' < cxxfilt.man \
		> $(DEMANGLER_NAME).1

# Maintenance

# We need it for the taz target in ../../Makefile.in.
info: $(MANS)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: