| # Makefile.in generated by automake 1.9.6 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| top_builddir = . |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| INSTALL = @INSTALL@ |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| bin_PROGRAMS = gprof$(EXEEXT) |
| DIST_COMMON = $(srcdir)/../config.guess $(srcdir)/../config.sub README \ |
| ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ |
| $(top_srcdir)/configure $(am__configure_deps) \ |
| $(srcdir)/gconfig.in $(srcdir)/../mkinstalldirs \ |
| $(top_srcdir)/po/Make-in $(srcdir)/../ltmain.sh \ |
| $(srcdir)/../config.guess $(srcdir)/../config.sub \ |
| $(gprof_TEXINFOS) $(noinst_HEADERS) |
| subdir = . |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/../bfd/warning.m4 \ |
| $(top_srcdir)/../config/depstand.m4 \ |
| $(top_srcdir)/../config/extensions.m4 \ |
| $(top_srcdir)/../config/gettext-sister.m4 \ |
| $(top_srcdir)/../config/lead-dot.m4 \ |
| $(top_srcdir)/../config/nls.m4 \ |
| $(top_srcdir)/../config/override.m4 \ |
| $(top_srcdir)/../config/po.m4 \ |
| $(top_srcdir)/../config/proginstall.m4 \ |
| $(top_srcdir)/../config/progtest.m4 \ |
| $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \ |
| $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \ |
| $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.in |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno configure.status.lineno |
| mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs |
| CONFIG_HEADER = gconfig.h |
| CONFIG_CLEAN_FILES = po/Makefile.in |
| am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" |
| binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) |
| PROGRAMS = $(bin_PROGRAMS) |
| am__objects_1 = basic_blocks.$(OBJEXT) call_graph.$(OBJEXT) \ |
| cg_arcs.$(OBJEXT) cg_dfn.$(OBJEXT) cg_print.$(OBJEXT) \ |
| corefile.$(OBJEXT) gmon_io.$(OBJEXT) gprof.$(OBJEXT) \ |
| hertz.$(OBJEXT) hist.$(OBJEXT) source.$(OBJEXT) \ |
| search_list.$(OBJEXT) symtab.$(OBJEXT) sym_ids.$(OBJEXT) \ |
| utils.$(OBJEXT) i386.$(OBJEXT) alpha.$(OBJEXT) vax.$(OBJEXT) \ |
| tahoe.$(OBJEXT) sparc.$(OBJEXT) mips.$(OBJEXT) |
| am_gprof_OBJECTS = $(am__objects_1) flat_bl.$(OBJEXT) \ |
| bsd_callg_bl.$(OBJEXT) fsf_callg_bl.$(OBJEXT) |
| gprof_OBJECTS = $(am_gprof_OBJECTS) |
| am__DEPENDENCIES_1 = |
| DEFAULT_INCLUDES = -I. -I$(srcdir) -I. |
| depcomp = |
| am__depfiles_maybe = |
| COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
| $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ |
| $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ |
| $(AM_CFLAGS) $(CFLAGS) |
| CCLD = $(CC) |
| LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ |
| $(AM_LDFLAGS) $(LDFLAGS) -o $@ |
| SOURCES = $(gprof_SOURCES) |
| INFO_DEPS = gprof.info |
| TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex |
| am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo |
| DVIS = gprof.dvi |
| PDFS = gprof.pdf |
| PSS = gprof.ps |
| HTMLS = gprof.html |
| TEXINFOS = gprof.texi |
| TEXI2PDF = $(TEXI2DVI) --pdf --batch |
| MAKEINFOHTML = $(MAKEINFO) --html |
| AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) |
| DVIPS = dvips |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-exec-recursive install-info-recursive \ |
| install-recursive installcheck-recursive installdirs-recursive \ |
| pdf-recursive ps-recursive uninstall-info-recursive \ |
| uninstall-recursive |
| man1dir = $(mandir)/man1 |
| NROFF = nroff |
| MANS = $(man_MANS) |
| HEADERS = $(noinst_HEADERS) |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = $(SUBDIRS) |
| ACLOCAL = @ACLOCAL@ |
| AMDEP_FALSE = @AMDEP_FALSE@ |
| AMDEP_TRUE = @AMDEP_TRUE@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CATALOGS = @CATALOGS@ |
| CATOBJEXT = @CATOBJEXT@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DATADIRNAME = @DATADIRNAME@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| GENCAT = @GENCAT@ |
| GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@ |
| GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@ |
| GMSGFMT = @GMSGFMT@ |
| GREP = @GREP@ |
| INCINTL = @INCINTL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INSTOBJEXT = @INSTOBJEXT@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBINTL = @LIBINTL@ |
| LIBINTL_DEP = @LIBINTL_DEP@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ |
| MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ |
| MAKEINFO = @MAKEINFO@ |
| MKINSTALLDIRS = @MKINSTALLDIRS@ |
| MSGFMT = @MSGFMT@ |
| MSGMERGE = @MSGMERGE@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| NO_WERROR = @NO_WERROR@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| POSUB = @POSUB@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| WARN_CFLAGS = @WARN_CFLAGS@ |
| XGETTEXT = @XGETTEXT@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DSYMUTIL = @ac_ct_DSYMUTIL@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| ac_ct_LIPO = @ac_ct_LIPO@ |
| ac_ct_NMEDIT = @ac_ct_NMEDIT@ |
| ac_ct_OBJDUMP = @ac_ct_OBJDUMP@ |
| ac_ct_OTOOL = @ac_ct_OTOOL@ |
| ac_ct_OTOOL64 = @ac_ct_OTOOL64@ |
| ac_ct_RANLIB = @ac_ct_RANLIB@ |
| ac_ct_STRIP = @ac_ct_STRIP@ |
| am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ |
| am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localstatedir = @localstatedir@ |
| lt_ECHO = @lt_ECHO@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| AUTOMAKE_OPTIONS = cygnus |
| ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd |
| SUFFIXES = .m |
| SUBDIRS = po |
| BASEDIR = $(srcdir)/.. |
| BFDDIR = $(BASEDIR)/bfd |
| INCDIR = $(BASEDIR)/include |
| AM_CFLAGS = $(WARN_CFLAGS) |
| MKDEP = gcc -MM |
| INCLUDES = -DDEBUG -I../bfd -I$(srcdir)/../include \ |
| -I$(srcdir)/../bfd @INCINTL@ -I. \ |
| -DLOCALEDIR="\"$(datadir)/locale\"" |
| |
| sources = basic_blocks.c call_graph.c cg_arcs.c cg_dfn.c \ |
| cg_print.c corefile.c gmon_io.c gprof.c hertz.c hist.c source.c \ |
| search_list.c symtab.c sym_ids.c utils.c \ |
| i386.c alpha.c vax.c tahoe.c sparc.c mips.c |
| |
| gprof_SOURCES = $(sources) flat_bl.c bsd_callg_bl.c fsf_callg_bl.c |
| gprof_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a $(LIBINTL_DEP) |
| gprof_LDADD = ../bfd/libbfd.la ../libiberty/libiberty.a $(LIBINTL) |
| noinst_HEADERS = \ |
| basic_blocks.h call_graph.h cg_arcs.h cg_dfn.h cg_print.h \ |
| corefile.h gmon.h gmon_io.h gmon_out.h gprof.h hertz.h hist.h \ |
| search_list.h source.h sym_ids.h symtab.h utils.h |
| |
| BUILT_SOURCES = flat_bl.c bsd_callg_bl.c fsf_callg_bl.c |
| EXTRA_DIST = $(BUILT_SOURCES) bbconv.pl $(man_MANS) |
| POTFILES = $(sources) $(noinst_HEADERS) |
| MANCONF = -Dman |
| TEXI2POD = perl $(srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS) |
| POD2MAN = pod2man --center="GNU" --release="binutils-$(VERSION)" --section=1 |
| info_TEXINFOS = gprof.texi |
| gprof_TEXINFOS = config.texi |
| man_MANS = gprof.1 |
| AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc |
| TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc |
| html__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
| CLEANFILES = dep.sed DEP DEPA DEP1 DEP2 |
| MAINTAINERCLEANFILES = gprof.info |
| |
| # Automake 1.9 will only build info files in the objdir if they are |
| # mentioned in DISTCLEANFILES. It doesn't have to be unconditional, |
| # though, so we use a bogus condition. |
| @GENINSRC_NEVER_TRUE@DISTCLEANFILES = gprof.info |
| all: $(BUILT_SOURCES) gconfig.h |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| .SUFFIXES: |
| .SUFFIXES: .m .c .dvi .lo .o .obj .ps |
| am--refresh: |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ |
| cd $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| |
| gconfig.h: stamp-h1 |
| @if test ! -f $@; then \ |
| rm -f stamp-h1; \ |
| $(MAKE) stamp-h1; \ |
| else :; fi |
| |
| stamp-h1: $(srcdir)/gconfig.in $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status gconfig.h |
| $(srcdir)/gconfig.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_srcdir) && $(AUTOHEADER) |
| rm -f stamp-h1 |
| touch $@ |
| |
| distclean-hdr: |
| -rm -f gconfig.h stamp-h1 |
| po/Makefile.in: $(top_builddir)/config.status $(top_srcdir)/po/Make-in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| install-binPROGRAMS: $(bin_PROGRAMS) |
| @$(NORMAL_INSTALL) |
| test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" |
| @list='$(bin_PROGRAMS)'; for p in $$list; do \ |
| p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ |
| if test -f $$p \ |
| || test -f $$p1 \ |
| ; then \ |
| f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ |
| echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ |
| $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ |
| else :; fi; \ |
| done |
| |
| uninstall-binPROGRAMS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(bin_PROGRAMS)'; for p in $$list; do \ |
| f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ |
| echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(bindir)/$$f"; \ |
| done |
| |
| clean-binPROGRAMS: |
| @list='$(bin_PROGRAMS)'; for p in $$list; do \ |
| f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ |
| echo " rm -f $$p $$f"; \ |
| rm -f $$p $$f ; \ |
| done |
| gprof$(EXEEXT): $(gprof_OBJECTS) $(gprof_DEPENDENCIES) |
| @rm -f gprof$(EXEEXT) |
| $(LINK) $(gprof_LDFLAGS) $(gprof_OBJECTS) $(gprof_LDADD) $(LIBS) |
| |
| mostlyclean-compile: |
| -rm -f *.$(OBJEXT) |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| .c.o: |
| $(COMPILE) -c $< |
| |
| .c.obj: |
| $(COMPILE) -c `$(CYGPATH_W) '$<'` |
| |
| .c.lo: |
| $(LTCOMPILE) -c -o $@ $< |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool |
| |
| gprof.info: gprof.texi $(gprof_TEXINFOS) |
| restore=: && backupdir="$(am__leading_dot)am$$$$" && \ |
| rm -rf $$backupdir && mkdir $$backupdir && \ |
| if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ |
| for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ |
| if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ |
| done; \ |
| else :; fi && \ |
| if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $@ `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi; \ |
| then \ |
| rc=0; \ |
| else \ |
| rc=$$?; \ |
| $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ |
| fi; \ |
| rm -rf $$backupdir; exit $$rc |
| |
| gprof.dvi: gprof.texi $(gprof_TEXINFOS) |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2DVI) -o $@ `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi |
| |
| gprof.pdf: gprof.texi $(gprof_TEXINFOS) |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2PDF) -o $@ `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi |
| |
| gprof.html: gprof.texi $(gprof_TEXINFOS) |
| rm -rf $(@:.html=.htp) |
| if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $(@:.html=.htp) `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi; \ |
| then \ |
| rm -rf $@; \ |
| if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ |
| mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ |
| else \ |
| if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ |
| rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ |
| exit 1; \ |
| fi |
| .dvi.ps: |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| $(DVIPS) -o $@ $< |
| |
| uninstall-info-am: |
| @$(PRE_UNINSTALL) |
| @if (install-info --version && \ |
| install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ |
| install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ |
| done; \ |
| else :; fi |
| @$(NORMAL_UNINSTALL) |
| @list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| (if cd "$(DESTDIR)$(infodir)"; then \ |
| echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ |
| rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ |
| else :; fi); \ |
| done |
| |
| dist-info: $(INFO_DEPS) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| list='$(INFO_DEPS)'; \ |
| for base in $$list; do \ |
| case $$base in \ |
| $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ |
| esac; \ |
| if test -f $$base; then d=.; else d=$(srcdir); fi; \ |
| for file in $$d/$$base*; do \ |
| relfile=`expr "$$file" : "$$d/\(.*\)"`; \ |
| test -f $(distdir)/$$relfile || \ |
| cp -p $$file $(distdir)/$$relfile; \ |
| done; \ |
| done |
| |
| mostlyclean-aminfo: |
| -rm -rf gprof.aux gprof.cp gprof.cps gprof.fn gprof.fns gprof.ky gprof.kys \ |
| gprof.log gprof.pg gprof.pgs gprof.tmp gprof.toc gprof.tp \ |
| gprof.tps gprof.vr gprof.vrs gprof.dvi gprof.pdf gprof.ps \ |
| gprof.html |
| |
| maintainer-clean-aminfo: |
| @list='$(INFO_DEPS)'; for i in $$list; do \ |
| i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ |
| rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ |
| done |
| |
| clean-info: mostlyclean-aminfo |
| install-man1: $(man1_MANS) $(man_MANS) |
| @$(NORMAL_INSTALL) |
| test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" |
| @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ |
| l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ |
| for i in $$l2; do \ |
| case "$$i" in \ |
| *.1*) list="$$list $$i" ;; \ |
| esac; \ |
| done; \ |
| for i in $$list; do \ |
| if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ |
| else file=$$i; fi; \ |
| ext=`echo $$i | sed -e 's/^.*\\.//'`; \ |
| case "$$ext" in \ |
| 1*) ;; \ |
| *) ext='1' ;; \ |
| esac; \ |
| inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ |
| inst=`echo $$inst | sed -e 's/^.*\///'`; \ |
| inst=`echo $$inst | sed '$(transform)'`.$$ext; \ |
| echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ |
| $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ |
| done |
| uninstall-man1: |
| @$(NORMAL_UNINSTALL) |
| @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ |
| l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ |
| for i in $$l2; do \ |
| case "$$i" in \ |
| *.1*) list="$$list $$i" ;; \ |
| esac; \ |
| done; \ |
| for i in $$list; do \ |
| ext=`echo $$i | sed -e 's/^.*\\.//'`; \ |
| case "$$ext" in \ |
| 1*) ;; \ |
| *) ext='1' ;; \ |
| esac; \ |
| inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ |
| inst=`echo $$inst | sed -e 's/^.*\///'`; \ |
| inst=`echo $$inst | sed '$(transform)'`.$$ext; \ |
| echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ |
| rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ |
| done |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| mostlyclean-recursive clean-recursive distclean-recursive \ |
| maintainer-clean-recursive: |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) gconfig.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) gconfig.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) gconfig.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) gconfig.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| check-am: |
| check: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) check-recursive |
| all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) gconfig.h |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ |
| test -z "$$dir" || $(mkdir_p) "$$dir"; \ |
| done |
| install: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) |
| -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) |
| clean: clean-recursive |
| |
| clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-compile distclean-generic \ |
| distclean-hdr distclean-libtool distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: $(DVIS) |
| |
| html: html-recursive |
| |
| html-am: $(HTMLS) |
| |
| info: info-recursive |
| |
| info-am: $(INFO_DEPS) |
| |
| install-data-am: install-data-local install-man |
| |
| install-exec-am: install-binPROGRAMS |
| |
| install-info: install-info-recursive |
| |
| install-info-am: $(INFO_DEPS) |
| @$(NORMAL_INSTALL) |
| test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| esac; \ |
| if test -f $$file; then d=.; else d=$(srcdir); fi; \ |
| file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ |
| $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ |
| if test -f $$ifile; then \ |
| relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ |
| echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ |
| $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ |
| else : ; fi; \ |
| done; \ |
| done |
| @$(POST_INSTALL) |
| @if (install-info --version && \ |
| install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ |
| install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ |
| done; \ |
| else : ; fi |
| install-man: install-man1 |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-aminfo \ |
| maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \ |
| mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: $(PDFS) |
| |
| ps: ps-recursive |
| |
| ps-am: $(PSS) |
| |
| uninstall-am: uninstall-binPROGRAMS uninstall-man |
| |
| uninstall-info: uninstall-info-recursive |
| |
| uninstall-man: uninstall-man1 |
| |
| .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ |
| check-am clean clean-binPROGRAMS clean-generic clean-info \ |
| clean-libtool clean-recursive ctags ctags-recursive dist-info \ |
| distclean distclean-compile distclean-generic distclean-hdr \ |
| distclean-libtool distclean-recursive distclean-tags dvi \ |
| dvi-am html html-am info info-am install install-am \ |
| install-binPROGRAMS install-data install-data-am \ |
| install-data-local install-exec install-exec-am install-info \ |
| install-info-am install-man install-man1 install-strip \ |
| installcheck installcheck-am installdirs installdirs-am \ |
| maintainer-clean maintainer-clean-aminfo \ |
| maintainer-clean-generic maintainer-clean-recursive \ |
| mostlyclean mostlyclean-aminfo mostlyclean-compile \ |
| mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ |
| pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ |
| uninstall-binPROGRAMS uninstall-info-am uninstall-man \ |
| uninstall-man1 |
| |
| |
| diststuff: $(BUILT_SOURCES) info $(man_MANS) |
| |
| # This empty rule is a hack against gmake patched by Apple. |
| %.o:%.m |
| |
| .m.c: |
| awk -f $(srcdir)/gen-c-prog.awk > ./$*.c \ |
| FUNCTION=`(echo $*|sed -e 's,.*/,,g' -e 's/_bl//')`_blurb \ |
| FILE=$*.m $(srcdir)/$*.m |
| po/POTFILES.in: @MAINT@ Makefile |
| for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \ |
| && mv tmp $(srcdir)/po/POTFILES.in |
| |
| config.texi: |
| echo "@set top_srcdir $(top_srcdir)" >> ./config.texi |
| |
| # Build the man page from the texinfo file |
| # The sed command removes the no-adjust Nroff command so that |
| # the man output looks standard. |
| gprof.1: $(srcdir)/gprof.texi config.texi |
| touch $@ |
| -$(TEXI2POD) $(MANCONF) -Dgprof < $(srcdir)/gprof.texi > gprof.pod |
| -($(POD2MAN) gprof.pod | \ |
| sed -e '/^.if n .na/d' > $@.T$$$$ && \ |
| mv -f $@.T$$$$ $@) || \ |
| (rm -f $@.T$$$$ && exit 1) |
| rm -f gprof.pod |
| |
| .PHONY: install-html install-html-am install-html-recursive |
| |
| install-html: install-html-recursive install-html-am |
| |
| install-html-am: $(HTMLS) |
| @$(NORMAL_INSTALL) |
| test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)" |
| @list='$(HTMLS)'; for p in $$list; do \ |
| if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \ |
| f=$(html__strip_dir) \ |
| if test -d "$$d$$p"; then \ |
| echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ |
| echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \ |
| else \ |
| echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \ |
| fi; \ |
| done |
| |
| install-html-recursive: |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| # We want install to imply install-info as per GNU standards, despite the |
| # cygnus option. |
| install-data-local: install-info |
| |
| # Targets to rebuild dependencies in this Makefile. |
| # Have to get rid of DEP1 here so that "$?" later includes all sources. |
| DEP: dep.sed $(gprof_SOURCES) $(noinst_HEADERS) gconfig.h |
| rm -f DEP1 |
| $(MAKE) MKDEP="$(MKDEP)" DEP1 |
| sed -f dep.sed < DEP1 > DEPA |
| echo '# IF YOU PUT ANYTHING HERE IT WILL GO AWAY' >> DEPA |
| if grep ' /' DEPA > /dev/null 2> /dev/null; then \ |
| echo 'make DEP failed!'; exit 1; \ |
| else \ |
| mv -f DEPA $@; \ |
| fi |
| |
| DEP1: $(gprof_SOURCES) |
| echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > DEP2 |
| echo '# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.' >> DEP2 |
| $(MKDEP) $(INCLUDES) $(CFLAGS) $? >> DEP2 |
| mv -f DEP2 $@ |
| |
| dep.sed: dep-in.sed config.status |
| objdir=`pwd`; \ |
| sed <$(srcdir)/dep-in.sed >dep.sed \ |
| -e 's!@INCDIR@!$(INCDIR)!' \ |
| -e 's!@BFDDIR@!$(BFDDIR)!' \ |
| -e 's!@SRCDIR@!$(srcdir)!' \ |
| -e "s!@OBJDIR@!$${objdir}!" \ |
| -e 's!@TOPDIR@!'`echo $(srcdir) | sed -e s,/gprof$$,,`'!' |
| |
| dep: DEP |
| sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile |
| cat DEP >> tmp-Makefile |
| $(SHELL) $(srcdir)/../move-if-change tmp-Makefile Makefile |
| |
| dep-in: DEP |
| sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in |
| cat DEP >> tmp-Makefile.in |
| $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in |
| |
| dep-am: DEP |
| sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am |
| cat DEP >> tmp-Makefile.am |
| $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am |
| |
| .PHONY: dep dep-in dep-am |
| |
| # DO NOT DELETE THIS LINE -- mkdep uses it. |
| # DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY. |
| basic_blocks.o: basic_blocks.c gprof.h $(BFDDIR)/sysdep.h \ |
| ../bfd/config.h $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/filenames.h ../bfd/bfd.h $(INCDIR)/symcat.h \ |
| gconfig.h $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \ |
| basic_blocks.h corefile.h gmon_io.h gmon_out.h search_list.h \ |
| source.h symtab.h sym_ids.h |
| call_graph.o: call_graph.c gprof.h $(BFDDIR)/sysdep.h \ |
| ../bfd/config.h $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/filenames.h ../bfd/bfd.h $(INCDIR)/symcat.h \ |
| gconfig.h search_list.h source.h symtab.h cg_arcs.h \ |
| call_graph.h corefile.h gmon_io.h gmon_out.h sym_ids.h |
| cg_arcs.o: cg_arcs.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/libiberty.h \ |
| $(INCDIR)/ansidecl.h search_list.h source.h symtab.h \ |
| call_graph.h cg_arcs.h cg_dfn.h cg_print.h utils.h \ |
| sym_ids.h |
| cg_dfn.o: cg_dfn.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/libiberty.h \ |
| $(INCDIR)/ansidecl.h search_list.h source.h symtab.h \ |
| cg_arcs.h cg_dfn.h utils.h |
| cg_print.o: cg_print.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/libiberty.h \ |
| $(INCDIR)/ansidecl.h search_list.h source.h symtab.h \ |
| cg_arcs.h cg_print.h hist.h utils.h corefile.h |
| corefile.o: corefile.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/libiberty.h \ |
| $(INCDIR)/ansidecl.h search_list.h source.h symtab.h \ |
| hist.h corefile.h $(INCDIR)/safe-ctype.h |
| gmon_io.o: gmon_io.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/binary-io.h \ |
| search_list.h source.h symtab.h cg_arcs.h basic_blocks.h \ |
| corefile.h call_graph.h gmon_io.h gmon_out.h gmon.h \ |
| hertz.h hist.h $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h |
| gprof.o: gprof.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/libiberty.h \ |
| $(INCDIR)/ansidecl.h ../bfd/bfdver.h search_list.h \ |
| source.h symtab.h basic_blocks.h call_graph.h cg_arcs.h \ |
| cg_print.h corefile.h gmon_io.h hertz.h hist.h sym_ids.h \ |
| $(INCDIR)/demangle.h $(INCDIR)/libiberty.h |
| hertz.o: hertz.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h hertz.h |
| hist.o: hist.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/libiberty.h \ |
| $(INCDIR)/ansidecl.h search_list.h source.h symtab.h \ |
| corefile.h gmon_io.h gmon_out.h hist.h sym_ids.h utils.h |
| source.o: source.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/libiberty.h \ |
| $(INCDIR)/ansidecl.h search_list.h source.h |
| search_list.o: search_list.c gprof.h $(BFDDIR)/sysdep.h \ |
| ../bfd/config.h $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h \ |
| $(INCDIR)/filenames.h ../bfd/bfd.h $(INCDIR)/symcat.h \ |
| gconfig.h $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \ |
| search_list.h |
| symtab.o: symtab.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h search_list.h \ |
| source.h symtab.h cg_arcs.h corefile.h |
| sym_ids.o: sym_ids.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/libiberty.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/safe-ctype.h search_list.h \ |
| source.h symtab.h cg_arcs.h sym_ids.h corefile.h |
| utils.o: utils.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/demangle.h \ |
| $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h search_list.h \ |
| source.h symtab.h cg_arcs.h utils.h corefile.h |
| i386.o: i386.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h search_list.h \ |
| source.h symtab.h cg_arcs.h corefile.h hist.h |
| alpha.o: alpha.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h search_list.h \ |
| source.h symtab.h cg_arcs.h corefile.h hist.h |
| vax.o: vax.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h search_list.h \ |
| source.h symtab.h cg_arcs.h corefile.h hist.h |
| tahoe.o: tahoe.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h search_list.h \ |
| source.h symtab.h cg_arcs.h corefile.h hist.h |
| sparc.o: sparc.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h search_list.h \ |
| source.h symtab.h cg_arcs.h corefile.h hist.h |
| mips.o: mips.c gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \ |
| $(INCDIR)/ansidecl.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \ |
| ../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h search_list.h \ |
| source.h symtab.h cg_arcs.h corefile.h hist.h |
| flat_bl.o: flat_bl.c $(INCDIR)/ansidecl.h |
| bsd_callg_bl.o: bsd_callg_bl.c $(INCDIR)/ansidecl.h |
| fsf_callg_bl.o: fsf_callg_bl.c $(INCDIR)/ansidecl.h |
| # IF YOU PUT ANYTHING HERE IT WILL GO AWAY |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
