| # Copyright 1997, 1998, 1999 Free Software Foundation, Inc. |
| |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| global usestubs |
| |
| # |
| # test running programs |
| # |
| set prms_id 0 |
| set bug_id 0 |
| |
| set testfile "break" |
| set srcfile ${testfile}.c |
| set binfile ${objdir}/${subdir}/${testfile} |
| |
| if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { |
| gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." |
| } |
| |
| gdb_exit |
| gdb_start |
| gdb_reinitialize_dir $srcdir/$subdir |
| gdb_load ${binfile} |
| |
| if ![runto_main] then { fail "enable/disable break tests suppressed" } |
| |
| # Verify that we can set a breakpoint (the location is irrelevant), |
| # then enable it (yes, it's already enabled by default), then hit it. |
| # |
| send_gdb "break marker1\n" |
| gdb_expect { |
| -re "Breakpoint (\[0-9\]*) at .*, line 4\[38\].*$gdb_prompt $"\ |
| {pass "break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "break marker1"} |
| timeout {fail "(timeout) break marker1"} |
| } |
| |
| send_gdb "enable $expect_out(1,string)\n" |
| gdb_expect { |
| -re "$gdb_prompt $"\ |
| {pass "enable break marker1"} |
| timeout {fail "(timeout) enable break marker1"} |
| } |
| |
| send_gdb "info break $expect_out(1,string)\n" |
| gdb_expect { |
| -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+y.*$gdb_prompt $"\ |
| {pass "info break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "info break marker1"} |
| timeout {fail "(timeout) info break marker1"} |
| } |
| |
| # See the comments in condbreak.exp for "run until breakpoint at marker1" |
| # for an explanation of the xfail below. |
| send_gdb "continue\n" |
| gdb_expect { |
| -re "Breakpoint \[0-9\]*, marker1.*$gdb_prompt $"\ |
| {pass "continue to break marker1"} |
| -re "Breakpoint \[0-9\]*, $hex in marker1.*$gdb_prompt $"\ |
| {xfail "continue to break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "continue to break marker1"} |
| timeout {fail "(timeout) continue to break marker1"} |
| } |
| |
| send_gdb "delete $expect_out(1,string)\n" |
| gdb_expect { |
| -re "$gdb_prompt $"\ |
| {pass "delete break marker1"} |
| timeout {fail "(timeout) delete break marker1"} |
| } |
| |
| # Verify that we can set a breakpoint to be self-disabling after |
| # the first time it triggers. |
| # |
| send_gdb "break marker2\n" |
| gdb_expect { |
| -re "Breakpoint (\[0-9\]*) at .*, line 4\[49\].*$gdb_prompt $"\ |
| {pass "break marker2"} |
| -re "$gdb_prompt $"\ |
| {fail "break marker2"} |
| timeout {fail "(timeout) break marker2"} |
| } |
| |
| send_gdb "enable once $expect_out(1,string)\n" |
| gdb_expect { |
| -re "$gdb_prompt $"\ |
| {pass "enable once break marker2"} |
| timeout {fail "(timeout) enable once break marker2"} |
| } |
| |
| send_gdb "info break $expect_out(1,string)\n" |
| gdb_expect { |
| -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+dis\[ \t\]+y.*$gdb_prompt $"\ |
| {pass "info auto-disabled break marker2"} |
| -re "$gdb_prompt $"\ |
| {fail "info auto-disabled break marker2"} |
| timeout {fail "(timeout) info auto-disabled break marker2"} |
| } |
| |
| # See the comments in condbreak.exp for "run until breakpoint at marker1" |
| # for an explanation of the xfail below. |
| send_gdb "continue\n" |
| gdb_expect { |
| -re "Breakpoint \[0-9\]*, marker2.*$gdb_prompt $"\ |
| {pass "continue to auto-disabled break marker2"} |
| -re "Breakpoint \[0-9\]*, $hex in marker2.*$gdb_prompt $"\ |
| {xfail "continue to auto-disabled break marker2"} |
| -re "$gdb_prompt $"\ |
| {fail "continue to auto-disabled break marker2"} |
| timeout {fail "(timeout) continue to auto-disabled break marker2"} |
| } |
| |
| send_gdb "info break $expect_out(1,string)\n" |
| gdb_expect { |
| -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+dis\[ \t\]+n.*$gdb_prompt $"\ |
| {pass "info auto-disabled break marker2"} |
| -re "$gdb_prompt $"\ |
| {fail "info auto-disabled break marker2"} |
| timeout {fail "(timeout) info auto-disabled break marker2"} |
| } |
| |
| # Verify that we don't stop at a disabled breakpoint. |
| # |
| gdb_continue_to_end "no stop" |
| rerun_to_main |
| gdb_continue_to_end "no stop at auto-disabled break marker2" |
| |
| # Verify that we can set a breakpoint to be self-deleting after |
| # the first time it triggers. |
| # |
| if ![runto_main] then { fail "enable/disable break tests suppressed" } |
| |
| send_gdb "break marker3\n" |
| gdb_expect { |
| -re "Breakpoint (\[0-9\]*) at .*, line (45|50).*$gdb_prompt $"\ |
| {pass "break marker3"} |
| -re "$gdb_prompt $"\ |
| {fail "break marker3"} |
| timeout {fail "(timeout) break marker3"} |
| } |
| |
| send_gdb "enable del $expect_out(1,string)\n" |
| gdb_expect { |
| -re "$gdb_prompt $"\ |
| {pass "enable del break marker3"} |
| timeout {fail "(timeout) enable del break marker3"} |
| } |
| |
| send_gdb "info break $expect_out(1,string)\n" |
| gdb_expect { |
| -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+del\[ \t\]+y.*$gdb_prompt $"\ |
| {pass "info auto-deleted break marker2"} |
| -re "$gdb_prompt $"\ |
| {fail "info auto-deleted break marker2"} |
| timeout {fail "(timeout) info auto-deleted break marker2"} |
| } |
| |
| send_gdb "continue\n" |
| gdb_expect { |
| -re ".*marker3 .*:(45|50).*$gdb_prompt $"\ |
| {pass "continue to auto-deleted break marker3"} |
| -re "Breakpoint \[0-9\]*, marker3.*$gdb_prompt $"\ |
| {fail "continue to auto-deleted break marker3"} |
| -re "$gdb_prompt $"\ |
| {fail "continue to auto-deleted break marker3"} |
| timeout {fail "(timeout) continue to break marker3"} |
| } |
| |
| send_gdb "info break $expect_out(1,string)\n" |
| gdb_expect { |
| -re ".*No breakpoint or watchpoint number.*$gdb_prompt $"\ |
| {pass "info auto-deleted break marker3"} |
| -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\].*$gdb_prompt $"\ |
| {fail "info auto-deleted break marker3"} |
| -re "$gdb_prompt $"\ |
| {fail "info auto-deleted break marker3"} |
| timeout {fail "(timeout) info auto-deleted break marker3"} |
| } |
| |
| # Verify that we can set a breakpoint and manually disable it (we've |
| # already proven that disabled bp's don't trigger). |
| # |
| send_gdb "break marker4\n" |
| gdb_expect { |
| -re "Breakpoint (\[0-9\]*) at .*, line (46|51).*$gdb_prompt $"\ |
| {pass "break marker4"} |
| -re "$gdb_prompt $"\ |
| {fail "break marker4"} |
| timeout {fail "(timeout) break marker4"} |
| } |
| |
| send_gdb "disable $expect_out(1,string)\n" |
| gdb_expect { |
| -re "$gdb_prompt $"\ |
| {pass "disable break marker4"} |
| timeout {fail "(timeout) disable break marker4"} |
| } |
| |
| send_gdb "info break $expect_out(1,string)\n" |
| gdb_expect { |
| -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+n.*$gdb_prompt $"\ |
| {pass "info break marker4"} |
| -re "$gdb_prompt $"\ |
| {fail "info break marker4"} |
| timeout {fail "(timeout) info break marker4"} |
| } |
| |
| # Verify that we can set a breakpoint with an ignore count N, which |
| # should cause the next N triggers of the bp to be ignored. (This is |
| # a flavor of enablement/disablement, after all.) |
| # |
| if ![runto_main] then { fail "enable/disable break tests suppressed" } |
| |
| send_gdb "break marker1\n" |
| gdb_expect { |
| -re "Breakpoint (\[0-9\]*) at .*, line 4\[38\].*$gdb_prompt $"\ |
| {pass "break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "break marker1"} |
| timeout {fail "(timeout) break marker1"} |
| } |
| |
| # Verify that an ignore of a non-existent breakpoint is gracefully |
| # handled. |
| # |
| send_gdb "ignore 999 2\n" |
| gdb_expect { |
| -re "No breakpoint number 999..*$gdb_prompt $"\ |
| {pass "ignore non-existent break"} |
| -re "$gdb_prompt $"\ |
| {fail "ignore non-existent break"} |
| timeout {fail "(timeout) ignore non-existent break"} |
| } |
| |
| # Verify that a missing ignore count is gracefully handled. |
| # |
| send_gdb "ignore $expect_out(1,string) \n" |
| gdb_expect { |
| -re "Second argument .specified ignore-count. is missing..*$gdb_prompt $"\ |
| {pass "ignore break with missing ignore count"} |
| -re "$gdb_prompt $"\ |
| {fail "ignore break with missing ignore count"} |
| timeout {fail "(timeout) ignore break with missing ignore count"} |
| } |
| |
| # Verify that a negative or zero ignore count is handled gracefully |
| # (they both are treated the same). |
| # |
| send_gdb "ignore $expect_out(1,string) -1\n" |
| gdb_expect { |
| -re "Will stop next time breakpoint \[0-9\]* is reached..*$gdb_prompt $"\ |
| {pass "ignore break marker1 -1"} |
| -re "$gdb_prompt $"\ |
| {fail "ignore break marker1 -1"} |
| timeout {fail "(timeout) ignore break marker1 -1"} |
| } |
| |
| send_gdb "ignore $expect_out(1,string) 0\n" |
| gdb_expect { |
| -re "Will stop next time breakpoint \[0-9\]* is reached..*$gdb_prompt $"\ |
| {pass "ignore break marker1 0"} |
| -re "$gdb_prompt $"\ |
| {fail "ignore break marker1 0"} |
| timeout {fail "(timeout) ignore break marker1 0"} |
| } |
| |
| send_gdb "ignore $expect_out(1,string) 1\n" |
| gdb_expect { |
| -re "Will ignore next crossing of breakpoint \[0-9\]*.*$gdb_prompt $"\ |
| {pass "ignore break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "ignore break marker1"} |
| timeout {fail "(timeout) ignore break marker1"} |
| } |
| |
| send_gdb "info break $expect_out(1,string)\n" |
| gdb_expect { |
| -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+y.*ignore next 1 hits.*$gdb_prompt $"\ |
| {pass "info ignored break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "info ignored break marker1"} |
| timeout {fail "(timeout) info ignored break marker1"} |
| } |
| |
| gdb_continue_to_end "no stop at ignored break marker1" |
| rerun_to_main |
| |
| # See the comments in condbreak.exp for "run until breakpoint at marker1" |
| # for an explanation of the xfail below. |
| send_gdb "continue\n" |
| gdb_expect { |
| -re "Breakpoint \[0-9\]*, marker1.*$gdb_prompt $"\ |
| {pass "continue to break marker1, 2nd time"} |
| -re "Breakpoint \[0-9\]*, $hex in marker1.*$gdb_prompt $"\ |
| {xfail "continue to break marker1, 2nd time"} |
| -re "$gdb_prompt $"\ |
| {fail "continue to break marker1, 2nd time"} |
| timeout {fail "(timeout) continue to break marker1, 2nd time"} |
| } |
| |
| # Verify that we can specify both an ignore count and an auto-delete. |
| # |
| if ![runto_main] then { fail "enable/disable break tests suppressed" } |
| |
| send_gdb "break marker1\n" |
| gdb_expect { |
| -re "Breakpoint (\[0-9\]*) at .*, line 4\[38\].*$gdb_prompt $"\ |
| {pass "break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "break marker1"} |
| timeout {fail "(timeout) break marker1"} |
| } |
| |
| send_gdb "ignore $expect_out(1,string) 1\n" |
| gdb_expect { |
| -re "Will ignore next crossing of breakpoint \[0-9\]*.*$gdb_prompt $"\ |
| {pass "ignore break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "ignore break marker1"} |
| timeout {fail "(timeout) ignore break marker1"} |
| } |
| |
| send_gdb "enable del $expect_out(1,string)\n" |
| gdb_expect { |
| -re "$gdb_prompt $"\ |
| {pass "enable del break marker1"} |
| timeout {fail "(timeout) enable del break marker1"} |
| } |
| |
| send_gdb "info break $expect_out(1,string)\n" |
| gdb_expect { |
| -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+del\[ \t\]+y.*ignore next 1 hits.*$gdb_prompt $"\ |
| {pass "info break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "info break marker1"} |
| timeout {fail "(timeout) info break marker2"} |
| } |
| |
| gdb_continue_to_end "no stop at ignored & auto-deleted break marker1" |
| rerun_to_main |
| |
| send_gdb "continue\n" |
| gdb_expect { |
| -re ".*marker1 .*:4\[38\].*$gdb_prompt $"\ |
| {pass "continue to ignored & auto-deleted break marker1"} |
| -re "Breakpoint \[0-9\]*, marker1.*$gdb_prompt $"\ |
| {fail "continue to ignored & auto-deleted break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "continue to ignored & auto-deleted break marker1"} |
| timeout {fail "(timeout) continue to ignored & auto-deleted break marker1"} |
| } |
| |
| # Verify that a disabled breakpoint's ignore count isn't updated when |
| # the bp is encountered. |
| # |
| if ![runto_main] then { fail "enable/disable break tests suppressed" } |
| |
| send_gdb "break marker1\n" |
| gdb_expect { |
| -re "Breakpoint (\[0-9\]*) at .*, line 4\[38\].*$gdb_prompt $"\ |
| {pass "break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "break marker1"} |
| timeout {fail "(timeout) break marker1"} |
| } |
| |
| send_gdb "ignore $expect_out(1,string) 10\n" |
| gdb_expect { |
| -re "Will ignore next 10 crossings of breakpoint \[0-9\]*.*$gdb_prompt $"\ |
| {pass "ignore break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "ignore break marker1"} |
| timeout {fail "(timeout) ignore break marker1"} |
| } |
| |
| send_gdb "disable $expect_out(1,string)\n" |
| gdb_expect { |
| -re "$gdb_prompt $"\ |
| {pass "disable break marker1"} |
| timeout {fail "(timeout) disable break marker1"} |
| } |
| |
| gdb_continue_to_end "no stop at ignored & disabled break marker1" |
| rerun_to_main |
| |
| send_gdb "info break $expect_out(1,string)\n" |
| gdb_expect { |
| -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+n.*ignore next 10 hits.*$gdb_prompt $"\ |
| {pass "info ignored & disabled break marker1"} |
| -re "$gdb_prompt $"\ |
| {fail "info ignored & disabled break marker1"} |
| timeout {fail "(timeout) info ignored & disabled break marker1"} |
| } |
| |
| # Verify that GDB correctly handles the "continue" command with an argument, |
| # which is an ignore count to set on the currently stopped-at breakpoint. |
| # (Also verify that GDB gracefully handles the case where the inferior |
| # isn't stopped at a breakpoint.) |
| # |
| if ![runto_main] then { fail "enable/disable break tests suppressed" } |
| |
| send_gdb "break 79\n" |
| gdb_expect { |
| -re "Breakpoint \[0-9\]*.*, line 79.*$gdb_prompt $"\ |
| {pass "prepare to continue with ignore count"} |
| -re "$gdb_prompt $"\ |
| {fail "prepare to continue with ignore count"} |
| timeout {fail "(timeout) prepare to continue with ignore count"} |
| } |
| send_gdb "continue 2\n" |
| gdb_expect { |
| -re "Will ignore next crossing of breakpoint \[0-9\]*. Continuing..*$gdb_prompt $"\ |
| {pass "continue with ignore count"} |
| -re "$gdb_prompt $"\ |
| {fail "continue with ignore count"} |
| timeout {fail "(timeout) continue with ignore count"} |
| } |
| |
| send_gdb "next\n" |
| gdb_expect { |
| -re ".*81\[ \t\]*marker1.*$gdb_prompt $"\ |
| {pass "step after continue with ignore count"} |
| -re "$gdb_prompt $"\ |
| {fail "step after continue with ignore count"} |
| timeout {fail "(timeout) step after continue with ignore count"} |
| } |
| |
| # ??rehrauer: Huh. This appears to be an actual bug. (No big |
| # surprise, since this feature hasn't been tested...) Looks like |
| # GDB is currently trying to set the ignore count of bp # -1! |
| # |
| setup_xfail hppa_*_* |
| send_gdb "continue 2\n" |
| gdb_expect { |
| -re "Not stopped at any breakpoint; argument ignored..*$gdb_prompt $"\ |
| {pass "continue with ignore count, not stopped at bpt"} |
| -re "No breakpoint number -1.*$gdb_prompt $"\ |
| {xfail "(DTS'd) continue with ignore count, not stopped at bpt"} |
| -re "$gdb_prompt $"\ |
| {fail "continue with ignore count, not stopped at bpt"} |
| timeout {fail "(timeout) step after continue with ignore count, not stopped at bpt"} |
| } |
| |
| gdb_exit |
| return 0 |
