blob: 849566bd8b670bf87df550fe0a18c3eca552e387 [file] [log] [blame]
/* Definitions for dealing with stack frames, for GDB, the GNU debugger.
Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1996,
1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#if !defined (FRAME_H)
#define FRAME_H 1
/* Return the location (and possibly value) of REGNUM for the previous
(older, up) frame. All parameters except VALUEP can be assumed to
be non NULL. When VALUEP is NULL, just the location of the
register should be returned.
UNWIND_CACHE is provided as mechanism for implementing a per-frame
local cache. It's initial value being NULL. Memory for that cache
should be allocated using frame_obstack_alloc().
Register window architectures (eg SPARC) should note that REGNUM
identifies the register for the previous frame. For instance, a
request for the value of "o1" for the previous frame would be found
in the register "i1" in this FRAME. */
typedef void (frame_register_unwind_ftype) (struct frame_info *frame,
void **unwind_cache,
int regnum,
int *optimized,
enum lval_type *lvalp,
CORE_ADDR *addrp,
int *realnump,
void *valuep);
/* Describe the saved registers of a frame. */
#if defined (EXTRA_FRAME_INFO) || defined (FRAME_FIND_SAVED_REGS)
/* XXXX - deprecated */
struct frame_saved_regs
{
/* For each register R (except the SP), regs[R] is the address at
which it was saved on entry to the frame, or zero if it was not
saved on entry to this frame. This includes special registers
such as pc and fp saved in special ways in the stack frame.
regs[SP_REGNUM] is different. It holds the actual SP, not the
address at which it was saved. */
CORE_ADDR regs[NUM_REGS];
};
#endif
/* We keep a cache of stack frames, each of which is a "struct
frame_info". The innermost one gets allocated (in
wait_for_inferior) each time the inferior stops; current_frame
points to it. Additional frames get allocated (in
get_prev_frame) as needed, and are chained through the next
and prev fields. Any time that the frame cache becomes invalid
(most notably when we execute something, but also if we change how
we interpret the frames (e.g. "set heuristic-fence-post" in
mips-tdep.c, or anything which reads new symbols)), we should call
reinit_frame_cache. */
struct frame_info
{
/* Nominal address of the frame described. See comments at FRAME_FP
about what this means outside the *FRAME* macros; in the *FRAME*
macros, it can mean whatever makes most sense for this machine. */
CORE_ADDR frame;
/* Address at which execution is occurring in this frame.
For the innermost frame, it's the current pc.
For other frames, it is a pc saved in the next frame. */
CORE_ADDR pc;
/* Level of this frame. The inner-most (youngest) frame is at
level 0. As you move towards the outer-most (oldest) frame,
the level increases. This is a cached value. It could just as
easily be computed by counting back from the selected frame to
the inner most frame. */
/* NOTE: cagney/2002-04-05: Perhaphs a level of ``-1'' should be
reserved to indicate a bogus frame - one that has been created
just to keep GDB happy (GDB always needs a frame). For the
moment leave this as speculation. */
int level;
/* Nonzero if this is a frame associated with calling a signal handler.
Set by machine-dependent code. On some machines, if
the machine-dependent code fails to check for this, the backtrace
will look relatively normal. For example, on the i386
#3 0x158728 in sighold ()
On other machines (e.g. rs6000), the machine-dependent code better
set this to prevent us from trying to print it like a normal frame. */
int signal_handler_caller;
/* For each register, address of where it was saved on entry to
the frame, or zero if it was not saved on entry to this frame.
This includes special registers such as pc and fp saved in
special ways in the stack frame. The SP_REGNUM is even more
special, the address here is the sp for the previous frame, not
the address where the sp was saved. */
/* Allocated by frame_saved_regs_zalloc () which is called /
initialized by FRAME_INIT_SAVED_REGS(). */
CORE_ADDR *saved_regs; /*NUM_REGS + NUM_PSEUDO_REGS*/
#ifdef EXTRA_FRAME_INFO
/* XXXX - deprecated */
/* Anything extra for this structure that may have been defined
in the machine dependent files. */
EXTRA_FRAME_INFO
#endif
/* Anything extra for this structure that may have been defined
in the machine dependent files. */
/* Allocated by frame_obstack_alloc () which is called /
initialized by INIT_EXTRA_FRAME_INFO */
struct frame_extra_info *extra_info;
/* If dwarf2 unwind frame informations is used, this structure holds all
related unwind data. */
struct context *context;
/* See description above. Return the register value for the
previous frame. */
frame_register_unwind_ftype *register_unwind;
void *register_unwind_cache;
/* Pointers to the next (down, inner) and previous (up, outer)
frame_info's in the frame cache. */
struct frame_info *next; /* down, inner */
struct frame_info *prev; /* up, outer */
};
/* Values for the source flag to be used in print_frame_info_base(). */
enum print_what
{
/* Print only the source line, like in stepi. */
SRC_LINE = -1,
/* Print only the location, i.e. level, address (sometimes)
function, args, file, line, line num. */
LOCATION,
/* Print both of the above. */
SRC_AND_LOC,
/* Print location only, but always include the address. */
LOC_AND_ADDRESS
};
/* Allocate additional space for appendices to a struct frame_info.
NOTE: Much of GDB's code works on the assumption that the allocated
saved_regs[] array is the size specified below. If you try to make
that array smaller, GDB will happily walk off its end. */
#ifdef SIZEOF_FRAME_SAVED_REGS
#error "SIZEOF_FRAME_SAVED_REGS can not be re-defined"
#endif
#define SIZEOF_FRAME_SAVED_REGS \
(sizeof (CORE_ADDR) * (NUM_REGS+NUM_PSEUDO_REGS))
extern void *frame_obstack_alloc (unsigned long size);
extern void frame_saved_regs_zalloc (struct frame_info *);
/* Return the frame address from FI. Except in the machine-dependent
*FRAME* macros, a frame address has no defined meaning other than
as a magic cookie which identifies a frame over calls to the
inferior. The only known exception is inferior.h
(PC_IN_CALL_DUMMY) [ON_STACK]; see comments there. You cannot
assume that a frame address contains enough information to
reconstruct the frame; if you want more than just to identify the
frame (e.g. be able to fetch variables relative to that frame),
then save the whole struct frame_info (and the next struct
frame_info, since the latter is used for fetching variables on some
machines). */
#define FRAME_FP(fi) ((fi)->frame)
/* Level of the frame: 0 for innermost, 1 for its caller, ...; or -1
for an invalid frame. */
extern int frame_relative_level (struct frame_info *fi);
/* Define a default FRAME_CHAIN_VALID, in the form that is suitable for most
targets. If FRAME_CHAIN_VALID returns zero it means that the given frame
is the outermost one and has no caller.
XXXX - both default and alternate frame_chain_valid functions are
deprecated. New code should use dummy frames and one of the
generic functions. */
extern int file_frame_chain_valid (CORE_ADDR, struct frame_info *);
extern int func_frame_chain_valid (CORE_ADDR, struct frame_info *);
extern int nonnull_frame_chain_valid (CORE_ADDR, struct frame_info *);
extern int generic_file_frame_chain_valid (CORE_ADDR, struct frame_info *);
extern int generic_func_frame_chain_valid (CORE_ADDR, struct frame_info *);
extern void generic_save_dummy_frame_tos (CORE_ADDR sp);
/* The stack frame that the user has specified for commands to act on.
Note that one cannot assume this is the address of valid data. */
extern struct frame_info *selected_frame;
/* Level of the selected frame:
0 for innermost, 1 for its caller, ...
or -1 for frame specified by address with no defined level. */
extern struct frame_info *create_new_frame (CORE_ADDR, CORE_ADDR);
extern void flush_cached_frames (void);
extern void reinit_frame_cache (void);
#ifdef FRAME_FIND_SAVED_REGS
/* XXX - deprecated */
#define FRAME_INIT_SAVED_REGS(FI) get_frame_saved_regs (FI, NULL)
extern void get_frame_saved_regs (struct frame_info *,
struct frame_saved_regs *);
#endif
extern void set_current_frame (struct frame_info *);
extern struct frame_info *get_prev_frame (struct frame_info *);
extern struct frame_info *get_current_frame (void);
extern struct frame_info *get_next_frame (struct frame_info *);
extern struct block *get_frame_block (struct frame_info *,
CORE_ADDR *addr_in_block);
extern struct block *get_current_block (CORE_ADDR *addr_in_block);
extern struct block *get_selected_block (CORE_ADDR *addr_in_block);
extern struct symbol *get_frame_function (struct frame_info *);
extern CORE_ADDR get_frame_pc (struct frame_info *);
extern CORE_ADDR frame_address_in_block (struct frame_info *);
extern CORE_ADDR get_pc_function_start (CORE_ADDR);
extern struct block *block_for_pc (CORE_ADDR);
extern struct block *block_for_pc_sect (CORE_ADDR, asection *);
extern int frameless_look_for_prologue (struct frame_info *);
extern void print_frame_args (struct symbol *, struct frame_info *,
int, struct ui_file *);
extern struct frame_info *find_relative_frame (struct frame_info *, int *);
extern void show_and_print_stack_frame (struct frame_info *fi, int level,
int source);
extern void print_stack_frame (struct frame_info *, int, int);
extern void print_only_stack_frame (struct frame_info *, int, int);
extern void show_stack_frame (struct frame_info *);
extern void select_frame (struct frame_info *);
/* Return an ID that can be used to re-find a frame. */
struct frame_id
{
/* The frame's address. This should be constant through out the
lifetime of a frame. */
CORE_ADDR base;
/* The frame's current PC. While this changes, the function that
the PC falls into, does not. */
CORE_ADDR pc;
};
extern void get_frame_id (struct frame_info *fi, struct frame_id *id);
extern struct frame_info *frame_find_by_id (struct frame_id id);
extern void print_frame_info (struct frame_info *, int, int, int);
extern void show_frame_info (struct frame_info *, int, int, int);
extern struct frame_info *block_innermost_frame (struct block *);
extern struct frame_info *find_frame_addr_in_frame_chain (CORE_ADDR);
extern CORE_ADDR sigtramp_saved_pc (struct frame_info *);
/* NOTE: cagney/2002-09-13: There is no need for this function.
Instead either of frame_unwind_signed_register() or
frame_unwind_unsigned_register() can be used. */
extern CORE_ADDR deprecated_read_register_dummy (CORE_ADDR pc,
CORE_ADDR fp, int);
extern void generic_push_dummy_frame (void);
extern void generic_pop_current_frame (void (*)(struct frame_info *));
extern void generic_pop_dummy_frame (void);
extern int generic_pc_in_call_dummy (CORE_ADDR pc,
CORE_ADDR sp, CORE_ADDR fp);
/* NOTE: cagney/2002-06-26: Targets should no longer use this
function. Instead, the contents of a dummy frames registers can be
obtained by applying: frame_register_unwind to the dummy frame; or
get_saved_register to the next outer frame. */
extern char *deprecated_generic_find_dummy_frame (CORE_ADDR pc, CORE_ADDR fp);
extern void generic_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun,
int nargs, struct value **args,
struct type *type, int gcc_p);
extern void generic_get_saved_register (char *, int *, CORE_ADDR *,
struct frame_info *, int,
enum lval_type *);
extern void generic_unwind_get_saved_register (char *raw_buffer,
int *optimized,
CORE_ADDR * addrp,
struct frame_info *frame,
int regnum,
enum lval_type *lval);
/* Unwind the stack frame so that the value of REGNUM, in the previous
frame is returned. If VALUEP is NULL, don't fetch/compute the
value. Instead just return the location of the value. */
extern void frame_register_unwind (struct frame_info *frame, int regnum,
int *optimizedp, enum lval_type *lvalp,
CORE_ADDR *addrp, int *realnump,
void *valuep);
/* Unwind FRAME so that the value of register REGNUM, in the previous
frame is returned. Simplified versions of frame_register_unwind. */
/* NOTE: cagney/2002-09-13: Return void as one day these functions may
be changed to return an indication that the read succeeded. */
extern void frame_unwind_signed_register (struct frame_info *frame,
int regnum, LONGEST *val);
extern void frame_unwind_unsigned_register (struct frame_info *frame,
int regnum, ULONGEST *val);
extern void generic_save_call_dummy_addr (CORE_ADDR lo, CORE_ADDR hi);
extern void get_saved_register (char *raw_buffer, int *optimized,
CORE_ADDR * addrp,
struct frame_info *frame,
int regnum, enum lval_type *lval);
/* Return the register as found on the FRAME. Return zero if the
register could not be found. */
extern int frame_register_read (struct frame_info *frame, int regnum,
void *buf);
/* Map between a frame register number and its name. A frame register
space is a superset of the cooked register space --- it also
includes builtin registers. */
extern int frame_map_name_to_regnum (const char *name, int strlen);
extern const char *frame_map_regnum_to_name (int regnum);
/* From stack.c. */
extern void args_info (char *, int);
extern void locals_info (char *, int);
extern void (*selected_frame_level_changed_hook) (int);
extern void return_command (char *, int);
#endif /* !defined (FRAME_H) */