# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#   Copyright (C) 2012-2019 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3.  If not see
# <http://www.gnu.org/licenses/>.
#
VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/depstand.m4 \
	$(top_srcdir)/../config/gettext-sister.m4 \
	$(top_srcdir)/../config/largefile.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/nls.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/plugins.m4 \
	$(top_srcdir)/../config/po.m4 \
	$(top_srcdir)/../config/progtest.m4 \
	$(top_srcdir)/../config/stdint.m4 \
	$(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
	$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
	$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
	$(top_srcdir)/bfd.m4 $(top_srcdir)/warning.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/version.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo "  DVIPS   " $@;
am__v_DVIPS_1 = 
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
am__v_MAKEINFO_1 = 
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
am__v_INFOHTML_1 = 
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
am__v_TEXI2DVI_1 = 
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
am__v_TEXI2PDF_1 = 
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 = 
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 = 
INFO_DEPS = bfd.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = bfd.dvi
PDFS = bfd.pdf
PSS = bfd.ps
HTMLS = bfd.html
TEXINFOS = bfd.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__installdirs = "$(DESTDIR)$(infodir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(bfd_TEXINFOS) $(srcdir)/Makefile.in \
	$(top_srcdir)/../mkinstalldirs
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BFD_HOSTPTR_T = @BFD_HOSTPTR_T@
BFD_HOST_64BIT_LONG = @BFD_HOST_64BIT_LONG@
BFD_HOST_64BIT_LONG_LONG = @BFD_HOST_64BIT_LONG_LONG@
BFD_HOST_64_BIT = @BFD_HOST_64_BIT@
BFD_HOST_64_BIT_DEFINED = @BFD_HOST_64_BIT_DEFINED@
BFD_HOST_U_64_BIT = @BFD_HOST_U_64_BIT@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
COREFILE = @COREFILE@
COREFLAG = @COREFLAG@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEBUGDIR = @DEBUGDIR@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
FGREP = @FGREP@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBM = @LIBM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
NO_WERROR = @NO_WERROR@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKGVERSION = @PKGVERSION@
POSUB = @POSUB@
RANLIB = @RANLIB@
REPORT_BUGS_TEXI = @REPORT_BUGS_TEXI@
REPORT_BUGS_TO = @REPORT_BUGS_TO@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHARED_LDFLAGS = @SHARED_LDFLAGS@
SHARED_LIBADD = @SHARED_LIBADD@
SHELL = @SHELL@
STRIP = @STRIP@
TDEFINES = @TDEFINES@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
XGETTEXT = @XGETTEXT@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
all_backends = @all_backends@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bfd64_libs = @bfd64_libs@
bfd_backends = @bfd_backends@
bfd_default_target_size = @bfd_default_target_size@
bfd_file_ptr = @bfd_file_ptr@
bfd_machines = @bfd_machines@
bfd_ufile_ptr = @bfd_ufile_ptr@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
havevecs = @havevecs@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_noncanonical = @host_noncanonical@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_cv_dlopen_libs = @lt_cv_dlopen_libs@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
supports_plugins = @supports_plugins@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_noncanonical = @target_noncanonical@
target_os = @target_os@
target_vendor = @target_vendor@
tdefaults = @tdefaults@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
wordsize = @wordsize@
zlibdir = @zlibdir@
zlibinc = @zlibinc@
AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
DOCFILES = aoutx.texi  archive.texi archures.texi \
	bfdt.texi  cache.texi coffcode.texi \
	core.texi elf.texi elfcode.texi  format.texi \
	libbfd.texi bfdwin.texi bfdio.texi \
	opncls.texi  reloc.texi  section.texi  \
	syms.texi  targets.texi init.texi hash.texi linker.texi \
	mmo.texi \
	bfdver.texi

PROTOS = archive.p archures.p bfd.p \
	 core.p format.p \
	bfdio.p bfdwin.p \
	libbfd.p opncls.p reloc.p \
	section.p syms.p targets.p  \
	format.p  core.p init.p

IPROTOS = cache.ip libbfd.ip reloc.ip init.ip archures.ip coffcode.ip

# SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction 
# between VPATH and suffix rules.  If you use GNU Make, perhaps other Makes,
# you don't need these three:
SRCDOC = $(srcdir)/../aoutx.h  $(srcdir)/../archive.c \
	$(srcdir)/../archures.c $(srcdir)/../bfd.c \
	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
	$(srcdir)/../cache.c $(srcdir)/../coffcode.h \
	$(srcdir)/../corefile.c $(srcdir)/../elf.c \
	$(srcdir)/../elfcode.h  $(srcdir)/../format.c \
	$(srcdir)/../libbfd.c $(srcdir)/../opncls.c \
	$(srcdir)/../reloc.c  $(srcdir)/../section.c \
	$(srcdir)/../syms.c  $(srcdir)/../targets.c \
	$(srcdir)/../hash.c $(srcdir)/../linker.c \
	$(srcdir)/../mmo.c

SRCPROT = $(srcdir)/../archive.c $(srcdir)/../archures.c \
	$(srcdir)/../bfd.c $(srcdir)/../coffcode.h $(srcdir)/../corefile.c \
	$(srcdir)/../format.c $(srcdir)/../libbfd.c \
	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
	$(srcdir)/../opncls.c $(srcdir)/../reloc.c \
	$(srcdir)/../section.c $(srcdir)/../syms.c \
	$(srcdir)/../targets.c $(srcdir)/../init.c

SRCIPROT = $(srcdir)/../cache.c $(srcdir)/../libbfd.c \
	$(srcdir)/../bfdio.c $(srcdir)/../bfdwin.c \
	$(srcdir)/../reloc.c $(srcdir)/../cpu-h8300.c \
	$(srcdir)/../cpu-i960.c $(srcdir)/../archures.c \
	$(srcdir)/../init.c

TEXIDIR = $(srcdir)/../../texinfo/fsf
info_TEXINFOS = bfd.texi
bfd_TEXINFOS = $(DOCFILES) bfdsumm.texi
MKDOC = chew$(EXEEXT_FOR_BUILD)
AM_CPPFLAGS = -I.. -I$(srcdir)/.. -I$(srcdir)/../../include \
	-I$(srcdir)/../../intl -I../../intl

LIBBFD_H_DEP = \
	$(srcdir)/../libbfd-in.h	\
	$(srcdir)/../libbfd.c		\
	$(srcdir)/../bfdio.c		\
	$(srcdir)/../bfdwin.c		\
	$(srcdir)/../cache.c		\
	$(srcdir)/../reloc.c		\
	$(srcdir)/../archures.c		\
	$(srcdir)/../linker.c		\
	$(srcdir)/header.sed		\
	$(srcdir)/proto.str		\
	$(MKDOC)

LIBCOFF_H_DEP = \
	$(srcdir)/../libcoff-in.h	\
	$(srcdir)/../coffcode.h		\
	$(srcdir)/header.sed		\
	$(srcdir)/proto.str		\
	$(MKDOC)

BFD_H_DEP = \
	$(srcdir)/../bfd-in.h 		\
	$(srcdir)/../init.c 		\
	$(srcdir)/../opncls.c 		\
	$(srcdir)/../libbfd.c 		\
	$(srcdir)/../bfdio.c		\
	$(srcdir)/../bfdwin.c		\
	$(srcdir)/../section.c 		\
	$(srcdir)/../archures.c		\
	$(srcdir)/../reloc.c		\
	$(srcdir)/../syms.c		\
	$(srcdir)/../bfd.c		\
	$(srcdir)/../archive.c		\
	$(srcdir)/../corefile.c		\
	$(srcdir)/../targets.c		\
	$(srcdir)/../format.c		\
	$(srcdir)/../linker.c		\
	$(srcdir)/../simple.c		\
	$(srcdir)/../compress.c		\
	$(srcdir)/header.sed		\
	$(srcdir)/proto.str		\
	$(srcdir)/../version.h		\
	$(MKDOC)

noinst_TEXINFOS = bfdint.texi
MOSTLYCLEANFILES = $(MKDOC) *.o *.stamp
CLEANFILES = *.p *.ip
DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log
MAINTAINERCLEANFILES = $(DOCFILES) bfd.info
all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .ps
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

bfd.info: bfd.texi $(bfd_TEXINFOS)
	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'bfd.texi' || echo '$(srcdir)/'`bfd.texi; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

bfd.dvi: bfd.texi $(bfd_TEXINFOS) 
	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
	`test -f 'bfd.texi' || echo '$(srcdir)/'`bfd.texi

bfd.pdf: bfd.texi $(bfd_TEXINFOS) 
	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
	`test -f 'bfd.texi' || echo '$(srcdir)/'`bfd.texi

bfd.html: bfd.texi $(bfd_TEXINFOS) 
	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'bfd.texi' || echo '$(srcdir)/'`bfd.texi; \
	then \
	  rm -rf $@ && mv $(@:.html=.htp) $@; \
	else \
	  rm -rf $(@:.html=.htp); exit 1; \
	fi
.dvi.ps:
	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) $(AM_V_texinfo) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf bfd.t2d bfd.t2p

clean-aminfo:
	-test -z "bfd.dvi bfd.pdf bfd.ps bfd.html" \
	|| rm -rf bfd.dvi bfd.pdf bfd.ps bfd.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
tags TAGS:

ctags CTAGS:

cscope cscopelist:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS)
installdirs:
	for dir in "$(DESTDIR)$(infodir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am

install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done
install-exec-am:

install-html: install-html-am

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
	  d2=$$d$$p; \
	  if test -d "$$d2"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d2"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }
install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
	fi; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man:

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-pdf-am uninstall-ps-am

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
	clean-libtool cscopelist-am ctags-am dist-info distclean \
	distclean-generic distclean-libtool distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
	mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \
	pdf-am ps ps-am tags-am uninstall uninstall-am \
	uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-pdf-am uninstall-ps-am

.PRECIOUS: Makefile


$(MKDOC): chew.stamp ; @true
chew.stamp: $(srcdir)/chew.c
	$(CC_FOR_BUILD) -o chw$$$$$(EXEEXT_FOR_BUILD) $(CFLAGS_FOR_BUILD) \
	  $(LDFLAGS_FOR_BUILD) $(H_CFLAGS) $(AM_CPPFLAGS) $(srcdir)/chew.c; \
	$(SHELL) $(srcdir)/../../move-if-change \
	  chw$$$$$(EXEEXT_FOR_BUILD) $(MKDOC); \
	touch $@

protos: libbfd.h libcoff.h bfd.h

# We can't replace these rules with an implicit rule, because
# makes without VPATH support couldn't find the .h files in `..'.

# We do not depend on chew directly so that we can distribute the info
# files, and permit people to rebuild them, without requiring the makeinfo
# program.  If somebody tries to rebuild info, but none of the .texi files
# have changed, then nothing will be rebuilt.

aoutx.texi: aoutx.stamp ; @true
aoutx.stamp: $(srcdir)/../aoutx.h $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../aoutx.h >aoutx.tmp
	test -e aoutx.texi || test ! -f $(srcdir)/aoutx.texi || cp -p $(srcdir)/aoutx.texi .
	$(SHELL) $(srcdir)/../../move-if-change aoutx.tmp aoutx.texi
	touch $@

archive.texi: archive.stamp ; @true
archive.stamp: $(srcdir)/../archive.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../archive.c >archive.tmp
	test -e archive.texi || test ! -f $(srcdir)/archive.texi || cp -p $(srcdir)/archive.texi .
	$(SHELL) $(srcdir)/../../move-if-change archive.tmp archive.texi
	touch $@

archures.texi: archures.stamp ; @true
archures.stamp: $(srcdir)/../archures.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../archures.c >archures.tmp
	test -e archures.texi || test ! -f $(srcdir)/archures.texi || cp -p $(srcdir)/archures.texi .
	$(SHELL) $(srcdir)/../../move-if-change archures.tmp archures.texi
	touch $@

# We use bfdt.texi, rather than bfd.texi, to avoid conflicting with
# bfd.texi on an 8.3 filesystem.
bfdt.texi: bfdt.stamp ; @true
bfdt.stamp: $(srcdir)/../bfd.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfd.c >bfd.tmp
	test -e bfdt.texi || test ! -f $(srcdir)/bfdt.texi || cp -p $(srcdir)/bfdt.texi .
	$(SHELL) $(srcdir)/../../move-if-change bfd.tmp bfdt.texi
	touch $@

cache.texi: cache.stamp ; @true
cache.stamp: $(srcdir)/../cache.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../cache.c >cache.tmp
	test -e cache.texi || test ! -f $(srcdir)/cache.texi || cp -p $(srcdir)/cache.texi .
	$(SHELL) $(srcdir)/../../move-if-change cache.tmp cache.texi
	touch $@

coffcode.texi: coffcode.stamp ; @true
coffcode.stamp: $(srcdir)/../coffcode.h $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../coffcode.h >coffcode.tmp
	test -e coffcode.texi || test ! -f $(srcdir)/coffcode.texi || cp -p $(srcdir)/coffcode.texi .
	$(SHELL) $(srcdir)/../../move-if-change coffcode.tmp coffcode.texi
	touch $@

core.texi: core.stamp ; @true
core.stamp: $(srcdir)/../corefile.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../corefile.c >core.tmp
	test -e core.texi || test ! -f $(srcdir)/core.texi || cp -p $(srcdir)/core.texi .
	$(SHELL) $(srcdir)/../../move-if-change core.tmp core.texi
	touch $@

elf.texi: elf.stamp ; @true
elf.stamp: $(srcdir)/../elf.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../elf.c >elf.tmp
	test -e elf.texi || test ! -f $(srcdir)/elf.texi || cp -p $(srcdir)/elf.texi .
	$(SHELL) $(srcdir)/../../move-if-change elf.tmp elf.texi
	touch $@

elfcode.texi: elfcode.stamp ; @true
elfcode.stamp: $(srcdir)/../elfcode.h $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../elfcode.h >elfcode.tmp
	test -e elfcode.texi || test ! -f $(srcdir)/elfcode.texi || cp -p $(srcdir)/elfcode.texi .
	$(SHELL) $(srcdir)/../../move-if-change elfcode.tmp elfcode.texi
	touch $@

mmo.texi: mmo.stamp ; @true
mmo.stamp: $(srcdir)/../mmo.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../mmo.c >mmo.tmp
	test -e mmo.texi || test ! -f $(srcdir)/mmo.texi || cp -p $(srcdir)/mmo.texi .
	$(SHELL) $(srcdir)/../../move-if-change mmo.tmp mmo.texi
	touch $@

format.texi: format.stamp ; @true
format.stamp: $(srcdir)/../format.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../format.c >format.tmp
	test -e format.texi || test ! -f $(srcdir)/format.texi || cp -p $(srcdir)/format.texi .
	$(SHELL) $(srcdir)/../../move-if-change format.tmp format.texi
	touch $@

libbfd.texi: libbfd.stamp ; @true
libbfd.stamp: $(srcdir)/../libbfd.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../libbfd.c >libbfd.tmp
	test -e libbfd.texi || test ! -f $(srcdir)/libbfd.texi || cp -p $(srcdir)/libbfd.texi .
	$(SHELL) $(srcdir)/../../move-if-change libbfd.tmp libbfd.texi
	touch $@

bfdio.texi: bfdio.stamp ; @true
bfdio.stamp: $(srcdir)/../bfdio.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfdio.c >bfdio.tmp
	test -e bfdio.texi || test ! -f $(srcdir)/bfdio.texi || cp -p $(srcdir)/bfdio.texi .
	$(SHELL) $(srcdir)/../../move-if-change bfdio.tmp bfdio.texi
	touch $@

bfdwin.texi: bfdwin.stamp ; @true
bfdwin.stamp: $(srcdir)/../bfdwin.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../bfdwin.c >bfdwin.tmp
	test -e bfdwin.texi || test ! -f $(srcdir)/bfdwin.texi || cp -p $(srcdir)/bfdwin.texi .
	$(SHELL) $(srcdir)/../../move-if-change bfdwin.tmp bfdwin.texi
	touch $@

opncls.texi: opncls.stamp ; @true
opncls.stamp: $(srcdir)/../opncls.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../opncls.c >opncls.tmp
	test -e opncls.texi || test ! -f $(srcdir)/opncls.texi || cp -p $(srcdir)/opncls.texi .
	$(SHELL) $(srcdir)/../../move-if-change opncls.tmp opncls.texi
	touch $@

reloc.texi: reloc.stamp ; @true
reloc.stamp: $(srcdir)/../reloc.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../reloc.c >reloc.tmp
	test -e reloc.texi || test ! -f $(srcdir)/reloc.texi || cp -p $(srcdir)/reloc.texi .
	$(SHELL) $(srcdir)/../../move-if-change reloc.tmp reloc.texi
	touch $@

section.texi: section.stamp ; @true
section.stamp: $(srcdir)/../section.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../section.c >section.tmp
	test -e section.texi || test ! -f $(srcdir)/section.texi || cp -p $(srcdir)/section.texi .
	$(SHELL) $(srcdir)/../../move-if-change section.tmp section.texi
	touch $@

syms.texi: syms.stamp ; @true
syms.stamp: $(srcdir)/../syms.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../syms.c >syms.tmp
	test -e syms.texi || test ! -f $(srcdir)/syms.texi || cp -p $(srcdir)/syms.texi .
	$(SHELL) $(srcdir)/../../move-if-change syms.tmp syms.texi
	touch $@

targets.texi: targets.stamp ; @true
targets.stamp: $(srcdir)/../targets.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../targets.c >targets.tmp
	test -e targets.texi || test ! -f $(srcdir)/targets.texi || cp -p $(srcdir)/targets.texi .
	$(SHELL) $(srcdir)/../../move-if-change targets.tmp targets.texi
	touch $@

init.texi: init.stamp ; @true
init.stamp: $(srcdir)/../init.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../init.c >init.tmp
	test -e init.texi || test ! -f $(srcdir)/init.texi || cp -p $(srcdir)/init.texi .
	$(SHELL) $(srcdir)/../../move-if-change init.tmp init.texi
	touch $@

hash.texi: hash.stamp ; @true
hash.stamp: $(srcdir)/../hash.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../hash.c >hash.tmp
	test -e hash.texi || test ! -f $(srcdir)/hash.texi || cp -p $(srcdir)/hash.texi .
	$(SHELL) $(srcdir)/../../move-if-change hash.tmp hash.texi
	touch $@

linker.texi: linker.stamp ; @true
linker.stamp: $(srcdir)/../linker.c $(srcdir)/doc.str $(MKDOC)
	./$(MKDOC) -f $(srcdir)/doc.str < $(srcdir)/../linker.c >linker.tmp
	test -e linker.texi || test ! -f $(srcdir)/linker.texi || cp -p $(srcdir)/linker.texi .
	$(SHELL) $(srcdir)/../../move-if-change linker.tmp linker.texi
	touch $@

libbfd.h: $(LIBBFD_H_DEP)
	echo "$(LIBBFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@
	for file in $(LIBBFD_H_DEP); do \
	  case $$file in \
	    *-in.h) cat $$file >> $@ ;; \
	    */header.sed) break ;; \
	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
				-e 's,$$,.  */,' >> $@ ; \
		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
	  esac; \
	done
	echo "#ifdef __cplusplus" >> $@
	echo "}" >> $@
	echo "#endif" >> $@
	echo "#endif" >> $@

libcoff.h: $(LIBCOFF_H_DEP)
	echo "$(LIBCOFF_H_DEP)" | sed -f $(srcdir)/header.sed > $@
	for file in $(LIBCOFF_H_DEP); do \
	  case $$file in \
	    *-in.h) cat $$file >> $@ ;; \
	    */header.sed) break ;; \
	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
				-e 's,$$,.  */,' >> $@ ; \
		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
	  esac; \
	done
	echo "#ifdef __cplusplus" >> $@
	echo "}" >> $@
	echo "#endif" >> $@
	echo "#endif" >> $@

bfd.h: $(BFD_H_DEP)
	echo "$(BFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@
	for file in $(BFD_H_DEP); do \
	  case $$file in \
	    *-in.h) cat $$file >> $@ ;; \
	    */header.sed) break ;; \
	    *)	echo $$file | sed -e 's,.*/,,' -e 's,^,/* Extracted from ,' \
				-e 's,$$,.  */,' >> $@ ; \
		./$(MKDOC) -f $(srcdir)/proto.str < $$file >> $@ ;; \
	  esac; \
	done
	echo "#ifdef __cplusplus" >> $@
	echo "}" >> $@
	echo "#endif" >> $@
	echo "#endif" >> $@

bfdver.texi: $(srcdir)/Makefile.in
	@echo "creating $@"; \
	echo "@set VERSION $(VERSION)" > bfdver.texi; \
	if test -n "$(PKGVERSION)"; then \
	  echo "@set VERSION_PACKAGE $(PKGVERSION)" >> bfdver.texi; \
	fi; \
	echo "@set UPDATED `date '+%B %Y'`" >> bfdver.texi; \
	if test -n "$(REPORT_BUGS_TEXI)"; then \
	  echo "@set BUGURL $(REPORT_BUGS_TEXI)" >> bfdver.texi; \
	fi

# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
install: install-info

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: