| 2004-10-15 Alan Modra <amodra@bigpond.net.au> |
| |
| * Makefile.am: Run "make dep-am" |
| * Makefile.in: Regenerate. |
| |
| 2004-10-12 Bob Wilson <bob.wilson@acm.org> |
| |
| * xtensa-dis.c: Use ISO C90 formatting. |
| |
| 2004-10-09 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-opc.c: Revert 2004-09-09 change. |
| |
| 2004-10-07 Bob Wilson <bob.wilson@acm.org> |
| |
| * xtensa-dis.c (state_names): Delete. |
| (fetch_data): Use xtensa_isa_maxlength. |
| (print_xtensa_operand): Replace operand parameter with opcode/operand |
| pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. |
| (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot |
| instruction bundles. Use xmalloc instead of malloc. |
| |
| 2004-10-07 David Gibson <david@gibson.dropbear.id.au> |
| |
| * ppc-opc.c: Replace literal "0"s with NULLs in pointer |
| initializers. |
| |
| 2004-10-07 Tomer Levi <Tomer.Levi@nsc.com> |
| |
| * crx-opc.c (crx_instruction): Support Co-processor insns. |
| * crx-dis.c (COP_ARG_TYPE): New enum for CO-Processor arguments. |
| (getregliststring): Change function to use the above enum. |
| (print_arg): Handle CO-Processor insns. |
| (crx_cinvs): Add 'b' option to invalidate the branch-target |
| cache. |
| |
| 2004-10-06 Aldy Hernandez <aldyh@redhat.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add efscfd, efdabs, efdnabs, |
| efdneg, efdadd, efdsub, efdmul, efddiv, efdcmpgt, efdcmplt, |
| efdcmpeq, efdtstgt, efdtstlt, efdtsteq, efdcfsi, efdcfsid, |
| efdcfui, efdcfuid, efdcfsf, efdcfuf, efdctsi, efdctsidz, efdctsiz, |
| efdctui, efdctuidz, efdctuiz, efdctsf, efdctuf, efdctuf, efdcfs. |
| |
| 2004-10-01 Bill Farmer <Bill@the-farmers.freeserve.co.uk> |
| |
| * pdp11-dis.c (print_insn_pdp11): Subtract the SOB's displacement |
| rather than add it. |
| |
| 2004-09-30 Paul Brook <paul@codesourcery.com> |
| |
| * arm-dis.c (print_insn_arm): Handle 'e' for SMI instruction. |
| * arm-opc.h: Document %e. Add ARMv6ZK instructions. |
| |
| 2004-09-17 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * Makefile.am (AUTOMAKE_OPTIONS): Require 1.9. |
| (CONFIG_STATUS_DEPENDENCIES): New. |
| (Makefile): Removed. |
| (config.status): Likewise. |
| * Makefile.in: Regenerated. |
| |
| 2004-09-17 Alan Modra <amodra@bigpond.net.au> |
| |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2004-09-11 Andreas Schwab <schwab@suse.de> |
| |
| * configure: Rebuild. |
| |
| 2004-09-09 Segher Boessenkool <segher@kernel.crashing.org> |
| |
| * ppc-opc.c (L): Make this field not optional. |
| |
| 2004-09-03 Tomer Levi <Tomer.Levi@nsc.com> |
| |
| * opc-crx.c: Rename 'popma' to 'popa', remove 'pushma'. |
| Fix parameter to 'm[t|f]csr' insns. |
| |
| 2004-08-30 Nathanael Nerode <neroden@gcc.gnu.org> |
| |
| * configure.in: Autoupdate to autoconf 2.59. |
| * aclocal.m4: Rebuild with aclocal 1.4p6. |
| * configure: Rebuild with autoconf 2.59. |
| * Makefile.in: Rebuild with automake 1.4p6 (picking up |
| bfd changes for autoconf 2.59 on the way). |
| * config.in: Rebuild with autoheader 2.59. |
| |
| 2004-08-27 Richard Sandiford <rsandifo@redhat.com> |
| |
| * frv-desc.[ch], frv-opc.[ch]: Regenerated. |
| |
| 2004-07-30 Michal Ludvig <mludvig@suse.cz> |
| |
| * i386-dis.c (GRPPADLCK): Renamed to GRPPADLCK1 |
| (GRPPADLCK2): New define. |
| (twobyte_has_modrm): True for 0xA6. |
| (grps): GRPPADLCK2 for opcode 0xA6. |
| |
| 2004-07-29 Alexandre Oliva <aoliva@redhat.com> |
| |
| Introduce SH2a support. |
| * sh-opc.h (arch_sh2a_base): Renumber. |
| (arch_sh2a_nofpu_base): Remove. |
| (arch_sh_base_mask): Adjust. |
| (arch_opann_mask): New. |
| (arch_sh2a, arch_sh2a_nofpu): Adjust. |
| (arch_sh2a_up, arch_sh2a_nofpu_up): Likewise. |
| (sh_table): Adjust whitespace. |
| 2004-02-24 Corinna Vinschen <vinschen@redhat.com> |
| * sh-opc.h (arch_sh2a_nofpu_up): New. Use instead of arch_sh2a_up in |
| instruction list throughout. |
| (arch_sh2a_up): Redefine to include fpu instruction set. Use instead |
| of arch_sh2a in instruction list throughout. |
| (arch_sh2e_up): Accomodate above changes. |
| (arch_sh2_up): Ditto. |
| 2004-02-20 Corinna Vinschen <vinschen@redhat.com> |
| * sh-opc.h: Add arch_sh2a_nofpu to arch_sh2_up. |
| 2004-02-18 Corinna Vinschen <vinschen@redhat.com> |
| * sh-dis.c (print_insn_sh): Add bfd_mach_sh2a_nofpu handling. |
| * sh-opc.h (arch_sh2a_nofpu): New. |
| (arch_sh2a_up): New, defines sh2a and sh2a_nofpu. |
| (sh_table): Change all arch_sh2a to arch_sh2a_up unless FPU |
| instruction. |
| 2004-01-20 DJ Delorie <dj@redhat.com> |
| * sh-dis.c (print_insn_sh): SH2A does not have 'X' fp regs. |
| 2003-12-29 DJ Delorie <dj@redhat.com> |
| * sh-opc.c (sh_nibble_type, sh_arg_type, arch_2a, arch_2e_up, |
| sh_opcode_info, sh_table): Add sh2a support. |
| (arch_op32): New, to tag 32-bit opcodes. |
| * sh-dis.c (print_insn_sh): Support sh2a opcodes. |
| 2003-12-02 Michael Snyder <msnyder@redhat.com> |
| * sh-opc.h (arch_sh2a): Add. |
| * sh-dis.c (arch_sh2a): Handle. |
| * sh-opc.h (arch_sh2_up): Fix up to include arch_sh2a. |
| |
| 2004-07-27 Tomer Levi <Tomer.Levi@nsc.com> |
| |
| * crx-opc.c: Add popx,pushx insns. Indent code, fix comments. |
| |
| 2004-07-22 Nick Clifton <nickc@redhat.com> |
| |
| PR/280 |
| * h8300-dis.c (bfd_h8_disassemble): Do not dump raw bytes for the |
| insns - this is done by objdump itself. |
| * h8500-dis.c (print_insn_h8500): Likewise. |
| |
| 2004-07-21 Jan Beulich <jbeulich@novell.com> |
| |
| * i386-dis.c (OP_E): Show rip-relative addressing in 64-bit mode |
| regardless of address size prefix in effect. |
| (ptr_reg): Size or address registers does not depend on rex64, but |
| on the presence of an address size override. |
| (OP_MMX): Use rex.x only for xmm registers. |
| (OP_EM): Use rex.z only for xmm registers. |
| |
| 2004-07-20 Maciej W. Rozycki <macro@linux-mips.org> |
| |
| * mips-opc.c (mips_builtin_opcodes): Move coprocessor 2 |
| move/branch operations to the bottom so that VR5400 multimedia |
| instructions take precedence in disassembly. |
| |
| 2004-07-20 Maciej W. Rozycki <macro@linux-mips.org> |
| |
| * mips-opc.c (mips_builtin_opcodes): Remove the MIPS32 |
| ISA-specific "break" encoding. |
| |
| 2004-07-13 Elvis Chiang <elvisfb@gmail.com> |
| |
| * arm-opc.h: Fix typo in comment. |
| |
| 2004-07-11 Andreas Schwab <schwab@suse.de> |
| |
| * m68k-dis.c (m68k_valid_ea): Fix typos in last change. |
| |
| 2004-07-09 Andreas Schwab <schwab@suse.de> |
| |
| * m68k-dis.c (m68k_valid_ea): Check validity of all codes. |
| |
| 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com> |
| |
| * Makefile.am (CFILES): Add crx-dis.c, crx-opc.c. |
| (ALL_MACHINES): Add crx-dis.lo, crx-opc.lo. |
| (crx-dis.lo): New target. |
| (crx-opc.lo): Likewise. |
| * Makefile.in: Regenerate. |
| * configure.in: Handle bfd_crx_arch. |
| * configure: Regenerate. |
| * crx-dis.c: New file. |
| * crx-opc.c: New file. |
| * disassemble.c (ARCH_crx): Define. |
| (disassembler): Handle ARCH_crx. |
| |
| 2004-06-29 James E Wilson <wilson@specifixinc.com> |
| |
| * ia64-opc-a.c (ia64_opcodes_a): Delete mov immediate pseudo for adds. |
| * ia64-asmtab.c: Regnerate. |
| |
| 2004-06-28 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-opc.c (insert_fxm): Handle mfocrf and mtocrf. |
| (extract_fxm): Don't test dialect. |
| (XFXFXM_MASK): Include the power4 bit. |
| (XFXM): Add p4 param. |
| (powerpc_opcodes): Add mfocrf and mtocrf. Adjust mtcr. |
| |
| 2004-06-27 Alexandre Oliva <aoliva@redhat.com> |
| |
| 2003-07-21 Richard Sandiford <rsandifo@redhat.com> |
| * disassemble.c (disassembler): Handle bfd_mach_h8300sxn. |
| |
| 2004-06-26 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-opc.c (BH, XLBH_MASK): Define. |
| (powerpc_opcodes): Allow BH field on bclr, bclrl, bcctr, bcctrl. |
| |
| 2004-06-24 Alan Modra <amodra@bigpond.net.au> |
| |
| * i386-dis.c (x_mode): Comment. |
| (two_source_ops): File scope. |
| (float_mem): Correct fisttpll and fistpll. |
| (float_mem_mode): New table. |
| (dofloat): Use it. |
| (OP_E): Correct intel mode PTR output. |
| (ptr_reg): Use open_char and close_char. |
| (PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for |
| operands. Set two_source_ops. |
| |
| 2004-06-15 Alan Modra <amodra@bigpond.net.au> |
| |
| * arc-ext.c (build_ARC_extmap): Use bfd_get_section_size |
| instead of _raw_size. |
| |
| 2004-06-08 Jakub Jelinek <jakub@redhat.com> |
| |
| * ia64-gen.c (in_iclass): Handle more postinc st |
| and ld variants. |
| * ia64-asmtab.c: Rebuilt. |
| |
| 2004-06-01 Martin Schwidefsky <schwidefsky@de.ibm.com> |
| |
| * s390-opc.txt: Correct architecture mask for some opcodes. |
| lrv, lrvh, strv, ml, dl, alc, slb rll and mvclu are available |
| in the esa mode as well. |
| |
| 2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com> |
| |
| * sh-dis.c (target_arch): Make unsigned. |
| (print_insn_sh): Replace (most of) switch with a call to |
| sh_get_arch_from_bfd_mach(). Also use new architecture flags system. |
| * sh-opc.h: Redefine architecture flags values. |
| Add sh3-nommu architecture. |
| Reorganise <arch>_up macros so they make more visual sense. |
| (SH_MERGE_ARCH_SET): Define new macro. |
| (SH_VALID_BASE_ARCH_SET): Likewise. |
| (SH_VALID_MMU_ARCH_SET): Likewise. |
| (SH_VALID_CO_ARCH_SET): Likewise. |
| (SH_VALID_ARCH_SET): Likewise. |
| (SH_MERGE_ARCH_SET_VALID): Likewise. |
| (SH_ARCH_SET_HAS_FPU): Likewise. |
| (SH_ARCH_SET_HAS_DSP): Likewise. |
| (SH_ARCH_UNKNOWN_ARCH): Likewise. |
| (sh_get_arch_from_bfd_mach): Add prototype. |
| (sh_get_arch_up_from_bfd_mach): Likewise. |
| (sh_get_bfd_mach_from_arch_set): Likewise. |
| (sh_merge_bfd_arc): Likewise. |
| |
| 2004-05-24 Peter Barada <peter@the-baradas.com> |
| |
| * m68k-dis.c(print_insn_m68k): Strip body of diassembly out |
| into new match_insn_m68k function. Loop over canidate |
| matches and select first that completely matches. |
| * m68k-dis.c(print_insn_arg): Fix 'g' case to only extract 1 bit. |
| * m68k-dis.c(print_insn_arg): Call new function m68k_valid_ea |
| to verify addressing for MAC/EMAC. |
| * m68k-dis.c(print_insn_arg): Use reg_half_names for MAC/EMAC |
| reigster halves since 'fpu' and 'spl' look misleading. |
| * m68k-dis.c(fetch_arg): Fix 'G', 'H', 'I', 'f', 'M', 'N' cases. |
| * m68k-opc.c: Rearragne mac/emac cases to use longest for |
| first, tighten up match masks. |
| * m68k-opc.c: Add 'size' field to struct m68k_opcode. Produce |
| 'size' from special case code in print_insn_m68k to |
| determine decode size of insns. |
| |
| 2004-05-19 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-opc.c (insert_fxm): Enable two operand mfcr when -many as |
| well as when -mpower4. |
| |
| 2004-05-13 Nick Clifton <nickc@redhat.com> |
| |
| * po/fr.po: Updated French translation. |
| |
| 2004-05-05 Peter Barada <peter@the-baradas.com> |
| |
| * m68k-dis.c(print_insn_m68k): Add new chips, use core |
| variants in arch_mask. Only set m68881/68851 for 68k chips. |
| * m68k-op.c: Switch from ColdFire chips to core variants. |
| |
| 2004-05-05 Alan Modra <amodra@bigpond.net.au> |
| |
| PR 147. |
| * ppc-opc.c (PPCVEC): Remove PPC_OPCODE_PPC. |
| |
| 2004-04-29 Ben Elliston <bje@au.ibm.com> |
| |
| * ppc-opc.c (XCMPL): Renmame to XOPL. Update users. |
| (powerpc_opcodes): Add "dbczl" instruction for PPC970. |
| |
| 2004-04-22 Kaz Kojima <kkojima@rr.iij4u.or.jp> |
| |
| * sh-dis.c (print_insn_sh): Print the value in constant pool |
| as a symbol if it looks like a symbol. |
| |
| 2004-04-22 Peter Barada <peter@the-baradas.com> |
| |
| * m68k-dis.c(print_insn_m68k): Set mfcmac/mcfemac on |
| appropriate ColdFire architectures. |
| (print_insn_m68k): Handle EMAC, MAC/EMAC scalefactor, and MAC/EMAC |
| mask addressing. |
| Add EMAC instructions, fix MAC instructions. Remove |
| macmw/macml/msacmw/msacml instructions since mask addressing now |
| supported. |
| |
| 2004-04-20 Jakub Jelinek <jakub@redhat.com> |
| |
| * sparc-opc.c (fmoviccx, fmovfccx, fmovccx): Define. |
| (fmovicc, fmovfcc, fmovcc): Remove fpsize argument, change opcode to |
| suffix. Use fmov*x macros, create all 3 fpsize variants in one |
| macro. Adjust all users. |
| |
| 2004-04-15 Anil Paranjpe <anilp1@kpitcummins.com> |
| |
| * h8300-dis.c (bfd_h8_disassemble) : Treat "adds" & "subs" |
| separately. |
| |
| 2004-03-30 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com> |
| |
| * m32r-asm.c: Regenerate. |
| |
| 2004-03-29 Stan Shebs <shebs@apple.com> |
| |
| * mpw-config.in, mpw-make.sed: Remove MPW support files, no longer |
| used. |
| |
| 2004-03-19 Alan Modra <amodra@bigpond.net.au> |
| |
| * aclocal.m4: Regenerate. |
| * config.in: Regenerate. |
| * configure: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| * po/opcodes.pot: Regenerate. |
| |
| 2004-03-16 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-dis.c (print_insn_powerpc): Don't print tabs. Handle |
| PPC_OPERANDS_GPR_0. |
| * ppc-opc.c (RA0): Define. |
| (RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0. |
| (RAOPT): Rename from RAO. Update all uses. |
| (powerpc_opcodes): Use RA0 as appropriate. |
| |
| 2004-03-15 Aldy Hernandez <aldyh@redhat.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add BOOKE versions of mfsprg. |
| |
| 2004-03-15 Alan Modra <amodra@bigpond.net.au> |
| |
| * sparc-dis.c (print_insn_sparc): Update getword prototype. |
| |
| 2004-03-12 Michal Ludvig <mludvig@suse.cz> |
| |
| * i386-dis.c (GRPPLOCK): Delete. |
| (grps): Delete GRPPLOCK entry. |
| |
| 2004-03-12 Alan Modra <amodra@bigpond.net.au> |
| |
| * i386-dis.c (OP_M, OP_0f0e, OP_0fae, NOP_Fixup): New functions. |
| (M, Mp): Use OP_M. |
| (None, PADLOCK_SPECIAL, PADLOCK_0): Delete. |
| (GRPPADLCK): Define. |
| (dis386): Use NOP_Fixup on "nop". |
| (dis386_twobyte): Use GRPPADLCK on opcode 0xa7. |
| (twobyte_has_modrm): Set for 0xa7. |
| (padlock_table): Delete. Move to.. |
| (grps): ..here, using OP_0f07. Use OP_Ofae on lfence, mfence |
| and clflush. |
| (print_insn): Revert PADLOCK_SPECIAL code. |
| (OP_E): Delete sfence, lfence, mfence checks. |
| |
| 2004-03-12 Jakub Jelinek <jakub@redhat.com> |
| |
| * i386-dis.c (grps): Use INVLPG_Fixup instead of OP_E for invlpg. |
| (INVLPG_Fixup): New function. |
| (PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag. |
| |
| 2004-03-12 Michal Ludvig <mludvig@suse.cz> |
| |
| * i386-dis.c (PADLOCK_SPECIAL, PADLOCK_0): New defines. |
| (dis386_twobyte): Opcode 0xa7 is PADLOCK_0. |
| (padlock_table): New struct with PadLock instructions. |
| (print_insn): Handle PADLOCK_SPECIAL. |
| |
| 2004-03-12 Alan Modra <amodra@bigpond.net.au> |
| |
| * i386-dis.c (grps): Use clflush by default for 0x0fae/7. |
| (OP_E): Twiddle clflush to sfence here. |
| |
| 2004-03-08 Nick Clifton <nickc@redhat.com> |
| |
| * po/de.po: Updated German translation. |
| |
| 2003-03-03 Andrew Stubbs <andrew.stubbs@superh.com> |
| |
| * sh-dis.c (print_insn_sh): Don't disassemble fp instructions in |
| nofpu mode. Add BFD type bfd_mach_sh4_nommu_nofpu. |
| * sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions |
| accordingly. |
| |
| 2004-03-01 Richard Sandiford <rsandifo@redhat.com> |
| |
| * frv-asm.c: Regenerate. |
| * frv-desc.c: Regenerate. |
| * frv-desc.h: Regenerate. |
| * frv-dis.c: Regenerate. |
| * frv-ibld.c: Regenerate. |
| * frv-opc.c: Regenerate. |
| * frv-opc.h: Regenerate. |
| |
| 2004-03-01 Richard Sandiford <rsandifo@redhat.com> |
| |
| * frv-desc.c, frv-opc.c: Regenerate. |
| |
| 2004-03-01 Richard Sandiford <rsandifo@redhat.com> |
| |
| * frv-desc.c, frv-opc.c, frv-opc.h: Regenerate. |
| |
| 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com> |
| |
| * sh-opc.h: Move fsca and fsrra instructions from sh4a to sh4. |
| Also correct mistake in the comment. |
| |
| 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com> |
| |
| * sh-dis.c (print_insn_sh): Add REG_N_D nibble type to |
| ensure that double registers have even numbers. |
| Add REG_N_B01 for nn01 (binary 01) nibble to ensure |
| that reserved instruction 0xfffd does not decode the same |
| as 0xfdfd (ftrv). |
| * sh-opc.h: Add REG_N_D nibble type and use it whereever |
| REG_N refers to a double register. |
| Add REG_N_B01 nibble type and use it instead of REG_NM |
| in ftrv. |
| Adjust the bit patterns in a few comments. |
| |
| 2004-02-25 Aldy Hernandez <aldyh@redhat.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Change mask for dcbt and dcbtst. |
| |
| 2004-02-20 Aldy Hernandez <aldyh@redhat.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Move mfmcsrr0 before mfdc_dat. |
| |
| 2004-02-20 Aldy Hernandez <aldyh@redhat.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add m*ivor35. |
| |
| 2004-02-20 Aldy Hernandez <aldyh@redhat.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add mfivor32, mfivor33, mfivor34, |
| mtivor32, mtivor33, mtivor34. |
| |
| 2004-02-19 Aldy Hernandez <aldyh@redhat.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Add mfmcar. |
| |
| 2004-02-10 Petko Manolov <petkan@nucleusys.com> |
| |
| * arm-opc.h Maverick accumulator register opcode fixes. |
| |
| 2004-02-13 Ben Elliston <bje@wasabisystems.com> |
| |
| * m32r-dis.c: Regenerate. |
| |
| 2004-01-27 Michael Snyder <msnyder@redhat.com> |
| |
| * sh-opc.h (sh_table): "fsrra", not "fssra". |
| |
| 2004-01-23 Andrew Over <andrew.over@cs.anu.edu.au> |
| |
| * sparc-opc.c (fdtox, fstox, fqtox, fxtod, fxtos, fxtoq): Tighten |
| contraints. |
| |
| 2004-01-19 Andrew Over <andrew.over@cs.anu.edu.au> |
| |
| * sparc-opc.c (sparc_opcodes) <f[dsq]tox, fxto[dsq]>: Fix args. |
| |
| 2004-01-19 Alan Modra <amodra@bigpond.net.au> |
| |
| * i386-dis.c (OP_E): Print scale factor on intel mode sib when not |
| 1. Don't print scale factor on AT&T mode when index missing. |
| |
| 2004-01-16 Alexandre Oliva <aoliva@redhat.com> |
| |
| * m10300-opc.c (mov): 8- and 24-bit immediates are zero-extended |
| when loaded into XR registers. |
| |
| 2004-01-14 Richard Sandiford <rsandifo@redhat.com> |
| |
| * frv-desc.h: Regenerate. |
| * frv-desc.c: Regenerate. |
| * frv-opc.c: Regenerate. |
| |
| 2004-01-13 Michael Snyder <msnyder@redhat.com> |
| |
| * sh-dis.c (print_insn_sh): Allocate 4 bytes for insn. |
| |
| 2004-01-09 Paul Brook <paul@codesourcery.com> |
| |
| * arm-opc.h (arm_opcodes): Move generic mcrr after known |
| specific opcodes. |
| |
| 2004-01-07 Daniel Jacobowitz <drow@mvista.com> |
| |
| * Makefile.am (libopcodes_la_DEPENDENCIES) |
| (libopcodes_la_LIBADD): Revert 2003-05-17 change. Add explanatory |
| comment about the problem. |
| * Makefile.in: Regenerate. |
| |
| 2004-01-06 Alexandre Oliva <aoliva@redhat.com> |
| |
| 2003-12-19 Alexandre Oliva <aoliva@redhat.com> |
| * frv-asm.c (parse_ulo16, parse_uhi16, parse_d12): Fix some |
| cut&paste errors in shifting/truncating numerical operands. |
| 2003-08-04 Alexandre Oliva <aoliva@redhat.com> |
| * frv-asm.c (parse_ulo16): Parse gotofflo and gotofffuncdesclo. |
| (parse_uslo16): Likewise. |
| (parse_uhi16): Parse gotoffhi and gotofffuncdeschi. |
| (parse_d12): Parse gotoff12 and gotofffuncdesc12. |
| (parse_s12): Likewise. |
| 2003-08-04 Alexandre Oliva <aoliva@redhat.com> |
| * frv-asm.c (parse_ulo16): Parse gotlo and gotfuncdesclo. |
| (parse_uslo16): Likewise. |
| (parse_uhi16): Parse gothi and gotfuncdeschi. |
| (parse_d12): Parse got12 and gotfuncdesc12. |
| (parse_s12): Likewise. |
| |
| 2004-01-02 Albert Bartoszko <albar@nt.kegel.com.pl> |
| |
| * msp430-dis.c (msp430_doubleoperand): Check for an 'add' |
| instruction which looks similar to an 'rla' instruction. |
| |
| For older changes see ChangeLog-0203 |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
