gdb/config/z8k/tm-z8k.h - binutils-gdb - Git at Google

 /* Parameters for execution on a z8000 series machine.
    Copyright 1992, 1993, 1994, 1998, 1999, 2000, 2001
    Free Software Foundation, Inc.

    This file is part of GDB.

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330,
    Boston, MA 02111-1307, USA.  */

 #undef TARGET_INT_BIT
 #undef TARGET_LONG_BIT
 #undef TARGET_SHORT_BIT
 #undef TARGET_PTR_BIT

 #define TARGET_SHORT_BIT 16
 #define TARGET_INT_BIT 16
 #define TARGET_LONG_BIT 32
 #define TARGET_PTR_BIT (BIG ? 32: 16)

 /* Offset from address of function to start of its code.
    Zero on most machines.  */

 #define FUNCTION_START_OFFSET 0

 /* Advance PC across any function entry prologue instructions
    to reach some "real" code.  */

 #define SKIP_PROLOGUE(ip)   (z8k_skip_prologue (ip))
 extern CORE_ADDR z8k_skip_prologue (CORE_ADDR ip);


 /* Immediately after a function call, return the saved pc.
    Can't always go through the frames for this because on some machines
    the new frame is not set up until the new function executes
    some instructions.  */


 extern int z8k_saved_pc_after_call (struct frame_info *frame);
 #define SAVED_PC_AFTER_CALL(frame) z8k_saved_pc_after_call(frame)

 /* Stack grows downward.  */

 #define INNER_THAN(lhs,rhs) ((lhs) < (rhs))

 /* Sequence of bytes for breakpoint instruction. */

 #define BREAKPOINT {0x36,0x00}

 /* If your kernel resets the pc after the trap happens you may need to
    define this before including this file.  */

 #define DECR_PC_AFTER_BREAK 0

 /* Say how long registers are.  */

 #define REGISTER_TYPE unsigned int

 #define NUM_REGS 	23	/* 16 registers + 1 ccr + 1 pc + 3 debug
 				   regs + fake fp + fake sp */
 #define REGISTER_BYTES  (NUM_REGS *4)

 /* Index within `registers' of the first byte of the space for
    register N.  */

 #define REGISTER_BYTE(N)  ((N)*4)

 /* Number of bytes of storage in the actual machine representation
    for register N.  On the z8k, all but the pc are 2 bytes, but we
    keep them all as 4 bytes and trim them on I/O */


 #define REGISTER_RAW_SIZE(N) (((N) < 16)? 2:4)

 /* Number of bytes of storage in the program's representation
    for register N.  */

 #define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N)

 /* Largest value REGISTER_RAW_SIZE can have.  */

 #define MAX_REGISTER_RAW_SIZE 4

 /* Largest value REGISTER_VIRTUAL_SIZE can have.  */

 #define MAX_REGISTER_VIRTUAL_SIZE 4

 /* Return the GDB type object for the "standard" data type
    of data in register N.  */

 #define REGISTER_VIRTUAL_TYPE(N) \
  (REGISTER_VIRTUAL_SIZE(N) == 2? builtin_type_unsigned_int : builtin_type_long)

 /*#define INIT_FRAME_PC(x,y) init_frame_pc(x,y) */
 /* Initializer for an array of names of registers.
    Entries beyond the first NUM_REGS are ignored.  */

 #define REGISTER_NAMES  \
  {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
   "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
   "ccr", "pc", "cycles","insts","time","fp","sp"}

 /* Register numbers of various important registers.
    Note that some of these values are "real" register numbers,
    and correspond to the general registers of the machine,
    and some are "phony" register numbers which are too large
    to be actual register numbers as far as the user is concerned
    but do serve to get the desired values when passed to read_register.  */

 #define CCR_REGNUM 	16	/* Contains processor status */
 #define PC_REGNUM 	17	/* Contains program counter */
 #define CYCLES_REGNUM 	18
 #define INSTS_REGNUM 	19
 #define TIME_REGNUM 	20
 #define FP_REGNUM 	21	/* Contains fp, whatever memory model */
 #define SP_REGNUM 	22	/* Conatins sp, whatever memory model */


 #define PTR_SIZE (BIG ? 4: 2)
 #define PTR_MASK (BIG ? 0xff00ffff : 0x0000ffff)

 /* Store the address of the place in which to copy the structure the
    subroutine will return.  This is called from call_function. */

 #define STORE_STRUCT_RETURN(ADDR, SP) internal_error (__FILE__, __LINE__, "failed internal consistency check");

 /* Extract from an array REGBUF containing the (raw) register state
    a function return value of type TYPE, and copy that, in virtual format,
    into VALBUF.  This is assuming that floating point values are returned
    as doubles in d0/d1.  */


 #define DEPRECATED_EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
   memcpy(VALBUF, REGBUF + REGISTER_BYTE(2), TYPE_LENGTH(TYPE));

 /* Write into appropriate registers a function return value
    of type TYPE, given in virtual format. */

 #define DEPRECATED_STORE_RETURN_VALUE(TYPE,VALBUF) internal_error (__FILE__, __LINE__, "failed internal consistency check");

 /* Extract from an array REGBUF containing the (raw) register state
    the address in which a function should return its structure value,
    as a CORE_ADDR (or an expression that can be used as one).  */

 #define DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))

 /* Describe the pointer in each stack frame to the previous stack frame
    (its caller).  */

 /* FRAME_CHAIN takes a frame's nominal address and produces the frame's
    chain-pointer.
    In the case of the Z8000, the frame's nominal address
    is the address of a ptr sized byte word containing the calling
    frame's address.  */

 extern CORE_ADDR z8k_frame_chain (struct frame_info *thisframe);
 #define FRAME_CHAIN(thisframe) z8k_frame_chain(thisframe);


 /* Define other aspects of the stack frame.  */

 /* A macro that tells us whether the function invocation represented
    by FI does not have a frame on the stack associated with it.  If it
    does not, FRAMELESS is set to 1, else 0.  */
 #define FRAMELESS_FUNCTION_INVOCATION(FI) \
   (frameless_look_for_prologue (FI))

 extern CORE_ADDR z8k_frame_saved_pc (struct frame_info *frame);
 #define FRAME_SAVED_PC(FRAME) z8k_frame_saved_pc(FRAME)

 #define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)

 #define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)

 /* Set VAL to the number of args passed to frame described by FI.
    Can set VAL to -1, meaning no way to tell.  */

 /* We can't tell how many args there are
    now that the C compiler delays popping them.  */
 #if !defined (FRAME_NUM_ARGS)
 #define FRAME_NUM_ARGS(fi) (-1)
 #endif

 /* Return number of bytes at start of arglist that are not really args.  */

 #define FRAME_ARGS_SKIP 8

 struct frame_info;
 extern void z8k_frame_init_saved_regs (struct frame_info *);
 #define FRAME_INIT_SAVED_REGS(fi) z8k_frame_init_saved_regs (fi)


 /* Things needed for making the inferior call functions.
    It seems like every m68k based machine has almost identical definitions
    in the individual machine's configuration files.  Most other cpu types
    (mips, i386, etc) have routines in their *-tdep.c files to handle this
    for most configurations.  The m68k family should be able to do this as
    well.  These macros can still be overridden when necessary.  */

 /* The CALL_DUMMY macro is the sequence of instructions, as disassembled
    by gdb itself:

    fmovemx fp0-fp7,sp@-                 0xf227 0xe0ff
    moveml d0-a5,sp@-                    0x48e7 0xfffc
    clrw sp@-                            0x4267
    movew ccr,sp@-                               0x42e7

    /..* The arguments are pushed at this point by GDB;
    no code is needed in the dummy for this.
    The CALL_DUMMY_START_OFFSET gives the position of
    the following jsr instruction.  *../

    jsr @#0x32323232                     0x4eb9 0x3232 0x3232
    addal #0x69696969,sp                 0xdffc 0x6969 0x6969
    trap #<your BPT_VECTOR number here>  0x4e4?
    nop                                  0x4e71

    Note this is CALL_DUMMY_LENGTH bytes (28 for the above example).
    We actually start executing at the jsr, since the pushing of the
    registers is done by PUSH_DUMMY_FRAME.  If this were real code,
    the arguments for the function called by the jsr would be pushed
    between the moveml and the jsr, and we could allow it to execute through.
    But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is
    done, and we cannot allow the moveml to push the registers again lest
    they be taken for the arguments.  */


 #define CALL_DUMMY { 0 }
 #define CALL_DUMMY_LENGTH 24	/* Size of CALL_DUMMY */
 #define CALL_DUMMY_START_OFFSET 8	/* Offset to jsr instruction */


 /* Insert the specified number of args and function address
    into a call sequence of the above form stored at DUMMYNAME.
    We use the BFD routines to store a big-endian value of known size.  */

 #define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)     \
 { bfd_putb32 (fun,     (char *) dummyname + CALL_DUMMY_START_OFFSET + 2);  \
   bfd_putb32 (nargs*4, (char *) dummyname + CALL_DUMMY_START_OFFSET + 8); }

 /* Push an empty stack frame, to record the current PC, etc.  */

 #define PUSH_DUMMY_FRAME	{ z8k_push_dummy_frame (); }

 extern void z8k_push_dummy_frame (void);

 extern void z8k_pop_frame (void);

 /* Discard from the stack the innermost frame, restoring all registers.  */

 #define POP_FRAME		{ z8k_pop_frame (); }

 /* Offset from SP to first arg on stack at first instruction of a function */

 #define SP_ARG0 (1 * 4)

 extern CORE_ADDR z8k_addr_bits_remove (CORE_ADDR);
 #define ADDR_BITS_REMOVE(addr) z8k_addr_bits_remove (addr)
 int sim_z8001_mode;
 #define BIG (sim_z8001_mode)

 #define read_memory_short(x)  (read_memory_integer(x,2) & 0xffff)

 #define NO_STD_REGS

 extern void z8k_print_register_hook (int regno);
 #define	PRINT_REGISTER_HOOK(regno) z8k_print_register_hook(regno)


 extern void z8k_set_pointer_size (int newsize);
 #define INIT_EXTRA_SYMTAB_INFO \
   z8k_set_pointer_size(objfile->obfd->arch_info->bits_per_address);

 #define REGISTER_SIZE 4
	/* Parameters for execution on a z8000 series machine.
	Copyright 1992, 1993, 1994, 1998, 1999, 2000, 2001
	Free Software Foundation, Inc.

	This file is part of GDB.

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 59 Temple Place - Suite 330,
	Boston, MA 02111-1307, USA. */

	#undef TARGET_INT_BIT
	#undef TARGET_LONG_BIT
	#undef TARGET_SHORT_BIT
	#undef TARGET_PTR_BIT

	#define TARGET_SHORT_BIT 16
	#define TARGET_INT_BIT 16
	#define TARGET_LONG_BIT 32
	#define TARGET_PTR_BIT (BIG ? 32: 16)

	/* Offset from address of function to start of its code.
	Zero on most machines. */

	#define FUNCTION_START_OFFSET 0

	/* Advance PC across any function entry prologue instructions
	to reach some "real" code. */

	#define SKIP_PROLOGUE(ip) (z8k_skip_prologue (ip))
	extern CORE_ADDR z8k_skip_prologue (CORE_ADDR ip);


	/* Immediately after a function call, return the saved pc.
	Can't always go through the frames for this because on some machines
	the new frame is not set up until the new function executes
	some instructions. */


	extern int z8k_saved_pc_after_call (struct frame_info *frame);
	#define SAVED_PC_AFTER_CALL(frame) z8k_saved_pc_after_call(frame)

	/* Stack grows downward. */

	#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))

	/* Sequence of bytes for breakpoint instruction. */

	#define BREAKPOINT {0x36,0x00}

	/* If your kernel resets the pc after the trap happens you may need to
	define this before including this file. */

	#define DECR_PC_AFTER_BREAK 0

	/* Say how long registers are. */

	#define REGISTER_TYPE unsigned int

	#define NUM_REGS 23 /* 16 registers + 1 ccr + 1 pc + 3 debug
	regs + fake fp + fake sp */
	#define REGISTER_BYTES (NUM_REGS *4)

	/* Index within `registers' of the first byte of the space for
	register N. */

	#define REGISTER_BYTE(N) ((N)*4)

	/* Number of bytes of storage in the actual machine representation
	for register N. On the z8k, all but the pc are 2 bytes, but we
	keep them all as 4 bytes and trim them on I/O */


	#define REGISTER_RAW_SIZE(N) (((N) < 16)? 2:4)

	/* Number of bytes of storage in the program's representation
	for register N. */

	#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N)

	/* Largest value REGISTER_RAW_SIZE can have. */

	#define MAX_REGISTER_RAW_SIZE 4

	/* Largest value REGISTER_VIRTUAL_SIZE can have. */

	#define MAX_REGISTER_VIRTUAL_SIZE 4

	/* Return the GDB type object for the "standard" data type
	of data in register N. */

	#define REGISTER_VIRTUAL_TYPE(N) \
	(REGISTER_VIRTUAL_SIZE(N) == 2? builtin_type_unsigned_int : builtin_type_long)

	/#define INIT_FRAME_PC(x,y) init_frame_pc(x,y) /
	/* Initializer for an array of names of registers.
	Entries beyond the first NUM_REGS are ignored. */

	#define REGISTER_NAMES \
	{"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
	"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
	"ccr", "pc", "cycles","insts","time","fp","sp"}

	/* Register numbers of various important registers.
	Note that some of these values are "real" register numbers,
	and correspond to the general registers of the machine,
	and some are "phony" register numbers which are too large
	to be actual register numbers as far as the user is concerned
	but do serve to get the desired values when passed to read_register. */

	#define CCR_REGNUM 16 /* Contains processor status */
	#define PC_REGNUM 17 /* Contains program counter */
	#define CYCLES_REGNUM 18
	#define INSTS_REGNUM 19
	#define TIME_REGNUM 20
	#define FP_REGNUM 21 /* Contains fp, whatever memory model */
	#define SP_REGNUM 22 /* Conatins sp, whatever memory model */



	#define PTR_SIZE (BIG ? 4: 2)
	#define PTR_MASK (BIG ? 0xff00ffff : 0x0000ffff)

	/* Store the address of the place in which to copy the structure the
	subroutine will return. This is called from call_function. */

	#define STORE_STRUCT_RETURN(ADDR, SP) internal_error (__FILE__, __LINE__, "failed internal consistency check");

	/* Extract from an array REGBUF containing the (raw) register state
	a function return value of type TYPE, and copy that, in virtual format,
	into VALBUF. This is assuming that floating point values are returned
	as doubles in d0/d1. */


	#define DEPRECATED_EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
	memcpy(VALBUF, REGBUF + REGISTER_BYTE(2), TYPE_LENGTH(TYPE));

	/* Write into appropriate registers a function return value
	of type TYPE, given in virtual format. */

	#define DEPRECATED_STORE_RETURN_VALUE(TYPE,VALBUF) internal_error (__FILE__, __LINE__, "failed internal consistency check");

	/* Extract from an array REGBUF containing the (raw) register state
	the address in which a function should return its structure value,
	as a CORE_ADDR (or an expression that can be used as one). */

	#define DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) ((CORE_ADDR )(REGBUF))

	/* Describe the pointer in each stack frame to the previous stack frame
	(its caller). */

	/* FRAME_CHAIN takes a frame's nominal address and produces the frame's
	chain-pointer.
	In the case of the Z8000, the frame's nominal address
	is the address of a ptr sized byte word containing the calling
	frame's address. */

	extern CORE_ADDR z8k_frame_chain (struct frame_info *thisframe);
	#define FRAME_CHAIN(thisframe) z8k_frame_chain(thisframe);



	/* Define other aspects of the stack frame. */

	/* A macro that tells us whether the function invocation represented
	by FI does not have a frame on the stack associated with it. If it
	does not, FRAMELESS is set to 1, else 0. */
	#define FRAMELESS_FUNCTION_INVOCATION(FI) \
	(frameless_look_for_prologue (FI))

	extern CORE_ADDR z8k_frame_saved_pc (struct frame_info *frame);
	#define FRAME_SAVED_PC(FRAME) z8k_frame_saved_pc(FRAME)

	#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)

	#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)

	/* Set VAL to the number of args passed to frame described by FI.
	Can set VAL to -1, meaning no way to tell. */

	/* We can't tell how many args there are
	now that the C compiler delays popping them. */
	#if !defined (FRAME_NUM_ARGS)
	#define FRAME_NUM_ARGS(fi) (-1)
	#endif

	/* Return number of bytes at start of arglist that are not really args. */

	#define FRAME_ARGS_SKIP 8

	struct frame_info;
	extern void z8k_frame_init_saved_regs (struct frame_info *);
	#define FRAME_INIT_SAVED_REGS(fi) z8k_frame_init_saved_regs (fi)


	/* Things needed for making the inferior call functions.
	It seems like every m68k based machine has almost identical definitions
	in the individual machine's configuration files. Most other cpu types
	(mips, i386, etc) have routines in their *-tdep.c files to handle this
	for most configurations. The m68k family should be able to do this as
	well. These macros can still be overridden when necessary. */

	/* The CALL_DUMMY macro is the sequence of instructions, as disassembled
	by gdb itself:

	fmovemx fp0-fp7,sp@- 0xf227 0xe0ff
	moveml d0-a5,sp@- 0x48e7 0xfffc
	clrw sp@- 0x4267
	movew ccr,sp@- 0x42e7

	/..* The arguments are pushed at this point by GDB;
	no code is needed in the dummy for this.
	The CALL_DUMMY_START_OFFSET gives the position of
	the following jsr instruction. *../

	jsr @#0x32323232 0x4eb9 0x3232 0x3232
	addal #0x69696969,sp 0xdffc 0x6969 0x6969
	trap #<your BPT_VECTOR number here> 0x4e4?
	nop 0x4e71

	Note this is CALL_DUMMY_LENGTH bytes (28 for the above example).
	We actually start executing at the jsr, since the pushing of the
	registers is done by PUSH_DUMMY_FRAME. If this were real code,
	the arguments for the function called by the jsr would be pushed
	between the moveml and the jsr, and we could allow it to execute through.
	But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is
	done, and we cannot allow the moveml to push the registers again lest
	they be taken for the arguments. */


	#define CALL_DUMMY { 0 }
	#define CALL_DUMMY_LENGTH 24 /* Size of CALL_DUMMY */
	#define CALL_DUMMY_START_OFFSET 8 /* Offset to jsr instruction */


	/* Insert the specified number of args and function address
	into a call sequence of the above form stored at DUMMYNAME.
	We use the BFD routines to store a big-endian value of known size. */

	#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
	{ bfd_putb32 (fun, (char *) dummyname + CALL_DUMMY_START_OFFSET + 2); \
	bfd_putb32 (nargs4, (char ) dummyname + CALL_DUMMY_START_OFFSET + 8); }

	/* Push an empty stack frame, to record the current PC, etc. */

	#define PUSH_DUMMY_FRAME { z8k_push_dummy_frame (); }

	extern void z8k_push_dummy_frame (void);

	extern void z8k_pop_frame (void);

	/* Discard from the stack the innermost frame, restoring all registers. */

	#define POP_FRAME { z8k_pop_frame (); }

	/* Offset from SP to first arg on stack at first instruction of a function */

	#define SP_ARG0 (1 * 4)

	extern CORE_ADDR z8k_addr_bits_remove (CORE_ADDR);
	#define ADDR_BITS_REMOVE(addr) z8k_addr_bits_remove (addr)
	int sim_z8001_mode;
	#define BIG (sim_z8001_mode)

	#define read_memory_short(x) (read_memory_integer(x,2) & 0xffff)

	#define NO_STD_REGS

	extern void z8k_print_register_hook (int regno);
	#define PRINT_REGISTER_HOOK(regno) z8k_print_register_hook(regno)


	extern void z8k_set_pointer_size (int newsize);
	#define INIT_EXTRA_SYMTAB_INFO \
	z8k_set_pointer_size(objfile->obfd->arch_info->bits_per_address);

	#define REGISTER_SIZE 4