| 2002-07-13 Andrew Cagney <ac131313@redhat.com> |
| |
| * cpu.h: Mark file obsolete. |
| * sim-main.h, sim-calls.c, engine.c, cpu.c, alu.h: Ditto. |
| * dc-short, ic-d30v, d30v-insns, Makefile.in: Ditto. |
| |
| 2002-06-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 2000-07-05 Nick Clifton <nickc@cygnus.com> |
| |
| * d30v-insns: Change minimum loop size limit to 0x10. |
| |
| Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 2000-04-12 Frank Ch. Eigler <fche@redhat.com> |
| |
| * cpu.h (GPR_CLEAR): New macro. |
| (GPR_SET): Removed macro. |
| |
| Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Sep 1 11:38:21 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns: Cast CIA to LONG in printfs. |
| |
| Tue Aug 31 01:32:22 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * cpu.h (unqueue_writes): Add declaration. |
| |
| 1999-05-27 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (do_repeat): Print a warning if a REPEAT or REPEATI |
| instruction loop is too small. |
| |
| 1999-05-08 Felix Lee <flee@cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 1999-03-16 Martin Hunt <hunt@cygnus.com> |
| From Frank Ch. Eigler <fche@cygnus.com> |
| |
| * cpu.h (mvtsys_left_p): New flag for MVTSYS instruction history. |
| * d30v-insns (mvtsys): Set this flag instead of left_kills_right_p. |
| (do_sath): Detect MVTSYS by new flag. |
| * engine.c (unqueue_writes): Detect MVTSYS by new flag. |
| (do_2_short, do_parallel): Initialize new flag. |
| |
| 1999-02-26 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * tconfig.in (SIM_HANDLES_LMA): Make it so. |
| |
| 1999-01-12 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * engine.c (unqueue_writes): Make PSW conflict resolution code |
| conditional - disable it for MVTSYS || insn case. |
| |
| 1999-01-11 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_sath): Drain PSW write queue before PSW_S_FLAG |
| update. |
| * engine.c (unqueue_writes): Make non-static. Remove PSW_V/VA |
| special case. |
| (do_parallel): Don't drain PSW write queue for MVTSYS || insn. |
| |
| 1999-01-07 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_ld2h): Sign-extend loaded half-words. |
| |
| 1999-01-05 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_ld2h): Read memory in word units. |
| (do_ld4bh): Ditto. Correct sign extension. |
| (do_ld4bhu): Ditto. |
| (do_st2h): Write memory in word units. |
| (do_st4hb): Ditto. |
| (st4hb): Correct mnemonic in igen template. |
| |
| 1998-12-08 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns: (do_ld2h): Don't update R0 nor R1 for double-word insn. |
| (do_ld2w): Ditto. |
| (do_ld4bh): Ditto. |
| (do_ld4bhu): Ditto. |
| (do_mulx2h): Ditto. |
| |
| 1998-12-03 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_repeat): Don't set RP for repeat count 1. |
| |
| 1998-12-03 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_src): Treat shift count -32 naturally instead of |
| producing zero result. |
| |
| 1998-11-22 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_src): Limit SRC shift count to -32 .. 31. |
| |
| 1998-11-16 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (dbt): Defer PSW/DPSW update with new DID_TRAP code 2. |
| * engine.c (unqueue_writes): Perform DBT processing on PSW/DPSW here. |
| |
| 1998-11-12 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * cpu.h (_sim_cpu): Removed is_delayed_call field, and associated |
| RPT_IS_CALL macro. |
| * sim-calls.c (sim_create_inferior): Don't initialize is_delayed_call. |
| * d30v-insns (do_dbra): Don't clear RPT_IS_CALL. (do_dbrai): Ditto. |
| (do_djmp): Ditto. (do_djmpi): Ditto. (do_repeat): Ditto. |
| * d30v-insns (do_dbsr): Don't set RPT_IS_CALL, but set R62 instead. |
| (do_dbsri): Ditto. (do_djsr): Dito. (do_djsri): Ditto. |
| * engine.c (sim_engine_run): Remove conditional setting of R62 based |
| upon RPT_IS_CALL. |
| |
| 1998-11-08 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * sim-calls.c (sim_open): Add dummy memory range over control |
| register region (0x40000000..0x4000FFFF). |
| |
| 1998-11-06 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_mvfacc): Use loop to limit shift count to 63 .. 0. |
| |
| Tue Oct 13 11:01:16 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_sra,do_srah,do_srl,do_srlh): Make shift |
| count -32 to produce zero result. |
| (do_src): Ditto for shift count == -64. |
| |
| Mon Oct 12 23:04:11 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (ROT): Use 0x1f bit mask for rotate count masking. |
| (do_sra,do_srl): Use loop to limit shift count to -32 .. 31. |
| (do_srah,do_srlh): Use loop to limit shift count to -32 .. 31. |
| (sra2h,srl2h): Use loop to limit shift count to -16 .. 15. |
| (do_src): Use loop to limit shift count to -64 .. 63. |
| |
| Fri Oct 9 16:46:52 1998 Doug Evans <devans@canuck.cygnus.com> |
| |
| * sim-calls.c (get_insn_name): New fn. |
| (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS. |
| * sim-main.h (MAX_INSNS,INSN_NAME): Delete. |
| |
| Mon Sep 28 10:43:28 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_sra,do_srah,do_srl,do_srlh,ROT,do_src): Use |
| correct MSB bit numbers for sign extension masks. |
| |
| Fri Sep 25 17:32:27 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * engine.c (do_parallel): Unqueue writes if MU instruction was |
| a MVTSYS, as identified by its left_kills_right_p side-effect. |
| |
| Fri Sep 25 12:31:34 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_sra,do_srah,do_srl,do_srlh,ROT,do_src): Mask |
| shift/rotate counts to number of bits in width of operand; no |
| longer saturate at maxima. |
| |
| Tue Jul 14 18:39:23 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * cpu.h (left_kills_right_p): New flag for non-branch instructions |
| that, when executed in left slot of a -> sequential pair, kill the |
| right slot. |
| * d30v-insns (mvtsys): Set flag for PSW/PSWh/PSWl/FLAG operands. |
| * engine.c (do_2_short): Respect flag. |
| |
| Thu Jun 4 16:48:58 1998 David Taylor <taylor@texas.cygnus.com> |
| |
| * d30v-insns (do_trap): don't save the bPSW and PSW based on |
| current values because an instruction done in parallel with |
| the trap might change them, instead set a flag do that |
| unqueue_writes will take care of it. |
| * engine.c (unqueue_writes): finish trap handling |
| * cpu.h (_sim_cpu): add new field did_trap and a macro DID_TRAP |
| to make use of it; set by do_trap, tested and cleared by |
| unqueue_writes. |
| |
| Tue May 19 16:07:04 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * engine.c (unqueue_writes): Suppress the all enqueued writes to |
| the same flags in PSW except the last. |
| |
| Fri May 15 11:38:59 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (RETI): Correct instruction spelling to "reit". |
| |
| Thu May 14 09:34:20 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (dbt): Handle DBT at end of repeat block. |
| (do_trap, dbt): Clear PSW_RP if at end of repeat block. |
| |
| Thu May 14 07:41:41 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * engine.c (sim_engine_run): Trigger DDBT based on previous PC, |
| instead of next PC. |
| |
| Wed May 13 11:03:40 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * engine.c (sim_engine_run): Move DDBT handling after instruction |
| decode/execute stage. |
| |
| Tue May 12 12:14:53 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_sat*): Correct "saturate to 0 bits" patch to |
| properly handle negative saturation inputs. |
| |
| Tue May 12 11:11:26 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * engine.c (sim_engine_run): Decrement RPT_C only under more |
| restricted conditions. |
| |
| Mon May 11 17:33:46 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_sat*): Make "saturate to 0 bits" pass through data |
| unchanged. |
| |
| Mon May 11 16:27:04 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * engine.c (sim_engine_run): Implement DDBT (debugger debug trap) |
| functionality. |
| |
| Fri May 8 16:44:19 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_trap): Set bPC to RPT_S if trap is last |
| instruction in repeat block. |
| (bsr*/jsr*): Set R62 (LINK) to RPT_S if subroutine branch |
| is last instruction in repeat block. |
| |
| Fri May 8 11:06:50 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_sath): Query/update F4/PSW_S using proper flag |
| macro. |
| * cpu.h (PSW_S_FLAG): New flag number for PSW_S status bit. |
| |
| Wed May 6 19:40:56 1998 Doug Evans <devans@canuck.cygnus.com> |
| |
| * sim-main.h (INSN_NAME): New arg `cpu'. |
| |
| Fri May 1 14:24:30 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns: Fix parameter list to sim_engine_abort. |
| |
| Thu Apr 30 14:28:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * d30v-insns (do_sath): Add additional argument that determines |
| whether or not the F4 (PSW_S) bit in the PSW is updated. |
| (SAT2H): Do not update PSW_S bit. |
| (SATHp): Do update PSW_S bit. |
| |
| Tue Apr 28 23:36:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * d30v-insns (SRAHp, SRLHp): Immediate values are signed 6 bit |
| values, not 5 bit values. |
| |
| Wed Apr 29 12:57:55 1998 Frank Ch. Eigler <fche@cygnus.com> |
| |
| * d30v-insns (do_incr): Check modular arithmetic limits after |
| postincrement/postdecrement, rather than before, to match |
| erroneous hardware behavior. |
| |
| Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Apr 27 19:42:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * d30v-insns (do_trap): Clear all bits in PSW except SM and DB. |
| |
| Mon Apr 27 14:55:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * d30v-insns (do_mulx2h): Low order results go in ra+1, high |
| order in ra. |
| |
| Mon Apr 27 14:42:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * d30v-insns (do_mulx2h): Rewrite to do proper 32 bit signed |
| multiply of high and low fields from operands. |
| |
| Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Sun Apr 26 15:20:20 1998 Tom Tromey <tromey@cygnus.com> |
| |
| * acconfig.h: New file. |
| * configure.in: Reverted change of Apr 24; use sinclude again. |
| |
| Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Fri Apr 24 11:20:00 1998 Tom Tromey <tromey@cygnus.com> |
| |
| * configure.in: Don't call sinclude. |
| |
| Wed Apr 22 21:23:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * ic-d30v (RbU, RcU): Unsigned versions of Rb and Rc. |
| * d30v-insns (MVTACC): Use new RbU and RcU macros. |
| |
| Wed Apr 22 20:52:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * ic-d30v (RbHU,RbLU): Unsigned versions of RbH and RbL. |
| * d30v-insns (SRL2H): Use new RbHU and RbLU macros instead of |
| RbH and RbL. |
| |
| Mon Apr 13 16:59:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * d30v-insns (do_srl): Avoid undefined behavior of host compiler |
| when shifting left by more than 31 bits. |
| |
| Tue Apr 7 18:09:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * engine.c (sim_engine_run): Remove at_loop_end variable. Add |
| rp_was_set and rpt_c_was_nonzero variables. Major restructuring of |
| code before and after instruction execution to properly handle state |
| of the RP bit in the PSW, the value in RPT_C, and other loop related |
| problems. |
| |
| Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Apr 3 15:26:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * d30v-insns (do_trap): Use offset from EIT_VB rather than hardcoded |
| BASE_ADDRESS constant. |
| * cpu.h (BASE_ADDRESS): Remove constant not used any longer. |
| |
| Fri Apr 3 14:42:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * cpu.h (EIT_VB): Define macro to access EIT_VB register. |
| (EIT_VB_DEFAULT): Define value of EIT_VB register after reset. |
| * sim-calls.c (sim_create_inferior): Set EIT_VB to EIT_VB_DEFAULT. |
| |
| Tue Mar 31 19:00:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * d30v-insns (do_dbrai): RPT_S is cia plus pcdisp rather than |
| just pcdisp. |
| |
| Mon Mar 30 20:30:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * engine.c (sim_engine_run): Add at_loop_end. Rework end of loop |
| code to use this to both reset PSW_RP when needed and to set PC |
| to RPT_S for another pass through the loop. |
| |
| Mon Mar 30 16:12:00 1998 Fred Fish <fnf@cygnus.com> |
| |
| * engine.c (sim_engine_run): Change code that handles RPT_* regs |
| and PSW_RP bit in PSW so that PSW_RP is always set while executing |
| the loop and loop terminates upon completion of the pass for which |
| RPT_C is zero. More closely follow logic in architecture manual. |
| |
| Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Thu Mar 19 00:25:43 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_open): Move memory-region commands back to |
| before the call to sim_parse_args. |
| (d30v_option_handler): Implement extmem-size option using |
| memory-delete and memory-region commands. |
| |
| * sim-calls.c (d30v_option_handler): Use ANSI-C argument list, |
| correct number and type of arguments. |
| |
| Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Mar 11 13:56:32 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * alu.h (IMEM, MEM, STORE): Replace sim_core_*_map with exec_map, |
| read_map and write_map resp. |
| |
| * cpu.c (d30v_read_mem, d30v_write_mem): Ditto. |
| |
| Mon Mar 2 13:34:08 1998 Fred Fish <fnf@cygnus.com> |
| |
| * d30v-insns (do_repeat): Abort repeat instructions that have |
| a repeat count of zero. |
| |
| Fri Feb 27 18:44:12 1998 Doug Evans <devans@canuck.cygnus.com> |
| |
| * sim-calls.c (sim_open): Update call to sim_add_option_table. |
| |
| Thu Feb 26 18:34:31 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_info): Delete. |
| |
| Wed Feb 25 14:44:58 1998 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (mvtsys): If moving to EIT_VB register, and with |
| valid bits. Optimize code somewhat. |
| |
| * cpu.h (eit_vector_base_cr): New CR we need to special case. |
| (EIT_VALID): Valid bits for EIT_VB register. |
| |
| * d30v-insns (mv{f,t}sys): When moving to/from PSWH, the value is |
| in the low 16 bits of the register. |
| |
| * d30v-insns (do_sra): Use a common WRITE32_QUEUE to write back |
| results. |
| (do_sr{a,l}h): Do shift in 32 bits, only truncate when writing |
| result back to the registers. |
| |
| Tue Feb 24 18:09:52 1998 Fred Fish <fnf@cygnus.com> |
| |
| * Makefile.in (tmp-igen): Use -G gen-zero-r0 option to force |
| r0 to always be zero. |
| * cpu.h (GPR_SET): Define. |
| |
| Tue Feb 24 14:12:57 1998 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (do_sath): Do saturation in 32 bits, before |
| converting to 16. |
| (sat{,2h,z,hp}): Use imm_5, not imm to get proper zero extend. |
| (do_sath_p): Delete, no longer used. |
| (sathp): Call do_sath, not do_sath_p. |
| |
| Mon Feb 23 15:55:14 1998 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (illegal,wrong_slot): Print \n after PC and before we |
| call sim_engine_halt. |
| (sr{a,l}hp): Implement missing instructions. |
| (do_trap): Print high order PSW bits in human readable fashion. |
| (do_{dbra{,i},dbsr{,i},djmp{,i},djsr{,i},repeat}): Set PSW bit RP. |
| |
| * alu.h (PSW_SET_QUEUE): New macro to set PSW bits. |
| |
| * engine.c (sim_engine_run): Check for RP bit being set, not RPT_C |
| being > 0. If RPT_C is decremented to 0, clear PSW RP bit. |
| |
| Fri Feb 20 10:13:34 1998 Fred Fish <fnf@cygnus.com> |
| |
| * cpu.h (BASE_ADDRESS): Change from 0xfffff000 to 0xfffff020. |
| |
| Tue Feb 17 12:39:52 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_store_register, sim_fetch_register): Pass in |
| length parameter. Return -1. |
| |
| Fri Feb 6 17:39:54 1998 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (do_dbrai): Correct typo, use shift, not comparison. |
| |
| Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Jan 30 08:29:20 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * engine.c (sim_engine_run): Add parameter nr_cpus. |
| |
| Fri Jan 30 17:09:37 1998 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (jsrtzr): Check for register == 0, not != 0. |
| |
| Wed Jan 21 17:52:04 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * engine.c (do_stack_swap): Make type of new_sp unsigned. |
| |
| Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Jan 5 16:04:17 1998 Andrew Cagney <cagney@sanguine.cygnus.com> |
| |
| * sim-calls.c (sim_info): Call profile_print. |
| |
| * sim-main.h: Enable instruction profiling. |
| |
| Thu Dec 18 12:21:38 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * alu.h (ALU{16,32}_END): Change setting PSW to only set the carry |
| and overflow bits. Don't look at the current value of PSW. |
| (PSW_FLAG_SET_QUEUE): Only queue up setting the particular bit in |
| question. Don't look at the current value of PSW. |
| |
| * d30v-insns: All instructions that set the PSW, will only queue |
| up the particular bits in question that were set by the |
| instruction. Don't look at the current value of PSW. |
| |
| Wed Dec 17 11:41:44 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * cpu.h (PSW_VALID): Allow EA/DB to be set in the PSW. |
| (DPSW_VALID): Like PSW_VALID, but it allows the DS bit to be set. |
| |
| * engine.c (trace_alu32): When changing BPSW/DPSW, print the |
| special PSW bits. |
| |
| * d30v-insns (do_cmp_cc): Fix cmpps and cmpng. |
| (do_cmp{,u}_cc): Print which cc value was used if not in switch |
| statement. |
| (do_cmpu_cc): Remove illegal cases CMPU{EQ,NE,PS,NG}. |
| (mvtsys): When setting BPSW or DPSW, and with DPSW_VALID. |
| |
| Tue Dec 16 18:17:26 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (mulx2h): Add missing instruction. Complain if |
| register is not even. |
| (do_{add,sub}h_ppp): Get correct high/low values. Also correctly |
| handle short immediates. |
| (do_ld{2w,4bh}): Don't load r0 if ra == 0. |
| |
| * engine.c (d30v_interrupt_event): Remove unused variable |
| (unqueue_writes): Ditto. |
| |
| Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Sat Dec 13 23:40:17 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * cpu.h (_write{32,64}): New structures for keeping track of |
| queued writes to registers. |
| (_sim_cpu): Add _write{32,64} structures. Make is_delayed_call |
| unsigned32 also. |
| (WRITE{32,64}*): New macros for queueing up writes to registers. |
| |
| * alu.h (ALU16_END): Take field that says whether we are setting |
| the high or low half word. Queue up changes to registers. |
| (ALU32_END): Queue up changes to registers. |
| (PSW_FLAG_SET_QUEUE): Like PSW_FLAG_SET, except queues it up. |
| |
| * sim-main.h (do_stack_swap): Remove declaration. |
| |
| * engine.c (do_stack_swap): Make static. |
| (unqueue_writes): New function to unqueue all changes to 32 and 64 |
| bit registers in order. Implement --trace-alu. Reset high water |
| marks for # of queued registers. If PSW changed, possibly update |
| stack pointer. |
| (do_{long,2_short,parallel}): Unqueue register writes at the |
| appropriate time. |
| |
| * d30v-insns: Modify all insns to queue changes to registers, |
| rather than do them immediately so that parallel instructions get |
| the right values for inputs. Rewrite 16 bit operations to be done |
| in terms of masked 32 bit registers. Don't call do_stack_swap any |
| more here. |
| |
| Thu Dec 11 10:06:02 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * sim-calls.c (d30v_option_handler): Add support for --extmem-size |
| to size external memory. |
| (sim_open): Ditto. Default if no --extmem-size option is 8 meg. |
| |
| Wed Dec 10 01:08:24 1997 Jim Blandy <jimb@zwingli.cygnus.com> |
| |
| * d30v-insns (do_rot2h): Clip rotate amounts to four bits. The |
| upper bits, and the sign of the rotation amount, are red herrings. |
| (do_sra, do_srl): Handle shifts greater than 32 bits. |
| (do_srah, do_sral): Properly sign-extend value and shift amount. |
| Handle shifts larger than 16 bits. |
| |
| Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Dec 1 15:10:44 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (do_sub2h): For short instruction, correctly |
| dupplicate lower 16 bits of immediate in upper 16 bits. |
| (sat2z): Fix typo that ignored the upper half of the register. |
| (do_satz): If < 0, set *ra to 0, if not call do_sat. |
| (mvtsys): Before setting PSW, and with PSW_VALID. |
| |
| * cpu.h (PSW_VALID): Mask for bits in PSW that is valid. |
| |
| Mon Dec 1 15:05:03 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns (do_trap): Pacify GCC - correct type of %ld arg in |
| printf, return dummy at end. |
| |
| Mon Dec 1 15:05:03 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns (do_add, do_addh_ppp, do_adds): Replace ALU_ADD with |
| ALU_ADDC. |
| (do_addc): Replace ALU_SET_CARRY / ALU_ADD_CA with ALU_ADDC_C. |
| (do_sub, do_subh_ppp): Replace ALU_SUB with ALU_SUBB. |
| (do_subb): Replace ALU_SET_CARRY / ALU_SUB_CA with ALU_SUBB_B. |
| |
| * alu.h (ALU16_END): Use ALU16_HAD_CARRY_BORROW instead of |
| ALU16_HAD_CARRY. |
| (ALU32_END): Ditto. |
| |
| * sim-main.h (string.h, strings.h): Include. |
| |
| * sim-calls.c: Delete inclusion of string.h and strings.h. |
| |
| Sun Nov 30 17:29:25 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * configure.in (--enable-sim-trapdump): New switch to control |
| whether traps 0..30 dump out the registers or do the real trap. |
| * configure: Regenerate. |
| |
| * Makefile.in (SIM_EXTRA_CLFAGS): Add -DTRAPDUMP={0,1} if |
| appropriate --{en,dis}able-sim-trapdump is done. |
| |
| * sim-calls.c (OPTION_TRACE_CALL): Rename from OPTION_CALL_TRACE. |
| (OPTION_TRACE_TRAPDUMP): New option for --trace-trapdump. |
| (d30v_option_handler): Add support for --trace-trapdump. |
| (d30v_options): Ditto. |
| (sim_open): Ditto. |
| |
| * d30v-insns (do_trap): Do register dump if --trace-trapdump and |
| not the system call trap. Remove support for calling old function |
| sim_io_syscalls. |
| |
| Sat Nov 29 18:54:55 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * cpu.h (_sim_cpu): Add trace_call_p, trace_action fields. |
| (TRACE_CALL_P): Non-zero if --trace-call. |
| (TRACE_ACTION): Non-zero if there is a tracing action at the end |
| of processing an instruction boundary. |
| (TRACE_ACTION_{CALL,RETURN}): Bits to say trace call & return. |
| (d30v_next_insn): Delete, now trace_action field in cpu state. |
| |
| * cpu.c (d30v_next_insn): Delete, now trace_action field in cpu |
| state. |
| (return_occurred): Minimum saved register to check is now 34. |
| |
| * engine.c (sim_engine_run): Change call tracing to use |
| trace_action field in cpu state. |
| |
| * sim-calls.c (d30v_option_handler): Handle d30v specific options. |
| (d30v_options): D30V specific options. Right now, --trace-call. |
| (sim_open): Register d30v specific options. |
| |
| * d30v-insns (call, return insns): Move --trace-debug call/return |
| tracing action to d30v specific --trace-call option. |
| |
| Fri Nov 28 20:12:48 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * cpu.h (CREG): Rename from CR. |
| |
| * d30v-insns (do_{addc,subb}): Explicitly import the carry bit. |
| (do_trap): Use CREG, not CR. Switch to using cb_syscall. |
| |
| Thu Nov 27 19:25:43 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * cpu.h (ACC): Define as short cut to accumulators. |
| |
| * d30v-insns (do_rot): Delete explicit function, use ROT32 to do |
| rotate instruction. |
| (do_trap): Make trap 30 print out accumulators and first 16 |
| control registers as well. |
| (do_avg): Sign extend to 64 bit type before doing add/shift. |
| (do_avg2h): Sign extend 16 bit chunks before doing add/shift. |
| |
| Wed Nov 26 15:20:24 1997 Doug Evans <devans@canuck.cygnus.com> |
| |
| * Makefile.in (NL_TARGET): Define. |
| |
| Wed Nov 26 16:55:38 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * cpu.h (d30v_next_insn): New flag for things we are supposed to |
| trace between instruction words. |
| ({call,return}_occurred): Remove index argument. |
| (d30v_{read,write}_mem): Add declarations. |
| |
| * cpu.c (d30v_next_insn): New flag for things we are supposed to |
| trace between instruction words. |
| ({call,return}_occurred): Remove index argument. |
| (d30v_{read,write}_mem): New functions for reading/writing |
| simulated memory in the new common system call support. |
| |
| * d30v-insns: Set emacs C mode. |
| (call/return insns): Set bit to trace call at instruction |
| boundary, rather than doing it here. |
| (do_trap): Set up to use new common system call interface. |
| |
| * engine.c (sim_engine_run): If d30v_next_insn is non zero, do |
| function call/return tracing. |
| |
| Mon Nov 24 16:40:49 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (bnot): Correctly reset bit in question. |
| (do_trap): Use common system call emulation support, rather than |
| our home grown support. |
| |
| Sun Nov 23 22:47:20 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (mvfacc): Immediate field is unsigned, allowing |
| shifts of up to 63 to be encoded. Also do shift signed, rather |
| than unsigned. |
| |
| * ic-d30v (IMM_6S): Add field for 6 bit unsigned constants. |
| |
| * d30v-insns (cmpu): Short cmpu zero extends immediate, not sign |
| extends. |
| |
| Sat Nov 22 19:04:34 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns (illegal, wrong_slot): Replace SIGILL with |
| SIM_SIGILL. |
| |
| * sim-calls.c (signal.h): Do not include, replaced by |
| sim-signal.h. |
| |
| * sim-main.h (signal.h): Do not include, include sim-signal.h |
| instead. |
| |
| Fri Nov 21 09:33:54 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * cpu.c (call_occurred): Use ZALLOC instead of xmalloc. |
| (return_occurred): Use zfree instead of free. |
| |
| Wed Nov 19 13:28:09 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * Makefile.in ({l,s}_{support,semantics}.o): Depend on the include |
| files in $(ENGINE_H). |
| |
| * d30v-insns (do_{add,addc,sub,subb}): ALU_{ADD,SUB}_CA now takes |
| a VAL argument to add/subtract along with the carry. |
| |
| Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com> |
| |
| * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS). |
| |
| Tue Nov 18 13:56:15 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (do_trap): Change to new system call numbers. Add |
| read emulation. |
| |
| Mon Nov 17 14:43:45 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (mulx): Add mulx instruction. |
| |
| Sun Nov 16 19:06:56 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * cpu.c ({call,return}_occurred): New trace functions to mark |
| function calls and returns and check whether all saved registers |
| really were saved. |
| |
| * cpu.h ({call,return}_occurred): Add declaration. |
| |
| * d30v-insns ({bsr, jsr} patterns): Call call_occurred if |
| --trace-debug to trace function calls. |
| (jmp register pattern): If this is a jump r62 and --trace-debug, |
| call return_occurred to trace function calls. |
| (bsr{tnz,tzr}): Move setting r62 inside conditional against reg. |
| (do_ld2w): Grab memory in 64-bit chunk, to check alignment. |
| (do_st2w): Ditto. |
| |
| Sat Nov 15 20:57:57 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns: Undo changes from Nov. 11, allowing for odd register |
| pairs, since the machine doesn't support such usage. Trap on odd |
| registers, rather than give a warning. Keep do_src and do_trap |
| changes. |
| |
| Fri Nov 14 11:59:29 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns (do_trap): Pacify compiler warnings for printf calls. |
| |
| Tue Nov 11 18:26:03 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (not_r63_reg): Rename from make_even_reg, only check |
| for register being r63. Change callers ld2{h,w}, ld4bh{,u}. |
| (get_reg_not_r63): Rename from get_even_reg, and only check for |
| register r63. Change callers st2{w,h}, st4b. |
| (do_src): Correct register pair for shift left. |
| (do_trap): Temporarily make trap 30 print out the registers. |
| |
| Tue Nov 4 08:51:22 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * d30v-insns (do_trap): Make trap 31 be used for system calls. |
| Add primitive write and exit system calls. |
| |
| * Makefile (FILTER): New make variable to filter out known igen |
| warnings. |
| (tmp-igen): Add $(FILTER) on all 3 invocations of igen to filter |
| out warnings that should be ignored by default. |
| |
| Fri Oct 31 19:36:51 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_open): Change EIT to memory region. |
| |
| Fri Oct 17 16:51:31 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * alu.h (ALU16_END): Get result from ALU16_OVERFLOW_RESULT. |
| (ALU32_END): Get result from ALU32_OVERFLOW_RESULT. |
| |
| Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Sep 29 15:23:35 1997 Stu Grossman <grossman@babylon-5.cygnus.com> |
| |
| * d30v-insns (MVFSYS MVTSYS): Fix bit patterns so that these |
| instructions get recognised. |
| |
| Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Sep 24 17:51:43 1997 Stu Grossman <grossman@babylon-5.cygnus.com> |
| |
| * Makefile.in (SIM_OBJS): Add sim-break.o. |
| * (INCLUDE_DEPS): Add tconfig.h. |
| * alu.h (MEM STORE): Change to sim_core_read/write_unaligned to |
| allow for trapping unaligned accesses. |
| * cpu.h: Define SIM_BREAKPOINT as syscall 5 for intrinsic breakpoint |
| mechanism. |
| * d30v-insn (short syscall): Use syscall 5 for breakpoint insn. |
| * sim-calls.c (sim_fetch_register sim_store_register): Implement. |
| * tconfig.in: Define SIM_HAVE_BREAKPOINTS to enable intrinsic |
| breakpoint mechanism. |
| |
| Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * Makefile.in (SIM_WARNINGS, SIM_ALIGNMENT, SIM_ENDIAN, |
| SIM_HOSTENDIAN, SIM_RESERVED_BITS): Delete, moved to common. |
| (SIM_EXTRA_CFLAGS): Update. |
| |
| Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure.in: Specify strict alignment. |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Sep 12 16:13:04 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_open): Change memory to |
| internal inst. RAM h'00000000-h'0000ffff (64KB) |
| internal data RAM h'20000000-h'20007fff (32KB) |
| external RAM h'80000000-h'803fffff (4MB) |
| EIT h'fffff000-h'ffffffff |
| |
| |
| Thu Sep 11 08:59:34 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * Makefile.in (SIM_OBJS): Add sim-hrw.o module. |
| |
| * sim-calls.c (sim_read): Delete. use sim-hrw. |
| (sim_write): Delete, use sim-hrw. |
| |
| |
| Tue Sep 9 01:36:20 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * ic-d30v (imm_5): Update nr args passed to LSMASKED. |
| |
| * d30v-insns (do_sat, do_sath, do_sath_p, do_satz, do_satzh): Fix, |
| computing the max sat value incorrectly. |
| |
| Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Sep 5 09:15:33 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns (do_mac, do_macs, do_msub, do_mulxs): Use explicit |
| type cast instead of SIGNED64 macro. |
| |
| Thu Sep 4 10:28:45 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * Makefile.in (SIM_OBJS): Include sim-memopt.o module. |
| |
| * sim-calls.c (sim_open): Pass zero modulo arg to sim_core_attach |
| calls. |
| (sim_open): If no memory, use memory commands to establish d30v |
| ram. |
| (d30v_option_handler): Delete, replased by sim-memopt.c. |
| (sim_create_inferior): Call sim_module_init. |
| |
| * sim-main.h (struct sim_state): Remove members eit_ram, |
| sizeof_eit_ram, external_ram, baseof_external_ram, |
| sizeof_external_ram. Using generic memory model instead. |
| |
| Mon Sep 1 11:04:09 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_open): Use sim_state_alloc. |
| |
| Sat Aug 30 10:01:51 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-main.h (INVALID_INSTRUCTION_ADDRESS): Define. |
| |
| * engine.c (do_2_short): Compare with INVALID_INSTRUCTION_ADDRESS |
| not -1. |
| |
| Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Wed Aug 27 13:41:54 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_open): Add call to sim_analyze_program, update |
| call to sim_config. |
| |
| * sim-calls.c (sim_create_inferior): Add ABFD argument. |
| Initialize CPU registers including PC. |
| (sim_load): Delete, using sim-hload. |
| |
| * Makefile.in (SIM_OBJS): Add sim-hload.o module. |
| |
| Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Mon Aug 25 15:41:44 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_open): Add ABFD argument. |
| (sim_open): Move sim_config call to after sim_parse_args. |
| (sim_open): Check sim_config return status. |
| |
| Fri Aug 22 16:38:59 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns (do_subh_ppp): Correct name, was do_sub_ppp. |
| (do_subh_ppp): Compute rc=rb-src instead of src-rb. |
| (do_addh_ppp): Ditto. |
| |
| Fri Jun 27 14:43:20 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns (mvfsys, mvtsys): Switch instruction encodings, was |
| wrong. Update handling of PSW[DS] bit. |
| (dbt): Fix debug trap address. |
| |
| * cpu.h (NR_CONTROL_REGISTERS): Allow the full 64 registers. |
| |
| Tue Jun 24 12:41:55 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns (DBT, RTD): Swap the stack after updating the PSW. |
| (DBT): Use PSW_SET to update PSW. |
| |
| * alu.h (ALU16_END): Check for 16 bit carry and not 32 bit. |
| |
| Tue Jun 24 12:16:14 1997 Andrew Cagney <cagney@b2.cygnus.com> |
| |
| * d30v-insns (ppp, ccc, pp, XX, p): Update format functions so |
| that they are of class %s instead of class function. |
| |
| Tue Jun 10 12:26:39 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-main.h (engine_error, engine_restart, engine_halt, |
| engine_run_until_stop): Delete prototypes. Functions deleted |
| earlier. |
| (do_interrupt_handler): Add prototype. |
| (sim_state): Add pending_event member to struct. |
| |
| * sim-calls.c (sim_open): Configure interrupt handler. |
| * engine.c (d30v_interrupt_event): New function. Deliver external |
| interrupt to processor. |
| |
| * d30v-insns (do_stack_swap): Move function from here. |
| * engine.c (do_stack_swap): To here. |
| * sim-main.h (do_stack_swap): Add prototype. |
| |
| * cpu.h (registers): Change current_sp to an int. |
| * d30v-insn (do_stack_swap): Update. |
| |
| Thu Jun 5 12:54:35 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns (LD*, ST*): Disasemble XX == 0 as immed version of |
| instruction. |
| (str_XXX): Fix case of XX == 3 - return "-". |
| |
| Thu Jun 5 12:54:35 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * engine.c (sim_engine_run): Issuing L->R and R->L instructions in |
| wrong order. |
| |
| * d30v-insn (CMPUcc imm long): With of RB field should be 6 not |
| three. |
| (MUL, MUL2H, MULHX): X field 01 instead of 10. |
| |
| Thu Jun 5 12:54:35 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns (mvtsys): Don't modify DS bit when writing to PSW. |
| (dbt, rtd): New instructions. |
| |
| * cpu.h (NR_CONTROL_REGISTERS): Now 15. |
| (debug_program_status_word_cr, debug_program_counter_cr): Add |
| debug control registers. Renumber other control registers. |
| (PSW_DS): New PSW bit. |
| (DPC, DPSW): Define. |
| |
| Wed May 28 13:45:47 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * engine.c (sim_engine_run): Check the event queue on every cycle. |
| |
| * sim-calls.c (sim_size): Delete. |
| (sim_do_command): Call sim_args_command. |
| (sim_open): Move eit_ram and sizeof_eit_ram to sim_state struct. |
| (simulation): Delete global now depend on sd argument. |
| (sim_open): Initialize sim-watch. |
| (d30v_option_handler): New function, parse mem-size argument. |
| |
| Tue May 27 14:03:38 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_set_callbacks): Delete. |
| (sim_write): Pass NULL cpu arg to sim_core_write_buffer. |
| |
| * engine.c (engine_init): Delete. Handled in sim_open. |
| (engine_create): Ditto. |
| |
| Tue May 20 10:15:35 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_open): Add callback argument. |
| (sim_set_callbacks): Delete SIM_DESC argument. |
| |
| Mon May 19 14:59:32 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_open): Set the sim.base magic number. |
| |
| Fri May 16 15:25:59 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * d30v-insns: Replace engine_error with common sim_engine_abort. |
| * cpu.c (is_condition_ok, is_wrong_slot): Ditto. |
| |
| * engine.c (engine_run_until_stop): Rename this. |
| (sim_engine_run): To this. Simplify - most moved to common. |
| |
| * sim-calls.c (sim_stop_reason, sim_resume, sim_stop): |
| Delete. Replaced by common code. |
| |
| * engine.c (engine_error, engine_restart, engine_halt): Ditto. |
| |
| * sim-main.h (SIM_ENGINE_RESTART_HOOK, SIM_ENGINE_HALT_HOOK): |
| Define as NOPs. |
| |
| Mon May 5 23:05:41 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * alu.h (IMEM, MEM, STORE): Update to reflect changes to core in |
| ../common. |
| * sim-calls.c (sim_open): Ditto. |
| |
| * alu.h, cpu.h, cpu.c, d30v-insn, dc-short: Clean up copyright |
| notice. |
| |
| Fri May 2 12:01:38 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim-options.h, sim-utils.h): Include. |
| * Makefile.in (sim-calls.o): Add dependencies. |
| |
| * d30v-insns (address_word): Remove cia argument from support |
| functions, igen now does this automatically. |
| |
| * Makefile.in (tmp-igen): Include line number information in |
| generated files. |
| |
| * sim-main.h (SIM_DESC): Remove sim_events and sim_core, moved to |
| simulator base type sim_state_base. |
| (sim-core.h, sim-events.h, sim-io.h): Replace with #include |
| "sim-base.h". |
| |
| * sim-main.h (sim_state): Track recomendations in common |
| directory. |
| * cpu.h (sim_cpu): Ditto. |
| * engine.c (do_2_short, do_parallel): Ditto. |
| * cpu.h (GPR): Ditto. |
| * alu.h (MEM, IMEM, STORE): Ditto. |
| * cpu.c (is_wrong_slot): Ditto. |
| * ic-d30v (Aa, Ab): Ditto. |
| |
| Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * Makefile.in (SIM_OBJS): Add sim-module.o, sim-profile.o. |
| * sim-calls.c (sim_open): Call sim_module_uninstall if argument |
| parsing fails. Call sim_post_argv_init. |
| (sim_close): Call sim_module_uninstall. |
| |
| Fri Apr 18 13:44:48 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * sim-calls.c (sim_stop): New function. |
| |
| Thu Apr 17 02:57:55 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * Makefile.in (SIM_OBJS): Add sim-load.o, sim-options.o, sim-trace.o. |
| (SIM_EXTRA_{LIBS,LIBDEPS,ALL,INSTALL}): Delete. |
| (SIM_RUN_OBJS): Change from run.o to nrun.o. |
| * cpu.h (sim_cpu): New member base. Delete members trace, sd. |
| (cpu_traces): Delete. |
| * engine.c (engine_init): Set backlink from cpu to state. |
| * sim-calls.c: #include bfd.h. |
| (sim_open): Set STATE_OPEN_KIND. Call sim_pre_argv_init, |
| sim_parse_args. |
| (sim_load): Return SIM_RC. New arg abfd. |
| Call sim_load_file to load file into simulator. |
| (sim_create_inferior): Return SIM_RC. Delete arg start_address. |
| (sim_trace): Delete. |
| * sim-main.h (struct sim_state): sim_state_base is typedef now. |
| (STATE_CPU): Define. |
| |
| Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * Makefile.in (SIM_EXTRA_DEPS): Define. |
| (SIM_OBJS): Add sim-utils.o. |
| (SIM_GEN): Delete tmp-common. |
| (SIM_EXTRA_CLEAN): Delete clean-common. |
| (BUILT_SRC_FROM_COMMON): Moved to ../common/Make-common.in. |
| (tmp-common,clean-common): Delete. |
| (ENGINE_H): sim-state.h renamed to sim-main.h. |
| (clean-igen): Delete tmp-insns. |
| |
| * cpu.c: sim-state.h renamed to sim-main.h. |
| * engine.c: Likewise. |
| * sim-calls.c: Likewise. |
| (zalloc,zfree): Moved to ../common/sim-utils.c. |
| * sim-main.h: Renamed from sim-state.h. |
| |
| * sim-calls.c (sim_open): New arg `kind'. |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Apr 2 11:13:15 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * Makefile.in (SIM_OBJS): Link in the recently added sim-config.o |
| |
| * engine.c (current_target_byte_order, current_host_byte_order, |
| current_environment, current_alignment, current_floating_point, |
| current_model_issue, current_stdio): Delete, moved to |
| ../common/sim-config.c |
| |
| Mon Mar 24 14:50:30 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * d30v-insns (do_ldw): Load 4 bytes not 2. |
| (do_incr, LD*, ST*): Increment register not its value. |
| |
| Mon Mar 24 09:59:53 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * cpu.c (is_wrong_slot): Ditto. |
| (is_condition_ok): Ditto. |
| |
| * sim-calls.c (sim_trace): Ditto. |
| |
| * engine.c (engine_init): Ditto. |
| (do_2_short): Ditto. |
| (engine_run_until_stop): Ditto. |
| |
| * d30v-insns (void): Update. For functions, remove `SIM_DESC sd' |
| and `cpu *processor' arguments as igen now handles this. |
| |
| * cpu.h: Rename struct _cpu to struct _sim_cpu. Rename variable |
| processor to cpu. |
| |
| * sim-state.h: Update. |
| |
| Fri Mar 21 12:52:12 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * d30v-insns (do_sat): Correct calculation of saturate lower |
| bound. |
| (do_sath): Ditto. |
| (do_satzh, do_satz): Arguments should be signed. |
| |
| * sim-calls.c (zalloc): Use malloc() instead of xmalloc() for |
| moment. |
| (filter_filename): Drop. |
| |
| * cpu.h (is_wrong_slot): Correct declaration name - was |
| is_valid_slot. |
| |
| * engine.c (do_parallel): Plicate GCC. |
| (engine_error): Ditto. |
| (engine_run_until_stop): Ditto. |
| * cpu.c (is_wrong_slot): Ditto. |
| (is_condition_ok): Ditto. |
| * sim-calls.c (sim_size): Ditto. |
| (sim_read): Ditto. |
| (sim_trace): Ditto. |
| |
| * engine.h, engine.c (engine_create): Add missing prototype to |
| header file. Clean up missing variables. |
| |
| * configure.in (unistd.h, string.h, strings.h): Configure in. |
| * configure, config.in: Rebuild. |
| |
| Thu Mar 20 19:40:20 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * d30v-insns (void): Provide a second emul instruction using a |
| branch prefix. |
| |
| Tue Mar 18 20:51:42 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * d30v-insn (do_sat*): Pass all necessary args. |
| |
| Tue Mar 18 18:49:10 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * d30v-insns (SAT*): Issue warning when bit overflow. |
| (EMUL): Exit with GPR[2] not 2. |
| |
| Tue Mar 18 14:24:09 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * sim-state.h: New file rename engine.h. |
| (sim_state): Rename engine strut to sim_state, rename events and |
| core members. |
| |
| * engine.c: Update. |
| * cpu.h, cpu.c: Ditto. |
| * alu.h: Ditto. |
| * d30v-insns: Ditto. |
| * sim-calls.c: Ditto. |
| |
| * Makefile.in (sim-*.c): Moved to ../common. |
| |
| Tue Mar 18 10:39:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * d30v-insns (do_mac): Adding wrong register. |
| (do_macs): Ditto. |
| (do_msub): Ditto. |
| (do_msubs): Ditto. |
| |
| * ic-d30v: Put back definitions of RaH, RaL, et.al. |
| (do_sra2h, do_srah): Use. |
| (do_srl2h, do_srlh): Use. |
| |
| * d30v-insns (SAT, SAT2H, SATp, SATZ): Implement saturate. |
| |
| Tue Mar 18 03:01:25 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * d30v-insns: Specify wild insted of reserved bits. |
| (void): |
| |
| Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Re-generate. |
| |
| Mon Mar 17 14:35:37 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * Makefile.in (SIM_EXTRA_CFLAGS), configure.in: Include SIM_* |
| options. Allow RESERVED_BITS to be configured. |
| * configure: Re-generate. |
| |
| * Makefile.in (sim-*.h): Drop, not needed. |
| (sim-*.c): Make each explicit so that they automatically update. |
| |
| Sat Mar 15 02:34:30 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * ic-d30v (imm long): Incorrect calculation. |
| |
| * d30v-insns (EMUL): Finish exit, write-string emul-call. |
| |
| * sim-calls.c (sim_trace): Have sim-trace enable basic instruction |
| tracing. |
| |
| Sat Mar 15 02:10:31 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure.in: Enable common options - endian, inline and |
| warnings. |
| * configure: Regenerate. |
| |
| Fri Mar 14 16:11:50 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * Makefile.in (cpu.o): Update dependencies. |
| * cpu.c (is_condition_ok): Update PSW bit manipulations. |
| |
| Fri Mar 14 12:49:20 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure.in: Autoconfig m4 |
| * configure: Regenerate. |
| |
| * Makefile.in: Use m4 to preprocess d30v-insns. |
| * d30v-insn: Adjust. |
| |
| Thu Mar 13 12:44:54 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * sim-calls.c (sim_open): New SIM_DESC result. Argument is now |
| in argv form. |
| (other sim_*): New SIM_DESC argument. |
| |
| Wed Mar 12 19:05:45 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * sim-calls.c (sim_open): Create all the d30v RAM blocks. |
| |
| * engine.c (engine_run_until_stop): Handle delayed subroutine |
| call. |
| * d30v-insn: Ditto. |
| |
| * ic-d30v: For Rb and Rc always return the value and not the |
| equation. |
| * d30v-insn: Use. |
| |
| * ic-d30v (val_Ra): Returns 0 or RA. |
| * d30v-insn: Use. |
| |
| * d30v-insn (make_even_reg, get_even_reg): New functions. Force |
| the register index to be even, issusing a warning if it was not. |
| (LD*, ST*): Use. |
| |
| Wed Mar 12 14:57:26 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * d30v-insns (do_trap): Implement TRAP instruction. |
| |
| * alu.h (PSW_F, PSW_FLAG_VAL, PSW_FLAG_SET): New macro, map flag |
| onto PSW bit. |
| * ic-d30v: Drop F* expressions. |
| * d30v-insn: Use more explicit PSW_FLAG_ ops. |
| * cpu.h (PSW_*): Redo PSW bit values. |
| * alu.h (ALU*_END): Update. Fix setting of overflow - logic was |
| backwards. |
| |
| * d30v-insn (MVFSYS, MVTSYS): Implement. |
| * cpu.h (PSWH, PSWL): New macros for high, low word of PSW. |
| |
| Wed Mar 12 14:12:11 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * cpu.h (RPT_IS_CALL): New macro for processor field |
| is_delayed_call. That in turn used as a flag to indicate if a |
| delayed branch or delayed call is to occure. |
| * d30v-insns (do_dbra): Set/clear RPT_IS_CALL; |
| (do_dbrai): Ditto. |
| (do_dbsr): Ditto. |
| (do_dbsr): Ditto. |
| (do_djmp): Ditto. |
| (do_djmpi): Dotto. |
| (do_djsr): Ditto. |
| (do_djsri): Ditto. |
| (void): |
| |
| * d30v-insn (do_incr): Finish - handle modulo registers. |
| |
| * d30v-insns (CMPU): Include all possible compare |
| operations. Issue a warning where op defined by the processor |
| spec. |
| |
| Wed Mar 12 13:55:55 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * d30v-insns: Add a new instruction class _EMUL and a new |
| instruction EMUL that emulates a few basic IO operations. |
| |
| * Makefile.in (tmp-igen): Filter in emul instructions. |
| |
| Fri Mar 7 20:32:13 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * d30v-insns (void): Fill in the gaps. |
| |
| Wed Feb 26 09:31:10 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au> |
| |
| * Makefile.in (tmp-igen): Include ic-d30v in dependencies. |
| |
| * ic-d30v (cache): Update to use H_word, L_word added to |
| sim-endian.h. |
| |
| Tue Feb 25 15:26:51 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au> |
| |
| * Makefile.in (tmp-igen): Correctly run $(MAKE). |
| |
| Thu Feb 20 20:30:31 1997 Andrew Cagney <cagney@critters.cygnus.com> |
| |
| * Makefile.in (FROM_IGEN, FROM_COMMON): Make the igen generated |
| files dependant on tmp-igen. Define ENGINE_H. |
| |
| Sun Feb 16 16:42:48 1997 Andrew Cagney <cagney@critters.cygnus.com> |
| |
| * configure.in: New file - follow Doug Evans instructions. |
| * Makefile.in: Ditto. |
| |
