| /* |
| * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved. |
| * |
| * This software may be freely used, copied, modified, and distributed |
| * provided that the above copyright notice is preserved in all copies of the |
| * software. |
| */ |
| |
| /* -*-C-*- |
| * |
| * $Revision$ |
| * $Date$ |
| * |
| */ |
| #ifndef angsd_hostchan_h |
| #define angsd_hostchan_h |
| |
| /* A temporary sop to older compilers */ |
| #if defined (__NetBSD__) || defined (unix) |
| # ifndef __unix /* (good for long-term portability?) */ |
| # define __unix 1 |
| # endif |
| #endif |
| |
| /* struct timeval */ |
| #if defined(__unix) || defined(__CYGWIN__) |
| # include <sys/time.h> |
| #else |
| # include "winsock.h" |
| # include "time.h" |
| #endif |
| |
| #include "chandefs.h" |
| #include "adperr.h" |
| #include "devsw.h" |
| |
| /* |
| * asynchronous processing modes |
| */ |
| enum AsyncMode |
| { |
| async_block_on_nothing, |
| async_block_on_read, |
| async_block_on_write |
| }; |
| |
| #ifndef __cplusplus |
| typedef enum AsyncMode AsyncMode; |
| #endif |
| |
| /* |
| * prototype for channels callback function |
| */ |
| typedef void (*ChannelCallback)(Packet *packet, void *state); |
| |
| /* |
| * Function: Adp_initSeq |
| * Purpose: initialise the channel protocol and sequence numbers |
| * |
| * Params: none |
| * |
| * Returns: Nothing |
| */ |
| extern void Adp_initSeq(void); |
| |
| /* |
| * Function: Adp_addToQueue |
| * Purpose: chain a Packet to the end of a linked list of such structures |
| * |
| * Params: |
| * In/Out: head Head of the linked list |
| * |
| * newpkt Packet to be chained onto the list |
| * |
| * Returns: Nothing |
| */ |
| extern void Adp_addToQueue(Packet **head, Packet *newpkt); |
| |
| /* |
| * Function: removeFromQueue |
| * Purpose: remove a Packet from the head of a linked list of such structures |
| * |
| * Params: |
| * In/Out: head Head of the linked list |
| * |
| * Returns: Old head from the linked list |
| * |
| * Post-conditions: Second element in the list will be the new head. |
| */ |
| |
| extern Packet *Adp_removeFromQueue(Packet **head); |
| |
| /* |
| * Set log file and Enable/disable logging of ADP packets to file. |
| */ |
| |
| void Adp_SetLogfile(const char *filename); |
| void Adp_SetLogEnable(int logEnableFlag); |
| |
| /* |
| * Function: Adp_OpenDevice |
| * Purpose: Open a device to use for channels communication. This is a |
| * very thin veneer to the device drivers: what hostchan.c |
| * will do is call DeviceMatch for each device driver until it |
| * finds a driver that will accept name and arg, then call |
| * DeviceOpen for that device. |
| * |
| * Pre-conditions: No previous open is still active |
| * |
| * Params: |
| * Input: name Identifies which device to open. This can either be |
| * a host specific identifier (e.g. "/dev/ttya", |
| * "COM1:"), or a number which is used to refer to |
| * `standard' interfaces, so "1" would be the first host |
| * interface, "2" the second, and so on. |
| * |
| * arg Driver specific arguments. For example, some serial |
| * drivers accept speed and control arguments such as |
| * "9600" or "19200/NO_BREAK". These arguments are |
| * completely free-form: it is the individual drivers |
| * which do the necessary interpretation. |
| * |
| * heartbeat_on Incicates if the heartbeat is configured to be |
| * used or not, true if it is, false otherwise |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_device_not_known, |
| * adp_device_open_failed |
| * adp_device_already_open |
| */ |
| AdpErrs Adp_OpenDevice(const char *name, const char *arg, |
| unsigned int heartbeat_on); |
| |
| /* |
| * Function: Adp_CloseDevice |
| * Purpose: Close the device used for channels communication. |
| * |
| * Params: None |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_device_not_open |
| */ |
| AdpErrs Adp_CloseDevice(void); |
| |
| /* |
| * Function: Adp_Ioctl |
| * Purpose: Perform miscellaneous control operations on |
| * the device used for channels communication. |
| * This is a minimal veneer to DevSW_Ioctl. |
| * |
| * Params: |
| * Input: opcode Reason code indicating the operation to perform. |
| * In/Out: args Pointer to opcode-sensitive arguments/result space. |
| * |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_device_not_open, adp_failed |
| */ |
| AdpErrs Adp_Ioctl(int opcode, void *args); |
| |
| /* |
| * Function: Adp_ChannelRegisterRead |
| * Purpose: Register a callback function for received packets on a given |
| * channel |
| * |
| * Params: |
| * Input: chan The channel the callback function is for. |
| * |
| * cbfunc The callback function. If NULL, then the current |
| * callback is removed. |
| * |
| * cbstate State pointer to pass into the callback function |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_device_not_open |
| * adp_bad_channel_id |
| * |
| * Post-conditions: The callback function is responsible for freeing the |
| * packet that is passed to it, when that packet is |
| * no longer needed. |
| */ |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| |
| extern AdpErrs Adp_ChannelRegisterRead(const ChannelID chan, |
| const ChannelCallback cbfunc, |
| void *cbstate); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| /* |
| * Function: Adp_ChannelRead |
| * Purpose: Wait until a packet has been read for a given channel, and |
| * then return it. Callbacks for other channels are still |
| * active while this read is blocking. |
| * |
| * Pre-conditions: No callback has been already been registered for |
| * the channel. |
| * |
| * Params: |
| * Input: chan The channel to read. |
| * |
| * Output: packet The received packet. |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_device_not_open |
| * adp_bad_channel_id |
| * adp_callback_already_registered |
| * |
| * Post-conditions: The calling function is responsible for freeing the |
| * received packet, when that packet is no longer |
| * needed. |
| */ |
| AdpErrs Adp_ChannelRead(const ChannelID chan, Packet **packet); |
| |
| /* |
| * Function: Adp_ChannelWrite |
| * Purpose: Write a packet to the given channel |
| * |
| * Pre-conditions: Channel must have been previously opened. |
| * |
| * Params: |
| * Input: chan The channel to write. |
| * |
| * packet The packet to write. |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_device_not_open |
| * adp_bad_channel_id |
| * |
| * Post-conditions: The packet being written becomes the "property" of |
| * Adp_ChannelWrite, which is responsible for freeing |
| * the packet when it is no longer needed. |
| */ |
| AdpErrs Adp_ChannelWrite(const ChannelID chan, Packet *packet); |
| |
| /* |
| * Function: Adp_ChannelWriteAsync |
| * Purpose: Write a packet to the given channel, but don't wait |
| * for the write to complete before returning. |
| * |
| * Pre-conditions: Channel must have been previously opened. |
| * |
| * Params: |
| * Input: chan The channel to write. |
| * |
| * packet The packet to write. |
| * |
| * Returns: |
| * OK: adp_ok |
| * Error: adp_device_not_open |
| * adp_bad_channel_id |
| * |
| * Post-conditions: The packet being written becomes the "property" of |
| * Adp_ChannelWrite, which is responsible for freeing |
| * the packet when it is no longer needed. |
| */ |
| AdpErrs Adp_ChannelWriteAsync(const ChannelID chan, Packet *packet); |
| |
| /* |
| * Function: Adp_AsynchronousProcessing |
| * Purpose: This routine should be called from persistent any idle loop |
| * to give the data I/O routines a chance to poll for packet |
| * activity. Depending upon the requested mode, this routine |
| * may, or may not, block. |
| * |
| * Params: |
| * Input: mode Specifies whether to block until a complete packet |
| * has been read, all pending writes have completed, |
| * or not to block at all. |
| * |
| * Returns: Nothing. |
| */ |
| void Adp_AsynchronousProcessing(const AsyncMode mode); |
| |
| /* |
| * prototype for DC_APPL packet handler |
| */ |
| typedef void (*DC_Appl_Handler)(const DeviceDescr *device, Packet *packet); |
| |
| /* |
| * install a handler for DC_APPL packets (can be NULL), returning old one. |
| */ |
| DC_Appl_Handler Adp_Install_DC_Appl_Handler(const DC_Appl_Handler handler); |
| |
| /* |
| * prototype for asynchronous processing callback |
| */ |
| typedef void (*Adp_Async_Callback)(const DeviceDescr *device, |
| const struct timeval *const time_now); |
| |
| /* |
| * add an asynchronous processing callback to the list |
| * TRUE == okay, FALSE == no more async processing slots |
| */ |
| bool Adp_Install_Async_Callback( const Adp_Async_Callback callback_proc ); |
| |
| /* |
| * delay for a given period (in microseconds) |
| */ |
| void Adp_delay(unsigned int period); |
| |
| #endif /* ndef angsd_hostchan_h */ |
| |
| /* EOF hostchan.h */ |