2013-11-20  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (aarch64_pstatefields): Update.

2013-11-19  Catherine Moore  <clm@codesourcery.com>

	* micromips-opc.c (LM): Define.
	(micromips_opcodes): Add LM to load instructions.
	* mips-opc.c (prefe): Add LM attribute.

2013-11-18  Yufeng Zhang  <yufeng.zhang@arm.com>

	Revert

	2013-11-15  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (CPENT): New define.
	(F_READONLY, F_WRITEONLY): Likewise.
	(aarch64_sys_regs): Add trace unit registers.
	(aarch64_sys_reg_readonly_p): New function.
	(aarch64_sys_reg_writeonly_p): Ditto.

2013-11-15  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (CPENT): New define.
	(F_READONLY, F_WRITEONLY): Likewise.
	(aarch64_sys_regs): Add trace unit registers.
	(aarch64_sys_reg_readonly_p): New function.
	(aarch64_sys_reg_writeonly_p): Ditto.

2013-11-15  Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-opc.c (mips_builtin_opcodes): Add RD_2 to "mfcr" and
	"mtcr".

2013-11-11  Catherine Moore  <clm@codesourcery.com>

	* mips-dis.c (print_insn_mips): Use
	INSN_LOAD_MEMORY instead of INSN_LOAD_MEMORY_DELAY.
	(print_insn_micromips): Likewise.
	* mips-opc.c (LDD): Remove.
	(CLD): Include INSN_LOAD_MEMORY.
	(LM): New.
	(mips_builtin_opcodes): Use LM instead of LDD.
        Add LM to load instructions.

2013-11-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/16140
	* i386-gen.c (cpu_flag_init): Remove CpuNop from CPU_K6_2_FLAGS.
	* i386-init.h: Regenerated.

2013-11-05  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (F_DEPRECATED): New macro.
	(aarch64_sys_regs): Update; flag "spsr_svc" and "spsr_hyp" with
	F_DEPRECATED.
	(aarch64_print_operand): Call aarch64_sys_reg_deprecated_p on
	AARCH64_OPND_SYSREG.

2013-11-05  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-dis.c (convert_ubfm_to_lsl): Check for cond != '111x'.
	(convert_from_csel): Likewise.
	* aarch64-opc.c (operand_general_constraint_met_p): Handle
	AARCH64_OPND_CLASS_COND and AARCH64_OPND_COND1.
	(aarch64_print_operand): Handle AARCH64_OPND_COND1.
	* aarch64-tbl.h (aarch64_opcode_table): Use COND1 instead of
	COND for cinc, cset, cinv, csetm and cneg.
	(AARCH64_OPERANDS): Add entry for AARCH64_OPND_COND1.
	* aarch64-asm-2.c: Re-generated.
	* aarch64-dis-2.c: Ditto.
	* aarch64-opc-2.c: Ditto.

2013-11-05  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (set_syntax_error): New function.
	(operand_general_constraint_met_p): Replace set_other_error
	with set_syntax_error.

2013-10-30  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-dis.c (init_disasm): Default to full 'zarch' opcode
	availability even for 31-bit programs.

2013-10-15  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* arm-dis.c (neon_opcodes): Adjust print string for vshll.

2013-10-14  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

	* micromips-opc.c (decode_micromips_operand): Add +T, +U, +V, +W,
	+d, +e, +h, +k, +l, +n, +o, +u, +v, +w, +x,
	+~, +!, +@, +#, +$, +%, +^, +&, +*, +|.
	(MSA): New define.
	(MSA64): New define.
	(micromips_opcodes): Add MSA instructions.
	* mips-dis.c (msa_control_names): New array.
	(mips_abi_choice): Add ASE_MSA to mips32r2.
	Remove ASE_MDMX from mips64r2.
	Add ASE_MSA and ASE_MSA64 to mips64r2.
	(parse_mips_dis_option): Handle -Mmsa.
	(print_reg): Handle cases for OP_REG_MSA and OP_REG_MSA_CTRL.
	(print_insn_arg): Handle cases for OP_IMM_INDEX and OP_REG_INDEX.
	(print_mips_disassembler_options): Print -Mmsa.
	* mips-opc.c (decode_mips_operand): Add +T, +U, +V, +W, +d, +e, +h, +k,
	+l, +n, +o, +u, +v, +w, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|.
	(MSA): New define.
	(MSA64): New define.
	(mips_builtin_op): Add MSA instructions.

2013-10-13  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-opc.c (nios2_builtin_reg): Use "sstatus" rather than "ba"
	as the primary name of r30.

2013-10-12  Jan Beulich <jbeulich@suse.com>

	* i386-dis.c (intel_operand_size): Move v_bnd_mode alongside the
	default case.
	(OP_E_register): Move v_bnd_mode alongside m_mode.
	* i386-opc.tbl (bndcl, bndcu, bndcn): Split 32- and 64-bit variants.
	Drop Reg16 and Disp16. Add NoRex64.
	(bndmk, bndmov, bndldx, bndstx): Drop Disp16.
	* i386-tbl.h: Re-generate.

2013-10-10  Sean Keys <skeys@ipdatasys.com>

	* xgate-opc.c (xgate_opcode): Remove short_hand field from opcode
	table.
	* xgate-dis.c (print_insn): Refactor to work with table change.

2013-10-10  Roland McGrath  <mcgrathr@google.com>

	* i386-dis.c (oappend_maybe_intel): New function.
	(OP_ST, OP_STi, append_seg, OP_I, OP_I64, OP_sI, OP_ESreg): Use it.
	(OP_C, OP_T, CMP_Fixup, OP_EX_VexImmW): Likewise.
	(VCMP_Fixup, VPCMP_Fixup, PCLMUL_Fixup): Likewise.

	* cr16-opc.c (REG): Cast NAME to 'reg' enum type to suppress
	possible compiler warnings when the union's initializer is
	actually meant for the 'preg' enum typed member.
	* crx-opc.c (REG): Likewise.

	* v850-dis.c (v850_cacheop_codes, v850_prefop_codes):
	Remove duplicate const qualifier.

2013-10-08  Jan Beulich <jbeulich@suse.com>

	* i386-opc.tbl (invlpg): Use Anysize instead of Unspecified.
	(clflush): Use Anysize instead of Byte|Unspecified.
	(prefetch*): Likewise.
	* i386-tbl.h: Re-generate.

2013-10-07  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

	* micromips-opc.c (micromips_opcodes): Fix dmfgc0 and dmtgc0.

2013-09-30  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Add Size64 to movq/vmovq with Reg64 operand.
	* i386-init.h: Regenerated.

2013-09-30  Saravanan Ekanathan <saravanan.ekanathan@amd.com>

	* i386-gen.c (cpu_flag_init): Add CPU_BDVER4_FLAGS.
	* i386-init.h: Regenerated.

2013-09-20  Alan Modra  <amodra@gmail.com>

	* configure: Regenerate.

2013-09-17  Richard Sandiford  <rsandifo@linux.vnet.ibm.com>

	* s390-opc.txt (clih): Make the immediate unsigned.

2013-09-04  Roland McGrath  <mcgrathr@google.com>

	PR gas/15914
	* arm-dis.c (arm_opcodes): Add udf.
	(thumb_opcodes): Use "udf" mnemonic rather than UNDEFINED_INSTRUCTION.
	(thumb32_opcodes): Add udf.w.
	(print_insn_thumb32): Handle %H as the thumb32_opcodes comment says.

2013-09-02  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

	* s390-opc.txt: Fix description for fiebra, fidbra, and fixbra.
	For the load fp integer instructions only the suppression flag was
	new with z196 version.

2013-08-28  Nick Clifton  <nickc@redhat.com>

	* aarch64-opc.c (aarch64_logical_immediate_p): Return FALSE if the
	immediate is not suitable for the 32-bit ABI.

2013-08-23  Maciej W. Rozycki  <macro@codesourcery.com>

	* micromips-opc.c (micromips_opcodes): Use RD_4 for "alnv.ps",
	replacing NODS.

2013-08-23  Yuri Chornoivan  <yurchor@ukr.net>

	PR binutils/15834
	* aarch64-asm.c: Fix typos.
	* aarch64-dis.c: Likewise.
	* msp430-dis.c: Likewise.

2013-08-19  Richard Sandiford  <rdsandiford@googlemail.com>

	* micromips-opc.c (micromips_opcodes): Replace "dext" and "dins"
	macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases.
	Use +H rather than +C for the real "dext".
	* mips-opc.c (mips_builtin_opcodes): Likewise.

2013-08-19  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-formats.h (OPTIONAL_REG, OPTIONAL_MAPPED_REG): New macros.
	* micromips-opc.c (decode_micromips_operand): Use OPTIONAL_REG
	and OPTIONAL_MAPPED_REG.
	* mips-opc.c (decode_mips_operand): Likewise.
	* mips16-opc.c (decode_mips16_operand): Likewise.
	* mips-dis.c (print_insn_arg): Handle OP_OPTIONAL_REG.

2013-08-19  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (PREFIX_EVEX_0F3A3E): Removed.
	(PREFIX_EVEX_0F3A3F): Likewise.
	* i386-dis-evex.h (evex_table): Updated.

2013-08-06  Jürgen Urban  <JuergenUrban@gmx.de>

	* mips-opc.c (mips_builtin_opcodes): Add a suffixless version of
	VCLIPW.

2013-08-05  Eric Botcazou  <ebotcazou@adacore.com>
            Konrad Eisele  <konrad@gaisler.com>

	* sparc-dis.c (compute_arch_mask): Set SPARC_OPCODE_ARCH_LEON bit for
	bfd_mach_sparc.
	* sparc-opc.c (MASK_LEON): Define.
	(v6, v6notlet, v7, v8, v6notv9): Add MASK_LEON.
	(letandleon): New macro.
	(v9andleon): Likewise.
	(sparc_opc): Add leon.
	(umac): Enable for letandleon.
	(smac): Likewise.
	(casa): Enable for v9andleon.
	(cas): Likewise.
	(casl): Likewise.

2013-08-04  Jürgen Urban  <JuergenUrban@gmx.de>
	    Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
	OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
	(print_vu0_channel): New function.
	(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
	(print_insn_args): Handle '#'.
	(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
	* mips-opc.c (mips_vu0_channel_mask): New constant.
	(decode_mips_operand): Handle new VU0 operand types.
	(VU0, VU0CH): New macros.
	(mips_builtin_opcodes): Add VU0 opcodes.  Use "+7" rather than "E"
	for LQC2 and SQC2.  Use "+9" rather than "G" for EE CFC2 and CTC2.
	Use "+6" rather than "G" for QMFC2 and QMTC2.

2013-08-03  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-formats.h (PCREL): Reorder parameters and update the definition
	to match new mips_pcrel_operand layout.
	(JUMP, JALX, BRANCH): Update accordingly.
	* mips16-opc.c (decode_mips16_operand): Likewise.

2013-08-01  Richard Sandiford  <rdsandiford@googlemail.com>

	* micromips-opc.c (WR_s): Delete.

2013-08-01  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI):
	New macros.
	(WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R)
	(WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete.
	(mips_builtin_opcodes): Use the new position-based read-write flags
	instead of field-based ones.  Use UDI for "udi..." instructions.
	* mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2):
	New macros.
	(WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete.
	(RD_T, WR_T, WR_31): Redefine using generic INSN_* flags.
	(WR_SP, RD_16): New macros.
	(RD_SP): Redefine as an INSN2_* flag.
	(MOD_SP): Redefine in terms of RD_SP and WR_SP.
	(mips16_opcodes): Use the new position-based read-write flags
	instead of field-based ones.  Use RD_16 for "nop".  Move RD_SP to
	pinfo2 field.
	* micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2):
	New macros.
	(WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj)
	(WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D)
	(WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete.
	(RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP.
	(micromips_opcodes): Use the new position-based read-write flags
	instead of field-based ones.
	* mips-dis.c (print_insn_arg): Use mips_decode_reg_operand.
	(print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead
	of field-based flags.

2013-08-01  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags.
	(WR_SP): Replace with...
	(MOD_SP): ...this.
	(mips16_opcodes): Update accordingly.
	* mips-dis.c (print_insn_mips16): Likewise.

2013-08-01  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips16-opc.c (mips16_opcodes): Reformat.

2013-08-01  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Remove WR_* and RD_* flags
	for operands that are hard-coded to $0.
	* micromips-opc.c (micromips_opcodes): Likewise.

2013-08-01  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Use WR_31 rather than WR_d
	for the single-operand forms of JALR and JALR.HB.
	* micromips-opc.c (micromips_opcodes): Likewise JALR, JALRS, JALR.HB
	and JALRS.HB.

2013-08-01  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Add FP_D to VR5400 vector
	instructions.  Fix them to use WR_MACC instead of WR_CC and
	add missing RD_MACCs.

2013-08-01  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-dis.c (print_mips16_insn_arg): Include ISA bit in base address.

2013-07-29  Peter Bergner <bergner@vnet.ibm.com>

	* ppc-dis.c (powerpc_init_dialect): Use ppc_parse_cpu() to set dialect.

2013-07-26  Sergey Guriev  <sergey.s.guriev@intel.com>
	    Alexander Ivchenko  <alexander.ivchenko@intel.com>
	    Maxim Kuznetsov  <maxim.kuznetsov@intel.com>
	    Sergey Lega  <sergey.s.lega@intel.com>
	    Anna Tikhonova  <anna.tikhonova@intel.com>
	    Ilya Tocar  <ilya.tocar@intel.com>
	    Andrey Turetskiy  <andrey.turetskiy@intel.com>
	    Ilya Verbin  <ilya.verbin@intel.com>
	    Kirill Yukhin  <kirill.yukhin@intel.com>
	    Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

	* i386-dis-evex.h: New.
	* i386-dis.c (OP_Rounding): New.
	(VPCMP_Fixup): New.
	(OP_Mask): New.
	(Rdq): New.
	(XMxmmq): New.
	(EXdScalarS): New.
	(EXymm): New.
	(EXEvexHalfBcstXmmq): New.
	(EXxmm_mdq): New.
	(EXEvexXGscat): New.
	(EXEvexXNoBcst): New.
	(VPCMP): New.
	(EXxEVexR): New.
	(EXxEVexS): New.
	(XMask): New.
	(MaskG): New.
	(MaskE): New.
	(MaskR): New.
	(MaskVex): New.
	(modes enum): Add evex_x_gscat_mode, evex_x_nobcst_mode,
	evex_half_bcst_xmmq_mode, xmm_mdq_mode, ymm_mode,
	evex_rounding_mode, evex_sae_mode, mask_mode.
	(USE_EVEX_TABLE): New.
	(EVEX_TABLE): New.
	(EVEX enum): New.
	(REG enum): Add REG_EVEX_0F72, REG_EVEX_0F73, REG_EVEX_0F38C6,
	REG_EVEX_0F38C7.
	(MOD enum): Add MOD_EVEX_0F10_PREFIX_1, MOD_EVEX_0F10_PREFIX_3,
	MOD_EVEX_0F11_PREFIX_1, MOD_EVEX_0F11_PREFIX_3,
	MOD_EVEX_0F12_PREFIX_0, MOD_EVEX_0F16_PREFIX_0, MOD_EVEX_0F38C6_REG_1,
	MOD_EVEX_0F38C6_REG_2, MOD_EVEX_0F38C6_REG_5, MOD_EVEX_0F38C6_REG_6,
	MOD_EVEX_0F38C7_REG_1, MOD_EVEX_0F38C7_REG_2,  MOD_EVEX_0F38C7_REG_5,
	MOD_EVEX_0F38C7_REG_6.
	(PREFIX enum): Add PREFIX_VEX_0F41, PREFIX_VEX_0F42, PREFIX_VEX_0F44,
	PREFIX_VEX_0F45, PREFIX_VEX_0F46, PREFIX_VEX_0F47, PREFIX_VEX_0F4B,
	PREFIX_VEX_0F90, PREFIX_VEX_0F91, PREFIX_VEX_0F92, PREFIX_VEX_0F93,
	PREFIX_VEX_0F98, PREFIX_VEX_0F3A30, PREFIX_VEX_0F3A32,
	PREFIX_VEX_0F3AF0, PREFIX_EVEX_0F10, PREFIX_EVEX_0F11,
	PREFIX_EVEX_0F12, PREFIX_EVEX_0F13, PREFIX_EVEX_0F14,
	PREFIX_EVEX_0F15, PREFIX_EVEX_0F16, PREFIX_EVEX_0F17,
	PREFIX_EVEX_0F28, PREFIX_EVEX_0F29, PREFIX_EVEX_0F2A,
	PREFIX_EVEX_0F2B, PREFIX_EVEX_0F2C, PREFIX_EVEX_0F2D,
	PREFIX_EVEX_0F2E, PREFIX_EVEX_0F2F, PREFIX_EVEX_0F51,
	PREFIX_EVEX_0F58, PREFIX_EVEX_0F59, PREFIX_EVEX_0F5A,
	PREFIX_EVEX_0F5B, PREFIX_EVEX_0F5C, PREFIX_EVEX_0F5D,
	PREFIX_EVEX_0F5E, PREFIX_EVEX_0F5F, PREFIX_EVEX_0F62,
	PREFIX_EVEX_0F66, PREFIX_EVEX_0F6A, PREFIX_EVEX_0F6C,
	PREFIX_EVEX_0F6D, PREFIX_EVEX_0F6E, PREFIX_EVEX_0F6F,
	PREFIX_EVEX_0F70, PREFIX_EVEX_0F72_REG_0, PREFIX_EVEX_0F72_REG_1,
	PREFIX_EVEX_0F72_REG_2, PREFIX_EVEX_0F72_REG_4,
	PREFIX_EVEX_0F72_REG_6, PREFIX_EVEX_0F73_REG_2,
	PREFIX_EVEX_0F73_REG_6, PREFIX_EVEX_0F76, PREFIX_EVEX_0F78,
	PREFIX_EVEX_0F79, PREFIX_EVEX_0F7A, PREFIX_EVEX_0F7B,
	PREFIX_EVEX_0F7E, PREFIX_EVEX_0F7F, PREFIX_EVEX_0FC2,
	PREFIX_EVEX_0FC6, PREFIX_EVEX_0FD2, PREFIX_EVEX_0FD3,
	PREFIX_EVEX_0FD4, PREFIX_EVEX_0FD6, PREFIX_EVEX_0FDB,
	PREFIX_EVEX_0FDF, PREFIX_EVEX_0FE2, PREFIX_EVEX_0FE6 PREFIX_EVEX_0FE7,
	PREFIX_EVEX_0FEB, PREFIX_EVEX_0FEF, PREFIX_EVEX_0FF2,
	PREFIX_EVEX_0FF3, PREFIX_EVEX_0FF4, PREFIX_EVEX_0FFA, PREFIX_EVEX_0FFB,
	PREFIX_EVEX_0FFE, PREFIX_EVEX_0F380C, PREFIX_EVEX_0F380D,
	PREFIX_EVEX_0F3811, PREFIX_EVEX_0F3812, PREFIX_EVEX_0F3813,
	PREFIX_EVEX_0F3814, PREFIX_EVEX_0F3815, PREFIX_EVEX_0F3816,
	PREFIX_EVEX_0F3818, PREFIX_EVEX_0F3819, PREFIX_EVEX_0F381A,
	PREFIX_EVEX_0F381B, PREFIX_EVEX_0F381E, PREFIX_EVEX_0F381F,
	PREFIX_EVEX_0F3821, PREFIX_EVEX_0F3822, PREFIX_EVEX_0F3823,
	PREFIX_EVEX_0F3824, PREFIX_EVEX_0F3825, PREFIX_EVEX_0F3827,
	PREFIX_EVEX_0F3828, PREFIX_EVEX_0F3829, PREFIX_EVEX_0F382A,
	PREFIX_EVEX_0F382C, PREFIX_EVEX_0F382D, PREFIX_EVEX_0F3831,
	PREFIX_EVEX_0F3832, PREFIX_EVEX_0F3833, PREFIX_EVEX_0F3834,
	PREFIX_EVEX_0F3835, PREFIX_EVEX_0F3836, PREFIX_EVEX_0F3837,
	PREFIX_EVEX_0F3839, PREFIX_EVEX_0F383A, PREFIX_EVEX_0F383B,
	PREFIX_EVEX_0F383D, PREFIX_EVEX_0F383F, PREFIX_EVEX_0F3840,
	PREFIX_EVEX_0F3842, PREFIX_EVEX_0F3843, PREFIX_EVEX_0F3844,
	PREFIX_EVEX_0F3845, PREFIX_EVEX_0F3846, PREFIX_EVEX_0F3847,
	PREFIX_EVEX_0F384C, PREFIX_EVEX_0F384D, PREFIX_EVEX_0F384E,
	PREFIX_EVEX_0F384F, PREFIX_EVEX_0F3858, PREFIX_EVEX_0F3859,
	PREFIX_EVEX_0F385A, PREFIX_EVEX_0F385B, PREFIX_EVEX_0F3864,
	PREFIX_EVEX_0F3865, PREFIX_EVEX_0F3876, PREFIX_EVEX_0F3877,
	PREFIX_EVEX_0F387C, PREFIX_EVEX_0F387E, PREFIX_EVEX_0F387F,
	PREFIX_EVEX_0F3888, PREFIX_EVEX_0F3889, PREFIX_EVEX_0F388A,
	PREFIX_EVEX_0F388B, PREFIX_EVEX_0F3890, PREFIX_EVEX_0F3891,
	PREFIX_EVEX_0F3892, PREFIX_EVEX_0F3893, PREFIX_EVEX_0F3896,
	PREFIX_EVEX_0F3897, PREFIX_EVEX_0F3898, PREFIX_EVEX_0F3899,
	PREFIX_EVEX_0F389A, PREFIX_EVEX_0F389B, PREFIX_EVEX_0F389C,
	PREFIX_EVEX_0F389D, PREFIX_EVEX_0F389E, PREFIX_EVEX_0F389F,
	PREFIX_EVEX_0F38A0, PREFIX_EVEX_0F38A1, PREFIX_EVEX_0F38A2,
	PREFIX_EVEX_0F38A3, PREFIX_EVEX_0F38A6, PREFIX_EVEX_0F38A7,
	PREFIX_EVEX_0F38A8, PREFIX_EVEX_0F38A9, PREFIX_EVEX_0F38AA,
	PREFIX_EVEX_0F38AB, PREFIX_EVEX_0F38AC, PREFIX_EVEX_0F38AD,
	PREFIX_EVEX_0F38AE, PREFIX_EVEX_0F38AF, PREFIX_EVEX_0F38B6,
	PREFIX_EVEX_0F38B7, PREFIX_EVEX_0F38B8, PREFIX_EVEX_0F38B9,
	PREFIX_EVEX_0F38BA, PREFIX_EVEX_0F38BB, PREFIX_EVEX_0F38BC,
	PREFIX_EVEX_0F38BD, PREFIX_EVEX_0F38BE, PREFIX_EVEX_0F38BF,
	PREFIX_EVEX_0F38C4, PREFIX_EVEX_0F38C6_REG_1,
	PREFIX_EVEX_0F38C6_REG_2, PREFIX_EVEX_0F38C6_REG_5,
	PREFIX_EVEX_0F38C6_REG_6, PREFIX_EVEX_0F38C7_REG_1,
	PREFIX_EVEX_0F38C7_REG_2, PREFIX_EVEX_0F38C7_REG_5,
	PREFIX_EVEX_0F38C7_REG_6, PREFIX_EVEX_0F38C8, PREFIX_EVEX_0F38CA,
	PREFIX_EVEX_0F38CB, PREFIX_EVEX_0F38CC, PREFIX_EVEX_0F38CD,
	PREFIX_EVEX_0F3A00,  PREFIX_EVEX_0F3A01, PREFIX_EVEX_0F3A03,
	PREFIX_EVEX_0F3A04, PREFIX_EVEX_0F3A05, PREFIX_EVEX_0F3A08,
	PREFIX_EVEX_0F3A09, PREFIX_EVEX_0F3A0A, PREFIX_EVEX_0F3A0B,
	PREFIX_EVEX_0F3A17, PREFIX_EVEX_0F3A18, PREFIX_EVEX_0F3A19,
	PREFIX_EVEX_0F3A1A, PREFIX_EVEX_0F3A1B, PREFIX_EVEX_0F3A1D,
	PREFIX_EVEX_0F3A1E, PREFIX_EVEX_0F3A1F, PREFIX_EVEX_0F3A21,
	PREFIX_EVEX_0F3A23, PREFIX_EVEX_0F3A25, PREFIX_EVEX_0F3A26,
	PREFIX_EVEX_0F3A27, PREFIX_EVEX_0F3A38, PREFIX_EVEX_0F3A39,
	PREFIX_EVEX_0F3A3A, PREFIX_EVEX_0F3A3B, PREFIX_EVEX_0F3A3E,
	PREFIX_EVEX_0F3A3F, PREFIX_EVEX_0F3A43, PREFIX_EVEX_0F3A54,
	PREFIX_EVEX_0F3A55.
	(VEX_LEN enum): Add VEX_LEN_0F41_P_0, VEX_LEN_0F42_P_0, VEX_LEN_0F44_P_0,
	VEX_LEN_0F45_P_0, VEX_LEN_0F46_P_0, VEX_LEN_0F47_P_0,
	VEX_LEN_0F4B_P_2, VEX_LEN_0F90_P_0, VEX_LEN_0F91_P_0,
	VEX_LEN_0F92_P_0, VEX_LEN_0F93_P_0, VEX_LEN_0F98_P_0,
	VEX_LEN_0F3A30_P_2, VEX_LEN_0F3A32_P_2, VEX_W_0F41_P_0_LEN_1,
	VEX_W_0F42_P_0_LEN_1, VEX_W_0F44_P_0_LEN_0, VEX_W_0F45_P_0_LEN_1,
	VEX_W_0F46_P_0_LEN_1, VEX_W_0F47_P_0_LEN_1, VEX_W_0F4B_P_2_LEN_1,
	VEX_W_0F90_P_0_LEN_0, VEX_W_0F91_P_0_LEN_0, VEX_W_0F92_P_0_LEN_0,
	VEX_W_0F93_P_0_LEN_0, VEX_W_0F98_P_0_LEN_0, VEX_W_0F3A30_P_2_LEN_0,
	VEX_W_0F3A32_P_2_LEN_0.
	(VEX_W enum): Add EVEX_W_0F10_P_0, EVEX_W_0F10_P_1_M_0,
	EVEX_W_0F10_P_1_M_1, EVEX_W_0F10_P_2, EVEX_W_0F10_P_3_M_0,
	EVEX_W_0F10_P_3_M_1, EVEX_W_0F11_P_0, EVEX_W_0F11_P_1_M_0,
	EVEX_W_0F11_P_1_M_1, EVEX_W_0F11_P_2, EVEX_W_0F11_P_3_M_0,
	EVEX_W_0F11_P_3_M_1, EVEX_W_0F12_P_0_M_0, EVEX_W_0F12_P_0_M_1,
	EVEX_W_0F12_P_1, EVEX_W_0F12_P_2, EVEX_W_0F12_P_3, EVEX_W_0F13_P_0,
	EVEX_W_0F13_P_2, EVEX_W_0F14_P_0, EVEX_W_0F14_P_2, EVEX_W_0F15_P_0,
	EVEX_W_0F15_P_2, EVEX_W_0F16_P_0_M_0, EVEX_W_0F16_P_0_M_1,
	EVEX_W_0F16_P_1, EVEX_W_0F16_P_2, EVEX_W_0F17_P_0, EVEX_W_0F17_P_2,
	EVEX_W_0F28_P_0, EVEX_W_0F28_P_2, EVEX_W_0F29_P_0, EVEX_W_0F29_P_2,
	EVEX_W_0F2A_P_1, EVEX_W_0F2A_P_3, EVEX_W_0F2B_P_0, EVEX_W_0F2B_P_2,
	EVEX_W_0F2E_P_0, EVEX_W_0F2E_P_2, EVEX_W_0F2F_P_0, EVEX_W_0F2F_P_2,
	EVEX_W_0F51_P_0, EVEX_W_0F51_P_1, EVEX_W_0F51_P_2, EVEX_W_0F51_P_3,
	EVEX_W_0F58_P_0, EVEX_W_0F58_P_1, EVEX_W_0F58_P_2, EVEX_W_0F58_P_3,
	EVEX_W_0F59_P_0, EVEX_W_0F59_P_1, EVEX_W_0F59_P_2, EVEX_W_0F59_P_3,
	EVEX_W_0F5A_P_0, EVEX_W_0F5A_P_1, EVEX_W_0F5A_P_2, EVEX_W_0F5A_P_3,
	EVEX_W_0F5B_P_0, EVEX_W_0F5B_P_1, EVEX_W_0F5B_P_2, EVEX_W_0F5C_P_0,
	EVEX_W_0F5C_P_1, EVEX_W_0F5C_P_2, EVEX_W_0F5C_P_3, EVEX_W_0F5D_P_0,
	EVEX_W_0F5D_P_1, EVEX_W_0F5D_P_2, EVEX_W_0F5D_P_3, EVEX_W_0F5E_P_0,
	EVEX_W_0F5E_P_1, EVEX_W_0F5E_P_2, EVEX_W_0F5E_P_3, EVEX_W_0F5F_P_0,
	EVEX_W_0F5F_P_1, EVEX_W_0F5F_P_2, EVEX_W_0F5F_P_3, EVEX_W_0F62_P_2,
	EVEX_W_0F66_P_2, EVEX_W_0F6A_P_2, EVEX_W_0F6C_P_2, EVEX_W_0F6D_P_2,
	EVEX_W_0F6E_P_2, EVEX_W_0F6F_P_1, EVEX_W_0F6F_P_2, EVEX_W_0F70_P_2,
	EVEX_W_0F72_R_2_P_2, EVEX_W_0F72_R_6_P_2, EVEX_W_0F73_R_2_P_2,
	EVEX_W_0F73_R_6_P_2, EVEX_W_0F76_P_2, EVEX_W_0F78_P_0,
	EVEX_W_0F79_P_0, EVEX_W_0F7A_P_1, EVEX_W_0F7A_P_3, EVEX_W_0F7B_P_1,
	EVEX_W_0F7B_P_3, EVEX_W_0F7E_P_1, EVEX_W_0F7E_P_2, EVEX_W_0F7F_P_1,
	EVEX_W_0F7F_P_2, EVEX_W_0FC2_P_0, EVEX_W_0FC2_P_1, EVEX_W_0FC2_P_2,
	EVEX_W_0FC2_P_3, EVEX_W_0FC6_P_0, EVEX_W_0FC6_P_2, EVEX_W_0FD2_P_2,
	EVEX_W_0FD3_P_2, EVEX_W_0FD4_P_2, EVEX_W_0FD6_P_2, EVEX_W_0FE6_P_1,
	EVEX_W_0FE6_P_2, EVEX_W_0FE6_P_3, EVEX_W_0FE7_P_2, EVEX_W_0FF2_P_2,
	EVEX_W_0FF3_P_2, EVEX_W_0FF4_P_2, EVEX_W_0FFA_P_2, EVEX_W_0FFB_P_2,
	EVEX_W_0FFE_P_2, EVEX_W_0F380C_P_2, EVEX_W_0F380D_P_2,
	EVEX_W_0F3811_P_1, EVEX_W_0F3812_P_1, EVEX_W_0F3813_P_1,
	EVEX_W_0F3813_P_2, EVEX_W_0F3814_P_1, EVEX_W_0F3815_P_1,
	EVEX_W_0F3818_P_2, EVEX_W_0F3819_P_2, EVEX_W_0F381A_P_2,
	EVEX_W_0F381B_P_2, EVEX_W_0F381E_P_2, EVEX_W_0F381F_P_2,
	EVEX_W_0F3821_P_1, EVEX_W_0F3822_P_1, EVEX_W_0F3823_P_1,
	EVEX_W_0F3824_P_1, EVEX_W_0F3825_P_1, EVEX_W_0F3825_P_2,
	EVEX_W_0F3828_P_2, EVEX_W_0F3829_P_2, EVEX_W_0F382A_P_1,
	EVEX_W_0F382A_P_2, EVEX_W_0F3831_P_1, EVEX_W_0F3832_P_1,
	EVEX_W_0F3833_P_1, EVEX_W_0F3834_P_1, EVEX_W_0F3835_P_1,
	EVEX_W_0F3835_P_2, EVEX_W_0F3837_P_2, EVEX_W_0F383A_P_1,
	EVEX_W_0F3840_P_2, EVEX_W_0F3858_P_2, EVEX_W_0F3859_P_2,
	EVEX_W_0F385A_P_2, EVEX_W_0F385B_P_2, EVEX_W_0F3891_P_2,
	EVEX_W_0F3893_P_2, EVEX_W_0F38A1_P_2, EVEX_W_0F38A3_P_2,
	EVEX_W_0F38C7_R_1_P_2, EVEX_W_0F38C7_R_2_P_2, EVEX_W_0F38C7_R_5_P_2,
	EVEX_W_0F38C7_R_6_P_2, EVEX_W_0F3A00_P_2, EVEX_W_0F3A01_P_2,
	EVEX_W_0F3A04_P_2, EVEX_W_0F3A05_P_2, EVEX_W_0F3A08_P_2,
	EVEX_W_0F3A09_P_2, EVEX_W_0F3A0A_P_2, EVEX_W_0F3A0B_P_2,
	EVEX_W_0F3A18_P_2, EVEX_W_0F3A19_P_2, EVEX_W_0F3A1A_P_2,
	EVEX_W_0F3A1B_P_2, EVEX_W_0F3A1D_P_2, EVEX_W_0F3A21_P_2,
	EVEX_W_0F3A23_P_2, EVEX_W_0F3A38_P_2, EVEX_W_0F3A39_P_2,
	EVEX_W_0F3A3A_P_2, EVEX_W_0F3A3B_P_2, EVEX_W_0F3A43_P_2.
	(struct vex): Add fields evex, r, v, mask_register_specifier,
	zeroing, ll, b.
	(intel_names_xmm): Add upper 16 registers.
	(att_names_xmm): Ditto.
	(intel_names_ymm): Ditto.
	(att_names_ymm): Ditto.
	(names_zmm): New.
	(intel_names_zmm): Ditto.
	(att_names_zmm): Ditto.
	(names_mask): Ditto.
	(intel_names_mask): Ditto.
	(att_names_mask): Ditto.
	(names_rounding): Ditto.
	(names_broadcast): Ditto.
	(x86_64_table): Add escape to evex-table.
	(reg_table): Include reg_table evex-entries from
	i386-dis-evex.h.  Fix prefetchwt1 instruction.
	(prefix_table): Add entries for new instructions.
	(vex_table): Ditto.
	(vex_len_table): Ditto.
	(vex_w_table): Ditto.
	(mod_table): Ditto.
	(get_valid_dis386): Properly handle new instructions.
	(print_insn): Handle zmm and mask registers, print mask operand.
	(intel_operand_size): Support EVEX, new modes and sizes.
	(OP_E_register): Handle new modes.
	(OP_E_memory): Ditto.
	(OP_G): Ditto.
	(OP_XMM): Ditto.
	(OP_EX): Ditto.
	(OP_VEX): Ditto.
	* i386-gen.c (cpu_flag_init): Update CPU_ANY_SSE_FLAGS and
	CPU_ANY_AVX_FLAGS.  Add CPU_AVX512F_FLAGS, CPU_AVX512CD_FLAGS,
	CPU_AVX512ER_FLAGS and CPU_AVX512PF_FLAGS.
	(cpu_flags): Add CpuAVX512F, CpuAVX512CD, CpuAVX512ER,
	CpuAVX512PF and CpuVREX.
	(operand_type_init): Add OPERAND_TYPE_REGZMM,
	OPERAND_TYPE_REGMASK and OPERAND_TYPE_VEC_DISP8.
	(opcode_modifiers): Add EVex, Masking, VecESize, Broadcast,
	StaticRounding, SAE, Disp8MemShift, NoDefMask.
	(operand_types): Add RegZMM, RegMask, Vec_Disp8, Zmmword.
	* i386-init.h: Regenerate.
	* i386-opc.h (CpuAVX512F): New.
	(CpuAVX512CD): New.
	(CpuAVX512ER): New.
	(CpuAVX512PF): New.
	(CpuVREX): New.
	(i386_cpu_flags): Add cpuavx512f, cpuavx512cd, cpuavx512er,
	cpuavx512pf and cpuvrex fields.
	(VecSIB): Add VecSIB512.
	(EVex): New.
	(Masking): New.
	(VecESize): New.
	(Broadcast): New.
	(StaticRounding): New.
	(SAE): New.
	(Disp8MemShift): New.
	(NoDefMask): New.
	(i386_opcode_modifier): Add evex, masking, vecesize, broadcast,
	staticrounding, sae, disp8memshift and nodefmask.
	(RegZMM): New.
	(Zmmword): Ditto.
	(Vec_Disp8): Ditto.
	(i386_operand_type): Add regzmm, regmask, zmmword and vec_disp8
	fields.
	(RegVRex): New.
	* i386-opc.tbl: Add AVX512 instructions.
	* i386-reg.tbl: Add 16 upper XMM and YMM registers, 32 new ZMM
	registers, mask registers.
	* i386-tbl.h: Regenerate.

2013-07-25  Aaro Koskinen  <aaro.koskinen@iki.fi>

	PR gas/15220
	* mips-opc.c (mips_builtin_opcodes): Fix wrong opcodes for
	Loongson 2F madd.ps, msub.ps, nmadd.ps and nmsub.ps.

2013-07-25  Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

	* i386-dis.c (PREFIX enum): Add PREFIX_0F38C8, PREFIX_0F38C9,
	PREFIX_0F38CA, PREFIX_0F38CB, PREFIX_0F38CC, PREFIX_0F38CD,
	PREFIX_0F3ACC.
	(prefix_table): Updated.
	(three_byte_table): Likewise.
	* i386-gen.c (cpu_flag_init): Add CPU_SHA_FLAGS.
	(cpu_flags): Add CpuSHA.
	(i386_cpu_flags): Add cpusha.
	* i386-init.h: Regenerate.
	* i386-opc.h (CpuSHA): New.
	(CpuUnused): Restored.
	(i386_cpu_flags): Add cpusha.
	* i386-opc.tbl: Add SHA instructions.
	* i386-tbl.h: Regenerate.

2013-07-24  Anna Tikhonova  <anna.tikhonova@intel.com>
	    Kirill Yukhin  <kirill.yukhin@intel.com>
	    Michael Zolotukhin  <michael.v.zolotukhin@intel.com>

	* i386-dis.c (BND_Fixup): New.
	(Ebnd): New.
	(Ev_bnd): New.
	(Gbnd): New.
	(BND): New.
	(v_bnd_mode): New.
	(bnd_mode): New.
	(MOD enum): Add MOD_0F1A_PREFIX_0, MOD_0F1B_PREFIX_0,
	MOD_0F1B_PREFIX_1.
	(PREFIX enum): Add PREFIX_0F1A, PREFIX_0F1B.
	(dis tables): Replace XX with BND for near branch and call
	instructions.
	(prefix_table): Add new entries.
	(mod_table): Likewise.
	(names_bnd): New.
	(intel_names_bnd): New.
	(att_names_bnd): New.
	(BND_PREFIX): New.
	(prefix_name): Handle BND_PREFIX.
	(print_insn): Initialize names_bnd.
	(intel_operand_size): Handle new modes.
	(OP_E_register): Likewise.
	(OP_E_memory): Likewise.
	(OP_G): Likewise.
	* i386-gen.c (cpu_flag_init): Add CpuMPX.
	(cpu_flags): Add CpuMPX.
	(operand_type_init): Add RegBND.
	(opcode_modifiers): Add BNDPrefixOk.
	(operand_types): Add RegBND.
	* i386-init.h: Regenerate.
	* i386-opc.h (CpuMPX): New.
	(CpuUnused): Comment out.
	(i386_cpu_flags): Add cpumpx.
	(BNDPrefixOk): New.
	(i386_opcode_modifier): Add bndprefixok.
	(RegBND): New.
	(i386_operand_type): Add regbnd.
	* i386-opc.tbl: Add BNDPrefixOk to near jumps, calls and rets.
	Add MPX instructions and bnd prefix.
	* i386-reg.tbl: Add bnd0-bnd3 registers.
	* i386-tbl.h: Regenerate.

2013-07-17  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-formats.h (MAPPED_INT, MAPPED_REG, REG_PAIR): Add
	ATTRIBUTE_UNUSED.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* Makefile.am (mips-opc.lo, micromips-opc.lo, mips16-opc.lo): Remove
	special rules.
	* Makefile.in: Regenerate.
	* mips-opc.c, micromips-opc.c, mips16-opc.c: Explicitly initialize
	all fields.  Reformat.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips16-opc.c: Include mips-formats.h.
	(reg_0_map, reg_29_map, reg_31_map, reg_m16_map, reg32r_map): New
	static arrays.
	(decode_mips16_operand): New function.
	* mips-dis.c (mips16_to_32_reg_map, mips16_reg_names): Delete.
	(print_insn_arg): Handle OP_ENTRY_EXIT list.
	Abort for OP_SAVE_RESTORE_LIST.
	(print_mips16_insn_arg): Change interface.  Use mips_operand
	structures.  Delete GET_OP_S.  Move GET_OP definition to...
	(print_insn_mips16): ...here.  Call init_print_arg_state.
	Update the call to print_mips16_insn_arg.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-formats.h: New file.
	* mips-opc.c: Include mips-formats.h.
	(reg_0_map): New static array.
	(decode_mips_operand): New function.
	* micromips-opc.c: Remove <stdio.h> include.  Include mips-formats.h.
	(reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map)
	(reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map)
	(int_c_map): New static arrays.
	(decode_micromips_operand): New function.
	* mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
	(micromips_to_32_reg_d_map, micromips_to_32_reg_e_map)
	(micromips_to_32_reg_f_map, micromips_to_32_reg_g_map)
	(micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2)
	(micromips_to_32_reg_l_map, micromips_to_32_reg_m_map)
	(micromips_to_32_reg_n_map, micromips_to_32_reg_q_map)
	(micromips_imm_b_map, micromips_imm_c_map): Delete.
	(print_reg): New function.
	(mips_print_arg_state): New structure.
	(init_print_arg_state, print_insn_arg): New functions.
	(print_insn_args): Change interface and use mips_operand structures.
	Delete GET_OP_S.  Move GET_OP definition to...
	(print_insn_mips): ...here.  Update the call to print_insn_args.
	(print_insn_micromips): Use print_insn_args.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips16-opc.c (mips16_opcodes): Use "I" for immediate operands
	in macros.

2013-07-14  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Use "S,T" rather than "V,T" for
	ADDA.S, MULA.S and SUBA.S.

2013-07-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/13572
	* i386-opc.tbl: Replace Xmmword with Qword on cvttps2pi.
	* i386-tbl.h: Regenerated.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Remove o(b) macros.  Move LD
	and SD A(B) macros up.
	* micromips-opc.c (micromips_opcodes): Likewise.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips16-opc.c: Add entries for argumentless "entry" and "exit"
	instructions.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
	MDMX-like instructions.
	* mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
	printing "Q" operands for INSN_5400 instructions.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and
	"+S" for "cins".
	* mips-dis.c (print_mips_arg): Update "+s" and "+S" comments.
	Combine cases.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
	"jalx".
	* mips16-opc.c (mips16_opcodes): Likewise.
	* micromips-opc.c (micromips_opcodes): Likewise.
	* mips-dis.c (print_insn_args, print_mips16_insn_arg)
	(print_insn_mips16): Handle "+i".
	(print_insn_micromips): Likewise.  Conditionally preserve the
	ISA bit for "a" but not for "+i".

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* micromips-opc.c (WR_mhi): Rename to..
	(WR_mh): ...this.
	(micromips_opcodes): Update "movep" entry accordingly.  Replace
	"mh,mi" with "mh".
	* mips-dis.c (micromips_to_32_reg_h_map): Rename to...
	(micromips_to_32_reg_h_map1): ...this.
	(micromips_to_32_reg_i_map): Rename to...
	(micromips_to_32_reg_h_map2): ...this.
	(print_micromips_insn): Remove "mi" case.  Print both registers
	in the pair for "mh".

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
	* micromips-opc.c (micromips_opcodes): Likewise.
	* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
	and "+T" handling.  Check for a "0" suffix when deciding whether to
	use coprocessor 0 names.  In that case, also check for ",H" selectors.

2013-07-05  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

	* s390-opc.c (J12_12, J24_24): New macros.
	(INSTR_MII_UPI): Rename to INSTR_MII_UPP.
	(MASK_MII_UPI): Rename to MASK_MII_UPP.
	* s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction.

2013-07-04  Alan Modra  <amodra@gmail.com>

	* ppc-opc.c (powerpc_opcodes): Add tdui, twui, tdu, twu, tui, tu.

2013-06-26  Nick Clifton  <nickc@redhat.com>

	* rx-decode.opc (rx_decode_opcode): Check sd field as well as ss
	field when checking for type 2 nop.
	* rx-decode.c: Regenerate.

2013-06-25  Maciej W. Rozycki  <macro@codesourcery.com>

	* micromips-opc.c (micromips_opcodes): Add "jraddiusp", "jrc"
	and "movep" macros.

2013-06-24  Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-dis.c (is_mips16_plt_tail): New function.
	(print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
	word.
	(is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.

2013-06-21  DJ Delorie  <dj@redhat.com>

	* msp430-decode.opc: New.
	* msp430-decode.c: New/generated.
	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add msp430-decode.c.
	(MAINTAINER_CLEANFILES): Likewise.
	Add rule to build msp430-decode.c frommsp430decode.opc
        using the opc2c program.
	* Makefile.in: Regenerate.
	* configure.in: Add msp430-decode.lo to msp430 architecture files.
	* configure: Regenerate.

2013-06-20  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-dis.c (EMBEDDED_ENV): Remove the check on it.
	(SYMTAB_AVAILABLE): Removed.
	(#include "elf/aarch64.h): Ditto.

2013-06-17  Catherine Moore  <clm@codesourcery.com>
	    Maciej W. Rozycki  <macro@codesourcery.com>
	    Chao-Ying Fu  <fu@mips.com>

	* micromips-opc.c (EVA): Define.
	(TLBINV): Define.
	(micromips_opcodes): Add EVA opcodes.
	* mips-dis.c (mips_arch_choices): Update for ASE_EVA.
	(print_insn_args): Handle EVA offsets.
	(print_insn_micromips): Likewise.
	* mips-opc.c (EVA): Define.
	(TLBINV): Define.
	(mips_builtin_opcodes): Add EVA opcodes.

2013-06-17  Alan Modra  <amodra@gmail.com>

	* Makefile.am (mips-opc.lo): Add rules to create automatic
	dependency files.  Pass archdefs.
	(micromips-opc.lo, mips16-opc.lo): Likewise.
	* Makefile.in: Regenerate.

2013-06-14  DJ Delorie  <dj@redhat.com>

	* rx-decode.opc (rx_decode_opcode): Bit operations on
	registers are 32-bit operations, not 8-bit operations.
	* rx-decode.c: Regenerate.

2013-06-13  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

	* micromips-opc.c (IVIRT): New define.
	(IVIRT64): New define.
	(micromips_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
 	tlbginv, tlbginvf, tlbgp, tlbgr, tlbgwi, tlbgwr VIRT instructions.

	* mips-dis.c (print_insn_micromips): Handle mfgc0, mtgc0, dmfgc0,
	dmtgc0 to print cp0 names.

2013-06-09  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-opc.c (nios2_builtin_opcodes): Give "trap" a type-"b"
	argument.

2013-06-08  Catherine Moore  <clm@codesourcery.com>
	    Richard Sandiford  <rdsandiford@googlemail.com>

	* micromips-opc.c (D32, D33, MC): Update definitions.
 	(micromips_opcodes):  Initialize ase field.
	* mips-dis.c (mips_arch_choice): Add ase field.
	(mips_arch_choices): Initialize ase field.
	(set_default_mips_dis_options): Declare and setup mips_ase.
	* mips-opc.c (M3D, SMT, MX, IVIRT, IVIRT64, D32, D33, D64,
	MT32, MC): Update definitions.
	(mips_builtin_opcodes): Initialize ase field.

2013-05-24  Richard Sandiford  <rsandifo@linux.vnet.ibm.com>

	* s390-opc.txt (flogr): Require a register pair destination.

2013-05-23  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

	* s390-opc.c: Fix length operand in RSL_LRDFU and RSL_LRDFEU
	instruction format.

2013-05-22  Jürgen Urban  <JuergenUrban@gmx.de>

	* mips-opc.c (mips_builtin_opcodes): Add R5900 VU0 instructions.

2013-05-20  Peter Bergner <bergner@vnet.ibm.com>

	* ppc-dis.c (powerpc_init_dialect): Set default dialect to power8.
	* ppc-opc.c (BHRBE, ST, SIX, PS, SXL, VXPS_MASK, XX1RB_MASK,
	XLS_MASK, PPCVSX2): New defines.
	(powerpc_opcodes) <bcdadd., bcdsub., bctar, bctar, bctarl, clrbhrb,
	fmrgew, fmrgow, lqarx, lxsiwax, lxsiwzx, lxsspx, mfbhrbe,
	mffprd, mffprwz, mfvrd, mfvrwz, mfvsrd, mfvsrwz, msgclrp, msgsndp,
	mtfprd, mtfprwa, mtfprwz, mtsle, mtvrd, mtvrwa, mtvrwz, mtvsrd,
	mtvsrwa, mtvsrwz, pbt., rfebb, stqcx., stxsiwx, stxsspx,
	vaddcuq, vaddecuq, vaddeuqm, vaddudm, vadduqm, vbpermq, vcipher,
	vcipherlast, vclzb, vclzd, vclzh, vclzw, vcmpequd, vcmpequd.,
	vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud., veqv, vgbbd, vmaxsd,
	vmaxud, vminsd, vminud, vmrgew, vmrgow, vmulesw, vmuleuw, vmulosw,
	vmulouw, vmuluwm, vnand, vncipher, vncipherlast, vorc, vpermxor,
	vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd, vpmsumh,
	vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox,
	vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq,
	vsubeuqm, vsubudm, vsubuqm, vupkhsw, vupklsw, waitasec, xsaddsp,
	xscvdpspn, xscvspdpn, xscvsxdsp, xscvuxdsp, xsdivsp, xsmaddasp,
	xsmaddmsp, xsmsubasp, xsmsubmsp, xsmulsp, xsnmaddasp, xsnmaddmsp,
	xsnmsubasp, xsnmsubmsp, xsresp, xsrsp, xsrsqrtesp, xssqrtsp,
	xssubsp, xxleqv, xxlnand, xxlorc>: New instructions.
	<lxvx, stxvx>: New extended mnemonics.

2013-05-17  Alan Modra  <amodra@gmail.com>

	* ia64-raw.tbl: Replace non-ASCII char.
	* ia64-waw.tbl: Likewise.
	* ia64-asmtab.c: Regenerate.

2013-05-15  Saravanan Ekanathan <saravanan.ekanathan@amd.com>

	* i386-gen.c (cpu_flag_init): Add CpuFSGSBase in CPU_BDVER3_FLAGS.
	* i386-init.h: Regenerated.

2013-05-13  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Remove assertion.
	* aarch64-opc.c (operand_general_constraint_met_p): Relax the range
	check from [0, 255] to [-128, 255].

2013-05-09  Andrew Pinski  <apinski@cavium.com>

	* mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2.
	Add INSN_VIRT and INSN_VIRT64 to mips64r2.
	(parse_mips_dis_option): Handle the virt option.
	(print_insn_args): Handle "+J".
	(print_mips_disassembler_options): Print out message about virt64.
	* mips-opc.c (IVIRT): New define.
	(IVIRT64): New define.
	(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
	tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions.
	Move rfe to the bottom as it conflicts with tlbgp.

2013-05-09  Alan Modra  <amodra@gmail.com>

	* ppc-opc.c (extract_vlesi): Properly sign extend.
	(extract_vlensi): Likewise.  Comment reason for setting invalid.

2013-05-02  Nick Clifton  <nickc@redhat.com>

	* msp430-dis.c: Add support for MSP430X instructions.

2013-04-24  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-opc.c (nios2_builtin_reg): Rename "fstatus" control register
	to "eccinj".

2013-04-17  Wei-chen Wang  <cole945@gmail.com>

	PR binutils/15369
	* cgen-dis.c (hash_insn_array): Use CGEN_CPU_INSN_ENDIAN instead
	of CGEN_CPU_ENDIAN.
	(hash_insns_list): Likewise.

2013-04-10  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* rl78-dis.c (print_insn_rl78): Use alternative form as a GCC false
	warning workaround.

2013-04-08  Jan Beulich <jbeulich@suse.com>

	* i386-opc.tbl: Fold 64-bit and non-64-bit jecxz entries.
	* i386-tbl.h: Re-generate.

2013-04-06  David S. Miller  <davem@davemloft.net>

	* sparc-dis.c (compare_opcodes): When encountering multiple aliases
	of an opcode, prefer the one with F_PREFERRED set.
	* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
	lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
	ops.  Make 64-bit VIS logical ops have "d" suffix in their names,
	mark existing mnenomics as aliases.  Add "cc" suffix to edge
	instructions generating condition codes, mark existing mnenomics
	as aliases.  Add "fp" prefix to VIS compare instructions, mark
	existing mnenomics as aliases.

2013-04-03  Nick Clifton  <nickc@redhat.com>

	* v850-dis.c (print_value): With V850_INVERSE_PCREL compute the
	destination address by subtracting the operand from the current
	address.
	* v850-opc.c (insert_u16_loop): Disallow negative offsets.  Store
	a positive value in the insn.
	(extract_u16_loop): Do not negate the returned value.
	(D16_LOOP): Add V850_INVERSE_PCREL flag.

	(ceilf.sw): Remove duplicate entry.
	(cvtf.hs): New entry.
	(cvtf.sh): Likewise.
	(fmaf.s): Likewise.
	(fmsf.s): Likewise.
	(fnmaf.s): Likewise.
	(fnmsf.s): Likewise.
	(maddf.s): Restrict to E3V5 architectures.
	(msubf.s): Likewise.
	(nmaddf.s): Likewise.
	(nmsubf.s): Likewise.

2013-03-27  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (get_sib): Add the sizeflag argument.  Properly
	check address mode.
	(print_insn): Pass sizeflag to get_sib.

2013-03-27  Alexis Deruelle  <alexis.deruelle@gmail.com>

	PR binutils/15068
	* tic6x-dis.c: Add support for displaying 16-bit insns.

2013-03-20  Alexis Deruelle  <alexis.deruelle@gmail.com>

	PR gas/15095
	* tic6x-dis.c (print_insn_tic6x): Decode opcodes that have
	individual msb and lsb halves in src1 & src2 fields.  Discard the
	src1 (lsb) value and only use src2 (msb), discarding bit 0, to
	follow what Ti SDK does in that case as any value in the src1
	field yields the same output with SDK disassembler.

2013-03-12  Michael Eager <eager@eagercon.com>

	* opcodes/mips-dis.c (print_insn_args): Modify def of reg.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* nios2-opc.c (nios2_builtin_opcodes): Add entry for wrprs.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* nios2-opc.c (nios2_builtin_opcodes): Add entry for rdprs.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* nios2-opc.c (nios2_builtin_regs): Add sstatus alias for ba register.

2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* arm-dis.c (arm_opcodes): Add entries for CRC instructions.
	(thumb32_opcodes): Likewise.
	(print_insn_thumb32): Handle 'S' control char.

2013-03-08  Yann Sionneau  <yann.sionneau@gmail.com>

	* lm32-desc.c: Regenerate.

2013-03-01  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-reg.tbl (riz): Add RegRex64.
	* i386-tbl.h: Regenerated.

2013-02-28  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-tbl.h (QL_I3SAMEW, QL_I3WWX): New macros.
	(aarch64_feature_crc): New static.
	(CRC): New macro.
	(aarch64_opcode_table): Add entries for the crc32b, crc32h, crc32w,
	crc32x, crc32cb, crc32ch, crc32cw and crc32cx instructions.
	* aarch64-asm-2.c: Re-generate.
	* aarch64-dis-2.c: Ditto.
	* aarch64-opc-2.c: Ditto.

2013-02-27  Alan Modra  <amodra@gmail.com>

	* rl78-decode.opc (rl78_decode_opcode): Fix typo.
	* rl78-decode.c: Regenerate.

2013-02-25  Kaushik Phatak  <Kaushik.Phatak@kpitcummins.com>

	* rl78-decode.opc: Fix encoding of DIVWU insn.
	* rl78-decode.c: Regenerate.

2013-02-19  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/15159
	* i386-dis.c (rm_table): Add clac and stac to RM_0F01_REG_1.

	* i386-gen.c (cpu_flag_init): Add CPU_SMAP_FLAGS.
	(cpu_flags): Add CpuSMAP.

	* i386-opc.h (CpuSMAP): New.
	(i386_cpu_flags): Add cpusmap.

	* i386-opc.tbl: Add clac and stac.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2013-02-15  Markos Chandras  <markos.chandras@imgtec.com>

	* metag-dis.c: Initialize outf->bytes_per_chunk to 4
	which also makes the disassembler output be in little
	endian like it should be.

2013-02-14  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (aarch64_prfops): Change unnamed operation 'name'
	fields to NULL.
	(aarch64_print_operand): Adjust the printing for AARCH64_OPND_PRFOP.

2013-02-13  Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-dis.c (is_compressed_mode_p): Only match symbols from the
	section disassembled.

2013-02-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* arm-dis.c: Update strht pattern.

2013-02-09  Jürgen Urban  <JuergenUrban@gmx.de>

	* mips-opc.c (mips_builtin_opcodes): Enable l.d and s.d macros for
	single-float.  Disable ll, lld, sc and scd for EE.  Disable the
	trunc.w.s macro for EE.

2013-02-06  Sandra Loosemore  <sandra@codesourcery.com>
            Andrew Jenner <andrew@codesourcery.com>

	Based on patches from Altera Corporation.

	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and
	nios2-opc.c.
	* Makefile.in: Regenerated.
	* configure.in: Add case for bfd_nios2_arch.
	* configure: Regenerated.
	* disassemble.c (ARCH_nios2): Define.
	(disassembler): Add case for bfd_arch_nios2.
	* nios2-dis.c: New file.
	* nios2-opc.c: New file.

2013-02-04  Alan Modra  <amodra@gmail.com>

	* po/POTFILES.in: Regenerate.
	* rl78-decode.c: Regenerate.
	* rx-decode.c: Regenerate.

2013-01-30  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-tbl.h (aarch64_opcode_table): Flag sshll, sshll2, ushll and
	ushll2 with F_HAS_ALIAS.  Add entries for sxtl, sxtl2, uxtl and uxtl2.
	* aarch64-asm.c (convert_xtl_to_shll): New function.
	(convert_to_real): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by
	calling convert_xtl_to_shll.
	* aarch64-dis.c (convert_shll_to_xtl): New function.
	(convert_to_alias): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by
	calling convert_shll_to_xtl.
	* aarch64-gen.c: Update copyright year.
	* aarch64-asm-2.c: Re-generate.
	* aarch64-dis-2.c: Re-generate.
	* aarch64-opc-2.c: Re-generate.

2013-01-24  Nick Clifton  <nickc@redhat.com>

	* v850-dis.c: Add support for e3v5 architecture.
	* v850-opc.c: Likewise.

2013-01-17  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Handle 8-bit MOVI.
	* aarch64-dis.c (aarch64_ext_advsimd_imm_modified): Likewise.
	* aarch64-opc.c (operand_general_constraint_met_p): For
	AARCH64_MOD_LSL, move the range check on the shift amount before the
	alignment check; change to call set_sft_amount_out_of_range_error
	instead of set_imm_out_of_range_error.
	* aarch64-tbl.h (QL_SIMD_IMM_B): Replace NIL with LSL.
	(aarch64_opcode_table): Remove the OP enumerator from the asimdimm
	8-bit MOVI entry; change the 2nd operand from SIMD_IMM to
	SIMD_IMM_SFT.

2013-01-16  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (operand_type_init): Add OPERAND_TYPE_IMM32_64.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2013-01-15  Nick Clifton  <nickc@redhat.com>

	* v850-dis.c (get_operand_value): Sign extend V850E_IMMEDIATE
	values.
	* v850-opc.c (IMM16LO): Add V850_OPERAND_SIGNED attribute.

2013-01-14  Will Newton <will.newton@imgtec.com>

	* metag-dis.c (REG_WIDTH): Increase to 64.

2013-01-10  Peter Bergner <bergner@vnet.ibm.com>

	* ppc-dis.c (ppc_opts): Add "power8", "pwr8" and "htm" entries.
	* ppc-opc.c (HTM_R, HTM_SI, XRTRB_MASK, XRTRARB_MASK, XRTLRARB_MASK,
	XRTARARB_MASK, XRTBFRARB_MASK, XRCL, POWER8, PPCHTM): New defines.
	(SH6): Update.
	<"tabort.", "tabortdc.", "tabortdci.", "tabortwc.",
	"tabortwci.", "tbegin.", "tcheck", "tend.", "trechkpt.",
	"treclaim.", "tsr.">: Add POWER8 HTM opcodes.
	<"tendall.", "tresume.", "tsuspend.">: Add POWER8 HTM extended opcodes.

2013-01-10  Will Newton <will.newton@imgtec.com>

	* Makefile.am: Add Meta.
	* configure.in: Add Meta.
	* disassemble.c: Add Meta support.
	* metag-dis.c: New file.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

2013-01-07  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

	* cr16-dis.c (make_instruction): Rename to cr16_make_instruction.
	(match_opcode): Rename to cr16_match_opcode.

2013-01-04  Juergen Urban <JuergenUrban@gmx.de>

	* mips-dis.c: Add names for CP0 registers of r5900.
	* mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for
	instructions sq and lq.
	Add support for MIPS r5900 CPU.
	Add support for 128 bit MMI (Multimedia Instructions).
	Add support for EE instructions (Emotion Engine).
	Disable unsupported floating point instructions (64 bit and
	undefined compare operations).
	Enable instructions of MIPS ISA IV which are supported by r5900.
	Disable 64 bit co processor instructions.
	Disable 64 bit multiplication and division instructions.
	Disable instructions for co-processor 2 and 3, because these are
	not supported (preparation for later VU0 support (Vector Unit)).
	Disable cvt.w.s because this behaves like trunc.w.s and the
	correct execution can't be ensured on r5900.
	Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This
	will confuse less developers and compilers.

2013-01-04  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (aarch64_print_operand): Change to print
	AARCH64_OPND_IMM_MOV in hexadecimal in the instruction and in decimal
	in comment.
	* aarch64-tbl.h (aarch64_opcode_table): Remove the 'F_PSEUDO' flag
	from the opcode entries of OP_MOV_IMM_LOG, OP_MOV_IMM_WIDEN and
	OP_MOV_IMM_WIDE.

2013-01-04  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (aarch64_prfops): Update to support PLIL1KEEP,
	PLIL1STRM, PLIL2KEEP, PLIL2STRM, PLIL3KEEP and PLIL3STRM.

2013-01-02  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (process_copyright): Update copyright year to 2013.

2013-01-02  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

	* cr16-dis.c (match_opcode,make_instruction): Remove static
	declaration.
	(dwordU,wordU): Moved typedefs to opcode/cr16.h
	(cr16_words,cr16_allWords,cr16_currInsn): Added prefix 'cr16_'.

For older changes see ChangeLog-2012

Copyright (C) 2013 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: