| # Copyright (C) 1995, 1997 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| # This file tests various Chill values, expressions, and types. |
| |
| # This file was written by Wilfried Moser (moser@aut.alcatel.at) |
| # Kurt Fuchs (fuchs_k@aut.alcatel.at) |
| # |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| if [skip_chill_tests] then { continue } |
| |
| set testfile "gch981" |
| set srcfile ${srcdir}/$subdir/${testfile}.ch |
| set binfile ${objdir}/${subdir}/${testfile}.exe |
| if { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } { |
| perror "Couldn't compile ${srcfile}" |
| return -1 |
| } |
| |
| # Set the current language to chill. This counts as a test. If it |
| # fails, then we skip the other tests. |
| |
| proc set_lang_chill {} { |
| global gdb_prompt |
| global binfile objdir subdir |
| |
| verbose "loading file '$binfile'" |
| gdb_load $binfile |
| send_gdb "set language chill\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" {} |
| timeout { fail "set language chill (timeout)" ; return 0 } |
| } |
| |
| send_gdb "show language\n" |
| gdb_expect { |
| -re ".* source language is \"chill\".*$gdb_prompt $" { |
| pass "set language to \"chill\"" |
| send_gdb "break xx_\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" { |
| send_gdb "run\n" |
| gdb_expect -re ".*$gdb_prompt $" {} |
| return 1 |
| } |
| timeout { |
| fail "can't set breakpoint (timeout)" |
| return 0 |
| } |
| } |
| } |
| -re ".*$gdb_prompt $" { |
| fail "setting language to \"chill\"" |
| return 0 |
| } |
| timeout { |
| fail "can't show language (timeout)" |
| return 0 |
| } |
| } |
| } |
| |
| # Testing printing of a specific value. Increment passcount for |
| # success or issue fail message for failure. In both cases, return |
| # a 1 to indicate that more tests can proceed. However a timeout |
| # is a serious error, generates a special fail message, and causes |
| # a 0 to be returned to indicate that more tests are likely to fail |
| # as well. |
| # |
| # Args are: |
| # |
| # First one is string to send_gdb to gdb |
| # Second one is string to match gdb result to |
| # Third one is an optional message to be printed |
| |
| proc test_print_accept { args } { |
| global gdb_prompt |
| global passcount |
| global verbose |
| |
| if [llength $args]==3 then { |
| set message [lindex $args 2] |
| } else { |
| set message [lindex $args 0] |
| } |
| set sendthis [lindex $args 0] |
| set expectthis [lindex $args 1] |
| set result [gdb_test $sendthis ".* = ${expectthis}" $message] |
| if $result==0 {incr passcount} |
| return $result |
| } |
| |
| proc test_power {} { |
| global passcount gdb_prompt |
| |
| verbose "Testing some POWERSET Stuff" |
| set passcount 0 |
| |
| test_print_accept "print v1_power1" {\[e1:e5\]} |
| test_print_accept "print v2_power1" {\[\]} |
| test_print_accept "print SIZE(v1_power1)" "1" |
| |
| gdb_test "set v1_power1 := \[b1\]" "" |
| # if GDB has rejected the improper values, we have to gdb_expect the same! |
| test_print_accept "print v1_power1" {\[e1:e5\]} |
| |
| gdb_test "set v1_power1 := \[a1,a2\]" "" |
| test_print_accept "print v1_power1" {\[e1:e5\]} |
| gdb_test "set v1_power1 := \[b1,b2,b3,e4\]" "" |
| test_print_accept "print v1_power1" {\[e1:e5\]} |
| gdb_test "set v1_power1 := \[e4:e5\]" "" |
| test_print_accept "print v1_power1" {\[e4:e5\]} |
| gdb_test "set v1_power1 := \[e1, e2:e3, e5\]" "" |
| test_print_accept "print v1_power1" {\[e1:e3, e5\]} |
| gdb_test "set v1_power1 := \[e1, e2:e4, e4:e5\]" "" |
| test_print_accept "print v1_power1" {\[e1:e5\]} |
| gdb_test "set v1_power1 := \[e1, e1:e3, e1:e2, e2:e3\]" "" |
| test_print_accept "print v1_power1" {\[e1:e3\]} |
| |
| gdb_test "set v_power2 := \[e2\]" "" |
| test_print_accept "print v_power2" {\[\]} |
| gdb_test "set v_power2 := \[1,2,3\]" "" |
| test_print_accept "print v_power2" {\[\]} |
| gdb_test "set v_power2 := \[e2, b2, b1\]" "" |
| test_print_accept "print v_power2" {\[\]} |
| |
| # Note, that this is a numbered SET, so a1:a3 contains all elements (exept a6) |
| gdb_test "set v_power2 := \[a1:a3, a6:a4, a7:a9\]" "" |
| test_print_accept "print v_power2" {\[a6:a3\]} |
| gdb_test "set v_power2 := \[a1, a4:a6, a9\]" "" |
| test_print_accept "print v_power2" {\[a1, a9\]} |
| gdb_test "set v_power2 := \[a1:a2, a6, a9\]" "" |
| test_print_accept "print v_power2" {\[a6:a2, a9\]} |
| gdb_test "set v_power2 := \[a1, a4, a7:a8, a9:a3\]" "" |
| test_print_accept "print v_power2" {\[a1, a4, a9:a8\]} |
| gdb_test "set v_power2 := \[a1, a4:a8\]" "" |
| test_print_accept "print v_power2" {\[a1, a4:a8\]} |
| gdb_test "set v_power2 := \[a8,a3,a7,a9,a5,a6\]" "" |
| test_print_accept "print v_power2" {\[a6, a5, a9, a7, a3, a8\]} |
| |
| gdb_test "set v_power3 := \[b1:b2,e1\]" "" |
| test_print_accept "print v_power3" {\[b1:b2\]} |
| gdb_test "set v_power3 := \[b1, b3, b6:b7\]" "" |
| test_print_accept "print v_power3" {\[b1, b3, b6:b7\]} |
| gdb_test "set v_power3 := \[b1, b3:b4, b7\]" "" |
| test_print_accept "print v_power3" {\[b1, b3:b4, b7\]} |
| gdb_test "set v_power3 := \[b1, b4:b6, b7\]" "" |
| test_print_accept "print v_power3" {\[b1, b4:b7\]} |
| gdb_test "set v_power3 := \[b1:b7\]" "" |
| test_print_accept "print v_power3" {\[b1:b7\]} |
| gdb_test "set v_power3 := \[b5:b7, b1\]" "" |
| test_print_accept "print v_power3" {\[b1, b5:b7\]} |
| |
| gdb_test "set v_power4 := \[\"b\"\]" "" |
| test_print_accept "print v_power4" {\['b':'x'\]} |
| gdb_test "set v_power4 := \[5\]" "" |
| test_print_accept "print v_power4" {\['b':'x'\]} |
| gdb_test "set v_power4 := \['c':'f','g':'h','o':'t'\]" "" |
| test_print_accept "print v_power4" {\['c':'h', 'o':'t'\]} |
| gdb_test "set v_power4 := \['a','b','c','d','e','f'\]" "" |
| test_print_accept "print v_power4" {\['a':'f'\]} |
| gdb_test "set v_power4 := \['\^(0)':'\^(200)'\]" "" |
| test_print_accept "print v_power4" {\['\^\(0\)':'\^\(200\)'\]} |
| |
| gdb_test "set v_power5 := \[a8\]" "" |
| test_print_accept "print v_power5" {\[2:100\]} |
| gdb_test "set v_power5 := \[4\]" "" |
| test_print_accept "print v_power5" {\[4\]} |
| gdb_test "set v_power5 := \[3:95,9:100,10:107,200:250\]" "" |
| test_print_accept "print v_power5" {\[3:107, 200:250\]} |
| gdb_test "set v_power5 := \[2, 100:120, 350:400\]" "" |
| test_print_accept "print v_power5" {\[2, 100:120, 350:400\]} |
| gdb_test "set v_power5 := \[2:64,65:127,128:256,256:399,400\]" "" |
| test_print_accept "print v_power5" {\[2:400\]} |
| gdb_test "set v_power5 := \[3:95, 99:100, 101:107, 200:250\]" "" |
| test_print_accept "print v_power5" {\[3:95, 99:107, 200:250\]} |
| |
| gdb_test "set v_power6 := \[a8\]" "" |
| test_print_accept "print v_power6" {\[\]} |
| gdb_test "set v_power6 := \[4\]" "" |
| test_print_accept "print v_power6" {\[4\]} |
| gdb_test "set v_power6 := \[3:95, 99:100, 101:107, 200:250\]" "" |
| test_print_accept "print v_power6" {\[3:95, 99:107, 200:250\]} |
| gdb_test "set v_power6 := \[-111:0, 1:112, 11111:22222\]" "" |
| test_print_accept "print v_power6" {\[-111:112, 11111:22222\]} |
| gdb_test "set v_power6 := \[0, 200:4000, 6666:9999\]" "" |
| test_print_accept "print v_power6" {\[0, 200:4000, 6666:9999\]} |
| |
| # gdb_test "set v_power7 := \[a8\]" "" |
| # test_print_accept "print v_power7" {\[2:100\]} |
| # gdb_test "set v_power7 := \[4\]" "" |
| # test_print_accept "print v_power7" {\[4\]} |
| # gdb_test "set v_power7 := \[3:95, 99:100, 101:107, 200:250\]" "" |
| # test_print_accept "print v_power7" {\[3:95, 99:107, 200:250\]} |
| # gdb_test "set v_power7 := \[0, 1000, 1000000, 10000000000\]" "" |
| # test_print_accept "print v_power7" {\[0, 1000, 1000000, 1000000000\]} |
| # gdb_test "set v_power7 := \[-20000:100000, 111111:2222222\]" "" |
| # test_print_accept "print v_power7" {\[-20000:100000, 111111:2222222\]} |
| # gdb_test "set v_power7 := \[\]" "" |
| # test_print_accept "print v_power7" {\[3:95, 99:107, 200:250\]} |
| # gdb_test "set v_power7 := \[2:-500, -501:1, 20:370, -888:-920, 1000:2000, 1800:2500\]\ " "" |
| # test_print_accept "print v_power7" {\[-920:-888, -501:2, 20:370, 1000:2500\]} |
| # test_print_accept "print SIZE(v_power7)" "" |
| |
| |
| runto 58 |
| test_print_accept "print v_set1 IN v1_power1" "TRUE" |
| test_print_accept "print v_set1 IN v2_power1" "FALSE" |
| |
| } |
| |
| |
| |
| # Start with a fresh gdb. |
| |
| gdb_exit |
| gdb_start |
| gdb_reinitialize_dir $srcdir/$subdir |
| |
| gdb_test "set print sevenbit-strings" ".*" |
| |
| |
| if [set_lang_chill] then { |
| # test builtins as described in chapter 6.20.3 Z.200 |
| |
| test_power |
| } else { |
| warning "$test_name tests suppressed." |
| } |
