gdb/config/w65/tm-w65.h - binutils-gdb - Git at Google

 /* Parameters for execution on a WDC 65816 machine.
    Copyright (C) 1995 Free Software Foundation, Inc.

    This file is part of GDB.

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330,
    Boston, MA 02111-1307, USA.  */

 /* Contributed by Steve Chamberlain sac@cygnus.com */

 #define GDB_TARGET_IS_W65

 #define IEEE_FLOAT (1)

 /* Define the bit, byte, and word ordering of the machine.  */

 #define TARGET_BYTE_ORDER LITTLE_ENDIAN


 /* Offset from address of function to start of its code.
    Zero on most machines.  */

 #define FUNCTION_START_OFFSET 0

 /* Advance PC across any function entry prologue instructions
    to reach some "real" code.  */

 extern CORE_ADDR w65_skip_prologue ();

 #define SKIP_PROLOGUE(ip) \
     {(ip) = w65_skip_prologue(ip);}


 /* Immediately after a function call, return the saved pc.
    Can't always go through the frames for this because on some machines
    the new frame is not set up until the new function executes
    some instructions.

    The return address is the value saved in the PR register + 4  */

 #define SAVED_PC_AFTER_CALL(frame) \
   saved_pc_after_call(frame)


 /* Stack grows downward.  */

 #define INNER_THAN(lhs,rhs) ((lhs) < (rhs))

 /* Illegal instruction - used by the simulator for breakpoint
    detection */

 #define BREAKPOINT {0xcb}	/* WAI */

 /* If your kernel resets the pc after the trap happens you may need to
    define this before including this file.  */
 #define DECR_PC_AFTER_BREAK 0

 /* Return 1 if P points to an invalid floating point value.  */

 #define INVALID_FLOAT(p, len) 0	/* Just a first guess; not checked */

 /* Say how long registers are.  */
 /*#define REGISTER_TYPE  int */

 /* Say how much memory is needed to store a copy of the register set */
 #define REGISTER_BYTES    (NUM_REGS*4)

 /* Index within `registers' of the first byte of the space for
    register N.  */

 #define REGISTER_BYTE(N)  ((N)*4)

 /* Number of bytes of storage in the actual machine representation
    for register N.  */

 #define REGISTER_RAW_SIZE(N)     (((N) < 16) ? 2 : 4)

 #define REGISTER_VIRTUAL_SIZE(N)  REGISTER_RAW_SIZE(N)

 /* Largest value REGISTER_RAW_SIZE can have.  */

 #define MAX_REGISTER_RAW_SIZE 4

 /* Largest value REGISTER_VIRTUAL_SIZE can have.  */

 #define MAX_REGISTER_VIRTUAL_SIZE 4

 /* Return the GDB type object for the "standard" data type
    of data in register N.  */

 #define REGISTER_VIRTUAL_TYPE(N) \
   (REGISTER_VIRTUAL_SIZE(N) == 2 ? builtin_type_unsigned_short : builtin_type_unsigned_long)

 /* Initializer for an array of names of registers.
    Entries beyond the first NUM_REGS are ignored.  */

 #define REGISTER_NAMES \
   {"r0","r1","r2", "r3", "r4", "r5", "r6", "r7",  \
    "r8","r9","r10","r11","r12","r13","r14","r15", \
    "pc","a", "x",  "y",  "dbr","d",  "s",  "p",   \
    "ticks","cycles","insts"}

 /* Register numbers of various important registers.
    Note that some of these values are "real" register numbers,
    and correspond to the general registers of the machine,
    and some are "phony" register numbers which are too large
    to be actual register numbers as far as the user is concerned
    but do serve to get the desired values when passed to read_register.  */

 #define SP_REGNUM  22
 #define FP_REGNUM  15
 #define NUM_REGS   27
 #define PC_REGNUM  16
 #define P_REGNUM   23

 /* Store the address of the place in which to copy the structure the
    subroutine will return.  This is called from call_function.

    We store structs through a pointer passed in R4 */

 #define STORE_STRUCT_RETURN(ADDR, SP) \
     { write_register (4, (ADDR));  }

 /* Extract from an array REGBUF containing the (raw) register state
    a function return value of type TYPE, and copy that, in virtual format,
    into VALBUF.  */

 #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
   memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))


 /* Write into appropriate registers a function return value
    of type TYPE, given in virtual format.

    Things always get returned in R4/R5 */

 #define STORE_RETURN_VALUE(TYPE,VALBUF) \
   write_register_bytes (REGISTER_BYTE(4), VALBUF, TYPE_LENGTH (TYPE))


 /* Extract from an array REGBUF containing the (raw) register state
    the address in which a function should return its structure value,
    as a CORE_ADDR (or an expression that can be used as one).  */

 #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))

 /* A macro that tells us whether the function invocation represented
    by FI does not have a frame on the stack associated with it.  If it
    does not, FRAMELESS is set to 1, else 0.  */

 #define FRAMELESS_FUNCTION_INVOCATION(FI) \
   (frameless_look_for_prologue (FI))

 #define FRAME_CHAIN(FRAME)       w65_frame_chain(FRAME)
 #define FRAME_SAVED_PC(FRAME)    (w65_frame_saved_pc(FRAME))
 #define FRAME_ARGS_ADDRESS(fi)   (fi)->frame
 #define FRAME_LOCALS_ADDRESS(fi) (fi)->frame

 /* Set VAL to the number of args passed to frame described by FI.
    Can set VAL to -1, meaning no way to tell.  */

 /* We can't tell how many args there are */

 #define FRAME_NUM_ARGS(fi) (-1)

 /* Return number of bytes at start of arglist that are not really args.  */

 #define FRAME_ARGS_SKIP 0

 /* Put here the code to store, into a struct frame_saved_regs,
    the addresses of the saved registers of frame described by FRAME_INFO.
    This includes special registers such as pc and fp saved in special
    ways in the stack frame.  sp is even more special:
    the address we return for it IS the sp for the next frame.  */

 #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
    frame_find_saved_regs(frame_info, &(frame_saved_regs))

 typedef unsigned short INSN_WORD;

 extern CORE_ADDR w65_addr_bits_remove (CORE_ADDR);
 #define ADDR_BITS_REMOVE(addr) w65_addr_bits_remove (addr)

 #define CALL_DUMMY_LENGTH 10

 /* Discard from the stack the innermost frame,
    restoring all saved registers.  */

 #define POP_FRAME pop_frame();


 #define NOP   {0xea}

 #define REGISTER_SIZE 4

 #define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno)

 #define TARGET_INT_BIT  16
 #define TARGET_LONG_BIT 32
 #define TARGET_PTR_BIT  32
	/* Parameters for execution on a WDC 65816 machine.
	Copyright (C) 1995 Free Software Foundation, Inc.

	This file is part of GDB.

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 59 Temple Place - Suite 330,
	Boston, MA 02111-1307, USA. */

	/* Contributed by Steve Chamberlain sac@cygnus.com */

	#define GDB_TARGET_IS_W65

	#define IEEE_FLOAT (1)

	/* Define the bit, byte, and word ordering of the machine. */

	#define TARGET_BYTE_ORDER LITTLE_ENDIAN


	/* Offset from address of function to start of its code.
	Zero on most machines. */

	#define FUNCTION_START_OFFSET 0

	/* Advance PC across any function entry prologue instructions
	to reach some "real" code. */

	extern CORE_ADDR w65_skip_prologue ();

	#define SKIP_PROLOGUE(ip) \
	{(ip) = w65_skip_prologue(ip);}


	/* Immediately after a function call, return the saved pc.
	Can't always go through the frames for this because on some machines
	the new frame is not set up until the new function executes
	some instructions.

	The return address is the value saved in the PR register + 4 */

	#define SAVED_PC_AFTER_CALL(frame) \
	saved_pc_after_call(frame)


	/* Stack grows downward. */

	#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))

	/* Illegal instruction - used by the simulator for breakpoint
	detection */

	#define BREAKPOINT {0xcb} /* WAI */

	/* If your kernel resets the pc after the trap happens you may need to
	define this before including this file. */
	#define DECR_PC_AFTER_BREAK 0

	/* Return 1 if P points to an invalid floating point value. */

	#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */

	/* Say how long registers are. */
	/#define REGISTER_TYPE int /

	/* Say how much memory is needed to store a copy of the register set */
	#define REGISTER_BYTES (NUM_REGS*4)

	/* Index within `registers' of the first byte of the space for
	register N. */

	#define REGISTER_BYTE(N) ((N)*4)

	/* Number of bytes of storage in the actual machine representation
	for register N. */

	#define REGISTER_RAW_SIZE(N) (((N) < 16) ? 2 : 4)

	#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N)

	/* Largest value REGISTER_RAW_SIZE can have. */

	#define MAX_REGISTER_RAW_SIZE 4

	/* Largest value REGISTER_VIRTUAL_SIZE can have. */

	#define MAX_REGISTER_VIRTUAL_SIZE 4

	/* Return the GDB type object for the "standard" data type
	of data in register N. */

	#define REGISTER_VIRTUAL_TYPE(N) \
	(REGISTER_VIRTUAL_SIZE(N) == 2 ? builtin_type_unsigned_short : builtin_type_unsigned_long)

	/* Initializer for an array of names of registers.
	Entries beyond the first NUM_REGS are ignored. */

	#define REGISTER_NAMES \
	{"r0","r1","r2", "r3", "r4", "r5", "r6", "r7", \
	"r8","r9","r10","r11","r12","r13","r14","r15", \
	"pc","a", "x", "y", "dbr","d", "s", "p", \
	"ticks","cycles","insts"}

	/* Register numbers of various important registers.
	Note that some of these values are "real" register numbers,
	and correspond to the general registers of the machine,
	and some are "phony" register numbers which are too large
	to be actual register numbers as far as the user is concerned
	but do serve to get the desired values when passed to read_register. */

	#define SP_REGNUM 22
	#define FP_REGNUM 15
	#define NUM_REGS 27
	#define PC_REGNUM 16
	#define P_REGNUM 23

	/* Store the address of the place in which to copy the structure the
	subroutine will return. This is called from call_function.

	We store structs through a pointer passed in R4 */

	#define STORE_STRUCT_RETURN(ADDR, SP) \
	{ write_register (4, (ADDR)); }

	/* Extract from an array REGBUF containing the (raw) register state
	a function return value of type TYPE, and copy that, in virtual format,
	into VALBUF. */

	#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
	memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))


	/* Write into appropriate registers a function return value
	of type TYPE, given in virtual format.

	Things always get returned in R4/R5 */

	#define STORE_RETURN_VALUE(TYPE,VALBUF) \
	write_register_bytes (REGISTER_BYTE(4), VALBUF, TYPE_LENGTH (TYPE))


	/* Extract from an array REGBUF containing the (raw) register state
	the address in which a function should return its structure value,
	as a CORE_ADDR (or an expression that can be used as one). */

	#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) ((CORE_ADDR )(REGBUF))

	/* A macro that tells us whether the function invocation represented
	by FI does not have a frame on the stack associated with it. If it
	does not, FRAMELESS is set to 1, else 0. */

	#define FRAMELESS_FUNCTION_INVOCATION(FI) \
	(frameless_look_for_prologue (FI))

	#define FRAME_CHAIN(FRAME) w65_frame_chain(FRAME)
	#define FRAME_SAVED_PC(FRAME) (w65_frame_saved_pc(FRAME))
	#define FRAME_ARGS_ADDRESS(fi) (fi)->frame
	#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame

	/* Set VAL to the number of args passed to frame described by FI.
	Can set VAL to -1, meaning no way to tell. */

	/* We can't tell how many args there are */

	#define FRAME_NUM_ARGS(fi) (-1)

	/* Return number of bytes at start of arglist that are not really args. */

	#define FRAME_ARGS_SKIP 0

	/* Put here the code to store, into a struct frame_saved_regs,
	the addresses of the saved registers of frame described by FRAME_INFO.
	This includes special registers such as pc and fp saved in special
	ways in the stack frame. sp is even more special:
	the address we return for it IS the sp for the next frame. */

	#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
	frame_find_saved_regs(frame_info, &(frame_saved_regs))

	typedef unsigned short INSN_WORD;

	extern CORE_ADDR w65_addr_bits_remove (CORE_ADDR);
	#define ADDR_BITS_REMOVE(addr) w65_addr_bits_remove (addr)

	#define CALL_DUMMY_LENGTH 10

	/* Discard from the stack the innermost frame,
	restoring all saved registers. */

	#define POP_FRAME pop_frame();


	#define NOP {0xea}

	#define REGISTER_SIZE 4

	#define PRINT_REGISTER_HOOK(regno) print_register_hook(regno)

	#define TARGET_INT_BIT 16
	#define TARGET_LONG_BIT 32
	#define TARGET_PTR_BIT 32